Add support for EDB93xx boards

Added support for the following EDB93xx boards:

EDB9301
EDB9302
EDB9302A
EDB9307
EDB9307A
EDB93012
EDB9315
EDB9315A

Signed-off-by: Matthias Kaehlcke <matthias@kaehlcke.net>

13 files changed, 954 insertions, 0 deletions

diff --git a/MAINTAINERS b/MAINTAINERS
index 0c2b1b1..1721ecb 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -599,6 +599,16 @@ Gary Jennejohn <garyj@denx.de>
 	smdk2400	ARM920T
 	trab		ARM920T
 
+Matthias Kaehlcke <matthias@kaehlcke.net>
+	edb9301			ARM920T (EP9301)
+	edb9302			ARM920T (EP9302)
+	edb9302a		ARM920T (EP9302)
+	edb9307			ARM920T (EP9307)
+	edb9307a		ARM920T (EP9307)
+	edb9312			ARM920T (EP9312)
+	edb9315			ARM920T (EP9315)
+	edb9315a		ARM920T (EP9315)
+
 Konstantin Kletschke <kletschke@synertronixx.de>
 	scb9328		ARM920T
 
diff --git a/MAKEALL b/MAKEALL
index 506dc78..549cc56 100755
--- a/MAKEALL
+++ b/MAKEALL
@@ -555,6 +555,14 @@ LIST_ARM9="			\
 	cp946es			\
 	cp966			\
 	da830evm		\
+	edb9301			\
+	edb9302			\
+	edb9302a		\
+	edb9307			\
+	edb9307a		\
+	edb9312			\
+	edb9315			\
+	edb9315a		\
 	imx27lite		\
 	lpd7a400		\
 	mv88f6281gtw_ge		\
diff --git a/Makefile b/Makefile
index 628bcdb..327aa8c 100644
--- a/Makefile
+++ b/Makefile
@@ -2416,6 +2416,16 @@ caddy2_config \
 vme8349_config:		unconfig
 	@$(MKCONFIG) -t $(@:_config=) vme8349 ppc mpc83xx vme8349 esd
 
+edb9301_config \
+edb9302_config \
+edb9302a_config \
+edb9307_config \
+edb9307a_config \
+edb9312_config \
+edb9315_config \
+edb9315a_config: unconfig
+	@$(MKCONFIG) -t $(@:_config=) edb93xx arm arm920t edb93xx NULL ep93xx
+
 #########################################################################
 ## MPC85xx Systems
 #########################################################################
diff --git a/board/edb93xx/Makefile b/board/edb93xx/Makefile
new file mode 100644
index 0000000..e2e2636
--- /dev/null
+++ b/board/edb93xx/Makefile
@@ -0,0 +1,50 @@
+#
+# (C) Copyright 2003-2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= $(obj)lib$(BOARD).a
+
+COBJS	:= edb93xx.o flash_cfg.o pll_cfg.o sdram_cfg.o
+
+SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS	:= $(addprefix $(obj),$(COBJS))
+SOBJS	:= $(addprefix $(obj),$(SOBJS))
+
+$(LIB):	$(obj).depend $(OBJS) $(SOBJS)
+	$(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+
+clean:
+	rm -f $(SOBJS) $(OBJS)
+
+distclean:	clean
+	rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/edb93xx/config.mk b/board/edb93xx/config.mk
new file mode 100644
index 0000000..b2fc6fa
--- /dev/null
+++ b/board/edb93xx/config.mk
@@ -0,0 +1,33 @@
+LDSCRIPT := $(SRCTREE)/cpu/arm920t/ep93xx/u-boot.lds
+
+ifdef CONFIG_EDB9301
+TEXT_BASE = 0x05700000
+endif
+
+ifdef CONFIG_EDB9302
+TEXT_BASE = 0x05700000
+endif
+
+ifdef CONFIG_EDB9302A
+TEXT_BASE = 0xc5700000
+endif
+
+ifdef CONFIG_EDB9307
+TEXT_BASE = 0x01f00000
+endif
+
+ifdef CONFIG_EDB9307A
+TEXT_BASE = 0xc1f00000
+endif
+
+ifdef CONFIG_EDB9312
+TEXT_BASE = 0x01f00000
+endif
+
+ifdef CONFIG_EDB9315
+TEXT_BASE = 0x01f00000
+endif
+
+ifdef CONFIG_EDB9315A
+TEXT_BASE = 0xc1f00000
+endif
diff --git a/board/edb93xx/early_udelay.h b/board/edb93xx/early_udelay.h
new file mode 100644
index 0000000..3b26b3f
--- /dev/null
+++ b/board/edb93xx/early_udelay.h
@@ -0,0 +1,34 @@
+/*
+ * Copyright (C) 2009 Matthias Kaehlcke <matthias@kaehlcke.net>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+/* delay execution before timers are initialized */
+static inline void early_udelay(uint32_t usecs)
+{
+	/* loop takes 4 cycles at 5.0ns (fastest case, running at 200MHz) */
+	register uint32_t loops = (usecs * 1000) / 20;
+
+	__asm__ volatile ("1:\n"
+			"subs %0, %1, #1\n"
+			"bne 1b":"=r" (loops):"0" (loops));
+}
diff --git a/board/edb93xx/edb93xx.c b/board/edb93xx/edb93xx.c
new file mode 100644
index 0000000..4df2246
--- /dev/null
+++ b/board/edb93xx/edb93xx.c
@@ -0,0 +1,104 @@
+/*
+ * Copyright (C) 2009 Matthias Kaehlcke <matthias@kaehlcke.net>
+ *
+ * (C) Copyright 2002 2003
+ * Network Audio Technologies, Inc. <www.netaudiotech.com>
+ * Adam Bezanson <bezanson@netaudiotech.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <netdev.h>
+#include <asm/arch/ep93xx.h>
+#include <asm/io.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#define MAX_BANK_SIZE	0x04000000 /* 64 MB */
+
+static ulong const bank_addr[CONFIG_NR_DRAM_BANKS] = {
+	PHYS_SDRAM_1,
+#ifdef PHYS_SDRAM_2
+	PHYS_SDRAM_2,
+#endif
+#ifdef PHYS_SDRAM_3
+	PHYS_SDRAM_3,
+#endif
+#ifdef PHYS_SDRAM_4
+	PHYS_SDRAM_4
+#endif
+};
+
+int board_init(void)
+{
+	struct syscon_regs *syscon = (struct syscon_regs *)SYSCON_BASE;
+
+	icache_enable();
+
+#ifdef USE_920T_MMU
+	dcache_enable();
+#endif
+
+	/*
+	 * set UARTBAUD bit to drive UARTs with 14.7456MHz instead of
+	 * 14.7456/2 MHz
+	 */
+	uint32_t value = readl(&syscon->pwrcnt);
+	value |= SYSCON_PWRCNT_UART_BAUD;
+	writel(value, &syscon->pwrcnt);
+
+	/* Machine number, as defined in linux/arch/arm/tools/mach-types */
+	gd->bd->bi_arch_number = CONFIG_MACH_TYPE;
+
+	/* adress of boot parameters */
+	gd->bd->bi_boot_params = LINUX_BOOT_PARAM_ADDR;
+
+	/* We have a console */
+	gd->have_console = 1;
+
+	return 0;
+}
+
+int board_eth_init(bd_t *bd)
+{
+	return ep93xx_eth_initialize(0, MAC_BASE);
+}
+
+int dram_init(void)
+{
+	unsigned int *src, *dst;
+	int i;
+
+	for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) {
+		const ulong bank_size = get_ram_size((long *)bank_addr[i],
+						MAX_BANK_SIZE);
+		if (bank_size) {
+			gd->bd->bi_dram[i].start = bank_addr[i];
+			gd->bd->bi_dram[i].size = bank_size;
+		}
+	}
+
+	/* copy exception vectors */
+	src = (unsigned int *)_armboot_start;
+	dst = (unsigned int *)PHYS_SDRAM_1;
+	memcpy(dst, src, 16 * sizeof(unsigned int));
+
+	return 0;
+}
diff --git a/board/edb93xx/flash_cfg.c b/board/edb93xx/flash_cfg.c
new file mode 100644
index 0000000..a4c2048
--- /dev/null
+++ b/board/edb93xx/flash_cfg.c
@@ -0,0 +1,38 @@
+/*
+ * Flash setup for Cirrus edb93xx boards
+ *
+ * Copyright (C) 2009 Matthias Kaehlcke <matthias@kaehlcke.net>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/arch/ep93xx.h>
+#include <asm/io.h>
+
+#define SMC_BCR6_VALUE	(2 << SMC_BCR_IDCY_SHIFT | 5 << SMC_BCR_WST1_SHIFT |	\
+				SMC_BCR_BLE | 2 << SMC_BCR_WST2_SHIFT |		\
+				1 << SMC_BCR_MW_SHIFT)
+
+void flash_cfg(void)
+{
+	struct smc_regs *smc = (struct smc_regs *)SMC_BASE;
+
+	writel(SMC_BCR6_VALUE, &smc->bcr6);
+}
diff --git a/board/edb93xx/pll_cfg.c b/board/edb93xx/pll_cfg.c
new file mode 100644
index 0000000..a687af0
--- /dev/null
+++ b/board/edb93xx/pll_cfg.c
@@ -0,0 +1,58 @@
+/*
+ * PLL setup for Cirrus edb93xx boards
+ *
+ * Copyright (C) 2009 Matthias Kaehlcke <matthias@kaehlcke.net>
+ *
+ * Copyright (C) 2006 Dominic Rath <Dominic.Rath@gmx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include "pll_cfg.h"
+#include "early_udelay.h"
+
+void pll_cfg(void)
+{
+	struct syscon_regs *syscon = (struct syscon_regs *)SYSCON_BASE;
+
+	/* setup PLL1 */
+	writel(CLKSET1_VAL, &syscon->clkset1);
+
+	/*
+	 * flush the pipeline
+	 * writing to CLKSET1 causes the EP93xx to enter standby for between
+	 * 8 ms to 16 ms, until PLL1 stabilizes
+	 */
+	asm("nop");
+	asm("nop");
+	asm("nop");
+	asm("nop");
+	asm("nop");
+
+	/* setup PLL2 */
+	writel(CLKSET2_VAL, &syscon->clkset2);
+
+	/*
+	 * the user's guide recommends to wait at least 1 ms for PLL2 to
+	 * stabilize
+	 */
+	early_udelay(1000);
+}
diff --git a/board/edb93xx/pll_cfg.h b/board/edb93xx/pll_cfg.h
new file mode 100644
index 0000000..0b6f469
--- /dev/null
+++ b/board/edb93xx/pll_cfg.h
@@ -0,0 +1,72 @@
+/*
+ * PLL register values for Cirrus edb93xx boards
+ *
+ * Copyright (C) 2009 Matthias Kaehlcke <matthias@kaehlcke.net>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+#include <asm/arch/ep93xx.h>
+
+#if defined(CONFIG_EDB9301) || defined(CONFIG_EDB9302) ||	\
+	defined(CONFIG_EDB9302A)
+/*
+ * fclk_div: 2, nbyp1: 1, hclk_div: 5, pclk_div: 2
+ * pll1_x1: 294912000.000000, pll1_x2ip: 36864000.000000,
+ * pll1_x2: 331776000.000000, pll1_out: 331776000.000000
+ */
+#define CLKSET1_VAL	(7 << SYSCON_CLKSET_PLL_X2IPD_SHIFT |	\
+			8 << SYSCON_CLKSET_PLL_X2FBD2_SHIFT |	\
+			19 << SYSCON_CLKSET_PLL_X1FBD1_SHIFT |	\
+			1 << SYSCON_CLKSET1_PCLK_DIV_SHIFT |	\
+			3 << SYSCON_CLKSET1_HCLK_DIV_SHIFT |	\
+			SYSCON_CLKSET1_NBYP1 |			\
+			1 << SYSCON_CLKSET1_FCLK_DIV_SHIFT)
+#elif defined(CONFIG_EDB9307) || defined(CONFIG_EDB9307A) ||	\
+	defined CONFIG_EDB9312 || defined(CONFIG_EDB9315) ||	\
+	defined(CONFIG_EDB9315A)
+/*
+ * fclk_div: 2, nbyp1: 1, hclk_div: 4, pclk_div: 2
+ * pll1_x1: 3096576000.000000, pll1_x2ip: 129024000.000000,
+ * pll1_x2: 3999744000.000000, pll1_out: 1999872000.000000
+ */
+#define CLKSET1_VAL	(23 << SYSCON_CLKSET_PLL_X2IPD_SHIFT |	\
+			30 << SYSCON_CLKSET_PLL_X2FBD2_SHIFT |	\
+			20 << SYSCON_CLKSET_PLL_X1FBD1_SHIFT |	\
+			1 << SYSCON_CLKSET1_PCLK_DIV_SHIFT |	\
+			2 << SYSCON_CLKSET1_HCLK_DIV_SHIFT |	\
+			SYSCON_CLKSET1_NBYP1 |			\
+			1 << SYSCON_CLKSET1_FCLK_DIV_SHIFT)
+#else
+#error "Undefined board"
+#endif
+
+/*
+ * usb_div: 4, nbyp2: 1, pll2_en: 1
+ * pll2_x1: 368640000.000000, pll2_x2ip: 15360000.000000,
+ * pll2_x2: 384000000.000000, pll2_out: 192000000.000000
+ */
+#define CLKSET2_VAL	(23 << SYSCON_CLKSET_PLL_X2IPD_SHIFT |	\
+			24 << SYSCON_CLKSET_PLL_X2FBD2_SHIFT |	\
+			24 << SYSCON_CLKSET_PLL_X1FBD1_SHIFT |	\
+			1 << SYSCON_CLKSET_PLL_PS_SHIFT |	\
+			SYSCON_CLKSET2_PLL2_EN |		\
+			SYSCON_CLKSET2_NBYP2 |			\
+			3 << SYSCON_CLKSET2_USB_DIV_SHIFT)
diff --git a/board/edb93xx/sdram_cfg.c b/board/edb93xx/sdram_cfg.c
new file mode 100644
index 0000000..6155f0e
--- /dev/null
+++ b/board/edb93xx/sdram_cfg.c
@@ -0,0 +1,123 @@
+/*
+ * Copyright (C) 2009 Matthias Kaehlcke <matthias@kaehlcke.net>
+ *
+ * Copyright (C) 2006 Dominic Rath <Dominic.Rath@gmx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <asm/io.h>
+#include "sdram_cfg.h"
+#include "early_udelay.h"
+
+#define PROGRAM_MODE_REG(bank)		(*(volatile uint32_t *)		\
+		(SDRAM_BASE_ADDR | SDRAM_BANK_SEL_##bank | SDRAM_MODE_REG_VAL))
+
+#define PRECHARGE_BANK(bank)		(*(volatile uint32_t *)		\
+				(SDRAM_BASE_ADDR | SDRAM_BANK_SEL_##bank))
+
+static void force_precharge(void);
+static void setup_refresh_timer(void);
+static void program_mode_registers(void);
+
+void sdram_cfg(void)
+{
+	struct sdram_regs *sdram = (struct sdram_regs *)SDRAM_BASE;
+
+	writel(SDRAM_DEVCFG_VAL, &sdram->SDRAM_DEVCFG_REG);
+
+	/* Issue continous NOP commands */
+	writel(GLCONFIG_INIT | GLCONFIG_MRS | GLCONFIG_CKE, &sdram->glconfig);
+
+	early_udelay(200);
+
+	force_precharge();
+
+	setup_refresh_timer();
+
+	program_mode_registers();
+
+	/* Select normal operation mode */
+	writel(GLCONFIG_CKE, &sdram->glconfig);
+}
+
+static void force_precharge(void)
+{
+	/*
+	 * Errata most EP93xx revisions say that PRECHARGE ALL isn't always
+	 * issued.
+	 *
+	 * Do a read from each bank to make sure they're precharged
+	 */
+
+	PRECHARGE_BANK(0);
+	PRECHARGE_BANK(1);
+	PRECHARGE_BANK(2);
+	PRECHARGE_BANK(3);
+}
+
+static void setup_refresh_timer(void)
+{
+	struct sdram_regs *sdram = (struct sdram_regs *)SDRAM_BASE;
+
+	/* Load refresh timer with 10 to issue refresh every 10 cycles */
+	writel(0x0a, &sdram->refrshtimr);
+
+	/*
+	 * Wait at least 80 clock cycles to provide 8 refresh cycles
+	 * to all SDRAMs
+	 */
+	early_udelay(1);
+
+	/*
+	 * Program refresh timer with normal value
+	 * We need 8192 refresh cycles every 64ms
+	 * at 15ns (HCLK >= 66MHz) per cycle:
+	 * 64ms / 8192 = 7.8125us
+	 * 7.8125us / 15ns = 520 (0x208)
+	 */
+	/*
+	 * TODO: redboot uses 0x1e0 for the slowest possible device
+	 * but i don't understand how this value is calculated
+	 */
+	writel(0x208, &sdram->refrshtimr);
+}
+
+static void program_mode_registers(void)
+{
+	/*
+	 * The mode registers are programmed by performing a read from each
+	 * SDRAM bank. The value of the address that is read defines the value
+	 * that is written into the mode register
+	 */
+
+	PROGRAM_MODE_REG(0);
+
+#if (CONFIG_NR_DRAM_BANKS >= 2)
+	PROGRAM_MODE_REG(1);
+#endif
+
+#if (CONFIG_NR_DRAM_BANKS >= 3)
+	PROGRAM_MODE_REG(2);
+#endif
+
+#if (CONFIG_NR_DRAM_BANKS == 4)
+	PROGRAM_MODE_REG(3);
+#endif
+}
diff --git a/board/edb93xx/sdram_cfg.h b/board/edb93xx/sdram_cfg.h
new file mode 100644
index 0000000..757b63c
--- /dev/null
+++ b/board/edb93xx/sdram_cfg.h
@@ -0,0 +1,144 @@
+/*
+ * Copyright (C) 2009 Matthias Kaehlcke <matthias@kaehlcke.net>
+ *
+ * Copyright (C) 2006 Dominic Rath <Dominic.Rath@gmx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+#include <asm/arch/ep93xx.h>
+
+#define SDRAM_BASE_ADDR		PHYS_SDRAM_1
+
+#ifdef CONFIG_EDB93XX_SDCS0
+#define SDRAM_DEVCFG_REG	devcfg0
+#elif defined(CONFIG_EDB93XX_SDCS3)
+#define SDRAM_DEVCFG_REG	devcfg3
+#else
+#error "SDRAM bank configuration"
+#endif
+
+#if defined(CONFIG_EDB9301) || defined(CONFIG_EDB9302) ||	\
+	defined(CONFIG_EDB9302A)
+/*
+ * 1x Samsung K4S561632C-TC/L75 4M x 16bit x 4 banks SDRAM
+ *
+ * CLK cycle time min:
+ *	@ CAS latency = 3: 7.5ns
+ *	@ CAS latency = 2: 10ns
+ * We're running at 66MHz (15ns cycle time) external bus speed (HCLK),
+ * so it's safe to use CAS latency = 2
+ *
+ * RAS-to-CAS delay min:
+ *	20ns
+ * At 15ns cycle time, we use RAS-to-CAS delay = 2
+ *
+ * SROMLL = 1: Swap BA[1:0] with A[13:12], making the SDRAM appear
+ * as four blocks of 8MB size, instead of eight blocks of 4MB size:
+ *
+ * EDB9301/EDB9302:
+ *
+ * 0x00000000 - 0x007fffff
+ * 0x01000000 - 0x017fffff
+ * 0x04000000 - 0x047fffff
+ * 0x05000000 - 0x057fffff
+ *
+ *
+ * EDB9302a:
+ *
+ * 0xc0000000 - 0xc07fffff
+ * 0xc1000000 - 0xc17fffff
+ * 0xc4000000 - 0xc47fffff
+ * 0xc5000000 - 0xc57fffff
+ *
+ * BANKCOUNT = 1: This is a device with four banks
+ */
+
+#define SDRAM_DEVCFG_VAL (SDRAM_DEVCFG_BANKCOUNT |			\
+				SDRAM_DEVCFG_SROMLL |			\
+				SDRAM_DEVCFG_CASLAT_2 |			\
+				SDRAM_DEVCFG_RASTOCAS_2 |		\
+				SDRAM_DEVCFG_EXTBUSWIDTH)
+
+/*
+ * 16 bit ext. bus
+ *
+ * A[22:09] is output as SYA[13:0]
+ * CAS latency: 2
+ * Burst type: sequential
+ * Burst length: 8 (required for 16 bit ext. bus)
+ * SYA[13:0] = 0x0023
+ */
+#define SDRAM_MODE_REG_VAL	0x4600
+
+#define SDRAM_BANK_SEL_0	0x00000000 /* A[22:21] = b00 */
+#define SDRAM_BANK_SEL_1	0x00200000 /* A[22:21] = b01 */
+#define SDRAM_BANK_SEL_2	0x00400000 /* A[22:21] = b10 */
+#define SDRAM_BANK_SEL_3	0x00600000 /* A[22:21] = b11 */
+
+#elif defined(CONFIG_EDB9307) || defined(CONFIG_EDB9307A) ||	\
+	defined CONFIG_EDB9312 || defined(CONFIG_EDB9315) ||	\
+	defined(CONFIG_EDB9315A)
+/*
+ * 2x Samsung K4S561632C-TC/L75 4M x 16bit x 4 banks SDRAM
+ *
+ * CLK cycle time min:
+ *	@ CAS latency = 3: 7.5ns
+ *	@ CAS latency = 2: 10ns
+ * We're running at 100MHz (10ns cycle time) external bus speed (HCLK),
+ * so it's safe to use CAS latency = 2
+ *
+ * RAS-to-CAS delay min:
+ *	20ns
+ * At 10ns cycle time, we use RAS-to-CAS delay = 2
+ *
+ * EDB9307, EDB9312, EDB9315:
+ *
+ * 0x00000000 - 0x01ffffff
+ * 0x04000000 - 0x05ffffff
+ *
+ *
+ * EDB9307a, EDB9315a:
+ *
+ * 0xc0000000 - 0xc1ffffff
+ * 0xc4000000 - 0xc5ffffff
+ */
+
+#define SDRAM_DEVCFG_VAL	(SDRAM_DEVCFG_BANKCOUNT |		\
+				SDRAM_DEVCFG_SROMLL |			\
+				SDRAM_DEVCFG_CASLAT_2 |			\
+				SDRAM_DEVCFG_RASTOCAS_2)
+
+/*
+ * 32 bit ext. bus
+ *
+ * A[23:10] is output as SYA[13:0]
+ * CAS latency: 2
+ * Burst type: sequential
+ * Burst length: 4
+ * SYA[13:0] = 0x0022
+ */
+#define SDRAM_MODE_REG_VAL	0x8800
+
+#define SDRAM_BANK_SEL_0	0x00000000 /* A[23:22] = b00 */
+#define SDRAM_BANK_SEL_1	0x00400000 /* A[23:22] = b01 */
+#define SDRAM_BANK_SEL_2	0x00800000 /* A[23:22] = b10 */
+#define SDRAM_BANK_SEL_3	0x00c00000 /* A[23:22] = b11 */
+#endif
diff --git a/include/configs/edb93xx.h b/include/configs/edb93xx.h
new file mode 100644
index 0000000..4b00391
--- /dev/null
+++ b/include/configs/edb93xx.h
@@ -0,0 +1,270 @@
+/*
+ * U-boot - Configuration file for Cirrus Logic EDB93xx boards
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#ifdef CONFIG_MK_edb9301
+#define CONFIG_EDB9301
+#elif defined(CONFIG_MK_edb9302)
+#define CONFIG_EDB9302
+#elif defined(CONFIG_MK_edb9302a)
+#define CONFIG_EDB9302A
+#elif defined(CONFIG_MK_edb9307)
+#define CONFIG_EDB9307
+#elif defined(CONFIG_MK_edb9307a)
+#define CONFIG_EDB9307A
+#elif defined(CONFIG_MK_edb9312)
+#define CONFIG_EDB9312
+#elif defined(CONFIG_MK_edb9315)
+#define CONFIG_EDB9315
+#elif defined(CONFIG_MK_edb9315a)
+#define CONFIG_EDB9315A
+#else
+#error "no board defined"
+#endif
+
+/* Initial environment and monitor configuration options. */
+#define CONFIG_BOOTDELAY		2
+#define CONFIG_CMDLINE_TAG		1
+#define CONFIG_INITRD_TAG		1
+#define CONFIG_SETUP_MEMORY_TAGS	1
+#define CONFIG_BOOTARGS		"root=/dev/nfs console=ttyAM0,115200 ip=dhcp"
+#define CONFIG_BOOTFILE		"edb93xx.img"
+
+#define CONFIG_SYS_HUSH_PARSER		1
+#define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
+
+#ifdef CONFIG_EDB9301
+#define CONFIG_EP9301
+#define CONFIG_MACH_TYPE		MACH_TYPE_EDB9301
+#define CONFIG_SYS_PROMPT		"EDB9301> "
+#define CONFIG_ENV_SECT_SIZE		0x00020000
+#elif defined(CONFIG_EDB9302)
+#define CONFIG_EP9302
+#define CONFIG_MACH_TYPE		MACH_TYPE_EDB9302
+#define CONFIG_SYS_PROMPT		"EDB9302> "
+#define CONFIG_ENV_SECT_SIZE		0x00020000
+#elif defined(CONFIG_EDB9302A)
+#define CONFIG_EP9302
+#define CONFIG_MACH_TYPE		MACH_TYPE_EDB9302A
+#define CONFIG_SYS_PROMPT		"EDB9302A> "
+#define CONFIG_ENV_SECT_SIZE		0x00020000
+#elif defined(CONFIG_EDB9307)
+#define CONFIG_EP9307
+#define CONFIG_MACH_TYPE		MACH_TYPE_EDB9307
+#define CONFIG_SYS_PROMPT		"EDB9307> "
+#define CONFIG_ENV_SECT_SIZE		0x00040000
+#elif defined(CONFIG_EDB9307A)
+#define CONFIG_EP9307
+#define CONFIG_MACH_TYPE		MACH_TYPE_EDB9307A
+#define CONFIG_SYS_PROMPT		"EDB9307A> "
+#define CONFIG_ENV_SECT_SIZE		0x00040000
+#elif defined(CONFIG_EDB9312)
+#define CONFIG_EP9312
+#define CONFIG_MACH_TYPE		MACH_TYPE_EDB9312
+#define CONFIG_SYS_PROMPT		"EDB9312> "
+#define CONFIG_ENV_SECT_SIZE		0x00040000
+#elif defined(CONFIG_EDB9315)
+#define CONFIG_EP9315
+#define CONFIG_MACH_TYPE		MACH_TYPE_EDB9315
+#define CONFIG_SYS_PROMPT		"EDB9315> "
+#define CONFIG_ENV_SECT_SIZE		0x00040000
+#elif defined(CONFIG_EDB9315A)
+#define CONFIG_EP9315
+#define CONFIG_MACH_TYPE		MACH_TYPE_EDB9315A
+#define CONFIG_SYS_PROMPT		"EDB9315A> "
+#define CONFIG_ENV_SECT_SIZE		0x00040000
+#else
+#error "no board defined"
+#endif
+
+/* High-level configuration options */
+#define CONFIG_ARM920T		1		/* This is an ARM920T core... */
+#define CONFIG_EP93XX 		1		/* in a Cirrus Logic 93xx SoC */
+
+#define CONFIG_SYS_CLK_FREQ	14745600	/* EP93xx has a 14.7456 clock */
+#define CONFIG_SYS_HZ		1000		/* decr freq: 1 ms ticks      */
+#undef  CONFIG_USE_IRQ				/* Don't need IRQ/FIQ         */
+
+/* Monitor configuration */
+#include <config_cmd_default.h>
+#undef CONFIG_CMD_FPGA
+#undef CONFIG_CMD_SETGETDCR
+#undef CONFIG_CMD_XIMG
+
+#undef CONFIG_CMD_DATE
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_JFFS2
+
+#define CONFIG_SYS_LONGHELP			/* Enable "long" help in mon */
+#define CONFIG_SYS_CBSIZE		1024	/* Console I/O buffer size */
+/* Print buffer size */
+#define CONFIG_SYS_PBSIZE	(CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
+/* Boot argument buffer size */
+#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE
+#define CONFIG_SYS_MAXARGS	16		/* Max number of command args */
+
+/* Serial port hardware configuration */
+#define CONFIG_PL010_SERIAL
+#define CONFIG_CONS_INDEX		0
+#define CONFIG_BAUDRATE			115200
+#define CONFIG_SYS_BAUDRATE_TABLE	{9600, 19200, 38400, 57600, 115200}
+#define CONFIG_SYS_SERIAL0		0x808C0000
+#define CONFIG_SYS_SERIAL1		0x808D0000
+#define CONFIG_PL01x_PORTS	{(void *)CONFIG_SYS_SERIAL0, \
+			(void *)CONFIG_SYS_SERIAL1}
+
+/* Status LED */
+#define CONFIG_STATUS_LED		1 /* Status LED enabled	*/
+#define CONFIG_BOARD_SPECIFIC_LED	1
+#define STATUS_LED_GREEN		0
+#define STATUS_LED_RED			1
+/* Green */
+#define STATUS_LED_BIT			STATUS_LED_GREEN
+#define STATUS_LED_STATE		STATUS_LED_ON
+#define STATUS_LED_PERIOD		(CONFIG_SYS_HZ / 2)
+/* Red */
+#define STATUS_LED_BIT1			STATUS_LED_RED
+#define STATUS_LED_STATE1		STATUS_LED_OFF
+#define STATUS_LED_PERIOD1		(CONFIG_SYS_HZ / 2)
+/* Optional value */
+#define STATUS_LED_BOOT			STATUS_LED_BIT
+
+/* Network hardware configuration */
+#define CONFIG_DRIVER_EP93XX_MAC
+#define CONFIG_MII_SUPPRESS_PREAMBLE
+#define CONFIG_MII
+#define CONFIG_PHY_ADDR		1
+#define CONFIG_NET_MULTI
+#undef  CONFIG_NETCONSOLE
+
+/* SDRAM configuration */
+#if defined(CONFIG_EDB9301) || defined(CONFIG_EDB9302)
+/*
+ * EDB9301/2 has 4 banks of SDRAM consisting of 1x Samsung K4S561632E-TC75
+ * 256 Mbit SDRAM on a 16-bit data bus, for a total of 32MB of SDRAM. We set
+ * the SROMLL bit on the processor, resulting in this non-contiguous memory map.
+ */
+#define CONFIG_NR_DRAM_BANKS		4
+#define PHYS_SDRAM_1			0x00000000
+#define PHYS_SDRAM_SIZE_1		0x00800000
+#define PHYS_SDRAM_2			0x01000000
+#define PHYS_SDRAM_SIZE_2		0x00800000
+#define PHYS_SDRAM_3			0x04000000
+#define PHYS_SDRAM_SIZE_3		0x00800000
+#define PHYS_SDRAM_4			0x05000000
+#define PHYS_SDRAM_SIZE_4		0x00800000
+#define CONFIG_EDB93XX_SDCS3
+#define CONFIG_SYS_MEMTEST_START	0x00100000
+#define CONFIG_SYS_MEMTEST_END		0x007fffff
+
+#elif defined(CONFIG_EDB9302A)
+/*
+ * EDB9302a has 4 banks of SDRAM consisting of 1x Samsung K4S561632E-TC75
+ * 256 Mbit SDRAM on a 16-bit data bus, for a total of 32MB of SDRAM. We set
+ * the SROMLL bit on the processor, resulting in this non-contiguous memory map.
+ */
+#define CONFIG_NR_DRAM_BANKS		4
+#define PHYS_SDRAM_1			0xc0000000
+#define PHYS_SDRAM_SIZE_1		0x00800000
+#define PHYS_SDRAM_2			0xc1000000
+#define PHYS_SDRAM_SIZE_2		0x00800000
+#define PHYS_SDRAM_3			0xc4000000
+#define PHYS_SDRAM_SIZE_3		0x00800000
+#define PHYS_SDRAM_4			0xc5000000
+#define PHYS_SDRAM_SIZE_4		0x00800000
+#define CONFIG_EDB93XX_SDCS0
+#define CONFIG_SYS_MEMTEST_START	0xc0100000
+#define CONFIG_SYS_MEMTEST_END		0xc07fffff
+
+#elif defined(CONFIG_EDB9307) || defined CONFIG_EDB9312 || \
+	defined(CONFIG_EDB9315)
+/*
+ * The EDB9307, EDB9312, and EDB9315 have 2 banks of SDRAM consisting of
+ * 2x Samsung K4S561632E-TC75 256 Mbit on a 32-bit data bus, for a total of
+ * 64 MB of SDRAM.
+ */
+#define CONFIG_NR_DRAM_BANKS		2
+#define PHYS_SDRAM_1			0x00000000
+#define PHYS_SDRAM_SIZE_1		0x02000000
+#define PHYS_SDRAM_2			0x04000000
+#define PHYS_SDRAM_SIZE_2		0x02000000
+#define CONFIG_EDB93XX_SDCS3
+#define CONFIG_SYS_MEMTEST_START	0x00100000
+#define CONFIG_SYS_MEMTEST_END		0x01e00000
+
+#elif defined(CONFIG_EDB9307A) || defined(CONFIG_EDB9315A)
+/*
+ * The EDB9307A and EDB9315A have 2 banks of SDRAM consisting of 2x Samsung
+ * K4S561632E-TC75 256 Mbit on a 32-bit data bus, for a total of 64 MB of SDRAM.
+ */
+#define CONFIG_NR_DRAM_BANKS		2
+#define PHYS_SDRAM_1			0xc0000000
+#define PHYS_SDRAM_SIZE_1		0x02000000
+#define PHYS_SDRAM_2			0xc4000000
+#define PHYS_SDRAM_SIZE_2		0x02000000
+#define CONFIG_EDB93XX_SDCS0
+#define CONFIG_SYS_MEMTEST_START	0xc0100000
+#define CONFIG_SYS_MEMTEST_END		0xc1e00000
+#endif
+
+/* Default load address */
+#define CONFIG_SYS_LOAD_ADDR   (PHYS_SDRAM_1 + 0x01000000)
+
+/* Must match kernel config */
+#define LINUX_BOOT_PARAM_ADDR	(PHYS_SDRAM_1 + 0x100)
+
+/* Run-time memory allocatons */
+#define CONFIG_SYS_GBL_DATA_SIZE	128
+#define CONFIG_STACKSIZE		(128 * 1024)
+
+#if defined(CONFIG_USE_IRQ)
+#define CONFIG_STACKSIZE_IRQ	(4 * 1024)
+#define CONFIG_STACKSIZE_FIQ	(4 * 1024)
+#endif
+
+#define CONFIG_SYS_MALLOC_LEN		(512 * 1024)
+
+/* -----------------------------------------------------------------------------
+ * FLASH and environment organization
+ *
+ * The EDB9301 and EDB9302(a) have 1 bank of flash memory at 0x60000000
+ * consisting of 1x Intel TE28F128J3C-150 128 Mbit flash on a 16-bit data bus,
+ * for a total of 16 MB of CFI-compatible flash.
+ *
+ * The EDB9307(a), EDB9312, and EDB9315(a) have 1 bank of flash memory at
+ * 0x60000000 consisting of 2x Micron MT28F128J3-12 128 Mbit flash on a 32-bit
+ * data bus, for a total of 32 MB of CFI-compatible flash.
+ *
+ *                            EDB9301/02(a)          EDB9307(a)/12/15(a)
+ * 0x60000000 - 0x0003FFFF    u-boot                 u-boot
+ * 0x60040000 - 0x0005FFFF    environment #1         environment #1
+ * 0x60060000 - 0x0007FFFF    environment #2         environment #1 (continued)
+ * 0x60080000 - 0x0009FFFF    unused                 environment #2
+ * 0x600A0000 - 0x000BFFFF    unused                 environment #2 (continued)
+ * 0x600C0000 - 0x00FFFFFF    unused                 unused
+ * 0x61000000 - 0x01FFFFFF    not present            unused
+ */
+#define CONFIG_SYS_FLASH_CFI
+#define CONFIG_FLASH_CFI_DRIVER
+#define CONFIG_SYS_MAX_FLASH_BANKS	1
+#define CONFIG_SYS_MAX_FLASH_SECT	128
+
+#define PHYS_FLASH_1			0x60000000
+#define CONFIG_SYS_FLASH_BASE		(PHYS_FLASH_1)
+#define CONFIG_SYS_MONITOR_BASE		CONFIG_SYS_FLASH_BASE
+#define CONFIG_SYS_MONITOR_LEN		(256 * 1024)
+
+#define CONFIG_ENV_OVERWRITE		/* Vendor params unprotected */
+#define CONFIG_ENV_IS_IN_FLASH
+#define CONFIG_ENV_ADDR			0x60040000
+
+#define CONFIG_ENV_ADDR_REDUND		(CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE)
+
+#define CONFIG_ENV_SIZE			CONFIG_ENV_SECT_SIZE
+#define CONFIG_ENV_SIZE_REDUND		CONFIG_ENV_SIZE
+
+#endif /* !defined (__CONFIG_H) */