[PATCH] Add AMCC PPC405EZ support

This patch adds support for the new AMCC 405EZ PPC. It is in
preparation for the AMCC Acadia board support.

Please note that this Acadia/405EZ support is still in a beta stage.
Still lot's of cleanup needed but we need a preliminary release now.

Signed-off-by: Stefan Roese <sr@denx.de>

12 files changed, 979 insertions, 151 deletions

diff --git a/cpu/ppc4xx/4xx_enet.c b/cpu/ppc4xx/4xx_enet.c
index 4f55583..cf56581 100644
--- a/cpu/ppc4xx/4xx_enet.c
+++ b/cpu/ppc4xx/4xx_enet.c
@@ -1333,6 +1333,9 @@ int enetInt (struct eth_device *dev)
 			}
 		}
 		mtdcr (uicsr, MAL_UIC_DEF|EMAC_UIC_DEF|EMAC_UIC_DEF1);	/* Clear */
+#if defined(CONFIG_405EZ)
+		mtsdr (sdricintstat, SDR_ICRX_STAT | SDR_ICTX0_STAT | SDR_ICTX1_STAT);
+#endif	/* defined(CONFIG_405EZ) */
 	}
 	while (serviced);
 
diff --git a/cpu/ppc4xx/cpu.c b/cpu/ppc4xx/cpu.c
index b02f6f4..2d8740c 100644
--- a/cpu/ppc4xx/cpu.c
+++ b/cpu/ppc4xx/cpu.c
@@ -47,6 +47,9 @@ void board_reset(void);
 
 #if defined(CONFIG_440)
 #define FREQ_EBC		(sys_info.freqEPB)
+#elif defined(CONFIG_405EZ)
+#define FREQ_EBC		((CONFIG_SYS_CLK_FREQ * sys_info.pllFbkDiv) / \
+				 sys_info.pllExtBusDiv)
 #else
 #define FREQ_EBC		(sys_info.freqPLB / sys_info.pllExtBusDiv)
 #endif
@@ -209,7 +212,8 @@ int checkcpu (void)
 
 	puts("AMCC PowerPC 4");
 
-#if defined(CONFIG_405GP) || defined(CONFIG_405CR) || defined(CONFIG_405EP)
+#if defined(CONFIG_405GP) || defined(CONFIG_405CR) || \
+    defined(CONFIG_405EP) || defined(CONFIG_405EZ)
 	puts("05");
 #endif
 #if defined(CONFIG_440)
@@ -257,6 +261,10 @@ int checkcpu (void)
 		puts("EP Rev. B");
 		break;
 
+	case PVR_405EZ_RA:
+		puts("EZ Rev. A");
+		break;
+
 #if defined(CONFIG_440)
 	case PVR_440GP_RB:
 		puts("GP Rev. B");
@@ -386,9 +394,9 @@ int checkcpu (void)
 	}
 
 	printf (" at %s MHz (PLB=%lu, OPB=%lu, EBC=%lu MHz)\n", strmhz(buf, clock),
-	       sys_info.freqPLB / 1000000,
-	       sys_info.freqPLB / sys_info.pllOpbDiv / 1000000,
-	       FREQ_EBC / 1000000);
+		sys_info.freqPLB / 1000000,
+		get_OPB_freq() / 1000000,
+		FREQ_EBC / 1000000);
 
 	if (addstr[0] != 0)
 		printf("       %s\n", addstr);
@@ -418,7 +426,7 @@ int checkcpu (void)
 	putc('\n');
 #endif
 
-#if defined(CONFIG_405EP)
+#if defined(CONFIG_405EP) || defined(CONFIG_405EZ)
 	printf ("       16 kB I-Cache 16 kB D-Cache");
 #elif defined(CONFIG_440)
 	printf ("       32 kB I-Cache 32 kB D-Cache");
diff --git a/cpu/ppc4xx/cpu_init.c b/cpu/ppc4xx/cpu_init.c
index 82ae443..9d1cd13 100644
--- a/cpu/ppc4xx/cpu_init.c
+++ b/cpu/ppc4xx/cpu_init.c
@@ -256,7 +256,8 @@ cpu_init_f (void)
 	 */
 #if (defined(CFG_EBC_PB0AP) && defined(CFG_EBC_PB0CR))
 #if (defined(CONFIG_405GP) || defined(CONFIG_405CR) || \
-     defined(CONFIG_405EP) || defined(CONFIG_405))
+     defined(CONFIG_405EP) || defined(CONFIG_405EZ) || \
+     defined(CONFIG_405))
 	/*
 	 * Move the next instructions into icache, since these modify the flash
 	 * we are running from!
diff --git a/cpu/ppc4xx/serial.c b/cpu/ppc4xx/serial.c
index fab0d95..e62dd9d 100644
--- a/cpu/ppc4xx/serial.c
+++ b/cpu/ppc4xx/serial.c
@@ -264,7 +264,8 @@ int serial_tstc ()
 #endif	/* CONFIG_IOP480 */
 
 /*****************************************************************************/
-#if defined(CONFIG_405GP) || defined(CONFIG_405CR) || defined(CONFIG_405EP) || \
+#if defined(CONFIG_405GP) || defined(CONFIG_405CR) || \
+    defined(CONFIG_405EP) || defined(CONFIG_405EZ) || \
     defined(CONFIG_440)
 
 #if defined(CONFIG_440)
@@ -309,7 +310,7 @@ int serial_tstc ()
 #define MFREG(a, d)	mfsdr(a, d)
 #define MTREG(a, d)	mtsdr(a, d)
 #endif /* #if defined(CONFIG_440GP) */
-#elif defined(CONFIG_405EP)
+#elif defined(CONFIG_405EP) || defined(CONFIG_405EZ)
 #define UART0_BASE      0xef600300
 #define UART1_BASE      0xef600400
 #define UCR0_MASK       0x0000007f
@@ -392,47 +393,95 @@ volatile static serial_buffer_t buf_info;
 
 #if defined(CONFIG_440) && !defined(CFG_EXT_SERIAL_CLOCK)
 static void serial_divs (int baudrate, unsigned long *pudiv,
-			 unsigned short *pbdiv )
+			 unsigned short *pbdiv)
 {
-	sys_info_t	sysinfo;
+	sys_info_t sysinfo;
 	unsigned long div;		/* total divisor udiv * bdiv */
 	unsigned long umin;		/* minimum udiv	*/
-	unsigned short diff;    /* smallest diff */
-	unsigned long udiv;     /* best udiv */
-
-	unsigned short idiff;   /* current diff */
-	unsigned short ibdiv;   /* current bdiv */
+	unsigned short diff;		/* smallest diff */
+	unsigned long udiv;		/* best udiv */
+	unsigned short idiff;		/* current diff */
+	unsigned short ibdiv;		/* current bdiv */
 	unsigned long i;
-	unsigned long est;      /* current estimate */
+	unsigned long est;		/* current estimate */
 
-	get_sys_info( &sysinfo );
+	get_sys_info(&sysinfo);
 
-	udiv = 32;     /* Assume lowest possible serial clk */
-	div = sysinfo.freqPLB/(16*baudrate); /* total divisor */
-	umin = sysinfo.pllOpbDiv<<1; /* 2 x OPB divisor */
-	diff = 32;      /* highest possible */
+	udiv = 32;			/* Assume lowest possible serial clk */
+	div = sysinfo.freqPLB / (16 * baudrate); /* total divisor */
+	umin = sysinfo.pllOpbDiv << 1;	/* 2 x OPB divisor */
+	diff = 32;			/* highest possible */
 
 	/* i is the test udiv value -- start with the largest
 	 * possible (32) to minimize serial clock and constrain
 	 * search to umin.
 	 */
-	for( i = 32; i > umin; i-- ){
-		ibdiv = div/i;
+	for (i = 32; i > umin; i--) {
+		ibdiv = div / i;
 		est = i * ibdiv;
 		idiff = (est > div) ? (est-div) : (div-est);
-		if( idiff == 0 ){
+		if (idiff == 0) {
 			udiv = i;
 			break;      /* can't do better */
-		}
-		else if( idiff < diff ){
+		} else if (idiff < diff) {
 			udiv = i;       /* best so far */
 			diff = idiff;   /* update lowest diff*/
 		}
 	}
 
 	*pudiv = udiv;
-	*pbdiv = div/udiv;
+	*pbdiv = div / udiv;
+}
+
+#elif defined(CONFIG_405EZ)
+
+static void serial_divs (int baudrate, unsigned long *pudiv,
+			 unsigned short *pbdiv)
+{
+	sys_info_t sysinfo;
+	unsigned long div;		/* total divisor udiv * bdiv */
+	unsigned long umin;		/* minimum udiv	*/
+	unsigned short diff;		/* smallest diff */
+	unsigned long udiv;		/* best udiv */
+	unsigned short idiff;		/* current diff */
+	unsigned short ibdiv;		/* current bdiv */
+	unsigned long i;
+	unsigned long est;		/* current estimate */
+	unsigned long plloutb;
+	u32 reg;
+
+	get_sys_info(&sysinfo);
 
+	plloutb = ((CONFIG_SYS_CLK_FREQ * sysinfo.pllFwdDiv * sysinfo.pllFbkDiv)
+		   / sysinfo.pllFwdDivB);
+	udiv = 256;			/* Assume lowest possible serial clk */
+	div = plloutb / (16 * baudrate); /* total divisor */
+	umin = (plloutb / get_OPB_freq()) << 1;	/* 2 x OPB divisor */
+	diff = 256;			/* highest possible */
+
+	/* i is the test udiv value -- start with the largest
+	 * possible (256) to minimize serial clock and constrain
+	 * search to umin.
+	 */
+	for (i = 256; i > umin; i--) {
+		ibdiv = div / i;
+		est = i * ibdiv;
+		idiff = (est > div) ? (est-div) : (div-est);
+		if (idiff == 0) {
+			udiv = i;
+			break;      /* can't do better */
+		} else if (idiff < diff) {
+			udiv = i;       /* best so far */
+			diff = idiff;   /* update lowest diff*/
+		}
+	}
+
+	*pudiv = udiv;
+	mfcpr(cprperd0, reg);
+	reg &= ~0x0000ffff;
+	reg |= ((udiv - 0) << 8) | (udiv - 0);
+	mtcpr(cprperd0, reg);
+	*pbdiv = div / udiv;
 }
 #endif /* defined(CONFIG_440) && !defined(CFG_EXT_SERIAL_CLK) */
 
@@ -518,6 +567,10 @@ int serial_init (void)
 	unsigned short bdiv;
 	volatile char val;
 
+#if defined(CONFIG_405EZ)
+	serial_divs(gd->baudrate, &udiv, &bdiv);
+	clk = tmp = reg = 0;
+#else
 #ifdef CONFIG_405EP
 	reg = mfdcr(cpc0_ucr) & ~(UCR0_MASK | UCR1_MASK);
 	clk = gd->cpu_clk;
@@ -548,9 +601,9 @@ int serial_init (void)
 	reg |= (udiv - 1) << CR0_UDIV_POS;	/* set the UART divisor */
 	mtdcr (cntrl0, reg);
 #endif /* CONFIG_405EP */
-
 	tmp = gd->baudrate * udiv * 16;
 	bdiv = (clk + tmp / 2) / tmp;
+#endif /* CONFIG_405EZ */
 
 	out8(UART_BASE + UART_LCR, 0x80);	/* set DLAB bit */
 	out8(UART_BASE + UART_DLL, bdiv);	/* set baudrate divisor */
diff --git a/cpu/ppc4xx/speed.c b/cpu/ppc4xx/speed.c
index 06220c3..028b11a 100644
--- a/cpu/ppc4xx/speed.c
+++ b/cpu/ppc4xx/speed.c
@@ -767,11 +767,119 @@ ulong get_PCI_freq (void)
 	return val;
 }
 
+#elif defined(CONFIG_405EZ)
+void get_sys_info (PPC405_SYS_INFO * sysInfo)
+{
+	unsigned long cpr_plld;
+	unsigned long cpr_primad;
+	unsigned long sysClkPeriodPs = ONE_BILLION / (CONFIG_SYS_CLK_FREQ/1000);
+	unsigned long primad_cpudv;
+	unsigned long m;
+
+	/*
+	 * Read PLL Mode registers
+	 */
+	mfcpr(cprplld, cpr_plld);
+
+	/*
+	 * Determine forward divider A
+	 */
+	sysInfo->pllFwdDiv = ((cpr_plld & PLLD_FWDVA_MASK) >> 16);
+
+	/*
+	 * Determine forward divider B (should be equal to A)
+	 */
+	sysInfo->pllFwdDivB = ((cpr_plld & PLLD_FWDVB_MASK) >> 8);
+	if (sysInfo->pllFwdDivB == 0) {
+		sysInfo->pllFwdDivB = 8;
+	}
+
+	/*
+	 * Determine FBK_DIV.
+	 */
+	sysInfo->pllFbkDiv = ((cpr_plld & PLLD_FBDV_MASK) >> 24);
+	if (sysInfo->pllFbkDiv == 0) {
+		sysInfo->pllFbkDiv = 256;
+	}
+
+	/*
+	 * Read CPR_PRIMAD register
+	 */
+	mfcpr(cprprimad, cpr_primad);
+	/*
+	 * Determine PLB_DIV.
+	 */
+	sysInfo->pllPlbDiv = ((cpr_primad & PRIMAD_PLBDV_MASK) >> 16);
+	if (sysInfo->pllPlbDiv == 0) {
+		sysInfo->pllPlbDiv = 16;
+	}
+
+	/*
+	 * Determine EXTBUS_DIV.
+	 */
+	sysInfo->pllExtBusDiv = (cpr_primad & PRIMAD_EBCDV_MASK);
+	if (sysInfo->pllExtBusDiv == 0) {
+		sysInfo->pllExtBusDiv = 16;
+	}
+
+	/*
+	 * Determine OPB_DIV.
+	 */
+	sysInfo->pllOpbDiv = ((cpr_primad & PRIMAD_OPBDV_MASK) >> 8);
+	if (sysInfo->pllOpbDiv == 0) {
+		sysInfo->pllOpbDiv = 16;
+	}
+
+	/*
+	 * Determine the M factor
+	 */
+	m = sysInfo->pllFbkDiv * sysInfo->pllFwdDivB;
+
+	/*
+	 * Determine VCO clock frequency
+	 */
+	sysInfo->freqVCOHz = (1000000000000LL * (unsigned long long)m) /
+		(unsigned long long)sysClkPeriodPs;
+
+	/*
+	 * Determine CPU clock frequency
+	 */
+	primad_cpudv = ((cpr_primad & PRIMAD_CPUDV_MASK) >> 24);
+	if (primad_cpudv == 0) {
+		primad_cpudv = 16;
+	}
+
+	sysInfo->freqProcessor = (CONFIG_SYS_CLK_FREQ * sysInfo->pllFbkDiv) / primad_cpudv;
+
+	/*
+	 * Determine PLB clock frequency
+	 */
+	sysInfo->freqPLB = (CONFIG_SYS_CLK_FREQ * sysInfo->pllFbkDiv) / sysInfo->pllPlbDiv;
+}
+
+/********************************************
+ * get_OPB_freq
+ * return OPB bus freq in Hz
+ *********************************************/
+ulong get_OPB_freq (void)
+{
+	ulong val = 0;
+
+	PPC405_SYS_INFO sys_info;
+
+	get_sys_info (&sys_info);
+	val = (CONFIG_SYS_CLK_FREQ * sys_info.pllFbkDiv) / sys_info.pllOpbDiv;
+
+	return val;
+}
+
 #endif
 
 int get_clocks (void)
 {
-#if defined(CONFIG_405GP) || defined(CONFIG_405CR) || defined(CONFIG_440) || defined(CONFIG_405) || defined(CONFIG_405EP)
+#if defined(CONFIG_405GP) || defined(CONFIG_405CR) || \
+    defined(CONFIG_405EP) || defined(CONFIG_405EZ) || \
+    defined(CONFIG_440) || defined(CONFIG_405)
 	sys_info_t sys_info;
 
 	get_sys_info (&sys_info);
@@ -796,7 +904,9 @@ ulong get_bus_freq (ulong dummy)
 {
 	ulong val;
 
-#if defined(CONFIG_405GP) || defined(CONFIG_405CR) || defined(CONFIG_405) || defined(CONFIG_440) || defined(CONFIG_405EP)
+#if defined(CONFIG_405GP) || defined(CONFIG_405CR) || \
+    defined(CONFIG_405EP) || defined(CONFIG_405EZ) || \
+    defined(CONFIG_440) || defined(CONFIG_405)
 	sys_info_t sys_info;
 
 	get_sys_info (&sys_info);
diff --git a/cpu/ppc4xx/start.S b/cpu/ppc4xx/start.S
index 24b30df..a50d66e 100644
--- a/cpu/ppc4xx/start.S
+++ b/cpu/ppc4xx/start.S
@@ -699,7 +699,9 @@ _start:
 #endif	/* CONFIG_IOP480 */
 
 /*****************************************************************************/
-#if defined(CONFIG_405GP) || defined(CONFIG_405CR) || defined(CONFIG_405) || defined(CONFIG_405EP)
+#if defined(CONFIG_405GP) || defined(CONFIG_405CR) || \
+    defined(CONFIG_405EP) || defined(CONFIG_405EZ) || \
+    defined(CONFIG_405)
 	/*----------------------------------------------------------------------- */
 	/* Clear and set up some registers. */
 	/*----------------------------------------------------------------------- */
@@ -727,13 +729,13 @@ _start:
 	/*----------------------------------------------------------------------- */
 	/* Enable two 128MB cachable regions. */
 	/*----------------------------------------------------------------------- */
-	addis	r4,r0,0x8000
-	addi	r4,r4,0x0001
+	lis	r4,0x8000
+	ori	r4,r4,0x0001
 	mticcr	r4			/* instruction cache */
 	isync
 
-	addis	r4,r0,0x0000
-	addi	r4,r4,0x0000
+	lis	r4,0x0000
+	ori	r4,r4,0x0000
 	mtdccr	r4			/* data cache */
 
 #if !(defined(CFG_EBC_PB0AP) && defined(CFG_EBC_PB0CR))
@@ -755,6 +757,70 @@ _start:
 #endif /* CONFIG_405EP */
 
 #if defined(CFG_OCM_DATA_ADDR) && defined(CFG_OCM_DATA_SIZE)
+/* test-only... (clean up later when NAND booting is supported) */
+#if defined(CONFIG_405EZ)
+	/********************************************************************
+	 * Setup OCM - On Chip Memory - PPC405EZ uses OCM Controller V2
+	 *******************************************************************/
+	/*
+	 * We can map the OCM on the PLB3, so map it at
+	 * CFG_OCM_DATA_ADDR + 0x8000
+	 */
+	lis	r3,CFG_OCM_DATA_ADDR@h	/* OCM location */
+	ori	r3,r3,CFG_OCM_DATA_ADDR@l
+	ori	r3,r3,0x8270	/* 32K Offset, 16K for Bank 1, R/W/Enable */
+	mtdcr	ocmplb3cr1,r3		/* Set PLB Access */
+	ori	r3,r3,0x4000		/* Add 0x4000 for bank 2 */
+	mtdcr	ocmplb3cr2,r3		/* Set PLB Access */
+	isync
+
+	lis	r3,CFG_OCM_DATA_ADDR@h  /* OCM location */
+	ori	r3,r3,CFG_OCM_DATA_ADDR@l
+	ori	r3,r3,0x0270            /* 16K for Bank 1, R/W/Enable */
+	mtdcr	ocmdscr1, r3            /* Set Data Side */
+	mtdcr	ocmiscr1, r3            /* Set Instruction Side */
+	ori	r3,r3,0x4000		/* Add 0x4000 for bank 2 */
+	mtdcr	ocmdscr2, r3            /* Set Data Side */
+	mtdcr	ocmiscr2, r3            /* Set Instruction Side */
+	addis	r3,0,0x0800             /* OCM Data Parity Disable - 1 Wait State */
+	mtdcr	ocmdsisdpc,r4
+
+	isync
+
+#if defined(CONFIG_NAND_SPL)
+	/*
+	 * 405EZ can boot from NAND Flash.
+	 * If we are booting the SPL (Pre-loader), copy code from
+	 * the mapped 4K NAND Flash to the OCM
+	 */
+	li	r4,(CFG_NAND_BOOT_SPL_SIZE >> 2) - 1
+	mtctr	r4
+	lis	r2,CFG_NAND_BOOT_SPL_SRC@h
+	ori	r2,r2,CFG_NAND_BOOT_SPL_SRC@l
+	lis	r3,CFG_NAND_BOOT_SPL_DST@h
+	ori	r3,r3,CFG_NAND_BOOT_SPL_DST@l
+spl_loop:
+	lwzu	r4,4(r2)
+	stwu	r4,4(r3)
+	bdnz	spl_loop
+
+	/*
+	 * Jump to code in OCM Ram
+	 */
+	bl 	00f
+00:	mflr	r10
+	lis	r3,(CFG_NAND_BOOT_SPL_SRC - CFG_NAND_BOOT_SPL_DST)@h
+	ori	r3,r3,(CFG_NAND_BOOT_SPL_SRC - CFG_NAND_BOOT_SPL_DST)@l
+	sub	r10,r10,r3
+	addi	r10,r10,28
+	mtlr	r10
+	blr
+start_ram:
+	sync
+	isync
+#endif
+#else
+/* ...test-only */
 	/********************************************************************
 	 * Setup OCM - On Chip Memory
 	 *******************************************************************/
@@ -774,6 +840,7 @@ _start:
 	addis	r4, 0, 0xC000		/* OCM data area enabled */
 	mtdcr	ocmdscntl, r4
 	isync
+#endif /* CONFIG_405EZ */
 #endif
 
 	/*----------------------------------------------------------------------- */
diff --git a/cpu/ppc4xx/usb_ohci.c b/cpu/ppc4xx/usb_ohci.c
index ab852c5..c71a6a9 100644
--- a/cpu/ppc4xx/usb_ohci.c
+++ b/cpu/ppc4xx/usb_ohci.c
@@ -76,7 +76,7 @@
 #define m16_swap(x) swap_16(x)
 #define m32_swap(x) swap_32(x)
 
-#if defined(CONFIG_440EP) || defined(CONFIG_440EPX)
+#if defined(CONFIG_405EZ) || defined(CONFIG_440EP) || defined(CONFIG_440EPX)
 #define ohci_cpu_to_le16(x) (x)
 #define ohci_cpu_to_le32(x) (x)
 #else
@@ -1601,7 +1601,7 @@ int usb_lowlevel_init(void)
 	gohci.irq = -1;
 #if defined(CONFIG_440EP)
  	gohci.regs = (struct ohci_regs *)(CFG_PERIPHERAL_BASE | 0x1000);
-#elif defined(CONFIG_440EPX)
+#elif defined(CONFIG_440EPX) || defined(CFG_USB_HOST)
 	gohci.regs = (struct ohci_regs *)(CFG_USB_HOST);
 #endif
 
@@ -1625,8 +1625,10 @@ int usb_lowlevel_init(void)
 	ohci_inited = 1;
 	urb_finished = 1;
 
+#if defined(CONFIG_440EP) || defined(CONFIG_440EPX)
 	/* init the device driver */
 	usb_dev_init();
+#endif
 
 	return 0;
 }
diff --git a/cpu/ppc4xx/vecnum.h b/cpu/ppc4xx/vecnum.h
index 685d48b..bddf9e5 100644
--- a/cpu/ppc4xx/vecnum.h
+++ b/cpu/ppc4xx/vecnum.h
@@ -231,6 +231,47 @@
 
 #else /* !defined(CONFIG_440) */
 
+#if defined(CONFIG_405EZ)
+#define VECNUM_D0		0	/* DMA channel 0		*/
+#define VECNUM_D1		1	/* DMA channel 1		*/
+#define VECNUM_D2		2	/* DMA channel 2		*/
+#define VECNUM_D3		3	/* DMA channel 3		*/
+#define VECNUM_1588		4	/* IEEE 1588 network synchronization */
+#define VECNUM_U0		5	/* UART0			*/
+#define VECNUM_U1		6	/* UART1			*/
+#define VECNUM_CAN0		7	/* CAN 0			*/
+#define VECNUM_CAN1		8	/* CAN 1			*/
+#define VECNUM_SPI		9	/* SPI				*/
+#define VECNUM_IIC0		10	/* I2C				*/
+#define VECNUM_CHT0		11	/* Chameleon timer high pri interrupt */
+#define VECNUM_CHT1		12	/* Chameleon timer high pri interrupt */
+#define VECNUM_USBH1		13	/* USB Host 1			*/
+#define VECNUM_USBH2		14	/* USB Host 2			*/
+#define VECNUM_USBDEV		15	/* USB Device			*/
+#define VECNUM_ETH0		16	/* 10/100 Ethernet interrupt status */
+#define VECNUM_EWU0		17	/* Ethernet wakeup sequence detected */
+
+#define VECNUM_MADMAL		18	/* Logical OR of following MadMAL int */
+#define VECNUM_MS		18	/*	MAL_SERR_INT 		*/
+#define VECNUM_TXDE		18	/* 	MAL_TXDE_INT 		*/
+#define VECNUM_RXDE		18	/*	MAL_RXDE_INT 		*/
+
+#define VECNUM_MTE		19	/* MAL TXEOB			*/
+#define VECNUM_MTE1		20	/* MAL TXEOB1			*/
+#define VECNUM_MRE		21	/* MAL RXEOB			*/
+#define VECNUM_NAND		22	/* NAND Flash controller	*/
+#define VECNUM_ADC		23	/* ADC				*/
+#define VECNUM_DAC		24	/* DAC				*/
+#define VECNUM_OPB2PLB		25	/* OPB to PLB bridge interrupt	*/
+#define VECNUM_RESERVED0	26	/* Reserved			*/
+#define VECNUM_EIR0		27	/* External interrupt 0		*/
+#define VECNUM_EIR1		28	/* External interrupt 1		*/
+#define VECNUM_EIR2		29	/* External interrupt 2		*/
+#define VECNUM_EIR3		30	/* External interrupt 3		*/
+#define VECNUM_EIR4		31	/* External interrupt 4		*/
+
+#else	/* !CONFIG_405EZ */
+
 #define VECNUM_U0           0           /* UART0                        */
 #define VECNUM_U1           1           /* UART1                        */
 #define VECNUM_D0           5           /* DMA channel 0                */
@@ -251,6 +292,7 @@
 #define VECNUM_EIR4         29          /* External interrupt 4         */
 #define VECNUM_EIR5         30          /* External interrupt 5         */
 #define VECNUM_EIR6         31          /* External interrupt 6         */
+#endif	/* defined(CONFIG_405EZ) */
 
 #endif /* defined(CONFIG_440) */
 
diff --git a/include/asm-ppc/processor.h b/include/asm-ppc/processor.h
index ad9fd49..0585962 100644
--- a/include/asm-ppc/processor.h
+++ b/include/asm-ppc/processor.h
@@ -298,6 +298,10 @@
 #define SPRN_SPRG1	0x111	/* Special Purpose Register General 1 */
 #define SPRN_SPRG2	0x112	/* Special Purpose Register General 2 */
 #define SPRN_SPRG3	0x113	/* Special Purpose Register General 3 */
+#define SPRN_SPRG4	0x114	/* Special Purpose Register General 4 */
+#define SPRN_SPRG5	0x115	/* Special Purpose Register General 5 */
+#define SPRN_SPRG6	0x116	/* Special Purpose Register General 6 */
+#define SPRN_SPRG7	0x117	/* Special Purpose Register General 7 */
 #define SPRN_SRR0	0x01A	/* Save/Restore Register 0 */
 #define SPRN_SRR1	0x01B	/* Save/Restore Register 1 */
 #define SPRN_SRR2	0x3DE	/* Save/Restore Register 2 */
@@ -529,6 +533,10 @@
 #define SPRG1   SPRN_SPRG1
 #define SPRG2   SPRN_SPRG2
 #define SPRG3   SPRN_SPRG3
+#define SPRG4   SPRN_SPRG4
+#define SPRG5   SPRN_SPRG5
+#define SPRG6   SPRN_SPRG6
+#define SPRG7   SPRN_SPRG7
 #define SRR0	SPRN_SRR0	/* Save and Restore Register 0 */
 #define SRR1	SPRN_SRR1	/* Save and Restore Register 1 */
 #define SVR	SPRN_SVR	/* System Version Register */
@@ -731,6 +739,7 @@
 #define PVR_405CR_RC	0x40110145  /* same as pc405gp rev e */
 #define PVR_405EP_RA	0x51210950
 #define PVR_405GPR_RB	0x50910951
+#define PVR_405EZ_RA	0x41511460
 #define PVR_440GP_RB	0x40120440
 #define PVR_440GP_RC	0x40120481
 #define PVR_440EP_RA	0x42221850
diff --git a/include/asm-ppc/u-boot.h b/include/asm-ppc/u-boot.h
index 30b44e3..464f6b5 100644
--- a/include/asm-ppc/u-boot.h
+++ b/include/asm-ppc/u-boot.h
@@ -83,6 +83,7 @@ typedef struct bd_info {
     defined(CONFIG_405GP) || \
     defined(CONFIG_405CR) || \
     defined(CONFIG_405EP) || \
+    defined(CONFIG_405EZ) || \
     defined(CONFIG_440)
 	unsigned char	bi_s_version[4];	/* Version of this structure */
 	unsigned char	bi_r_version[32];	/* Version of the ROM (AMCC) */
@@ -107,7 +108,8 @@ typedef struct bd_info {
 	unsigned char   bi_enet3addr[6];
 #endif
 
-#if defined(CONFIG_405GP) || defined(CONFIG_405EP) || defined (CONFIG_440GX) || \
+#if defined(CONFIG_405GP) || defined(CONFIG_405EP) || \
+    defined(CONFIG_405EZ) || defined(CONFIG_440GX) || \
     defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
     defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
 	unsigned int	bi_opbfreq;		/* OPB clock in Hz */
diff --git a/include/ppc405.h b/include/ppc405.h
index a49912c..08f10d2 100644
--- a/include/ppc405.h
+++ b/include/ppc405.h
@@ -117,6 +117,48 @@
 /*-----------------------------------------------------------------------------+
 |  Universal interrupt controller interrupts
 +-----------------------------------------------------------------------------*/
+#if defined(CONFIG_405EZ)
+#define UIC_DMA0	0x80000000	/* DMA chan. 0			*/
+#define UIC_DMA1	0x40000000	/* DMA chan. 1			*/
+#define UIC_DMA2	0x20000000	/* DMA chan. 2			*/
+#define UIC_DMA3	0x10000000	/* DMA chan. 3			*/
+#define UIC_1588	0x08000000	/* IEEE 1588 network synchronization */
+#define UIC_UART0	0x04000000	/* UART 0			*/
+#define UIC_UART1	0x02000000	/* UART 1			*/
+#define UIC_CAN0	0x01000000	/* CAN 0			*/
+#define UIC_CAN1	0x00800000	/* CAN 1			*/
+#define UIC_SPI		0x00400000	/* SPI				*/
+#define UIC_IIC		0x00200000	/* IIC				*/
+#define UIC_CHT0	0x00100000	/* Chameleon timer high pri interrupt */
+#define UIC_CHT1	0x00080000	/* Chameleon timer high pri interrupt */
+#define UIC_USBH1	0x00040000	/* USB Host 1			*/
+#define UIC_USBH2	0x00020000	/* USB Host 2			*/
+#define UIC_USBDEV	0x00010000	/* USB Device			*/
+#define UIC_ENET	0x00008000	/* Ethernet interrupt status 	*/
+#define UIC_ENET1	0x00008000	/* dummy define              	*/
+#define UIC_EMAC_WAKE	0x00004000	/* EMAC wake up			*/
+
+#define UIC_MADMAL	0x00002000	/* Logical OR of following MadMAL int */
+#define UIC_MAL_SERR 	0x00002000	/*   MAL SERR			*/
+#define UIC_MAL_TXDE	0x00002000	/*   MAL TXDE			*/
+#define UIC_MAL_RXDE	0x00002000	/*   MAL RXDE			*/
+
+#define UIC_MAL_TXEOB	0x00001000	/* MAL TXEOB			*/
+#define UIC_MAL_TXEOB1	0x00000800	/* MAL TXEOB1			*/
+#define UIC_MAL_RXEOB	0x00000400	/* MAL RXEOB			*/
+#define UIC_NAND	0x00000200	/* NAND Flash controller	*/
+#define UIC_ADC		0x00000100	/* ADC				*/
+#define UIC_DAC		0x00000080	/* DAC				*/
+#define UIC_OPB2PLB	0x00000040	/* OPB to PLB bridge interrupt	*/
+#define UIC_RESERVED0	0x00000020	/* Reserved			*/
+#define UIC_EXT0	0x00000010	/* External  interrupt 0	*/
+#define UIC_EXT1	0x00000008	/* External  interrupt 1	*/
+#define UIC_EXT2	0x00000004	/* External  interrupt 2	*/
+#define UIC_EXT3	0x00000002	/* External  interrupt 3	*/
+#define UIC_EXT4	0x00000001	/* External  interrupt 4	*/
+
+#else	/* !defined(CONFIG_405EZ) */
+
 #define UIC_UART0     0x80000000      /* UART 0                             */
 #define UIC_UART1     0x40000000      /* UART 1                             */
 #define UIC_IIC       0x20000000      /* IIC                                */
@@ -144,6 +186,7 @@
 #define UIC_EXT4      0x00000004      /* External  interrupt 4              */
 #define UIC_EXT5      0x00000002      /* External  interrupt 5              */
 #define UIC_EXT6      0x00000001      /* External  interrupt 6              */
+#endif	/* defined(CONFIG_405EZ) */
 
 /******************************************************************************
  * SDRAM Controller
@@ -496,6 +539,325 @@
  */
 #define VCO_MIN     500
 #define VCO_MAX     1000
+#elif defined(CONFIG_405EZ)
+/******************************************************************************
+ * SDR Registers
+ ******************************************************************************/
+#define SDR_DCR_BASE 0x0E
+#define sdrcfga (SDR_DCR_BASE+0x0)	/* ADDR */
+#define sdrcfgd (SDR_DCR_BASE+0x1)	/* Data */
+
+#define mtsdr(reg, data) mtdcr(sdrcfga,reg);mtdcr(sdrcfgd,data)
+#define mfsdr(reg, data) mtdcr(sdrcfga,reg);data = mfdcr(sdrcfgd)
+
+#define sdrnand0	0x4000
+#define sdrultra0	0x4040
+#define sdrultra1	0x4050
+#define sdricintstat	0x4510
+
+#define SDR_NAND0_NDEN		0x80000000
+
+#define SDR_ULTRA0_NDGPIOBP	0x80000000
+#define SDR_ULTRA0_CSN_MASK	0x78000000
+#define SDR_ULTRA0_CSNSEL0	0x40000000
+#define SDR_ULTRA0_CSNSEL1	0x20000000
+#define SDR_ULTRA0_CSNSEL2	0x10000000
+#define SDR_ULTRA0_CSNSEL3	0x08000000
+
+#define SDR_ULTRA1_LEDNENABLE	0x40000000
+
+#define SDR_ICRX_STAT	0x80000000
+#define SDR_ICTX0_STAT	0x40000000
+#define SDR_ICTX1_STAT	0x20000000
+
+/******************************************************************************
+ * Control
+ ******************************************************************************/
+#define CNTRL_DCR_BASE 0x0C
+#define cprcfga (CNTRL_DCR_BASE+0x0)   /* CPR addr reg     */
+#define cprcfgd (CNTRL_DCR_BASE+0x1)   /* CPR data reg     */
+
+/* CPR Registers */
+#define cprclkupd       0x020		/* CPR_CLKUPD */
+#define cprpllc         0x040		/* CPR_PLLC */
+#define cprplld         0x060		/* CPR_PLLD */
+#define cprprimad       0x080		/* CPR_PRIMAD */
+#define cprperd0        0x0e0		/* CPR_PERD0 */
+#define cprperd1        0x0e1		/* CPR_PERD1 */
+#define cprperc0        0x180		/* CPR_PERC0 */
+#define cprmisc0        0x181		/* CPR_MISC0 */
+#define cprmisc1        0x182		/* CPR_MISC1 */
+
+/*
+ * Macro for accessing the indirect CPR register
+ */
+#define mtcpr(reg, data)  mtdcr(cprcfga,reg);mtdcr(cprcfgd,data)
+#define mfcpr(reg, data)  mtdcr(cprcfga,reg);data = mfdcr(cprcfgd)
+
+#define CPR_CLKUPD_ENPLLCH_EN  0x40000000     /* Enable CPR PLL Changes */
+#define CPR_CLKUPD_ENDVCH_EN   0x20000000     /* Enable CPR Sys. Div. Changes */
+#define CPR_PERD0_SPIDV_MASK   0x000F0000     /* SPI Clock Divider */
+
+#define PLLD_FBDV_MASK         0x1F000000     /* PLL feedback divider value */
+#define PLLD_FWDVA_MASK        0x000F0000     /* PLL forward divider A value */
+#define PLLD_FWDVB_MASK        0x00000700     /* PLL forward divider B value */
+
+#define PRIMAD_CPUDV_MASK      0x0F000000     /* CPU Clock Divisor Mask */
+#define PRIMAD_PLBDV_MASK      0x000F0000     /* PLB Clock Divisor Mask */
+#define PRIMAD_OPBDV_MASK      0x00000F00     /* OPB Clock Divisor Mask */
+#define PRIMAD_EBCDV_MASK      0x0000000F     /* EBC Clock Divisor Mask */
+
+#define PERD0_PWMDV_MASK       0xFF000000     /* PWM Divider Mask */
+#define PERD0_SPIDV_MASK       0x000F0000     /* SPI Divider Mask */
+#define PERD0_U0DV_MASK        0x0000FF00     /* UART 0 Divider Mask */
+#define PERD0_U1DV_MASK        0x000000FF     /* UART 1 Divider Mask */
+
+#if 0 /* Deprecated */
+#define CNTRL_DCR_BASE 0x0f0
+#define cpc0_pllmr0   (CNTRL_DCR_BASE+0x0)  /* PLL mode  register 0                */
+#define cpc0_boot     (CNTRL_DCR_BASE+0x1)  /* Clock status register               */
+#define cpc0_epctl    (CNTRL_DCR_BASE+0x3)  /* EMAC to PHY control register        */
+#define cpc0_pllmr1   (CNTRL_DCR_BASE+0x4)  /* PLL mode  register 1                */
+#define cpc0_ucr      (CNTRL_DCR_BASE+0x5)  /* UART control register               */
+#define cpc0_pci      (CNTRL_DCR_BASE+0x9)  /* PCI control register                */
+
+#define CPC0_PLLMR0  (CNTRL_DCR_BASE+0x0)  /* PLL mode 0 register          */
+#define CPC0_BOOT    (CNTRL_DCR_BASE+0x1)  /* Chip Clock Status register   */
+#define CPC0_CR1     (CNTRL_DCR_BASE+0x2)  /* Chip Control 1 register      */
+#define CPC0_EPRCSR  (CNTRL_DCR_BASE+0x3)  /* EMAC PHY Rcv Clk Src register*/
+#define CPC0_PLLMR1  (CNTRL_DCR_BASE+0x4)  /* PLL mode 1 register          */
+#define CPC0_UCR     (CNTRL_DCR_BASE+0x5)  /* UART Control register        */
+#define CPC0_SRR     (CNTRL_DCR_BASE+0x6)  /* Soft Reset register          */
+#define CPC0_JTAGID  (CNTRL_DCR_BASE+0x7)  /* JTAG ID register             */
+#define CPC0_SPARE   (CNTRL_DCR_BASE+0x8)  /* Spare DCR                    */
+#define CPC0_PCI     (CNTRL_DCR_BASE+0x9)  /* PCI Control register         */
+
+/* Bit definitions */
+#define PLLMR0_CPU_DIV_MASK      0x00300000     /* CPU clock divider */
+#define PLLMR0_CPU_DIV_BYPASS    0x00000000
+#define PLLMR0_CPU_DIV_2         0x00100000
+#define PLLMR0_CPU_DIV_3         0x00200000
+#define PLLMR0_CPU_DIV_4         0x00300000
+
+#define PLLMR0_CPU_TO_PLB_MASK   0x00030000     /* CPU:PLB Frequency Divisor */
+#define PLLMR0_CPU_PLB_DIV_1     0x00000000
+#define PLLMR0_CPU_PLB_DIV_2     0x00010000
+#define PLLMR0_CPU_PLB_DIV_3     0x00020000
+#define PLLMR0_CPU_PLB_DIV_4     0x00030000
+
+#define PLLMR0_OPB_TO_PLB_MASK   0x00003000     /* OPB:PLB Frequency Divisor */
+#define PLLMR0_OPB_PLB_DIV_1     0x00000000
+#define PLLMR0_OPB_PLB_DIV_2     0x00001000
+#define PLLMR0_OPB_PLB_DIV_3     0x00002000
+#define PLLMR0_OPB_PLB_DIV_4     0x00003000
+
+#define PLLMR0_EXB_TO_PLB_MASK   0x00000300     /* External Bus:PLB Divisor  */
+#define PLLMR0_EXB_PLB_DIV_2     0x00000000
+#define PLLMR0_EXB_PLB_DIV_3     0x00000100
+#define PLLMR0_EXB_PLB_DIV_4     0x00000200
+#define PLLMR0_EXB_PLB_DIV_5     0x00000300
+
+#define PLLMR0_MAL_TO_PLB_MASK   0x00000030     /* MAL:PLB Divisor  */
+#define PLLMR0_MAL_PLB_DIV_1     0x00000000
+#define PLLMR0_MAL_PLB_DIV_2     0x00000010
+#define PLLMR0_MAL_PLB_DIV_3     0x00000020
+#define PLLMR0_MAL_PLB_DIV_4     0x00000030
+
+#define PLLMR0_PCI_TO_PLB_MASK   0x00000003     /* PCI:PLB Frequency Divisor */
+#define PLLMR0_PCI_PLB_DIV_1     0x00000000
+#define PLLMR0_PCI_PLB_DIV_2     0x00000001
+#define PLLMR0_PCI_PLB_DIV_3     0x00000002
+#define PLLMR0_PCI_PLB_DIV_4     0x00000003
+
+#define PLLMR1_SSCS_MASK         0x80000000     /* Select system clock source */
+#define PLLMR1_PLLR_MASK         0x40000000     /* PLL reset */
+#define PLLMR1_FBMUL_MASK        0x00F00000     /* PLL feedback multiplier value */
+#define PLLMR1_FBMUL_DIV_16      0x00000000
+#define PLLMR1_FBMUL_DIV_1       0x00100000
+#define PLLMR1_FBMUL_DIV_2       0x00200000
+#define PLLMR1_FBMUL_DIV_3       0x00300000
+#define PLLMR1_FBMUL_DIV_4       0x00400000
+#define PLLMR1_FBMUL_DIV_5       0x00500000
+#define PLLMR1_FBMUL_DIV_6       0x00600000
+#define PLLMR1_FBMUL_DIV_7       0x00700000
+#define PLLMR1_FBMUL_DIV_8       0x00800000
+#define PLLMR1_FBMUL_DIV_9       0x00900000
+#define PLLMR1_FBMUL_DIV_10      0x00A00000
+#define PLLMR1_FBMUL_DIV_11      0x00B00000
+#define PLLMR1_FBMUL_DIV_12      0x00C00000
+#define PLLMR1_FBMUL_DIV_13      0x00D00000
+#define PLLMR1_FBMUL_DIV_14      0x00E00000
+#define PLLMR1_FBMUL_DIV_15      0x00F00000
+
+#define PLLMR1_FWDVA_MASK        0x00070000     /* PLL forward divider A value */
+#define PLLMR1_FWDVA_DIV_8       0x00000000
+#define PLLMR1_FWDVA_DIV_7       0x00010000
+#define PLLMR1_FWDVA_DIV_6       0x00020000
+#define PLLMR1_FWDVA_DIV_5       0x00030000
+#define PLLMR1_FWDVA_DIV_4       0x00040000
+#define PLLMR1_FWDVA_DIV_3       0x00050000
+#define PLLMR1_FWDVA_DIV_2       0x00060000
+#define PLLMR1_FWDVA_DIV_1       0x00070000
+#define PLLMR1_FWDVB_MASK        0x00007000     /* PLL forward divider B value */
+#define PLLMR1_TUNING_MASK       0x000003FF     /* PLL tune bits */
+
+/* Defines for CPC0_EPRCSR register */
+#define CPC0_EPRCSR_E0NFE          0x80000000
+#define CPC0_EPRCSR_E1NFE          0x40000000
+#define CPC0_EPRCSR_E1RPP          0x00000080
+#define CPC0_EPRCSR_E0RPP          0x00000040
+#define CPC0_EPRCSR_E1ERP          0x00000020
+#define CPC0_EPRCSR_E0ERP          0x00000010
+#define CPC0_EPRCSR_E1PCI          0x00000002
+#define CPC0_EPRCSR_E0PCI          0x00000001
+
+/* Defines for CPC0_BOOR Register */
+#define CPC0_BOOT_SEP                      0x00000002 /* serial EEPROM present  */
+
+/* Defines for CPC0_PLLMR1 Register fields */
+#define PLL_ACTIVE                 0x80000000
+#define CPC0_PLLMR1_SSCS           0x80000000
+#define PLL_RESET                  0x40000000
+#define CPC0_PLLMR1_PLLR           0x40000000
+    /* Feedback multiplier */
+#define PLL_FBKDIV                 0x00F00000
+#define CPC0_PLLMR1_FBDV           0x00F00000
+#define PLL_FBKDIV_16              0x00000000
+#define PLL_FBKDIV_1               0x00100000
+#define PLL_FBKDIV_2               0x00200000
+#define PLL_FBKDIV_3               0x00300000
+#define PLL_FBKDIV_4               0x00400000
+#define PLL_FBKDIV_5               0x00500000
+#define PLL_FBKDIV_6               0x00600000
+#define PLL_FBKDIV_7               0x00700000
+#define PLL_FBKDIV_8               0x00800000
+#define PLL_FBKDIV_9               0x00900000
+#define PLL_FBKDIV_10              0x00A00000
+#define PLL_FBKDIV_11              0x00B00000
+#define PLL_FBKDIV_12              0x00C00000
+#define PLL_FBKDIV_13              0x00D00000
+#define PLL_FBKDIV_14              0x00E00000
+#define PLL_FBKDIV_15              0x00F00000
+    /* Forward A divisor */
+#define PLL_FWDDIVA                0x00070000
+#define CPC0_PLLMR1_FWDVA          0x00070000
+#define PLL_FWDDIVA_8              0x00000000
+#define PLL_FWDDIVA_7              0x00010000
+#define PLL_FWDDIVA_6              0x00020000
+#define PLL_FWDDIVA_5              0x00030000
+#define PLL_FWDDIVA_4              0x00040000
+#define PLL_FWDDIVA_3              0x00050000
+#define PLL_FWDDIVA_2              0x00060000
+#define PLL_FWDDIVA_1              0x00070000
+    /* Forward B divisor */
+#define PLL_FWDDIVB                0x00007000
+#define CPC0_PLLMR1_FWDVB          0x00007000
+#define PLL_FWDDIVB_8              0x00000000
+#define PLL_FWDDIVB_7              0x00001000
+#define PLL_FWDDIVB_6              0x00002000
+#define PLL_FWDDIVB_5              0x00003000
+#define PLL_FWDDIVB_4              0x00004000
+#define PLL_FWDDIVB_3              0x00005000
+#define PLL_FWDDIVB_2              0x00006000
+#define PLL_FWDDIVB_1              0x00007000
+    /* PLL tune bits */
+#define PLL_TUNE_MASK            0x000003FF
+#define PLL_TUNE_2_M_3           0x00000133     /*  2 <= M <= 3               */
+#define PLL_TUNE_4_M_6           0x00000134     /*  3 <  M <= 6               */
+#define PLL_TUNE_7_M_10          0x00000138     /*  6 <  M <= 10              */
+#define PLL_TUNE_11_M_14         0x0000013C     /* 10 <  M <= 14              */
+#define PLL_TUNE_15_M_40         0x0000023E     /* 14 <  M <= 40              */
+#define PLL_TUNE_VCO_LOW         0x00000000     /* 500MHz <= VCO <=  800MHz   */
+#define PLL_TUNE_VCO_HI          0x00000080     /* 800MHz <  VCO <= 1000MHz   */
+
+/* Defines for CPC0_PLLMR0 Register fields */
+    /* CPU divisor */
+#define PLL_CPUDIV                 0x00300000
+#define CPC0_PLLMR0_CCDV           0x00300000
+#define PLL_CPUDIV_1               0x00000000
+#define PLL_CPUDIV_2               0x00100000
+#define PLL_CPUDIV_3               0x00200000
+#define PLL_CPUDIV_4               0x00300000
+    /* PLB divisor */
+#define PLL_PLBDIV                 0x00030000
+#define CPC0_PLLMR0_CBDV           0x00030000
+#define PLL_PLBDIV_1               0x00000000
+#define PLL_PLBDIV_2               0x00010000
+#define PLL_PLBDIV_3               0x00020000
+#define PLL_PLBDIV_4               0x00030000
+    /* OPB divisor */
+#define PLL_OPBDIV                 0x00003000
+#define CPC0_PLLMR0_OPDV           0x00003000
+#define PLL_OPBDIV_1               0x00000000
+#define PLL_OPBDIV_2               0x00001000
+#define PLL_OPBDIV_3               0x00002000
+#define PLL_OPBDIV_4               0x00003000
+    /* EBC divisor */
+#define PLL_EXTBUSDIV              0x00000300
+#define CPC0_PLLMR0_EPDV           0x00000300
+#define PLL_EXTBUSDIV_2            0x00000000
+#define PLL_EXTBUSDIV_3            0x00000100
+#define PLL_EXTBUSDIV_4            0x00000200
+#define PLL_EXTBUSDIV_5            0x00000300
+    /* MAL divisor */
+#define PLL_MALDIV                 0x00000030
+#define CPC0_PLLMR0_MPDV           0x00000030
+#define PLL_MALDIV_1               0x00000000
+#define PLL_MALDIV_2               0x00000010
+#define PLL_MALDIV_3               0x00000020
+#define PLL_MALDIV_4               0x00000030
+    /* PCI divisor */
+#define PLL_PCIDIV                 0x00000003
+#define CPC0_PLLMR0_PPFD           0x00000003
+#define PLL_PCIDIV_1               0x00000000
+#define PLL_PCIDIV_2               0x00000001
+#define PLL_PCIDIV_3               0x00000002
+#define PLL_PCIDIV_4               0x00000003
+
+/*
+ *-------------------------------------------------------------------------------
+ * PLL settings for 266MHz CPU, 133MHz PLB/SDRAM, 66MHz EBC, 33MHz PCI,
+ * assuming a 33.3MHz input clock to the 405EP.
+ *-------------------------------------------------------------------------------
+ */
+#define PLLMR0_266_133_66  (PLL_CPUDIV_1 | PLL_PLBDIV_2 |  \
+			    PLL_OPBDIV_2 | PLL_EXTBUSDIV_2 |  \
+			    PLL_MALDIV_1 | PLL_PCIDIV_4)
+#define PLLMR1_266_133_66  (PLL_FBKDIV_8  |  \
+			    PLL_FWDDIVA_3 | PLL_FWDDIVB_3 |  \
+			    PLL_TUNE_15_M_40 | PLL_TUNE_VCO_LOW)
+#define PLLMR0_133_66_66_33  (PLL_CPUDIV_1 | PLL_PLBDIV_1 |  \
+			      PLL_OPBDIV_2 | PLL_EXTBUSDIV_4 |  \
+			      PLL_MALDIV_1 | PLL_PCIDIV_4)
+#define PLLMR1_133_66_66_33  (PLL_FBKDIV_4  |  \
+			      PLL_FWDDIVA_6 | PLL_FWDDIVB_6 |  \
+			      PLL_TUNE_15_M_40 | PLL_TUNE_VCO_LOW)
+#define PLLMR0_200_100_50_33 (PLL_CPUDIV_1 | PLL_PLBDIV_2 |  \
+			      PLL_OPBDIV_2 | PLL_EXTBUSDIV_3 |  \
+			      PLL_MALDIV_1 | PLL_PCIDIV_4)
+#define PLLMR1_200_100_50_33 (PLL_FBKDIV_6  |  \
+			      PLL_FWDDIVA_4 | PLL_FWDDIVB_4 |  \
+			      PLL_TUNE_15_M_40 | PLL_TUNE_VCO_LOW)
+#define PLLMR0_266_133_66_33 (PLL_CPUDIV_1 | PLL_PLBDIV_2 |  \
+			      PLL_OPBDIV_2 | PLL_EXTBUSDIV_4 |  \
+			      PLL_MALDIV_1 | PLL_PCIDIV_4)
+#define PLLMR1_266_133_66_33 (PLL_FBKDIV_8  |  \
+			      PLL_FWDDIVA_3 | PLL_FWDDIVB_3 |  \
+			      PLL_TUNE_15_M_40 | PLL_TUNE_VCO_LOW)
+#define PLLMR0_266_66_33_33 (PLL_CPUDIV_1 | PLL_PLBDIV_4 |  \
+			      PLL_OPBDIV_2 | PLL_EXTBUSDIV_2 |  \
+			      PLL_MALDIV_1 | PLL_PCIDIV_2)
+#define PLLMR1_266_66_33_33 (PLL_FBKDIV_8  |  \
+			      PLL_FWDDIVA_3 | PLL_FWDDIVB_3 |  \
+			      PLL_TUNE_15_M_40 | PLL_TUNE_VCO_LOW)
+
+/*
+ * PLL Voltage Controlled Oscillator (VCO) definitions
+ * Maximum and minimum values (in MHz) for correct PLL operation.
+ */
+#define VCO_MIN     500
+#define VCO_MAX     1000
+#endif /* #if 0 */
 #else /* #ifdef CONFIG_405EP */
 /******************************************************************************
  * Control
@@ -578,6 +940,121 @@
 /******************************************************************************
  * Memory Access Layer
  ******************************************************************************/
+#if defined(CONFIG_405EZ)
+#define	MAL_DCR_BASE	0x380
+#define	malmcr		(MAL_DCR_BASE+0x00)	/* MAL Config reg	      */
+#define	malesr		(MAL_DCR_BASE+0x01)	/* Err Status reg (Read/Clear)*/
+#define	malier		(MAL_DCR_BASE+0x02)	/* Interrupt enable reg	      */
+#define	maldbr		(MAL_DCR_BASE+0x03)	/* Mal Debug reg (Read only)  */
+#define	maltxcasr	(MAL_DCR_BASE+0x04)	/* TX Channel active reg (set)*/
+#define	maltxcarr	(MAL_DCR_BASE+0x05)	/* TX Channel active reg (Reset)     */
+#define	maltxeobisr	(MAL_DCR_BASE+0x06)	/* TX End of buffer int status reg   */
+#define	maltxdeir	(MAL_DCR_BASE+0x07)	/* TX Descr. Error Int reg    */
+/*				      0x08-0x0F	   Reserved		      */
+#define	malrxcasr	(MAL_DCR_BASE+0x10)	/* RX Channel active reg (set)*/
+#define	malrxcarr	(MAL_DCR_BASE+0x11)	/* RX Channel active reg (Reset)     */
+#define	malrxeobisr	(MAL_DCR_BASE+0x12)	/* RX End of buffer int status reg   */
+#define	malrxdeir	(MAL_DCR_BASE+0x13)	/* RX Descr. Error Int reg  */
+/*				      0x14-0x1F	   Reserved		    */
+#define	maltxctp0r	(MAL_DCR_BASE+0x20)  /* TX 0 Channel table ptr reg  */
+#define	maltxctp1r	(MAL_DCR_BASE+0x21)  /* TX 1 Channel table ptr reg  */
+#define	maltxctp2r	(MAL_DCR_BASE+0x22)  /* TX 2 Channel table ptr reg  */
+#define	maltxctp3r	(MAL_DCR_BASE+0x23)  /* TX 3 Channel table ptr reg  */
+#define	maltxctp4r	(MAL_DCR_BASE+0x24)  /* TX 4 Channel table ptr reg  */
+#define	maltxctp5r	(MAL_DCR_BASE+0x25)  /* TX 5 Channel table ptr reg  */
+#define	maltxctp6r	(MAL_DCR_BASE+0x26)  /* TX 6 Channel table ptr reg  */
+#define	maltxctp7r	(MAL_DCR_BASE+0x27)  /* TX 7 Channel table ptr reg  */
+#define	maltxctp8r	(MAL_DCR_BASE+0x28)  /* TX 8 Channel table ptr reg  */
+#define	maltxctp9r	(MAL_DCR_BASE+0x29)  /* TX 9 Channel table ptr reg  */
+#define	maltxctp10r	(MAL_DCR_BASE+0x2A)  /* TX 10 Channel table ptr reg */
+#define	maltxctp11r	(MAL_DCR_BASE+0x2B)  /* TX 11 Channel table ptr reg */
+#define	maltxctp12r	(MAL_DCR_BASE+0x2C)  /* TX 12 Channel table ptr reg */
+#define	maltxctp13r	(MAL_DCR_BASE+0x2D)  /* TX 13 Channel table ptr reg */
+#define	maltxctp14r	(MAL_DCR_BASE+0x2E)  /* TX 14 Channel table ptr reg */
+#define	maltxctp15r	(MAL_DCR_BASE+0x2F)  /* TX 15 Channel table ptr reg */
+#define	maltxctp16r	(MAL_DCR_BASE+0x30)  /* TX 16 Channel table ptr reg */
+#define	maltxctp17r	(MAL_DCR_BASE+0x31)  /* TX 17 Channel table ptr reg */
+#define	maltxctp18r	(MAL_DCR_BASE+0x32)  /* TX 18 Channel table ptr reg */
+#define	maltxctp19r	(MAL_DCR_BASE+0x33)  /* TX 19 Channel table ptr reg */
+#define	maltxctp20r	(MAL_DCR_BASE+0x34)  /* TX 20 Channel table ptr reg */
+#define	maltxctp21r	(MAL_DCR_BASE+0x35)  /* TX 21 Channel table ptr reg */
+#define	maltxctp22r	(MAL_DCR_BASE+0x36)  /* TX 22 Channel table ptr reg */
+#define	maltxctp23r	(MAL_DCR_BASE+0x37)  /* TX 23 Channel table ptr reg */
+#define	maltxctp24r	(MAL_DCR_BASE+0x38)  /* TX 24 Channel table ptr reg */
+#define	maltxctp25r	(MAL_DCR_BASE+0x39)  /* TX 25 Channel table ptr reg */
+#define	maltxctp26r	(MAL_DCR_BASE+0x3A)  /* TX 26 Channel table ptr reg */
+#define	maltxctp27r	(MAL_DCR_BASE+0x3B)  /* TX 27 Channel table ptr reg */
+#define	maltxctp28r	(MAL_DCR_BASE+0x3C)  /* TX 28 Channel table ptr reg */
+#define	maltxctp29r	(MAL_DCR_BASE+0x3D)  /* TX 29 Channel table ptr reg */
+#define	maltxctp30r	(MAL_DCR_BASE+0x3E)  /* TX 30 Channel table ptr reg */
+#define	maltxctp31r	(MAL_DCR_BASE+0x3F)  /* TX 31 Channel table ptr reg */
+#define	malrxctp0r	(MAL_DCR_BASE+0x40)  /* RX 0 Channel table ptr reg  */
+#define	malrxctp1r	(MAL_DCR_BASE+0x41)  /* RX 1 Channel table ptr reg  */
+#define	malrxctp2r	(MAL_DCR_BASE+0x42)  /* RX 2 Channel table ptr reg  */
+#define	malrxctp3r	(MAL_DCR_BASE+0x43)  /* RX 3 Channel table ptr reg  */
+#define	malrxctp4r	(MAL_DCR_BASE+0x44)  /* RX 4 Channel table ptr reg  */
+#define	malrxctp5r	(MAL_DCR_BASE+0x45)  /* RX 5 Channel table ptr reg  */
+#define	malrxctp6r	(MAL_DCR_BASE+0x46)  /* RX 6 Channel table ptr reg  */
+#define	malrxctp7r	(MAL_DCR_BASE+0x47)  /* RX 7 Channel table ptr reg  */
+#define	malrxctp8r	(MAL_DCR_BASE+0x48)  /* RX 8 Channel table ptr reg  */
+#define	malrxctp9r	(MAL_DCR_BASE+0x49)  /* RX 9 Channel table ptr reg  */
+#define	malrxctp10r	(MAL_DCR_BASE+0x4A)  /* RX 10 Channel table ptr reg */
+#define	malrxctp11r	(MAL_DCR_BASE+0x4B)  /* RX 11 Channel table ptr reg */
+#define	malrxctp12r	(MAL_DCR_BASE+0x4C)  /* RX 12 Channel table ptr reg */
+#define	malrxctp13r	(MAL_DCR_BASE+0x4D)  /* RX 13 Channel table ptr reg */
+#define	malrxctp14r	(MAL_DCR_BASE+0x4E)  /* RX 14 Channel table ptr reg */
+#define	malrxctp15r	(MAL_DCR_BASE+0x4F)  /* RX 15 Channel table ptr reg */
+#define	malrxctp16r	(MAL_DCR_BASE+0x50)  /* RX 16 Channel table ptr reg */
+#define	malrxctp17r	(MAL_DCR_BASE+0x51)  /* RX 17 Channel table ptr reg */
+#define	malrxctp18r	(MAL_DCR_BASE+0x52)  /* RX 18 Channel table ptr reg */
+#define	malrxctp19r	(MAL_DCR_BASE+0x53)  /* RX 19 Channel table ptr reg */
+#define	malrxctp20r	(MAL_DCR_BASE+0x54)  /* RX 20 Channel table ptr reg */
+#define	malrxctp21r	(MAL_DCR_BASE+0x55)  /* RX 21 Channel table ptr reg */
+#define	malrxctp22r	(MAL_DCR_BASE+0x56)  /* RX 22 Channel table ptr reg */
+#define	malrxctp23r	(MAL_DCR_BASE+0x57)  /* RX 23 Channel table ptr reg */
+#define	malrxctp24r	(MAL_DCR_BASE+0x58)  /* RX 24 Channel table ptr reg */
+#define	malrxctp25r	(MAL_DCR_BASE+0x59)  /* RX 25 Channel table ptr reg */
+#define	malrxctp26r	(MAL_DCR_BASE+0x5A)  /* RX 26 Channel table ptr reg */
+#define	malrxctp27r	(MAL_DCR_BASE+0x5B)  /* RX 27 Channel table ptr reg */
+#define	malrxctp28r	(MAL_DCR_BASE+0x5C)  /* RX 28 Channel table ptr reg */
+#define	malrxctp29r	(MAL_DCR_BASE+0x5D)  /* RX 29 Channel table ptr reg */
+#define	malrxctp30r	(MAL_DCR_BASE+0x5E)  /* RX 30 Channel table ptr reg */
+#define	malrxctp31r	(MAL_DCR_BASE+0x5F)  /* RX 31 Channel table ptr reg */
+#define	malrcbs0	(MAL_DCR_BASE+0x60)  /* RX 0 Channel buffer size reg */
+#define	malrcbs1	(MAL_DCR_BASE+0x61)  /* RX 1 Channel buffer size reg */
+#define	malrcbs2	(MAL_DCR_BASE+0x62)  /* RX 2 Channel buffer size reg */
+#define	malrcbs3	(MAL_DCR_BASE+0x63)  /* RX 3 Channel buffer size reg */
+#define	malrcbs4	(MAL_DCR_BASE+0x64)  /* RX 4 Channel buffer size reg */
+#define	malrcbs5	(MAL_DCR_BASE+0x65)  /* RX 5 Channel buffer size reg */
+#define	malrcbs6	(MAL_DCR_BASE+0x66)  /* RX 6 Channel buffer size reg */
+#define	malrcbs7	(MAL_DCR_BASE+0x67)  /* RX 7 Channel buffer size reg */
+#define	malrcbs8	(MAL_DCR_BASE+0x68)  /* RX 8 Channel buffer size reg */
+#define	malrcbs9	(MAL_DCR_BASE+0x69)  /* RX 9 Channel buffer size reg */
+#define	malrcbs10	(MAL_DCR_BASE+0x6A)  /* RX 10 Channel buffer size reg */
+#define	malrcbs11	(MAL_DCR_BASE+0x6B)  /* RX 11 Channel buffer size reg */
+#define	malrcbs12	(MAL_DCR_BASE+0x6C)  /* RX 12 Channel buffer size reg */
+#define	malrcbs13	(MAL_DCR_BASE+0x6D)  /* RX 13 Channel buffer size reg */
+#define	malrcbs14	(MAL_DCR_BASE+0x6E)  /* RX 14 Channel buffer size reg */
+#define	malrcbs15	(MAL_DCR_BASE+0x6F)  /* RX 15 Channel buffer size reg */
+#define	malrcbs16	(MAL_DCR_BASE+0x70)  /* RX 16 Channel buffer size reg */
+#define	malrcbs17	(MAL_DCR_BASE+0x71)  /* RX 17 Channel buffer size reg */
+#define	malrcbs18	(MAL_DCR_BASE+0x72)  /* RX 18 Channel buffer size reg */
+#define	malrcbs19	(MAL_DCR_BASE+0x73)  /* RX 19 Channel buffer size reg */
+#define	malrcbs20	(MAL_DCR_BASE+0x74)  /* RX 20 Channel buffer size reg */
+#define	malrcbs21	(MAL_DCR_BASE+0x75)  /* RX 21 Channel buffer size reg */
+#define	malrcbs22	(MAL_DCR_BASE+0x76)  /* RX 22 Channel buffer size reg */
+#define	malrcbs23	(MAL_DCR_BASE+0x77)  /* RX 23 Channel buffer size reg */
+#define	malrcbs24	(MAL_DCR_BASE+0x78)  /* RX 24 Channel buffer size reg */
+#define	malrcbs25	(MAL_DCR_BASE+0x79)  /* RX 25 Channel buffer size reg */
+#define	malrcbs26	(MAL_DCR_BASE+0x7A)  /* RX 26 Channel buffer size reg */
+#define	malrcbs27	(MAL_DCR_BASE+0x7B)  /* RX 27 Channel buffer size reg */
+#define	malrcbs28	(MAL_DCR_BASE+0x7C)  /* RX 28 Channel buffer size reg */
+#define	malrcbs29	(MAL_DCR_BASE+0x7D)  /* RX 29 Channel buffer size reg */
+#define	malrcbs30	(MAL_DCR_BASE+0x7E)  /* RX 30 Channel buffer size reg */
+#define	malrcbs31	(MAL_DCR_BASE+0x7F)  /* RX 31 Channel buffer size reg */
+
+#else /* !defined(CONFIG_405EZ) */
+
 #define MAL_DCR_BASE 0x180
 #define malmcr  (MAL_DCR_BASE+0x00)  /* MAL Config reg                       */
 #define malesr  (MAL_DCR_BASE+0x01)  /* Error Status reg (Read/Clear)        */
@@ -598,6 +1075,7 @@
 #define malrxctp1r (MAL_DCR_BASE+0x41)  /* RX 1 Channel table pointer reg    */
 #define malrcbs0   (MAL_DCR_BASE+0x60)  /* RX 0 Channel buffer size reg      */
 #define malrcbs1   (MAL_DCR_BASE+0x61)  /* RX 1 Channel buffer size reg      */
+#endif /* defined(CONFIG_405EZ) */
 
 /*-----------------------------------------------------------------------------
 | IIC Register Offsets
@@ -635,15 +1113,76 @@
 /******************************************************************************
  * On Chip Memory
  ******************************************************************************/
+#if defined(CONFIG_405EZ)
+#define OCM_DCR_BASE 0x020
+#define ocmplb3cr1      (OCM_DCR_BASE+0x00)  /* OCM PLB3 Bank 1 Config Reg    */
+#define ocmplb3cr2      (OCM_DCR_BASE+0x01)  /* OCM PLB3 Bank 2 Config Reg    */
+#define ocmplb3bear     (OCM_DCR_BASE+0x02)  /* OCM PLB3 Bus Error Add Reg    */
+#define ocmplb3besr0    (OCM_DCR_BASE+0x03)  /* OCM PLB3 Bus Error Stat Reg 0 */
+#define ocmplb3besr1    (OCM_DCR_BASE+0x04)  /* OCM PLB3 Bus Error Stat Reg 1 */
+#define ocmcid          (OCM_DCR_BASE+0x05)  /* OCM Core ID                   */
+#define ocmrevid        (OCM_DCR_BASE+0x06)  /* OCM Revision ID               */
+#define ocmplb3dpc      (OCM_DCR_BASE+0x07)  /* OCM PLB3 Data Parity Check    */
+#define ocmdscr1        (OCM_DCR_BASE+0x08)  /* OCM D-side Bank 1 Config Reg  */
+#define ocmdscr2        (OCM_DCR_BASE+0x09)  /* OCM D-side Bank 2 Config Reg  */
+#define ocmiscr1        (OCM_DCR_BASE+0x0A)  /* OCM I-side Bank 1 Config Reg  */
+#define ocmiscr2        (OCM_DCR_BASE+0x0B)  /* OCM I-side Bank 2 Config Reg  */
+#define ocmdsisdpc      (OCM_DCR_BASE+0x0C)  /* OCM D-side/I-side Data Par Chk*/
+#define ocmdsisbear     (OCM_DCR_BASE+0x0D)  /* OCM D-side/I-side Bus Err Addr*/
+#define ocmdsisbesr     (OCM_DCR_BASE+0x0E)  /* OCM D-side/I-side Bus Err Stat*/
+#else
 #define OCM_DCR_BASE 0x018
 #define ocmisarc   (OCM_DCR_BASE+0x00)  /* OCM I-side address compare reg    */
 #define ocmiscntl  (OCM_DCR_BASE+0x01)  /* OCM I-side control reg            */
 #define ocmdsarc   (OCM_DCR_BASE+0x02)  /* OCM D-side address compare reg    */
 #define ocmdscntl  (OCM_DCR_BASE+0x03)  /* OCM D-side control reg            */
+#endif /* CONFIG_405EZ */
 
 /******************************************************************************
  * GPIO macro register defines
  ******************************************************************************/
+#if defined(CONFIG_405EZ)
+/* Only the 405EZ has 2 GPIOs */
+#define GPIO_BASE  0xEF600700
+#define GPIO0_OR		(GPIO_BASE+0x0)
+#define GPIO0_TCR		(GPIO_BASE+0x4)
+#define GPIO0_OSRL		(GPIO_BASE+0x8)
+#define GPIO0_OSRH		(GPIO_BASE+0xC)
+#define GPIO0_TSRL		(GPIO_BASE+0x10)
+#define GPIO0_TSRH		(GPIO_BASE+0x14)
+#define GPIO0_ODR		(GPIO_BASE+0x18)
+#define GPIO0_IR		(GPIO_BASE+0x1C)
+#define GPIO0_RR1		(GPIO_BASE+0x20)
+#define GPIO0_RR2		(GPIO_BASE+0x24)
+#define GPIO0_RR3		(GPIO_BASE+0x28)
+#define GPIO0_ISR1L		(GPIO_BASE+0x30)
+#define GPIO0_ISR1H		(GPIO_BASE+0x34)
+#define GPIO0_ISR2L		(GPIO_BASE+0x38)
+#define GPIO0_ISR2H		(GPIO_BASE+0x3C)
+#define GPIO0_ISR3L		(GPIO_BASE+0x40)
+#define GPIO0_ISR3H		(GPIO_BASE+0x44)
+
+#define GPIO1_BASE  0xEF600800
+#define GPIO1_OR		(GPIO1_BASE+0x0)
+#define GPIO1_TCR		(GPIO1_BASE+0x4)
+#define GPIO1_OSRL		(GPIO1_BASE+0x8)
+#define GPIO1_OSRH		(GPIO1_BASE+0xC)
+#define GPIO1_TSRL		(GPIO1_BASE+0x10)
+#define GPIO1_TSRH		(GPIO1_BASE+0x14)
+#define GPIO1_ODR		(GPIO1_BASE+0x18)
+#define GPIO1_IR		(GPIO1_BASE+0x1C)
+#define GPIO1_RR1		(GPIO1_BASE+0x20)
+#define GPIO1_RR2		(GPIO1_BASE+0x24)
+#define GPIO1_RR3		(GPIO1_BASE+0x28)
+#define GPIO1_ISR1L		(GPIO1_BASE+0x30)
+#define GPIO1_ISR1H		(GPIO1_BASE+0x34)
+#define GPIO1_ISR2L		(GPIO1_BASE+0x38)
+#define GPIO1_ISR2H		(GPIO1_BASE+0x3C)
+#define GPIO1_ISR3L		(GPIO1_BASE+0x40)
+#define GPIO1_ISR3H		(GPIO1_BASE+0x44)
+
+#else	/* !405EZ */
+
 #define GPIO_BASE  0xEF600700
 #define GPIO0_OR               (GPIO_BASE+0x0)
 #define GPIO0_TCR              (GPIO_BASE+0x4)
@@ -660,6 +1199,7 @@
 #define GPIO0_ISR2H            (GPIO_BASE+0x38)
 #define GPIO0_ISR2L            (GPIO_BASE+0x3C)
 
+#endif /* CONFIG_405EZ */
 
 /*
  * Macro for accessing the indirect EBC register
diff --git a/include/ppc4xx_enet.h b/include/ppc4xx_enet.h
index 43c5ca4..3d8ca09 100644
--- a/include/ppc4xx_enet.h
+++ b/include/ppc4xx_enet.h
@@ -130,13 +130,13 @@ typedef struct emac_4xx_hw_st {
 
 
 #if defined(CONFIG_440GX)
-#define EMAC_NUM_DEV	    4
+#define EMAC_NUM_DEV		4
 #elif (defined(CONFIG_440) || defined(CONFIG_405EP)) &&	\
 	defined(CONFIG_NET_MULTI) &&			\
 	!defined(CONFIG_440SP) && !defined(CONFIG_440SPE)
-#define EMAC_NUM_DEV	    2
+#define EMAC_NUM_DEV		2
 #else
-#define EMAC_NUM_DEV	    1
+#define EMAC_NUM_DEV		1
 #endif
 
 #ifdef CONFIG_IBM_EMAC4_V4	/* EMAC4 V4 changed bit setting */
@@ -153,16 +153,16 @@ typedef struct emac_4xx_hw_st {
 /*ZMII Bridge Register addresses */
 #if defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
     defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
-#define ZMII_BASE			(CFG_PERIPHERAL_BASE + 0x0D00)
+#define ZMII_BASE		(CFG_PERIPHERAL_BASE + 0x0D00)
 #else
-#define ZMII_BASE			(CFG_PERIPHERAL_BASE + 0x0780)
+#define ZMII_BASE		(CFG_PERIPHERAL_BASE + 0x0780)
 #endif
-#define ZMII_FER			(ZMII_BASE)
-#define ZMII_SSR			(ZMII_BASE + 4)
-#define ZMII_SMIISR			(ZMII_BASE + 8)
+#define ZMII_FER		(ZMII_BASE)
+#define ZMII_SSR		(ZMII_BASE + 4)
+#define ZMII_SMIISR		(ZMII_BASE + 8)
 
-#define ZMII_RMII			0x22000000
-#define ZMII_MDI0			0x80000000
+#define ZMII_RMII		0x22000000
+#define ZMII_MDI0		0x80000000
 
 /* ZMII FER Register Bit Definitions */
 #define ZMII_FER_DIS		(0x0)
@@ -299,49 +299,41 @@ typedef struct emac_4xx_hw_st {
 #if defined(CONFIG_440)
 #if defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
     defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
-#define EMAC_BASE			    (CFG_PERIPHERAL_BASE + 0x0E00)
+#define EMAC_BASE		(CFG_PERIPHERAL_BASE + 0x0E00)
 #else
-#define EMAC_BASE			    (CFG_PERIPHERAL_BASE + 0x0800)
+#define EMAC_BASE		(CFG_PERIPHERAL_BASE + 0x0800)
 #endif
 #else
-#define EMAC_BASE 			0xEF600800
+#if defined(CONFIG_405EZ)
+#define EMAC_BASE 		0xEF600900
+#else
+#define EMAC_BASE 		0xEF600800
+#endif
 #endif
 
-#define EMAC_M0				    (EMAC_BASE)
-#define EMAC_M1				    (EMAC_BASE + 4)
-#define EMAC_TXM0				(EMAC_BASE + 8)
-#define EMAC_TXM1				(EMAC_BASE + 12)
-#define EMAC_RXM				(EMAC_BASE + 16)
-#define EMAC_ISR				(EMAC_BASE + 20)
-#define EMAC_IER				(EMAC_BASE + 24)
-#define EMAC_IAH				(EMAC_BASE + 28)
-#define EMAC_IAL				(EMAC_BASE + 32)
-#define EMAC_VLAN_TPID_REG		(EMAC_BASE + 36)
-#define EMAC_VLAN_TCI_REG		(EMAC_BASE + 40)
+#define EMAC_M0			(EMAC_BASE)
+#define EMAC_M1			(EMAC_BASE + 4)
+#define EMAC_TXM0		(EMAC_BASE + 8)
+#define EMAC_TXM1		(EMAC_BASE + 12)
+#define EMAC_RXM		(EMAC_BASE + 16)
+#define EMAC_ISR		(EMAC_BASE + 20)
+#define EMAC_IER		(EMAC_BASE + 24)
+#define EMAC_IAH		(EMAC_BASE + 28)
+#define EMAC_IAL		(EMAC_BASE + 32)
 #define EMAC_PAUSE_TIME_REG	(EMAC_BASE + 44)
-#define EMAC_IND_HASH_1			(EMAC_BASE + 48)
-#define EMAC_IND_HASH_2			(EMAC_BASE + 52)
-#define EMAC_IND_HASH_3			(EMAC_BASE + 56)
-#define EMAC_IND_HASH_4			(EMAC_BASE + 60)
-#define EMAC_GRP_HASH_1			(EMAC_BASE + 64)
-#define EMAC_GRP_HASH_2			(EMAC_BASE + 68)
-#define EMAC_GRP_HASH_3			(EMAC_BASE + 72)
-#define EMAC_GRP_HASH_4			(EMAC_BASE + 76)
-#define EMAC_LST_SRC_LOW		(EMAC_BASE + 80)
-#define EMAC_LST_SRC_HI			(EMAC_BASE + 84)
 #define EMAC_I_FRAME_GAP_REG	(EMAC_BASE + 88)
-#define EMAC_STACR			    (EMAC_BASE + 92)
-#define EMAC_TRTR				(EMAC_BASE + 96)
-#define EMAC_RX_HI_LO_WMARK		(EMAC_BASE + 100)
+#define EMAC_STACR		(EMAC_BASE + 92)
+#define EMAC_TRTR		(EMAC_BASE + 96)
+#define EMAC_RX_HI_LO_WMARK	(EMAC_BASE + 100)
 
 /* bit definitions */
 /* MODE REG 0 */
-#define EMAC_M0_RXI			    (0x80000000)
-#define EMAC_M0_TXI			    (0x40000000)
-#define EMAC_M0_SRST			(0x20000000)
-#define EMAC_M0_TXE			    (0x10000000)
-#define EMAC_M0_RXE			    (0x08000000)
-#define EMAC_M0_WKE			    (0x04000000)
+#define EMAC_M0_RXI		(0x80000000)
+#define EMAC_M0_TXI		(0x40000000)
+#define EMAC_M0_SRST		(0x20000000)
+#define EMAC_M0_TXE		(0x10000000)
+#define EMAC_M0_RXE		(0x08000000)
+#define EMAC_M0_WKE		(0x04000000)
 
 /* on 440GX EMAC_MR1 has a different layout! */
 #if defined(CONFIG_440GX) || \
@@ -351,23 +343,23 @@ typedef struct emac_4xx_hw_st {
 #define EMAC_M1_FDE		(0x80000000)
 #define EMAC_M1_ILE		(0x40000000)
 #define EMAC_M1_VLE		(0x20000000)
-#define EMAC_M1_EIFC			(0x10000000)
-#define EMAC_M1_APP			    (0x08000000)
-#define EMAC_M1_RSVD			(0x06000000)
-#define EMAC_M1_IST			    (0x01000000)
-#define EMAC_M1_MF_1000MBPS		(0x00800000)	/* 0's for 10MBPS */
-#define EMAC_M1_MF_100MBPS		(0x00400000)
-#define EMAC_M1_RFS_16K			(0x00280000)	/* ~4k for 512 byte */
-#define EMAC_M1_RFS_8K			(0x00200000)	/* ~4k for 512 byte */
-#define EMAC_M1_RFS_4K			(0x00180000)	/* ~4k for 512 byte */
-#define EMAC_M1_RFS_2K			(0x00100000)
-#define EMAC_M1_RFS_1K			(0x00080000)
-#define EMAC_M1_TX_FIFO_16K		(0x00050000)	/* 0's for 512 byte */
-#define EMAC_M1_TX_FIFO_8K		(0x00040000)
-#define EMAC_M1_TX_FIFO_4K		(0x00030000)
+#define EMAC_M1_EIFC		(0x10000000)
+#define EMAC_M1_APP		(0x08000000)
+#define EMAC_M1_RSVD		(0x06000000)
+#define EMAC_M1_IST		(0x01000000)
+#define EMAC_M1_MF_1000MBPS	(0x00800000)	/* 0's for 10MBPS */
+#define EMAC_M1_MF_100MBPS	(0x00400000)
+#define EMAC_M1_RFS_16K		(0x00280000)	/* ~4k for 512 byte */
+#define EMAC_M1_RFS_8K		(0x00200000)	/* ~4k for 512 byte */
+#define EMAC_M1_RFS_4K		(0x00180000)	/* ~4k for 512 byte */
+#define EMAC_M1_RFS_2K		(0x00100000)
+#define EMAC_M1_RFS_1K		(0x00080000)
+#define EMAC_M1_TX_FIFO_16K	(0x00050000)	/* 0's for 512 byte */
+#define EMAC_M1_TX_FIFO_8K	(0x00040000)
+#define EMAC_M1_TX_FIFO_4K	(0x00030000)
 #define EMAC_M1_TX_FIFO_2K	(0x00020000)
-#define EMAC_M1_TX_FIFO_1K		(0x00010000)
-#define EMAC_M1_TR_MULTI		(0x00008000)	/* 0'x for single packet */
+#define EMAC_M1_TX_FIFO_1K	(0x00010000)
+#define EMAC_M1_TR_MULTI	(0x00008000)	/* 0'x for single packet */
 #define EMAC_M1_MWSW		(0x00007000)
 #define EMAC_M1_JUMBO_ENABLE	(0x00000800)
 #define EMAC_M1_IPPA		(0x000007c0)
@@ -378,34 +370,34 @@ typedef struct emac_4xx_hw_st {
 #define EMAC_M1_RSVD1		(0x00000007)
 #else /* defined(CONFIG_440GX) */
 /* EMAC_MR1 is the same on 405GP, 405GPr, 405EP, 440GP, 440EP */
-#define EMAC_M1_FDE			0x80000000
-#define EMAC_M1_ILE			0x40000000
-#define EMAC_M1_VLE			0x20000000
-#define EMAC_M1_EIFC			0x10000000
-#define EMAC_M1_APP			0x08000000
-#define EMAC_M1_AEMI			0x02000000
-#define EMAC_M1_IST			0x01000000
-#define EMAC_M1_MF_1000MBPS		0x00800000	/* 0's for 10MBPS */
-#define EMAC_M1_MF_100MBPS		0x00400000
-#define EMAC_M1_RFS_4K			0x00300000	/* ~4k for 512 byte */
-#define EMAC_M1_RFS_2K			0x00200000
-#define EMAC_M1_RFS_1K			0x00100000
-#define EMAC_M1_TX_FIFO_2K		0x00080000	/* 0's for 512 byte */
-#define EMAC_M1_TX_FIFO_1K		0x00040000
-#define EMAC_M1_TR0_DEPEND		0x00010000	/* 0'x for single packet */
-#define EMAC_M1_TR0_MULTI		0x00008000
-#define EMAC_M1_TR1_DEPEND		0x00004000
-#define EMAC_M1_TR1_MULTI		0x00002000
+#define EMAC_M1_FDE		0x80000000
+#define EMAC_M1_ILE		0x40000000
+#define EMAC_M1_VLE		0x20000000
+#define EMAC_M1_EIFC		0x10000000
+#define EMAC_M1_APP		0x08000000
+#define EMAC_M1_AEMI		0x02000000
+#define EMAC_M1_IST		0x01000000
+#define EMAC_M1_MF_1000MBPS	0x00800000	/* 0's for 10MBPS */
+#define EMAC_M1_MF_100MBPS	0x00400000
+#define EMAC_M1_RFS_4K		0x00300000	/* ~4k for 512 byte */
+#define EMAC_M1_RFS_2K		0x00200000
+#define EMAC_M1_RFS_1K		0x00100000
+#define EMAC_M1_TX_FIFO_2K	0x00080000	/* 0's for 512 byte */
+#define EMAC_M1_TX_FIFO_1K	0x00040000
+#define EMAC_M1_TR0_DEPEND	0x00010000	/* 0'x for single packet */
+#define EMAC_M1_TR0_MULTI	0x00008000
+#define EMAC_M1_TR1_DEPEND	0x00004000
+#define EMAC_M1_TR1_MULTI	0x00002000
 #if defined(CONFIG_440EP) || defined(CONFIG_440GR)
-#define EMAC_M1_JUMBO_ENABLE		0x00001000
+#define EMAC_M1_JUMBO_ENABLE	0x00001000
 #endif /* defined(CONFIG_440EP) || defined(CONFIG_440GR) */
 #endif /* defined(CONFIG_440GX) */
 
 /* Transmit Mode Register 0 */
-#define EMAC_TXM0_GNP0			(0x80000000)
-#define EMAC_TXM0_GNP1			(0x40000000)
-#define EMAC_TXM0_GNPD			(0x20000000)
-#define EMAC_TXM0_FC			(0x10000000)
+#define EMAC_TXM0_GNP0		(0x80000000)
+#define EMAC_TXM0_GNP1		(0x40000000)
+#define EMAC_TXM0_GNPD		(0x20000000)
+#define EMAC_TXM0_FC		(0x10000000)
 
 /* Receive Mode Register */
 #define EMAC_RMR_SP		(0x80000000)
@@ -427,39 +419,38 @@ typedef struct emac_4xx_hw_st {
 #define EMAC_ISR_PP		(0x01000000)
 #define EMAC_ISR_BP		(0x00800000)
 #define EMAC_ISR_RP		(0x00400000)
-#define EMAC_ISR_SE			(0x00200000)
-#define EMAC_ISR_SYE			(0x00100000)
-#define EMAC_ISR_BFCS			(0x00080000)
-#define EMAC_ISR_PTLE			(0x00040000)
-#define EMAC_ISR_ORE			(0x00020000)
-#define EMAC_ISR_IRE			(0x00010000)
-#define EMAC_ISR_DBDM			(0x00000200)
-#define EMAC_ISR_DB0			(0x00000100)
-#define EMAC_ISR_SE0			(0x00000080)
-#define EMAC_ISR_TE0			(0x00000040)
-#define EMAC_ISR_DB1			(0x00000020)
-#define EMAC_ISR_SE1			(0x00000010)
-#define EMAC_ISR_TE1			(0x00000008)
-#define EMAC_ISR_MOS			(0x00000002)
-#define EMAC_ISR_MOF			(0x00000001)
-
+#define EMAC_ISR_SE		(0x00200000)
+#define EMAC_ISR_SYE		(0x00100000)
+#define EMAC_ISR_BFCS		(0x00080000)
+#define EMAC_ISR_PTLE		(0x00040000)
+#define EMAC_ISR_ORE		(0x00020000)
+#define EMAC_ISR_IRE		(0x00010000)
+#define EMAC_ISR_DBDM		(0x00000200)
+#define EMAC_ISR_DB0		(0x00000100)
+#define EMAC_ISR_SE0		(0x00000080)
+#define EMAC_ISR_TE0		(0x00000040)
+#define EMAC_ISR_DB1		(0x00000020)
+#define EMAC_ISR_SE1		(0x00000010)
+#define EMAC_ISR_TE1		(0x00000008)
+#define EMAC_ISR_MOS		(0x00000002)
+#define EMAC_ISR_MOF		(0x00000001)
 
 /* STA CONTROL REG */
-#define EMAC_STACR_OC			(0x00008000)
-#define EMAC_STACR_PHYE			(0x00004000)
+#define EMAC_STACR_OC		(0x00008000)
+#define EMAC_STACR_PHYE		(0x00004000)
 
 #ifdef CONFIG_IBM_EMAC4_V4	/* EMAC4 V4 changed bit setting */
-#define EMAC_STACR_INDIRECT_MODE	(0x00002000)
-#define EMAC_STACR_WRITE		(0x00000800) /* $BUC */
-#define EMAC_STACR_READ			(0x00001000) /* $BUC */
-#define EMAC_STACR_OP_MASK		(0x00001800)
-#define EMAC_STACR_MDIO_ADDR		(0x00000000)
-#define EMAC_STACR_MDIO_WRITE		(0x00000800)
-#define EMAC_STACR_MDIO_READ		(0x00001800)
-#define EMAC_STACR_MDIO_READ_INC	(0x00001000)
+#define EMAC_STACR_INDIRECT_MODE (0x00002000)
+#define EMAC_STACR_WRITE	(0x00000800) /* $BUC */
+#define EMAC_STACR_READ		(0x00001000) /* $BUC */
+#define EMAC_STACR_OP_MASK	(0x00001800)
+#define EMAC_STACR_MDIO_ADDR	(0x00000000)
+#define EMAC_STACR_MDIO_WRITE	(0x00000800)
+#define EMAC_STACR_MDIO_READ	(0x00001800)
+#define EMAC_STACR_MDIO_READ_INC (0x00001000)
 #else
-#define EMAC_STACR_WRITE		(0x00002000)
-#define EMAC_STACR_READ			(0x00001000)
+#define EMAC_STACR_WRITE	(0x00002000)
+#define EMAC_STACR_READ		(0x00001000)
 #endif
 
 #define EMAC_STACR_CLK_83MHZ	(0x00000800)  /* 0's for 50Mhz */
@@ -467,9 +458,9 @@ typedef struct emac_4xx_hw_st {
 #define EMAC_STACR_CLK_100MHZ	(0x00000C00)
 
 /* Transmit Request Threshold Register */
-#define EMAC_TRTR_256			(0x18000000)   /* 0's for 64 Bytes */
-#define EMAC_TRTR_192			(0x10000000)
-#define EMAC_TRTR_128			(0x01000000)
+#define EMAC_TRTR_256		(0x18000000)   /* 0's for 64 Bytes */
+#define EMAC_TRTR_192		(0x10000000)
+#define EMAC_TRTR_128		(0x01000000)
 
 /* the follwing defines are for the MadMAL status and control registers. */
 /* For bits 0..5 look at the mal.h file					 */