Merge with /home/wd/git/u-boot/custodian/u-boot-ppc4xx

12 files changed, 120 insertions, 18 deletions

diff --git a/Makefile b/Makefile
index 84b49fe..8e551eb 100644
--- a/Makefile
+++ b/Makefile
@@ -430,6 +430,7 @@ inka4x0_config:	unconfig
 	@$(MKCONFIG) inka4x0 ppc mpc5xxx inka4x0
 
 lite5200b_config	\
+lite5200b_PM_config	\
 lite5200b_LOWBOOT_config:	unconfig
 	@mkdir -p $(obj)include
 	@mkdir -p $(obj)board/icecube
@@ -438,6 +439,10 @@ lite5200b_LOWBOOT_config:	unconfig
 	@ echo "... DDR memory revision"
 	@ echo "#define CONFIG_MPC5200"		>>$(obj)include/config.h
 	@ echo "#define CONFIG_LITE5200B"	>>$(obj)include/config.h
+	@[ -z "$(findstring _PM_,$@)" ] || \
+		{ echo "#define CONFIG_LITE5200B_PM"	>>$(obj)include/config.h ; \
+		  echo "... with power management (low-power mode) support" ; \
+		}
 	@[ -z "$(findstring LOWBOOT_,$@)" ] || \
 		{ echo "TEXT_BASE = 0xFF000000" >$(obj)board/icecube/config.tmp ; \
 		  echo "... with LOWBOOT configuration" ; \
diff --git a/board/amcc/acadia/acadia.c b/board/amcc/acadia/acadia.c
index 7d0046a..baf598c 100644
--- a/board/amcc/acadia/acadia.c
+++ b/board/amcc/acadia/acadia.c
@@ -26,7 +26,7 @@
 
 extern void board_pll_init_f(void);
 
-void liveoak_gpio_init(void)
+static void acadia_gpio_init(void)
 {
 	/*
 	 * GPIO0 setup (select GPIO or alternate function)
@@ -55,8 +55,12 @@ int board_early_init_f(void)
 {
 	unsigned int reg;
 
-	board_pll_init_f();
-	liveoak_gpio_init();
+	/* don't reinit PLL when booting via I2C bootstrap option */
+	mfsdr(SDR_PINSTP, reg);
+	if (reg != 0xf0000000)
+		board_pll_init_f();
+
+	acadia_gpio_init();
 
 	/* USB Host core needs this bit set */
 	mfsdr(sdrultra1, reg);
diff --git a/board/amcc/katmai/init.S b/board/amcc/katmai/init.S
index 6b024ee..5202ae6 100644
--- a/board/amcc/katmai/init.S
+++ b/board/amcc/katmai/init.S
@@ -103,7 +103,7 @@ tlbtabB:
 
 	tlbentry(CFG_PERIPHERAL_BASE, SZ_4K, 0xF0000000, 4, AC_R|AC_W|SA_G|SA_I)
 
-	tlbentry(CFG_ACE_BASE, SZ_1K, 0xE0000000, 4,AC_R|AC_W|SA_G|SA_I)
+	tlbentry(CFG_ACE_BASE, SZ_1K, CFG_ACE_BASE, 4,AC_R|AC_W|SA_G|SA_I)
 
 	tlbentry(CFG_PCI_BASE, SZ_256M, 0x00000000, 0xC, AC_R|AC_W|SA_G|SA_I)
 	tlbentry(CFG_PCI_MEMBASE, SZ_256M, 0x10000000, 0xC, AC_R|AC_W|SA_G|SA_I)
diff --git a/board/icecube/icecube.c b/board/icecube/icecube.c
index 700c9d9..2960998 100644
--- a/board/icecube/icecube.c
+++ b/board/icecube/icecube.c
@@ -42,6 +42,53 @@
 #include "mt48lc16m16a2-75.h"
 # endif
 #endif
+
+#ifdef CONFIG_LITE5200B_PM
+/* u-boot part of low-power mode implementation */
+#define SAVED_ADDR (*(void **)0x00000000)
+#define PSC2_4 0x02
+
+void lite5200b_wakeup(void)
+{
+	unsigned char wakeup_pin;
+	void (*linux_wakeup)(void);
+
+	/* check PSC2_4, if it's down "QT" is signaling we have a wakeup
+	 * from low power mode */
+	*(vu_char *)MPC5XXX_WU_GPIO_ENABLE = PSC2_4;
+	__asm__ volatile ("sync");
+
+	wakeup_pin = *(vu_char *)MPC5XXX_WU_GPIO_DATA_I;
+	if (wakeup_pin & PSC2_4)
+		return;
+
+	/* acknowledge to "QT"
+	 * by holding pin at 1 for 10 uS */
+	*(vu_char *)MPC5XXX_WU_GPIO_DIR = PSC2_4;
+	__asm__ volatile ("sync");
+	*(vu_char *)MPC5XXX_WU_GPIO_DATA_O = PSC2_4;
+	__asm__ volatile ("sync");
+	udelay(10);
+
+	/* put ram out of self-refresh */
+	*(vu_long *)MPC5XXX_SDRAM_CTRL |= 0x80000000;	/* mode_en */
+	__asm__ volatile ("sync");
+	*(vu_long *)MPC5XXX_SDRAM_CTRL |= 0x50000000;	/* cke ref_en */
+	__asm__ volatile ("sync");
+	*(vu_long *)MPC5XXX_SDRAM_CTRL &= ~0x80000000;	/* !mode_en */
+	__asm__ volatile ("sync");
+	udelay(10); /* wait a bit */
+
+	/* jump back to linux kernel code */
+	linux_wakeup = SAVED_ADDR;
+	printf("\n\nLooks like we just woke, transferring control to 0x%08lx\n",
+			linux_wakeup);
+	linux_wakeup();
+}
+#else
+#define lite5200b_wakeup()
+#endif
+
 #ifndef CFG_RAMBOOT
 static void sdram_start (int hi_addr)
 {
@@ -208,6 +255,8 @@ long int initdram (int board_type)
 		__asm__ volatile ("sync");
 	}
 
+	lite5200b_wakeup();
+
 	return dramsize + dramsize2;
 }
 
diff --git a/common/cmd_ide.c b/common/cmd_ide.c
index b4119f3..ce99a41 100644
--- a/common/cmd_ide.c
+++ b/common/cmd_ide.c
@@ -423,7 +423,7 @@ int do_diskboot (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 		}
 		part = simple_strtoul(++ep, NULL, 16);
 	}
-	if (get_partition_info (ide_dev_desc, part, &info)) {
+	if (get_partition_info (&ide_dev_desc[dev], part, &info)) {
 		SHOW_BOOT_PROGRESS (-1);
 		return 1;
 	}
@@ -1344,7 +1344,7 @@ ulong ide_read (int device, lbaint_t blknr, ulong blkcnt, void *buffer)
 
 		++n;
 		++blknr;
-		buffer += ATA_SECTORWORDS;
+		buffer += ATA_BLOCKSIZE;
 	}
 IDE_READ_E:
 	ide_led (DEVICE_LED(device), 0);	/* LED off	*/
@@ -1428,7 +1428,7 @@ ulong ide_write (int device, lbaint_t blknr, ulong blkcnt, void *buffer)
 		c = ide_inb (device, ATA_STATUS);	/* clear IRQ */
 		++n;
 		++blknr;
-		buffer += ATA_SECTORWORDS;
+		buffer += ATA_BLOCKSIZE;
 	}
 WR_OUT:
 	ide_led (DEVICE_LED(device), 0);	/* LED off	*/
@@ -2052,7 +2052,7 @@ ulong atapi_read (int device, lbaint_t blknr, ulong blkcnt, void *buffer)
 		n+=cnt;
 		blkcnt-=cnt;
 		blknr+=cnt;
-		buffer+=cnt*(ATAPI_READ_BLOCK_SIZE/4); /* ulong blocksize in ulong */
+		buffer+=(cnt*ATAPI_READ_BLOCK_SIZE);
 	} while (blkcnt > 0);
 	return (n);
 }
diff --git a/common/cmd_scsi.c b/common/cmd_scsi.c
index da36ed9..00b84fa 100644
--- a/common/cmd_scsi.c
+++ b/common/cmd_scsi.c
@@ -248,7 +248,7 @@ int do_scsiboot (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 		}
 		part = simple_strtoul(++ep, NULL, 16);
 	}
-	if (get_partition_info (scsi_dev_desc, part, &info)) {
+	if (get_partition_info (&scsi_dev_desc[dev], part, &info)) {
 		printf("error reading partinfo\n");
 		return 1;
 	}
diff --git a/cpu/ppc4xx/cpu.c b/cpu/ppc4xx/cpu.c
index 2d8740c..8e6bc84 100644
--- a/cpu/ppc4xx/cpu.c
+++ b/cpu/ppc4xx/cpu.c
@@ -125,6 +125,7 @@ int i2c_bootrom_enabled(void)
 	return (val & SDR0_SDCS_SDD);
 #endif
 }
+#endif
 
 #if defined(CONFIG_440GX)
 #define SDR0_PINSTP_SHIFT	29
@@ -178,16 +179,37 @@ static char *bootstrap_str[] = {
 };
 #endif
 
+#if defined(CONFIG_405EZ)
+#define SDR0_PINSTP_SHIFT	28
+static char *bootstrap_str[] = {
+	"EBC (8 bits)",
+	"SPI (fast)",
+	"NAND (512 page, 4 addr cycle)",
+	"I2C (Addr 0x50)",
+	"EBC (32 bits)",
+	"I2C (Addr 0x50)",
+	"NAND (2K page, 5 addr cycle)",
+	"I2C (Addr 0x50)",
+	"EBC (16 bits)",
+	"Reserved",
+	"NAND (2K page, 4 addr cycle)",
+	"I2C (Addr 0x50)",
+	"NAND (512 page, 3 addr cycle)",
+	"I2C (Addr 0x50)",
+	"SPI (slow)",
+	"I2C (Addr 0x50)",
+};
+#endif
+
 #if defined(SDR0_PINSTP_SHIFT)
 static int bootstrap_option(void)
 {
 	unsigned long val;
 
-	mfsdr(sdr_pinstp, val);
-	return ((val & 0xe0000000) >> SDR0_PINSTP_SHIFT);
+	mfsdr(SDR_PINSTP, val);
+	return ((val & 0xf0000000) >> SDR0_PINSTP_SHIFT);
 }
 #endif /* SDR0_PINSTP_SHIFT */
-#endif
 
 
 #if defined(CONFIG_440)
@@ -403,11 +425,11 @@ int checkcpu (void)
 
 #if defined(I2C_BOOTROM)
 	printf ("       I2C boot EEPROM %sabled\n", i2c_bootrom_enabled() ? "en" : "dis");
+#endif	/* I2C_BOOTROM */
 #if defined(SDR0_PINSTP_SHIFT)
 	printf ("       Bootstrap Option %c - ", (char)bootstrap_option() + 'A');
 	printf ("Boot ROM Location %s\n", bootstrap_str[bootstrap_option()]);
 #endif	/* SDR0_PINSTP_SHIFT */
-#endif	/* I2C_BOOTROM */
 
 #if defined(CONFIG_PCI)
 	printf ("       Internal PCI arbiter %sabled", pci_arbiter_enabled() ? "en" : "dis");
diff --git a/cpu/ppc4xx/i2c.c b/cpu/ppc4xx/i2c.c
index 8f4da86..47c264e 100644
--- a/cpu/ppc4xx/i2c.c
+++ b/cpu/ppc4xx/i2c.c
@@ -91,7 +91,6 @@ static void _i2c_bus_reset(void)
 
 void i2c_init(int speed, int slaveadd)
 {
-	sys_info_t sysInfo;
 	unsigned long freqOPB;
 	int val, divisor;
 	int bus;
@@ -124,8 +123,7 @@ void i2c_init(int speed, int slaveadd)
 
 		/* Clock divide Register */
 		/* get OPB frequency */
-		get_sys_info(&sysInfo);
-		freqOPB = sysInfo.freqPLB / sysInfo.pllOpbDiv;
+		freqOPB = get_OPB_freq();
 		/* set divisor according to freqOPB */
 		divisor = (freqOPB - 1) / 10000000;
 		if (divisor == 0)
diff --git a/doc/README.Lite5200B_low_power b/doc/README.Lite5200B_low_power
new file mode 100644
index 0000000..5b04fbb
--- /dev/null
+++ b/doc/README.Lite5200B_low_power
@@ -0,0 +1,22 @@
+Lite5200B wakeup from low-power mode (CONFIG_LITE5200B_PM)
+----------------------------------------------------------
+
+Low-power mode as described in Lite5200B User's Manual, means that
+with support of MC68HLC908QT1 microcontroller (refered to as QT),
+everything but the SDRAM can be powered down. This brings
+maximum power saving, while one can still restore previous state
+quickly.
+
+Quick overview where U-Boot comes into the picture:
+- OS saves device states
+- OS saves wakeup handler address to physical 0x0, puts SDRAM into
+  self-refresh and signals to QT, it should power down the board
+- / board is sleeping here /
+- someone presses SW4 (connected to QT)
+- U-Boot checks PSC2_4 pin, if QT drives it down, then we woke up,
+  so get SDRAM out of self-refresh and transfer control to OS
+  wakeup handler
+- OS restores device states
+
+This was tested on Linux with USB and Ethernet in use. Adding
+support for other devices is an OS issue.
diff --git a/include/configs/katmai.h b/include/configs/katmai.h
index 1606d0d..7f55366 100644
--- a/include/configs/katmai.h
+++ b/include/configs/katmai.h
@@ -78,7 +78,7 @@
 #define CONFIG_PCI_SYS_MEM_PHYS	CFG_SDRAM_BASE
 #define CONFIG_PCI_SYS_MEM_SIZE	(1024 * 1024 * 1024)
 
-#define CFG_ACE_BASE		0xe0000000	/* Xilinx ACE controller - Compact Flash */
+#define CFG_ACE_BASE		0xfe000000	/* Xilinx ACE controller - Compact Flash */
 
 /*-----------------------------------------------------------------------
  * Initial RAM & stack pointer (placed in internal SRAM)
diff --git a/include/ppc405.h b/include/ppc405.h
index 08f10d2..a2503a9 100644
--- a/include/ppc405.h
+++ b/include/ppc405.h
@@ -570,6 +570,8 @@
 #define SDR_ICTX0_STAT	0x40000000
 #define SDR_ICTX1_STAT	0x20000000
 
+#define SDR_PINSTP	0x40
+
 /******************************************************************************
  * Control
  ******************************************************************************/
diff --git a/include/ppc440.h b/include/ppc440.h
index 51e6b9b..bc1d7aa 100644
--- a/include/ppc440.h
+++ b/include/ppc440.h
@@ -148,7 +148,7 @@
 #define sdrcfgd		(SDR_DCR_BASE+0x1)
 #define sdr_sdstp0	0x0020	    /* */
 #define sdr_sdstp1	0x0021	    /* */
-#define sdr_pinstp	0x0040
+#define SDR_PINSTP	0x0040
 #define sdr_sdcs	0x0060
 #define sdr_ecid0	0x0080
 #define sdr_ecid1	0x0081