sbc8548: correct local bus SDRAM size from 64M to 128M

The size of the LB SDRAM on this board is 128MB, spanning CS3
and CS4.  It was previously only being configured for 64MB on
CS3, since that was what the original codebase of the MPC8548CDS
had.  In addition to setting up BR4/OR4, this also adds the TLB
entry for the second half of the SDRAM.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

3 files changed, 61 insertions, 12 deletions

diff --git a/board/sbc8548/sbc8548.c b/board/sbc8548/sbc8548.c
index ce998e1..f4bfd92 100644
--- a/board/sbc8548/sbc8548.c
+++ b/board/sbc8548/sbc8548.c
@@ -149,7 +149,7 @@ local_bus_init(void)
 void
 sdram_init(void)
 {
-#if defined(CONFIG_SYS_OR3_PRELIM) && defined(CONFIG_SYS_BR3_PRELIM)
+#if defined(CONFIG_SYS_LBC_SDRAM_SIZE)
 
 	uint idx;
 	volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR);
@@ -169,6 +169,12 @@ sdram_init(void)
 	out_be32(&lbc->br3, CONFIG_SYS_BR3_PRELIM);
 	asm("msync");
 
+	out_be32(&lbc->or4, CONFIG_SYS_OR4_PRELIM);
+	asm("msync");
+
+	out_be32(&lbc->br4, CONFIG_SYS_BR4_PRELIM);
+	asm("msync");
+
 	out_be32(&lbc->lbcr, CONFIG_SYS_LBC_LBCR);
 	asm("msync");
 
diff --git a/board/sbc8548/tlb.c b/board/sbc8548/tlb.c
index a0b4e36..a1795fc 100644
--- a/board/sbc8548/tlb.c
+++ b/board/sbc8548/tlb.c
@@ -93,14 +93,23 @@ struct fsl_e_tlb_entry tlb_table[] = {
 
 	/*
 	 * TLB 5:	64M	Cacheable, non-guarded
-	 * 0xf0000000	64M	LBC SDRAM
+	 * 0xf0000000	64M	LBC SDRAM First half
 	 */
 	SET_TLB_ENTRY(1, CONFIG_SYS_LBC_SDRAM_BASE, CONFIG_SYS_LBC_SDRAM_BASE,
 		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
 		      0, 5, BOOKE_PAGESZ_64M, 1),
 
 	/*
-	 * TLB 6:	16M	Cacheable, non-guarded
+	 * TLB 6:	64M	Cacheable, non-guarded
+	 * 0xf4000000	64M	LBC SDRAM Second half
+	 */
+	SET_TLB_ENTRY(1, CONFIG_SYS_LBC_SDRAM_BASE + 0x4000000,
+		      CONFIG_SYS_LBC_SDRAM_BASE + 0x4000000,
+		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
+		      0, 6, BOOKE_PAGESZ_64M, 1),
+
+	/*
+	 * TLB 7:	16M	Cacheable, non-guarded
 	 * 0xf8000000	1M	7-segment LED display
 	 * 0xf8100000	1M	User switches
 	 * 0xf8300000	1M	Board revision
@@ -108,24 +117,24 @@ struct fsl_e_tlb_entry tlb_table[] = {
 	 */
 	SET_TLB_ENTRY(1, CONFIG_SYS_EPLD_BASE, CONFIG_SYS_EPLD_BASE,
 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
-		      0, 6, BOOKE_PAGESZ_16M, 1),
+		      0, 7, BOOKE_PAGESZ_16M, 1),
 
 	/*
-	 * TLB 7:	4M	Non-cacheable, guarded
+	 * TLB 8:	4M	Non-cacheable, guarded
 	 * 0xfb800000	4M	1st 4MB block of 64MB user FLASH
 	 */
 	SET_TLB_ENTRY(1, CONFIG_SYS_ALT_FLASH, CONFIG_SYS_ALT_FLASH,
 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
-		      0, 7, BOOKE_PAGESZ_4M, 1),
+		      0, 8, BOOKE_PAGESZ_4M, 1),
 
 	/*
-	 * TLB 8:	4M	Non-cacheable, guarded
+	 * TLB 9:	4M	Non-cacheable, guarded
 	 * 0xfbc00000	4M	2nd 4MB block of 64MB user FLASH
 	 */
 	SET_TLB_ENTRY(1, CONFIG_SYS_ALT_FLASH + 0x400000,
 		      CONFIG_SYS_ALT_FLASH + 0x400000,
 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
-		      0, 8, BOOKE_PAGESZ_4M, 1),
+		      0, 9, BOOKE_PAGESZ_4M, 1),
 
 };
 
diff --git a/include/configs/sbc8548.h b/include/configs/sbc8548.h
index 5c1411f..009931d 100644
--- a/include/configs/sbc8548.h
+++ b/include/configs/sbc8548.h
@@ -197,13 +197,13 @@
 #define CONFIG_SYS_EEPROM_BASE		0xf8b00000
 
 /*
- * SDRAM on the Local Bus
+ * SDRAM on the Local Bus (CS3 and CS4)
  */
 #define CONFIG_SYS_LBC_SDRAM_BASE	0xf0000000	/* Localbus SDRAM */
-#define CONFIG_SYS_LBC_SDRAM_SIZE	64		/* LBC SDRAM is 64MB */
+#define CONFIG_SYS_LBC_SDRAM_SIZE	128		/* LBC SDRAM is 128MB */
 
 /*
- * Base Register 3 and Option Register 3 configure SDRAM.
+ * Base Register 3 and Option Register 3 configure the 1st 1/2 SDRAM.
  * The SDRAM base address, CONFIG_SYS_LBC_SDRAM_BASE, is 0xf0000000.
  *
  * For BR3, need:
@@ -221,7 +221,7 @@
 #define CONFIG_SYS_BR3_PRELIM		0xf0001861
 
 /*
- * The SDRAM size in MB, CONFIG_SYS_LBC_SDRAM_SIZE, is 64.
+ * The SDRAM size in MB, of 1/2 CONFIG_SYS_LBC_SDRAM_SIZE, is 64.
  *
  * For OR3, need:
  *    64MB mask for AM, OR3[0:7] = 1111 1100
@@ -236,6 +236,40 @@
 
 #define CONFIG_SYS_OR3_PRELIM		0xfc006cc0
 
+/*
+ * Base Register 4 and Option Register 4 configure the 2nd 1/2 SDRAM.
+ * The base address, (SDRAM_BASE + 1/2*SIZE), is 0xf4000000.
+ *
+ * For BR4, need:
+ *    Base address of 0xf4000000 = BR[0:16] = 1111 0100 0000 0000 0
+ *    port-size = 32-bits = BR2[19:20] = 11
+ *    no parity checking = BR2[21:22] = 00
+ *    SDRAM for MSEL = BR2[24:26] = 011
+ *    Valid = BR[31] = 1
+ *
+ * 0    4    8    12   16   20   24   28
+ * 1111 0000 0000 0000 0001 1000 0110 0001 = f4001861
+ *
+ */
+
+#define CONFIG_SYS_BR4_PRELIM		0xf4001861
+
+/*
+ * The SDRAM size in MB, of 1/2 CONFIG_SYS_LBC_SDRAM_SIZE, is 64.
+ *
+ * For OR4, need:
+ *    64MB mask for AM, OR3[0:7] = 1111 1100
+ *		   XAM, OR3[17:18] = 11
+ *    10 columns OR3[19-21] = 011
+ *    12 rows   OR3[23-25] = 011
+ *    EAD set for extra time OR[31] = 0
+ *
+ * 0    4    8    12   16   20   24   28
+ * 1111 1100 0000 0000 0110 1100 1100 0000 = fc006cc0
+ */
+
+#define CONFIG_SYS_OR4_PRELIM		0xfc006cc0
+
 #define CONFIG_SYS_LBC_LCRR		0x00000002    /* LB clock ratio reg */
 #define CONFIG_SYS_LBC_LBCR		0x00000000    /* LB config reg */
 #define CONFIG_SYS_LBC_LSRT		0x20000000  /* LB sdram refresh timer */