Update of new NAND code

Patch by Ladislav Michl, 13 Sep 2005

32 files changed, 4635 insertions, 880 deletions

diff --git a/Makefile b/Makefile
index ab30276..c15efd9 100644
--- a/Makefile
+++ b/Makefile
@@ -118,6 +118,7 @@ LIBS += disk/libdisk.a
 LIBS += rtc/librtc.a
 LIBS += dtt/libdtt.a
 LIBS += drivers/libdrivers.a
+LIBS += drivers/nand/libnand.a
 LIBS += drivers/sk98lin/libsk98lin.a
 LIBS += post/libpost.a post/cpu/libcpu.a
 LIBS += common/libcommon.a
@@ -1391,6 +1392,17 @@ mx1ads_config	:	unconfig
 mx1fs2_config	:	unconfig
 	@./mkconfig $(@:_config=) arm arm920t mx1fs2 NULL imx
 
+netstar_32_config	\
+netstar_config:		unconfig
+	@if [ "$(findstring _32_,$@)" ] ; then \
+		echo "... 32MB SDRAM" ; \
+		echo "#define PHYS_SDRAM_1_SIZE SZ_32M" >>include/config.h ; \
+	else \
+		echo "... 64MB SDRAM" ; \
+		echo "#define PHYS_SDRAM_1_SIZE SZ_64M" >>include/config.h ; \
+	fi
+	@./mkconfig -a netstar arm arm925t netstar
+
 omap1510inn_config :	unconfig
 	@./mkconfig $(@:_config=) arm arm925t omap1510inn
 
diff --git a/board/netstar/Makefile b/board/netstar/Makefile
new file mode 100644
index 0000000..8ef2189
--- /dev/null
+++ b/board/netstar/Makefile
@@ -0,0 +1,85 @@
+#
+# (C) Copyright 2005
+# Ladislav Michl, 2N Telekomunikace, michl@2n.cz
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= lib$(BOARD).a
+
+OBJS	:= netstar.o flash.o nand.o
+SOBJS	:= setup.o crcek.o
+
+gcclibdir := $(shell dirname `$(CC) -print-libgcc-file-name`)
+
+LOAD_ADDR = 0x10400000
+LDSCRIPT = $(TOPDIR)/board/$(BOARDDIR)/eeprom.lds
+
+HOST_CFLAGS = -Wall -pedantic -I$(TOPDIR)/include
+
+all:	$(LIB) eeprom.srec eeprom.bin crcek.srec crcek.bin crcit
+
+$(LIB):	$(OBJS) $(SOBJS)
+	$(AR) crv $@ $^
+
+eeprom.srec:	eeprom.o eeprom_start.o
+	$(LD) -T $(LDSCRIPT) -g -Ttext $(LOAD_ADDR) \
+		-o $(<:.o=) -e $(<:.o=) $^ \
+		-L../../examples -lstubs \
+		-L../../lib_generic -lgeneric \
+		-L$(gcclibdir) -lgcc
+	$(OBJCOPY) -O srec $(<:.o=) $@
+
+eeprom.bin:	eeprom.srec
+	$(OBJCOPY) -I srec -O binary $< $@ 2>/dev/null
+
+crcek.srec:	crcek.o
+	$(LD) -g -Ttext 0x00000000 \
+		-o $(<:.o=) -e $(<:.o=) $^
+	$(OBJCOPY) -O srec $(<:.o=) $@
+
+crcek.bin:	crcek.srec
+	$(OBJCOPY) -I srec -O binary $< $@ 2>/dev/null
+
+crcit:		crcit.o crc32.o
+	$(HOSTCC) $(HOST_CFLAGS) -o $@ $^
+
+crcit.o:	crcit.c
+	$(HOSTCC) $(HOST_CFLAGS) -c $<
+
+crc32.o:	$(TOPDIR)/tools/crc32.c
+	$(HOSTCC) $(HOST_CFLAGS) -DUSE_HOSTCC -c $<
+
+clean:
+	rm -f $(SOBJS) $(OBJS) eeprom eeprom.srec eeprom.bin \
+		crcek crcek.srec crcek.bin
+
+distclean:	clean
+	rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+.depend:	Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
+		$(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+
+-include .depend
+
+#########################################################################
diff --git a/board/netstar/config.mk b/board/netstar/config.mk
new file mode 100644
index 0000000..8b73e97
--- /dev/null
+++ b/board/netstar/config.mk
@@ -0,0 +1,11 @@
+#
+# Linux-Kernel is expected to be at 1000'8000,
+# entry 1000'8000 (mem base + reserved)
+#
+# We load ourself to internal RAM at 2001'2000
+# Check map file when changing TEXT_BASE.
+# Everything has fit into 192kB internal SRAM!
+#
+
+# XXX TEXT_BASE = 0x20012000
+TEXT_BASE = 0x13FC0000
diff --git a/board/netstar/crcek.S b/board/netstar/crcek.S
new file mode 100644
index 0000000..6ca4d11
--- /dev/null
+++ b/board/netstar/crcek.S
@@ -0,0 +1,177 @@
+/**
+ * (C) Copyright 2005
+ * 2N Telekomunikace, Ladislav Michl <michl@2n.cz>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2.
+ *
+ * Image layout looks like following:
+ *	u32 - size
+ *	u32 - version
+ *	... - data
+ *	u32 - crc32
+ */
+
+#include "crcek.h"
+
+/**
+ * do_crc32 - calculate CRC32 of given buffer
+ * r0 - crc
+ * r1 - pointer to buffer
+ * r2 - buffer len
+ */
+	.macro	do_crc32
+	ldr	r5, FFFFFFFF
+	eor	r0, r0, r5
+	adr	r3, CRC32_TABLE
+1:
+	ldrb    r4, [r1], #1
+	eor	r4, r4, r0
+	and	r4, r4, #0xff
+	ldr	r4, [r3, r4, lsl#2]
+	eor	r0, r4, r0, lsr#8
+	subs	r2, r2, #0x1
+	bne 	1b
+	eor	r0, r0, r5
+	.endm
+
+	.macro crcuj, offset, size
+	mov	r0, #0
+	ldr	r1, \offset
+	ldr	r2, [r1]
+	cmp	r2, r0		@ no data, no problem
+	beq	2f
+	tst	r2, #3		@ unaligned size
+	bne	2f
+	ldr	r3, \size
+	cmp	r2, r3		@ bogus size
+	bhi	2f
+	add	r1, r1, #4
+	do_crc32
+	ldr	r1, [r1]
+2:
+	cmp	r0, r1
+	.endm
+
+	.macro wait, reg
+	mov	\reg, #0x1000
+3:
+	subs	\reg, \reg, #0x1
+	bne 	3b
+
+	.endm
+.text
+.globl crcek
+crcek:
+	b	crc2_bad
+	mov	r6, #0
+	crcuj	_LOADER1_OFFSET, _LOADER_SIZE
+	bne	crc1_bad
+	orr	r6, r6, #1
+crc1_bad:
+	crcuj	_LOADER2_OFFSET, _LOADER_SIZE
+	bne	crc2_bad
+	orr	r6, r6, #2
+crc2_bad:
+	ldr	r3, _LOADER1_OFFSET
+	ldr	r4, _LOADER2_OFFSET
+	b	boot_2nd
+	tst	r6, #3
+	beq	one_is_bad	@ one of them (or both) has bad crc
+	ldr	r1, [r3, #4]
+	ldr	r2, [r4, #4]
+	cmp	r1, r2		@ boot 2nd loader if versions differ
+	beq	boot_1st
+	b	boot_2nd
+one_is_bad:
+	tst	r6, #1
+	bne	boot_1st
+	tst	r6, #2
+	bne	boot_2nd
+@ We are doomed, so let user know.
+	ldr	r0, GPIO_BASE	@ configure GPIO pins
+	ldr	r1, GPIO_DIRECTION
+	strh	r1, [r0, #0x08]
+blink_loop:
+	mov	r1, #0x08
+	strh    r1, [r0, #0x04]
+	wait	r3
+	mov	r1, #0x10
+	strh    r1, [r0, #0x04]
+	wait	r3
+	b blink_loop
+boot_1st:
+	add	pc, r3, #8
+boot_2nd:
+	add	pc, r4, #8
+
+_LOADER_SIZE:
+	.word LOADER_SIZE - 8	@ minus size and crc32
+_LOADER1_OFFSET:
+	.word LOADER1_OFFSET
+_LOADER2_OFFSET:
+	.word LOADER2_OFFSET
+
+FFFFFFFF:
+	.word 0xffffffff
+CRC32_TABLE:
+	.word 0x00000000, 0x77073096, 0xee0e612c, 0x990951ba, 0x076dc419
+	.word 0x706af48f, 0xe963a535, 0x9e6495a3, 0x0edb8832, 0x79dcb8a4
+	.word 0xe0d5e91e, 0x97d2d988, 0x09b64c2b, 0x7eb17cbd, 0xe7b82d07
+	.word 0x90bf1d91, 0x1db71064, 0x6ab020f2, 0xf3b97148, 0x84be41de
+	.word 0x1adad47d, 0x6ddde4eb, 0xf4d4b551, 0x83d385c7, 0x136c9856
+	.word 0x646ba8c0, 0xfd62f97a, 0x8a65c9ec, 0x14015c4f, 0x63066cd9
+	.word 0xfa0f3d63, 0x8d080df5, 0x3b6e20c8, 0x4c69105e, 0xd56041e4
+	.word 0xa2677172, 0x3c03e4d1, 0x4b04d447, 0xd20d85fd, 0xa50ab56b
+	.word 0x35b5a8fa, 0x42b2986c, 0xdbbbc9d6, 0xacbcf940, 0x32d86ce3
+	.word 0x45df5c75, 0xdcd60dcf, 0xabd13d59, 0x26d930ac, 0x51de003a
+	.word 0xc8d75180, 0xbfd06116, 0x21b4f4b5, 0x56b3c423, 0xcfba9599
+	.word 0xb8bda50f, 0x2802b89e, 0x5f058808, 0xc60cd9b2, 0xb10be924
+	.word 0x2f6f7c87, 0x58684c11, 0xc1611dab, 0xb6662d3d, 0x76dc4190
+	.word 0x01db7106, 0x98d220bc, 0xefd5102a, 0x71b18589, 0x06b6b51f
+	.word 0x9fbfe4a5, 0xe8b8d433, 0x7807c9a2, 0x0f00f934, 0x9609a88e
+	.word 0xe10e9818, 0x7f6a0dbb, 0x086d3d2d, 0x91646c97, 0xe6635c01
+	.word 0x6b6b51f4, 0x1c6c6162, 0x856530d8, 0xf262004e, 0x6c0695ed
+	.word 0x1b01a57b, 0x8208f4c1, 0xf50fc457, 0x65b0d9c6, 0x12b7e950
+	.word 0x8bbeb8ea, 0xfcb9887c, 0x62dd1ddf, 0x15da2d49, 0x8cd37cf3
+	.word 0xfbd44c65, 0x4db26158, 0x3ab551ce, 0xa3bc0074, 0xd4bb30e2
+	.word 0x4adfa541, 0x3dd895d7, 0xa4d1c46d, 0xd3d6f4fb, 0x4369e96a
+	.word 0x346ed9fc, 0xad678846, 0xda60b8d0, 0x44042d73, 0x33031de5
+	.word 0xaa0a4c5f, 0xdd0d7cc9, 0x5005713c, 0x270241aa, 0xbe0b1010
+	.word 0xc90c2086, 0x5768b525, 0x206f85b3, 0xb966d409, 0xce61e49f
+	.word 0x5edef90e, 0x29d9c998, 0xb0d09822, 0xc7d7a8b4, 0x59b33d17
+	.word 0x2eb40d81, 0xb7bd5c3b, 0xc0ba6cad, 0xedb88320, 0x9abfb3b6
+	.word 0x03b6e20c, 0x74b1d29a, 0xead54739, 0x9dd277af, 0x04db2615
+	.word 0x73dc1683, 0xe3630b12, 0x94643b84, 0x0d6d6a3e, 0x7a6a5aa8
+	.word 0xe40ecf0b, 0x9309ff9d, 0x0a00ae27, 0x7d079eb1, 0xf00f9344
+	.word 0x8708a3d2, 0x1e01f268, 0x6906c2fe, 0xf762575d, 0x806567cb
+	.word 0x196c3671, 0x6e6b06e7, 0xfed41b76, 0x89d32be0, 0x10da7a5a
+	.word 0x67dd4acc, 0xf9b9df6f, 0x8ebeeff9, 0x17b7be43, 0x60b08ed5
+	.word 0xd6d6a3e8, 0xa1d1937e, 0x38d8c2c4, 0x4fdff252, 0xd1bb67f1
+	.word 0xa6bc5767, 0x3fb506dd, 0x48b2364b, 0xd80d2bda, 0xaf0a1b4c
+	.word 0x36034af6, 0x41047a60, 0xdf60efc3, 0xa867df55, 0x316e8eef
+	.word 0x4669be79, 0xcb61b38c, 0xbc66831a, 0x256fd2a0, 0x5268e236
+	.word 0xcc0c7795, 0xbb0b4703, 0x220216b9, 0x5505262f, 0xc5ba3bbe
+	.word 0xb2bd0b28, 0x2bb45a92, 0x5cb36a04, 0xc2d7ffa7, 0xb5d0cf31
+	.word 0x2cd99e8b, 0x5bdeae1d, 0x9b64c2b0, 0xec63f226, 0x756aa39c
+	.word 0x026d930a, 0x9c0906a9, 0xeb0e363f, 0x72076785, 0x05005713
+	.word 0x95bf4a82, 0xe2b87a14, 0x7bb12bae, 0x0cb61b38, 0x92d28e9b
+	.word 0xe5d5be0d, 0x7cdcefb7, 0x0bdbdf21, 0x86d3d2d4, 0xf1d4e242
+	.word 0x68ddb3f8, 0x1fda836e, 0x81be16cd, 0xf6b9265b, 0x6fb077e1
+	.word 0x18b74777, 0x88085ae6, 0xff0f6a70, 0x66063bca, 0x11010b5c
+	.word 0x8f659eff, 0xf862ae69, 0x616bffd3, 0x166ccf45, 0xa00ae278
+	.word 0xd70dd2ee, 0x4e048354, 0x3903b3c2, 0xa7672661, 0xd06016f7
+	.word 0x4969474d, 0x3e6e77db, 0xaed16a4a, 0xd9d65adc, 0x40df0b66
+	.word 0x37d83bf0, 0xa9bcae53, 0xdebb9ec5, 0x47b2cf7f, 0x30b5ffe9
+	.word 0xbdbdf21c, 0xcabac28a, 0x53b39330, 0x24b4a3a6, 0xbad03605
+	.word 0xcdd70693, 0x54de5729, 0x23d967bf, 0xb3667a2e, 0xc4614ab8
+	.word 0x5d681b02, 0x2a6f2b94, 0xb40bbe37, 0xc30c8ea1, 0x5a05df1b
+	.word 0x2d02ef8d
+
+GPIO_BASE:
+	.word 0xfffce000
+GPIO_DIRECTION:
+	.word 0x0000ffe7
+
+.end
diff --git a/board/netstar/crcek.h b/board/netstar/crcek.h
new file mode 100644
index 0000000..30c0860
--- /dev/null
+++ b/board/netstar/crcek.h
@@ -0,0 +1,3 @@
+#define LOADER_SIZE	(448 * 1024)
+#define LOADER1_OFFSET	(128 * 1024)
+#define LOADER2_OFFSET	(LOADER1_OFFSET + LOADER_SIZE)
diff --git a/board/netstar/crcit.c b/board/netstar/crcit.c
new file mode 100644
index 0000000..f6d3066
--- /dev/null
+++ b/board/netstar/crcit.c
@@ -0,0 +1,86 @@
+/*
+ * (C) Copyright 2005
+ * 2N Telekomunikace, Ladislav Michl <michl@2n.cz>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <stdint.h>
+#include <fcntl.h>
+#include <string.h>
+#include <unistd.h>
+#include <sys/types.h>
+#include <sys/stat.h>
+#include "crcek.h"
+
+extern unsigned long crc32(unsigned long, const unsigned char *, unsigned int);
+
+uint32_t data[LOADER_SIZE/4 + 3];
+
+int doit(char *path, unsigned version)
+{
+	uint32_t *p;
+	ssize_t size;
+	int fd;
+
+	fd = open(path, O_RDONLY);
+	if (fd == -1) {
+		perror("Error opening file");
+		return EXIT_FAILURE;
+	}
+	p = data + 2;
+	size = read(fd, p, LOADER_SIZE + 4);
+	if (size == -1) {
+		perror("Error reading file");
+		return EXIT_FAILURE;
+	}
+	if (size > LOADER_SIZE) {
+		fprintf(stderr, "File too large\n");
+		return EXIT_FAILURE;
+	}
+	size = (((size - 1) >> 2) + 1) << 2;
+	data[0] = size + 4;	/* add size of version field */
+	data[1] = version;
+	data[(size >> 2) + 2] = crc32(0, (unsigned char *)(data + 1), data[0]);
+	close(fd);
+
+	if (write(STDOUT_FILENO, data, size + 3*4) == -1) {
+		perror("Error writing file");
+		return EXIT_FAILURE;
+	}
+
+	return EXIT_SUCCESS;
+}
+
+int main(int argc, char **argv)
+{
+	if (argc == 2) {
+		return doit(argv[1], 0);
+	} else if ((argc == 4) && (strcmp(argv[1], "-v") == 0)) {
+		char *endptr, *nptr = argv[2];
+		unsigned ver = strtoul(nptr, &endptr, 0);
+		if (nptr != '\0' && endptr == '\0')
+			return doit(argv[3], ver);
+	}
+	fprintf(stderr, "Usage: crcit [-v version] <image>\n");
+
+	return EXIT_FAILURE;
+}
diff --git a/board/netstar/eeprom.c b/board/netstar/eeprom.c
new file mode 100644
index 0000000..fef3822
--- /dev/null
+++ b/board/netstar/eeprom.c
@@ -0,0 +1,215 @@
+/*
+ * (C) Copyright 2005
+ * Ladislav Michl, 2N Telekomunikace, michl@2n.cz
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ * Some code shamelessly stolen back from Robin Getz.
+ */
+
+#define DEBUG
+
+#include <common.h>
+#include <exports.h>
+#include "../drivers/smc91111.h"
+
+#define SMC_BASE_ADDRESS CONFIG_SMC91111_BASE
+
+static u16 read_eeprom_reg(u16 reg)
+{
+	int timeout;
+
+	SMC_SELECT_BANK(2);
+	SMC_outw(reg, PTR_REG);
+
+	SMC_SELECT_BANK(1);
+	SMC_outw(SMC_inw (CTL_REG) | CTL_EEPROM_SELECT | CTL_RELOAD,
+		 CTL_REG);
+	timeout = 100;
+	while((SMC_inw (CTL_REG) & CTL_RELOAD) && --timeout)
+		udelay(100);
+	if (timeout == 0) {
+		printf("Timeout Reading EEPROM register %02x\n", reg);
+		return 0;
+	}
+
+	return SMC_inw (GP_REG);
+}
+
+static int write_eeprom_reg(u16 value, u16 reg)
+{
+	int timeout;
+
+	SMC_SELECT_BANK(2);
+	SMC_outw(reg, PTR_REG);
+
+	SMC_SELECT_BANK(1);
+	SMC_outw(value, GP_REG);
+	SMC_outw(SMC_inw (CTL_REG) | CTL_EEPROM_SELECT | CTL_STORE, CTL_REG);
+	timeout = 100;
+	while ((SMC_inw(CTL_REG) & CTL_STORE) && --timeout)
+		udelay (100);
+	if (timeout == 0) {
+		printf("Timeout Writing EEPROM register %02x\n", reg);
+		return 0;
+	}
+
+	return 1;
+}
+
+static int write_data(u16 *buf, int len)
+{
+	u16 reg = 0x23;
+
+	while (len--)
+		write_eeprom_reg(*buf++, reg++);
+
+	return 0;
+}
+
+static int verify_macaddr(char *s)
+{
+	u16 reg;
+	int i, err = 0;
+
+	printf("MAC Address: ");
+	err = i = 0;
+	for (i = 0; i < 3; i++) {
+		reg = read_eeprom_reg(0x20 + i);
+		printf("%02x:%02x%c", reg & 0xff, reg >> 8, i != 2 ? ':' : '\n');
+		if (s)
+			err |= reg != ((u16 *)s)[i];
+	}
+
+	return err ? 0 : 1;
+}
+
+static int set_mac(char *s)
+{
+	int i;
+	char *e, eaddr[6];
+
+	/* turn string into mac value */
+	for (i = 0; i < 6; i++) {
+		eaddr[i] = simple_strtoul(s, &e, 16);
+		s = (*e) ? e+1 : e;
+	}
+
+	for (i = 0; i < 3; i++)
+		write_eeprom_reg(*(((u16 *)eaddr) + i), 0x20 + i);
+
+	return 0;
+}
+
+static int parse_element(char *s, unsigned char *buf, int len)
+{
+	int cnt;
+	char *p, num[3];
+	unsigned char id;
+
+	id = simple_strtoul(s, &p, 16);
+	if (*p++ != ':')
+		return -1;
+	cnt = 2;
+	num[2] = 0;
+	for (; *p; p += 2) {
+		if (p[1] == 0)
+			return -2;
+		if (cnt + 3 > len)
+			return -3;
+		num[0] = p[0];
+		num[1] = p[1];
+		buf[cnt++] = simple_strtoul(num, NULL, 16);
+	}
+	buf[0] = id;
+	buf[1] = cnt - 2;
+
+	return cnt;
+}
+
+extern int crcek(void);
+
+int eeprom(int argc, char *argv[])
+{
+	int i, len, ret;
+	unsigned char buf[58], *p;
+
+	app_startup(argv);
+	if (get_version() != XF_VERSION) {
+		printf("Wrong XF_VERSION.\n");
+		printf("Application expects ABI version %d\n", XF_VERSION);
+		printf("Actual U-Boot ABI version %d\n", (int)get_version());
+		return 1;
+	}
+
+	return crcek();
+
+	if ((SMC_inw (BANK_SELECT) & 0xFF00) != 0x3300) {
+		printf("SMSC91111 not found.\n");
+		return 2;
+	}
+
+	/* Called without parameters - print MAC address */
+	if (argc < 2) {
+		verify_macaddr(NULL);
+		return 0;
+	}
+
+	/* Print help message */
+	if (argv[1][1] == 'h') {
+		printf("VoiceBlue EEPROM writer\n");
+		printf("Built: %s at %s\n", __DATE__ , __TIME__ );
+		printf("Usage:\n\t<mac_address> [<element_1>] [<...>]\n");
+		return 0;
+	}
+
+	/* Try to parse information elements */
+	len = sizeof(buf);
+	p = buf;
+	for (i = 2; i < argc; i++) {
+		ret = parse_element(argv[i], p, len);
+		switch (ret) {
+		case -1:
+			printf("Element %d: malformed\n", i - 1);
+			return 3;
+		case -2:
+			printf("Element %d: odd character count\n", i - 1);
+			return 3;
+		case -3:
+			printf("Out of EEPROM memory\n");
+			return 3;
+		default:
+			p += ret;
+			len -= ret;
+		}
+	}
+
+	/* First argument (MAC) is mandatory */
+	set_mac(argv[1]);
+	if (verify_macaddr(argv[1])) {
+		printf("*** MAC address does not match! ***\n");
+		return 4;
+	}
+
+	while (len--)
+		*p++ = 0;
+
+	write_data((u16 *)buf, sizeof(buf) >> 1);
+
+	return 0;
+}
diff --git a/board/netstar/eeprom.lds b/board/netstar/eeprom.lds
new file mode 100644
index 0000000..317550d
--- /dev/null
+++ b/board/netstar/eeprom.lds
@@ -0,0 +1,51 @@
+/*
+ * (C) Copyright 2002
+ * Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
+ * (C) Copyright 2005
+ * Ladislav Michl, 2N Telekomunikace, <michl@2n.cz>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
+OUTPUT_ARCH(arm)
+ENTRY(_start)
+SECTIONS
+{
+	. = ALIGN(4);
+	.text      :
+	{
+	  eeprom_start.o	(.text)
+	  *(.text)
+	}
+
+	. = ALIGN(4);
+	.rodata : { *(.rodata) }
+
+	. = ALIGN(4);
+	.data : { *(.data) }
+
+	. = ALIGN(4);
+	.got : { *(.got) }
+
+	. = ALIGN(4);
+	__bss_start = .;
+	.bss : { *(.bss) }
+	_end = .;
+}
diff --git a/board/netstar/eeprom_start.S b/board/netstar/eeprom_start.S
new file mode 100644
index 0000000..75d9f05
--- /dev/null
+++ b/board/netstar/eeprom_start.S
@@ -0,0 +1,177 @@
+/*
+ * Copyright (c) 2005  2N Telekomunikace
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ */
+
+.globl _start
+_start:	b       eeprom
+
+#include "crcek.h"
+
+/**
+ * do_crc32 - calculate CRC32 of given buffer
+ * r0 - crc
+ * r1 - pointer to buffer
+ * r2 - buffer len
+ */
+	.macro	do_crc32
+	ldr	r5, FFFFFFFF
+	eor	r0, r0, r5
+	adr	r3, CRC32_TABLE
+1:
+	ldrb    r4, [r1], #1
+	eor	r4, r4, r0
+	and	r4, r4, #0xff
+	ldr	r4, [r3, r4, lsl#2]
+	eor	r0, r4, r0, lsr#8
+	subs	r2, r2, #0x1
+	bne 	1b
+	eor	r0, r0, r5
+	.endm
+
+	.macro crcuj, offset, size
+	ldr	r1, \offset
+	ldr	r2, [r1]
+	cmp	r2, #0		@ no data, no problem
+	beq	2f
+	mov     r7, #1
+	tst	r2, #3		@ unaligned size
+	bne	2f
+	mov     r7, #2
+	ldr	r0, \size
+	cmp	r2, r0		@ bogus size
+	bhi	2f
+	mov     r7, #3
+	add	r1, r1, #4
+	mov	r0, #0
+	do_crc32
+	ldr	r1, [r1]
+2:
+	cmp	r0, r1
+	.endm
+
+	.macro wait, reg
+	mov	\reg, #0x1000
+3:
+	subs	\reg, \reg, #0x1
+	bne 	3b
+
+	.endm
+.text
+.globl crcek
+crcek:
+	mov	r6, #0
+@	crcuj	_LOADER1_OFFSET, _LOADER_SIZE
+@	bne	crc1_bad
+@	orr	r6, r6, #1
+crc1_bad:
+	crcuj	_LOADER2_OFFSET, _LOADER_SIZE
+	bne	crc2_bad
+	orr	r6, r6, #2
+crc2_bad:
+@	mov	r0, r6
+	mov     pc, lr
+	ldr	r3, _LOADER1_OFFSET
+	ldr	r4, _LOADER2_OFFSET
+	tst	r6, #3
+	beq	one_is_bad	@ one of them (or both) has bad crc
+	ldr	r1, [r3, #4]
+	ldr	r2, [r4, #4]
+	cmp	r1, r2		@ boot 2nd loader if versions differ
+	beq	boot_1st
+	b	boot_2nd
+one_is_bad:
+	tst	r6, #1
+	bne	boot_1st
+	tst	r6, #2
+	bne	boot_2nd
+@ We are doomed, so let user know.
+	ldr	r0, GPIO_BASE	@ configure GPIO pins
+	ldr	r1, GPIO_DIRECTION
+	strh	r1, [r0, #0x08]
+blink_loop:
+	mov	r1, #0x08
+	strh    r1, [r0, #0x04]
+	wait	r3
+	mov	r1, #0x10
+	strh    r1, [r0, #0x04]
+	wait	r3
+	b blink_loop
+boot_1st:
+	add	pc, r3, #8
+boot_2nd:
+	add	pc, r4, #8
+
+_LOADER_SIZE:
+	.word LOADER_SIZE - 8	@ minus size and crc32
+_LOADER1_OFFSET:
+	.word LOADER1_OFFSET
+_LOADER2_OFFSET:
+	.word LOADER2_OFFSET
+
+FFFFFFFF:
+	.word 0xffffffff
+CRC32_TABLE:
+	.word 0x00000000, 0x77073096, 0xee0e612c, 0x990951ba, 0x076dc419
+	.word 0x706af48f, 0xe963a535, 0x9e6495a3, 0x0edb8832, 0x79dcb8a4
+	.word 0xe0d5e91e, 0x97d2d988, 0x09b64c2b, 0x7eb17cbd, 0xe7b82d07
+	.word 0x90bf1d91, 0x1db71064, 0x6ab020f2, 0xf3b97148, 0x84be41de
+	.word 0x1adad47d, 0x6ddde4eb, 0xf4d4b551, 0x83d385c7, 0x136c9856
+	.word 0x646ba8c0, 0xfd62f97a, 0x8a65c9ec, 0x14015c4f, 0x63066cd9
+	.word 0xfa0f3d63, 0x8d080df5, 0x3b6e20c8, 0x4c69105e, 0xd56041e4
+	.word 0xa2677172, 0x3c03e4d1, 0x4b04d447, 0xd20d85fd, 0xa50ab56b
+	.word 0x35b5a8fa, 0x42b2986c, 0xdbbbc9d6, 0xacbcf940, 0x32d86ce3
+	.word 0x45df5c75, 0xdcd60dcf, 0xabd13d59, 0x26d930ac, 0x51de003a
+	.word 0xc8d75180, 0xbfd06116, 0x21b4f4b5, 0x56b3c423, 0xcfba9599
+	.word 0xb8bda50f, 0x2802b89e, 0x5f058808, 0xc60cd9b2, 0xb10be924
+	.word 0x2f6f7c87, 0x58684c11, 0xc1611dab, 0xb6662d3d, 0x76dc4190
+	.word 0x01db7106, 0x98d220bc, 0xefd5102a, 0x71b18589, 0x06b6b51f
+	.word 0x9fbfe4a5, 0xe8b8d433, 0x7807c9a2, 0x0f00f934, 0x9609a88e
+	.word 0xe10e9818, 0x7f6a0dbb, 0x086d3d2d, 0x91646c97, 0xe6635c01
+	.word 0x6b6b51f4, 0x1c6c6162, 0x856530d8, 0xf262004e, 0x6c0695ed
+	.word 0x1b01a57b, 0x8208f4c1, 0xf50fc457, 0x65b0d9c6, 0x12b7e950
+	.word 0x8bbeb8ea, 0xfcb9887c, 0x62dd1ddf, 0x15da2d49, 0x8cd37cf3
+	.word 0xfbd44c65, 0x4db26158, 0x3ab551ce, 0xa3bc0074, 0xd4bb30e2
+	.word 0x4adfa541, 0x3dd895d7, 0xa4d1c46d, 0xd3d6f4fb, 0x4369e96a
+	.word 0x346ed9fc, 0xad678846, 0xda60b8d0, 0x44042d73, 0x33031de5
+	.word 0xaa0a4c5f, 0xdd0d7cc9, 0x5005713c, 0x270241aa, 0xbe0b1010
+	.word 0xc90c2086, 0x5768b525, 0x206f85b3, 0xb966d409, 0xce61e49f
+	.word 0x5edef90e, 0x29d9c998, 0xb0d09822, 0xc7d7a8b4, 0x59b33d17
+	.word 0x2eb40d81, 0xb7bd5c3b, 0xc0ba6cad, 0xedb88320, 0x9abfb3b6
+	.word 0x03b6e20c, 0x74b1d29a, 0xead54739, 0x9dd277af, 0x04db2615
+	.word 0x73dc1683, 0xe3630b12, 0x94643b84, 0x0d6d6a3e, 0x7a6a5aa8
+	.word 0xe40ecf0b, 0x9309ff9d, 0x0a00ae27, 0x7d079eb1, 0xf00f9344
+	.word 0x8708a3d2, 0x1e01f268, 0x6906c2fe, 0xf762575d, 0x806567cb
+	.word 0x196c3671, 0x6e6b06e7, 0xfed41b76, 0x89d32be0, 0x10da7a5a
+	.word 0x67dd4acc, 0xf9b9df6f, 0x8ebeeff9, 0x17b7be43, 0x60b08ed5
+	.word 0xd6d6a3e8, 0xa1d1937e, 0x38d8c2c4, 0x4fdff252, 0xd1bb67f1
+	.word 0xa6bc5767, 0x3fb506dd, 0x48b2364b, 0xd80d2bda, 0xaf0a1b4c
+	.word 0x36034af6, 0x41047a60, 0xdf60efc3, 0xa867df55, 0x316e8eef
+	.word 0x4669be79, 0xcb61b38c, 0xbc66831a, 0x256fd2a0, 0x5268e236
+	.word 0xcc0c7795, 0xbb0b4703, 0x220216b9, 0x5505262f, 0xc5ba3bbe
+	.word 0xb2bd0b28, 0x2bb45a92, 0x5cb36a04, 0xc2d7ffa7, 0xb5d0cf31
+	.word 0x2cd99e8b, 0x5bdeae1d, 0x9b64c2b0, 0xec63f226, 0x756aa39c
+	.word 0x026d930a, 0x9c0906a9, 0xeb0e363f, 0x72076785, 0x05005713
+	.word 0x95bf4a82, 0xe2b87a14, 0x7bb12bae, 0x0cb61b38, 0x92d28e9b
+	.word 0xe5d5be0d, 0x7cdcefb7, 0x0bdbdf21, 0x86d3d2d4, 0xf1d4e242
+	.word 0x68ddb3f8, 0x1fda836e, 0x81be16cd, 0xf6b9265b, 0x6fb077e1
+	.word 0x18b74777, 0x88085ae6, 0xff0f6a70, 0x66063bca, 0x11010b5c
+	.word 0x8f659eff, 0xf862ae69, 0x616bffd3, 0x166ccf45, 0xa00ae278
+	.word 0xd70dd2ee, 0x4e048354, 0x3903b3c2, 0xa7672661, 0xd06016f7
+	.word 0x4969474d, 0x3e6e77db, 0xaed16a4a, 0xd9d65adc, 0x40df0b66
+	.word 0x37d83bf0, 0xa9bcae53, 0xdebb9ec5, 0x47b2cf7f, 0x30b5ffe9
+	.word 0xbdbdf21c, 0xcabac28a, 0x53b39330, 0x24b4a3a6, 0xbad03605
+	.word 0xcdd70693, 0x54de5729, 0x23d967bf, 0xb3667a2e, 0xc4614ab8
+	.word 0x5d681b02, 0x2a6f2b94, 0xb40bbe37, 0xc30c8ea1, 0x5a05df1b
+	.word 0x2d02ef8d
+
+GPIO_BASE:
+	.word 0xfffce000
+GPIO_DIRECTION:
+	.word 0x0000ffe7
+
+.end
diff --git a/board/netstar/flash.c b/board/netstar/flash.c
new file mode 100644
index 0000000..f555c0c
--- /dev/null
+++ b/board/netstar/flash.c
@@ -0,0 +1,343 @@
+/*
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Alex Zuepke <azu@sysgo.de>
+ *
+ * (C) Copyright 2005
+ * 2N Telekomunikace, a.s. <www.2n.cz>
+ * Ladislav Michl <michl@2n.cz>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+/*#if 0 */
+#if (PHYS_SDRAM_1_SIZE != SZ_32M)
+
+#include "crcek.h"
+
+#if (CFG_MAX_FLASH_BANKS > 1)
+#error There is always only _one_ flash chip
+#endif
+
+flash_info_t flash_info[CFG_MAX_FLASH_BANKS];
+
+#define CMD_READ_ARRAY		0x000000f0
+#define CMD_UNLOCK1		0x000000aa
+#define CMD_UNLOCK2		0x00000055
+#define CMD_ERASE_SETUP		0x00000080
+#define CMD_ERASE_CONFIRM	0x00000030
+#define CMD_PROGRAM		0x000000a0
+#define CMD_UNLOCK_BYPASS	0x00000020
+
+#define MEM_FLASH_ADDR1		(*(volatile u16 *)(CFG_FLASH_BASE + (0x00000555 << 1)))
+#define MEM_FLASH_ADDR2		(*(volatile u16 *)(CFG_FLASH_BASE + (0x000002aa << 1)))
+
+#define BIT_ERASE_DONE		0x00000080
+#define BIT_RDY_MASK		0x00000080
+#define BIT_PROGRAM_ERROR	0x00000020
+#define BIT_TIMEOUT		0x80000000	/* our flag */
+
+/*-----------------------------------------------------------------------
+ */
+
+ulong flash_init(void)
+{
+	int i;
+
+	flash_info[0].flash_id = (AMD_MANUFACT & FLASH_VENDMASK) |
+				 (AMD_ID_LV800B & FLASH_TYPEMASK);
+	flash_info[0].size = PHYS_FLASH_1_SIZE;
+	flash_info[0].sector_count = CFG_MAX_FLASH_SECT;
+	memset(flash_info[0].protect, 0, CFG_MAX_FLASH_SECT);
+
+	for (i = 0; i < flash_info[0].sector_count; i++) {
+		switch (i) {
+		case 0: /* 16kB */
+			flash_info[0].start[0] = CFG_FLASH_BASE;
+			break;
+		case 1: /* 8kB */
+			flash_info[0].start[1] = CFG_FLASH_BASE + 0x4000;
+			break;
+		case 2: /* 8kB */
+			flash_info[0].start[2] = CFG_FLASH_BASE + 0x4000 +
+						 0x2000;
+			break;
+		case 3: /* 32 KB */
+			flash_info[0].start[3] = CFG_FLASH_BASE + 0x4000 +
+						 2 * 0x2000;
+			break;
+		case 4:
+			flash_info[0].start[4] = CFG_FLASH_BASE + 0x4000 +
+						 2 * 0x2000 + 0x8000;
+			break;
+		default: /* 64kB */
+			flash_info[0].start[i] = flash_info[0].start[i-1] +
+						 0x10000;
+			break;
+		}
+	}
+
+	/* U-Boot */
+	flash_protect(FLAG_PROTECT_SET,
+		      LOADER1_OFFSET,
+		      LOADER1_OFFSET + LOADER_SIZE - 1, flash_info);
+	/* Protect crcek, env and r_env as well */
+	flash_protect(FLAG_PROTECT_SET, 0, 0x8000 - 1, flash_info);
+
+	return flash_info[0].size;
+}
+
+/*-----------------------------------------------------------------------
+ */
+void flash_print_info(flash_info_t *info)
+{
+	int i;
+
+	switch (info->flash_id & FLASH_VENDMASK) {
+	case (AMD_MANUFACT & FLASH_VENDMASK):
+		puts("AMD: ");
+		break;
+	default:
+		puts("Unknown vendor ");
+		break;
+	}
+
+	switch (info->flash_id & FLASH_TYPEMASK) {
+	case (AMD_ID_LV800B & FLASH_TYPEMASK):
+		puts("AM29LV800BB (8Mb)\n");
+		break;
+	default:
+		puts("Unknown chip type\n");
+		return;
+	}
+
+	printf("  Size: %ld MB in %d sectors\n",
+	       info->size >> 20, info->sector_count);
+
+	puts("  Sector start addresses:");
+	for (i = 0; i < info->sector_count; i++) {
+		if ((i % 5) == 0)
+			puts("\n   ");
+
+		printf(" %08lX%s", info->start[i],
+		       info->protect[i] ? " (RO)" : "     ");
+	}
+	puts("\n");
+}
+
+/*-----------------------------------------------------------------------
+ */
+
+int flash_erase(flash_info_t *info, int s_first, int s_last)
+{
+	ushort result;
+	int prot, sect;
+	int rc = ERR_OK;
+
+	/* first look for protection bits */
+
+	if (info->flash_id == FLASH_UNKNOWN)
+		return ERR_UNKNOWN_FLASH_TYPE;
+
+	if ((s_first < 0) || (s_first > s_last))
+		return ERR_INVAL;
+
+	if ((info->flash_id & FLASH_VENDMASK) !=
+	    (AMD_MANUFACT & FLASH_VENDMASK))
+		return ERR_UNKNOWN_FLASH_VENDOR;
+
+	prot = 0;
+	for (sect = s_first; sect <= s_last; ++sect)
+		if (info->protect[sect])
+			prot++;
+
+	if (prot)
+		printf("- Warning: %d protected sectors will not be erased!\n",
+		       prot);
+	else
+		putc('\n');
+
+	/* Start erase on unprotected sectors */
+	for (sect = s_first; sect <= s_last && !ctrlc (); sect++) {
+		if (info->protect[sect] == 0) {	/* not protected */
+			vu_short *addr = (vu_short *) (info->start[sect]);
+
+			/* arm simple, non interrupt dependent timer */
+			reset_timer_masked();
+
+			MEM_FLASH_ADDR1 = CMD_UNLOCK1;
+			MEM_FLASH_ADDR2 = CMD_UNLOCK2;
+			MEM_FLASH_ADDR1 = CMD_ERASE_SETUP;
+
+			MEM_FLASH_ADDR1 = CMD_UNLOCK1;
+			MEM_FLASH_ADDR2 = CMD_UNLOCK2;
+			*addr = CMD_ERASE_CONFIRM;
+
+			/* wait until flash is ready */
+			while (1) {
+				result = *addr;
+
+				/* check timeout */
+				if (get_timer_masked() > CFG_FLASH_ERASE_TOUT) {
+					MEM_FLASH_ADDR1 = CMD_READ_ARRAY;
+					rc = ERR_TIMOUT;
+					break;
+				}
+
+				if ((result & 0xfff) & BIT_ERASE_DONE)
+					break;
+
+				if ((result & 0xffff) & BIT_PROGRAM_ERROR) {
+					rc = ERR_PROG_ERROR;
+					break;
+				}
+			}
+
+			MEM_FLASH_ADDR1 = CMD_READ_ARRAY;
+
+			if (rc != ERR_OK)
+				goto out;
+
+			putc('.');
+		}
+	}
+out:
+	/* allow flash to settle - wait 10 ms */
+	udelay_masked(10000);
+
+	return rc;
+}
+
+/*-----------------------------------------------------------------------
+ * Copy memory to flash
+ */
+
+volatile static int write_hword(flash_info_t *info, ulong dest, ushort data)
+{
+	vu_short *addr = (vu_short *) dest;
+	ushort result;
+	int rc = ERR_OK;
+
+	/* check if flash is (sufficiently) erased */
+	result = *addr;
+	if ((result & data) != data)
+		return ERR_NOT_ERASED;
+
+	MEM_FLASH_ADDR1 = CMD_UNLOCK1;
+	MEM_FLASH_ADDR2 = CMD_UNLOCK2;
+	MEM_FLASH_ADDR1 = CMD_PROGRAM;
+	*addr = data;
+
+	/* arm simple, non interrupt dependent timer */
+	reset_timer_masked();
+
+	/* wait until flash is ready */
+	while (1) {
+		result = *addr;
+
+		/* check timeout */
+		if (get_timer_masked () > CFG_FLASH_ERASE_TOUT) {
+			rc = ERR_TIMOUT;
+			break;
+		}
+
+		if ((result & 0x80) == (data & 0x80))
+			break;
+
+		if ((result & 0xffff) & BIT_PROGRAM_ERROR) {
+			result = *addr;
+
+			if ((result & 0x80) != (data & 0x80))
+				rc = ERR_PROG_ERROR;
+		}
+	}
+
+	*addr = CMD_READ_ARRAY;
+
+	if (*addr != data)
+		rc = ERR_PROG_ERROR;
+
+	return rc;
+}
+
+/*-----------------------------------------------------------------------
+ * Copy memory to flash.
+ */
+
+int write_buff(flash_info_t *info, uchar *src, ulong addr, ulong cnt)
+{
+	ulong cp, wp;
+	int l;
+	int i, rc;
+	ushort data;
+
+	wp = (addr & ~1);	/* get lower word aligned address */
+
+	/*
+	 * handle unaligned start bytes
+	 */
+	if ((l = addr - wp) != 0) {
+		data = 0;
+		for (i = 0, cp = wp; i < l; ++i, ++cp)
+			data = (data >> 8) | (*(uchar *) cp << 8);
+		for (; i < 2 && cnt > 0; ++i) {
+			data = (data >> 8) | (*src++ << 8);
+			--cnt;
+			++cp;
+		}
+		for (; cnt == 0 && i < 2; ++i, ++cp)
+			data = (data >> 8) | (*(uchar *) cp << 8);
+
+		if ((rc = write_hword(info, wp, data)) != 0)
+			return (rc);
+		wp += 2;
+	}
+
+	/*
+	 * handle word aligned part
+	 */
+	while (cnt >= 2) {
+		data = *((vu_short *) src);
+		if ((rc = write_hword(info, wp, data)) != 0)
+			return (rc);
+		src += 2;
+		wp += 2;
+		cnt -= 2;
+	}
+
+	if (cnt == 0)
+		return ERR_OK;
+
+	/*
+	 * handle unaligned tail bytes
+	 */
+	data = 0;
+	for (i = 0, cp = wp; i < 2 && cnt > 0; ++i, ++cp) {
+		data = (data >> 8) | (*src++ << 8);
+		--cnt;
+	}
+	for (; i < 2; ++i, ++cp)
+		data = (data >> 8) | (*(uchar *) cp << 8);
+
+	return write_hword(info, wp, data);
+}
+
+#endif
diff --git a/board/netstar/nand.c b/board/netstar/nand.c
new file mode 100644
index 0000000..e5b7f33
--- /dev/null
+++ b/board/netstar/nand.c
@@ -0,0 +1,64 @@
+/*
+ * (C) Copyright 2005 2N TELEKOMUNIKACE, Ladislav Michl
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+#if (CONFIG_COMMANDS & CFG_CMD_NAND)
+
+#include <nand.h>
+
+/*
+ *	hardware specific access to control-lines
+ */
+#define	MASK_CLE	0x02
+#define	MASK_ALE	0x04
+
+static void netstar_nand_hwcontrol(struct mtd_info *mtd, int cmd)
+{
+	struct nand_chip *this = mtd->priv;
+	ulong IO_ADDR_W = (ulong) this->IO_ADDR_W;
+
+	IO_ADDR_W &= ~(MASK_ALE|MASK_CLE);
+	switch (cmd) {
+		case NAND_CTL_SETCLE: IO_ADDR_W |= MASK_CLE; break;
+		case NAND_CTL_SETALE: IO_ADDR_W |= MASK_ALE; break;
+	}
+	this->IO_ADDR_W = (void *) IO_ADDR_W;
+}
+
+/*
+ *	chip R/B detection
+ */
+static int netstar_nand_ready(struct mtd_info *mtd)
+{
+	return (*(volatile ushort *)GPIO_DATA_INPUT_REG) & 0x02;
+}
+
+void board_nand_init(struct nand_chip *nand)
+{
+	nand->options = NAND_SAMSUNG_LP_OPTIONS;
+	nand->eccmode = NAND_ECC_SOFT;
+	nand->hwcontrol = netstar_nand_hwcontrol;
+/*	nand->dev_ready = netstar_nand_ready; */
+	nand->chip_delay = 18;
+}
+#endif
diff --git a/board/netstar/netstar.c b/board/netstar/netstar.c
new file mode 100644
index 0000000..62615e5
--- /dev/null
+++ b/board/netstar/netstar.c
@@ -0,0 +1,68 @@
+/*
+ * (C) Copyright 2005 2N TELEKOMUNIKACE, Ladislav Michl
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+int board_init(void)
+{
+	DECLARE_GLOBAL_DATA_PTR;
+
+	/* arch number of NetStar board */
+	/* TODO: use define from asm/mach-types.h */
+	gd->bd->bi_arch_number = 692;
+
+	/* adress of boot parameters */
+	gd->bd->bi_boot_params = 0x10000100;
+
+	return 0;
+}
+
+int dram_init(void)
+{
+	DECLARE_GLOBAL_DATA_PTR;
+
+	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
+	gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
+
+	/* Take the Ethernet controller out of reset and wait
+	 * for the EEPROM load to complete. */
+	*((volatile unsigned short *) GPIO_DATA_OUTPUT_REG) |= 0x80;
+	udelay(10);	/* doesn't work before interrupt_init call */
+	*((volatile unsigned short *) GPIO_DATA_OUTPUT_REG) &= ~0x80;
+	udelay(500);
+
+	return 0;
+}
+
+extern void partition_flash(void);
+
+int misc_init_r(void)
+{
+	return 0;
+}
+
+extern void nand_init(void);
+
+int board_late_init(void)
+{
+	return 0;
+}
diff --git a/board/netstar/setup.S b/board/netstar/setup.S
new file mode 100644
index 0000000..82c0342
--- /dev/null
+++ b/board/netstar/setup.S
@@ -0,0 +1,287 @@
+/*
+ * Board specific setup info
+ *
+ * (C) Copyright 2004 Ales Jindra <jindra@2n.cz>
+ * (C) Copyright 2005 Ladislav Michl <michl@2n.cz>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+#include <version.h>
+
+_TEXT_BASE:
+	.word	TEXT_BASE	/* SDRAM load addr from config.mk */
+
+OMAP5910_LPG1_BASE:		.word 0xfffbd000
+OMAP5910_TIPB_SWITCHES_BASE:	.word 0xfffbc800
+OMAP5910_MPU_TC_BASE:		.word 0xfffecc00
+OMAP5910_MPU_CLKM_BASE:		.word 0xfffece00
+OMAP5910_ULPD_PWR_MNG_BASE:	.word 0xfffe0800
+OMAP5910_DPLL1_BASE:		.word 0xfffecf00
+OMAP5910_GPIO_BASE:		.word 0xfffce000
+OMAP5910_MPU_WD_TIMER_BASE:	.word 0xfffec800
+OMAP5910_MPUI_BASE:		.word 0xfffec900
+
+_OMAP5910_ARM_CKCTL:		.word OMAP5910_ARM_CKCTL
+_OMAP5910_ARM_EN_CLK:		.word OMAP5910_ARM_EN_CLK
+
+OMAP5910_MPUI_CTRL:		.word 0x0000ff1b
+
+VAL_EMIFS_CS0_CONFIG:		.word 0x00009090
+VAL_EMIFS_CS1_CONFIG:		.word 0x00003031
+VAL_EMIFS_CS2_CONFIG:		.word 0x0000a0a1
+VAL_EMIFS_CS3_CONFIG:		.word 0x0000c0c0
+VAL_EMIFS_DYN_WAIT:		.word 0x00000000
+/* autorefresh counter 0x246 ((64000000/13.4)-400)/8192) */
+				/*     SLRF       SD_RET     ARE        SDRAM_TYPE   ARCV           SDRAM_FREQUENCY PWD     CLK */
+
+#if (PHYS_SDRAM_1_SIZE == SZ_32M)
+VAL_EMIFF_SDRAM_CONFIG:		.word ((0 << 0) | (0 << 1) | (3 << 2) | (0xf << 4) | (0x246 << 8) | (0 << 24) | (0 << 26) | (0 << 27))
+#else
+VAL_EMIFF_SDRAM_CONFIG:		.word ((0 << 0) | (0 << 1) | (3 << 2) | (0xd << 4) | (0x246 << 8) | (0 << 24) | (0 << 26) | (0 << 27))
+#endif
+
+VAL_EMIFF_SDRAM_CONFIG2:	.word 0x00000003
+VAL_EMIFF_MRS:			.word 0x00000037
+
+/*
+ * GPIO04 - Green LED (Red LED is connected to LED Pulse Generator)
+ * GPIO07 - LAN91C111 reset
+ */
+GPIO_DIRECTION:
+	.word 0x0000ff6f
+/*
+ * Disable everything (green LED is connected via invertor)
+ */
+GPIO_OUTPUT:
+	.word 0x00000010
+
+MUX_CONFIG_BASE:
+	.word 0xfffe1000
+
+MUX_CONFIG_VALUES:
+	.align 4
+	.word 0x00000000	@ FUNC_MUX_CTRL_0
+	.word 0x00000000	@ FUNC_MUX_CTRL_1
+	.word 0x00000000	@ FUNC_MUX_CTRL_2
+	.word 0x00000000	@ FUNC_MUX_CTRL_3
+	.word 0x00000000	@ FUNC_MUX_CTRL_4
+	.word 0x02080480	@ FUNC_MUX_CTRL_5
+	.word 0x0100001c	@ FUNC_MUX_CTRL_6
+	.word 0x0004800b	@ FUNC_MUX_CTRL_7
+	.word 0x10001200	@ FUNC_MUX_CTRL_8
+	.word 0x01201012	@ FUNC_MUX_CTRL_9
+	.word 0x02082248	@ FUNC_MUX_CTRL_A
+	.word 0x00000248	@ FUNC_MUX_CTRL_B
+	.word 0x12240000	@ FUNC_MUX_CTRL_C
+	.word 0x00002000	@ FUNC_MUX_CTRL_D
+	.word 0x00000000	@ PULL_DWN_CTRL_0
+	.word 0x00000800	@ PULL_DWN_CTRL_1
+	.word 0x01801000	@ PULL_DWN_CTRL_2
+	.word 0x00000000	@ PULL_DWN_CTRL_3
+	.word 0x00000000	@ GATE_INH_CTRL_0
+	.word 0x00000000	@ VOLTAGE_CTRL_0
+	.word 0x00000000	@ TEST_DBG_CTRL_0
+	.word 0x00000006	@ MOD_CONF_CTRL_0
+	.word 0x0000eaef	@ COMP_MODE_CTRL_0
+
+MUX_CONFIG_OFFSETS:
+	.align 1
+	.byte 0x00		@ FUNC_MUX_CTRL_0
+	.byte 0x04		@ FUNC_MUX_CTRL_1
+	.byte 0x08		@ FUNC_MUX_CTRL_2
+	.byte 0x10		@ FUNC_MUX_CTRL_3
+	.byte 0x14		@ FUNC_MUX_CTRL_4
+	.byte 0x18		@ FUNC_MUX_CTRL_5
+	.byte 0x1c		@ FUNC_MUX_CTRL_6
+	.byte 0x20		@ FUNC_MUX_CTRL_7
+	.byte 0x24		@ FUNC_MUX_CTRL_8
+	.byte 0x28		@ FUNC_MUX_CTRL_9
+	.byte 0x2c		@ FUNC_MUX_CTRL_A
+	.byte 0x30		@ FUNC_MUX_CTRL_B
+	.byte 0x34		@ FUNC_MUX_CTRL_C
+	.byte 0x38		@ FUNC_MUX_CTRL_D
+	.byte 0x40		@ PULL_DWN_CTRL_0
+	.byte 0x44		@ PULL_DWN_CTRL_1
+	.byte 0x48		@ PULL_DWN_CTRL_2
+	.byte 0x4c		@ PULL_DWN_CTRL_3
+	.byte 0x50		@ GATE_INH_CTRL_0
+	.byte 0x60		@ VOLTAGE_CTRL_0
+	.byte 0x70		@ TEST_DBG_CTRL_0
+	.byte 0x80		@ MOD_CONF_CTRL_0
+	.byte 0x0c		@ COMP_MODE_CTRL_0
+	.byte 0xff
+
+.globl platformsetup
+platformsetup:
+	/* Improve performance a bit... */
+	mrc	p15, 0, r1, c0, c0, 0		@ read C15 ID register
+	mrc	p15, 0, r1, c0, c0, 1		@ read C15 Cache information register
+	mrc	p15, 0, r1, c1, c0, 0		@ read C15 Control register
+	orr	r1, r1, #0x1000			@ enable I-cache, map interrupt vector 0xffff0000
+	mcr	p15, 0, r1, c1, c0, 0		@ write C15 Control register
+	mov	r1, #0x00
+	mcr	p15, 0, r1, c7, c5, 0		@ Flush I-cache
+	nop
+	nop
+	nop
+	nop
+
+	/* Setup clocking mode */
+	ldr	r0, OMAP5910_MPU_CLKM_BASE	@ prepare base of CLOCK unit
+	ldrh	r1, [r0, #0x18]			@ get reset status
+	bic	r1, r1, #(7 << 11)		@ clear clock select
+	orr	r1, r1, #(2 << 11)		@ set synchronous scalable
+	mov	r2, #0				@ set wait counter to 100 clock cycles
+
+icache_loop:
+	cmp	r2, #0x01
+	streqh	r1, [r0, #0x18]
+	add	r2, r2, #0x01
+	cmp	r2, #0x10
+	bne	icache_loop
+	nop
+
+	/* Setup clock divisors */
+	ldr	r0, OMAP5910_MPU_CLKM_BASE	@ base of CLOCK unit
+	ldr	r1, _OMAP5910_ARM_CKCTL
+	orr	r1, r1, #0x2000			@ enable DSP clock
+	strh	r1, [r0, #0x00]			@ setup clock divisors
+
+	/* Setup DPLL to generate requested freq */
+	ldr	r0, OMAP5910_DPLL1_BASE		@ base of DPLL1 register
+	mov	r1, #0x0010			@ set PLL_ENABLE
+	orr	r1, r1, #0x2000			@ set IOB to new locking
+	orr	r1, r1, #(OMAP5910_DPLL_MUL << 7) @ setup multiplier CLKREF
+	orr	r1, r1, #(OMAP5910_DPLL_DIV << 5) @ setup divider CLKREF
+	strh	r1, [r0]			@ write
+
+locking:
+	ldrh	r1, [r0]			@ get DPLL value
+	tst	r1, #0x01
+	beq	locking				@ while LOCK not set
+
+	/* Enable clock */
+	ldr	r0, OMAP5910_MPU_CLKM_BASE	@ base of CLOCK unit
+	mov	r1, #(1 << 10)			@ disable idle mode do not check
+						@ nWAKEUP pin, other remain active
+	strh	r1, [r0, #0x04]
+	ldr	r1, _OMAP5910_ARM_EN_CLK
+	strh	r1, [r0, #0x08]
+	mov	r1, #0x003f			@ FLASH.RP not enabled in idle and
+						@ max delayed ( 32 x CLKIN )
+	strh	r1, [r0, #0x0c]
+
+	/* Configure 5910 pins functions to match our board. */
+	ldr     r0, MUX_CONFIG_BASE
+	adr	r1, MUX_CONFIG_VALUES
+	adr	r2, MUX_CONFIG_OFFSETS
+next_mux_cfg:
+	ldrb	r3, [r2], #1
+	ldr	r4, [r1], #4
+	cmp	r3, #0xff
+	strne	r4, [r0, r3]
+	bne	next_mux_cfg
+
+	/* Configure GPIO pins (also disables Green LED) */
+	ldr	r0, OMAP5910_GPIO_BASE
+	ldr	r1, GPIO_OUTPUT
+	strh    r1, [r0, #0x04]
+	ldr	r1, GPIO_DIRECTION
+	strh	r1, [r0, #0x08]
+
+	/* EnablePeripherals */
+	ldr	r0, OMAP5910_MPU_CLKM_BASE	@ CLOCK unit
+	mov	r1, #0x0001			@ Peripheral enable
+	strh	r1, [r0, #0x14]
+
+	/* Program LED Pulse Generator */
+	ldr	r0, OMAP5910_LPG1_BASE		@ 1st LED Pulse Generator
+	mov	r1, #0x7F			@ Set obscure frequency in
+	strb	r1, [r0, #0x00]			@ LCR
+	mov	r1, #0x01			@ Enable clock (CLK_EN) in
+	strb    r1, [r0, #0x04]			@ PMR
+
+	/* TIPB Lock UART1 */
+	ldr	r0, OMAP5910_TIPB_SWITCHES_BASE	@ prepare base of TIPB switches
+	mov	r1, #1				@ ARM allocated
+	strh	r1, [r0,#0x04]			@ clear IRQ line and status bits
+	strh	r1, [r0,#0x00]
+	ldrh	r1, [r0,#0x04]
+
+	/* Disable watchdog */
+	ldr	r0, OMAP5910_MPU_WD_TIMER_BASE
+	mov	r1, #0xf5
+	strh	r1, [r0, #0x8]
+	mov	r1, #0xa0
+	strh	r1, [r0, #0x8]
+
+	/* Enable MCLK */
+	ldr	r0, OMAP5910_ULPD_PWR_MNG_BASE
+	mov	r1, #0x6
+	strh	r1, [r0, #0x34]
+	strh	r1, [r0, #0x34]
+
+	/* Setup clock divisors */
+	ldr	r0, OMAP5910_ULPD_PWR_MNG_BASE	@ base of ULDPL DPLL1 register
+
+	mov	r1, #0x0010			@ set PLL_ENABLE
+	orr	r1, r1, #0x2000			@ set IOB to new locking
+	strh	r1, [r0]			@ write
+
+ulocking:
+	ldrh	r1, [r0]			@ get DPLL value
+	tst	r1, #1
+	beq	ulocking			@ while LOCK not set
+
+	/* EMIF init */
+	ldr	r0, OMAP5910_MPU_TC_BASE
+	ldrh	r1, [r0, #0x0c]			@ EMIFS_CONFIG_REG
+	bic	r1, r1, #0x0c			@ pwr down disabled, flash WP
+	orr	r1, r1, #0x01
+	str	r1, [r0, #0x0c]
+
+	ldr	r1, VAL_EMIFS_CS0_CONFIG
+	str	r1, [r0, #0x10]			@ EMIFS_CS0_CONFIG
+	ldr	r1, VAL_EMIFS_CS1_CONFIG
+	str	r1, [r0, #0x14]			@ EMIFS_CS1_CONFIG
+	ldr	r1, VAL_EMIFS_CS2_CONFIG
+	str	r1, [r0, #0x18]			@ EMIFS_CS2_CONFIG
+	ldr	r1, VAL_EMIFS_CS3_CONFIG
+	str	r1, [r0, #0x1c]			@ EMIFS_CS3_CONFIG
+	ldr	r1, VAL_EMIFS_DYN_WAIT
+	str	r1, [r0, #0x40]			@ EMIFS_CFG_DYN_WAIT
+
+	/* Setup SDRAM */
+	ldr	r1, VAL_EMIFF_SDRAM_CONFIG
+	str	r1, [r0, #0x20]			@ EMIFF_SDRAM_CONFIG
+	ldr	r1, VAL_EMIFF_SDRAM_CONFIG2
+	str	r1, [r0, #0x3c]			@ EMIFF_SDRAM_CONFIG2
+	ldr	r1, VAL_EMIFF_MRS
+	str	r1, [r0, #0x24]			@ EMIFF_MRS
+	/* SDRAM needs 100us to stabilize */
+	mov	r0, #0x4000
+sdelay:
+	subs	r0, r0, #0x1
+	bne 	sdelay
+
+	/* back to arch calling code */
+	mov	pc, lr
+.end
diff --git a/board/netstar/u-boot.lds b/board/netstar/u-boot.lds
new file mode 100644
index 0000000..8317f72
--- /dev/null
+++ b/board/netstar/u-boot.lds
@@ -0,0 +1,55 @@
+/*
+ * (C) Copyright 2002
+ * Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
+OUTPUT_ARCH(arm)
+ENTRY(_start)
+SECTIONS
+{
+	. = 0x00000000;
+
+	. = ALIGN(4);
+	.text      :
+	{
+	  cpu/arm925t/start.o	(.text)
+	  *(.text)
+	}
+
+	. = ALIGN(4);
+	.rodata : { *(.rodata) }
+
+	. = ALIGN(4);
+	.data : { *(.data) }
+
+	. = ALIGN(4);
+	.got : { *(.got) }
+
+	__u_boot_cmd_start = .;
+	.u_boot_cmd : { *(.u_boot_cmd) }
+	__u_boot_cmd_end = .;
+
+	. = ALIGN(4);
+	__bss_start = .;
+	.bss : { *(.bss) }
+	_end = .;
+}
diff --git a/common/cmd_jffs2.c b/common/cmd_jffs2.c
index 7ab6e9c..bc63f0c 100644
--- a/common/cmd_jffs2.c
+++ b/common/cmd_jffs2.c
@@ -99,6 +99,10 @@
 
 #include <cramfs/cramfs_fs.h>
 
+#ifdef CONFIG_NEW_NAND_CODE
+#include <nand.h>
+#endif
+
 /* enable/disable debugging messages */
 #define	DEBUG
 #undef	DEBUG
@@ -324,10 +328,9 @@ static int part_validate_nand(struct mtdids *id, struct part_info *part)
 {
 #if defined(CONFIG_JFFS2_NAND) && (CONFIG_COMMANDS & CFG_CMD_NAND)
 	/* info for NAND chips */
-	extern struct nand_chip nand_dev_desc[CFG_MAX_NAND_DEVICE];
-	struct nand_chip *nand;
+	nand_info_t *nand;
 
-	nand = &nand_dev_desc[id->num];
+	nand = &nand_info[id->num];
 
 	if ((unsigned long)(part->offset) % nand->erasesize) {
 		printf("%s%d: partition (%s) start offset alignment incorrect\n",
@@ -422,8 +425,9 @@ static int part_del(struct mtd_device *dev, struct part_info *part)
 		}
 	}
 
-
+#ifndef CONFIG_NEW_NAND_CODE
 	jffs2_free_cache(part);
+#endif
 	list_del(&part->link);
 	free(part);
 	dev->num_parts--;
@@ -445,7 +449,9 @@ static void part_delall(struct list_head *head)
 	list_for_each_safe(entry, n, head) {
 		part_tmp = list_entry(entry, struct part_info, link);
 
+#ifndef CONFIG_NEW_NAND_CODE
 		jffs2_free_cache(part_tmp);
+#endif
 		list_del(entry);
 		free(part_tmp);
 	}
@@ -661,6 +667,7 @@ static int device_validate(u8 type, u8 num, u32 *size)
 		if (num < CFG_MAX_FLASH_BANKS) {
 			extern flash_info_t flash_info[CFG_MAX_FLASH_BANKS];
 			*size = flash_info[num].size;
+
 			return 0;
 		}
 
@@ -672,8 +679,12 @@ static int device_validate(u8 type, u8 num, u32 *size)
 	} else if (type == MTD_DEV_TYPE_NAND) {
 #if defined(CONFIG_JFFS2_NAND) && (CONFIG_COMMANDS & CFG_CMD_NAND)
 		if (num < CFG_MAX_NAND_DEVICE) {
+#ifdef CONFIG_NEW_NAND_CODE
+			*size = nand_info[num].size;
+#else
 			extern struct nand_chip nand_dev_desc[CFG_MAX_NAND_DEVICE];
 			*size = nand_dev_desc[num].totlen;
+#endif
 			return 0;
 		}
 
diff --git a/common/cmd_nand.c b/common/cmd_nand.c
index ae4c68a..0c05255 100644
--- a/common/cmd_nand.c
+++ b/common/cmd_nand.c
@@ -1,15 +1,18 @@
 /*
- * Rick Bronson and Pantelis Antoniou
+ * Driver for NAND support, Rick Bronson
+ * borrowed heavily from:
+ * (c) 1999 Machine Vision Holdings, Inc.
+ * (c) 1999, 2000 David Woodhouse <dwmw2@infradead.org>
+ *
+ * Added 16-bit nand support
+ * (C) 2004 Texas Instruments
  */
 
 #include <common.h>
-
-#if (CONFIG_COMMANDS & CFG_CMD_NAND)
-
 #include <command.h>
-#include <watchdog.h>
 #include <malloc.h>
-#include <asm/byteorder.h>
+#include <asm/io.h>
+#include <watchdog.h>
 
 #ifdef CONFIG_SHOW_BOOT_PROGRESS
 # include <status_led.h>
@@ -18,311 +21,290 @@
 # define SHOW_BOOT_PROGRESS(arg)
 #endif
 
-#include <jffs2/jffs2.h>
-#include <nand.h>
-
-extern nand_info_t nand_info[];       /* info for NAND chips */
+#if (CONFIG_COMMANDS & CFG_CMD_NAND) && !defined CONFIG_NEW_NAND_CODE
 
-static int nand_dump_oob(nand_info_t *nand, ulong off)
-{
-	return 0;
-}
-
-static int nand_dump(nand_info_t *nand, ulong off)
-{
-	int i;
-	u_char *buf, *p;
-
-	buf = malloc(nand->oobblock + nand->oobsize);
-	if (!buf) {
-		puts("No memory for page buffer\n");
-		return 1;
-	}
-	off &= ~(nand->oobblock - 1);
-	i = nand_read_raw(nand, buf, off, nand->oobblock, nand->oobsize);
-	if (i < 0) {
-		printf("Error (%d) reading page %08x\n", i, off);
-		free(buf);
-		return 1;
-	}
-	printf("Page %08x dump:\n", off);
-	i = nand->oobblock >> 4; p = buf;
-	while (i--) {
-		printf( "\t%02x %02x %02x %02x %02x %02x %02x %02x"
-			"  %02x %02x %02x %02x %02x %02x %02x %02x\n",
-			p[0], p[1], p[2], p[3], p[4], p[5], p[6], p[7],
-			p[8], p[9], p[10], p[11], p[12], p[13], p[14], p[15]);
-		p += 16;
-	}
-	puts("OOB:\n");
-	i = nand->oobsize >> 3;
-	while (i--) {
-		printf( "\t%02x %02x %02x %02x %02x %02x %02x %02x\n",
-			p[0], p[1], p[2], p[3], p[4], p[5], p[6], p[7]);
-		p += 8;
-	}
-	free(buf);
+#include <linux/mtd/nand.h>
+#include <linux/mtd/nand_ids.h>
+#include <jffs2/jffs2.h>
 
-	return 0;
-}
+#ifdef CONFIG_OMAP1510
+void archflashwp(void *archdata, int wp);
+#endif
 
-/* ------------------------------------------------------------------------- */
+#define ROUND_DOWN(value,boundary)      ((value) & (~((boundary)-1)))
 
-static void
-arg_off_size(int argc, char *argv[], ulong *off, ulong *size, ulong totsize)
-{
-	*off = 0;
-	*size = 0;
+/*
+ * Definition of the out of band configuration structure
+ */
+struct nand_oob_config {
+	int ecc_pos[6];		/* position of ECC bytes inside oob */
+	int badblock_pos;	/* position of bad block flag inside oob -1 = inactive */
+	int eccvalid_pos;	/* position of ECC valid flag inside oob -1 = inactive */
+} oob_config = { {0}, 0, 0};
+
+#undef	NAND_DEBUG
+#undef	PSYCHO_DEBUG
+
+/* ****************** WARNING *********************
+ * When ALLOW_ERASE_BAD_DEBUG is non-zero the erase command will
+ * erase (or at least attempt to erase) blocks that are marked
+ * bad. This can be very handy if you are _sure_ that the block
+ * is OK, say because you marked a good block bad to test bad
+ * block handling and you are done testing, or if you have
+ * accidentally marked blocks bad.
+ *
+ * Erasing factory marked bad blocks is a _bad_ idea. If the
+ * erase succeeds there is no reliable way to find them again,
+ * and attempting to program or erase bad blocks can affect
+ * the data in _other_ (good) blocks.
+ */
+#define	 ALLOW_ERASE_BAD_DEBUG 0
 
-#if defined(CONFIG_JFFS2_NAND) && defined(CFG_JFFS_CUSTOM_PART)
-	if (argc >= 1 && strcmp(argv[0], "partition") == 0) {
-		int part_num;
-		struct part_info *part;
-		const char *partstr;
+#define CONFIG_MTD_NAND_ECC  /* enable ECC */
+#define CONFIG_MTD_NAND_ECC_JFFS2
 
-		if (argc >= 2)
-			partstr = argv[1];
-		else
-			partstr = getenv("partition");
+/* bits for nand_rw() `cmd'; or together as needed */
+#define NANDRW_READ	0x01
+#define NANDRW_WRITE	0x00
+#define NANDRW_JFFS2	0x02
+#define NANDRW_JFFS2_SKIP	0x04
 
-		if (partstr)
-			part_num = (int)simple_strtoul(partstr, NULL, 10);
-		else
-			part_num = 0;
-
-		part = jffs2_part_info(part_num);
-		if (part == NULL) {
-			printf("\nInvalid partition %d\n", part_num);
-			return;
-		}
-		*size = part->size;
-		*off = (ulong)part->offset;
-	} else
+/*
+ * Function Prototypes
+ */
+static void nand_print(struct nand_chip *nand);
+int nand_rw (struct nand_chip* nand, int cmd,
+	    size_t start, size_t len,
+	    size_t * retlen, u_char * buf);
+int nand_erase(struct nand_chip* nand, size_t ofs, size_t len, int clean);
+static int nand_read_ecc(struct nand_chip *nand, size_t start, size_t len,
+		 size_t * retlen, u_char *buf, u_char *ecc_code);
+static int nand_write_ecc (struct nand_chip* nand, size_t to, size_t len,
+			   size_t * retlen, const u_char * buf, u_char * ecc_code);
+static void nand_print_bad(struct nand_chip *nand);
+static int nand_read_oob(struct nand_chip* nand, size_t ofs, size_t len,
+		 size_t * retlen, u_char * buf);
+static int nand_write_oob(struct nand_chip* nand, size_t ofs, size_t len,
+		 size_t * retlen, const u_char * buf);
+static int NanD_WaitReady(struct nand_chip *nand, int ale_wait);
+#ifdef CONFIG_MTD_NAND_ECC
+static int nand_correct_data (u_char *dat, u_char *read_ecc, u_char *calc_ecc);
+static void nand_calculate_ecc (const u_char *dat, u_char *ecc_code);
 #endif
-	{
-		if (argc >= 1)
-			*off = (ulong)simple_strtoul(argv[0], NULL, 16);
-		else
-			*off = 0;
 
-		if (argc >= 2)
-			*size = (ulong)simple_strtoul(argv[1], NULL, 16);
-		else
-			*size = totsize - *off;
+struct nand_chip nand_dev_desc[CFG_MAX_NAND_DEVICE] = {{0}};
 
-	}
+/* Current NAND Device	*/
+static int curr_device = -1;
 
-}
+/* ------------------------------------------------------------------------- */
 
-int do_nand(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
+int do_nand (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 {
-	int i, dev, ret;
-	ulong addr, off, size;
-	char *cmd, *s;
-	nand_info_t *nand;
+    int rcode = 0;
 
-	/* at least two arguments please */
-	if (argc < 2)
-		goto usage;
-
-	cmd = argv[1];
+    switch (argc) {
+    case 0:
+    case 1:
+	printf ("Usage:\n%s\n", cmdtp->usage);
+	return 1;
+    case 2:
+	if (strcmp(argv[1],"info") == 0) {
+		int i;
 
-	if (strcmp(cmd, "info") == 0) {
+		putc ('\n');
 
-		putc('\n');
-		for (i = 0; i < CFG_MAX_NAND_DEVICE; i++) {
-			if (nand_info[i].name)
-				printf("Device %d: %s\n", i, nand_info[i].name);
+		for (i=0; i<CFG_MAX_NAND_DEVICE; ++i) {
+			if(nand_dev_desc[i].ChipID == NAND_ChipID_UNKNOWN)
+				continue; /* list only known devices */
+			printf ("Device %d: ", i);
+			nand_print(&nand_dev_desc[i]);
 		}
 		return 0;
-	}
 
-	if (strcmp(cmd, "device") == 0) {
-
-		if (argc < 3) {
-			if ((nand_curr_device < 0) ||
-			    (nand_curr_device >= CFG_MAX_NAND_DEVICE))
-				puts("\nno devices available\n");
-			else
-				printf("\nDevice %d: %s\n", nand_curr_device,
-					nand_info[nand_curr_device].name);
-			return 0;
-		}
-		dev = (int)simple_strtoul(argv[2], NULL, 10);
-		if (dev < 0 || dev >= CFG_MAX_NAND_DEVICE || !nand_info[dev].name) {
-			puts("No such device\n");
+	} else if (strcmp(argv[1],"device") == 0) {
+		if ((curr_device < 0) || (curr_device >= CFG_MAX_NAND_DEVICE)) {
+			puts ("\nno devices available\n");
 			return 1;
 		}
-		printf("Device %d: %s", dev, nand_info[dev].name);
-		puts("... is now current device\n");
-		nand_curr_device = dev;
+		printf ("\nDevice %d: ", curr_device);
+		nand_print(&nand_dev_desc[curr_device]);
 		return 0;
-	}
-
-	if (strcmp(cmd, "bad") != 0 && strcmp(cmd, "erase") != 0 &&
-	    strncmp(cmd, "dump", 4) != 0 &&
-	    strncmp(cmd, "read", 4) != 0 && strncmp(cmd, "write", 5) != 0
-#ifdef CONFIG_MTD_NAND_UNSAFE
-	    && strcmp(cmd, "scrub") != 0 && strcmp(cmd, "biterr") != 0
-	    && strcmp(cmd, "markbad") != 0
-#endif
-	    )
-		goto usage;
-
-	/* the following commands operate on the current device */
-	if (nand_curr_device < 0 || nand_curr_device >= CFG_MAX_NAND_DEVICE ||
-	    !nand_info[nand_curr_device].name) {
-		puts("\nno devices available\n");
-		return 1;
-	}
-	nand = &nand_info[nand_curr_device];
 
-	if (strcmp(cmd, "bad") == 0) {
-		printf("\nDevice %d bad blocks:\n", nand_curr_device);
-		for (off = 0; off < nand->size; off += nand->erasesize)
-			if (nand_block_isbad(nand, off))
-				printf("  %08x\n", off);
+	} else if (strcmp(argv[1],"bad") == 0) {
+		if ((curr_device < 0) || (curr_device >= CFG_MAX_NAND_DEVICE)) {
+			puts ("\nno devices available\n");
+			return 1;
+		}
+		printf ("\nDevice %d bad blocks:\n", curr_device);
+		nand_print_bad(&nand_dev_desc[curr_device]);
 		return 0;
-	}
-
-	if (strcmp(cmd, "erase") == 0
-#ifdef CONFIG_MTD_NAND_UNSAFE
-	    || strcmp(cmd, "scrub") == 0
-#endif
-	    ) {
 
-#ifdef CONFIG_MTD_NAND_UNSAFE
-		i = strcmp(cmd, "scrub") == 0;	/* 1 scrub, 0 = erase */
-#endif
+	}
+	printf ("Usage:\n%s\n", cmdtp->usage);
+	return 1;
+    case 3:
+	if (strcmp(argv[1],"device") == 0) {
+		int dev = (int)simple_strtoul(argv[2], NULL, 10);
 
-		arg_off_size(argc - 2, argv + 2, &off, &size, nand->size);
-		if (off == 0 && size == 0)
+		printf ("\nDevice %d: ", dev);
+		if (dev >= CFG_MAX_NAND_DEVICE) {
+			puts ("unknown device\n");
 			return 1;
+		}
+		nand_print(&nand_dev_desc[dev]);
+		/*nand_print (dev);*/
 
-		printf("\nNAND %s: device %d offset 0x%x, size 0x%x ",
-#ifdef CONFIG_MTD_NAND_UNSAFE
-		       i ? "scrub" :
-#endif
-		       "erase",
-		       nand_curr_device, off, size);
+		if (nand_dev_desc[dev].ChipID == NAND_ChipID_UNKNOWN) {
+			return 1;
+		}
 
-#ifdef CONFIG_MTD_NAND_UNSAFE
-		if (i)
-			ret = nand_scrub(nand, off, size);
-		else
-#endif
-			ret = nand_erase(nand, off, size);
+		curr_device = dev;
 
-		printf("%s\n", ret ? "ERROR" : "OK");
+		puts ("... is now current device\n");
 
-		return ret == 0 ? 0 : 1;
+		return 0;
 	}
+	else if (strcmp(argv[1],"erase") == 0 && strcmp(argv[2], "clean") == 0) {
+		struct nand_chip* nand = &nand_dev_desc[curr_device];
+		ulong off = 0;
+		ulong size = nand->totlen;
+		int ret;
 
-	if (strncmp(cmd, "dump", 4) == 0) {
-		if (argc < 3)
-			goto usage;
+		printf ("\nNAND erase: device %d offset %ld, size %ld ... ",
+			curr_device, off, size);
 
-		s = strchr(cmd, '.');
-		off = (int)simple_strtoul(argv[2], NULL, 16);
+		ret = nand_erase (nand, off, size, 1);
 
-		if (s != NULL && strcmp(s, ".oob") == 0)
-			ret = nand_dump_oob(nand, off);
-		else
-			ret = nand_dump(nand, off);
-
-		return ret == 0 ? 1 : 0;
+		printf("%s\n", ret ? "ERROR" : "OK");
 
+		return ret;
 	}
 
-	/* read write */
-	if (strncmp(cmd, "read", 4) == 0 || strncmp(cmd, "write", 5) == 0) {
-		if (argc < 4)
-			goto usage;
-/*
-		s = strchr(cmd, '.');
-		clean = CLEAN_NONE;
-		if (s != NULL) {
-			if (strcmp(s, ".jffs2") == 0 || strcmp(s, ".e") == 0
-			    || strcmp(s, ".i"))
-				clean = CLEAN_JFFS2;
-		}
-*/
-		addr = (ulong)simple_strtoul(argv[2], NULL, 16);
-
-		arg_off_size(argc - 3, argv + 3, &off, &size, nand->size);
-		if (off == 0 && size == 0)
+	printf ("Usage:\n%s\n", cmdtp->usage);
+	return 1;
+    default:
+	/* at least 4 args */
+
+	if (strncmp(argv[1], "read", 4) == 0 ||
+	    strncmp(argv[1], "write", 5) == 0) {
+		ulong addr = simple_strtoul(argv[2], NULL, 16);
+		ulong off  = simple_strtoul(argv[3], NULL, 16);
+		ulong size = simple_strtoul(argv[4], NULL, 16);
+		int cmd    = (strncmp(argv[1], "read", 4) == 0) ?
+				NANDRW_READ : NANDRW_WRITE;
+		int ret, total;
+		char* cmdtail = strchr(argv[1], '.');
+
+		if (cmdtail && !strncmp(cmdtail, ".oob", 2)) {
+			/* read out-of-band data */
+			if (cmd & NANDRW_READ) {
+				ret = nand_read_oob(nand_dev_desc + curr_device,
+						    off, size, &total,
+						    (u_char*)addr);
+			}
+			else {
+				ret = nand_write_oob(nand_dev_desc + curr_device,
+						     off, size, &total,
+						     (u_char*)addr);
+			}
+			return ret;
+		}
+		else if (cmdtail && !strncmp(cmdtail, ".jffs2", 2))
+			cmd |= NANDRW_JFFS2;	/* skip bad blocks */
+		else if (cmdtail && !strncmp(cmdtail, ".jffs2s", 2)) {
+			cmd |= NANDRW_JFFS2;	/* skip bad blocks (on read too) */
+			if (cmd & NANDRW_READ)
+				cmd |= NANDRW_JFFS2_SKIP;	/* skip bad blocks (on read too) */
+		}
+#ifdef SXNI855T
+		/* need ".e" same as ".j" for compatibility with older units */
+		else if (cmdtail && !strcmp(cmdtail, ".e"))
+			cmd |= NANDRW_JFFS2;	/* skip bad blocks */
+#endif
+#ifdef CFG_NAND_SKIP_BAD_DOT_I
+		/* need ".i" same as ".jffs2s" for compatibility with older units (esd) */
+		/* ".i" for image -> read skips bad block (no 0xff) */
+		else if (cmdtail && !strcmp(cmdtail, ".i")) {
+			cmd |= NANDRW_JFFS2;	/* skip bad blocks (on read too) */
+			if (cmd & NANDRW_READ)
+				cmd |= NANDRW_JFFS2_SKIP;	/* skip bad blocks (on read too) */
+		}
+#endif /* CFG_NAND_SKIP_BAD_DOT_I */
+		else if (cmdtail) {
+			printf ("Usage:\n%s\n", cmdtp->usage);
 			return 1;
+		}
 
-		i = strncmp(cmd, "read", 4) == 0;	/* 1 = read, 0 = write */
-		printf("\nNAND %s: device %d offset %u, size %u ... ",
-		       i ? "read" : "write", nand_curr_device, off, size);
+		printf ("\nNAND %s: device %d offset %ld, size %ld ... ",
+			(cmd & NANDRW_READ) ? "read" : "write",
+			curr_device, off, size);
 
-		if (i)
-			ret = nand_read(nand, off, &size, (u_char *)addr);
-		else
-			ret = nand_write(nand, off, &size, (u_char *)addr);
+		ret = nand_rw(nand_dev_desc + curr_device, cmd, off, size,
+			     &total, (u_char*)addr);
 
-		printf(" %d bytes %s: %s\n", size,
-		       i ? "read" : "written", ret ? "ERROR" : "OK");
+		printf (" %d bytes %s: %s\n", total,
+			(cmd & NANDRW_READ) ? "read" : "written",
+			ret ? "ERROR" : "OK");
 
-		return ret == 0 ? 0 : 1;
-	}
-#ifdef CONFIG_MTD_NAND_UNSAFE
-	if (strcmp(cmd, "markbad") == 0 || strcmp(cmd, "biterr") == 0) {
-		if (argc < 3)
-			goto usage;
+		return ret;
+	} else if (strcmp(argv[1],"erase") == 0 &&
+		   (argc == 4 || strcmp("clean", argv[2]) == 0)) {
+		int clean = argc == 5;
+		ulong off = simple_strtoul(argv[2 + clean], NULL, 16);
+		ulong size = simple_strtoul(argv[3 + clean], NULL, 16);
+		int ret;
 
-		i = strcmp(cmd, "biterr") == 0;
+		printf ("\nNAND erase: device %d offset %ld, size %ld ... ",
+			curr_device, off, size);
 
-		off = (int)simple_strtoul(argv[2], NULL, 16);
+		ret = nand_erase (nand_dev_desc + curr_device, off, size, clean);
 
-		if (i)
-			ret = nand_make_bit_error(nand, off);
-		else
-			ret = nand_mark_bad(nand, off);
+		printf("%s\n", ret ? "ERROR" : "OK");
 
-		return ret == 0 ? 0 : 1;
+		return ret;
+	} else {
+		printf ("Usage:\n%s\n", cmdtp->usage);
+		rcode = 1;
 	}
-#endif
 
-usage:
-	printf("Usage:\n%s\n", cmdtp->usage);
-	return 1;
+	return rcode;
+    }
 }
 
-U_BOOT_CMD(nand, 5, 1, do_nand,
+U_BOOT_CMD(
+	nand,	5,	1,	do_nand,
 	"nand    - NAND sub-system\n",
-	"info                  - show available NAND devices\n"
-	"nand device [dev]     - show or set current device\n"
-	"nand read[.jffs2]     - addr off size\n"
-	"nand write[.jffs2]    - addr off size - read/write `size' bytes starting\n"
+	"info  - show available NAND devices\n"
+	"nand device [dev] - show or set current device\n"
+	"nand read[.jffs2[s]]  addr off size\n"
+	"nand write[.jffs2] addr off size - read/write `size' bytes starting\n"
 	"    at offset `off' to/from memory address `addr'\n"
 	"nand erase [clean] [off size] - erase `size' bytes from\n"
 	"    offset `off' (entire device if not specified)\n"
 	"nand bad - show bad blocks\n"
-	"nand dump[.oob] off - dump page\n"
-	"nand scrub - really clean NAND erasing bad blocks (UNSAFE)\n"
-	"nand markbad off - mark bad block at offset (UNSAFE)\n"
-	"nand biterr off - make a bit error at offset (UNSAFE)\n");
+	"nand read.oob addr off size - read out-of-band data\n"
+	"nand write.oob addr off size - read out-of-band data\n"
+);
 
-int do_nandboot(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
+int do_nandboot (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 {
 	char *boot_device = NULL;
 	char *ep;
 	int dev;
-	int r;
-	ulong addr, cnt, offset = 0;
+	ulong cnt;
+	ulong addr;
+	ulong offset = 0;
 	image_header_t *hdr;
-	nand_info_t *nand;
-
+	int rcode = 0;
 	switch (argc) {
 	case 1:
 		addr = CFG_LOAD_ADDR;
-		boot_device = getenv("bootdevice");
+		boot_device = getenv ("bootdevice");
 		break;
 	case 2:
 		addr = simple_strtoul(argv[1], NULL, 16);
-		boot_device = getenv("bootdevice");
+		boot_device = getenv ("bootdevice");
 		break;
 	case 3:
 		addr = simple_strtoul(argv[1], NULL, 16);
@@ -334,53 +316,55 @@ int do_nandboot(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
 		offset = simple_strtoul(argv[3], NULL, 16);
 		break;
 	default:
-		printf("Usage:\n%s\n", cmdtp->usage);
-		SHOW_BOOT_PROGRESS(-1);
+		printf ("Usage:\n%s\n", cmdtp->usage);
+		SHOW_BOOT_PROGRESS (-1);
 		return 1;
 	}
 
 	if (!boot_device) {
-		puts("\n** No boot device **\n");
-		SHOW_BOOT_PROGRESS(-1);
+		puts ("\n** No boot device **\n");
+		SHOW_BOOT_PROGRESS (-1);
 		return 1;
 	}
 
 	dev = simple_strtoul(boot_device, &ep, 16);
 
-	if (dev < 0 || dev >= CFG_MAX_NAND_DEVICE || !nand_info[dev].name) {
-		printf("\n** Device %d not available\n", dev);
-		SHOW_BOOT_PROGRESS(-1);
+	if ((dev >= CFG_MAX_NAND_DEVICE) ||
+	    (nand_dev_desc[dev].ChipID == NAND_ChipID_UNKNOWN)) {
+		printf ("\n** Device %d not available\n", dev);
+		SHOW_BOOT_PROGRESS (-1);
 		return 1;
 	}
 
-	nand = &nand_info[dev];
-	printf("\nLoading from device %d: %s (offset 0x%lx)\n",
-	       dev, nand->name, offset);
+	printf ("\nLoading from device %d: %s at 0x%lx (offset 0x%lx)\n",
+		dev, nand_dev_desc[dev].name, nand_dev_desc[dev].IO_ADDR,
+		offset);
 
-	cnt = nand->oobblock;
-	r = nand_read(nand, offset, &cnt, (u_char *) addr);
-	if (r) {
-		printf("** Read error on %d\n", dev);
-		SHOW_BOOT_PROGRESS(-1);
+	if (nand_rw (nand_dev_desc + dev, NANDRW_READ, offset,
+		    SECTORSIZE, NULL, (u_char *)addr)) {
+		printf ("** Read error on %d\n", dev);
+		SHOW_BOOT_PROGRESS (-1);
 		return 1;
 	}
 
-	hdr = (image_header_t *) addr;
+	hdr = (image_header_t *)addr;
 
-	if (ntohl(hdr->ih_magic) != IH_MAGIC) {
-		printf("\n** Bad Magic Number 0x%x **\n", hdr->ih_magic);
-		SHOW_BOOT_PROGRESS(-1);
-		return 1;
-	}
+	if (ntohl(hdr->ih_magic) == IH_MAGIC) {
 
-	print_image_hdr(hdr);
+		print_image_hdr (hdr);
 
-	cnt = (ntohl(hdr->ih_size) + sizeof (image_header_t));
+		cnt = (ntohl(hdr->ih_size) + sizeof(image_header_t));
+		cnt -= SECTORSIZE;
+	} else {
+		printf ("\n** Bad Magic Number 0x%x **\n", hdr->ih_magic);
+		SHOW_BOOT_PROGRESS (-1);
+		return 1;
+	}
 
-	r = nand_read(nand, offset, &cnt, (u_char *) addr);
-	if (r) {
-		printf("** Read error on %d\n", dev);
-		SHOW_BOOT_PROGRESS(-1);
+	if (nand_rw (nand_dev_desc + dev, NANDRW_READ, offset + SECTORSIZE, cnt,
+		    NULL, (u_char *)(addr+SECTORSIZE))) {
+		printf ("** Read error on %d\n", dev);
+		SHOW_BOOT_PROGRESS (-1);
 		return 1;
 	}
 
@@ -389,24 +373,1526 @@ int do_nandboot(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
 	load_addr = addr;
 
 	/* Check if we should attempt an auto-start */
-	if (((ep = getenv("autostart")) != NULL) && (strcmp(ep, "yes") == 0)) {
+	if (((ep = getenv("autostart")) != NULL) && (strcmp(ep,"yes") == 0)) {
 		char *local_args[2];
-		extern int do_bootm(cmd_tbl_t *, int, int, char *[]);
+		extern int do_bootm (cmd_tbl_t *, int, int, char *[]);
 
 		local_args[0] = argv[0];
 		local_args[1] = NULL;
 
-		printf("Automatic boot of image at addr 0x%08lx ...\n", addr);
+		printf ("Automatic boot of image at addr 0x%08lx ...\n", addr);
+
+		do_bootm (cmdtp, 0, 1, local_args);
+		rcode = 1;
+	}
+	return rcode;
+}
+
+U_BOOT_CMD(
+	nboot,	4,	1,	do_nandboot,
+	"nboot   - boot from NAND device\n",
+	"loadAddr dev\n"
+);
 
-		do_bootm(cmdtp, 0, 1, local_args);
+/* returns 0 if block containing pos is OK:
+ *		valid erase block and
+ *		not marked bad, or no bad mark position is specified
+ * returns 1 if marked bad or otherwise invalid
+ */
+int check_block (struct nand_chip *nand, unsigned long pos)
+{
+	int retlen;
+	uint8_t oob_data;
+	uint16_t oob_data16[6];
+	int page0 = pos & (-nand->erasesize);
+	int page1 = page0 + nand->oobblock;
+	int badpos = oob_config.badblock_pos;
+
+	if (pos >= nand->totlen)
 		return 1;
+
+	if (badpos < 0)
+		return 0;	/* no way to check, assume OK */
+
+	if (nand->bus16) {
+		if (nand_read_oob(nand, (page0 + 0), 12, &retlen, (uint8_t *)oob_data16)
+		    || (oob_data16[2] & 0xff00) != 0xff00)
+			return 1;
+		if (nand_read_oob(nand, (page1 + 0), 12, &retlen, (uint8_t *)oob_data16)
+		    || (oob_data16[2] & 0xff00) != 0xff00)
+			return 1;
+	} else {
+		/* Note - bad block marker can be on first or second page */
+		if (nand_read_oob(nand, page0 + badpos, 1, &retlen, &oob_data)
+		    || oob_data != 0xff
+		    || nand_read_oob (nand, page1 + badpos, 1, &retlen, &oob_data)
+		    || oob_data != 0xff)
+			return 1;
 	}
+
 	return 0;
 }
 
-U_BOOT_CMD(nboot, 4, 1, do_nandboot,
-	"nboot   - boot from NAND device\n", "loadAddr dev\n");
+/* print bad blocks in NAND flash */
+static void nand_print_bad(struct nand_chip* nand)
+{
+	unsigned long pos;
+
+	for (pos = 0; pos < nand->totlen; pos += nand->erasesize) {
+		if (check_block(nand, pos))
+			printf(" 0x%8.8lx\n", pos);
+	}
+	puts("\n");
+}
+
+/* cmd: 0: NANDRW_WRITE			write, fail on bad block
+ *	1: NANDRW_READ			read, fail on bad block
+ *	2: NANDRW_WRITE | NANDRW_JFFS2	write, skip bad blocks
+ *	3: NANDRW_READ | NANDRW_JFFS2	read, data all 0xff for bad blocks
+ *      7: NANDRW_READ | NANDRW_JFFS2 | NANDRW_JFFS2_SKIP read, skip bad blocks
+ */
+int nand_rw (struct nand_chip* nand, int cmd,
+	    size_t start, size_t len,
+	    size_t * retlen, u_char * buf)
+{
+	int ret = 0, n, total = 0;
+	char eccbuf[6];
+	/* eblk (once set) is the start of the erase block containing the
+	 * data being processed.
+	 */
+	unsigned long eblk = ~0;	/* force mismatch on first pass */
+	unsigned long erasesize = nand->erasesize;
+
+	while (len) {
+		if ((start & (-erasesize)) != eblk) {
+			/* have crossed into new erase block, deal with
+			 * it if it is sure marked bad.
+			 */
+			eblk = start & (-erasesize); /* start of block */
+			if (check_block(nand, eblk)) {
+				if (cmd == (NANDRW_READ | NANDRW_JFFS2)) {
+					while (len > 0 &&
+					       start - eblk < erasesize) {
+						*(buf++) = 0xff;
+						++start;
+						++total;
+						--len;
+					}
+					continue;
+				} else if (cmd == (NANDRW_READ | NANDRW_JFFS2 | NANDRW_JFFS2_SKIP)) {
+					start += erasesize;
+					continue;
+				} else if (cmd == (NANDRW_WRITE | NANDRW_JFFS2)) {
+					/* skip bad block */
+					start += erasesize;
+					continue;
+				} else {
+					ret = 1;
+					break;
+				}
+			}
+		}
+		/* The ECC will not be calculated correctly if
+		   less than 512 is written or read */
+		/* Is request at least 512 bytes AND it starts on a proper boundry */
+		if((start != ROUND_DOWN(start, 0x200)) || (len < 0x200))
+			printf("Warning block writes should be at least 512 bytes and start on a 512 byte boundry\n");
+
+		if (cmd & NANDRW_READ) {
+			ret = nand_read_ecc(nand, start,
+					   min(len, eblk + erasesize - start),
+					   &n, (u_char*)buf, eccbuf);
+		} else {
+			ret = nand_write_ecc(nand, start,
+					    min(len, eblk + erasesize - start),
+					    &n, (u_char*)buf, eccbuf);
+		}
+
+		if (ret)
+			break;
+
+		start  += n;
+		buf   += n;
+		total += n;
+		len   -= n;
+	}
+	if (retlen)
+		*retlen = total;
+
+	return ret;
+}
+
+static void nand_print(struct nand_chip *nand)
+{
+	if (nand->numchips > 1) {
+		printf("%s at 0x%lx,\n"
+		       "\t  %d chips %s, size %d MB, \n"
+		       "\t  total size %ld MB, sector size %ld kB\n",
+		       nand->name, nand->IO_ADDR, nand->numchips,
+		       nand->chips_name, 1 << (nand->chipshift - 20),
+		       nand->totlen >> 20, nand->erasesize >> 10);
+	}
+	else {
+		printf("%s at 0x%lx (", nand->chips_name, nand->IO_ADDR);
+		print_size(nand->totlen, ", ");
+		print_size(nand->erasesize, " sector)\n");
+	}
+}
+
+/* ------------------------------------------------------------------------- */
+
+static int NanD_WaitReady(struct nand_chip *nand, int ale_wait)
+{
+	/* This is inline, to optimise the common case, where it's ready instantly */
+	int ret = 0;
+
+#ifdef NAND_NO_RB	/* in config file, shorter delays currently wrap accesses */
+	if(ale_wait)
+		NAND_WAIT_READY(nand);	/* do the worst case 25us wait */
+	else
+		udelay(10);
+#else	/* has functional r/b signal */
+	NAND_WAIT_READY(nand);
+#endif
+	return ret;
+}
+
+/* NanD_Command: Send a flash command to the flash chip */
+
+static inline int NanD_Command(struct nand_chip *nand, unsigned char command)
+{
+	unsigned long nandptr = nand->IO_ADDR;
+
+	/* Assert the CLE (Command Latch Enable) line to the flash chip */
+	NAND_CTL_SETCLE(nandptr);
+
+	/* Send the command */
+	WRITE_NAND_COMMAND(command, nandptr);
+
+	/* Lower the CLE line */
+	NAND_CTL_CLRCLE(nandptr);
+
+#ifdef NAND_NO_RB
+	if(command == NAND_CMD_RESET){
+		u_char ret_val;
+		NanD_Command(nand, NAND_CMD_STATUS);
+		do {
+			ret_val = READ_NAND(nandptr);/* wait till ready */
+		} while((ret_val & 0x40) != 0x40);
+	}
+#endif
+	return NanD_WaitReady(nand, 0);
+}
+
+/* NanD_Address: Set the current address for the flash chip */
+
+static int NanD_Address(struct nand_chip *nand, int numbytes, unsigned long ofs)
+{
+	unsigned long nandptr;
+	int i;
+
+	nandptr = nand->IO_ADDR;
+
+	/* Assert the ALE (Address Latch Enable) line to the flash chip */
+	NAND_CTL_SETALE(nandptr);
+
+	/* Send the address */
+	/* Devices with 256-byte page are addressed as:
+	 * Column (bits 0-7), Page (bits 8-15, 16-23, 24-31)
+	 * there is no device on the market with page256
+	 * and more than 24 bits.
+	 * Devices with 512-byte page are addressed as:
+	 * Column (bits 0-7), Page (bits 9-16, 17-24, 25-31)
+	 * 25-31 is sent only if the chip support it.
+	 * bit 8 changes the read command to be sent
+	 * (NAND_CMD_READ0 or NAND_CMD_READ1).
+	 */
+
+	if (numbytes == ADDR_COLUMN || numbytes == ADDR_COLUMN_PAGE)
+		WRITE_NAND_ADDRESS(ofs, nandptr);
+
+	ofs = ofs >> nand->page_shift;
+
+	if (numbytes == ADDR_PAGE || numbytes == ADDR_COLUMN_PAGE) {
+		for (i = 0; i < nand->pageadrlen; i++, ofs = ofs >> 8) {
+			WRITE_NAND_ADDRESS(ofs, nandptr);
+		}
+	}
+
+	/* Lower the ALE line */
+	NAND_CTL_CLRALE(nandptr);
+
+	/* Wait for the chip to respond */
+	return NanD_WaitReady(nand, 1);
+}
+
+/* NanD_SelectChip: Select a given flash chip within the current floor */
+
+static inline int NanD_SelectChip(struct nand_chip *nand, int chip)
+{
+	/* Wait for it to be ready */
+	return NanD_WaitReady(nand, 0);
+}
+
+/* NanD_IdentChip: Identify a given NAND chip given {floor,chip} */
+
+static int NanD_IdentChip(struct nand_chip *nand, int floor, int chip)
+{
+	int mfr, id, i;
+
+	NAND_ENABLE_CE(nand);  /* set pin low */
+	/* Reset the chip */
+	if (NanD_Command(nand, NAND_CMD_RESET)) {
+#ifdef NAND_DEBUG
+		printf("NanD_Command (reset) for %d,%d returned true\n",
+		       floor, chip);
+#endif
+		NAND_DISABLE_CE(nand);  /* set pin high */
+		return 0;
+	}
+
+	/* Read the NAND chip ID: 1. Send ReadID command */
+	if (NanD_Command(nand, NAND_CMD_READID)) {
+#ifdef NAND_DEBUG
+		printf("NanD_Command (ReadID) for %d,%d returned true\n",
+		       floor, chip);
+#endif
+		NAND_DISABLE_CE(nand);  /* set pin high */
+		return 0;
+	}
+
+	/* Read the NAND chip ID: 2. Send address byte zero */
+	NanD_Address(nand, ADDR_COLUMN, 0);
+
+	/* Read the manufacturer and device id codes from the device */
+
+	mfr = READ_NAND(nand->IO_ADDR);
+
+	id = READ_NAND(nand->IO_ADDR);
+
+	NAND_DISABLE_CE(nand);  /* set pin high */
+
+#ifdef NAND_DEBUG
+	printf("NanD_Command (ReadID) got %x %x\n", mfr, id);
+#endif
+	if (mfr == 0xff || mfr == 0) {
+		/* No response - return failure */
+		return 0;
+	}
+
+	/* Check it's the same as the first chip we identified.
+	 * M-Systems say that any given nand_chip device should only
+	 * contain _one_ type of flash part, although that's not a
+	 * hardware restriction. */
+	if (nand->mfr) {
+		if (nand->mfr == mfr && nand->id == id) {
+			return 1;	/* This is another the same the first */
+		} else {
+			printf("Flash chip at floor %d, chip %d is different:\n",
+			       floor, chip);
+		}
+	}
+
+	/* Print and store the manufacturer and ID codes. */
+	for (i = 0; nand_flash_ids[i].name != NULL; i++) {
+		if (mfr == nand_flash_ids[i].manufacture_id &&
+		    id == nand_flash_ids[i].model_id) {
+#ifdef NAND_DEBUG
+			printf("Flash chip found:\n\t Manufacturer ID: 0x%2.2X, "
+			       "Chip ID: 0x%2.2X (%s)\n", mfr, id,
+			       nand_flash_ids[i].name);
+#endif
+			if (!nand->mfr) {
+				nand->mfr = mfr;
+				nand->id = id;
+				nand->chipshift =
+				    nand_flash_ids[i].chipshift;
+				nand->page256 = nand_flash_ids[i].page256;
+				nand->eccsize = 256;
+				if (nand->page256) {
+					nand->oobblock = 256;
+					nand->oobsize = 8;
+					nand->page_shift = 8;
+				} else {
+					nand->oobblock = 512;
+					nand->oobsize = 16;
+					nand->page_shift = 9;
+				}
+				nand->pageadrlen = nand_flash_ids[i].pageadrlen;
+				nand->erasesize  = nand_flash_ids[i].erasesize;
+				nand->chips_name = nand_flash_ids[i].name;
+				nand->bus16	 = nand_flash_ids[i].bus16;
+ 				return 1;
+			}
+			return 0;
+		}
+	}
+
+
+#ifdef NAND_DEBUG
+	/* We haven't fully identified the chip. Print as much as we know. */
+	printf("Unknown flash chip found: %2.2X %2.2X\n",
+	       id, mfr);
+#endif
+
+	return 0;
+}
+
+/* NanD_ScanChips: Find all NAND chips present in a nand_chip, and identify them */
+
+static void NanD_ScanChips(struct nand_chip *nand)
+{
+	int floor, chip;
+	int numchips[NAND_MAX_FLOORS];
+	int maxchips = NAND_MAX_CHIPS;
+	int ret = 1;
+
+	nand->numchips = 0;
+	nand->mfr = 0;
+	nand->id = 0;
+
+
+	/* For each floor, find the number of valid chips it contains */
+	for (floor = 0; floor < NAND_MAX_FLOORS; floor++) {
+		ret = 1;
+		numchips[floor] = 0;
+		for (chip = 0; chip < maxchips && ret != 0; chip++) {
+
+			ret = NanD_IdentChip(nand, floor, chip);
+			if (ret) {
+				numchips[floor]++;
+				nand->numchips++;
+			}
+		}
+	}
+
+	/* If there are none at all that we recognise, bail */
+	if (!nand->numchips) {
+#ifdef NAND_DEBUG
+		puts ("No NAND flash chips recognised.\n");
+#endif
+		return;
+	}
+
+	/* Allocate an array to hold the information for each chip */
+	nand->chips = malloc(sizeof(struct Nand) * nand->numchips);
+	if (!nand->chips) {
+		puts ("No memory for allocating chip info structures\n");
+		return;
+	}
+
+	ret = 0;
+
+	/* Fill out the chip array with {floor, chipno} for each
+	 * detected chip in the device. */
+	for (floor = 0; floor < NAND_MAX_FLOORS; floor++) {
+		for (chip = 0; chip < numchips[floor]; chip++) {
+			nand->chips[ret].floor = floor;
+			nand->chips[ret].chip = chip;
+			nand->chips[ret].curadr = 0;
+			nand->chips[ret].curmode = 0x50;
+			ret++;
+		}
+	}
+
+	/* Calculate and print the total size of the device */
+	nand->totlen = nand->numchips * (1 << nand->chipshift);
+
+#ifdef NAND_DEBUG
+	printf("%d flash chips found. Total nand_chip size: %ld MB\n",
+	       nand->numchips, nand->totlen >> 20);
+#endif
+}
+
+/* we need to be fast here, 1 us per read translates to 1 second per meg */
+static void NanD_ReadBuf (struct nand_chip *nand, u_char * data_buf, int cntr)
+{
+	unsigned long nandptr = nand->IO_ADDR;
+
+	NanD_Command (nand, NAND_CMD_READ0);
+
+	if (nand->bus16) {
+		u16 val;
+
+		while (cntr >= 16) {
+			val = READ_NAND (nandptr);
+			*data_buf++ = val & 0xff;
+			*data_buf++ = val >> 8;
+			val = READ_NAND (nandptr);
+			*data_buf++ = val & 0xff;
+			*data_buf++ = val >> 8;
+			val = READ_NAND (nandptr);
+			*data_buf++ = val & 0xff;
+			*data_buf++ = val >> 8;
+			val = READ_NAND (nandptr);
+			*data_buf++ = val & 0xff;
+			*data_buf++ = val >> 8;
+			val = READ_NAND (nandptr);
+			*data_buf++ = val & 0xff;
+			*data_buf++ = val >> 8;
+			val = READ_NAND (nandptr);
+			*data_buf++ = val & 0xff;
+			*data_buf++ = val >> 8;
+			val = READ_NAND (nandptr);
+			*data_buf++ = val & 0xff;
+			*data_buf++ = val >> 8;
+			val = READ_NAND (nandptr);
+			*data_buf++ = val & 0xff;
+			*data_buf++ = val >> 8;
+			cntr -= 16;
+		}
+
+		while (cntr > 0) {
+			val = READ_NAND (nandptr);
+			*data_buf++ = val & 0xff;
+			*data_buf++ = val >> 8;
+			cntr -= 2;
+		}
+	} else {
+		while (cntr >= 16) {
+			*data_buf++ = READ_NAND (nandptr);
+			*data_buf++ = READ_NAND (nandptr);
+			*data_buf++ = READ_NAND (nandptr);
+			*data_buf++ = READ_NAND (nandptr);
+			*data_buf++ = READ_NAND (nandptr);
+			*data_buf++ = READ_NAND (nandptr);
+			*data_buf++ = READ_NAND (nandptr);
+			*data_buf++ = READ_NAND (nandptr);
+			*data_buf++ = READ_NAND (nandptr);
+			*data_buf++ = READ_NAND (nandptr);
+			*data_buf++ = READ_NAND (nandptr);
+			*data_buf++ = READ_NAND (nandptr);
+			*data_buf++ = READ_NAND (nandptr);
+			*data_buf++ = READ_NAND (nandptr);
+			*data_buf++ = READ_NAND (nandptr);
+			*data_buf++ = READ_NAND (nandptr);
+			cntr -= 16;
+		}
+
+		while (cntr > 0) {
+			*data_buf++ = READ_NAND (nandptr);
+			cntr--;
+		}
+	}
+}
+
+/*
+ * NAND read with ECC
+ */
+static int nand_read_ecc(struct nand_chip *nand, size_t start, size_t len,
+		 size_t * retlen, u_char *buf, u_char *ecc_code)
+{
+	int col, page;
+	int ecc_status = 0;
+#ifdef CONFIG_MTD_NAND_ECC
+	int j;
+	int ecc_failed = 0;
+	u_char *data_poi;
+	u_char ecc_calc[6];
+#endif
+
+	/* Do not allow reads past end of device */
+	if ((start + len) > nand->totlen) {
+		printf ("%s: Attempt read beyond end of device %x %x %x\n",
+			__FUNCTION__, (uint) start, (uint) len, (uint) nand->totlen);
+		*retlen = 0;
+		return -1;
+	}
+
+	/* First we calculate the starting page */
+	/*page = shr(start, nand->page_shift);*/
+	page = start >> nand->page_shift;
+
+	/* Get raw starting column */
+	col = start & (nand->oobblock - 1);
+
+	/* Initialize return value */
+	*retlen = 0;
+
+	/* Select the NAND device */
+	NAND_ENABLE_CE(nand);  /* set pin low */
+
+	/* Loop until all data read */
+	while (*retlen < len) {
+
+#ifdef CONFIG_MTD_NAND_ECC
+		/* Do we have this page in cache ? */
+		if (nand->cache_page == page)
+			goto readdata;
+		/* Send the read command */
+		NanD_Command(nand, NAND_CMD_READ0);
+		if (nand->bus16) {
+ 			NanD_Address(nand, ADDR_COLUMN_PAGE,
+				     (page << nand->page_shift) + (col >> 1));
+		} else {
+ 			NanD_Address(nand, ADDR_COLUMN_PAGE,
+				     (page << nand->page_shift) + col);
+		}
+
+		/* Read in a page + oob data */
+		NanD_ReadBuf(nand, nand->data_buf, nand->oobblock + nand->oobsize);
+
+		/* copy data into cache, for read out of cache and if ecc fails */
+		if (nand->data_cache) {
+			memcpy (nand->data_cache, nand->data_buf,
+				nand->oobblock + nand->oobsize);
+		}
+
+		/* Pick the ECC bytes out of the oob data */
+		for (j = 0; j < 6; j++) {
+			ecc_code[j] = nand->data_buf[(nand->oobblock + oob_config.ecc_pos[j])];
+		}
+
+		/* Calculate the ECC and verify it */
+		/* If block was not written with ECC, skip ECC */
+		if (oob_config.eccvalid_pos != -1 &&
+		    (nand->data_buf[nand->oobblock + oob_config.eccvalid_pos] & 0x0f) != 0x0f) {
+
+			nand_calculate_ecc (&nand->data_buf[0], &ecc_calc[0]);
+			switch (nand_correct_data (&nand->data_buf[0], &ecc_code[0], &ecc_calc[0])) {
+			case -1:
+				printf ("%s: Failed ECC read, page 0x%08x\n", __FUNCTION__, page);
+				ecc_failed++;
+				break;
+			case 1:
+			case 2:	/* transfer ECC corrected data to cache */
+				if (nand->data_cache)
+					memcpy (nand->data_cache, nand->data_buf, 256);
+				break;
+			}
+		}
+
+		if (oob_config.eccvalid_pos != -1 &&
+		    nand->oobblock == 512 && (nand->data_buf[nand->oobblock + oob_config.eccvalid_pos] & 0xf0) != 0xf0) {
+
+			nand_calculate_ecc (&nand->data_buf[256], &ecc_calc[3]);
+			switch (nand_correct_data (&nand->data_buf[256], &ecc_code[3], &ecc_calc[3])) {
+			case -1:
+				printf ("%s: Failed ECC read, page 0x%08x\n", __FUNCTION__, page);
+				ecc_failed++;
+				break;
+			case 1:
+			case 2:	/* transfer ECC corrected data to cache */
+				if (nand->data_cache)
+					memcpy (&nand->data_cache[256], &nand->data_buf[256], 256);
+				break;
+			}
+		}
+readdata:
+		/* Read the data from ECC data buffer into return buffer */
+		data_poi = (nand->data_cache) ? nand->data_cache : nand->data_buf;
+		data_poi += col;
+		if ((*retlen + (nand->oobblock - col)) >= len) {
+			memcpy (buf + *retlen, data_poi, len - *retlen);
+			*retlen = len;
+		} else {
+			memcpy (buf + *retlen, data_poi,  nand->oobblock - col);
+			*retlen += nand->oobblock - col;
+		}
+		/* Set cache page address, invalidate, if ecc_failed */
+		nand->cache_page = (nand->data_cache && !ecc_failed) ? page : -1;
+
+		ecc_status += ecc_failed;
+		ecc_failed = 0;
+
+#else
+		/* Send the read command */
+		NanD_Command(nand, NAND_CMD_READ0);
+		if (nand->bus16) {
+			NanD_Address(nand, ADDR_COLUMN_PAGE,
+				     (page << nand->page_shift) + (col >> 1));
+		} else {
+			NanD_Address(nand, ADDR_COLUMN_PAGE,
+				     (page << nand->page_shift) + col);
+		}
+
+		/* Read the data directly into the return buffer */
+		if ((*retlen + (nand->oobblock - col)) >= len) {
+			NanD_ReadBuf(nand, buf + *retlen, len - *retlen);
+			*retlen = len;
+			/* We're done */
+			continue;
+		} else {
+			NanD_ReadBuf(nand, buf + *retlen, nand->oobblock - col);
+			*retlen += nand->oobblock - col;
+			}
+#endif
+		/* For subsequent reads align to page boundary. */
+		col = 0;
+		/* Increment page address */
+		page++;
+	}
+
+	/* De-select the NAND device */
+	NAND_DISABLE_CE(nand);  /* set pin high */
+
+	/*
+	 * Return success, if no ECC failures, else -EIO
+	 * fs driver will take care of that, because
+	 * retlen == desired len and result == -EIO
+	 */
+	return ecc_status ? -1 : 0;
+}
+
+/*
+ *	Nand_page_program function is used for write and writev !
+ */
+static int nand_write_page (struct nand_chip *nand,
+			    int page, int col, int last, u_char * ecc_code)
+{
+
+	int i;
+	unsigned long nandptr = nand->IO_ADDR;
+
+#ifdef CONFIG_MTD_NAND_ECC
+#ifdef CONFIG_MTD_NAND_VERIFY_WRITE
+	int ecc_bytes = (nand->oobblock == 512) ? 6 : 3;
+#endif
+#endif
+	/* pad oob area */
+	for (i = nand->oobblock; i < nand->oobblock + nand->oobsize; i++)
+		nand->data_buf[i] = 0xff;
+
+#ifdef CONFIG_MTD_NAND_ECC
+	/* Zero out the ECC array */
+	for (i = 0; i < 6; i++)
+		ecc_code[i] = 0x00;
+
+	/* Read back previous written data, if col > 0 */
+	if (col) {
+		NanD_Command (nand, NAND_CMD_READ0);
+		if (nand->bus16) {
+			NanD_Address (nand, ADDR_COLUMN_PAGE,
+				      (page << nand->page_shift) + (col >> 1));
+		} else {
+			NanD_Address (nand, ADDR_COLUMN_PAGE,
+				      (page << nand->page_shift) + col);
+		}
+
+		if (nand->bus16) {
+			u16 val;
+
+			for (i = 0; i < col; i += 2) {
+				val = READ_NAND (nandptr);
+				nand->data_buf[i] = val & 0xff;
+				nand->data_buf[i + 1] = val >> 8;
+			}
+		} else {
+			for (i = 0; i < col; i++)
+				nand->data_buf[i] = READ_NAND (nandptr);
+		}
+	}
+
+	/* Calculate and write the ECC if we have enough data */
+	if ((col < nand->eccsize) && (last >= nand->eccsize)) {
+		nand_calculate_ecc (&nand->data_buf[0], &(ecc_code[0]));
+		for (i = 0; i < 3; i++) {
+			nand->data_buf[(nand->oobblock +
+					oob_config.ecc_pos[i])] = ecc_code[i];
+		}
+		if (oob_config.eccvalid_pos != -1) {
+			nand->data_buf[nand->oobblock +
+				       oob_config.eccvalid_pos] = 0xf0;
+		}
+	}
+
+	/* Calculate and write the second ECC if we have enough data */
+	if ((nand->oobblock == 512) && (last == nand->oobblock)) {
+		nand_calculate_ecc (&nand->data_buf[256], &(ecc_code[3]));
+		for (i = 3; i < 6; i++) {
+			nand->data_buf[(nand->oobblock +
+					oob_config.ecc_pos[i])] = ecc_code[i];
+		}
+		if (oob_config.eccvalid_pos != -1) {
+			nand->data_buf[nand->oobblock +
+				       oob_config.eccvalid_pos] &= 0x0f;
+		}
+	}
+#endif
+	/* Prepad for partial page programming !!! */
+	for (i = 0; i < col; i++)
+		nand->data_buf[i] = 0xff;
+
+	/* Postpad for partial page programming !!! oob is already padded */
+	for (i = last; i < nand->oobblock; i++)
+		nand->data_buf[i] = 0xff;
+
+	/* Send command to begin auto page programming */
+	NanD_Command (nand, NAND_CMD_READ0);
+	NanD_Command (nand, NAND_CMD_SEQIN);
+	if (nand->bus16) {
+		NanD_Address (nand, ADDR_COLUMN_PAGE,
+			      (page << nand->page_shift) + (col >> 1));
+	} else {
+		NanD_Address (nand, ADDR_COLUMN_PAGE,
+			      (page << nand->page_shift) + col);
+	}
+
+	/* Write out complete page of data */
+	if (nand->bus16) {
+		for (i = 0; i < (nand->oobblock + nand->oobsize); i += 2) {
+			WRITE_NAND (nand->data_buf[i] +
+				    (nand->data_buf[i + 1] << 8),
+				    nand->IO_ADDR);
+		}
+	} else {
+		for (i = 0; i < (nand->oobblock + nand->oobsize); i++)
+			WRITE_NAND (nand->data_buf[i], nand->IO_ADDR);
+	}
+
+	/* Send command to actually program the data */
+	NanD_Command (nand, NAND_CMD_PAGEPROG);
+	NanD_Command (nand, NAND_CMD_STATUS);
+#ifdef NAND_NO_RB
+	{
+		u_char ret_val;
+
+		do {
+			ret_val = READ_NAND (nandptr);	/* wait till ready */
+		} while ((ret_val & 0x40) != 0x40);
+	}
+#endif
+	/* See if device thinks it succeeded */
+	if (READ_NAND (nand->IO_ADDR) & 0x01) {
+		printf ("%s: Failed write, page 0x%08x, ", __FUNCTION__,
+			page);
+		return -1;
+	}
+#ifdef CONFIG_MTD_NAND_VERIFY_WRITE
+	/*
+	 * The NAND device assumes that it is always writing to
+	 * a cleanly erased page. Hence, it performs its internal
+	 * write verification only on bits that transitioned from
+	 * 1 to 0. The device does NOT verify the whole page on a
+	 * byte by byte basis. It is possible that the page was
+	 * not completely erased or the page is becoming unusable
+	 * due to wear. The read with ECC would catch the error
+	 * later when the ECC page check fails, but we would rather
+	 * catch it early in the page write stage. Better to write
+	 * no data than invalid data.
+	 */
+
+	/* Send command to read back the page */
+	if (col < nand->eccsize)
+		NanD_Command (nand, NAND_CMD_READ0);
+	else
+		NanD_Command (nand, NAND_CMD_READ1);
+	if (nand->bus16) {
+		NanD_Address (nand, ADDR_COLUMN_PAGE,
+			      (page << nand->page_shift) + (col >> 1));
+	} else {
+		NanD_Address (nand, ADDR_COLUMN_PAGE,
+			      (page << nand->page_shift) + col);
+	}
+
+	/* Loop through and verify the data */
+	if (nand->bus16) {
+		for (i = col; i < last; i = +2) {
+			if ((nand->data_buf[i] +
+			     (nand->data_buf[i + 1] << 8)) != READ_NAND (nand->IO_ADDR)) {
+				printf ("%s: Failed write verify, page 0x%08x ",
+					__FUNCTION__, page);
+				return -1;
+			}
+		}
+	} else {
+		for (i = col; i < last; i++) {
+			if (nand->data_buf[i] != READ_NAND (nand->IO_ADDR)) {
+				printf ("%s: Failed write verify, page 0x%08x ",
+					__FUNCTION__, page);
+				return -1;
+			}
+		}
+	}
+
+#ifdef CONFIG_MTD_NAND_ECC
+	/*
+	 * We also want to check that the ECC bytes wrote
+	 * correctly for the same reasons stated above.
+	 */
+	NanD_Command (nand, NAND_CMD_READOOB);
+	if (nand->bus16) {
+		NanD_Address (nand, ADDR_COLUMN_PAGE,
+			      (page << nand->page_shift) + (col >> 1));
+	} else {
+		NanD_Address (nand, ADDR_COLUMN_PAGE,
+			      (page << nand->page_shift) + col);
+	}
+	if (nand->bus16) {
+		for (i = 0; i < nand->oobsize; i += 2) {
+			u16 val;
+
+			val = READ_NAND (nand->IO_ADDR);
+			nand->data_buf[i] = val & 0xff;
+			nand->data_buf[i + 1] = val >> 8;
+		}
+	} else {
+		for (i = 0; i < nand->oobsize; i++) {
+			nand->data_buf[i] = READ_NAND (nand->IO_ADDR);
+		}
+	}
+	for (i = 0; i < ecc_bytes; i++) {
+		if ((nand->data_buf[(oob_config.ecc_pos[i])] != ecc_code[i]) && ecc_code[i]) {
+			printf ("%s: Failed ECC write "
+				"verify, page 0x%08x, "
+				"%6i bytes were succesful\n",
+				__FUNCTION__, page, i);
+			return -1;
+		}
+	}
+#endif	/* CONFIG_MTD_NAND_ECC */
+#endif	/* CONFIG_MTD_NAND_VERIFY_WRITE */
+	return 0;
+}
+
+static int nand_write_ecc (struct nand_chip* nand, size_t to, size_t len,
+			   size_t * retlen, const u_char * buf, u_char * ecc_code)
+{
+	int i, page, col, cnt, ret = 0;
+
+	/* Do not allow write past end of device */
+	if ((to + len) > nand->totlen) {
+		printf ("%s: Attempt to write past end of page\n", __FUNCTION__);
+		return -1;
+	}
+
+	/* Shift to get page */
+	page = ((int) to) >> nand->page_shift;
+
+	/* Get the starting column */
+	col = to & (nand->oobblock - 1);
+
+	/* Initialize return length value */
+	*retlen = 0;
+
+	/* Select the NAND device */
+#ifdef CONFIG_OMAP1510
+	archflashwp(0,0);
+#endif
+#ifdef CFG_NAND_WP
+	NAND_WP_OFF();
+#endif
+
+    	NAND_ENABLE_CE(nand);  /* set pin low */
+
+	/* Check the WP bit */
+	NanD_Command(nand, NAND_CMD_STATUS);
+	if (!(READ_NAND(nand->IO_ADDR) & 0x80)) {
+		printf ("%s: Device is write protected!!!\n", __FUNCTION__);
+		ret = -1;
+		goto out;
+	}
+
+	/* Loop until all data is written */
+	while (*retlen < len) {
+		/* Invalidate cache, if we write to this page */
+		if (nand->cache_page == page)
+			nand->cache_page = -1;
+
+		/* Write data into buffer */
+		if ((col + len) >= nand->oobblock) {
+			for (i = col, cnt = 0; i < nand->oobblock; i++, cnt++) {
+				nand->data_buf[i] = buf[(*retlen + cnt)];
+			}
+		} else {
+			for (i = col, cnt = 0; cnt < (len - *retlen); i++, cnt++) {
+				nand->data_buf[i] = buf[(*retlen + cnt)];
+			}
+		}
+		/* We use the same function for write and writev !) */
+		ret = nand_write_page (nand, page, col, i, ecc_code);
+		if (ret)
+			goto out;
+
+		/* Next data start at page boundary */
+		col = 0;
+
+		/* Update written bytes count */
+		*retlen += cnt;
+
+		/* Increment page address */
+		page++;
+	}
+
+	/* Return happy */
+	*retlen = len;
+
+out:
+	/* De-select the NAND device */
+	NAND_DISABLE_CE(nand);  /* set pin high */
+#ifdef CONFIG_OMAP1510
+    	archflashwp(0,1);
+#endif
+#ifdef CFG_NAND_WP
+	NAND_WP_ON();
+#endif
+
+	return ret;
+}
+
+/* read from the 16 bytes of oob data that correspond to a 512 byte
+ * page or 2 256-byte pages.
+ */
+static int nand_read_oob(struct nand_chip* nand, size_t ofs, size_t len,
+			 size_t * retlen, u_char * buf)
+{
+	int len256 = 0;
+	struct Nand *mychip;
+	int ret = 0;
+
+	mychip = &nand->chips[ofs >> nand->chipshift];
+
+	/* update address for 2M x 8bit devices. OOB starts on the second */
+	/* page to maintain compatibility with nand_read_ecc. */
+	if (nand->page256) {
+		if (!(ofs & 0x8))
+			ofs += 0x100;
+		else
+			ofs -= 0x8;
+	}
+
+	NAND_ENABLE_CE(nand);  /* set pin low */
+	NanD_Command(nand, NAND_CMD_READOOB);
+	if (nand->bus16) {
+ 		NanD_Address(nand, ADDR_COLUMN_PAGE,
+			     ((ofs >> nand->page_shift) << nand->page_shift) +
+ 				((ofs & (nand->oobblock - 1)) >> 1));
+	} else {
+		NanD_Address(nand, ADDR_COLUMN_PAGE, ofs);
+	}
+
+	/* treat crossing 8-byte OOB data for 2M x 8bit devices */
+	/* Note: datasheet says it should automaticaly wrap to the */
+	/*       next OOB block, but it didn't work here. mf.      */
+	if (nand->page256 && ofs + len > (ofs | 0x7) + 1) {
+		len256 = (ofs | 0x7) + 1 - ofs;
+		NanD_ReadBuf(nand, buf, len256);
+
+		NanD_Command(nand, NAND_CMD_READOOB);
+		NanD_Address(nand, ADDR_COLUMN_PAGE, ofs & (~0x1ff));
+	}
+
+	NanD_ReadBuf(nand, &buf[len256], len - len256);
+
+	*retlen = len;
+	/* Reading the full OOB data drops us off of the end of the page,
+	 * causing the flash device to go into busy mode, so we need
+	 * to wait until ready 11.4.1 and Toshiba TC58256FT nands */
+
+	ret = NanD_WaitReady(nand, 1);
+	NAND_DISABLE_CE(nand);  /* set pin high */
+
+	return ret;
+
+}
+
+/* write to the 16 bytes of oob data that correspond to a 512 byte
+ * page or 2 256-byte pages.
+ */
+static int nand_write_oob(struct nand_chip* nand, size_t ofs, size_t len,
+		  size_t * retlen, const u_char * buf)
+{
+	int len256 = 0;
+	int i;
+	unsigned long nandptr = nand->IO_ADDR;
+
+#ifdef PSYCHO_DEBUG
+	printf("nand_write_oob(%lx, %d): %2.2X %2.2X %2.2X %2.2X ... %2.2X %2.2X .. %2.2X %2.2X\n",
+	       (long)ofs, len, buf[0], buf[1], buf[2], buf[3],
+	       buf[8], buf[9], buf[14],buf[15]);
+#endif
+
+	NAND_ENABLE_CE(nand);  /* set pin low to enable chip */
+
+	/* Reset the chip */
+	NanD_Command(nand, NAND_CMD_RESET);
+
+	/* issue the Read2 command to set the pointer to the Spare Data Area. */
+	NanD_Command(nand, NAND_CMD_READOOB);
+	if (nand->bus16) {
+ 		NanD_Address(nand, ADDR_COLUMN_PAGE,
+			     ((ofs >> nand->page_shift) << nand->page_shift) +
+ 				((ofs & (nand->oobblock - 1)) >> 1));
+	} else {
+ 		NanD_Address(nand, ADDR_COLUMN_PAGE, ofs);
+	}
+
+	/* update address for 2M x 8bit devices. OOB starts on the second */
+	/* page to maintain compatibility with nand_read_ecc. */
+	if (nand->page256) {
+		if (!(ofs & 0x8))
+			ofs += 0x100;
+		else
+			ofs -= 0x8;
+	}
+
+	/* issue the Serial Data In command to initial the Page Program process */
+	NanD_Command(nand, NAND_CMD_SEQIN);
+	if (nand->bus16) {
+ 		NanD_Address(nand, ADDR_COLUMN_PAGE,
+			     ((ofs >> nand->page_shift) << nand->page_shift) +
+ 				((ofs & (nand->oobblock - 1)) >> 1));
+	} else {
+ 		NanD_Address(nand, ADDR_COLUMN_PAGE, ofs);
+	}
+
+	/* treat crossing 8-byte OOB data for 2M x 8bit devices */
+	/* Note: datasheet says it should automaticaly wrap to the */
+	/*       next OOB block, but it didn't work here. mf.      */
+	if (nand->page256 && ofs + len > (ofs | 0x7) + 1) {
+		len256 = (ofs | 0x7) + 1 - ofs;
+		for (i = 0; i < len256; i++)
+			WRITE_NAND(buf[i], nandptr);
+
+		NanD_Command(nand, NAND_CMD_PAGEPROG);
+		NanD_Command(nand, NAND_CMD_STATUS);
+#ifdef NAND_NO_RB
+   		{ u_char ret_val;
+			do {
+				ret_val = READ_NAND(nandptr); /* wait till ready */
+			} while ((ret_val & 0x40) != 0x40);
+		}
+#endif
+		if (READ_NAND(nandptr) & 1) {
+			puts ("Error programming oob data\n");
+			/* There was an error */
+			NAND_DISABLE_CE(nand);  /* set pin high */
+			*retlen = 0;
+			return -1;
+		}
+		NanD_Command(nand, NAND_CMD_SEQIN);
+		NanD_Address(nand, ADDR_COLUMN_PAGE, ofs & (~0x1ff));
+	}
+
+	if (nand->bus16) {
+		for (i = len256; i < len; i += 2) {
+			WRITE_NAND(buf[i] + (buf[i+1] << 8), nandptr);
+		}
+	} else {
+		for (i = len256; i < len; i++)
+			WRITE_NAND(buf[i], nandptr);
+	}
+
+	NanD_Command(nand, NAND_CMD_PAGEPROG);
+	NanD_Command(nand, NAND_CMD_STATUS);
+#ifdef NAND_NO_RB
+	{	u_char ret_val;
+		do {
+			ret_val = READ_NAND(nandptr); /* wait till ready */
+		} while ((ret_val & 0x40) != 0x40);
+	}
+#endif
+	if (READ_NAND(nandptr) & 1) {
+		puts ("Error programming oob data\n");
+		/* There was an error */
+		NAND_DISABLE_CE(nand);  /* set pin high */
+		*retlen = 0;
+		return -1;
+	}
+
+	NAND_DISABLE_CE(nand);  /* set pin high */
+	*retlen = len;
+	return 0;
+
+}
+
+int nand_erase(struct nand_chip* nand, size_t ofs, size_t len, int clean)
+{
+	/* This is defined as a structure so it will work on any system
+	 * using native endian jffs2 (the default).
+	 */
+	static struct jffs2_unknown_node clean_marker = {
+		JFFS2_MAGIC_BITMASK,
+		JFFS2_NODETYPE_CLEANMARKER,
+		8		/* 8 bytes in this node */
+	};
+	unsigned long nandptr;
+	struct Nand *mychip;
+	int ret = 0;
+
+	if (ofs & (nand->erasesize-1) || len & (nand->erasesize-1)) {
+		printf ("Offset and size must be sector aligned, erasesize = %d\n",
+			(int) nand->erasesize);
+		return -1;
+	}
+
+	nandptr = nand->IO_ADDR;
+
+	/* Select the NAND device */
+#ifdef CONFIG_OMAP1510
+	archflashwp(0,0);
+#endif
+#ifdef CFG_NAND_WP
+	NAND_WP_OFF();
+#endif
+    NAND_ENABLE_CE(nand);  /* set pin low */
+
+	/* Check the WP bit */
+	NanD_Command(nand, NAND_CMD_STATUS);
+	if (!(READ_NAND(nand->IO_ADDR) & 0x80)) {
+		printf ("nand_write_ecc: Device is write protected!!!\n");
+		ret = -1;
+		goto out;
+	}
+
+	/* Check the WP bit */
+	NanD_Command(nand, NAND_CMD_STATUS);
+	if (!(READ_NAND(nand->IO_ADDR) & 0x80)) {
+		printf ("%s: Device is write protected!!!\n", __FUNCTION__);
+		ret = -1;
+		goto out;
+	}
+
+	/* FIXME: Do nand in the background. Use timers or schedule_task() */
+	while(len) {
+		/*mychip = &nand->chips[shr(ofs, nand->chipshift)];*/
+		mychip = &nand->chips[ofs >> nand->chipshift];
+
+		/* always check for bad block first, genuine bad blocks
+		 * should _never_  be erased.
+		 */
+		if (ALLOW_ERASE_BAD_DEBUG || !check_block(nand, ofs)) {
+			/* Select the NAND device */
+			NAND_ENABLE_CE(nand);  /* set pin low */
+
+			NanD_Command(nand, NAND_CMD_ERASE1);
+			NanD_Address(nand, ADDR_PAGE, ofs);
+			NanD_Command(nand, NAND_CMD_ERASE2);
+
+			NanD_Command(nand, NAND_CMD_STATUS);
+
+#ifdef NAND_NO_RB
+			{	u_char ret_val;
+				do {
+					ret_val = READ_NAND(nandptr); /* wait till ready */
+				} while ((ret_val & 0x40) != 0x40);
+			}
+#endif
+			if (READ_NAND(nandptr) & 1) {
+				printf ("%s: Error erasing at 0x%lx\n",
+					__FUNCTION__, (long)ofs);
+				/* There was an error */
+				ret = -1;
+				goto out;
+			}
+			if (clean) {
+				int n;	/* return value not used */
+				int p, l;
+
+				/* clean marker position and size depend
+				 * on the page size, since 256 byte pages
+				 * only have 8 bytes of oob data
+				 */
+				if (nand->page256) {
+					p = NAND_JFFS2_OOB8_FSDAPOS;
+					l = NAND_JFFS2_OOB8_FSDALEN;
+				} else {
+					p = NAND_JFFS2_OOB16_FSDAPOS;
+					l = NAND_JFFS2_OOB16_FSDALEN;
+				}
+
+				ret = nand_write_oob(nand, ofs + p, l, &n,
+						     (u_char *)&clean_marker);
+				/* quit here if write failed */
+				if (ret)
+					goto out;
+			}
+		}
+		ofs += nand->erasesize;
+		len -= nand->erasesize;
+	}
+
+out:
+	/* De-select the NAND device */
+	NAND_DISABLE_CE(nand);  /* set pin high */
+#ifdef CONFIG_OMAP1510
+    	archflashwp(0,1);
+#endif
+#ifdef CFG_NAND_WP
+	NAND_WP_ON();
+#endif
+
+	return ret;
+}
+
+static inline int nandcheck(unsigned long potential, unsigned long physadr)
+{
+	return 0;
+}
+
+unsigned long nand_probe(unsigned long physadr)
+{
+	struct nand_chip *nand = NULL;
+	int i = 0, ChipID = 1;
+
+#ifdef CONFIG_MTD_NAND_ECC_JFFS2
+	oob_config.ecc_pos[0] = NAND_JFFS2_OOB_ECCPOS0;
+	oob_config.ecc_pos[1] = NAND_JFFS2_OOB_ECCPOS1;
+	oob_config.ecc_pos[2] = NAND_JFFS2_OOB_ECCPOS2;
+	oob_config.ecc_pos[3] = NAND_JFFS2_OOB_ECCPOS3;
+	oob_config.ecc_pos[4] = NAND_JFFS2_OOB_ECCPOS4;
+	oob_config.ecc_pos[5] = NAND_JFFS2_OOB_ECCPOS5;
+	oob_config.eccvalid_pos = 4;
+#else
+	oob_config.ecc_pos[0] = NAND_NOOB_ECCPOS0;
+	oob_config.ecc_pos[1] = NAND_NOOB_ECCPOS1;
+	oob_config.ecc_pos[2] = NAND_NOOB_ECCPOS2;
+	oob_config.ecc_pos[3] = NAND_NOOB_ECCPOS3;
+	oob_config.ecc_pos[4] = NAND_NOOB_ECCPOS4;
+	oob_config.ecc_pos[5] = NAND_NOOB_ECCPOS5;
+	oob_config.eccvalid_pos = NAND_NOOB_ECCVPOS;
+#endif
+	oob_config.badblock_pos = 5;
+
+	for (i=0; i<CFG_MAX_NAND_DEVICE; i++) {
+		if (nand_dev_desc[i].ChipID == NAND_ChipID_UNKNOWN) {
+			nand = &nand_dev_desc[i];
+			break;
+		}
+	}
+	if (!nand)
+		return (0);
+
+	memset((char *)nand, 0, sizeof(struct nand_chip));
+
+	nand->IO_ADDR = physadr;
+	nand->cache_page = -1;  /* init the cache page */
+	NanD_ScanChips(nand);
+
+	if (nand->totlen == 0) {
+		/* no chips found, clean up and quit */
+		memset((char *)nand, 0, sizeof(struct nand_chip));
+		nand->ChipID = NAND_ChipID_UNKNOWN;
+		return (0);
+	}
+
+	nand->ChipID = ChipID;
+	if (curr_device == -1)
+		curr_device = i;
+
+	nand->data_buf = malloc (nand->oobblock + nand->oobsize);
+	if (!nand->data_buf) {
+		puts ("Cannot allocate memory for data structures.\n");
+		return (0);
+	}
+
+	return (nand->totlen);
+}
+
+#ifdef CONFIG_MTD_NAND_ECC
+/*
+ * Pre-calculated 256-way 1 byte column parity
+ */
+static const u_char nand_ecc_precalc_table[] = {
+	0x00, 0x55, 0x56, 0x03, 0x59, 0x0c, 0x0f, 0x5a,
+	0x5a, 0x0f, 0x0c, 0x59, 0x03, 0x56, 0x55, 0x00,
+	0x65, 0x30, 0x33, 0x66, 0x3c, 0x69, 0x6a, 0x3f,
+	0x3f, 0x6a, 0x69, 0x3c, 0x66, 0x33, 0x30, 0x65,
+	0x66, 0x33, 0x30, 0x65, 0x3f, 0x6a, 0x69, 0x3c,
+	0x3c, 0x69, 0x6a, 0x3f, 0x65, 0x30, 0x33, 0x66,
+	0x03, 0x56, 0x55, 0x00, 0x5a, 0x0f, 0x0c, 0x59,
+	0x59, 0x0c, 0x0f, 0x5a, 0x00, 0x55, 0x56, 0x03,
+	0x69, 0x3c, 0x3f, 0x6a, 0x30, 0x65, 0x66, 0x33,
+	0x33, 0x66, 0x65, 0x30, 0x6a, 0x3f, 0x3c, 0x69,
+	0x0c, 0x59, 0x5a, 0x0f, 0x55, 0x00, 0x03, 0x56,
+	0x56, 0x03, 0x00, 0x55, 0x0f, 0x5a, 0x59, 0x0c,
+	0x0f, 0x5a, 0x59, 0x0c, 0x56, 0x03, 0x00, 0x55,
+	0x55, 0x00, 0x03, 0x56, 0x0c, 0x59, 0x5a, 0x0f,
+	0x6a, 0x3f, 0x3c, 0x69, 0x33, 0x66, 0x65, 0x30,
+	0x30, 0x65, 0x66, 0x33, 0x69, 0x3c, 0x3f, 0x6a,
+	0x6a, 0x3f, 0x3c, 0x69, 0x33, 0x66, 0x65, 0x30,
+	0x30, 0x65, 0x66, 0x33, 0x69, 0x3c, 0x3f, 0x6a,
+	0x0f, 0x5a, 0x59, 0x0c, 0x56, 0x03, 0x00, 0x55,
+	0x55, 0x00, 0x03, 0x56, 0x0c, 0x59, 0x5a, 0x0f,
+	0x0c, 0x59, 0x5a, 0x0f, 0x55, 0x00, 0x03, 0x56,
+	0x56, 0x03, 0x00, 0x55, 0x0f, 0x5a, 0x59, 0x0c,
+	0x69, 0x3c, 0x3f, 0x6a, 0x30, 0x65, 0x66, 0x33,
+	0x33, 0x66, 0x65, 0x30, 0x6a, 0x3f, 0x3c, 0x69,
+	0x03, 0x56, 0x55, 0x00, 0x5a, 0x0f, 0x0c, 0x59,
+	0x59, 0x0c, 0x0f, 0x5a, 0x00, 0x55, 0x56, 0x03,
+	0x66, 0x33, 0x30, 0x65, 0x3f, 0x6a, 0x69, 0x3c,
+	0x3c, 0x69, 0x6a, 0x3f, 0x65, 0x30, 0x33, 0x66,
+	0x65, 0x30, 0x33, 0x66, 0x3c, 0x69, 0x6a, 0x3f,
+	0x3f, 0x6a, 0x69, 0x3c, 0x66, 0x33, 0x30, 0x65,
+	0x00, 0x55, 0x56, 0x03, 0x59, 0x0c, 0x0f, 0x5a,
+	0x5a, 0x0f, 0x0c, 0x59, 0x03, 0x56, 0x55, 0x00
+};
+
+
+/*
+ * Creates non-inverted ECC code from line parity
+ */
+static void nand_trans_result(u_char reg2, u_char reg3,
+	u_char *ecc_code)
+{
+	u_char a, b, i, tmp1, tmp2;
+
+	/* Initialize variables */
+	a = b = 0x80;
+	tmp1 = tmp2 = 0;
+
+	/* Calculate first ECC byte */
+	for (i = 0; i < 4; i++) {
+		if (reg3 & a)		/* LP15,13,11,9 --> ecc_code[0] */
+			tmp1 |= b;
+		b >>= 1;
+		if (reg2 & a)		/* LP14,12,10,8 --> ecc_code[0] */
+			tmp1 |= b;
+		b >>= 1;
+		a >>= 1;
+	}
+
+	/* Calculate second ECC byte */
+	b = 0x80;
+	for (i = 0; i < 4; i++) {
+		if (reg3 & a)		/* LP7,5,3,1 --> ecc_code[1] */
+			tmp2 |= b;
+		b >>= 1;
+		if (reg2 & a)		/* LP6,4,2,0 --> ecc_code[1] */
+			tmp2 |= b;
+		b >>= 1;
+		a >>= 1;
+	}
+
+	/* Store two of the ECC bytes */
+	ecc_code[0] = tmp1;
+	ecc_code[1] = tmp2;
+}
+
+/*
+ * Calculate 3 byte ECC code for 256 byte block
+ */
+static void nand_calculate_ecc (const u_char *dat, u_char *ecc_code)
+{
+	u_char idx, reg1, reg3;
+	int j;
+
+	/* Initialize variables */
+	reg1 = reg3 = 0;
+	ecc_code[0] = ecc_code[1] = ecc_code[2] = 0;
+
+	/* Build up column parity */
+	for(j = 0; j < 256; j++) {
+
+		/* Get CP0 - CP5 from table */
+		idx = nand_ecc_precalc_table[dat[j]];
+		reg1 ^= idx;
+
+		/* All bit XOR = 1 ? */
+		if (idx & 0x40) {
+			reg3 ^= (u_char) j;
+		}
+	}
+
+	/* Create non-inverted ECC code from line parity */
+	nand_trans_result((reg1 & 0x40) ? ~reg3 : reg3, reg3, ecc_code);
+
+	/* Calculate final ECC code */
+	ecc_code[0] = ~ecc_code[0];
+	ecc_code[1] = ~ecc_code[1];
+	ecc_code[2] = ((~reg1) << 2) | 0x03;
+}
+
+/*
+ * Detect and correct a 1 bit error for 256 byte block
+ */
+static int nand_correct_data (u_char *dat, u_char *read_ecc, u_char *calc_ecc)
+{
+	u_char a, b, c, d1, d2, d3, add, bit, i;
+
+	/* Do error detection */
+	d1 = calc_ecc[0] ^ read_ecc[0];
+	d2 = calc_ecc[1] ^ read_ecc[1];
+	d3 = calc_ecc[2] ^ read_ecc[2];
+
+	if ((d1 | d2 | d3) == 0) {
+		/* No errors */
+		return 0;
+	} else {
+		a = (d1 ^ (d1 >> 1)) & 0x55;
+		b = (d2 ^ (d2 >> 1)) & 0x55;
+		c = (d3 ^ (d3 >> 1)) & 0x54;
+
+		/* Found and will correct single bit error in the data */
+		if ((a == 0x55) && (b == 0x55) && (c == 0x54)) {
+			c = 0x80;
+			add = 0;
+			a = 0x80;
+			for (i=0; i<4; i++) {
+				if (d1 & c)
+					add |= a;
+				c >>= 2;
+				a >>= 1;
+			}
+			c = 0x80;
+			for (i=0; i<4; i++) {
+				if (d2 & c)
+					add |= a;
+				c >>= 2;
+				a >>= 1;
+			}
+			bit = 0;
+			b = 0x04;
+			c = 0x80;
+			for (i=0; i<3; i++) {
+				if (d3 & c)
+					bit |= b;
+				c >>= 2;
+				b >>= 1;
+			}
+			b = 0x01;
+			a = dat[add];
+			a ^= (b << bit);
+			dat[add] = a;
+			return 1;
+		}
+		else {
+			i = 0;
+			while (d1) {
+				if (d1 & 0x01)
+					++i;
+				d1 >>= 1;
+			}
+			while (d2) {
+				if (d2 & 0x01)
+					++i;
+				d2 >>= 1;
+			}
+			while (d3) {
+				if (d3 & 0x01)
+					++i;
+				d3 >>= 1;
+			}
+			if (i == 1) {
+				/* ECC Code Error Correction */
+				read_ecc[0] = calc_ecc[0];
+				read_ecc[1] = calc_ecc[1];
+				read_ecc[2] = calc_ecc[2];
+				return 2;
+			}
+			else {
+				/* Uncorrectable Error */
+				return -1;
+			}
+		}
+	}
+
+	/* Should never happen */
+	return -1;
+}
+
+#endif
+
+#ifdef CONFIG_JFFS2_NAND
+
+int read_jffs2_nand(size_t start, size_t len,
+		    size_t * retlen, u_char * buf, int nanddev)
+{
+	return nand_rw(nand_dev_desc + nanddev, NANDRW_READ | NANDRW_JFFS2,
+		       start, len, retlen, buf);
+}
 
+#endif /* CONFIG_JFFS2_NAND */
 
-#endif				/* (CONFIG_COMMANDS & CFG_CMD_NAND) */
 
+#endif /* (CONFIG_COMMANDS & CFG_CMD_NAND) */
diff --git a/common/cmd_nand_new.c b/common/cmd_nand_new.c
new file mode 100644
index 0000000..3ff2eba
--- /dev/null
+++ b/common/cmd_nand_new.c
@@ -0,0 +1,364 @@
+#include <common.h>
+
+#if (CONFIG_COMMANDS & CFG_CMD_NAND) && defined CONFIG_NEW_NAND_CODE
+
+#include <command.h>
+#include <watchdog.h>
+#include <malloc.h>
+#include <asm/byteorder.h>
+
+#ifdef CONFIG_SHOW_BOOT_PROGRESS
+# include <status_led.h>
+# define SHOW_BOOT_PROGRESS(arg)	show_boot_progress(arg)
+#else
+# define SHOW_BOOT_PROGRESS(arg)
+#endif
+
+#include <jffs2/jffs2.h>
+#include <nand.h>
+
+extern nand_info_t nand_info[];       /* info for NAND chips */
+
+static int nand_dump_oob(nand_info_t *nand, ulong off)
+{
+	return 0;
+}
+
+static int nand_dump(nand_info_t *nand, ulong off)
+{
+	int i;
+	u_char *buf, *p;
+
+	buf = malloc(nand->oobblock + nand->oobsize);
+	if (!buf) {
+		puts("No memory for page buffer\n");
+		return 1;
+	}
+	off &= ~(nand->oobblock - 1);
+	i = nand_read_raw(nand, buf, off, nand->oobblock, nand->oobsize);
+	if (i < 0) {
+		printf("Error (%d) reading page %08x\n", i, off);
+		free(buf);
+		return 1;
+	}
+	printf("Page %08x dump:\n", off);
+	i = nand->oobblock >> 4; p = buf;
+	while (i--) {
+		printf( "\t%02x %02x %02x %02x %02x %02x %02x %02x"
+			"  %02x %02x %02x %02x %02x %02x %02x %02x\n",
+			p[0], p[1], p[2], p[3], p[4], p[5], p[6], p[7],
+			p[8], p[9], p[10], p[11], p[12], p[13], p[14], p[15]);
+		p += 16;
+	}
+	puts("OOB:\n");
+	i = nand->oobsize >> 3;
+	while (i--) {
+		printf( "\t%02x %02x %02x %02x %02x %02x %02x %02x\n",
+			p[0], p[1], p[2], p[3], p[4], p[5], p[6], p[7]);
+		p += 8;
+	}
+	free(buf);
+
+	return 0;
+}
+
+/* ------------------------------------------------------------------------- */
+
+static void
+arg_off_size(int argc, char *argv[], ulong *off, ulong *size, ulong totsize)
+{
+	*off = 0;
+	*size = 0;
+
+#if defined(CONFIG_JFFS2_NAND) && defined(CFG_JFFS_CUSTOM_PART)
+	if (argc >= 1 && strcmp(argv[0], "partition") == 0) {
+		int part_num;
+		struct part_info *part;
+		const char *partstr;
+
+		if (argc >= 2)
+			partstr = argv[1];
+		else
+			partstr = getenv("partition");
+
+		if (partstr)
+			part_num = (int)simple_strtoul(partstr, NULL, 10);
+		else
+			part_num = 0;
+
+		part = jffs2_part_info(part_num);
+		if (part == NULL) {
+			printf("\nInvalid partition %d\n", part_num);
+			return;
+		}
+		*size = part->size;
+		*off = (ulong)part->offset;
+	} else
+#endif
+	{
+		if (argc >= 1)
+			*off = (ulong)simple_strtoul(argv[0], NULL, 16);
+		else
+			*off = 0;
+
+		if (argc >= 2)
+			*size = (ulong)simple_strtoul(argv[1], NULL, 16);
+		else
+			*size = totsize - *off;
+
+	}
+
+}
+
+int do_nand(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
+{
+	int i, dev, ret;
+	ulong addr, off, size;
+	char *cmd, *s;
+	nand_info_t *nand;
+
+	/* at least two arguments please */
+	if (argc < 2)
+		goto usage;
+
+	cmd = argv[1];
+
+	if (strcmp(cmd, "info") == 0) {
+
+		putc('\n');
+		for (i = 0; i < CFG_MAX_NAND_DEVICE; i++) {
+			if (nand_info[i].name)
+				printf("Device %d: %s\n", i, nand_info[i].name);
+		}
+		return 0;
+	}
+
+	if (strcmp(cmd, "device") == 0) {
+
+		if (argc < 3) {
+			if ((nand_curr_device < 0) ||
+			    (nand_curr_device >= CFG_MAX_NAND_DEVICE))
+				puts("\nno devices available\n");
+			else
+				printf("\nDevice %d: %s\n", nand_curr_device,
+					nand_info[nand_curr_device].name);
+			return 0;
+		}
+		dev = (int)simple_strtoul(argv[2], NULL, 10);
+		if (dev < 0 || dev >= CFG_MAX_NAND_DEVICE || !nand_info[dev].name) {
+			puts("No such device\n");
+			return 1;
+		}
+		printf("Device %d: %s", dev, nand_info[dev].name);
+		puts("... is now current device\n");
+		nand_curr_device = dev;
+		return 0;
+	}
+
+	if (strcmp(cmd, "bad") != 0 && strcmp(cmd, "erase") != 0 &&
+	    strncmp(cmd, "dump", 4) != 0 &&
+	    strncmp(cmd, "read", 4) != 0 && strncmp(cmd, "write", 5) != 0)
+		goto usage;
+
+	/* the following commands operate on the current device */
+	if (nand_curr_device < 0 || nand_curr_device >= CFG_MAX_NAND_DEVICE ||
+	    !nand_info[nand_curr_device].name) {
+		puts("\nno devices available\n");
+		return 1;
+	}
+	nand = &nand_info[nand_curr_device];
+
+	if (strcmp(cmd, "bad") == 0) {
+		printf("\nDevice %d bad blocks:\n", nand_curr_device);
+		for (off = 0; off < nand->size; off += nand->erasesize)
+			if (nand_block_isbad(nand, off))
+				printf("  %08x\n", off);
+		return 0;
+	}
+
+	if (strcmp(cmd, "erase") == 0) {
+		arg_off_size(argc - 2, argv + 2, &off, &size, nand->size);
+		if (off == 0 && size == 0)
+			return 1;
+
+		printf("\nNAND erase: device %d offset 0x%x, size 0x%x ",
+		       nand_curr_device, off, size);
+		ret = nand_erase(nand, off, size);
+		printf("%s\n", ret ? "ERROR" : "OK");
+
+		return ret == 0 ? 0 : 1;
+	}
+
+	if (strncmp(cmd, "dump", 4) == 0) {
+		if (argc < 3)
+			goto usage;
+
+		s = strchr(cmd, '.');
+		off = (int)simple_strtoul(argv[2], NULL, 16);
+
+		if (s != NULL && strcmp(s, ".oob") == 0)
+			ret = nand_dump_oob(nand, off);
+		else
+			ret = nand_dump(nand, off);
+
+		return ret == 0 ? 1 : 0;
+
+	}
+
+	/* read write */
+	if (strncmp(cmd, "read", 4) == 0 || strncmp(cmd, "write", 5) == 0) {
+		if (argc < 4)
+			goto usage;
+/*
+		s = strchr(cmd, '.');
+		clean = CLEAN_NONE;
+		if (s != NULL) {
+			if (strcmp(s, ".jffs2") == 0 || strcmp(s, ".e") == 0
+			    || strcmp(s, ".i"))
+				clean = CLEAN_JFFS2;
+		}
+*/
+		addr = (ulong)simple_strtoul(argv[2], NULL, 16);
+
+		arg_off_size(argc - 3, argv + 3, &off, &size, nand->size);
+		if (off == 0 && size == 0)
+			return 1;
+
+		i = strncmp(cmd, "read", 4) == 0;	/* 1 = read, 0 = write */
+		printf("\nNAND %s: device %d offset %u, size %u ... ",
+		       i ? "read" : "write", nand_curr_device, off, size);
+
+		if (i)
+			ret = nand_read(nand, off, &size, (u_char *)addr);
+		else
+			ret = nand_write(nand, off, &size, (u_char *)addr);
+
+		printf(" %d bytes %s: %s\n", size,
+		       i ? "read" : "written", ret ? "ERROR" : "OK");
+
+		return ret == 0 ? 0 : 1;
+	}
+usage:
+	printf("Usage:\n%s\n", cmdtp->usage);
+	return 1;
+}
+
+U_BOOT_CMD(nand, 5, 1, do_nand,
+	"nand    - NAND sub-system\n",
+	"info                  - show available NAND devices\n"
+	"nand device [dev]     - show or set current device\n"
+	"nand read[.jffs2]     - addr off size\n"
+	"nand write[.jffs2]    - addr off size - read/write `size' bytes starting\n"
+	"    at offset `off' to/from memory address `addr'\n"
+	"nand erase [clean] [off size] - erase `size' bytes from\n"
+	"    offset `off' (entire device if not specified)\n"
+	"nand bad - show bad blocks\n"
+	"nand dump[.oob] off - dump page\n"
+	"nand scrub - really clean NAND erasing bad blocks (UNSAFE)\n"
+	"nand markbad off - mark bad block at offset (UNSAFE)\n"
+	"nand biterr off - make a bit error at offset (UNSAFE)\n");
+
+int do_nandboot(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
+{
+	char *boot_device = NULL;
+	char *ep;
+	int dev;
+	int r;
+	ulong addr, cnt, offset = 0;
+	image_header_t *hdr;
+	nand_info_t *nand;
+
+	switch (argc) {
+	case 1:
+		addr = CFG_LOAD_ADDR;
+		boot_device = getenv("bootdevice");
+		break;
+	case 2:
+		addr = simple_strtoul(argv[1], NULL, 16);
+		boot_device = getenv("bootdevice");
+		break;
+	case 3:
+		addr = simple_strtoul(argv[1], NULL, 16);
+		boot_device = argv[2];
+		break;
+	case 4:
+		addr = simple_strtoul(argv[1], NULL, 16);
+		boot_device = argv[2];
+		offset = simple_strtoul(argv[3], NULL, 16);
+		break;
+	default:
+		printf("Usage:\n%s\n", cmdtp->usage);
+		SHOW_BOOT_PROGRESS(-1);
+		return 1;
+	}
+
+	if (!boot_device) {
+		puts("\n** No boot device **\n");
+		SHOW_BOOT_PROGRESS(-1);
+		return 1;
+	}
+
+	dev = simple_strtoul(boot_device, &ep, 16);
+
+	if (dev < 0 || dev >= CFG_MAX_NAND_DEVICE || !nand_info[dev].name) {
+		printf("\n** Device %d not available\n", dev);
+		SHOW_BOOT_PROGRESS(-1);
+		return 1;
+	}
+
+	nand = &nand_info[dev];
+	printf("\nLoading from device %d: %s (offset 0x%lx)\n",
+	       dev, nand->name, offset);
+
+	cnt = nand->oobblock;
+	r = nand_read(nand, offset, &cnt, (u_char *) addr);
+	if (r) {
+		printf("** Read error on %d\n", dev);
+		SHOW_BOOT_PROGRESS(-1);
+		return 1;
+	}
+
+	hdr = (image_header_t *) addr;
+
+	if (ntohl(hdr->ih_magic) != IH_MAGIC) {
+		printf("\n** Bad Magic Number 0x%x **\n", hdr->ih_magic);
+		SHOW_BOOT_PROGRESS(-1);
+		return 1;
+	}
+
+	print_image_hdr(hdr);
+
+	cnt = (ntohl(hdr->ih_size) + sizeof (image_header_t));
+
+	r = nand_read(nand, offset, &cnt, (u_char *) addr);
+	if (r) {
+		printf("** Read error on %d\n", dev);
+		SHOW_BOOT_PROGRESS(-1);
+		return 1;
+	}
+
+	/* Loading ok, update default load address */
+
+	load_addr = addr;
+
+	/* Check if we should attempt an auto-start */
+	if (((ep = getenv("autostart")) != NULL) && (strcmp(ep, "yes") == 0)) {
+		char *local_args[2];
+		extern int do_bootm(cmd_tbl_t *, int, int, char *[]);
+
+		local_args[0] = argv[0];
+		local_args[1] = NULL;
+
+		printf("Automatic boot of image at addr 0x%08lx ...\n", addr);
+
+		do_bootm(cmdtp, 0, 1, local_args);
+		return 1;
+	}
+	return 0;
+}
+
+U_BOOT_CMD(nboot, 4, 1, do_nandboot,
+	"nboot   - boot from NAND device\n", "loadAddr dev\n");
+
+
+#endif				/* (CONFIG_COMMANDS & CFG_CMD_NAND) */
diff --git a/cpu/arm925t/config.mk b/cpu/arm925t/config.mk
index cef7d26..960df4c 100644
--- a/cpu/arm925t/config.mk
+++ b/cpu/arm925t/config.mk
@@ -22,6 +22,6 @@
 #
 
 PLATFORM_RELFLAGS += -fno-strict-aliasing  -fno-common -ffixed-r8 \
-	-mshort-load-bytes -msoft-float
+	-msoft-float
 
 PLATFORM_CPPFLAGS += -mapcs-32 -march=armv4
diff --git a/drivers/nand/Makefile b/drivers/nand/Makefile
index 3906bf9..96f67df 100644
--- a/drivers/nand/Makefile
+++ b/drivers/nand/Makefile
@@ -14,4 +14,3 @@ $(LIB):	$(OBJS)
 		$(CC) -M $(CFLAGS) $(OBJS:.o=.c) > $@
 
 sinclude .depend
-
diff --git a/drivers/nand/diskonchip.c b/drivers/nand/diskonchip.c
index 02135c3..b421d4c 100644
--- a/drivers/nand/diskonchip.c
+++ b/drivers/nand/diskonchip.c
@@ -1,4 +1,4 @@
-/* 
+/*
  * drivers/mtd/nand/diskonchip.c
  *
  * (C) 2003 Red Hat, Inc.
@@ -8,12 +8,12 @@
  * Author: David Woodhouse <dwmw2@infradead.org>
  * Additional Diskonchip 2000 and Millennium support by Dan Brown <dan_brown@ieee.org>
  * Diskonchip Millennium Plus support by Kalev Lember <kalev@smartlink.ee>
- * 
+ *
  * Error correction code lifted from the old docecc code
- * Author: Fabrice Bellard (fabrice.bellard@netgem.com) 
+ * Author: Fabrice Bellard (fabrice.bellard@netgem.com)
  * Copyright (C) 2000 Netgem S.A.
  * converted to the generic Reed-Solomon library by Thomas Gleixner <tglx@linutronix.de>
- *  
+ *
  * Interface to generic NAND code for M-Systems DiskOnChip devices
  *
  * $Id: diskonchip.c,v 1.45 2005/01/05 18:05:14 dwmw2 Exp $
@@ -42,25 +42,25 @@
 static unsigned long __initdata doc_locations[] = {
 #if defined (__alpha__) || defined(__i386__) || defined(__x86_64__)
 #ifdef CONFIG_MTD_DISKONCHIP_PROBE_HIGH
-	0xfffc8000, 0xfffca000, 0xfffcc000, 0xfffce000, 
+	0xfffc8000, 0xfffca000, 0xfffcc000, 0xfffce000,
 	0xfffd0000, 0xfffd2000, 0xfffd4000, 0xfffd6000,
-	0xfffd8000, 0xfffda000, 0xfffdc000, 0xfffde000, 
-	0xfffe0000, 0xfffe2000, 0xfffe4000, 0xfffe6000, 
+	0xfffd8000, 0xfffda000, 0xfffdc000, 0xfffde000,
+	0xfffe0000, 0xfffe2000, 0xfffe4000, 0xfffe6000,
 	0xfffe8000, 0xfffea000, 0xfffec000, 0xfffee000,
 #else /*  CONFIG_MTD_DOCPROBE_HIGH */
-	0xc8000, 0xca000, 0xcc000, 0xce000, 
+	0xc8000, 0xca000, 0xcc000, 0xce000,
 	0xd0000, 0xd2000, 0xd4000, 0xd6000,
-	0xd8000, 0xda000, 0xdc000, 0xde000, 
-	0xe0000, 0xe2000, 0xe4000, 0xe6000, 
+	0xd8000, 0xda000, 0xdc000, 0xde000,
+	0xe0000, 0xe2000, 0xe4000, 0xe6000,
 	0xe8000, 0xea000, 0xec000, 0xee000,
 #endif /*  CONFIG_MTD_DOCPROBE_HIGH */
 #elif defined(__PPC__)
 	0xe4000000,
 #elif defined(CONFIG_MOMENCO_OCELOT)
 	0x2f000000,
-        0xff000000,
+	0xff000000,
 #elif defined(CONFIG_MOMENCO_OCELOT_G) || defined (CONFIG_MOMENCO_OCELOT_C)
-        0xff000000,
+	0xff000000,
 ##else
 #warning Unknown architecture for DiskOnChip. No default probe locations defined
 #endif
@@ -142,7 +142,7 @@ MODULE_PARM_DESC(doc_config_location, "Physical memory address at which to probe
 /* the Reed Solomon control structure */
 static struct rs_control *rs_decoder;
 
-/* 
+/*
  * The HW decoder in the DoC ASIC's provides us a error syndrome,
  * which we must convert to a standard syndrom usable by the generic
  * Reed-Solomon library code.
@@ -167,8 +167,8 @@ static int doc_ecc_decode (struct rs_control *rs, uint8_t *data, uint8_t *ecc)
 	/* Initialize the syndrom buffer */
 	for (i = 0; i < NROOTS; i++)
 		s[i] = ds[0];
-	/* 
-	 *  Evaluate 
+	/*
+	 *  Evaluate
 	 *  s[i] = ds[3]x^3 + ds[2]x^2 + ds[1]x^1 + ds[0]
 	 *  where x = alpha^(FCR + i)
 	 */
@@ -192,7 +192,7 @@ static int doc_ecc_decode (struct rs_control *rs, uint8_t *data, uint8_t *ecc)
 	if (nerr < 0)
 		return nerr;
 
-	/* 
+	/*
 	 * Correct the errors. The bitpositions are a bit of magic,
 	 * but they are given by the design of the de/encoder circuit
 	 * in the DoC ASIC's.
@@ -209,7 +209,7 @@ static int doc_ecc_decode (struct rs_control *rs, uint8_t *data, uint8_t *ecc)
 			   can be modified since pos is even */
 			index = (pos >> 3) ^ 1;
 			bitpos = pos & 7;
-			if ((index >= 0 && index < SECTOR_SIZE) || 
+			if ((index >= 0 && index < SECTOR_SIZE) ||
 			    index == (SECTOR_SIZE + 1)) {
 				val = (uint8_t) (errval[i] >> (2 + bitpos));
 				parity ^= val;
@@ -220,7 +220,7 @@ static int doc_ecc_decode (struct rs_control *rs, uint8_t *data, uint8_t *ecc)
 			bitpos = (bitpos + 10) & 7;
 			if (bitpos == 0)
 				bitpos = 8;
-			if ((index >= 0 && index < SECTOR_SIZE) || 
+			if ((index >= 0 && index < SECTOR_SIZE) ||
 			    index == (SECTOR_SIZE + 1)) {
 				val = (uint8_t)(errval[i] << (8 - bitpos));
 				parity ^= val;
@@ -237,7 +237,7 @@ static void DoC_Delay(struct doc_priv *doc, unsigned short cycles)
 {
 	volatile char dummy;
 	int i;
-	
+
 	for (i = 0; i < cycles; i++) {
 		if (DoC_is_Millennium(doc))
 			dummy = ReadDOC(doc->virtadr, NOP);
@@ -246,7 +246,7 @@ static void DoC_Delay(struct doc_priv *doc, unsigned short cycles)
 		else
 			dummy = ReadDOC(doc->virtadr, DOCStatus);
 	}
-	
+
 }
 
 #define CDSN_CTRL_FR_B_MASK	(CDSN_CTRL_FR_B0 | CDSN_CTRL_FR_B1)
@@ -254,7 +254,7 @@ static void DoC_Delay(struct doc_priv *doc, unsigned short cycles)
 /* DOC_WaitReady: Wait for RDY line to be asserted by the flash chip */
 static int _DoC_WaitReady(struct doc_priv *doc)
 {
-        void __iomem *docptr = doc->virtadr;
+	void __iomem *docptr = doc->virtadr;
 	unsigned long timeo = jiffies + (HZ * 10);
 
 	if(debug) printk("_DoC_WaitReady...\n");
@@ -284,7 +284,7 @@ static int _DoC_WaitReady(struct doc_priv *doc)
 
 static inline int DoC_WaitReady(struct doc_priv *doc)
 {
-        void __iomem *docptr = doc->virtadr;
+	void __iomem *docptr = doc->virtadr;
 	int ret = 0;
 
 	if (DoC_is_MillenniumPlus(doc)) {
@@ -310,7 +310,7 @@ static void doc2000_write_byte(struct mtd_info *mtd, u_char datum)
 {
 	struct nand_chip *this = mtd->priv;
 	struct doc_priv *doc = this->priv;
-        void __iomem *docptr = doc->virtadr;
+	void __iomem *docptr = doc->virtadr;
 
 	if(debug)printk("write_byte %02x\n", datum);
 	WriteDOC(datum, docptr, CDSNSlowIO);
@@ -321,7 +321,7 @@ static u_char doc2000_read_byte(struct mtd_info *mtd)
 {
 	struct nand_chip *this = mtd->priv;
 	struct doc_priv *doc = this->priv;
-        void __iomem *docptr = doc->virtadr;
+	void __iomem *docptr = doc->virtadr;
 	u_char ret;
 
 	ReadDOC(docptr, CDSNSlowIO);
@@ -331,12 +331,12 @@ static u_char doc2000_read_byte(struct mtd_info *mtd)
 	return ret;
 }
 
-static void doc2000_writebuf(struct mtd_info *mtd, 
+static void doc2000_writebuf(struct mtd_info *mtd,
 			     const u_char *buf, int len)
 {
 	struct nand_chip *this = mtd->priv;
 	struct doc_priv *doc = this->priv;
-        void __iomem *docptr = doc->virtadr;
+	void __iomem *docptr = doc->virtadr;
 	int i;
 	if (debug)printk("writebuf of %d bytes: ", len);
 	for (i=0; i < len; i++) {
@@ -347,12 +347,12 @@ static void doc2000_writebuf(struct mtd_info *mtd,
 	if (debug) printk("\n");
 }
 
-static void doc2000_readbuf(struct mtd_info *mtd, 
+static void doc2000_readbuf(struct mtd_info *mtd,
 			    u_char *buf, int len)
 {
 	struct nand_chip *this = mtd->priv;
 	struct doc_priv *doc = this->priv;
-        void __iomem *docptr = doc->virtadr;
+	void __iomem *docptr = doc->virtadr;
  	int i;
 
 	if (debug)printk("readbuf of %d bytes: ", len);
@@ -362,12 +362,12 @@ static void doc2000_readbuf(struct mtd_info *mtd,
 	}
 }
 
-static void doc2000_readbuf_dword(struct mtd_info *mtd, 
+static void doc2000_readbuf_dword(struct mtd_info *mtd,
 			    u_char *buf, int len)
 {
 	struct nand_chip *this = mtd->priv;
 	struct doc_priv *doc = this->priv;
-        void __iomem *docptr = doc->virtadr;
+	void __iomem *docptr = doc->virtadr;
  	int i;
 
 	if (debug) printk("readbuf_dword of %d bytes: ", len);
@@ -383,12 +383,12 @@ static void doc2000_readbuf_dword(struct mtd_info *mtd,
 	}
 }
 
-static int doc2000_verifybuf(struct mtd_info *mtd, 
+static int doc2000_verifybuf(struct mtd_info *mtd,
 			      const u_char *buf, int len)
 {
 	struct nand_chip *this = mtd->priv;
 	struct doc_priv *doc = this->priv;
-        void __iomem *docptr = doc->virtadr;
+	void __iomem *docptr = doc->virtadr;
 	int i;
 
 	for (i=0; i < len; i++)
@@ -435,7 +435,7 @@ static uint16_t __init doc200x_ident_chip(struct mtd_info *mtd, int nr)
 			this->read_buf = &doc2000_readbuf_dword;
 		}
 	}
-		
+
 	return ret;
 }
 
@@ -466,7 +466,7 @@ static int doc200x_wait(struct mtd_info *mtd, struct nand_chip *this, int state)
 	struct doc_priv *doc = this->priv;
 
 	int status;
-	
+
 	DoC_WaitReady(doc);
 	this->cmdfunc(mtd, NAND_CMD_STATUS, -1, -1);
 	DoC_WaitReady(doc);
@@ -479,7 +479,7 @@ static void doc2001_write_byte(struct mtd_info *mtd, u_char datum)
 {
 	struct nand_chip *this = mtd->priv;
 	struct doc_priv *doc = this->priv;
-        void __iomem *docptr = doc->virtadr;
+	void __iomem *docptr = doc->virtadr;
 
 	WriteDOC(datum, docptr, CDSNSlowIO);
 	WriteDOC(datum, docptr, Mil_CDSN_IO);
@@ -490,22 +490,22 @@ static u_char doc2001_read_byte(struct mtd_info *mtd)
 {
 	struct nand_chip *this = mtd->priv;
 	struct doc_priv *doc = this->priv;
-        void __iomem *docptr = doc->virtadr;
+	void __iomem *docptr = doc->virtadr;
 
-	//ReadDOC(docptr, CDSNSlowIO);
+	/*ReadDOC(docptr, CDSNSlowIO); */
 	/* 11.4.5 -- delay twice to allow extended length cycle */
 	DoC_Delay(doc, 2);
 	ReadDOC(docptr, ReadPipeInit);
-	//return ReadDOC(docptr, Mil_CDSN_IO);
+	/*return ReadDOC(docptr, Mil_CDSN_IO); */
 	return ReadDOC(docptr, LastDataRead);
 }
 
-static void doc2001_writebuf(struct mtd_info *mtd, 
+static void doc2001_writebuf(struct mtd_info *mtd,
 			     const u_char *buf, int len)
 {
 	struct nand_chip *this = mtd->priv;
 	struct doc_priv *doc = this->priv;
-        void __iomem *docptr = doc->virtadr;
+	void __iomem *docptr = doc->virtadr;
 	int i;
 
 	for (i=0; i < len; i++)
@@ -514,12 +514,12 @@ static void doc2001_writebuf(struct mtd_info *mtd,
 	WriteDOC(0x00, docptr, WritePipeTerm);
 }
 
-static void doc2001_readbuf(struct mtd_info *mtd, 
+static void doc2001_readbuf(struct mtd_info *mtd,
 			    u_char *buf, int len)
 {
 	struct nand_chip *this = mtd->priv;
 	struct doc_priv *doc = this->priv;
-        void __iomem *docptr = doc->virtadr;
+	void __iomem *docptr = doc->virtadr;
 	int i;
 
 	/* Start read pipeline */
@@ -532,12 +532,12 @@ static void doc2001_readbuf(struct mtd_info *mtd,
 	buf[i] = ReadDOC(docptr, LastDataRead);
 }
 
-static int doc2001_verifybuf(struct mtd_info *mtd, 
+static int doc2001_verifybuf(struct mtd_info *mtd,
 			     const u_char *buf, int len)
 {
 	struct nand_chip *this = mtd->priv;
 	struct doc_priv *doc = this->priv;
-        void __iomem *docptr = doc->virtadr;
+	void __iomem *docptr = doc->virtadr;
 	int i;
 
 	/* Start read pipeline */
@@ -557,22 +557,22 @@ static u_char doc2001plus_read_byte(struct mtd_info *mtd)
 {
 	struct nand_chip *this = mtd->priv;
 	struct doc_priv *doc = this->priv;
-        void __iomem *docptr = doc->virtadr;
+	void __iomem *docptr = doc->virtadr;
 	u_char ret;
 
-        ReadDOC(docptr, Mplus_ReadPipeInit);
-        ReadDOC(docptr, Mplus_ReadPipeInit);
-        ret = ReadDOC(docptr, Mplus_LastDataRead);
+	ReadDOC(docptr, Mplus_ReadPipeInit);
+	ReadDOC(docptr, Mplus_ReadPipeInit);
+	ret = ReadDOC(docptr, Mplus_LastDataRead);
 	if (debug) printk("read_byte returns %02x\n", ret);
 	return ret;
 }
 
-static void doc2001plus_writebuf(struct mtd_info *mtd, 
+static void doc2001plus_writebuf(struct mtd_info *mtd,
 			     const u_char *buf, int len)
 {
 	struct nand_chip *this = mtd->priv;
 	struct doc_priv *doc = this->priv;
-        void __iomem *docptr = doc->virtadr;
+	void __iomem *docptr = doc->virtadr;
 	int i;
 
 	if (debug)printk("writebuf of %d bytes: ", len);
@@ -584,12 +584,12 @@ static void doc2001plus_writebuf(struct mtd_info *mtd,
 	if (debug) printk("\n");
 }
 
-static void doc2001plus_readbuf(struct mtd_info *mtd, 
+static void doc2001plus_readbuf(struct mtd_info *mtd,
 			    u_char *buf, int len)
 {
 	struct nand_chip *this = mtd->priv;
 	struct doc_priv *doc = this->priv;
-        void __iomem *docptr = doc->virtadr;
+	void __iomem *docptr = doc->virtadr;
 	int i;
 
 	if (debug)printk("readbuf of %d bytes: ", len);
@@ -614,12 +614,12 @@ static void doc2001plus_readbuf(struct mtd_info *mtd,
 	if (debug) printk("\n");
 }
 
-static int doc2001plus_verifybuf(struct mtd_info *mtd, 
+static int doc2001plus_verifybuf(struct mtd_info *mtd,
 			     const u_char *buf, int len)
 {
 	struct nand_chip *this = mtd->priv;
 	struct doc_priv *doc = this->priv;
-        void __iomem *docptr = doc->virtadr;
+	void __iomem *docptr = doc->virtadr;
 	int i;
 
 	if (debug)printk("verifybuf of %d bytes: ", len);
@@ -645,7 +645,7 @@ static void doc2001plus_select_chip(struct mtd_info *mtd, int chip)
 {
 	struct nand_chip *this = mtd->priv;
 	struct doc_priv *doc = this->priv;
-        void __iomem *docptr = doc->virtadr;
+	void __iomem *docptr = doc->virtadr;
 	int floor = 0;
 
 	if(debug)printk("select chip (%d)\n", chip);
@@ -671,7 +671,7 @@ static void doc200x_select_chip(struct mtd_info *mtd, int chip)
 {
 	struct nand_chip *this = mtd->priv;
 	struct doc_priv *doc = this->priv;
-        void __iomem *docptr = doc->virtadr;
+	void __iomem *docptr = doc->virtadr;
 	int floor = 0;
 
 	if(debug)printk("select chip (%d)\n", chip);
@@ -698,7 +698,7 @@ static void doc200x_hwcontrol(struct mtd_info *mtd, int cmd)
 {
 	struct nand_chip *this = mtd->priv;
 	struct doc_priv *doc = this->priv;
-        void __iomem *docptr = doc->virtadr;
+	void __iomem *docptr = doc->virtadr;
 
 	switch(cmd) {
 	case NAND_CTL_SETNCE:
@@ -736,7 +736,7 @@ static void doc2001plus_command (struct mtd_info *mtd, unsigned command, int col
 {
 	struct nand_chip *this = mtd->priv;
 	struct doc_priv *doc = this->priv;
-        void __iomem *docptr = doc->virtadr;
+	void __iomem *docptr = doc->virtadr;
 
 	/*
 	 * Must terminate write pipeline before sending any commands
@@ -794,7 +794,7 @@ static void doc2001plus_command (struct mtd_info *mtd, unsigned command, int col
 			WriteDOC(0, docptr, Mplus_FlashControl);
 	}
 
-	/* 
+	/*
 	 * program and erase have their own busy handlers
 	 * status and sequential in needs no delay
 	*/
@@ -819,7 +819,7 @@ static void doc2001plus_command (struct mtd_info *mtd, unsigned command, int col
 
 	/* This applies to read commands */
 	default:
-		/* 
+		/*
 		 * If we don't have access to the busy pin, we apply the given
 		 * command delay
 		*/
@@ -840,7 +840,7 @@ static int doc200x_dev_ready(struct mtd_info *mtd)
 {
 	struct nand_chip *this = mtd->priv;
 	struct doc_priv *doc = this->priv;
-        void __iomem *docptr = doc->virtadr;
+	void __iomem *docptr = doc->virtadr;
 
 	if (DoC_is_MillenniumPlus(doc)) {
 		/* 11.4.2 -- must NOP four times before checking FR/B# */
@@ -878,7 +878,7 @@ static void doc200x_enable_hwecc(struct mtd_info *mtd, int mode)
 {
 	struct nand_chip *this = mtd->priv;
 	struct doc_priv *doc = this->priv;
-        void __iomem *docptr = doc->virtadr;
+	void __iomem *docptr = doc->virtadr;
 
 	/* Prime the ECC engine */
 	switch(mode) {
@@ -897,7 +897,7 @@ static void doc2001plus_enable_hwecc(struct mtd_info *mtd, int mode)
 {
 	struct nand_chip *this = mtd->priv;
 	struct doc_priv *doc = this->priv;
-        void __iomem *docptr = doc->virtadr;
+	void __iomem *docptr = doc->virtadr;
 
 	/* Prime the ECC engine */
 	switch(mode) {
@@ -918,7 +918,7 @@ static int doc200x_calculate_ecc(struct mtd_info *mtd, const u_char *dat,
 {
 	struct nand_chip *this = mtd->priv;
 	struct doc_priv *doc = this->priv;
-        void __iomem *docptr = doc->virtadr;
+	void __iomem *docptr = doc->virtadr;
 	int i;
 	int emptymatch = 1;
 
@@ -942,7 +942,7 @@ static int doc200x_calculate_ecc(struct mtd_info *mtd, const u_char *dat,
 	for (i = 0; i < 6; i++) {
 		if (DoC_is_MillenniumPlus(doc))
 			ecc_code[i] = ReadDOC_(docptr, DoC_Mplus_ECCSyndrome0 + i);
-		else 
+		else
 			ecc_code[i] = ReadDOC_(docptr, DoC_ECCSyndrome0 + i);
 		if (ecc_code[i] != empty_write_ecc[i])
 			emptymatch = 0;
@@ -976,10 +976,10 @@ static int doc200x_correct_data(struct mtd_info *mtd, u_char *dat, u_char *read_
 	int i, ret = 0;
 	struct nand_chip *this = mtd->priv;
 	struct doc_priv *doc = this->priv;
-        void __iomem *docptr = doc->virtadr;
+	void __iomem *docptr = doc->virtadr;
 	volatile u_char dummy;
 	int emptymatch = 1;
-	
+
 	/* flush the pipeline */
 	if (DoC_is_2000(doc)) {
 		dummy = ReadDOC(docptr, 2k_ECCStatus);
@@ -994,7 +994,7 @@ static int doc200x_correct_data(struct mtd_info *mtd, u_char *dat, u_char *read_
 		dummy = ReadDOC(docptr, ECCConf);
 		dummy = ReadDOC(docptr, ECCConf);
 	}
-	
+
 	/* Error occured ? */
 	if (dummy & 0x80) {
 		for (i = 0; i < 6; i++) {
@@ -1032,7 +1032,7 @@ static int doc200x_correct_data(struct mtd_info *mtd, u_char *dat, u_char *read_
 		if (!emptymatch) ret = doc_ecc_decode (rs_decoder, dat, calc_ecc);
 		if (ret > 0)
 			printk(KERN_ERR "doc200x_correct_data corrected %d errors\n", ret);
-	}	
+	}
 	if (DoC_is_MillenniumPlus(doc))
 		WriteDOC(DOC_ECC_DIS, docptr, Mplus_ECCConf);
 	else
@@ -1043,16 +1043,16 @@ static int doc200x_correct_data(struct mtd_info *mtd, u_char *dat, u_char *read_
 	}
 	return ret;
 }
-		
-//u_char mydatabuf[528];
+
+/*u_char mydatabuf[528]; */
 
 static struct nand_oobinfo doc200x_oobinfo = {
-        .useecc = MTD_NANDECC_AUTOPLACE,
-        .eccbytes = 6,
-        .eccpos = {0, 1, 2, 3, 4, 5},
-        .oobfree = { {8, 8} }
+	.useecc = MTD_NANDECC_AUTOPLACE,
+	.eccbytes = 6,
+	.eccpos = {0, 1, 2, 3, 4, 5},
+	.oobfree = { {8, 8} }
 };
- 
+
 /* Find the (I)NFTL Media Header, and optionally also the mirror media header.
    On sucessful return, buf will contain a copy of the media header for
    further processing.  id is the string to scan for, and will presumably be
@@ -1068,7 +1068,7 @@ static int __init find_media_headers(struct mtd_info *mtd, u_char *buf,
 	int ret;
 	size_t retlen;
 
-	end = min(end, mtd->size); // paranoia
+	end = min(end, mtd->size); /* paranoia */
 	for (offs = 0; offs < end; offs += mtd->erasesize) {
 		ret = mtd->read(mtd, offs, mtd->oobblock, &retlen, buf);
 		if (retlen != mtd->oobblock) continue;
@@ -1122,8 +1122,8 @@ static inline int __init nftl_partscan(struct mtd_info *mtd,
 	if (!(numheaders=find_media_headers(mtd, buf, "ANAND", 1))) goto out;
 	mh = (struct NFTLMediaHeader *) buf;
 
-//#ifdef CONFIG_MTD_DEBUG_VERBOSE
-//	if (CONFIG_MTD_DEBUG_VERBOSE >= 2)
+/*#ifdef CONFIG_MTD_DEBUG_VERBOSE */
+/*	if (CONFIG_MTD_DEBUG_VERBOSE >= 2) */
 	printk(KERN_INFO "    DataOrgID        = %s\n"
 			 "    NumEraseUnits    = %d\n"
 			 "    FirstPhysicalEUN = %d\n"
@@ -1132,7 +1132,7 @@ static inline int __init nftl_partscan(struct mtd_info *mtd,
 		mh->DataOrgID, mh->NumEraseUnits,
 		mh->FirstPhysicalEUN, mh->FormattedSize,
 		mh->UnitSizeFactor);
-//#endif
+/*#endif */
 
 	blocks = mtd->size >> this->phys_erase_shift;
 	maxblocks = min(32768U, mtd->erasesize - psize);
@@ -1175,9 +1175,9 @@ static inline int __init nftl_partscan(struct mtd_info *mtd,
 	offs <<= this->page_shift;
 	offs += mtd->erasesize;
 
-	//parts[0].name = " DiskOnChip Boot / Media Header partition";
-	//parts[0].offset = 0;
-	//parts[0].size = offs;
+	/*parts[0].name = " DiskOnChip Boot / Media Header partition"; */
+	/*parts[0].offset = 0; */
+	/*parts[0].size = offs; */
 
 	parts[0].name = " DiskOnChip BDTL partition";
 	parts[0].offset = offs;
@@ -1232,9 +1232,9 @@ static inline int __init inftl_partscan(struct mtd_info *mtd,
 	mh->BlockMultiplierBits = le32_to_cpu(mh->BlockMultiplierBits);
 	mh->FormatFlags = le32_to_cpu(mh->FormatFlags);
 	mh->PercentUsed = le32_to_cpu(mh->PercentUsed);
- 
-//#ifdef CONFIG_MTD_DEBUG_VERBOSE
-//	if (CONFIG_MTD_DEBUG_VERBOSE >= 2)
+
+/*#ifdef CONFIG_MTD_DEBUG_VERBOSE */
+/*	if (CONFIG_MTD_DEBUG_VERBOSE >= 2) */
 	printk(KERN_INFO "    bootRecordID          = %s\n"
 			 "    NoOfBootImageBlocks   = %d\n"
 			 "    NoOfBinaryPartitions  = %d\n"
@@ -1252,7 +1252,7 @@ static inline int __init inftl_partscan(struct mtd_info *mtd,
 		((unsigned char *) &mh->OsakVersion)[2] & 0xf,
 		((unsigned char *) &mh->OsakVersion)[3] & 0xf,
 		mh->PercentUsed);
-//#endif
+/*#endif */
 
 	vshift = this->phys_erase_shift + mh->BlockMultiplierBits;
 
@@ -1278,8 +1278,8 @@ static inline int __init inftl_partscan(struct mtd_info *mtd,
 		ip->spareUnits = le32_to_cpu(ip->spareUnits);
 		ip->Reserved0 = le32_to_cpu(ip->Reserved0);
 
-//#ifdef CONFIG_MTD_DEBUG_VERBOSE
-//		if (CONFIG_MTD_DEBUG_VERBOSE >= 2)
+/*#ifdef CONFIG_MTD_DEBUG_VERBOSE */
+/*		if (CONFIG_MTD_DEBUG_VERBOSE >= 2) */
 		printk(KERN_INFO	"    PARTITION[%d] ->\n"
 			"        virtualUnits    = %d\n"
 			"        firstUnit       = %d\n"
@@ -1289,7 +1289,7 @@ static inline int __init inftl_partscan(struct mtd_info *mtd,
 			i, ip->virtualUnits, ip->firstUnit,
 			ip->lastUnit, ip->flags,
 			ip->spareUnits);
-//#endif
+/*#endif */
 
 /*
 		if ((i == 0) && (ip->firstUnit > 0)) {
@@ -1456,7 +1456,7 @@ static inline int __init doc2001_init(struct mtd_info *mtd)
 	ReadDOC(doc->virtadr, ChipID);
 	if (ReadDOC(doc->virtadr, ChipID) != DOC_ChipID_DocMil) {
 		/* It's not a Millennium; it's one of the newer
-		   DiskOnChip 2000 units with a similar ASIC. 
+		   DiskOnChip 2000 units with a similar ASIC.
 		   Treat it like a Millennium, except that it
 		   can have multiple chips. */
 		doc2000_count_chips(mtd);
@@ -1518,20 +1518,20 @@ static inline int __init doc_probe(unsigned long physadr)
 	 * to the DOCControl register. So we store the current contents
 	 * of the DOCControl register's location, in case we later decide
 	 * that it's not a DiskOnChip, and want to put it back how we
-	 * found it. 
+	 * found it.
 	 */
 	save_control = ReadDOC(virtadr, DOCControl);
 
 	/* Reset the DiskOnChip ASIC */
-	WriteDOC(DOC_MODE_CLR_ERR | DOC_MODE_MDWREN | DOC_MODE_RESET, 
+	WriteDOC(DOC_MODE_CLR_ERR | DOC_MODE_MDWREN | DOC_MODE_RESET,
 		 virtadr, DOCControl);
-	WriteDOC(DOC_MODE_CLR_ERR | DOC_MODE_MDWREN | DOC_MODE_RESET, 
+	WriteDOC(DOC_MODE_CLR_ERR | DOC_MODE_MDWREN | DOC_MODE_RESET,
 		 virtadr, DOCControl);
 
 	/* Enable the DiskOnChip ASIC */
-	WriteDOC(DOC_MODE_CLR_ERR | DOC_MODE_MDWREN | DOC_MODE_NORMAL, 
+	WriteDOC(DOC_MODE_CLR_ERR | DOC_MODE_MDWREN | DOC_MODE_NORMAL,
 		 virtadr, DOCControl);
-	WriteDOC(DOC_MODE_CLR_ERR | DOC_MODE_MDWREN | DOC_MODE_NORMAL, 
+	WriteDOC(DOC_MODE_CLR_ERR | DOC_MODE_MDWREN | DOC_MODE_NORMAL,
 		 virtadr, DOCControl);
 
 	ChipID = ReadDOC(virtadr, ChipID);
@@ -1614,11 +1614,11 @@ static inline int __init doc_probe(unsigned long physadr)
 		if (ChipID == DOC_ChipID_DocMilPlus16) {
 			WriteDOC(~newval, virtadr, Mplus_AliasResolution);
 			oldval = ReadDOC(doc->virtadr, Mplus_AliasResolution);
-			WriteDOC(newval, virtadr, Mplus_AliasResolution); // restore it
+			WriteDOC(newval, virtadr, Mplus_AliasResolution); /* restore it */
 		} else {
 			WriteDOC(~newval, virtadr, AliasResolution);
 			oldval = ReadDOC(doc->virtadr, AliasResolution);
-			WriteDOC(newval, virtadr, AliasResolution); // restore it
+			WriteDOC(newval, virtadr, AliasResolution); /* restore it */
 		}
 		newval = ~newval;
 		if (oldval == newval) {
@@ -1726,7 +1726,7 @@ static int __init init_nanddoc(void)
 	int i, ret = 0;
 
 	/* We could create the decoder on demand, if memory is a concern.
-	 * This way we have it handy, if an error happens 
+	 * This way we have it handy, if an error happens
 	 *
 	 * Symbolsize is 10 (bits)
 	 * Primitve polynomial is x^10+x^3+1
diff --git a/drivers/nand/nand_base.c b/drivers/nand/nand_base.c
index c423512..a7ab8c2 100644
--- a/drivers/nand/nand_base.c
+++ b/drivers/nand/nand_base.c
@@ -5,14 +5,14 @@
  *   This is the generic MTD driver for NAND flash devices. It should be
  *   capable of working with almost all NAND chips currently available.
  *   Basic support for AG-AND chips is provided.
- *   
+ *
  *	Additional technical information is available on
  *	http://www.linux-mtd.infradead.org/tech/nand.html
- *	
+ *
  *  Copyright (C) 2000 Steven J. Hill (sjhill@realitydiluted.com)
  * 		  2002 Thomas Gleixner (tglx@linutronix.de)
  *
- *  02-08-2004  tglx: support for strange chips, which cannot auto increment 
+ *  02-08-2004  tglx: support for strange chips, which cannot auto increment
  *		pages on read / read_oob
  *
  *  03-17-2004  tglx: Check ready before auto increment check. Simon Bayes
@@ -21,7 +21,7 @@
  *		Make reads over block boundaries work too
  *
  *  04-14-2004	tglx: first working version for 2k page size chips
- *  
+ *
  *  05-19-2004  tglx: Basic support for Renesas AG-AND chips
  *
  *  09-24-2004  tglx: add support for hardware controllers (e.g. ECC) shared
@@ -29,8 +29,8 @@
  *		from Ben Dooks <ben-mtd@fluff.org>
  *
  * Credits:
- *	David Woodhouse for adding multichip support  
- *	
+ *	David Woodhouse for adding multichip support
+ *
  *	Aleph One Ltd. and Toby Churchill Ltd. for supporting the
  *	rework for 2K page size chips
  *
@@ -68,7 +68,7 @@
 #include <linux/mtd/partitions.h>
 #endif
 
-#else
+#endif
 
 #include <common.h>
 
@@ -88,8 +88,6 @@
 #include <jffs2/jffs2.h>
 #endif
 
-#endif
-
 /* Define default oob placement schemes for large and small page devices */
 static struct nand_oobinfo nand_oob_8 = {
 	.useecc = MTD_NANDECC_AUTOPLACE,
@@ -109,8 +107,8 @@ static struct nand_oobinfo nand_oob_64 = {
 	.useecc = MTD_NANDECC_AUTOPLACE,
 	.eccbytes = 24,
 	.eccpos = {
-		40, 41, 42, 43, 44, 45, 46, 47, 
-		48, 49, 50, 51, 52, 53, 54, 55, 
+		40, 41, 42, 43, 44, 45, 46, 47,
+		48, 49, 50, 51, 52, 53, 54, 55,
 		56, 57, 58, 59, 60, 61, 62, 63},
 	.oobfree = { {2, 38} }
 };
@@ -156,19 +154,19 @@ static void nand_sync (struct mtd_info *mtd);
 static int nand_write_page (struct mtd_info *mtd, struct nand_chip *this, int page, u_char *oob_buf,
 		struct nand_oobinfo *oobsel, int mode);
 #ifdef CONFIG_MTD_NAND_VERIFY_WRITE
-static int nand_verify_pages (struct mtd_info *mtd, struct nand_chip *this, int page, int numpages, 
+static int nand_verify_pages (struct mtd_info *mtd, struct nand_chip *this, int page, int numpages,
 	u_char *oob_buf, struct nand_oobinfo *oobsel, int chipnr, int oobmode);
 #else
 #define nand_verify_pages(...) (0)
 #endif
-		
+
 static void nand_get_device (struct nand_chip *this, struct mtd_info *mtd, int new_state);
 
 /**
  * nand_release_device - [GENERIC] release chip
  * @mtd:	MTD device structure
- * 
- * Deselect, release chip lock and wake up anyone waiting on the device 
+ *
+ * Deselect, release chip lock and wake up anyone waiting on the device
  */
 /* XXX U-BOOT XXX */
 #if 0
@@ -223,7 +221,7 @@ static void nand_write_byte(struct mtd_info *mtd, u_char byte)
  * nand_read_byte16 - [DEFAULT] read one byte endianess aware from the chip
  * @mtd:	MTD device structure
  *
- * Default read function for 16bit buswith with 
+ * Default read function for 16bit buswith with
  * endianess conversion
  */
 static u_char nand_read_byte16(struct mtd_info *mtd)
@@ -250,7 +248,7 @@ static void nand_write_byte16(struct mtd_info *mtd, u_char byte)
  * nand_read_word - [DEFAULT] read one word from the chip
  * @mtd:	MTD device structure
  *
- * Default read function for 16bit buswith without 
+ * Default read function for 16bit buswith without
  * endianess conversion
  */
 static u16 nand_read_word(struct mtd_info *mtd)
@@ -264,7 +262,7 @@ static u16 nand_read_word(struct mtd_info *mtd)
  * @mtd:	MTD device structure
  * @word:	data word to write
  *
- * Default write function for 16bit buswith without 
+ * Default write function for 16bit buswith without
  * endianess conversion
  */
 static void nand_write_word(struct mtd_info *mtd, u16 word)
@@ -285,7 +283,7 @@ static void nand_select_chip(struct mtd_info *mtd, int chip)
 	struct nand_chip *this = mtd->priv;
 	switch(chip) {
 	case -1:
-		this->hwcontrol(mtd, NAND_CTL_CLRNCE);	
+		this->hwcontrol(mtd, NAND_CTL_CLRNCE);
 		break;
 	case 0:
 		this->hwcontrol(mtd, NAND_CTL_SETNCE);
@@ -314,7 +312,7 @@ static void nand_write_buf(struct mtd_info *mtd, const u_char *buf, int len)
 }
 
 /**
- * nand_read_buf - [DEFAULT] read chip data into buffer 
+ * nand_read_buf - [DEFAULT] read chip data into buffer
  * @mtd:	MTD device structure
  * @buf:	buffer to store date
  * @len:	number of bytes to read
@@ -331,7 +329,7 @@ static void nand_read_buf(struct mtd_info *mtd, u_char *buf, int len)
 }
 
 /**
- * nand_verify_buf - [DEFAULT] Verify chip data against buffer 
+ * nand_verify_buf - [DEFAULT] Verify chip data against buffer
  * @mtd:	MTD device structure
  * @buf:	buffer containing the data to compare
  * @len:	number of bytes to compare
@@ -364,14 +362,14 @@ static void nand_write_buf16(struct mtd_info *mtd, const u_char *buf, int len)
 	struct nand_chip *this = mtd->priv;
 	u16 *p = (u16 *) buf;
 	len >>= 1;
-	
+
 	for (i=0; i<len; i++)
 		writew(p[i], this->IO_ADDR_W);
-		
+
 }
 
 /**
- * nand_read_buf16 - [DEFAULT] read chip data into buffer 
+ * nand_read_buf16 - [DEFAULT] read chip data into buffer
  * @mtd:	MTD device structure
  * @buf:	buffer to store date
  * @len:	number of bytes to read
@@ -390,7 +388,7 @@ static void nand_read_buf16(struct mtd_info *mtd, u_char *buf, int len)
 }
 
 /**
- * nand_verify_buf16 - [DEFAULT] Verify chip data against buffer 
+ * nand_verify_buf16 - [DEFAULT] Verify chip data against buffer
  * @mtd:	MTD device structure
  * @buf:	buffer containing the data to compare
  * @len:	number of bytes to compare
@@ -417,7 +415,7 @@ static int nand_verify_buf16(struct mtd_info *mtd, const u_char *buf, int len)
  * @ofs:	offset from device start
  * @getchip:	0, if the chip is already selected
  *
- * Check, if the block is bad. 
+ * Check, if the block is bad.
  */
 static int nand_block_bad(struct mtd_info *mtd, loff_t ofs, int getchip)
 {
@@ -434,8 +432,8 @@ static int nand_block_bad(struct mtd_info *mtd, loff_t ofs, int getchip)
 
 		/* Select the NAND device */
 		this->select_chip(mtd, chipnr);
-	} else 
-		page = (int) ofs;	
+	} else
+		page = (int) ofs;
 
 	if (this->options & NAND_BUSWIDTH_16) {
 		this->cmdfunc (mtd, NAND_CMD_READOOB, this->badblockpos & 0xFE, page & this->pagemask);
@@ -449,12 +447,12 @@ static int nand_block_bad(struct mtd_info *mtd, loff_t ofs, int getchip)
 		if (this->read_byte(mtd) != 0xff)
 			res = 1;
 	}
-		
+
 	if (getchip) {
 		/* Deselect and wake up anyone waiting on the device */
 		nand_release_device(mtd);
-	}	
-	
+	}
+
 	return res;
 }
 
@@ -472,7 +470,7 @@ static int nand_default_block_markbad(struct mtd_info *mtd, loff_t ofs)
 	u_char buf[2] = {0, 0};
 	size_t	retlen;
 	int block;
-	
+
 	/* Get block number */
 	block = ((int) ofs) >> this->bbt_erase_shift;
 	this->bbt[block >> 2] |= 0x01 << ((block & 0x03) << 1);
@@ -480,25 +478,25 @@ static int nand_default_block_markbad(struct mtd_info *mtd, loff_t ofs)
 	/* Do we have a flash based bad block table ? */
 	if (this->options & NAND_USE_FLASH_BBT)
 		return nand_update_bbt (mtd, ofs);
-		
+
 	/* We write two bytes, so we dont have to mess with 16 bit access */
 	ofs += mtd->oobsize + (this->badblockpos & ~0x01);
 	return nand_write_oob (mtd, ofs , 2, &retlen, buf);
 }
 
-/** 
+/**
  * nand_check_wp - [GENERIC] check if the chip is write protected
  * @mtd:	MTD device structure
- * Check, if the device is write protected 
+ * Check, if the device is write protected
  *
- * The function expects, that the device is already selected 
+ * The function expects, that the device is already selected
  */
 static int nand_check_wp (struct mtd_info *mtd)
 {
 	struct nand_chip *this = mtd->priv;
 	/* Check the WP bit */
 	this->cmdfunc (mtd, NAND_CMD_STATUS, -1, -1);
-	return (this->read_byte(mtd) & 0x80) ? 0 : 1; 
+	return (this->read_byte(mtd) & 0x80) ? 0 : 1;
 }
 
 /**
@@ -514,10 +512,10 @@ static int nand_check_wp (struct mtd_info *mtd)
 static int nand_block_checkbad (struct mtd_info *mtd, loff_t ofs, int getchip, int allowbbt)
 {
 	struct nand_chip *this = mtd->priv;
-	
+
 	if (!this->bbt)
 		return this->block_bad(mtd, ofs, getchip);
-	
+
 	/* Return info from the table */
 	return nand_isbad_bbt (mtd, ofs, allowbbt);
 }
@@ -582,13 +580,13 @@ static void nand_command (struct mtd_info *mtd, unsigned command, int column, in
 		/* Latch in address */
 		this->hwcontrol(mtd, NAND_CTL_CLRALE);
 	}
-	
-	/* 
-	 * program and erase have their own busy handlers 
+
+	/*
+	 * program and erase have their own busy handlers
 	 * status and sequential in needs no delay
 	*/
 	switch (command) {
-			
+
 	case NAND_CMD_PAGEPROG:
 	case NAND_CMD_ERASE1:
 	case NAND_CMD_ERASE2:
@@ -597,7 +595,7 @@ static void nand_command (struct mtd_info *mtd, unsigned command, int column, in
 		return;
 
 	case NAND_CMD_RESET:
-		if (this->dev_ready)	
+		if (this->dev_ready)
 			break;
 		udelay(this->chip_delay);
 		this->hwcontrol(mtd, NAND_CTL_SETCLE);
@@ -606,18 +604,18 @@ static void nand_command (struct mtd_info *mtd, unsigned command, int column, in
 		while ( !(this->read_byte(mtd) & 0x40));
 		return;
 
-	/* This applies to read commands */	
+	/* This applies to read commands */
 	default:
-		/* 
+		/*
 		 * If we don't have access to the busy pin, we apply the given
 		 * command delay
 		*/
 		if (!this->dev_ready) {
 			udelay (this->chip_delay);
 			return;
-		}	
+		}
 	}
-	
+
 	/* Apply this short delay always to ensure that we do wait tWB in
 	 * any case on any machine. */
 	ndelay (100);
@@ -646,8 +644,8 @@ static void nand_command_lp (struct mtd_info *mtd, unsigned command, int column,
 		column += mtd->oobblock;
 		command = NAND_CMD_READ0;
 	}
-	
-		
+
+
 	/* Begin command latch cycle */
 	this->hwcontrol(mtd, NAND_CTL_SETCLE);
 	/* Write out the command to the device. */
@@ -665,7 +663,7 @@ static void nand_command_lp (struct mtd_info *mtd, unsigned command, int column,
 				column >>= 1;
 			this->write_byte(mtd, column & 0xff);
 			this->write_byte(mtd, column >> 8);
-		}	
+		}
 		if (page_addr != -1) {
 			this->write_byte(mtd, (unsigned char) (page_addr & 0xff));
 			this->write_byte(mtd, (unsigned char) ((page_addr >> 8) & 0xff));
@@ -676,13 +674,13 @@ static void nand_command_lp (struct mtd_info *mtd, unsigned command, int column,
 		/* Latch in address */
 		this->hwcontrol(mtd, NAND_CTL_CLRALE);
 	}
-	
-	/* 
-	 * program and erase have their own busy handlers 
+
+	/*
+	 * program and erase have their own busy handlers
 	 * status and sequential in needs no delay
 	*/
 	switch (command) {
-			
+
 	case NAND_CMD_CACHEDPROG:
 	case NAND_CMD_PAGEPROG:
 	case NAND_CMD_ERASE1:
@@ -693,7 +691,7 @@ static void nand_command_lp (struct mtd_info *mtd, unsigned command, int column,
 
 
 	case NAND_CMD_RESET:
-		if (this->dev_ready)	
+		if (this->dev_ready)
 			break;
 		udelay(this->chip_delay);
 		this->hwcontrol(mtd, NAND_CTL_SETCLE);
@@ -710,19 +708,19 @@ static void nand_command_lp (struct mtd_info *mtd, unsigned command, int column,
 		/* End command latch cycle */
 		this->hwcontrol(mtd, NAND_CTL_CLRCLE);
 		/* Fall through into ready check */
-		
-	/* This applies to read commands */	
+
+	/* This applies to read commands */
 	default:
-		/* 
+		/*
 		 * If we don't have access to the busy pin, we apply the given
 		 * command delay
 		*/
 		if (!this->dev_ready) {
 			udelay (this->chip_delay);
 			return;
-		}	
+		}
 	}
-	
+
 	/* Apply this short delay always to ensure that we do wait tWB in
 	 * any case on any machine. */
 	ndelay (100);
@@ -734,7 +732,7 @@ static void nand_command_lp (struct mtd_info *mtd, unsigned command, int column,
  * nand_get_device - [GENERIC] Get chip for selected access
  * @this:	the nand chip descriptor
  * @mtd:	MTD device structure
- * @new_state:	the state which is requested 
+ * @new_state:	the state which is requested
  *
  * Get the device and lock it for exclusive access
  */
@@ -746,8 +744,8 @@ static void nand_get_device (struct nand_chip *this, struct mtd_info *mtd, int n
 
 	DECLARE_WAITQUEUE (wait, current);
 
-	/* 
-	 * Grab the lock and see if the device is available 
+	/*
+	 * Grab the lock and see if the device is available
 	*/
 retry:
 	/* Hardware controller shared among independend devices */
@@ -759,7 +757,7 @@ retry:
 			this->controller->active = this;
 		spin_unlock (&this->controller->lock);
 	}
-	
+
 	if (active == this) {
 		spin_lock (&this->chip_lock);
 		if (this->state == FL_READY) {
@@ -767,7 +765,7 @@ retry:
 			spin_unlock (&this->chip_lock);
 			return;
 		}
-	}	
+	}
 	set_current_state (TASK_UNINTERRUPTIBLE);
 	add_wait_queue (&active->wq, &wait);
 	spin_unlock (&active->chip_lock);
@@ -786,7 +784,7 @@ static void nand_get_device (struct nand_chip *this, struct mtd_info *mtd, int n
  * @state:	state to select the max. timeout value
  *
  * Wait for command done. This applies to erase and program only
- * Erase can take up to 400ms and program up to 20ms according to 
+ * Erase can take up to 400ms and program up to 20ms according to
  * general NAND and SmartMedia specs
  *
 */
@@ -796,7 +794,7 @@ static int nand_wait(struct mtd_info *mtd, struct nand_chip *this, int state)
 {
 	unsigned long	timeo = jiffies;
 	int	status;
-	
+
 	if (state == FL_ERASING)
 		 timeo += (HZ * 400) / 1000;
 	else
@@ -808,17 +806,17 @@ static int nand_wait(struct mtd_info *mtd, struct nand_chip *this, int state)
 
 	if ((state == FL_ERASING) && (this->options & NAND_IS_AND))
 		this->cmdfunc (mtd, NAND_CMD_STATUS_MULTI, -1, -1);
-	else	
+	else
 		this->cmdfunc (mtd, NAND_CMD_STATUS, -1, -1);
 
-	while (time_before(jiffies, timeo)) {		
+	while (time_before(jiffies, timeo)) {
 		/* Check, if we were interrupted */
 		if (this->state != state)
 			return 0;
 
 		if (this->dev_ready) {
 			if (this->dev_ready(mtd))
-				break;	
+				break;
 		} else {
 			if (this->read_byte(mtd) & NAND_STATUS_READY)
 				break;
@@ -853,7 +851,7 @@ static int nand_wait(struct mtd_info *mtd, struct nand_chip *this, int state)
  *
  * Cached programming is not supported yet.
  */
-static int nand_write_page (struct mtd_info *mtd, struct nand_chip *this, int page, 
+static int nand_write_page (struct mtd_info *mtd, struct nand_chip *this, int page,
 	u_char *oob_buf,  struct nand_oobinfo *oobsel, int cached)
 {
 	int 	i, status;
@@ -862,10 +860,10 @@ static int nand_write_page (struct mtd_info *mtd, struct nand_chip *this, int pa
 	int  	*oob_config = oobsel->eccpos;
 	int	datidx = 0, eccidx = 0, eccsteps = this->eccsteps;
 	int	eccbytes = 0;
-	
+
 	/* FIXME: Enable cached programming */
 	cached = 0;
-	
+
 	/* Send command to begin auto page programming */
 	this->cmdfunc (mtd, NAND_CMD_SEQIN, 0x00, page);
 
@@ -876,7 +874,7 @@ static int nand_write_page (struct mtd_info *mtd, struct nand_chip *this, int pa
 		printk (KERN_WARNING "Writing data without ECC to NAND-FLASH is not recommended\n");
 		this->write_buf(mtd, this->data_poi, mtd->oobblock);
 		break;
-		
+
 	/* Software ecc 3/256, write all */
 	case NAND_ECC_SOFT:
 		for (; eccsteps; eccsteps--) {
@@ -905,11 +903,11 @@ static int nand_write_page (struct mtd_info *mtd, struct nand_chip *this, int pa
 		}
 		break;
 	}
-										
+
 	/* Write out OOB data */
 	if (this->options & NAND_HWECC_SYNDROME)
 		this->write_buf(mtd, &oob_buf[oobsel->eccbytes], mtd->oobsize - oobsel->eccbytes);
-	else 
+	else
 		this->write_buf(mtd, oob_buf, mtd->oobsize);
 
 	/* Send command to actually program the data */
@@ -926,9 +924,9 @@ static int nand_write_page (struct mtd_info *mtd, struct nand_chip *this, int pa
 	} else {
 		/* FIXME: Implement cached programming ! */
 		/* wait until cache is ready*/
-		// status = this->waitfunc (mtd, this, FL_CACHEDRPG);
+		/* status = this->waitfunc (mtd, this, FL_CACHEDRPG); */
 	}
-	return 0;	
+	return 0;
 }
 
 #ifdef CONFIG_MTD_NAND_VERIFY_WRITE
@@ -944,19 +942,19 @@ static int nand_write_page (struct mtd_info *mtd, struct nand_chip *this, int pa
  * @oobmode:	1 = full buffer verify, 0 = ecc only
  *
  * The NAND device assumes that it is always writing to a cleanly erased page.
- * Hence, it performs its internal write verification only on bits that 
+ * Hence, it performs its internal write verification only on bits that
  * transitioned from 1 to 0. The device does NOT verify the whole page on a
- * byte by byte basis. It is possible that the page was not completely erased 
- * or the page is becoming unusable due to wear. The read with ECC would catch 
- * the error later when the ECC page check fails, but we would rather catch 
+ * byte by byte basis. It is possible that the page was not completely erased
+ * or the page is becoming unusable due to wear. The read with ECC would catch
+ * the error later when the ECC page check fails, but we would rather catch
  * it early in the page write stage. Better to write no data than invalid data.
  */
-static int nand_verify_pages (struct mtd_info *mtd, struct nand_chip *this, int page, int numpages, 
+static int nand_verify_pages (struct mtd_info *mtd, struct nand_chip *this, int page, int numpages,
 	u_char *oob_buf, struct nand_oobinfo *oobsel, int chipnr, int oobmode)
 {
 	int 	i, j, datidx = 0, oobofs = 0, res = -EIO;
 	int	eccsteps = this->eccsteps;
-	int	hweccbytes; 
+	int	hweccbytes;
 	u_char 	oobdata[64];
 
 	hweccbytes = (this->options & NAND_HWECC_SYNDROME) ? (oobsel->eccbytes / eccsteps) : 0;
@@ -996,7 +994,7 @@ static int nand_verify_pages (struct mtd_info *mtd, struct nand_chip *this, int
 
 			if (oobsel->useecc != MTD_NANDECC_OFF && !hweccbytes) {
 				int ecccnt = oobsel->eccbytes;
-		
+
 				for (i = 0; i < ecccnt; i++) {
 					int idx = oobsel->eccpos[i];
 					if (oobdata[idx] != oob_buf[oobofs + idx] ) {
@@ -1006,38 +1004,38 @@ static int nand_verify_pages (struct mtd_info *mtd, struct nand_chip *this, int
 						goto out;
 					}
 				}
-			}	
+			}
 		}
 		oobofs += mtd->oobsize - hweccbytes * eccsteps;
 		page++;
 		numpages--;
 
-		/* Apply delay or wait for ready/busy pin 
+		/* Apply delay or wait for ready/busy pin
 		 * Do this before the AUTOINCR check, so no problems
 		 * arise if a chip which does auto increment
 		 * is marked as NOAUTOINCR by the board driver.
 		 * Do this also before returning, so the chip is
 		 * ready for the next command.
 		*/
-		if (!this->dev_ready) 
+		if (!this->dev_ready)
 			udelay (this->chip_delay);
 		else
-			while (!this->dev_ready(mtd));	
+			while (!this->dev_ready(mtd));
 
 		/* All done, return happy */
 		if (!numpages)
 			return 0;
-		
-			
-		/* Check, if the chip supports auto page increment */ 
+
+
+		/* Check, if the chip supports auto page increment */
 		if (!NAND_CANAUTOINCR(this))
 			this->cmdfunc (mtd, NAND_CMD_READ0, 0x00, page);
 	}
-	/* 
+	/*
 	 * Terminate the read command. We come here in case of an error
 	 * So we must issue a reset command.
 	 */
-out:	 
+out:
 	this->cmdfunc (mtd, NAND_CMD_RESET, -1, -1);
 	return res;
 }
@@ -1056,7 +1054,7 @@ out:
 static int nand_read (struct mtd_info *mtd, loff_t from, size_t len, size_t * retlen, u_char * buf)
 {
 	return nand_read_ecc (mtd, from, len, retlen, buf, NULL, NULL);
-}			   
+}
 
 
 /**
@@ -1080,7 +1078,7 @@ static int nand_read_ecc (struct mtd_info *mtd, loff_t from, size_t len,
 	u_char *data_poi, *oob_data = oob_buf;
 	u_char ecc_calc[32];
 	u_char ecc_code[32];
-        int eccmode, eccsteps;
+	int eccmode, eccsteps;
 	int	*oob_config, datidx;
 	int	blockcheck = (1 << (this->phys_erase_shift - this->page_shift)) - 1;
 	int	eccbytes;
@@ -1103,11 +1101,11 @@ static int nand_read_ecc (struct mtd_info *mtd, loff_t from, size_t len,
 	/* use userspace supplied oobinfo, if zero */
 	if (oobsel == NULL)
 		oobsel = &mtd->oobinfo;
-	
+
 	/* Autoplace of oob data ? Use the default placement scheme */
 	if (oobsel->useecc == MTD_NANDECC_AUTOPLACE)
 		oobsel = this->autooob;
-		
+
 	eccmode = oobsel->useecc ? this->eccmode : NAND_ECC_NONE;
 	oob_config = oobsel->eccpos;
 
@@ -1125,28 +1123,28 @@ static int nand_read_ecc (struct mtd_info *mtd, loff_t from, size_t len,
 	end = mtd->oobblock;
 	ecc = this->eccsize;
 	eccbytes = this->eccbytes;
-	
+
 	if ((eccmode == NAND_ECC_NONE) || (this->options & NAND_HWECC_SYNDROME))
 		compareecc = 0;
 
 	oobreadlen = mtd->oobsize;
-	if (this->options & NAND_HWECC_SYNDROME) 
+	if (this->options & NAND_HWECC_SYNDROME)
 		oobreadlen -= oobsel->eccbytes;
 
 	/* Loop until all data read */
 	while (read < len) {
-		
+
 		int aligned = (!col && (len - read) >= end);
-		/* 
+		/*
 		 * If the read is not page aligned, we have to read into data buffer
 		 * due to ecc, else we read into return buffer direct
 		 */
 		if (aligned)
 			data_poi = &buf[read];
-		else 
+		else
 			data_poi = this->data_buf;
-		
-		/* Check, if we have this page in the buffer 
+
+		/* Check, if we have this page in the buffer
 		 *
 		 * FIXME: Make it work when we must provide oob data too,
 		 * check the usage of data_buf oob field
@@ -1162,7 +1160,7 @@ static int nand_read_ecc (struct mtd_info *mtd, loff_t from, size_t len,
 		if (sndcmd) {
 			this->cmdfunc (mtd, NAND_CMD_READ0, 0x00, page);
 			sndcmd = 0;
-		}	
+		}
 
 		/* get oob area, if we have no oob buffer from fs-driver */
 		if (!oob_buf || oobsel->useecc == MTD_NANDECC_AUTOPLACE ||
@@ -1170,7 +1168,7 @@ static int nand_read_ecc (struct mtd_info *mtd, loff_t from, size_t len,
 			oob_data = &this->data_buf[end];
 
 		eccsteps = this->eccsteps;
-		
+
 		switch (eccmode) {
 		case NAND_ECC_NONE: {	/* No ECC, Read in a page */
 /* XXX U-BOOT XXX */
@@ -1186,12 +1184,12 @@ static int nand_read_ecc (struct mtd_info *mtd, loff_t from, size_t len,
 			this->read_buf(mtd, data_poi, end);
 			break;
 		}
-			
+
 		case NAND_ECC_SOFT:	/* Software ECC 3/256: Read in a page + oob data */
 			this->read_buf(mtd, data_poi, end);
-			for (i = 0, datidx = 0; eccsteps; eccsteps--, i+=3, datidx += ecc) 
+			for (i = 0, datidx = 0; eccsteps; eccsteps--, i+=3, datidx += ecc)
 				this->calculate_ecc(mtd, &data_poi[datidx], &ecc_calc[i]);
-			break;	
+			break;
 
 		default:
 			for (i = 0, datidx = 0; eccsteps; eccsteps--, i+=eccbytes, datidx += ecc) {
@@ -1209,15 +1207,15 @@ static int nand_read_ecc (struct mtd_info *mtd, loff_t from, size_t len,
 					 * generator for an error, reads back the syndrome and
 					 * does the error correction on the fly */
 					if (this->correct_data(mtd, &data_poi[datidx], &oob_data[i], &ecc_code[i]) == -1) {
-						DEBUG (MTD_DEBUG_LEVEL0, "nand_read_ecc: " 
+						DEBUG (MTD_DEBUG_LEVEL0, "nand_read_ecc: "
 							"Failed ECC read, page 0x%08x on chip %d\n", page, chipnr);
 						ecc_failed++;
 					}
 				} else {
 					this->calculate_ecc(mtd, &data_poi[datidx], &ecc_calc[i]);
-				}	
+				}
 			}
-			break;						
+			break;
 		}
 
 		/* read oobdata */
@@ -1225,8 +1223,8 @@ static int nand_read_ecc (struct mtd_info *mtd, loff_t from, size_t len,
 
 		/* Skip ECC check, if not requested (ECC_NONE or HW_ECC with syndromes) */
 		if (!compareecc)
-			goto readoob;	
-		
+			goto readoob;
+
 		/* Pick the ECC bytes out of the oob data */
 		for (j = 0; j < oobsel->eccbytes; j++)
 			ecc_code[j] = oob_data[oob_config[j]];
@@ -1234,24 +1232,24 @@ static int nand_read_ecc (struct mtd_info *mtd, loff_t from, size_t len,
 		/* correct data, if neccecary */
 		for (i = 0, j = 0, datidx = 0; i < this->eccsteps; i++, datidx += ecc) {
 			ecc_status = this->correct_data(mtd, &data_poi[datidx], &ecc_code[j], &ecc_calc[j]);
-			
+
 			/* Get next chunk of ecc bytes */
 			j += eccbytes;
-			
-			/* Check, if we have a fs supplied oob-buffer, 
+
+			/* Check, if we have a fs supplied oob-buffer,
 			 * This is the legacy mode. Used by YAFFS1
 			 * Should go away some day
 			 */
-			if (oob_buf && oobsel->useecc == MTD_NANDECC_PLACE) { 
+			if (oob_buf && oobsel->useecc == MTD_NANDECC_PLACE) {
 				int *p = (int *)(&oob_data[mtd->oobsize]);
 				p[i] = ecc_status;
 			}
-			
-			if (ecc_status == -1) {	
+
+			if (ecc_status == -1) {
 				DEBUG (MTD_DEBUG_LEVEL0, "nand_read_ecc: " "Failed ECC read, page 0x%08x\n", page);
 				ecc_failed++;
 			}
-		}		
+		}
 
 	readoob:
 		/* check, if we have a fs supplied oob-buffer */
@@ -1278,25 +1276,25 @@ static int nand_read_ecc (struct mtd_info *mtd, loff_t from, size_t len,
 		}
 	readdata:
 		/* Partial page read, transfer data into fs buffer */
-		if (!aligned) { 
+		if (!aligned) {
 			for (j = col; j < end && read < len; j++)
 				buf[read++] = data_poi[j];
-			this->pagebuf = realpage;	
-		} else		
+			this->pagebuf = realpage;
+		} else
 			read += mtd->oobblock;
 
-		/* Apply delay or wait for ready/busy pin 
+		/* Apply delay or wait for ready/busy pin
 		 * Do this before the AUTOINCR check, so no problems
 		 * arise if a chip which does auto increment
 		 * is marked as NOAUTOINCR by the board driver.
 		*/
-		if (!this->dev_ready) 
+		if (!this->dev_ready)
 			udelay (this->chip_delay);
 		else
-			while (!this->dev_ready(mtd));	
-			
+			while (!this->dev_ready(mtd));
+
 		if (read == len)
-			break;	
+			break;
 
 		/* For subsequent reads align to page boundary. */
 		col = 0;
@@ -1310,11 +1308,11 @@ static int nand_read_ecc (struct mtd_info *mtd, loff_t from, size_t len,
 			this->select_chip(mtd, -1);
 			this->select_chip(mtd, chipnr);
 		}
-		/* Check, if the chip supports auto page increment 
-		 * or if we have hit a block boundary. 
-		*/ 
+		/* Check, if the chip supports auto page increment
+		 * or if we have hit a block boundary.
+		*/
 		if (!NAND_CANAUTOINCR(this) || !(page & blockcheck))
-			sndcmd = 1;				
+			sndcmd = 1;
 	}
 
 	/* Deselect and wake up anyone waiting on the device */
@@ -1350,7 +1348,7 @@ static int nand_read_oob (struct mtd_info *mtd, loff_t from, size_t len, size_t
 	/* Shift to get page */
 	page = (int)(from >> this->page_shift);
 	chipnr = (int)(from >> this->chip_shift);
-	
+
 	/* Mask to get column */
 	col = from & (mtd->oobsize - 1);
 
@@ -1372,7 +1370,7 @@ static int nand_read_oob (struct mtd_info *mtd, loff_t from, size_t len, size_t
 
 	/* Send the read command */
 	this->cmdfunc (mtd, NAND_CMD_READOOB, col, page & this->pagemask);
-	/* 
+	/*
 	 * Read the data, if we read more than one page
 	 * oob data, let the device transfer the data !
 	 */
@@ -1382,16 +1380,16 @@ static int nand_read_oob (struct mtd_info *mtd, loff_t from, size_t len, size_t
 		thislen = min_t(int, thislen, len);
 		this->read_buf(mtd, &buf[i], thislen);
 		i += thislen;
-		
-		/* Apply delay or wait for ready/busy pin 
+
+		/* Apply delay or wait for ready/busy pin
 		 * Do this before the AUTOINCR check, so no problems
 		 * arise if a chip which does auto increment
 		 * is marked as NOAUTOINCR by the board driver.
 		*/
-		if (!this->dev_ready) 
+		if (!this->dev_ready)
 			udelay (this->chip_delay);
 		else
-			while (!this->dev_ready(mtd));	
+			while (!this->dev_ready(mtd));
 
 		/* Read more ? */
 		if (i < len) {
@@ -1404,13 +1402,13 @@ static int nand_read_oob (struct mtd_info *mtd, loff_t from, size_t len, size_t
 				this->select_chip(mtd, -1);
 				this->select_chip(mtd, chipnr);
 			}
-				
-			/* Check, if the chip supports auto page increment 
-			 * or if we have hit a block boundary. 
-			*/ 
+
+			/* Check, if the chip supports auto page increment
+			 * or if we have hit a block boundary.
+			*/
 			if (!NAND_CANAUTOINCR(this) || !(page & blockcheck)) {
 				/* For subsequent page reads set offset to 0 */
-			        this->cmdfunc (mtd, NAND_CMD_READOOB, 0x0, page & this->pagemask);
+				this->cmdfunc (mtd, NAND_CMD_READOOB, 0x0, page & this->pagemask);
 			}
 		}
 	}
@@ -1453,27 +1451,27 @@ int nand_read_raw (struct mtd_info *mtd, uint8_t *buf, loff_t from, size_t len,
 	nand_get_device (this, mtd , FL_READING);
 
 	this->select_chip (mtd, chip);
-	
+
 	/* Add requested oob length */
 	len += ooblen;
-	
+
 	while (len) {
 		if (sndcmd)
 			this->cmdfunc (mtd, NAND_CMD_READ0, 0, page & this->pagemask);
-		sndcmd = 0;	
+		sndcmd = 0;
 
 		this->read_buf (mtd, &buf[cnt], pagesize);
 
 		len -= pagesize;
 		cnt += pagesize;
 		page++;
-		
-		if (!this->dev_ready) 
+
+		if (!this->dev_ready)
 			udelay (this->chip_delay);
 		else
-			while (!this->dev_ready(mtd));	
-			
-		/* Check, if the chip supports auto page increment */ 
+			while (!this->dev_ready(mtd));
+
+		/* Check, if the chip supports auto page increment */
 		if (!NAND_CANAUTOINCR(this) || !(page & blockcheck))
 			sndcmd = 1;
 	}
@@ -1484,8 +1482,8 @@ int nand_read_raw (struct mtd_info *mtd, uint8_t *buf, loff_t from, size_t len,
 }
 
 
-/** 
- * nand_prepare_oobbuf - [GENERIC] Prepare the out of band buffer 
+/**
+ * nand_prepare_oobbuf - [GENERIC] Prepare the out of band buffer
  * @mtd:	MTD device structure
  * @fsbuf:	buffer given by fs driver
  * @oobsel:	out of band selection structre
@@ -1514,20 +1512,20 @@ static u_char * nand_prepare_oobbuf (struct mtd_info *mtd, u_char *fsbuf, struct
 	int i, len, ofs;
 
 	/* Zero copy fs supplied buffer */
-	if (fsbuf && !autoplace) 
+	if (fsbuf && !autoplace)
 		return fsbuf;
 
 	/* Check, if the buffer must be filled with ff again */
-	if (this->oobdirty) {	
-		memset (this->oob_buf, 0xff, 
+	if (this->oobdirty) {
+		memset (this->oob_buf, 0xff,
 			mtd->oobsize << (this->phys_erase_shift - this->page_shift));
 		this->oobdirty = 0;
-	}	
-	
+	}
+
 	/* If we have no autoplacement or no fs buffer use the internal one */
 	if (!autoplace || !fsbuf)
 		return this->oob_buf;
-	
+
 	/* Walk through the pages and place the data */
 	this->oobdirty = 1;
 	ofs = 0;
@@ -1561,7 +1559,7 @@ static int nand_write (struct mtd_info *mtd, loff_t to, size_t len, size_t * ret
 {
 	return (nand_write_ecc (mtd, to, len, retlen, buf, NULL, NULL));
 }
-			   
+
 /**
  * nand_write_ecc - [MTD Interface] NAND write with ECC
  * @mtd:	MTD device structure
@@ -1594,7 +1592,7 @@ static int nand_write_ecc (struct mtd_info *mtd, loff_t to, size_t len,
 		return -EINVAL;
 	}
 
-	/* reject writes, which are not page aligned */	
+	/* reject writes, which are not page aligned */
 	if (NOTALIGNED (to) || NOTALIGNED(len)) {
 		printk (KERN_NOTICE "nand_write_ecc: Attempt to write not page aligned data\n");
 		return -EINVAL;
@@ -1613,14 +1611,14 @@ static int nand_write_ecc (struct mtd_info *mtd, loff_t to, size_t len,
 		goto out;
 
 	/* if oobsel is NULL, use chip defaults */
-	if (oobsel == NULL) 
-		oobsel = &mtd->oobinfo;		
-		
+	if (oobsel == NULL)
+		oobsel = &mtd->oobinfo;
+
 	/* Autoplace of oob data ? Use the default placement scheme */
 	if (oobsel->useecc == MTD_NANDECC_AUTOPLACE) {
 		oobsel = this->autooob;
 		autoplace = 1;
-	}	
+	}
 	if (oobsel->useecc == MTD_NANDECC_AUTOPL_USR)
 		autoplace = 1;
 
@@ -1628,9 +1626,9 @@ static int nand_write_ecc (struct mtd_info *mtd, loff_t to, size_t len,
 	totalpages = len >> this->page_shift;
 	page = (int) (to >> this->page_shift);
 	/* Invalidate the page cache, if we write to the cached page */
-	if (page <= this->pagebuf && this->pagebuf < (page + totalpages))  
+	if (page <= this->pagebuf && this->pagebuf < (page + totalpages))
 		this->pagebuf = -1;
-	
+
 	/* Set it relative to chip */
 	page &= this->pagemask;
 	startpage = page;
@@ -1652,14 +1650,14 @@ static int nand_write_ecc (struct mtd_info *mtd, loff_t to, size_t len,
 		if (ret) {
 			DEBUG (MTD_DEBUG_LEVEL0, "nand_write_ecc: write_page failed %d\n", ret);
 			goto out;
-		}	
+		}
 		/* Next oob page */
 		oob += mtd->oobsize;
 		/* Update written bytes count */
 		written += mtd->oobblock;
-		if (written == len) 
+		if (written == len)
 			goto cmp;
-		
+
 		/* Increment page address */
 		page++;
 
@@ -1670,13 +1668,13 @@ static int nand_write_ecc (struct mtd_info *mtd, loff_t to, size_t len,
 		if (!(page & (ppblock - 1))){
 			int ofs;
 			this->data_poi = bufstart;
-			ret = nand_verify_pages (mtd, this, startpage, 
+			ret = nand_verify_pages (mtd, this, startpage,
 				page - startpage,
 				oobbuf, oobsel, chipnr, (eccbuf != NULL));
 			if (ret) {
 				DEBUG (MTD_DEBUG_LEVEL0, "nand_write_ecc: verify_pages failed %d\n", ret);
 				goto out;
-			}	
+			}
 			*retlen = written;
 
 			ofs = autoplace ? mtd->oobavail : mtd->oobsize;
@@ -1686,7 +1684,7 @@ static int nand_write_ecc (struct mtd_info *mtd, loff_t to, size_t len,
 			numpages = min (totalpages, ppblock);
 			page &= this->pagemask;
 			startpage = page;
-			oobbuf = nand_prepare_oobbuf (mtd, eccbuf, oobsel, 
+			oobbuf = nand_prepare_oobbuf (mtd, eccbuf, oobsel,
 					autoplace, numpages);
 			/* Check, if we cross a chip boundary */
 			if (!page) {
@@ -1703,7 +1701,7 @@ cmp:
 		oobbuf, oobsel, chipnr, (eccbuf != NULL));
 	if (!ret)
 		*retlen = written;
-	else	
+	else
 		DEBUG (MTD_DEBUG_LEVEL0, "nand_write_ecc: verify_pages failed %d\n", ret);
 
 out:
@@ -1763,7 +1761,7 @@ static int nand_write_oob (struct mtd_info *mtd, loff_t to, size_t len, size_t *
 	/* Check, if it is write protected */
 	if (nand_check_wp(mtd))
 		goto out;
-	
+
 	/* Invalidate the page cache, if we write to the cached page */
 	if (page == this->pagebuf)
 		this->pagebuf = -1;
@@ -1827,10 +1825,10 @@ out:
  *
  * NAND write with kvec. This just calls the ecc function
  */
-static int nand_writev (struct mtd_info *mtd, const struct kvec *vecs, unsigned long count, 
+static int nand_writev (struct mtd_info *mtd, const struct kvec *vecs, unsigned long count,
 		loff_t to, size_t * retlen)
 {
-	return (nand_writev_ecc (mtd, vecs, count, to, retlen, NULL, NULL));	
+	return (nand_writev_ecc (mtd, vecs, count, to, retlen, NULL, NULL));
 }
 
 /**
@@ -1845,7 +1843,7 @@ static int nand_writev (struct mtd_info *mtd, const struct kvec *vecs, unsigned
  *
  * NAND write with iovec with ecc
  */
-static int nand_writev_ecc (struct mtd_info *mtd, const struct kvec *vecs, unsigned long count, 
+static int nand_writev_ecc (struct mtd_info *mtd, const struct kvec *vecs, unsigned long count,
 		loff_t to, size_t * retlen, u_char *eccbuf, struct nand_oobinfo *oobsel)
 {
 	int i, page, len, total_len, ret = -EIO, written = 0, chipnr;
@@ -1871,7 +1869,7 @@ static int nand_writev_ecc (struct mtd_info *mtd, const struct kvec *vecs, unsig
 		return -EINVAL;
 	}
 
-	/* reject writes, which are not page aligned */	
+	/* reject writes, which are not page aligned */
 	if (NOTALIGNED (to) || NOTALIGNED(total_len)) {
 		printk (KERN_NOTICE "nand_write_ecc: Attempt to write not page aligned data\n");
 		return -EINVAL;
@@ -1890,21 +1888,21 @@ static int nand_writev_ecc (struct mtd_info *mtd, const struct kvec *vecs, unsig
 		goto out;
 
 	/* if oobsel is NULL, use chip defaults */
-	if (oobsel == NULL) 
-		oobsel = &mtd->oobinfo;		
+	if (oobsel == NULL)
+		oobsel = &mtd->oobinfo;
 
 	/* Autoplace of oob data ? Use the default placement scheme */
 	if (oobsel->useecc == MTD_NANDECC_AUTOPLACE) {
 		oobsel = this->autooob;
 		autoplace = 1;
-	}	
+	}
 	if (oobsel->useecc == MTD_NANDECC_AUTOPL_USR)
 		autoplace = 1;
 
 	/* Setup start page */
 	page = (int) (to >> this->page_shift);
 	/* Invalidate the page cache, if we write to the cached page */
-	if (page <= this->pagebuf && this->pagebuf < ((to + total_len) >> this->page_shift))  
+	if (page <= this->pagebuf && this->pagebuf < ((to + total_len) >> this->page_shift))
 		this->pagebuf = -1;
 
 	startpage = page & this->pagemask;
@@ -1928,10 +1926,10 @@ static int nand_writev_ecc (struct mtd_info *mtd, const struct kvec *vecs, unsig
 			oob = 0;
 			for (i = 1; i <= numpages; i++) {
 				/* Write one page. If this is the last page to write
-				 * then use the real pageprogram command, else select 
+				 * then use the real pageprogram command, else select
 				 * cached programming if supported by the chip.
 				 */
-				ret = nand_write_page (mtd, this, page & this->pagemask, 
+				ret = nand_write_page (mtd, this, page & this->pagemask,
 					&oobbuf[oob], oobsel, i != numpages);
 				if (ret)
 					goto out;
@@ -1947,12 +1945,12 @@ static int nand_writev_ecc (struct mtd_info *mtd, const struct kvec *vecs, unsig
 				count--;
 			}
 		} else {
-			/* We must use the internal buffer, read data out of each 
+			/* We must use the internal buffer, read data out of each
 			 * tuple until we have a full page to write
 			 */
 			int cnt = 0;
 			while (cnt < mtd->oobblock) {
-				if (vecs->iov_base != NULL && vecs->iov_len) 
+				if (vecs->iov_base != NULL && vecs->iov_len)
 					this->data_buf[cnt++] = ((u_char *) vecs->iov_base)[len++];
 				/* Check, if we have to switch to the next tuple */
 				if (len >= (int) vecs->iov_len) {
@@ -1961,10 +1959,10 @@ static int nand_writev_ecc (struct mtd_info *mtd, const struct kvec *vecs, unsig
 					count--;
 				}
 			}
-			this->pagebuf = page;	
-			this->data_poi = this->data_buf;	
+			this->pagebuf = page;
+			this->data_poi = this->data_buf;
 			bufstart = this->data_poi;
-			numpages = 1;		
+			numpages = 1;
 			oobbuf = nand_prepare_oobbuf (mtd, NULL, oobsel, autoplace, numpages);
 			ret = nand_write_page (mtd, this, page & this->pagemask,
 				oobbuf, oobsel, 0);
@@ -1977,7 +1975,7 @@ static int nand_writev_ecc (struct mtd_info *mtd, const struct kvec *vecs, unsig
 		ret = nand_verify_pages (mtd, this, startpage, numpages, oobbuf, oobsel, chipnr, 0);
 		if (ret)
 			goto out;
-			
+
 		written += mtd->oobblock * numpages;
 		/* All done ? */
 		if (!count)
@@ -2046,7 +2044,7 @@ static int nand_erase (struct mtd_info *mtd, struct erase_info *instr)
 {
 	return nand_erase_nand (mtd, instr, 0);
 }
- 
+
 /**
  * nand_erase_intern - [NAND Interface] erase block(s)
  * @mtd:	MTD device structure
@@ -2116,14 +2114,14 @@ int nand_erase_nand (struct mtd_info *mtd, struct erase_info *instr, int allowbb
 			instr->state = MTD_ERASE_FAILED;
 			goto erase_exit;
 		}
-		
-		/* Invalidate the page cache, if we erase the block which contains 
+
+		/* Invalidate the page cache, if we erase the block which contains
 		   the current cached page */
 		if (page <= this->pagebuf && this->pagebuf < (page + pages_per_block))
 			this->pagebuf = -1;
 
 		this->erase_cmd (mtd, page & this->pagemask);
-		
+
 		status = this->waitfunc (mtd, this, FL_ERASING);
 
 		/* See if block erase succeeded */
@@ -2133,7 +2131,7 @@ int nand_erase_nand (struct mtd_info *mtd, struct erase_info *instr, int allowbb
 			instr->fail_addr = (page << this->page_shift);
 			goto erase_exit;
 		}
-		
+
 		/* Increment page address and decrement length */
 		len -= (1 << this->phys_erase_shift);
 		page += pages_per_block;
@@ -2188,9 +2186,9 @@ static void nand_sync (struct mtd_info *mtd)
 static int nand_block_isbad (struct mtd_info *mtd, loff_t ofs)
 {
 	/* Check for invalid offset */
-	if (ofs > mtd->size) 
+	if (ofs > mtd->size)
 		return -EINVAL;
-	
+
 	return nand_block_checkbad (mtd, ofs, 1, 0);
 }
 
@@ -2204,12 +2202,12 @@ static int nand_block_markbad (struct mtd_info *mtd, loff_t ofs)
 	struct nand_chip *this = mtd->priv;
 	int ret;
 
-        if ((ret = nand_block_isbad(mtd, ofs))) {
-        	/* If it was bad already, return success and do nothing. */
+	if ((ret = nand_block_isbad(mtd, ofs))) {
+		/* If it was bad already, return success and do nothing. */
 		if (ret > 0)
 			return 0;
-        	return ret;
-        }
+		return ret;
+	}
 
 	return this->block_markbad(mtd, ofs);
 }
@@ -2281,13 +2279,13 @@ int nand_scan (struct mtd_info *mtd, int maxchips)
 
 	/* Print and store flash device information */
 	for (i = 0; nand_flash_ids[i].name != NULL; i++) {
-				
-		if (nand_dev_id != nand_flash_ids[i].id) 
+
+		if (nand_dev_id != nand_flash_ids[i].id)
 			continue;
 
 		if (!mtd->name) mtd->name = nand_flash_ids[i].name;
 		this->chipsize = nand_flash_ids[i].chipsize << 20;
-		
+
 		/* New devices have all the information in additional id bytes */
 		if (!nand_flash_ids[i].pagesize) {
 			int extid;
@@ -2306,7 +2304,7 @@ int nand_scan (struct mtd_info *mtd, int maxchips)
 			extid >>= 2;
 			/* Get buswidth information */
 			busw = (extid & 0x01) ? NAND_BUSWIDTH_16 : 0;
-		
+
 		} else {
 			/* Old devices have this data hardcoded in the
 			 * device id table */
@@ -2320,23 +2318,23 @@ int nand_scan (struct mtd_info *mtd, int maxchips)
 		 * this correct ! */
 		if (busw != (this->options & NAND_BUSWIDTH_16)) {
 			printk (KERN_INFO "NAND device: Manufacturer ID:"
-				" 0x%02x, Chip ID: 0x%02x (%s %s)\n", nand_maf_id, nand_dev_id, 
+				" 0x%02x, Chip ID: 0x%02x (%s %s)\n", nand_maf_id, nand_dev_id,
 				nand_manuf_ids[i].name , mtd->name);
-			printk (KERN_WARNING 
-				"NAND bus width %d instead %d bit\n", 
+			printk (KERN_WARNING
+				"NAND bus width %d instead %d bit\n",
 					(this->options & NAND_BUSWIDTH_16) ? 16 : 8,
 					busw ? 16 : 8);
 			this->select_chip(mtd, -1);
-			return 1;	
+			return 1;
 		}
-		
-		/* Calculate the address shift from the page size */	
+
+		/* Calculate the address shift from the page size */
 		this->page_shift = ffs(mtd->oobblock) - 1;
 		this->bbt_erase_shift = this->phys_erase_shift = ffs(mtd->erasesize) - 1;
 		this->chip_shift = ffs(this->chipsize) - 1;
 
 		/* Set the bad block position */
-		this->badblockpos = mtd->oobblock > 512 ? 
+		this->badblockpos = mtd->oobblock > 512 ?
 			NAND_LARGE_BADBLOCK_POS : NAND_SMALL_BADBLOCK_POS;
 
 		/* Get chip options, preserve non chip based options */
@@ -2346,10 +2344,10 @@ int nand_scan (struct mtd_info *mtd, int maxchips)
 		this->options |= NAND_NO_AUTOINCR;
 		/* Check if this is a not a samsung device. Do not clear the options
 		 * for chips which are not having an extended id.
-		 */	
+		 */
 		if (nand_maf_id != NAND_MFR_SAMSUNG && !nand_flash_ids[i].pagesize)
 			this->options &= ~NAND_SAMSUNG_LP_OPTIONS;
-		
+
 		/* Check for AND chips with 4 page planes */
 		if (this->options & NAND_4PAGE_ARRAY)
 			this->erase_cmd = multi_erase_cmd;
@@ -2359,14 +2357,14 @@ int nand_scan (struct mtd_info *mtd, int maxchips)
 		/* Do not replace user supplied command function ! */
 		if (mtd->oobblock > 512 && this->cmdfunc == nand_command)
 			this->cmdfunc = nand_command_lp;
-				
+
 		/* Try to identify manufacturer */
 		for (j = 0; nand_manuf_ids[j].id != 0x0; j++) {
 			if (nand_manuf_ids[j].id == nand_maf_id)
 				break;
 		}
 		printk (KERN_INFO "NAND device: Manufacturer ID:"
-			" 0x%02x, Chip ID: 0x%02x (%s %s)\n", nand_maf_id, nand_dev_id, 
+			" 0x%02x, Chip ID: 0x%02x (%s %s)\n", nand_maf_id, nand_dev_id,
 			nand_manuf_ids[j].name , nand_flash_ids[i].name);
 		break;
 	}
@@ -2390,7 +2388,7 @@ int nand_scan (struct mtd_info *mtd, int maxchips)
 	}
 	if (i > 1)
 		printk(KERN_INFO "%d NAND chips detected\n", i);
-	
+
 	/* Allocate buffers, if neccecary */
 	if (!this->oob_buf) {
 		size_t len;
@@ -2402,7 +2400,7 @@ int nand_scan (struct mtd_info *mtd, int maxchips)
 		}
 		this->options |= NAND_OOBBUF_ALLOC;
 	}
-	
+
 	if (!this->data_buf) {
 		size_t len;
 		len = mtd->oobblock + mtd->oobsize;
@@ -2429,7 +2427,7 @@ int nand_scan (struct mtd_info *mtd, int maxchips)
 	if (!this->autooob) {
 		/* Select the appropriate default oob placement scheme for
 		 * placement agnostic filesystems */
-		switch (mtd->oobsize) { 
+		switch (mtd->oobsize) {
 		case 8:
 			this->autooob = &nand_oob_8;
 			break;
@@ -2445,7 +2443,7 @@ int nand_scan (struct mtd_info *mtd, int maxchips)
 /*			BUG(); */
 		}
 	}
-	
+
 	/* The number of bytes available for the filesystem to place fs dependend
 	 * oob data */
 	if (this->options & NAND_BUSWIDTH_16) {
@@ -2455,12 +2453,12 @@ int nand_scan (struct mtd_info *mtd, int maxchips)
 	} else
 		mtd->oobavail = mtd->oobsize - (this->autooob->eccbytes + 1);
 
-	/* 
+	/*
 	 * check ECC mode, default to software
 	 * if 3byte/512byte hardware ECC is selected and we have 256 byte pagesize
-	 * fallback to software ECC 
+	 * fallback to software ECC
 	*/
-	this->eccsize = 256;	/* set default eccsize */	
+	this->eccsize = 256;	/* set default eccsize */
 	this->eccbytes = 3;
 
 	switch (this->eccmode) {
@@ -2475,27 +2473,27 @@ int nand_scan (struct mtd_info *mtd, int maxchips)
 			this->eccsize = 2048;
 		break;
 
-	case NAND_ECC_HW3_512: 
-	case NAND_ECC_HW6_512: 
-	case NAND_ECC_HW8_512: 
+	case NAND_ECC_HW3_512:
+	case NAND_ECC_HW6_512:
+	case NAND_ECC_HW8_512:
 		if (mtd->oobblock == 256) {
 			printk (KERN_WARNING "512 byte HW ECC not possible on 256 Byte pagesize, fallback to SW ECC \n");
 			this->eccmode = NAND_ECC_SOFT;
 			this->calculate_ecc = nand_calculate_ecc;
 			this->correct_data = nand_correct_data;
-		} else 
+		} else
 			this->eccsize = 512; /* set eccsize to 512 */
 		break;
-			
+
 	case NAND_ECC_HW3_256:
 		break;
-		
-	case NAND_ECC_NONE: 
+
+	case NAND_ECC_NONE:
 		printk (KERN_WARNING "NAND_ECC_NONE selected by board driver. This is not recommended !!\n");
 		this->eccmode = NAND_ECC_NONE;
 		break;
 
-	case NAND_ECC_SOFT:	
+	case NAND_ECC_SOFT:
 		this->calculate_ecc = nand_calculate_ecc;
 		this->correct_data = nand_correct_data;
 		break;
@@ -2503,28 +2501,28 @@ int nand_scan (struct mtd_info *mtd, int maxchips)
 	default:
 		printk (KERN_WARNING "Invalid NAND_ECC_MODE %d\n", this->eccmode);
 /*		BUG(); */
-	}	
+	}
 
-	/* Check hardware ecc function availability and adjust number of ecc bytes per 
+	/* Check hardware ecc function availability and adjust number of ecc bytes per
 	 * calculation step
 	*/
 	switch (this->eccmode) {
 	case NAND_ECC_HW12_2048:
 		this->eccbytes += 4;
-	case NAND_ECC_HW8_512: 
+	case NAND_ECC_HW8_512:
 		this->eccbytes += 2;
-	case NAND_ECC_HW6_512: 
+	case NAND_ECC_HW6_512:
 		this->eccbytes += 3;
-	case NAND_ECC_HW3_512: 
+	case NAND_ECC_HW3_512:
 	case NAND_ECC_HW3_256:
 		if (this->calculate_ecc && this->correct_data && this->enable_hwecc)
 			break;
 		printk (KERN_WARNING "No ECC functions supplied, Hardware ECC not possible\n");
 /*		BUG();	*/
 	}
-		
+
 	mtd->eccsize = this->eccsize;
-	
+
 	/* Set the number of read / write steps for one page to ensure ECC generation */
 	switch (this->eccmode) {
 	case NAND_ECC_HW12_2048:
@@ -2536,17 +2534,17 @@ int nand_scan (struct mtd_info *mtd, int maxchips)
 		this->eccsteps = mtd->oobblock / 512;
 		break;
 	case NAND_ECC_HW3_256:
-	case NAND_ECC_SOFT:	
+	case NAND_ECC_SOFT:
 		this->eccsteps = mtd->oobblock / 256;
 		break;
-		
-	case NAND_ECC_NONE: 
+
+	case NAND_ECC_NONE:
 		this->eccsteps = 1;
 		break;
 	}
 
 /* XXX U-BOOT XXX */
-#if 0	
+#if 0
 	/* Initialize state, waitqueue and spinlock */
 	this->state = FL_READY;
 	init_waitqueue_head (&this->wq);
@@ -2600,9 +2598,9 @@ int nand_scan (struct mtd_info *mtd, int maxchips)
 }
 
 /**
- * nand_release - [NAND Interface] Free resources held by the NAND device 
+ * nand_release - [NAND Interface] Free resources held by the NAND device
  * @mtd:	MTD device structure
-*/
+ */
 void nand_release (struct mtd_info *mtd)
 {
 	struct nand_chip *this = mtd->priv;
diff --git a/drivers/nand/nand_bbt.c b/drivers/nand/nand_bbt.c
index 6f7e05b..dfa88a3 100644
--- a/drivers/nand/nand_bbt.c
+++ b/drivers/nand/nand_bbt.c
@@ -3,7 +3,7 @@
  *
  *  Overview:
  *   Bad block table support for the NAND driver
- *   
+ *
  *  Copyright (C) 2004 Thomas Gleixner (tglx@linutronix.de)
  *
  * $Id: nand_bbt.c,v 1.28 2004/11/13 10:19:09 gleixner Exp $
@@ -14,23 +14,23 @@
  *
  * Description:
  *
- * When nand_scan_bbt is called, then it tries to find the bad block table 
- * depending on the options in the bbt descriptor(s). If a bbt is found 
- * then the contents are read and the memory based bbt is created. If a 
+ * When nand_scan_bbt is called, then it tries to find the bad block table
+ * depending on the options in the bbt descriptor(s). If a bbt is found
+ * then the contents are read and the memory based bbt is created. If a
  * mirrored bbt is selected then the mirror is searched too and the
- * versions are compared. If the mirror has a greater version number 
+ * versions are compared. If the mirror has a greater version number
  * than the mirror bbt is used to build the memory based bbt.
  * If the tables are not versioned, then we "or" the bad block information.
- * If one of the bbt's is out of date or does not exist it is (re)created. 
- * If no bbt exists at all then the device is scanned for factory marked 
- * good / bad blocks and the bad block tables are created. 
+ * If one of the bbt's is out of date or does not exist it is (re)created.
+ * If no bbt exists at all then the device is scanned for factory marked
+ * good / bad blocks and the bad block tables are created.
  *
- * For manufacturer created bbts like the one found on M-SYS DOC devices 
+ * For manufacturer created bbts like the one found on M-SYS DOC devices
  * the bbt is searched and read but never created
  *
- * The autogenerated bad block table is located in the last good blocks 
- * of the device. The table is mirrored, so it can be updated eventually. 
- * The table is marked in the oob area with an ident pattern and a version 
+ * The autogenerated bad block table is located in the last good blocks
+ * of the device. The table is mirrored, so it can be updated eventually.
+ * The table is marked in the oob area with an ident pattern and a version
  * number which indicates which of both tables is more up to date.
  *
  * The table uses 2 bits per block
@@ -43,13 +43,13 @@
  * 01b:		block is marked bad due to wear
  * 10b:		block is reserved (to protect the bbt area)
  * 11b:		block is factory marked bad
- * 
+ *
  * Multichip devices like DOC store the bad block info per floor.
  *
  * Following assumptions are made:
  * - bbts start at a page boundary, if autolocated on a block boundary
  * - the space neccecary for a bbt in FLASH does not exceed a block boundary
- * 
+ *
  */
 
 #include <common.h>
@@ -63,7 +63,7 @@
 
 #include <asm/errno.h>
 
-/** 
+/**
  * check_pattern - [GENERIC] check if a pattern is in the buffer
  * @buf:	the buffer to search
  * @len:	the length of buffer to search
@@ -87,9 +87,9 @@ static int check_pattern (uint8_t *buf, int len, int paglen, struct nand_bbt_des
 			if (p[i] != 0xff)
 				return -1;
 		}
-	}	
+	}
 	p += end;
-	
+
 	/* Compare the pattern */
 	for (i = 0; i < td->len; i++) {
 		if (p[i] != td->pattern[i])
@@ -120,7 +120,7 @@ static int check_pattern (uint8_t *buf, int len, int paglen, struct nand_bbt_des
  * Read the bad block table starting from page.
  *
  */
-static int read_bbt (struct mtd_info *mtd, uint8_t *buf, int page, int num, 
+static int read_bbt (struct mtd_info *mtd, uint8_t *buf, int page, int num,
 	int bits, int offs, int reserved_block_code)
 {
 	int res, i, j, act = 0;
@@ -131,7 +131,7 @@ static int read_bbt (struct mtd_info *mtd, uint8_t *buf, int page, int num,
 
 	totlen = (num * bits) >> 3;
 	from = ((loff_t)page) << this->page_shift;
-	
+
 	while (totlen) {
 		len = min (totlen, (size_t) (1 << this->bbt_erase_shift));
 		res = mtd->read_ecc (mtd, from, len, &retlen, buf, NULL, this->autooob);
@@ -141,7 +141,7 @@ static int read_bbt (struct mtd_info *mtd, uint8_t *buf, int page, int num,
 				return res;
 			}
 			printk (KERN_WARNING "nand_bbt: ECC error while reading bad block table\n");
-		}	
+		}
 
 		/* Analyse data */
 		for (i = 0; i < len; i++) {
@@ -161,12 +161,12 @@ static int read_bbt (struct mtd_info *mtd, uint8_t *buf, int page, int num,
 				 * message to MTD_DEBUG_LEVEL0 */
 				printk (KERN_DEBUG "nand_read_bbt: Bad block at 0x%08x\n",
 					((offs << 2) + (act >> 1)) << this->bbt_erase_shift);
-				/* Factory marked bad or worn out ? */	
+				/* Factory marked bad or worn out ? */
 				if (tmp == 0)
 					this->bbt[offs + (act >> 3)] |= 0x3 << (act & 0x06);
 				else
 					this->bbt[offs + (act >> 3)] |= 0x1 << (act & 0x06);
-			}	
+			}
 		}
 		totlen -= len;
 		from += len;
@@ -178,7 +178,7 @@ static int read_bbt (struct mtd_info *mtd, uint8_t *buf, int page, int num,
  * read_abs_bbt - [GENERIC] Read the bad block table starting at a given page
  * @mtd:	MTD device structure
  * @buf:	temporary buffer
- * @td:		descriptor for the bad block table 
+ * @td:		descriptor for the bad block table
  * @chip:	read the table for a specific chip, -1 read all chips.
  *		Applies only if NAND_BBT_PERCHIP option is set
  *
@@ -213,7 +213,7 @@ static int read_abs_bbt (struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_des
  * read_abs_bbts - [GENERIC] Read the bad block table(s) for all chips starting at a given page
  * @mtd:	MTD device structure
  * @buf:	temporary buffer
- * @td:		descriptor for the bad block table 
+ * @td:		descriptor for the bad block table
  * @md:		descriptor for the bad block table mirror
  *
  * Read the bad block table(s) for all chips starting at a given page
@@ -225,16 +225,16 @@ static int read_abs_bbts (struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_de
 {
 	struct nand_chip *this = mtd->priv;
 
-	/* Read the primary version, if available */	
+	/* Read the primary version, if available */
 	if (td->options & NAND_BBT_VERSION) {
-		nand_read_raw (mtd, buf, td->pages[0] << this->page_shift, mtd->oobblock, mtd->oobsize); 
+		nand_read_raw (mtd, buf, td->pages[0] << this->page_shift, mtd->oobblock, mtd->oobsize);
 		td->version[0] = buf[mtd->oobblock + td->veroffs];
 		printk (KERN_DEBUG "Bad block table at page %d, version 0x%02X\n", td->pages[0], td->version[0]);
 	}
 
-	/* Read the mirror version, if available */	
+	/* Read the mirror version, if available */
 	if (md && (md->options & NAND_BBT_VERSION)) {
-		nand_read_raw (mtd, buf, md->pages[0] << this->page_shift, mtd->oobblock, mtd->oobsize); 
+		nand_read_raw (mtd, buf, md->pages[0] << this->page_shift, mtd->oobblock, mtd->oobsize);
 		md->version[0] = buf[mtd->oobblock + md->veroffs];
 		printk (KERN_DEBUG "Bad block table at page %d, version 0x%02X\n", md->pages[0], md->version[0]);
 	}
@@ -268,7 +268,7 @@ static void create_bbt (struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_desc
 	else {
 		if (bd->options & NAND_BBT_SCAN2NDPAGE)
 			len = 2;
-		else	
+		else
 			len = 1;
 	}
 	scanlen	= mtd->oobblock + mtd->oobsize;
@@ -285,20 +285,20 @@ static void create_bbt (struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_desc
 		if (chip >= this->numchips) {
 			printk (KERN_WARNING "create_bbt(): chipnr (%d) > available chips (%d)\n",
 				chip + 1, this->numchips);
-			return;	
+			return;
 		}
 		numblocks = this->chipsize >> (this->bbt_erase_shift - 1);
 		startblock = chip * numblocks;
 		numblocks += startblock;
 		from = startblock << (this->bbt_erase_shift - 1);
 	}
-	
+
 	for (i = startblock; i < numblocks;) {
 		nand_read_raw (mtd, buf, from, readlen, ooblen);
 		for (j = 0; j < len; j++) {
 			if (check_pattern (&buf[j * scanlen], scanlen, mtd->oobblock, bd)) {
 				this->bbt[i >> 3] |= 0x03 << (i & 0x6);
-				printk (KERN_WARNING "Bad eraseblock %d at 0x%08x\n", 
+				printk (KERN_WARNING "Bad eraseblock %d at 0x%08x\n",
 					i >> 1, (unsigned int) from);
 				break;
 			}
@@ -315,15 +315,15 @@ static void create_bbt (struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_desc
  * @td:		descriptor for the bad block table
  *
  * Read the bad block table by searching for a given ident pattern.
- * Search is preformed either from the beginning up or from the end of 
+ * Search is preformed either from the beginning up or from the end of
  * the device downwards. The search starts always at the start of a
  * block.
- * If the option NAND_BBT_PERCHIP is given, each chip is searched 
+ * If the option NAND_BBT_PERCHIP is given, each chip is searched
  * for a bbt, which contains the bad block information of this chip.
  * This is neccecary to provide support for certain DOC devices.
  *
- * The bbt ident pattern resides in the oob area of the first page 
- * in a block. 
+ * The bbt ident pattern resides in the oob area of the first page
+ * in a block.
  */
 static int search_bbt (struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_descr *td)
 {
@@ -338,10 +338,10 @@ static int search_bbt (struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_descr
 		startblock = (mtd->size >> this->bbt_erase_shift) -1;
 		dir = -1;
 	} else {
-		startblock = 0;	
+		startblock = 0;
 		dir = 1;
-	}	
-	
+	}
+
 	/* Do we have a bbt per chip ? */
 	if (td->options & NAND_BBT_PERCHIP) {
 		chips = this->numchips;
@@ -351,19 +351,19 @@ static int search_bbt (struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_descr
 		chips = 1;
 		bbtblocks = mtd->size >> this->bbt_erase_shift;
 	}
-	
+
 	/* Number of bits for each erase block in the bbt */
 	bits = td->options & NAND_BBT_NRBITS_MSK;
-	
+
 	for (i = 0; i < chips; i++) {
 		/* Reset version information */
-		td->version[i] = 0;	
+		td->version[i] = 0;
 		td->pages[i] = -1;
 		/* Scan the maximum number of blocks */
 		for (block = 0; block < td->maxblocks; block++) {
 			int actblock = startblock + dir * block;
 			/* Read first page */
-			nand_read_raw (mtd, buf, actblock << this->bbt_erase_shift, mtd->oobblock, mtd->oobsize); 
+			nand_read_raw (mtd, buf, actblock << this->bbt_erase_shift, mtd->oobblock, mtd->oobsize);
 			if (!check_pattern(buf, scanlen, mtd->oobblock, td)) {
 				td->pages[i] = actblock << (this->bbt_erase_shift - this->page_shift);
 				if (td->options & NAND_BBT_VERSION) {
@@ -381,46 +381,46 @@ static int search_bbt (struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_descr
 		else
 			printk (KERN_DEBUG "Bad block table found at page %d, version 0x%02X\n", td->pages[i], td->version[i]);
 	}
-	return 0;	
+	return 0;
 }
 
 /**
  * search_read_bbts - [GENERIC] scan the device for bad block table(s)
  * @mtd:	MTD device structure
  * @buf:	temporary buffer
- * @td:		descriptor for the bad block table 
+ * @td:		descriptor for the bad block table
  * @md:		descriptor for the bad block table mirror
  *
  * Search and read the bad block table(s)
 */
-static int search_read_bbts (struct mtd_info *mtd, uint8_t *buf, 
+static int search_read_bbts (struct mtd_info *mtd, uint8_t *buf,
 	struct nand_bbt_descr *td, struct nand_bbt_descr *md)
 {
 	/* Search the primary table */
 	search_bbt (mtd, buf, td);
-		
+
 	/* Search the mirror table */
 	if (md)
 		search_bbt (mtd, buf, md);
-	
+
 	/* Force result check */
-	return 1;	
+	return 1;
 }
-	
 
-/** 
+
+/**
  * write_bbt - [GENERIC] (Re)write the bad block table
  *
  * @mtd:	MTD device structure
  * @buf:	temporary buffer
- * @td:		descriptor for the bad block table 
+ * @td:		descriptor for the bad block table
  * @md:		descriptor for the bad block table mirror
  * @chipsel:	selector for a specific chip, -1 for all
  *
  * (Re)write the bad block table
  *
 */
-static int write_bbt (struct mtd_info *mtd, uint8_t *buf, 
+static int write_bbt (struct mtd_info *mtd, uint8_t *buf,
 	struct nand_bbt_descr *td, struct nand_bbt_descr *md, int chipsel)
 {
 	struct nand_chip *this = mtd->priv;
@@ -439,7 +439,7 @@ static int write_bbt (struct mtd_info *mtd, uint8_t *buf,
 	/* Write bad block table per chip rather than per device ? */
 	if (td->options & NAND_BBT_PERCHIP) {
 		numblocks = (int) (this->chipsize >> this->bbt_erase_shift);
-		/* Full device write or specific chip ? */	
+		/* Full device write or specific chip ? */
 		if (chipsel == -1) {
 			nrchips = this->numchips;
 		} else {
@@ -449,19 +449,19 @@ static int write_bbt (struct mtd_info *mtd, uint8_t *buf,
 	} else {
 		numblocks = (int) (mtd->size >> this->bbt_erase_shift);
 		nrchips = 1;
-	}	
-	
+	}
+
 	/* Loop through the chips */
 	for (; chip < nrchips; chip++) {
-		
-		/* There was already a version of the table, reuse the page 
-		 * This applies for absolute placement too, as we have the 
+
+		/* There was already a version of the table, reuse the page
+		 * This applies for absolute placement too, as we have the
 		 * page nr. in td->pages.
 		 */
 		if (td->pages[chip] != -1) {
 			page = td->pages[chip];
 			goto write;
-		}	
+		}
 
 		/* Automatic placement of the bad block table */
 		/* Search direction top -> down ? */
@@ -471,7 +471,7 @@ static int write_bbt (struct mtd_info *mtd, uint8_t *buf,
 		} else {
 			startblock = chip * numblocks;
 			dir = 1;
-		}	
+		}
 
 		for (i = 0; i < td->maxblocks; i++) {
 			int block = startblock + dir * i;
@@ -488,7 +488,7 @@ static int write_bbt (struct mtd_info *mtd, uint8_t *buf,
 		}
 		printk (KERN_ERR "No space left to write bad block table\n");
 		return -ENOSPC;
-write:	
+write:
 
 		/* Set up shift count and masks for the flash table */
 		bits = td->options & NAND_BBT_NRBITS_MSK;
@@ -499,14 +499,14 @@ write:
 		case 8: sft = 0; sftmsk = 0x00; msk[0] = 0x00; msk[1] = 0x0F; msk[2] = ~rcode; msk[3] = 0xff; break;
 		default: return -EINVAL;
 		}
-		
+
 		bbtoffs = chip * (numblocks >> 2);
-		
+
 		to = ((loff_t) page) << this->page_shift;
 
 		memcpy (&oobinfo, this->autooob, sizeof(oobinfo));
 		oobinfo.useecc = MTD_NANDECC_PLACEONLY;
-		
+
 		/* Must we save the block contents ? */
 		if (td->options & NAND_BBT_SAVECONTENT) {
 			/* Make it block aligned */
@@ -545,7 +545,7 @@ write:
 				buf[len + td->veroffs] = td->version[chip];
 			}
 		}
-	
+
 		/* walk through the memory table */
 		for (i = 0; i < numblocks; ) {
 			uint8_t dat;
@@ -557,7 +557,7 @@ write:
 				dat >>= 2;
 			}
 		}
-		
+
 		memset (&einfo, 0, sizeof (einfo));
 		einfo.mtd = mtd;
 		einfo.addr = (unsigned long) to;
@@ -567,18 +567,18 @@ write:
 			printk (KERN_WARNING "nand_bbt: Error during block erase: %d\n", res);
 			return res;
 		}
-	
+
 		res = mtd->write_ecc (mtd, to, len, &retlen, buf, &buf[len], &oobinfo);
 		if (res < 0) {
 			printk (KERN_WARNING "nand_bbt: Error while writing bad block table %d\n", res);
 			return res;
 		}
-		printk (KERN_DEBUG "Bad block table written to 0x%08x, version 0x%02X\n", 
+		printk (KERN_DEBUG "Bad block table written to 0x%08x, version 0x%02X\n",
 			(unsigned int) to, td->version[chip]);
-	
+
 		/* Mark it as used */
 		td->pages[chip] = page;
-	}	
+	}
 	return 0;
 }
 
@@ -587,7 +587,7 @@ write:
  * @mtd:	MTD device structure
  * @bd:		descriptor for the good/bad block search pattern
  *
- * The function creates a memory based bbt by scanning the device 
+ * The function creates a memory based bbt by scanning the device
  * for manufacturer / software marked good / bad blocks
 */
 static int nand_memory_bbt (struct mtd_info *mtd, struct nand_bbt_descr *bd)
@@ -621,11 +621,11 @@ static int check_create (struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_des
 	struct nand_bbt_descr *rd, *rd2;
 
 	/* Do we have a bbt per chip ? */
-	if (td->options & NAND_BBT_PERCHIP) 
+	if (td->options & NAND_BBT_PERCHIP)
 		chips = this->numchips;
-	else 
+	else
 		chips = 1;
-	
+
 	for (i = 0; i < chips; i++) {
 		writeops = 0;
 		rd = NULL;
@@ -640,7 +640,7 @@ static int check_create (struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_des
 			}
 
 			if (td->pages[i] == -1) {
-				rd = md;				
+				rd = md;
 				td->version[i] = md->version[i];
 				writeops = 1;
 				goto writecheck;
@@ -658,7 +658,7 @@ static int check_create (struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_des
 				if (!(td->options & NAND_BBT_VERSION))
 					rd2 = md;
 				goto writecheck;
-			}	
+			}
 
 			if (((int8_t) (td->version[i] - md->version[i])) > 0) {
 				rd = td;
@@ -683,15 +683,15 @@ static int check_create (struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_des
 create:
 		/* Create the bad block table by scanning the device ? */
 		if (!(td->options & NAND_BBT_CREATE))
-			continue;	
-		
+			continue;
+
 		/* Create the table in memory by scanning the chip(s) */
 		create_bbt (mtd, buf, bd, chipsel);
-		
+
 		td->version[i] = 1;
 		if (md)
-			md->version[i] = 1;	
-writecheck:	
+			md->version[i] = 1;
+writecheck:
 		/* read back first ? */
 		if (rd)
 			read_abs_bbt (mtd, buf, rd, chipsel);
@@ -705,7 +705,7 @@ writecheck:
 			if (res < 0)
 				return res;
 		}
-		
+
 		/* Write the mirror bad block table to the device ? */
 		if ((writeops & 0x02) && md && (md->options & NAND_BBT_WRITE)) {
 			res = write_bbt (mtd, buf, md, td, chipsel);
@@ -713,11 +713,11 @@ writecheck:
 				return res;
 		}
 	}
-	return 0;	
+	return 0;
 }
 
 /**
- * mark_bbt_regions - [GENERIC] mark the bad block table regions 
+ * mark_bbt_regions - [GENERIC] mark the bad block table regions
  * @mtd:	MTD device structure
  * @td:		bad block table descriptor
  *
@@ -738,14 +738,14 @@ static void mark_bbt_region (struct mtd_info *mtd, struct nand_bbt_descr *td)
 	} else {
 		chips = 1;
 		nrblocks = (int)(mtd->size >> this->bbt_erase_shift);
-	}	
-	
+	}
+
 	for (i = 0; i < chips; i++) {
 		if ((td->options & NAND_BBT_ABSPAGE) ||
 		    !(td->options & NAND_BBT_WRITE)) {
 		    	if (td->pages[i] == -1) continue;
 			block = td->pages[i] >> (this->bbt_erase_shift - this->page_shift);
-			block <<= 1;		
+			block <<= 1;
 			oldval = this->bbt[(block >> 3)];
 			newval = oldval | (0x2 << (block & 0x06));
 			this->bbt[(block >> 3)] = newval;
@@ -756,16 +756,16 @@ static void mark_bbt_region (struct mtd_info *mtd, struct nand_bbt_descr *td)
 		update = 0;
 		if (td->options & NAND_BBT_LASTBLOCK)
 			block = ((i + 1) * nrblocks) - td->maxblocks;
-		else	
+		else
 			block = i * nrblocks;
-		block <<= 1;	
+		block <<= 1;
 		for (j = 0; j < td->maxblocks; j++) {
 			oldval = this->bbt[(block >> 3)];
 			newval = oldval | (0x2 << (block & 0x06));
 			this->bbt[(block >> 3)] = newval;
 			if (oldval != newval) update = 1;
 			block += 2;
-		}	
+		}
 		/* If we want reserved blocks to be recorded to flash, and some
 		   new ones have been marked, then we need to update the stored
 		   bbts.  This should only happen once. */
@@ -779,7 +779,7 @@ static void mark_bbt_region (struct mtd_info *mtd, struct nand_bbt_descr *td)
  * @mtd:	MTD device structure
  * @bd:		descriptor for the good/bad block search pattern
  *
- * The function checks, if a bad block table(s) is/are already 
+ * The function checks, if a bad block table(s) is/are already
  * available. If not it scans the device for manufacturer
  * marked good / bad blocks and writes the bad block table(s) to
  * the selected place.
@@ -822,30 +822,30 @@ int nand_scan_bbt (struct mtd_info *mtd, struct nand_bbt_descr *bd)
 		this->bbt = NULL;
 		return -ENOMEM;
 	}
-	
+
 	/* Is the bbt at a given page ? */
 	if (td->options & NAND_BBT_ABSPAGE) {
 		res = read_abs_bbts (mtd, buf, td, md);
-	} else {	
+	} else {
 		/* Search the bad block table using a pattern in oob */
 		res = search_read_bbts (mtd, buf, td, md);
-	}	
+	}
 
-	if (res) 
+	if (res)
 		res = check_create (mtd, buf, bd);
-	
+
 	/* Prevent the bbt regions from erasing / writing */
 	mark_bbt_region (mtd, td);
 	if (md)
 		mark_bbt_region (mtd, md);
-	
+
 	kfree (buf);
 	return res;
 }
 
 
 /**
- * nand_update_bbt - [NAND Interface] update bad block table(s) 
+ * nand_update_bbt - [NAND Interface] update bad block table(s)
  * @mtd:	MTD device structure
  * @offs:	the offset of the newly marked block
  *
@@ -872,7 +872,7 @@ int nand_update_bbt (struct mtd_info *mtd, loff_t offs)
 		printk (KERN_ERR "nand_update_bbt: Out of memory\n");
 		return -ENOMEM;
 	}
-	
+
 	writeops = md != NULL ? 0x03 : 0x01;
 
 	/* Do we have a bbt per chip ? */
@@ -886,7 +886,7 @@ int nand_update_bbt (struct mtd_info *mtd, loff_t offs)
 
 	td->version[chip]++;
 	if (md)
-		md->version[chip]++;	
+		md->version[chip]++;
 
 	/* Write the bad block table to the device ? */
 	if ((writeops & 0x01) && (td->options & NAND_BBT_WRITE)) {
@@ -899,15 +899,15 @@ int nand_update_bbt (struct mtd_info *mtd, loff_t offs)
 		res = write_bbt (mtd, buf, md, td, chipsel);
 	}
 
-out:	
+out:
 	kfree (buf);
 	return res;
 }
 
-/* Define some generic bad / good block scan pattern which are used 
+/* Define some generic bad / good block scan pattern which are used
  * while scanning a device for factory marked good / bad blocks
- * 
- * The memory based patterns just 
+ *
+ * The memory based patterns just
  */
 static uint8_t scan_ff_pattern[] = { 0xff, 0xff };
 
@@ -954,7 +954,7 @@ static uint8_t bbt_pattern[] = {'B', 'b', 't', '0' };
 static uint8_t mirror_pattern[] = {'1', 't', 'b', 'B' };
 
 static struct nand_bbt_descr bbt_main_descr = {
-	.options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE 
+	.options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE
 		| NAND_BBT_2BIT | NAND_BBT_VERSION | NAND_BBT_PERCHIP,
 	.offs =	8,
 	.len = 4,
@@ -964,7 +964,7 @@ static struct nand_bbt_descr bbt_main_descr = {
 };
 
 static struct nand_bbt_descr bbt_mirror_descr = {
-	.options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE 
+	.options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE
 		| NAND_BBT_2BIT | NAND_BBT_VERSION | NAND_BBT_PERCHIP,
 	.offs =	8,
 	.len = 4,
@@ -974,7 +974,7 @@ static struct nand_bbt_descr bbt_mirror_descr = {
 };
 
 /**
- * nand_default_bbt - [NAND Interface] Select a default bad block table for the device 
+ * nand_default_bbt - [NAND Interface] Select a default bad block table for the device
  * @mtd:	MTD device structure
  *
  * This function selects the default bad block table
@@ -984,29 +984,29 @@ static struct nand_bbt_descr bbt_mirror_descr = {
 int nand_default_bbt (struct mtd_info *mtd)
 {
 	struct nand_chip *this = mtd->priv;
-	
-	/* Default for AG-AND. We must use a flash based 
+
+	/* Default for AG-AND. We must use a flash based
 	 * bad block table as the devices have factory marked
 	 * _good_ blocks. Erasing those blocks leads to loss
 	 * of the good / bad information, so we _must_ store
-	 * this information in a good / bad table during 
+	 * this information in a good / bad table during
 	 * startup
 	*/
 	if (this->options & NAND_IS_AND) {
 		/* Use the default pattern descriptors */
-		if (!this->bbt_td) {	
+		if (!this->bbt_td) {
 			this->bbt_td = &bbt_main_descr;
 			this->bbt_md = &bbt_mirror_descr;
-		}	
+		}
 		this->options |= NAND_USE_FLASH_BBT;
 		return nand_scan_bbt (mtd, &agand_flashbased);
 	}
-	
-	
+
+
 	/* Is a flash based bad block table requested ? */
 	if (this->options & NAND_USE_FLASH_BBT) {
-		/* Use the default pattern descriptors */	
-		if (!this->bbt_td) {	
+		/* Use the default pattern descriptors */
+		if (!this->bbt_td) {
 			this->bbt_td = &bbt_main_descr;
 			this->bbt_md = &bbt_mirror_descr;
 		}
@@ -1026,23 +1026,23 @@ int nand_default_bbt (struct mtd_info *mtd)
 }
 
 /**
- * nand_isbad_bbt - [NAND Interface] Check if a block is bad 
+ * nand_isbad_bbt - [NAND Interface] Check if a block is bad
  * @mtd:	MTD device structure
  * @offs:	offset in the device
  * @allowbbt:	allow access to bad block table region
  *
-*/
+ */
 int nand_isbad_bbt (struct mtd_info *mtd, loff_t offs, int allowbbt)
 {
 	struct nand_chip *this = mtd->priv;
 	int block;
 	uint8_t	res;
-	
+
 	/* Get block number * 2 */
 	block = (int) (offs >> (this->bbt_erase_shift - 1));
 	res = (this->bbt[block >> 3] >> (block & 0x06)) & 0x03;
 
-	DEBUG (MTD_DEBUG_LEVEL2, "nand_isbad_bbt(): bbt info for offs 0x%08x: (block %d) 0x%02x\n", 
+	DEBUG (MTD_DEBUG_LEVEL2, "nand_isbad_bbt(): bbt info for offs 0x%08x: (block %d) 0x%02x\n",
 		(unsigned int)offs, res, block >> 1);
 
 	switch ((int)res) {
diff --git a/drivers/nand/nand_ecc.c b/drivers/nand/nand_ecc.c
index dc9db4b..6e11c22 100644
--- a/drivers/nand/nand_ecc.c
+++ b/drivers/nand/nand_ecc.c
@@ -13,16 +13,16 @@
  * under the terms of the GNU General Public License as published by the
  * Free Software Foundation; either version 2 or (at your option) any
  * later version.
- * 
+ *
  * This file is distributed in the hope that it will be useful, but WITHOUT
  * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
  * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
  * for more details.
- * 
+ *
  * You should have received a copy of the GNU General Public License along
  * with this file; if not, write to the Free Software Foundation, Inc.,
  * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
- * 
+ *
  * As a special exception, if other files instantiate templates or use
  * macros or inline functions from these files, or you compile these
  * files and link them with other works to produce a work based on these
@@ -30,7 +30,7 @@
  * covered by the GNU General Public License. However the source code for
  * these files must still be made available in accordance with section (3)
  * of the GNU General Public License.
- * 
+ *
  * This exception does not invalidate any other reasons why a work based on
  * this file might be covered by the GNU General Public License.
  */
@@ -66,7 +66,7 @@ static const u_char nand_ecc_precalc_table[] = {
  * nand_trans_result - [GENERIC] create non-inverted ECC
  * @reg2:	line parity reg 2
  * @reg3:	line parity reg 3
- * @ecc_code:	ecc 
+ * @ecc_code:	ecc
  *
  * Creates non-inverted ECC code from line parity
  */
@@ -74,11 +74,11 @@ static void nand_trans_result(u_char reg2, u_char reg3,
 	u_char *ecc_code)
 {
 	u_char a, b, i, tmp1, tmp2;
-	
+
 	/* Initialize variables */
 	a = b = 0x80;
 	tmp1 = tmp2 = 0;
-	
+
 	/* Calculate first ECC byte */
 	for (i = 0; i < 4; i++) {
 		if (reg3 & a)		/* LP15,13,11,9 --> ecc_code[0] */
@@ -89,7 +89,7 @@ static void nand_trans_result(u_char reg2, u_char reg3,
 		b >>= 1;
 		a >>= 1;
 	}
-	
+
 	/* Calculate second ECC byte */
 	b = 0x80;
 	for (i = 0; i < 4; i++) {
@@ -101,7 +101,7 @@ static void nand_trans_result(u_char reg2, u_char reg3,
 		b >>= 1;
 		a >>= 1;
 	}
-	
+
 	/* Store two of the ECC bytes */
 	ecc_code[0] = tmp1;
 	ecc_code[1] = tmp2;
@@ -117,28 +117,28 @@ int nand_calculate_ecc(struct mtd_info *mtd, const u_char *dat, u_char *ecc_code
 {
 	u_char idx, reg1, reg2, reg3;
 	int j;
-	
+
 	/* Initialize variables */
 	reg1 = reg2 = reg3 = 0;
 	ecc_code[0] = ecc_code[1] = ecc_code[2] = 0;
-	
-	/* Build up column parity */ 
+
+	/* Build up column parity */
 	for(j = 0; j < 256; j++) {
-		
+
 		/* Get CP0 - CP5 from table */
 		idx = nand_ecc_precalc_table[dat[j]];
 		reg1 ^= (idx & 0x3f);
-		
+
 		/* All bit XOR = 1 ? */
 		if (idx & 0x40) {
 			reg3 ^= (u_char) j;
 			reg2 ^= ~((u_char) j);
 		}
 	}
-	
+
 	/* Create non-inverted ECC code from line parity */
 	nand_trans_result(reg2, reg3, ecc_code);
-	
+
 	/* Calculate final ECC code */
 	ecc_code[0] = ~ecc_code[0];
 	ecc_code[1] = ~ecc_code[1];
@@ -158,12 +158,12 @@ int nand_calculate_ecc(struct mtd_info *mtd, const u_char *dat, u_char *ecc_code
 int nand_correct_data(struct mtd_info *mtd, u_char *dat, u_char *read_ecc, u_char *calc_ecc)
 {
 	u_char a, b, c, d1, d2, d3, add, bit, i;
-	
-	/* Do error detection */ 
+
+	/* Do error detection */
 	d1 = calc_ecc[0] ^ read_ecc[0];
 	d2 = calc_ecc[1] ^ read_ecc[1];
 	d3 = calc_ecc[2] ^ read_ecc[2];
-	
+
 	if ((d1 | d2 | d3) == 0) {
 		/* No errors */
 		return 0;
@@ -172,7 +172,7 @@ int nand_correct_data(struct mtd_info *mtd, u_char *dat, u_char *read_ecc, u_cha
 		a = (d1 ^ (d1 >> 1)) & 0x55;
 		b = (d2 ^ (d2 >> 1)) & 0x55;
 		c = (d3 ^ (d3 >> 1)) & 0x54;
-		
+
 		/* Found and will correct single bit error in the data */
 		if ((a == 0x55) && (b == 0x55) && (c == 0x54)) {
 			c = 0x80;
@@ -205,8 +205,7 @@ int nand_correct_data(struct mtd_info *mtd, u_char *dat, u_char *read_ecc, u_cha
 			a ^= (b << bit);
 			dat[add] = a;
 			return 1;
-		}
-		else {
+		} else {
 			i = 0;
 			while (d1) {
 				if (d1 & 0x01)
@@ -236,7 +235,7 @@ int nand_correct_data(struct mtd_info *mtd, u_char *dat, u_char *read_ecc, u_cha
 			}
 		}
 	}
-	
+
 	/* Should never happen */
 	return -1;
 }
diff --git a/drivers/nand/nand_ids.c b/drivers/nand/nand_ids.c
index 5df1e89..39882cc 100644
--- a/drivers/nand/nand_ids.c
+++ b/drivers/nand/nand_ids.c
@@ -18,14 +18,14 @@
 
 /*
 *	Chip ID list
-*	
+*
 *	Name. ID code, pagesize, chipsize in MegaByte, eraseblock size,
 *	options
-* 
+*
 * 	Pagesize; 0, 256, 512
 *	0 	get this information from the extended chip ID
 +	256	256 Byte page size
-*	512	512 Byte page size	
+*	512	512 Byte page size
 */
 struct nand_flash_dev nand_flash_ids[] = {
 	{"NAND 1MiB 5V 8-bit", 		0x6e, 256, 1, 0x1000, 0},
@@ -38,36 +38,36 @@ struct nand_flash_dev nand_flash_ids[] = {
 	{"NAND 4MiB 3,3V 8-bit", 	0xe3, 512, 4, 0x2000, 0},
 	{"NAND 4MiB 3,3V 8-bit", 	0xe5, 512, 4, 0x2000, 0},
 	{"NAND 8MiB 3,3V 8-bit", 	0xd6, 512, 8, 0x2000, 0},
-	
+
 	{"NAND 8MiB 1,8V 8-bit", 	0x39, 512, 8, 0x2000, 0},
 	{"NAND 8MiB 3,3V 8-bit", 	0xe6, 512, 8, 0x2000, 0},
 	{"NAND 8MiB 1,8V 16-bit", 	0x49, 512, 8, 0x2000, NAND_BUSWIDTH_16},
 	{"NAND 8MiB 3,3V 16-bit", 	0x59, 512, 8, 0x2000, NAND_BUSWIDTH_16},
-	
+
 	{"NAND 16MiB 1,8V 8-bit", 	0x33, 512, 16, 0x4000, 0},
 	{"NAND 16MiB 3,3V 8-bit", 	0x73, 512, 16, 0x4000, 0},
 	{"NAND 16MiB 1,8V 16-bit", 	0x43, 512, 16, 0x4000, NAND_BUSWIDTH_16},
 	{"NAND 16MiB 3,3V 16-bit", 	0x53, 512, 16, 0x4000, NAND_BUSWIDTH_16},
-	
+
 	{"NAND 32MiB 1,8V 8-bit", 	0x35, 512, 32, 0x4000, 0},
 	{"NAND 32MiB 3,3V 8-bit", 	0x75, 512, 32, 0x4000, 0},
 	{"NAND 32MiB 1,8V 16-bit", 	0x45, 512, 32, 0x4000, NAND_BUSWIDTH_16},
 	{"NAND 32MiB 3,3V 16-bit", 	0x55, 512, 32, 0x4000, NAND_BUSWIDTH_16},
-	
+
 	{"NAND 64MiB 1,8V 8-bit", 	0x36, 512, 64, 0x4000, 0},
 	{"NAND 64MiB 3,3V 8-bit", 	0x76, 512, 64, 0x4000, 0},
 	{"NAND 64MiB 1,8V 16-bit", 	0x46, 512, 64, 0x4000, NAND_BUSWIDTH_16},
 	{"NAND 64MiB 3,3V 16-bit", 	0x56, 512, 64, 0x4000, NAND_BUSWIDTH_16},
-	
+
 	{"NAND 128MiB 1,8V 8-bit", 	0x78, 512, 128, 0x4000, 0},
 	{"NAND 128MiB 3,3V 8-bit", 	0x79, 512, 128, 0x4000, 0},
 	{"NAND 128MiB 1,8V 16-bit", 	0x72, 512, 128, 0x4000, NAND_BUSWIDTH_16},
 	{"NAND 128MiB 3,3V 16-bit", 	0x74, 512, 128, 0x4000, NAND_BUSWIDTH_16},
-	
+
 	{"NAND 256MiB 3,3V 8-bit", 	0x71, 512, 256, 0x4000, 0},
 
 	{"NAND 512MiB 3,3V 8-bit", 	0xDC, 512, 512, 0x4000, 0},
-	
+
 	/* These are the new chips with large page size. The pagesize
 	* and the erasesize is determined from the extended id bytes
 	*/
@@ -82,13 +82,13 @@ struct nand_flash_dev nand_flash_ids[] = {
 	{"NAND 256MiB 3,3V 8-bit", 	0xDA, 0, 256, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_NO_AUTOINCR},
 	{"NAND 256MiB 1,8V 16-bit", 	0xBA, 0, 256, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_BUSWIDTH_16 | NAND_NO_AUTOINCR},
 	{"NAND 256MiB 3,3V 16-bit", 	0xCA, 0, 256, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_BUSWIDTH_16 | NAND_NO_AUTOINCR},
-	
+
 	/* 4 Gigabit */
 	{"NAND 512MiB 1,8V 8-bit", 	0xAC, 0, 512, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_NO_AUTOINCR},
 	{"NAND 512MiB 3,3V 8-bit", 	0xDC, 0, 512, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_NO_AUTOINCR},
 	{"NAND 512MiB 1,8V 16-bit", 	0xBC, 0, 512, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_BUSWIDTH_16 | NAND_NO_AUTOINCR},
 	{"NAND 512MiB 3,3V 16-bit", 	0xCC, 0, 512, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_BUSWIDTH_16 | NAND_NO_AUTOINCR},
-	
+
 	/* 8 Gigabit */
 	{"NAND 1GiB 1,8V 8-bit", 	0xA3, 0, 1024, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_NO_AUTOINCR},
 	{"NAND 1GiB 3,3V 8-bit", 	0xD3, 0, 1024, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_NO_AUTOINCR},
@@ -101,11 +101,11 @@ struct nand_flash_dev nand_flash_ids[] = {
 	{"NAND 2GiB 1,8V 16-bit", 	0xB5, 0, 2048, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_BUSWIDTH_16 | NAND_NO_AUTOINCR},
 	{"NAND 2GiB 3,3V 16-bit", 	0xC5, 0, 2048, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_BUSWIDTH_16 | NAND_NO_AUTOINCR},
 
-	/* Renesas AND 1 Gigabit. Those chips do not support extended id and have a strange page/block layout ! 
+	/* Renesas AND 1 Gigabit. Those chips do not support extended id and have a strange page/block layout !
 	 * The chosen minimum erasesize is 4 * 2 * 2048 = 16384 Byte, as those chips have an array of 4 page planes
 	 * 1 block = 2 pages, but due to plane arrangement the blocks 0-3 consists of page 0 + 4,1 + 5, 2 + 6, 3 + 7
 	 * Anyway JFFS2 would increase the eraseblock size so we chose a combined one which can be erased in one go
-	 * There are more speed improvements for reads and writes possible, but not implemented now 
+	 * There are more speed improvements for reads and writes possible, but not implemented now
 	 */
 	{"AND 128MiB 3,3V 8-bit",	0x01, 2048, 128, 0x4000, NAND_IS_AND | NAND_NO_AUTOINCR | NAND_4PAGE_ARRAY},
 
diff --git a/fs/jffs2/jffs2_1pass.c b/fs/jffs2/jffs2_1pass.c
index e53aa31..6658512 100644
--- a/fs/jffs2/jffs2_1pass.c
+++ b/fs/jffs2/jffs2_1pass.c
@@ -143,7 +143,7 @@
 /* keeps pointer to currentlu processed partition */
 static struct part_info *current_part;
 
-#if defined(CONFIG_JFFS2_NAND) && (CONFIG_COMMANDS & CFG_CMD_NAND)
+#if defined(CONFIG_JFFS2_NAND) && (CONFIG_COMMANDS & CFG_CMD_NAND) && !defined(CONFIG_NEW_NAND_CODE)
 /*
  * Support for jffs2 on top of NAND-flash
  *
@@ -290,7 +290,7 @@ static inline void *get_fl_mem(u32 off, u32 size, void *ext_buf)
 		return get_fl_mem_nor(off);
 #endif
 
-#if defined(CONFIG_JFFS2_NAND) && (CONFIG_COMMANDS & CFG_CMD_NAND)
+#if defined(CONFIG_JFFS2_NAND) && (CONFIG_COMMANDS & CFG_CMD_NAND) && !defined(CONFIG_NEW_NAND_CODE)
 	if (id->type == MTD_DEV_TYPE_NAND)
 		return get_fl_mem_nand(off, size, ext_buf);
 #endif
@@ -308,7 +308,7 @@ static inline void *get_node_mem(u32 off)
 		return get_node_mem_nor(off);
 #endif
 
-#if defined(CONFIG_JFFS2_NAND) && (CONFIG_COMMANDS & CFG_CMD_NAND)
+#if defined(CONFIG_JFFS2_NAND) && (CONFIG_COMMANDS & CFG_CMD_NAND) && !defined(CONFIG_NEW_NAND_CODE)
 	if (id->type == MTD_DEV_TYPE_NAND)
 		return get_node_mem_nand(off);
 #endif
@@ -319,7 +319,7 @@ static inline void *get_node_mem(u32 off)
 
 static inline void put_fl_mem(void *buf)
 {
-#if defined(CONFIG_JFFS2_NAND) && (CONFIG_COMMANDS & CFG_CMD_NAND)
+#if defined(CONFIG_JFFS2_NAND) && (CONFIG_COMMANDS & CFG_CMD_NAND) && !defined(CONFIG_NEW_NAND_CODE)
 	struct mtdids *id = current_part->dev->id;
 
 	if (id->type == MTD_DEV_TYPE_NAND)
diff --git a/fs/jffs2/jffs2_nand_1pass.c b/fs/jffs2/jffs2_nand_1pass.c
index ce80a43..e5c2a7d 100644
--- a/fs/jffs2/jffs2_nand_1pass.c
+++ b/fs/jffs2/jffs2_nand_1pass.c
@@ -1,6 +1,6 @@
 #include <common.h>
 
-#if (CONFIG_COMMANDS & CFG_CMD_JFFS2)
+#if defined(CONFIG_NEW_NAND_CODE) && (CONFIG_COMMANDS & CFG_CMD_JFFS2)
 
 #include <malloc.h>
 #include <linux/stat.h>
@@ -12,12 +12,12 @@
 
 #include "jffs2_nand_private.h"
 
-#define	NODE_CHUNK  	1024	/* size of memory allocation chunk in b_nodes */
+#define	NODE_CHUNK	1024	/* size of memory allocation chunk in b_nodes */
 
 /* Debugging switches */
 #undef	DEBUG_DIRENTS		/* print directory entry list after scan */
 #undef	DEBUG_FRAGMENTS		/* print fragment list after scan */
-#undef	DEBUG  			/* enable debugging messages */
+#undef	DEBUG			/* enable debugging messages */
 
 #ifdef  DEBUG
 # define DEBUGF(fmt,args...)	printf(fmt ,##args)
@@ -25,7 +25,6 @@
 # define DEBUGF(fmt,args...)
 #endif
 
-static int nanddev = -1; /* nand device of current partition */
 static nand_info_t *nand;
 
 /* Compression names */
@@ -385,10 +384,10 @@ jffs2_1pass_find_inode(struct b_lists * pL, const char *name, u32 pino)
 				continue;
 
 			if (jDir->version == version && inode != 0) {
-			    	/* I'm pretty sure this isn't legal */
+				/* I'm pretty sure this isn't legal */
 				putstr(" ** ERROR ** ");
-//				putnstr(jDir->name, jDir->nsize);
-//				putLabeledWord(" has dup version =", version);
+/*				putnstr(jDir->name, jDir->nsize); */
+/*				putLabeledWord(" has dup version =", version); */
 			}
 			inode = jDir->ino;
 			version = jDir->version;
@@ -574,15 +573,15 @@ jffs2_1pass_resolve_inode(struct b_lists * pL, u32 ino)
 	/* we need to search all and return the inode with the highest version */
 	for (jDir = (struct b_dirent *)pL->dir.listHead; jDir; jDir = jDir->next) {
 		if (ino == jDir->ino) {
-		    	if (jDir->version < version)
+			if (jDir->version < version)
 				continue;
 
 			if (jDir->version == version && jDirFoundType) {
-			    	/* I'm pretty sure this isn't legal */
+				/* I'm pretty sure this isn't legal */
 				putstr(" ** ERROR ** ");
-//				putnstr(jDir->name, jDir->nsize);
-//				putLabeledWord(" has dup version (resolve) = ",
-//					version);
+/*				putnstr(jDir->name, jDir->nsize); */
+/*				putLabeledWord(" has dup version (resolve) = ", */
+/*					version); */
 			}
 
 			jDirFoundType = jDir->type;
@@ -686,12 +685,6 @@ jffs2_1pass_rescan_needed(struct part_info *part)
 		return 1;
 	}
 
-#if defined(CONFIG_JFFS2_NAND) && (CONFIG_COMMANDS & CFG_CMD_NAND)
-	if (nanddev != (int)part->usr_priv - 1) {
-		DEBUGF ("rescan: nand device changed\n");
-		return -1;
-	}
-#endif /* defined(CONFIG_JFFS2_NAND) && (CONFIG_COMMANDS & CFG_CMD_NAND) */
 	/* FIXME */
 #if 0
 	/* but suppose someone reflashed a partition at the same offset... */
@@ -806,10 +799,8 @@ jffs2_1pass_build_lists(struct part_info * part)
 	u32 counterF = 0;
 	u32 counterN = 0;
 
-#if defined(CONFIG_JFFS2_NAND) && (CONFIG_COMMANDS & CFG_CMD_NAND)
-	nanddev = (int)part->usr_priv - 1;
-	nand = &nand_info[nanddev];
-#endif /* defined(CONFIG_JFFS2_NAND) && (CONFIG_COMMANDS & CFG_CMD_NAND) */
+	struct mtdids *id = part->dev->id;
+	nand = nand_info + id->num;
 
 	/* if we are building a list we need to refresh the cache. */
 	jffs_init_1pass_list(part);
@@ -993,7 +984,7 @@ jffs2_1pass_load(char *dest, struct part_info * part, const char *fname)
 	long ret = 0;
 	u32 inode;
 
-	if (! (pl  = jffs2_get_list(part, "load")))
+	if (! (pl = jffs2_get_list(part, "load")))
 		return 0;
 
 	if (! (inode = jffs2_1pass_search_inode(pl, fname, 1))) {
@@ -1025,7 +1016,7 @@ jffs2_1pass_info(struct part_info * part)
 	struct b_lists *pl;
 	int i;
 
-	if (! (pl  = jffs2_get_list(part, "info")))
+	if (! (pl = jffs2_get_list(part, "info")))
 		return 0;
 
 	jffs2_1pass_fill_info(pl, &info);
diff --git a/include/asm-arm/io.h b/include/asm-arm/io.h
index c2b69fb..648a10d 100644
--- a/include/asm-arm/io.h
+++ b/include/asm-arm/io.h
@@ -58,6 +58,14 @@ extern void __raw_readsl(unsigned int addr, void *data, int longlen);
 #define __raw_readw(a)			__arch_getw(a)
 #define __raw_readl(a)			__arch_getl(a)
 
+#define writeb(v,a)			__arch_putb(v,a)
+#define writew(v,a)			__arch_putw(v,a)
+#define writel(v,a)			__arch_putl(v,a)
+
+#define readb(a)			__arch_getb(a)
+#define readw(a)			__arch_getw(a)
+#define readl(a)			__arch_getl(a)
+
 /*
  * The compiler seems to be incapable of optimising constants
  * properly.  Spell it out to the compiler in some cases.
diff --git a/include/configs/netstar.h b/include/configs/netstar.h
new file mode 100644
index 0000000..30d2654
--- /dev/null
+++ b/include/configs/netstar.h
@@ -0,0 +1,265 @@
+/*
+ * (C) Copyright 2005 2N TELEKOMUNIKACE, Ladislav Michl
+ *
+ * Configuation settings for the TI OMAP NetStar board.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#include <configs/omap1510.h>
+
+/*
+ * High Level Configuration Options
+ * (easy to change)
+ */
+#define CONFIG_ARM925T	1		/* This is an arm925t CPU */
+#define CONFIG_OMAP	1		/* in a TI OMAP core */
+#define CONFIG_OMAP1510 1		/* which is in a 5910 */
+
+/* Input clock of PLL */
+#define CONFIG_SYS_CLK_FREQ	150000000	/* 150MHz input clock */
+#define CONFIG_XTAL_FREQ	12000000
+
+#undef CONFIG_USE_IRQ			/* we don't need IRQ/FIQ stuff */
+
+#define CONFIG_MISC_INIT_R		/* There is nothing to really init */
+#define BOARD_LATE_INIT			/* but we flash the LEDs here */
+
+#define CONFIG_CMDLINE_TAG		1	/* enable passing of ATAGs */
+#define CONFIG_SETUP_MEMORY_TAGS	1
+#define CONFIG_INITRD_TAG		1
+
+#define CFG_DEVICE_NULLDEV		1	/* enable null device */
+#define CONFIG_SILENT_CONSOLE		1	/* enable silent startup */
+
+/*
+ * Physical Memory Map
+ */
+#define CONFIG_NR_DRAM_BANKS	1		/* we have 1 bank of DRAM */
+#define PHYS_SDRAM_1		0x10000000	/* SDRAM Bank #1 */
+#define PHYS_FLASH_1		0x00000000	/* Flash Bank #1 */
+
+/*
+ * FLASH organization
+ */
+#define CFG_FLASH_BASE		PHYS_FLASH_1
+#define CFG_MAX_FLASH_BANKS	1
+#if (PHYS_SDRAM_1_SIZE == SZ_32M)
+/*#if 1*/
+#define CFG_FLASH_CFI			/* Flash is CFI conformant */
+#define CFG_FLASH_CFI_DRIVER		/* Use the common driver */
+#define CFG_FLASH_EMPTY_INFO
+#define CFG_MAX_FLASH_SECT	128
+#else
+#define PHYS_FLASH_1_SIZE	SZ_1M
+#define CFG_MAX_FLASH_SECT	19
+#define CFG_FLASH_ERASE_TOUT	(5*CFG_HZ) /* in ticks */
+#define CFG_FLASH_WRITE_TOUT	(5*CFG_HZ)
+#endif
+
+#define CFG_MONITOR_BASE	PHYS_FLASH_1
+#define CFG_MONITOR_LEN		SZ_256K
+
+/*
+ * Environment settings
+ */
+#define CFG_ENV_IS_IN_FLASH
+#define ENV_IS_SOLITARY
+#define CFG_ENV_ADDR		0x4000
+#define CFG_ENV_SIZE		SZ_8K
+#define CFG_ENV_SECT_SIZE	SZ_8K
+#define CFG_ENV_ADDR_REDUND	0x6000
+#define CFG_ENV_SIZE_REDUND	CFG_ENV_SIZE
+#define CONFIG_ENV_OVERWRITE
+
+/*
+ * Size of malloc() pool
+ */
+#define CFG_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
+/* XXX #define CFG_MALLOC_LEN		(SZ_64K - CFG_GBL_DATA_SIZE)*/
+#define CFG_MALLOC_LEN		SZ_4M
+
+/*
+ * The stack size is set up in start.S using the settings below
+ */
+/* XXX #define CONFIG_STACKSIZE	SZ_8K	/XXX* regular stack */
+#define CONFIG_STACKSIZE	SZ_1M	/* regular stack */
+
+/*
+ * Hardware drivers
+ */
+#define CONFIG_DRIVER_SMC91111
+#define CONFIG_SMC91111_BASE	0x04000300
+
+/*
+ * NS16550 Configuration
+ */
+#define CFG_NS16550
+#define CFG_NS16550_SERIAL
+#define CFG_NS16550_REG_SIZE	(-4)
+#define CFG_NS16550_CLK		(CONFIG_XTAL_FREQ)	/* can be 12M/32Khz or 48Mhz  */
+#define CFG_NS16550_COM1	OMAP1510_UART1_BASE	/* uart1 */
+
+#define CONFIG_CONS_INDEX	1
+#define CONFIG_BAUDRATE		115200
+#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+
+/*#define CONFIG_SKIP_RELOCATE_UBOOT*/
+/*#define CONFIG_SKIP_LOWLEVEL_INIT */
+
+/*
+ * NAND flash
+ */
+#define CFG_MAX_NAND_DEVICE	1
+#define CFG_NAND_BASE	0x04000000 + (2 << 23)
+#define CONFIG_NEW_NAND_CODE
+
+/*
+ * JFFS2 partitions (mtdparts command line support)
+ */
+#define CONFIG_JFFS2_CMDLINE
+#define MTDIDS_DEFAULT		"nor0=omapflash.0,nand0=omapnand.0"
+#define MTDPARTS_DEFAULT	"mtdparts=omapflash.0:8k@16k(env),8k(r_env),448k@576k(u-boot);omapnand.0:48M(rootfs0),48M(rootfs1),-(data)"
+
+#if 0
+#define CONFIG_COMMANDS		(CFG_CMD_BDI    | \
+				 CFG_CMD_BOOTD  | \
+				 CFG_CMD_DHCP   | \
+				 CFG_CMD_ENV	| \
+				 CFG_CMD_FLASH  | \
+				 CFG_CMD_IMI    | \
+				 CFG_CMD_LOADB  | \
+				 CFG_CMD_NET    | \
+				 CFG_CMD_MEMORY | \
+				 CFG_CMD_PING   | \
+				 CFG_CMD_RUN)
+
+#else
+#define CONFIG_COMMANDS		(CFG_CMD_BDI    | \
+				 CFG_CMD_BOOTD  | \
+				 CFG_CMD_DHCP   | \
+				 CFG_CMD_ENV	| \
+				 CFG_CMD_FLASH  | \
+				 CFG_CMD_NAND	| \
+				 CFG_CMD_IMI    | \
+				 CFG_CMD_JFFS2	| \
+				 CFG_CMD_LOADB  | \
+				 CFG_CMD_NET    | \
+				 CFG_CMD_MEMORY | \
+				 CFG_CMD_PING   | \
+				 CFG_CMD_RUN)
+
+#define CONFIG_JFFS2_NAND	1	/* jffs2 on nand support */
+#endif
+
+#define CONFIG_BOOTP_MASK	CONFIG_BOOTP_DEFAULT
+#define CONFIG_LOOPW
+
+/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
+#include <cmd_confdefs.h>
+
+#define CONFIG_BOOTDELAY	3
+#define CONFIG_ZERO_BOOTDELAY_CHECK	/* allow to break in always */
+#undef  CONFIG_BOOTARGS		/* the boot command will set bootargs*/
+#define CFG_AUTOLOAD		"n"		/* No autoload */
+#define CONFIG_BOOTCOMMAND	"run nboot"
+#define CONFIG_PREBOOT		"run setup"
+#define	CONFIG_EXTRA_ENV_SETTINGS				\
+	"setup=setenv bootargs console=ttyS0,$baudrate "	\
+		"$mtdparts\0"					\
+	"ospart=0\0"						\
+	"setpart="						\
+	"if test -n $swapos; then "				\
+		"if test $ospart -eq 0; then chpart nand0,1; else chpart nand0,0; fi; "\
+		"setenv swapos; saveenv; "			\
+	"else "							\
+		"chpart nand0,$ospart; "			\
+	"fi\0"							\
+	"nfsargs=setenv bootargs $bootargs "			\
+		"ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname::off " \
+		"nfsroot=$rootpath root=/dev/nfs\0"		\
+	"flashargs=run setpart;setenv bootargs $bootargs "	\
+		"root=/dev/mtdblock$partition ro "		\
+		"rootfstype=jffs2\0"				\
+	"initrdargs=setenv bootargs $bootargs "			\
+		"ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname::off\0" \
+	"iboot=bootp;run initrdargs;tftp;bootm\0"		\
+	"fboot=run flashargs;fsload /boot/uImage;bootm\0"	\
+	"nboot=bootp;run nfsargs;tftp;bootm\0"
+
+#if 0	/* feel free to disable for development */
+#define	CONFIG_AUTOBOOT_KEYED		/* Enable password protection	*/
+#define CONFIG_AUTOBOOT_PROMPT	"\nNetStar PBX - boot in %d sec...\n"
+#define CONFIG_AUTOBOOT_DELAY_STR	"R"	/* 1st "password"	*/
+#define CONFIG_BOOT_RETRY_TIME	30
+#endif
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CFG_LONGHELP				/* undef to save memory		*/
+#define CFG_PROMPT		"# "		/* Monitor Command Prompt	*/
+#define CFG_CBSIZE		256		/* Console I/O Buffer Size	*/
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CFG_MAXARGS		16		/* max number of command args	*/
+#define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+
+#define CFG_HUSH_PARSER
+#define CFG_PROMPT_HUSH_PS2	"> "
+#define CONFIG_AUTO_COMPLETE
+
+#define CFG_MEMTEST_START	PHYS_SDRAM_1
+#define CFG_MEMTEST_END		PHYS_SDRAM_1 + PHYS_SDRAM_1_SIZE
+
+#undef	CFG_CLKS_IN_HZ		/* everything, incl board info, in Hz */
+
+#define CFG_LOAD_ADDR		PHYS_SDRAM_1 + 0x400000	/* default load address */
+
+/* The 1510 has 3 timers, they can be driven by the RefClk (12Mhz) or by DPLL1.
+ * This time is further subdivided by a local divisor.
+ */
+#define CFG_TIMERBASE		OMAP1510_TIMER1_BASE
+#define CFG_PVT			7		/* 2^(pvt+1), divide by 256 */
+#define CFG_HZ			((CONFIG_SYS_CLK_FREQ)/(2 << CFG_PVT))
+
+#define OMAP5910_DPLL_DIV	1
+#define OMAP5910_DPLL_MUL	((CONFIG_SYS_CLK_FREQ * \
+				 (1 << OMAP5910_DPLL_DIV)) / CONFIG_XTAL_FREQ)
+
+#define OMAP5910_ARM_PER_DIV	2	/* CKL/4 */
+#define OMAP5910_LCD_DIV	2	/* CKL/4 */
+#define OMAP5910_ARM_DIV	0	/* CKL/1 */
+#define OMAP5910_DSP_DIV	0	/* CKL/1 */
+#define OMAP5910_TC_DIV		1	/* CKL/2 */
+#define OMAP5910_DSP_MMU_DIV	1	/* CKL/2 */
+#define OMAP5910_ARM_TIM_SEL	1	/* CKL used for MPU timers */
+
+#define OMAP5910_ARM_EN_CLK	0x03d6	/* 0000 0011 1101 0110b  Clock Enable */
+#define OMAP5910_ARM_CKCTL	((OMAP5910_ARM_PER_DIV)  |	\
+				 (OMAP5910_LCD_DIV << 2) |	\
+				 (OMAP5910_ARM_DIV << 4) |	\
+				 (OMAP5910_DSP_DIV << 6) |	\
+				 (OMAP5910_TC_DIV << 8) |	\
+				 (OMAP5910_DSP_MMU_DIV << 10) |	\
+				 (OMAP5910_ARM_TIM_SEL << 12))
+
+#endif	/* __CONFIG_H */
diff --git a/include/linux/mtd/mtd-abi.h b/include/linux/mtd/mtd-abi.h
index afe96b5..3d1d416 100644
--- a/include/linux/mtd/mtd-abi.h
+++ b/include/linux/mtd/mtd-abi.h
@@ -1,7 +1,7 @@
 /*
  * $Id: mtd-abi.h,v 1.7 2004/11/23 15:37:32 gleixner Exp $
  *
- * Portions of MTD ABI definition which are shared by kernel and user space 
+ * Portions of MTD ABI definition which are shared by kernel and user space
  */
 
 #ifndef __MTD_ABI_H__
@@ -27,17 +27,17 @@ struct mtd_oob_buf {
 #define MTD_OTHER		14
 #define MTD_UNKNOWN		15
 
-#define MTD_CLEAR_BITS		1       // Bits can be cleared (flash)
-#define MTD_SET_BITS		2       // Bits can be set
-#define MTD_ERASEABLE		4       // Has an erase function
-#define MTD_WRITEB_WRITEABLE	8       // Direct IO is possible
-#define MTD_VOLATILE		16      // Set for RAMs
-#define MTD_XIP			32	// eXecute-In-Place possible
-#define MTD_OOB			64	// Out-of-band data (NAND flash)
-#define MTD_ECC			128	// Device capable of automatic ECC
-#define MTD_NO_VIRTBLOCKS	256	// Virtual blocks not allowed
+#define MTD_CLEAR_BITS		1       /* Bits can be cleared (flash) */
+#define MTD_SET_BITS		2       /* Bits can be set */
+#define MTD_ERASEABLE		4       /* Has an erase function */
+#define MTD_WRITEB_WRITEABLE	8       /* Direct IO is possible */
+#define MTD_VOLATILE		16      /* Set for RAMs */
+#define MTD_XIP			32	/* eXecute-In-Place possible */
+#define MTD_OOB			64	/* Out-of-band data (NAND flash) */
+#define MTD_ECC			128	/* Device capable of automatic ECC */
+#define MTD_NO_VIRTBLOCKS	256	/* Virtual blocks not allowed */
 
-// Some common devices / combinations of capabilities
+/* Some common devices / combinations of capabilities */
 #define MTD_CAP_ROM		0
 #define MTD_CAP_RAM		(MTD_CLEAR_BITS|MTD_SET_BITS|MTD_WRITEB_WRITEABLE)
 #define MTD_CAP_NORFLASH        (MTD_CLEAR_BITS|MTD_ERASEABLE)
@@ -45,31 +45,31 @@ struct mtd_oob_buf {
 #define MTD_WRITEABLE		(MTD_CLEAR_BITS|MTD_SET_BITS)
 
 
-// Types of automatic ECC/Checksum available
-#define MTD_ECC_NONE		0 	// No automatic ECC available
-#define MTD_ECC_RS_DiskOnChip	1	// Automatic ECC on DiskOnChip
-#define MTD_ECC_SW		2	// SW ECC for Toshiba & Samsung devices
+/* Types of automatic ECC/Checksum available */
+#define MTD_ECC_NONE		0 	/* No automatic ECC available */
+#define MTD_ECC_RS_DiskOnChip	1	/* Automatic ECC on DiskOnChip */
+#define MTD_ECC_SW		2	/* SW ECC for Toshiba & Samsung devices */
 
 /* ECC byte placement */
-#define MTD_NANDECC_OFF		0	// Switch off ECC (Not recommended)
-#define MTD_NANDECC_PLACE	1	// Use the given placement in the structure (YAFFS1 legacy mode)
-#define MTD_NANDECC_AUTOPLACE	2	// Use the default placement scheme
-#define MTD_NANDECC_PLACEONLY	3	// Use the given placement in the structure (Do not store ecc result on read)
-#define MTD_NANDECC_AUTOPL_USR 	4	// Use the given autoplacement scheme rather than using the default
+#define MTD_NANDECC_OFF		0	/* Switch off ECC (Not recommended) */
+#define MTD_NANDECC_PLACE	1	/* Use the given placement in the structure (YAFFS1 legacy mode) */
+#define MTD_NANDECC_AUTOPLACE	2	/* Use the default placement scheme */
+#define MTD_NANDECC_PLACEONLY	3	/* Use the given placement in the structure (Do not store ecc result on read) */
+#define MTD_NANDECC_AUTOPL_USR 	4	/* Use the given autoplacement scheme rather than using the default */
 
 struct mtd_info_user {
 	uint8_t type;
 	uint32_t flags;
-	uint32_t size;	 // Total size of the MTD
+	uint32_t size;	 /* Total size of the MTD */
 	uint32_t erasesize;
-	uint32_t oobblock;  // Size of OOB blocks (e.g. 512)
-	uint32_t oobsize;   // Amount of OOB data per block (e.g. 16)
+	uint32_t oobblock;  /* Size of OOB blocks (e.g. 512) */
+	uint32_t oobsize;   /* Amount of OOB data per block (e.g. 16) */
 	uint32_t ecctype;
 	uint32_t eccsize;
 };
 
 struct region_info_user {
-	uint32_t offset;		/* At which this region starts, 
+	uint32_t offset;		/* At which this region starts,
 					 * from the beginning of the MTD */
 	uint32_t erasesize;		/* For this region */
 	uint32_t numblocks;		/* Number of blocks in this region */
diff --git a/include/linux/mtd/mtd.h b/include/linux/mtd/mtd.h
index 9ef4cce..13e9080 100644
--- a/include/linux/mtd/mtd.h
+++ b/include/linux/mtd/mtd.h
@@ -1,4 +1,4 @@
-/* 
+/*
  * $Id: mtd.h,v 1.56 2004/08/09 18:46:04 dmarlin Exp $
  *
  * Copyright (C) 1999-2003 David Woodhouse <dwmw2@infradead.org> et al.
@@ -46,7 +46,7 @@ struct mtd_erase_region_info {
 struct mtd_info {
 	u_char type;
 	u_int32_t flags;
-	u_int32_t size;	 // Total size of the MTD
+	u_int32_t size;	 /* Total size of the MTD */
 
 	/* "Major" erase size for the device. Naïve users may take this
 	 * to be the only erase size available, or may use the more detailed
@@ -54,25 +54,25 @@ struct mtd_info {
 	 */
 	u_int32_t erasesize;
 
-	u_int32_t oobblock;  // Size of OOB blocks (e.g. 512)
-	u_int32_t oobsize;   // Amount of OOB data per block (e.g. 16)
-	u_int32_t oobavail;  // Number of bytes in OOB area available for fs 
+	u_int32_t oobblock;  /* Size of OOB blocks (e.g. 512) */
+	u_int32_t oobsize;   /* Amount of OOB data per block (e.g. 16) */
+	u_int32_t oobavail;  /* Number of bytes in OOB area available for fs  */
 	u_int32_t ecctype;
 	u_int32_t eccsize;
-	
 
-	// Kernel-only stuff starts here.
+
+	/* Kernel-only stuff starts here. */
 	char *name;
 	int index;
 
-	// oobinfo is a nand_oobinfo structure, which can be set by iotcl (MEMSETOOBINFO)
+	/* oobinfo is a nand_oobinfo structure, which can be set by iotcl (MEMSETOOBINFO) */
 	struct nand_oobinfo oobinfo;
 
 	/* Data for variable erase regions. If numeraseregions is zero,
-	 * it means that the whole device has erasesize as given above. 
+	 * it means that the whole device has erasesize as given above.
 	 */
 	int numeraseregions;
-	struct mtd_erase_region_info *eraseregions; 
+	struct mtd_erase_region_info *eraseregions;
 
 	/* This really shouldn't be here. It can go away in 2.5 */
 	u_int32_t bank_size;
@@ -95,10 +95,10 @@ struct mtd_info {
 	int (*read_oob) (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf);
 	int (*write_oob) (struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen, const u_char *buf);
 
-	/* 
-	 * Methods to access the protection register area, present in some 
+	/*
+	 * Methods to access the protection register area, present in some
 	 * flash devices. The user data is one time programmable but the
-	 * factory data is read only. 
+	 * factory data is read only.
 	 */
 	int (*read_user_prot_reg) (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf);
 
@@ -109,14 +109,14 @@ struct mtd_info {
 #if 0
 	/* kvec-based read/write methods. We need these especially for NAND flash,
 	   with its limited number of write cycles per erase.
-	   NB: The 'count' parameter is the number of _vectors_, each of 
+	   NB: The 'count' parameter is the number of _vectors_, each of
 	   which contains an (ofs, len) tuple.
 	*/
 	int (*readv) (struct mtd_info *mtd, struct kvec *vecs, unsigned long count, loff_t from, size_t *retlen);
-	int (*readv_ecc) (struct mtd_info *mtd, struct kvec *vecs, unsigned long count, loff_t from, 
+	int (*readv_ecc) (struct mtd_info *mtd, struct kvec *vecs, unsigned long count, loff_t from,
 		size_t *retlen, u_char *eccbuf, struct nand_oobinfo *oobsel);
 	int (*writev) (struct mtd_info *mtd, const struct kvec *vecs, unsigned long count, loff_t to, size_t *retlen);
-	int (*writev_ecc) (struct mtd_info *mtd, const struct kvec *vecs, unsigned long count, loff_t to, 
+	int (*writev_ecc) (struct mtd_info *mtd, const struct kvec *vecs, unsigned long count, loff_t to,
 		size_t *retlen, u_char *eccbuf, struct nand_oobinfo *oobsel);
 #endif
 	/* Sync */
@@ -179,7 +179,7 @@ int default_mtd_readv(struct mtd_info *mtd, struct kvec *vecs,
 #define MTD_WRITEECC(mtd, args...) (*(mtd->write_ecc))(mtd, args)
 #define MTD_READOOB(mtd, args...) (*(mtd->read_oob))(mtd, args)
 #define MTD_WRITEOOB(mtd, args...) (*(mtd->write_oob))(mtd, args)
-#define MTD_SYNC(mtd) do { if (mtd->sync) (*(mtd->sync))(mtd);  } while (0) 
+#define MTD_SYNC(mtd) do { if (mtd->sync) (*(mtd->sync))(mtd);  } while (0)
 
 
 #ifdef CONFIG_MTD_PARTITIONS
diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h
index 9a0108f..065e1cb 100644
--- a/include/linux/mtd/nand.h
+++ b/include/linux/mtd/nand.h
@@ -24,7 +24,7 @@
  *			bat later if I did something naughty.
  *   10-11-2000 SJH     Added private NAND flash structure for driver
  *   10-24-2000 SJH     Added prototype for 'nand_scan' function
- *   10-29-2001 TG	changed nand_chip structure to support 
+ *   10-29-2001 TG	changed nand_chip structure to support
  *			hardwarespecific function for accessing control lines
  *   02-21-2002 TG	added support for different read/write adress and
  *			ready/busy line access function
@@ -36,14 +36,14 @@
  *			CONFIG_MTD_NAND_ECC_JFFS2 is not set
  *   08-10-2002 TG	extensions to nand_chip structure to support HW-ECC
  *
- *   08-29-2002 tglx 	nand_chip structure: data_poi for selecting 
+ *   08-29-2002 tglx 	nand_chip structure: data_poi for selecting
  *			internal / fs-driver buffer
  *			support for 6byte/512byte hardware ECC
  *			read_ecc, write_ecc extended for different oob-layout
  *			oob layout selections: NAND_NONE_OOB, NAND_JFFS2_OOB,
  *			NAND_YAFFS_OOB
  *  11-25-2002 tglx	Added Manufacturer code FUJITSU, NATIONAL
- *			Split manufacturer and device ID structures 
+ *			Split manufacturer and device ID structures
  *
  *  02-08-2004 tglx 	added option field to nand structure for chip anomalities
  *  05-25-2004 tglx 	added bad block table support, ST-MICRO manufacturer id
@@ -120,7 +120,7 @@ extern int nand_read_raw (struct mtd_info *mtd, uint8_t *buf, loff_t from, size_
 #define NAND_STATUS_READY	0x40
 #define NAND_STATUS_WP		0x80
 
-/* 
+/*
  * Constants for ECC_MODES
  */
 
@@ -162,12 +162,12 @@ extern int nand_read_raw (struct mtd_info *mtd, uint8_t *buf, loff_t from, size_
 #define NAND_CACHEPRG		0x00000008
 /* Chip has copy back function */
 #define NAND_COPYBACK		0x00000010
-/* AND Chip which has 4 banks and a confusing page / block 
+/* AND Chip which has 4 banks and a confusing page / block
  * assignment. See Renesas datasheet for further information */
 #define NAND_IS_AND		0x00000020
 /* Chip has a array of 4 pages which can be read without
  * additional ready /busy waits */
-#define NAND_4PAGE_ARRAY	0x00000040 
+#define NAND_4PAGE_ARRAY	0x00000040
 
 /* Options valid for Samsung large page devices */
 #define NAND_SAMSUNG_LP_OPTIONS \
@@ -186,8 +186,8 @@ extern int nand_read_raw (struct mtd_info *mtd, uint8_t *buf, loff_t from, size_
 /* Use a flash based bad block table. This option is passed to the
  * default bad block table function. */
 #define NAND_USE_FLASH_BBT	0x00010000
-/* The hw ecc generator provides a syndrome instead a ecc value on read 
- * This can only work if we have the ecc bytes directly behind the 
+/* The hw ecc generator provides a syndrome instead a ecc value on read
+ * This can only work if we have the ecc bytes directly behind the
  * data bytes. Applies for DOC and AG-AND Renesas HW Reed Solomon generators */
 #define NAND_HWECC_SYNDROME	0x00020000
 
@@ -218,7 +218,7 @@ struct nand_chip;
 #if 0
 /**
  * struct nand_hw_control - Control structure for hardware controller (e.g ECC generator) shared among independend devices
- * @lock:               protection lock  
+ * @lock:               protection lock
  * @active:		the mtd device which holds the controller currently
  */
 struct nand_hw_control {
@@ -229,8 +229,8 @@ struct nand_hw_control {
 
 /**
  * struct nand_chip - NAND Private Flash Chip Data
- * @IO_ADDR_R:		[BOARDSPECIFIC] address to read the 8 I/O lines of the flash device 
- * @IO_ADDR_W:		[BOARDSPECIFIC] address to write the 8 I/O lines of the flash device 
+ * @IO_ADDR_R:		[BOARDSPECIFIC] address to read the 8 I/O lines of the flash device
+ * @IO_ADDR_W:		[BOARDSPECIFIC] address to write the 8 I/O lines of the flash device
  * @read_byte:		[REPLACEABLE] read one byte from the chip
  * @write_byte:		[REPLACEABLE] write one byte to the chip
  * @read_word:		[REPLACEABLE] read one word from the chip
@@ -253,7 +253,7 @@ struct nand_hw_control {
  *			be provided if a hardware ECC is available
  * @erase_cmd:		[INTERN] erase command write function, selectable due to AND support
  * @scan_bbt:		[REPLACEABLE] function to scan bad block table
- * @eccmode:		[BOARDSPECIFIC] mode of ecc, see defines 
+ * @eccmode:		[BOARDSPECIFIC] mode of ecc, see defines
  * @eccsize: 		[INTERN] databytes used per ecc-calculation
  * @eccbytes: 		[INTERN] number of ecc bytes per ecc-calculation step
  * @eccsteps:		[INTERN] number of ecc calculation steps per page
@@ -265,7 +265,7 @@ struct nand_hw_control {
  * @phys_erase_shift:	[INTERN] number of address bits in a physical eraseblock
  * @bbt_erase_shift:	[INTERN] number of address bits in a bbt entry
  * @chip_shift:		[INTERN] number of address bits in one chip
- * @data_buf:		[INTERN] internal buffer for one page + oob 
+ * @data_buf:		[INTERN] internal buffer for one page + oob
  * @oob_buf:		[INTERN] oob buffer for one eraseblock
  * @oobdirty:		[INTERN] indicates that oob_buf must be reinitialized
  * @data_poi:		[INTERN] pointer to a data buffer
@@ -280,20 +280,20 @@ struct nand_hw_control {
  * @bbt:		[INTERN] bad block table pointer
  * @bbt_td:		[REPLACEABLE] bad block table descriptor for flash lookup
  * @bbt_md:		[REPLACEABLE] bad block table mirror descriptor
- * @badblock_pattern:	[REPLACEABLE] bad block scan pattern used for initial bad block scan 
+ * @badblock_pattern:	[REPLACEABLE] bad block scan pattern used for initial bad block scan
  * @controller:		[OPTIONAL] a pointer to a hardware controller structure which is shared among multiple independend devices
  * @priv:		[OPTIONAL] pointer to private chip date
  */
- 
+
 struct nand_chip {
 	void  __iomem	*IO_ADDR_R;
 	void  __iomem 	*IO_ADDR_W;
-	
+
 	u_char		(*read_byte)(struct mtd_info *mtd);
 	void		(*write_byte)(struct mtd_info *mtd, u_char byte);
 	u16		(*read_word)(struct mtd_info *mtd);
 	void		(*write_word)(struct mtd_info *mtd, u16 word);
-	
+
 	void		(*write_buf)(struct mtd_info *mtd, const u_char *buf, int len);
 	void		(*read_buf)(struct mtd_info *mtd, u_char *buf, int len);
 	int		(*verify_buf)(struct mtd_info *mtd, const u_char *buf, int len);
@@ -358,7 +358,7 @@ struct nand_chip {
  * @name:  	Identify the device type
  * @id:   	device ID code
  * @pagesize:  	Pagesize in bytes. Either 256 or 512 or 0
- *		If the pagesize is 0, then the real pagesize 
+ *		If the pagesize is 0, then the real pagesize
  *		and the eraseize are determined from the
  *		extended id bytes in the chip
  * @erasesize: 	Size of an erase block in the flash device.
@@ -387,7 +387,7 @@ struct nand_manufacturers {
 extern struct nand_flash_dev nand_flash_ids[];
 extern struct nand_manufacturers nand_manuf_ids[];
 
-/** 
+/**
  * struct nand_bbt_descr - bad block table descriptor
  * @options:	options for this descriptor
  * @pages:	the page(s) where we find the bbt, used with option BBT_ABSPAGE
@@ -398,14 +398,14 @@ extern struct nand_manufacturers nand_manuf_ids[];
  * @version:	version read from the bbt page during scan
  * @len:	length of the pattern, if 0 no pattern check is performed
  * @maxblocks:	maximum number of blocks to search for a bbt. This number of
- *		blocks is reserved at the end of the device where the tables are 
+ *		blocks is reserved at the end of the device where the tables are
  *		written.
  * @reserved_block_code: if non-0, this pattern denotes a reserved (rather than
  *              bad) block in the stored bbt
- * @pattern:	pattern to identify bad block table or factory marked good / 
+ * @pattern:	pattern to identify bad block table or factory marked good /
  *		bad blocks, can be NULL, if len = 0
  *
- * Descriptor for the bad block table marker and the descriptor for the 
+ * Descriptor for the bad block table marker and the descriptor for the
  * pattern which identifies good and bad blocks. The assumption is made
  * that the pattern and the version count are always located in the oob area
  * of the first block.
diff --git a/include/nand.h b/include/nand.h
index 29580da..6dbaa42 100644
--- a/include/nand.h
+++ b/include/nand.h
@@ -24,7 +24,7 @@
 #ifndef _NAND_H_
 #define _NAND_H_
 
-#include <linux_compat.h>
+#include <linux/mtd/compat.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/nand.h>