net: phy: micrel: fix divisor value for KSZ9031 phy skew

The picoseconds to register value divisor(ps_to_regval) should be 60 and not
200. Linux has KSZ9031_PS_TO_REG defined to be 60 as well. 60 is the correct
divisor because the 4-bit skew values are defined from 0x0000(-420ps) to
0xffff(480ps), increments of 60.

For example, a DTS skew value of 420, represents 0ps delay, which should be 0x7.
With the previous divisor of 200, it would result in 0x2, which represents a
-300ps delay.

With this patch, ethernet on the SoCFPGA DE0 Atlas is now able to work with
1Gb ethernet.

References:
http://www.micrel.com/_PDF/Ethernet/datasheets/KSZ9031RNX.pdf -> page 26

Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
Acked-by: Marek Vasut <marex@denx.de>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>

1 files changed, 1 insertions, 1 deletions

diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c
index 446d05a..c3da160 100644
--- a/drivers/net/phy/micrel.c
+++ b/drivers/net/phy/micrel.c
@@ -230,7 +230,7 @@ static int ksz90x1_of_config_group(struct phy_device *phydev,
 {
 	struct udevice *dev = phydev->dev;
 	struct phy_driver *drv = phydev->drv;
-	const int ps_to_regval = 200;
+	const int ps_to_regval = 60;
 	int val[4];
 	int i, changed = 0, offset, max;
 	u16 regval = 0;