* Cleanup

* Patch by Mark Jonas, 05 Jul 2004:
  add support for the Total5100's and Total5200's LCD screen

* Patches by Dan Eisenhut, 01 Jul 2004:
  - README fixes.
  - Move doc2000.h include to prevent compiler warning on some boards

10 files changed, 257 insertions, 52 deletions

diff --git a/CHANGELOG b/CHANGELOG
index 1506e39..8daa3ba 100644
--- a/CHANGELOG
+++ b/CHANGELOG
@@ -2,6 +2,13 @@
 Changes since U-Boot 1.1.1:
 ======================================================================
 
+* Patch by Mark Jonas, 05 Jul 2004:
+  add support for the Total5100's and Total5200's LCD screen
+
+* Patches by Dan Eisenhut, 01 Jul 2004:
+  - README fixes.
+  - Move doc2000.h include to prevent compiler warning on some boards
+
 * Patch by Mark Jonas, 01 Jul 2004:
   Added support for Total5100 and Total5200 (Rev.1 and Rev.2)
   MGT5100 and MPC5200 based Freescale platforms.
diff --git a/README b/README
index 943d9e2..614c59f 100644
--- a/README
+++ b/README
@@ -596,13 +596,13 @@ The following options need to be configured:
 		-----------------------------------------------
 		CFG_CMD_ALL	all
 
-		CFG_CMD_DFL	Default configuration; at the moment
+		CONFIG_CMD_DFL	Default configuration; at the moment
 				this is includes all commands, except
 				the ones marked with "*" in the list
 				above.
 
 		If you don't define CONFIG_COMMANDS it defaults to
-		CFG_CMD_DFL in include/cmd_confdefs.h. A board can
+		CONFIG_CMD_DFL in include/cmd_confdefs.h. A board can
 		override the default settings in the respective
 		include file.
 
diff --git a/board/total5200/total5200.c b/board/total5200/total5200.c
index 24aaafc..4ec7b96 100644
--- a/board/total5200/total5200.c
+++ b/board/total5200/total5200.c
@@ -134,3 +134,177 @@ void ide_set_reset (int idereset)
 	}
 }
 #endif /* defined (CFG_CMD_IDE) && defined (CONFIG_IDE_RESET) */
+
+#ifdef CONFIG_VIDEO_SED13806
+#include <sed13806.h>
+
+#define DISPLAY_WIDTH   640
+#define DISPLAY_HEIGHT  480
+
+#ifdef CONFIG_VIDEO_SED13806_8BPP
+#error CONFIG_VIDEO_SED13806_8BPP not supported.
+#endif /* CONFIG_VIDEO_SED13806_8BPP */
+
+#ifdef CONFIG_VIDEO_SED13806_16BPP
+static const S1D_REGS init_regs [] =
+{
+    {0x0001,0x00},   /* Miscellaneous Register */
+    {0x01FC,0x00},   /* Display Mode Register */
+    {0x0004,0x00},   /* General IO Pins Configuration Register 0 */
+    {0x0005,0x00},   /* General IO Pins Configuration Register 1 */
+    {0x0008,0x00},   /* General IO Pins Control Register 0 */
+    {0x0009,0x00},   /* General IO Pins Control Register 1 */
+    {0x0010,0x02},   /* Memory Clock Configuration Register */
+    {0x0014,0x02},   /* LCD Pixel Clock Configuration Register */
+    {0x0018,0x02},   /* CRT/TV Pixel Clock Configuration Register */
+    {0x001C,0x02},   /* MediaPlug Clock Configuration Register */
+    {0x001E,0x01},   /* CPU To Memory Wait State Select Register */
+    {0x0021,0x03},   /* DRAM Refresh Rate Register */
+    {0x002A,0x00},   /* DRAM Timings Control Register 0 */
+    {0x002B,0x01},   /* DRAM Timings Control Register 1 */
+    {0x0020,0x80},   /* Memory Configuration Register */
+    {0x0030,0x25},   /* Panel Type Register */
+    {0x0031,0x00},   /* MOD Rate Register */
+    {0x0032,0x4F},   /* LCD Horizontal Display Width Register */
+    {0x0034,0x13},   /* LCD Horizontal Non-Display Period Register */
+    {0x0035,0x01},   /* TFT FPLINE Start Position Register */
+    {0x0036,0x0B},   /* TFT FPLINE Pulse Width Register */
+    {0x0038,0xDF},   /* LCD Vertical Display Height Register 0 */
+    {0x0039,0x01},   /* LCD Vertical Display Height Register 1 */
+    {0x003A,0x2C},   /* LCD Vertical Non-Display Period Register */
+    {0x003B,0x0A},   /* TFT FPFRAME Start Position Register */
+    {0x003C,0x01},   /* TFT FPFRAME Pulse Width Register */
+    {0x0040,0x05},   /* LCD Display Mode Register */
+    {0x0041,0x00},   /* LCD Miscellaneous Register */
+    {0x0042,0x00},   /* LCD Display Start Address Register 0 */
+    {0x0043,0x00},   /* LCD Display Start Address Register 1 */
+    {0x0044,0x00},   /* LCD Display Start Address Register 2 */
+    {0x0046,0x80},   /* LCD Memory Address Offset Register 0 */
+    {0x0047,0x02},   /* LCD Memory Address Offset Register 1 */
+    {0x0048,0x00},   /* LCD Pixel Panning Register */
+    {0x004A,0x00},   /* LCD Display FIFO High Threshold Control Register */
+    {0x004B,0x00},   /* LCD Display FIFO Low Threshold Control Register */
+    {0x0050,0x4F},   /* CRT/TV Horizontal Display Width Register */
+    {0x0052,0x13},   /* CRT/TV Horizontal Non-Display Period Register */
+    {0x0053,0x01},   /* CRT/TV HRTC Start Position Register */
+    {0x0054,0x0B},   /* CRT/TV HRTC Pulse Width Register */
+    {0x0056,0xDF},   /* CRT/TV Vertical Display Height Register 0 */
+    {0x0057,0x01},   /* CRT/TV Vertical Display Height Register 1 */
+    {0x0058,0x2B},   /* CRT/TV Vertical Non-Display Period Register */
+    {0x0059,0x09},   /* CRT/TV VRTC Start Position Register */
+    {0x005A,0x01},   /* CRT/TV VRTC Pulse Width Register */
+    {0x005B,0x10},   /* TV Output Control Register */
+    {0x0060,0x05},   /* CRT/TV Display Mode Register */
+    {0x0062,0x00},   /* CRT/TV Display Start Address Register 0 */
+    {0x0063,0x00},   /* CRT/TV Display Start Address Register 1 */
+    {0x0064,0x00},   /* CRT/TV Display Start Address Register 2 */
+    {0x0066,0x80},   /* CRT/TV Memory Address Offset Register 0 */
+    {0x0067,0x02},   /* CRT/TV Memory Address Offset Register 1 */
+    {0x0068,0x00},   /* CRT/TV Pixel Panning Register */
+    {0x006A,0x00},   /* CRT/TV Display FIFO High Threshold Control Register */
+    {0x006B,0x00},   /* CRT/TV Display FIFO Low Threshold Control Register */
+    {0x0070,0x00},   /* LCD Ink/Cursor Control Register */
+    {0x0071,0x01},   /* LCD Ink/Cursor Start Address Register */
+    {0x0072,0x00},   /* LCD Cursor X Position Register 0 */
+    {0x0073,0x00},   /* LCD Cursor X Position Register 1 */
+    {0x0074,0x00},   /* LCD Cursor Y Position Register 0 */
+    {0x0075,0x00},   /* LCD Cursor Y Position Register 1 */
+    {0x0076,0x00},   /* LCD Ink/Cursor Blue Color 0 Register */
+    {0x0077,0x00},   /* LCD Ink/Cursor Green Color 0 Register */
+    {0x0078,0x00},   /* LCD Ink/Cursor Red Color 0 Register */
+    {0x007A,0x1F},   /* LCD Ink/Cursor Blue Color 1 Register */
+    {0x007B,0x3F},   /* LCD Ink/Cursor Green Color 1 Register */
+    {0x007C,0x1F},   /* LCD Ink/Cursor Red Color 1 Register */
+    {0x007E,0x00},   /* LCD Ink/Cursor FIFO Threshold Register */
+    {0x0080,0x00},   /* CRT/TV Ink/Cursor Control Register */
+    {0x0081,0x01},   /* CRT/TV Ink/Cursor Start Address Register */
+    {0x0082,0x00},   /* CRT/TV Cursor X Position Register 0 */
+    {0x0083,0x00},   /* CRT/TV Cursor X Position Register 1 */
+    {0x0084,0x00},   /* CRT/TV Cursor Y Position Register 0 */
+    {0x0085,0x00},   /* CRT/TV Cursor Y Position Register 1 */
+    {0x0086,0x00},   /* CRT/TV Ink/Cursor Blue Color 0 Register */
+    {0x0087,0x00},   /* CRT/TV Ink/Cursor Green Color 0 Register */
+    {0x0088,0x00},   /* CRT/TV Ink/Cursor Red Color 0 Register */
+    {0x008A,0x1F},   /* CRT/TV Ink/Cursor Blue Color 1 Register */
+    {0x008B,0x3F},   /* CRT/TV Ink/Cursor Green Color 1 Register */
+    {0x008C,0x1F},   /* CRT/TV Ink/Cursor Red Color 1 Register */
+    {0x008E,0x00},   /* CRT/TV Ink/Cursor FIFO Threshold Register */
+    {0x0100,0x00},   /* BitBlt Control Register 0 */
+    {0x0101,0x00},   /* BitBlt Control Register 1 */
+    {0x0102,0x00},   /* BitBlt ROP Code/Color Expansion Register */
+    {0x0103,0x00},   /* BitBlt Operation Register */
+    {0x0104,0x00},   /* BitBlt Source Start Address Register 0 */
+    {0x0105,0x00},   /* BitBlt Source Start Address Register 1 */
+    {0x0106,0x00},   /* BitBlt Source Start Address Register 2 */
+    {0x0108,0x00},   /* BitBlt Destination Start Address Register 0 */
+    {0x0109,0x00},   /* BitBlt Destination Start Address Register 1 */
+    {0x010A,0x00},   /* BitBlt Destination Start Address Register 2 */
+    {0x010C,0x00},   /* BitBlt Memory Address Offset Register 0 */
+    {0x010D,0x00},   /* BitBlt Memory Address Offset Register 1 */
+    {0x0110,0x00},   /* BitBlt Width Register 0 */
+    {0x0111,0x00},   /* BitBlt Width Register 1 */
+    {0x0112,0x00},   /* BitBlt Height Register 0 */
+    {0x0113,0x00},   /* BitBlt Height Register 1 */
+    {0x0114,0x00},   /* BitBlt Background Color Register 0 */
+    {0x0115,0x00},   /* BitBlt Background Color Register 1 */
+    {0x0118,0x00},   /* BitBlt Foreground Color Register 0 */
+    {0x0119,0x00},   /* BitBlt Foreground Color Register 1 */
+    {0x01E0,0x00},   /* Look-Up Table Mode Register */
+    {0x01E2,0x00},   /* Look-Up Table Address Register */
+    {0x01E4,0x00},   /* Look-Up Table Data Register */
+    {0x01F0,0x00},   /* Power Save Configuration Register */
+    {0x01F1,0x00},   /* Power Save Status Register */
+    {0x01F4,0x00},   /* CPU-to-Memory Access Watchdog Timer Register */
+    {0x01FC,0x01},   /* Display Mode Register */
+    {0, 0}
+};
+#endif /* CONFIG_VIDEO_SED13806_16BPP */
+
+#ifdef CONFIG_CONSOLE_EXTRA_INFO
+/* Return text to be printed besides the logo. */
+void video_get_info_str (int line_number, char *info)
+{
+	if (line_number == 1) {
+#if CONFIG_MGT5100
+		strcpy (info, " Total5100");
+#elif CONFIG_TOTAL5200_REV==1
+		strcpy (info, " Total5200");
+#elif CONFIG_TOTAL5200_REV==2
+		strcpy (info, " Total5200 Rev.2");
+#else
+#error CONFIG_TOTAL5200_REV must be 1 or 2.
+#endif
+	} else {
+		info [0] = '\0';
+	}
+}
+#endif
+
+/* Returns  SED13806 base address. First thing called in the driver. */
+unsigned int board_video_init (void)
+{
+	return CFG_LCD_BASE;
+}
+
+/* Called after initializing the SED13806 and before clearing the screen. */
+void board_validate_screen (unsigned int base)
+{
+}
+
+/* Return a pointer to the initialization sequence. */
+const S1D_REGS *board_get_regs (void)
+{
+	return init_regs;
+}
+
+int board_get_width (void)
+{
+	return DISPLAY_WIDTH;
+}
+
+int board_get_height (void)
+{
+	return DISPLAY_HEIGHT;
+}
+
+#endif /* CONFIG_VIDEO_SED13806 */
diff --git a/board/tqm5200/tqm5200.c b/board/tqm5200/tqm5200.c
index 898f1f4..6383d9d 100644
--- a/board/tqm5200/tqm5200.c
+++ b/board/tqm5200/tqm5200.c
@@ -18,7 +18,7 @@
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
@@ -84,8 +84,8 @@ static void sdram_start (int hi_addr)
 
 /*
  * ATTENTION: Although partially referenced initdram does NOT make real use
- *            use of CFG_SDRAM_BASE. The code does not work if CFG_SDRAM_BASE
- *            is something else than 0x00000000.
+ *	      use of CFG_SDRAM_BASE. The code does not work if CFG_SDRAM_BASE
+ *	      is something else than 0x00000000.
  */
 
 #if defined(CONFIG_MPC5200)
@@ -352,7 +352,7 @@ int post_hotkeys_pressed(void)
 	/*
 	 * Configure PSC6_1 and PSC6_3 as GPIO. PSC6 then couldn't be used in
 	 * CODEC or UART mode. Consumer IrDA should still be possible.
-         */
+	 */
 	gpio->port_config &= ~(0x07000000);
 	gpio->port_config |=   0x03000000;
 
diff --git a/common/cmd_mem.c b/common/cmd_mem.c
index 2bdbc9d..e5c60bf 100644
--- a/common/cmd_mem.c
+++ b/common/cmd_mem.c
@@ -558,7 +558,7 @@ int do_mem_loopw (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 	volatile uint	*longp;
 	volatile ushort *shortp;
 	volatile u_char	*cp;
-	
+
 	if (argc < 4) {
 		printf ("Usage:\n%s\n", cmdtp->usage);
 		return 1;
@@ -580,7 +580,7 @@ int do_mem_loopw (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 
 	/* data to write */
 	data = simple_strtoul(argv[3], NULL, 16);
-	
+
 	/* We want to optimize the loops to run as fast as possible.
 	 * If we have only one object, just run infinite loops.
 	 */
diff --git a/common/cmd_reginfo.c b/common/cmd_reginfo.c
index a3af20f..15ac16a 100644
--- a/common/cmd_reginfo.c
+++ b/common/cmd_reginfo.c
@@ -281,54 +281,54 @@ int do_reginfo (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 	puts ("\nMPC5200 registers\n");
 	printf ("MBAR=%08x\n", CFG_MBAR);
 	puts ("Memory map registers\n");
-	printf ("\tCS0: start %08X\tstop %08X\tconfig %08X\ten %d\n", 
+	printf ("\tCS0: start %08X\tstop %08X\tconfig %08X\ten %d\n",
 		*(volatile ulong*)MPC5XXX_CS0_START,
 		*(volatile ulong*)MPC5XXX_CS0_STOP,
 		*(volatile ulong*)MPC5XXX_CS0_CFG,
 		(*(volatile ulong*)MPC5XXX_ADDECR & 0x00010000) ? 1 : 0);
-	printf ("\tCS1: start %08X\tstop %08X\tconfig %08X\ten %d\n", 
+	printf ("\tCS1: start %08X\tstop %08X\tconfig %08X\ten %d\n",
 		*(volatile ulong*)MPC5XXX_CS1_START,
 		*(volatile ulong*)MPC5XXX_CS1_STOP,
 		*(volatile ulong*)MPC5XXX_CS1_CFG,
 		(*(volatile ulong*)MPC5XXX_ADDECR & 0x00020000) ? 1 : 0);
-	printf ("\tCS2: start %08X\tstop %08X\tconfig %08X\ten %d\n", 
+	printf ("\tCS2: start %08X\tstop %08X\tconfig %08X\ten %d\n",
 		*(volatile ulong*)MPC5XXX_CS2_START,
 		*(volatile ulong*)MPC5XXX_CS2_STOP,
 		*(volatile ulong*)MPC5XXX_CS2_CFG,
 		(*(volatile ulong*)MPC5XXX_ADDECR & 0x00040000) ? 1 : 0);
-	printf ("\tCS3: start %08X\tstop %08X\tconfig %08X\ten %d\n", 
+	printf ("\tCS3: start %08X\tstop %08X\tconfig %08X\ten %d\n",
 		*(volatile ulong*)MPC5XXX_CS3_START,
 		*(volatile ulong*)MPC5XXX_CS3_STOP,
 		*(volatile ulong*)MPC5XXX_CS3_CFG,
 		(*(volatile ulong*)MPC5XXX_ADDECR & 0x00080000) ? 1 : 0);
-	printf ("\tCS4: start %08X\tstop %08X\tconfig %08X\ten %d\n", 
+	printf ("\tCS4: start %08X\tstop %08X\tconfig %08X\ten %d\n",
 		*(volatile ulong*)MPC5XXX_CS4_START,
 		*(volatile ulong*)MPC5XXX_CS4_STOP,
 		*(volatile ulong*)MPC5XXX_CS4_CFG,
 		(*(volatile ulong*)MPC5XXX_ADDECR & 0x00100000) ? 1 : 0);
-	printf ("\tCS5: start %08X\tstop %08X\tconfig %08X\ten %d\n", 
+	printf ("\tCS5: start %08X\tstop %08X\tconfig %08X\ten %d\n",
 		*(volatile ulong*)MPC5XXX_CS5_START,
 		*(volatile ulong*)MPC5XXX_CS5_STOP,
 		*(volatile ulong*)MPC5XXX_CS5_CFG,
 		(*(volatile ulong*)MPC5XXX_ADDECR & 0x00200000) ? 1 : 0);
-	printf ("\tCS6: start %08X\tstop %08X\tconfig %08X\ten %d\n", 
+	printf ("\tCS6: start %08X\tstop %08X\tconfig %08X\ten %d\n",
 		*(volatile ulong*)MPC5XXX_CS6_START,
 		*(volatile ulong*)MPC5XXX_CS6_STOP,
 		*(volatile ulong*)MPC5XXX_CS6_CFG,
 		(*(volatile ulong*)MPC5XXX_ADDECR & 0x04000000) ? 1 : 0);
-	printf ("\tCS7: start %08X\tstop %08X\tconfig %08X\ten %d\n", 
+	printf ("\tCS7: start %08X\tstop %08X\tconfig %08X\ten %d\n",
 		*(volatile ulong*)MPC5XXX_CS7_START,
 		*(volatile ulong*)MPC5XXX_CS7_STOP,
 		*(volatile ulong*)MPC5XXX_CS7_CFG,
 		(*(volatile ulong*)MPC5XXX_ADDECR & 0x08000000) ? 1 : 0);
-	printf ("\tBOOTCS: start %08X\tstop %08X\tconfig %08X\ten %d\n", 
+	printf ("\tBOOTCS: start %08X\tstop %08X\tconfig %08X\ten %d\n",
 		*(volatile ulong*)MPC5XXX_BOOTCS_START,
 		*(volatile ulong*)MPC5XXX_BOOTCS_STOP,
 		*(volatile ulong*)MPC5XXX_BOOTCS_CFG,
 		(*(volatile ulong*)MPC5XXX_ADDECR & 0x02000000) ? 1 : 0);
-	printf ("\tSDRAMCS0: %08X\n", 
+	printf ("\tSDRAMCS0: %08X\n",
 		*(volatile ulong*)MPC5XXX_SDRAM_CS0CFG);
-	printf ("\tSDRAMCS0: %08X\n", 
+	printf ("\tSDRAMCS0: %08X\n",
 		*(volatile ulong*)MPC5XXX_SDRAM_CS1CFG);
 #endif /* CONFIG_MPC5200 */
 	return 0;
diff --git a/common/docecc.c b/common/docecc.c
index cf45e0f..79adb48 100644
--- a/common/docecc.c
+++ b/common/docecc.c
@@ -28,13 +28,13 @@
 #include <common.h>
 #include <malloc.h>
 
-#include <linux/mtd/doc2000.h>
-
 #undef ECC_DEBUG
 #undef PSYCHO_DEBUG
 
 #if (CONFIG_COMMANDS & CFG_CMD_DOC)
 
+#include <linux/mtd/doc2000.h>
+
 /* need to undef it (from asm/termbits.h) */
 #undef B0
 
diff --git a/drivers/cfb_console.c b/drivers/cfb_console.c
index fee0386..138b968 100644
--- a/drivers/cfb_console.c
+++ b/drivers/cfb_console.c
@@ -1173,14 +1173,15 @@ int drv_video_init (void)
 
 	skip_dev_init = 0;
 
+	/* Init video chip - returns with framebuffer cleared */
+	if (video_init () == -1)
+		skip_dev_init = 1;
+
 	/* Force console i/o to serial ? */
 	if ((penv = getenv ("console")) != NULL)
 		if (strcmp (penv, "serial") == 0)
 			return 0;
 
-	/* Init video chip - returns with framebuffer cleared */
-	if (video_init () == -1)
-		skip_dev_init = 1;
 #ifdef CONFIG_VGA_AS_SINGLE_DEVICE
 	/* Devices VGA and Keyboard will be assigned seperately */
 	/* Init vga device */
diff --git a/include/configs/TQM5200.h b/include/configs/TQM5200.h
index 65eff42..4b27633 100644
--- a/include/configs/TQM5200.h
+++ b/include/configs/TQM5200.h
@@ -79,7 +79,7 @@
 #define CFG_RX_ETH_BUFFER	8  /* use 8 rx buffer on eepro100  */
 #define CONFIG_NS8382X		1
 
-#define ADD_PCI_CMD 		0 /* CFG_CMD_PCI */
+#define ADD_PCI_CMD		0 /* CFG_CMD_PCI */
 
 #else	/* MPC5100 */
 
@@ -96,10 +96,10 @@
 /* USB */
 #if 0
 #define CONFIG_USB_OHCI
-#define ADD_USB_CMD             CFG_CMD_USB | CFG_CMD_FAT
+#define ADD_USB_CMD		CFG_CMD_USB | CFG_CMD_FAT
 #define CONFIG_USB_STORAGE
 #else
-#define ADD_USB_CMD             0
+#define ADD_USB_CMD		0
 #endif
 
 /* POST support */
@@ -132,7 +132,7 @@
 				ADD_USB_CMD	| \
 				CFG_CMD_POST_DIAG | \
 				CFG_CMD_DATE	| \
-				CFG_CMD_REGINFO	| \
+				CFG_CMD_REGINFO | \
 				CFG_CMD_MII	| \
 				CFG_CMD_PING	| \
 				ADD_IDE_CMD)
@@ -141,7 +141,7 @@
 #include <cmd_confdefs.h>
 
 #if (TEXT_BASE == 0xFC000000)		/* Boot low */
-#   define CFG_LOWBOOT	        1
+#   define CFG_LOWBOOT		1
 #endif
 
 /*
@@ -149,14 +149,14 @@
  */
 #define CONFIG_BOOTDELAY	5	/* autoboot after 5 seconds */
 
-#define CONFIG_PREBOOT	"echo;"	\
+#define CONFIG_PREBOOT	"echo;" \
 	"echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \
 	"echo"
 
 #undef	CONFIG_BOOTARGS
 
 #if defined (CONFIG_TQM5200_AA)
-#define	CONFIG_EXTRA_ENV_SETTINGS					\
+#define CONFIG_EXTRA_ENV_SETTINGS					\
 	"netdev=eth0\0"							\
 	"nfsargs=setenv bootargs root=/dev/nfs rw "			\
 		"nfsroot=$(serverip):$(rootpath)\0"			\
@@ -174,13 +174,13 @@
 	"load=tftp 200000 $(loadfile)\0"				\
 	"load133=tftp 200000 $(loadfile133)\0"				\
 	"loadfile=u-boot_tqm5200_aa_mkr.bin\0"				\
-        "loadfile133=u-boot_tqm5200_aa_133_mkr.bin\0"			\
+	"loadfile133=u-boot_tqm5200_aa_133_mkr.bin\0"			\
 	"update=protect off 1:0-4; erase 1:0-4; cp.b 200000 0xfc000000 $(filesize); protect on 1:0-4\0"		\
 	"serverip=172.20.5.13\0"					\
 	""
 #else
 #if defined (CONFIG_TQM5200_AB)
-#define	CONFIG_EXTRA_ENV_SETTINGS					\
+#define CONFIG_EXTRA_ENV_SETTINGS					\
 	"netdev=eth0\0"							\
 	"nfsargs=setenv bootargs root=/dev/nfs rw "			\
 		"nfsroot=$(serverip):$(rootpath)\0"			\
@@ -198,13 +198,13 @@
 	"load=tftp 200000 $(loadfile)\0"				\
 	"load133=tftp 200000 $(loadfile133)\0"				\
 	"loadfile=u-boot_tqm5200_ab_mkr.bin\0"				\
-        "loadfile133=u-boot_tqm5200_ab_133_mkr.bin\0"			\
+	"loadfile133=u-boot_tqm5200_ab_133_mkr.bin\0"			\
 	"update=protect off 1:0-1; erase 1:0-1; cp.b 200000 0xfc000000 $(filesize); protect on 1:0-1\0"		\
 	"serverip=172.20.5.13\0"					\
 	""
 #else
 #if defined (CONFIG_TQM5200_AC)
-#define	CONFIG_EXTRA_ENV_SETTINGS					\
+#define CONFIG_EXTRA_ENV_SETTINGS					\
 	"netdev=eth0\0"							\
 	"nfsargs=setenv bootargs root=/dev/nfs rw "			\
 		"nfsroot=$(serverip):$(rootpath)\0"			\
@@ -222,7 +222,7 @@
 	"load=tftp 200000 $(loadfile)\0"				\
 	"load133=tftp 200000 $(loadfile133)\0"				\
 	"loadfile=u-boot_tqm5200_ac_mkr.bin\0"				\
-        "loadfile133=u-boot_tqm5200_ac_133_mkr.bin\0"			\
+	"loadfile133=u-boot_tqm5200_ac_133_mkr.bin\0"			\
 	"update=protect off 1:0-4; erase 1:0-4; cp.b 200000 0xfc000000 $(filesize); protect on 1:0-4\0"		\
 	"serverip=172.20.5.13\0"					\
 	""
@@ -235,7 +235,7 @@
 /*
  * IPB Bus clocking configuration.
  */
-#define CFG_IPBSPEED_133   		/* define for 133MHz speed */
+#define CFG_IPBSPEED_133		/* define for 133MHz speed */
 
 #if defined(CFG_IPBSPEED_133)
 /*
@@ -328,8 +328,8 @@
 #endif	/* CFG_LOWBOOT */
 #define CFG_MAX_FLASH_BANKS	1	/* max num of flash banks
 					   (= chip selects) */
-#define CFG_FLASH_ERASE_TOUT	240000	/* Flash Erase Timeout (in ms)  */
-#define CFG_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (in ms)  */
+#define CFG_FLASH_ERASE_TOUT	240000	/* Flash Erase Timeout (in ms)	*/
+#define CFG_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (in ms)	*/
 
 
 /*
@@ -387,8 +387,8 @@
  *	Bit 0 (mask: 0x80000000): 1
  * use ALT CAN position: Bits 2-3 (mask: 0x30000000):
  *	00 -> No Alternatives, I2C1 is used for onboard EEPROM
- *      01 -> CAN1 on I2C1, CAN2 on Tmr0/1 do not use on TQM5200 with onboard
- *            EEPROM
+ *	01 -> CAN1 on I2C1, CAN2 on Tmr0/1 do not use on TQM5200 with onboard
+ *	      EEPROM
  * use PSC1 as UART: Bits 28-31 (mask: 0x00000007): 0100
  * use PSC6_1 and PSC6_3 as GPIO: Bits 9:11 (mask: 0x07000000):
  *	011 -> PSC6 could not be used as UART or CODEC. IrDA still possible.
@@ -495,12 +495,12 @@
  *-----------------------------------------------------------------------
  */
 
-#undef  CONFIG_IDE_8xx_PCCARD		/* Use IDE with PC Card	Adapter	*/
+#undef	CONFIG_IDE_8xx_PCCARD		/* Use IDE with PC Card Adapter */
 
-#undef	CONFIG_IDE_8xx_DIRECT		/* Direct IDE    not supported	*/
-#undef	CONFIG_IDE_LED			/* LED   for ide not supported	*/
+#undef	CONFIG_IDE_8xx_DIRECT		/* Direct IDE	 not supported	*/
+#undef	CONFIG_IDE_LED			/* LED	 for ide not supported	*/
 
-#define	CONFIG_IDE_RESET		/* reset for ide supported	*/
+#define CONFIG_IDE_RESET		/* reset for ide supported	*/
 #define CONFIG_IDE_PREINIT
 
 #define CFG_IDE_MAXBUS		1	/* max. 1 IDE bus		*/
@@ -519,7 +519,7 @@
 /* Offset for alternate registers	*/
 #define CFG_ATA_ALT_OFFSET	(0x005C)
 
-/* Interval between registers                                                */
-#define CFG_ATA_STRIDE          4
+/* Interval between registers						     */
+#define CFG_ATA_STRIDE		4
 
 #endif /* __CONFIG_H */
diff --git a/include/configs/Total5200.h b/include/configs/Total5200.h
index 29c627c..830bf81 100644
--- a/include/configs/Total5200.h
+++ b/include/configs/Total5200.h
@@ -60,6 +60,25 @@
 #define CONFIG_BAUDRATE		115200	/* ... at 115200 bps */
 #define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
 
+/*
+ * Video console
+ */
+#if 1
+#define CONFIG_VIDEO_SED13806
+#define CONFIG_VIDEO_SED13806_16BPP
+
+#define CONFIG_CFB_CONSOLE
+#define CONFIG_VIDEO_LOGO
+/* #define CONFIG_VIDEO_BMP_LOGO */
+#define CONFIG_CONSOLE_EXTRA_INFO
+#define CONFIG_VGA_AS_SINGLE_DEVICE
+#define CONFIG_VIDEO_SW_CURSOR
+#define CONFIG_SPLASH_SCREEN
+
+#define ADD_VIDEO_CMD	CFG_CMD_BMP
+#else
+#define ADD_VIDEO_CMD	0
+#endif
 
 #ifdef CONFIG_MPC5200	/* MGT5100 PCI is not supported yet. */
 /*
@@ -114,6 +133,7 @@
 				 CFG_CMD_EEPROM	| \
 				 CFG_CMD_FAT	| \
 				 CFG_CMD_IDE	| \
+				 ADD_VIDEO_CMD  | \
 				 ADD_PCI_CMD	| \
 				 ADD_USB_CMD)
 
@@ -129,7 +149,9 @@
  */
 #define CONFIG_BOOTDELAY	5	/* autoboot after 5 seconds */
 
-#define CONFIG_PREBOOT	"echo;"	\
+#define CONFIG_PREBOOT	\
+	"setenv stdout serial;setenv stderr serial;" \
+	"echo;" \
 	"echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \
 	"echo"
 
@@ -150,6 +172,7 @@
 	"net_nfs=tftp 200000 $(bootfile);run nfsargs addip;bootm\0"	\
 	"rootpath=/opt/eldk/ppc_82xx\0"					\
 	"bootfile=/tftpboot/MPC5200/uImage\0"				\
+	"console=serial\0"				\
 	""
 
 #define CONFIG_BOOTCOMMAND	"run flash_self"
@@ -201,7 +224,7 @@
 #   define CFG_FLASH_SIZE	0x06000000
 #endif /* CONFIG_TOTAL5200_REV */
 
-#if !defined(CFG_LOWBOOT)
+#if defined(CFG_LOWBOOT)
 #   define CFG_ENV_ADDR		0xFE040000
 #else	/* CFG_LOWBOOT */
 #   define CFG_ENV_ADDR		0xFFF40000
@@ -223,7 +246,7 @@
 #define CFG_MBAR		0xF0000000	/*   64 kB */
 #define CFG_FPGA_BASE		0xF0010000	/*   64 kB */
 #define CFG_CPLD_BASE		0xF0020000	/*   64 kB */
-#define CFG_LCD_BASE		0xF0100000	/* 2048 kB */
+#define CFG_LCD_BASE		0xF1000000	/* 4096 kB */
 
 /* Use SRAM until RAM will be available */
 #define CFG_INIT_RAM_ADDR	MPC5XXX_SRAM
@@ -332,8 +355,8 @@
 #define CFG_CS1_CFG		0x0019FF00	/* 25WS, MX, AL, AA, CE, AS_25, DS_32 */
 
 #define CFG_CS2_START		CFG_LCD_BASE
-#define CFG_CS2_SIZE		0x00200000	/* 2048 kB */
-#define CFG_CS2_CFG		0x0019FD00	/* 25WS, MX, AL, AA, CE, AS_25, DS_16 */
+#define CFG_CS2_SIZE		0x00400000	/* 4096 kB */
+#define CFG_CS2_CFG		0x0032FD00	/* 50WS, MX, AL, AA, CE, AS_25, DS_16 */
 
 #if CONFIG_TOTAL5200_REV==1
 #   define CFG_CS3_START	CFG_CPLD_BASE