Additional fix for external IRQ config on Yellowstone & Yosemite

Patch by Stefan Roese, 03 Nov 2005

3 files changed, 41 insertions, 38 deletions

diff --git a/CHANGELOG b/CHANGELOG
index 74659b6..e7606ee 100644
--- a/CHANGELOG
+++ b/CHANGELOG
@@ -2,6 +2,9 @@
 Changes for U-Boot 1.1.4:
 ======================================================================
 
+* Additional fix for external IRQ config on Yellowstone & Yosemite
+  Patch by Stefan Roese, 03 Nov 2005
+
 * Add support for Ocotea pass 3 with 440GX Rev. F
   Patch by Stefan Roese, 01 Nov 2005
 
diff --git a/board/amcc/yellowstone/yellowstone.c b/board/amcc/yellowstone/yellowstone.c
index c2b7cf1..7ca60b6 100644
--- a/board/amcc/yellowstone/yellowstone.c
+++ b/board/amcc/yellowstone/yellowstone.c
@@ -56,25 +56,6 @@ int board_early_init_f(void)
 	mtebc(pb5cr, 0x00000000);
 
 	/*--------------------------------------------------------------------
-	 * Setup the interrupt controller polarities, triggers, etc.
-	 *-------------------------------------------------------------------*/
-	mtdcr(uic0sr, 0xffffffff);	/* clear all */
-	mtdcr(uic0er, 0x00000000);	/* disable all */
-	mtdcr(uic0cr, 0x00000009);	/* ATI & UIC1 crit are critical */
-	mtdcr(uic0pr, 0xfffffe13);	/* per ref-board manual */
-	mtdcr(uic0tr, 0x01c00008);	/* per ref-board manual */
-	mtdcr(uic0vr, 0x00000001);	/* int31 highest, base=0x000 */
-	mtdcr(uic0sr, 0xffffffff);	/* clear all */
-
-	mtdcr(uic1sr, 0xffffffff);	/* clear all */
-	mtdcr(uic1er, 0x00000000);	/* disable all */
-	mtdcr(uic1cr, 0x00000000);	/* all non-critical */
-	mtdcr(uic1pr, 0xffffe0ff);	/* per ref-board manual */
-	mtdcr(uic1tr, 0x00ffc000);	/* per ref-board manual */
-	mtdcr(uic1vr, 0x00000001);	/* int31 highest, base=0x000 */
-	mtdcr(uic1sr, 0xffffffff);	/* clear all */
-
-	/*--------------------------------------------------------------------
 	 * Setup the GPIO pins
 	 *-------------------------------------------------------------------*/
 	/*CPLD cs */
@@ -110,6 +91,25 @@ int board_early_init_f(void)
 #endif
 
 	/*--------------------------------------------------------------------
+	 * Setup the interrupt controller polarities, triggers, etc.
+	 *-------------------------------------------------------------------*/
+	mtdcr(uic0sr, 0xffffffff);	/* clear all */
+	mtdcr(uic0er, 0x00000000);	/* disable all */
+	mtdcr(uic0cr, 0x00000009);	/* ATI & UIC1 crit are critical */
+	mtdcr(uic0pr, 0xfffffe13);	/* per ref-board manual */
+	mtdcr(uic0tr, 0x01c00008);	/* per ref-board manual */
+	mtdcr(uic0vr, 0x00000001);	/* int31 highest, base=0x000 */
+	mtdcr(uic0sr, 0xffffffff);	/* clear all */
+
+	mtdcr(uic1sr, 0xffffffff);	/* clear all */
+	mtdcr(uic1er, 0x00000000);	/* disable all */
+	mtdcr(uic1cr, 0x00000000);	/* all non-critical */
+	mtdcr(uic1pr, 0xffffe0ff);	/* per ref-board manual */
+	mtdcr(uic1tr, 0x00ffc000);	/* per ref-board manual */
+	mtdcr(uic1vr, 0x00000001);	/* int31 highest, base=0x000 */
+	mtdcr(uic1sr, 0xffffffff);	/* clear all */
+
+	/*--------------------------------------------------------------------
 	 * Setup other serial configuration
 	 *-------------------------------------------------------------------*/
 	mfsdr(sdr_pci0, reg);
diff --git a/board/amcc/yosemite/yosemite.c b/board/amcc/yosemite/yosemite.c
index 03b412b..bc3d85b 100644
--- a/board/amcc/yosemite/yosemite.c
+++ b/board/amcc/yosemite/yosemite.c
@@ -56,25 +56,6 @@ int board_early_init_f(void)
 	mtebc(pb5cr, 0x00000000);
 
 	/*--------------------------------------------------------------------
-	 * Setup the interrupt controller polarities, triggers, etc.
-	 *-------------------------------------------------------------------*/
-	mtdcr(uic0sr, 0xffffffff);	/* clear all */
-	mtdcr(uic0er, 0x00000000);	/* disable all */
-	mtdcr(uic0cr, 0x00000009);	/* ATI & UIC1 crit are critical */
-	mtdcr(uic0pr, 0xfffffe13);	/* per ref-board manual */
-	mtdcr(uic0tr, 0x01c00008);	/* per ref-board manual */
-	mtdcr(uic0vr, 0x00000001);	/* int31 highest, base=0x000 */
-	mtdcr(uic0sr, 0xffffffff);	/* clear all */
-
-	mtdcr(uic1sr, 0xffffffff);	/* clear all */
-	mtdcr(uic1er, 0x00000000);	/* disable all */
-	mtdcr(uic1cr, 0x00000000);	/* all non-critical */
-	mtdcr(uic1pr, 0xffffe0ff);	/* per ref-board manual */
-	mtdcr(uic1tr, 0x00ffc000);	/* per ref-board manual */
-	mtdcr(uic1vr, 0x00000001);	/* int31 highest, base=0x000 */
-	mtdcr(uic1sr, 0xffffffff);	/* clear all */
-
-	/*--------------------------------------------------------------------
 	 * Setup the GPIO pins
 	 *-------------------------------------------------------------------*/
 	/*CPLD cs */
@@ -108,6 +89,25 @@ int board_early_init_f(void)
 	out32(GPIO0_ISR2H, in32(GPIO0_ISR2H) | 0x00000500);
 
 	/*--------------------------------------------------------------------
+	 * Setup the interrupt controller polarities, triggers, etc.
+	 *-------------------------------------------------------------------*/
+	mtdcr(uic0sr, 0xffffffff);	/* clear all */
+	mtdcr(uic0er, 0x00000000);	/* disable all */
+	mtdcr(uic0cr, 0x00000009);	/* ATI & UIC1 crit are critical */
+	mtdcr(uic0pr, 0xfffffe13);	/* per ref-board manual */
+	mtdcr(uic0tr, 0x01c00008);	/* per ref-board manual */
+	mtdcr(uic0vr, 0x00000001);	/* int31 highest, base=0x000 */
+	mtdcr(uic0sr, 0xffffffff);	/* clear all */
+
+	mtdcr(uic1sr, 0xffffffff);	/* clear all */
+	mtdcr(uic1er, 0x00000000);	/* disable all */
+	mtdcr(uic1cr, 0x00000000);	/* all non-critical */
+	mtdcr(uic1pr, 0xffffe0ff);	/* per ref-board manual */
+	mtdcr(uic1tr, 0x00ffc000);	/* per ref-board manual */
+	mtdcr(uic1vr, 0x00000001);	/* int31 highest, base=0x000 */
+	mtdcr(uic1sr, 0xffffffff);	/* clear all */
+
+	/*--------------------------------------------------------------------
 	 * Setup other serial configuration
 	 *-------------------------------------------------------------------*/
 	mfsdr(sdr_pci0, reg);