ppc4xx: Consolidate 4xx PCIe board specific configuration

This patch consolidates the PPC4xx board specific PCIe configuration
code. This way the duplicated code is removed. Boards can implement a
special, non standard behaviour (e.g. number of PCIe slots, etc) by
overriding the weak default functions.

Signed-off-by: Stefan Roese <sr@denx.de>

7 files changed, 172 insertions, 442 deletions

diff --git a/board/amcc/canyonlands/canyonlands.c b/board/amcc/canyonlands/canyonlands.c
index 91fae19..8ce6788 100644
--- a/board/amcc/canyonlands/canyonlands.c
+++ b/board/amcc/canyonlands/canyonlands.c
@@ -383,84 +383,16 @@ int is_pci_host(struct pci_controller *hose)
 	return (1);
 }
 
-static struct pci_controller pcie_hose[2] = {{0},{0}};
-
-void pcie_setup_hoses(int busno)
+int board_pcie_first(void)
 {
-	struct pci_controller *hose;
-	int i, bus;
-	int ret = 0;
-	char *env;
-	unsigned int delay;
-	int start;
-
-	/*
-	 * assume we're called after the PCIX hose is initialized, which takes
-	 * bus ID 0 and therefore start numbering PCIe's from 1.
-	 */
-	bus = busno;
-
 	/*
 	 * Canyonlands with SATA enabled has only one PCIe slot
 	 * (2nd one).
 	 */
 	if (gd->board_type == BOARD_CANYONLANDS_SATA)
-		start = 1;
-	else
-		start = 0;
-
-	for (i = start; i <= 1; i++) {
+		return 1;
 
-		if (is_end_point(i))
-			ret = ppc4xx_init_pcie_endport(i);
-		else
-			ret = ppc4xx_init_pcie_rootport(i);
-		if (ret == -ENODEV)
-			continue;
-		if (ret) {
-			printf("PCIE%d: initialization as %s failed\n", i,
-			       is_end_point(i) ? "endpoint" : "root-complex");
-			continue;
-		}
-
-		hose = &pcie_hose[i];
-		hose->first_busno = bus;
-		hose->last_busno = bus;
-		hose->current_busno = bus;
-
-		/* setup mem resource */
-		pci_set_region(hose->regions + 0,
-			       CONFIG_SYS_PCIE_MEMBASE + i * CONFIG_SYS_PCIE_MEMSIZE,
-			       CONFIG_SYS_PCIE_MEMBASE + i * CONFIG_SYS_PCIE_MEMSIZE,
-			       CONFIG_SYS_PCIE_MEMSIZE,
-			       PCI_REGION_MEM);
-		hose->region_count = 1;
-		pci_register_hose(hose);
-
-		if (is_end_point(i)) {
-			ppc4xx_setup_pcie_endpoint(hose, i);
-			/*
-			 * Reson for no scanning is endpoint can not generate
-			 * upstream configuration accesses.
-			 */
-		} else {
-			ppc4xx_setup_pcie_rootpoint(hose, i);
-			env = getenv ("pciscandelay");
-			if (env != NULL) {
-				delay = simple_strtoul(env, NULL, 10);
-				if (delay > 5)
-					printf("Warning, expect noticable delay before "
-					       "PCIe scan due to 'pciscandelay' value!\n");
-				mdelay(delay * 1000);
-			}
-
-			/*
-			 * Config access can only go down stream
-			 */
-			hose->last_busno = pci_hose_scan(hose);
-			bus = hose->last_busno + 1;
-		}
-	}
+	return 0;
 }
 #endif /* CONFIG_PCI */
 
diff --git a/board/amcc/katmai/katmai.c b/board/amcc/katmai/katmai.c
index 908f1a5..34ecd99 100644
--- a/board/amcc/katmai/katmai.c
+++ b/board/amcc/katmai/katmai.c
@@ -351,7 +351,7 @@ int is_pci_host(struct pci_controller *hose)
 	return 1;
 }
 
-static int katmai_pcie_card_present(int port)
+int board_pcie_card_present(int port)
 {
 	u32 val;
 
@@ -367,78 +367,6 @@ static int katmai_pcie_card_present(int port)
 		return 0;
 	}
 }
-
-static struct pci_controller pcie_hose[3] = {{0},{0},{0}};
-
-void pcie_setup_hoses(int busno)
-{
-	struct pci_controller *hose;
-	int i, bus;
-	int ret = 0;
-	char *env;
-	unsigned int delay;
-
-	/*
-	 * assume we're called after the PCIX hose is initialized, which takes
-	 * bus ID 0 and therefore start numbering PCIe's from 1.
-	 */
-	bus = busno;
-	for (i = 0; i <= 2; i++) {
-		/* Check for katmai card presence */
-		if (!katmai_pcie_card_present(i))
-			continue;
-
-		if (is_end_point(i))
-			ret = ppc4xx_init_pcie_endport(i);
-		else
-			ret = ppc4xx_init_pcie_rootport(i);
-		if (ret == -ENODEV)
-			continue;
-		if (ret) {
-			printf("PCIE%d: initialization as %s failed\n", i,
-			       is_end_point(i) ? "endpoint" : "root-complex");
-			continue;
-		}
-
-		hose = &pcie_hose[i];
-		hose->first_busno = bus;
-		hose->last_busno = bus;
-		hose->current_busno = bus;
-
-		/* setup mem resource */
-		pci_set_region(hose->regions + 0,
-			       CONFIG_SYS_PCIE_MEMBASE + i * CONFIG_SYS_PCIE_MEMSIZE,
-			       CONFIG_SYS_PCIE_MEMBASE + i * CONFIG_SYS_PCIE_MEMSIZE,
-			       CONFIG_SYS_PCIE_MEMSIZE,
-			       PCI_REGION_MEM);
-		hose->region_count = 1;
-		pci_register_hose(hose);
-
-		if (is_end_point(i)) {
-			ppc4xx_setup_pcie_endpoint(hose, i);
-			/*
-			 * Reson for no scanning is endpoint can not generate
-			 * upstream configuration accesses.
-			 */
-		} else {
-			ppc4xx_setup_pcie_rootpoint(hose, i);
-			env = getenv ("pciscandelay");
-			if (env != NULL) {
-				delay = simple_strtoul(env, NULL, 10);
-				if (delay > 5)
-					printf("Warning, expect noticable delay before "
-					       "PCIe scan due to 'pciscandelay' value!\n");
-				mdelay(delay * 1000);
-			}
-
-			/*
-			 * Config access can only go down stream
-			 */
-			hose->last_busno = pci_hose_scan(hose);
-			bus = hose->last_busno + 1;
-		}
-	}
-}
 #endif	/* defined(CONFIG_PCI) */
 
 #ifdef CONFIG_POST
diff --git a/board/amcc/kilauea/kilauea.c b/board/amcc/kilauea/kilauea.c
index 5cd822a..c4f8a64 100644
--- a/board/amcc/kilauea/kilauea.c
+++ b/board/amcc/kilauea/kilauea.c
@@ -252,15 +252,19 @@ int board_emac_count(void)
 		return 2;
 }
 
-static int board_pcie_count(void)
+/*
+ * Override the weak default implementation and return the
+ * last PCIe slot number (max number - 1).
+ */
+int board_pcie_last(void)
 {
 	/*
 	 * 405EXr only has one EMAC interface, 405EX has two
 	 */
 	if (is_405exr())
-		return 1;
+		return 1 - 1;
 	else
-		return 2;
+		return 2 - 1;
 }
 
 int checkboard (void)
@@ -300,73 +304,6 @@ int pci_pre_init(struct pci_controller * hose )
 }
 #endif  /* defined(CONFIG_PCI) */
 
-#ifdef CONFIG_PCI
-static struct pci_controller pcie_hose[2] = {{0},{0}};
-
-void pcie_setup_hoses(int busno)
-{
-	struct pci_controller *hose;
-	int i, bus;
-	int ret = 0;
-	bus = busno;
-	char *env;
-	unsigned int delay;
-
-	for (i = 0; i < board_pcie_count(); i++) {
-
-		if (is_end_point(i))
-			ret = ppc4xx_init_pcie_endport(i);
-		else
-			ret = ppc4xx_init_pcie_rootport(i);
-		if (ret == -ENODEV)
-			continue;
-		if (ret) {
-			printf("PCIE%d: initialization as %s failed\n", i,
-			       is_end_point(i) ? "endpoint" : "root-complex");
-			continue;
-		}
-
-		hose = &pcie_hose[i];
-		hose->first_busno = bus;
-		hose->last_busno = bus;
-		hose->current_busno = bus;
-
-		/* setup mem resource */
-		pci_set_region(hose->regions + 0,
-			       CONFIG_SYS_PCIE_MEMBASE + i * CONFIG_SYS_PCIE_MEMSIZE,
-			       CONFIG_SYS_PCIE_MEMBASE + i * CONFIG_SYS_PCIE_MEMSIZE,
-			       CONFIG_SYS_PCIE_MEMSIZE,
-			       PCI_REGION_MEM);
-		hose->region_count = 1;
-		pci_register_hose(hose);
-
-		if (is_end_point(i)) {
-			ppc4xx_setup_pcie_endpoint(hose, i);
-			/*
-			 * Reson for no scanning is endpoint can not generate
-			 * upstream configuration accesses.
-			 */
-		} else {
-			ppc4xx_setup_pcie_rootpoint(hose, i);
-			env = getenv ("pciscandelay");
-			if (env != NULL) {
-				delay = simple_strtoul(env, NULL, 10);
-				if (delay > 5)
-					printf("Warning, expect noticable delay before "
-					       "PCIe scan due to 'pciscandelay' value!\n");
-				mdelay(delay * 1000);
-			}
-
-			/*
-			 * Config access can only go down stream
-			 */
-			hose->last_busno = pci_hose_scan(hose);
-			bus = hose->last_busno + 1;
-		}
-	}
-}
-#endif
-
 #if defined(CONFIG_POST)
 /*
  * Returns 1 if keys pressed to start the power-on long-running tests
diff --git a/board/amcc/makalu/makalu.c b/board/amcc/makalu/makalu.c
index d4277dd..43b9bc6 100644
--- a/board/amcc/makalu/makalu.c
+++ b/board/amcc/makalu/makalu.c
@@ -256,73 +256,6 @@ int pci_pre_init(struct pci_controller * hose )
 }
 #endif  /* defined(CONFIG_PCI) */
 
-#ifdef CONFIG_PCI
-static struct pci_controller pcie_hose[2] = {{0},{0}};
-
-void pcie_setup_hoses(int busno)
-{
-	struct pci_controller *hose;
-	int i, bus;
-	int ret = 0;
-	bus = busno;
-	char *env;
-	unsigned int delay;
-
-	for (i = 0; i < 2; i++) {
-
-		if (is_end_point(i))
-			ret = ppc4xx_init_pcie_endport(i);
-		else
-			ret = ppc4xx_init_pcie_rootport(i);
-		if (ret == -ENODEV)
-			continue;
-		if (ret) {
-			printf("PCIE%d: initialization as %s failed\n", i,
-			       is_end_point(i) ? "endpoint" : "root-complex");
-			continue;
-		}
-
-		hose = &pcie_hose[i];
-		hose->first_busno = bus;
-		hose->last_busno = bus;
-		hose->current_busno = bus;
-
-		/* setup mem resource */
-		pci_set_region(hose->regions + 0,
-			       CONFIG_SYS_PCIE_MEMBASE + i * CONFIG_SYS_PCIE_MEMSIZE,
-			       CONFIG_SYS_PCIE_MEMBASE + i * CONFIG_SYS_PCIE_MEMSIZE,
-			       CONFIG_SYS_PCIE_MEMSIZE,
-			       PCI_REGION_MEM);
-		hose->region_count = 1;
-		pci_register_hose(hose);
-
-		if (is_end_point(i)) {
-			ppc4xx_setup_pcie_endpoint(hose, i);
-			/*
-			 * Reson for no scanning is endpoint can not generate
-			 * upstream configuration accesses.
-			 */
-		} else {
-			ppc4xx_setup_pcie_rootpoint(hose, i);
-			env = getenv ("pciscandelay");
-			if (env != NULL) {
-				delay = simple_strtoul(env, NULL, 10);
-				if (delay > 5)
-					printf("Warning, expect noticable delay before "
-					       "PCIe scan due to 'pciscandelay' value!\n");
-				mdelay(delay * 1000);
-			}
-
-			/*
-			 * Config access can only go down stream
-			 */
-			hose->last_busno = pci_hose_scan(hose);
-			bus = hose->last_busno + 1;
-		}
-	}
-}
-#endif
-
 #if defined(CONFIG_POST)
 /*
  * Returns 1 if keys pressed to start the power-on long-running tests
diff --git a/board/amcc/yucca/yucca.c b/board/amcc/yucca/yucca.c
index d8f4bcb..6493155 100644
--- a/board/amcc/yucca/yucca.c
+++ b/board/amcc/yucca/yucca.c
@@ -679,7 +679,7 @@ int is_pci_host(struct pci_controller *hose)
 	return 1;
 }
 
-static int yucca_pcie_card_present(int port)
+int board_pcie_card_present(int port)
 {
 	u16 reg;
 
@@ -697,185 +697,54 @@ static int yucca_pcie_card_present(int port)
 }
 
 /*
- * For the given slot, set rootpoint mode, send power to the slot,
- * turn on the green LED and turn off the yellow LED, enable the clock
- * and turn off reset.
- */
-void yucca_setup_pcie_fpga_rootpoint(int port)
-{
-	u16 power, clock, green_led, yellow_led, reset_off, rootpoint, endpoint;
-
-	switch(port) {
-	case 0:
-		rootpoint   = FPGA_REG1C_PE0_ROOTPOINT;
-		endpoint    = 0;
-		power	    = FPGA_REG1A_PE0_PWRON;
-		green_led   = FPGA_REG1A_PE0_GLED;
-		clock	    = FPGA_REG1A_PE0_REFCLK_ENABLE;
-		yellow_led  = FPGA_REG1A_PE0_YLED;
-		reset_off   = FPGA_REG1C_PE0_PERST;
-		break;
-	case 1:
-		rootpoint   = 0;
-		endpoint    = FPGA_REG1C_PE1_ENDPOINT;
-		power	    = FPGA_REG1A_PE1_PWRON;
-		green_led   = FPGA_REG1A_PE1_GLED;
-		clock	    = FPGA_REG1A_PE1_REFCLK_ENABLE;
-		yellow_led  = FPGA_REG1A_PE1_YLED;
-		reset_off   = FPGA_REG1C_PE1_PERST;
-		break;
-	case 2:
-		rootpoint   = 0;
-		endpoint    = FPGA_REG1C_PE2_ENDPOINT;
-		power	    = FPGA_REG1A_PE2_PWRON;
-		green_led   = FPGA_REG1A_PE2_GLED;
-		clock	    = FPGA_REG1A_PE2_REFCLK_ENABLE;
-		yellow_led  = FPGA_REG1A_PE2_YLED;
-		reset_off   = FPGA_REG1C_PE2_PERST;
-		break;
-
-	default:
-		return;
-	}
-
-	out_be16((u16 *)FPGA_REG1A,
-		 ~(power | clock | green_led) &
-		 (yellow_led | in_be16((u16 *)FPGA_REG1A)));
-
-	out_be16((u16 *)FPGA_REG1C,
-		 ~(endpoint | reset_off) &
-		 (rootpoint | in_be16((u16 *)FPGA_REG1C)));
-	/*
-	 * Leave device in reset for a while after powering on the
-	 * slot to give it a chance to initialize.
-	 */
-	udelay(250 * 1000);
-
-	out_be16((u16 *)FPGA_REG1C, reset_off | in_be16((u16 *)FPGA_REG1C));
-}
-/*
  * For the given slot, set endpoint mode, send power to the slot,
- * turn on the green LED and turn off the yellow LED, enable the clock
- * .In end point mode reset bit is  read only.
+ * turn on the green LED and turn off the yellow LED, enable the
+ * clock. In end point mode reset bit is read only.
  */
-void yucca_setup_pcie_fpga_endpoint(int port)
+void board_pcie_setup_port(int port, int rootpoint)
 {
-	u16 power, clock, green_led, yellow_led, reset_off, rootpoint, endpoint;
+	u16 power, clock, green_led, yellow_led,
+		reset_off, rp, ep;
 
-	switch(port) {
+	switch (port) {
 	case 0:
-		rootpoint   = FPGA_REG1C_PE0_ROOTPOINT;
-		endpoint    = 0;
-		power	    = FPGA_REG1A_PE0_PWRON;
-		green_led   = FPGA_REG1A_PE0_GLED;
-		clock	    = FPGA_REG1A_PE0_REFCLK_ENABLE;
-		yellow_led  = FPGA_REG1A_PE0_YLED;
-		reset_off   = FPGA_REG1C_PE0_PERST;
+		rp = FPGA_REG1C_PE0_ROOTPOINT;
+		ep = 0;
 		break;
 	case 1:
-		rootpoint   = 0;
-		endpoint    = FPGA_REG1C_PE1_ENDPOINT;
-		power	    = FPGA_REG1A_PE1_PWRON;
-		green_led   = FPGA_REG1A_PE1_GLED;
-		clock	    = FPGA_REG1A_PE1_REFCLK_ENABLE;
-		yellow_led  = FPGA_REG1A_PE1_YLED;
-		reset_off   = FPGA_REG1C_PE1_PERST;
+		rp = 0;
+		ep = FPGA_REG1C_PE1_ENDPOINT;
 		break;
 	case 2:
-		rootpoint   = 0;
-		endpoint    = FPGA_REG1C_PE2_ENDPOINT;
-		power	    = FPGA_REG1A_PE2_PWRON;
-		green_led   = FPGA_REG1A_PE2_GLED;
-		clock	    = FPGA_REG1A_PE2_REFCLK_ENABLE;
-		yellow_led  = FPGA_REG1A_PE2_YLED;
-		reset_off   = FPGA_REG1C_PE2_PERST;
+		rp = 0;
+		ep = FPGA_REG1C_PE2_ENDPOINT;
 		break;
 
 	default:
 		return;
 	}
 
-	out_be16((u16 *)FPGA_REG1A,
-		 ~(power | clock | green_led) &
-		 (yellow_led | in_be16((u16 *)FPGA_REG1A)));
+	power = FPGA_REG1A_PWRON_ENCODE(port);
+	green_led = FPGA_REG1A_GLED_ENCODE(port);
+	clock = FPGA_REG1A_REFCLK_ENCODE(port);
+	yellow_led = FPGA_REG1A_YLED_ENCODE(port);
+	reset_off = FPGA_REG1C_PERST_ENCODE(port);
 
-	out_be16((u16 *)FPGA_REG1C,
-		 ~(rootpoint | reset_off) &
-		 (endpoint | in_be16((u16 *)FPGA_REG1C)));
-}
+	out_be16((u16 *)FPGA_REG1A, ~(power | clock | green_led) &
+		 (yellow_led | in_be16((u16 *)FPGA_REG1A)));
 
-static struct pci_controller pcie_hose[3] = {{0},{0},{0}};
+	out_be16((u16 *)FPGA_REG1C, ~(ep | reset_off) &
+		 (rp | in_be16((u16 *)FPGA_REG1C)));
 
-void pcie_setup_hoses(int busno)
-{
-	struct pci_controller *hose;
-	int i, bus;
-	int ret = 0;
-	char *env;
-	unsigned int delay;
+	if (rootpoint) {
+		/*
+		 * Leave device in reset for a while after powering on the
+		 * slot to give it a chance to initialize.
+		 */
+		udelay(250 * 1000);
 
-	/*
-	 * assume we're called after the PCIX hose is initialized, which takes
-	 * bus ID 0 and therefore start numbering PCIe's from 1.
-	 */
-	bus = busno;
-	for (i = 0; i <= 2; i++) {
-		/* Check for yucca card presence */
-		if (!yucca_pcie_card_present(i))
-			continue;
-
-		if (is_end_point(i)) {
-			yucca_setup_pcie_fpga_endpoint(i);
-			ret = ppc4xx_init_pcie_endport(i);
-		} else {
-			yucca_setup_pcie_fpga_rootpoint(i);
-			ret = ppc4xx_init_pcie_rootport(i);
-		}
-		if (ret == -ENODEV)
-			continue;
-		if (ret) {
-			printf("PCIE%d: initialization as %s failed\n", i,
-			       is_end_point(i) ? "endpoint" : "root-complex");
-			continue;
-		}
-
-		hose = &pcie_hose[i];
-		hose->first_busno = bus;
-		hose->last_busno = bus;
-		hose->current_busno = bus;
-
-		/* setup mem resource */
-		pci_set_region(hose->regions + 0,
-			CONFIG_SYS_PCIE_MEMBASE + i * CONFIG_SYS_PCIE_MEMSIZE,
-			CONFIG_SYS_PCIE_MEMBASE + i * CONFIG_SYS_PCIE_MEMSIZE,
-			CONFIG_SYS_PCIE_MEMSIZE,
-			PCI_REGION_MEM);
-		hose->region_count = 1;
-		pci_register_hose(hose);
-
-		if (is_end_point(i)) {
-			ppc4xx_setup_pcie_endpoint(hose, i);
-			/*
-			 * Reson for no scanning is endpoint can not generate
-			 * upstream configuration accesses.
-			 */
-		} else {
-			ppc4xx_setup_pcie_rootpoint(hose, i);
-			env = getenv("pciscandelay");
-			if (env != NULL) {
-				delay = simple_strtoul(env, NULL, 10);
-				if (delay > 5)
-					printf("Warning, expect noticable delay before "
-					       "PCIe scan due to 'pciscandelay' value!\n");
-				mdelay(delay * 1000);
-			}
-
-			/*
-			 * Config access can only go down stream
-			 */
-			hose->last_busno = pci_hose_scan(hose);
-			bus = hose->last_busno + 1;
-		}
+		out_be16((u16 *)FPGA_REG1C,
+			 reset_off | in_be16((u16 *)FPGA_REG1C));
 	}
 }
 #endif	/* defined(CONFIG_PCI) */
diff --git a/cpu/ppc4xx/4xx_pcie.c b/cpu/ppc4xx/4xx_pcie.c
index 19d2c7d..c4d9cfe 100644
--- a/cpu/ppc4xx/4xx_pcie.c
+++ b/cpu/ppc4xx/4xx_pcie.c
@@ -48,6 +48,129 @@ enum {
 	LNKW_X8			= 0x8
 };
 
+#if 1 // test-only
+int board_pcie_first(void);
+int board_pcie_last(void);
+static struct pci_controller pcie_hose[CONFIG_SYS_PCIE_NR_PORTS];
+
+/*
+ * Per default, all cards are present, so we need to check if the
+ * link comes up.
+ */
+int __board_pcie_card_present(int port)
+{
+	return 1;
+}
+int board_pcie_card_present(int port)
+	__attribute__((weak, alias("__board_pcie_card_present")));
+
+/*
+ * Some boards have runtime detection of the first and last PCIe
+ * slot used, so let's provide weak default functions for the
+ * common version.
+ */
+int __board_pcie_first(void)
+{
+	return 0;
+}
+int board_pcie_first(void)
+	__attribute__((weak, alias("__board_pcie_first")));
+
+int __board_pcie_last(void)
+{
+	return CONFIG_SYS_PCIE_NR_PORTS - 1;
+}
+int board_pcie_last(void)
+	__attribute__((weak, alias("__board_pcie_last")));
+
+void __board_pcie_setup_port(int port, int rootpoint)
+{
+	/* noting in this weak default implementation */
+}
+void board_pcie_setup_port(int port, int rootpoint)
+	__attribute__((weak, alias("__board_pcie_setup_port")));
+
+void pcie_setup_hoses(int busno)
+{
+	struct pci_controller *hose;
+	int i, bus;
+	int ret = 0;
+	char *env;
+	unsigned int delay;
+	int first = board_pcie_first();
+	int last = board_pcie_last();
+
+	/*
+	 * Assume we're called after the PCI(X) hose(s) are initialized,
+	 * which takes bus ID 0... and therefore start numbering PCIe's
+	 * from the next number.
+	 */
+	bus = busno;
+
+	for (i = first; i <= last; i++) {
+		/*
+		 * Some boards (e.g. Katmai) can detects via hardware
+		 * if a PCIe card is plugged, so let's check this.
+		 */
+		if (!board_pcie_card_present(i))
+			continue;
+
+		if (is_end_point(i)) {
+			board_pcie_setup_port(i, 0);
+			ret = ppc4xx_init_pcie_endport(i);
+		} else {
+			board_pcie_setup_port(i, 1);
+			ret = ppc4xx_init_pcie_rootport(i);
+		}
+		if (ret == -ENODEV)
+			continue;
+		if (ret) {
+			printf("PCIE%d: initialization as %s failed\n", i,
+			       is_end_point(i) ? "endpoint" : "root-complex");
+			continue;
+		}
+
+		hose = &pcie_hose[i];
+		hose->first_busno = bus;
+		hose->last_busno = bus;
+		hose->current_busno = bus;
+
+		/* setup mem resource */
+		pci_set_region(hose->regions + 0,
+			       CONFIG_SYS_PCIE_MEMBASE + i * CONFIG_SYS_PCIE_MEMSIZE,
+			       CONFIG_SYS_PCIE_MEMBASE + i * CONFIG_SYS_PCIE_MEMSIZE,
+			       CONFIG_SYS_PCIE_MEMSIZE,
+			       PCI_REGION_MEM);
+		hose->region_count = 1;
+		pci_register_hose(hose);
+
+		if (is_end_point(i)) {
+			ppc4xx_setup_pcie_endpoint(hose, i);
+			/*
+			 * Reson for no scanning is endpoint can not generate
+			 * upstream configuration accesses.
+			 */
+		} else {
+			ppc4xx_setup_pcie_rootpoint(hose, i);
+			env = getenv ("pciscandelay");
+			if (env != NULL) {
+				delay = simple_strtoul(env, NULL, 10);
+				if (delay > 5)
+					printf("Warning, expect noticable delay before "
+					       "PCIe scan due to 'pciscandelay' value!\n");
+				mdelay(delay * 1000);
+			}
+
+			/*
+			 * Config access can only go down stream
+			 */
+			hose->last_busno = pci_hose_scan(hose);
+			bus = hose->last_busno + 1;
+		}
+	}
+}
+#endif
+
 static int validate_endpoint(struct pci_controller *hose)
 {
 	if (hose->cfg_data == (u8 *)CONFIG_SYS_PCIE0_CFGBASE)
diff --git a/include/configs/yucca.h b/include/configs/yucca.h
index b165bd7..42f8807 100644
--- a/include/configs/yucca.h
+++ b/include/configs/yucca.h
@@ -389,6 +389,11 @@
 #define FPGA_REG1A_PE_SELSOURCE_0	0x0002
 #define FPGA_REG1A_PE_SELSOURCE_1	0x0001
 
+#define FPGA_REG1A_GLED_ENCODE(n)	(FPGA_REG1A_PE0_GLED >> (n))
+#define FPGA_REG1A_YLED_ENCODE(n)	(FPGA_REG1A_PE0_YLED >> (n))
+#define FPGA_REG1A_PWRON_ENCODE(n)	(FPGA_REG1A_PE0_PWRON >> (n))
+#define FPGA_REG1A_REFCLK_ENCODE(n)	(FPGA_REG1A_PE0_REFCLK_ENABLE >> (n))
+
 /*----------------------------------------------------------------------------+
 | PCIe Miscellaneous
 +----------------------------------------------------------------------------*/
@@ -407,6 +412,9 @@
 #define FPGA_REG1C_PE1_PERST		0x0008
 #define FPGA_REG1C_PE2_PERST		0x0004
 
+#define FPGA_REG1C_ROOTPOINT_ENCODE(n)	(FPGA_REG1C_PE0_ROOTPOINT >> (n))
+#define FPGA_REG1C_PERST_ENCODE(n)	(FPGA_REG1C_PE0_PERST >> (n))
+
 /*----------------------------------------------------------------------------+
 | Defines
 +----------------------------------------------------------------------------*/