Merge branch 'master' of git://git.denx.de/u-boot-usb

19 files changed, 1415 insertions, 15 deletions

diff --git a/board/davinci/da830evm/da830evm.c b/board/davinci/da830evm/da830evm.c
index bb8cc3c..7cf6013 100644
--- a/board/davinci/da830evm/da830evm.c
+++ b/board/davinci/da830evm/da830evm.c
@@ -65,6 +65,11 @@ const struct pinmux_config i2c_pins[] = {
 	{ pinmux[9], 2, 4 }
 };
 
+/* USB0_DRVVBUS pin muxer settings */
+const struct pinmux_config usb_pins[] = {
+	{ pinmux[9], 1, 1 }
+};
+
 int board_init(void)
 {
 #ifndef CONFIG_USE_IRQ
@@ -118,6 +123,9 @@ int board_init(void)
 	if (davinci_configure_pin_mux(i2c_pins, ARRAY_SIZE(i2c_pins)) != 0)
 		return 1;
 
+	if (davinci_configure_pin_mux(usb_pins, ARRAY_SIZE(usb_pins)) != 0)
+		return 1;
+
 	/* enable the console UART */
 	writel((DAVINCI_UART_PWREMU_MGMT_FREE | DAVINCI_UART_PWREMU_MGMT_URRST |
 		DAVINCI_UART_PWREMU_MGMT_UTRST),
diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile
index 940d4a8..255679a 100644
--- a/drivers/usb/host/Makefile
+++ b/drivers/usb/host/Makefile
@@ -36,6 +36,7 @@ COBJS-$(CONFIG_USB_SL811HS) += sl811-hcd.o
 # echi
 COBJS-$(CONFIG_USB_EHCI) += ehci-hcd.o
 COBJS-$(CONFIG_USB_EHCI_FSL) += ehci-fsl.o
+COBJS-$(CONFIG_USB_EHCI_PPC4XX) += ehci-ppc4xx.o
 COBJS-$(CONFIG_USB_EHCI_IXP4XX) += ehci-ixp.o
 COBJS-$(CONFIG_USB_EHCI_KIRKWOOD) += ehci-kirkwood.o
 COBJS-$(CONFIG_USB_EHCI_PCI) += ehci-pci.o
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index ba85991..9ebeb4f 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -708,6 +708,9 @@ ehci_submit_root(struct usb_device *dev, unsigned long pipe, void *buffer,
 				 * root
 				 */
 				wait_ms(50);
+				/* terminate the reset */
+				ehci_writel(status_reg, reg & ~EHCI_PS_PR);
+				wait_ms(2);
 				portreset |= 1 << le16_to_cpu(req->index);
 			}
 			break;
diff --git a/drivers/usb/host/ehci-ppc4xx.c b/drivers/usb/host/ehci-ppc4xx.c
new file mode 100644
index 0000000..946a0a0
--- /dev/null
+++ b/drivers/usb/host/ehci-ppc4xx.c
@@ -0,0 +1,48 @@
+/*
+ * (C) Copyright 2010, Chris Zhang <chris@seamicro.com>
+ *
+ * Author: Chris Zhang <chris@seamicro.com>
+ * This code is based on ehci freescale driver
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#include <common.h>
+#include <usb.h>
+
+#include "ehci.h"
+#include "ehci-core.h"
+
+/*
+ * Create the appropriate control structures to manage
+ * a new EHCI host controller.
+ */
+int ehci_hcd_init(void)
+{
+	hccr = (struct ehci_hccr *)(CONFIG_SYS_PPC4XX_USB_ADDR);
+	hcor = (struct ehci_hcor *)((uint32_t) hccr +
+		HC_LENGTH(ehci_readl(&hccr->cr_capbase)));
+	usb_dev_init();
+	return 0;
+}
+
+/*
+ * Destroy the appropriate control structures corresponding
+ * the the EHCI host controller.
+ */
+int ehci_hcd_stop(void)
+{
+	return 0;
+}
diff --git a/drivers/usb/musb/Makefile b/drivers/usb/musb/Makefile
index f2ccd9f..397f5fe 100644
--- a/drivers/usb/musb/Makefile
+++ b/drivers/usb/musb/Makefile
@@ -27,8 +27,10 @@ LIB	:= $(obj)libusb_musb.a
 
 COBJS-$(CONFIG_MUSB_HCD) += musb_hcd.o musb_core.o
 COBJS-$(CONFIG_MUSB_UDC) += musb_udc.o musb_core.o
+COBJS-$(CONFIG_USB_BLACKFIN) += blackfin_usb.o
 COBJS-$(CONFIG_USB_DAVINCI) += davinci.o
 COBJS-$(CONFIG_USB_OMAP3) += omap3.o
+COBJS-$(CONFIG_USB_DA8XX) += da8xx.o
 
 COBJS	:= $(COBJS-y)
 SRCS	:= $(COBJS:.o=.c)
diff --git a/drivers/usb/musb/blackfin_usb.c b/drivers/usb/musb/blackfin_usb.c
new file mode 100644
index 0000000..38aceb2
--- /dev/null
+++ b/drivers/usb/musb/blackfin_usb.c
@@ -0,0 +1,143 @@
+/*
+ * Blackfin MUSB HCD (Host Controller Driver) for u-boot
+ *
+ * Copyright (c) 2008-2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <common.h>
+
+#include <usb.h>
+
+#include <asm/blackfin.h>
+#include <asm/mach-common/bits/usb.h>
+
+#include "musb_core.h"
+
+/* MUSB platform configuration */
+struct musb_config musb_cfg = {
+	.regs       = (struct musb_regs *)USB_FADDR,
+	.timeout    = 0x3FFFFFF,
+	.musb_speed = 0,
+};
+
+/*
+ * This function read or write data to endpoint fifo
+ * Blackfin use DMA polling method to avoid buffer alignment issues
+ *
+ * ep		- Endpoint number
+ * length	- Number of bytes to write to FIFO
+ * fifo_data	- Pointer to data buffer to be read/write
+ * is_write	- Flag for read or write
+ */
+void rw_fifo(u8 ep, u32 length, void *fifo_data, int is_write)
+{
+	struct bfin_musb_dma_regs *regs;
+	u32 val = (u32)fifo_data;
+
+	blackfin_dcache_flush_invalidate_range(fifo_data, fifo_data + length);
+
+	regs = (void *)USB_DMA_INTERRUPT;
+	regs += ep;
+
+	/* Setup DMA address register */
+	bfin_write16(&regs->addr_low, val);
+	SSYNC();
+
+	bfin_write16(&regs->addr_high, val >> 16);
+	SSYNC();
+
+	/* Setup DMA count register */
+	bfin_write16(&regs->count_low, length);
+	bfin_write16(&regs->count_high, 0);
+	SSYNC();
+
+	/* Enable the DMA */
+	val = (ep << 4) | DMA_ENA | INT_ENA;
+	if (is_write)
+		val |= DIRECTION;
+	bfin_write16(&regs->control, val);
+	SSYNC();
+
+	/* Wait for compelete */
+	while (!(bfin_read_USB_DMA_INTERRUPT() & (1 << ep)))
+		continue;
+
+	/* acknowledge dma interrupt */
+	bfin_write_USB_DMA_INTERRUPT(1 << ep);
+	SSYNC();
+
+	/* Reset DMA */
+	bfin_write16(&regs->control, 0);
+	SSYNC();
+}
+
+void write_fifo(u8 ep, u32 length, void *fifo_data)
+{
+	rw_fifo(ep, length, fifo_data, 1);
+}
+
+void read_fifo(u8 ep, u32 length, void *fifo_data)
+{
+	rw_fifo(ep, length, fifo_data, 0);
+}
+
+
+/*
+ * CPU and board-specific MUSB initializations.  Aliased function
+ * signals caller to move on.
+ */
+static void __def_musb_init(void)
+{
+}
+void board_musb_init(void) __attribute__((weak, alias("__def_musb_init")));
+
+int musb_platform_init(void)
+{
+	/* board specific initialization */
+	board_musb_init();
+
+	if (ANOMALY_05000346) {
+		bfin_write_USB_APHY_CALIB(ANOMALY_05000346_value);
+		SSYNC();
+	}
+
+	if (ANOMALY_05000347) {
+		bfin_write_USB_APHY_CNTRL(0x0);
+		SSYNC();
+	}
+
+	/* Configure PLL oscillator register */
+	bfin_write_USB_PLLOSC_CTRL(0x30a8);
+	SSYNC();
+
+	bfin_write_USB_SRP_CLKDIV((get_sclk()/1000) / 32 - 1);
+	SSYNC();
+
+	bfin_write_USB_EP_NI0_RXMAXP(64);
+	SSYNC();
+
+	bfin_write_USB_EP_NI0_TXMAXP(64);
+	SSYNC();
+
+	/* Route INTRUSB/INTR_RX/INTR_TX to USB_INT0*/
+	bfin_write_USB_GLOBINTR(0x7);
+	SSYNC();
+
+	bfin_write_USB_GLOBAL_CTL(GLOBAL_ENA | EP1_TX_ENA | EP2_TX_ENA |
+				EP3_TX_ENA | EP4_TX_ENA | EP5_TX_ENA |
+				EP6_TX_ENA | EP7_TX_ENA | EP1_RX_ENA |
+				EP2_RX_ENA | EP3_RX_ENA | EP4_RX_ENA |
+				EP5_RX_ENA | EP6_RX_ENA | EP7_RX_ENA);
+	SSYNC();
+
+	return 0;
+}
+
+/*
+ * This function performs Blackfin platform specific deinitialization for usb.
+*/
+void musb_platform_deinit(void)
+{
+}
diff --git a/drivers/usb/musb/blackfin_usb.h b/drivers/usb/musb/blackfin_usb.h
new file mode 100644
index 0000000..ab26ca2
--- /dev/null
+++ b/drivers/usb/musb/blackfin_usb.h
@@ -0,0 +1,99 @@
+/*
+ * Blackfin MUSB HCD (Host Controller Driver) for u-boot
+ *
+ * Copyright (c) 2008-2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef __BLACKFIN_USB_H__
+#define __BLACKFIN_USB_H__
+
+#include <linux/types.h>
+
+/* Every register is 32bit aligned, but only 16bits in size */
+#define ureg(name) u16 name; u16 __pad_##name;
+
+#define musb_regs musb_regs
+struct musb_regs {
+	/* common registers */
+	ureg(faddr)
+	ureg(power)
+	ureg(intrtx)
+	ureg(intrrx)
+	ureg(intrtxe)
+	ureg(intrrxe)
+	ureg(intrusb)
+	ureg(intrusbe)
+	ureg(frame)
+	ureg(index)
+	ureg(testmode)
+	ureg(globintr)
+	ureg(global_ctl)
+	u32	reserved0[3];
+	/* indexed registers */
+	ureg(txmaxp)
+	ureg(txcsr)
+	ureg(rxmaxp)
+	ureg(rxcsr)
+	ureg(rxcount)
+	ureg(txtype)
+	ureg(txinterval)
+	ureg(rxtype)
+	ureg(rxinterval)
+	u32	reserved1;
+	ureg(txcount)
+	u32	reserved2[5];
+	/* fifo */
+	u16	fifox[32];
+	/* OTG, dynamic FIFO, version & vendor registers */
+	u32	reserved3[16];
+	ureg(devctl)
+	ureg(vbus_irq)
+	ureg(vbus_mask)
+	u32 reserved4[15];
+	ureg(linkinfo)
+	ureg(vplen)
+	ureg(hseof1)
+	ureg(fseof1)
+	ureg(lseof1)
+	u32 reserved5[41];
+	/* target address registers */
+	struct musb_tar_regs {
+		ureg(txmaxp)
+		ureg(txcsr)
+		ureg(rxmaxp)
+		ureg(rxcsr)
+		ureg(rxcount)
+		ureg(txtype)
+		ureg(txinternal)
+		ureg(rxtype)
+		ureg(rxinternal)
+		u32	reserved6;
+		ureg(txcount)
+		u32 reserved7[5];
+	} tar[8];
+} __attribute__((packed));
+
+struct bfin_musb_dma_regs {
+	ureg(interrupt);
+	ureg(control);
+	ureg(addr_low);
+	ureg(addr_high);
+	ureg(count_low);
+	ureg(count_high);
+	ureg(pad);
+};
+
+#undef ureg
+
+/* EP5-EP7 are the only ones with 1024 byte FIFOs which BULK really needs */
+#define MUSB_BULK_EP 5
+
+/* Blackfin FIFO's are static */
+#define MUSB_NO_DYNAMIC_FIFO
+
+/* No HUB support :( */
+#define MUSB_NO_MULTIPOINT
+
+#endif
diff --git a/drivers/usb/musb/da8xx.c b/drivers/usb/musb/da8xx.c
new file mode 100644
index 0000000..40bfe44
--- /dev/null
+++ b/drivers/usb/musb/da8xx.c
@@ -0,0 +1,139 @@
+/*
+ * da8xx.c - TI's DA8xx platform specific usb wrapper functions.
+ *
+ * Author: Ajay Kumar Gupta <ajay.gupta@ti.com>
+ *
+ * Based on drivers/usb/musb/davinci.c
+ *
+ * Copyright (C) 2009 Texas Instruments Incorporated
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#include <common.h>
+
+#include "da8xx.h"
+
+/* MUSB platform configuration */
+struct musb_config musb_cfg = {
+	(struct	musb_regs *)DA8XX_USB_OTG_CORE_BASE,
+	DA8XX_USB_OTG_TIMEOUT,
+	0
+};
+
+/*
+ * This function enables VBUS by driving the GPIO Bank4 Pin 15 high.
+ */
+static void enable_vbus(void)
+{
+	u32 value;
+
+	/* configure GPIO bank4 pin 15 in output direction */
+	value = readl(&davinci_gpio_bank45->dir);
+	writel((value & (~DA8XX_USB_VBUS_GPIO)), &davinci_gpio_bank45->dir);
+
+	/* set GPIO bank4 pin 15 high to drive VBUS */
+	value = readl(&davinci_gpio_bank45->set_data);
+	writel((value | DA8XX_USB_VBUS_GPIO), &davinci_gpio_bank45->set_data);
+}
+
+/*
+ * Enable the usb0 phy. This initialization procedure is explained in
+ * the DA8xx USB user guide document.
+ */
+static u8 phy_on(void)
+{
+	u32 timeout;
+	u32 cfgchip2;
+
+	cfgchip2 = readl(&davinci_syscfg_regs->cfgchip2);
+
+	cfgchip2 &= ~(CFGCHIP2_RESET | CFGCHIP2_PHYPWRDN | CFGCHIP2_OTGPWRDN |
+		      CFGCHIP2_OTGMODE | CFGCHIP2_REFFREQ);
+	cfgchip2 |= CFGCHIP2_SESENDEN | CFGCHIP2_VBDTCTEN | CFGCHIP2_PHY_PLLON |
+		    CFGCHIP2_REFFREQ_24MHZ;
+
+	writel(cfgchip2, &davinci_syscfg_regs->cfgchip2);
+
+	/* wait until the usb phy pll locks */
+	timeout = musb_cfg.timeout;
+	while (timeout--)
+		if (readl(&davinci_syscfg_regs->cfgchip2) & CFGCHIP2_PHYCLKGD)
+			return 1;
+
+	/* USB phy was not turned on */
+	return 0;
+}
+
+/*
+ * Disable the usb phy
+ */
+static void phy_off(void)
+{
+	u32 cfgchip2;
+
+	/*
+	 * Power down the on-chip PHY.
+	 */
+	cfgchip2 = readl(&davinci_syscfg_regs->cfgchip2);
+	cfgchip2 &= ~CFGCHIP2_PHY_PLLON;
+	cfgchip2 |= CFGCHIP2_PHYPWRDN | CFGCHIP2_OTGPWRDN;
+	writel(cfgchip2, &davinci_syscfg_regs->cfgchip2);
+}
+
+/*
+ * This function performs DA8xx platform specific initialization for usb0.
+ */
+int musb_platform_init(void)
+{
+	u32  revision;
+
+	/* enable psc for usb2.0 */
+	lpsc_on(33);
+
+	/* enable usb vbus */
+	enable_vbus();
+
+	/* reset the controller */
+	writel(0x1, &da8xx_usb_regs->control);
+	udelay(5000);
+
+	/* start the on-chip usb phy and its pll */
+	if (phy_on() == 0)
+		return -1;
+
+	/* Returns zero if e.g. not clocked */
+	revision = readl(&da8xx_usb_regs->revision);
+	if (revision == 0)
+		return -1;
+
+	/* Disable all interrupts */
+	writel((DA8XX_USB_USBINT_MASK | DA8XX_USB_TXINT_MASK |
+		DA8XX_USB_RXINT_MASK), &da8xx_usb_regs->intmsk_set);
+	return 0;
+}
+
+/*
+ * This function performs DA8xx platform specific deinitialization for usb0.
+ */
+void musb_platform_deinit(void)
+{
+	/* Turn of the phy */
+	phy_off();
+
+	/* flush any interrupts */
+	writel((DA8XX_USB_USBINT_MASK | DA8XX_USB_TXINT_MASK |
+		DA8XX_USB_RXINT_MASK), &da8xx_usb_regs->intmsk_clr);
+	writel(0, &da8xx_usb_regs->eoi);
+}
diff --git a/drivers/usb/musb/da8xx.h b/drivers/usb/musb/da8xx.h
new file mode 100644
index 0000000..93234f0
--- /dev/null
+++ b/drivers/usb/musb/da8xx.h
@@ -0,0 +1,103 @@
+/*
+ * da8xx.h -- TI's DA8xx platform specific usb wrapper definitions.
+ *
+ * Author: Ajay Kumar Gupta <ajay.gupta@ti.com>
+ *
+ * Based on drivers/usb/musb/davinci.h
+ *
+ * Copyright (C) 2009 Texas Instruments Incorporated
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#ifndef __DA8XX_MUSB_H__
+#define __DA8XX_MUSB_H__
+
+#include <asm/arch/hardware.h>
+#include <asm/arch/gpio_defs.h>
+#include "musb_core.h"
+
+/* Base address of da8xx usb0 wrapper */
+#define DA8XX_USB_OTG_BASE  0x01E00000
+
+/* Base address of da8xx musb core */
+#define DA8XX_USB_OTG_CORE_BASE (DA8XX_USB_OTG_BASE + 0x400)
+
+/* Timeout for DA8xx usb module */
+#define DA8XX_USB_OTG_TIMEOUT 0x3FFFFFF
+
+/*
+ * DA8xx platform USB wrapper register overlay.
+ */
+struct da8xx_usb_regs {
+	dv_reg	revision;
+	dv_reg	control;
+	dv_reg 	status;
+	dv_reg 	emulation;
+	dv_reg 	mode;
+	dv_reg 	autoreq;
+	dv_reg 	srpfixtime;
+	dv_reg 	teardown;
+	dv_reg 	intsrc;
+	dv_reg 	intsrc_set;
+	dv_reg 	intsrc_clr;
+	dv_reg 	intmsk;
+	dv_reg 	intmsk_set;
+	dv_reg 	intmsk_clr;
+	dv_reg 	intsrcmsk;
+	dv_reg 	eoi;
+	dv_reg 	intvector;
+	dv_reg 	grndis_size[4];
+};
+
+#define da8xx_usb_regs ((struct da8xx_usb_regs *)DA8XX_USB_OTG_BASE)
+
+/* DA8XX interrupt bits definitions */
+#define DA8XX_USB_TX_ENDPTS_MASK  0x1f	/* ep0 + 4 tx */
+#define DA8XX_USB_RX_ENDPTS_MASK  0x1e	/* 4 rx */
+#define DA8XX_USB_TXINT_SHIFT	  0
+#define DA8XX_USB_RXINT_SHIFT	  8
+
+#define DA8XX_USB_USBINT_MASK	  0x01ff0000	/* 8 Mentor, DRVVBUS */
+#define DA8XX_USB_TXINT_MASK \
+		(DA8XX_USB_TX_ENDPTS_MASK << DA8XX_USB_TXINT_SHIFT)
+#define DA8XX_USB_RXINT_MASK \
+		(DA8XX_USB_RX_ENDPTS_MASK << DA8XX_USB_RXINT_SHIFT)
+
+/* DA8xx CFGCHIP2 (USB 2.0 PHY Control) register bits */
+#define CFGCHIP2_PHYCLKGD	(1 << 17)
+#define CFGCHIP2_VBUSSENSE	(1 << 16)
+#define CFGCHIP2_RESET		(1 << 15)
+#define CFGCHIP2_OTGMODE	(3 << 13)
+#define CFGCHIP2_NO_OVERRIDE	(0 << 13)
+#define CFGCHIP2_FORCE_HOST	(1 << 13)
+#define CFGCHIP2_FORCE_DEVICE 	(2 << 13)
+#define CFGCHIP2_FORCE_HOST_VBUS_LOW (3 << 13)
+#define CFGCHIP2_USB1PHYCLKMUX	(1 << 12)
+#define CFGCHIP2_USB2PHYCLKMUX	(1 << 11)
+#define CFGCHIP2_PHYPWRDN	(1 << 10)
+#define CFGCHIP2_OTGPWRDN	(1 << 9)
+#define CFGCHIP2_DATPOL 	(1 << 8)
+#define CFGCHIP2_USB1SUSPENDM	(1 << 7)
+#define CFGCHIP2_PHY_PLLON	(1 << 6)	/* override PLL suspend */
+#define CFGCHIP2_SESENDEN	(1 << 5)	/* Vsess_end comparator */
+#define CFGCHIP2_VBDTCTEN	(1 << 4)	/* Vbus comparator */
+#define CFGCHIP2_REFFREQ	(0xf << 0)
+#define CFGCHIP2_REFFREQ_12MHZ	(1 << 0)
+#define CFGCHIP2_REFFREQ_24MHZ	(2 << 0)
+#define CFGCHIP2_REFFREQ_48MHZ	(3 << 0)
+
+#define DA8XX_USB_VBUS_GPIO	(1 << 15)
+#endif	/* __DA8XX_MUSB_H__ */
+
diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index 22f3dba..7766069 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -50,6 +50,16 @@ void musb_start(void)
 #endif
 }
 
+#ifdef MUSB_NO_DYNAMIC_FIFO
+# define config_fifo(dir, idx, addr)
+#else
+# define config_fifo(dir, idx, addr) \
+	do { \
+		writeb(idx, &musbr->dir##fifosz); \
+		writew(fifoaddr >> 3, &musbr->dir##fifoadd); \
+	} while (0)
+#endif
+
 /*
  * This function configures the endpoint configuration. The musb hcd or musb
  * device implementation can use this function to configure the endpoints
@@ -74,8 +84,7 @@ void musb_configure_ep(struct musb_epinfo *epinfo, u8 cnt)
 		writeb(epinfo->epnum, &musbr->index);
 		if (epinfo->epdir) {
 			/* Configure fifo size and fifo base address */
-			writeb(idx, &musbr->txfifosz);
-			writew(fifoaddr >> 3, &musbr->txfifoadd);
+			config_fifo(tx, idx, fifoaddr);
 
 			csr = readw(&musbr->txcsr);
 #if defined(CONFIG_MUSB_HCD)
@@ -88,8 +97,7 @@ void musb_configure_ep(struct musb_epinfo *epinfo, u8 cnt)
 					&musbr->txcsr);
 		} else {
 			/* Configure fifo size and fifo base address */
-			writeb(idx, &musbr->rxfifosz);
-			writew(fifoaddr >> 3, &musbr->rxfifoadd);
+			config_fifo(rx, idx, fifoaddr);
 
 			csr = readw(&musbr->rxcsr);
 #if defined(CONFIG_MUSB_HCD)
@@ -113,6 +121,7 @@ void musb_configure_ep(struct musb_epinfo *epinfo, u8 cnt)
  * length	- number of bytes to write to FIFO
  * fifo_data	- Pointer to data buffer that contains the data to write
  */
+__attribute__((weak))
 void write_fifo(u8 ep, u32 length, void *fifo_data)
 {
 	u8  *data = (u8 *)fifo_data;
@@ -132,6 +141,7 @@ void write_fifo(u8 ep, u32 length, void *fifo_data)
  * length       - number of bytes to read from FIFO
  * fifo_data    - pointer to data buffer into which data is read
  */
+__attribute__((weak))
 void read_fifo(u8 ep, u32 length, void *fifo_data)
 {
 	u8  *data = (u8 *)fifo_data;
diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h
index 15c7f49..f0f0301 100644
--- a/drivers/usb/musb/musb_core.h
+++ b/drivers/usb/musb/musb_core.h
@@ -38,6 +38,10 @@
 #include <usb_defs.h>
 #include <asm/io.h>
 
+#ifdef CONFIG_USB_BLACKFIN
+# include "blackfin_usb.h"
+#endif
+
 #define MUSB_EP0_FIFOSIZE	64	/* This is non-configurable */
 
 /* EP0 */
@@ -71,6 +75,7 @@ struct musb_epN_regs {
 };
 
 /* Mentor USB core register overlay structure */
+#ifndef musb_regs
 struct musb_regs {
 	/* common registers */
 	u8	faddr;
@@ -137,7 +142,8 @@ struct musb_regs {
 		struct musb_epN_regs epN;
 	} ep[16];
 
-} __attribute__((aligned(32)));
+} __attribute__((packed, aligned(32)));
+#endif
 
 /*
  * MUSB Register bits
@@ -347,4 +353,14 @@ extern void musb_configure_ep(struct musb_epinfo *epinfo, u8 cnt);
 extern void write_fifo(u8 ep, u32 length, void *fifo_data);
 extern void read_fifo(u8 ep, u32 length, void *fifo_data);
 
+#if defined(CONFIG_USB_BLACKFIN)
+/* Every USB register is accessed as a 16-bit even if the value itself
+ * is only 8-bits in size.  Fun stuff.
+ */
+# undef  readb
+# define readb(addr)     (u8)bfin_read16(addr)
+# undef  writeb
+# define writeb(b, addr) bfin_write16(addr, b)
+#endif
+
 #endif	/* __MUSB_HDRC_DEFS_H__ */
diff --git a/drivers/usb/musb/musb_hcd.c b/drivers/usb/musb/musb_hcd.c
index 555d2dc..dd2aa7f 100644
--- a/drivers/usb/musb/musb_hcd.c
+++ b/drivers/usb/musb/musb_hcd.c
@@ -35,6 +35,106 @@ static struct musb_epinfo epinfo[3] = {
 	{MUSB_INTR_EP, 0, 64}   /* EP2 - Interrupt IN - 64 Bytes */
 };
 
+/* --- Virtual Root Hub ---------------------------------------------------- */
+#ifdef MUSB_NO_MULTIPOINT
+static int rh_devnum;
+static u32 port_status;
+
+/* Device descriptor */
+static u8 root_hub_dev_des[] = {
+	0x12,			/*  __u8  bLength; */
+	0x01,			/*  __u8  bDescriptorType; Device */
+	0x00,			/*  __u16 bcdUSB; v1.1 */
+	0x02,
+	0x09,			/*  __u8  bDeviceClass; HUB_CLASSCODE */
+	0x00,			/*  __u8  bDeviceSubClass; */
+	0x00,			/*  __u8  bDeviceProtocol; */
+	0x08,			/*  __u8  bMaxPacketSize0; 8 Bytes */
+	0x00,			/*  __u16 idVendor; */
+	0x00,
+	0x00,			/*  __u16 idProduct; */
+	0x00,
+	0x00,			/*  __u16 bcdDevice; */
+	0x00,
+	0x00,			/*  __u8  iManufacturer; */
+	0x01,			/*  __u8  iProduct; */
+	0x00,			/*  __u8  iSerialNumber; */
+	0x01			/*  __u8  bNumConfigurations; */
+};
+
+/* Configuration descriptor */
+static u8 root_hub_config_des[] = {
+	0x09,			/*  __u8  bLength; */
+	0x02,			/*  __u8  bDescriptorType; Configuration */
+	0x19,			/*  __u16 wTotalLength; */
+	0x00,
+	0x01,			/*  __u8  bNumInterfaces; */
+	0x01,			/*  __u8  bConfigurationValue; */
+	0x00,			/*  __u8  iConfiguration; */
+	0x40,			/*  __u8  bmAttributes;
+				   Bit 7: Bus-powered, 6: Self-powered, 5 Remote-wakwup, 4..0: resvd */
+	0x00,			/*  __u8  MaxPower; */
+
+	/* interface */
+	0x09,			/*  __u8  if_bLength; */
+	0x04,			/*  __u8  if_bDescriptorType; Interface */
+	0x00,			/*  __u8  if_bInterfaceNumber; */
+	0x00,			/*  __u8  if_bAlternateSetting; */
+	0x01,			/*  __u8  if_bNumEndpoints; */
+	0x09,			/*  __u8  if_bInterfaceClass; HUB_CLASSCODE */
+	0x00,			/*  __u8  if_bInterfaceSubClass; */
+	0x00,			/*  __u8  if_bInterfaceProtocol; */
+	0x00,			/*  __u8  if_iInterface; */
+
+	/* endpoint */
+	0x07,			/*  __u8  ep_bLength; */
+	0x05,			/*  __u8  ep_bDescriptorType; Endpoint */
+	0x81,			/*  __u8  ep_bEndpointAddress; IN Endpoint 1 */
+	0x03,			/*  __u8  ep_bmAttributes; Interrupt */
+	0x00,			/*  __u16 ep_wMaxPacketSize; ((MAX_ROOT_PORTS + 1) / 8 */
+	0x02,
+	0xff			/*  __u8  ep_bInterval; 255 ms */
+};
+
+static unsigned char root_hub_str_index0[] = {
+	0x04,			/*  __u8  bLength; */
+	0x03,			/*  __u8  bDescriptorType; String-descriptor */
+	0x09,			/*  __u8  lang ID */
+	0x04,			/*  __u8  lang ID */
+};
+
+static unsigned char root_hub_str_index1[] = {
+	0x1c,			/*  __u8  bLength; */
+	0x03,			/*  __u8  bDescriptorType; String-descriptor */
+	'M',			/*  __u8  Unicode */
+	0,			/*  __u8  Unicode */
+	'U',			/*  __u8  Unicode */
+	0,			/*  __u8  Unicode */
+	'S',			/*  __u8  Unicode */
+	0,			/*  __u8  Unicode */
+	'B',			/*  __u8  Unicode */
+	0,			/*  __u8  Unicode */
+	' ',			/*  __u8  Unicode */
+	0,			/*  __u8  Unicode */
+	'R',			/*  __u8  Unicode */
+	0,			/*  __u8  Unicode */
+	'o',			/*  __u8  Unicode */
+	0,			/*  __u8  Unicode */
+	'o',			/*  __u8  Unicode */
+	0,			/*  __u8  Unicode */
+	't',			/*  __u8  Unicode */
+	0,			/*  __u8  Unicode */
+	' ',			/*  __u8  Unicode */
+	0,			/*  __u8  Unicode */
+	'H',			/*  __u8  Unicode */
+	0,			/*  __u8  Unicode */
+	'u',			/*  __u8  Unicode */
+	0,			/*  __u8  Unicode */
+	'b',			/*  __u8  Unicode */
+	0,			/*  __u8  Unicode */
+};
+#endif
+
 /*
  * This function writes the data toggle value.
  */
@@ -402,14 +502,335 @@ static void config_hub_port(struct usb_device *dev, u8 ep)
 		if (dev->parent->children[chid] == dev)
 			break;
 
+#ifndef MUSB_NO_MULTIPOINT
 	/* configure the hub address and the port address */
 	writeb(hub, &musbr->tar[ep].txhubaddr);
 	writeb((chid + 1), &musbr->tar[ep].txhubport);
 	writeb(hub, &musbr->tar[ep].rxhubaddr);
 	writeb((chid + 1), &musbr->tar[ep].rxhubport);
+#endif
+}
+
+#ifdef MUSB_NO_MULTIPOINT
+
+static void musb_port_reset(int do_reset)
+{
+	u8 power = readb(&musbr->power);
+
+	if (do_reset) {
+		power &= 0xf0;
+		writeb(power | MUSB_POWER_RESET, &musbr->power);
+		port_status |= USB_PORT_STAT_RESET;
+		port_status &= ~USB_PORT_STAT_ENABLE;
+		udelay(30000);
+	} else {
+		writeb(power & ~MUSB_POWER_RESET, &musbr->power);
+
+		power = readb(&musbr->power);
+		if (power & MUSB_POWER_HSMODE)
+			port_status |= USB_PORT_STAT_HIGH_SPEED;
+
+		port_status &= ~(USB_PORT_STAT_RESET | (USB_PORT_STAT_C_CONNECTION << 16));
+		port_status |= USB_PORT_STAT_ENABLE
+			| (USB_PORT_STAT_C_RESET << 16)
+			| (USB_PORT_STAT_C_ENABLE << 16);
+	}
 }
 
 /*
+ * root hub control
+ */
+static int musb_submit_rh_msg(struct usb_device *dev, unsigned long pipe,
+			      void *buffer, int transfer_len,
+			      struct devrequest *cmd)
+{
+	int leni = transfer_len;
+	int len = 0;
+	int stat = 0;
+	u32 datab[4];
+	u8 *data_buf = (u8 *) datab;
+	u16 bmRType_bReq;
+	u16 wValue;
+	u16 wIndex;
+	u16 wLength;
+	u16 int_usb;
+
+	if ((pipe & PIPE_INTERRUPT) == PIPE_INTERRUPT) {
+		debug("Root-Hub submit IRQ: NOT implemented\n");
+		return 0;
+	}
+
+	bmRType_bReq = cmd->requesttype | (cmd->request << 8);
+	wValue = swap_16(cmd->value);
+	wIndex = swap_16(cmd->index);
+	wLength = swap_16(cmd->length);
+
+	debug("--- HUB ----------------------------------------\n");
+	debug("submit rh urb, req=%x val=%#x index=%#x len=%d\n",
+	    bmRType_bReq, wValue, wIndex, wLength);
+	debug("------------------------------------------------\n");
+
+	switch (bmRType_bReq) {
+	case RH_GET_STATUS:
+		debug("RH_GET_STATUS\n");
+
+		*(__u16 *) data_buf = swap_16(1);
+		len = 2;
+		break;
+
+	case RH_GET_STATUS | RH_INTERFACE:
+		debug("RH_GET_STATUS | RH_INTERFACE\n");
+
+		*(__u16 *) data_buf = swap_16(0);
+		len = 2;
+		break;
+
+	case RH_GET_STATUS | RH_ENDPOINT:
+		debug("RH_GET_STATUS | RH_ENDPOINT\n");
+
+		*(__u16 *) data_buf = swap_16(0);
+		len = 2;
+		break;
+
+	case RH_GET_STATUS | RH_CLASS:
+		debug("RH_GET_STATUS | RH_CLASS\n");
+
+		*(__u32 *) data_buf = swap_32(0);
+		len = 4;
+		break;
+
+	case RH_GET_STATUS | RH_OTHER | RH_CLASS:
+		debug("RH_GET_STATUS | RH_OTHER | RH_CLASS\n");
+
+		int_usb = readw(&musbr->intrusb);
+		if (int_usb & MUSB_INTR_CONNECT) {
+			port_status |= USB_PORT_STAT_CONNECTION
+				| (USB_PORT_STAT_C_CONNECTION << 16);
+			port_status |= USB_PORT_STAT_HIGH_SPEED
+				| USB_PORT_STAT_ENABLE;
+		}
+
+		if (port_status & USB_PORT_STAT_RESET)
+			musb_port_reset(0);
+
+		*(__u32 *) data_buf = swap_32(port_status);
+		len = 4;
+		break;
+
+	case RH_CLEAR_FEATURE | RH_ENDPOINT:
+		debug("RH_CLEAR_FEATURE | RH_ENDPOINT\n");
+
+		switch (wValue) {
+		case RH_ENDPOINT_STALL:
+			debug("C_HUB_ENDPOINT_STALL\n");
+			len = 0;
+			break;
+		}
+		port_status &= ~(1 << wValue);
+		break;
+
+	case RH_CLEAR_FEATURE | RH_CLASS:
+		debug("RH_CLEAR_FEATURE | RH_CLASS\n");
+
+		switch (wValue) {
+		case RH_C_HUB_LOCAL_POWER:
+			debug("C_HUB_LOCAL_POWER\n");
+			len = 0;
+			break;
+
+		case RH_C_HUB_OVER_CURRENT:
+			debug("C_HUB_OVER_CURRENT\n");
+			len = 0;
+			break;
+		}
+		port_status &= ~(1 << wValue);
+		break;
+
+	case RH_CLEAR_FEATURE | RH_OTHER | RH_CLASS:
+		debug("RH_CLEAR_FEATURE | RH_OTHER | RH_CLASS\n");
+
+		switch (wValue) {
+		case RH_PORT_ENABLE:
+			len = 0;
+			break;
+
+		case RH_PORT_SUSPEND:
+			len = 0;
+			break;
+
+		case RH_PORT_POWER:
+			len = 0;
+			break;
+
+		case RH_C_PORT_CONNECTION:
+			len = 0;
+			break;
+
+		case RH_C_PORT_ENABLE:
+			len = 0;
+			break;
+
+		case RH_C_PORT_SUSPEND:
+			len = 0;
+			break;
+
+		case RH_C_PORT_OVER_CURRENT:
+			len = 0;
+			break;
+
+		case RH_C_PORT_RESET:
+			len = 0;
+			break;
+
+		default:
+			debug("invalid wValue\n");
+			stat = USB_ST_STALLED;
+		}
+
+		port_status &= ~(1 << wValue);
+		break;
+
+	case RH_SET_FEATURE | RH_OTHER | RH_CLASS:
+		debug("RH_SET_FEATURE | RH_OTHER | RH_CLASS\n");
+
+		switch (wValue) {
+		case RH_PORT_SUSPEND:
+			len = 0;
+			break;
+
+		case RH_PORT_RESET:
+			musb_port_reset(1);
+			len = 0;
+			break;
+
+		case RH_PORT_POWER:
+			len = 0;
+			break;
+
+		case RH_PORT_ENABLE:
+			len = 0;
+			break;
+
+		default:
+			debug("invalid wValue\n");
+			stat = USB_ST_STALLED;
+		}
+
+		port_status |= 1 << wValue;
+		break;
+
+	case RH_SET_ADDRESS:
+		debug("RH_SET_ADDRESS\n");
+
+		rh_devnum = wValue;
+		len = 0;
+		break;
+
+	case RH_GET_DESCRIPTOR:
+		debug("RH_GET_DESCRIPTOR: %x, %d\n", wValue, wLength);
+
+		switch (wValue) {
+		case (USB_DT_DEVICE << 8):	/* device descriptor */
+			len = min_t(unsigned int,
+				    leni, min_t(unsigned int,
+						sizeof(root_hub_dev_des),
+						wLength));
+			data_buf = root_hub_dev_des;
+			break;
+
+		case (USB_DT_CONFIG << 8):	/* configuration descriptor */
+			len = min_t(unsigned int,
+				    leni, min_t(unsigned int,
+						sizeof(root_hub_config_des),
+						wLength));
+			data_buf = root_hub_config_des;
+			break;
+
+		case ((USB_DT_STRING << 8) | 0x00):	/* string 0 descriptors */
+			len = min_t(unsigned int,
+				    leni, min_t(unsigned int,
+						sizeof(root_hub_str_index0),
+						wLength));
+			data_buf = root_hub_str_index0;
+			break;
+
+		case ((USB_DT_STRING << 8) | 0x01):	/* string 1 descriptors */
+			len = min_t(unsigned int,
+				    leni, min_t(unsigned int,
+						sizeof(root_hub_str_index1),
+						wLength));
+			data_buf = root_hub_str_index1;
+			break;
+
+		default:
+			debug("invalid wValue\n");
+			stat = USB_ST_STALLED;
+		}
+
+		break;
+
+	case RH_GET_DESCRIPTOR | RH_CLASS:
+		debug("RH_GET_DESCRIPTOR | RH_CLASS\n");
+
+		data_buf[0] = 0x09;	/* min length; */
+		data_buf[1] = 0x29;
+		data_buf[2] = 0x1;	/* 1 port */
+		data_buf[3] = 0x01;	/* per-port power switching */
+		data_buf[3] |= 0x10;	/* no overcurrent reporting */
+
+		/* Corresponds to data_buf[4-7] */
+		data_buf[4] = 0;
+		data_buf[5] = 5;
+		data_buf[6] = 0;
+		data_buf[7] = 0x02;
+		data_buf[8] = 0xff;
+
+		len = min_t(unsigned int, leni,
+			    min_t(unsigned int, data_buf[0], wLength));
+		break;
+
+	case RH_GET_CONFIGURATION:
+		debug("RH_GET_CONFIGURATION\n");
+
+		*(__u8 *) data_buf = 0x01;
+		len = 1;
+		break;
+
+	case RH_SET_CONFIGURATION:
+		debug("RH_SET_CONFIGURATION\n");
+
+		len = 0;
+		break;
+
+	default:
+		debug("*** *** *** unsupported root hub command *** *** ***\n");
+		stat = USB_ST_STALLED;
+	}
+
+	len = min_t(int, len, leni);
+	if (buffer != data_buf)
+		memcpy(buffer, data_buf, len);
+
+	dev->act_len = len;
+	dev->status = stat;
+	debug("dev act_len %d, status %d\n", dev->act_len, dev->status);
+
+	return stat;
+}
+
+static void musb_rh_init(void)
+{
+	rh_devnum = 0;
+	port_status = 0;
+}
+
+#else
+
+static void musb_rh_init(void) {}
+
+#endif
+
+/*
  * do a control transfer
  */
 int submit_control_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
@@ -419,13 +840,21 @@ int submit_control_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
 	u16 csr;
 	u8  devspeed;
 
+#ifdef MUSB_NO_MULTIPOINT
+	/* Control message is for the HUB? */
+	if (devnum == rh_devnum)
+		return musb_submit_rh_msg(dev, pipe, buffer, len, setup);
+#endif
+
 	/* select control endpoint */
 	writeb(MUSB_CONTROL_EP, &musbr->index);
 	csr = readw(&musbr->txcsr);
 
+#ifndef MUSB_NO_MULTIPOINT
 	/* target addr and (for multipoint) hub addr/port */
 	writeb(devnum, &musbr->tar[MUSB_CONTROL_EP].txfuncaddr);
 	writeb(devnum, &musbr->tar[MUSB_CONTROL_EP].rxfuncaddr);
+#endif
 
 	/* configure the hub address and the port number as required */
 	devspeed = get_dev_speed(dev);
@@ -435,10 +864,12 @@ int submit_control_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
 		writeb(devspeed << 6, &musbr->txtype);
 	} else {
 		writeb(musb_cfg.musb_speed << 6, &musbr->txtype);
+#ifndef MUSB_NO_MULTIPOINT
 		writeb(0, &musbr->tar[MUSB_CONTROL_EP].txhubaddr);
 		writeb(0, &musbr->tar[MUSB_CONTROL_EP].txhubport);
 		writeb(0, &musbr->tar[MUSB_CONTROL_EP].rxhubaddr);
 		writeb(0, &musbr->tar[MUSB_CONTROL_EP].rxhubport);
+#endif
 	}
 
 	/* Control transfer setup phase */
@@ -497,7 +928,9 @@ int submit_bulk_msg(struct usb_device *dev, unsigned long pipe,
 {
 	int dir_out = usb_pipeout(pipe);
 	int ep = usb_pipeendpoint(pipe);
+#ifndef MUSB_NO_MULTIPOINT
 	int devnum = usb_pipedevice(pipe);
+#endif
 	u8  type;
 	u16 csr;
 	u32 txlen = 0;
@@ -507,11 +940,13 @@ int submit_bulk_msg(struct usb_device *dev, unsigned long pipe,
 	/* select bulk endpoint */
 	writeb(MUSB_BULK_EP, &musbr->index);
 
+#ifndef MUSB_NO_MULTIPOINT
 	/* write the address of the device */
 	if (dir_out)
 		writeb(devnum, &musbr->tar[MUSB_BULK_EP].txfuncaddr);
 	else
 		writeb(devnum, &musbr->tar[MUSB_BULK_EP].rxfuncaddr);
+#endif
 
 	/* configure the hub address and the port number as required */
 	devspeed = get_dev_speed(dev);
@@ -524,6 +959,7 @@ int submit_bulk_msg(struct usb_device *dev, unsigned long pipe,
 		 */
 		config_hub_port(dev, MUSB_BULK_EP);
 	} else {
+#ifndef MUSB_NO_MULTIPOINT
 		if (dir_out) {
 			writeb(0, &musbr->tar[MUSB_BULK_EP].txhubaddr);
 			writeb(0, &musbr->tar[MUSB_BULK_EP].txhubport);
@@ -531,6 +967,7 @@ int submit_bulk_msg(struct usb_device *dev, unsigned long pipe,
 			writeb(0, &musbr->tar[MUSB_BULK_EP].rxhubaddr);
 			writeb(0, &musbr->tar[MUSB_BULK_EP].rxhubport);
 		}
+#endif
 		devspeed = musb_cfg.musb_speed;
 	}
 
@@ -590,7 +1027,8 @@ int submit_bulk_msg(struct usb_device *dev, unsigned long pipe,
 					(len-txlen) : dev->epmaxpacketin[ep];
 
 			/* Set the ReqPkt bit */
-			writew(MUSB_RXCSR_H_REQPKT, &musbr->rxcsr);
+			csr = readw(&musbr->rxcsr);
+			writew(csr | MUSB_RXCSR_H_REQPKT, &musbr->rxcsr);
 
 			/* Wait until the RxPktRdy bit is set */
 			if (!wait_until_rxep_ready(dev, MUSB_BULK_EP)) {
@@ -634,6 +1072,8 @@ int usb_lowlevel_init(void)
 	u8  power;
 	u32 timeout;
 
+	musb_rh_init();
+
 	if (musb_platform_init() == -1)
 		return -1;
 
@@ -696,7 +1136,9 @@ int submit_int_msg(struct usb_device *dev, unsigned long pipe,
 {
 	int dir_out = usb_pipeout(pipe);
 	int ep = usb_pipeendpoint(pipe);
+#ifndef MUSB_NO_MULTIPOINT
 	int devnum = usb_pipedevice(pipe);
+#endif
 	u8  type;
 	u16 csr;
 	u32 txlen = 0;
@@ -706,11 +1148,13 @@ int submit_int_msg(struct usb_device *dev, unsigned long pipe,
 	/* select interrupt endpoint */
 	writeb(MUSB_INTR_EP, &musbr->index);
 
+#ifndef MUSB_NO_MULTIPOINT
 	/* write the address of the device */
 	if (dir_out)
 		writeb(devnum, &musbr->tar[MUSB_INTR_EP].txfuncaddr);
 	else
 		writeb(devnum, &musbr->tar[MUSB_INTR_EP].rxfuncaddr);
+#endif
 
 	/* configure the hub address and the port number as required */
 	devspeed = get_dev_speed(dev);
@@ -723,6 +1167,7 @@ int submit_int_msg(struct usb_device *dev, unsigned long pipe,
 		 */
 		config_hub_port(dev, MUSB_INTR_EP);
 	} else {
+#ifndef MUSB_NO_MULTIPOINT
 		if (dir_out) {
 			writeb(0, &musbr->tar[MUSB_INTR_EP].txhubaddr);
 			writeb(0, &musbr->tar[MUSB_INTR_EP].txhubport);
@@ -730,6 +1175,7 @@ int submit_int_msg(struct usb_device *dev, unsigned long pipe,
 			writeb(0, &musbr->tar[MUSB_INTR_EP].rxhubaddr);
 			writeb(0, &musbr->tar[MUSB_INTR_EP].rxhubport);
 		}
+#endif
 		devspeed = musb_cfg.musb_speed;
 	}
 
@@ -755,7 +1201,8 @@ int submit_int_msg(struct usb_device *dev, unsigned long pipe,
 					(len-txlen) : dev->epmaxpacketin[ep];
 
 			/* Set the ReqPkt bit */
-			writew(MUSB_RXCSR_H_REQPKT, &musbr->rxcsr);
+			csr = readw(&musbr->rxcsr);
+			writew(csr | MUSB_RXCSR_H_REQPKT, &musbr->rxcsr);
 
 			/* Wait until the RxPktRdy bit is set */
 			if (!wait_until_rxep_ready(dev, MUSB_INTR_EP)) {
diff --git a/drivers/usb/musb/musb_hcd.h b/drivers/usb/musb/musb_hcd.h
index 17e9091..dde7d37 100644
--- a/drivers/usb/musb/musb_hcd.h
+++ b/drivers/usb/musb/musb_hcd.h
@@ -38,7 +38,9 @@ extern unsigned char new[];
 #define MUSB_CONTROL_EP 0
 
 /* This defines the endpoint number used for bulk transfer */
-#define MUSB_BULK_EP 1
+#ifndef MUSB_BULK_EP
+# define MUSB_BULK_EP 1
+#endif
 
 /* This defines the endpoint number used for interrupt transfer */
 #define MUSB_INTR_EP 2
@@ -48,6 +50,61 @@ extern unsigned char new[];
 	((readb(&musbr->power) & MUSB_POWER_HSMODE) \
 		>> MUSB_POWER_HSMODE_SHIFT)
 
+#define min_t(type, x, y)	\
+	({ type __x = (x); type __y = (y); __x < __y ? __x : __y; })
+
+/* USB HUB CONSTANTS (not OHCI-specific; see hub.h) */
+
+/* destination of request */
+#define RH_INTERFACE		   0x01
+#define RH_ENDPOINT		   0x02
+#define RH_OTHER		   0x03
+
+#define RH_CLASS		   0x20
+#define RH_VENDOR		   0x40
+
+/* Requests: bRequest << 8 | bmRequestType */
+#define RH_GET_STATUS		0x0080
+#define RH_CLEAR_FEATURE	0x0100
+#define RH_SET_FEATURE		0x0300
+#define RH_SET_ADDRESS		0x0500
+#define RH_GET_DESCRIPTOR	0x0680
+#define RH_SET_DESCRIPTOR	0x0700
+#define RH_GET_CONFIGURATION	0x0880
+#define RH_SET_CONFIGURATION	0x0900
+#define RH_GET_STATE		0x0280
+#define RH_GET_INTERFACE	0x0A80
+#define RH_SET_INTERFACE	0x0B00
+#define RH_SYNC_FRAME		0x0C80
+/* Our Vendor Specific Request */
+#define RH_SET_EP		0x2000
+
+/* Hub port features */
+#define RH_PORT_CONNECTION	   0x00
+#define RH_PORT_ENABLE		   0x01
+#define RH_PORT_SUSPEND		   0x02
+#define RH_PORT_OVER_CURRENT	   0x03
+#define RH_PORT_RESET		   0x04
+#define RH_PORT_POWER		   0x08
+#define RH_PORT_LOW_SPEED	   0x09
+
+#define RH_C_PORT_CONNECTION	   0x10
+#define RH_C_PORT_ENABLE	   0x11
+#define RH_C_PORT_SUSPEND	   0x12
+#define RH_C_PORT_OVER_CURRENT	   0x13
+#define RH_C_PORT_RESET		   0x14
+
+/* Hub features */
+#define RH_C_HUB_LOCAL_POWER	   0x00
+#define RH_C_HUB_OVER_CURRENT	   0x01
+
+#define RH_DEVICE_REMOTE_WAKEUP	   0x00
+#define RH_ENDPOINT_STALL	   0x01
+
+#define RH_ACK			   0x01
+#define RH_REQ_ERR		   -1
+#define RH_NACK			   0x00
+
 /* extern functions */
 extern int musb_platform_init(void);
 extern void musb_platform_deinit(void);
diff --git a/drivers/usb/musb/omap3.c b/drivers/usb/musb/omap3.c
index ea98c3c..3bfd0a0 100644
--- a/drivers/usb/musb/omap3.c
+++ b/drivers/usb/musb/omap3.c
@@ -123,7 +123,10 @@ int musb_platform_init(void)
 	}
 
 	ret = platform_needs_initialization;
+
+#ifdef CONFIG_TWL4030_USB
 end:
+#endif
 	return ret;
 
 }
diff --git a/include/asm-arm/arch-davinci/gpio_defs.h b/include/asm-arm/arch-davinci/gpio_defs.h
index ff62976..1be2ac2 100644
--- a/include/asm-arm/arch-davinci/gpio_defs.h
+++ b/include/asm-arm/arch-davinci/gpio_defs.h
@@ -22,12 +22,21 @@
 #ifndef _GPIO_DEFS_H_
 #define _GPIO_DEFS_H_
 
+#ifndef CONFIG_SOC_DA8XX
 #define DAVINCI_GPIO_BINTEN	0x01C67008
 #define DAVINCI_GPIO_BANK01	0x01C67010
 #define DAVINCI_GPIO_BANK23	0x01C67038
 #define DAVINCI_GPIO_BANK45	0x01C67060
 #define DAVINCI_GPIO_BANK67	0x01C67088
 
+#else /* CONFIG_SOC_DA8XX */
+#define DAVINCI_GPIO_BINTEN	0x01E26008
+#define DAVINCI_GPIO_BANK01	0x01E26010
+#define DAVINCI_GPIO_BANK23	0x01E26038
+#define DAVINCI_GPIO_BANK45	0x01E26060
+#define DAVINCI_GPIO_BANK67	0x01E26088
+#endif /* CONFIG_SOC_DA8XX */
+
 struct davinci_gpio {
 	unsigned int dir;
 	unsigned int out_data;
@@ -49,4 +58,9 @@ struct davinci_gpio_bank {
 	unsigned long base;
 };
 
+#define davinci_gpio_bank01 ((struct davinci_gpio *)DAVINCI_GPIO_BANK01)
+#define davinci_gpio_bank23 ((struct davinci_gpio *)DAVINCI_GPIO_BANK23)
+#define davinci_gpio_bank45 ((struct davinci_gpio *)DAVINCI_GPIO_BANK45)
+#define davinci_gpio_bank67 ((struct davinci_gpio *)DAVINCI_GPIO_BANK67)
+
 #endif
diff --git a/include/asm-blackfin/mach-common/bits/usb.h b/include/asm-blackfin/mach-common/bits/usb.h
new file mode 100644
index 0000000..c639058
--- /dev/null
+++ b/include/asm-blackfin/mach-common/bits/usb.h
@@ -0,0 +1,264 @@
+/*
+ * USB Masks
+ */
+
+#ifndef __BFIN_PERIPHERAL_USB__
+#define __BFIN_PERIPHERAL_USB__
+
+/* Bit masks for USB_FADDR */
+
+#define FUNCTION_ADDRESS	0x7f	/* Function address */
+
+/* Bit masks for USB_POWER */
+
+#define ENABLE_SUSPENDM		0x1	/* enable SuspendM output */
+#define SUSPEND_MODE		0x2	/* Suspend Mode indicator */
+#define RESUME_MODE		0x4	/* DMA Mode */
+#define RESET			0x8	/* Reset indicator */
+#define HS_MODE			0x10	/* High Speed mode indicator */
+#define HS_ENABLE		0x20	/* high Speed Enable */
+#define SOFT_CONN		0x40	/* Soft connect */
+#define ISO_UPDATE		0x80	/* Isochronous update */
+
+/* Bit masks for USB_INTRTX */
+
+#define EP0_TX			0x1	/* Tx Endpoint 0 interrupt */
+#define EP1_TX			0x2	/* Tx Endpoint 1 interrupt */
+#define EP2_TX			0x4	/* Tx Endpoint 2 interrupt */
+#define EP3_TX			0x8	/* Tx Endpoint 3 interrupt */
+#define EP4_TX			0x10	/* Tx Endpoint 4 interrupt */
+#define EP5_TX			0x20	/* Tx Endpoint 5 interrupt */
+#define EP6_TX			0x40	/* Tx Endpoint 6 interrupt */
+#define EP7_TX			0x80	/* Tx Endpoint 7 interrupt */
+
+/* Bit masks for USB_INTRRX */
+
+#define EP1_RX			0x2	/* Rx Endpoint 1 interrupt */
+#define EP2_RX			0x4	/* Rx Endpoint 2 interrupt */
+#define EP3_RX			0x8	/* Rx Endpoint 3 interrupt */
+#define EP4_RX			0x10	/* Rx Endpoint 4 interrupt */
+#define EP5_RX			0x20	/* Rx Endpoint 5 interrupt */
+#define EP6_RX			0x40	/* Rx Endpoint 6 interrupt */
+#define EP7_RX			0x80	/* Rx Endpoint 7 interrupt */
+
+/* Bit masks for USB_INTRTXE */
+
+#define EP0_TX_E		0x1	/* Endpoint 0 interrupt Enable */
+#define EP1_TX_E		0x2	/* Tx Endpoint 1 interrupt enable */
+#define EP2_TX_E		0x4	/* Tx Endpoint 2 interrupt enable */
+#define EP3_TX_E		0x8	/* Tx Endpoint 3 interrupt enable */
+#define EP4_TX_E		0x10	/* Tx Endpoint 4 interrupt enable */
+#define EP5_TX_E		0x20	/* Tx Endpoint 5 interrupt enable */
+#define EP6_TX_E		0x40	/* Tx Endpoint 6 interrupt enable */
+#define EP7_TX_E		0x80	/* Tx Endpoint 7 interrupt enable */
+
+/* Bit masks for USB_INTRRXE */
+
+#define EP1_RX_E		0x02	/* Rx Endpoint 1 interrupt enable */
+#define EP2_RX_E		0x04	/* Rx Endpoint 2 interrupt enable */
+#define EP3_RX_E		0x08	/* Rx Endpoint 3 interrupt enable */
+#define EP4_RX_E		0x10	/* Rx Endpoint 4 interrupt enable */
+#define EP5_RX_E		0x20	/* Rx Endpoint 5 interrupt enable */
+#define EP6_RX_E		0x40	/* Rx Endpoint 6 interrupt enable */
+#define EP7_RX_E		0x80	/* Rx Endpoint 7 interrupt enable */
+
+/* Bit masks for USB_INTRUSB */
+
+#define SUSPEND_B		0x01	/* Suspend indicator */
+#define RESUME_B		0x02	/* Resume indicator */
+#define RESET_OR_BABLE_B	0x04	/* Reset/babble indicator */
+#define SOF_B			0x08	/* Start of frame */
+#define CONN_B			0x10	/* Connection indicator */
+#define DISCON_B		0x20	/* Disconnect indicator */
+#define SESSION_REQ_B		0x40	/* Session Request */
+#define VBUS_ERROR_B		0x80	/* Vbus threshold indicator */
+
+/* Bit masks for USB_INTRUSBE */
+
+#define SUSPEND_BE		0x01	/* Suspend indicator int enable */
+#define RESUME_BE		0x02	/* Resume indicator int enable */
+#define RESET_OR_BABLE_BE	0x04	/* Reset/babble indicator int enable */
+#define SOF_BE			0x08	/* Start of frame int enable */
+#define CONN_BE			0x10	/* Connection indicator int enable */
+#define DISCON_BE		0x20	/* Disconnect indicator int enable */
+#define SESSION_REQ_BE		0x40	/* Session Request int enable */
+#define VBUS_ERROR_BE		0x80	/* Vbus threshold indicator int enable */
+
+/* Bit masks for USB_FRAME */
+
+#define FRAME_NUMBER		0x7ff	/* Frame number */
+
+/* Bit masks for USB_INDEX */
+
+#define SELECTED_ENDPOINT	0xf	/* selected endpoint */
+
+/* Bit masks for USB_GLOBAL_CTL */
+
+#define GLOBAL_ENA		0x0001	/* enables USB module */
+#define EP1_TX_ENA		0x0002	/* Transmit endpoint 1 enable */
+#define EP2_TX_ENA		0x0004	/* Transmit endpoint 2 enable */
+#define EP3_TX_ENA		0x0008	/* Transmit endpoint 3 enable */
+#define EP4_TX_ENA		0x0010	/* Transmit endpoint 4 enable */
+#define EP5_TX_ENA		0x0020	/* Transmit endpoint 5 enable */
+#define EP6_TX_ENA		0x0040	/* Transmit endpoint 6 enable */
+#define EP7_TX_ENA		0x0080	/* Transmit endpoint 7 enable */
+#define EP1_RX_ENA		0x0100	/* Receive endpoint 1 enable */
+#define EP2_RX_ENA		0x0200	/* Receive endpoint 2 enable */
+#define EP3_RX_ENA		0x0400	/* Receive endpoint 3 enable */
+#define EP4_RX_ENA		0x0800	/* Receive endpoint 4 enable */
+#define EP5_RX_ENA		0x1000	/* Receive endpoint 5 enable */
+#define EP6_RX_ENA		0x2000	/* Receive endpoint 6 enable */
+#define EP7_RX_ENA		0x4000	/* Receive endpoint 7 enable */
+
+/* Bit masks for USB_OTG_DEV_CTL */
+
+#define SESSION			0x1	/* session indicator */
+#define HOST_REQ		0x2	/* Host negotiation request */
+#define HOST_MODE		0x4	/* indicates USBDRC is a host */
+#define VBUS0			0x8	/* Vbus level indicator[0] */
+#define VBUS1			0x10	/* Vbus level indicator[1] */
+#define LSDEV			0x20	/* Low-speed indicator */
+#define FSDEV			0x40	/* Full or High-speed indicator */
+#define B_DEVICE		0x80	/* A' or 'B' device indicator */
+
+/* Bit masks for USB_OTG_VBUS_IRQ */
+
+#define DRIVE_VBUS_ON		0x1	/* indicator to drive VBUS control circuit */
+#define DRIVE_VBUS_OFF		0x2	/* indicator to shut off charge pump */
+#define CHRG_VBUS_START		0x4	/* indicator for external circuit to start charging VBUS */
+#define CHRG_VBUS_END		0x8	/* indicator for external circuit to end charging VBUS */
+#define DISCHRG_VBUS_START	0x10	/* indicator to start discharging VBUS */
+#define DISCHRG_VBUS_END	0x20	/* indicator to stop discharging VBUS */
+
+/* Bit masks for USB_OTG_VBUS_MASK */
+
+#define DRIVE_VBUS_ON_ENA	0x01	/* enable DRIVE_VBUS_ON interrupt */
+#define DRIVE_VBUS_OFF_ENA	0x02	/* enable DRIVE_VBUS_OFF interrupt */
+#define CHRG_VBUS_START_ENA	0x04	/* enable CHRG_VBUS_START interrupt */
+#define CHRG_VBUS_END_ENA	0x08	/* enable CHRG_VBUS_END interrupt */
+#define DISCHRG_VBUS_START_ENA	0x10	/* enable DISCHRG_VBUS_START interrupt */
+#define DISCHRG_VBUS_END_ENA	0x20	/* enable DISCHRG_VBUS_END interrupt */
+
+/* Bit masks for USB_CSR0 */
+
+#define RXPKTRDY		0x1	/* data packet receive indicator */
+#define TXPKTRDY		0x2	/* data packet in FIFO indicator */
+#define STALL_SENT		0x4	/* STALL handshake sent */
+#define DATAEND			0x8	/* Data end indicator */
+#define SETUPEND		0x10	/* Setup end */
+#define SENDSTALL		0x20	/* Send STALL handshake */
+#define SERVICED_RXPKTRDY	0x40	/* used to clear the RxPktRdy bit */
+#define SERVICED_SETUPEND	0x80	/* used to clear the SetupEnd bit */
+#define FLUSHFIFO		0x100	/* flush endpoint FIFO */
+#define STALL_RECEIVED_H	0x4	/* STALL handshake received host mode */
+#define SETUPPKT_H		0x8	/* send Setup token host mode */
+#define ERROR_H			0x10	/* timeout error indicator host mode */
+#define REQPKT_H		0x20	/* Request an IN transaction host mode */
+#define STATUSPKT_H		0x40	/* Status stage transaction host mode */
+#define NAK_TIMEOUT_H		0x80	/* EP0 halted after a NAK host mode */
+
+/* Bit masks for USB_COUNT0 */
+
+#define EP0_RX_COUNT		0x7f	/* number of received bytes in EP0 FIFO */
+
+/* Bit masks for USB_NAKLIMIT0 */
+
+#define EP0_NAK_LIMIT		0x1f	/* frames/micro frames count after which EP0 timeouts */
+
+/* Bit masks for USB_TX_MAX_PACKET */
+
+#define MAX_PACKET_SIZE_T	0x7ff	/* maximum data pay load in a frame */
+
+/* Bit masks for USB_RX_MAX_PACKET */
+
+#define MAX_PACKET_SIZE_R	0x7ff	/* maximum data pay load in a frame */
+
+/* Bit masks for USB_TXCSR */
+
+#define TXPKTRDY_T		0x1	/* data packet in FIFO indicator */
+#define FIFO_NOT_EMPTY_T	0x2	/* FIFO not empty */
+#define UNDERRUN_T		0x4	/* TxPktRdy not set for an IN token */
+#define FLUSHFIFO_T		0x8	/* flush endpoint FIFO */
+#define STALL_SEND_T		0x10	/* issue a Stall handshake */
+#define STALL_SENT_T		0x20	/* Stall handshake transmitted */
+#define CLEAR_DATATOGGLE_T	0x40	/* clear endpoint data toggle */
+#define INCOMPTX_T		0x80	/* indicates that a large packet is split */
+#define DMAREQMODE_T		0x400	/* DMA mode (0 or 1) selection */
+#define FORCE_DATATOGGLE_T	0x800	/* Force data toggle */
+#define DMAREQ_ENA_T		0x1000	/* Enable DMA request for Tx EP */
+#define ISO_T			0x4000	/* enable Isochronous transfers */
+#define AUTOSET_T		0x8000	/* allows TxPktRdy to be set automatically */
+#define ERROR_TH		0x4	/* error condition host mode */
+#define STALL_RECEIVED_TH	0x20	/* Stall handshake received host mode */
+#define NAK_TIMEOUT_TH		0x80	/* NAK timeout host mode */
+
+/* Bit masks for USB_TXCOUNT */
+
+#define TX_COUNT		0x1fff	/* Byte len for the selected endpoint Tx FIFO */
+
+/* Bit masks for USB_RXCSR */
+
+#define RXPKTRDY_R		0x1	/* data packet in FIFO indicator */
+#define FIFO_FULL_R		0x2	/* FIFO not empty */
+#define OVERRUN_R		0x4	/* TxPktRdy not set for an IN token */
+#define DATAERROR_R		0x8	/* Out packet cannot be loaded into Rx FIFO */
+#define FLUSHFIFO_R		0x10	/* flush endpoint FIFO */
+#define STALL_SEND_R		0x20	/* issue a Stall handshake */
+#define STALL_SENT_R		0x40	/* Stall handshake transmitted */
+#define CLEAR_DATATOGGLE_R	0x80	/* clear endpoint data toggle */
+#define INCOMPRX_R		0x100	/* indicates that a large packet is split */
+#define DMAREQMODE_R		0x800	/* DMA mode (0 or 1) selection */
+#define DISNYET_R		0x1000	/* disable Nyet handshakes */
+#define DMAREQ_ENA_R		0x2000	/* Enable DMA request for Tx EP */
+#define ISO_R			0x4000	/* enable Isochronous transfers */
+#define AUTOCLEAR_R		0x8000	/* allows TxPktRdy to be set automatically */
+#define ERROR_RH		0x4	/* TxPktRdy not set for an IN token host mode */
+#define REQPKT_RH		0x20	/* request an IN transaction host mode */
+#define STALL_RECEIVED_RH	0x40	/* Stall handshake received host mode */
+#define INCOMPRX_RH		0x100	/* large packet is split host mode */
+#define DMAREQMODE_RH		0x800	/* DMA mode (0 or 1) selection host mode */
+#define AUTOREQ_RH		0x4000	/* sets ReqPkt automatically host mode */
+
+/* Bit masks for USB_RXCOUNT */
+
+#define RX_COUNT		0x1fff	/* Packet byte len in the Rx FIFO */
+
+/* Bit masks for USB_TXTYPE */
+
+#define TARGET_EP_NO_T		0xf	/* EP number */
+#define PROTOCOL_T		0xc	/* transfer type */
+
+/* Bit masks for USB_TXINTERVAL */
+
+#define TX_POLL_INTERVAL	0xff	/* polling interval for selected Tx EP */
+
+/* Bit masks for USB_RXTYPE */
+
+#define TARGET_EP_NO_R		0xf	/* EP number */
+#define PROTOCOL_R		0xc	/* transfer type */
+
+/* Bit masks for USB_RXINTERVAL */
+
+#define RX_POLL_INTERVAL	0xff	/* polling interval for selected Rx EP */
+
+/* Bit masks for USB_DMA_INTERRUPT */
+
+#define DMA0_INT		0x1	/* DMA0 pending interrupt */
+#define DMA1_INT		0x2	/* DMA1 pending interrupt */
+#define DMA2_INT		0x4	/* DMA2 pending interrupt */
+#define DMA3_INT		0x8	/* DMA3 pending interrupt */
+#define DMA4_INT		0x10	/* DMA4 pending interrupt */
+#define DMA5_INT		0x20	/* DMA5 pending interrupt */
+#define DMA6_INT		0x40	/* DMA6 pending interrupt */
+#define DMA7_INT		0x80	/* DMA7 pending interrupt */
+
+/* Bit masks for USB_DMAxCONTROL */
+
+#define DMA_ENA			0x1	/* DMA enable */
+#define DIRECTION		0x2	/* direction of DMA transfer */
+#define MODE			0x4	/* DMA Bus error */
+#define INT_ENA			0x8	/* Interrupt enable */
+#define EPNUM			0xf0	/* EP number */
+#define BUSERROR		0x100	/* DMA Bus error */
+
+#endif
diff --git a/include/configs/da830evm.h b/include/configs/da830evm.h
index 38e2ce1..432cd57 100644
--- a/include/configs/da830evm.h
+++ b/include/configs/da830evm.h
@@ -149,6 +149,11 @@
 #define CONFIG_SYS_ENV_SPI_MAX_HZ	CONFIG_SF_DEFAULT_SPEED
 #endif
 
+/*
+ * USB configuration
+ */
+#define CONFIG_USB_DA8XX	/* Platform hookup to MUSB controller */
+#define CONFIG_MUSB_HCD
 
 /*
  * U-Boot general configuration
@@ -234,10 +239,33 @@
 #endif
 
 #ifdef CONFIG_USB_DA8XX
-#define CONFIG_CMD_USB		/* include support for usb	*/
-#define CONFIG_CMD_STORAGE	/* include support for usb	*/
-#define CONFIG_CMD_FAT		/* include support for FAT/storage*/
-#define CONFIG_DOS_PARTITION	/* include support for FAT/storage*/
-#endif
 
+#ifdef CONFIG_MUSB_HCD		/* include support for usb host */
+#define CONFIG_CMD_USB		/* include support for usb cmd */
+
+#define CONFIG_USB_STORAGE	/* MSC class support */
+#define CONFIG_CMD_STORAGE	/* inclue support for usb-storage cmd */
+#define CONFIG_CMD_FAT		/* inclue support for FAT/storage */
+#define CONFIG_DOS_PARTITION	/* inclue support for FAT/storage */
+
+#ifdef CONFIG_USB_KEYBOARD	/* HID class support */
+#define CONFIG_SYS_USB_EVENT_POLL
+#define CONFIG_PREBOOT "usb start"
+#endif /* CONFIG_USB_KEYBOARD */
+
+#endif /* CONFIG_MUSB_HCD */
+
+#ifdef CONFIG_MUSB_UDC
+/* USB device configuration */
+#define CONFIG_USB_DEVICE		1
+#define CONFIG_USB_TTY			1
+#define CONFIG_SYS_CONSOLE_IS_IN_ENV	1
+/* Change these to suit your needs */
+#define CONFIG_USBD_VENDORID		0x0451
+#define CONFIG_USBD_PRODUCTID		0x5678
+#define CONFIG_USBD_MANUFACTURER	"Texas Instruments"
+#define CONFIG_USBD_PRODUCT_NAME	"DA830EVM"
+#endif /* CONFIG_MUSB_UDC */
+
+#endif /* CONFIG_USB_DA8XX */
 #endif /* __CONFIG_H */
diff --git a/include/configs/sequoia.h b/include/configs/sequoia.h
index 5788d58..568d9fc 100644
--- a/include/configs/sequoia.h
+++ b/include/configs/sequoia.h
@@ -282,8 +282,20 @@
 
 /* USB */
 #ifdef CONFIG_440EPX
+
+#undef CONFIG_USB_EHCI	/* OHCI by default */
+
+#ifdef CONFIG_USB_EHCI
+#define CONFIG_USB_EHCI_PPC4XX
+#define CONFIG_SYS_PPC4XX_USB_ADDR	0xe0000300
+#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
+#define CONFIG_EHCI_MMIO_BIG_ENDIAN
+#define CONFIG_EHCI_DESC_BIG_ENDIAN
+#ifdef CONFIG_4xx_DCACHE
+#define CONFIG_EHCI_DCACHE
+#endif
+#else /* CONFIG_USB_EHCI */
 #define CONFIG_USB_OHCI_NEW
-#define CONFIG_USB_STORAGE
 #define CONFIG_SYS_OHCI_BE_CONTROLLER
 
 #undef CONFIG_SYS_USB_OHCI_BOARD_INIT
@@ -291,7 +303,9 @@
 #define CONFIG_SYS_USB_OHCI_REGS_BASE	CONFIG_SYS_USB_HOST
 #define CONFIG_SYS_USB_OHCI_SLOT_NAME	"ppc440"
 #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 15
+#endif
 
+#define CONFIG_USB_STORAGE
 /* Comment this out to enable USB 1.1 device */
 #define USB_2_0_DEVICE
 
diff --git a/include/usb.h b/include/usb.h
index 1cc3e42..a1f09d4 100644
--- a/include/usb.h
+++ b/include/usb.h
@@ -132,7 +132,8 @@ struct usb_device {
 	defined(CONFIG_USB_EHCI) || defined(CONFIG_USB_OHCI_NEW) || \
 	defined(CONFIG_USB_SL811HS) || defined(CONFIG_USB_ISP116X_HCD) || \
 	defined(CONFIG_USB_R8A66597_HCD) || defined(CONFIG_USB_DAVINCI) || \
-	defined(CONFIG_USB_OMAP3)
+	defined(CONFIG_USB_OMAP3) || defined(CONFIG_USB_DA8XX) || \
+	defined(CONFIG_USB_BLACKFIN)
 
 int usb_lowlevel_init(void);
 int usb_lowlevel_stop(void);