PPC405EP support added.

14 files changed, 686 insertions, 27 deletions

diff --git a/common/cmd_boot.c b/common/cmd_boot.c
index c2897a2..4e5ffb0 100644
--- a/common/cmd_boot.c
+++ b/common/cmd_boot.c
@@ -75,10 +75,10 @@ int do_bdinfo ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 	print_num ("immr_base",	    bd->bi_immr_base	);
 #endif
 	print_num ("bootflags",	    bd->bi_bootflags	);
-#if defined(CONFIG_405GP) || defined(CONFIG_405CR)
+#if defined(CONFIG_405GP) || defined(CONFIG_405CR) || defined(CONFIG_405EP)
 	print_str ("procfreq",	    strmhz(buf, bd->bi_procfreq));
 	print_str ("plb_busfreq",	    strmhz(buf, bd->bi_plb_busfreq));
-#if defined(CONFIG_405GP)
+#if defined(CONFIG_405GP) || defined(CONFIG_405EP)
 	print_str ("pci_busfreq",	    strmhz(buf, bd->bi_pci_busfreq));
 #endif
 #else
diff --git a/common/cmd_reginfo.c b/common/cmd_reginfo.c
index 954e937..198b9c7 100644
--- a/common/cmd_reginfo.c
+++ b/common/cmd_reginfo.c
@@ -90,7 +90,7 @@ int do_reginfo (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 	 */
 
 /* DBU[dave@cray.com]   For the CRAY-L1, but should be generically 405gp */
-#elif defined (CONFIG_405GP)
+#elif defined (CONFIG_405GP) || defined(CONFIG_405EP)
 	printf("\n405GP registers; MSR=%x\n",mfmsr());
 		printf ("\nUniversal Interrupt Controller Regs\n"
 "uicsr    uicsrs   uicer    uiccr    uicpr    uictr    uicmsr   uicvr    uicvcr"
diff --git a/cpu/ppc4xx/405gp_enet.c b/cpu/ppc4xx/405gp_enet.c
index 49e9e42..af3c1b7 100644
--- a/cpu/ppc4xx/405gp_enet.c
+++ b/cpu/ppc4xx/405gp_enet.c
@@ -80,7 +80,7 @@
 #include <malloc.h>
 #include "vecnum.h"
 
-#if defined(CONFIG_405GP) || defined(CONFIG_440)
+#if defined(CONFIG_405GP) || defined(CONFIG_440) || defined(CONFIG_405EP)
 
 #define EMAC_RESET_TIMEOUT 1000	/* 1000 ms reset timeout */
 #define PHY_AUTONEGOTIATE_TIMEOUT 2000	/* 2000 ms autonegotiate timeout */
@@ -705,7 +705,7 @@ void mal_err (unsigned long isr, unsigned long uic, unsigned long maldef,
 	mtdcr (maltxdeir, 0xC0000000);
 	mtdcr (malrxdeir, 0x80000000);
 
-#if 1	/*sr */
+#ifdef INFO_405_ENET
 	printf ("\nMAL error occured.... ISR = %lx UIC = = %lx  MAL_DEF = %lx  MAL_ERR= %lx \n",
 		isr, uic, maldef, mal_errr);
 #else
@@ -716,7 +716,7 @@ void mal_err (unsigned long isr, unsigned long uic, unsigned long maldef,
 	 */
 	printf ("M");			/* just to see something upon mal error */
 #endif
-#endif	/*sr */
+#endif
 
 	eth_init (bis_save);		/* start again... */
 }
diff --git a/cpu/ppc4xx/405gp_pci.c b/cpu/ppc4xx/405gp_pci.c
index fbd4d6d..7289523 100644
--- a/cpu/ppc4xx/405gp_pci.c
+++ b/cpu/ppc4xx/405gp_pci.c
@@ -78,7 +78,7 @@
 #include <asm/processor.h>
 #include <pci.h>
 
-#if defined(CONFIG_405GP)
+#if defined(CONFIG_405GP) || defined(CONFIG_405EP)
 
 #ifdef CONFIG_PCI
 
diff --git a/cpu/ppc4xx/cpu.c b/cpu/ppc4xx/cpu.c
index 8532d28..095a0aa 100644
--- a/cpu/ppc4xx/cpu.c
+++ b/cpu/ppc4xx/cpu.c
@@ -48,17 +48,24 @@ static int do_chip_reset( unsigned long sys0, unsigned long sys1 );
 
 int checkcpu (void)
 {
-#if defined(CONFIG_405GP) || defined(CONFIG_405CR) || defined(CONFIG_IOP480) || defined(CONFIG_440)
+#if defined(CONFIG_405GP) || \
+    defined(CONFIG_405CR) || \
+    defined(CONFIG_IOP480) || \
+    defined(CONFIG_440) || \
+    defined(CONFIG_405EP)
 	uint pvr = get_pvr();
 #endif
-#if defined(CONFIG_405GP) || defined(CONFIG_405CR) || defined(CONFIG_IOP480)
+#if defined(CONFIG_405GP) || \
+    defined(CONFIG_405CR) || \
+    defined(CONFIG_IOP480) || \
+    defined(CONFIG_405EP)
 	DECLARE_GLOBAL_DATA_PTR;
 
 	ulong clock = gd->cpu_clk;
 	char buf[32];
 #endif
 
-#if defined(CONFIG_405GP) || defined(CONFIG_405CR)
+#if defined(CONFIG_405GP) || defined(CONFIG_405CR) || defined(CONFIG_405EP)
 	PPC405_SYS_INFO sys_info;
 
 	puts ("CPU:   ");
@@ -75,6 +82,9 @@ int checkcpu (void)
 #if CONFIG_405CR
 	puts("IBM PowerPC 405CR Rev. ");
 #endif
+#if CONFIG_405EP
+	puts("IBM PowerPC 405EP Rev. ");
+#endif
 	switch (pvr) {
 	case PVR_405GP_RB:
 	case PVR_405GPR_RB:
@@ -98,6 +108,7 @@ int checkcpu (void)
 		putc('A');
 		break;
 	case PVR_405CR_RB:
+	case PVR_405EP_RB:
 		putc('B');
 		break;
 	default:
@@ -110,7 +121,7 @@ int checkcpu (void)
 	       sys_info.freqPLB / sys_info.pllOpbDiv / 1000000,
 	       sys_info.freqPLB / sys_info.pllExtBusDiv / 1000000);
 
-#if CONFIG_405GP
+#if defined(CONFIG_405GP)
 	if (mfdcr(strap) & PSR_PCI_ASYNC_EN)
 		printf("           PCI async ext clock used, ");
 	else
@@ -120,15 +131,27 @@ int checkcpu (void)
 		printf("internal PCI arbiter enabled\n");
 	else
 		printf("external PCI arbiter enabled\n");
+#elif defined(CONFIG_405EP)
+	if (mfdcr(cpc0_boot) & CPC0_BOOT_SEP)
+		printf("           IIC Boot EEPROM enabled\n");
+	else
+		printf("           IIC Boot EEPROM disabled\n");
+	printf("           PCI async ext clock used, ");
+	if (mfdcr(cpc0_pci) & CPC0_PCI_ARBIT_EN)
+		printf("internal PCI arbiter enabled\n");
+	else
+		printf("external PCI arbiter enabled\n");
 #endif
 
+#if defined(CONFIG_405EP)
+	printf("           16 kB I-Cache 16 kB D-Cache");
+#else
 	if ((pvr | 0x00000001) == PVR_405GPR_RB) {
 		printf("           16 kB I-Cache 16 kB D-Cache");
 	} else {
 		printf("           16 kB I-Cache 8 kB D-Cache");
 	}
-
-
+#endif
 #endif  /* defined(CONFIG_405GP) || defined(CONFIG_405CR) */
 
 #ifdef CONFIG_IOP480
@@ -213,7 +236,10 @@ unsigned long get_tbclk (void)
 	get_sys_info(&sys_info);
 	return (sys_info.freqProcessor);
 
-#elif defined(CONFIG_405GP) || defined(CONFIG_405CR) || defined(CONFIG_405)
+#elif defined(CONFIG_405GP) || \
+      defined(CONFIG_405CR) || \
+      defined(CONFIG_405) || \
+      defined(CONFIG_405EP)
 
 	PPC405_SYS_INFO sys_info;
 
diff --git a/cpu/ppc4xx/cpu_init.c b/cpu/ppc4xx/cpu_init.c
index 1d149bc..ac34092 100644
--- a/cpu/ppc4xx/cpu_init.c
+++ b/cpu/ppc4xx/cpu_init.c
@@ -40,6 +40,24 @@
 void
 cpu_init_f (void)
 {
+#if defined(CONFIG_405EP)
+	/*
+	 * GPIO0 setup (select GPIO or alternate function)
+	 */
+	out32(GPIO0_OSRH, CFG_GPIO0_OSRH);   /* output select */
+	out32(GPIO0_OSRL, CFG_GPIO0_OSRL);
+	out32(GPIO0_ISR1H, CFG_GPIO0_ISR1H); /* input select */
+	out32(GPIO0_ISR1L, CFG_GPIO0_ISR1L);
+	out32(GPIO0_TSRH, CFG_GPIO0_TSRH);   /* three-state select */
+	out32(GPIO0_TSRL, CFG_GPIO0_TSRL);
+	out32(GPIO0_TCR, CFG_GPIO0_TCR);     /* enable output driver for outputs */
+
+	/*
+	 * Set EMAC noise filter bits
+	 */
+	mtdcr(cpc0_epctl, CPC0_EPRCSR_E0NFE | CPC0_EPRCSR_E1NFE);
+#endif /* CONFIG_405EP */
+
 	/*
 	 * External Bus Controller (EBC) Setup
 	 */
@@ -119,12 +137,14 @@ cpu_init_f (void)
  */
 int cpu_init_r (void)
 {
-#ifdef CONFIG_405GP
+#if defined(CONFIG_405GP)  || defined(CONFIG_405EP)
 	DECLARE_GLOBAL_DATA_PTR;
 
 	bd_t *bd = gd->bd;
 	unsigned long reg;
+#if defined(CONFIG_405GP)
 	uint pvr = get_pvr();
+#endif
 
 	/*
 	 * Write Ethernetaddress into on-chip register
@@ -145,6 +165,7 @@ int cpu_init_r (void)
 	reg |= bd->bi_enetaddr[5];
 	out32 (EMAC_IAL, reg);
 
+#if defined(CONFIG_405GP)
 	/*
 	 * Set edge conditioning circuitry on PPC405GPr
 	 * for compatibility to existing PPC405GP designs.
@@ -152,7 +173,7 @@ int cpu_init_r (void)
 	if ((pvr & 0xfffffff0) == (PVR_405GPR_RB & 0xfffffff0)) {
 		mtdcr(ecr, 0x60606000);
 	}
-
-#endif  /* CONFIG_405GP */
+#endif  /* defined(CONFIG_405GP) */
+#endif  /* defined(CONFIG_405GP) || defined(CONFIG_405EP) */
 	return (0);
 }
diff --git a/cpu/ppc4xx/miiphy.c b/cpu/ppc4xx/miiphy.c
index 51ba471..c5a90a9 100644
--- a/cpu/ppc4xx/miiphy.c
+++ b/cpu/ppc4xx/miiphy.c
@@ -48,7 +48,7 @@
 #include <405_mal.h>
 #include <miiphy.h>
 
-#if defined(CONFIG_405GP) || defined(CONFIG_440)
+#if defined(CONFIG_405GP) || defined(CONFIG_440) || defined(CONFIG_405EP)
 
 
 /***********************************************************/
diff --git a/cpu/ppc4xx/spd_sdram.c b/cpu/ppc4xx/spd_sdram.c
index 9c1cac5..76aee2e 100644
--- a/cpu/ppc4xx/spd_sdram.c
+++ b/cpu/ppc4xx/spd_sdram.c
@@ -118,9 +118,11 @@ long int spd_sdram(int(read_spd)(uint addr))
 	int bank_cnt;
 
 	int sdram0_pmit=0x07c00000;
+#ifndef CONFIG_405EP /* not on PPC405EP */
 	int sdram0_besr0=-1;
 	int sdram0_besr1=-1;
 	int sdram0_eccesr=-1;
+#endif
 	int sdram0_ecccfg;
 
 	int sdram0_rtr=0;
@@ -153,8 +155,46 @@ long int spd_sdram(int(read_spd)(uint addr))
 	 * Calculate the bus period, we do it this
 	 * way to minimize stack utilization.
 	 */
+#ifndef CONFIG_405EP
     	tmp = (mfdcr(pllmd) >> (31-6)) & 0xf;	/* get FBDV bits */
 	tmp = CONFIG_SYS_CLK_FREQ * tmp;	/* get plb freq */
+#else
+	{
+		unsigned long freqCPU;
+		unsigned long pllmr0;
+		unsigned long pllmr1;
+		unsigned long pllFbkDiv;
+		unsigned long pllPlbDiv;
+		unsigned long pllmr0_ccdv;
+
+		/*
+		 * Read PLL Mode registers
+		 */
+		pllmr0 = mfdcr (cpc0_pllmr0);
+		pllmr1 = mfdcr (cpc0_pllmr1);
+
+		pllFbkDiv = ((pllmr1 & PLLMR1_FBMUL_MASK) >> 20);
+		if (pllFbkDiv == 0) {
+			pllFbkDiv = 16;
+		}
+		pllPlbDiv = ((pllmr0 & PLLMR0_CPU_TO_PLB_MASK) >> 16) + 1;
+
+		/*
+		 * Determine CPU clock frequency
+		 */
+		pllmr0_ccdv = ((pllmr0 & PLLMR0_CPU_DIV_MASK) >> 20) + 1;
+		if (pllmr1 & PLLMR1_SSCS_MASK) {
+			freqCPU = (CONFIG_SYS_CLK_FREQ * pllFbkDiv) / pllmr0_ccdv;
+		} else {
+			freqCPU = CONFIG_SYS_CLK_FREQ / pllmr0_ccdv;
+		}
+
+		/*
+		 * Determine PLB clock frequency
+		 */
+		tmp = freqCPU / pllPlbDiv;
+	}
+#endif
 	bus_period = sdram_HZ_to_ns(tmp);	/* get sdram speed */
 
      	/* Make shure we are using SDRAM */
@@ -414,8 +454,12 @@ long int spd_sdram(int(read_spd)(uint addr))
 	sdram0_cfg = 0;
 	mtsdram0( mem_mcopt1, sdram0_cfg );
 
+#ifndef CONFIG_405EP /* not on PPC405EP */
 	mtsdram0( mem_besra , sdram0_besr0 );
 	mtsdram0( mem_besrb , sdram0_besr1 );
+	mtsdram0( mem_ecccf , sdram0_ecccfg );
+	mtsdram0( mem_eccerr, sdram0_eccesr );
+#endif
 	mtsdram0( mem_rtr   , sdram0_rtr );
 	mtsdram0( mem_pmit  , sdram0_pmit );
 	mtsdram0( mem_mb0cf , sdram0_b0cr );
@@ -423,8 +467,6 @@ long int spd_sdram(int(read_spd)(uint addr))
 	mtsdram0( mem_mb2cf , sdram0_b2cr );
 	mtsdram0( mem_mb3cf , sdram0_b3cr );
 	mtsdram0( mem_sdtr1 , sdram0_tr );
-	mtsdram0( mem_ecccf , sdram0_ecccfg );
-	mtsdram0( mem_eccerr, sdram0_eccesr );
 
 	/* SDRAM have a power on delay,  500 micro should do */
 	udelay(500);
diff --git a/cpu/ppc4xx/speed.c b/cpu/ppc4xx/speed.c
index f075e3a..fdefbb6 100644
--- a/cpu/ppc4xx/speed.c
+++ b/cpu/ppc4xx/speed.c
@@ -257,11 +257,132 @@ void get_sys_info (sys_info_t * sysInfo) {
 
 }
 
+#elif defined(CONFIG_405EP)
+void get_sys_info (PPC405_SYS_INFO * sysInfo)
+{
+	unsigned long pllmr0;
+	unsigned long pllmr1;
+	unsigned long sysClkPeriodPs = ONE_BILLION / (CONFIG_SYS_CLK_FREQ / 1000);
+	unsigned long m;
+	unsigned long pllmr0_ccdv;
+
+	/*
+	 * Read PLL Mode registers
+	 */
+	pllmr0 = mfdcr (cpc0_pllmr0);
+	pllmr1 = mfdcr (cpc0_pllmr1);
+
+	/*
+	 * Determine forward divider A
+	 */
+	sysInfo->pllFwdDiv = 8 - ((pllmr1 & PLLMR1_FWDVA_MASK) >> 16);
+
+	/*
+	 * Determine forward divider B (should be equal to A)
+	 */
+	sysInfo->pllFwdDivB = 8 - ((pllmr1 & PLLMR1_FWDVB_MASK) >> 12);
+
+	/*
+	 * Determine FBK_DIV.
+	 */
+	sysInfo->pllFbkDiv = ((pllmr1 & PLLMR1_FBMUL_MASK) >> 20);
+	if (sysInfo->pllFbkDiv == 0) {
+		sysInfo->pllFbkDiv = 16;
+	}
+
+	/*
+	 * Determine PLB_DIV.
+	 */
+	sysInfo->pllPlbDiv = ((pllmr0 & PLLMR0_CPU_TO_PLB_MASK) >> 16) + 1;
+
+	/*
+	 * Determine PCI_DIV.
+	 */
+	sysInfo->pllPciDiv = (pllmr0 & PLLMR0_PCI_TO_PLB_MASK) + 1;
+
+	/*
+	 * Determine EXTBUS_DIV.
+	 */
+	sysInfo->pllExtBusDiv = ((pllmr0 & PLLMR0_EXB_TO_PLB_MASK) >> 8) + 2;
+
+	/*
+	 * Determine OPB_DIV.
+	 */
+	sysInfo->pllOpbDiv = ((pllmr0 & PLLMR0_OPB_TO_PLB_MASK) >> 12) + 1;
+
+	/*
+	 * Determine the M factor
+	 */
+	m = sysInfo->pllFbkDiv * sysInfo->pllFwdDivB;
+
+	/*
+	 * Determine VCO clock frequency
+	 */
+	sysInfo->freqVCOMhz = (1000000 * m) / sysClkPeriodPs;
+
+	/*
+	 * Determine CPU clock frequency
+	 */
+	pllmr0_ccdv = ((pllmr0 & PLLMR0_CPU_DIV_MASK) >> 20) + 1;
+	if (pllmr1 & PLLMR1_SSCS_MASK) {
+		sysInfo->freqProcessor = (CONFIG_SYS_CLK_FREQ * sysInfo->pllFbkDiv)
+			/ pllmr0_ccdv;
+	} else {
+		sysInfo->freqProcessor = CONFIG_SYS_CLK_FREQ / pllmr0_ccdv;
+	}
+
+	/*
+	 * Determine PLB clock frequency
+	 */
+	sysInfo->freqPLB = sysInfo->freqProcessor / sysInfo->pllPlbDiv;
+
+	if (!((sysInfo->freqVCOMhz >= VCO_MIN) && (sysInfo->freqVCOMhz <= VCO_MAX))) {
+		printf ("\nInvalid VCO frequency calculated :  %ld MHz \a\n",
+			sysInfo->freqVCOMhz);
+		printf ("It must be between %d-%d MHz \a\n", VCO_MIN, VCO_MAX);
+		printf ("PLL Mode reg 0           :  %8.8lx\a\n", pllmr0);
+		printf ("PLL Mode reg 1           :  %8.8lx\a\n", pllmr1);
+		hang ();
+	}
+}
+
+
+/********************************************
+ * get_OPB_freq
+ * return OPB bus freq in Hz
+ *********************************************/
+ulong get_OPB_freq (void)
+{
+	ulong val = 0;
+
+	PPC405_SYS_INFO sys_info;
+
+	get_sys_info (&sys_info);
+	val = sys_info.freqPLB / sys_info.pllOpbDiv;
+
+	return val;
+}
+
+
+/********************************************
+ * get_PCI_freq
+ * return PCI bus freq in Hz
+ *********************************************/
+ulong get_PCI_freq (void)
+{
+	ulong val;
+	PPC405_SYS_INFO sys_info;
+
+	get_sys_info (&sys_info);
+	val = sys_info.freqPLB / sys_info.pllPciDiv;
+	return val;
+}
+
 #endif
 
 int get_clocks (void)
 {
-#if defined(CONFIG_405GP) || defined(CONFIG_405CR) || defined(CONFIG_440) || defined(CONFIG_405)
+#if defined(CONFIG_405GP) || defined(CONFIG_405CR) || defined(CONFIG_440) || defined(CONFIG_405) || defined(CONFIG_405EP)
 	DECLARE_GLOBAL_DATA_PTR;
 
 	sys_info_t sys_info;
@@ -290,7 +411,7 @@ ulong get_bus_freq (ulong dummy)
 {
 	ulong val;
 
-#if defined(CONFIG_405GP) || defined(CONFIG_405CR) || defined(CONFIG_405) || defined(CONFIG_440)
+#if defined(CONFIG_405GP) || defined(CONFIG_405CR) || defined(CONFIG_405) || defined(CONFIG_440) || defined(CONFIG_405EP)
 	sys_info_t sys_info;
 
 	get_sys_info (&sys_info);
diff --git a/cpu/ppc4xx/start.S b/cpu/ppc4xx/start.S
index c334f93..afe8635 100644
--- a/cpu/ppc4xx/start.S
+++ b/cpu/ppc4xx/start.S
@@ -297,7 +297,7 @@ _start_440:
 	mflr	r1
 	mtspr	srr0,r1
 	rfi
-#endif
+#endif /* CONFIG_440 */
 
 /*
  * r3 - 1st arg to board_init(): IMMP pointer
@@ -504,7 +504,7 @@ _start:
 #endif	/* CONFIG_IOP480 */
 
 /*****************************************************************************/
-#if defined(CONFIG_405GP) || defined(CONFIG_405CR) || defined(CONFIG_405)
+#if defined(CONFIG_405GP) || defined(CONFIG_405CR) || defined(CONFIG_405) || defined(CONFIG_405EP)
 	/*----------------------------------------------------------------------- */
 	/* Clear and set up some registers. */
 	/*----------------------------------------------------------------------- */
@@ -551,6 +551,17 @@ _start:
 	bl	ext_bus_cntlr_init
 #endif
 
+#if defined(CONFIG_405EP)
+	/*----------------------------------------------------------------------- */
+	/* DMA Status, clear to come up clean */
+	/*----------------------------------------------------------------------- */
+        addis   r3,r0, 0xFFFF         /* Clear all existing DMA status */
+        ori     r3,r3, 0xFFFF
+        mtdcr   dmasr, r3
+
+	bl	ppc405ep_init         /* do ppc405ep specific init */
+#endif /* CONFIG_405EP */
+
 #if defined(CFG_OCM_DATA_ADDR) && defined(CFG_OCM_DATA_SIZE)
 	/********************************************************************
 	 * Setup OCM - On Chip Memory
@@ -693,6 +704,7 @@ _start:
 #endif	/* CONFIG_405GP || CONFIG_405CR */
 
 
+/*****************************************************************************/
 	.globl	_start_of_vectors
 _start_of_vectors:
 
@@ -1437,3 +1449,164 @@ trap_reloc:
 	stw	r0, 4(r7)
 
 	blr
+
+
+/**************************************************************************/
+/* PPC405EP specific stuff                                                */
+/**************************************************************************/
+#ifdef CONFIG_405EP
+ppc405ep_init:
+        /*
+        !-----------------------------------------------------------------------
+        ! Check FPGA for PCI internal/external arbitration
+        !   If board is set to internal arbitration, update cpc0_pci
+        !-----------------------------------------------------------------------
+	*/
+        addi    r3,0,CPC0_PCI_HOST_CFG_EN
+#ifdef CONFIG_BUBINGA405EP
+        addis   r5,r0,FPGA_REG1@h      /* set offset for FPGA_REG1 */
+        ori     r5,r5,FPGA_REG1@l
+        lbz     r5,0x0(r5)              /* read to get PCI arb selection */
+        andi.   r6,r5,FPGA_REG1_PCI_INT_ARB  /* using internal arbiter ?*/
+        beq     ..pci_cfg_set             /* if not set, then bypass reg write*/
+#endif
+        ori     r3,r3,CPC0_PCI_ARBIT_EN
+..pci_cfg_set:
+        mtdcr   CPC0_PCI, r3             /* Enable internal arbiter*/
+
+        /*
+        !-----------------------------------------------------------------------
+        ! Check to see if chip is in bypass mode.
+        ! If so, write stored CPC0_PLLMR0 and CPC0_PLLMR1 values and perform a
+        ! CPU reset   Otherwise, skip this step and keep going.
+        ! Note:  Running BIOS in bypass mode is not supported since PLB speed
+        !        will not be fast enough for the SDRAM (min 66MHz)
+        !-----------------------------------------------------------------------
+	*/
+        mfdcr   r5, CPC0_PLLMR1
+        rlwinm  r4,r5,1,0x1            /* get system clock source (SSCS) */
+        cmpi    cr0,0,r4,0x1
+
+        beq    pll_done                   /* if SSCS =b'1' then PLL has */
+                                          /* already been set */
+                                          /* and CPU has been reset */
+                                          /* so skip to next section */
+
+#ifdef CONFIG_BUBINGA405EP
+	/*
+        !-----------------------------------------------------------------------
+        ! Read NVRAM to get value to write in PLLMR.
+        ! If value has not been correctly saved, write default value
+        ! Default config values (assuming on-board 33MHz SYS_CLK) are above.
+        ! See CPU_DEFAULT_200 and CPU_DEFAULT_266 above.
+        !
+        ! WARNING:  This code assumes the first three words in the nvram_t
+        !           structure in openbios.h.  Changing the beginning of
+        !           the structure will break this code.
+        !
+        !-----------------------------------------------------------------------
+	*/
+        addis   r3,0,NVRAM_BASE@h
+        addi    r3,r3,NVRAM_BASE@l
+
+        lwz     r4, 0(r3)
+        addis   r5,0,NVRVFY1@h
+        addi    r5,r5,NVRVFY1@l
+        cmp     cr0,0,r4,r5            /* Compare 1st NVRAM Magic number*/
+        bne     ..no_pllset
+        addi    r3,r3,4
+        lwz     r4, 0(r3)
+        addis   r5,0,NVRVFY2@h
+        addi    r5,r5,NVRVFY2@l
+        cmp     cr0,0,r4,r5            /* Compare 2 NVRAM Magic number */
+        bne     ..no_pllset
+        addi    r3,r3,8                 /* Skip over conf_size */
+        lwz     r4, 4(r3)               /* Load PLLMR1 value from NVRAM */
+        lwz     r3, 0(r3)               /* Load PLLMR0 value from NVRAM */
+        rlwinm  r5,r4,1,0x1             /* get system clock source (SSCS) */
+        cmpi     cr0,0,r5,1             /* See if PLL is locked */
+        beq     pll_write
+..no_pllset:
+#endif /* CONFIG_BUBINGA405EP */
+
+        addis   r3,0,PLLMR0_DEFAULT@h       /* PLLMR0 default value */
+        ori     r3,r3,PLLMR0_DEFAULT@l     /* */
+        addis   r4,0,PLLMR1_DEFAULT@h       /* PLLMR1 default value */
+        ori     r4,r4,PLLMR1_DEFAULT@l     /* */
+
+        b       pll_write                 /* Write the CPC0_PLLMR with new value */
+
+pll_done:
+        /*
+        !-----------------------------------------------------------------------
+        ! Clear Soft Reset Register
+        ! This is needed to enable PCI if not booting from serial EPROM
+        !-----------------------------------------------------------------------
+		*/
+        addi    r3, 0, 0x0
+        mtdcr   CPC0_SRR, r3
+
+        addis    r3,0,0x0010
+        mtctr   r3
+pci_wait:
+        bdnz    pci_wait
+
+	blr				  /* return to main code */
+
+/*
+!-----------------------------------------------------------------------------
+! Function:     pll_write
+! Description:  Updates the value of the CPC0_PLLMR according to CMOS27E documentation
+!               That is:
+!                         1.  Pll is first disabled (de-activated by putting in bypass mode)
+!                         2.  PLL is reset
+!                         3.  Clock dividers are set while PLL is held in reset and bypassed
+!                         4.  PLL Reset is cleared
+!                         5.  Wait 100us for PLL to lock
+!                         6.  A core reset is performed
+! Input: r3 = Value to write to CPC0_PLLMR0
+! Input: r4 = Value to write to CPC0_PLLMR1
+! Output r3 = none
+!-----------------------------------------------------------------------------
+*/
+pll_write:
+        mfdcr  r5, CPC0_UCR
+        andis. r5,r5,0xFFFF
+        ori    r5,r5,0x0101              /* Stop the UART clocks */
+        mtdcr  CPC0_UCR,r5               /* Before changing PLL */
+
+        mfdcr  r5, CPC0_PLLMR1
+        rlwinm r5,r5,0,0x7FFFFFFF        /* Disable PLL */
+        mtdcr   CPC0_PLLMR1,r5
+        oris   r5,r5,0x4000              /* Set PLL Reset */
+        mtdcr   CPC0_PLLMR1,r5
+
+        mtdcr   CPC0_PLLMR0,r3           /* Set clock dividers */
+        rlwinm r5,r4,0,0x3FFFFFFF        /* Reset & Bypass new PLL dividers */
+        oris   r5,r5,0x4000              /* Set PLL Reset */
+        mtdcr   CPC0_PLLMR1,r5           /* Set clock dividers */
+        rlwinm r5,r5,0,0xBFFFFFFF        /* Clear PLL Reset */
+        mtdcr   CPC0_PLLMR1,r5
+
+		/*
+        ! Wait min of 100us for PLL to lock.
+        ! See CMOS 27E databook for more info.
+        ! At 200MHz, that means waiting 20,000 instructions
+		 */
+        addi    r3,0,20000              /* 2000 = 0x4e20 */
+        mtctr   r3
+pll_wait:
+        bdnz    pll_wait
+
+        oris   r5,r5,0x8000             /* Enable PLL */
+        mtdcr   CPC0_PLLMR1,r5          /* Engage */
+
+        /*
+         * Reset CPU to guarantee timings are OK
+         * Not sure if this is needed...
+ 	 */
+        addis r3,0,0x1000
+        mtspr dbcr0,r3               /* This will cause a CPU core reset, and */
+                                     /* execution will continue from the poweron */
+                                     /* vector of 0xfffffffc */
+#endif /* CONFIG_405EP */
diff --git a/include/asm-ppc/processor.h b/include/asm-ppc/processor.h
index dc04a8f..9c88b49 100644
--- a/include/asm-ppc/processor.h
+++ b/include/asm-ppc/processor.h
@@ -465,6 +465,7 @@
 #define	PVR_405GPR_RB	0x50910951
 #define	PVR_440GP_RB	0x40120440
 #define	PVR_440GP_RC	0x40120481
+#define	PVR_405EP_RB	0x51210950
 #define	PVR_601		0x00010000
 #define	PVR_602		0x00050000
 #define	PVR_603		0x00030000
diff --git a/include/asm-ppc/u-boot.h b/include/asm-ppc/u-boot.h
index 5e8f4b5..db563a5 100644
--- a/include/asm-ppc/u-boot.h
+++ b/include/asm-ppc/u-boot.h
@@ -57,7 +57,8 @@ typedef struct bd_info {
 #if defined(CONFIG_405GP) || \
     defined(CONFIG_405CR) || \
     defined(CONFIG_440)   || \
-    defined(CONFIG_405)
+    defined(CONFIG_405)   || \
+    defined(CONFIG_405EP)
 	unsigned char	bi_s_version[4];	/* Version of this structure */
 	unsigned char	bi_r_version[32];	/* Version of the ROM (IBM) */
 	unsigned int	bi_procfreq;	/* CPU (Internal) Freq, in Hz */
diff --git a/include/cmd_reginfo.h b/include/cmd_reginfo.h
index 6a67b36..8d71e7e 100644
--- a/include/cmd_reginfo.h
+++ b/include/cmd_reginfo.h
@@ -24,7 +24,7 @@
 #ifndef	_CMD_REGINFO_H_
 #define	_CMD_REGINFO_H_
 
-#if (defined(CONFIG_5xx) || defined(CONFIG_8xx) || defined(CONFIG_405GP)) && \
+#if (defined(CONFIG_5xx) || defined(CONFIG_8xx) || defined(CONFIG_405GP) || defined(CONFIG_405EP)) && \
     (CONFIG_COMMANDS & CFG_CMD_REGINFO)
 #define	CMD_TBL_REGINFO	MK_CMD_TBL_ENTRY(					\
 	"reginfo",	3,	2,	1,	do_reginfo,			\
diff --git a/include/ppc405.h b/include/ppc405.h
index c99d591..243a22d 100644
--- a/include/ppc405.h
+++ b/include/ppc405.h
@@ -151,11 +151,13 @@
 #define memcfga  (SDRAM_DCR_BASE+0x0)   /* Memory configuration address reg  */
 #define memcfgd  (SDRAM_DCR_BASE+0x1)   /* Memory configuration data    reg  */
   /* values for memcfga register - indirect addressing of these regs */
+#ifndef CONFIG_405EP
   #define mem_besra   0x00    /* bus error syndrome reg a	     */
   #define mem_besrsa  0x04    /* bus error syndrome reg set a	     */
   #define mem_besrb   0x08    /* bus error syndrome reg b	     */
   #define mem_besrsb  0x0c    /* bus error syndrome reg set b	     */
   #define mem_bear    0x10    /* bus error address reg		     */
+#endif
   #define mem_mcopt1  0x20    /* memory controller options 1	     */
   #define mem_rtr     0x30    /* refresh timer reg		     */
   #define mem_pmit    0x34    /* power management idle timer	     */
@@ -164,8 +166,10 @@
   #define mem_mb2cf   0x48    /* memory bank 2 configuration	     */
   #define mem_mb3cf   0x4c    /* memory bank 3 configuration	     */
   #define mem_sdtr1   0x80    /* timing reg 1			     */
+#ifndef CONFIG_405EP
   #define mem_ecccf   0x94    /* ECC configuration		     */
   #define mem_eccerr  0x98    /* ECC error status		     */
+#endif
 
 /******************************************************************************
  * Decompression Controller
@@ -227,6 +231,255 @@
   #define pbesr1      0x22    /* periph bus error status reg 1       */
   #define epcr        0x23    /* external periph control reg         */
 
+#ifdef CONFIG_405EP
+/******************************************************************************
+ * Control
+ ******************************************************************************/
+#define CNTRL_DCR_BASE 0x0f0
+#define cpc0_pllmr0   (CNTRL_DCR_BASE+0x0)  /* PLL mode  register 0                */
+#define cpc0_boot     (CNTRL_DCR_BASE+0x1)  /* Clock status register               */
+#define cpc0_epctl    (CNTRL_DCR_BASE+0x3)  /* EMAC to PHY control register        */
+#define cpc0_pllmr1   (CNTRL_DCR_BASE+0x4)  /* PLL mode  register 1                */
+#define cpc0_ucr      (CNTRL_DCR_BASE+0x5)  /* UART control register               */
+#define cpc0_pci      (CNTRL_DCR_BASE+0x9)  /* PCI control register                */
+
+#define CPC0_PLLMR0  (CNTRL_DCR_BASE+0x0)  /* PLL mode 0 register          */
+#define CPC0_BOOT    (CNTRL_DCR_BASE+0x1)  /* Chip Clock Status register   */
+#define CPC0_CR1     (CNTRL_DCR_BASE+0x2)  /* Chip Control 1 register      */
+#define CPC0_EPRCSR  (CNTRL_DCR_BASE+0x3)  /* EMAC PHY Rcv Clk Src register*/
+#define CPC0_PLLMR1  (CNTRL_DCR_BASE+0x4)  /* PLL mode 1 register          */
+#define CPC0_UCR     (CNTRL_DCR_BASE+0x5)  /* UART Control register        */
+#define CPC0_SRR     (CNTRL_DCR_BASE+0x6)  /* Soft Reset register          */
+#define CPC0_JTAGID  (CNTRL_DCR_BASE+0x7)  /* JTAG ID register             */
+#define CPC0_SPARE   (CNTRL_DCR_BASE+0x8)  /* Spare DCR                    */
+#define CPC0_PCI     (CNTRL_DCR_BASE+0x9)  /* PCI Control register         */
+
+/* Bit definitions */
+#define PLLMR0_CPU_DIV_MASK      0x00300000     /* CPU clock divider */
+#define PLLMR0_CPU_DIV_BYPASS    0x00000000
+#define PLLMR0_CPU_DIV_2         0x00100000
+#define PLLMR0_CPU_DIV_3         0x00200000
+#define PLLMR0_CPU_DIV_4         0x00300000
+
+#define PLLMR0_CPU_TO_PLB_MASK   0x00030000     /* CPU:PLB Frequency Divisor */
+#define PLLMR0_CPU_PLB_DIV_1     0x00000000
+#define PLLMR0_CPU_PLB_DIV_2     0x00010000
+#define PLLMR0_CPU_PLB_DIV_3     0x00020000
+#define PLLMR0_CPU_PLB_DIV_4     0x00030000
+
+#define PLLMR0_OPB_TO_PLB_MASK   0x00003000     /* OPB:PLB Frequency Divisor */
+#define PLLMR0_OPB_PLB_DIV_1     0x00000000
+#define PLLMR0_OPB_PLB_DIV_2     0x00001000
+#define PLLMR0_OPB_PLB_DIV_3     0x00002000
+#define PLLMR0_OPB_PLB_DIV_4     0x00003000
+
+#define PLLMR0_EXB_TO_PLB_MASK   0x00000300     /* External Bus:PLB Divisor  */
+#define PLLMR0_EXB_PLB_DIV_2     0x00000000
+#define PLLMR0_EXB_PLB_DIV_3     0x00000100
+#define PLLMR0_EXB_PLB_DIV_4     0x00000200
+#define PLLMR0_EXB_PLB_DIV_5     0x00000300
+
+#define PLLMR0_MAL_TO_PLB_MASK   0x00000030     /* MAL:PLB Divisor  */
+#define PLLMR0_MAL_PLB_DIV_1     0x00000000
+#define PLLMR0_MAL_PLB_DIV_2     0x00000010
+#define PLLMR0_MAL_PLB_DIV_3     0x00000020
+#define PLLMR0_MAL_PLB_DIV_4     0x00000030
+
+#define PLLMR0_PCI_TO_PLB_MASK   0x00000003     /* PCI:PLB Frequency Divisor */
+#define PLLMR0_PCI_PLB_DIV_1     0x00000000
+#define PLLMR0_PCI_PLB_DIV_2     0x00000001
+#define PLLMR0_PCI_PLB_DIV_3     0x00000002
+#define PLLMR0_PCI_PLB_DIV_4     0x00000003
+
+#define PLLMR1_SSCS_MASK         0x80000000     /* Select system clock source */
+#define PLLMR1_PLLR_MASK         0x40000000     /* PLL reset */
+#define PLLMR1_FBMUL_MASK        0x00F00000     /* PLL feedback multiplier value */
+#define PLLMR1_FBMUL_DIV_16      0x00000000
+#define PLLMR1_FBMUL_DIV_1       0x00100000
+#define PLLMR1_FBMUL_DIV_2       0x00200000
+#define PLLMR1_FBMUL_DIV_3       0x00300000
+#define PLLMR1_FBMUL_DIV_4       0x00400000
+#define PLLMR1_FBMUL_DIV_5       0x00500000
+#define PLLMR1_FBMUL_DIV_6       0x00600000
+#define PLLMR1_FBMUL_DIV_7       0x00700000
+#define PLLMR1_FBMUL_DIV_8       0x00800000
+#define PLLMR1_FBMUL_DIV_9       0x00900000
+#define PLLMR1_FBMUL_DIV_10      0x00A00000
+#define PLLMR1_FBMUL_DIV_11      0x00B00000
+#define PLLMR1_FBMUL_DIV_12      0x00C00000
+#define PLLMR1_FBMUL_DIV_13      0x00D00000
+#define PLLMR1_FBMUL_DIV_14      0x00E00000
+#define PLLMR1_FBMUL_DIV_15      0x00F00000
+
+#define PLLMR1_FWDVA_MASK        0x00070000     /* PLL forward divider A value */
+#define PLLMR1_FWDVA_DIV_8       0x00000000
+#define PLLMR1_FWDVA_DIV_7       0x00010000
+#define PLLMR1_FWDVA_DIV_6       0x00020000
+#define PLLMR1_FWDVA_DIV_5       0x00030000
+#define PLLMR1_FWDVA_DIV_4       0x00040000
+#define PLLMR1_FWDVA_DIV_3       0x00050000
+#define PLLMR1_FWDVA_DIV_2       0x00060000
+#define PLLMR1_FWDVA_DIV_1       0x00070000
+#define PLLMR1_FWDVB_MASK        0x00007000     /* PLL forward divider B value */
+#define PLLMR1_TUNING_MASK       0x000003FF     /* PLL tune bits */
+
+/* Defines for CPC0_EPRCSR register */
+#define CPC0_EPRCSR_E0NFE          0x80000000
+#define CPC0_EPRCSR_E1NFE          0x40000000
+#define CPC0_EPRCSR_E1RPP          0x00000080
+#define CPC0_EPRCSR_E0RPP          0x00000040
+#define CPC0_EPRCSR_E1ERP          0x00000020
+#define CPC0_EPRCSR_E0ERP          0x00000010
+#define CPC0_EPRCSR_E1PCI          0x00000002
+#define CPC0_EPRCSR_E0PCI          0x00000001
+
+/* Defines for CPC0_PCI Register */
+#define CPC0_PCI_SPE                       0x00000010 /* PCIINT/WE select       */
+#define CPC0_PCI_HOST_CFG_EN               0x00000008 /* PCI host config Enable */
+#define CPC0_PCI_ARBIT_EN                  0x00000001 /* PCI Internal Arb Enabled*/
+
+/* Defines for CPC0_BOOR Register */
+#define CPC0_BOOT_SEP                      0x00000002 /* serial EEPROM present  */
+
+/* Defines for CPC0_PLLMR1 Register fields */
+#define PLL_ACTIVE                 0x80000000
+#define CPC0_PLLMR1_SSCS           0x80000000
+#define PLL_RESET                  0x40000000
+#define CPC0_PLLMR1_PLLR           0x40000000
+    /* Feedback multiplier */
+#define PLL_FBKDIV                 0x00F00000
+#define CPC0_PLLMR1_FBDV           0x00F00000
+#define PLL_FBKDIV_16              0x00000000
+#define PLL_FBKDIV_1               0x00100000
+#define PLL_FBKDIV_2               0x00200000
+#define PLL_FBKDIV_3               0x00300000
+#define PLL_FBKDIV_4               0x00400000
+#define PLL_FBKDIV_5               0x00500000
+#define PLL_FBKDIV_6               0x00600000
+#define PLL_FBKDIV_7               0x00700000
+#define PLL_FBKDIV_8               0x00800000
+#define PLL_FBKDIV_9               0x00900000
+#define PLL_FBKDIV_10              0x00A00000
+#define PLL_FBKDIV_11              0x00B00000
+#define PLL_FBKDIV_12              0x00C00000
+#define PLL_FBKDIV_13              0x00D00000
+#define PLL_FBKDIV_14              0x00E00000
+#define PLL_FBKDIV_15              0x00F00000
+    /* Forward A divisor */
+#define PLL_FWDDIVA                0x00070000
+#define CPC0_PLLMR1_FWDVA          0x00070000
+#define PLL_FWDDIVA_8              0x00000000
+#define PLL_FWDDIVA_7              0x00010000
+#define PLL_FWDDIVA_6              0x00020000
+#define PLL_FWDDIVA_5              0x00030000
+#define PLL_FWDDIVA_4              0x00040000
+#define PLL_FWDDIVA_3              0x00050000
+#define PLL_FWDDIVA_2              0x00060000
+#define PLL_FWDDIVA_1              0x00070000
+    /* Forward B divisor */
+#define PLL_FWDDIVB                0x00007000
+#define CPC0_PLLMR1_FWDVB          0x00007000
+#define PLL_FWDDIVB_8              0x00000000
+#define PLL_FWDDIVB_7              0x00001000
+#define PLL_FWDDIVB_6              0x00002000
+#define PLL_FWDDIVB_5              0x00003000
+#define PLL_FWDDIVB_4              0x00004000
+#define PLL_FWDDIVB_3              0x00005000
+#define PLL_FWDDIVB_2              0x00006000
+#define PLL_FWDDIVB_1              0x00007000
+    /* PLL tune bits */
+#define PLL_TUNE_MASK            0x000003FF
+#define PLL_TUNE_2_M_3           0x00000133     /*  2 <= M <= 3               */
+#define PLL_TUNE_4_M_6           0x00000134     /*  3 <  M <= 6               */
+#define PLL_TUNE_7_M_10          0x00000138     /*  6 <  M <= 10              */
+#define PLL_TUNE_11_M_14         0x0000013C     /* 10 <  M <= 14              */
+#define PLL_TUNE_15_M_40         0x0000023E     /* 14 <  M <= 40              */
+#define PLL_TUNE_VCO_LOW         0x00000000     /* 500MHz <= VCO <=  800MHz   */
+#define PLL_TUNE_VCO_HI          0x00000080     /* 800MHz <  VCO <= 1000MHz   */
+
+/* Defines for CPC0_PLLMR0 Register fields */
+    /* CPU divisor */
+#define PLL_CPUDIV                 0x00300000
+#define CPC0_PLLMR0_CCDV           0x00300000
+#define PLL_CPUDIV_1               0x00000000
+#define PLL_CPUDIV_2               0x00100000
+#define PLL_CPUDIV_3               0x00200000
+#define PLL_CPUDIV_4               0x00300000
+    /* PLB divisor */
+#define PLL_PLBDIV                 0x00030000
+#define CPC0_PLLMR0_CBDV           0x00030000
+#define PLL_PLBDIV_1               0x00000000
+#define PLL_PLBDIV_2               0x00010000
+#define PLL_PLBDIV_3               0x00020000
+#define PLL_PLBDIV_4               0x00030000
+    /* OPB divisor */
+#define PLL_OPBDIV                 0x00003000
+#define CPC0_PLLMR0_OPDV           0x00003000
+#define PLL_OPBDIV_1               0x00000000
+#define PLL_OPBDIV_2               0x00001000
+#define PLL_OPBDIV_3               0x00002000
+#define PLL_OPBDIV_4               0x00003000
+    /* EBC divisor */
+#define PLL_EXTBUSDIV              0x00000300
+#define CPC0_PLLMR0_EPDV           0x00000300
+#define PLL_EXTBUSDIV_2            0x00000000
+#define PLL_EXTBUSDIV_3            0x00000100
+#define PLL_EXTBUSDIV_4            0x00000200
+#define PLL_EXTBUSDIV_5            0x00000300
+    /* MAL divisor */
+#define PLL_MALDIV                 0x00000030
+#define CPC0_PLLMR0_MPDV           0x00000030
+#define PLL_MALDIV_1               0x00000000
+#define PLL_MALDIV_2               0x00000010
+#define PLL_MALDIV_3               0x00000020
+#define PLL_MALDIV_4               0x00000030
+    /* PCI divisor */
+#define PLL_PCIDIV                 0x00000003
+#define CPC0_PLLMR0_PPFD           0x00000003
+#define PLL_PCIDIV_1               0x00000000
+#define PLL_PCIDIV_2               0x00000001
+#define PLL_PCIDIV_3               0x00000002
+#define PLL_PCIDIV_4               0x00000003
+
+/*
+ *-------------------------------------------------------------------------------
+ * PLL settings for 266MHz CPU, 133MHz PLB/SDRAM, 66MHz EBC, 33MHz PCI,
+ * assuming a 33.3MHz input clock to the 405EP.
+ *-------------------------------------------------------------------------------
+ */
+#define PLLMR0_266_133_66  (PLL_CPUDIV_1 | PLL_PLBDIV_2 |  \
+                            PLL_OPBDIV_2 | PLL_EXTBUSDIV_2 |  \
+                            PLL_MALDIV_1 | PLL_PCIDIV_4)
+#define PLLMR1_266_133_66  (PLL_FBKDIV_8  |  \
+                            PLL_FWDDIVA_3 | PLL_FWDDIVB_3 |  \
+                            PLL_TUNE_15_M_40 | PLL_TUNE_VCO_LOW)
+
+#define PLLMR0_133_66_66_33  (PLL_CPUDIV_1 | PLL_PLBDIV_1 |  \
+                              PLL_OPBDIV_2 | PLL_EXTBUSDIV_4 |  \
+                              PLL_MALDIV_1 | PLL_PCIDIV_4)
+#define PLLMR1_133_66_66_33  (PLL_FBKDIV_4  |  \
+                              PLL_FWDDIVA_6 | PLL_FWDDIVB_6 |  \
+                              PLL_TUNE_15_M_40 | PLL_TUNE_VCO_LOW)
+#define PLLMR0_200_100_50_33 (PLL_CPUDIV_1 | PLL_PLBDIV_2 |  \
+                              PLL_OPBDIV_2 | PLL_EXTBUSDIV_3 |  \
+                              PLL_MALDIV_1 | PLL_PCIDIV_4)
+#define PLLMR1_200_100_50_33 (PLL_FBKDIV_6  |  \
+                              PLL_FWDDIVA_4 | PLL_FWDDIVB_4 |  \
+                              PLL_TUNE_15_M_40 | PLL_TUNE_VCO_LOW)
+#define PLLMR0_266_133_66_33 (PLL_CPUDIV_1 | PLL_PLBDIV_2 |  \
+                              PLL_OPBDIV_2 | PLL_EXTBUSDIV_4 |  \
+                              PLL_MALDIV_1 | PLL_PCIDIV_4)
+#define PLLMR1_266_133_66_33 (PLL_FBKDIV_8  |  \
+                              PLL_FWDDIVA_3 | PLL_FWDDIVB_3 |  \
+                              PLL_TUNE_15_M_40 | PLL_TUNE_VCO_LOW)
+
+/*
+ * PLL Voltage Controlled Oscillator (VCO) definitions
+ * Maximum and minimum values (in MHz) for correct PLL operation.
+ */
+#define VCO_MIN     500
+#define VCO_MAX     1000
+#else /* #ifdef CONFIG_405EP */
 /******************************************************************************
  * Control
  ******************************************************************************/
@@ -236,7 +489,8 @@
 #define cntrl1  (CNTRL_DCR_BASE+0x2)  /* Control 1 register		     */
 #define reset   (CNTRL_DCR_BASE+0x3)  /* reset register			     */
 #define strap   (CNTRL_DCR_BASE+0x4)  /* strap register		   	     */
-#define ecr     (0xAA)                /* edge conditioning register (405GPr) */
+
+#define ecr     (0xaa)                /* edge conditioner register (405gpr)  */
 
 /* Bit definitions */
 #define PLLMR_FWD_DIV_MASK      0xE0000000     /* Forward Divisor */
@@ -300,6 +554,7 @@
  */
 #define VCO_MIN     400
 #define VCO_MAX     800
+#endif /* #ifdef CONFIG_405EP */
 
 /******************************************************************************
  * Memory Access Layer
@@ -364,6 +619,25 @@
 #define ocmdsarc   (OCM_DCR_BASE+0x02)  /* OCM D-side address compare reg    */
 #define ocmdscntl  (OCM_DCR_BASE+0x03)  /* OCM D-side control reg            */
 
+/******************************************************************************
+ * GPIO macro register defines
+ ******************************************************************************/
+#define GPIO_BASE  0xEF600700
+#define GPIO0_OR               (GPIO_BASE+0x0)
+#define GPIO0_TCR              (GPIO_BASE+0x4)
+#define GPIO0_OSRH             (GPIO_BASE+0x8)
+#define GPIO0_OSRL             (GPIO_BASE+0xC)
+#define GPIO0_TSRH             (GPIO_BASE+0x10)
+#define GPIO0_TSRL             (GPIO_BASE+0x14)
+#define GPIO0_ODR              (GPIO_BASE+0x18)
+#define GPIO0_IR               (GPIO_BASE+0x1C)
+#define GPIO0_RR1              (GPIO_BASE+0x20)
+#define GPIO0_RR2              (GPIO_BASE+0x24)
+#define GPIO0_ISR1H            (GPIO_BASE+0x30)
+#define GPIO0_ISR1L            (GPIO_BASE+0x34)
+#define GPIO0_ISR2H            (GPIO_BASE+0x38)
+#define GPIO0_ISR2L            (GPIO_BASE+0x3C)
+
 
 /*
  * Macro for accessing the indirect EBC register