arm: mvebu: Add support for the Armada XP theadorable board

This patch adds support for the Armada XP (MV78260) based theadorable
board. Its equipped with onboard DDR3, UART, ethernet, I2C, SPI NOR,
LCD and SATA (SSD) interfaces / devices.

Two defconfigs are added:

theadorable_defconfig:
The production U-Boot version with a stripped down drivers and feature
list. This removes networking, USB and PCI support.

theadorable_debug_defconfig:
The debugging / testing U-Boot version with full support for all drivers.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Luka Perkov <luka.perkov@sartura.hr>
Signed-off-by: Stefan Roese <sr@denx.de>

10 files changed, 572 insertions, 1 deletions

diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 1c7d359..203abb2 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -53,7 +53,8 @@ dtb-$(CONFIG_ARCH_MVEBU) +=			\
 	armada-388-gp.dtb			\
 	armada-xp-gp.dtb			\
 	armada-xp-maxbcm.dtb			\
-	armada-xp-synology-ds414.dtb
+	armada-xp-synology-ds414.dtb		\
+	armada-xp-theadorable.dtb
 
 dtb-$(CONFIG_ARCH_UNIPHIER) += \
 	uniphier-ph1-ld4-ref.dtb \
diff --git a/arch/arm/dts/armada-xp-theadorable.dts b/arch/arm/dts/armada-xp-theadorable.dts
new file mode 100644
index 0000000..cf1be2a
--- /dev/null
+++ b/arch/arm/dts/armada-xp-theadorable.dts
@@ -0,0 +1,143 @@
+/*
+ * Device Tree file for Marvell Armada XP theadorable board
+ *
+ * Copyright (C) 2013-2014 Marvell
+ *
+ * Lior Amsalem <alior@marvell.com>
+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Note: this Device Tree assumes that the bootloader has remapped the
+ * internal registers to 0xf1000000 (instead of the default
+ * 0xd0000000). The 0xf1000000 is the default used by the recent,
+ * DT-capable, U-Boot bootloaders provided by Marvell. Some earlier
+ * boards were delivered with an older version of the bootloader that
+ * left internal registers mapped at 0xd0000000. If you are in this
+ * situation, you should either update your bootloader (preferred
+ * solution) or the below Device Tree should be adjusted.
+ */
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include "armada-xp-mv78260.dtsi"
+
+/ {
+	model = "Marvell Armada XP theadorable";
+	compatible = "marvell,armadaxp-mv78260", "marvell,armadaxp", "marvell,armada-370-xp";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	aliases {
+		spi0 = &spi0;
+		ethernet0 = &eth0;
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x00000000 0x00000000 0x80000000>;
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000
+			  MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
+			  MBUS_ID(0x01, 0x2f) 0 0 0xf0000000 0x1000000>;
+
+		internal-regs {
+			serial@12000 {
+				status = "okay";
+				u-boot,dm-pre-reloc;
+			};
+
+			serial@12100 {
+				status = "okay";
+			};
+
+			serial@12200 {
+				status = "okay";
+			};
+
+			serial@12300 {
+				status = "okay";
+			};
+
+			sata@a0000 {
+				nr-ports = <2>;
+				status = "okay";
+			};
+
+			mdio {
+				phy0: ethernet-phy@0 {
+					reg = <0>;
+				};
+			};
+
+			ethernet@70000 {
+				status = "okay";
+				phy = <&phy0>;
+				phy-mode = "sgmii";
+			};
+
+			usb@50000 {
+				status = "okay";
+			};
+
+			usb@51000 {
+				status = "okay";
+			};
+
+			spi0: spi@10600 {
+				status = "okay";
+				u-boot,dm-pre-reloc;
+
+				spi-flash@0 {
+					u-boot,dm-pre-reloc;
+					#address-cells = <1>;
+					#size-cells = <1>;
+					compatible = "n25q128a13", "jedec,spi-nor";
+					reg = <0>; /* Chip select 0 */
+					spi-max-frequency = <27777777>;
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/mach-mvebu/Kconfig b/arch/arm/mach-mvebu/Kconfig
index b962846..96a3313 100644
--- a/arch/arm/mach-mvebu/Kconfig
+++ b/arch/arm/mach-mvebu/Kconfig
@@ -46,6 +46,10 @@ config TARGET_MAXBCM
 	bool "Support maxbcm"
 	select MV78460
 
+config TARGET_THEADORABLE
+	bool "Support theadorable Armada XP"
+	select MV78260
+
 endchoice
 
 config SYS_BOARD
@@ -54,6 +58,7 @@ config SYS_BOARD
 	default "db-mv784mp-gp" if TARGET_DB_MV784MP_GP
 	default "ds414" if TARGET_DS414
 	default "maxbcm" if TARGET_MAXBCM
+	default "theadorable" if TARGET_THEADORABLE
 
 config SYS_CONFIG_NAME
 	default "clearfog" if TARGET_CLEARFOG
@@ -61,6 +66,7 @@ config SYS_CONFIG_NAME
 	default "db-mv784mp-gp" if TARGET_DB_MV784MP_GP
 	default "ds414" if TARGET_DS414
 	default "maxbcm" if TARGET_MAXBCM
+	default "theadorable" if TARGET_THEADORABLE
 
 config SYS_VENDOR
 	default "Marvell" if TARGET_DB_MV784MP_GP
diff --git a/board/theadorable/MAINTAINERS b/board/theadorable/MAINTAINERS
new file mode 100644
index 0000000..5ae6b64
--- /dev/null
+++ b/board/theadorable/MAINTAINERS
@@ -0,0 +1,7 @@
+THEADORABLE BOARD
+M:	Stefan Roese <sr@denx.de>
+S:	Maintained
+F:	board/theadorable/
+F:	include/configs/theadorable.h
+F:	configs/theadorable_debug_defconfig
+F:	configs/theadorable_defconfig
diff --git a/board/theadorable/Makefile b/board/theadorable/Makefile
new file mode 100644
index 0000000..9d5b39e
--- /dev/null
+++ b/board/theadorable/Makefile
@@ -0,0 +1,7 @@
+#
+# Copyright (C) 2015-2016 Stefan Roese <sr@denx.de>
+#
+# SPDX-License-Identifier:	GPL-2.0+
+#
+
+obj-y	:= theadorable.o
diff --git a/board/theadorable/kwbimage.cfg b/board/theadorable/kwbimage.cfg
new file mode 100644
index 0000000..4f3b7b2
--- /dev/null
+++ b/board/theadorable/kwbimage.cfg
@@ -0,0 +1,12 @@
+#
+# Copyright (C) 2015-2016 Stefan Roese <sr@denx.de>
+#
+
+# Armada XP uses version 1 image format
+VERSION		1
+
+# Boot Media configurations
+BOOT_FROM	spi
+
+# Binary Header (bin_hdr) with DDR3 training code
+BINARY spl/u-boot-spl-dtb.bin 0000005b 00000068
diff --git a/board/theadorable/theadorable.c b/board/theadorable/theadorable.c
new file mode 100644
index 0000000..0e23265
--- /dev/null
+++ b/board/theadorable/theadorable.c
@@ -0,0 +1,171 @@
+/*
+ * Copyright (C) 2015-2016 Stefan Roese <sr@denx.de>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/soc.h>
+#ifdef CONFIG_NET
+#include <netdev.h>
+#endif
+
+#include "../drivers/ddr/marvell/axp/ddr3_hw_training.h"
+#include "../arch/arm/mach-mvebu/serdes/axp/high_speed_env_spec.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#define THEADORABLE_GPP_OUT_ENA_LOW	0x00336780
+#define THEADORABLE_GPP_OUT_ENA_MID	0x00003cf0
+#define THEADORABLE_GPP_OUT_ENA_HIGH	(~(0x0))
+
+#define THEADORABLE_GPP_OUT_VAL_LOW	0x2c0c983f
+#define THEADORABLE_GPP_OUT_VAL_MID	0x0007000c
+#define THEADORABLE_GPP_OUT_VAL_HIGH	0x00000000
+
+/* DDR3 static configuration */
+static MV_DRAM_MC_INIT ddr3_theadorable[MV_MAX_DDR3_STATIC_SIZE] = {
+	{0x00001400, 0x7301ca28},	/* DDR SDRAM Configuration Register */
+	{0x00001404, 0x30000800},	/* Dunit Control Low Register */
+	{0x00001408, 0x44149887},	/* DDR SDRAM Timing (Low) Register */
+	{0x0000140C, 0x38d93fc7},	/* DDR SDRAM Timing (High) Register */
+	{0x00001410, 0x1b100001},	/* DDR SDRAM Address Control Register */
+	{0x00001424, 0x0000f3ff},	/* Dunit Control High Register */
+	{0x00001428, 0x000f8830},	/* ODT Timing (Low) Register */
+	{0x0000142C, 0x014c50f4},	/* DDR3 Timing Register */
+	{0x0000147C, 0x0000c671},	/* ODT Timing (High) Register */
+
+	{0x00001494, 0x00010000},	/* DDR SDRAM ODT Control (Low) Reg */
+	{0x0000149C, 0x00000001},	/* DDR Dunit ODT Control Register */
+	{0x000014A0, 0x00000001},	/* DRAM FIFO Control Register */
+	{0x000014A8, 0x00000101},	/* AXI Control Register */
+
+	/*
+	 * DO NOT Modify - Open Mbus Window - 2G - Mbus is required for the
+	 * training sequence
+	 */
+	{0x000200e8, 0x3fff0e01},
+	{0x00020184, 0x3fffffe0},	/* Close fast path Window to - 2G */
+
+	{0x0001504, 0x7fffffe1},	/* CS0 Size */
+	{0x000150C, 0x00000000},	/* CS1 Size */
+	{0x0001514, 0x00000000},	/* CS2 Size */
+	{0x000151C, 0x00000000},	/* CS3 Size */
+
+	{0x00020220, 0x00000007},	/* Reserved */
+
+	{0x00001538, 0x00000009},	/* Read Data Sample Delays Register */
+	{0x0000153C, 0x00000009},	/* Read Data Ready Delay Register */
+
+	{0x000015D0, 0x00000650},	/* MR0 */
+	{0x000015D4, 0x00000044},	/* MR1 */
+	{0x000015D8, 0x00000010},	/* MR2 */
+	{0x000015DC, 0x00000000},	/* MR3 */
+	{0x000015E0, 0x00000001},
+	{0x000015E4, 0x00203c18},	/* ZQDS Configuration Register */
+	{0x000015EC, 0xf800a225},	/* DDR PHY */
+
+	/* Recommended Settings from Marvell for 4 x 16 bit devices: */
+	{0x000014C0, 0x192424c9},	/* DRAM addr and Ctrl Driving Strenght*/
+	{0x000014C4, 0x0aaa24c9},	/* DRAM Data and DQS Driving Strenght */
+
+	{0x0, 0x0}
+};
+
+static MV_DRAM_MODES board_ddr_modes[MV_DDR3_MODES_NUMBER] = {
+	{"theadorable_1333-667", 0x3, 0x5, 0x0, A0, ddr3_theadorable,  NULL},
+};
+
+extern MV_SERDES_CHANGE_M_PHY serdes_change_m_phy[];
+
+/*
+ * Lane0 - PCIE0.0 X1 (to WIFI Module)
+ * Lane5 - SATA0
+ * Lane6 - SATA1
+ * Lane7 - SGMII0 (to Ethernet Phy)
+ * Lane8-11 - PCIE2.0 X4 (to PEX Switch)
+ * all other lanes are disabled
+ */
+MV_BIN_SERDES_CFG theadorable_serdes_cfg[] = {
+	{ MV_PEX_ROOT_COMPLEX, 0x22200001, 0x00001111,
+	  { PEX_BUS_MODE_X1, PEX_BUS_DISABLED, PEX_BUS_MODE_X4,
+	    PEX_BUS_DISABLED },
+	  0x0060, serdes_change_m_phy
+	},
+};
+
+MV_DRAM_MODES *ddr3_get_static_ddr_mode(void)
+{
+	/* Only one mode supported for this board */
+	return &board_ddr_modes[0];
+}
+
+MV_BIN_SERDES_CFG *board_serdes_cfg_get(u8 pex_mode)
+{
+	return &theadorable_serdes_cfg[0];
+}
+
+int board_early_init_f(void)
+{
+	/* Configure MPP */
+	writel(0x00000000, MVEBU_MPP_BASE + 0x00);
+	writel(0x03300000, MVEBU_MPP_BASE + 0x04);
+	writel(0x00000033, MVEBU_MPP_BASE + 0x08);
+	writel(0x00000000, MVEBU_MPP_BASE + 0x0c);
+	writel(0x11110000, MVEBU_MPP_BASE + 0x10);
+	writel(0x00221100, MVEBU_MPP_BASE + 0x14);
+	writel(0x00000000, MVEBU_MPP_BASE + 0x18);
+	writel(0x00000000, MVEBU_MPP_BASE + 0x1c);
+	writel(0x00000000, MVEBU_MPP_BASE + 0x20);
+
+	/* Configure GPIO */
+	writel(THEADORABLE_GPP_OUT_VAL_LOW, MVEBU_GPIO0_BASE + 0x00);
+	writel(THEADORABLE_GPP_OUT_ENA_LOW, MVEBU_GPIO0_BASE + 0x04);
+	writel(THEADORABLE_GPP_OUT_VAL_MID, MVEBU_GPIO1_BASE + 0x00);
+	writel(THEADORABLE_GPP_OUT_ENA_MID, MVEBU_GPIO1_BASE + 0x04);
+	writel(THEADORABLE_GPP_OUT_VAL_HIGH, MVEBU_GPIO2_BASE + 0x00);
+	writel(THEADORABLE_GPP_OUT_ENA_HIGH, MVEBU_GPIO2_BASE + 0x04);
+
+	return 0;
+}
+
+int board_init(void)
+{
+	/* adress of boot parameters */
+	gd->bd->bi_boot_params = mvebu_sdram_bar(0) + 0x100;
+
+	return 0;
+}
+
+int checkboard(void)
+{
+	puts("Board: theadorable\n");
+
+	return 0;
+}
+
+#ifdef CONFIG_NET
+int board_eth_init(bd_t *bis)
+{
+	cpu_eth_init(bis); /* Built in controller(s) come first */
+	return pci_eth_init(bis);
+}
+#endif
+
+int board_video_init(void)
+{
+	struct mvebu_lcd_info lcd_info;
+
+	/* Reserved memory area via CONFIG_SYS_MEM_TOP_HIDE */
+	lcd_info.fb_base	= gd->ram_size;
+	lcd_info.x_res		= 240;
+	lcd_info.x_fp		= 1;
+	lcd_info.x_bp		= 45;
+	lcd_info.y_res		= 320;
+	lcd_info.y_fp		= 1;
+	lcd_info.y_bp		= 3;
+
+	return mvebu_lcd_register_init(&lcd_info);
+}
diff --git a/configs/theadorable_debug_defconfig b/configs/theadorable_debug_defconfig
new file mode 100644
index 0000000..fbed23c
--- /dev/null
+++ b/configs/theadorable_debug_defconfig
@@ -0,0 +1,28 @@
+CONFIG_ARM=y
+CONFIG_ARCH_MVEBU=y
+CONFIG_SYS_MALLOC_F_LEN=0x2000
+CONFIG_TARGET_THEADORABLE=y
+CONFIG_DEFAULT_DEVICE_TREE="armada-xp-theadorable"
+# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL=y
+# CONFIG_CMD_IMLS is not set
+# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_SF=y
+CONFIG_CMD_USB=y
+# CONFIG_CMD_FPGA is not set
+# CONFIG_CMD_SETEXPR is not set
+CONFIG_NET_RANDOM_ETHADDR=y
+CONFIG_SPL_OF_TRANSLATE=y
+CONFIG_SPI_FLASH=y
+CONFIG_SPI_FLASH_MACRONIX=y
+CONFIG_SPI_FLASH_STMICRO=y
+CONFIG_DEBUG_UART=y
+CONFIG_DEBUG_UART_BASE=0xd0012000
+CONFIG_DEBUG_UART_CLOCK=250000000
+CONFIG_DEBUG_UART_SHIFT=2
+CONFIG_SYS_NS16550=y
+CONFIG_USB=y
+CONFIG_DM_USB=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_STORAGE=y
+CONFIG_VIDEO_MVEBU=y
diff --git a/configs/theadorable_defconfig b/configs/theadorable_defconfig
new file mode 100644
index 0000000..cce4669
--- /dev/null
+++ b/configs/theadorable_defconfig
@@ -0,0 +1,26 @@
+CONFIG_ARM=y
+CONFIG_ARCH_MVEBU=y
+CONFIG_SYS_MALLOC_F_LEN=0x2000
+CONFIG_TARGET_THEADORABLE=y
+CONFIG_DEFAULT_DEVICE_TREE="armada-xp-theadorable"
+# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL=y
+# CONFIG_CMD_IMLS is not set
+# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_SF=y
+# CONFIG_CMD_FPGA is not set
+# CONFIG_CMD_SETEXPR is not set
+# CONFIG_CMD_NET is not set
+# CONFIG_CMD_NFS is not set
+CONFIG_SPL_OF_TRANSLATE=y
+CONFIG_SPI_FLASH=y
+CONFIG_SPI_FLASH_MACRONIX=y
+CONFIG_SPI_FLASH_STMICRO=y
+CONFIG_DEBUG_UART=y
+CONFIG_DEBUG_UART_BASE=0xd0012000
+CONFIG_DEBUG_UART_CLOCK=250000000
+CONFIG_DEBUG_UART_SHIFT=2
+CONFIG_SYS_NS16550=y
+CONFIG_VIDEO_MVEBU=y
+CONFIG_REGEX=y
+CONFIG_LIB_RAND=y
diff --git a/include/configs/theadorable.h b/include/configs/theadorable.h
new file mode 100644
index 0000000..cd9d6b6
--- /dev/null
+++ b/include/configs/theadorable.h
@@ -0,0 +1,170 @@
+/*
+ * Copyright (C) 2015-2016 Stefan Roese <sr@denx.de>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef _CONFIG_THEADORABLE_H
+#define _CONFIG_THEADORABLE_H
+
+/*
+ * High Level Configuration Options (easy to change)
+ */
+#define CONFIG_DISPLAY_BOARDINFO_LATE
+
+/*
+ * TEXT_BASE needs to be below 16MiB, since this area is scrubbed
+ * for DDR ECC byte filling in the SPL before loading the main
+ * U-Boot into it.
+ */
+#define	CONFIG_SYS_TEXT_BASE	0x00800000
+#define CONFIG_SYS_TCLK		250000000	/* 250MHz */
+
+/*
+ * Commands configuration
+ */
+#define CONFIG_CMD_BOOTZ
+#define CONFIG_CMD_CACHE
+#define CONFIG_CMD_ENV
+#define CONFIG_CMD_EXT2
+#define CONFIG_CMD_EXT4
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_FS_GENERIC
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_SATA
+#define CONFIG_CMD_TIME
+
+/*
+ * The debugging version enables USB support via defconfig.
+ * This version should also enable all other non-production
+ * interfaces / features.
+ */
+#ifdef CONFIG_USB
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_SPI
+#define CONFIG_CMD_TFTPPUT
+#endif
+
+/* I2C */
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_MVTWSI
+#define CONFIG_I2C_MVTWSI_BASE0		MVEBU_TWSI_BASE
+#define CONFIG_SYS_I2C_SLAVE		0x0
+#define CONFIG_SYS_I2C_SPEED		100000
+
+/* USB/EHCI configuration */
+#define CONFIG_EHCI_IS_TDI
+#define CONFIG_USB_MAX_CONTROLLER_COUNT 3
+
+#define CONFIG_SYS_NO_FLASH		/* Declare no flash (NOR/SPI) */
+
+/* SPI NOR flash default params, used by sf commands */
+#define CONFIG_SF_DEFAULT_SPEED		27777777 /* for fast SPL booting */
+#define CONFIG_SF_DEFAULT_MODE		SPI_MODE_3
+
+/* Environment in SPI NOR flash */
+#define CONFIG_ENV_IS_IN_SPI_FLASH
+#define CONFIG_ENV_OFFSET		(1 << 20) /* 1MiB in */
+#define CONFIG_ENV_SIZE			(64 << 10) /* 64KiB */
+#define CONFIG_ENV_SECT_SIZE		(256 << 10) /* 256KiB sectors */
+#define CONFIG_ENV_OVERWRITE
+
+#define CONFIG_PHY_MARVELL		/* there is a marvell phy */
+#define PHY_ANEG_TIMEOUT	8000	/* PHY needs a longer aneg time */
+
+#define CONFIG_SYS_CONSOLE_INFO_QUIET	/* don't print console @ startup */
+#define CONFIG_SYS_ALT_MEMTEST
+#define CONFIG_PREBOOT
+#define CONFIG_FIT
+
+#define CONFIG_SYS_HUSH_PARSER			/* Use the HUSH parser	*/
+#define	CONFIG_SYS_PROMPT_HUSH_PS2	"> "
+
+/* Keep device tree and initrd in lower memory so the kernel can access them */
+#define CONFIG_EXTRA_ENV_SETTINGS	\
+	"fdt_high=0x10000000\0"		\
+	"initrd_high=0x10000000\0"
+
+/* SATA support */
+#define CONFIG_SYS_SATA_MAX_DEVICE	1
+#define CONFIG_SATA_MV
+#define CONFIG_LIBATA
+#define CONFIG_LBA48
+#define CONFIG_EFI_PARTITION
+#define CONFIG_DOS_PARTITION
+
+/* Additional FS support/configuration */
+#define CONFIG_SUPPORT_VFAT
+
+/* PCIe support */
+#ifdef CONFIG_CMD_PCI
+#ifndef CONFIG_SPL_BUILD
+#define CONFIG_PCI
+#define CONFIG_PCI_MVEBU
+#define CONFIG_PCI_PNP
+#endif
+#endif
+
+/* Enable LCD and reserve 512KB from top of memory*/
+#define CONFIG_SYS_MEM_TOP_HIDE		0x80000
+
+#define CONFIG_VIDEO
+#define CONFIG_CFB_CONSOLE
+#define CONFIG_VGA_AS_SINGLE_DEVICE
+#define CONFIG_CMD_BMP
+
+/*
+ * mv-common.h should be defined after CMD configs since it used them
+ * to enable certain macros
+ */
+#include "mv-common.h"
+
+/*
+ * Memory layout while starting into the bin_hdr via the
+ * BootROM:
+ *
+ * 0x4000.4000 - 0x4003.4000	headers space (192KiB)
+ * 0x4000.4030			bin_hdr start address
+ * 0x4003.4000 - 0x4004.7c00	BootROM memory allocations (15KiB)
+ * 0x4007.fffc			BootROM stack top
+ *
+ * The address space between 0x4007.fffc and 0x400f.fff is not locked in
+ * L2 cache thus cannot be used.
+ */
+
+/* SPL */
+/* Defines for SPL */
+#define CONFIG_SPL_FRAMEWORK
+#define CONFIG_SPL_TEXT_BASE		0x40004030
+#define CONFIG_SPL_MAX_SIZE		((128 << 10) - 0x4030)
+
+#define CONFIG_SPL_BSS_START_ADDR	(0x40000000 + (128 << 10))
+#define CONFIG_SPL_BSS_MAX_SIZE		(16 << 10)
+
+#ifdef CONFIG_SPL_BUILD
+#define CONFIG_SYS_MALLOC_SIMPLE
+#endif
+
+#define CONFIG_SPL_STACK		(0x40000000 + ((192 - 16) << 10))
+#define CONFIG_SPL_BOOTROM_SAVE		(CONFIG_SPL_STACK + 4)
+
+#define CONFIG_SPL_LIBCOMMON_SUPPORT
+#define CONFIG_SPL_LIBGENERIC_SUPPORT
+#define CONFIG_SPL_SERIAL_SUPPORT
+#define CONFIG_SPL_I2C_SUPPORT
+
+/* SPL related SPI defines */
+#define CONFIG_SPL_SPI_SUPPORT
+#define CONFIG_SPL_SPI_FLASH_SUPPORT
+#define CONFIG_SPL_SPI_LOAD
+#define CONFIG_SPL_SPI_BUS		0
+#define CONFIG_SPL_SPI_CS		0
+#define CONFIG_SYS_SPI_U_BOOT_OFFS	0x1a000
+#define CONFIG_SYS_U_BOOT_OFFS		CONFIG_SYS_SPI_U_BOOT_OFFS
+
+/* Enable DDR support in SPL (DDR3 training from Marvell bin_hdr) */
+#define CONFIG_DDR_FIXED_SIZE		(2 << 20)	/* 2GiB */
+
+#endif /* _CONFIG_THEADORABLE_H */