Merge branch 'master' of http://git.denx.de/u-boot-sunxi

75 files changed, 347 insertions, 342 deletions

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 506463c..3355b3b 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -643,11 +643,17 @@ config ARCH_SOCFPGA
 
 config ARCH_SUNXI
 	bool "Support sunxi (Allwinner) SoCs"
+	select CMD_USB
 	select DM
 	select DM_GPIO
+	select DM_ETH
+	select DM_SERIAL
+	select DM_USB
 	select OF_CONTROL
 	select OF_SEPARATE
 	select SPL_DISABLE_OF_CONTROL
+	select USB
+	select USB_STORAGE
 
 config TARGET_SNOWBALL
 	bool "Support snowball"
diff --git a/arch/arm/cpu/armv7/sunxi/board.c b/arch/arm/cpu/armv7/sunxi/board.c
index 5f39aa0..f01846e 100644
--- a/arch/arm/cpu/armv7/sunxi/board.c
+++ b/arch/arm/cpu/armv7/sunxi/board.c
@@ -11,6 +11,7 @@
  */
 
 #include <common.h>
+#include <mmc.h>
 #include <i2c.h>
 #include <serial.h>
 #ifdef CONFIG_SPL_BUILD
@@ -22,6 +23,7 @@
 #include <asm/arch/gpio.h>
 #include <asm/arch/sys_proto.h>
 #include <asm/arch/timer.h>
+#include <asm/arch/mmc.h>
 
 #include <linux/compiler.h>
 
@@ -121,17 +123,18 @@ void s_init(void)
 }
 
 #ifdef CONFIG_SPL_BUILD
+DECLARE_GLOBAL_DATA_PTR;
+
 /* The sunxi internal brom will try to loader external bootloader
  * from mmc0, nand flash, mmc2.
- * Unfortunately we can't check how SPL was loaded so assume
- * it's always the first SD/MMC controller
  */
 u32 spl_boot_device(void)
 {
+	struct mmc *mmc0, *mmc1;
 	/*
-	 * When booting from the SD card, the "eGON.BT0" signature is expected
-	 * to be found in memory at the address 0x0004 (see the "mksunxiboot"
-	 * tool, which generates this header).
+	 * When booting from the SD card or NAND memory, the "eGON.BT0"
+	 * signature is expected to be found in memory at the address 0x0004
+	 * (see the "mksunxiboot" tool, which generates this header).
 	 *
 	 * When booting in the FEL mode over USB, this signature is patched in
 	 * memory and replaced with something else by the 'fel' tool. This other
@@ -139,15 +142,40 @@ u32 spl_boot_device(void)
 	 * valid bootable SD card image (because the BROM would refuse to
 	 * execute the SPL in this case).
 	 *
-	 * This branch is just making a decision at runtime whether to load
-	 * the main u-boot binary from the SD card (if the "eGON.BT0" signature
-	 * is found) or return to the FEL code in the BROM to wait and receive
-	 * the main u-boot binary over USB.
+	 * This checks for the signature and if it is not found returns to
+	 * the FEL code in the BROM to wait and receive the main u-boot
+	 * binary over USB. If it is found, it determines where SPL was
+	 * read from.
 	 */
-	if (readl(4) == 0x4E4F4765 && readl(8) == 0x3054422E) /* eGON.BT0 */
-		return BOOT_DEVICE_MMC1;
-	else
+	if (readl(4) != 0x4E4F4765 || readl(8) != 0x3054422E) /* eGON.BT0 */
 		return BOOT_DEVICE_BOARD;
+
+	/* The BROM will try to boot from mmc0 first, so try that first. */
+	mmc_initialize(gd->bd);
+	mmc0 = find_mmc_device(0);
+	if (sunxi_mmc_has_egon_boot_signature(mmc0))
+		return BOOT_DEVICE_MMC1;
+
+	/* Fallback to booting NAND if enabled. */
+	if (IS_ENABLED(CONFIG_SPL_NAND_SUPPORT))
+		return BOOT_DEVICE_NAND;
+
+	if (CONFIG_MMC_SUNXI_SLOT_EXTRA == 2) {
+		mmc1 = find_mmc_device(1);
+		if (sunxi_mmc_has_egon_boot_signature(mmc1)) {
+			/*
+			 * spl_mmc.c: spl_mmc_load_image() is hard-coded to
+			 * use find_mmc_device(0), no matter what we
+			 * return. Swap mmc0 and mmc2 to make this work.
+			 */
+			mmc0->block_dev.dev = 1;
+			mmc1->block_dev.dev = 0;
+			return BOOT_DEVICE_MMC2;
+		}
+	}
+
+	panic("Could not determine boot source\n");
+	return -1;		/* Never reached */
 }
 
 /* No confirmation data available in SPL yet. Hardcode bootmode */
diff --git a/arch/arm/cpu/armv7/sunxi/usb_phy.c b/arch/arm/cpu/armv7/sunxi/usb_phy.c
index b07d67f..4d63a74 100644
--- a/arch/arm/cpu/armv7/sunxi/usb_phy.c
+++ b/arch/arm/cpu/armv7/sunxi/usb_phy.c
@@ -44,6 +44,7 @@ static struct sunxi_usb_phy {
 	int usb_rst_mask;
 	int gpio_vbus;
 	int gpio_vbus_det;
+	int gpio_id_det;
 	int id;
 	int init_count;
 	int power_on_count;
@@ -82,6 +83,14 @@ static int get_vbus_detect_gpio(int index)
 	return -EINVAL;
 }
 
+static int get_id_detect_gpio(int index)
+{
+	switch (index) {
+	case 0: return sunxi_name_to_gpio(CONFIG_USB0_ID_DET);
+	}
+	return -EINVAL;
+}
+
 static void usb_phy_write(struct sunxi_usb_phy *phy, int addr,
 			  int data, int len)
 {
@@ -228,10 +237,8 @@ int sunxi_usb_phy_vbus_detect(int index)
 	struct sunxi_usb_phy *phy = &sunxi_usb_phy[index];
 	int err, retries = 3;
 
-	if (phy->gpio_vbus_det < 0) {
-		eprintf("Error: invalid vbus detection pin\n");
+	if (phy->gpio_vbus_det < 0)
 		return phy->gpio_vbus_det;
-	}
 
 	err = gpio_get_value(phy->gpio_vbus_det);
 	/*
@@ -247,6 +254,16 @@ int sunxi_usb_phy_vbus_detect(int index)
 	return err;
 }
 
+int sunxi_usb_phy_id_detect(int index)
+{
+	struct sunxi_usb_phy *phy = &sunxi_usb_phy[index];
+
+	if (phy->gpio_id_det < 0)
+		return phy->gpio_id_det;
+
+	return gpio_get_value(phy->gpio_id_det);
+}
+
 int sunxi_usb_phy_probe(void)
 {
 	struct sunxi_ccm_reg *ccm = (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
@@ -275,6 +292,18 @@ int sunxi_usb_phy_probe(void)
 			if (ret)
 				return ret;
 		}
+
+		phy->gpio_id_det = get_id_detect_gpio(i);
+		if (phy->gpio_id_det >= 0) {
+			ret = gpio_request(phy->gpio_id_det, "usb_id_det");
+			if (ret)
+				return ret;
+			ret = gpio_direction_input(phy->gpio_id_det);
+			if (ret)
+				return ret;
+			sunxi_gpio_set_pull(phy->gpio_id_det,
+					    SUNXI_GPIO_PULL_UP);
+		}
 	}
 
 	setbits_le32(&ccm->usb_clk_cfg, CCM_USB_CTRL_PHYGATE);
@@ -298,6 +327,9 @@ int sunxi_usb_phy_remove(void)
 
 		if (phy->gpio_vbus_det >= 0)
 			gpio_free(phy->gpio_vbus_det);
+
+		if (phy->gpio_id_det >= 0)
+			gpio_free(phy->gpio_id_det);
 	}
 
 	return 0;
diff --git a/arch/arm/dts/sun5i-a13-utoo-p66.dts b/arch/arm/dts/sun5i-a13-utoo-p66.dts
index 8c1bca7..514f159 100644
--- a/arch/arm/dts/sun5i-a13-utoo-p66.dts
+++ b/arch/arm/dts/sun5i-a13-utoo-p66.dts
@@ -52,14 +52,6 @@
 	model = "Utoo P66";
 	compatible = "utoo,p66", "allwinner,sun5i-a13";
 
-	aliases {
-		serial0 = &uart1;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
 	i2c_lcd: i2c@0 {
 		/* The lcd panel i2c interface is hooked up via gpios */
 		compatible = "i2c-gpio";
@@ -227,12 +219,6 @@
 	status = "okay";
 };
 
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart1_pins_b>;
-	status = "okay";
-};
-
 &usbphy {
 	usb0_vbus-supply = <&reg_usb0_vbus>;
 	usb1_vbus-supply = <&reg_ldo3>;
diff --git a/arch/arm/dts/sun8i-a23-a33.dtsi b/arch/arm/dts/sun8i-a23-a33.dtsi
index 7abd0ae..5cd2e92 100644
--- a/arch/arm/dts/sun8i-a23-a33.dtsi
+++ b/arch/arm/dts/sun8i-a23-a33.dtsi
@@ -332,6 +332,24 @@
 			#size-cells = <0>;
 		};
 
+		ehci0: usb@01c1a000 {
+			compatible = "allwinner,sun8i-a23-ehci", "generic-ehci";
+			reg = <0x01c1a000 0x100>;
+			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ahb1_gates 26>;
+			resets = <&ahb1_rst 26>;
+			status = "disabled";
+		};
+
+		ohci0: usb@01c1a400 {
+			compatible = "allwinner,sun8i-a23-ohci", "generic-ohci";
+			reg = <0x01c1a400 0x100>;
+			interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ahb1_gates 29>, <&usb_clk 16>;
+			resets = <&ahb1_rst 29>;
+			status = "disabled";
+		};
+
 		pio: pinctrl@01c20800 {
 			/* compatible gets set in SoC specific dtsi file */
 			reg = <0x01c20800 0x400>;
diff --git a/arch/arm/dts/sun8i-a33-ga10h-v1.1.dts b/arch/arm/dts/sun8i-a33-ga10h-v1.1.dts
index 8667033..da16343 100644
--- a/arch/arm/dts/sun8i-a33-ga10h-v1.1.dts
+++ b/arch/arm/dts/sun8i-a33-ga10h-v1.1.dts
@@ -61,6 +61,10 @@
 	};
 };
 
+&ehci0 {
+	status = "okay";
+};
+
 &i2c0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2c0_pins_a>;
@@ -109,6 +113,10 @@
 	status = "okay";
 };
 
+&ohci0 {
+	status = "okay";
+};
+
 &pio {
 	mmc0_cd_pin_q8h: mmc0_cd_pin@0 {
 		allwinner,pins = "PB4";
diff --git a/arch/arm/include/asm/arch-sunxi/mmc.h b/arch/arm/include/asm/arch-sunxi/mmc.h
index cb52e64..3da360b 100644
--- a/arch/arm/include/asm/arch-sunxi/mmc.h
+++ b/arch/arm/include/asm/arch-sunxi/mmc.h
@@ -127,4 +127,5 @@ struct sunxi_mmc {
 #define SUNXI_MMC_COMMON_RESET			(1 << 18)
 
 struct mmc *sunxi_mmc_init(int sdc_no);
+int sunxi_mmc_has_egon_boot_signature(struct mmc *mmc);
 #endif /* _SUNXI_MMC_H */
diff --git a/arch/arm/include/asm/arch-sunxi/usb_phy.h b/arch/arm/include/asm/arch-sunxi/usb_phy.h
index b7b831e..17d31b8 100644
--- a/arch/arm/include/asm/arch-sunxi/usb_phy.h
+++ b/arch/arm/include/asm/arch-sunxi/usb_phy.h
@@ -17,4 +17,12 @@ void sunxi_usb_phy_exit(int index);
 void sunxi_usb_phy_power_on(int index);
 void sunxi_usb_phy_power_off(int index);
 int sunxi_usb_phy_vbus_detect(int index);
+int sunxi_usb_phy_id_detect(int index);
 void sunxi_usb_phy_enable_squelch_detect(int index, int enable);
+
+/* Not really phy related, but we have to declare this somewhere ... */
+#if defined(CONFIG_MUSB_HOST) || defined(CONFIG_MUSB_GADGET)
+void sunxi_musb_board_init(void);
+#else
+#define sunxi_musb_board_init()
+#endif
diff --git a/board/sunxi/Kconfig b/board/sunxi/Kconfig
index 2a1cd3c..441c880 100644
--- a/board/sunxi/Kconfig
+++ b/board/sunxi/Kconfig
@@ -294,6 +294,13 @@ config USB0_VBUS_DET
 	Set the Vbus detect pin for usb0 (otg). This takes a string in the
 	format understood by sunxi_name_to_gpio, e.g. PH1 for pin 1 of port H.
 
+config USB0_ID_DET
+	string "ID detect pin for usb0 (otg)"
+	default ""
+	---help---
+	Set the ID detect pin for usb0 (otg). This takes a string in the
+	format understood by sunxi_name_to_gpio, e.g. PH1 for pin 1 of port H.
+
 config USB1_VBUS_PIN
 	string "Vbus enable pin for usb1 (ehci0)"
 	default "PH6" if MACH_SUN4I || MACH_SUN7I
diff --git a/board/sunxi/board.c b/board/sunxi/board.c
index ed60e74..afed6a3 100644
--- a/board/sunxi/board.c
+++ b/board/sunxi/board.c
@@ -31,7 +31,6 @@
 #include <asm/arch/usb_phy.h>
 #include <asm/gpio.h>
 #include <asm/io.h>
-#include <linux/usb/musb.h>
 #include <net.h>
 
 #if defined CONFIG_VIDEO_LCD_PANEL_I2C && !(defined CONFIG_SPL_BUILD)
@@ -294,21 +293,19 @@ int board_mmc_init(bd_t *bis)
 		return -1;
 #endif
 
-#if CONFIG_MMC_SUNXI_SLOT == 0 && CONFIG_MMC_SUNXI_SLOT_EXTRA == 2
+#if !defined(CONFIG_SPL_BUILD) && CONFIG_MMC_SUNXI_SLOT_EXTRA == 2
 	/*
-	 * Both mmc0 and mmc2 are bootable, figure out where we're booting
-	 * from. Try mmc0 first, just like the brom does.
+	 * On systems with an emmc (mmc2), figure out if we are booting from
+	 * the emmc and if we are make it "mmc dev 0" so that boot.scr, etc.
+	 * are searched there first. Note we only do this for u-boot proper,
+	 * not for the SPL, see spl_boot_device().
 	 */
-	if (mmc_getcd(mmc0) && mmc_init(mmc0) == 0 &&
-	    mmc0->block_dev.block_read(0, 16, 1, buf) == 1) {
-		buf[12] = 0;
-		if (strcmp(&buf[4], "eGON.BT0") == 0)
-			return 0;
+	if (!sunxi_mmc_has_egon_boot_signature(mmc0) &&
+	    sunxi_mmc_has_egon_boot_signature(mmc1)) {
+		/* Booting from emmc / mmc2, swap */
+		mmc0->block_dev.dev = 1;
+		mmc1->block_dev.dev = 0;
 	}
-
-	/* no bootable card in mmc0, so we must be booting from mmc2, swap */
-	mmc0->block_dev.dev = 1;
-	mmc1->block_dev.dev = 0;
 #endif
 
 	return 0;
@@ -451,28 +448,6 @@ void sunxi_board_init(void)
 }
 #endif
 
-#if defined(CONFIG_MUSB_HOST) || defined(CONFIG_MUSB_GADGET)
-extern const struct musb_platform_ops sunxi_musb_ops;
-
-static struct musb_hdrc_config musb_config = {
-	.multipoint     = 1,
-	.dyn_fifo       = 1,
-	.num_eps        = 6,
-	.ram_bits       = 11,
-};
-
-static struct musb_hdrc_platform_data musb_plat = {
-#if defined(CONFIG_MUSB_HOST)
-	.mode           = MUSB_HOST,
-#else
-	.mode		= MUSB_PERIPHERAL,
-#endif
-	.config         = &musb_config,
-	.power          = 250,
-	.platform_ops	= &sunxi_musb_ops,
-};
-#endif
-
 #ifdef CONFIG_USB_GADGET
 int g_dnl_board_usb_cable_connected(void)
 {
@@ -535,9 +510,8 @@ int misc_init_r(void)
 	if (ret)
 		return ret;
 #endif
-#if defined(CONFIG_MUSB_HOST) || defined(CONFIG_MUSB_GADGET)
-	musb_register(&musb_plat, NULL, (void *)SUNXI_USB0_BASE);
-#endif
+	sunxi_musb_board_init();
+
 	return 0;
 }
 #endif
diff --git a/configs/A10-OLinuXino-Lime_defconfig b/configs/A10-OLinuXino-Lime_defconfig
index 87ade90..0245bfc 100644
--- a/configs/A10-OLinuXino-Lime_defconfig
+++ b/configs/A10-OLinuXino-Lime_defconfig
@@ -7,11 +7,8 @@ CONFIG_SYS_CLK_FREQ=912000000
 CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-olinuxino-lime"
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
 CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_EMAC,AHCI,SATAPWR=SUNXI_GPC(3),USB_EHCI"
+CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_EMAC,AHCI,SATAPWR=SUNXI_GPC(3)"
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set
 # CONFIG_CMD_FPGA is not set
-CONFIG_DM_ETH=y
-CONFIG_DM_SERIAL=y
-CONFIG_USB=y
-CONFIG_DM_USB=y
+CONFIG_USB_EHCI_HCD=y
diff --git a/configs/A10s-OLinuXino-M_defconfig b/configs/A10s-OLinuXino-M_defconfig
index 5a450af..7783c7d 100644
--- a/configs/A10s-OLinuXino-M_defconfig
+++ b/configs/A10s-OLinuXino-M_defconfig
@@ -9,11 +9,8 @@ CONFIG_USB1_VBUS_PIN="PB10"
 CONFIG_DEFAULT_DEVICE_TREE="sun5i-a10s-olinuxino-micro"
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
 CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="AXP152_POWER,SUNXI_EMAC,USB_EHCI"
+CONFIG_SYS_EXTRA_OPTIONS="AXP152_POWER,SUNXI_EMAC"
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set
 # CONFIG_CMD_FPGA is not set
-CONFIG_DM_ETH=y
-CONFIG_DM_SERIAL=y
-CONFIG_USB=y
-CONFIG_DM_USB=y
+CONFIG_USB_EHCI_HCD=y
diff --git a/configs/A13-OLinuXinoM_defconfig b/configs/A13-OLinuXinoM_defconfig
index 213ece6..dcaaff9 100644
--- a/configs/A13-OLinuXinoM_defconfig
+++ b/configs/A13-OLinuXinoM_defconfig
@@ -13,11 +13,8 @@ CONFIG_VIDEO_LCD_BL_PWM="PB2"
 CONFIG_DEFAULT_DEVICE_TREE="sun5i-a13-olinuxino-micro"
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
 CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=2,USB_EHCI"
+CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=2"
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set
 # CONFIG_CMD_FPGA is not set
-CONFIG_DM_ETH=y
-CONFIG_DM_SERIAL=y
-CONFIG_USB=y
-CONFIG_DM_USB=y
+CONFIG_USB_EHCI_HCD=y
diff --git a/configs/A13-OLinuXino_defconfig b/configs/A13-OLinuXino_defconfig
index d71c11c..4b43372 100644
--- a/configs/A13-OLinuXino_defconfig
+++ b/configs/A13-OLinuXino_defconfig
@@ -14,11 +14,8 @@ CONFIG_VIDEO_LCD_BL_PWM="PB2"
 CONFIG_DEFAULT_DEVICE_TREE="sun5i-a13-olinuxino"
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
 CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=2,AXP209_POWER,USB_EHCI"
+CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=2,AXP209_POWER"
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set
 # CONFIG_CMD_FPGA is not set
-CONFIG_DM_ETH=y
-CONFIG_DM_SERIAL=y
-CONFIG_USB=y
-CONFIG_DM_USB=y
+CONFIG_USB_EHCI_HCD=y
diff --git a/configs/A20-OLinuXino-Lime2_defconfig b/configs/A20-OLinuXino-Lime2_defconfig
index 6445b25..c9d0f47 100644
--- a/configs/A20-OLinuXino-Lime2_defconfig
+++ b/configs/A20-OLinuXino-Lime2_defconfig
@@ -8,12 +8,9 @@ CONFIG_USB0_VBUS_DET="PH5"
 CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-olinuxino-lime2"
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
 CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,RGMII,AHCI,SATAPWR=SUNXI_GPC(3),USB_EHCI"
+CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,RGMII,AHCI,SATAPWR=SUNXI_GPC(3)"
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set
 # CONFIG_CMD_FPGA is not set
-CONFIG_DM_ETH=y
 CONFIG_ETH_DESIGNWARE=y
-CONFIG_DM_SERIAL=y
-CONFIG_USB=y
-CONFIG_DM_USB=y
+CONFIG_USB_EHCI_HCD=y
diff --git a/configs/A20-OLinuXino-Lime_defconfig b/configs/A20-OLinuXino-Lime_defconfig
index 650670f..fb1f240 100644
--- a/configs/A20-OLinuXino-Lime_defconfig
+++ b/configs/A20-OLinuXino-Lime_defconfig
@@ -5,12 +5,9 @@ CONFIG_DRAM_CLK=480
 CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-olinuxino-lime"
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
 CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,AHCI,SATAPWR=SUNXI_GPC(3),USB_EHCI"
+CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,AHCI,SATAPWR=SUNXI_GPC(3)"
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set
 # CONFIG_CMD_FPGA is not set
-CONFIG_DM_ETH=y
 CONFIG_ETH_DESIGNWARE=y
-CONFIG_DM_SERIAL=y
-CONFIG_USB=y
-CONFIG_DM_USB=y
+CONFIG_USB_EHCI_HCD=y
diff --git a/configs/A20-OLinuXino_MICRO_defconfig b/configs/A20-OLinuXino_MICRO_defconfig
index 3f92504..a7f1395 100644
--- a/configs/A20-OLinuXino_MICRO_defconfig
+++ b/configs/A20-OLinuXino_MICRO_defconfig
@@ -9,12 +9,9 @@ CONFIG_VIDEO_VGA=y
 CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-olinuxino-micro"
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
 CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,AHCI,SATAPWR=SUNXI_GPB(8),USB_EHCI"
+CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,AHCI,SATAPWR=SUNXI_GPB(8)"
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set
 # CONFIG_CMD_FPGA is not set
-CONFIG_DM_ETH=y
 CONFIG_ETH_DESIGNWARE=y
-CONFIG_DM_SERIAL=y
-CONFIG_USB=y
-CONFIG_DM_USB=y
+CONFIG_USB_EHCI_HCD=y
diff --git a/configs/Ainol_AW1_defconfig b/configs/Ainol_AW1_defconfig
index f94cd5a..e1262e6 100644
--- a/configs/Ainol_AW1_defconfig
+++ b/configs/Ainol_AW1_defconfig
@@ -19,5 +19,3 @@ CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER"
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set
 # CONFIG_CMD_FPGA is not set
-CONFIG_DM_ETH=y
-CONFIG_DM_SERIAL=y
diff --git a/configs/Ampe_A76_defconfig b/configs/Ampe_A76_defconfig
index 99aa141..2ee0307 100644
--- a/configs/Ampe_A76_defconfig
+++ b/configs/Ampe_A76_defconfig
@@ -18,5 +18,3 @@ CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=2,AXP209_POWER"
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set
 # CONFIG_CMD_FPGA is not set
-CONFIG_DM_ETH=y
-CONFIG_DM_SERIAL=y
diff --git a/configs/Auxtek-T004_defconfig b/configs/Auxtek-T004_defconfig
index 016ccd9..c019176 100644
--- a/configs/Auxtek-T004_defconfig
+++ b/configs/Auxtek-T004_defconfig
@@ -6,11 +6,8 @@ CONFIG_USB1_VBUS_PIN="PG13"
 CONFIG_DEFAULT_DEVICE_TREE="sun5i-a10s-auxtek-t004"
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
 CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="AXP152_POWER,USB_EHCI"
+CONFIG_SYS_EXTRA_OPTIONS="AXP152_POWER"
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set
 # CONFIG_CMD_FPGA is not set
-CONFIG_DM_ETH=y
-CONFIG_DM_SERIAL=y
-CONFIG_USB=y
-CONFIG_DM_USB=y
+CONFIG_USB_EHCI_HCD=y
diff --git a/configs/Bananapi_defconfig b/configs/Bananapi_defconfig
index 3e186f6..4b9ef35 100644
--- a/configs/Bananapi_defconfig
+++ b/configs/Bananapi_defconfig
@@ -6,12 +6,9 @@ CONFIG_GMAC_TX_DELAY=3
 CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-bananapi"
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
 CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,RGMII,MACPWR=SUNXI_GPH(23),AHCI,USB_EHCI"
+CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,RGMII,MACPWR=SUNXI_GPH(23),AHCI"
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set
 # CONFIG_CMD_FPGA is not set
-CONFIG_DM_ETH=y
 CONFIG_ETH_DESIGNWARE=y
-CONFIG_DM_SERIAL=y
-CONFIG_USB=y
-CONFIG_DM_USB=y
+CONFIG_USB_EHCI_HCD=y
diff --git a/configs/Bananapro_defconfig b/configs/Bananapro_defconfig
index 5bd2fd6..5506ab3 100644
--- a/configs/Bananapro_defconfig
+++ b/configs/Bananapro_defconfig
@@ -8,12 +8,9 @@ CONFIG_GMAC_TX_DELAY=3
 CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-bananapro"
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
 CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,RGMII,MACPWR=SUNXI_GPH(23),AHCI,USB_EHCI"
+CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,RGMII,MACPWR=SUNXI_GPH(23),AHCI"
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set
 # CONFIG_CMD_FPGA is not set
-CONFIG_DM_ETH=y
 CONFIG_ETH_DESIGNWARE=y
-CONFIG_DM_SERIAL=y
-CONFIG_USB=y
-CONFIG_DM_USB=y
+CONFIG_USB_EHCI_HCD=y
diff --git a/configs/CSQ_CS908_defconfig b/configs/CSQ_CS908_defconfig
index 54f4846..fe88a7b 100644
--- a/configs/CSQ_CS908_defconfig
+++ b/configs/CSQ_CS908_defconfig
@@ -7,14 +7,12 @@ CONFIG_USB2_VBUS_PIN=""
 CONFIG_DEFAULT_DEVICE_TREE="sun6i-a31s-cs908"
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
 CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="USB_EHCI,SUNXI_GMAC"
+CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC"
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set
 # CONFIG_CMD_FPGA is not set
-CONFIG_DM_ETH=y
 CONFIG_ETH_DESIGNWARE=y
-CONFIG_DM_SERIAL=y
 CONFIG_AXP221_DLDO1_VOLT=3300
 CONFIG_AXP221_ALDO1_VOLT=3300
-CONFIG_USB=y
-CONFIG_DM_USB=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_MUSB_SUNXI=y
diff --git a/configs/Chuwi_V7_CW0825_defconfig b/configs/Chuwi_V7_CW0825_defconfig
index 3a2a219..cb659c9 100644
--- a/configs/Chuwi_V7_CW0825_defconfig
+++ b/configs/Chuwi_V7_CW0825_defconfig
@@ -18,8 +18,6 @@ CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER"
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set
 # CONFIG_CMD_FPGA is not set
-CONFIG_DM_ETH=y
-CONFIG_DM_SERIAL=y
 CONFIG_VIDEO_LCD_SPI_CS="PA0"
 CONFIG_VIDEO_LCD_SPI_SCLK="PA1"
 CONFIG_VIDEO_LCD_SPI_MOSI="PA2"
diff --git a/configs/Colombus_defconfig b/configs/Colombus_defconfig
index 9d84901..1ae8c16 100644
--- a/configs/Colombus_defconfig
+++ b/configs/Colombus_defconfig
@@ -7,13 +7,10 @@ CONFIG_USB1_VBUS_PIN=""
 CONFIG_DEFAULT_DEVICE_TREE="sun6i-a31-colombus"
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
 CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="USB_EHCI,SUNXI_GMAC"
+CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC"
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set
 # CONFIG_CMD_FPGA is not set
-CONFIG_DM_ETH=y
 CONFIG_ETH_DESIGNWARE=y
-CONFIG_DM_SERIAL=y
 CONFIG_AXP221_ALDO1_VOLT=3300
-CONFIG_USB=y
-CONFIG_DM_USB=y
+CONFIG_USB_EHCI_HCD=y
diff --git a/configs/Cubieboard2_defconfig b/configs/Cubieboard2_defconfig
index 0fbaa23..9bcaed1 100644
--- a/configs/Cubieboard2_defconfig
+++ b/configs/Cubieboard2_defconfig
@@ -6,12 +6,9 @@ CONFIG_MMC0_CD_PIN="PH1"
 CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-cubieboard2"
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
 CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,AHCI,SATAPWR=SUNXI_GPB(8),USB_EHCI"
+CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,AHCI,SATAPWR=SUNXI_GPB(8)"
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set
 # CONFIG_CMD_FPGA is not set
-CONFIG_DM_ETH=y
 CONFIG_ETH_DESIGNWARE=y
-CONFIG_DM_SERIAL=y
-CONFIG_USB=y
-CONFIG_DM_USB=y
+CONFIG_USB_EHCI_HCD=y
diff --git a/configs/Cubieboard_defconfig b/configs/Cubieboard_defconfig
index 0d0051e..fa60ddf 100644
--- a/configs/Cubieboard_defconfig
+++ b/configs/Cubieboard_defconfig
@@ -5,11 +5,8 @@ CONFIG_DRAM_CLK=480
 CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-cubieboard"
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
 CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_EMAC,AHCI,SATAPWR=SUNXI_GPB(8),USB_EHCI"
+CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_EMAC,AHCI,SATAPWR=SUNXI_GPB(8)"
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set
 # CONFIG_CMD_FPGA is not set
-CONFIG_DM_ETH=y
-CONFIG_DM_SERIAL=y
-CONFIG_USB=y
-CONFIG_DM_USB=y
+CONFIG_USB_EHCI_HCD=y
diff --git a/configs/Cubietruck_defconfig b/configs/Cubietruck_defconfig
index 57a3847..b8809c8 100644
--- a/configs/Cubietruck_defconfig
+++ b/configs/Cubietruck_defconfig
@@ -7,12 +7,9 @@ CONFIG_GMAC_TX_DELAY=1
 CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-cubietruck"
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
 CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,RGMII,AHCI,SATAPWR=SUNXI_GPH(12),USB_EHCI"
+CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,RGMII,AHCI,SATAPWR=SUNXI_GPH(12)"
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set
 # CONFIG_CMD_FPGA is not set
-CONFIG_DM_ETH=y
 CONFIG_ETH_DESIGNWARE=y
-CONFIG_DM_SERIAL=y
-CONFIG_USB=y
-CONFIG_DM_USB=y
+CONFIG_USB_EHCI_HCD=y
diff --git a/configs/Et_q8_v1_6_defconfig b/configs/Et_q8_v1_6_defconfig
index e36895c..2783347 100644
--- a/configs/Et_q8_v1_6_defconfig
+++ b/configs/Et_q8_v1_6_defconfig
@@ -19,7 +19,5 @@ CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=5"
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set
 # CONFIG_CMD_FPGA is not set
-CONFIG_DM_ETH=y
-CONFIG_DM_SERIAL=y
 CONFIG_AXP221_DLDO1_VOLT=3300
 CONFIG_AXP221_ALDO1_VOLT=3000
diff --git a/configs/Hummingbird_A31_defconfig b/configs/Hummingbird_A31_defconfig
index 02c657a..35c746c 100644
--- a/configs/Hummingbird_A31_defconfig
+++ b/configs/Hummingbird_A31_defconfig
@@ -9,13 +9,10 @@ CONFIG_VIDEO_VGA_EXTERNAL_DAC_EN="PH25"
 CONFIG_DEFAULT_DEVICE_TREE="sun6i-a31-hummingbird"
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
 CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="USB_EHCI,SUNXI_GMAC,RGMII,MACPWR=SUNXI_GPA(21)"
+CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC,RGMII,MACPWR=SUNXI_GPA(21)"
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set
 # CONFIG_CMD_FPGA is not set
-CONFIG_DM_ETH=y
 CONFIG_ETH_DESIGNWARE=y
-CONFIG_DM_SERIAL=y
 CONFIG_AXP221_ALDO1_VOLT=3300
-CONFIG_USB=y
-CONFIG_DM_USB=y
+CONFIG_USB_EHCI_HCD=y
diff --git a/configs/Hyundai_A7HD_defconfig b/configs/Hyundai_A7HD_defconfig
index 7800fa2..06fdd2a 100644
--- a/configs/Hyundai_A7HD_defconfig
+++ b/configs/Hyundai_A7HD_defconfig
@@ -20,5 +20,3 @@ CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER"
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set
 # CONFIG_CMD_FPGA is not set
-CONFIG_DM_ETH=y
-CONFIG_DM_SERIAL=y
diff --git a/configs/Ippo_q8h_v1_2_a33_1024x600_defconfig b/configs/Ippo_q8h_v1_2_a33_1024x600_defconfig
index 8e26f37..fda7683 100644
--- a/configs/Ippo_q8h_v1_2_a33_1024x600_defconfig
+++ b/configs/Ippo_q8h_v1_2_a33_1024x600_defconfig
@@ -5,6 +5,7 @@ CONFIG_DRAM_CLK=480
 CONFIG_DRAM_ZQ=15291
 CONFIG_USB0_VBUS_PIN="AXP0-VBUS-ENABLE"
 CONFIG_USB0_VBUS_DET="AXP0-VBUS-DETECT"
+CONFIG_USB0_ID_DET="PH8"
 CONFIG_AXP_GPIO=y
 CONFIG_VIDEO_LCD_MODE="x:1024,y:600,depth:18,pclk_khz:51000,le:159,ri:160,up:22,lo:12,hs:1,vs:1,sync:3,vmode:0"
 CONFIG_VIDEO_LCD_DCLK_PHASE=0
@@ -19,7 +20,5 @@ CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=5"
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set
 # CONFIG_CMD_FPGA is not set
-CONFIG_DM_ETH=y
-CONFIG_DM_SERIAL=y
 CONFIG_AXP221_DLDO1_VOLT=3300
 CONFIG_AXP221_ALDO1_VOLT=3000
diff --git a/configs/Ippo_q8h_v1_2_defconfig b/configs/Ippo_q8h_v1_2_defconfig
index ab62210..490cbe2 100644
--- a/configs/Ippo_q8h_v1_2_defconfig
+++ b/configs/Ippo_q8h_v1_2_defconfig
@@ -5,6 +5,7 @@ CONFIG_DRAM_CLK=432
 CONFIG_DRAM_ZQ=63306
 CONFIG_USB0_VBUS_PIN="AXP0-VBUS-ENABLE"
 CONFIG_USB0_VBUS_DET="AXP0-VBUS-DETECT"
+CONFIG_USB0_ID_DET="PH8"
 CONFIG_AXP_GPIO=y
 CONFIG_VIDEO_LCD_MODE="x:800,y:480,depth:18,pclk_khz:33000,le:87,ri:167,up:31,lo:13,hs:1,vs:1,sync:3,vmode:0"
 CONFIG_VIDEO_LCD_DCLK_PHASE=0
@@ -19,7 +20,5 @@ CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=5"
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set
 # CONFIG_CMD_FPGA is not set
-CONFIG_DM_ETH=y
-CONFIG_DM_SERIAL=y
 CONFIG_AXP221_DLDO1_VOLT=3300
 CONFIG_AXP221_ALDO1_VOLT=3000
diff --git a/configs/Ippo_q8h_v5_defconfig b/configs/Ippo_q8h_v5_defconfig
index 312a38c..aa1eb69 100644
--- a/configs/Ippo_q8h_v5_defconfig
+++ b/configs/Ippo_q8h_v5_defconfig
@@ -5,6 +5,7 @@ CONFIG_DRAM_CLK=480
 CONFIG_DRAM_ZQ=63351
 CONFIG_USB0_VBUS_PIN="AXP0-VBUS-ENABLE"
 CONFIG_USB0_VBUS_DET="AXP0-VBUS-DETECT"
+CONFIG_USB0_ID_DET="PH8"
 CONFIG_AXP_GPIO=y
 CONFIG_VIDEO_LCD_MODE="x:800,y:480,depth:18,pclk_khz:33000,le:87,ri:168,up:31,lo:13,hs:1,vs:1,sync:3,vmode:0"
 CONFIG_VIDEO_LCD_DCLK_PHASE=0
@@ -19,7 +20,5 @@ CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=5"
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set
 # CONFIG_CMD_FPGA is not set
-CONFIG_DM_ETH=y
-CONFIG_DM_SERIAL=y
 CONFIG_AXP221_DLDO1_VOLT=3300
 CONFIG_AXP221_ALDO1_VOLT=3000
diff --git a/configs/Linksprite_pcDuino3_Nano_defconfig b/configs/Linksprite_pcDuino3_Nano_defconfig
index 04ec7ab..0b64b60 100644
--- a/configs/Linksprite_pcDuino3_Nano_defconfig
+++ b/configs/Linksprite_pcDuino3_Nano_defconfig
@@ -8,12 +8,9 @@ CONFIG_GMAC_TX_DELAY=3
 CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-pcduino3-nano"
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
 CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,RGMII,AHCI,SATAPWR=SUNXI_GPH(2),USB_EHCI"
+CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,RGMII,AHCI,SATAPWR=SUNXI_GPH(2)"
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set
 # CONFIG_CMD_FPGA is not set
-CONFIG_DM_ETH=y
 CONFIG_ETH_DESIGNWARE=y
-CONFIG_DM_SERIAL=y
-CONFIG_USB=y
-CONFIG_DM_USB=y
+CONFIG_USB_EHCI_HCD=y
diff --git a/configs/Linksprite_pcDuino3_defconfig b/configs/Linksprite_pcDuino3_defconfig
index 6d7690d..cced032 100644
--- a/configs/Linksprite_pcDuino3_defconfig
+++ b/configs/Linksprite_pcDuino3_defconfig
@@ -6,12 +6,9 @@ CONFIG_DRAM_ZQ=122
 CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-pcduino3"
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
 CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,AHCI,SATAPWR=SUNXI_GPH(2),USB_EHCI"
+CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,AHCI,SATAPWR=SUNXI_GPH(2)"
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set
 # CONFIG_CMD_FPGA is not set
-CONFIG_DM_ETH=y
 CONFIG_ETH_DESIGNWARE=y
-CONFIG_DM_SERIAL=y
-CONFIG_USB=y
-CONFIG_DM_USB=y
+CONFIG_USB_EHCI_HCD=y
diff --git a/configs/Linksprite_pcDuino_defconfig b/configs/Linksprite_pcDuino_defconfig
index ddd162f..de44890 100644
--- a/configs/Linksprite_pcDuino_defconfig
+++ b/configs/Linksprite_pcDuino_defconfig
@@ -5,11 +5,8 @@ CONFIG_DRAM_CLK=408
 CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-pcduino"
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
 CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_EMAC,USB_EHCI"
+CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_EMAC"
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set
 # CONFIG_CMD_FPGA is not set
-CONFIG_DM_ETH=y
-CONFIG_DM_SERIAL=y
-CONFIG_USB=y
-CONFIG_DM_USB=y
+CONFIG_USB_EHCI_HCD=y
diff --git a/configs/MK808C_defconfig b/configs/MK808C_defconfig
index a6db139..5e37485 100644
--- a/configs/MK808C_defconfig
+++ b/configs/MK808C_defconfig
@@ -5,11 +5,8 @@ CONFIG_DRAM_CLK=384
 CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-mk808c"
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
 CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,USB_EHCI"
+CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER"
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set
 # CONFIG_CMD_FPGA is not set
-CONFIG_DM_ETH=y
-CONFIG_DM_SERIAL=y
-CONFIG_USB=y
-CONFIG_DM_USB=y
+CONFIG_USB_EHCI_HCD=y
diff --git a/configs/MSI_Primo73_defconfig b/configs/MSI_Primo73_defconfig
index 6e0d246..7e83536 100644
--- a/configs/MSI_Primo73_defconfig
+++ b/configs/MSI_Primo73_defconfig
@@ -15,7 +15,3 @@ CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER"
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set
 # CONFIG_CMD_FPGA is not set
-CONFIG_DM_ETH=y
-CONFIG_DM_SERIAL=y
-CONFIG_USB=y
-CONFIG_DM_USB=y
diff --git a/configs/MSI_Primo81_defconfig b/configs/MSI_Primo81_defconfig
index 9787e34..b3b21cb 100644
--- a/configs/MSI_Primo81_defconfig
+++ b/configs/MSI_Primo81_defconfig
@@ -18,8 +18,6 @@ CONFIG_SPL=y
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set
 # CONFIG_CMD_FPGA is not set
-CONFIG_DM_ETH=y
-CONFIG_DM_SERIAL=y
 CONFIG_AXP221_DLDO1_VOLT=3300
 CONFIG_VIDEO_LCD_SSD2828_TX_CLK=27
 CONFIG_VIDEO_LCD_SSD2828_RESET="PA26"
@@ -27,4 +25,3 @@ CONFIG_VIDEO_LCD_SPI_CS="PH9"
 CONFIG_VIDEO_LCD_SPI_SCLK="PH10"
 CONFIG_VIDEO_LCD_SPI_MOSI="PH11"
 CONFIG_VIDEO_LCD_SPI_MISO="PH12"
-CONFIG_USB=y
diff --git a/configs/Marsboard_A10_defconfig b/configs/Marsboard_A10_defconfig
index ed41af6..4933659 100644
--- a/configs/Marsboard_A10_defconfig
+++ b/configs/Marsboard_A10_defconfig
@@ -4,11 +4,8 @@ CONFIG_MACH_SUN4I=y
 CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-marsboard"
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
 CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="SUNXI_EMAC,AHCI,USB_EHCI"
+CONFIG_SYS_EXTRA_OPTIONS="SUNXI_EMAC,AHCI"
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set
 # CONFIG_CMD_FPGA is not set
-CONFIG_DM_ETH=y
-CONFIG_DM_SERIAL=y
-CONFIG_USB=y
-CONFIG_DM_USB=y
+CONFIG_USB_EHCI_HCD=y
diff --git a/configs/Mele_A1000G_quad_defconfig b/configs/Mele_A1000G_quad_defconfig
index 6e0a493..ffc8d9b 100644
--- a/configs/Mele_A1000G_quad_defconfig
+++ b/configs/Mele_A1000G_quad_defconfig
@@ -7,16 +7,14 @@ CONFIG_USB2_VBUS_PIN=""
 CONFIG_DEFAULT_DEVICE_TREE="sun6i-a31-mele-a1000g-quad"
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
 CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="USB_EHCI,SUNXI_GMAC"
+CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC"
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set
 # CONFIG_CMD_FPGA is not set
-CONFIG_DM_ETH=y
 CONFIG_ETH_DESIGNWARE=y
-CONFIG_DM_SERIAL=y
 CONFIG_AXP221_DCDC1_VOLT=3300
 CONFIG_AXP221_DLDO1_VOLT=3300
 CONFIG_AXP221_DLDO4_VOLT=3300
 CONFIG_AXP221_ALDO1_VOLT=3300
-CONFIG_USB=y
-CONFIG_DM_USB=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_MUSB_SUNXI=y
diff --git a/configs/Mele_A1000_defconfig b/configs/Mele_A1000_defconfig
index 983ffdc..5e66d43 100644
--- a/configs/Mele_A1000_defconfig
+++ b/configs/Mele_A1000_defconfig
@@ -5,11 +5,8 @@ CONFIG_VIDEO_VGA=y
 CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-a1000"
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
 CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_EMAC,MACPWR=SUNXI_GPH(15),AHCI,USB_EHCI"
+CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_EMAC,MACPWR=SUNXI_GPH(15),AHCI"
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set
 # CONFIG_CMD_FPGA is not set
-CONFIG_DM_ETH=y
-CONFIG_DM_SERIAL=y
-CONFIG_USB=y
-CONFIG_DM_USB=y
+CONFIG_USB_EHCI_HCD=y
diff --git a/configs/Mele_I7_defconfig b/configs/Mele_I7_defconfig
index 7f083a7..774a92f 100644
--- a/configs/Mele_I7_defconfig
+++ b/configs/Mele_I7_defconfig
@@ -7,16 +7,13 @@ CONFIG_USB2_VBUS_PIN=""
 CONFIG_DEFAULT_DEVICE_TREE="sun6i-a31-i7"
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
 CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="USB_EHCI,SUNXI_GMAC"
+CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC"
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set
 # CONFIG_CMD_FPGA is not set
-CONFIG_DM_ETH=y
 CONFIG_ETH_DESIGNWARE=y
-CONFIG_DM_SERIAL=y
 CONFIG_AXP221_DCDC1_VOLT=3300
 CONFIG_AXP221_DLDO1_VOLT=3300
 CONFIG_AXP221_DLDO4_VOLT=3300
 CONFIG_AXP221_ALDO1_VOLT=3300
-CONFIG_USB=y
-CONFIG_DM_USB=y
+CONFIG_USB_EHCI_HCD=y
diff --git a/configs/Mele_M3_defconfig b/configs/Mele_M3_defconfig
index 73d87c3..d498269 100644
--- a/configs/Mele_M3_defconfig
+++ b/configs/Mele_M3_defconfig
@@ -8,12 +8,9 @@ CONFIG_VIDEO_VGA=y
 CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-m3"
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
 CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,USB_EHCI"
+CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC"
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set
 # CONFIG_CMD_FPGA is not set
-CONFIG_DM_ETH=y
 CONFIG_ETH_DESIGNWARE=y
-CONFIG_DM_SERIAL=y
-CONFIG_USB=y
-CONFIG_DM_USB=y
+CONFIG_USB_EHCI_HCD=y
diff --git a/configs/Mele_M5_defconfig b/configs/Mele_M5_defconfig
index 79c5901..40f5daa 100644
--- a/configs/Mele_M5_defconfig
+++ b/configs/Mele_M5_defconfig
@@ -7,12 +7,9 @@ CONFIG_MMC0_CD_PIN="PH1"
 CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-m5"
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
 CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC,AHCI,USB_EHCI,STATUSLED=234"
+CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC,AHCI,STATUSLED=234"
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set
 # CONFIG_CMD_FPGA is not set
-CONFIG_DM_ETH=y
 CONFIG_ETH_DESIGNWARE=y
-CONFIG_DM_SERIAL=y
-CONFIG_USB=y
-CONFIG_DM_USB=y
+CONFIG_USB_EHCI_HCD=y
diff --git a/configs/Mele_M9_defconfig b/configs/Mele_M9_defconfig
index e017ad7..b52e3c2 100644
--- a/configs/Mele_M9_defconfig
+++ b/configs/Mele_M9_defconfig
@@ -7,16 +7,13 @@ CONFIG_USB2_VBUS_PIN=""
 CONFIG_DEFAULT_DEVICE_TREE="sun6i-a31-m9"
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
 CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="USB_EHCI,SUNXI_GMAC"
+CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC"
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set
 # CONFIG_CMD_FPGA is not set
-CONFIG_DM_ETH=y
 CONFIG_ETH_DESIGNWARE=y
-CONFIG_DM_SERIAL=y
 CONFIG_AXP221_DCDC1_VOLT=3300
 CONFIG_AXP221_DLDO1_VOLT=3300
 CONFIG_AXP221_DLDO4_VOLT=3300
 CONFIG_AXP221_ALDO1_VOLT=3300
-CONFIG_USB=y
-CONFIG_DM_USB=y
+CONFIG_USB_EHCI_HCD=y
diff --git a/configs/Merrii_A80_Optimus_defconfig b/configs/Merrii_A80_Optimus_defconfig
index b02b1a3..8587bc8 100644
--- a/configs/Merrii_A80_Optimus_defconfig
+++ b/configs/Merrii_A80_Optimus_defconfig
@@ -12,7 +12,3 @@ CONFIG_DEFAULT_DEVICE_TREE="sun9i-a80-optimus"
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set
 # CONFIG_CMD_FPGA is not set
-CONFIG_DM_ETH=y
-CONFIG_DM_SERIAL=y
-CONFIG_USB=y
-CONFIG_DM_USB=y
diff --git a/configs/Mini-X_defconfig b/configs/Mini-X_defconfig
index da57711..c721c87 100644
--- a/configs/Mini-X_defconfig
+++ b/configs/Mini-X_defconfig
@@ -4,11 +4,10 @@ CONFIG_MACH_SUN4I=y
 CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-mini-xplus"
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
 CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,USB_EHCI"
+CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER"
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set
 # CONFIG_CMD_FPGA is not set
-CONFIG_DM_ETH=y
-CONFIG_DM_SERIAL=y
-CONFIG_USB=y
-CONFIG_DM_USB=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_MUSB_SUNXI=y
+CONFIG_USB0_VBUS_PIN="PB9"
diff --git a/configs/Orangepi_defconfig b/configs/Orangepi_defconfig
index ba89a25..f9408b1 100644
--- a/configs/Orangepi_defconfig
+++ b/configs/Orangepi_defconfig
@@ -9,12 +9,9 @@ CONFIG_GMAC_TX_DELAY=3
 CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-orangepi"
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
 CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,RGMII,MACPWR=SUNXI_GPH(23),AHCI,USB_EHCI"
+CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,RGMII,MACPWR=SUNXI_GPH(23),AHCI"
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set
 # CONFIG_CMD_FPGA is not set
-CONFIG_DM_ETH=y
 CONFIG_ETH_DESIGNWARE=y
-CONFIG_DM_SERIAL=y
-CONFIG_USB=y
-CONFIG_DM_USB=y
+CONFIG_USB_EHCI_HCD=y
diff --git a/configs/Orangepi_mini_defconfig b/configs/Orangepi_mini_defconfig
index 8f03815..1dc0e76 100644
--- a/configs/Orangepi_mini_defconfig
+++ b/configs/Orangepi_mini_defconfig
@@ -11,12 +11,9 @@ CONFIG_GMAC_TX_DELAY=3
 CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-orangepi-mini"
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
 CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,RGMII,MACPWR=SUNXI_GPH(23),AHCI,USB_EHCI"
+CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,RGMII,MACPWR=SUNXI_GPH(23),AHCI"
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set
 # CONFIG_CMD_FPGA is not set
-CONFIG_DM_ETH=y
 CONFIG_ETH_DESIGNWARE=y
-CONFIG_DM_SERIAL=y
-CONFIG_USB=y
-CONFIG_DM_USB=y
+CONFIG_USB_EHCI_HCD=y
diff --git a/configs/Sinlinx_SinA33_defconfig b/configs/Sinlinx_SinA33_defconfig
index e9e62da..720f3dc 100644
--- a/configs/Sinlinx_SinA33_defconfig
+++ b/configs/Sinlinx_SinA33_defconfig
@@ -9,8 +9,4 @@ CONFIG_SPL=y
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set
 # CONFIG_CMD_FPGA is not set
-CONFIG_DM_ETH=y
-CONFIG_DM_SERIAL=y
 CONFIG_AXP221_ALDO1_VOLT=3000
-CONFIG_USB=y
-CONFIG_DM_USB=y
diff --git a/configs/TZX-Q8-713B7_defconfig b/configs/TZX-Q8-713B7_defconfig
index 68961fc..6a716bd 100644
--- a/configs/TZX-Q8-713B7_defconfig
+++ b/configs/TZX-Q8-713B7_defconfig
@@ -18,5 +18,3 @@ CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=2,AXP209_POWER"
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set
 # CONFIG_CMD_FPGA is not set
-CONFIG_DM_ETH=y
-CONFIG_DM_SERIAL=y
diff --git a/configs/UTOO_P66_defconfig b/configs/UTOO_P66_defconfig
index c3b13b7..d59a044 100644
--- a/configs/UTOO_P66_defconfig
+++ b/configs/UTOO_P66_defconfig
@@ -23,4 +23,4 @@ CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER"
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set
 # CONFIG_CMD_FPGA is not set
-CONFIG_DM_ETH=y
+# CONFIG_REQUIRE_SERIAL_CONSOLE is not set
diff --git a/configs/Wexler_TAB7200_defconfig b/configs/Wexler_TAB7200_defconfig
index d9180c7..eadceb2 100644
--- a/configs/Wexler_TAB7200_defconfig
+++ b/configs/Wexler_TAB7200_defconfig
@@ -9,11 +9,8 @@ CONFIG_VIDEO_LCD_BL_PWM="PB2"
 CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-wexler-tab7200"
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
 CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,USB_EHCI"
+CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER"
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set
 # CONFIG_CMD_FPGA is not set
-CONFIG_DM_ETH=y
-CONFIG_DM_SERIAL=y
-CONFIG_USB=y
-CONFIG_DM_USB=y
+CONFIG_USB_EHCI_HCD=y
diff --git a/configs/Wits_Pro_A20_DKT_defconfig b/configs/Wits_Pro_A20_DKT_defconfig
index bb8dd29..66b51bc 100644
--- a/configs/Wits_Pro_A20_DKT_defconfig
+++ b/configs/Wits_Pro_A20_DKT_defconfig
@@ -11,12 +11,9 @@ CONFIG_VIDEO_LCD_PANEL_LVDS=y
 CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-wits-pro-a20-dkt"
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
 CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,RGMII,AHCI,USB_EHCI"
+CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,RGMII,AHCI"
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set
 # CONFIG_CMD_FPGA is not set
-CONFIG_DM_ETH=y
 CONFIG_ETH_DESIGNWARE=y
-CONFIG_DM_SERIAL=y
-CONFIG_USB=y
-CONFIG_DM_USB=y
+CONFIG_USB_EHCI_HCD=y
diff --git a/configs/Yones_Toptech_BD1078_defconfig b/configs/Yones_Toptech_BD1078_defconfig
index aab580e..22b51a2 100644
--- a/configs/Yones_Toptech_BD1078_defconfig
+++ b/configs/Yones_Toptech_BD1078_defconfig
@@ -24,5 +24,3 @@ CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER"
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set
 # CONFIG_CMD_FPGA is not set
-CONFIG_DM_ETH=y
-CONFIG_DM_SERIAL=y
diff --git a/configs/ba10_tv_box_defconfig b/configs/ba10_tv_box_defconfig
index c84e82e..ae302c5 100644
--- a/configs/ba10_tv_box_defconfig
+++ b/configs/ba10_tv_box_defconfig
@@ -7,11 +7,10 @@ CONFIG_USB2_VBUS_PIN="PH12"
 CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-ba10-tvbox"
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
 CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_EMAC,USB_EHCI"
+CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_EMAC"
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set
 # CONFIG_CMD_FPGA is not set
-CONFIG_DM_ETH=y
-CONFIG_DM_SERIAL=y
-CONFIG_USB=y
-CONFIG_DM_USB=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_MUSB_SUNXI=y
+CONFIG_USB0_VBUS_PIN="PB9"
diff --git a/configs/forfun_q88db_defconfig b/configs/forfun_q88db_defconfig
index 85c807a..8f10c25 100644
--- a/configs/forfun_q88db_defconfig
+++ b/configs/forfun_q88db_defconfig
@@ -17,5 +17,3 @@ CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER"
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set
 # CONFIG_CMD_FPGA is not set
-CONFIG_DM_ETH=y
-CONFIG_DM_SERIAL=y
diff --git a/configs/ga10h_v1_1_defconfig b/configs/ga10h_v1_1_defconfig
index 315627d..e766db4 100644
--- a/configs/ga10h_v1_1_defconfig
+++ b/configs/ga10h_v1_1_defconfig
@@ -6,6 +6,7 @@ CONFIG_DRAM_ZQ=15291
 CONFIG_DRAM_ODT_EN=y
 CONFIG_USB0_VBUS_PIN="AXP0-VBUS-ENABLE"
 CONFIG_USB0_VBUS_DET="AXP0-VBUS-DETECT"
+CONFIG_USB0_ID_DET="PH8"
 CONFIG_AXP_GPIO=y
 CONFIG_VIDEO_LCD_MODE="x:1024,y:600,depth:18,pclk_khz:52000,le:138,ri:162,up:22,lo:10,hs:20,vs:3,sync:3,vmode:0"
 CONFIG_VIDEO_LCD_DCLK_PHASE=0
@@ -21,7 +22,6 @@ CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=5"
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set
 # CONFIG_CMD_FPGA is not set
-CONFIG_DM_ETH=y
-CONFIG_DM_SERIAL=y
 CONFIG_AXP221_DLDO1_VOLT=3300
 CONFIG_AXP221_ALDO1_VOLT=3000
+CONFIG_USB_EHCI_HCD=y
diff --git a/configs/i12-tvbox_defconfig b/configs/i12-tvbox_defconfig
index 3a69422..99e78ba 100644
--- a/configs/i12-tvbox_defconfig
+++ b/configs/i12-tvbox_defconfig
@@ -5,12 +5,9 @@ CONFIG_DRAM_CLK=384
 CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-i12-tvbox"
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
 CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,MACPWR=SUNXI_GPH(21),USB_EHCI"
+CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,MACPWR=SUNXI_GPH(21)"
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set
 # CONFIG_CMD_FPGA is not set
-CONFIG_DM_ETH=y
 CONFIG_ETH_DESIGNWARE=y
-CONFIG_DM_SERIAL=y
-CONFIG_USB=y
-CONFIG_DM_USB=y
+CONFIG_USB_EHCI_HCD=y
diff --git a/configs/iNet_3F_defconfig b/configs/iNet_3F_defconfig
index 54de300..c4611cf 100644
--- a/configs/iNet_3F_defconfig
+++ b/configs/iNet_3F_defconfig
@@ -19,5 +19,3 @@ CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER"
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set
 # CONFIG_CMD_FPGA is not set
-CONFIG_DM_ETH=y
-CONFIG_DM_SERIAL=y
diff --git a/configs/iNet_3W_defconfig b/configs/iNet_3W_defconfig
index e1beac8..d75eb21 100644
--- a/configs/iNet_3W_defconfig
+++ b/configs/iNet_3W_defconfig
@@ -19,5 +19,3 @@ CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER"
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set
 # CONFIG_CMD_FPGA is not set
-CONFIG_DM_ETH=y
-CONFIG_DM_SERIAL=y
diff --git a/configs/iNet_86VS_defconfig b/configs/iNet_86VS_defconfig
index 627e211..b9f2066 100644
--- a/configs/iNet_86VS_defconfig
+++ b/configs/iNet_86VS_defconfig
@@ -17,5 +17,3 @@ CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER"
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set
 # CONFIG_CMD_FPGA is not set
-CONFIG_DM_ETH=y
-CONFIG_DM_SERIAL=y
diff --git a/configs/jesurun_q5_defconfig b/configs/jesurun_q5_defconfig
index 4b09a33..a2115b6 100644
--- a/configs/jesurun_q5_defconfig
+++ b/configs/jesurun_q5_defconfig
@@ -5,11 +5,8 @@ CONFIG_DRAM_CLK=312
 CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-jesurun-q5"
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
 CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_EMAC,USB_EHCI,MACPWR=SUNXI_GPH(19)"
+CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_EMAC,MACPWR=SUNXI_GPH(19)"
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set
 # CONFIG_CMD_FPGA is not set
-CONFIG_DM_ETH=y
-CONFIG_DM_SERIAL=y
-CONFIG_USB=y
-CONFIG_DM_USB=y
+CONFIG_USB_EHCI_HCD=y
diff --git a/configs/mixtile_loftq_defconfig b/configs/mixtile_loftq_defconfig
index a8c497c..26fc4ce 100644
--- a/configs/mixtile_loftq_defconfig
+++ b/configs/mixtile_loftq_defconfig
@@ -8,13 +8,10 @@ CONFIG_USB2_VBUS_PIN=""
 CONFIG_DEFAULT_DEVICE_TREE="sun6i-a31-mixtile-loftq"
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
 CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="USB_EHCI,SUNXI_GMAC,RGMII,MACPWR=SUNXI_GPA(21)"
+CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC,RGMII,MACPWR=SUNXI_GPA(21)"
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set
 # CONFIG_CMD_FPGA is not set
-CONFIG_DM_ETH=y
 CONFIG_ETH_DESIGNWARE=y
-CONFIG_DM_SERIAL=y
 CONFIG_AXP221_ALDO1_VOLT=3300
-CONFIG_USB=y
-CONFIG_DM_USB=y
+CONFIG_USB_EHCI_HCD=y
diff --git a/configs/mk802_a10s_defconfig b/configs/mk802_a10s_defconfig
index dc78fa4..db437f0 100644
--- a/configs/mk802_a10s_defconfig
+++ b/configs/mk802_a10s_defconfig
@@ -7,11 +7,8 @@ CONFIG_USB1_VBUS_PIN="PB10"
 CONFIG_DEFAULT_DEVICE_TREE="sun5i-a10s-mk802"
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
 CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="AXP152_POWER,USB_EHCI"
+CONFIG_SYS_EXTRA_OPTIONS="AXP152_POWER"
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set
 # CONFIG_CMD_FPGA is not set
-CONFIG_DM_ETH=y
-CONFIG_DM_SERIAL=y
-CONFIG_USB=y
-CONFIG_DM_USB=y
+CONFIG_USB_EHCI_HCD=y
diff --git a/configs/mk802_defconfig b/configs/mk802_defconfig
index 31bde00..68b2c5e 100644
--- a/configs/mk802_defconfig
+++ b/configs/mk802_defconfig
@@ -9,7 +9,4 @@ CONFIG_SYS_EXTRA_OPTIONS="USB_EHCI"
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set
 # CONFIG_CMD_FPGA is not set
-CONFIG_DM_ETH=y
-CONFIG_DM_SERIAL=y
-CONFIG_USB=y
-CONFIG_DM_USB=y
+CONFIG_USB_EHCI_HCD=y
diff --git a/configs/mk802ii_defconfig b/configs/mk802ii_defconfig
index ffa7891..d3cb664 100644
--- a/configs/mk802ii_defconfig
+++ b/configs/mk802ii_defconfig
@@ -4,11 +4,8 @@ CONFIG_MACH_SUN4I=y
 CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-mk802ii"
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
 CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,USB_EHCI"
+CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER"
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set
 # CONFIG_CMD_FPGA is not set
-CONFIG_DM_ETH=y
-CONFIG_DM_SERIAL=y
-CONFIG_USB=y
-CONFIG_DM_USB=y
+CONFIG_USB_EHCI_HCD=y
diff --git a/configs/r7-tv-dongle_defconfig b/configs/r7-tv-dongle_defconfig
index ac7928d..62c58fc 100644
--- a/configs/r7-tv-dongle_defconfig
+++ b/configs/r7-tv-dongle_defconfig
@@ -6,11 +6,8 @@ CONFIG_USB1_VBUS_PIN="PG13"
 CONFIG_DEFAULT_DEVICE_TREE="sun5i-a10s-r7-tv-dongle"
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
 CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="AXP152_POWER,USB_EHCI"
+CONFIG_SYS_EXTRA_OPTIONS="AXP152_POWER"
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set
 # CONFIG_CMD_FPGA is not set
-CONFIG_DM_ETH=y
-CONFIG_DM_SERIAL=y
-CONFIG_USB=y
-CONFIG_DM_USB=y
+CONFIG_USB_EHCI_HCD=y
diff --git a/configs/sunxi_Gemei_G9_defconfig b/configs/sunxi_Gemei_G9_defconfig
index e95cbe4..d0f987c 100644
--- a/configs/sunxi_Gemei_G9_defconfig
+++ b/configs/sunxi_Gemei_G9_defconfig
@@ -11,11 +11,8 @@ CONFIG_VIDEO_LCD_PANEL_LVDS=y
 CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-gemei-g9"
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
 CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,USB_EHCI"
+CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER"
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set
 # CONFIG_CMD_FPGA is not set
-CONFIG_DM_ETH=y
-CONFIG_DM_SERIAL=y
-CONFIG_USB=y
-CONFIG_DM_USB=y
+CONFIG_USB_EHCI_HCD=y
diff --git a/drivers/mmc/mmc.c b/drivers/mmc/mmc.c
index da47037..f12546a 100644
--- a/drivers/mmc/mmc.c
+++ b/drivers/mmc/mmc.c
@@ -1762,6 +1762,11 @@ static void do_preinit(void)
 
 int mmc_initialize(bd_t *bis)
 {
+	static int initialized = 0;
+	if (initialized)	/* Avoid initializing mmc multiple times */
+		return 0;
+	initialized = 1;
+
 	INIT_LIST_HEAD (&mmc_devices);
 	cur_dev_num = 0;
 
diff --git a/drivers/mmc/sunxi_mmc.c b/drivers/mmc/sunxi_mmc.c
index e7ab828..f9b9493 100644
--- a/drivers/mmc/sunxi_mmc.c
+++ b/drivers/mmc/sunxi_mmc.c
@@ -433,6 +433,23 @@ static int sunxi_mmc_getcd(struct mmc *mmc)
 	return !gpio_get_value(cd_pin);
 }
 
+int sunxi_mmc_has_egon_boot_signature(struct mmc *mmc)
+{
+	char *buf = malloc(512);
+	int valid_signature = 0;
+
+	if (buf == NULL)
+		panic("Failed to allocate memory\n");
+
+	if (mmc_getcd(mmc) && mmc_init(mmc) == 0 &&
+	    mmc->block_dev.block_read(mmc->block_dev.dev, 16, 1, buf) == 1 &&
+	    strncmp(&buf[4], "eGON.BT0", 8) == 0)
+		valid_signature = 1;
+
+	free(buf);
+	return valid_signature;
+}
+
 static const struct mmc_ops sunxi_mmc_ops = {
 	.send_cmd	= sunxi_mmc_send_cmd,
 	.set_ios	= sunxi_mmc_set_ios,
diff --git a/drivers/usb/musb-new/sunxi.c b/drivers/usb/musb-new/sunxi.c
index c123d61..3a29b18 100644
--- a/drivers/usb/musb-new/sunxi.c
+++ b/drivers/usb/musb-new/sunxi.c
@@ -26,17 +26,12 @@
 #include <asm/arch/gpio.h>
 #include <asm/arch/usb_phy.h>
 #include <asm-generic/gpio.h>
+#include <dm/lists.h>
+#include <dm/root.h>
+#include <linux/usb/musb.h>
 #include "linux-compat.h"
 #include "musb_core.h"
-#ifdef CONFIG_AXP152_POWER
-#include <axp152.h>
-#endif
-#ifdef CONFIG_AXP209_POWER
-#include <axp209.h>
-#endif
-#ifdef CONFIG_AXP221_POWER
-#include <axp221.h>
-#endif
+#include "musb_uboot.h"
 
 /******************************************************************************
  ******************************************************************************
@@ -201,6 +196,8 @@ static bool enabled = false;
 
 static int sunxi_musb_enable(struct musb *musb)
 {
+	int ret;
+
 	pr_debug("%s():\n", __func__);
 
 	if (enabled)
@@ -209,8 +206,19 @@ static int sunxi_musb_enable(struct musb *musb)
 	/* select PIO mode */
 	musb_writeb(musb->mregs, USBC_REG_o_VEND0, 0);
 
-	if (is_host_enabled(musb))
+	if (is_host_enabled(musb)) {
+		ret = sunxi_usb_phy_vbus_detect(0);
+		if (ret == 1) {
+			printf("A charger is plugged into the OTG: ");
+			return -ENODEV;
+		}
+		ret = sunxi_usb_phy_id_detect(0);
+		if (ret == 1) {
+			printf("No host cable detected: ");
+			return -ENODEV;
+		}
 		sunxi_usb_phy_power_on(0); /* port power on */
+	}
 
 	USBC_ForceVbusValidToHigh(musb->mregs);
 
@@ -237,18 +245,9 @@ static void sunxi_musb_disable(struct musb *musb)
 static int sunxi_musb_init(struct musb *musb)
 {
 	struct sunxi_ccm_reg *ccm = (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
-	int err;
 
 	pr_debug("%s():\n", __func__);
 
-	if (is_host_enabled(musb)) {
-		err = sunxi_usb_phy_vbus_detect(0);
-		if (err) {
-			eprintf("Error: A charger is plugged into the OTG\n");
-			return -EIO;
-		}
-	}
-
 	musb->isr = sunxi_musb_interrupt;
 
 	setbits_le32(&ccm->ahb_gate0, 1 << AHB_GATE_OFFSET_USB0);
@@ -273,8 +272,86 @@ static int sunxi_musb_init(struct musb *musb)
 	return 0;
 }
 
-const struct musb_platform_ops sunxi_musb_ops = {
+static const struct musb_platform_ops sunxi_musb_ops = {
 	.init		= sunxi_musb_init,
 	.enable		= sunxi_musb_enable,
 	.disable	= sunxi_musb_disable,
 };
+
+static struct musb_hdrc_config musb_config = {
+	.multipoint     = 1,
+	.dyn_fifo       = 1,
+	.num_eps        = 6,
+	.ram_bits       = 11,
+};
+
+static struct musb_hdrc_platform_data musb_plat = {
+#if defined(CONFIG_MUSB_HOST)
+	.mode           = MUSB_HOST,
+#else
+	.mode		= MUSB_PERIPHERAL,
+#endif
+	.config         = &musb_config,
+	.power          = 250,
+	.platform_ops	= &sunxi_musb_ops,
+};
+
+#ifdef CONFIG_MUSB_HOST
+int musb_usb_probe(struct udevice *dev)
+{
+	struct musb_host_data *host = dev_get_priv(dev);
+	struct usb_bus_priv *priv = dev_get_uclass_priv(dev);
+	int ret;
+
+	priv->desc_before_addr = true;
+
+	if (!host->host) {
+		host->host = musb_init_controller(&musb_plat, NULL,
+						  (void *)SUNXI_USB0_BASE);
+		if (!host->host)
+			return -EIO;
+	}
+
+	ret = musb_lowlevel_init(host);
+	if (ret == 0)
+		printf("MUSB OTG\n");
+
+	return ret;
+}
+
+int musb_usb_remove(struct udevice *dev)
+{
+	struct musb_host_data *host = dev_get_priv(dev);
+
+	musb_stop(host->host);
+
+	return 0;
+}
+
+U_BOOT_DRIVER(usb_musb) = {
+	.name	= "sunxi-musb",
+	.id	= UCLASS_USB,
+	.probe = musb_usb_probe,
+	.remove = musb_usb_remove,
+	.ops	= &musb_usb_ops,
+	.platdata_auto_alloc_size = sizeof(struct usb_platdata),
+	.priv_auto_alloc_size = sizeof(struct musb_host_data),
+};
+#endif
+
+void sunxi_musb_board_init(void)
+{
+#ifdef CONFIG_MUSB_HOST
+	struct udevice *dev;
+
+	/*
+	 * Bind the driver directly for now as musb linux kernel support is
+	 * still pending upstream so our dts files do not have the necessary
+	 * nodes yet. TODO: Remove this as soon as the dts nodes are in place
+	 * and bind by compatible instead.
+	 */
+	device_bind_driver(dm_root(), "sunxi-musb", "sunxi-musb", &dev);
+#else
+	musb_register(&musb_plat, NULL, (void *)SUNXI_USB0_BASE);
+#endif
+}
diff --git a/include/configs/sunxi-common.h b/include/configs/sunxi-common.h
index 9576bc1..5adcc39 100644
--- a/include/configs/sunxi-common.h
+++ b/include/configs/sunxi-common.h
@@ -330,11 +330,6 @@ extern int soft_i2c_gpio_scl;
 #define CONFIG_MUSB_PIO_ONLY
 #endif
 
-#if defined CONFIG_USB_EHCI || defined CONFIG_USB_MUSB_SUNXI
-#define CONFIG_CMD_USB
-#define CONFIG_USB_STORAGE
-#endif
-
 #ifdef CONFIG_USB_KEYBOARD
 #define CONFIG_CONSOLE_MUX
 #define CONFIG_PREBOOT