* Patch by Denis Peter, 8 Dec 2003

  - add support for the PATI board (MPC555)
  - add SPI support for the MPC5xx

* Patch by Anders Larsen, 08 Dec 2003:
  add configuration options CONFIG_SERIAL_TAG and CONFIG_REVISION_TAG
  to pass ATAG_SERIAL and ATAG_REVISION, resp., to the ARM target;
  cleanup some redundand #defines

24 files changed, 2885 insertions, 56 deletions

diff --git a/CHANGELOG b/CHANGELOG
index 2c8c336..32d6c62 100644
--- a/CHANGELOG
+++ b/CHANGELOG
@@ -2,6 +2,15 @@
 Changes since U-Boot 1.0.0:
 ======================================================================
 
+* Patch by Denis Peter, 8 Dec 2003
+  - add support for the PATI board (MPC555)
+  - add SPI support for the MPC5xx
+
+* Patch by Anders Larsen, 08 Dec 2003:
+  add configuration options CONFIG_SERIAL_TAG and CONFIG_REVISION_TAG
+  to pass ATAG_SERIAL and ATAG_REVISION, resp., to the ARM target;
+  cleanup some redundand #defines
+
 * Patch by André Schwarz, 8 Dec 2003:
   fixes for Davicom DM9102A Ethernet Chip (#define CONFIG_TULIP_FIX_DAVICOM):
   - TX and RX deskriptors must be quad-word aligned
diff --git a/Makefile b/Makefile
index bb62b0e..36cc089 100644
--- a/Makefile
+++ b/Makefile
@@ -198,6 +198,9 @@ unconfig:
 cmi_mpc5xx_config:	unconfig
 	@./mkconfig $(@:_config=) ppc mpc5xx cmi
 
+PATI_config:unconfig
+	@./mkconfig $(@:_config=) ppc mpc5xx pati mpl
+
 #########################################################################
 ## MPC5xxx Systems
 #########################################################################
diff --git a/board/mpl/common/common_util.c b/board/mpl/common/common_util.c
index 9c98c93..5117394 100644
--- a/board/mpl/common/common_util.c
+++ b/board/mpl/common/common_util.c
@@ -42,6 +42,9 @@
 #include "../mip405/mip405.h"
 #include <405gp_pci.h>
 #endif
+#if defined(CONFIG_PATI)
+#define FIRM_START 0xFFF00000
+#endif
 
 extern int gunzip(void *, int, uchar *, int *);
 extern int mem_test(ulong start, ulong ramsize, int quiet);
@@ -60,14 +63,17 @@ mpl_prg(uchar *src, ulong size)
 	ulong start;
 	flash_info_t *info;
 	int i, rc;
-#if defined(CONFIG_PIP405) || defined(CONFIG_MIP405)
+#if defined(CONFIG_PATI)
+	int start_sect;
+#endif
+#if defined(CONFIG_PIP405) || defined(CONFIG_MIP405) || defined(CONFIG_PATI)
 	char *copystr = (char *)src;
 	ulong *magic = (ulong *)src;
 #endif
 
 	info = &flash_info[0];
 
-#if defined(CONFIG_PIP405) || defined(CONFIG_MIP405)
+#if defined(CONFIG_PIP405) || defined(CONFIG_MIP405) || defined(CONFIG_PATI)
 	if (ntohl(magic[0]) != IH_MAGIC) {
 		puts("Bad Magic number\n");
 		return -1;
@@ -90,6 +96,7 @@ mpl_prg(uchar *src, ulong size)
 		printf("Wrong Firmware Image: %s\n", &copystr[i]);
 		return -1;
 	}
+#if !defined(CONFIG_PATI)
 	start = 0 - size;
 	for (i = info->sector_count-1; i > 0; i--) {
 		info->protect[i] = 0; /* unprotect this sector */
@@ -106,6 +113,36 @@ mpl_prg(uchar *src, ulong size)
 		return (1);
 	}
 
+#else /* #if !defined(CONFIG_PATI */
+	start = FIRM_START;
+	start_sect = -1;
+	for (i = 0; i < info->sector_count; i++) {
+		if (start < info->start[i]) {
+			start_sect = i - 1;
+			break;
+		}
+	}
+
+	info->protect[i - 1] = 0;	/* unprotect this sector */
+	for (; i < info->sector_count; i++) {
+		if ((start + size) < info->start[i])
+			break;
+		info->protect[i] = 0;	/* unprotect this sector */
+	}
+
+	i--;
+	/* set-up flash location */
+	/* now erase flash */
+	printf ("Erasing at %lx to %lx (sector %d to %d) (%lx to %lx)\n",
+		start, start + size, start_sect, i,
+		info->start[start_sect], info->start[i]);
+	if ((rc = flash_erase (info, start_sect, i)) != 0) {
+		puts ("ERROR ");
+		flash_perror (rc);
+		return (1);
+	}
+#endif /* defined(CONFIG_PATI) */
+
 #elif defined(CONFIG_VCMA9)
 	start = 0;
 	for (i = 0; i <info->sector_count; i++) {
@@ -227,7 +264,7 @@ mpl_prg_image(uchar *ld_addr)
 	return(rc);
 }
 
-
+#if !defined(CONFIG_PATI)
 void get_backup_values(backup_t *buf)
 {
 	i2c_read(CFG_DEF_EEPROM_ADDR, I2C_BACKUP_ADDR,2,(void *)buf,sizeof(backup_t));
@@ -417,14 +454,17 @@ void show_stdio_dev(void)
 	}
 }
 
+#endif /* #if !defined(CONFIG_PATI) */
 
 int do_mplcommon(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 {
  	ulong size,src,ld_addr;
 	int result;
+#if !defined(CONFIG_PATI)
 	backup_t back;
 	src = MULTI_PURPOSE_SOCKET_ADDR;
 	size = IMAGE_SIZE;
+#endif
 
 	if (strcmp(argv[1], "flash") == 0)
 	{
@@ -460,11 +500,13 @@ int do_mplcommon(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 			result=mpl_prg_image((uchar *)ld_addr);
 			return result;
 		}
+#if !defined(CONFIG_PATI)
 		if (strcmp(argv[2], "mps") == 0) {
 			puts("\nupdating bootloader image from MPS\n");
 			result=mpl_prg((uchar *)src,size);
 			return result;
 		}
+#endif /* #if !defined(CONFIG_PATI)	*/
 	}
 	if (strcmp(argv[1], "mem") == 0)
 	{
@@ -490,6 +532,7 @@ int do_mplcommon(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 		}while(result);
 		return 0;
 	}
+#if !defined(CONFIG_PATI)
 	if (strcmp(argv[1], "clearenvvalues") == 0)
 	{
  		if (strcmp(argv[2], "yes") == 0)
@@ -512,6 +555,7 @@ int do_mplcommon(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 		set_backup_values(1);
 		return 0;
 	}
+#endif
 	printf("Usage:\n%s\n", cmdtp->usage);
 	return 1;
 }
diff --git a/board/mpl/common/flash.c b/board/mpl/common/flash.c
index 5f50200..fd43008 100644
--- a/board/mpl/common/flash.c
+++ b/board/mpl/common/flash.c
@@ -36,6 +36,8 @@
  */
 
 #include <common.h>
+
+#if !defined(CONFIG_PATI)
 #include <ppc4xx.h>
 #include <asm/processor.h>
 #include "common_util.h"
@@ -46,6 +48,9 @@
 #include "../pip405/pip405.h"
 #endif
 #include <405gp_pci.h>
+#else /* defined(CONFIG_PATI) */
+#include <mpc5xx.h>
+#endif
 
 flash_info_t	flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
 /*-----------------------------------------------------------------------
@@ -56,22 +61,15 @@ static int write_word (flash_info_t *info, ulong dest, ulong data);
 
 void unlock_intel_sectors(flash_info_t *info,ulong addr,ulong cnt);
 
-
-#ifdef CONFIG_PIP405
 #define ADDR0           0x5555
 #define ADDR1           0x2aaa
 #define FLASH_WORD_SIZE unsigned short
-#endif
-
-#ifdef CONFIG_MIP405
-#define ADDR0           0x5555
-#define ADDR1           0x2aaa
-#define FLASH_WORD_SIZE unsigned short
-#endif
 
 #define FALSE           0
 #define TRUE            1
 
+#if !defined(CONFIG_PATI)
+
 /*-----------------------------------------------------------------------
  * Some CS switching routines:
  *
@@ -151,11 +149,16 @@ void setup_cs_reloc(void)
 	}
 }
 
+#endif /* #if !defined(CONFIG_PATI) */
 
 unsigned long flash_init (void)
 {
-	unsigned long size_b0, size_b1,flashcr, size_reg;
-	int mode, i;
+	unsigned long size_b0;
+	int i;
+
+#if !defined(CONFIG_PATI)
+	unsigned long size_b1,flashcr,size_reg;
+	int mode;
 	extern char version_string;
 	char *p=&version_string;
 
@@ -169,6 +172,7 @@ unsigned long flash_init (void)
 	else
 		printf("(%s Boot) ",(mode & BOOT_MPS) ?
 			"MPS" : "Flash");
+#endif /* #if !defined(CONFIG_PATI) */
 	/* Init: no FLASHes known */
 	for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) {
 		flash_info[i].flash_id = FLASH_UNKNOWN;
@@ -190,6 +194,7 @@ unsigned long flash_init (void)
 			CFG_MONITOR_BASE+monitor_flash_len-1,
 			&flash_info[0]);
 #endif
+#if !defined(CONFIG_PATI)
 	/* protect reset vector */
 	flash_info[0].protect[flash_info[0].sector_count-1] = 1;
 	size_b1 = 0 ;
@@ -233,7 +238,7 @@ unsigned long flash_init (void)
 		mtdcr(ebccfgd, flashcr);
 	}
 #if 0
-	/* enable this if you want to test if
+	/* enable this (PIP405/MIP405 only) if you want to test if
 	   the relocation has be done ok.
 	   This will disable both Chipselects */
 	mtdcr (ebccfga, pb0cr);
@@ -250,6 +255,15 @@ unsigned long flash_init (void)
 		}
 		p++;
 	}
+#else /* #if !defined(CONFIG_PATI) */
+#ifdef	CFG_ENV_IS_IN_FLASH
+	/* ENV protection ON by default */
+	flash_protect(FLAG_PROTECT_SET,
+		      CFG_ENV_ADDR,
+		      CFG_ENV_ADDR+CFG_ENV_SECT_SIZE-1,
+		      &flash_info[0]);
+#endif
+#endif /* #if !defined(CONFIG_PATI) */
 	return (size_b0);
 }
 
diff --git a/board/mpl/pati/Makefile b/board/mpl/pati/Makefile
new file mode 100644
index 0000000..1a9ce12
--- /dev/null
+++ b/board/mpl/pati/Makefile
@@ -0,0 +1,48 @@
+#
+# (C) Copyright 2001	Wolfgang Denk, DENX Software Engineering, wd@denx.de
+#
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= lib$(BOARD).a
+
+OBJS	:=  pati.o ../common/flash.o ../common/memtst.o cmd_pati.o ../common/common_util.o
+#### cmd_pati.o
+SOBJS	:=
+
+$(LIB):	$(OBJS)
+	$(AR) crv $@ $(OBJS)
+
+clean:
+	rm -f $(SOBJS) $(OBJS)
+
+distclean:	clean
+	rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+.depend:	Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
+		$(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+
+-include .depend
+
+#########################################################################
diff --git a/board/mpl/pati/cmd_pati.c b/board/mpl/pati/cmd_pati.c
new file mode 100644
index 0000000..cdab286
--- /dev/null
+++ b/board/mpl/pati/cmd_pati.c
@@ -0,0 +1,451 @@
+/*
+ * (C) Copyright 2001
+ * Denis Peter, MPL AG Switzerland, d.peter@mpl.ch
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ * Adapted for PATI
+ */
+
+#include <common.h>
+#include <command.h>
+#define PLX9056_LOC
+#include "plx9056.h"
+#include "pati.h"
+#include "pci_eeprom.h"
+
+extern void show_pld_regs(void);
+extern int do_mplcommon(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
+
+extern void user_led0(int led_on);
+extern void user_led1(int led_on);
+
+/* ------------------------------------------------------------------------- */
+#if defined(CFG_PCI_CON_DEVICE)
+extern void pci_con_disc(void);
+extern void pci_con_connect(void);
+#endif
+
+/******************************************************************************
+ * Eeprom Support
+ ******************************************************************************/
+unsigned long get32(unsigned long addr)
+{
+	unsigned long *p=(unsigned long *)addr;
+	return *p;
+}
+
+void set32(unsigned long addr,unsigned long data)
+{
+	unsigned long *p=(unsigned long *)addr;
+	*p=data;
+}
+
+#define PCICFG_GET_REG(x)	(get32((x) + PCI_CONFIG_BASE))
+#define PCICFG_SET_REG(x,y)	(set32((x) + PCI_CONFIG_BASE,(y)))
+
+
+/******************************************************************************
+ * reload_pci_eeprom
+ ******************************************************************************/
+
+static void reload_pci_eeprom(void)
+{
+	unsigned long reg;
+	/* Set Bit 29 and clear it again */
+	reg=PCICFG_GET_REG(PCI9056_EEPROM_CTRL_STAT);
+	udelay(1);
+	/* set it*/
+	reg|=(1<<29);
+	PCICFG_SET_REG(PCI9056_EEPROM_CTRL_STAT,reg);
+	/* EECLK @ 33MHz = 125kHz
+	 * -> extra long load = 32 * 16bit = 512Bit @ 125kHz = 4.1msec
+	 * use 20msec
+	 */
+	udelay(20000); /* wait 20ms */
+	reg &= ~(1<<29); /* set it low */
+	PCICFG_SET_REG(PCI9056_EEPROM_CTRL_STAT,reg);
+	udelay(1); /* wait some time */
+}
+
+/******************************************************************************
+ * clock_pci_eeprom
+ ******************************************************************************/
+
+static void clock_pci_eeprom(void)
+{
+	unsigned long reg;
+	/* clock is low, data is valid */
+	reg=PCICFG_GET_REG(PCI9056_EEPROM_CTRL_STAT);
+	udelay(1);
+	/* set clck high */
+	reg|=(1<<24);
+	PCICFG_SET_REG(PCI9056_EEPROM_CTRL_STAT,reg);
+	udelay(1); /* wait some time */
+	reg &= ~(1<<24); /* set clock low */
+	PCICFG_SET_REG(PCI9056_EEPROM_CTRL_STAT,reg);
+	udelay(1); /* wait some time */
+}
+
+/******************************************************************************
+ * send_pci_eeprom_cmd
+ ******************************************************************************/
+static void send_pci_eeprom_cmd(unsigned long cmd, unsigned char len)
+{
+	unsigned long reg;
+	int i;
+	reg=PCICFG_GET_REG(PCI9056_EEPROM_CTRL_STAT);
+	/* Clear all EEPROM bits */
+	reg &= ~(0xF << 24);
+	/* Toggle EEPROM's Chip select to get it out of Shift Register Mode */
+	PCICFG_SET_REG(PCI9056_EEPROM_CTRL_STAT,reg);
+	udelay(1); /* wait some time */
+	/* Enable EEPROM Chip Select */
+	reg |= (1 << 25);
+	PCICFG_SET_REG(PCI9056_EEPROM_CTRL_STAT,reg);
+	/* Send EEPROM command - one bit at a time */
+	for (i = (int)(len-1); i >= 0; i--) {
+		/* Check if current bit is 0 or 1 */
+		if (cmd & (1 << i))
+			PCICFG_SET_REG(PCI9056_EEPROM_CTRL_STAT,(reg | (1<<26)));
+		else
+			PCICFG_SET_REG(PCI9056_EEPROM_CTRL_STAT,reg);
+		clock_pci_eeprom();
+	}
+}
+
+/******************************************************************************
+ * write_pci_eeprom_offs
+ ******************************************************************************/
+static void write_pci_eeprom_offs(unsigned short offset, unsigned short value)
+{
+	unsigned long reg;
+	int bitpos, cmdshft, cmdlen, timeout;
+	/* we're using the Eeprom 93CS66 */
+	cmdshft  = 2;
+	cmdlen = EE66_CMD_LEN;
+	/* Send Write_Enable command to EEPROM */
+	send_pci_eeprom_cmd((EE_WREN << cmdshft),cmdlen);
+	/* Send EEPROM Write command and offset to EEPROM */
+	send_pci_eeprom_cmd((EE_WRITE << cmdshft) | (offset / 2),cmdlen);
+	reg=PCICFG_GET_REG(PCI9056_EEPROM_CTRL_STAT);
+	/* Clear all EEPROM bits */
+	reg &= ~(0xF << 24);
+	/* Make sure EEDO Input is disabled for some PLX chips */
+	reg &= ~(1 << 31);
+	/* Enable EEPROM Chip Select */
+	reg |= (1 << 25);
+	/* Write 16-bit value to EEPROM - one bit at a time */
+	for (bitpos = 15; bitpos >= 0; bitpos--) {
+		/* Get bit value and shift into result */
+		if (value & (1 << bitpos))
+			PCICFG_SET_REG(PCI9056_EEPROM_CTRL_STAT,(reg | (1<<26)));
+		else
+			PCICFG_SET_REG(PCI9056_EEPROM_CTRL_STAT,reg );
+		clock_pci_eeprom();
+	} /* for */
+	/* Deselect Chip */
+	PCICFG_SET_REG(PCI9056_EEPROM_CTRL_STAT,reg & ~(1 << 25));
+	/* Re-select Chip */
+	PCICFG_SET_REG(PCI9056_EEPROM_CTRL_STAT,reg | (1 << 25));
+	/* A small delay is needed to let EEPROM complete */
+	timeout = 0;
+	do {
+		udelay(10);
+		reg=PCICFG_GET_REG(PCI9056_EEPROM_CTRL_STAT);
+		timeout++;
+	} while (((reg & (1 << 27)) == 0) && timeout < 20000);
+	/* Send Write_Disable command to EEPROM */
+	send_pci_eeprom_cmd((EE_WDS << cmdshft),cmdlen);
+	/* Clear Chip Select and all other EEPROM bits */
+	PCICFG_SET_REG(PCI9056_EEPROM_CTRL_STAT,reg & ~(0xF << 24));
+}
+
+
+/******************************************************************************
+ * read_pci_eeprom_offs
+ ******************************************************************************/
+static void read_pci_eeprom_offs(unsigned short offset, unsigned short *pvalue)
+{
+	unsigned long reg;
+	int bitpos, cmdshft, cmdlen;
+	/* we're using the Eeprom 93CS66 */
+	cmdshft  = 2;
+	cmdlen = EE66_CMD_LEN;
+	/* Send EEPROM read command and offset to EEPROM */
+	send_pci_eeprom_cmd((EE_READ << cmdshft) | (offset / 2),cmdlen);
+	/* Set EEPROM write output bit */
+	reg=PCICFG_GET_REG(PCI9056_EEPROM_CTRL_STAT);
+	/* Set EEDO Input enable */
+	reg |= (1 << 31);
+	PCICFG_SET_REG(PCI9056_EEPROM_CTRL_STAT,reg | (1 << 26));
+	/* Get 16-bit value from EEPROM - one bit at a time */
+	for (bitpos = 0; bitpos < 16; bitpos++) {
+		clock_pci_eeprom();
+		udelay(10);
+		reg=PCICFG_GET_REG(PCI9056_EEPROM_CTRL_STAT);
+		/* Get bit value and shift into result */
+		if (reg & (1 << 27))
+			*pvalue = (unsigned short)((*pvalue << 1) | 1);
+		else
+			*pvalue = (unsigned short)(*pvalue << 1);
+	}
+	/* Clear EEDO Input enable */
+	reg &= ~(1 << 31);
+	/* Clear Chip Select and all other EEPROM bits */
+	PCICFG_SET_REG(PCI9056_EEPROM_CTRL_STAT,reg & ~(0xF << 24));
+}
+
+
+/******************************************************************************
+ * EEPROM read/writes
+******************************************************************************/
+
+#undef EEPROM_DBG
+static int pati_pci_eeprom_erase(void)
+{
+	int i;
+	printf("Erasing EEPROM ");
+	for( i=0; i < PATI_EEPROM_LAST_OFFSET; i+=2) {
+		write_pci_eeprom_offs(i,0xffff);
+		if((i%0x10))
+			printf(".");
+	}
+	printf("\nDone\n");
+	return 0;
+}
+
+static int pati_pci_eeprom_prg(void)
+{
+	int i;
+	i=0;
+	printf("Programming EEPROM ");
+	while(pati_eeprom[i].offset<0xffff) {
+		write_pci_eeprom_offs(pati_eeprom[i].offset,pati_eeprom[i].value);
+		#ifdef EEPROM_DBG
+		printf("0x%04X: 0x%04X\n",pati_eeprom[i].offset, pati_eeprom[i].value);
+		#else
+		if((i%0x10))
+			printf(".");
+		#endif
+		i++;
+	}
+	printf("\nDone\n");
+	return 0;
+}
+
+static int pati_pci_eeprom_write(unsigned short offset, unsigned long addr, unsigned short size)
+{
+	int i;
+	unsigned short value;
+	unsigned short *buffer =(unsigned short *)addr;
+	if((offset + size) > PATI_EEPROM_LAST_OFFSET) {
+		size = PATI_EEPROM_LAST_OFFSET - offset;
+	}
+	printf("Write To EEPROM from 0x%lX to 0x%X 0x%X words\n", addr, offset, size/2);
+	for( i = offset; i< (offset + size); i+=2) {
+		value = *buffer++;
+		write_pci_eeprom_offs(i,value);
+		#ifdef EEPROM_DBG
+		printf("0x%04X: 0x%04X\n",i, value);
+		#else
+		if((i%0x10))
+			printf(".");
+		#endif
+	}
+	printf("\nDone\n");
+	return 0;
+}
+
+static int pati_pci_eeprom_read(unsigned short offset, unsigned long addr, unsigned short size)
+{
+	int i;
+	unsigned short value;
+	unsigned short *buffer =(unsigned short *)addr;
+	if((offset + size) > PATI_EEPROM_LAST_OFFSET) {
+		size = PATI_EEPROM_LAST_OFFSET - offset;
+	}
+	printf("Read from EEPROM from 0x%X to 0x%lX 0x%X words\n", offset, addr, size/2);
+	for( i = offset; i< (offset + size); i+=2) {
+		read_pci_eeprom_offs(i,&value);
+		*buffer++=value;
+		#ifdef EEPROM_DBG
+		printf("0x%04X: 0x%04X\n",i, value);
+		#else
+		if((i%0x10))
+			printf(".");
+		#endif
+	}
+	printf("\nDone\n");
+	return 0;
+}
+
+
+
+/******************************************************************************
+ * PCI Bridge Registers Dump
+*******************************************************************************/
+static void display_pci_regs(void)
+{
+	printf(" PCI9056_SPACE0_RANGE     %08lX\n",PCICFG_GET_REG(PCI9056_SPACE0_RANGE));
+	printf(" PCI9056_SPACE0_REMAP     %08lX\n",PCICFG_GET_REG(PCI9056_SPACE0_REMAP));
+	printf(" PCI9056_LOCAL_DMA_ARBIT  %08lX\n",PCICFG_GET_REG(PCI9056_LOCAL_DMA_ARBIT));
+	printf(" PCI9056_ENDIAN_DESC      %08lX\n",PCICFG_GET_REG(PCI9056_ENDIAN_DESC));
+	printf(" PCI9056_EXP_ROM_RANGE    %08lX\n",PCICFG_GET_REG(PCI9056_EXP_ROM_RANGE));
+	printf(" PCI9056_EXP_ROM_REMAP    %08lX\n",PCICFG_GET_REG(PCI9056_EXP_ROM_REMAP));
+	printf(" PCI9056_SPACE0_ROM_DESC  %08lX\n",PCICFG_GET_REG(PCI9056_SPACE0_ROM_DESC));
+	printf(" PCI9056_DM_RANGE         %08lX\n",PCICFG_GET_REG(PCI9056_DM_RANGE));
+	printf(" PCI9056_DM_MEM_BASE      %08lX\n",PCICFG_GET_REG(PCI9056_DM_MEM_BASE));
+	printf(" PCI9056_DM_IO_BASE       %08lX\n",PCICFG_GET_REG(PCI9056_DM_IO_BASE));
+	printf(" PCI9056_DM_PCI_MEM_REMAP %08lX\n",PCICFG_GET_REG(PCI9056_DM_PCI_MEM_REMAP));
+	printf(" PCI9056_DM_PCI_IO_CONFIG %08lX\n",PCICFG_GET_REG(PCI9056_DM_PCI_IO_CONFIG));
+	printf(" PCI9056_SPACE1_RANGE     %08lX\n",PCICFG_GET_REG(PCI9056_SPACE1_RANGE));
+	printf(" PCI9056_SPACE1_REMAP     %08lX\n",PCICFG_GET_REG(PCI9056_SPACE1_REMAP));
+	printf(" PCI9056_SPACE1_DESC      %08lX\n",PCICFG_GET_REG(PCI9056_SPACE1_DESC));
+	printf(" PCI9056_DM_DAC           %08lX\n",PCICFG_GET_REG(PCI9056_DM_DAC));
+	printf(" PCI9056_MAILBOX0         %08lX\n",PCICFG_GET_REG(PCI9056_MAILBOX0));
+	printf(" PCI9056_MAILBOX1         %08lX\n",PCICFG_GET_REG(PCI9056_MAILBOX1));
+	printf(" PCI9056_MAILBOX2         %08lX\n",PCICFG_GET_REG(PCI9056_MAILBOX2));
+	printf(" PCI9056_MAILBOX3         %08lX\n",PCICFG_GET_REG(PCI9056_MAILBOX3));
+	printf(" PCI9056_MAILBOX4         %08lX\n",PCICFG_GET_REG(PCI9056_MAILBOX4));
+	printf(" PCI9056_MAILBOX5         %08lX\n",PCICFG_GET_REG(PCI9056_MAILBOX5));
+	printf(" PCI9056_MAILBOX6         %08lX\n",PCICFG_GET_REG(PCI9056_MAILBOX6));
+	printf(" PCI9056_MAILBOX7         %08lX\n",PCICFG_GET_REG(PCI9056_MAILBOX7));
+	printf(" PCI9056_PCI_TO_LOC_DBELL %08lX\n",PCICFG_GET_REG(PCI9056_PCI_TO_LOC_DBELL));
+	printf(" PCI9056_LOC_TO_PCI_DBELL %08lX\n",PCICFG_GET_REG(PCI9056_LOC_TO_PCI_DBELL));
+	printf(" PCI9056_INT_CTRL_STAT    %08lX\n",PCICFG_GET_REG(PCI9056_INT_CTRL_STAT));
+	printf(" PCI9056_EEPROM_CTRL_STAT %08lX\n",PCICFG_GET_REG(PCI9056_EEPROM_CTRL_STAT));
+	printf(" PCI9056_PERM_VENDOR_ID   %08lX\n",PCICFG_GET_REG(PCI9056_PERM_VENDOR_ID));
+	printf(" PCI9056_REVISION_ID      %08lX\n",PCICFG_GET_REG(PCI9056_REVISION_ID));
+	printf(" \n");
+	printf(" PCI9056_VENDOR_ID        %08lX\n",PCICFG_GET_REG(PCI9056_VENDOR_ID));
+	printf(" PCI9056_COMMAND          %08lX\n",PCICFG_GET_REG(PCI9056_COMMAND));
+	printf(" PCI9056_REVISION         %08lX\n",PCICFG_GET_REG(PCI9056_REVISION));
+	printf(" PCI9056_CACHE_SIZE       %08lX\n",PCICFG_GET_REG(PCI9056_CACHE_SIZE));
+	printf(" PCI9056_RTR_BASE         %08lX\n",PCICFG_GET_REG(PCI9056_RTR_BASE));
+	printf(" PCI9056_RTR_IO_BASE      %08lX\n",PCICFG_GET_REG(PCI9056_RTR_IO_BASE));
+	printf(" PCI9056_LOCAL_BASE0      %08lX\n",PCICFG_GET_REG(PCI9056_LOCAL_BASE0));
+	printf(" PCI9056_LOCAL_BASE1      %08lX\n",PCICFG_GET_REG(PCI9056_LOCAL_BASE1));
+	printf(" PCI9056_UNUSED_BASE1     %08lX\n",PCICFG_GET_REG(PCI9056_UNUSED_BASE1));
+	printf(" PCI9056_UNUSED_BASE2     %08lX\n",PCICFG_GET_REG(PCI9056_UNUSED_BASE2));
+	printf(" PCI9056_CIS_PTR          %08lX\n",PCICFG_GET_REG(PCI9056_CIS_PTR));
+	printf(" PCI9056_SUB_ID           %08lX\n",PCICFG_GET_REG(PCI9056_SUB_ID));
+	printf(" PCI9056_EXP_ROM_BASE     %08lX\n",PCICFG_GET_REG(PCI9056_EXP_ROM_BASE));
+	printf(" PCI9056_CAP_PTR          %08lX\n",PCICFG_GET_REG(PCI9056_CAP_PTR));
+	printf(" PCI9056_INT_LINE         %08lX\n",PCICFG_GET_REG(PCI9056_INT_LINE));
+	printf(" PCI9056_PM_CAP_ID        %08lX\n",PCICFG_GET_REG(PCI9056_PM_CAP_ID));
+	printf(" PCI9056_PM_CSR           %08lX\n",PCICFG_GET_REG(PCI9056_PM_CSR));
+	printf(" PCI9056_HS_CAP_ID        %08lX\n",PCICFG_GET_REG(PCI9056_HS_CAP_ID));
+	printf(" PCI9056_VPD_CAP_ID       %08lX\n",PCICFG_GET_REG(PCI9056_VPD_CAP_ID));
+	printf(" PCI9056_VPD_DATA         %08lX\n",PCICFG_GET_REG(PCI9056_VPD_DATA));
+}
+
+
+int do_pati(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+	if (strcmp(argv[1], "info") == 0)
+	{
+		show_pld_regs();
+	 	return 0;
+	}
+	if (strcmp(argv[1], "pci") == 0)
+	{
+		display_pci_regs();
+	 	return 0;
+	}
+	if (strcmp(argv[1], "led") == 0)
+	{
+		int led_nr,led_on;
+		led_nr = (int)simple_strtoul(argv[2], NULL, 10);
+		led_on = (int)simple_strtoul(argv[3], NULL, 10);
+		if(!led_nr)
+			user_led0(led_on);
+		else
+			user_led1(led_on);
+		return 0;
+   	}
+#if defined(CFG_PCI_CON_DEVICE)
+	if (strcmp(argv[1], "con") == 0) {
+		pci_con_connect();
+		return 0;
+	}
+	if (strcmp(argv[1], "disc") == 0) {
+		pci_con_disc();
+		return 0;
+	}
+#endif
+	if (strcmp(argv[1], "eeprom") == 0) {
+		unsigned long addr;
+		int size, offset;
+		offset = 0;
+		size = PATI_EEPROM_LAST_OFFSET;
+		if(argc>2) {
+			if(argc>3) {
+				addr = simple_strtoul(argv[3], NULL, 16);
+				if(argc>4)
+					offset = (int) simple_strtoul(argv[4], NULL, 16);
+				if(argc>5)
+					size = (int) simple_strtoul(argv[5], NULL, 16);
+				if (strcmp(argv[2], "read") == 0) {
+					return (pati_pci_eeprom_read(offset, addr, size));
+				}
+				if (strcmp(argv[2], "write") == 0) {
+					return (pati_pci_eeprom_write(offset, addr, size));
+				}
+			}
+			if (strcmp(argv[2], "prg") == 0) {
+				return (pati_pci_eeprom_prg());
+			}
+			if (strcmp(argv[2], "era") == 0) {
+				return (pati_pci_eeprom_erase());
+			}
+			if (strcmp(argv[2], "reload") == 0) {
+				reload_pci_eeprom();
+				return 0;
+			}
+
+
+		}
+	}
+
+	return (do_mplcommon(cmdtp, flag, argc, argv));
+}
+
+U_BOOT_CMD(
+	pati,	8,	1,	do_pati,
+	"pati    - PATI specific Cmds\n",
+	"info - displays board information\n"
+	"pati pci  - displays PCI registers\n"
+	"pati led <nr> <on> \n"
+	"          - switch LED <nr> <on>\n"
+	"pati flash mem [SrcAddr]\n"
+	"          - updates U-Boot with image in memory\n"
+	"pati eeprom <cmd> - PCI EEPROM sub-system\n"
+	"    read <addr> <offset> <size>\n"
+	"          - read PCI EEPROM to <addr> from <offset> <size> words\n"
+	"    write <addr> <offset> <size>\n"
+	"          - write PCI EEPROM from <addr> to <offset> <size> words\n"
+	"    prg   - programm PCI EEPROM with default values\n"
+	"    era   - erase PCI EEPROM (write all word to 0xffff)\n"
+	"    reload- Reload PCI Bridge with EEPROM Values\n"
+	"    NOTE: <addr> must start on word boundary\n"
+	"          <offset> and <size> must be even byte values\n"
+);
+
+/* ------------------------------------------------------------------------- */
diff --git a/board/mpl/pati/config.mk b/board/mpl/pati/config.mk
new file mode 100644
index 0000000..b8a0985
--- /dev/null
+++ b/board/mpl/pati/config.mk
@@ -0,0 +1,31 @@
+#
+# (C) Copyright 2003
+# Martin Winistoerfer, martinwinistoerfer@gmx.ch.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+#
+# EPQ Board Configuration
+#
+
+# Boot from flash at location 0x00000000
+TEXT_BASE = 0xFFF00000
+
+PLATFORM_CPPFLAGS += -DTEXT_BASE=$(TEXT_BASE) -I$(TOPDIR)
diff --git a/board/mpl/pati/pati.c b/board/mpl/pati/pati.c
new file mode 100644
index 0000000..0355b65
--- /dev/null
+++ b/board/mpl/pati/pati.c
@@ -0,0 +1,618 @@
+/*
+ * (C) Copyright 2003
+ * Martin Winistoerfer, martinwinistoerfer@gmx.ch.
+ * Atapted for PATI
+ * Denis Peter, d.peter@mpl.ch
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/***********************************************************************************
+ * Bits for the SDRAM controller
+ * -----------------------------
+ *
+ * CAL:	CAS Latency. If cleared to 0 (default) the SDRAM controller asserts TA# on
+ *	the 2nd Clock after ACTIVE command (CAS Latency = 2). If set to 1 the SDRAM
+ *	controller asserts TA# on the 3rd Clock after ACTIVE command (CAS Latency = 3).
+ * RCD:	RCD ACTIVE to READ or WRITE Delay (Ras to Cas Delay). If cleared 0 (default)
+ *	tRCD of the SDRAM must equal or less 25ns. If set to 1 tRCD must be equal or less 50ns.
+ * WREC:Write Recovery. If cleared 0 (default) tWR of the SDRAM must equal or less 25ns.
+ *	If set to 1 tWR must be equal or less 50ns.
+ * RP:	Precharge Command Time. If cleared 0 (default) tRP of the SDRAM must equal or less
+ *	25ns. If set to 1 tRP must be equal or less 50ns.
+ * RC:	Auto Refresh to Active Time. If cleared 0 (default) tRC of the SDRAM must equal
+ *	or less 75ns. If set to 1 tRC must be equal or less 100ns.
+ * LMR:	Bit to set the Mode Register of the SDRAM. If set, the next access to the SDRAM
+ *	is the Load Mode Register Command.
+ * IIP:	Init in progress. Set to 1 for starting the init sequence
+ *	(Precharge All). As long this bit is set, the Precharge All is still in progress.
+ *	After command has completed, wait at least for 8 refresh (200usec) before proceed.
+ **********************************************************************************/
+
+#include <common.h>
+#include <mpc5xx.h>
+#include <devices.h>
+#include <pci_ids.h>
+#define PLX9056_LOC
+#include "plx9056.h"
+#include "pati.h"
+
+#if defined(__APPLE__)
+/* Leading underscore on symbols */
+#  define SYM_CHAR "_"
+#else /* No leading character on symbols */
+#  define SYM_CHAR
+#endif
+
+#undef SDRAM_DEBUG
+/*
+ * Macros to generate global absolutes.
+ */
+#define GEN_SYMNAME(str) SYM_CHAR #str
+#define GEN_VALUE(str) #str
+#define GEN_ABS(name, value) \
+		asm (".globl " GEN_SYMNAME(name)); \
+		asm (GEN_SYMNAME(name) " = " GEN_VALUE(value))
+
+
+/************************************************************************
+ * Early debug routines
+ */
+void write_hex (unsigned char i)
+{
+	char cc;
+
+	cc = i >> 4;
+	cc &= 0xf;
+	if (cc > 9)
+		serial_putc (cc + 55);
+	else
+		serial_putc (cc + 48);
+	cc = i & 0xf;
+	if (cc > 9)
+		serial_putc (cc + 55);
+	else
+		serial_putc (cc + 48);
+}
+
+#if defined(SDRAM_DEBUG)
+
+void write_4hex (unsigned long val)
+{
+	write_hex ((unsigned char) (val >> 24));
+	write_hex ((unsigned char) (val >> 16));
+	write_hex ((unsigned char) (val >> 8));
+	write_hex ((unsigned char) val);
+}
+
+#endif
+
+unsigned long in32(unsigned long addr)
+{
+	unsigned long *p=(unsigned long *)addr;
+	return *p;
+}
+
+void out32(unsigned long addr,unsigned long data)
+{
+	unsigned long *p=(unsigned long *)addr;
+	*p=data;
+}
+
+typedef struct {
+	unsigned short boardtype; /* Board revision and Population Options */
+	unsigned char cal;		/* cas Latency  0:CAL=2 1:CAL=3 */
+	unsigned char rcd;		/* ras to cas delay  0:<25ns 1:<50ns*/
+	unsigned char wrec;		/* write recovery 0:<25ns 1:<50ns */
+	unsigned char pr;		/* Precharge Command Time 0:<25ns 1:<50ns */
+	unsigned char rc;		/* Auto Refresh to Active Time 0:<75ns 1:<100ns */
+	unsigned char sz;		/* log binary => Size = (4MByte<<sz) 5 = 128, 4 = 64, 3 = 32, 2 = 16, 1=8 */
+} sdram_t;
+
+const sdram_t sdram_table[] = {
+	{ 0x0000,	/* PATI Rev A, 16MByte -1 Board */
+		1,	/* Case Latenty = 3 */
+		0,	/* ras to cas delay  0 (20ns) */
+		0,	/* write recovery 0:<25ns 1:<50ns*/
+		0,	/* Precharge Command Time 0 (20ns) */
+		0,	/* Auto Refresh to Active Time 0 (68) */
+		2	/* log binary => Size 2 = 16MByte, 1=8 */
+	},
+	{ 0xffff, /* terminator */
+	  0xff,
+	  0xff,
+	  0xff,
+	  0xff,
+	  0xff,
+	  0xff }
+};
+
+
+extern int mem_test (unsigned long start, unsigned long ramsize, int quiet);
+extern void mem_test_reloc(void);
+
+/*
+ * Get RAM size.
+ */
+long int initdram(int board_type)
+{
+	unsigned char board_rev;
+	unsigned long reg;
+	unsigned long lmr;
+	int i,timeout;
+
+#if defined(SDRAM_DEBUG)
+	reg=in32(PLD_CONFIG_BASE+PLD_PART_ID);
+	puts("\n\nSYSTEM part 0x"); write_4hex(SYSCNTR_PART(reg));
+	puts(" Vers 0x"); write_4hex(SYSCNTR_ID(reg));
+	puts("\nSDRAM  part  0x"); write_4hex(SDRAM_PART(reg));
+	puts(" Vers 0x"); write_4hex(SDRAM_ID(reg));
+	reg=in32(PLD_CONFIG_BASE+PLD_BOARD_TIMING);
+	puts("\nBoard rev.   0x"); write_4hex(SYSCNTR_BREV(reg));
+   putc('\n');
+#endif
+	reg=in32(PLD_CONFIG_BASE+PLD_BOARD_TIMING);
+	board_rev=(unsigned char)(SYSCNTR_BREV(reg));
+	i=0;
+	while(1) {
+		if(sdram_table[i].boardtype==0xffff) {
+			puts("ERROR, found no table for Board 0x");
+			write_hex(board_rev);
+			while(1);
+		}
+		if(sdram_table[i].boardtype==(unsigned char)board_rev)
+			break;
+		i++;
+	}
+	/* Set CAL, RCD, WREQ, PR and RC Bits */
+#if defined(SDRAM_DEBUG)
+	puts("Set CAL, RCD, WREQ, PR and RC Bits\n");
+#endif
+	/* mask bits */
+	reg &= ~(SET_REG_BIT(1,SDRAM_CAL) | SET_REG_BIT(1,SDRAM_RCD) | SET_REG_BIT(1,SDRAM_WREQ) |
+				SET_REG_BIT(1,SDRAM_PR)  |  SET_REG_BIT(1,SDRAM_RC) | SET_REG_BIT(1,SDRAM_LMR)  |
+				SET_REG_BIT(1,SDRAM_IIP) | SET_REG_BIT(1,SDRAM_RES0));
+	/* set bits */
+	reg |= (SET_REG_BIT(sdram_table[i].cal,SDRAM_CAL) |
+			  SET_REG_BIT(sdram_table[i].rcd,SDRAM_RCD) |
+			  SET_REG_BIT(sdram_table[i].wrec,SDRAM_WREQ) |
+			  SET_REG_BIT(sdram_table[i].pr,SDRAM_PR) |
+			  SET_REG_BIT(sdram_table[i].rc,SDRAM_RC));
+
+	out32(PLD_CONFIG_BASE+PLD_BOARD_TIMING,reg);
+	/* step 2 set IIP */
+#if defined(SDRAM_DEBUG)
+	puts("step 2 set IIP\n");
+#endif
+	/* step 2 set IIP */
+	reg |= SET_REG_BIT(1,SDRAM_IIP);
+	timeout=0;
+	while (timeout!=0xffff) {
+		__asm__ volatile("eieio");
+		reg=in32(PLD_CONFIG_BASE+PLD_BOARD_TIMING);
+		if((reg & SET_REG_BIT(1,SDRAM_IIP))==0)
+			break;
+		timeout++;
+		udelay(1);
+	}
+	/* wait for at least 8 refresh */
+	udelay(1000);
+	/* set LMR */
+	reg |= SET_REG_BIT(1,SDRAM_LMR);
+	out32(PLD_CONFIG_BASE+PLD_BOARD_TIMING,reg);
+	__asm__ volatile("eieio");
+	lmr=0x00000002; /* sequential burst 4 data */
+	if(sdram_table[i].cal==1)
+		lmr|=0x00000030; /* cal = 3 */
+	else
+		lmr|=0000000020; /* cal = 2 */
+	/* rest standard operation programmed write burst length */
+	/* we have a x32 bit bus to the SDRAM, so shift the addr with 2 */
+	lmr<<=2;
+	in32(CFG_SDRAM_BASE + lmr);
+	/* ok, we're done, return SDRAM size */
+	return ((0x400000 << sdram_table[i].sz));		/* log2 value of 4MByte  */
+}
+
+
+void set_flash_vpp(int ext_vpp, int ext_wp, int int_vpp)
+{
+	unsigned long reg;
+	reg=in32(PLD_CONF_REG2+PLD_CONFIG_BASE);
+	reg &= ~(SET_REG_BIT(1,SYSCNTR_CPU_VPP) |
+			   SET_REG_BIT(1,SYSCNTR_FL_VPP) |
+				SET_REG_BIT(1,SYSCNTR_FL_WP));
+
+	reg |= (SET_REG_BIT(int_vpp,SYSCNTR_CPU_VPP) |
+			   SET_REG_BIT(ext_vpp,SYSCNTR_FL_VPP) |
+				SET_REG_BIT(ext_wp,SYSCNTR_FL_WP));
+	out32(PLD_CONF_REG2+PLD_CONFIG_BASE,reg);
+	udelay(100);
+}
+
+
+void show_pld_regs(void)
+{
+	unsigned long reg,reg1;
+	reg=in32(PLD_CONFIG_BASE+PLD_PART_ID);
+	printf("\nSYSTEM part %ld, Vers %ld\n",SYSCNTR_PART(reg),SYSCNTR_ID(reg));
+	printf("SDRAM  part %ld, Vers %ld\n",SDRAM_PART(reg),SDRAM_ID(reg));
+	reg=in32(PLD_CONFIG_BASE+PLD_BOARD_TIMING);
+	printf("Board rev.  %c\n",(char) (SYSCNTR_BREV(reg)+'A'));
+	printf("Waitstates  %ld\n",GET_SYSCNTR_FLWAIT(reg));
+	printf("SDRAM:      CAL=%ld RCD=%ld WREQ=%ld PR=%ld\n            RC=%ld  LMR=%ld IIP=%ld\n",
+		GET_REG_BIT(reg,SDRAM_CAL),GET_REG_BIT(reg,SDRAM_RCD),
+		GET_REG_BIT(reg,SDRAM_WREQ),GET_REG_BIT(reg,SDRAM_PR),
+		GET_REG_BIT(reg,SDRAM_RC),GET_REG_BIT(reg,SDRAM_LMR),
+		GET_REG_BIT(reg,SDRAM_IIP));
+	reg=in32(PLD_CONFIG_BASE+PLD_CONF_REG1);
+	reg1=in32(PLD_CONFIG_BASE+PLD_CONF_REG2);
+	printf("HW Config:  FLAG=%ld IP=%ld  index=%ld PRPM=%ld\n            ICW=%ld  ISB=%ld BDIS=%ld  PCIM=%ld\n",
+		GET_REG_BIT(reg,SYSCNTR_FLAG),GET_REG_BIT(reg,SYSCNTR_IP),
+		GET_SYSCNTR_BOOTIND(reg),GET_REG_BIT(reg,SYSCNTR_PRM),
+		GET_REG_BIT(reg,SYSCNTR_ICW),GET_SYSCNTR_ISB(reg),
+		GET_REG_BIT(reg1,SYSCNTR_BDIS),GET_REG_BIT(reg1,SYSCNTR_PCIM));
+	printf("Switches:   MUX=%ld PCI_DIS=%ld Boot_EN=%ld  Config=%ld\n",GET_SDRAM_MUX(reg),
+		GET_REG_BIT(reg,SDRAM_PDIS),GET_REG_BIT(reg1,SYSCNTR_BOOTEN),
+		GET_SYSCNTR_CFG(reg1));
+	printf("Misc:       RIP=%ld CPU_VPP=%ld FLSH_VPP=%ld FLSH_WP=%ld\n\n",
+		GET_REG_BIT(reg,SDRAM_RIP),GET_REG_BIT(reg1,SYSCNTR_CPU_VPP),
+		GET_REG_BIT(reg1,SYSCNTR_FL_VPP),GET_REG_BIT(reg1,SYSCNTR_FL_WP));
+}
+
+
+/****************************************************************
+ * Setting IOs
+ * -----------
+ * GPIO6 is User LED1
+ * GPIO7 is Interrupt PLX (Output)
+ * GPIO5 is User LED0
+ * GPIO2 is PLX USERi (Output)
+ * GPIO1 is PLX Interrupt (Input)
+ ****************************************************************/
+ void init_ios(void)
+ {
+	volatile immap_t * immr = (immap_t *) CFG_IMMR;
+	volatile sysconf5xx_t *sysconf = &immr->im_siu_conf;
+	unsigned long reg;
+	reg=sysconf->sc_sgpiocr; /* Data direction register */
+	reg &= ~0x67000000;
+	reg |= 0x27000000; /* set outpupts */
+	sysconf->sc_sgpiocr=reg; /* Data direction register */
+	reg=sysconf->sc_sgpiodt2; /* Data register */
+	/* set output to 0 */
+	reg &= ~0x27000000;
+	/* set IRQ and USERi to 1 */
+	reg |= 0x28000000;
+	sysconf->sc_sgpiodt2=reg; /* Data register */
+}
+
+void user_led0(int led_on)
+{
+	volatile immap_t * immr = (immap_t *) CFG_IMMR;
+	volatile sysconf5xx_t *sysconf = &immr->im_siu_conf;
+	unsigned long reg;
+	reg=sysconf->sc_sgpiodt2; /* Data register */
+	if(led_on)	/* set output to 1 */
+		reg |= 0x04000000;
+	else
+		reg &= ~0x04000000;
+	sysconf->sc_sgpiodt2=reg; /* Data register */
+}
+
+void user_led1(int led_on)
+{
+	volatile immap_t * immr = (immap_t *) CFG_IMMR;
+	volatile sysconf5xx_t *sysconf = &immr->im_siu_conf;
+	unsigned long reg;
+	reg=sysconf->sc_sgpiodt2; /* Data register */
+	if(led_on)	/* set output to 1 */
+		reg |= 0x02000000;
+	else
+		reg &= ~0x02000000;
+	sysconf->sc_sgpiodt2=reg; /* Data register */
+}
+
+
+/****************************************************************
+ * Last Stage Init
+ ****************************************************************/
+int last_stage_init (void)
+{
+	mem_test_reloc();
+	init_ios();
+	return 0;
+}
+
+/****************************************************************
+ * Check the board
+ ****************************************************************/
+
+#define BOARD_NAME	"PATI"
+
+int checkboard (void)
+{
+	unsigned char s[50];
+	unsigned long reg;
+	char rev;
+	int i;
+
+	puts ("\nBoard: ");
+	reg=in32(PLD_CONFIG_BASE+PLD_BOARD_TIMING);
+	rev=(char)(SYSCNTR_BREV(reg)+'A');
+	i = getenv_r ("serial#", s, 32);
+	if ((i == -1)) {
+		puts ("### No HW ID - assuming " BOARD_NAME);
+		printf(" Rev. %c\n",rev);
+	}
+	else {
+		s[sizeof(BOARD_NAME)-1] = 0;
+		printf ("%s-1 Rev %c SN: %s\n", s,rev,
+				&s[sizeof(BOARD_NAME)]);
+	}
+	set_flash_vpp(1,0,0); /* set Flash VPP */
+	return 0;
+}
+
+
+#ifdef CFG_PCI_CON_DEVICE
+/************************************************************************
+ * PCI Communication
+ *
+ * Alive (Pinging):
+ * ----------------
+ * PCI Host sends message ALIVE, Local acknowledges with ALIVE
+ *
+ * PCI_CON console over PCI:
+ * -------------------------
+ * Local side:
+ *     - uses PCI9056_LOC_TO_PCI_DBELL register to signal that
+ *       data is avaible (PCIMSG_CONN)
+ *     - uses PCI9056_MAILBOX1 to send data
+ *     - uses PCI9056_MAILBOX0 to receive data
+ * PCI side:
+ *     - uses PCI9056_PCI_TO_LOC_DBELL register to signal that
+ *       data is avaible (PCIMSG_CONN)
+ *     - uses PCI9056_MAILBOX0 to send data
+ *     - uses PCI9056_MAILBOX1 to receive data
+ *
+ * How it works:
+ *     Send:
+ *     - check if PCICON_TRANSMIT_REG is empty
+ *     - write data or'ed with 0x80000000 into the PCICON_TRANSMIT_REG
+ *     - write PCIMSG_CONN into the PCICON_DBELL_REG to signal a data
+ *       is waiting
+ *     Receive:
+ *     - get an interrupt via the PCICON_ACK_REG register message
+ *       PCIMSG_CONN
+ *     - write the data from the PCICON_RECEIVE_REG into the receive
+ *       buffer and if the receive buffer is not full, clear the
+ *       PCICON_RECEIVE_REG (this allows the counterpart to write more data)
+ *     - Clear the interrupt by writing 0xFFFFFFFF to the PCICON_ACK_REG
+ *
+ *     The PCICON_RECEIVE_REG must be cleared by the routine which reads
+ *     the receive buffer if the buffer is not full any more
+ *
+ */
+
+#undef PCI_CON_DEBUG
+
+#ifdef	PCI_CON_DEBUG
+#define	PCI_CON_PRINTF(fmt,args...)	serial_printf (fmt ,##args)
+#else
+#define PCI_CON_PRINTF(fmt,args...)
+#endif
+
+
+/*********************************************************
+ * we work only with a receive buffer on eiter side.
+ * Transmit buffer is free, if mailbox is cleared.
+ * Transmit character is or'ed with 0x80000000
+ * PATI receive register MAILBOX0
+ * PATI transmit register MAILBOX1
+ *********************************************************/
+#define PCICON_RECEIVE_REG	PCI9056_MAILBOX0
+#define PCICON_TRANSMIT_REG	PCI9056_MAILBOX1
+#define PCICON_DBELL_REG	PCI9056_LOC_TO_PCI_DBELL
+#define PCICON_ACK_REG		PCI9056_PCI_TO_LOC_DBELL
+
+
+#define PCIMSG_ALIVE		0x1
+#define PCIMSG_CONN		0x2
+#define PCIMSG_DISC		0x3
+#define PCIMSG_CON_DATA	0x5
+
+
+#define PCICON_GET_REG(x)	(in32(x + PCI_CONFIG_BASE))
+#define PCICON_SET_REG(x,y)	(out32(x + PCI_CONFIG_BASE,y))
+#define PCICON_TX_FLAG		0x80000000
+
+
+#define REC_BUFFER_SIZE	0x100
+int recbuf[REC_BUFFER_SIZE];
+static int r_ptr = 0;
+int w_ptr;
+device_t pci_con_dev;
+int conn=0;
+int buff_full=0;
+
+void pci_con_put_it(const char c)
+{
+	/* Test for completition */
+	unsigned long reg;
+	do {
+		reg=PCICON_GET_REG(PCICON_TRANSMIT_REG);
+	}while(reg);
+	reg=PCICON_TX_FLAG + c;
+	PCICON_SET_REG(PCICON_TRANSMIT_REG,reg);
+	PCICON_SET_REG(PCICON_DBELL_REG,PCIMSG_CON_DATA);
+}
+
+void pci_con_putc(const char c)
+{
+	pci_con_put_it(c);
+	if(c == '\n')
+		pci_con_put_it('\r');
+}
+
+
+int pci_con_getc(void)
+{
+	int res;
+	int diff;
+	while(r_ptr==(volatile int)w_ptr);
+	res=recbuf[r_ptr++];
+	if(r_ptr==REC_BUFFER_SIZE)
+		r_ptr=0;
+	if(w_ptr<r_ptr)
+		diff=r_ptr+REC_BUFFER_SIZE-w_ptr;
+	else
+		diff=r_ptr-w_ptr;
+	if((diff<(REC_BUFFER_SIZE-4)) && buff_full) {
+   		/* clear Mail box */
+			buff_full=0;
+			PCICON_SET_REG(PCICON_RECEIVE_REG,0L);
+	}
+	return res;
+}
+
+int pci_con_tstc(void)
+{
+	if(r_ptr==(volatile int)w_ptr)
+		return 0;
+	return 1;
+}
+
+void pci_con_puts (const char *s)
+{
+	while (*s) {
+		pci_con_putc(*s);
+		++s;
+	}
+}
+
+void pci_con_init (void)
+{
+	w_ptr = 0;
+	r_ptr = 0;
+	PCICON_SET_REG(PCICON_RECEIVE_REG,0L);
+	conn=1;
+}
+
+/*******************************************
+ * IRQ routine
+ ******************************************/
+int pci_dorbell_irq(void)
+{
+	unsigned long reg,data;
+	int diff;
+	reg=PCICON_GET_REG(PCI9056_INT_CTRL_STAT);
+	PCI_CON_PRINTF(" PCI9056_INT_CTRL_STAT = %08lX\n",reg);
+	if(reg & (1<<20) ) {
+		/* read doorbell */
+		reg=PCICON_GET_REG(PCICON_ACK_REG);
+		switch(reg) {
+			case PCIMSG_ALIVE:
+				PCI_CON_PRINTF(" Alive\n");
+				PCICON_SET_REG(PCICON_DBELL_REG,PCIMSG_ALIVE);
+				break;
+			case PCIMSG_CONN:
+				PCI_CON_PRINTF(" Conn %d",conn);
+				w_ptr = 0;
+				r_ptr = 0;
+				buff_full=0;
+				PCICON_SET_REG(PCICON_RECEIVE_REG,0L);
+				conn=1;
+				PCI_CON_PRINTF(" ... %d\n",conn);
+				break;
+			case PCIMSG_CON_DATA:
+				data=PCICON_GET_REG(PCICON_RECEIVE_REG);
+				recbuf[w_ptr++]=(int)(data&0xff);
+				PCI_CON_PRINTF(" Data Console %lX, %X %d %d %X\n",data,((int)(data&0xFF)),
+					r_ptr,w_ptr,recbuf[w_ptr-1]);
+				if(w_ptr==REC_BUFFER_SIZE)
+					w_ptr=0;
+				if(w_ptr<r_ptr)
+					diff=r_ptr+REC_BUFFER_SIZE-w_ptr;
+				else
+					diff=r_ptr-w_ptr;
+				if(diff>(REC_BUFFER_SIZE-4))
+					buff_full=1;
+				else
+					/* clear Mail box */
+					PCICON_SET_REG(PCICON_RECEIVE_REG,0L);
+				break;
+			default:
+				serial_printf(" PCI9056_PCI_TO_LOC_DBELL = %08lX\n",reg);
+		}
+		/* clear IRQ */
+		PCICON_SET_REG(PCICON_ACK_REG,~0L);
+	}
+	return 0;
+}
+
+void pci_con_connect(void)
+{
+	unsigned long reg;
+	conn=0;
+	reg=PCICON_GET_REG(PCI9056_INT_CTRL_STAT);
+	/* default 0x0f010180 */
+	reg &= 0xff000000;
+	reg |= 0x00030000; /* enable local dorbell */
+	reg |= 0x00000300; /* enable PCI dorbell */
+	PCICON_SET_REG(PCI9056_INT_CTRL_STAT , reg);
+	irq_install_handler (0x2, (interrupt_handler_t *) pci_dorbell_irq,NULL);
+	memset (&pci_con_dev, 0, sizeof (pci_con_dev));
+	strcpy (pci_con_dev.name, "pci_con");
+	pci_con_dev.flags = DEV_FLAGS_OUTPUT | DEV_FLAGS_INPUT | DEV_FLAGS_SYSTEM;
+	pci_con_dev.putc = pci_con_putc;
+	pci_con_dev.puts = pci_con_puts;
+	pci_con_dev.getc = pci_con_getc;
+	pci_con_dev.tstc = pci_con_tstc;
+	device_register (&pci_con_dev);
+	printf("PATI ready for PCI connection, type ctrl-c for exit\n");
+	do {
+		udelay(10);
+		if((volatile int)conn)
+			break;
+		if(ctrlc()) {
+			irq_free_handler(0x2);
+			return;
+		}
+	}while(1);
+	console_assign(stdin,"pci_con");
+	console_assign(stderr,"pci_con");
+	console_assign(stdout,"pci_con");
+}
+
+void pci_con_disc(void)
+{
+	console_assign(stdin,"serial");
+	console_assign(stderr,"serial");
+	console_assign(stdout,"serial");
+	PCICON_SET_REG(PCICON_DBELL_REG,PCIMSG_DISC);
+	/* reconnection */
+	irq_free_handler(0x02);
+	pci_con_connect();
+}
+#endif /* #ifdef CFG_PCI_CON_DEVICE */
+
+/*
+ * Absolute environment address for linker file.
+ */
+GEN_ABS(env_start, CFG_ENV_OFFSET + CFG_FLASH_BASE);
diff --git a/board/mpl/pati/pati.h b/board/mpl/pati/pati.h
new file mode 100644
index 0000000..d521772
--- /dev/null
+++ b/board/mpl/pati/pati.h
@@ -0,0 +1,440 @@
+/*
+ * (C) Copyright 2003
+ * Denis Peter, d.peter@mpl.ch
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+/************************************************************************
+ * MACROS and register definitions for PATI Registers
+ ************************************************************************/
+#ifndef __PATI_H_
+#define __PATI_H_	1
+
+#define PLD_PART_ID		0x0
+#define PLD_BOARD_TIMING	0x4
+#define PLD_CONF_REG1		0x8
+#define PLD_CONF_REG2		0xC
+#define PLD_CONF_RES		0x10
+
+#define SET_REG_BIT(y,x) (y<<(31-x))
+#define GET_REG_BIT(y,x) ((y>>(31-x)) & 0x1L)
+
+/* SDRAM Controller PLD_PART_ID */
+/* 9  10 11 12 13 14 19 31 */
+#define SDRAM_PART3	9
+#define SDRAM_PART2	10
+#define SDRAM_PART1	11
+#define SDRAM_PART0	12
+#define SDRAM_ID3	13
+#define SDRAM_ID2	14
+#define SDRAM_ID1	19
+#define SDRAM_ID0	31
+
+#define SDRAM_PART(x)	(	\
+	(GET_REG_BIT(x,SDRAM_PART3)<<3) |\
+	(GET_REG_BIT(x,SDRAM_PART2)<<2) |\
+	(GET_REG_BIT(x,SDRAM_PART1)<<1) |\
+	(GET_REG_BIT(x,SDRAM_PART0)))
+
+#define SDRAM_ID(x)	(	\
+	(GET_REG_BIT(x,SDRAM_ID3)<<3) |\
+	(GET_REG_BIT(x,SDRAM_ID2)<<2) |\
+	(GET_REG_BIT(x,SDRAM_ID1)<<1) |\
+	(GET_REG_BIT(x,SDRAM_ID0)))
+
+/* System Controller */
+/* 0  1 3 4 5 16 20 28 29 30 */
+#define SYSCNTR_PART4	0
+#define SYSCNTR_PART3	1
+#define SYSCNTR_PART2	3
+#define SYSCNTR_PART1	4
+#define SYSCNTR_PART0	5
+#define SYSCNTR_ID4	16
+#define SYSCNTR_ID3	20
+#define SYSCNTR_ID2	28
+#define SYSCNTR_ID1	29
+#define SYSCNTR_ID0	30
+
+#define SYSCNTR_PART(x)	(	\
+	(GET_REG_BIT(x,SYSCNTR_PART4)<<4) |\
+	(GET_REG_BIT(x,SYSCNTR_PART3)<<3) |\
+	(GET_REG_BIT(x,SYSCNTR_PART2)<<2) |\
+	(GET_REG_BIT(x,SYSCNTR_PART1)<<1) |\
+	(GET_REG_BIT(x,SYSCNTR_PART0)))
+
+#define SYSCNTR_ID(x)	(	\
+	(GET_REG_BIT(x,SYSCNTR_ID4)<<4) |\
+	(GET_REG_BIT(x,SYSCNTR_ID3)<<3) |\
+	(GET_REG_BIT(x,SYSCNTR_ID2)<<2) |\
+	(GET_REG_BIT(x,SYSCNTR_ID1)<<1) |\
+	(GET_REG_BIT(x,SYSCNTR_ID0)))
+
+/* SDRAM Controller PLD_BOARD_TIMING */
+/* 9  10 11 12 13 14 19 31 */
+#define SDRAM_CAL	9
+#define SDRAM_RCD	10
+#define SDRAM_WREQ	11
+#define SDRAM_PR 	12
+#define SDRAM_RC	13
+#define SDRAM_LMR	14
+#define SDRAM_IIP	19
+#define SDRAM_RES0	31
+/* System Controller */
+/* 0  1 3 4 5 16 20 28 29 30 */
+#define SYSCNTR_BREV0	0
+#define SYSCNTR_BREV1	1
+#define SYSCNTR_BREV2	3
+#define SYSCNTR_BREV3	4
+#define SYSCNTR_RES0	5
+#define SYSCNTR_RES1	16
+#define SYSCNTR_RES2	20
+#define SYSCNTR_FLWAIT2	28
+#define SYSCNTR_FLWAIT1	29
+#define SYSCNTR_FLWAIT0	30
+
+#define SYSCNTR_BREV(x)	(	\
+	(GET_REG_BIT(x,SYSCNTR_BREV3)<<3) |\
+	(GET_REG_BIT(x,SYSCNTR_BREV2)<<2) |\
+	(GET_REG_BIT(x,SYSCNTR_BREV1)<<1) |\
+	(GET_REG_BIT(x,SYSCNTR_BREV0)))
+
+#define GET_SYSCNTR_FLWAIT(x)	(	\
+	(GET_REG_BIT(x,SYSCNTR_FLWAIT2)<<2) |\
+	(GET_REG_BIT(x,SYSCNTR_FLWAIT1)<<1) |\
+	(GET_REG_BIT(x,SYSCNTR_FLWAIT0)))
+
+#define SET_SYSCNTR_FLWAIT(x)	(	\
+	(SET_REG_BIT(((x & 0x04)!=0),SYSCNTR_FLWAIT2)) |\
+	(SET_REG_BIT(((x & 0x02)!=0)x,SYSCNTR_FLWAIT1)) |\
+	(SET_REG_BIT(((x & 0x01)!=0)x,SYSCNTR_FLWAIT0)))
+
+/* SDRAM Controller REG 2*/
+/* 9  10 11 12 13 14 19 31 */
+#define SDRAM_MUX0	9
+#define SDRAM_MUX1	10
+#define SDRAM_PDIS	11
+#define SDRAM_RES1 	12
+#define SDRAM_RES2	13
+#define SDRAM_RES3	14
+#define SDRAM_RES4	19
+#define SDRAM_RIP	31
+
+#define GET_SDRAM_MUX(x)	(	\
+	(GET_REG_BIT(x,SDRAM_MUX1)<<1)| \
+	(GET_REG_BIT(x,SDRAM_MUX0)))
+
+
+/* System Controller */
+/* 0  1 3 4 5 16 20 28 29 30 */
+#define SYSCNTR_FLAG	0
+#define SYSCNTR_IP	1
+#define SYSCNTR_BIND2	3
+#define SYSCNTR_BIND1	4
+#define SYSCNTR_BIND0	5
+#define SYSCNTR_PRM	16
+#define SYSCNTR_ICW	20
+#define SYSCNTR_ISB2	28
+#define SYSCNTR_ISB1	29
+#define SYSCNTR_ISB0	30
+
+#define GET_SYSCNTR_BOOTIND(x)	(	\
+	(GET_REG_BIT(x,SYSCNTR_BIND2)<<2) |\
+	(GET_REG_BIT(x,SYSCNTR_BIND1)<<1) |\
+	(GET_REG_BIT(x,SYSCNTR_BIND0)))
+
+#define SET_SYSCNTR_BOOTIND(x)	(	\
+	(SET_REG_BIT(((x & 0x04)!=0),SYSCNTR_BIND2)) |\
+	(SET_REG_BIT(((x & 0x02)!=0)x,SYSCNTR_BIND1))| \
+	(SET_REG_BIT(((x & 0x01)!=0)x,SYSCNTR_BIND0)))
+
+#define GET_SYSCNTR_ISB(x)	(	\
+	(GET_REG_BIT(x,SYSCNTR_ISB2)<<2)| \
+	(GET_REG_BIT(x,SYSCNTR_ISB1)<<1)| \
+	(GET_REG_BIT(x,SYSCNTR_ISB0)))
+
+#define SET_SYSCNTR_ISB(x)	(	\
+	(SET_REG_BIT(((x & 0x04)!=0),SYSCNTR_ISB2))| \
+	(SET_REG_BIT(((x & 0x02)!=0)x,SYSCNTR_ISB))| \
+	(SET_REG_BIT(((x & 0x01)!=0)x,SYSCNTR_ISB0)))
+
+/* SDRAM Controller REG 3*/
+/* 9  10 11 12 13 14 19 31 */
+#define SDRAM_RES5	9
+#define SDRAM_CFG1	10
+#define SDRAM_CFG2	11
+#define SDRAM_CFG3 	12
+#define SDRAM_RES6	13
+#define SDRAM_CFG5	14
+#define SDRAM_CFG6	19
+#define SDRAM_RES7	31
+
+#define GET_SDRAM_CFG(x)	(	\
+	(GET_REG_BIT(x,SDRAM_CFG6)<<4) |\
+	(GET_REG_BIT(x,SDRAM_CFG5)<<3) |\
+	(GET_REG_BIT(x,SDRAM_CFG3)<<2) |\
+	(GET_REG_BIT(x,SDRAM_CFG2)<<1) |\
+	(GET_REG_BIT(x,SDRAM_CFG1)))
+
+/* System Controller */
+/* 0  1 3 4 5 16 20 28 29 30 */
+#define SYSCNTR_BDIS	0
+#define SYSCNTR_PCIM	1
+#define SYSCNTR_CFG0	3
+#define SYSCNTR_CFG1	4
+#define SYSCNTR_CFG2	5
+#define SYSCNTR_CFG3	16
+#define SYSCNTR_BOOTEN	20
+#define SYSCNTR_CPU_VPP	28
+#define SYSCNTR_FL_VPP	29
+#define SYSCNTR_FL_WP	30
+
+#define GET_SYSCNTR_CFG(x)	(	\
+	(GET_REG_BIT(x,SYSCNTR_CFG3)<<3)| \
+	(GET_REG_BIT(x,SYSCNTR_CFG2)<<2)| \
+	(GET_REG_BIT(x,SYSCNTR_CFG1)<<1)| \
+	(GET_REG_BIT(x,SYSCNTR_CFG0)))
+
+
+/***************************************************************
+ * MISC Defines
+ ***************************************************************/
+
+#define PCI_VENDOR_ID_MPL 	0x18E6
+#define PCI_DEVICE_ID_PATI	0x00DA
+
+#if defined(CONFIG_MIP405)
+#define PATI_FIRMWARE_START_OFFSET	0x00300000
+#define PATI_ISO_STRING  "MEV-10084-001"
+#endif
+
+#define PATI_ENDIAN_MODE	0x3E
+
+/*******************************************
+ * PATI Mapping:
+ * -------------
+ * PCI Map:
+ * -------
+ * All addreses are mapped into the memory area
+ * (IO Area on some areas may also be possible)
+ * - pci_cfg_mem_base: fixed address to the PLX config area size 512Bytes
+ * - pci_space0_addr:  configurable
+ * - pci_space1_addr	  configurable
+ *
+ * Local Map:
+ * ----------
+ * Local addresses (Remap)
+ * - SDRAM      0x06000000 Size 16MByte mask 0xff000000
+ * - EPLD CFG   0x07000000 Size 512Bytes
+ * - FLASH      0x03000000 Size up to 8MByte
+ * - CPU        0x01000000 Size 4MByte (only accessable if special configured)
+ *
+ * Implemention:
+ * -------------
+ * To prevent using large resources reservation on the host following
+ * PCI mapping is choosed:
+ * - pci_cfg_mem_base: fixed address to the PLX config area size 512Bytes
+ * - pci_space0_addr:  configured to the EPLD Config Area size 256Bytes
+ * - pci_space1_addr:  configured to the SDRAM Area size 1MBytes, this
+ *                     space is used to switch between SDRAM, Flash and CPU
+ *
+ */
+
+/* Attribute definitions */
+#define PATI_BUS_SIZE_8		0
+#define PATI_BUS_SIZE_16	1
+#define PATI_BUS_SIZE_32	3
+
+#define PATI_SPACE0_MASK	(0xFEFFFE00)  /* Mask Attributes */
+#define PATI_SPACE1_MASK	(0x00000000)  /* Mask Attributes */
+
+#define PATI_EXTRA_LONG_EEPROM	1
+
+#define SPACE0_TA_ENABLE (1<<6)
+#define SPACE1_TA_ENABLE (1<<6)
+
+/* Config Area */
+#define PATI_LOC_CFG_ADDR		0x07000000		/* Local Address */
+#define PATI_LOC_CFG_MASK		0xFFFFFF00  		/* 256 Bytes */
+/* Attributes */
+#define PATI_LOC_CFG_BUS_SIZE		PATI_BUS_SIZE_32  	/* 32 Bit */
+#define PATI_LOC_CFG_BURST		0  			/* No Burst */
+#define PATI_LOC_CFG_NO_PREFETCH	1  			/* No Prefetch */
+#define PATI_LOC_CFG_TA_ENABLE		1 			/* Enable TA */
+
+#define PATI_LOC_CFG_SPACE0_ATTR  ( \
+		PATI_LOC_CFG_BUS_SIZE | \
+		(PATI_LOC_CFG_TA_ENABLE << 6) | \
+		(PATI_LOC_CFG_NO_PREFETCH << 8) | \
+		(PATI_LOC_CFG_BURST << 24) | \
+		(PATI_EXTRA_LONG_EEPROM << 25))
+
+/* should never be used */
+#define PATI_LOC_CFG_SPACE1_ATTR  ( \
+		PATI_LOC_CFG_BUS_SIZE | \
+		(PATI_LOC_CFG_TA_ENABLE << 6) | \
+		(PATI_LOC_CFG_NO_PREFETCH << 9) | \
+		(PATI_LOC_CFG_BURST << 8))
+
+
+/* SDRAM Area */
+#define PATI_LOC_SDRAM_ADDR		0x06000000		/* Local Address */
+#define PATI_LOC_SDRAM_MASK		0xFFF00000		/* 1MByte */
+/* Attributes */
+#define PATI_LOC_SDRAM_BUS_SIZE		PATI_BUS_SIZE_32  	/* 32 Bit */
+#define PATI_LOC_SDRAM_BURST		0  			/* No Burst */
+#define PATI_LOC_SDRAM_NO_PREFETCH	0  			/* Prefetch */
+#define PATI_LOC_SDRAM_TA_ENABLE	1  			/* Enable TA */
+
+/* should never be used */
+#define PATI_LOC_SDRAM_SPACE0_ATTR  ( \
+		PATI_LOC_SDRAM_BUS_SIZE | \
+		(PATI_LOC_SDRAM_TA_ENABLE << 6) | \
+		(PATI_LOC_SDRAM_NO_PREFETCH << 8) | \
+		(PATI_LOC_SDRAM_BURST << 24) | \
+		(PATI_EXTRA_LONG_EEPROM << 25))
+
+#define PATI_LOC_SDRAM_SPACE1_ATTR  ( \
+		PATI_LOC_SDRAM_BUS_SIZE | \
+		(PATI_LOC_SDRAM_TA_ENABLE << 6) | \
+		(PATI_LOC_SDRAM_NO_PREFETCH << 9) | \
+		(PATI_LOC_SDRAM_BURST << 8))
+
+
+/* Flash Area */
+#define PATI_LOC_FLASH_ADDR		0x03000000		/* Local Address */
+#define PATI_LOC_FLASH_MASK		0xFFF00000		/* 1MByte */
+/* Attributes */
+#define PATI_LOC_FLASH_BUS_SIZE		PATI_BUS_SIZE_16  	/* 16 Bit */
+#define PATI_LOC_FLASH_BURST		0  			/* No Burst */
+#define PATI_LOC_FLASH_NO_PREFETCH	1  			/* No Prefetch */
+#define PATI_LOC_FLASH_TA_ENABLE	1  			/* Enable TA */
+
+/* should never be used */
+#define PATI_LOC_FLASH_SPACE0_ATTR  ( \
+		PATI_LOC_FLASH_BUS_SIZE | \
+		(PATI_LOC_FLASH_TA_ENABLE << 6) | \
+		(PATI_LOC_FLASH_NO_PREFETCH << 8) | \
+		(PATI_LOC_FLASH_BURST << 24) | \
+		(PATI_EXTRA_LONG_EEPROM << 25))
+
+#define PATI_LOC_FLASH_SPACE1_ATTR  ( \
+		PATI_LOC_FLASH_BUS_SIZE | \
+		(PATI_LOC_FLASH_TA_ENABLE << 6) | \
+		(PATI_LOC_FLASH_NO_PREFETCH << 9) | \
+		(PATI_LOC_FLASH_BURST << 8))
+
+
+/* CPU Area */
+#define PATI_LOC_CPU_ADDR		0x01000000		/* Local Address */
+#define PATI_LOC_CPU_MASK		0xFFF00000		/* 1Mbyte */
+/* Attributes */
+#define PATI_LOC_CPU_BUS_SIZE		PATI_BUS_SIZE_32  	/* 32 Bit */
+#define PATI_LOC_CPU_BURST		0			/* No Burst */
+#define PATI_LOC_CPU_NO_PREFETCH	1			/* No Prefetch */
+#define PATI_LOC_CPU_TA_ENABLE		1			/* Enable TA */
+
+/* should never be used */
+#define PATI_LOC_CPU_SPACE0_ATTR  ( \
+		PATI_LOC_CPU_BUS_SIZE | \
+		(PATI_LOC_CPU_TA_ENABLE << 6) | \
+		(PATI_LOC_CPU_NO_PREFETCH << 8) | \
+		(PATI_LOC_CPU_BURST << 24) | \
+		(PATI_EXTRA_CPU_EEPROM << 25))
+
+#define PATI_LOC_CPU_SPACE1_ATTR  ( \
+		PATI_LOC_CPU_BUS_SIZE | \
+		(PATI_LOC_CPU_TA_ENABLE << 6) | \
+		(PATI_LOC_CPU_NO_PREFETCH << 9) | \
+		(PATI_LOC_CPU_BURST << 8))
+
+/***************************************************
+ * Hardware Config word definition
+ ***************************************************/
+#define BOOT_EXT_FLASH		0x00000000
+#define BOOT_INT_FLASH		0x00000004
+#define BOOT_FROM_PCI		0x00000006
+#define BOOT_FROM_SDRAM		0x00000005
+
+#define ENABLE_INT_ARB		0x00000008
+
+#define INITIAL_IRQ_PREF	0x00000010
+
+#define INITIAL_MEM_0M		0x00000000
+#define INITIAL_MEM_4M		0x00000080
+#define INITIAL_MEM_8M		0x00000040
+#define INITIAL_MEM_12M		0x000000C0
+#define INITIAL_MEM_16M		0x00000020
+#define INITIAL_MEM_20M		0x000000A0
+#define INITIAL_MEM_24M		0x00000060
+#define INITIAL_MEM_28M		0x000000E0
+/* CONF */
+#define INTERNAL_HWCONF		0x00000100
+/* PRPM */
+#define LOCAL_CPU_SLAVE		0x00000200
+/* BDIS */
+#define DISABLE_MEM_CNTR	0x00000400
+/* PCIM */
+#define PCI_MASTER_ONLY		0x00000800
+
+
+#define PATI_HW_START		((BOOT_EXT_FLASH | INITIAL_MEM_28M | INITIAL_IRQ_PREF))
+#define PATI_HW_PCI_ONLY 	((BOOT_EXT_FLASH | INITIAL_MEM_28M | INITIAL_IRQ_PREF | PCI_MASTER_ONLY))
+#define PATI_HW_CPU_ACC		((BOOT_EXT_FLASH | INITIAL_MEM_12M | INITIAL_IRQ_PREF | PCI_MASTER_ONLY))
+#define PATI_HW_CPU_SLAVE 	((BOOT_EXT_FLASH | INITIAL_MEM_12M | INITIAL_IRQ_PREF | PCI_MASTER_ONLY | LOCAL_CPU_SLAVE))
+
+/***************************************************
+ * Direct Master Config
+ ***************************************************/
+#define PATI_DMASTER_PCI_ADDR		0x01000000
+#define PATI_BUS_MASTER 1
+
+
+#define PATI_DMASTER_MASK 		0xFFF00000  /* 1MByte */
+#define PATI_DMASTER_ADDR 		0x01000000  /* Local Address */
+
+#define PATI_DMASTER_MEMORY_EN 		0x00000001 /* 0x00000001 */
+#define PATI_DMASTER_READ_AHEAD 	0x00000004 /* 0x00000004 */
+#define PATI_DMASTER_READ_NOT_AHEAD 	0x00000000 /* 0x00000004 */
+#define PATI_DMASTER_PRE_SIZE_CNTRL_0	0x00000000
+#define PATI_DMASTER_PRE_SIZE_CNTRL_4	0x00000008
+#define PATI_DMASTER_PRE_SIZE_CNTRL_8	0x00001000
+#define PATI_DMASTER_PRE_SIZE_CNTRL_16	0x00001008
+#define PATI_DMASTER_REL_PCI		0x00000000
+#define PATI_DMASTER_NOT_REL_PCI	0x00000010
+#define PATI_DMASTER_WR_INVAL		0x00000200
+#define PATI_DMASTER_NOT_WR_INVAL	0x00000000
+#define PATI_DMASTER_PRE_LIMIT		0x00000800
+#define PATI_DMASTER_PRE_CONT		0x00000000
+#define PATI_DMASTER_DELAY_WR_0		0x00000000
+#define PATI_DMASTER_DELAY_WR_4		0x00004000
+#define PATI_DMASTER_DELAY_WR_8		0x00008000
+#define PATI_DMASTER_DELAY_WR_16	0x0000C000
+
+#define PATI_DMASTER_PCI_ADDR_MASK	0xFFFF0000
+
+#define PATI_DMASTER_ATTR	\
+	PATI_DMASTER_MEMORY_EN | \
+	PATI_DMASTER_READ_AHEAD | \
+	PATI_DMASTER_PRE_SIZE_CNTRL_4 | \
+	PATI_DMASTER_REL_PCI | \
+	PATI_DMASTER_NOT_WR_INVAL | \
+	PATI_DMASTER_PRE_LIMIT | \
+	PATI_DMASTER_DELAY_WR_0
+
+
+#endif /* #ifndef __PATI_H_ */
diff --git a/board/mpl/pati/pci_eeprom.h b/board/mpl/pati/pci_eeprom.h
new file mode 100644
index 0000000..9658808
--- /dev/null
+++ b/board/mpl/pati/pci_eeprom.h
@@ -0,0 +1,91 @@
+
+#ifndef __PCI_EEPROM_H_
+#define __PCI_EEPROM_H_	1
+
+#include "pati.h"
+/******************************************************************************
+ * Eeprom Support
+ ******************************************************************************/
+/**********************************************
+*               Definitions
+**********************************************/
+#define EE46_CMD_LEN    9       /* Bits in instructions */
+#define EE56_CMD_LEN    11      /* Bits in instructions */
+#define EE66_CMD_LEN    11      /* Bits in instructions */
+#define EE_READ         0x0180  /* 01 1000 0000 read instruction */
+#define EE_WRITE        0x0140  /* 01 0100 0000 write instruction */
+#define EE_WREN         0x0130  /* 01 0011 0000 write enable instruction */
+#define EE_WRALL        0x0110  /* 01 0001 0000 write all registers */
+#define EE_PRREAD       0x0180  /* 01 1000 0000 read address stored in Protect Register */
+#define EE_PRWRITE      0x0140  /* 01 0100 0000 write the address into PR */
+#define EE_WDS          0x0100  /* 01 0000 0000 write disable instruction */
+#define EE_PREN         0x0130  /* 01 0011 0000 protect enable instruction */
+#define EE_PRCLEAR      0x01FF  /* 01 1111 1111 clear protect register instr */
+#define EE_PRDS         0x0100  /* 01 0000 0000 ONE TIME ONLY, permenant */
+
+/***************************************************
+ * EEPROM
+ ***************************************************/
+#define LOW_WORD(x)	(((x) & 0xFFFF))
+#define HIGH_WORD(x)	(((x) >> 16) & 0xFFFF)
+
+typedef struct pci_eeprom_t {
+	unsigned short offset;
+	unsigned short value;
+} pci_eeprom;
+
+static pci_eeprom pati_eeprom[] = {
+	{ 0x00,PCI_DEVICE_ID_PATI }, 	/* PCI Device ID PCIIDR[31:16] */
+	{ 0x02,PCI_VENDOR_ID_MPL }, 	/* PCI Vendor ID PCIIDR[15:0] */
+	{ 0x04,PCI_CLASS_PROCESSOR_POWERPC }, 	/* PCI Class Code PCICCR[23:8] */
+	{ 0x06,0x00BA }, 	/* PCI Class Code / PCI Revision ID PCICCR[7:0] / PCIREV[7:0] */
+	{ 0x08,0x0007 }, 	/* PCI Maximum Latency / PCI Minimum Grant PCIMLR[7:0] / PCIMGR[7:0] */
+	{ 0x0A,0x0100 }, 	/* PCI Interrupt Pin / PCI Interrupt Line PCIIPR[7:0] / PCIILR[7:0] */
+	{ 0x0C,0x0000 }, 	/* MSW of Mailbox 0 (User Defined) PCI9056_MAILBOX0[31:16] */
+	{ 0x0E,0x0000 }, 	/* LSW of Mailbox 0 (User Defined) PCI9056_MAILBOX0[15:0] */
+	{ 0x10,0x0000 }, 	/* MSW of Mailbox 1 (User Defined) PCI9056_MAILBOX1[31:16] */
+	{ 0x12,0x0000 }, 	/* LSW of Mailbox 1 (User Defined) PCI9056_MAILBOX1[15:0] */
+	{ 0x14,HIGH_WORD(PATI_LOC_CFG_MASK) }, 	/* MSW of Direct Slave Local Address Space 0 Range LAS0RR[31:16] */
+	{ 0x16,LOW_WORD(PATI_LOC_CFG_MASK) }, 	/* LSW of Direct Slave Local Address Space 0 Range LAS0RR[15:0] */
+	{ 0x18,HIGH_WORD(PATI_LOC_CFG_ADDR) }, 	/* MSW of Direct Slave Local Address Space 0 Local Base Address (Remap) LAS0BA[31:16] (CFG) */
+	{ 0x1A,LOW_WORD(PATI_LOC_CFG_ADDR)|1 }, 	/* LSW of Direct Slave Local Address Space 0 Local Base Address (Remap) LAS0BA[15:2, 0], Reserved [1] */
+	{ 0x1C,0x0000 }, 	/* MSW of Mode/DMA Arbitration MARBR[31, 29:16] or DMAARB[31, 29:16], Reserved [30] */
+	{ 0x1E,0x0000 }, 	/* LSW of Mode/DMA Arbitration MARBR[15:0] or DMAARB[15:0] */
+	{ 0x20,0x0030 }, 	/* Local Miscellaneous Control 2 / Serial EEPROM WP Addr Boundary LMISC2[5:0], Res[7:6] / PROT_AREA[6:0], Res[7] */
+	{ 0x22,0x0510 }, 	/* Local Miscellaneous Control 1 / Local Bus Big/Little Endian Descriptor LMISC1[7:0] / BIGEND[7:0] */
+	{ 0x24,0x0000 }, 	/* MSW of Direct Slave Expansion ROM Range EROMRR[31:16] */
+	{ 0x26,0x0000 }, 	/* LSW of Direct Slave Expansion ROM Range EROMRR[15:11, 0], Reserved [10:1]  */
+	{ 0x28,0x0000 }, 	/* MSW of Direct Slave Expansion ROM Local Base Address (Remap) and BREQo Control EROMBA[31:16] */
+	{ 0x2A,0x0000 }, 	/* LSW of Direct Slave Expansion ROM Local Base Address (Remap) and BREQo Control EROMBA[15:11, 5:0], Reserved [10:6] */
+	{ 0x2C,(0x4243 | HIGH_WORD((PATI_LOC_CFG_SPACE0_ATTR))) }, 	/* MSW of Local Address Space 0/Expansion ROM Bus Region Descriptor LBRD0[31:16] */
+	{ 0x2E,LOW_WORD(PATI_LOC_CFG_SPACE0_ATTR) }, 	/* LSW of Local Address Space 0/Expansion ROM Bus Region Descriptor LBRD0[15:0] */
+	{ 0x30,HIGH_WORD(PATI_DMASTER_MASK) }, 	/* MSW of Local Range for Direct Master-to-PCI DMRR[31:16] */
+	{ 0x32,LOW_WORD(PATI_DMASTER_MASK) }, 	/* LSW of Local Range for Direct Master-to-PCI (Reserved) DMRR[15:0] */
+	{ 0x34,HIGH_WORD(PATI_DMASTER_ADDR) }, 	/* MSW of Local Base Address for Direct Master-to-PCI Memory DMLBAM[31:16] */
+	{ 0x36,LOW_WORD(PATI_DMASTER_ADDR) }, 	/* LSW of Local Base Address for Direct Master-to-PCI Memory (Reserved) DMLBAM[15:0] */
+	{ 0x38,0x0000 }, 	/* MSW of Local Bus Address for Direct Master-to-PCI I/O Configuration DMLBAI[31:16] */
+	{ 0x3A,0x0000 }, 	/* LSW of Local Bus Address for Direct Master-to-PCI I/O Configuration (Reserved) DMLBAI[15:0] */
+	{ 0x3C,0x0000 }, 	/* MSW of PCI Base Address (Remap) for Direct Master-to-PCI Memory DMPBAM[31:16] */
+	{ 0x3E,0x0000 }, 	/* LSW of PCI Base Address (Remap) for Direct Master-to-PCI Memory DMPBAM[15:0] */
+	{ 0x40,0x0000 }, 	/* MSW of PCI Configuration Address for Direct Master-to-PCI I/O Configuration DMCFGA[31, 23:16] Reserved [30:24]*/
+	{ 0x42,0x0000 }, 	/* LSW of PCI Configuration Address for Direct Master-to-PCI I/O Configuration DMCFGA[15:0] */
+	{ 0x44,0x0000 }, 	/* PCI Subsystem ID PCISID[15:0] */
+	{ 0x46,0x0000 }, 	/* PCI Subsystem Vendor ID PCISVID[15:0] */
+	{ 0x48,HIGH_WORD(PATI_LOC_SDRAM_MASK) }, 	/* MSW of Direct Slave Local Address Space 1 Range (1 MB) LAS1RR[31:16] */
+	{ 0x4A,LOW_WORD(PATI_LOC_SDRAM_MASK) }, 	/* LSW of Direct Slave Local Address Space 1 Range (1 MB) LAS1RR[15:0] */
+	{ 0x4C,HIGH_WORD(PATI_LOC_SDRAM_ADDR) }, 	/* MSW of Direct Slave Local Address Space 1 Local Base Address (Remap) LAS1BA[31:16] (SDRAM) */
+	{ 0x4E,LOW_WORD(PATI_LOC_SDRAM_ADDR) | 0x1 }, 	/* LSW of Direct Slave Local Address Space 1 Local Base Address (Remap) LAS1BA[15:2, 0], Reserved [1] */
+	{ 0x50,HIGH_WORD(PATI_LOC_SDRAM_SPACE1_ATTR) }, 	/* MSW of Local Address Space 1 Bus Region Descriptor LBRD1[31:16] */
+	{ 0x52,LOW_WORD(PATI_LOC_SDRAM_SPACE1_ATTR) }, 	/* LSW of Local Address Space 1 Bus Region Descriptor (Reserved) LBRD1[15:0] */
+	{ 0x54,0x0000 }, 	/* Hot Swap Control/Status (Reserved) Reserved */
+	{ 0x56,0x0000 }, 	/* Hot Swap Next Capability Pointer / Hot Swap Control HS_NEXT[7:0] / HS_CNTL[7:0] */
+	{ 0x58,0x0000 }, 	/* Reserved Reserved */
+	{ 0x5A,0x0000 }, 	/* PCI Arbiter Control PCIARB[3:0], Reserved [15:4] */
+	{ 0x5C,0x0000 }, 	/* Power Management Capabilities PMC[15:9, 2:0] */
+	{ 0x5E,0x0000 }, 	/* Power Management Next Capability Pointer (Reserved) / Power Management Capability ID (Reserved) Reserved*/
+	{ 0x60,0x0000 }, 	/* Power Management Data / PMCSR Bridge Support Extension (Reserved) PMDATA[7:0] / Reserved */
+	{ 0x62,0x0000 }, 	/* Power Management Control/Status PMCSR[14:8] */
+	{ 0xFFFF,0xFFFF} 	/* terminaror */
+};
+#define PATI_EEPROM_LAST_OFFSET	0x64
+#endif /* #ifndef __PCI_EEPROM_H_ */
diff --git a/board/mpl/pati/plx9056.h b/board/mpl/pati/plx9056.h
new file mode 100644
index 0000000..763a793
--- /dev/null
+++ b/board/mpl/pati/plx9056.h
@@ -0,0 +1,114 @@
+/*

+ * (C) Copyright 2003

+ * Denis Peter, d.peter@mpl.ch

+ * See file CREDITS for list of people who contributed to this

+ * project.

+ *

+ * This program is free software; you can redistribute it and/or

+ * modify it under the terms of the GNU General Public License as

+ * published by the Free Software Foundation; either version 2 of

+ * the License, or (at your option) any later version.

+ *

+ * This program is distributed in the hope that it will be useful,

+ * but WITHOUT ANY WARRANTY; without even the implied warranty of

+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

+ * GNU General Public License for more details.

+ *

+ * You should have received a copy of the GNU General Public License

+ * along with this program; if not, write to the Free Software

+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,

+ * MA 02111-1307 USA

+ */

+/* PLX9096 register definitions

+*/

+#ifndef __PLX9056_H_

+#define __PLX9056_H_	1

+

+#include <pci.h>

+

+#ifdef PLX9056_LOC

+#define LOCAL_OFFSET					0x080

+/* PCI Config regs */

+#else

+#define LOCAL_OFFSET					0x000

+#endif

+

+#define PCI9056_VENDOR_ID            PCI_VENDOR_ID

+//#define PCI9656_DEVICE_ID            PCI_DEVICE_ID

+#define PCI9056_COMMAND              PCI_COMMAND

+//#define PCI9656_STATUS               PCI_STATUS

+#define PCI9056_REVISION             PCI_REVISION_ID

+

+#define PCI9056_CACHE_SIZE           PCI_CACHE_LINE_SIZE

+#define PCI9056_RTR_BASE             PCI_BASE_ADDRESS_0

+#define PCI9056_RTR_IO_BASE          PCI_BASE_ADDRESS_1

+#define PCI9056_LOCAL_BASE0          PCI_BASE_ADDRESS_2

+#define PCI9056_LOCAL_BASE1          PCI_BASE_ADDRESS_3

+#define PCI9056_UNUSED_BASE1         PCI_BASE_ADDRESS_4

+#define PCI9056_UNUSED_BASE2         PCI_BASE_ADDRESS_5

+#define PCI9056_CIS_PTR              PCI_CARDBUS_CIS

+#define PCI9056_SUB_ID               PCI_SUBSYSTEM_VENDOR_ID

+#define PCI9056_EXP_ROM_BASE         PCI_ROM_ADDRESS

+#define PCI9056_CAP_PTR              PCI_CAPABILITY_LIST

+#define PCI9056_INT_LINE             PCI_INTERRUPT_LINE

+

+#if defined(PLX9056_LOC)

+    #define PCI9056_PM_CAP_ID            0x180

+    #define PCI9056_PM_CSR               0x184

+    #define PCI9056_HS_CAP_ID            0x188

+    #define PCI9056_VPD_CAP_ID           0x18C

+    #define PCI9056_VPD_DATA             0x190

+#endif

+

+

+

+#define PCI_DEVICE_ID_PLX9056		0x9056

+

+/* Local Configuration Registers Accessible via the PCI Base address + Variable */

+#define PCI9056_SPACE0_RANGE         (0x000 + LOCAL_OFFSET)

+#define PCI9056_SPACE0_REMAP         (0x004 + LOCAL_OFFSET)

+#define PCI9056_LOCAL_DMA_ARBIT      (0x008 + LOCAL_OFFSET)

+#define PCI9056_ENDIAN_DESC          (0x00c + LOCAL_OFFSET)

+#define PCI9056_EXP_ROM_RANGE        (0x010 + LOCAL_OFFSET)

+#define PCI9056_EXP_ROM_REMAP        (0x014 + LOCAL_OFFSET)

+#define PCI9056_SPACE0_ROM_DESC      (0x018 + LOCAL_OFFSET)

+#define PCI9056_DM_RANGE             (0x01c + LOCAL_OFFSET)

+#define PCI9056_DM_MEM_BASE          (0x020 + LOCAL_OFFSET)

+#define PCI9056_DM_IO_BASE           (0x024 + LOCAL_OFFSET)

+#define PCI9056_DM_PCI_MEM_REMAP     (0x028 + LOCAL_OFFSET)

+#define PCI9056_DM_PCI_IO_CONFIG     (0x02c + LOCAL_OFFSET)

+#define PCI9056_SPACE1_RANGE         (0x0f0 + LOCAL_OFFSET)

+#define PCI9056_SPACE1_REMAP         (0x0f4 + LOCAL_OFFSET)

+#define PCI9056_SPACE1_DESC          (0x0f8 + LOCAL_OFFSET)

+#define PCI9056_DM_DAC               (0x0fc + LOCAL_OFFSET)

+

+#ifdef PLX9056_LOC

+#define PCI9056_ARBITER_CTRL         0x1A0

+#define PCI9056_ABORT_ADDRESS        0x1A4

+#endif

+

+/* Runtime registers  PCI Address + LOCAL_OFFSET */

+#ifdef PLX9056_LOC

+#define PCI9056_MAILBOX0				0x0C0

+#define PCI9056_MAILBOX1				0x0C4

+#else

+#define PCI9056_MAILBOX0				0x078

+#define PCI9056_MAILBOX1				0x07c

+#endif

+

+#define PCI9056_MAILBOX2				(0x048 + LOCAL_OFFSET)

+#define PCI9056_MAILBOX3				(0x04c + LOCAL_OFFSET)

+#define PCI9056_MAILBOX4				(0x050 + LOCAL_OFFSET)

+#define PCI9056_MAILBOX5				(0x054 + LOCAL_OFFSET)

+#define PCI9056_MAILBOX6				(0x058 + LOCAL_OFFSET)

+#define PCI9056_MAILBOX7				(0x05c + LOCAL_OFFSET)

+#define PCI9056_PCI_TO_LOC_DBELL		(0x060 + LOCAL_OFFSET)

+#define PCI9056_LOC_TO_PCI_DBELL		(0x064 + LOCAL_OFFSET)

+#define PCI9056_INT_CTRL_STAT			(0x068 + LOCAL_OFFSET)

+#define PCI9056_EEPROM_CTRL_STAT		(0x06c + LOCAL_OFFSET)

+#define PCI9056_PERM_VENDOR_ID		(0x070 + LOCAL_OFFSET)

+#define PCI9056_REVISION_ID			(0x074 + LOCAL_OFFSET)

+

+

+#endif /* #ifndef __PLX9056_H_ */

+

diff --git a/board/mpl/pati/u-boot.lds b/board/mpl/pati/u-boot.lds
new file mode 100644
index 0000000..3188801
--- /dev/null
+++ b/board/mpl/pati/u-boot.lds
@@ -0,0 +1,137 @@
+/*
+ * (C) Copyright 2001	Wolfgang Denk, DENX Software Engineering, wd@denx.de
+ * (C) Copyright 2003	Martin Winistoerfer, martinwinistoerfer@gmx.ch
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(powerpc)
+SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
+/* Do we need any of these for elf?
+   __DYNAMIC = 0;    */
+SECTIONS
+{
+  /* Read-only sections, merged into text segment: */
+  . = + SIZEOF_HEADERS;
+  .interp : { *(.interp) }
+  .hash          : { *(.hash)		}
+  .dynsym        : { *(.dynsym)		}
+  .dynstr        : { *(.dynstr)		}
+  .rel.text      : { *(.rel.text)		}
+  .rela.text     : { *(.rela.text) 	}
+  .rel.data      : { *(.rel.data)		}
+  .rela.data     : { *(.rela.data) 	}
+  .rel.rodata    : { *(.rel.rodata) 	}
+  .rela.rodata   : { *(.rela.rodata) 	}
+  .rel.got       : { *(.rel.got)		}
+  .rela.got      : { *(.rela.got)		}
+  .rel.ctors     : { *(.rel.ctors)	}
+  .rela.ctors    : { *(.rela.ctors)	}
+  .rel.dtors     : { *(.rel.dtors)	}
+  .rela.dtors    : { *(.rela.dtors)	}
+  .rel.bss       : { *(.rel.bss)		}
+  .rela.bss      : { *(.rela.bss)		}
+  .rel.plt       : { *(.rel.plt)		}
+  .rela.plt      : { *(.rela.plt)		}
+  .init          : { *(.init)	}
+  .plt : { *(.plt) }
+  .text      :
+  {
+    /* WARNING - the following is hand-optimized to fit within	*/
+    /* the sector layout of our flash chips!	XXX FIXME XXX	*/
+
+    cpu/mpc5xx/start.o	(.text)
+
+    *(.text)
+    *(.fixup)
+    *(.got1)
+  }
+  _etext = .;
+  PROVIDE (etext = .);
+  .rodata    :
+  {
+    *(.rodata)
+    *(.rodata1)
+    *(.rodata.str1.4)
+  }
+  .fini      : { *(.fini)    } =0
+  .ctors     : { *(.ctors)   }
+  .dtors     : { *(.dtors)   }
+
+  /* Read-write section, merged into data segment: */
+  . = (. + 0x00FF) & 0xFFFFFF00;
+  _erotext = .;
+  PROVIDE (erotext = .);
+  .reloc   :
+  {
+    *(.got)
+    _GOT2_TABLE_ = .;
+    *(.got2)
+    _FIXUP_TABLE_ = .;
+    *(.fixup)
+  }
+  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
+  __fixup_entries = (. - _FIXUP_TABLE_)>>2;
+
+  .data    :
+  {
+    *(.data)
+    *(.data1)
+    *(.sdata)
+    *(.sdata2)
+    *(.dynamic)
+    CONSTRUCTORS
+  }
+  _edata  =  .;
+  PROVIDE (edata = .);
+
+  __u_boot_cmd_start = .;
+  .u_boot_cmd : { *(.u_boot_cmd) }
+  __u_boot_cmd_end = .;
+
+
+  __start___ex_table = .;
+  __ex_table : { *(__ex_table) }
+  __stop___ex_table = .;
+
+  . = ALIGN(256);
+  __init_begin = .;
+  .text.init : { *(.text.init) }
+  .data.init : { *(.data.init) }
+  . = ALIGN(256);
+  __init_end = .;
+
+  __bss_start = .;
+  .bss       :
+  {
+   *(.sbss) *(.scommon)
+   *(.dynbss)
+   *(.bss)
+   *(COMMON)
+  }
+
+  _end = . ;
+  PROVIDE (end = .);
+/*   . = env_start;
+	.ppcenv	:
+	{
+		common/environment.o (.ppcenv)
+	}
+*/
+}
diff --git a/cpu/mpc5xx/Makefile b/cpu/mpc5xx/Makefile
index ee20dda..b787b61 100644
--- a/cpu/mpc5xx/Makefile
+++ b/cpu/mpc5xx/Makefile
@@ -35,7 +35,7 @@ include $(TOPDIR)/config.mk
 LIB	= lib$(CPU).a
 
 START	= start.S
-OBJS	= serial.o cpu.o cpu_init.o interrupts.o traps.o speed.o
+OBJS	= serial.o cpu.o cpu_init.o interrupts.o traps.o speed.o spi.o
 
 all:	.depend $(START) $(LIB)
 
diff --git a/cpu/mpc5xx/cpu.c b/cpu/mpc5xx/cpu.c
index cc69511..0c22a31 100644
--- a/cpu/mpc5xx/cpu.c
+++ b/cpu/mpc5xx/cpu.c
@@ -122,12 +122,30 @@ unsigned long get_tbclk (void)
 	return (oscclk / 16);
 }
 
+void dcache_enable (void)
+{
+	return;
+}
+
+void dcache_disable (void)
+{
+	return;
+}
+
+int dcache_status (void)
+{
+	return 0;	/* always off */
+}
 
 /*
  * Reset board
  */
 int do_reset (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
 {
+#if defined(CONFIG_PATI)
+	volatile ulong *addr = (ulong *) CFG_RESET_ADDRESS;
+	*addr = 1;
+#else
 	ulong addr;
 
 	/* Interrupts off, enable reset */
@@ -150,5 +168,6 @@ int do_reset (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
 	addr = CFG_MONITOR_BASE - sizeof (ulong);
 #endif
 	((void (*) (void)) addr) ();
+#endif  /* #if defined(CONFIG_PATI) */
 	return 1;
 }
diff --git a/cpu/mpc5xx/cpu_init.c b/cpu/mpc5xx/cpu_init.c
index e19d0f4..f4cd24b 100644
--- a/cpu/mpc5xx/cpu_init.c
+++ b/cpu/mpc5xx/cpu_init.c
@@ -64,6 +64,8 @@ void cpu_init_f (volatile immap_t * immr)
 	immr->im_sitk.sitk_piscrk = KAPWR_KEY;
 	immr->im_sit.sit_piscr = CFG_PISCR;
 
+#if !defined(CONFIG_PATI)
+	/* PATI sest PLL in start.S */
 	/* PLL (CPU clock) settings */
 	immr->im_clkrstk.cark_plprcrk = KAPWR_KEY;
 
@@ -81,6 +83,8 @@ void cpu_init_f (volatile immap_t * immr)
 #endif
 	immr->im_clkrst.car_plprcr = reg;
 
+#endif /* !defined(CONFIG_PATI) */
+
 	/* System integration timers. CFG_MASK has EBDF configuration */
 	immr->im_clkrstk.cark_sccrk = KAPWR_KEY;
 	reg = immr->im_clkrst.car_sccr;
diff --git a/cpu/mpc5xx/interrupts.c b/cpu/mpc5xx/interrupts.c
index 3678b5b..7f6e136 100644
--- a/cpu/mpc5xx/interrupts.c
+++ b/cpu/mpc5xx/interrupts.c
@@ -28,12 +28,20 @@
  */
 
 #include <common.h>
+#include <command.h>
 #include <mpc5xx.h>
 #include <asm/processor.h>
 
+#if defined(CONFIG_PATI)
+/* PATI uses IRQs for PCI doorbell */
+#undef NR_IRQS
+#define NR_IRQS 16
+#endif
+
 struct interrupt_action {
 	interrupt_handler_t *handler;
 	void *arg;
+	int count;
 };
 
 static struct interrupt_action irq_vecs[NR_IRQS];
@@ -45,12 +53,18 @@ static struct interrupt_action irq_vecs[NR_IRQS];
 int interrupt_init_cpu (ulong *decrementer_count)
 {
 	volatile immap_t *immr = (immap_t *) CFG_IMMR;
+	int vec;
 
 	/* Decrementer used here for status led */
 	*decrementer_count = get_tbclk () / CFG_HZ;
 
 	/* Disable all interrupts */
 	immr->im_siu_conf.sc_simask = 0;
+	for (vec=0; vec<NR_IRQS; vec++) {
+		irq_vecs[vec].handler = NULL;
+		irq_vecs[vec].arg = NULL;
+		irq_vecs[vec].count = 0;
+	}
 
 	return (0);
 }
@@ -163,3 +177,31 @@ void timer_interrupt_cpu (struct pt_regs *regs)
 
 	return;
 }
+
+#if (CONFIG_COMMANDS & CFG_CMD_IRQ)
+/*******************************************************************************
+ *
+ * irqinfo - print information about IRQs
+ *
+ */
+int do_irqinfo(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+	int vec;
+
+	printf ("\nInterrupt-Information:\n");
+	printf ("Nr  Routine   Arg       Count\n");
+
+	for (vec=0; vec<NR_IRQS; vec++) {
+		if (irq_vecs[vec].handler != NULL) {
+			printf ("%02d  %08lx  %08lx  %d\n",
+				vec,
+				(ulong)irq_vecs[vec].handler,
+				(ulong)irq_vecs[vec].arg,
+				irq_vecs[vec].count);
+		}
+	}
+	return 0;
+}
+
+
+#endif  /* CONFIG_COMMANDS & CFG_CMD_IRQ */
diff --git a/cpu/mpc5xx/spi.c b/cpu/mpc5xx/spi.c
new file mode 100644
index 0000000..797d0c9
--- /dev/null
+++ b/cpu/mpc5xx/spi.c
@@ -0,0 +1,416 @@
+/*
+ * Copyright (c) 2001 Navin Boppuri / Prashant Patel
+ *	<nboppuri@trinetcommunication.com>,
+ *	<pmpatel@trinetcommunication.com>
+ * Copyright (c) 2001 Gerd Mennchen <Gerd.Mennchen@icn.siemens.de>
+ * Copyright (c) 2001 Wolfgang Denk, DENX Software Engineering, <wd@denx.de>.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * MPC5xx CPM SPI interface.
+ *
+ * Parts of this code are probably not portable and/or specific to
+ * the board which I used for the tests. Please send fixes/complaints
+ * to wd@denx.de
+ *
+ * Ported to MPC5xx
+ * Copyright (c) 2003 Denis Peter, MPL AG Switzerland, d.petr@mpl.ch.
+ */
+
+#include <common.h>
+#include <mpc5xx.h>
+#include <asm/5xx_immap.h>
+#include <linux/ctype.h>
+#include <malloc.h>
+#include <post.h>
+#include <net.h>
+
+#if defined(CONFIG_SPI)
+
+#undef	DEBUG
+
+#define SPI_EEPROM_WREN		0x06
+#define SPI_EEPROM_RDSR		0x05
+#define SPI_EEPROM_READ		0x03
+#define SPI_EEPROM_WRITE	0x02
+
+
+#ifdef	DEBUG
+
+#define	DPRINT(a)	printf a;
+/* -----------------------------------------------
+ * Helper functions to peek into tx and rx buffers
+ * ----------------------------------------------- */
+static const char * const hex_digit = "0123456789ABCDEF";
+
+static char quickhex (int i)
+{
+	return hex_digit[i];
+}
+
+static void memdump (void *pv, int num)
+{
+	int i;
+	unsigned char *pc = (unsigned char *) pv;
+
+	for (i = 0; i < num; i++)
+		printf ("%c%c ", quickhex (pc[i] >> 4), quickhex (pc[i] & 0x0f));
+	printf ("\t");
+	for (i = 0; i < num; i++)
+		printf ("%c", isprint (pc[i]) ? pc[i] : '.');
+	printf ("\n");
+}
+#else	/* !DEBUG */
+
+#define	DPRINT(a)
+
+#endif	/* DEBUG */
+
+/* -------------------
+ * Function prototypes
+ * ------------------- */
+void spi_init (void);
+
+ssize_t spi_read (uchar *, int, uchar *, int);
+ssize_t spi_write (uchar *, int, uchar *, int);
+ssize_t spi_xfer (size_t);
+
+
+/* **************************************************************************
+ *
+ *  Function:    spi_init_f
+ *
+ *  Description: Init SPI-Controller (ROM part)
+ *
+ *  return:      ---
+ *
+ * *********************************************************************** */
+
+void spi_init_f (void)
+{
+	int i;
+
+	volatile immap_t *immr;
+	volatile qsmcm5xx_t *qsmcm;
+
+	immr = (immap_t *)  CFG_IMMR;
+	qsmcm = (qsmcm5xx_t *)&immr->im_qsmcm;
+
+	qsmcm->qsmcm_qsmcr = 0; /* all accesses enabled */
+	qsmcm->qsmcm_qspi_il = 0; /* lowest IRQ */
+
+	/* --------------------------------------------
+	 * GPIO or per. Function
+	 * PQSPAR[00] = 0 reserved
+	 * PQSPAR[01] = 1 [0x4000] -> PERI: (SPICS3)
+	 * PQSPAR[02] = 0 [0x0000] -> GPIO
+	 * PQSPAR[03] = 0 [0x0000] -> GPIO
+	 * PQSPAR[04] = 1 [0x0800] -> PERI: (SPICS0)
+	 * PQSPAR[05] = 0 reseved
+	 * PQSPAR[06] = 1 [0x0200] -> PERI: (SPIMOSI)
+	 * PQSPAR[07] = 1 [0x0100] -> PERI: (SPIMISO)
+	 * -------------------------------------------- */
+	qsmcm->qsmcm_pqspar =  0x3 | (CFG_SPI_CS_USED << 3);
+
+	 /* --------------------------------------------
+	 * DDRQS[00] = 0 reserved
+	 * DDRQS[01] = 1 [0x0040] -> SPICS3 Output
+	 * DDRQS[02] = 0 [0x0000] -> GPIO Output
+	 * DDRQS[03] = 0 [0x0000] -> GPIO Output
+	 * DDRQS[04] = 1 [0x0008] -> SPICS0 Output
+	 * DDRQS[05] = 1 [0x0004] -> SPICLK Output
+	 * DDRQS[06] = 1 [0x0002] -> SPIMOSI Output
+	 * DDRQS[07] = 0 [0x0001] -> SPIMISO Input
+	 * -------------------------------------------- */
+	qsmcm->qsmcm_ddrqs = 0x7E;
+	 /* --------------------------------------------
+	 * Base state for used SPI CS pins, if base = 0 active must be 1
+	 * PORTQS[00] = 0 reserved
+	 * PORTQS[01] = 0 reserved
+	 * PORTQS[02] = 0 reserved
+	 * PORTQS[03] = 0 reserved
+	 * PORTQS[04] = 0 [0x0000] RxD2
+	 * PORTQS[05] = 1 [0x0400] TxD2
+	 * PORTQS[06] = 0 [0x0000] RxD1
+	 * PORTQS[07] = 1 [0x0100] TxD1
+	 * PORTQS[08] = 0 reserved
+	 * PORTQS[09] = 0 [0x0000] -> SPICS3 Base Output
+	 * PORTQS[10] = 0 [0x0000] -> SPICS2 Base Output
+	 * PORTQS[11] = 0 [0x0000] -> SPICS1 Base Output
+	 * PORTQS[12] = 0 [0x0000] -> SPICS0 Base Output
+	 * PORTQS[13] = 0 [0x0004] -> SPICLK Output
+	 * PORTQS[14] = 0 [0x0002] -> SPIMOSI Output
+	 * PORTQS[15] = 0 [0x0001] -> SPIMISO Input
+	 * -------------------------------------------- */
+	qsmcm->qsmcm_portqs |= (CFG_SPI_CS_BASE << 3);
+	/* --------------------------------------------
+	 * Controll Register 0
+	 * SPCR0[00] = 1 (0x8000) Master
+	 * SPCR0[01] = 0 (0x0000) Wired-Or
+	 * SPCR0[2..5] = (0x2000) Bits per transfer (default 8)
+	 * SPCR0[06] = 0 (0x0000) Normal polarity
+	 * SPCR0[07] = 0 (0x0000) Normal Clock Phase
+	 * SPCR0[08..15] = 14 1.4MHz
+	 */
+	qsmcm->qsmcm_spcr0=0xA00E;
+	/* --------------------------------------------
+	 * Controll Register 1
+	 * SPCR1[00] = 0 (0x0000) QSPI enabled
+	 * SPCR1[1..7] =  (0x7F00) Delay before Transfer
+	 * SPCR1[8..15] = (0x0000) Delay After transfer (204.8usec@40MHz)
+	 */
+	qsmcm->qsmcm_spcr1=0x7F00;
+	/* --------------------------------------------
+	 * Controll Register 2
+	 * SPCR2[00] = 0 (0x0000) SPI IRQs Disabeld
+	 * SPCR2[01] = 0 (0x0000) No Wrap around
+	 * SPCR2[02] = 0 (0x0000) Wrap to 0
+	 * SPCR2[3..7] = (0x0000) End Queue pointer = 0
+	 * SPCR2[8..10] = 0 (0x0000) reserved
+	 * SPCR2[11..15] = 0 (0x0000) NewQueue Address = 0
+	 */
+	qsmcm->qsmcm_spcr2=0x0000;
+	/* --------------------------------------------
+	 * Controll Register 3
+	 * SPCR3[00..04] = 0 (0x0000) reserved
+	 * SPCR3[05] = 0 (0x0000) Feedback disabled
+	 * SPCR3[06] = 0 (0x0000) IRQ on HALTA & MODF disabled
+	 * SPCR3[07] = 0 (0x0000) Not halted
+	 */
+	qsmcm->qsmcm_spcr3=0x00;
+	/* --------------------------------------------
+	 * SPSR (Controll Register 3) Read only/ reset Flags 08,09,10
+	 * SPCR3[08] = 1 (0x80) QSPI finished
+	 * SPCR3[09] = 1 (0x40) Mode Fault Flag
+	 * SPCR3[10] = 1 (0x20) HALTA
+	 * SPCR3[11..15] = 0 (0x0000) Last executed command
+	 */
+	qsmcm->qsmcm_spsr=0xE0;
+	/*-------------------------------------------
+	 * Setup RAM
+	 */
+	for(i=0;i<32;i++) {
+	 	 qsmcm->qsmcm_recram[i]=0x0000;
+	 	 qsmcm->qsmcm_tranram[i]=0x0000;
+	 	 qsmcm->qsmcm_comdram[i]=0x00;
+	}
+	return;
+}
+
+/* **************************************************************************
+ *
+ *  Function:    spi_init_r
+ *  Dummy, all initializations have been done in spi_init_r
+ * *********************************************************************** */
+void spi_init_r (void)
+{
+	return;
+
+}
+
+/****************************************************************************
+ *  Function:    spi_write
+ **************************************************************************** */
+ssize_t short_spi_write (uchar *addr, int alen, uchar *buffer, int len)
+{
+	int i,dlen;
+	volatile immap_t *immr;
+	volatile qsmcm5xx_t *qsmcm;
+
+	immr = (immap_t *)  CFG_IMMR;
+	qsmcm = (qsmcm5xx_t *)&immr->im_qsmcm;
+	for(i=0;i<32;i++) {
+	 	 qsmcm->qsmcm_recram[i]=0x0000;
+	 	 qsmcm->qsmcm_tranram[i]=0x0000;
+	 	 qsmcm->qsmcm_comdram[i]=0x00;
+	}
+	qsmcm->qsmcm_tranram[0] =  SPI_EEPROM_WREN; /* write enable */
+	spi_xfer(1);
+	i=0;
+	qsmcm->qsmcm_tranram[i++] =  SPI_EEPROM_WRITE; /* WRITE memory array */
+	qsmcm->qsmcm_tranram[i++] =  addr[0];
+	qsmcm->qsmcm_tranram[i++] =  addr[1];
+
+	for(dlen=0;dlen<len;dlen++) {
+		qsmcm->qsmcm_tranram[i+dlen] = buffer[dlen]; /* WRITE memory array */
+	}
+	/* transmit it */
+	spi_xfer(i+dlen);
+	/* ignore received data	*/
+	for (i = 0; i < 1000; i++) {
+		qsmcm->qsmcm_tranram[0] =  SPI_EEPROM_RDSR; /* read status */
+		qsmcm->qsmcm_tranram[1] = 0;
+		spi_xfer(2);
+		if (!(qsmcm->qsmcm_recram[1] & 1)) {
+			break;
+		}
+		udelay(1000);
+	}
+	if (i >= 1000) {
+		printf ("*** spi_write: Time out while writing!\n");
+	}
+	return len;
+}
+
+#define TRANSFER_LEN 16
+
+ssize_t spi_write (uchar *addr, int alen, uchar *buffer, int len)
+{
+	int index,i,newlen;
+	uchar newaddr[2];
+	int curraddr;
+
+	curraddr=(addr[alen-2]<<8)+addr[alen-1];
+	i=len;
+	index=0;
+	do {
+		newaddr[1]=(curraddr & 0xff);
+		newaddr[0]=((curraddr>>8) & 0xff);
+		if(i>TRANSFER_LEN) {
+			newlen=TRANSFER_LEN;
+			i-=TRANSFER_LEN;
+		}
+		else {
+			newlen=i;
+			i=0;
+		}
+		short_spi_write (newaddr, 2, &buffer[index], newlen);
+		index+=newlen;
+		curraddr+=newlen;
+	}while(i);
+	return (len);
+}
+
+/****************************************************************************
+ *  Function:    spi_read
+ **************************************************************************** */
+ssize_t short_spi_read (uchar *addr, int alen, uchar *buffer, int len)
+{
+	int i;
+	volatile immap_t *immr;
+	volatile qsmcm5xx_t *qsmcm;
+
+	immr = (immap_t *)  CFG_IMMR;
+	qsmcm = (qsmcm5xx_t *)&immr->im_qsmcm;
+
+	for(i=0;i<32;i++) {
+	 	 qsmcm->qsmcm_recram[i]=0x0000;
+	 	 qsmcm->qsmcm_tranram[i]=0x0000;
+	 	 qsmcm->qsmcm_comdram[i]=0x00;
+	}
+	i=0;
+	qsmcm->qsmcm_tranram[i++] = (SPI_EEPROM_READ); /* READ memory array */
+	qsmcm->qsmcm_tranram[i++] = addr[0] & 0xff;
+	qsmcm->qsmcm_tranram[i++] = addr[1] & 0xff;
+	spi_xfer(3 + len);
+	for(i=0;i<len;i++) {
+		*buffer++=(char)qsmcm->qsmcm_recram[i+3];
+	}
+	return len;
+}
+
+ssize_t spi_read (uchar *addr, int alen, uchar *buffer, int len)
+{
+	int index,i,newlen;
+	uchar newaddr[2];
+	int curraddr;
+
+	curraddr=(addr[alen-2]<<8)+addr[alen-1];
+	i=len;
+	index=0;
+	do {
+		newaddr[1]=(curraddr & 0xff);
+		newaddr[0]=((curraddr>>8) & 0xff);
+		if(i>TRANSFER_LEN) {
+			newlen=TRANSFER_LEN;
+			i-=TRANSFER_LEN;
+		}
+		else {
+			newlen=i;
+			i=0;
+		}
+		short_spi_read (newaddr, 2, &buffer[index], newlen);
+		index+=newlen;
+		curraddr+=newlen;
+	}while(i);
+	return (len);
+}
+
+
+
+/****************************************************************************
+ *  Function:    spi_xfer
+ **************************************************************************** */
+ssize_t spi_xfer (size_t count)
+{
+	volatile immap_t *immr;
+	volatile qsmcm5xx_t *qsmcm;
+	int i;
+	int tm;
+	ushort status;
+	immr = (immap_t *)  CFG_IMMR;
+	qsmcm = (qsmcm5xx_t *)&immr->im_qsmcm;
+	DPRINT (("*** spi_xfer entered count %d***\n",count));
+
+	/* Set CS for device */
+	for(i=0;i<(count-1);i++)
+		qsmcm->qsmcm_comdram[i] = 0x80 | CFG_SPI_CS_ACT;  /* CS3 is connected to the SPI EEPROM */
+
+	qsmcm->qsmcm_comdram[i] = CFG_SPI_CS_ACT; /* CS3 is connected to the SPI EEPROM */
+	qsmcm->qsmcm_spcr2=((count-1)&0x1F)<<8;
+
+	DPRINT (("*** spi_xfer: Bytes to be xferred: %d ***\n", count));
+
+	qsmcm->qsmcm_spsr=0xE0; /* clear all flags */
+
+	/* start spi transfer */
+	DPRINT (("*** spi_xfer: Performing transfer ...\n"));
+	qsmcm->qsmcm_spcr1 |= 0x8000;		/* Start transmit */
+
+	/* --------------------------------
+	 * Wait for SPI transmit to get out
+	 * or time out (1 second = 1000 ms)
+	 * -------------------------------- */
+	for (tm=0; tm<1000; ++tm) {
+		status=qsmcm->qsmcm_spcr1;
+		if((status & 0x8000)==0)
+			break;
+		udelay (1000);
+	}
+	if (tm >= 1000) {
+		printf ("*** spi_xfer: Time out while xferring to/from SPI!\n");
+	}
+#ifdef	DEBUG
+	printf ("\nspi_xfer: txbuf after xfer\n");
+	memdump ((void *) qsmcm->qsmcm_tranram, 32);	/* dump of txbuf before transmit */
+	printf ("spi_xfer: rxbuf after xfer\n");
+	memdump ((void *) qsmcm->qsmcm_recram, 32);	/* dump of rxbuf after transmit */
+	printf ("\nspi_xfer: commbuf after xfer\n");
+	memdump ((void *) qsmcm->qsmcm_comdram, 32);	/* dump of txbuf before transmit */
+	printf ("\n");
+#endif
+
+	return count;
+}
+
+#endif	/* CONFIG_SPI  */
+
+
diff --git a/cpu/mpc5xx/start.S b/cpu/mpc5xx/start.S
index 548ec99..b56be2f 100644
--- a/cpu/mpc5xx/start.S
+++ b/cpu/mpc5xx/start.S
@@ -117,6 +117,29 @@ boot_warm:
 	mtspr	COUNTA, r0
 	mtspr	COUNTB, r0
 
+#if defined(CONFIG_PATI)
+	/* the external flash access on PATI fails if programming the PLL to 40MHz.
+	 * Copy the PLL programming code to the internal RAM and execute it
+	 *----------------------------------------------------------------------*/
+	lis	r3, CFG_MONITOR_BASE@h
+	ori	r3, r3, CFG_MONITOR_BASE@l
+	addi	r3, r3, pll_prog_code_start - _start + EXC_OFF_SYS_RESET
+
+	lis	r4, CFG_INIT_RAM_ADDR@h
+	ori	r4, r4, CFG_INIT_RAM_ADDR@l
+	mtlr	r4
+	addis	r5,0,0x0
+	ori	r5,r5,((pll_prog_code_end - pll_prog_code_start) >>2)
+	mtctr	r5
+	addi	r3, r3, -4
+	addi	r4, r4, -4
+0:
+	lwzu	r0,4(r3)
+	stwu	r0,4(r4)
+	bdnz	0b                /* copy loop */
+	blrl
+#endif
+
 	/*
 	 * Calculate absolute address in FLASH and jump there
 	 *----------------------------------------------------------------------*/
@@ -553,3 +576,30 @@ trap_reloc:
 	isync
 
 	blr
+
+
+#if defined(CONFIG_PATI)
+/* Program the PLL */
+pll_prog_code_start:
+	lis	r4, (CFG_IMMR + 0x002fc384)@h
+	ori	r4, r4, (CFG_IMMR + 0x002fc384)@l
+	lis	r3, (0x55ccaa33)@h
+	ori	r3, r3, (0x55ccaa33)@l
+	stw	r3, 0(r4)
+	lis	r4, (CFG_IMMR + 0x002fc284)@h
+	ori	r4, r4, (CFG_IMMR + 0x002fc284)@l
+	lis	r3, CFG_PLPRCR@h
+	ori	r3, r3, CFG_PLPRCR@l
+	stw	r3, 0(r4)
+	addis	r3,0,0x0
+	ori	r3,r3,0xA000
+	mtctr	r3
+..spinlp:
+  bdnz    ..spinlp                /* spin loop */
+	blr
+pll_prog_code_end:
+	nop
+	blr
+#endif
+
+
diff --git a/drivers/rtl8139.c b/drivers/rtl8139.c
index 5b14e71..b9e4a8d 100644
--- a/drivers/rtl8139.c
+++ b/drivers/rtl8139.c
@@ -44,7 +44,7 @@
      which reserves the ranges 0x00000-0x10000 and 0x98000-0xA0000.  My
      interpretation of this "reserved" is that Etherboot may do whatever it
      likes, as long as its environment is kept intact (like the BIOS
-     variables).  Hopefully fixed rtl_poll() once and for all.  The symptoms
+     variables).  Hopefully fixed rtl_poll() once and for all.	The symptoms
      were that if Etherboot was left at the boot menu for several minutes, the
      first eth_poll failed.  Seems like I am the only person who does this.
      First of all I fixed the debugging code and then set out for a long bug
@@ -53,18 +53,18 @@
      driver and even the FreeBSD driver (what a piece of crap!) - and
      eventually spotted the nasty thing: the transmit routine was acknowledging
      each and every interrupt pending, including the RxOverrun and RxFIFIOver
-     interrupts.  This confused the RTL8139 thoroughly.  It destroyed the
+     interrupts.  This confused the RTL8139 thoroughly.	 It destroyed the
      Rx ring contents by dumping the 2K FIFO contents right where we wanted to
      get the next packet.  Oh well, what fun.
 
-  18 Jan 2000   mdc@thinguin.org (Marty Connor)
+  18 Jan 2000	mdc@thinguin.org (Marty Connor)
      Drastically simplified error handling.  Basically, if any error
      in transmission or reception occurs, the card is reset.
      Also, pointed all transmit descriptors to the same buffer to
-     save buffer space.  This should decrease driver size and avoid
+     save buffer space.	 This should decrease driver size and avoid
      corruption because of exceeding 32K during runtime.
 
-  28 Jul 1999   (Matthias Meixner - meixner@rbg.informatik.tu-darmstadt.de)
+  28 Jul 1999	(Matthias Meixner - meixner@rbg.informatik.tu-darmstadt.de)
      rtl_poll was quite broken: it used the RxOK interrupt flag instead
      of the RxBufferEmpty flag which often resulted in very bad
      transmission performace - below 1kBytes/s.
@@ -77,10 +77,6 @@
 #include <asm/io.h>
 #include <pci.h>
 
-#ifdef __MIPS__
-static unsigned long mips_io_port_base = 0;
-#endif
-
 #if (CONFIG_COMMANDS & CFG_CMD_NET) && defined(CONFIG_NET_MULTI) && \
 	defined(CONFIG_RTL8139)
 
@@ -95,11 +91,11 @@ static unsigned long mips_io_port_base = 0;
 
 /* PCI Tuning Parameters
    Threshold is bytes transferred to chip before transmission starts. */
-#define TX_FIFO_THRESH 256      /* In bytes, rounded down to 32 byte units. */
-#define RX_FIFO_THRESH  4       /* Rx buffer level before first PCI xfer.  */
-#define RX_DMA_BURST    4       /* Maximum PCI burst, '4' is 256 bytes */
-#define TX_DMA_BURST    4       /* Calculate as 16<<val. */
-#define NUM_TX_DESC     4       /* Number of Tx descriptor registers. */
+#define TX_FIFO_THRESH 256	/* In bytes, rounded down to 32 byte units. */
+#define RX_FIFO_THRESH	4	/* Rx buffer level before first PCI xfer.  */
+#define RX_DMA_BURST	4	/* Maximum PCI burst, '4' is 256 bytes */
+#define TX_DMA_BURST	4	/* Calculate as 16<<val. */
+#define NUM_TX_DESC	4	/* Number of Tx descriptor registers. */
 #define TX_BUF_SIZE	ETH_FRAME_LEN	/* FCS is added by the chip */
 #define RX_BUF_LEN_IDX 0	/* 0, 1, 2 is allowed - 8,16,32K rx buffer */
 #define RX_BUF_LEN (8192 << RX_BUF_LEN_IDX)
@@ -108,8 +104,8 @@ static unsigned long mips_io_port_base = 0;
 #undef DEBUG_RX
 
 #define currticks()	get_timer(0)
-#define bus_to_phys(a)  pci_mem_to_phys((pci_dev_t)dev->priv, a)
-#define phys_to_bus(a)  pci_phys_to_mem((pci_dev_t)dev->priv, a)
+#define bus_to_phys(a)	pci_mem_to_phys((pci_dev_t)dev->priv, a)
+#define phys_to_bus(a)	pci_phys_to_mem((pci_dev_t)dev->priv, a)
 
 /* Symbolic offsets to registers. */
 enum RTL8139_registers {
@@ -276,12 +272,12 @@ static int rtl8139_probe(struct eth_device *dev, bd_t *bis)
 /* Serial EEPROM section. */
 
 /*  EEPROM_Ctrl bits. */
-#define EE_SHIFT_CLK    0x04    /* EEPROM shift clock. */
-#define EE_CS		0x08    /* EEPROM chip select. */
-#define EE_DATA_WRITE   0x02    /* EEPROM chip data in. */
-#define EE_WRITE_0      0x00
-#define EE_WRITE_1      0x02
-#define EE_DATA_READ    0x01    /* EEPROM chip data out. */
+#define EE_SHIFT_CLK	0x04	/* EEPROM shift clock. */
+#define EE_CS		0x08	/* EEPROM chip select. */
+#define EE_DATA_WRITE	0x02	/* EEPROM chip data in. */
+#define EE_WRITE_0	0x00
+#define EE_WRITE_1	0x02
+#define EE_DATA_READ	0x01	/* EEPROM chip data out. */
 #define EE_ENB		(0x80 | EE_CS)
 
 /*
@@ -289,12 +285,12 @@ static int rtl8139_probe(struct eth_device *dev, bd_t *bis)
 	No extra delay is needed with 33Mhz PCI, but 66Mhz may change this.
 */
 
-#define eeprom_delay()  inl(ee_addr)
+#define eeprom_delay()	inl(ee_addr)
 
 /* The EEPROM commands include the alway-set leading bit. */
-#define EE_WRITE_CMD    (5)
-#define EE_READ_CMD     (6)
-#define EE_ERASE_CMD    (7)
+#define EE_WRITE_CMD	(5)
+#define EE_READ_CMD	(6)
+#define EE_ERASE_CMD	(7)
 
 static int read_eeprom(int location, int addr_len)
 {
@@ -390,7 +386,7 @@ static void rtl_reset(struct eth_device *dev)
 
 	/* If we add multicast support, the MAR0 register would have to be
 	 * initialized to 0xffffffffffffffff (two 32 bit accesses).  Etherboot
-	 * only needs broadcast (for ARP/RARP/BOOTP/DHCP) and unicast.  */
+	 * only needs broadcast (for ARP/RARP/BOOTP/DHCP) and unicast.	*/
 
 	outb(CmdRxEnb | CmdTxEnb, ioaddr + ChipCmd);
 
@@ -436,7 +432,7 @@ static int rtl_transmit(struct eth_device *dev, volatile void *packet, int lengt
 		status = inw(ioaddr + IntrStatus);
 		/* Only acknlowledge interrupt sources we can properly handle
 		 * here - the RxOverflow/RxFIFOOver MUST be handled in the
-		 * rtl_poll() function.  */
+		 * rtl_poll() function.	 */
 		outw(status & (TxOK | TxErr | PCIErr), ioaddr + IntrStatus);
 		if ((status & (TxOK | TxErr | PCIErr)) != 0) break;
 	} while (currticks() < to);
@@ -490,7 +486,7 @@ static int rtl_poll(struct eth_device *dev)
 	if ((rx_status & (RxBadSymbol|RxRunt|RxTooLong|RxCRCErr|RxBadAlign)) ||
 	    (rx_size < ETH_ZLEN) || (rx_size > ETH_FRAME_LEN + 4)) {
 		printf("rx error %hX\n", rx_status);
-		rtl_reset(dev);	/* this clears all interrupts still pending */
+		rtl_reset(dev); /* this clears all interrupts still pending */
 		return 0;
 	}
 
@@ -527,6 +523,8 @@ static void rtl_disable(struct eth_device *dev)
 {
 	int i;
 
+	ioaddr = dev->iobase;
+
 	/* reset the chip */
 	outb(CmdReset, ioaddr + ChipCmd);
 
diff --git a/include/asm-arm/u-boot-arm.h b/include/asm-arm/u-boot-arm.h
index 4c92b1f..d5dbd6d 100644
--- a/include/asm-arm/u-boot-arm.h
+++ b/include/asm-arm/u-boot-arm.h
@@ -43,6 +43,8 @@ int	cleanup_before_linux(void);
 /* board/.../... */
 int	board_init(void);
 int	dram_init (void);
+void	setup_serial_tag (struct tag **params);
+void	setup_revision_tag (struct tag **params);
 
 /* ------------------------------------------------------------ */
 /* Here is a list of some prototypes which are incompatible to	*/
diff --git a/include/common.h b/include/common.h
index 73a5a2e..6b92548 100644
--- a/include/common.h
+++ b/include/common.h
@@ -185,6 +185,7 @@ void inline setenv   (char *, char *);
 void    setenv       (char *, char *);
 #endif /* CONFIG_PPC */
 #ifdef CONFIG_ARM
+# include <asm/setup.h>
 # include <asm/u-boot-arm.h>	/* ARM version to be fixed! */
 #endif /* CONFIG_ARM */
 #ifdef CONFIG_I386		/* x86 version to be fixed! */
diff --git a/include/configs/PATI.h b/include/configs/PATI.h
new file mode 100644
index 0000000..42c78d4
--- /dev/null
+++ b/include/configs/PATI.h
@@ -0,0 +1,285 @@
+/*
+ * (C) Copyright 2003
+ * Denis Peter d.peter@mpl.ch
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation,
+ */
+
+/*
+ * File:		PATI.h
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*
+ * High Level Configuration Options
+ */
+
+#define CONFIG_MPC555		1		/* This is an MPC555 CPU		*/
+#define CONFIG_PATI		1		/* ...On a PATI board 	*/
+/* Serial Console Configuration */
+#define	CONFIG_5xx_CONS_SCI1
+#undef	CONFIG_5xx_CONS_SCI2
+
+#define CONFIG_BAUDRATE		9600
+
+#define CONFIG_COMMANDS		(CFG_CMD_MEMORY | CFG_CMD_LOADB | CFG_CMD_REGINFO | 		\
+				 CFG_CMD_FLASH | CFG_CMD_LOADS | CFG_CMD_ENV |  CFG_CMD_REGINFO	| 		\
+				 CFG_CMD_BDI | CFG_CMD_CONSOLE | CFG_CMD_RUN | CFG_CMD_BSP |	\
+				 CFG_CMD_IMI | CFG_CMD_EEPROM  | CFG_CMD_IRQ | CFG_CMD_MISC \
+)
+
+/* This must be included AFTER the definition of CONFIG_COMMANDS (if any) */
+#include <cmd_confdefs.h>
+
+#if 0
+#define CONFIG_BOOTDELAY	-1		/* autoboot disabled			*/
+#else
+#define CONFIG_BOOTDELAY	5		/* autoboot after 5 seconds		*/
+#endif
+#define CONFIG_BOOTCOMMAND	"" 	/* autoboot command			*/
+
+#define CONFIG_BOOTARGS		""		/* */
+
+#define CONFIG_WATCHDOG				/* turn on platform specific watchdog 	*/
+
+/*#define CONFIG_STATUS_LED	1		*//* Enable status led */
+
+#define CONFIG_LOADS_ECHO	1		/* Echo on for serial download */
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CFG_CONSOLE_IS_IN_ENV	/* stdin, stdout and stderr are in evironment */
+#define CONFIG_PREBOOT
+
+#define	CFG_LONGHELP				/* undef to save memory		*/
+#define	CFG_PROMPT		"pati=> "		/* Monitor Command Prompt	*/
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define	CFG_CBSIZE		1024		/* Console I/O Buffer Size	*/
+#else
+#define	CFG_CBSIZE		256		/* Console I/O Buffer Size	*/
+#endif
+#define	CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define	CFG_MAXARGS		16	       /* max number of command args	*/
+#define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+
+#define CFG_MEMTEST_START	0x00010000	/* memtest works on		*/
+#define CFG_MEMTEST_END		0x00A00000	/* 10 MB in SRAM			*/
+
+#define	CFG_LOAD_ADDR		0x100000	/* default load address		*/
+
+#define	CFG_HZ			1000		/* Decrementer freq: 1 ms ticks	*/
+
+#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 1250000 }
+
+
+/***********************************************************************
+ * Last Stage Init
+ ***********************************************************************/
+#define CONFIG_LAST_STAGE_INIT
+
+/*
+ * Low Level Configuration Settings
+ */
+
+/*
+ * Internal Memory Mapped (This is not the IMMR content)
+ */
+#define CFG_IMMR		0x01C00000				/* Physical start adress of internal memory map */
+
+/*
+ * Definitions for initial stack pointer and data area
+ */
+#define CFG_INIT_RAM_ADDR	(CFG_IMMR + 0x003f9800)      		/* Physical start adress of internal MPC555 writable RAM */
+#define	CFG_INIT_RAM_END	(CFG_IMMR + 0x003fffff)       		/* Physical end adress of internal MPC555 used RAM area	*/
+#define	CFG_GBL_DATA_SIZE	128					/* Size in bytes reserved for initial global data */
+#define CFG_GBL_DATA_OFFSET	((CFG_INIT_RAM_END - CFG_INIT_RAM_ADDR) - CFG_GBL_DATA_SIZE) /* Offset from the beginning of ram */
+#define	CFG_INIT_SP_ADDR	(CFG_IMMR + 0x03fa000)			/* Physical start adress of inital stack */
+/*
+ * Start addresses for the final memory configuration
+ * Please note that CFG_SDRAM_BASE _must_ start at 0
+ */
+#define	CFG_SDRAM_BASE		0x00000000	/* Monitor won't change memory map 			*/
+#define CFG_FLASH_BASE		0xffC00000	/* External flash */
+#define PCI_BASE		0x03000000	/* PCI Base (CS2) */
+#define PCI_CONFIG_BASE		0x04000000	/* PCI & PLD  (CS3) */
+#define PLD_CONFIG_BASE		0x04001000	/* PLD  (CS3) */
+
+#define	CFG_MONITOR_BASE	0xFFF00000
+/* CFG_FLASH_BASE	*/ /* TEXT_BASE is defined in the board config.mk file. 	*/
+						/* This adress is given to the linker with -Ttext to 	*/
+						/* locate the text section at this adress. 		*/
+#define	CFG_MONITOR_LEN		(256 << 10)	/* Reserve 192 kB for Monitor				*/
+#define	CFG_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()				*/
+
+
+
+#define CFG_RESET_ADDRESS	(PLD_CONFIG_BASE + 0x10)	 /* Adress which causes reset */
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define	CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux		*/
+
+
+/*-----------------------------------------------------------------------
+ * FLASH organization
+ *-----------------------------------------------------------------------
+ *
+ */
+
+#define CFG_MAX_FLASH_BANKS		1		/* Max number of memory banks		*/
+#define CFG_MAX_FLASH_SECT		128		/* Max number of sectors on one chip 	*/
+#define CFG_FLASH_ERASE_TOUT	180000		/* Timeout for Flash Erase (in ms) 	*/
+#define CFG_FLASH_WRITE_TOUT	600		/* Timeout for Flash Write (in ms) 	*/
+
+
+#define	CFG_ENV_IS_IN_EEPROM
+#ifdef	CFG_ENV_IS_IN_EEPROM
+#define CFG_ENV_OFFSET		0
+#define CFG_ENV_SIZE		2048
+#endif
+
+#undef  CFG_ENV_IS_IN_FLASH
+#ifdef	CFG_ENV_IS_IN_FLASH
+#define	CFG_ENV_SIZE		0x00002000		/* Set whole sector as env 		*/
+#define CFG_ENV_OFFSET		((0 - CFG_FLASH_BASE) - CFG_ENV_SIZE) 		/* Environment starts at this adress 	*/
+#endif
+
+
+#define CONFIG_SPI		1
+#define CFG_SPI_CS_USED	0x09 /* CS0 and CS3 are used */
+#define CFG_SPI_CS_BASE	0x08 /* CS3 is active low */
+#define CFG_SPI_CS_ACT	0x00 /* CS3 is active low */
+/*-----------------------------------------------------------------------
+ * SYPCR - System Protection Control
+ * SYPCR can only be written once after reset!
+ *-----------------------------------------------------------------------
+ * SW Watchdog freeze
+ */
+#undef CONFIG_WATCHDOG
+#if defined(CONFIG_WATCHDOG)
+#define CFG_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
+			 SYPCR_SWE | SYPCR_SWRI| SYPCR_SWP)
+#else
+#define CFG_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
+			 SYPCR_SWP)
+#endif	/* CONFIG_WATCHDOG */
+
+
+
+
+/*-----------------------------------------------------------------------
+ * TBSCR - Time Base Status and Control
+ *-----------------------------------------------------------------------
+ * Clear Reference Interrupt Status, Timebase freezing enabled
+ */
+#define CFG_TBSCR	(TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)
+
+/*-----------------------------------------------------------------------
+ * PISCR - Periodic Interrupt Status and Control
+ *-----------------------------------------------------------------------
+ * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
+ */
+#define CFG_PISCR	(PISCR_PS | PISCR_PITF)
+
+/*-----------------------------------------------------------------------
+ * SCCR - System Clock and reset Control Register
+ *-----------------------------------------------------------------------
+ * Set clock output, timebase and RTC source and divider,
+ * power management and some other internal clocks
+ */
+#define SCCR_MASK	SCCR_EBDF00
+#define CFG_SCCR	(SCCR_TBS     | SCCR_RTDIV    | SCCR_RTSEL    | \
+			 SCCR_COM01   | SCCR_DFNL000 | SCCR_DFNH000)
+
+/*-----------------------------------------------------------------------
+ * SIUMCR - SIU Module Configuration
+ *-----------------------------------------------------------------------
+ * Data show cycle
+ */
+#define CFG_SIUMCR	(SIUMCR_DBGC00 | SIUMCR_EARB | SIUMCR_GPC01 | SIUMCR_MLRC11) /* Disable data show cycle 	*/
+
+/*-----------------------------------------------------------------------
+ * PLPRCR - PLL, Low-Power, and Reset Control Register
+ *-----------------------------------------------------------------------
+ * Set all bits to 40 Mhz
+ *
+ */
+#define CFG_OSC_CLK   	((uint)4000000) 	/* Oscillator clock is 4MHz 	*/
+
+
+#define CFG_PLPRCR	(PLPRCR_MF_9 | PLPRCR_DIVF_0)
+
+/*-----------------------------------------------------------------------
+ * UMCR - UIMB Module Configuration Register
+ *-----------------------------------------------------------------------
+ *
+ */
+#define CFG_UMCR	(UMCR_FSPEED) 		/* IMB clock same as U-bus 	*/
+
+/*-----------------------------------------------------------------------
+ * ICTRL - I-Bus Support Control Register
+ */
+#define CFG_ICTRL	(ICTRL_ISCT_SER_7) 	/* Take out of serialized mode 	*/
+
+/*-----------------------------------------------------------------------
+ * USIU - Memory Controller Register
+ *-----------------------------------------------------------------------
+ */
+#define CFG_BR0_PRELIM		(CFG_FLASH_BASE | BR_V | BR_BI | BR_PS_16 | BR_SETA)
+#define CFG_OR0_PRELIM		(0xffc00000) /* SCY is not used if external TA is set */
+/* SDRAM */
+#define CFG_BR1_PRELIM		(CFG_SDRAM_BASE | BR_V | BR_BI | BR_PS_32 | BR_SETA)
+#define CFG_OR1_PRELIM		(OR_ADDR_MK_FF) /* SCY is not used if external TA is set */
+/* PCI */
+#define CFG_BR2_PRELIM		(PCI_BASE | BR_V | BR_PS_32 | BR_SETA)
+#define CFG_OR2_PRELIM		(OR_ADDR_MK_FF)
+/* config registers: */
+#define CFG_BR3_PRELIM		(PCI_CONFIG_BASE | BR_V | BR_BI | BR_PS_32 | BR_SETA)
+#define CFG_OR3_PRELIM		(0xffff0000)
+
+#define FLASH_BASE0_PRELIM	CFG_FLASH_BASE	/* We don't realign the flash	*/
+
+/*-----------------------------------------------------------------------
+ * DER - Timer Decrementer
+ *-----------------------------------------------------------------------
+ * Initialise to zero
+ */
+#define CFG_DER			0x00000000
+
+
+/*
+ * Internal Definitions
+ *
+ * Boot Flags
+ */
+#define	BOOTFLAG_COLD	0x01			/* Normal Power-On: Boot from FLASH	*/
+#define BOOTFLAG_WARM	0x02			/* Software reboot			*/
+
+
+#define VERSION_TAG "released"
+#define CONFIG_ISO_STRING "MEV-10084-001"
+
+#define CONFIG_IDENT_STRING "\n(c) 2003 by MPL AG Switzerland, " CONFIG_ISO_STRING " " VERSION_TAG
+
+#endif	/* __CONFIG_H */
diff --git a/include/mpc5xx.h b/include/mpc5xx.h
index 345fca8..7508f6d 100644
--- a/include/mpc5xx.h
+++ b/include/mpc5xx.h
@@ -75,6 +75,10 @@
 #define SIUMCR_DBPC01	0x00080000	/* - " -				*/
 #define SIUMCR_DBPC10	0x00100000	/* - " -				*/
 #define SIUMCR_DBPC11	0x00180000	/* - " -				*/
+#define SIUMCR_GPC00	0x00000000	/* General Pins Config 			*/
+#define SIUMCR_GPC01	0x00020000	/* General Pins Config 			*/
+#define SIUMCR_GPC10	0x00040000	/* General Pins Config 			*/
+#define SIUMCR_GPC11	0x00060000	/* General Pins Config 			*/
 #define SIUMCR_DLK	0x00010000	/* Debug Register Lock			*/
 #define SIUMCR_SC00	0x00000000	/* Multi Chip 32 bit			*/
 #define SIUMCR_SC01	0x00004000	/* Muilt Chip 16 bit			*/
@@ -98,6 +102,7 @@
  * PISCR - Periodic Interrupt Status and Control Register
  */
 #define PISCR_PITF	((ushort)0x0002)	/* PIT stops when FREEZE	*/
+#define PISCR_PS	0x0080			/* Periodic Interrupt Status	*/
 
 /*-----------------------------------------------------------------------
  * PLPRCR - PLL, Low-Power, and Reset Control Register
@@ -106,11 +111,12 @@
 #define PLPRCR_DIVF_MSK	0x0000001f	/* DIVF mask				*/
 #define PLPRCR_CSRC_MSK 0x00000400	/* CSRC mask				*/
 #define PLPRCR_MF_SHIFT 0x00000014	/* Multiplication factor shift value	*/
-#define PLPRCR_DIVF_0   0x00900000	/* Division factor 0			*/
-#define PLPRCR_MF_9     0x00000000	/* Mulitipliaction factor 9		*/
+#define PLPRCR_DIVF_0   0x00000000	/* Division factor 0			*/
+#define PLPRCR_MF_9     0x00900000	/* Mulitipliaction factor 9		*/
 #define PLPRCR_TEXPS	0x00004000	/* TEXP Status				*/
 #define PLPRCR_TMIST	0x00001000	/* Timers Interrupt Status		*/
 #define PLPRCR_CSR	0x00000080	/* CheskStop Reset value		*/
+#define PLPRCR_SPLSS	0x00008000	/* SPLL Lock Status Sticky bit		*/
 
 /*-----------------------------------------------------------------------
  * SCCR - System Clock and reset Control Register
@@ -124,6 +130,7 @@
 #define SCCR_TBS	0x02000000	/* Time Base Source			*/
 #define SCCR_RTDIV	0x01000000	/* RTC Clock Divide 			*/
 #define SCCR_COM00	0x00000000	/* full strength CLKOUT output buffer	*/
+#define SCCR_COM01	0x20000000	/* half strength CLKOUT output buffer	*/
 #define SCCR_DFNL000	0x00000000	/* Division by 2 (default = minimum)	*/
 #define SCCR_DFNH000	0x00000000	/* Division by 1 (default = minimum)	*/
 
@@ -136,6 +143,7 @@
 #define BR_PS_16	0x00000800	/* 16 bit port size 			*/
 #define BR_PS_32	0x00000000	/* 32 bit port size 			*/
 #define BR_LBDIR	0x00000008	/* Late burst data in progess		*/
+#define BR_SETA		0x00000004	/* External Data Acknowledge		*/
 #define OR_SCY_3	0x00000030	/* 3 clock cycles wait states		*/
 #define OR_SCY_1	0x00000000	/* 1 clock cycle wait state		*/
 #define OR_SCY_8	0x00000080	/* 8 clock cycles wait states		*/
@@ -143,7 +151,7 @@
 #define OR_BSCY		0x00000060	/* Burst beats length in clocks		*/
 #define OR_ACS_10	0x00000600	/* Adress to chip-select setup		*/
 #define OR_CSNT		0x00000800	/* Chip-select negotation time		*/
-#define OR_ETHR		0x00000000	/* Extended hold time on read		*/
+#define OR_ETHR		0x00000100	/* Extended hold time on read		*/
 #define OR_ADDR_MK_FF	0xFF000000
 #define OR_ADDR_MK_FFFF	0xFFFF0000
 
diff --git a/lib_arm/armlinux.c b/lib_arm/armlinux.c
index 19680b5..e96ea81 100644
--- a/lib_arm/armlinux.c
+++ b/lib_arm/armlinux.c
@@ -30,16 +30,14 @@
 #include <dataflash.h>
 #endif
 
-#include <asm/setup.h>
-#define tag_size(type)  ((sizeof(struct tag_header) + sizeof(struct type)) >> 2)
-#define tag_next(t)     ((struct tag *)((u32 *)(t) + (t)->hdr.size))
-
 /*cmd_boot.c*/
 extern int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
 
 #if defined (CONFIG_SETUP_MEMORY_TAGS) || \
     defined (CONFIG_CMDLINE_TAG) || \
     defined (CONFIG_INITRD_TAG) || \
+    defined (CONFIG_SERIAL_TAG) || \
+    defined (CONFIG_REVISION_TAG) || \
     defined (CONFIG_VFD)
 static void setup_start_tag (bd_t *bd);
 
@@ -221,8 +219,16 @@ void do_bootm_linux (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[],
 #if defined (CONFIG_SETUP_MEMORY_TAGS) || \
     defined (CONFIG_CMDLINE_TAG) || \
     defined (CONFIG_INITRD_TAG) || \
+    defined (CONFIG_SERIAL_TAG) || \
+    defined (CONFIG_REVISION_TAG) || \
     defined (CONFIG_VFD)
 	setup_start_tag (bd);
+#ifdef CONFIG_SERIAL_TAG
+	setup_serial_tag (&params);
+#endif
+#ifdef CONFIG_REVISION_TAG
+	setup_revision_tag (&params);
+#endif
 #ifdef CONFIG_SETUP_MEMORY_TAGS
 	setup_memory_tags (bd);
 #endif
@@ -251,6 +257,8 @@ void do_bootm_linux (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[],
 #if defined (CONFIG_SETUP_MEMORY_TAGS) || \
     defined (CONFIG_CMDLINE_TAG) || \
     defined (CONFIG_INITRD_TAG) || \
+    defined (CONFIG_SERIAL_TAG) || \
+    defined (CONFIG_REVISION_TAG) || \
     defined (CONFIG_VFD)
 static void setup_start_tag (bd_t *bd)
 {
@@ -308,10 +316,6 @@ static void setup_commandline_tag (bd_t *bd, char *commandline)
 }
 
 
-#ifndef ATAG_INITRD2
-#define ATAG_INITRD2    0x54420005
-#endif
-
 #ifdef CONFIG_INITRD_TAG
 static void setup_initrd_tag (bd_t *bd, ulong initrd_start, ulong initrd_end)
 {