Blackfin: sync ptrace headers with linux

Scrub a lot of dead cruft in the process.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>

2 files changed, 126 insertions, 233 deletions

diff --git a/include/asm-blackfin/ptrace.h b/include/asm-blackfin/ptrace.h
index f1b7d00..251d5e6 100644
--- a/include/asm-blackfin/ptrace.h
+++ b/include/asm-blackfin/ptrace.h
@@ -1,31 +1,11 @@
 /*
- * U-boot - ptrace.h
+ * Copyright 2004-2008 Analog Devices Inc.
  *
- * Copyright (c) 2005-2007 Analog Devices Inc.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- * MA 02110-1301 USA
+ * Licensed under the GPL-2 or later.
  */
 
-#ifndef _BLACKFIN_PTRACE_H
-#define _BLACKFIN_PTRACE_H
-
-#define NEW_PT_REGS
+#ifndef _BFIN_PTRACE_H
+#define _BFIN_PTRACE_H
 
 /*
  * GCC defines register number like this:
@@ -35,128 +15,30 @@
  *      16 - 31 dsp registers I/B/L0 -- I/B/L3 & M0--M3
  *      32 - 33 A registers A0 & A1
  *      34 -    status register
+ * -----------------------------
  *
  * We follows above, except:
  *      32-33 --- Low 32-bit of A0&1
  *      34-35 --- High 8-bit of A0&1
  */
 
-#if defined(NEW_PT_REGS)
-
-#define PT_IPEND	0
-#define PT_SYSCFG	(PT_IPEND+4)
-#define PT_SEQSTAT	(PT_SYSCFG+4)
-#define PT_RETE		(PT_SEQSTAT+4)
-#define PT_RETN		(PT_RETE+4)
-#define PT_RETX		(PT_RETN+4)
-#define PT_RETI		(PT_RETX+4)
-#define PT_PC		PT_RETI
-#define PT_RETS		(PT_RETI+4)
-#define PT_RESERVED	(PT_RETS+4)
-#define PT_ASTAT	(PT_RESERVED+4)
-#define PT_LB1		(PT_ASTAT+4)
-#define PT_LB0		(PT_LB1+4)
-#define PT_LT1		(PT_LB0+4)
-#define PT_LT0		(PT_LT1+4)
-#define PT_LC1		(PT_LT0+4)
-#define PT_LC0		(PT_LC1+4)
-#define PT_A1W		(PT_LC0+4)
-#define PT_A1X		(PT_A1W+4)
-#define PT_A0W		(PT_A1X+4)
-#define PT_A0X		(PT_A0W+4)
-#define PT_B3		(PT_A0X+4)
-#define PT_B2		(PT_B3+4)
-#define PT_B1		(PT_B2+4)
-#define PT_B0		(PT_B1+4)
-#define PT_L3		(PT_B0+4)
-#define PT_L2		(PT_L3+4)
-#define PT_L1		(PT_L2+4)
-#define PT_L0		(PT_L1+4)
-#define PT_M3		(PT_L0+4)
-#define PT_M2		(PT_M3+4)
-#define PT_M1		(PT_M2+4)
-#define PT_M0		(PT_M1+4)
-#define PT_I3		(PT_M0+4)
-#define PT_I2		(PT_I3+4)
-#define PT_I1		(PT_I2+4)
-#define PT_I0		(PT_I1+4)
-#define PT_USP		(PT_I0+4)
-#define PT_FP		(PT_USP+4)
-#define PT_P5		(PT_FP+4)
-#define PT_P4		(PT_P5+4)
-#define PT_P3		(PT_P4+4)
-#define PT_P2		(PT_P3+4)
-#define PT_P1		(PT_P2+4)
-#define PT_P0		(PT_P1+4)
-#define PT_R7		(PT_P0+4)
-#define PT_R6		(PT_R7+4)
-#define PT_R5		(PT_R6+4)
-#define PT_R4		(PT_R5+4)
-#define PT_R3		(PT_R4+4)
-#define PT_R2		(PT_R3+4)
-#define PT_R1		(PT_R2+4)
-#define PT_R0		(PT_R1+4)
-#define PT_ORIG_R0	(PT_R0+4)
-#define PT_SR		PT_SEQSTAT
-
-#else
-/*
- * Here utilize blackfin : dpregs = [pregs + imm16s4]
- *                     [pregs + imm16s4] = dpregs
- * to access defferent saved reg in stack
- */
-#define PT_R3		0
-#define PT_R4		4
-#define PT_R2		8
-#define PT_R1		12
-#define PT_P5		16
-#define PT_P4		20
-#define PT_P3		24
-#define PT_P2		28
-#define PT_P1		32
-#define PT_P0		36
-#define PT_R7		40
-#define PT_R6		44
-#define PT_R5		48
-#define PT_PC		52
-#define PT_SEQSTAT	56	/* so-called SR reg */
-#define PT_SR		PT_SEQSTAT
-#define PT_ASTAT	60
-#define PT_RETS		64
-#define PT_A1w		68
-#define PT_A0w		72
-#define PT_A1x		76
-#define PT_A0x		80
-#define PT_ORIG_R0	84
-#define PT_R0		88
-#define PT_USP		92
-#define PT_FP		96
-#define PT_SP		100
-
-/* Added by HuTao, May26 2003 3:18PM */
-#define PT_IPEND	100
-
-/* Add SYSCFG register for single stepping support */
-#define PT_SYSCFG	104
-
-#endif
-
 #ifndef __ASSEMBLY__
 
-#if defined(NEW_PT_REGS)
+struct task_struct;
+
 /* this struct defines the way the registers are stored on the
- * stack during a system call.
- */
+   stack during a system call. */
+
 struct pt_regs {
+	long orig_pc;
 	long ipend;
-	long syscfg;
 	long seqstat;
 	long rete;
 	long retn;
 	long retx;
-	long pc;
+	long pc;		/* PC == RETI */
 	long rets;
-	long reserved;
+	long reserved;		/* Used as scratch during system calls */
 	long astat;
 	long lb1;
 	long lb0;
@@ -201,69 +83,116 @@ struct pt_regs {
 	long r1;
 	long r0;
 	long orig_r0;
-};
-
-#else
-/* now we don't know what regs the system call will use	*/
-struct pt_regs {
-	long r3;
-	long r4;
-	long r2;
-	long r1;
-	long p5;
-	long p4;
-	long p3;
-	long p2;
-	long p1;
-	long p0;
-	long r7;
-	long r6;
-	long r5;
-	unsigned long pc;
-	unsigned long seqstat;
-	unsigned long astat;
-	unsigned long rets;
-	long a1w;
-	long a0w;
-	long a1x;
-	long a0x;
-	long orig_r0;
-	long r0;
-	long usp;
-	long fp;
-/*
- * Added for supervisor/user mode switch.
- *
- * HuTao May26 03 3:23PM
- */
-	long ipend;
+	long orig_p0;
 	long syscfg;
 };
 
-#endif
-
 /* Arbitrarily choose the same ptrace numbers as used by the Sparc code. */
-#define PTRACE_GETREGS		12
-#define PTRACE_SETREGS		13	/* ptrace signal */
+#define PTRACE_GETREGS            12
+#define PTRACE_SETREGS            13	/* ptrace signal  */
+
+#define PTRACE_GETFDPIC           31	/* get the ELF fdpic loadmap address */
+#define PTRACE_GETFDPIC_EXEC       0	/* [addr] request the executable loadmap */
+#define PTRACE_GETFDPIC_INTERP     1	/* [addr] request the interpreter loadmap */
+
+#define PS_S  (0x0002)
 
 #ifdef __KERNEL__
 
-#ifndef PS_S
-#define PS_S			(0x0c00)
+/* user_mode returns true if only one bit is set in IPEND, other than the
+   master interrupt enable.  */
+#define user_mode(regs) (!(((regs)->ipend & ~0x10) & (((regs)->ipend & ~0x10) - 1)))
+#define instruction_pointer(regs) ((regs)->pc)
+#define user_stack_pointer(regs)  ((regs)->usp)
+#define profile_pc(regs) instruction_pointer(regs)
+extern void show_regs(struct pt_regs *);
+
+#define arch_has_single_step()	(1)
+extern void user_enable_single_step(struct task_struct *);
+/* see arch/blackfin/kernel/ptrace.c about this redirect */
+#define user_disable_single_step(child) ptrace_disable(child)
 
-/* Bit 11:10 of SEQSTAT defines user/supervisor/debug mode
- *        00: user
- *        01: supervisor
- *        1x: debug
+/*
+ * Get the address of the live pt_regs for the specified task.
+ * These are saved onto the top kernel stack when the process
+ * is not running.
+ *
+ * Note: if a user thread is execve'd from kernel space, the
+ * kernel stack will not be empty on entry to the kernel, so
+ * ptracing these tasks will fail.
  */
+#define task_pt_regs(task) \
+	(struct pt_regs *) \
+	    ((unsigned long)task_stack_page(task) + \
+	     (THREAD_SIZE - sizeof(struct pt_regs)))
 
-#define PS_M			(0x1000)	/* I am not sure why this is required here Akbar */
-#endif
+#endif  /*  __KERNEL__  */
 
-#define user_mode(regs)			(!((regs)->seqstat & PS_S))
-#define instruction_pointer(regs)	((regs)->pc)
-extern void show_regs(struct pt_regs *);
+#endif				/* __ASSEMBLY__ */
+
+/*
+ * Offsets used by 'ptrace' system call interface.
+ */
 
-#endif
-#endif
-#endif
+#define PT_R0 204
+#define PT_R1 200
+#define PT_R2 196
+#define PT_R3 192
+#define PT_R4 188
+#define PT_R5 184
+#define PT_R6 180
+#define PT_R7 176
+#define PT_P0 172
+#define PT_P1 168
+#define PT_P2 164
+#define PT_P3 160
+#define PT_P4 156
+#define PT_P5 152
+#define PT_FP 148
+#define PT_USP 144
+#define PT_I0 140
+#define PT_I1 136
+#define PT_I2 132
+#define PT_I3 128
+#define PT_M0 124
+#define PT_M1 120
+#define PT_M2 116
+#define PT_M3 112
+#define PT_L0 108
+#define PT_L1 104
+#define PT_L2 100
+#define PT_L3 96
+#define PT_B0 92
+#define PT_B1 88
+#define PT_B2 84
+#define PT_B3 80
+#define PT_A0X 76
+#define PT_A0W 72
+#define PT_A1X 68
+#define PT_A1W 64
+#define PT_LC0 60
+#define PT_LC1 56
+#define PT_LT0 52
+#define PT_LT1 48
+#define PT_LB0 44
+#define PT_LB1 40
+#define PT_ASTAT 36
+#define PT_RESERVED 32
+#define PT_RETS 28
+#define PT_PC 24
+#define PT_RETX 20
+#define PT_RETN 16
+#define PT_RETE 12
+#define PT_SEQSTAT 8
+#define PT_IPEND 4
+
+#define PT_ORIG_R0 208
+#define PT_ORIG_P0 212
+#define PT_SYSCFG 216
+#define PT_TEXT_ADDR 220
+#define PT_TEXT_END_ADDR 224
+#define PT_DATA_ADDR 228
+#define PT_FDPIC_EXEC 232
+#define PT_FDPIC_INTERP 236
+
+#endif				/* _BFIN_PTRACE_H */
diff --git a/include/asm-blackfin/traps.h b/include/asm-blackfin/traps.h
index b90ceda..7422d3d 100644
--- a/include/asm-blackfin/traps.h
+++ b/include/asm-blackfin/traps.h
@@ -1,42 +1,14 @@
 /*
- * U-boot - traps.h
+ *  Copyright 2004-2009 Analog Devices Inc.
+ *                 2001 Lineo, Inc
+ *                        Tony Kou
+ *                 1993 Hamish Macdonald
  *
- * Copyright (c) 2005-2007 Analog Devices Inc.
- *
- * This file is based on
- * linux/include/asm/traps.h
- * Copyright (C) 1993        Hamish Macdonald
- * Lineo, Inc    Jul 2001    Tony Kou
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- * MA 02110-1301 USA
+ * Licensed under the GPL-2
  */
 
-/*
-  */
-
-#ifndef _BLACKFIN_TRAPS_H
-#define _BLACKFIN_TRAPS_H
-
-#ifndef __ASSEMBLY__
-typedef void (*e_vector) (void);
-extern e_vector vectors[];
-#endif
+#ifndef _BFIN_TRAPS_H
+#define _BFIN_TRAPS_H
 
 #define VEC_SYS		(0)
 #define VEC_EXCPT01	(1)
@@ -64,23 +36,15 @@ extern e_vector vectors[];
 #define VEC_CPLB_M	(38)
 #define VEC_CPLB_MHIT	(39)
 #define VEC_WATCH	(40)
-#define VEC_ISTRU_VL	(41)
+#define VEC_ISTRU_VL	(41)	/*ADSP-BF535 only (MH) */
 #define VEC_MISALI_I	(42)
 #define VEC_CPLB_I_VL	(43)
 #define VEC_CPLB_I_M	(44)
 #define VEC_CPLB_I_MHIT	(45)
 #define VEC_ILL_RES	(46)	/* including unvalid supervisor mode insn */
+/* The hardware reserves (63) for future use - we use it to tell our
+ * normal exception handling code we have a hardware error
+ */
+#define VEC_HWERR	(63)
 
-#define VECOFF(vec)	((vec)<<2)
-
-#ifndef __ASSEMBLY__
-
-/* Status register bits */
-#define PS_T  (0x8000)
-#define PS_S  (0x0c00)		/*  Supervisor mode = 0b01      */
-#define PS_D  (0x0c00)		/*  Debug mode = 0b1x           */
-#define PS_M  (0x1000)
-#define PS_C  (0x0001)
-
-#endif
-#endif
+#endif				/* _BFIN_TRAPS_H */