Merge with /home/wd/git/u-boot/custodian/u-boot-74xx-7xx

25 files changed, 4388 insertions, 56 deletions

diff --git a/MAKEALL b/MAKEALL
index 47f2030..0f0ec29 100755
--- a/MAKEALL
+++ b/MAKEALL
@@ -155,6 +155,7 @@ LIST_85xx="	\
 LIST_74xx="	\
 	DB64360		DB64460		EVB64260	P3G4		\
 	p3m7448		PCIPPC2		PCIPPC6		ZUMA		\
+	mpc7448hpc2
 "
 
 LIST_7xx="	\
diff --git a/Makefile b/Makefile
index e45c917..9a27bc2 100644
--- a/Makefile
+++ b/Makefile
@@ -1819,6 +1819,9 @@ EVB64260_config	\
 EVB64260_750CX_config:	unconfig
 	@$(MKCONFIG) EVB64260 ppc 74xx_7xx evb64260
 
+mpc7448hpc2_config:  unconfig
+	@$(MKCONFIG) $(@:_config=) ppc 74xx_7xx mpc7448hpc2
+
 P3G4_config: unconfig
 	@$(MKCONFIG) $(@:_config=) ppc 74xx_7xx evb64260
 
diff --git a/README b/README
index 87d6d10..90ef2c2 100644
--- a/README
+++ b/README
@@ -2398,17 +2398,17 @@ configurations; the following names are supported:
 	csb272_config		lwmon_config		sbc8260_config
 	CU824_config		MBX860T_config		sbc8560_33_config
 	DUET_ADS_config		MBX_config		sbc8560_66_config
-	EBONY_config		MPC8260ADS_config	SM850_config
-	ELPT860_config		MPC8540ADS_config	SPD823TS_config
-	ESTEEM192E_config	MPC8540EVAL_config	stxgp3_config
-	ETX094_config		MPC8560ADS_config	SXNI855T_config
-	FADS823_config		NETVIA_config		TQM823L_config
-	FADS850SAR_config	omap1510inn_config	TQM850L_config
-	FADS860T_config		omap1610h2_config	TQM855L_config
-	FPS850L_config		omap1610inn_config	TQM860L_config
-				omap5912osk_config	walnut_config
-				omap2420h4_config	Yukon8220_config
-							ZPC1900_config
+	EBONY_config		mpc7448hpc2_config	SM850_config
+	ELPT860_config		MPC8260ADS_config	SPD823TS_config
+	ESTEEM192E_config	MPC8540ADS_config	stxgp3_config
+	ETX094_config		MPC8540EVAL_config	SXNI855T_config
+	FADS823_config		NMPC8560ADS_config	TQM823L_config
+	FADS850SAR_config	NETVIA_config		TQM850L_config
+	FADS860T_config		omap1510inn_config	TQM855L_config
+	FPS850L_config		omap1610h2_config	TQM860L_config
+				omap1610inn_config	walnut_config
+				omap5912osk_config	Yukon8220_config
+				omap2420h4_config	ZPC1900_config
 
 Note: for some board special configuration names may exist; check if
       additional information is available from the board vendor; for
diff --git a/board/mpc7448hpc2/Makefile b/board/mpc7448hpc2/Makefile
new file mode 100644
index 0000000..e3d757d
--- /dev/null
+++ b/board/mpc7448hpc2/Makefile
@@ -0,0 +1,52 @@
+#
+# (C) Copyright 2000
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= $(obj)lib$(BOARD).a
+
+COBJS	:= $(BOARD).o tsi108_init.o
+SOBJS	:= asm_init.o
+
+SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS	:= $(addprefix $(obj),$(COBJS))
+SOBJS	:= $(addprefix $(obj),$(SOBJS))
+
+$(LIB):	$(obj).depend $(OBJS) $(SOBJS)
+	$(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+
+clean:
+	rm -f $(SOBJS) $(OBJS)
+
+.PHONY: distclean
+distclean:	clean
+	rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude ($obj).depend
+
+#########################################################################
diff --git a/board/mpc7448hpc2/asm_init.S b/board/mpc7448hpc2/asm_init.S
new file mode 100644
index 0000000..a7a40a1
--- /dev/null
+++ b/board/mpc7448hpc2/asm_init.S
@@ -0,0 +1,918 @@
+/*
+ * (C) Copyright 2004-05;  Tundra Semiconductor Corp.
+ *
+ * Added automatic detect of SDC settings
+ * Copyright (c) 2005 Freescale Semiconductor, Inc.
+ * Maintainer tie-fei.zang@freescale.com
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * FILENAME: asm_init.s
+ *
+ * Originator: Alex Bounine
+ *
+ * DESCRIPTION:
+ * Initialization code for the Tundra Tsi108 bridge chip
+ *
+ */
+
+#include <config.h>
+#include <version.h>
+
+#include <ppc_asm.tmpl>
+#include <ppc_defs.h>
+#include <asm/processor.h>
+
+#include <tsi108.h>
+
+/*
+ * Build Configuration Options
+ */
+
+/* #define DISABLE_PBM		disables usage of PB Master */
+/* #define SDC_HARDCODED_INIT	config SDRAM controller with hardcoded values */
+/* #define SDC_AUTOPRECH_EN	enable SDRAM auto precharge */
+
+/*
+ * Hardcoded SDC settings
+ */
+
+#ifdef SDC_HARDCODED_INIT
+
+/* Micron MT9HTF6472AY-40EA1 : Unbuffered, 512MB, 400, CL3, Single Rank */
+
+#define VAL_SD_REFRESH	(0x61A)
+#define VAL_SD_TIMING	(0x0308336b)
+#define VAL_SD_D0_CTRL	(0x07100021)	/* auto-precharge disabled */
+#define VAL_SD_D0_BAR	(0x0FE00000)	/* 512MB @ 0x00000000 */
+#define VAL_SD_D1_CTRL	(0x07100021)	/* auto-precharge disabled */
+#define VAL_SD_D1_BAR	(0x0FE00200)	/* 512MB @ 0x20000000 */
+
+#endif /* SDC_HARDCODED_INIT */
+
+/*
+ CPU Configuration:
+
+ CPU Address and Data Parity enables.
+
+#define CPU_AP
+#define CPU_DP
+*/
+
+/*
+ * Macros
+ * !!! Attention !!! Macros LOAD_PTR, LOAD_U32 and LOAD_MEM defined below are
+ * expected to work correctly for the CSR space within 32KB range.
+ *
+ * LOAD_PTR and LOAD_U32 - load specified register with a 32 bit constant.
+ * These macros are absolutely identical except their names. This difference
+ * is provided intentionally for better readable code.
+ */
+
+#define LOAD_PTR(reg,const32) \
+	addis reg,r0,const32@h; ori reg,reg,const32@l
+
+#define LOAD_U32(reg,const32) \
+	addis reg,r0,const32@h; ori reg,reg,const32@l
+
+/* LOADMEM initializes a register with the contents of a specified 32-bit
+ * memory location, usually a CSR value.
+ */
+
+#define LOAD_MEM(reg,addr32) \
+	addis reg,r0,addr32@ha; lwz reg,addr32@l(reg)
+
+#ifndef SDC_HARDCODED_INIT
+sdc_clk_sync:
+	/* MHz: 0,0,183,100,133,167,200,233 */
+	.long	0, 0, 6, 10, 8, 6, 5, 4		/* nSec */
+#endif
+
+/*
+ * board_asm_init() - early initialization function. Coded to be portable to
+ * dual-CPU configuration.
+ * Checks CPU number and performs board HW initialization if called for CPU0.
+ * Registers used: r3,r4,r5,r6,r19,r29
+ *
+ * NOTE: For dual-CPU configuration only CPU0 is allowed to configure Tsi108
+ * and the rest of the board. Current implementation demonstrates two
+ * possible ways to identify CPU number:
+ * - for MPC74xx platform: uses MSSCR0[ID] bit as defined in UM.
+ * - for PPC750FX/GX boards: uses WHO_AM_I bit reported by Tsi108.
+ */
+
+	.globl board_asm_init
+board_asm_init:
+	mflr	r19	/* Save LR to be able return later. */
+	bl	icache_enable	/* Enable icache to reduce reads from flash. */
+
+/* Initialize pointer to Tsi108 register space */
+
+	LOAD_PTR(r29,CFG_TSI108_CSR_RST_BASE)/* r29 - pointer to tsi108 CSR space */
+	ori r4,r29,TSI108_PB_REG_OFFSET
+
+/* Check Processor Version Number */
+
+	mfspr	r3, PVR
+	rlwinm	r3,r3,16,16,23	/* get ((Processor Version Number) & 0xFF00) */
+
+	cmpli	0,0,r3,0x8000	/* MPC74xx */
+	bne	cont_brd_init
+
+	/*
+	 * For MPC744x/5x enable extended BATs[4-7]
+	 * Sri: Set HIGH_BAT_EN and XBSEN, and SPD =1
+	 * to disable prefetch
+	 */
+
+	mfspr	r5, HID0
+	oris	r5, r5, 0x0080	/* Set HID0[HIGH_BAT_EN] bit #8 */
+	ori	r5, r5, 0x0380	/* Set SPD,XBSEN,SGE bits #22,23,24 */
+	mtspr	HID0, r5
+	isync
+	sync
+
+	/* Adding code to disable external interventions in MPX bus mode */
+	mfspr	r3, 1014
+	oris	r3, r3, 0x0100	/* Set the EIDIS bit in MSSCR0:  bit 7 */
+	mtspr	1014, r3
+	isync
+	sync
+
+	/* Sri: code to enable FP unit */
+	mfmsr	r3
+	ori	r3, r3, 0x2000
+	mtmsr	r3
+	isync
+	sync
+
+	/* def CONFIG_DUAL_CPU
+	 * For MPC74xx processor, use MSSCR0[ID] bit to identify CPU number.
+	 */
+#if(1)
+	mfspr	r3,1014		/* read MSSCR0 */
+	rlwinm.	r3,r3,27,31,31	/* get processor ID number */
+	mtspr	SPRN_PIR,r3	/* Save CPU ID */
+	sync
+	bne	init_done
+	b	do_tsi108_init
+
+cont_brd_init:
+
+	/* An alternative method of checking the processor number (in addition
+	 * to configuration using MSSCR0[ID] bit on MPC74xx).
+	 * Good for IBM PPC750FX/GX.
+	 */
+
+	lwz	r3,PB_BUS_MS_SELECT(r4)	/* read PB_ID register */
+	rlwinm.	r3,r3,24,31,31		/* get processor ID number */
+	bne init_done
+#else
+
+cont_brd_init:
+
+#endif /* CONFIG_DUAL_CPU */
+
+	/* Initialize Tsi108 chip */
+
+do_tsi108_init:
+
+	/*
+	 * Adjust HLP/Flash parameters. By default after reset the HLP port is
+	 * set to support slow devices. Better performance can be achived when
+	 * an optimal parameters are used for specific EPROM device.
+	 * NOTE: This should be performed ASAP for the emulation platform
+	 * because it has 5MHz HLP clocking.
+	 */
+
+#ifdef CONFIG_TSI108EMU
+	ori	r4,r29,TSI108_HLP_REG_OFFSET
+	LOAD_U32(r5,0x434422c0)
+	stw	r5,0x08(r4)	/* set HLP B0_CTRL0 */
+	sync
+	LOAD_U32(r5,0xd0012000)
+	stw	r5,0x0c(r4)		/* set HLP B0_CTRL1 */
+	sync
+#endif
+
+	/* Initialize PB interface. */
+
+	ori r4,r29,TSI108_PB_REG_OFFSET
+
+#if (CFG_TSI108_CSR_BASE != CFG_TSI108_CSR_RST_BASE)
+	/* Relocate (if required) Tsi108 registers. Set new value for
+	 * PB_REG_BAR:
+	 * Note we are in the 32-bit address mode.
+	 */
+	LOAD_U32(r5,(CFG_TSI108_CSR_BASE | 0x01)) /* PB_REG_BAR: BA + EN */
+	stw	r5,PB_REG_BAR(r4)
+	andis.	r29,r5,0xFFFF
+	sync
+	ori	r4,r29,TSI108_PB_REG_OFFSET
+#endif
+
+	/* Set PB Slave configuration register */
+
+	LOAD_U32(r5,0x00002481)	/* PB_SCR: TEA enabled,AACK delay = 1 */
+	lwz	r3, PB_RSR(r4)	/* get PB bus mode */
+	xori	r3,r3,0x0001	/* mask PB_BMODE: r3 -> (0 = 60X, 1 = MPX) */
+	rlwimi  r5,r3,14,17,17	/* for MPX: set DTI_MODE bit */
+	stw	r5,PB_SCR(r4)
+	sync
+
+	/* Configure PB Arbiter */
+
+	lwz	r5,PB_ARB_CTRL(r4)	/* Read PB Arbiter Control Register */
+	li	r3, 0x00F0		/* ARB_PIPELINE_DEP mask */
+#ifdef DISABLE_PBM
+	ori	r3,r3,0x1000	/* add PBM_EN to clear (enabled by default) */
+#endif
+	andc	r5,r5,r3	/* Clear the masked bit fields */
+	ori	r5,r5,0x0001	/* Set pipeline depth */
+	stw	r5,PB_ARB_CTRL(r4)
+
+#if (0)	/* currently using the default settings for PBM after reset */
+	LOAD_U32(r5,0x)		/* value for PB_MCR */
+	stw	r5,PB_MCR(r4)
+	sync
+
+	LOAD_U32(r5,0x)		/* value for PB_MCMD */
+	stw	r5,PB_MCMD(r4)
+	sync
+#endif
+
+	/* Disable or enable PVT based on processor bus frequency
+	 * 1. Read CG_PWRUP_STATUS register field bits 18,17,16
+	 * 2. See if the value is < or > 133mhz (18:16 = 100)
+	 * 3. If > enable PVT
+	 */
+
+	LOAD_U32(r3,0xC0002234)
+	lwz	r3,0(r3)
+	rlwinm	r3,r3,16,29,31
+
+	cmpi	0,0,r3,0x0004
+	bgt	sdc_init
+
+#ifndef CONFIG_TSI108EMU
+	/* FIXME: Disable PB calibration control for any real Tsi108 board */
+	li	r5,0x0101	/* disable calibration control */
+	stw	r5,PB_PVT_CTRL2(r4)
+	sync
+#endif
+
+	/* Initialize SDRAM controller. */
+
+sdc_init:
+
+#ifndef SDC_HARDCODED_INIT
+	/* get SDC clock prior doing sdram controller autoconfig */
+	ori	r4,r29,TSI108_CLK_REG_OFFSET	/* r4 - ptr to CG registers */
+	lwz	r3, CG_PWRUP_STATUS(r4)		/* get CG configuration */
+	rlwinm	r3,r3,12,29,31			/* r3 - SD clk */
+	lis	r5,sdc_clk_sync@h
+	ori	r5,r5,sdc_clk_sync@l
+	/* Sri:  At this point check if r3 = 001. If yes,
+	 * the memory frequency should be same as the
+	 * MPX bus frequency
+	 */
+	cmpi	0,0,r3,0x0001
+	bne	get_nsec
+	lwz	r6, CG_PWRUP_STATUS(r4)
+	rlwinm	r6,r6,16,29,31
+	mr	r3,r6
+
+get_nsec:
+	rlwinm	r3,r3,2,0,31
+	lwzx	r9,r5,r3	/* get SD clk rate in nSec */
+	/* ATTN: r9 will be used by SPD routine */
+#endif /* !SDC_HARDCODED_INIT */
+
+	ori	r4,r29,TSI108_SD_REG_OFFSET /* r4 - ptr to SDRAM registers */
+
+	/* Initialize SDRAM controller. SDRAM Size = 512MB, One DIMM. */
+
+	LOAD_U32(r5,0x00)
+	stw	r5,SD_INT_ENABLE(r4) /* Ensure that interrupts are disabled */
+#ifdef ENABLE_SDRAM_ECC
+	li	r5, 0x01
+#endif /* ENABLE_SDRAM_ECC */
+	stw	r5,SD_ECC_CTRL(r4)	/* Enable/Disable ECC */
+	sync
+
+#ifdef SDC_HARDCODED_INIT /* config sdram controller with hardcoded values */
+
+	/* First read the CG_PWRUP_STATUS register to get the
+	 * memory speed from bits 22,21,20
+	 */
+
+	LOAD_U32(r3,0xC0002234)
+	lwz	r3,0(r3)
+	rlwinm	r3,r3,12,29,31
+
+	/* Now first check for 166, then 200, or default */
+
+	cmpi	0,0,r3,0x0005
+	bne	check_for_200mhz
+
+	/* set values for 166 Mhz memory speed
+	 * Set refresh rate and timing parameters
+	 */
+	LOAD_U32(r5,0x00000515)
+	stw	r5,SD_REFRESH(r4)
+	LOAD_U32(r5,0x03073368)
+	stw	r5,SD_TIMING(r4)
+	sync
+
+	/* Initialize DIMM0 control and BAR registers */
+	LOAD_U32(r5,VAL_SD_D0_CTRL)	/* auto-precharge disabled */
+#ifdef SDC_AUTOPRECH_EN
+	oris	r5,r5,0x0001		/* set auto precharge EN bit */
+#endif
+	stw	r5,SD_D0_CTRL(r4)
+	LOAD_U32(r5,VAL_SD_D0_BAR)
+	stw	r5,SD_D0_BAR(r4)
+	sync
+
+	/* Initialize DIMM1 control and BAR registers
+	 * (same as dimm 0, next 512MB, disabled)
+	 */
+	LOAD_U32(r5,VAL_SD_D1_CTRL)	/* auto-precharge disabled */
+#ifdef SDC_AUTOPRECH_EN
+	oris	r5,r5,0x0001	/* set auto precharge EN bit */
+#endif
+	stw	r5,SD_D1_CTRL(r4)
+	LOAD_U32(r5,VAL_SD_D1_BAR)
+	stw	r5,SD_D1_BAR(r4)
+	sync
+
+	b	sdc_init_done
+
+check_for_200mhz:
+
+	cmpi	0,0,r3,0x0006
+	bne	set_default_values
+
+	/* set values for 200Mhz memory speed
+	 * Set refresh rate and timing parameters
+	 */
+	LOAD_U32(r5,0x0000061a)
+	stw	r5,SD_REFRESH(r4)
+	LOAD_U32(r5,0x03083348)
+	stw	r5,SD_TIMING(r4)
+	sync
+
+	/* Initialize DIMM0 control and BAR registers */
+	LOAD_U32(r5,VAL_SD_D0_CTRL)	/* auto-precharge disabled */
+#ifdef SDC_AUTOPRECH_EN
+	oris	r5,r5,0x0001		/* set auto precharge EN bit */
+#endif
+	stw	r5,SD_D0_CTRL(r4)
+	LOAD_U32(r5,VAL_SD_D0_BAR)
+	stw	r5,SD_D0_BAR(r4)
+	sync
+
+	/* Initialize DIMM1 control and BAR registers
+	 * (same as dimm 0, next 512MB, disabled)
+	 */
+	LOAD_U32(r5,VAL_SD_D1_CTRL)	/* auto-precharge disabled */
+#ifdef SDC_AUTOPRECH_EN
+	oris	r5,r5,0x0001		/* set auto precharge EN bit */
+#endif
+	stw	r5,SD_D1_CTRL(r4)
+	LOAD_U32(r5,VAL_SD_D1_BAR)
+	stw	r5,SD_D1_BAR(r4)
+	sync
+
+	b	sdc_init_done
+
+set_default_values:
+
+	/* Set refresh rate and timing parameters */
+	LOAD_U32(r5,VAL_SD_REFRESH)
+	stw	r5,SD_REFRESH(r4)
+	LOAD_U32(r5,VAL_SD_TIMING)
+	stw	r5,SD_TIMING(r4)
+	sync
+
+	/* Initialize DIMM0 control and BAR registers */
+	LOAD_U32(r5,VAL_SD_D0_CTRL)	/* auto-precharge disabled */
+#ifdef SDC_AUTOPRECH_EN
+	oris	r5,r5,0x0001		/* set auto precharge EN bit */
+#endif
+	stw 	r5,SD_D0_CTRL(r4)
+	LOAD_U32(r5,VAL_SD_D0_BAR)
+	stw	r5,SD_D0_BAR(r4)
+	sync
+
+	/* Initialize DIMM1 control and BAR registers
+	 * (same as dimm 0, next 512MB, disabled)
+	 */
+	LOAD_U32(r5,VAL_SD_D1_CTRL)	/* auto-precharge disabled */
+#ifdef SDC_AUTOPRECH_EN
+	oris	r5,r5,0x0001		/* set auto precharge EN bit */
+#endif
+	stw	r5,SD_D1_CTRL(r4)
+	LOAD_U32(r5,VAL_SD_D1_BAR)
+	stw	r5,SD_D1_BAR(r4)
+	sync
+#else /* !SDC_HARDCODED_INIT */
+	bl	tsi108_sdram_spd	/* automatically detect SDC settings */
+#endif /* SDC_HARDCODED_INIT */
+
+sdc_init_done:
+
+#ifdef DISABLE_PBM
+	LOAD_U32(r5,0x00000030)		/* PB_EN + OCN_EN */
+#else
+	LOAD_U32(r5,0x00000230)		/* PB_EN + OCN_EN + PB/OCN=80/20 */
+#endif /* DISABLE_PBM */
+
+#ifdef CONFIG_TSI108EMU
+	oris	r5,r5,0x0010		/* set EMULATION_MODE bit */
+#endif
+
+	stw	r5,SD_CTRL(r4)
+	eieio
+	sync
+
+	/* Enable SDRAM access */
+
+	oris	r5,r5,0x8000		/* start SDC: set SD_CTRL[ENABLE] bit */
+	stw	r5,SD_CTRL(r4)
+	sync
+
+wait_init_complete:
+	lwz	r5,SD_STATUS(r4)
+	andi.	r5,r5,0x0001
+	/* wait until SDRAM initialization is complete */
+	beq	wait_init_complete
+
+	/* Map SDRAM into the processor bus address space */
+
+	ori	r4,r29,TSI108_PB_REG_OFFSET
+
+	/* Setup BARs associated with direct path PB<->SDRAM */
+
+	/* PB_SDRAM_BAR1:
+	 * provides a direct path to the main system memory (cacheable SDRAM)
+	 */
+
+	/* BA=0,Size=512MB, ENable, No Addr.Translation */
+	LOAD_U32(r5, 0x00000011)
+	stw	r5,PB_SDRAM_BAR1(r4)
+	sync
+
+	/* Make sure that PB_SDRAM_BAR1 decoder is set
+	 * (to allow following immediate read from SDRAM)
+	 */
+	lwz	r5,PB_SDRAM_BAR1(r4)
+	sync
+
+	/* PB_SDRAM_BAR2:
+	 * provides non-cacheable alias (via the direct path) to main
+	 * system memory.
+	 * Size = 512MB, ENable, Addr.Translation - ON,
+	 * BA = 0x0_40000000, TA = 0x0_00000000
+	 */
+
+	LOAD_U32(r5, 0x40010011)
+	stw	r5,PB_SDRAM_BAR2(r4)
+	sync
+
+	/* Make sure that PB_SDRAM_BAR2 decoder is set
+	 * (to allow following immediate read from SDRAM)
+	 */
+	lwz	r5,PB_SDRAM_BAR2(r4)
+	sync
+
+init_done:
+
+	/* All done. Restore LR and return. */
+	mtlr	r19
+	blr
+
+#if (0)
+	/*
+	 * init_cpu1
+	 * This routine enables CPU1 on the dual-processor system.
+	 * Now there is only one processor in the system
+	 */
+
+	.global enable_cpu1
+enable_cpu1:
+
+	lis	r3,Tsi108_Base@ha	/* Get Grendel CSR Base Addr */
+	addi	r3,r3,Tsi108_Base@l
+	lwz	r3,0(r3)		/* R3 = CSR Base Addr */
+	ori	r4,r3,TSI108_PB_REG_OFFSET
+	lwz	r3,PB_ARB_CTRL(r4)	/* Read PB Arbiter Control Register */
+	ori	r3,r3,0x0200		/* Set M1_EN bit */
+	stw	r3,PB_ARB_CTRL(r4)
+
+	blr
+#endif
+
+	/*
+	 * enable_EI
+	 * Enable CPU core external interrupt
+	 */
+
+	.global	enable_EI
+enable_EI:
+	mfmsr	r3
+	ori	r3,r3,0x8000	/* set EE bit */
+	mtmsr	r3
+	blr
+
+	/*
+	 * disable_EI
+	 * Disable CPU core external interrupt
+	 */
+
+	.global disable_EI
+disable_EI:
+	mfmsr	r3
+	li	r4,-32768	/* aka "li  r4,0x8000" */
+	andc	r3,r3,r4	/* clear EE bit */
+	mtmsr	r3
+	blr
+
+#ifdef ENABLE_SDRAM_ECC
+	/* enables SDRAM ECC  */
+
+	.global	enable_ECC
+enable_ECC:
+	ori	r4,r29,TSI108_SD_REG_OFFSET
+	lwz	r3,SD_ECC_CTRL(r4)	/* Read SDRAM ECC Control Register */
+	ori	r3,r3,0x0001		/* Set ECC_EN bit */
+	stw	r3,SD_ECC_CTRL(r4)
+	blr
+
+	/*
+	 * clear_ECC_err
+	 * Clears all pending SDRAM ECC errors
+	 * (normally after SDRAM scrubbing/initialization)
+	 */
+
+	.global	clear_ECC_err
+clear_ECC_err:
+	ori r4,r29,TSI108_SD_REG_OFFSET
+	ori r3,r0,0x0030	/* ECC_UE_INT + ECC_CE_INT bits */
+	stw r3,SD_INT_STATUS(r4)
+	blr
+
+#endif /* ENABLE_SDRAM_ECC */
+
+#ifndef SDC_HARDCODED_INIT
+
+	/* SDRAM SPD Support */
+#define	SD_I2C_CTRL1	(0x400)
+#define	SD_I2C_CTRL2	(0x404)
+#define SD_I2C_RD_DATA	(0x408)
+#define SD_I2C_WR_DATA	(0x40C)
+
+	/*
+	 * SDRAM SPD Support Macros
+	 */
+
+#define SPD_DIMM0	(0x00000100)
+#define SPD_DIMM1	(0x00000200)	/* SPD_DIMM1 was 0x00000000 */
+
+#define SPD_RDIMM			(0x01)
+#define SPD_UDIMM			(0x02)
+
+#define SPD_CAS_3			0x8
+#define SPD_CAS_4			0x10
+#define SPD_CAS_5			0x20
+
+#define ERR_NO_DIMM_FOUND		(0xdb0)
+#define ERR_TRAS_FAIL			(0xdb1)
+#define ERR_TRCD_FAIL			(0xdb2)
+#define ERR_TRP_FAIL			(0xdb3)
+#define ERR_TWR_FAIL			(0xdb4)
+#define ERR_UNKNOWN_PART		(0xdb5)
+#define ERR_NRANK_INVALID		(0xdb6)
+#define ERR_DIMM_SIZE			(0xdb7)
+#define ERR_ADDR_MODE			(0xdb8)
+#define ERR_RFRSH_RATE			(0xdb9)
+#define ERR_DIMM_TYPE			(0xdba)
+#define ERR_CL_VALUE			(0xdbb)
+#define ERR_TRFC_FAIL			(0xdbc)
+
+/* READ_SPD requirements:
+ * byte - byte address in SPD device (0 - 255)
+ * r3 = will return data read from I2C Byte location
+ * r4 - unchanged (SDC base addr)
+ * r5 - clobbered in routine (I2C status)
+ * r10 - number of DDR slot where first SPD device is detected
+ */
+
+#define READ_SPD(byte_num)		\
+	addis	r3, 0, byte_num@l;	\
+	or	r3, r3, r10;		\
+	ori	r3, r3, 0x0A;		\
+	stw	r3, SD_I2C_CTRL1(r4);	\
+	li	r3, I2C_CNTRL2_START;	\
+	stw	r3, SD_I2C_CTRL2(r4);	\
+	eieio;				\
+	sync;				\
+	li	r3, 0x100;		\
+1:;					\
+	addic.	r3, r3, -1;		\
+	bne	1b;			\
+2:;					\
+	lwz	r5, SD_I2C_CTRL2(r4);	\
+	rlwinm.	r3,r5,0,23,23;		\
+	bne	2b;			\
+	rlwinm.	r3,r5,0,3,3;		\
+	lwz	r3,SD_I2C_RD_DATA(r4)
+
+#define SPD_MIN_RFRSH	(0x80)
+#define SPD_MAX_RFRSH	(0x85)
+
+refresh_rates:	/* in nSec */
+	.long	15625	/* Normal (0x80) */
+	.long	3900	/* Reduced 0.25x (0x81) */
+	.long	7800	/* Reduced 0.5x (0x82) */
+	.long	31300	/* Extended 2x (0x83) */
+	.long	62500	/* Extended 4x (0x84) */
+	.long	125000	/* Extended 8x (0x85) */
+
+/*
+ * tsi108_sdram_spd
+ *
+ * Inittializes SDRAM Controller using DDR2 DIMM Serial Presence Detect data
+ * Uses registers: r4 - SDC base address (not changed)
+ *				   r9 - SDC clocking period in nSec
+ * Changes registers: r3,r5,r6,r7,r8,r10,r11
+ */
+
+tsi108_sdram_spd:
+
+	li	r10,SPD_DIMM0
+	xor	r11,r11,r11		/* DIMM Base Address: starts from 0 */
+
+do_first_dimm:
+
+	/* Program Refresh Rate	Register */
+
+	READ_SPD(12)			/* get Refresh Rate */
+	beq	check_next_slot
+	li	r5, ERR_RFRSH_RATE
+	cmpi	0,0,r3,SPD_MIN_RFRSH
+	ble	spd_fail
+	cmpi	0,0,r3,SPD_MAX_RFRSH
+	bgt	spd_fail
+	addi	r3,r3,-SPD_MIN_RFRSH
+	rlwinm	r3,r3,2,0,31
+	lis	r5,refresh_rates@h
+	ori	r5,r5,refresh_rates@l
+	lwzx	r5,r5,r3		/* get refresh rate in nSec */
+	divwu	r5,r5,r9		/* calculate # of SDC clocks */
+	stw	r5,SD_REFRESH(r4)	/* Set refresh rate */
+	sync
+
+	/* Program SD Timing Register */
+
+	li	r7, 0		/* clear r7 prior parameter collection */
+
+	READ_SPD(20)		/* get DIMM type: Registered or Unbuffered */
+	beq	spd_read_fail
+	li	r5, ERR_DIMM_TYPE
+	cmpi	0,0,r3,SPD_UDIMM
+	beq	do_cl
+	cmpi	0,0,r3,SPD_RDIMM
+	bne	spd_fail
+	oris	r7,r7,0x1000	/* set SD_TIMING[DIMM_TYPE] bit */
+
+do_cl:
+	READ_SPD(18)		/* Get CAS Latency */
+	beq	spd_read_fail
+	li	r5,ERR_CL_VALUE
+	andi.	r6,r3,SPD_CAS_3
+	beq	cl_4
+	li	r6,3
+	b	set_cl
+cl_4:
+	andi.	r6,r3,SPD_CAS_4
+	beq	cl_5
+	li	r6,4
+	b	set_cl
+cl_5:
+	andi.	r6,r3,SPD_CAS_5
+	beq	spd_fail
+	li	r6,5
+set_cl:
+	rlwimi	r7,r6,24,5,7
+
+	READ_SPD(30)		/* Get tRAS */
+	beq	spd_read_fail
+	divwu	r6,r3,r9
+	mullw	r8,r6,r9
+	subf.	r8,r8,r3
+	beq	set_tras
+	addi	r6,r6,1
+set_tras:
+	li r5,ERR_TRAS_FAIL
+	cmpi	0,0,r6,0x0F	/* max supported value */
+	bgt	spd_fail
+	rlwimi	r7,r6,16,12,15
+
+	READ_SPD(29)	/* Get tRCD */
+	beq	spd_read_fail
+	/* right shift tRCD by 2 bits as per DDR2 spec */
+	rlwinm	r3,r3,30,2,31
+	divwu	r6,r3,r9
+	mullw	r8,r6,r9
+	subf.	r8,r8,r3
+	beq	set_trcd
+	addi	r6,r6,1
+set_trcd:
+	li	r5,ERR_TRCD_FAIL
+	cmpi	0,0,r6,0x07	/* max supported value */
+	bgt	spd_fail
+	rlwimi	r7,r6,12,17,19
+
+	READ_SPD(27)	/* Get tRP value */
+	beq	spd_read_fail
+	rlwinm	r3,r3,30,2,31	/* right shift tRP by 2 bits as per DDR2 spec */
+	divwu	r6,r3,r9
+	mullw	r8,r6,r9
+	subf.	r8,r8,r3
+	beq	set_trp
+	addi	r6,r6,1
+set_trp:
+	li	r5,ERR_TRP_FAIL
+	cmpi	0,0,r6,0x07	/* max supported value */
+	bgt	spd_fail
+	rlwimi	r7,r6,8,21,23
+
+	READ_SPD(36)	/* Get tWR value */
+	beq	spd_read_fail
+	rlwinm	r3,r3,30,2,31	/* right shift tWR by 2 bits as per DDR2 spec */
+	divwu	r6,r3,r9
+	mullw	r8,r6,r9
+	subf.	r8,r8,r3
+	beq	set_twr
+	addi	r6,r6,1
+set_twr:
+	addi	r6,r6,-1	/* Tsi108 SDC always gives one extra clock */
+	li	r5,ERR_TWR_FAIL
+	cmpi	0,0,r6,0x07	/* max supported value */
+	bgt	spd_fail
+	rlwimi	r7,r6,5,24,26
+
+	READ_SPD(42)	/* Get tRFC */
+	beq	spd_read_fail
+	li	r5, ERR_TRFC_FAIL
+	/* Tsi108 spec: tRFC=(tRFC + 1)/2 */
+	addi	r3,r3,1
+	rlwinm.	r3,r3,31,1,31	/* divide by 2 */
+	beq	spd_fail
+	divwu	r6,r3,r9
+	mullw	r8,r6,r9
+	subf.	r8,r8,r3
+	beq	set_trfc
+	addi	r6,r6,1
+set_trfc:
+	cmpi	0,0,r6,0x1F	/* max supported value */
+	bgt	spd_fail
+	rlwimi	r7,r6,0,27,31
+
+	stw	r7,SD_TIMING(r4)
+	sync
+
+	/*
+	 * The following two registers are set on per-DIMM basis.
+	 * The SD_REFRESH and SD_TIMING settings are common for both DIMMS
+	 */
+
+do_each_dimm:
+
+	/* Program SDRAM DIMM Control Register */
+
+	li	r7, 0		/* clear r7 prior parameter collection */
+
+	READ_SPD(13)		/* Get Primary SDRAM Width */
+	beq	spd_read_fail
+	cmpi	0,0,r3,4	/* Check for 4-bit SDRAM */
+	beq	do_nbank
+	oris	r7,r7,0x0010	/* Set MEM_WIDTH bit */
+
+do_nbank:
+	READ_SPD(17)		/* Get Number of banks on SDRAM device */
+	beq	spd_read_fail
+	/* Grendel only distinguish betw. 4 or 8-bank memory parts */
+	li	r5,ERR_UNKNOWN_PART	/* non-supported memory part */
+	cmpi	0,0,r3,4
+	beq	do_nrank
+	cmpi	0,0,r3,8
+	bne	spd_fail
+	ori	r7,r7,0x1000
+
+do_nrank:
+	READ_SPD(5)		/* Get # of Ranks */
+	beq	spd_read_fail
+	li	r5,ERR_NRANK_INVALID
+	andi.	r6,r3,0x7	/* Use bits [2..0] only */
+	beq	do_addr_mode
+	cmpi	0,0,r6,1
+	bgt	spd_fail
+	rlwimi	r7,r6,8,23,23
+
+do_addr_mode:
+	READ_SPD(4)		/* Get # of Column Addresses */
+	beq	spd_read_fail
+	li	r5, ERR_ADDR_MODE
+	andi.	r3,r3,0x0f	/* cut off reserved bits */
+	cmpi	0,0,r3,8
+	ble	spd_fail
+	cmpi	0,0,r3,15
+	bgt	spd_fail
+	addi	r6,r3,-8	/* calculate ADDR_MODE parameter */
+	rlwimi	r7,r6,4,24,27	/* set ADDR_MODE field */
+
+set_dimm_ctrl:
+#ifdef SDC_AUTOPRECH_EN
+	oris	r7,r7,0x0001	/* set auto precharge EN bit */
+#endif
+	ori	r7,r7,1		/* set ENABLE bit */
+	cmpi	0,0,r10,SPD_DIMM0
+	bne	1f
+	stw	r7,SD_D0_CTRL(r4)
+	sync
+	b	set_dimm_bar
+1:
+	stw	r7,SD_D1_CTRL(r4)
+	sync
+
+
+	/* Program SDRAM DIMMx Base Address Register */
+
+set_dimm_bar:
+	READ_SPD(5)		/* get # of Ranks */
+	beq	spd_read_fail
+	andi.	r7,r3,0x7
+	addi	r7,r7,1
+	READ_SPD(31)		/* Read DIMM rank density */
+	beq	spd_read_fail
+	rlwinm	r5,r3,27,29,31
+	rlwinm	r6,r3,3,24,28
+	or	r5,r6,r5	/* r5 = Normalized Rank Density byte */
+	lis	r8, 0x0080	/* 128MB >> 4 */
+	mullw	r8,r8,r5	/* r8 = (rank_size >> 4) */
+	mullw	r8,r8,r7	/* r8 = (DIMM_size >> 4) */
+	neg	r7,r8
+	rlwinm	r7,r7,28,4,31
+	or	r7,r7,r11	/* set ADDR field */
+	rlwinm	r8,r8,12,20,31
+	add	r11,r11,r8	/* set Base Addr for next DIMM */
+
+	cmpi	0,0,r10,SPD_DIMM0
+	bne	set_dimm1_size
+	stw	r7,SD_D0_BAR(r4)
+	sync
+	li	r10,SPD_DIMM1
+	READ_SPD(0)
+	bne do_each_dimm
+	b spd_done
+
+set_dimm1_size:
+	stw	r7,SD_D1_BAR(r4)
+	sync
+spd_done:
+	blr
+
+check_next_slot:
+	cmpi	0,0,r10,SPD_DIMM1
+	beq	spd_read_fail
+	li	r10,SPD_DIMM1
+	b	do_first_dimm
+spd_read_fail:
+	ori	r3,r0,0xdead
+	b	err_hung
+spd_fail:
+	li	r3,0x0bad
+	sync
+err_hung:	/* hang here for debugging */
+	nop
+	nop
+	b	err_hung
+
+#endif /* !SDC_HARDCODED_INIT */
diff --git a/board/mpc7448hpc2/config.mk b/board/mpc7448hpc2/config.mk
new file mode 100644
index 0000000..2e58858
--- /dev/null
+++ b/board/mpc7448hpc2/config.mk
@@ -0,0 +1,28 @@
+#
+# Copyright (c) 2005 Freescale Semiconductor, Inc.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+# Flash address
+TEXT_BASE = 0xFF000000
+# RAM address
+#TEXT_BASE = 0x00400000
+
+PLATFORM_CPPFLAGS += -DTEXT_BASE=$(TEXT_BASE) -maltivec -mabi=altivec -msoft-float
diff --git a/board/mpc7448hpc2/mpc7448hpc2.c b/board/mpc7448hpc2/mpc7448hpc2.c
new file mode 100644
index 0000000..63c99de
--- /dev/null
+++ b/board/mpc7448hpc2/mpc7448hpc2.c
@@ -0,0 +1,107 @@
+/*
+ * (C) Copyright 2005 Freescale Semiconductor, Inc.
+ *
+ * Roy Zang <tie-fei.zang@freescale.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ * modifications for the Tsi108 Emul Board by avb@Tundra
+ */
+
+/*
+ * board support/init functions for the
+ * Freescale MPC7448 HPC2 (High-Performance Computing 2 Platform).
+ */
+
+#include <common.h>
+#include <74xx_7xx.h>
+#if defined(CONFIG_OF_FLAT_TREE)
+#include <ft_build.h>
+extern void ft_cpu_setup (void *blob, bd_t *bd);
+#endif
+
+#undef	DEBUG
+
+extern void flush_data_cache (void);
+extern void invalidate_l1_instruction_cache (void);
+extern void tsi108_init_f (void);
+
+int display_mem_map (void);
+
+void after_reloc (ulong dest_addr)
+{
+	DECLARE_GLOBAL_DATA_PTR;
+
+	/*
+	 * Jump to the main U-Boot board init code
+	 */
+	board_init_r ((gd_t *) gd, dest_addr);
+	/* NOTREACHED */
+}
+
+/*
+ * Check Board Identity:
+ * report board type
+ */
+
+int checkboard (void)
+{
+	int l_type = 0;
+
+	printf ("BOARD: %s\n", CFG_BOARD_NAME);
+	return (l_type);
+}
+
+/*
+ * Read Processor ID:
+ *
+ * report calling processor number
+ */
+
+int read_pid (void)
+{
+	return 0;		/* we are on single CPU platform for a while */
+}
+
+long int dram_size (int board_type)
+{
+	return 0x20000000;	/* 256M bytes */
+}
+
+long int initdram (int board_type)
+{
+	return dram_size (board_type);
+}
+
+#if defined(CONFIG_OF_FLAT_TREE) && defined(CONFIG_OF_BOARD_SETUP)
+void
+ft_board_setup (void *blob, bd_t *bd)
+{
+	u32 *p;
+	int len;
+
+	ft_cpu_setup (blob, bd);
+
+	p = ft_get_prop (blob, "/memory/reg", &len);
+	if (p != NULL) {
+		*p++ = cpu_to_be32 (bd->bi_memstart);
+		*p = cpu_to_be32 (bd->bi_memsize);
+	}
+}
+#endif
diff --git a/board/mpc7448hpc2/tsi108_init.c b/board/mpc7448hpc2/tsi108_init.c
new file mode 100644
index 0000000..8a7efef
--- /dev/null
+++ b/board/mpc7448hpc2/tsi108_init.c
@@ -0,0 +1,665 @@
+/*****************************************************************************
+ * (C) Copyright 2003;  Tundra Semiconductor Corp.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *****************************************************************************/
+
+/*----------------------------------------------------------------------------
+ * FILENAME: tsi108_init.c
+ *
+ * Originator: Alex Bounine
+ *
+ * DESCRIPTION:
+ * Initialization code for the Tundra Tsi108 bridge chip
+ *---------------------------------------------------------------------------*/
+
+#include <common.h>
+#include <74xx_7xx.h>
+#include <config.h>
+#include <version.h>
+#include <asm/processor.h>
+#include <tsi108.h>
+
+extern void mpicInit (int verbose);
+
+/*
+ * Configuration Options
+ */
+
+typedef struct {
+	ulong upper;
+	ulong lower;
+} PB2OCN_LUT_ENTRY;
+
+PB2OCN_LUT_ENTRY pb2ocn_lut1[32] = {
+	/* 0 - 7 */
+	{0x00000000, 0x00000201}, /* PBA=0xE000_0000 -> PCI/X (Byte-Swap) */
+	{0x00000000, 0x00000201}, /* PBA=0xE100_0000 -> PCI/X (Byte-Swap) */
+	{0x00000000, 0x00000201}, /* PBA=0xE200_0000 -> PCI/X (Byte-Swap) */
+	{0x00000000, 0x00000201}, /* PBA=0xE300_0000 -> PCI/X (Byte-Swap) */
+	{0x00000000, 0x00000201}, /* PBA=0xE400_0000 -> PCI/X (Byte-Swap) */
+	{0x00000000, 0x00000201}, /* PBA=0xE500_0000 -> PCI/X (Byte-Swap) */
+	{0x00000000, 0x00000201}, /* PBA=0xE600_0000 -> PCI/X (Byte-Swap) */
+	{0x00000000, 0x00000201}, /* PBA=0xE700_0000 -> PCI/X (Byte-Swap) */
+
+	/* 8 - 15 */
+	{0x00000000, 0x00000201}, /* PBA=0xE800_0000 -> PCI/X (Byte-Swap) */
+	{0x00000000, 0x00000201}, /* PBA=0xE900_0000 -> PCI/X (Byte-Swap) */
+	{0x00000000, 0x00000201}, /* PBA=0xEA00_0000 -> PCI/X (Byte-Swap) */
+	{0x00000000, 0x00000201}, /* PBA=0xEB00_0000 -> PCI/X (Byte-Swap) */
+	{0x00000000, 0x00000201}, /* PBA=0xEC00_0000 -> PCI/X (Byte-Swap) */
+	{0x00000000, 0x00000201}, /* PBA=0xED00_0000 -> PCI/X (Byte-Swap) */
+	{0x00000000, 0x00000201}, /* PBA=0xEE00_0000 -> PCI/X (Byte-Swap) */
+	{0x00000000, 0x00000201}, /* PBA=0xEF00_0000 -> PCI/X (Byte-Swap) */
+
+	/* 16 - 23 */
+	{0x00000000, 0x00000201}, /* PBA=0xF000_0000 -> PCI/X (Byte-Swap) */
+	{0x00000000, 0x00000201}, /* PBA=0xF100_0000 -> PCI/X (Byte-Swap) */
+	{0x00000000, 0x00000201}, /* PBA=0xF200_0000 -> PCI/X (Byte-Swap) */
+	{0x00000000, 0x00000201}, /* PBA=0xF300_0000 -> PCI/X (Byte-Swap) */
+	{0x00000000, 0x00000201}, /* PBA=0xF400_0000 -> PCI/X (Byte-Swap) */
+	{0x00000000, 0x00000201}, /* PBA=0xF500_0000 -> PCI/X (Byte-Swap) */
+	{0x00000000, 0x00000201}, /* PBA=0xF600_0000 -> PCI/X (Byte-Swap) */
+	{0x00000000, 0x00000201}, /* PBA=0xF700_0000 -> PCI/X (Byte-Swap) */
+	/* 24 - 31 */
+	{0x00000000, 0x00000201}, /* PBA=0xF800_0000 -> PCI/X (Byte-Swap) */
+	{0x00000000, 0x00000201}, /* PBA=0xF900_0000 -> PCI/X (Byte-Swap) */
+	{0x00000000, 0x00000201}, /* PBA=0xFA00_0000 -> PCI/X  PCI I/O (Byte-Swap) */
+	{0x00000000, 0x00000201}, /* PBA=0xFB00_0000 -> PCI/X  PCI Config (Byte-Swap) */
+
+	{0x00000000, 0x02000240}, /* PBA=0xFC00_0000 -> HLP */
+	{0x00000000, 0x01000240}, /* PBA=0xFD00_0000 -> HLP */
+	{0x00000000, 0x03000240}, /* PBA=0xFE00_0000 -> HLP */
+	{0x00000000, 0x00000240}  /* PBA=0xFF00_0000 -> HLP : (Translation Enabled + Byte-Swap)*/
+};
+
+#ifdef CFG_CLK_SPREAD
+typedef struct {
+	ulong ctrl0;
+	ulong ctrl1;
+} PLL_CTRL_SET;
+
+/*
+ * Clock Generator SPLL0 initialization values
+ * PLL0 configuration table for various PB_CLKO freq.
+ * Uses pre-calculated values for Fs = 30 kHz, D = 0.5%
+ * Fout depends on required PB_CLKO. Based on Fref = 33 MHz
+ */
+
+static PLL_CTRL_SET pll0_config[8] = {
+	{0x00000000, 0x00000000},	/* 0: bypass */
+	{0x00000000, 0x00000000},	/* 1: reserved */
+	{0x00430044, 0x00000043},	/* 2: CG_PB_CLKO = 183 MHz */
+	{0x005c0044, 0x00000039},	/* 3: CG_PB_CLKO = 100 MHz */
+	{0x005c0044, 0x00000039},	/* 4: CG_PB_CLKO = 133 MHz */
+	{0x004a0044, 0x00000040},	/* 5: CG_PB_CLKO = 167 MHz */
+	{0x005c0044, 0x00000039},	/* 6: CG_PB_CLKO = 200 MHz */
+	{0x004f0044, 0x0000003e}	/* 7: CG_PB_CLKO = 233 MHz */
+};
+#endif	/* CFG_CLK_SPREAD */
+
+/*
+ * Prosessor Bus Clock (in MHz) defined by CG_PB_SELECT
+ * (based on recommended Tsi108 reference clock 33MHz)
+ */
+static int pb_clk_sel[8] = { 0, 0, 183, 100, 133, 167, 200, 233 };
+
+/*
+ * get_board_bus_clk ()
+ *
+ * returns the bus clock in Hz.
+ */
+unsigned long get_board_bus_clk (void)
+{
+	ulong i;
+
+	/* Detect PB clock freq. */
+	i = in32(CFG_TSI108_CSR_BASE + TSI108_CLK_REG_OFFSET + CG_PWRUP_STATUS);
+	i = (i >> 16) & 0x07;	/* Get PB PLL multiplier */
+
+	return pb_clk_sel[i] * 1000000;
+}
+
+/*
+ * board_early_init_f ()
+ *
+ * board-specific initialization executed from flash
+ */
+
+int board_early_init_f (void)
+{
+	DECLARE_GLOBAL_DATA_PTR;
+	ulong i;
+
+	gd->mem_clk = 0;
+	i = in32 (CFG_TSI108_CSR_BASE + TSI108_CLK_REG_OFFSET +
+			CG_PWRUP_STATUS);
+	i = (i >> 20) & 0x07;	/* Get GD PLL multiplier */
+	switch (i) {
+	case 0:	/* external clock */
+		printf ("Using external clock\n");
+		break;
+	case 1:	/* system clock */
+		gd->mem_clk = gd->bus_clk;
+		break;
+	case 4:	/* 133 MHz */
+	case 5:	/* 166 MHz */
+	case 6:	/* 200 MHz */
+		gd->mem_clk = pb_clk_sel[i] * 1000000;
+		break;
+	default:
+		printf ("Invalid DDR2 clock setting\n");
+		return -1;
+	}
+	printf ("BUS: %d MHz\n", get_board_bus_clk() / 1000000);
+	printf ("MEM: %d MHz\n", gd->mem_clk / 1000000);
+	return 0;
+}
+
+/*
+ * board_early_init_r() - Tsi108 initialization function executed right after
+ * relocation. Contains code that cannot be executed from flash.
+ */
+
+int board_early_init_r (void)
+{
+	ulong temp, i;
+	ulong reg_val;
+	volatile ulong *reg_ptr;
+
+	reg_ptr =
+		(ulong *) (CFG_TSI108_CSR_BASE + TSI108_PB_REG_OFFSET + 0x900);
+
+	for (i = 0; i < 32; i++) {
+		*reg_ptr++ = 0x00000201;	/* SWAP ENABLED */
+		*reg_ptr++ = 0x00;
+	}
+
+	__asm__ __volatile__ ("eieio");
+	__asm__ __volatile__ ("sync");
+
+	/* Setup PB_OCN_BAR2: size 256B + ENable @ 0x0_80000000 */
+
+	out32 (CFG_TSI108_CSR_BASE + TSI108_PB_REG_OFFSET + PB_OCN_BAR2,
+		0x80000001);
+	__asm__ __volatile__ ("sync");
+
+	/* Make sure that OCN_BAR2 decoder is set (to allow following immediate
+	 * read from SDRAM)
+	 */
+
+	temp = in32(CFG_TSI108_CSR_BASE + TSI108_PB_REG_OFFSET + PB_OCN_BAR2);
+	__asm__ __volatile__ ("sync");
+
+	/*
+	 * Remap PB_OCN_BAR1 to accomodate PCI-bus aperture and EPROM into the
+	 * processor bus address space. Immediately after reset LUT and address
+	 * translation are disabled for this BAR. Now we have to initialize LUT
+	 * and switch from the BOOT mode to the normal operation mode.
+	 *
+	 * The aperture defined by PB_OCN_BAR1 startes at address 0xE0000000
+	 * and covers 512MB of address space. To allow larger aperture we also
+	 * have to relocate register window of Tsi108
+	 *
+	 * Initialize LUT (32-entries) prior switching PB_OCN_BAR1 from BOOT
+	 * mode.
+	 *
+	 * initialize pointer to LUT associated with PB_OCN_BAR1
+	 */
+	reg_ptr =
+		(ulong *) (CFG_TSI108_CSR_BASE + TSI108_PB_REG_OFFSET + 0x800);
+
+	for (i = 0; i < 32; i++) {
+		*reg_ptr++ = pb2ocn_lut1[i].lower;
+		*reg_ptr++ = pb2ocn_lut1[i].upper;
+	}
+
+	__asm__ __volatile__ ("sync");
+
+	/* Base addresses for CS0, CS1, CS2, CS3 */
+
+	out32 (CFG_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B0_ADDR,
+		0x00000000);
+	__asm__ __volatile__ ("sync");
+
+	out32 (CFG_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B1_ADDR,
+		0x00100000);
+	__asm__ __volatile__ ("sync");
+
+	out32 (CFG_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B2_ADDR,
+		0x00200000);
+	__asm__ __volatile__ ("sync");
+
+	out32 (CFG_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B3_ADDR,
+		0x00300000);
+	__asm__ __volatile__ ("sync");
+
+	/* Masks for HLP banks */
+
+	out32 (CFG_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B0_MASK,
+		0xFFF00000);
+	__asm__ __volatile__ ("sync");
+
+	out32 (CFG_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B1_MASK,
+		0xFFF00000);
+	__asm__ __volatile__ ("sync");
+
+	out32 (CFG_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B2_MASK,
+		0xFFF00000);
+	__asm__ __volatile__ ("sync");
+
+	out32 (CFG_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B3_MASK,
+		0xFFF00000);
+	__asm__ __volatile__ ("sync");
+
+	/* Set CTRL0 values for banks */
+
+	out32 (CFG_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B0_CTRL0,
+		0x7FFC44C2);
+	__asm__ __volatile__ ("sync");
+
+	out32 (CFG_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B1_CTRL0,
+		0x7FFC44C0);
+	__asm__ __volatile__ ("sync");
+
+	out32 (CFG_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B2_CTRL0,
+		0x7FFC44C0);
+	__asm__ __volatile__ ("sync");
+
+	out32 (CFG_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B3_CTRL0,
+		0x7FFC44C2);
+	__asm__ __volatile__ ("sync");
+
+	/* Set banks to latched mode, enabled, and other default settings */
+
+	out32 (CFG_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B0_CTRL1,
+		0x7C0F2000);
+	__asm__ __volatile__ ("sync");
+
+	out32 (CFG_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B1_CTRL1,
+		0x7C0F2000);
+	__asm__ __volatile__ ("sync");
+
+	out32 (CFG_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B2_CTRL1,
+		0x7C0F2000);
+	__asm__ __volatile__ ("sync");
+
+	out32 (CFG_TSI108_CSR_BASE + TSI108_HLP_REG_OFFSET + HLP_B3_CTRL1,
+		0x7C0F2000);
+	__asm__ __volatile__ ("sync");
+
+	/*
+	 * Set new value for PB_OCN_BAR1: switch from BOOT to LUT mode.
+	 * value for PB_OCN_BAR1: (BA-0xE000_0000 + size 512MB + ENable)
+	 */
+	out32 (CFG_TSI108_CSR_BASE + TSI108_PB_REG_OFFSET + PB_OCN_BAR1,
+		0xE0000011);
+	__asm__ __volatile__ ("sync");
+
+	/* Make sure that OCN_BAR2 decoder is set (to allow following
+	 * immediate read from SDRAM)
+	 */
+
+	temp = in32(CFG_TSI108_CSR_BASE + TSI108_PB_REG_OFFSET + PB_OCN_BAR1);
+	__asm__ __volatile__ ("sync");
+
+	/*
+	 * SRI: At this point we have enabled the HLP banks. That means we can
+	 * now read from the NVRAM and initialize the environment variables.
+	 * We will over-ride the env_init called in board_init_f
+	 * This is really a work-around because, the HLP bank 1
+	 * where NVRAM resides is not visible during board_init_f
+	 * (lib_ppc/board.c)
+	 * Alternatively, we could use the I2C EEPROM at start-up to configure
+	 * and enable all HLP banks and not just HLP 0 as is being done for
+	 * Taiga Rev. 2.
+	 */
+
+	env_init ();
+
+#ifndef DISABLE_PBM
+
+	/*
+	 * For IBM processors we have to set Address-Only commands generated
+	 * by PBM that are different from ones set after reset.
+	 */
+
+	temp = get_cpu_type ();
+
+	if ((CPU_750FX == temp) || (CPU_750GX == temp))
+		out32 (CFG_TSI108_CSR_BASE + TSI108_PB_REG_OFFSET + PB_MCMD,
+			0x00009955);
+#endif	/* DISABLE_PBM */
+
+#ifdef CONFIG_PCI
+	/*
+	 * Initialize PCI/X block
+	 */
+
+	/* Map PCI/X Configuration Space (16MB @ 0x0_FE000000) */
+	out32 (CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET +
+		PCI_PFAB_BAR0_UPPER, 0);
+	__asm__ __volatile__ ("sync");
+
+	out32 (CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_PFAB_BAR0,
+		0xFB000001);
+	__asm__ __volatile__ ("sync");
+
+	/* Set Bus Number for the attached PCI/X bus (we will use 0 for NB) */
+
+	temp =	in32(CFG_TSI108_CSR_BASE +
+		TSI108_PCI_REG_OFFSET + PCI_PCIX_STAT);
+
+	temp &= ~0xFF00;	/* Clear the BUS_NUM field */
+
+	out32 (CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_PCIX_STAT,
+		temp);
+
+	/* Map PCI/X IO Space (64KB @ 0x0_FD000000) takes one 16MB LUT entry */
+
+	out32 (CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_PFAB_IO_UPPER,
+		0);
+	__asm__ __volatile__ ("sync");
+
+	/* This register is on the PCI side to interpret the address it receives
+	 * and maps it as a IO address.
+	 */
+
+	out32 (CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_PFAB_IO,
+		0xFA000001);
+	__asm__ __volatile__ ("sync");
+
+	/*
+	 * Map PCI/X Memory Space
+	 *
+	 * Transactions directed from OCM to PCI Memory Space are directed
+	 * from PB to PCI
+	 * unchanged (as defined by PB_OCN_BAR1,2 and LUT settings).
+	 * If address remapping is required the corresponding PCI_PFAB_MEM32
+	 * and PCI_PFAB_PFMx register groups have to be configured.
+	 *
+	 * Map the path from the PCI/X bus into the system memory
+	 *
+	 * The memory mapped window assotiated with PCI P2O_BAR2 provides
+	 * access to the system memory without address remapping.
+	 * All system memory is opened for accesses initiated by PCI/X bus
+	 * masters.
+	 *
+	 * Initialize LUT associated with PCI P2O_BAR2
+	 *
+	 * set pointer to LUT associated with PCI P2O_BAR2
+	 */
+
+	reg_ptr =
+		(ulong *) (CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + 0x500);
+
+#ifdef DISABLE_PBM
+
+	/* In case when PBM is disabled (no HW supported cache snoopng on PB)
+	 * P2O_BAR2 is directly mapped into the system memory without address
+	 * translation.
+	 */
+
+	reg_val = 0x00000004;	/* SDRAM port + NO Addr_Translation */
+
+	for (i = 0; i < 32; i++) {
+		*reg_ptr++ = reg_val;	/* P2O_BAR2_LUTx */
+		*reg_ptr++ = 0;		/* P2O_BAR2_LUT_UPPERx */
+	}
+
+	/* value for PCI BAR2 (size = 512MB, Enabled, No Addr. Translation) */
+	reg_val = 0x00007500;
+#else
+
+	reg_val = 0x00000002;	/* Destination port = PBM */
+
+	for (i = 0; i < 32; i++) {
+		*reg_ptr++ = reg_val;	/* P2O_BAR2_LUTx */
+/* P2O_BAR2_LUT_UPPERx : Set data swapping mode for PBM (byte swapping) */
+		*reg_ptr++ = 0x40000000;
+/* offset = 16MB, address translation is enabled to allow byte swapping */
+		reg_val += 0x01000000;
+	}
+
+/* value for PCI BAR2 (size = 512MB, Enabled, Address Translation Enabled) */
+	reg_val = 0x00007100;
+#endif
+
+	__asm__ __volatile__ ("eieio");
+	__asm__ __volatile__ ("sync");
+
+	out32 (CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_P2O_PAGE_SIZES,
+		reg_val);
+	__asm__ __volatile__ ("sync");
+
+	/* Set 64-bit PCI bus address for system memory
+	 * ( 0 is the best choice for easy mapping)
+	 */
+
+	out32 (CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_P2O_BAR2,
+		0x00000000);
+	out32 (CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_P2O_BAR2_UPPER,
+		0x00000000);
+	__asm__ __volatile__ ("sync");
+
+#ifndef DISABLE_PBM
+	/*
+	 *  The memory mapped window assotiated with PCI P2O_BAR3 provides
+	 *  access to the system memory using SDRAM OCN port and address
+	 *  translation. This is alternative way to access SDRAM from PCI
+	 *  required for Tsi108 emulation testing.
+	 *  All system memory is opened for accesses initiated by
+	 *  PCI/X bus masters.
+	 *
+	 *  Initialize LUT associated with PCI P2O_BAR3
+	 *
+	 *  set pointer to LUT associated with PCI P2O_BAR3
+	 */
+	reg_ptr =
+		(ulong *) (CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + 0x600);
+
+	reg_val = 0x00000004;	/* Destination port = SDC */
+
+	for (i = 0; i < 32; i++) {
+		*reg_ptr++ = reg_val;	/* P2O_BAR3_LUTx */
+
+/* P2O_BAR3_LUT_UPPERx : Set data swapping mode for PBM (byte swapping) */
+		*reg_ptr++ = 0;
+
+/* offset = 16MB, address translation is enabled to allow byte swapping */
+		reg_val += 0x01000000;
+	}
+
+	__asm__ __volatile__ ("eieio");
+	__asm__ __volatile__ ("sync");
+
+	/* Configure PCI P2O_BAR3 (size = 512MB, Enabled) */
+
+	reg_val =
+		in32(CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET +
+		 PCI_P2O_PAGE_SIZES);
+	reg_val &= ~0x00FF;
+	reg_val |= 0x0071;
+	out32 (CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_P2O_PAGE_SIZES,
+		reg_val);
+	__asm__ __volatile__ ("sync");
+
+	/* Set 64-bit base PCI bus address for window (0x20000000) */
+
+	out32 (CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_P2O_BAR3_UPPER,
+		0x00000000);
+	out32 (CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_P2O_BAR3,
+		0x20000000);
+	__asm__ __volatile__ ("sync");
+
+#endif	/* !DISABLE_PBM */
+
+#ifdef ENABLE_PCI_CSR_BAR
+	/* open if required access to Tsi108 CSRs from the PCI/X bus */
+	/* enable BAR0 on the PCI/X bus */
+	reg_val = in32(CFG_TSI108_CSR_BASE +
+		TSI108_PCI_REG_OFFSET + PCI_MISC_CSR);
+	reg_val |= 0x02;
+	out32 (CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_MISC_CSR,
+		reg_val);
+	__asm__ __volatile__ ("sync");
+
+	out32 (CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_P2O_BAR0_UPPER,
+		0x00000000);
+	out32 (CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_P2O_BAR0,
+		CFG_TSI108_CSR_BASE);
+	__asm__ __volatile__ ("sync");
+
+#endif
+
+	/*
+	 * Finally enable PCI/X Bus Master and Memory Space access
+	 */
+
+	reg_val = in32(CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_CSR);
+	reg_val |= 0x06;
+	out32 (CFG_TSI108_CSR_BASE + TSI108_PCI_REG_OFFSET + PCI_CSR, reg_val);
+	__asm__ __volatile__ ("sync");
+
+#endif	/* CONFIG_PCI */
+
+	/*
+	 * Initialize MPIC outputs (interrupt pins):
+	 * Interrupt routing on the Grendel Emul. Board:
+	 * PB_INT[0] -> INT (CPU0)
+	 * PB_INT[1] -> INT (CPU1)
+	 * PB_INT[2] -> MCP (CPU0)
+	 * PB_INT[3] -> MCP (CPU1)
+	 * Set interrupt controller outputs as Level_Sensitive/Active_Low
+	 */
+	out32 (CFG_TSI108_CSR_BASE + TSI108_MPIC_REG_OFFSET + MPIC_CSR(0), 0x02);
+	out32 (CFG_TSI108_CSR_BASE + TSI108_MPIC_REG_OFFSET + MPIC_CSR(1), 0x02);
+	out32 (CFG_TSI108_CSR_BASE + TSI108_MPIC_REG_OFFSET + MPIC_CSR(2), 0x02);
+	out32 (CFG_TSI108_CSR_BASE + TSI108_MPIC_REG_OFFSET + MPIC_CSR(3), 0x02);
+	__asm__ __volatile__ ("sync");
+
+	/*
+	 * Ensure that Machine Check exception is enabled
+	 * We need it to support PCI Bus probing (configuration reads)
+	 */
+
+	reg_val = mfmsr ();
+	mtmsr(reg_val | MSR_ME);
+
+	return 0;
+}
+
+/*
+ * Needed to print out L2 cache info
+ * used in the misc_init_r function
+ */
+
+unsigned long get_l2cr (void)
+{
+	unsigned long l2controlreg;
+	asm volatile ("mfspr %0, 1017":"=r" (l2controlreg):);
+	return l2controlreg;
+}
+
+/*
+ * misc_init_r()
+ *
+ * various things to do after relocation
+ *
+ */
+
+int misc_init_r (void)
+{
+	DECLARE_GLOBAL_DATA_PTR;
+#ifdef CFG_CLK_SPREAD	/* Initialize Spread-Spectrum Clock generation */
+	ulong i;
+
+	/* Ensure that Spread-Spectrum is disabled */
+	out32 (CFG_TSI108_CSR_BASE + TSI108_CLK_REG_OFFSET + CG_PLL0_CTRL0, 0);
+	out32 (CFG_TSI108_CSR_BASE + TSI108_CLK_REG_OFFSET + CG_PLL1_CTRL0, 0);
+
+	/* Initialize PLL1: CG_PCI_CLK , internal OCN_CLK
+	 * Uses pre-calculated value for Fout = 800 MHz, Fs = 30 kHz, D = 0.5%
+	 */
+
+	out32 (CFG_TSI108_CSR_BASE + TSI108_CLK_REG_OFFSET + CG_PLL1_CTRL0,
+		0x002e0044);	/* D = 0.25% */
+	out32 (CFG_TSI108_CSR_BASE + TSI108_CLK_REG_OFFSET + CG_PLL1_CTRL1,
+		0x00000039);	/* BWADJ */
+
+	/* Initialize PLL0: CG_PB_CLKO  */
+	/* Detect PB clock freq. */
+	i = in32(CFG_TSI108_CSR_BASE + TSI108_CLK_REG_OFFSET + CG_PWRUP_STATUS);
+	i = (i >> 16) & 0x07;	/* Get PB PLL multiplier */
+
+	out32 (CFG_TSI108_CSR_BASE +
+		TSI108_CLK_REG_OFFSET + CG_PLL0_CTRL0, pll0_config[i].ctrl0);
+	out32 (CFG_TSI108_CSR_BASE +
+		TSI108_CLK_REG_OFFSET + CG_PLL0_CTRL1, pll0_config[i].ctrl1);
+
+	/* Wait and set SSEN for both PLL0 and 1 */
+	udelay (1000);
+	out32 (CFG_TSI108_CSR_BASE + TSI108_CLK_REG_OFFSET + CG_PLL1_CTRL0,
+		0x802e0044);	/* D=0.25% */
+	out32 (CFG_TSI108_CSR_BASE +
+		TSI108_CLK_REG_OFFSET + CG_PLL0_CTRL0,
+	 	0x80000000 | pll0_config[i].ctrl0);
+#endif	/* CFG_CLK_SPREAD */
+
+#ifdef CFG_L2
+	l2cache_enable ();
+#endif
+	printf ("BUS:   %d MHz\n", gd->bus_clk / 1000000);
+	printf ("MEM:   %d MHz\n", gd->mem_clk / 1000000);
+
+	/*
+	 * All the information needed to print the cache details is avaiblable
+	 * at this point i.e. above call to l2cache_enable is the very last
+	 * thing done with regards to enabling diabling the cache.
+	 * So this seems like a good place to print all this information
+	 */
+
+	printf ("CACHE: ");
+	switch (get_cpu_type()) {
+	case CPU_7447A:
+		printf ("L1 Instruction cache - 32KB 8-way");
+		(get_hid0 () & (1 << 15)) ? printf (" ENABLED\n") :
+			printf (" DISABLED\n");
+		printf ("L1 Data cache - 32KB 8-way");
+		(get_hid0 () & (1 << 14)) ? printf (" ENABLED\n") :
+			printf (" DISABLED\n");
+		printf ("Unified L2 cache - 512KB 8-way");
+		(get_l2cr () & (1 << 31)) ? printf (" ENABLED\n") :
+			printf (" DISABLED\n");
+		printf ("\n");
+		break;
+
+	case CPU_7448:
+		printf ("L1 Instruction cache - 32KB 8-way");
+		(get_hid0 () & (1 << 15)) ? printf (" ENABLED\n") :
+			printf (" DISABLED\n");
+		printf ("L1 Data cache - 32KB 8-way");
+		(get_hid0 () & (1 << 14)) ? printf (" ENABLED\n") :
+			printf (" DISABLED\n");
+		printf ("Unified L2 cache - 1MB 8-way");
+		(get_l2cr () & (1 << 31)) ? printf (" ENABLED\n") :
+			printf (" DISABLED\n");
+		break;
+	default:
+		break;
+	}
+	return 0;
+}
diff --git a/board/mpc7448hpc2/u-boot.lds b/board/mpc7448hpc2/u-boot.lds
new file mode 100644
index 0000000..8f24213
--- /dev/null
+++ b/board/mpc7448hpc2/u-boot.lds
@@ -0,0 +1,136 @@
+/*
+ * (C) Copyright 2001
+ * Josh Huber <huber@mclx.com>, Mission Critical Linux, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * u-boot.lds - linker script for U-Boot on mpc7448hpc2 Board.
+ */
+
+OUTPUT_ARCH(powerpc)
+SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
+/* Do we need any of these for elf?
+   __DYNAMIC = 0;    */
+SECTIONS
+{
+  /* Read-only sections, merged into text segment: */
+  . = + SIZEOF_HEADERS;
+  .interp : { *(.interp) }
+  .hash          : { *(.hash)		}
+  .dynsym        : { *(.dynsym)		}
+  .dynstr        : { *(.dynstr)		}
+  .rel.text      : { *(.rel.text)		}
+  .rela.text     : { *(.rela.text) 	}
+  .rel.data      : { *(.rel.data)		}
+  .rela.data     : { *(.rela.data) 	}
+  .rel.rodata    : { *(.rel.rodata) 	}
+  .rela.rodata   : { *(.rela.rodata) 	}
+  .rel.got       : { *(.rel.got)		}
+  .rela.got      : { *(.rela.got)		}
+  .rel.ctors     : { *(.rel.ctors)	}
+  .rela.ctors    : { *(.rela.ctors)	}
+  .rel.dtors     : { *(.rel.dtors)	}
+  .rela.dtors    : { *(.rela.dtors)	}
+  .rel.bss       : { *(.rel.bss)		}
+  .rela.bss      : { *(.rela.bss)		}
+  .rel.plt       : { *(.rel.plt)		}
+  .rela.plt      : { *(.rela.plt)		}
+  .init          : { *(.init)	}
+  .plt : { *(.plt) }
+  .text      :
+  {
+    cpu/74xx_7xx/start.o	(.text)
+
+/* store the environment in a seperate sector in the boot flash */
+/*    . = env_offset; */
+/*    common/environment.o(.text) */
+
+    *(.text)
+    *(.fixup)
+    *(.got1)
+  }
+  _etext = .;
+  PROVIDE (etext = .);
+  .rodata    :
+  {
+    *(.rodata)
+    *(.rodata1)
+    *(.rodata.str1.4)
+  }
+  .fini      : { *(.fini)    } =0
+  .ctors     : { *(.ctors)   }
+  .dtors     : { *(.dtors)   }
+
+  /* Read-write section, merged into data segment: */
+  . = (. + 0x00FF) & 0xFFFFFF00;
+  _erotext = .;
+  PROVIDE (erotext = .);
+  .reloc   :
+  {
+    *(.got)
+    _GOT2_TABLE_ = .;
+    *(.got2)
+    _FIXUP_TABLE_ = .;
+    *(.fixup)
+  }
+  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
+  __fixup_entries = (. - _FIXUP_TABLE_)>>2;
+
+  .data    :
+  {
+    *(.data)
+    *(.data1)
+    *(.sdata)
+    *(.sdata2)
+    *(.dynamic)
+    CONSTRUCTORS
+  }
+  _edata  =  .;
+  PROVIDE (edata = .);
+
+  . = .;
+  __u_boot_cmd_start = .;
+  .u_boot_cmd : { *(.u_boot_cmd) }
+  __u_boot_cmd_end = .;
+
+  . = .;
+  __start___ex_table = .;
+  __ex_table : { *(__ex_table) }
+  __stop___ex_table = .;
+
+  . = ALIGN(256);
+  __init_begin = .;
+  .text.init : { *(.text.init) }
+  .data.init : { *(.data.init) }
+  . = ALIGN(256);
+  __init_end = .;
+
+  __bss_start = .;
+  .bss       :
+  {
+   *(.sbss) *(.scommon)
+   *(.dynbss)
+   *(.bss)
+   *(COMMON)
+  }
+  _end = . ;
+  PROVIDE (end = .);
+}
diff --git a/cpu/74xx_7xx/cpu.c b/cpu/74xx_7xx/cpu.c
index f4e5fc5..9c8998b 100644
--- a/cpu/74xx_7xx/cpu.c
+++ b/cpu/74xx_7xx/cpu.c
@@ -44,6 +44,10 @@
 #include <74xx_7xx.h>
 #include <asm/cache.h>
 
+#if defined(CONFIG_OF_FLAT_TREE)
+#include <ft_build.h>
+#endif
+
 #ifdef CONFIG_AMIGAONEG3SE
 #include "../board/MAI/AmigaOneG3SE/via686.h"
 #include "../board/MAI/AmigaOneG3SE/memio.h"
@@ -101,6 +105,10 @@ get_cpu_type(void)
 		type = CPU_7457;
 		break;
 
+	case 0x8003:
+		type = CPU_7447A;
+		break;
+
 	case 0x8004:
 		type = CPU_7448;
 		break;
@@ -156,6 +164,10 @@ int checkcpu (void)
 		str = "MPC7410";
 		break;
 
+	case CPU_7447A:
+		str = "MPC7447A";
+		break;
+
 	case CPU_7448:
 		str = "MPC7448";
 		break;
@@ -264,20 +276,19 @@ do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 /*
  * For the 7400 the TB clock runs at 1/4 the cpu bus speed.
  */
-#ifdef CONFIG_AMIGAONEG3SE
+#if defined(CONFIG_AMIGAONEG3SE) || defined(CFG_CONFIG_BUS_CLK)
 unsigned long get_tbclk(void)
 {
 	return (gd->bus_clk / 4);
 }
-#else	/* ! CONFIG_AMIGAONEG3SE */
+#else	/* ! CONFIG_AMIGAONEG3SE and !CFG_CONFIG_BUS_CLK*/
 
 unsigned long get_tbclk (void)
 {
 	return CFG_BUS_HZ / 4;
 }
-#endif	/* CONFIG_AMIGAONEG3SE */
+#endif	/* CONFIG_AMIGAONEG3SE or CFG_CONFIG_BUS_CLK*/
 /* ------------------------------------------------------------------------- */
-
 #if defined(CONFIG_WATCHDOG)
 #if !defined(CONFIG_PCIPPC2) && !defined(CONFIG_BAB7xx)
 void
@@ -289,3 +300,30 @@ watchdog_reset(void)
 #endif	/* CONFIG_WATCHDOG */
 
 /* ------------------------------------------------------------------------- */
+
+#ifdef CONFIG_OF_FLAT_TREE
+void
+ft_cpu_setup (void *blob, bd_t *bd)
+{
+	u32 *p;
+	ulong clock;
+	int len;
+
+	clock = bd->bi_busfreq;
+
+	p = ft_get_prop (blob, "/cpus/" OF_CPU "/bus-frequency", &len);
+	if (p != NULL)
+		*p = cpu_to_be32 (clock);
+
+#if defined(CONFIG_TSI108_ETH)
+	p = ft_get_prop (blob, "/" OF_TSI "/ethernet@6200/address", &len);
+		memcpy (p, bd->bi_enetaddr, 6);
+#endif
+
+#if defined(CONFIG_HAS_ETH1)
+	p = ft_get_prop (blob, "/" OF_TSI "/ethernet@6600/address", &len);
+		memcpy (p, bd->bi_enet1addr, 6);
+#endif
+}
+#endif
+/* ------------------------------------------------------------------------- */
diff --git a/cpu/74xx_7xx/cpu_init.c b/cpu/74xx_7xx/cpu_init.c
index e02a4cc..1dd1b2c 100644
--- a/cpu/74xx_7xx/cpu_init.c
+++ b/cpu/74xx_7xx/cpu_init.c
@@ -43,6 +43,7 @@ cpu_init_f (void)
 	case CPU_7450:
 	case CPU_7455:
 	case CPU_7457:
+	case CPU_7447A:
 	case CPU_7448:
 		/* enable the timebase bit in HID0 */
 		set_hid0(get_hid0() | 0x4000000);
diff --git a/cpu/74xx_7xx/speed.c b/cpu/74xx_7xx/speed.c
index d1800ed..d8c40ce 100644
--- a/cpu/74xx_7xx/speed.c
+++ b/cpu/74xx_7xx/speed.c
@@ -31,6 +31,8 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
+extern unsigned long get_board_bus_clk (void);
+
 static const int hid1_multipliers_x_10[] = {
 	25,	/* 0000 - 2.5x */
 	75,	/* 0001 - 7.5x */
@@ -50,6 +52,42 @@ static const int hid1_multipliers_x_10[] = {
 	0	/* 1111 - off */
 };
 
+/* PLL_CFG[0:4] table for cpu 7448/7447A/7455/7457 */
+static const int hid1_74xx_multipliers_x_10[] = {
+	115,	/* 00000 - 11.5x  */
+	170,	/* 00001 - 17x    */
+	75,	/* 00010 -  7.5x  */
+	150,	/* 00011 - 15x    */
+	70,	/* 00100 -  7x    */
+	180,	/* 00101 - 18x    */
+	10,	/* 00110 - bypass */
+	200,	/* 00111 - 20x    */
+	20,	/* 01000 -  2x    */
+	210,	/* 01001 - 21x    */
+	65,	/* 01010 -  6.5x  */
+	130,	/* 01011 - 13x    */
+	85,	/* 01100 -  8.5x  */
+	240,	/* 01101 - 24x    */
+	95,	/* 01110 -  9.5x  */
+	90,	/* 01111 -  9x    */
+	30,	/* 10000 -  3x    */
+	105,	/* 10001 - 10.5x  */
+	55,	/* 10010 -  5.5x  */
+	110,	/* 10011 - 11x    */
+	40,	/* 10100 -  4x    */
+	100,	/* 10101 - 10x    */
+	50,	/* 10110 -  5x    */
+	120,	/* 10111 - 12x    */
+	80,	/* 11000 -  8x    */
+	140,	/* 11001 - 14x    */
+	60,	/* 11010 -  6x    */
+	160,	/* 11011 - 16x    */
+	135,	/* 11100 - 13.5x  */
+	280,	/* 11101 - 28x    */
+	0,	/* 11110 - off    */
+	125	/* 11111 - 12.5x  */
+};
+
 static const int hid1_fx_multipliers_x_10[] = {
 	00,	/* 0000 - off */
 	00,	/* 0001 - off */
@@ -89,22 +127,30 @@ int get_clocks (void)
 {
 	ulong clock = 0;
 
+#ifdef CFG_BUS_CLK
+	gd->bus_clk = CFG_BUS_CLK;	/* bus clock is a fixed frequency */
+#else
+	gd->bus_clk = get_board_bus_clk ();	/* bus clock is configurable */
+#endif
+
 	/* calculate the clock frequency based upon the CPU type */
 	switch (get_cpu_type()) {
+	case CPU_7447A:
 	case CPU_7448:
 	case CPU_7455:
 	case CPU_7457:
 		/*
-		 * It is assumed that the PLL_EXT line is zero.
 		 * Make sure division is done before multiplication to prevent 32-bit
 		 * arithmetic overflows which will cause a negative number
 		 */
-		clock = (CFG_BUS_CLK / 10) * hid1_multipliers_x_10[(get_hid1 () >> 13) & 0xF];
+		clock = (gd->bus_clk / 10) *
+			hid1_74xx_multipliers_x_10[(get_hid1 () >> 12) & 0x1F];
 		break;
 
 	case CPU_750GX:
 	case CPU_750FX:
-		clock = CFG_BUS_CLK * hid1_fx_multipliers_x_10[get_hid1 () >> 27] / 10;
+		clock = gd->bus_clk *
+			hid1_fx_multipliers_x_10[get_hid1 () >> 27] / 10;
 		break;
 
 	case CPU_7450:
@@ -121,7 +167,8 @@ int get_clocks (void)
 		 * Make sure division is done before multiplication to prevent 32-bit
 		 * arithmetic overflows which will cause a negative number
 		 */
-		clock = (CFG_BUS_CLK / 10) * hid1_multipliers_x_10[get_hid1 () >> 28];
+		clock = (gd->bus_clk / 10) *
+			hid1_multipliers_x_10[get_hid1 () >> 28];
 		break;
 
 	case CPU_UNKNOWN:
@@ -131,7 +178,6 @@ int get_clocks (void)
 	}
 
 	gd->cpu_clk = clock;
-	gd->bus_clk = CFG_BUS_CLK;
 
 	return (0);
 }
diff --git a/cpu/ppc4xx/44x_spd_ddr2.c b/cpu/ppc4xx/44x_spd_ddr2.c
index b56629b..2ecd3e4 100644
--- a/cpu/ppc4xx/44x_spd_ddr2.c
+++ b/cpu/ppc4xx/44x_spd_ddr2.c
@@ -1124,7 +1124,7 @@ static void program_codt(unsigned long *dimm_populated,
 				modt3 = 0x00000000;
 			}
 		}
-  	} else {
+	} else {
 		codt |= SDRAM_CODT_DQS_2_5_V_DDR1;
 		modt0 = 0x00000000;
 		modt1 = 0x00000000;
diff --git a/cpu/ppc4xx/start.S b/cpu/ppc4xx/start.S
index 3b1586c..a96083c 100644
--- a/cpu/ppc4xx/start.S
+++ b/cpu/ppc4xx/start.S
@@ -1892,11 +1892,11 @@ pll_wait:
 #endif /* CONFIG_405EP */
 
 #if defined(CONFIG_440)
-#define function_prolog(func_name)      .text; \
+#define function_prolog(func_name)	.text; \
 					.align 2; \
 					.globl func_name; \
 					func_name:
-#define function_epilog(func_name)      .type func_name,@function; \
+#define function_epilog(func_name)	.type func_name,@function; \
 					.size func_name,.-func_name
 
 /*----------------------------------------------------------------------------+
@@ -1952,13 +1952,13 @@ pll_wait:
 +----------------------------------------------------------------------------*/
 	function_prolog(dcbz_area)
 	rlwinm. r5,r4,0,27,31
-	rlwinm  r5,r4,27,5,31
-	beq     ..d_ra2
-	addi    r5,r5,0x0001
-..d_ra2:mtctr   r5
-..d_ag2:dcbz    r0,r3
-	addi    r3,r3,32
-	bdnz    ..d_ag2
+	rlwinm	r5,r4,27,5,31
+	beq	..d_ra2
+	addi	r5,r5,0x0001
+..d_ra2:mtctr	r5
+..d_ag2:dcbz	r0,r3
+	addi	r3,r3,32
+	bdnz	..d_ag2
 	sync
 	blr
 	function_epilog(dcbz_area)
@@ -1967,26 +1967,26 @@ pll_wait:
 | dflush.  Assume 32K at vector address is cachable.
 +----------------------------------------------------------------------------*/
 	function_prolog(dflush)
-	mfmsr   r9
-	rlwinm  r8,r9,0,15,13
-	rlwinm  r8,r8,0,17,15
-	mtmsr   r8
-	addi    r3,r0,0x0000
-	mtspr   dvlim,r3
-	mfspr   r3,ivpr
-	addi    r4,r0,1024
-	mtctr   r4
+	mfmsr	r9
+	rlwinm	r8,r9,0,15,13
+	rlwinm	r8,r8,0,17,15
+	mtmsr	r8
+	addi	r3,r0,0x0000
+	mtspr	dvlim,r3
+	mfspr	r3,ivpr
+	addi	r4,r0,1024
+	mtctr	r4
 ..dflush_loop:
-	lwz     r6,0x0(r3)
-	addi    r3,r3,32
-	bdnz    ..dflush_loop
-	addi    r3,r3,-32
-	mtctr   r4
-..ag:   dcbf    r0,r3
-	addi    r3,r3,-32
-	bdnz    ..ag
+	lwz	r6,0x0(r3)
+	addi	r3,r3,32
+	bdnz	..dflush_loop
+	addi	r3,r3,-32
+	mtctr	r4
+..ag:	dcbf	r0,r3
+	addi	r3,r3,-32
+	bdnz	..ag
 	sync
-	mtmsr   r9
+	mtmsr	r9
 	blr
 	function_epilog(dflush)
 #endif /* CONFIG_440 */
diff --git a/doc/README.mpc7448hpc2 b/doc/README.mpc7448hpc2
new file mode 100644
index 0000000..8659e83
--- /dev/null
+++ b/doc/README.mpc7448hpc2
@@ -0,0 +1,184 @@
+Freescale MPC7448hpc2 (Taiga) board
+===================================
+
+Created 08/11/2006 Roy Zang
+--------------------------
+MPC7448hpc2 (Taiga) board is a high-performance PowerPC server reference
+design, which is optimized for high speed throughput between the processor and
+the memory, disk drive and Ethernet port subsystems.
+
+MPC7448hpc2(Taiga) is designed to the micro-ATX chassis, allowing it to be
+used in 1U or 2U rack-mount chassis¡¯, as well as in standard ATX/Micro-ATX
+chassis.
+
+Building U-Boot
+------------------
+The mpc7448hpc2 code base is known to compile using:
+	Binutils 2.15, Gcc 3.4.3, Glibc 2.3.3
+
+	$ make mpc7448hpc2_config
+	Configuring for mpc7448hpc2 board...
+
+	$ make
+
+Memory Map
+----------
+
+The memory map is setup for Linux to operate properly.
+
+The mapping is:
+
+	Range Start	Range End	Definition			Size
+
+	0x0000_0000	0x7fff_ffff	DDR				2G
+	0xe000_0000	0xe7ff_ffff	PCI Memory			128M
+	0xfa00_0000	0xfaff_ffff	PCI IO				16M
+	0xfb00_0000	0xfbff_ffff	PCI Config			16M
+	0xfc00_0000	0xfc0f_ffff	NVRAM/CADMUS			1M
+	0xfe00_0000	0xfeff_ffff	PromJet				16M
+	0xff00_0000	0xff80_0000	FLASH (boot flash)		8M
+	0xff80_0000	0xffff_ffff	FLASH (second half flash)	8M
+
+Using Flash
+-----------
+
+The MPC7448hpc2 board has two "banks" of flash, each 8MB in size
+(2^23 = 0x00800000).
+
+Note: the "bank" here refers to half of the flash. In fact, there is only one
+bank of flash, which is divided into low and high half. Each is controlled by
+the most significant bit of the address bus. The so called "bank" is only for
+convenience.
+
+There is a switch which allows the "bank" to be selected.  The switch
+settings for updating flash are given below.
+
+The u-boot commands for copying the boot-bank into the secondary bank are
+as follows:
+
+	erase ff800000 ff880000
+	cp.b ff000000 ff800000 80000
+
+U-boot commands for downloading an image via tftp and flashing
+it into the secondary bank:
+
+	tftp 10000 <u-boot.bin.image>
+	erase ff000000 ff080000
+	cp.b 10000 ff000000 80000
+
+After copying the image into the second bank of flash, be sure to toggle
+SW3[4] on board before resetting the board in order to set the
+secondary bank as the boot-bank.
+
+Board Switches
+----------------------
+
+Most switches on the board should not be changed.  The most frequent
+user-settable switches on the board are used to configure
+the flash banks and determining the PCI frequency.
+
+SW1[1-5]: Processor core voltage
+
+	12345		Core Voltage
+	-----
+	SW1=01111	1.000V.
+	SW1=01101	1.100V.
+	SW1=01011	1.200V.
+	SW1=01001	1.300V only for MPC7447A.
+
+
+SW2[1-6]: CPU core frequency
+
+		CPU Core Frequency (MHz)
+			Bus Frequency
+	123456		100	133	167	200	Ratio
+
+	------
+	SW2=101100	500	667	833	1000	5x
+	SW2=100100	550	733	917	1100	5.5x
+	SW2=110100	600	800	1000	1200	6x
+	SW2=010100	650	866	1083	1300	6.5x
+	SW2=001000	700	930	1167	1400	7x
+	SW2=000100	750	1000	1250	1500	7.5x
+	SW2=110000	800	1066	1333	1600	8x
+	SW2=011000	850	1333	1417	1700	8.5x only for MPC7447A
+	SW2=011110	900	1200	1500	1800	9x
+
+This table shows only a subset of available frequency options; see the CPU
+hardware specifications for more information.
+
+SW2[7-8]: Bus Protocol and CPU Reset Option
+
+	7
+	-
+	SW2=0		System bus uses MPX bus protocol
+	SW2=1		System bus uses 60x bus protocol
+
+	8
+	-
+	SW2=0		TSI108 can cause CPU reset
+	SW2=1		TSI108 can not cause CPU reset
+
+SW3[1-8] system options
+
+	123
+	---
+	SW3=xxx		Connected to GPIO[0:2] on TSI108
+
+	4
+	-
+	SW3=0		CPU boots from low half of flash
+	SW3=1		CPU boots from high half of flash
+
+	5
+	-
+	SW3=0		SATA and slot2 connected to PCI bus
+	SW3=1		Only slot1 connected to PCI bus
+
+	6
+	-
+	SW3=0		USB connected to PCI bus
+	SW3=1		USB disconnected from PCI bus
+
+	7
+	-
+	SW3=0		Flash is write protected
+	SW3=1		Flash is NOT write protected
+
+	8
+	-
+	SW3=0		CPU will boot from flash
+	SW3=1		CPU will boot from PromJet
+
+SW4[1-3]: System bus frequency
+
+			Bus Frequency (MHz)
+	---
+	SW4=010			183
+	SW4=011			100
+	SW4=100			133
+	SW4=101			166 only for MPC7447A
+	SW4=110			200 only for MPC7448
+	others			reserved
+
+SW4[4-6]: DDR2 SDRAM frequency
+
+			Bus Frequency (MHz)
+	---
+	SW4=000		external clock
+	SW4=011		system clock
+	SW4=100		133
+	SW4=101		166
+	SW4=110		200
+	others		reserved
+
+SW4[7-8]: PCI/PCI-X frequency control
+	7
+	-
+	SW4=0		PCI/PCI-X bus operates normally
+	SW4=1		PCI bus forced to PCI-33 mode
+
+	8
+	-
+	SW4=0		PCI-X mode at 133 MHz allowed
+	SW4=1		PCI-X mode limited to 100 MHz
diff --git a/drivers/Makefile b/drivers/Makefile
index 2eac7c8..df9fbf2 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -35,8 +35,8 @@ COBJS	= 3c589.o 5701rls.o ali512x.o atmel_usart.o \
 	  lan91c96.o macb.o \
 	  natsemi.o ne2000.o netarm_eth.o netconsole.o \
 	  ns16550.o ns8382x.o ns87308.o ns7520_eth.o omap1510_i2c.o \
-	  omap24xx_i2c.o pci.o pci_auto.o pci_indirect.o \
-	  pcnet.o plb2800_eth.o \
+	  omap24xx_i2c.o pci.o pci_auto.o pci_indirect.o tsi108_pci.o\
+	  tsi108_i2c.o pcnet.o plb2800_eth.o \
 	  ps2ser.o ps2mult.o pc_keyb.o \
 	  rtl8019.o rtl8139.o rtl8169.o \
 	  s3c4510b_eth.o s3c4510b_uart.o \
@@ -45,7 +45,7 @@ COBJS	= 3c589.o 5701rls.o ali512x.o atmel_usart.o \
 	  serial_pl010.o serial_pl011.o serial_xuartlite.o \
 	  sl811_usb.o sm501.o smc91111.o smiLynxEM.o \
 	  status_led.o sym53c8xx.o systemace.o ahci.o \
-	  ti_pci1410a.o tigon3.o tsec.o \
+	  ti_pci1410a.o tigon3.o tsec.o tsi108_eth.o\
 	  usbdcore.o usbdcore_ep0.o usbdcore_omap1510.o usbtty.o \
 	  videomodes.o w83c553f.o \
 	  ks8695eth.o \
diff --git a/drivers/tsi108_eth.c b/drivers/tsi108_eth.c
new file mode 100644
index 0000000..47341be
--- /dev/null
+++ b/drivers/tsi108_eth.c
@@ -0,0 +1,1036 @@
+/***********************************************************************
+ *
+ * Copyright (c) 2005 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ * Description:
+ *   Ethernet interface for Tundra TSI108 bridge chip
+ *
+ ***********************************************************************/
+
+#include <config.h>
+
+#if (CONFIG_COMMANDS & CFG_CMD_NET) && defined(CONFIG_NET_MULTI) \
+	&& defined(CONFIG_TSI108_ETH)
+
+#if !defined(CONFIG_TSI108_ETH_NUM_PORTS) || (CONFIG_TSI108_ETH_NUM_PORTS > 2)
+#error "CONFIG_TSI108_ETH_NUM_PORTS must be defined as 1 or 2"
+#endif
+
+#include <common.h>
+#include <malloc.h>
+#include <net.h>
+#include <asm/cache.h>
+
+#ifdef DEBUG
+#define TSI108_ETH_DEBUG 7
+#else
+#define TSI108_ETH_DEBUG 0
+#endif
+
+#if TSI108_ETH_DEBUG > 0
+#define debug_lev(lev, fmt, args...) \
+if (lev <= TSI108_ETH_DEBUG) \
+printf ("%s %d: " fmt, __FUNCTION__, __LINE__, ##args)
+#else
+#define debug_lev(lev, fmt, args...) do{}while(0)
+#endif
+
+#define RX_PRINT_ERRORS
+#define TX_PRINT_ERRORS
+
+#define ETH_BASE	(CFG_TSI108_CSR_BASE + 0x6000)
+
+#define ETH_PORT_OFFSET	0x400
+
+#define __REG32(base, offset) (*((volatile u32 *)((char *)(base) + (offset))))
+
+#define reg_MAC_CONFIG_1(base)		__REG32(base, 0x00000000)
+#define MAC_CONFIG_1_TX_ENABLE		(0x00000001)
+#define MAC_CONFIG_1_SYNC_TX_ENABLE	(0x00000002)
+#define MAC_CONFIG_1_RX_ENABLE		(0x00000004)
+#define MAC_CONFIG_1_SYNC_RX_ENABLE	(0x00000008)
+#define MAC_CONFIG_1_TX_FLOW_CONTROL	(0x00000010)
+#define MAC_CONFIG_1_RX_FLOW_CONTROL	(0x00000020)
+#define MAC_CONFIG_1_LOOP_BACK		(0x00000100)
+#define MAC_CONFIG_1_RESET_TX_FUNCTION	(0x00010000)
+#define MAC_CONFIG_1_RESET_RX_FUNCTION	(0x00020000)
+#define MAC_CONFIG_1_RESET_TX_MAC	(0x00040000)
+#define MAC_CONFIG_1_RESET_RX_MAC	(0x00080000)
+#define MAC_CONFIG_1_SIM_RESET		(0x40000000)
+#define MAC_CONFIG_1_SOFT_RESET		(0x80000000)
+
+#define reg_MAC_CONFIG_2(base)		__REG32(base, 0x00000004)
+#define MAC_CONFIG_2_FULL_DUPLEX	(0x00000001)
+#define MAC_CONFIG_2_CRC_ENABLE		(0x00000002)
+#define MAC_CONFIG_2_PAD_CRC		(0x00000004)
+#define MAC_CONFIG_2_LENGTH_CHECK	(0x00000010)
+#define MAC_CONFIG_2_HUGE_FRAME		(0x00000020)
+#define MAC_CONFIG_2_INTERFACE_MODE(val)	(((val) & 0x3) << 8)
+#define MAC_CONFIG_2_PREAMBLE_LENGTH(val)	(((val) & 0xf) << 12)
+#define INTERFACE_MODE_NIBBLE		1	/* 10/100 Mb/s MII) */
+#define INTERFACE_MODE_BYTE		2	/* 1000 Mb/s GMII/TBI */
+
+#define reg_MAXIMUM_FRAME_LENGTH(base)		__REG32(base, 0x00000010)
+
+#define reg_MII_MGMT_CONFIG(base)		__REG32(base, 0x00000020)
+#define MII_MGMT_CONFIG_MGMT_CLOCK_SELECT(val)	((val) & 0x7)
+#define MII_MGMT_CONFIG_NO_PREAMBLE		(0x00000010)
+#define MII_MGMT_CONFIG_SCAN_INCREMENT		(0x00000020)
+#define MII_MGMT_CONFIG_RESET_MGMT		(0x80000000)
+
+#define reg_MII_MGMT_COMMAND(base)		__REG32(base, 0x00000024)
+#define MII_MGMT_COMMAND_READ_CYCLE		(0x00000001)
+#define MII_MGMT_COMMAND_SCAN_CYCLE		(0x00000002)
+
+#define reg_MII_MGMT_ADDRESS(base)		__REG32(base, 0x00000028)
+#define reg_MII_MGMT_CONTROL(base)		__REG32(base, 0x0000002c)
+#define reg_MII_MGMT_STATUS(base)		__REG32(base, 0x00000030)
+
+#define reg_MII_MGMT_INDICATORS(base)		__REG32(base, 0x00000034)
+#define MII_MGMT_INDICATORS_BUSY		(0x00000001)
+#define MII_MGMT_INDICATORS_SCAN		(0x00000002)
+#define MII_MGMT_INDICATORS_NOT_VALID		(0x00000004)
+
+#define reg_INTERFACE_STATUS(base)		__REG32(base, 0x0000003c)
+#define INTERFACE_STATUS_LINK_FAIL		(0x00000008)
+#define INTERFACE_STATUS_EXCESS_DEFER		(0x00000200)
+
+#define reg_STATION_ADDRESS_1(base)		__REG32(base, 0x00000040)
+#define reg_STATION_ADDRESS_2(base)		__REG32(base, 0x00000044)
+
+#define reg_PORT_CONTROL(base)			__REG32(base, 0x00000200)
+#define PORT_CONTROL_PRI		(0x00000001)
+#define PORT_CONTROL_BPT		(0x00010000)
+#define PORT_CONTROL_SPD		(0x00040000)
+#define PORT_CONTROL_RBC		(0x00080000)
+#define PORT_CONTROL_PRB		(0x00200000)
+#define PORT_CONTROL_DIS		(0x00400000)
+#define PORT_CONTROL_TBI		(0x00800000)
+#define PORT_CONTROL_STE		(0x10000000)
+#define PORT_CONTROL_ZOR		(0x20000000)
+#define PORT_CONTROL_CLR		(0x40000000)
+#define PORT_CONTROL_SRT		(0x80000000)
+
+#define reg_TX_CONFIG(base)		__REG32(base, 0x00000220)
+#define TX_CONFIG_START_Q		(0x00000003)
+#define TX_CONFIG_EHP			(0x00400000)
+#define TX_CONFIG_CHP			(0x00800000)
+#define TX_CONFIG_RST			(0x80000000)
+
+#define reg_TX_CONTROL(base)		__REG32(base, 0x00000224)
+#define TX_CONTROL_GO			(0x00008000)
+#define TX_CONTROL_MP			(0x01000000)
+#define TX_CONTROL_EAI			(0x20000000)
+#define TX_CONTROL_ABT			(0x40000000)
+#define TX_CONTROL_EII			(0x80000000)
+
+#define reg_TX_STATUS(base)		__REG32(base, 0x00000228)
+#define TX_STATUS_QUEUE_USABLE		(0x0000000f)
+#define TX_STATUS_CURR_Q		(0x00000300)
+#define TX_STATUS_ACT			(0x00008000)
+#define TX_STATUS_QUEUE_IDLE		(0x000f0000)
+#define TX_STATUS_EOQ_PENDING		(0x0f000000)
+
+#define reg_TX_EXTENDED_STATUS(base)		__REG32(base, 0x0000022c)
+#define TX_EXTENDED_STATUS_END_OF_QUEUE_CONDITION		(0x0000000f)
+#define TX_EXTENDED_STATUS_END_OF_FRAME_CONDITION		(0x00000f00)
+#define TX_EXTENDED_STATUS_DESCRIPTOR_INTERRUPT_CONDITION	(0x000f0000)
+#define TX_EXTENDED_STATUS_ERROR_FLAG				(0x0f000000)
+
+#define reg_TX_THRESHOLDS(base)			__REG32(base, 0x00000230)
+
+#define reg_TX_DIAGNOSTIC_ADDR(base)           __REG32(base, 0x00000270)
+#define TX_DIAGNOSTIC_ADDR_INDEX		(0x0000007f)
+#define TX_DIAGNOSTIC_ADDR_DFR			(0x40000000)
+#define TX_DIAGNOSTIC_ADDR_AI			(0x80000000)
+
+#define reg_TX_DIAGNOSTIC_DATA(base)		__REG32(base, 0x00000274)
+
+#define reg_TX_ERROR_STATUS(base)		__REG32(base, 0x00000278)
+#define TX_ERROR_STATUS				(0x00000278)
+#define TX_ERROR_STATUS_QUEUE_0_ERROR_RESPONSE	(0x0000000f)
+#define TX_ERROR_STATUS_TEA_ON_QUEUE_0		(0x00000010)
+#define TX_ERROR_STATUS_RER_ON_QUEUE_0		(0x00000020)
+#define TX_ERROR_STATUS_TER_ON_QUEUE_0		(0x00000040)
+#define TX_ERROR_STATUS_DER_ON_QUEUE_0		(0x00000080)
+#define TX_ERROR_STATUS_QUEUE_1_ERROR_RESPONSE	(0x00000f00)
+#define TX_ERROR_STATUS_TEA_ON_QUEUE_1		(0x00001000)
+#define TX_ERROR_STATUS_RER_ON_QUEUE_1		(0x00002000)
+#define TX_ERROR_STATUS_TER_ON_QUEUE_1		(0x00004000)
+#define TX_ERROR_STATUS_DER_ON_QUEUE_1		(0x00008000)
+#define TX_ERROR_STATUS_QUEUE_2_ERROR_RESPONSE	(0x000f0000)
+#define TX_ERROR_STATUS_TEA_ON_QUEUE_2		(0x00100000)
+#define TX_ERROR_STATUS_RER_ON_QUEUE_2		(0x00200000)
+#define TX_ERROR_STATUS_TER_ON_QUEUE_2		(0x00400000)
+#define TX_ERROR_STATUS_DER_ON_QUEUE_2		(0x00800000)
+#define TX_ERROR_STATUS_QUEUE_3_ERROR_RESPONSE	(0x0f000000)
+#define TX_ERROR_STATUS_TEA_ON_QUEUE_3		(0x10000000)
+#define TX_ERROR_STATUS_RER_ON_QUEUE_3		(0x20000000)
+#define TX_ERROR_STATUS_TER_ON_QUEUE_3		(0x40000000)
+#define TX_ERROR_STATUS_DER_ON_QUEUE_3		(0x80000000)
+
+#define reg_TX_QUEUE_0_CONFIG(base)		__REG32(base, 0x00000280)
+#define TX_QUEUE_0_CONFIG_OCN_PORT		(0x0000003f)
+#define TX_QUEUE_0_CONFIG_BSWP			(0x00000400)
+#define TX_QUEUE_0_CONFIG_WSWP			(0x00000800)
+#define TX_QUEUE_0_CONFIG_AM			(0x00004000)
+#define TX_QUEUE_0_CONFIG_GVI			(0x00008000)
+#define TX_QUEUE_0_CONFIG_EEI			(0x00010000)
+#define TX_QUEUE_0_CONFIG_ELI			(0x00020000)
+#define TX_QUEUE_0_CONFIG_ENI			(0x00040000)
+#define TX_QUEUE_0_CONFIG_ESI			(0x00080000)
+#define TX_QUEUE_0_CONFIG_EDI			(0x00100000)
+
+#define reg_TX_QUEUE_0_BUF_CONFIG(base)		__REG32(base, 0x00000284)
+#define TX_QUEUE_0_BUF_CONFIG_OCN_PORT		(0x0000003f)
+#define TX_QUEUE_0_BUF_CONFIG_BURST		(0x00000300)
+#define TX_QUEUE_0_BUF_CONFIG_BSWP		(0x00000400)
+#define TX_QUEUE_0_BUF_CONFIG_WSWP		(0x00000800)
+
+#define OCN_PORT_HLP			0	/* HLP Interface */
+#define OCN_PORT_PCI_X			1	/* PCI-X Interface */
+#define OCN_PORT_PROCESSOR_MASTER	2	/* Processor Interface (master) */
+#define OCN_PORT_PROCESSOR_SLAVE	3	/* Processor Interface (slave) */
+#define OCN_PORT_MEMORY			4	/* Memory Controller */
+#define OCN_PORT_DMA			5	/* DMA Controller */
+#define OCN_PORT_ETHERNET		6	/* Ethernet Controller */
+#define OCN_PORT_PRINT			7	/* Print Engine Interface */
+
+#define reg_TX_QUEUE_0_PTR_LOW(base)		__REG32(base, 0x00000288)
+
+#define reg_TX_QUEUE_0_PTR_HIGH(base)		__REG32(base, 0x0000028c)
+#define TX_QUEUE_0_PTR_HIGH_VALID		(0x80000000)
+
+#define reg_RX_CONFIG(base)			__REG32(base, 0x00000320)
+#define RX_CONFIG_DEF_Q				(0x00000003)
+#define RX_CONFIG_EMF				(0x00000100)
+#define RX_CONFIG_EUF				(0x00000200)
+#define RX_CONFIG_BFE				(0x00000400)
+#define RX_CONFIG_MFE				(0x00000800)
+#define RX_CONFIG_UFE				(0x00001000)
+#define RX_CONFIG_SE				(0x00002000)
+#define RX_CONFIG_ABF				(0x00200000)
+#define RX_CONFIG_APE				(0x00400000)
+#define RX_CONFIG_CHP				(0x00800000)
+#define RX_CONFIG_RST				(0x80000000)
+
+#define reg_RX_CONTROL(base)			__REG32(base, 0x00000324)
+#define GE_E0_RX_CONTROL_QUEUE_ENABLES		(0x0000000f)
+#define GE_E0_RX_CONTROL_GO			(0x00008000)
+#define GE_E0_RX_CONTROL_EAI			(0x20000000)
+#define GE_E0_RX_CONTROL_ABT			(0x40000000)
+#define GE_E0_RX_CONTROL_EII			(0x80000000)
+
+#define reg_RX_EXTENDED_STATUS(base)		__REG32(base, 0x0000032c)
+#define RX_EXTENDED_STATUS			(0x0000032c)
+#define RX_EXTENDED_STATUS_EOQ			(0x0000000f)
+#define RX_EXTENDED_STATUS_EOQ_0		(0x00000001)
+#define RX_EXTENDED_STATUS_EOF			(0x00000f00)
+#define RX_EXTENDED_STATUS_DESCRIPTOR_INTERRUPT_CONDITION	(0x000f0000)
+#define RX_EXTENDED_STATUS_ERROR_FLAG				(0x0f000000)
+
+#define reg_RX_THRESHOLDS(base)			__REG32(base, 0x00000330)
+
+#define reg_RX_DIAGNOSTIC_ADDR(base)		__REG32(base, 0x00000370)
+#define RX_DIAGNOSTIC_ADDR_INDEX		(0x0000007f)
+#define RX_DIAGNOSTIC_ADDR_DFR			(0x40000000)
+#define RX_DIAGNOSTIC_ADDR_AI			(0x80000000)
+
+#define reg_RX_DIAGNOSTIC_DATA(base)		__REG32(base, 0x00000374)
+
+#define reg_RX_QUEUE_0_CONFIG(base)		__REG32(base, 0x00000380)
+#define RX_QUEUE_0_CONFIG_OCN_PORT		(0x0000003f)
+#define RX_QUEUE_0_CONFIG_BSWP			(0x00000400)
+#define RX_QUEUE_0_CONFIG_WSWP			(0x00000800)
+#define RX_QUEUE_0_CONFIG_AM			(0x00004000)
+#define RX_QUEUE_0_CONFIG_EEI			(0x00010000)
+#define RX_QUEUE_0_CONFIG_ELI			(0x00020000)
+#define RX_QUEUE_0_CONFIG_ENI			(0x00040000)
+#define RX_QUEUE_0_CONFIG_ESI			(0x00080000)
+#define RX_QUEUE_0_CONFIG_EDI			(0x00100000)
+
+#define reg_RX_QUEUE_0_BUF_CONFIG(base)		__REG32(base, 0x00000384)
+#define RX_QUEUE_0_BUF_CONFIG_OCN_PORT		(0x0000003f)
+#define RX_QUEUE_0_BUF_CONFIG_BURST		(0x00000300)
+#define RX_QUEUE_0_BUF_CONFIG_BSWP		(0x00000400)
+#define RX_QUEUE_0_BUF_CONFIG_WSWP		(0x00000800)
+
+#define reg_RX_QUEUE_0_PTR_LOW(base)		__REG32(base, 0x00000388)
+
+#define reg_RX_QUEUE_0_PTR_HIGH(base)		__REG32(base, 0x0000038c)
+#define RX_QUEUE_0_PTR_HIGH_VALID		(0x80000000)
+
+/*
+ *  PHY register definitions
+ */
+/* the first 15 PHY registers are standard. */
+#define PHY_CTRL_REG		0	/* Control Register */
+#define PHY_STATUS_REG		1	/* Status Regiser */
+#define PHY_ID1_REG		2	/* Phy Id Reg (word 1) */
+#define PHY_ID2_REG		3	/* Phy Id Reg (word 2) */
+#define PHY_AN_ADV_REG		4	/* Autoneg Advertisement */
+#define PHY_LP_ABILITY_REG	5	/* Link Partner Ability (Base Page) */
+#define PHY_AUTONEG_EXP_REG	6	/* Autoneg Expansion Reg */
+#define PHY_NEXT_PAGE_TX_REG	7	/* Next Page TX */
+#define PHY_LP_NEXT_PAGE_REG	8	/* Link Partner Next Page */
+#define PHY_1000T_CTRL_REG	9	/* 1000Base-T Control Reg */
+#define PHY_1000T_STATUS_REG	10	/* 1000Base-T Status Reg */
+#define PHY_EXT_STATUS_REG	11	/* Extended Status Reg */
+
+/*
+ * PHY Register bit masks.
+ */
+#define PHY_CTRL_RESET		(1 << 15)
+#define PHY_CTRL_LOOPBACK	(1 << 14)
+#define PHY_CTRL_SPEED0		(1 << 13)
+#define PHY_CTRL_AN_EN		(1 << 12)
+#define PHY_CTRL_PWR_DN		(1 << 11)
+#define PHY_CTRL_ISOLATE	(1 << 10)
+#define PHY_CTRL_RESTART_AN	(1 << 9)
+#define PHY_CTRL_FULL_DUPLEX	(1 << 8)
+#define PHY_CTRL_CT_EN		(1 << 7)
+#define PHY_CTRL_SPEED1		(1 << 6)
+
+#define PHY_STAT_100BASE_T4	(1 << 15)
+#define PHY_STAT_100BASE_X_FD	(1 << 14)
+#define PHY_STAT_100BASE_X_HD	(1 << 13)
+#define PHY_STAT_10BASE_T_FD	(1 << 12)
+#define PHY_STAT_10BASE_T_HD	(1 << 11)
+#define PHY_STAT_100BASE_T2_FD	(1 << 10)
+#define PHY_STAT_100BASE_T2_HD	(1 << 9)
+#define PHY_STAT_EXT_STAT	(1 << 8)
+#define PHY_STAT_RESERVED	(1 << 7)
+#define PHY_STAT_MFPS		(1 << 6)	/* Management Frames Preamble Suppression */
+#define PHY_STAT_AN_COMPLETE	(1 << 5)
+#define PHY_STAT_REM_FAULT	(1 << 4)
+#define PHY_STAT_AN_CAP		(1 << 3)
+#define PHY_STAT_LINK_UP	(1 << 2)
+#define PHY_STAT_JABBER		(1 << 1)
+#define PHY_STAT_EXT_CAP	(1 << 0)
+
+#define TBI_CONTROL_2					0x11
+#define TBI_CONTROL_2_ENABLE_COMMA_DETECT		0x0001
+#define TBI_CONTROL_2_ENABLE_WRAP			0x0002
+#define TBI_CONTROL_2_G_MII_MODE			0x0010
+#define TBI_CONTROL_2_RECEIVE_CLOCK_SELECT		0x0020
+#define TBI_CONTROL_2_AUTO_NEGOTIATION_SENSE		0x0100
+#define TBI_CONTROL_2_DISABLE_TRANSMIT_RUNNING_DISPARITY	0x1000
+#define TBI_CONTROL_2_DISABLE_RECEIVE_RUNNING_DISPARITY		0x2000
+#define TBI_CONTROL_2_SHORTCUT_LINK_TIMER			0x4000
+#define TBI_CONTROL_2_SOFT_RESET				0x8000
+
+/* marvel specific */
+#define MV1111_EXT_CTRL1_REG	16	/* PHY Specific Control Reg */
+#define MV1111_SPEC_STAT_REG	17	/* PHY Specific Status Reg */
+#define MV1111_EXT_CTRL2_REG	20	/* Extended PHY Specific Control Reg */
+
+/*
+ * MARVELL 88E1111 PHY register bit masks
+ */
+/* PHY Specific Status Register (MV1111_EXT_CTRL1_REG) */
+
+#define SPEC_STAT_SPEED_MASK	(3 << 14)
+#define SPEC_STAT_FULL_DUP	(1 << 13)
+#define SPEC_STAT_PAGE_RCVD	(1 << 12)
+#define SPEC_STAT_RESOLVED	(1 << 11)	/* Speed and Duplex Resolved */
+#define SPEC_STAT_LINK_UP	(1 << 10)
+#define SPEC_STAT_CABLE_LEN_MASK	(7 << 7)/* Cable Length (100/1000 modes only) */
+#define SPEC_STAT_MDIX		(1 << 6)
+#define SPEC_STAT_POLARITY	(1 << 1)
+#define SPEC_STAT_JABBER	(1 << 0)
+
+#define SPEED_1000		(2 << 14)
+#define SPEED_100		(1 << 14)
+#define SPEED_10		(0 << 14)
+
+#define TBI_ADDR	0x1E	/* Ten Bit Interface address */
+
+/* negotiated link parameters */
+#define LINK_SPEED_UNKNOWN	0
+#define LINK_SPEED_10		1
+#define LINK_SPEED_100		2
+#define LINK_SPEED_1000		3
+
+#define LINK_DUPLEX_UNKNOWN	0
+#define LINK_DUPLEX_HALF	1
+#define LINK_DUPLEX_FULL	2
+
+static unsigned int phy_address[] = { 8, 9 };
+
+#define vuint32 volatile u32
+
+/* TX/RX buffer descriptors. MUST be cache line aligned in memory. (32 byte)
+ * This structure is accessed by the ethernet DMA engine which means it
+ * MUST be in LITTLE ENDIAN format */
+struct dma_descriptor {
+	vuint32 start_addr0;	/* buffer address, least significant bytes. */
+	vuint32 start_addr1;	/* buffer address, most significant bytes. */
+	vuint32 next_descr_addr0;/* next descriptor address, least significant bytes.  Must be 64-bit aligned. */
+	vuint32 next_descr_addr1;/* next descriptor address, most significant bytes. */
+	vuint32 vlan_byte_count;/* VLAN tag(top 2 bytes) and byte countt (bottom 2 bytes). */
+	vuint32 config_status;	/* Configuration/Status. */
+	vuint32 reserved1;	/* reserved to make the descriptor cache line aligned. */
+	vuint32 reserved2;	/* reserved to make the descriptor cache line aligned. */
+};
+
+/* last next descriptor address flag */
+#define DMA_DESCR_LAST		(1 << 31)
+
+/* TX DMA descriptor config status bits */
+#define DMA_DESCR_TX_EOF	(1 <<  0)	/* end of frame */
+#define DMA_DESCR_TX_SOF	(1 <<  1)	/* start of frame */
+#define DMA_DESCR_TX_PFVLAN	(1 <<  2)
+#define DMA_DESCR_TX_HUGE	(1 <<  3)
+#define DMA_DESCR_TX_PAD	(1 <<  4)
+#define DMA_DESCR_TX_CRC	(1 <<  5)
+#define DMA_DESCR_TX_DESCR_INT	(1 << 14)
+#define DMA_DESCR_TX_RETRY_COUNT	0x000F0000
+#define DMA_DESCR_TX_ONE_COLLISION	(1 << 20)
+#define DMA_DESCR_TX_LATE_COLLISION	(1 << 24)
+#define DMA_DESCR_TX_UNDERRUN		(1 << 25)
+#define DMA_DESCR_TX_RETRY_LIMIT	(1 << 26)
+#define DMA_DESCR_TX_OK			(1 << 30)
+#define DMA_DESCR_TX_OWNER		(1 << 31)
+
+/* RX DMA descriptor status bits */
+#define DMA_DESCR_RX_EOF		(1 <<  0)
+#define DMA_DESCR_RX_SOF		(1 <<  1)
+#define DMA_DESCR_RX_VTF		(1 <<  2)
+#define DMA_DESCR_RX_FRAME_IS_TYPE	(1 <<  3)
+#define DMA_DESCR_RX_SHORT_FRAME	(1 <<  4)
+#define DMA_DESCR_RX_HASH_MATCH		(1 <<  7)
+#define DMA_DESCR_RX_BAD_FRAME		(1 <<  8)
+#define DMA_DESCR_RX_OVERRUN		(1 <<  9)
+#define DMA_DESCR_RX_MAX_FRAME_LEN	(1 << 11)
+#define DMA_DESCR_RX_CRC_ERROR		(1 << 12)
+#define DMA_DESCR_RX_DESCR_INT		(1 << 13)
+#define DMA_DESCR_RX_OWNER		(1 << 15)
+
+#define RX_BUFFER_SIZE	PKTSIZE
+#define NUM_RX_DESC	PKTBUFSRX
+
+static struct dma_descriptor tx_descriptor __attribute__ ((aligned(32)));
+
+static struct dma_descriptor rx_descr_array[NUM_RX_DESC]
+	__attribute__ ((aligned(32)));
+
+static struct dma_descriptor *rx_descr_current;
+
+static int tsi108_eth_probe (struct eth_device *dev, bd_t * bis);
+static int tsi108_eth_send (struct eth_device *dev,
+			   volatile void *packet, int length);
+static int tsi108_eth_recv (struct eth_device *dev);
+static void tsi108_eth_halt (struct eth_device *dev);
+static unsigned int read_phy (unsigned int base,
+			     unsigned int phy_addr, unsigned int phy_reg);
+static void write_phy (unsigned int base,
+		      unsigned int phy_addr,
+		      unsigned int phy_reg, unsigned int phy_data);
+
+#if TSI108_ETH_DEBUG > 100
+/*
+ * print phy debug infomation
+ */
+static void dump_phy_regs (unsigned int phy_addr)
+{
+	int i;
+
+	printf ("PHY %d registers\n", phy_addr);
+	for (i = 0; i <= 30; i++) {
+		printf ("%2d  0x%04x\n", i, read_phy (ETH_BASE, phy_addr, i));
+	}
+	printf ("\n");
+
+}
+#else
+#define dump_phy_regs(base) do{}while(0)
+#endif
+
+#if TSI108_ETH_DEBUG > 100
+/*
+ * print debug infomation
+ */
+static void tx_diag_regs (unsigned int base)
+{
+	int i;
+	unsigned long dummy;
+
+	printf ("TX diagnostics registers\n");
+	reg_TX_DIAGNOSTIC_ADDR(base) = 0x00 | TX_DIAGNOSTIC_ADDR_AI;
+	udelay (1000);
+	dummy = reg_TX_DIAGNOSTIC_DATA(base);
+	for (i = 0x00; i <= 0x05; i++) {
+		udelay (1000);
+		printf ("0x%02x  0x%08x\n", i, reg_TX_DIAGNOSTIC_DATA(base));
+	}
+	reg_TX_DIAGNOSTIC_ADDR(base) = 0x40 | TX_DIAGNOSTIC_ADDR_AI;
+	udelay (1000);
+	dummy = reg_TX_DIAGNOSTIC_DATA(base);
+	for (i = 0x40; i <= 0x47; i++) {
+		udelay (1000);
+		printf ("0x%02x  0x%08x\n", i, reg_TX_DIAGNOSTIC_DATA(base));
+	}
+	printf ("\n");
+
+}
+#else
+#define tx_diag_regs(base) do{}while(0)
+#endif
+
+#if TSI108_ETH_DEBUG > 100
+/*
+ * print debug infomation
+ */
+static void rx_diag_regs (unsigned int base)
+{
+	int i;
+	unsigned long dummy;
+
+	printf ("RX diagnostics registers\n");
+	reg_RX_DIAGNOSTIC_ADDR(base) = 0x00 | RX_DIAGNOSTIC_ADDR_AI;
+	udelay (1000);
+	dummy = reg_RX_DIAGNOSTIC_DATA(base);
+	for (i = 0x00; i <= 0x05; i++) {
+		udelay (1000);
+		printf ("0x%02x  0x%08x\n", i, reg_RX_DIAGNOSTIC_DATA(base));
+	}
+	reg_RX_DIAGNOSTIC_ADDR(base) = 0x40 | RX_DIAGNOSTIC_ADDR_AI;
+	udelay (1000);
+	dummy = reg_RX_DIAGNOSTIC_DATA(base);
+	for (i = 0x08; i <= 0x0a; i++) {
+		udelay (1000);
+		printf ("0x%02x  0x%08x\n", i, reg_RX_DIAGNOSTIC_DATA(base));
+	}
+	printf ("\n");
+
+}
+#else
+#define rx_diag_regs(base) do{}while(0)
+#endif
+
+#if TSI108_ETH_DEBUG > 100
+/*
+ * print debug infomation
+ */
+static void debug_mii_regs (unsigned int base)
+{
+	printf ("MII_MGMT_CONFIG     0x%08x\n", reg_MII_MGMT_CONFIG(base));
+	printf ("MII_MGMT_COMMAND    0x%08x\n", reg_MII_MGMT_COMMAND(base));
+	printf ("MII_MGMT_ADDRESS    0x%08x\n", reg_MII_MGMT_ADDRESS(base));
+	printf ("MII_MGMT_CONTROL    0x%08x\n", reg_MII_MGMT_CONTROL(base));
+	printf ("MII_MGMT_STATUS     0x%08x\n", reg_MII_MGMT_STATUS(base));
+	printf ("MII_MGMT_INDICATORS 0x%08x\n", reg_MII_MGMT_INDICATORS(base));
+	printf ("\n");
+
+}
+#else
+#define debug_mii_regs(base) do{}while(0)
+#endif
+
+/*
+ * Wait until the phy bus is non-busy
+ */
+static void phy_wait (unsigned int base, unsigned int condition)
+{
+	int timeout;
+
+	timeout = 0;
+	while (reg_MII_MGMT_INDICATORS(base) & condition) {
+		udelay (10);
+		if (++timeout > 10000) {
+			printf ("ERROR: timeout waiting for phy bus (%d)\n",
+			       condition);
+			break;
+		}
+	}
+}
+
+/*
+ * read phy register
+ */
+static unsigned int read_phy (unsigned int base,
+			     unsigned int phy_addr, unsigned int phy_reg)
+{
+	unsigned int value;
+
+	phy_wait (base, MII_MGMT_INDICATORS_BUSY);
+
+	reg_MII_MGMT_ADDRESS(base) = (phy_addr << 8) | phy_reg;
+
+	/* Ensure that the Read Cycle bit is cleared prior to next read cycle */
+	reg_MII_MGMT_COMMAND(base) = 0;
+
+	/* start the read */
+	reg_MII_MGMT_COMMAND(base) = MII_MGMT_COMMAND_READ_CYCLE;
+
+	/* wait for the read to complete */
+	phy_wait (base,
+		 MII_MGMT_INDICATORS_NOT_VALID | MII_MGMT_INDICATORS_BUSY);
+
+	value = reg_MII_MGMT_STATUS(base);
+
+	reg_MII_MGMT_COMMAND(base) = 0;
+
+	return value;
+}
+
+/*
+ * write phy register
+ */
+static void write_phy (unsigned int base,
+		      unsigned int phy_addr,
+		      unsigned int phy_reg, unsigned int phy_data)
+{
+	phy_wait (base, MII_MGMT_INDICATORS_BUSY);
+
+	reg_MII_MGMT_ADDRESS(base) = (phy_addr << 8) | phy_reg;
+
+	/* Ensure that the Read Cycle bit is cleared prior to next cycle */
+	reg_MII_MGMT_COMMAND(base) = 0;
+
+	/* start the write */
+	reg_MII_MGMT_CONTROL(base) = phy_data;
+}
+
+/*
+ * configure the marvell 88e1111 phy
+ */
+static int marvell_88e_phy_config (struct eth_device *dev, int *speed,
+				  int *duplex)
+{
+	unsigned long base;
+	unsigned long phy_addr;
+	unsigned int phy_status;
+	unsigned int phy_spec_status;
+	int timeout;
+	int phy_speed;
+	int phy_duplex;
+	unsigned int value;
+
+	phy_speed = LINK_SPEED_UNKNOWN;
+	phy_duplex = LINK_DUPLEX_UNKNOWN;
+
+	base = dev->iobase;
+	phy_addr = (unsigned long)dev->priv;
+
+	/* Take the PHY out of reset. */
+	write_phy (ETH_BASE, phy_addr, PHY_CTRL_REG, PHY_CTRL_RESET);
+
+	/* Wait for the reset process to complete. */
+	udelay (10);
+	timeout = 0;
+	while ((phy_status =
+		read_phy (ETH_BASE, phy_addr, PHY_CTRL_REG)) & PHY_CTRL_RESET) {
+		udelay (10);
+		if (++timeout > 10000) {
+			printf ("ERROR: timeout waiting for phy reset\n");
+			break;
+		}
+	}
+
+	/* TBI Configuration. */
+	write_phy (base, TBI_ADDR, TBI_CONTROL_2, TBI_CONTROL_2_G_MII_MODE |
+		  TBI_CONTROL_2_RECEIVE_CLOCK_SELECT);
+	/* Wait for the link to be established. */
+	timeout = 0;
+	do {
+		udelay (20000);
+		phy_status = read_phy (ETH_BASE, phy_addr, PHY_STATUS_REG);
+		if (++timeout > 100) {
+			debug_lev(1, "ERROR: unable to establish link!!!\n");
+			break;
+		}
+	} while ((phy_status & PHY_STAT_LINK_UP) == 0);
+
+	if ((phy_status & PHY_STAT_LINK_UP) == 0)
+		return 0;
+
+	value = 0;
+	phy_spec_status = read_phy (ETH_BASE, phy_addr, MV1111_SPEC_STAT_REG);
+	if (phy_spec_status & SPEC_STAT_RESOLVED) {
+		switch (phy_spec_status & SPEC_STAT_SPEED_MASK) {
+		case SPEED_1000:
+			phy_speed = LINK_SPEED_1000;
+			value |= PHY_CTRL_SPEED1;
+			break;
+		case SPEED_100:
+			phy_speed = LINK_SPEED_100;
+			value |= PHY_CTRL_SPEED0;
+			break;
+		case SPEED_10:
+			phy_speed = LINK_SPEED_10;
+			break;
+		}
+		if (phy_spec_status & SPEC_STAT_FULL_DUP) {
+			phy_duplex = LINK_DUPLEX_FULL;
+			value |= PHY_CTRL_FULL_DUPLEX;
+		} else
+			phy_duplex = LINK_DUPLEX_HALF;
+	}
+	/* set TBI speed */
+	write_phy (base, TBI_ADDR, PHY_CTRL_REG, value);
+	write_phy (base, TBI_ADDR, PHY_AN_ADV_REG, 0x0060);
+
+#if TSI108_ETH_DEBUG > 0
+	printf ("%s link is up", dev->name);
+	phy_spec_status = read_phy (ETH_BASE, phy_addr, MV1111_SPEC_STAT_REG);
+	if (phy_spec_status & SPEC_STAT_RESOLVED) {
+		switch (phy_speed) {
+		case LINK_SPEED_1000:
+			printf (", 1000 Mbps");
+			break;
+		case LINK_SPEED_100:
+			printf (", 100 Mbps");
+			break;
+		case LINK_SPEED_10:
+			printf (", 10 Mbps");
+			break;
+		}
+		if (phy_duplex == LINK_DUPLEX_FULL)
+			printf (", Full duplex");
+		else
+			printf (", Half duplex");
+	}
+	printf ("\n");
+#endif
+
+	dump_phy_regs (TBI_ADDR);
+	if (speed)
+		*speed = phy_speed;
+	if (duplex)
+		*duplex = phy_duplex;
+
+	return 1;
+}
+
+/*
+ * External interface
+ *
+ * register the tsi108 ethernet controllers with the multi-ethernet system
+ */
+int tsi108_eth_initialize (bd_t * bis)
+{
+	struct eth_device *dev;
+	int index;
+
+	for (index = 0; index < CONFIG_TSI108_ETH_NUM_PORTS; index++) {
+		dev = (struct eth_device *)malloc(sizeof(struct eth_device));
+
+		sprintf (dev->name, "TSI108_eth%d", index);
+
+		dev->iobase = ETH_BASE + (index * ETH_PORT_OFFSET);
+		dev->priv = (void *)(phy_address[index]);
+		dev->init = tsi108_eth_probe;
+		dev->halt = tsi108_eth_halt;
+		dev->send = tsi108_eth_send;
+		dev->recv = tsi108_eth_recv;
+
+		eth_register(dev);
+	}
+	return index;
+}
+
+/*
+ * probe for and initialize a single ethernet interface
+ */
+static int tsi108_eth_probe (struct eth_device *dev, bd_t * bis)
+{
+	unsigned long base;
+	unsigned long value;
+	int index;
+	struct dma_descriptor *tx_descr;
+	struct dma_descriptor *rx_descr;
+	int speed;
+	int duplex;
+
+	base = dev->iobase;
+
+	reg_PORT_CONTROL(base) = PORT_CONTROL_STE | PORT_CONTROL_BPT;
+
+	/* Bring DMA/FIFO out of reset. */
+	reg_TX_CONFIG(base) = 0x00000000;
+	reg_RX_CONFIG(base) = 0x00000000;
+
+	reg_TX_THRESHOLDS(base) = (192 << 16) | 192;
+	reg_RX_THRESHOLDS(base) = (192 << 16) | 112;
+
+	/* Bring MAC out of reset. */
+	reg_MAC_CONFIG_1(base) = 0x00000000;
+
+	/* DMA MAC configuration. */
+	reg_MAC_CONFIG_1(base) =
+	    MAC_CONFIG_1_RX_ENABLE | MAC_CONFIG_1_TX_ENABLE;
+
+	reg_MII_MGMT_CONFIG(base) = MII_MGMT_CONFIG_NO_PREAMBLE;
+	reg_MAXIMUM_FRAME_LENGTH(base) = RX_BUFFER_SIZE;
+
+	/* Note: Early tsi108 manual did not have correct byte order
+	 * for the station address.*/
+	reg_STATION_ADDRESS_1(base) = (dev->enetaddr[5] << 24) |
+	    (dev->enetaddr[4] << 16) |
+	    (dev->enetaddr[3] << 8) | (dev->enetaddr[2] << 0);
+
+	reg_STATION_ADDRESS_2(base) = (dev->enetaddr[1] << 24) |
+	    (dev->enetaddr[0] << 16);
+
+	if (marvell_88e_phy_config(dev, &speed, &duplex) == 0)
+		return 0;
+
+	value =
+	    MAC_CONFIG_2_PREAMBLE_LENGTH(7) | MAC_CONFIG_2_PAD_CRC |
+	    MAC_CONFIG_2_CRC_ENABLE;
+	if (speed == LINK_SPEED_1000)
+		value |= MAC_CONFIG_2_INTERFACE_MODE(INTERFACE_MODE_BYTE);
+	else {
+		value |= MAC_CONFIG_2_INTERFACE_MODE(INTERFACE_MODE_NIBBLE);
+		reg_PORT_CONTROL(base) |= PORT_CONTROL_SPD;
+	}
+	if (duplex == LINK_DUPLEX_FULL) {
+		value |= MAC_CONFIG_2_FULL_DUPLEX;
+		reg_PORT_CONTROL(base) &= ~PORT_CONTROL_BPT;
+	} else
+		reg_PORT_CONTROL(base) |= PORT_CONTROL_BPT;
+	reg_MAC_CONFIG_2(base) = value;
+
+	reg_RX_CONFIG(base) = RX_CONFIG_SE;
+	reg_RX_QUEUE_0_CONFIG(base) = OCN_PORT_MEMORY;
+	reg_RX_QUEUE_0_BUF_CONFIG(base) = OCN_PORT_MEMORY;
+
+	/* initialize the RX DMA descriptors */
+	rx_descr = &rx_descr_array[0];
+	rx_descr_current = rx_descr;
+	for (index = 0; index < NUM_RX_DESC; index++) {
+		/* make sure the receive buffers are not in cache */
+		invalidate_dcache_range((unsigned long)NetRxPackets[index],
+					(unsigned long)NetRxPackets[index] +
+					RX_BUFFER_SIZE);
+		rx_descr->start_addr0 =
+		    cpu_to_le32((vuint32) NetRxPackets[index]);
+		rx_descr->start_addr1 = 0;
+		rx_descr->next_descr_addr0 =
+		    cpu_to_le32((vuint32) (rx_descr + 1));
+		rx_descr->next_descr_addr1 = 0;
+		rx_descr->vlan_byte_count = 0;
+		rx_descr->config_status = cpu_to_le32((RX_BUFFER_SIZE << 16) |
+						      DMA_DESCR_RX_OWNER);
+		rx_descr++;
+	}
+	rx_descr--;
+	rx_descr->next_descr_addr0 = 0;
+	rx_descr->next_descr_addr1 = cpu_to_le32(DMA_DESCR_LAST);
+	/* Push the descriptors to RAM so the ethernet DMA can see them */
+	invalidate_dcache_range((unsigned long)rx_descr_array,
+				(unsigned long)rx_descr_array +
+				sizeof(rx_descr_array));
+
+	/* enable RX queue */
+	reg_RX_CONTROL(base) = TX_CONTROL_GO | 0x01;
+	reg_RX_QUEUE_0_PTR_LOW(base) = (u32) rx_descr_current;
+	/* enable receive DMA */
+	reg_RX_QUEUE_0_PTR_HIGH(base) = RX_QUEUE_0_PTR_HIGH_VALID;
+
+	reg_TX_QUEUE_0_CONFIG(base) = OCN_PORT_MEMORY;
+	reg_TX_QUEUE_0_BUF_CONFIG(base) = OCN_PORT_MEMORY;
+
+	/* initialize the TX DMA descriptor */
+	tx_descr = &tx_descriptor;
+
+	tx_descr->start_addr0 = 0;
+	tx_descr->start_addr1 = 0;
+	tx_descr->next_descr_addr0 = 0;
+	tx_descr->next_descr_addr1 = cpu_to_le32(DMA_DESCR_LAST);
+	tx_descr->vlan_byte_count = 0;
+	tx_descr->config_status = cpu_to_le32(DMA_DESCR_TX_OK |
+					      DMA_DESCR_TX_SOF |
+					      DMA_DESCR_TX_EOF);
+	/* enable TX queue */
+	reg_TX_CONTROL(base) = TX_CONTROL_GO | 0x01;
+
+	return 1;
+}
+
+/*
+ * send a packet
+ */
+static int tsi108_eth_send (struct eth_device *dev,
+			   volatile void *packet, int length)
+{
+	unsigned long base;
+	int timeout;
+	struct dma_descriptor *tx_descr;
+	unsigned long status;
+
+	base = dev->iobase;
+	tx_descr = &tx_descriptor;
+
+	/* Wait until the last packet has been transmitted. */
+	timeout = 0;
+	do {
+		/* make sure we see the changes made by the DMA engine */
+		invalidate_dcache_range((unsigned long)tx_descr,
+					(unsigned long)tx_descr +
+					sizeof(struct dma_descriptor));
+
+		if (timeout != 0)
+			udelay (15);
+		if (++timeout > 10000) {
+			tx_diag_regs(base);
+			debug_lev(1,
+				  "ERROR: timeout waiting for last transmit packet to be sent\n");
+			return 0;
+		}
+	} while (tx_descr->config_status & cpu_to_le32(DMA_DESCR_TX_OWNER));
+
+	status = le32_to_cpu(tx_descr->config_status);
+	if ((status & DMA_DESCR_TX_OK) == 0) {
+#ifdef TX_PRINT_ERRORS
+		printf ("TX packet error: 0x%08x\n    %s%s%s%s\n", status,
+		       status & DMA_DESCR_TX_OK ? "tx error, " : "",
+		       status & DMA_DESCR_TX_RETRY_LIMIT ?
+		       "retry limit reached, " : "",
+		       status & DMA_DESCR_TX_UNDERRUN ? "underrun, " : "",
+		       status & DMA_DESCR_TX_LATE_COLLISION ? "late collision, "
+		       : "");
+#endif
+	}
+
+	debug_lev (9, "sending packet %d\n", length);
+	tx_descr->start_addr0 = cpu_to_le32((vuint32) packet);
+	tx_descr->start_addr1 = 0;
+	tx_descr->next_descr_addr0 = 0;
+	tx_descr->next_descr_addr1 = cpu_to_le32(DMA_DESCR_LAST);
+	tx_descr->vlan_byte_count = cpu_to_le32(length);
+	tx_descr->config_status = cpu_to_le32(DMA_DESCR_TX_OWNER |
+					      DMA_DESCR_TX_CRC |
+					      DMA_DESCR_TX_PAD |
+					      DMA_DESCR_TX_SOF |
+					      DMA_DESCR_TX_EOF);
+
+	invalidate_dcache_range((unsigned long)tx_descr,
+				(unsigned long)tx_descr +
+				sizeof(struct dma_descriptor));
+
+	invalidate_dcache_range((unsigned long)packet,
+				(unsigned long)packet + length);
+
+	reg_TX_QUEUE_0_PTR_LOW(base) = (u32) tx_descr;
+	reg_TX_QUEUE_0_PTR_HIGH(base) = TX_QUEUE_0_PTR_HIGH_VALID;
+
+	return length;
+}
+
+/*
+ * Check for received packets and send them up the protocal stack
+ */
+static int tsi108_eth_recv (struct eth_device *dev)
+{
+	struct dma_descriptor *rx_descr;
+	unsigned long base;
+	int length = 0;
+	unsigned long status;
+	volatile uchar *buffer;
+
+	base = dev->iobase;
+
+	/* make sure we see the changes made by the DMA engine */
+	invalidate_dcache_range ((unsigned long)rx_descr_array,
+				(unsigned long)rx_descr_array +
+				sizeof(rx_descr_array));
+
+	/* process all of the received packets */
+	rx_descr = rx_descr_current;
+	while ((rx_descr->config_status & cpu_to_le32(DMA_DESCR_RX_OWNER)) == 0) {
+		/* check for error */
+		status = le32_to_cpu(rx_descr->config_status);
+		if (status & DMA_DESCR_RX_BAD_FRAME) {
+#ifdef RX_PRINT_ERRORS
+			printf ("RX packet error: 0x%08x\n    %s%s%s%s%s%s\n",
+			       status,
+			       status & DMA_DESCR_RX_FRAME_IS_TYPE ? "too big, "
+			       : "",
+			       status & DMA_DESCR_RX_SHORT_FRAME ? "too short, "
+			       : "",
+			       status & DMA_DESCR_RX_BAD_FRAME ? "bad frame, " :
+			       "",
+			       status & DMA_DESCR_RX_OVERRUN ? "overrun, " : "",
+			       status & DMA_DESCR_RX_MAX_FRAME_LEN ?
+			       "max length, " : "",
+			       status & DMA_DESCR_RX_CRC_ERROR ? "CRC error, " :
+			       "");
+#endif
+		} else {
+			length =
+			    le32_to_cpu(rx_descr->vlan_byte_count) & 0xFFFF;
+
+			/*** process packet ***/
+			buffer =
+			    (volatile uchar
+			     *)(le32_to_cpu (rx_descr->start_addr0));
+			NetReceive (buffer, length);
+
+			invalidate_dcache_range ((unsigned long)buffer,
+						(unsigned long)buffer +
+						RX_BUFFER_SIZE);
+		}
+		/* Give this buffer back to the DMA engine */
+		rx_descr->vlan_byte_count = 0;
+		rx_descr->config_status = cpu_to_le32 ((RX_BUFFER_SIZE << 16) |
+						      DMA_DESCR_RX_OWNER);
+		/* move descriptor pointer forward */
+		rx_descr =
+		    (struct dma_descriptor
+		     *)(le32_to_cpu (rx_descr->next_descr_addr0));
+		if (rx_descr == 0)
+			rx_descr = &rx_descr_array[0];
+	}
+	/* remember where we are for next time */
+	rx_descr_current = rx_descr;
+
+	/* If the DMA engine has reached the end of the queue
+	 * start over at the begining */
+	if (reg_RX_EXTENDED_STATUS(base) & RX_EXTENDED_STATUS_EOQ_0) {
+
+		reg_RX_EXTENDED_STATUS(base) = RX_EXTENDED_STATUS_EOQ_0;
+		reg_RX_QUEUE_0_PTR_LOW(base) = (u32) & rx_descr_array[0];
+		reg_RX_QUEUE_0_PTR_HIGH(base) = RX_QUEUE_0_PTR_HIGH_VALID;
+	}
+
+	return length;
+}
+
+/*
+ * disable an ethernet interface
+ */
+static void tsi108_eth_halt (struct eth_device *dev)
+{
+	unsigned long base;
+
+	base = dev->iobase;
+
+	/* Put DMA/FIFO into reset state. */
+	reg_TX_CONFIG(base) = TX_CONFIG_RST;
+	reg_RX_CONFIG(base) = RX_CONFIG_RST;
+
+	/* Put MAC into reset state. */
+	reg_MAC_CONFIG_1(base) = MAC_CONFIG_1_SOFT_RESET;
+}
+
+#endif
diff --git a/drivers/tsi108_i2c.c b/drivers/tsi108_i2c.c
new file mode 100644
index 0000000..eb52cb6
--- /dev/null
+++ b/drivers/tsi108_i2c.c
@@ -0,0 +1,283 @@
+/*
+ * (C) Copyright 2004 Tundra Semiconductor Corp.
+ * Author: Alex Bounine
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+#include <config.h>
+#include <common.h>
+
+#ifdef CONFIG_TSI108_I2C
+#include <tsi108.h>
+
+#if (CONFIG_COMMANDS & CFG_CMD_I2C)
+
+#define I2C_DELAY	100000
+#undef  DEBUG_I2C
+
+#ifdef DEBUG_I2C
+#define DPRINT(x) printf (x)
+#else
+#define DPRINT(x)
+#endif
+
+/* All functions assume that Tsi108 I2C block is the only master on the bus */
+/* I2C read helper function */
+
+static int i2c_read_byte (
+		uint i2c_chan,	/* I2C channel number: 0 - main, 1 - SDC SPD */
+		uchar chip_addr,/* I2C device address on the bus */
+		uint byte_addr,	/* Byte address within I2C device */
+		uchar * buffer	/* pointer to data buffer */
+		)
+{
+	u32 temp;
+	u32 to_count = I2C_DELAY;
+	u32 op_status = TSI108_I2C_TIMEOUT_ERR;
+	u32 chan_offset = TSI108_I2C_OFFSET;
+
+	DPRINT (("I2C read_byte() %d 0x%02x 0x%02x\n",
+		i2c_chan, chip_addr, byte_addr));
+
+	if (0 != i2c_chan)
+		chan_offset = TSI108_I2C_SDRAM_OFFSET;
+
+	/* Check if I2C operation is in progress */
+	temp = *(u32 *) (CFG_TSI108_CSR_BASE + chan_offset + I2C_CNTRL2);
+
+	if (0 == (temp & (I2C_CNTRL2_RD_STATUS | I2C_CNTRL2_WR_STATUS |
+			  I2C_CNTRL2_START))) {
+		/* Set device address and operation (read = 0) */
+		temp = (byte_addr << 16) | ((chip_addr & 0x07) << 8) |
+		    ((chip_addr >> 3) & 0x0F);
+		*(u32 *) (CFG_TSI108_CSR_BASE + chan_offset + I2C_CNTRL1) =
+		    temp;
+
+		/* Issue the read command
+		 * (at this moment all other parameters are 0
+		 * (size = 1 byte, lane = 0)
+		 */
+
+		*(u32 *) (CFG_TSI108_CSR_BASE + chan_offset + I2C_CNTRL2) =
+		    (I2C_CNTRL2_START);
+
+		/* Wait until operation completed */
+		do {
+			/* Read I2C operation status */
+			temp = *(u32 *) (CFG_TSI108_CSR_BASE + chan_offset + I2C_CNTRL2);
+
+			if (0 == (temp & (I2C_CNTRL2_RD_STATUS | I2C_CNTRL2_START))) {
+				if (0 == (temp &
+				     (I2C_CNTRL2_I2C_CFGERR |
+				      I2C_CNTRL2_I2C_TO_ERR))
+				    ) {
+					op_status = TSI108_I2C_SUCCESS;
+
+					temp = *(u32 *) (CFG_TSI108_CSR_BASE +
+							 chan_offset +
+							 I2C_RD_DATA);
+
+					*buffer = (u8) (temp & 0xFF);
+				} else {
+					/* report HW error */
+					op_status = TSI108_I2C_IF_ERROR;
+
+					DPRINT (("I2C HW error reported: 0x%02x\n", temp));
+				}
+
+				break;
+			}
+		} while (to_count--);
+	} else {
+		op_status = TSI108_I2C_IF_BUSY;
+
+		DPRINT (("I2C Transaction start failed: 0x%02x\n", temp));
+	}
+
+	DPRINT (("I2C read_byte() status: 0x%02x\n", op_status));
+	return op_status;
+}
+
+/*
+ * I2C Read interface as defined in "include/i2c.h" :
+ *   chip_addr: I2C chip address, range 0..127
+ *                  (to read from SPD channel EEPROM use (0xD0 ... 0xD7)
+ *              NOTE: The bit 7 in the chip_addr serves as a channel select.
+ *              This hack is for enabling "isdram" command on Tsi108 boards
+ *              without changes to common code. Used for I2C reads only.
+ *   byte_addr: Memory or register address within the chip
+ *   alen:      Number of bytes to use for addr (typically 1, 2 for larger
+ *              memories, 0 for register type devices with only one
+ *              register)
+ *   buffer:    Pointer to destination buffer for data to be read
+ *   len:       How many bytes to read
+ *
+ *   Returns: 0 on success, not 0 on failure
+ */
+
+int i2c_read (uchar chip_addr, uint byte_addr, int alen,
+		uchar * buffer, int len)
+{
+	u32 op_status = TSI108_I2C_PARAM_ERR;
+	u32 i2c_if = 0;
+
+	/* Hack to support second (SPD) I2C controller (SPD EEPROM read only).*/
+	if (0xD0 == (chip_addr & ~0x07)) {
+		i2c_if = 1;
+		chip_addr &= 0x7F;
+	}
+	/* Check for valid I2C address */
+	if (chip_addr <= 0x7F && (byte_addr + len) <= (0x01 << (alen * 8))) {
+		while (len--) {
+			op_status = i2c_read_byte(i2c_if, chip_addr, byte_addr++, buffer++);
+
+			if (TSI108_I2C_SUCCESS != op_status) {
+				DPRINT (("I2C read_byte() failed: 0x%02x (%d left)\n", op_status, len));
+
+				break;
+			}
+		}
+	}
+
+	DPRINT (("I2C read() status: 0x%02x\n", op_status));
+	return op_status;
+}
+
+/* I2C write helper function */
+
+static int i2c_write_byte (uchar chip_addr,/* I2C device address on the bus */
+			  uint byte_addr, /* Byte address within I2C device */
+			  uchar * buffer  /*  pointer to data buffer */
+			  )
+{
+	u32 temp;
+	u32 to_count = I2C_DELAY;
+	u32 op_status = TSI108_I2C_TIMEOUT_ERR;
+
+	/* Check if I2C operation is in progress */
+	temp = *(u32 *) (CFG_TSI108_CSR_BASE + TSI108_I2C_OFFSET + I2C_CNTRL2);
+
+	if (0 == (temp & (I2C_CNTRL2_RD_STATUS | I2C_CNTRL2_WR_STATUS | I2C_CNTRL2_START))) {
+		/* Place data into the I2C Tx Register */
+		*(u32 *) (CFG_TSI108_CSR_BASE + TSI108_I2C_OFFSET +
+			  I2C_TX_DATA) = (u32) * buffer;
+
+		/* Set device address and operation  */
+		temp =
+		    I2C_CNTRL1_I2CWRITE | (byte_addr << 16) |
+		    ((chip_addr & 0x07) << 8) | ((chip_addr >> 3) & 0x0F);
+		*(u32 *) (CFG_TSI108_CSR_BASE + TSI108_I2C_OFFSET +
+			  I2C_CNTRL1) = temp;
+
+		/* Issue the write command (at this moment all other parameters
+		 * are 0 (size = 1 byte, lane = 0)
+		 */
+
+		*(u32 *) (CFG_TSI108_CSR_BASE + TSI108_I2C_OFFSET +
+			  I2C_CNTRL2) = (I2C_CNTRL2_START);
+
+		op_status = TSI108_I2C_TIMEOUT_ERR;
+
+		/* Wait until operation completed */
+		do {
+			/* Read I2C operation status */
+			temp = *(u32 *) (CFG_TSI108_CSR_BASE + TSI108_I2C_OFFSET + I2C_CNTRL2);
+
+			if (0 == (temp & (I2C_CNTRL2_WR_STATUS | I2C_CNTRL2_START))) {
+				if (0 == (temp &
+				     (I2C_CNTRL2_I2C_CFGERR |
+				      I2C_CNTRL2_I2C_TO_ERR))) {
+					op_status = TSI108_I2C_SUCCESS;
+				} else {
+					/* report detected HW error */
+					op_status = TSI108_I2C_IF_ERROR;
+
+					DPRINT (("I2C HW error reported: 0x%02x\n", temp));
+				}
+
+				break;
+			}
+
+		} while (to_count--);
+	} else {
+		op_status = TSI108_I2C_IF_BUSY;
+
+		DPRINT (("I2C Transaction start failed: 0x%02x\n", temp));
+	}
+
+	return op_status;
+}
+
+/*
+ * I2C Write interface as defined in "include/i2c.h" :
+ *   chip_addr: I2C chip address, range 0..127
+ *   byte_addr: Memory or register address within the chip
+ *   alen:      Number of bytes to use for addr (typically 1, 2 for larger
+ *              memories, 0 for register type devices with only one
+ *              register)
+ *   buffer:    Pointer to data to be written
+ *   len:       How many bytes to write
+ *
+ *   Returns: 0 on success, not 0 on failure
+ */
+
+int i2c_write (uchar chip_addr, uint byte_addr, int alen, uchar * buffer,
+	      int len)
+{
+	u32 op_status = TSI108_I2C_PARAM_ERR;
+
+	/* Check for valid I2C address */
+	if (chip_addr <= 0x7F && (byte_addr + len) <= (0x01 << (alen * 8))) {
+		while (len--) {
+			op_status =
+			    i2c_write_byte (chip_addr, byte_addr++, buffer++);
+
+			if (TSI108_I2C_SUCCESS != op_status) {
+				DPRINT (("I2C write_byte() failed: 0x%02x (%d left)\n", op_status, len));
+
+				break;
+			}
+		}
+	}
+
+	return op_status;
+}
+
+/*
+ * I2C interface function as defined in "include/i2c.h".
+ * Probe the given I2C chip address by reading single byte from offset 0.
+ * Returns 0 if a chip responded, not 0 on failure.
+ */
+
+int i2c_probe (uchar chip)
+{
+	u32 tmp;
+
+	/*
+	 * Try to read the first location of the chip.
+	 * The Tsi108 HW doesn't support sending just the chip address
+	 * and checkong for an <ACK> back.
+	 */
+	return i2c_read (chip, 0, 1, (char *)&tmp, 1);
+}
+
+#endif	/* (CONFIG_COMMANDS & CFG_CMD_I2C) */
+#endif /* CONFIG_TSI108_I2C */
diff --git a/drivers/tsi108_pci.c b/drivers/tsi108_pci.c
new file mode 100644
index 0000000..9f606df
--- /dev/null
+++ b/drivers/tsi108_pci.c
@@ -0,0 +1,178 @@
+/*
+ * (C) Copyright 2004 Tundra Semiconductor Corp.
+ * Alex Bounine <alexandreb@tundra.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * PCI initialisation for the Tsi108 EMU board.
+ */
+
+#include <config.h>
+
+#ifdef CONFIG_TSI108_PCI
+
+#include <common.h>
+#include <pci.h>
+#include <asm/io.h>
+#include <tsi108.h>
+
+struct pci_controller local_hose;
+
+void tsi108_clear_pci_error (void)
+{
+	u32 err_stat, err_addr, pci_stat;
+
+	/*
+	 * Quietly clear errors signalled as result of PCI/X configuration read
+	 * requests.
+	 */
+	/* Read PB Error Log Registers */
+	err_stat = *(volatile u32 *)(CFG_TSI108_CSR_BASE +
+				     TSI108_PB_REG_OFFSET + PB_ERRCS);
+	err_addr = *(volatile u32 *)(CFG_TSI108_CSR_BASE +
+				     TSI108_PB_REG_OFFSET + PB_AERR);
+	if (err_stat & PB_ERRCS_ES) {
+		/* Clear PCI/X bus errors if applicable */
+		if ((err_addr & 0xFF000000) == CFG_PCI_CFG_BASE) {
+			/* Clear error flag */
+			*(u32 *) (CFG_TSI108_CSR_BASE +
+				  TSI108_PB_REG_OFFSET + PB_ERRCS) =
+			    PB_ERRCS_ES;
+
+			/* Clear read error reported in PB_ISR */
+			*(u32 *) (CFG_TSI108_CSR_BASE +
+				  TSI108_PB_REG_OFFSET + PB_ISR) =
+			    PB_ISR_PBS_RD_ERR;
+
+		/* Clear errors reported by PCI CSR (Normally Master Abort) */
+			pci_stat = *(volatile u32 *)(CFG_TSI108_CSR_BASE +
+						     TSI108_PCI_REG_OFFSET +
+						     PCI_CSR);
+			*(volatile u32 *)(CFG_TSI108_CSR_BASE +
+					  TSI108_PCI_REG_OFFSET + PCI_CSR) =
+			    pci_stat;
+
+			*(volatile u32 *)(CFG_TSI108_CSR_BASE +
+					  TSI108_PCI_REG_OFFSET +
+					  PCI_IRP_STAT) = PCI_IRP_STAT_P_CSR;
+		}
+	}
+
+	return;
+}
+
+unsigned int __get_pci_config_dword (u32 addr)
+{
+	unsigned int retval;
+
+	__asm__ __volatile__ ("       lwbrx %0,0,%1\n"
+			     "1:     eieio\n"
+			     "2:\n"
+			     ".section .fixup,\"ax\"\n"
+			     "3:     li %0,-1\n"
+			     "       b 2b\n"
+			     ".section __ex_table,\"a\"\n"
+			     "       .align 2\n"
+			     "       .long 1b,3b\n"
+			     ".text":"=r"(retval):"r"(addr));
+
+	return (retval);
+}
+
+static int tsi108_read_config_dword (struct pci_controller *hose,
+				    pci_dev_t dev, int offset, u32 * value)
+{
+	dev &= (CFG_PCI_CFG_SIZE - 1);
+	dev |= (CFG_PCI_CFG_BASE | (offset & 0xfc));
+	*value = __get_pci_config_dword(dev);
+	if (0xFFFFFFFF == *value)
+		tsi108_clear_pci_error ();
+	return 0;
+}
+
+static int tsi108_write_config_dword (struct pci_controller *hose,
+				     pci_dev_t dev, int offset, u32 value)
+{
+	dev &= (CFG_PCI_CFG_SIZE - 1);
+	dev |= (CFG_PCI_CFG_BASE | (offset & 0xfc));
+
+	out_le32 ((volatile unsigned *)dev, value);
+
+	return 0;
+}
+
+void pci_init_board (void)
+{
+	struct pci_controller *hose = (struct pci_controller *)&local_hose;
+
+	hose->first_busno = 0;
+	hose->last_busno = 0xff;
+
+	pci_set_region (hose->regions + 0,
+		       CFG_PCI_MEMORY_BUS,
+		       CFG_PCI_MEMORY_PHYS,
+		       CFG_PCI_MEMORY_SIZE, PCI_REGION_MEM | PCI_REGION_MEMORY);
+
+	/* PCI memory space */
+	pci_set_region (hose->regions + 1,
+		       CFG_PCI_MEM_BUS,
+		       CFG_PCI_MEM_PHYS, CFG_PCI_MEM_SIZE, PCI_REGION_MEM);
+
+	/* PCI I/O space */
+	pci_set_region (hose->regions + 2,
+		       CFG_PCI_IO_BUS,
+		       CFG_PCI_IO_PHYS, CFG_PCI_IO_SIZE, PCI_REGION_IO);
+
+	hose->region_count = 3;
+
+	pci_set_ops (hose,
+		    pci_hose_read_config_byte_via_dword,
+		    pci_hose_read_config_word_via_dword,
+		    tsi108_read_config_dword,
+		    pci_hose_write_config_byte_via_dword,
+		    pci_hose_write_config_word_via_dword,
+		    tsi108_write_config_dword);
+
+	pci_register_hose (hose);
+
+	hose->last_busno = pci_hose_scan (hose);
+
+	debug ("Done PCI initialization\n");
+	return;
+}
+
+#ifdef CONFIG_OF_FLAT_TREE
+void
+ft_pci_setup (void *blob, bd_t *bd)
+{
+	u32 *p;
+	int len;
+
+	p = (u32 *)ft_get_prop (blob, "/" OF_TSI "/pci@1000/bus-range", &len);
+	if (p != NULL) {
+		p[0] = local_hose.first_busno;
+		p[1] = local_hose.last_busno;
+	}
+
+}
+#endif
+
+#endif	/* CONFIG_TSI108_PCI */
diff --git a/include/74xx_7xx.h b/include/74xx_7xx.h
index 33e396a..ba73bae 100644
--- a/include/74xx_7xx.h
+++ b/include/74xx_7xx.h
@@ -111,7 +111,7 @@ typedef enum __cpu_t {
 	CPU_750CX, CPU_750FX, CPU_750GX,
 	CPU_7400,
 	CPU_7410,
-	CPU_7448,
+	CPU_7447A, CPU_7448,
 	CPU_7450, CPU_7455, CPU_7457,
 	CPU_UNKNOWN} cpu_t;
 
diff --git a/include/asm-ppc/global_data.h b/include/asm-ppc/global_data.h
index c113b7e..26bc875 100644
--- a/include/asm-ppc/global_data.h
+++ b/include/asm-ppc/global_data.h
@@ -49,6 +49,9 @@ typedef	struct	global_data {
 	unsigned long	scc_clk;
 	unsigned long	brg_clk;
 #endif
+#if defined(CONFIG_MPC7448HPC2)
+	unsigned long   mem_clk;
+#endif
 #if defined(CONFIG_MPC83XX)
 	/* There are other clocks in the MPC83XX */
 	u32 csb_clk;
diff --git a/include/configs/mpc7448hpc2.h b/include/configs/mpc7448hpc2.h
new file mode 100644
index 0000000..243a3f6
--- /dev/null
+++ b/include/configs/mpc7448hpc2.h
@@ -0,0 +1,411 @@
+/*
+ * Copyright (c) 2005 Freescale Semiconductor, Inc.
+ *
+ * (C) Copyright 2006
+ * Alex Bounine , Tundra Semiconductor Corp.
+ * Roy Zang	, <tie-fei.zang@freescale.com> Freescale Corp.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * board specific configuration options for Freescale
+ * MPC7448HPC2 (High-Performance Computing II) (Taiga) board
+ *
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#undef DEBUG
+
+/* Board Configuration Definitions */
+/* MPC7448HPC2 (High-Performance Computing II) (Taiga) board */
+
+#define CONFIG_MPC7448HPC2
+
+#define CONFIG_74xx
+#define CONFIG_750FX		/* this option to enable init of extended BATs */
+#define CONFIG_ALTIVEC		/* undef to disable */
+
+#define CFG_BOARD_NAME		"MPC7448 HPC II"
+#define CONFIG_IDENT_STRING	" Freescale MPC7448 HPC II"
+
+#define CFG_OCN_CLK		133000000	/* 133 MHz */
+#define CFG_CONFIG_BUS_CLK	133000000
+
+#define CFG_CLK_SPREAD		/* Enable Spread-Spectrum Clock generation */
+
+#undef  CONFIG_ECC		/* disable ECC support */
+
+/* Board-specific Initialization Functions to be called */
+#define CFG_BOARD_ASM_INIT
+#define CONFIG_BOARD_EARLY_INIT_F
+#define CONFIG_BOARD_EARLY_INIT_R
+#define CONFIG_MISC_INIT_R
+
+#define CONFIG_HAS_ETH1
+
+#define CONFIG_ENV_OVERWRITE
+
+/*
+ * High Level Configuration Options
+ * (easy to change)
+ */
+
+#define CONFIG_BAUDRATE		115200	/* console baudrate = 115000 */
+
+/*#define CFG_HUSH_PARSER */
+#undef CFG_HUSH_PARSER
+
+#define CFG_PROMPT_HUSH_PS2	"> "
+
+/* Pass open firmware flat tree */
+#define CONFIG_OF_FLAT_TREE	1
+#define CONFIG_OF_BOARD_SETUP	1
+
+/* maximum size of the flat tree (8K) */
+#define OF_FLAT_TREE_MAX_SIZE	8192
+
+#define OF_CPU			"PowerPC,7448@0"
+#define OF_TSI			"tsi108@c0000000"
+#define OF_TBCLK		(bd->bi_busfreq / 8)
+#define OF_STDOUT_PATH		"/tsi108@c0000000/serial@7808"
+
+/*
+ * The following defines let you select what serial you want to use
+ * for your console driver.
+ *
+ * what to do:
+ * If you have hacked a serial cable onto the second DUART channel,
+ * change the CFG_DUART port from 1 to 0 below.
+ *
+ */
+
+#define CONFIG_CONS_INDEX	1
+#define CFG_NS16550
+#define CFG_NS16550_SERIAL
+#define CFG_NS16550_REG_SIZE	1
+#define CFG_NS16550_CLK		CFG_OCN_CLK * 8
+
+#define CFG_NS16550_COM1	(CFG_TSI108_CSR_RST_BASE+0x7808)
+#define CFG_NS16550_COM2	(CFG_TSI108_CSR_RST_BASE+0x7C08)
+#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+
+#define CONFIG_BOOTDELAY	3	/* autoboot after 3 seconds */
+#define CONFIG_ZERO_BOOTDELAY_CHECK
+
+#undef CONFIG_BOOTARGS
+/* #define CONFIG_PREBOOT  "echo;echo Type \"run flash_nfs\"
+ * to mount root filesystem over NFS;echo" */
+
+#if (CONFIG_BOOTDELAY >= 0)
+#define CONFIG_BOOTCOMMAND	"tftpboot 0x400000 zImage.initrd.elf;\
+ setenv bootargs $(bootargs) $(bootargs_root) nfsroot=$(serverip):$(rootpath) \
+ ip=$(ipaddr):$(serverip)$(bootargs_end);  bootm 0x400000; "
+
+#define CONFIG_BOOTARGS "console=ttyS0,115200"
+#endif
+
+#undef CONFIG_EXTRA_ENV_SETTINGS
+
+#define CONFIG_SERIAL	"No. 1"
+
+/* Networking Configuration */
+
+#define KSEG1ADDR(a)	(a)	/* Needed by the rtl8139 driver */
+
+#define CONFIG_TSI108_ETH
+#define CONFIG_TSI108_ETH_NUM_PORTS	2
+
+#define CONFIG_NET_MULTI
+
+#define CONFIG_BOOTFILE		zImage.initrd.elf
+#define CONFIG_LOADADDR		0x400000
+
+/*-------------------------------------------------------------------------- */
+
+#define CONFIG_LOADS_ECHO	0	/* echo off for serial download */
+#define CFG_LOADS_BAUD_CHANGE	/* allow baudrate changes */
+
+#undef CONFIG_WATCHDOG		/* watchdog disabled */
+
+#define CONFIG_BOOTP_MASK	(CONFIG_BOOTP_DEFAULT | \
+				CONFIG_BOOTP_BOOTFILESIZE)
+
+#define CONFIG_COMMANDS (CONFIG_CMD_DFL \
+		| CFG_CMD_ASKENV \
+		| CFG_CMD_CACHE \
+		| CFG_CMD_PCI \
+		| CFG_CMD_I2C \
+		| CFG_CMD_SDRAM \
+		| CFG_CMD_EEPROM \
+		| CFG_CMD_FLASH \
+		| CFG_CMD_ENV \
+		| CFG_CMD_BSP \
+		| CFG_CMD_DHCP \
+		| CFG_CMD_PING \
+		| CFG_CMD_DATE)
+
+/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
+#include <cmd_confdefs.h>
+
+/*set date in u-boot*/
+#define CONFIG_RTC_M48T35A
+#define CFG_NVRAM_BASE_ADDR	0xfc000000
+#define CFG_NVRAM_SIZE		0x8000
+/*
+ * Miscellaneous configurable options
+ */
+#define CONFIG_VERSION_VARIABLE		1
+#define CONFIG_TSI108_I2C
+
+#define CFG_I2C_EEPROM_ADDR		0x50	/* I2C EEPROM page 1 */
+#define CFG_I2C_EEPROM_ADDR_LEN		1	/* Bytes of address */
+
+#define CFG_LONGHELP		/* undef to save memory */
+#define CFG_PROMPT	"=> "	/* Monitor Command Prompt */
+
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CBSIZE		1024	/* Console I/O Buffer Size */
+#define CONFIG_KGDB_BAUDRATE	115200	/* speed to run kgdb serial port at */
+#else
+#define CFG_CBSIZE		256	/* Console I/O Buffer Size */
+#endif
+
+#define CFG_PBSIZE (CFG_CBSIZE + sizeof(CFG_PROMPT) + 16)/* Print Buffer Size */
+#define CFG_MAXARGS	16		/* max number of command args */
+#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size */
+
+#define CFG_MEMTEST_START	0x00400000	/* memtest works on */
+#define CFG_MEMTEST_END		0x07c00000	/* 4 ... 124 MB in DRAM */
+
+#define CFG_LOAD_ADDR	0x00400000	/* default load address */
+
+#define CFG_HZ		1000		/* decr freq: 1ms ticks */
+
+/*
+ * Low Level Configuration Settings
+ * (address mappings, register initial values, etc.)
+ * You should know what you are doing if you make changes here.
+ */
+
+/*-----------------------------------------------------------------------
+ * Definitions for initial stack pointer and data area
+ */
+
+/*
+ * When locking data in cache you should point the CFG_INIT_RAM_ADDRESS
+ * To an unused memory region. The stack will remain in cache until RAM
+ * is initialized
+ */
+#undef  CFG_INIT_RAM_LOCK
+#define CFG_INIT_RAM_ADDR	0x07d00000	/* unused memory region */
+#define CFG_INIT_RAM_END	0x4000/* larger space - we have SDRAM initialized */
+
+#define CFG_GBL_DATA_SIZE	128/* size in bytes reserved for init data */
+#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+
+/*-----------------------------------------------------------------------
+ * Start addresses for the final memory configuration
+ * (Set up by the startup code)
+ * Please note that CFG_SDRAM_BASE _must_ start at 0
+ */
+
+#define CFG_SDRAM_BASE		0x00000000	/* first 256 MB of SDRAM */
+#define CFG_SDRAM1_BASE		0x10000000	/* next 256MB of SDRAM */
+
+#define CFG_SDRAM2_BASE	0x40000000	/* beginning of non-cacheable alias for SDRAM - first 256MB */
+#define CFG_SDRAM3_BASE	0x50000000	/* next Non-Cacheable 256MB of SDRAM */
+
+#define CFG_PCI_PFM_BASE	0x80000000	/* Prefetchable (cacheable) PCI/X PFM and SDRAM OCN (128MB+128MB) */
+
+#define CFG_PCI_MEM32_BASE	0xE0000000	/* Non-Cacheable PCI/X MEM and SDRAM OCN (128MB+128MB) */
+
+#define CFG_MISC_REGION_BASE	0xf0000000	/* Base Address for (PCI/X + Flash) region */
+
+#define CFG_FLASH_BASE	0xff000000	/* Base Address of Flash device */
+#define CFG_FLASH_BASE2	0xfe000000	/* Alternate Flash Base Address */
+
+#define CONFIG_VERY_BIG_RAM	/* we will use up to 256M memory for cause we are short of BATS */
+
+#define PCI0_IO_BASE_BOOTM	0xfd000000
+
+#define CFG_RESET_ADDRESS	0x3fffff00
+#define CFG_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor */
+#define CFG_MONITOR_BASE	TEXT_BASE	/* u-boot code base */
+#define CFG_MALLOC_LEN		(256 << 10)	/* Reserve 256 kB for malloc */
+
+/* Peripheral Device section */
+
+/*
+ * Resources on the Tsi108
+ */
+
+#define CFG_TSI108_CSR_RST_BASE	0xC0000000	/* Tsi108 CSR base after reset */
+#define CFG_TSI108_CSR_BASE	CFG_TSI108_CSR_RST_BASE	/* Runtime Tsi108 CSR base */
+
+#define ENABLE_PCI_CSR_BAR	/* enables access to Tsi108 CSRs from the PCI/X bus */
+
+#undef  DISABLE_PBM
+
+/*
+ * PCI stuff
+ *
+ */
+
+#define CONFIG_PCI		/* include pci support */
+#define CONFIG_TSI108_PCI	/* include tsi108 pci support */
+
+#define PCI_HOST_ADAPTER	0	/* configure as pci adapter */
+#define PCI_HOST_FORCE		1	/* configure as pci host */
+#define PCI_HOST_AUTO		2	/* detected via arbiter enable */
+
+#define CONFIG_PCI_HOST PCI_HOST_FORCE	/* select pci host function */
+#define CONFIG_PCI_PNP		/* do pci plug-and-play */
+
+/* PCI MEMORY MAP section */
+
+/* PCI view of System Memory */
+#define CFG_PCI_MEMORY_BUS	0x00000000
+#define CFG_PCI_MEMORY_PHYS	0x00000000
+#define CFG_PCI_MEMORY_SIZE	0x80000000
+
+/* PCI Memory Space */
+#define CFG_PCI_MEM_BUS		(CFG_PCI_MEM_PHYS)
+#define CFG_PCI_MEM_PHYS	(CFG_PCI_MEM32_BASE)	/* 0xE0000000 */
+#define CFG_PCI_MEM_SIZE	0x10000000	/* 256 MB space for PCI/X Mem + SDRAM OCN */
+
+/* PCI I/O Space */
+#define CFG_PCI_IO_BUS		0x00000000
+#define CFG_PCI_IO_PHYS		0xfa000000	/* Changed from fd000000 */
+
+#define CFG_PCI_IO_SIZE		0x01000000	/* 16MB */
+
+#define _IO_BASE		0x00000000	/* points to PCI I/O space      */
+
+/* PCI Config Space mapping */
+#define CFG_PCI_CFG_BASE	0xfb000000	/* Changed from FE000000 */
+#define CFG_PCI_CFG_SIZE	0x01000000	/* 16MB */
+
+#define CFG_IBAT0U	0xFE0003FF
+#define CFG_IBAT0L	0xFE000002
+
+#define CFG_IBAT1U	0x00007FFF
+#define CFG_IBAT1L	0x00000012
+
+#define CFG_IBAT2U	0x80007FFF
+#define CFG_IBAT2L	0x80000022
+
+#define CFG_IBAT3U	0x00000000
+#define CFG_IBAT3L	0x00000000
+
+#define CFG_IBAT4U	0x00000000
+#define CFG_IBAT4L	0x00000000
+
+#define CFG_IBAT5U	0x00000000
+#define CFG_IBAT5L	0x00000000
+
+#define CFG_IBAT6U	0x00000000
+#define CFG_IBAT6L	0x00000000
+
+#define CFG_IBAT7U	0x00000000
+#define CFG_IBAT7L	0x00000000
+
+#define CFG_DBAT0U	0xE0003FFF
+#define CFG_DBAT0L	0xE000002A
+
+#define CFG_DBAT1U	0x00007FFF
+#define CFG_DBAT1L	0x00000012
+
+#define CFG_DBAT2U	0x00000000
+#define CFG_DBAT2L	0x00000000
+
+#define CFG_DBAT3U	0xC0000003
+#define CFG_DBAT3L	0xC000002A
+
+#define CFG_DBAT4U	0x00000000
+#define CFG_DBAT4L	0x00000000
+
+#define CFG_DBAT5U	0x00000000
+#define CFG_DBAT5L	0x00000000
+
+#define CFG_DBAT6U	0x00000000
+#define CFG_DBAT6L	0x00000000
+
+#define CFG_DBAT7U	0x00000000
+#define CFG_DBAT7L	0x00000000
+
+/* I2C addresses for the two DIMM SPD chips */
+#define DIMM0_I2C_ADDR	0x51
+#define DIMM1_I2C_ADDR	0x52
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CFG_BOOTMAPSZ	(8<<20)	/* Initial Memory map for Linux */
+
+/*-----------------------------------------------------------------------
+ * FLASH organization
+ */
+#define CFG_MAX_FLASH_BANKS	1/* Flash can be at one of two addresses */
+#define FLASH_BANK_SIZE		0x01000000	/* 16 MB Total */
+#define CFG_FLASH_BANKS_LIST {CFG_FLASH_BASE, CFG_FLASH_BASE2}
+
+#define CFG_FLASH_CFI_DRIVER
+#define CFG_FLASH_CFI
+#define CFG_WRITE_SWAPPED_DATA
+
+#define PHYS_FLASH_SIZE		0x01000000
+#define CFG_MAX_FLASH_SECT	(128)
+
+#define CFG_ENV_IS_IN_NVRAM
+#define CFG_ENV_ADDR		0xFC000000
+
+#define CFG_ENV_OFFSET	0x00000000	/* Offset of Environment Sector */
+#define CFG_ENV_SIZE	0x00000400	/* Total Size of Environment Space */
+
+/*-----------------------------------------------------------------------
+ * Cache Configuration
+ */
+#define CFG_CACHELINE_SIZE	32	/* For all MPC74xx CPUs */
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value */
+#endif
+
+/*-----------------------------------------------------------------------
+ * L2CR setup -- make sure this is right for your board!
+ * look in include/mpc74xx.h for the defines used here
+ */
+#undef CFG_L2
+
+#define L2_INIT		0
+#define L2_ENABLE	(L2_INIT | L2CR_L2E)
+
+/*
+ * Internal Definitions
+ *
+ * Boot Flags
+ */
+#define BOOTFLAG_COLD	0x01	/* Normal Power-On: Boot from FLASH */
+#define BOOTFLAG_WARM	0x02	/* Software reboot */
+#define CFG_SERIAL_HANG_IN_EXCEPTION
+#endif	/* __CONFIG_H */
diff --git a/include/tsi108.h b/include/tsi108.h
new file mode 100644
index 0000000..ba62e7a
--- /dev/null
+++ b/include/tsi108.h
@@ -0,0 +1,221 @@
+/*****************************************************************************
+ * (C) Copyright 2003;  Tundra Semiconductor Corp.
+ * (C) Copyright 2006;  Freescale Semiconductor Corp.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *****************************************************************************/
+
+/*
+ * FILENAME: tsi108.h
+ *
+ * Originator: Alex Bounine
+ *
+ * DESCRIPTION:
+ * Common definitions for the Tundra Tsi108 bridge chip
+ *
+ */
+
+#ifndef _TSI108_H_
+#define _TSI108_H_
+
+#define TSI108_HLP_REG_OFFSET	(0x0000)
+#define TSI108_PCI_REG_OFFSET	(0x1000)
+#define TSI108_CLK_REG_OFFSET	(0x2000)
+#define TSI108_PB_REG_OFFSET	(0x3000)
+#define TSI108_SD_REG_OFFSET	(0x4000)
+#define TSI108_MPIC_REG_OFFSET	(0x7400)
+
+#define PB_ID			(0x000)
+#define PB_RSR			(0x004)
+#define PB_BUS_MS_SELECT	(0x008)
+#define PB_ISR			(0x00C)
+#define PB_ARB_CTRL		(0x018)
+#define PB_PVT_CTRL2		(0x034)
+#define PB_SCR			(0x400)
+#define PB_ERRCS		(0x404)
+#define PB_AERR			(0x408)
+#define PB_REG_BAR		(0x410)
+#define PB_OCN_BAR1		(0x414)
+#define PB_OCN_BAR2		(0x418)
+#define PB_SDRAM_BAR1		(0x41C)
+#define PB_SDRAM_BAR2		(0x420)
+#define PB_MCR			(0xC00)
+#define PB_MCMD			(0xC04)
+
+#define HLP_B0_ADDR		(0x000)
+#define HLP_B1_ADDR		(0x010)
+#define HLP_B2_ADDR		(0x020)
+#define HLP_B3_ADDR		(0x030)
+
+#define HLP_B0_MASK		(0x004)
+#define HLP_B1_MASK		(0x014)
+#define HLP_B2_MASK		(0x024)
+#define HLP_B3_MASK		(0x034)
+
+#define HLP_B0_CTRL0		(0x008)
+#define HLP_B1_CTRL0		(0x018)
+#define HLP_B2_CTRL0		(0x028)
+#define HLP_B3_CTRL0		(0x038)
+
+#define HLP_B0_CTRL1		(0x00C)
+#define HLP_B1_CTRL1		(0x01C)
+#define HLP_B2_CTRL1		(0x02C)
+#define HLP_B3_CTRL1		(0x03C)
+
+#define PCI_CSR			(0x004)
+#define PCI_P2O_BAR0		(0x010)
+#define PCI_P2O_BAR0_UPPER	(0x014)
+#define PCI_P2O_BAR2		(0x018)
+#define PCI_P2O_BAR2_UPPER	(0x01C)
+#define PCI_P2O_BAR3		(0x020)
+#define PCI_P2O_BAR3_UPPER	(0x024)
+
+#define PCI_MISC_CSR		(0x040)
+#define PCI_P2O_PAGE_SIZES	(0x04C)
+
+#define PCI_PCIX_STAT		(0x0F4)
+
+#define PCI_IRP_STAT		(0x184)
+
+#define PCI_PFAB_BAR0		(0x204)
+#define PCI_PFAB_BAR0_UPPER	(0x208)
+#define PCI_PFAB_IO		(0x20C)
+#define PCI_PFAB_IO_UPPER	(0x210)
+
+#define PCI_PFAB_MEM32		(0x214)
+#define PCI_PFAB_MEM32_REMAP	(0x218)
+#define PCI_PFAB_MEM32_MASK	(0x21C)
+
+#define CG_PLL0_CTRL0		(0x210)
+#define CG_PLL0_CTRL1		(0x214)
+#define CG_PLL1_CTRL0		(0x220)
+#define CG_PLL1_CTRL1		(0x224)
+#define CG_PWRUP_STATUS		(0x234)
+
+#define MPIC_CSR(n) (0x30C + (n * 0x40))
+
+#define SD_CTRL			(0x000)
+#define SD_STATUS		(0x004)
+#define SD_TIMING		(0x008)
+#define SD_REFRESH		(0x00C)
+#define SD_INT_STATUS		(0x010)
+#define SD_INT_ENABLE		(0x014)
+#define SD_INT_SET		(0x018)
+#define SD_D0_CTRL		(0x020)
+#define SD_D1_CTRL		(0x024)
+#define SD_D0_BAR		(0x028)
+#define SD_D1_BAR		(0x02C)
+#define SD_ECC_CTRL		(0x040)
+#define SD_DLL_STATUS		(0x250)
+
+#define TS_SD_CTRL_ENABLE	(1 << 31)
+
+#define PB_ERRCS_ES		(1 << 1)
+#define PB_ISR_PBS_RD_ERR	(1 << 8)
+#define PCI_IRP_STAT_P_CSR	(1 << 23)
+
+/*
+ * I2C : Register address offset definitions
+ */
+#define I2C_CNTRL1		(0x00000000)
+#define I2C_CNTRL2		(0x00000004)
+#define I2C_RD_DATA		(0x00000008)
+#define I2C_TX_DATA		(0x0000000c)
+
+/*
+ * I2C : Register Bit Masks and Reset Values
+ * definitions for every register
+ */
+
+/* I2C_CNTRL1 : Reset Value */
+#define I2C_CNTRL1_RESET_VALUE				(0x0000000a)
+
+/* I2C_CNTRL1 : Register Bits Masks Definitions */
+#define I2C_CNTRL1_DEVCODE				(0x0000000f)
+#define I2C_CNTRL1_PAGE					(0x00000700)
+#define I2C_CNTRL1_BYTADDR				(0x00ff0000)
+#define I2C_CNTRL1_I2CWRITE				(0x01000000)
+
+/* I2C_CNTRL1 : Read/Write Bit Mask Definition */
+#define I2C_CNTRL1_RWMASK				(0x01ff070f)
+
+/* I2C_CNTRL1 : Unused/Reserved bits Definition */
+#define I2C_CNTRL1_RESERVED				(0xfe00f8f0)
+
+/* I2C_CNTRL2 : Reset Value */
+#define I2C_CNTRL2_RESET_VALUE				(0x00000000)
+
+/* I2C_CNTRL2 : Register Bits Masks Definitions */
+#define I2C_CNTRL2_SIZE					(0x00000003)
+#define I2C_CNTRL2_LANE					(0x0000000c)
+#define I2C_CNTRL2_MULTIBYTE				(0x00000010)
+#define I2C_CNTRL2_START				(0x00000100)
+#define I2C_CNTRL2_WR_STATUS				(0x00010000)
+#define I2C_CNTRL2_RD_STATUS				(0x00020000)
+#define I2C_CNTRL2_I2C_TO_ERR				(0x04000000)
+#define I2C_CNTRL2_I2C_CFGERR				(0x08000000)
+#define I2C_CNTRL2_I2C_CMPLT				(0x10000000)
+
+/* I2C_CNTRL2 : Read/Write Bit Mask Definition */
+#define I2C_CNTRL2_RWMASK				(0x0000011f)
+
+/* I2C_CNTRL2 : Unused/Reserved bits Definition */
+#define I2C_CNTRL2_RESERVED				(0xe3fcfee0)
+
+/* I2C_RD_DATA : Reset Value */
+#define I2C_RD_DATA_RESET_VALUE				(0x00000000)
+
+/* I2C_RD_DATA : Register Bits Masks Definitions */
+#define I2C_RD_DATA_RBYTE0				(0x000000ff)
+#define I2C_RD_DATA_RBYTE1				(0x0000ff00)
+#define I2C_RD_DATA_RBYTE2				(0x00ff0000)
+#define I2C_RD_DATA_RBYTE3				(0xff000000)
+
+/* I2C_RD_DATA : Read/Write Bit Mask Definition */
+#define I2C_RD_DATA_RWMASK				(0x00000000)
+
+/* I2C_RD_DATA : Unused/Reserved bits Definition */
+#define I2C_RD_DATA_RESERVED				(0x00000000)
+
+/* I2C_TX_DATA : Reset Value */
+#define I2C_TX_DATA_RESET_VALUE				(0x00000000)
+
+/* I2C_TX_DATA : Register Bits Masks Definitions */
+#define I2C_TX_DATA_TBYTE0				(0x000000ff)
+#define I2C_TX_DATA_TBYTE1				(0x0000ff00)
+#define I2C_TX_DATA_TBYTE2				(0x00ff0000)
+#define I2C_TX_DATA_TBYTE3				(0xff000000)
+
+/* I2C_TX_DATA : Read/Write Bit Mask Definition */
+#define I2C_TX_DATA_RWMASK				(0xffffffff)
+
+/* I2C_TX_DATA : Unused/Reserved bits Definition */
+#define I2C_TX_DATA_RESERVED				(0x00000000)
+
+#define TSI108_I2C_OFFSET	0x7000	/* offset for general use I2C channel */
+#define TSI108_I2C_SDRAM_OFFSET	0x4400	/* offset for SPD I2C channel */
+
+#define I2C_EEPROM_DEVCODE	0xA	/* standard I2C EEPROM device code */
+
+/* I2C status codes */
+
+#define TSI108_I2C_SUCCESS	0
+#define TSI108_I2C_PARAM_ERR	1
+#define TSI108_I2C_TIMEOUT_ERR	2
+#define TSI108_I2C_IF_BUSY	3
+#define TSI108_I2C_IF_ERROR	4
+
+#endif		/* _TSI108_H_ */
diff --git a/lib_ppc/extable.c b/lib_ppc/extable.c
index d92f142..fe856ff 100644
--- a/lib_ppc/extable.c
+++ b/lib_ppc/extable.c
@@ -37,6 +37,8 @@
  * on our cache or tlb entries.
  */
 
+DECLARE_GLOBAL_DATA_PTR;
+
 struct exception_table_entry
 {
 	unsigned long insn, fixup;
@@ -55,10 +57,22 @@ search_one_table(const struct exception_table_entry *first,
 		long diff;
 
 		mid = (last - first) / 2 + first;
-		diff = mid->insn - value;
-		if (diff == 0)
-			return mid->fixup;
-		else if (diff < 0)
+		if (mid > CFG_MONITOR_BASE) {
+		/* exception occurs in FLASH, before u-boot relocation.
+		 * No relocation offset is needed.
+		 */
+			diff = mid->insn - value;
+			if (diff == 0)
+				return mid->fixup;
+		} else {
+		/* exception occurs in RAM, after u-boot relocation.
+		 * A relocation offset should be added.
+		 */
+			diff = (mid->insn + gd->reloc_off) - value;
+			if (diff == 0)
+				return (mid->fixup + gd->reloc_off);
+		}
+		if (diff < 0)
 			first = mid+1;
 		else
 			last = mid-1;
@@ -75,8 +89,11 @@ search_exception_table(unsigned long addr)
 
 	/* There is only the kernel to search.  */
 	ret = search_one_table(__start___ex_table, __stop___ex_table-1, addr);
+	/* if the serial port does not hang in exception, printf can be used */
+#if !defined(CFG_SERIAL_HANG_IN_EXCEPTION)
 	if (ex_tab_message)
 		printf("Bus Fault @ 0x%08lx, fixup 0x%08lx\n", addr, ret);
+#endif
 	if (ret) return ret;
 
 	return 0;
diff --git a/net/eth.c b/net/eth.c
index b3e281f..0fc2211 100644
--- a/net/eth.c
+++ b/net/eth.c
@@ -52,6 +52,7 @@ extern int rtl8139_initialize(bd_t*);
 extern int rtl8169_initialize(bd_t*);
 extern int scc_initialize(bd_t*);
 extern int skge_initialize(bd_t*);
+extern int tsi108_eth_initialize(bd_t*);
 extern int tsec_initialize(bd_t*, int, char *);
 extern int npe_initialize(bd_t *);
 extern int uec_initialize(int);
@@ -251,6 +252,9 @@ int eth_initialize(bd_t *bis)
 #ifdef CONFIG_NS8382X
 	ns8382x_initialize(bis);
 #endif
+#if defined(CONFIG_TSI108_ETH)
+	tsi108_eth_initialize(bis);
+#endif
 #if defined(CONFIG_RTL8139)
 	rtl8139_initialize(bis);
 #endif