arm: Remove da830evm board

This board has not been converted to generic board by the deadline.
Remove it.

Signed-off-by: Simon Glass <sjg@chromium.org>

5 files changed, 0 insertions, 513 deletions

diff --git a/arch/arm/mach-davinci/Kconfig b/arch/arm/mach-davinci/Kconfig
index 8079fab..a8d3e2f 100644
--- a/arch/arm/mach-davinci/Kconfig
+++ b/arch/arm/mach-davinci/Kconfig
@@ -8,9 +8,6 @@ config TARGET_IPAM390
 	bool "IPAM390 board"
 	select SUPPORT_SPL
 
-config TARGET_DA830EVM
-	bool "DA830 EVM board"
-
 config TARGET_DA850EVM
 	bool "DA850 EVM board"
 	select SUPPORT_SPL
diff --git a/board/davinci/da8xxevm/Kconfig b/board/davinci/da8xxevm/Kconfig
index 33bfcc3..7d0de1d 100644
--- a/board/davinci/da8xxevm/Kconfig
+++ b/board/davinci/da8xxevm/Kconfig
@@ -1,16 +1,3 @@
-if TARGET_DA830EVM
-
-config SYS_BOARD
-	default "da8xxevm"
-
-config SYS_VENDOR
-	default "davinci"
-
-config SYS_CONFIG_NAME
-	default "da830evm"
-
-endif
-
 if TARGET_DA850EVM
 
 config SYS_BOARD
diff --git a/board/davinci/da8xxevm/da830evm.c b/board/davinci/da8xxevm/da830evm.c
deleted file mode 100644
index c40587f..0000000
--- a/board/davinci/da8xxevm/da830evm.c
+++ /dev/null
@@ -1,209 +0,0 @@
-/*
- * Copyright (C) 2009 Nick Thompson, GE Fanuc, Ltd. <nick.thompson@gefanuc.com>
- *
- * Base on code from TI. Original Notices follow:
- *
- * (C) Copyright 2008, Texas Instruments, Inc. http://www.ti.com/
- *
- * Modified for DA8xx EVM.
- *
- * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
- *
- * Parts are shamelessly stolen from various TI sources, original copyright
- * follows:
- * -----------------------------------------------------------------
- *
- * Copyright (C) 2004 Texas Instruments.
- *
- * ----------------------------------------------------------------------------
- * SPDX-License-Identifier:	GPL-2.0+
- * ----------------------------------------------------------------------------
- */
-
-#include <common.h>
-#include <i2c.h>
-#include <net.h>
-#include <netdev.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/emac_defs.h>
-#include <asm/arch/pinmux_defs.h>
-#include <asm/io.h>
-#include <nand.h>
-#include <asm/ti-common/davinci_nand.h>
-#include <asm/arch/davinci_misc.h>
-
-#ifdef CONFIG_DAVINCI_MMC
-#include <mmc.h>
-#include <asm/arch/sdmmc_defs.h>
-#endif
-
-DECLARE_GLOBAL_DATA_PTR;
-
-static const struct pinmux_resource pinmuxes[] = {
-#ifdef CONFIG_SPI_FLASH
-	PINMUX_ITEM(spi0_pins_base),
-	PINMUX_ITEM(spi0_pins_scs0),
-	PINMUX_ITEM(spi0_pins_ena),
-#endif
-	PINMUX_ITEM(uart2_pins_txrx),
-	PINMUX_ITEM(i2c0_pins),
-#ifdef CONFIG_USB_DA8XX
-	PINMUX_ITEM(usb_pins),
-#endif
-#ifdef CONFIG_USE_NAND
-	PINMUX_ITEM(emifa_pins),
-	PINMUX_ITEM(emifa_pins_cs0),
-	PINMUX_ITEM(emifa_pins_cs2),
-	PINMUX_ITEM(emifa_pins_cs3),
-#endif
-#if defined(CONFIG_DRIVER_TI_EMAC)
-	PINMUX_ITEM(emac_pins_rmii),
-	PINMUX_ITEM(emac_pins_mdio),
-	PINMUX_ITEM(emac_pins_rmii_clk_source),
-#endif
-#ifdef CONFIG_DAVINCI_MMC
-	PINMUX_ITEM(mmc0_pins_8bit)
-#endif
-};
-
-static const struct lpsc_resource lpsc[] = {
-	{ DAVINCI_LPSC_AEMIF },	/* NAND, NOR */
-	{ DAVINCI_LPSC_SPI0 },	/* Serial Flash */
-	{ DAVINCI_LPSC_EMAC },	/* image download */
-	{ DAVINCI_LPSC_UART2 },	/* console */
-	{ DAVINCI_LPSC_GPIO },
-#ifdef CONFIG_DAVINCI_MMC
-	{ DAVINCI_LPSC_MMC_SD },
-#endif
-
-};
-
-#ifdef CONFIG_DAVINCI_MMC
-static struct davinci_mmc mmc_sd0 = {
-	.reg_base = (struct davinci_mmc_regs *)DAVINCI_MMC_SD0_BASE,
-	.host_caps = MMC_MODE_8BIT,
-	.voltages = MMC_VDD_32_33 | MMC_VDD_33_34,
-	.version = MMC_CTLR_VERSION_2,
-};
-
-int board_mmc_init(bd_t *bis)
-{
-	mmc_sd0.input_clk = clk_get(DAVINCI_MMCSD_CLKID);
-
-	printf("%x\n", mmc_sd0.input_clk);
-
-	/* Add slot-0 to mmc subsystem */
-	return davinci_mmc_init(bis, &mmc_sd0);
-}
-#endif
-
-int board_init(void)
-{
-#ifndef CONFIG_USE_IRQ
-	irq_init();
-#endif
-
-#ifdef CONFIG_NAND_DAVINCI
-	/* EMIFA 100MHz clock select */
-	writel(readl(&davinci_syscfg_regs->cfgchip3) & ~2,
-	       &davinci_syscfg_regs->cfgchip3);
-	/* NAND CS setup */
-	writel((DAVINCI_ABCR_WSETUP(0) |
-		DAVINCI_ABCR_WSTROBE(2) |
-		DAVINCI_ABCR_WHOLD(0) |
-		DAVINCI_ABCR_RSETUP(0) |
-		DAVINCI_ABCR_RSTROBE(2) |
-		DAVINCI_ABCR_RHOLD(0) |
-		DAVINCI_ABCR_TA(2) |
-		DAVINCI_ABCR_ASIZE_8BIT),
-	       &davinci_emif_regs->ab2cr);
-#endif
-
-	/* arch number of the board */
-	gd->bd->bi_arch_number = MACH_TYPE_DAVINCI_DA830_EVM;
-
-	/* address of boot parameters */
-	gd->bd->bi_boot_params = LINUX_BOOT_PARAM_ADDR;
-
-	/*
-	 * Power on required peripherals
-	 * ARM does not have access by default to PSC0 and PSC1
-	 * assuming here that the DSP bootloader has set the IOPU
-	 * such that PSC access is available to ARM
-	 */
-	if (da8xx_configure_lpsc_items(lpsc, ARRAY_SIZE(lpsc)))
-		return 1;
-
-	/* setup the SUSPSRC for ARM to control emulation suspend */
-	writel(readl(&davinci_syscfg_regs->suspsrc) &
-	       ~(DAVINCI_SYSCFG_SUSPSRC_EMAC | DAVINCI_SYSCFG_SUSPSRC_I2C |
-		 DAVINCI_SYSCFG_SUSPSRC_SPI0 | DAVINCI_SYSCFG_SUSPSRC_TIMER0 |
-		 DAVINCI_SYSCFG_SUSPSRC_UART2),
-	       &davinci_syscfg_regs->suspsrc);
-
-	/* configure pinmux settings */
-	if (davinci_configure_pin_mux_items(pinmuxes, ARRAY_SIZE(pinmuxes)))
-		return 1;
-
-	/* enable the console UART */
-	writel((DAVINCI_UART_PWREMU_MGMT_FREE | DAVINCI_UART_PWREMU_MGMT_URRST |
-		DAVINCI_UART_PWREMU_MGMT_UTRST),
-	       &davinci_uart2_ctrl_regs->pwremu_mgmt);
-
-	return(0);
-}
-
-
-#ifdef CONFIG_NAND_DAVINCI
-int board_nand_init(struct nand_chip *nand)
-{
-	davinci_nand_init(nand);
-
-	return 0;
-}
-#endif
-
-#if defined(CONFIG_DRIVER_TI_EMAC)
-
-#define PHY_SW_I2C_ADDR	0x5f /* Address of PHY on i2c bus */
-
-/*
- * Initializes on-board ethernet controllers.
- */
-int board_eth_init(bd_t *bis)
-{
-	u_int8_t mac_addr[6];
-	u_int8_t switch_start_cmd[2] = { 0x01, 0x23 };
-	struct eth_device *dev;
-
-	/* Read Ethernet MAC address from EEPROM */
-	if (dvevm_read_mac_address(mac_addr))
-		/* set address env if not already set */
-		davinci_sync_env_enetaddr(mac_addr);
-
-	/* read the address back from env */
-	if (!eth_getenv_enetaddr("ethaddr", mac_addr))
-		return -1;
-
-	/* enable the Ethernet switch in the 3 port PHY */
-	if (i2c_write(PHY_SW_I2C_ADDR, 0, 0,
-			switch_start_cmd, sizeof(switch_start_cmd))) {
-		printf("Ethernet switch start failed!\n");
-		return -1;
-	}
-
-	/* finally, initialise the driver */
-	if (!davinci_emac_initialize()) {
-		printf("Error: Ethernet init failed!\n");
-		return -1;
-	}
-
-	dev = eth_get_dev();
-
-	/* provide the resulting addr to the driver */
-	memcpy(dev->enetaddr, mac_addr, 6);
-	dev->write_hwaddr(dev);
-
-	return 0;
-}
-#endif /* CONFIG_DRIVER_TI_EMAC */
diff --git a/configs/da830evm_defconfig b/configs/da830evm_defconfig
deleted file mode 100644
index 3dda857..0000000
--- a/configs/da830evm_defconfig
+++ /dev/null
@@ -1,9 +0,0 @@
-CONFIG_ARM=y
-CONFIG_ARCH_DAVINCI=y
-CONFIG_TARGET_DA830EVM=y
-CONFIG_SYS_PROMPT="U-Boot > "
-# CONFIG_CMD_IMLS is not set
-# CONFIG_CMD_FLASH is not set
-# CONFIG_CMD_FPGA is not set
-# CONFIG_CMD_SETEXPR is not set
-CONFIG_SPI_FLASH=y
diff --git a/include/configs/da830evm.h b/include/configs/da830evm.h
deleted file mode 100644
index 7ac3224..0000000
--- a/include/configs/da830evm.h
+++ /dev/null
@@ -1,279 +0,0 @@
-/*
- * Copyright (C) 2008 Texas Instruments, Inc <www.ti.com>
- *
- * Based on davinci_dvevm.h. Original Copyrights follow:
- *
- * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * Board
- */
-#define CONFIG_DRIVER_TI_EMAC
-#define CONFIG_USE_SPIFLASH
-
-/*
- * SoC Configuration
- */
-#define CONFIG_MACH_DAVINCI_DA830_EVM
-#define CONFIG_SOC_DA8XX		/* TI DA8xx SoC */
-#define CONFIG_SOC_DA830		/* TI DA830 SoC */
-#define CONFIG_SYS_CLK_FREQ		clk_get(DAVINCI_ARM_CLKID)
-#define CONFIG_SYS_OSCIN_FREQ		24000000
-#define CONFIG_SYS_TIMERBASE		DAVINCI_TIMER0_BASE
-#define CONFIG_SYS_HZ_CLOCK		clk_get(DAVINCI_AUXCLK_CLKID)
-#define CONFIG_SKIP_LOWLEVEL_INIT
-#define CONFIG_SYS_TEXT_BASE		0xc1080000
-
-/*
- * Memory Info
- */
-#define CONFIG_SYS_MALLOC_LEN	(0x10000 + 1*1024*1024) /* malloc() len */
-#define PHYS_SDRAM_1			0xc0000000 /* SDRAM Start */
-#define CONFIG_SYS_MEMTEST_START	(PHYS_SDRAM_1 + 0x2000000)
-#define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_MEMTEST_START + \
-						(32 << 20))
-#define CONFIG_NR_DRAM_BANKS	1 /* we have 1 bank of DRAM */
-
-/*
- * Serial Driver info
- */
-#define CONFIG_SYS_NS16550
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_REG_SIZE	-4	/* NS16550 register size */
-#define CONFIG_SYS_NS16550_COM1	DAVINCI_UART2_BASE /* Base address of UART2 */
-#define CONFIG_SYS_NS16550_CLK	clk_get(DAVINCI_UART2_CLKID)
-#define CONFIG_CONS_INDEX	1		/* use UART0 for console */
-#define CONFIG_BAUDRATE		115200		/* Default baud rate */
-
-/*
- * I2C Configuration
- */
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_DAVINCI
-#define CONFIG_SYS_DAVINCI_I2C_SPEED     25000 /* 100Kbps won't work, H/W bug */
-#define CONFIG_SYS_DAVINCI_I2C_SLAVE     10 /* Bogus, master-only in U-Boot */
-
-/*
- * I2C EEPROM definitions for catalyst 24W256 EEPROM chip
- */
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN	2
-#define CONFIG_SYS_I2C_EEPROM_ADDR	0x50
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS	6
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	20
-
-/*
- * Network & Ethernet Configuration
- */
-#ifdef CONFIG_DRIVER_TI_EMAC
-#define CONFIG_MII
-#define CONFIG_BOOTP_DNS
-#define CONFIG_BOOTP_DNS2
-#define CONFIG_BOOTP_SEND_HOSTNAME
-#define CONFIG_NET_RETRY_COUNT	10
-#endif
-
-/*
- * Flash & Environment
- */
-#ifdef CONFIG_USE_NAND
-#undef CONFIG_ENV_IS_IN_FLASH
-#define CONFIG_NAND_DAVINCI
-#define CONFIG_SYS_NO_FLASH
-#define CONFIG_ENV_IS_IN_NAND		/* U-Boot env in NAND Flash  */
-#define CONFIG_ENV_OFFSET		(512 << 10)
-#define CONFIG_ENV_SIZE			(10 << 10) /* 10KB */
-#define CONFIG_SYS_NAND_USE_FLASH_BBT
-#define CONFIG_SYS_NAND_4BIT_HW_ECC_OOBFIRST
-#define CONFIG_SYS_NAND_PAGE_2K
-#define CONFIG_SYS_NAND_CS		3
-#define CONFIG_SYS_NAND_BASE		DAVINCI_ASYNC_EMIF_DATA_CE3_BASE
-#define CONFIG_SYS_NAND_PAGE_2K
-#define CONFIG_SYS_NAND_MASK_CLE		0x10
-#define CONFIG_SYS_NAND_MASK_ALE		0x8
-#define CONFIG_SYS_MAX_NAND_DEVICE	1 /* Max number of NAND devices */
-#endif
-
-#ifdef CONFIG_USE_NOR
-#define CONFIG_ENV_IS_IN_FLASH
-#undef CONFIG_SYS_NO_FLASH
-#define CONFIG_SYS_FLASH_CFI_DRIVER
-#define CONFIG_SYS_FLASH_CFI
-#define CONFIG_SYS_MAX_FLASH_BANKS	1 /* max number of flash banks */
-#define CONFIG_SYS_FLASH_SECT_SZ	(64 << 10) /* 64KB */
-#define CONFIG_ENV_OFFSET		(CONFIG_SYS_FLASH_SECT_SZ*3)
-#define CONFIG_SYS_FLASH_BASE		DAVINCI_ASYNC_EMIF_DATA_CE2_BASE
-#define PHYS_FLASH_SIZE			(32 << 20) /* Flash size 32MB */
-#define CONFIG_SYS_MAX_FLASH_SECT (PHYS_FLASH_SIZE/CONFIG_SYS_FLASH_SECT_SZ)
-#define CONFIG_ENV_SECT_SIZE		CONFIG_SYS_FLASH_SECT_SZ
-#define CONFIG_SYS_FLASH_SPL_ACCESS
-#endif
-
-#ifdef CONFIG_USE_SPIFLASH
-#undef CONFIG_ENV_IS_IN_FLASH
-#undef CONFIG_ENV_IS_IN_NAND
-#define CONFIG_ENV_IS_IN_SPI_FLASH
-#define CONFIG_ENV_SIZE			(16 << 10)
-#define CONFIG_ENV_OFFSET		(256 << 10)
-#define CONFIG_ENV_SECT_SIZE		4096
-#define CONFIG_SYS_NO_FLASH
-#define CONFIG_SPI
-#define CONFIG_SPI_FLASH_WINBOND
-#define CONFIG_DAVINCI_SPI
-#define CONFIG_SYS_SPI_BASE		DAVINCI_SPI0_BASE
-#define CONFIG_SYS_SPI_CLK		clk_get(DAVINCI_SPI0_CLKID)
-#define CONFIG_SF_DEFAULT_SPEED		30000000
-#define CONFIG_ENV_SPI_MAX_HZ		CONFIG_SF_DEFAULT_SPEED
-#endif
-
-/*
- * USB configuration
- */
-#define CONFIG_USB_DA8XX	/* Platform hookup to MUSB controller */
-#define CONFIG_USB_MUSB_HCD
-
-/*
- * U-Boot general configuration
- */
-#undef CONFIG_MISC_INIT_R
-#undef CONFIG_BOOTDELAY
-#define CONFIG_BOOTFILE		"uImage" /* Boot file name */
-#define CONFIG_SYS_CBSIZE	1024 /* Console I/O Buffer Size	*/
-#define CONFIG_SYS_PBSIZE	(CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
-#define CONFIG_SYS_MAXARGS	16 /* max number of command args */
-#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE /* Boot Args Buffer Size */
-#define CONFIG_SYS_LOAD_ADDR	(PHYS_SDRAM_1 + 0x700000)
-#define CONFIG_VERSION_VARIABLE
-#define CONFIG_AUTO_COMPLETE	/* Won't work with hush so far, may be later */
-#define CONFIG_SYS_HUSH_PARSER
-#define CONFIG_CMDLINE_EDITING
-#define CONFIG_SYS_LONGHELP
-#define CONFIG_CRC32_VERIFY
-#define CONFIG_MX_CYCLIC
-
-/*
- * Linux Information
- */
-#define LINUX_BOOT_PARAM_ADDR	(PHYS_SDRAM_1 + 0x100)
-#define CONFIG_CMDLINE_TAG
-#define CONFIG_SETUP_MEMORY_TAGS
-#define CONFIG_BOOTARGS		"mem=32M console=ttyS2,115200n8 root=/dev/mtdblock/2 rw noinitrd ip=dhcp"
-#define CONFIG_BOOTCOMMAND	""
-#define CONFIG_BOOTDELAY	3
-
-/*
- * U-Boot commands
- */
-#define CONFIG_CMD_ENV
-#define CONFIG_CMD_ASKENV
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_DIAG
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_SAVES
-
-#ifdef CONFIG_CMD_BDI
-#define CONFIG_CLOCKS
-#endif
-
-#ifndef CONFIG_DRIVER_TI_EMAC
-#undef CONFIG_CMD_DHCP
-#undef CONFIG_CMD_MII
-#undef CONFIG_CMD_PING
-#endif
-
-#ifdef CONFIG_USE_NAND
-#define CONFIG_CMD_NAND
-#define CONFIG_CMD_MTDPARTS
-#define CONFIG_MTD_PARTITIONS
-#define CONFIG_MTD_DEVICE
-#endif
-
-#ifdef CONFIG_USE_SPIFLASH
-#define CONFIG_CMD_SPI
-#define CONFIG_CMD_SF
-#endif
-
-/* SD/MMC configuration */
-#ifndef CONFIG_USE_NAND
-#define CONFIG_MMC
-#define CONFIG_DAVINCI_MMC_SD1
-#define CONFIG_GENERIC_MMC
-#define CONFIG_DAVINCI_MMC
-#endif
-
-/*
- * Enable MMC commands only when
- * MMC support is present
- */
-#if defined(CONFIG_MMC) || defined(CONFIG_USB_DA8XX)
-#define CONFIG_DOS_PARTITION	/* include support for FAT/storage */
-#define CONFIG_CMD_FAT		/* include support for FAT cmd */
-#endif
-
-#ifdef CONFIG_MMC
-#define CONFIG_CMD_MMC
-#define CONFIG_CMD_EXT2
-#endif
-
-#if !defined(CONFIG_USE_NAND) && \
-	!defined(CONFIG_USE_NOR) && \
-	!defined(CONFIG_USE_SPIFLASH)
-#define CONFIG_ENV_IS_NOWHERE
-#define CONFIG_SYS_NO_FLASH
-#define CONFIG_ENV_SIZE		(16 << 10)
-#undef CONFIG_CMD_ENV
-#endif
-
-#ifdef CONFIG_USB_DA8XX
-
-#ifdef CONFIG_USB_MUSB_HCD		/* include support for usb host */
-#define CONFIG_CMD_USB		/* include support for usb cmd */
-
-#define CONFIG_USB_STORAGE	/* MSC class support */
-#define CONFIG_CMD_STORAGE	/* inclue support for usb-storage cmd */
-
-#ifdef CONFIG_USB_KEYBOARD	/* HID class support */
-#define CONFIG_SYS_USB_EVENT_POLL
-#define CONFIG_PREBOOT "usb start"
-#endif /* CONFIG_USB_KEYBOARD */
-
-#endif /* CONFIG_USB_MUSB_HCD */
-
-#ifdef CONFIG_USB_MUSB_UDC
-/* USB device configuration */
-#define CONFIG_USB_DEVICE		1
-#define CONFIG_USB_TTY			1
-#define CONFIG_SYS_CONSOLE_IS_IN_ENV	1
-/* Change these to suit your needs */
-#define CONFIG_USBD_VENDORID		0x0451
-#define CONFIG_USBD_PRODUCTID		0x5678
-#define CONFIG_USBD_MANUFACTURER	"Texas Instruments"
-#define CONFIG_USBD_PRODUCT_NAME	"DA830EVM"
-#endif /* CONFIG_USB_MUSB_UDC */
-
-#endif /* CONFIG_USB_DA8XX */
-
-#ifdef CONFIG_MTD_PARTITIONS
-#define MTDIDS_DEFAULT		"nand0=davinci_nand.1"
-#define PART_BOOT		"512k(bootloader)ro,"
-#define PART_PARAMS		"512k(params)ro,"
-#define PART_KERNEL		"4m(kernel),"
-#define PART_REST		"-(filesystem)"
-#define MTDPARTS_DEFAULT        \
-	"mtdparts=davinci_nand.1:" PART_BOOT PART_PARAMS PART_KERNEL PART_REST
-#endif
-
-#define CONFIG_MAX_RAM_BANK_SIZE (512 << 20) /* max size from SPRS586*/
-
-/* additions for new relocation code, must be added to all boards */
-#define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM_1
-#define CONFIG_SYS_INIT_SP_ADDR		\
-	(CONFIG_SYS_SDRAM_BASE + 0x1000 - GENERATED_GBL_DATA_SIZE)
-
-#endif /* __CONFIG_H */