Blackfin: support boards with no external memory

Signed-off-by: Mike Frysinger <vapier@gentoo.org>

5 files changed, 61 insertions, 20 deletions

diff --git a/cpu/blackfin/initcode.c b/cpu/blackfin/initcode.c
index bb58898..ed43f85 100644
--- a/cpu/blackfin/initcode.c
+++ b/cpu/blackfin/initcode.c
@@ -538,10 +538,18 @@ program_memory_controller(ADI_BOOT_DATA *bs, bool put_into_srfs)
 	 * self-refresh.  So we have to pull it out before programming.
 	 */
 #ifdef EBIU_RSTCTL
+# ifdef CONFIG_EBIU_RSTCTL_VAL
 	bfin_write_EBIU_RSTCTL(bfin_read_EBIU_RSTCTL() | 0x1 /*DDRSRESET*/ | CONFIG_EBIU_RSTCTL_VAL);
+# endif
+# ifdef CONFIG_EBIU_DDRCTL0_VAL
 	bfin_write_EBIU_DDRCTL0(CONFIG_EBIU_DDRCTL0_VAL);
+# endif
+# ifdef CONFIG_EBIU_DDRCTL1_VAL
 	bfin_write_EBIU_DDRCTL1(CONFIG_EBIU_DDRCTL1_VAL);
+# endif
+# ifdef CONFIG_EBIU_DDRCTL2_VAL
 	bfin_write_EBIU_DDRCTL2(CONFIG_EBIU_DDRCTL2_VAL);
+# endif
 # ifdef CONFIG_EBIU_DDRCTL3_VAL
 	/* default is disable, so don't need to force this */
 	bfin_write_EBIU_DDRCTL3(CONFIG_EBIU_DDRCTL3_VAL);
@@ -611,11 +619,17 @@ program_async_controller(ADI_BOOT_DATA *bs)
 
 	serial_putc('b');
 
-#ifdef EBIU_MODE
 	/* Not all parts have these additional MMRs. */
+#ifdef EBIU_MODE
+# ifdef CONFIG_EBIU_MBSCTL_VAL
 	bfin_write_EBIU_MBSCTL(CONFIG_EBIU_MBSCTL_VAL);
+# endif
+# ifdef CONFIG_EBIU_MODE_VAL
 	bfin_write_EBIU_MODE(CONFIG_EBIU_MODE_VAL);
+# endif
+# ifdef CONFIG_EBIU_FCTL_VAL
 	bfin_write_EBIU_FCTL(CONFIG_EBIU_FCTL_VAL);
+# endif
 #endif
 
 	serial_putc('c');
diff --git a/cpu/blackfin/start.S b/cpu/blackfin/start.S
index 44e2725..7a3abba 100644
--- a/cpu/blackfin/start.S
+++ b/cpu/blackfin/start.S
@@ -95,6 +95,7 @@ ENTRY(_start)
 	/* Save RETX so we can pass it while booting Linux */
 	r7 = RETX;
 
+#if CONFIG_MEM_SIZE
 	/* Figure out where we are currently executing so that we can decide
 	 * how to best reprogram and relocate things.  We'll pass below:
 	 *  R4: load address of _start
@@ -131,6 +132,9 @@ ENTRY(_start)
 	r3.h = 0x2000;
 	cc = r5 < r3 (iu);
 	if cc jump .Ldma_and_reprogram;
+#else
+	r6 = 1 (x);	/* fake loaded_from_ldr = 1 */
+#endif
 	r0 = 0 (x);	/* set bootstruct to NULL */
 	call _initcode;
 	jump .Lprogrammed;
@@ -154,6 +158,7 @@ ENTRY(_start)
 .Lprogrammed:
 	serial_early_set_baud
 
+#if CONFIG_MEM_SIZE
 	/* Relocate from wherever we are (FLASH/RAM/etc...) to the hardcoded
 	 * monitor location in the end of RAM.  We know that memcpy() only
 	 * uses registers, so it is safe to call here.  Note that this only
@@ -166,6 +171,7 @@ ENTRY(_start)
 	r2.l = LO(CONFIG_SYS_MONITOR_LEN);
 	r2.h = HI(CONFIG_SYS_MONITOR_LEN);
 	call _memcpy_ASM;
+#endif
 
 	/* Initialize BSS section ... we know that memset() does not
 	 * use the BSS, so it is safe to call here.  The bootrom LDR
diff --git a/include/asm-blackfin/config.h b/include/asm-blackfin/config.h
index fbfd598..0ae838a 100644
--- a/include/asm-blackfin/config.h
+++ b/include/asm-blackfin/config.h
@@ -92,7 +92,11 @@
 # define CONFIG_SYS_MAX_RAM_SIZE (CONFIG_MEM_SIZE * 1024 * 1024)
 #endif
 #ifndef CONFIG_SYS_MONITOR_BASE
-# define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_MAX_RAM_SIZE - CONFIG_SYS_MONITOR_LEN)
+# if CONFIG_SYS_MAX_RAM_SIZE
+#  define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_MAX_RAM_SIZE - CONFIG_SYS_MONITOR_LEN)
+# else
+#  define CONFIG_SYS_MONITOR_BASE 0
+# endif
 #endif
 #ifndef CONFIG_SYS_MALLOC_BASE
 # define CONFIG_SYS_MALLOC_BASE (CONFIG_SYS_MONITOR_BASE - CONFIG_SYS_MALLOC_LEN)
@@ -114,7 +118,8 @@
 #endif
 
 /* Check to make sure everything fits in external RAM */
-#if ((CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN) > CONFIG_SYS_MAX_RAM_SIZE)
+#if CONFIG_SYS_MAX_RAM_SIZE && \
+    ((CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN) > CONFIG_SYS_MAX_RAM_SIZE)
 # error Memory Map does not fit into configuration
 #endif
 
diff --git a/lib_blackfin/board.c b/lib_blackfin/board.c
index b414b2a..ed4e77b 100644
--- a/lib_blackfin/board.c
+++ b/lib_blackfin/board.c
@@ -130,17 +130,26 @@ void init_cplbtables(void)
 	dcplb_add(0xFF800000, L1_DMEMORY);
 	++i;
 
-	icplb_add(CONFIG_SYS_MONITOR_BASE & CPLB_PAGE_MASK, SDRAM_IKERNEL);
-	dcplb_add(CONFIG_SYS_MONITOR_BASE & CPLB_PAGE_MASK, SDRAM_DKERNEL);
-	++i;
-
-	/* If the monitor crosses a 4 meg boundary, we'll need
-	 * to lock two entries for it.
-	 */
-	if ((CONFIG_SYS_MONITOR_BASE & CPLB_PAGE_MASK) != ((CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN) & CPLB_PAGE_MASK)) {
-		icplb_add((CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN) & CPLB_PAGE_MASK, SDRAM_IKERNEL);
-		dcplb_add((CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN) & CPLB_PAGE_MASK, SDRAM_DKERNEL);
+	if (CONFIG_MEM_SIZE) {
+		uint32_t mbase = CONFIG_SYS_MONITOR_BASE;
+		uint32_t mend  = mbase + CONFIG_SYS_MONITOR_LEN;
+		mbase &= CPLB_PAGE_MASK;
+		mend &= CPLB_PAGE_MASK;
+
+		icplb_add(mbase, SDRAM_IKERNEL);
+		dcplb_add(mbase, SDRAM_DKERNEL);
 		++i;
+
+		/*
+		 * If the monitor crosses a 4 meg boundary, we'll need
+		 * to lock two entries for it.  We assume it doesn't
+		 * cross two 4 meg boundaries ...
+		 */
+		if (mbase != mend) {
+			icplb_add(mend, SDRAM_IKERNEL);
+			dcplb_add(mend, SDRAM_DKERNEL);
+			++i;
+		}
 	}
 
 	icplb_add(0x20000000, SDRAM_INON_CHBL);
diff --git a/lib_blackfin/u-boot.lds.S b/lib_blackfin/u-boot.lds.S
index 8a9e8b1..deb94c9 100644
--- a/lib_blackfin/u-boot.lds.S
+++ b/lib_blackfin/u-boot.lds.S
@@ -57,7 +57,14 @@ OUTPUT_ARCH(bfin)
 
 MEMORY
 {
+#if CONFIG_MEM_SIZE
 	ram     : ORIGIN = CONFIG_SYS_MONITOR_BASE, LENGTH = CONFIG_SYS_MONITOR_LEN
+# define ram_code ram
+# define ram_data ram
+#else
+# define ram_code l1_code
+# define ram_data l1_data
+#endif
 	l1_code : ORIGIN = L1_CODE_ORIGIN,          LENGTH = L1_INST_SRAM_SIZE
 	l1_data : ORIGIN = L1_DATA_B_SRAM,          LENGTH = L1_DATA_B_SRAM_SIZE
 }
@@ -82,7 +89,7 @@ SECTIONS
 	.text :
 	{
 		*(.text .text.*)
-	} >ram
+	} >ram_code
 
 	.rodata :
 	{
@@ -91,7 +98,7 @@ SECTIONS
 		*(.rodata1)
 		*(.eh_frame)
 		. = ALIGN(4);
-	} >ram
+	} >ram_data
 
 	.data :
 	{
@@ -102,14 +109,14 @@ SECTIONS
 		*(.sdata2)
 		*(.dynamic)
 		CONSTRUCTORS
-	} >ram
+	} >ram_data
 
 	.u_boot_cmd :
 	{
 		___u_boot_cmd_start = .;
 		*(.u_boot_cmd)
 		___u_boot_cmd_end = .;
-	} >ram
+	} >ram_data
 
 	.text_l1 :
 	{
@@ -118,7 +125,7 @@ SECTIONS
 		*(.l1.text)
 		. = ALIGN(4);
 		__etext_l1 = .;
-	} >l1_code AT>ram
+	} >l1_code AT>ram_code
 	__text_l1_lma = LOADADDR(.text_l1);
 	__text_l1_len = SIZEOF(.text_l1);
 	ASSERT (__text_l1_len <= L1_INST_SRAM_SIZE, "L1 text overflow!")
@@ -131,7 +138,7 @@ SECTIONS
 		*(.l1.bss)
 		. = ALIGN(4);
 		__edata_l1 = .;
-	} >l1_data AT>ram
+	} >l1_data AT>ram_data
 	__data_l1_lma = LOADADDR(.data_l1);
 	__data_l1_len = SIZEOF(.data_l1);
 	ASSERT (__data_l1_len <= L1_DATA_B_SRAM_SIZE, "L1 data B overflow!")
@@ -143,7 +150,7 @@ SECTIONS
 		*(.dynbss)
 		*(.bss .bss.*)
 		*(COMMON)
-	} >ram
+	} >ram_data
 	__bss_vma = ADDR(.bss);
 	__bss_len = SIZEOF(.bss);
 }