diff options
author | Bin Meng <bmeng.cn@gmail.com> | 2015-03-20 17:12:20 +0800 |
---|---|---|
committer | Simon Glass <sjg@chromium.org> | 2015-03-24 21:22:37 -0600 |
commit | 8ee443b8ebb6f533e5f42d8da05600a1996a4dfd (patch) | |
tree | ec98bbd2bafef24ed0802e524000434d68a7b464 | |
parent | c58ea6cb8c01b4e43e414cdc26bc29ad52284f21 (diff) | |
download | u-boot-imx-8ee443b8ebb6f533e5f42d8da05600a1996a4dfd.zip u-boot-imx-8ee443b8ebb6f533e5f42d8da05600a1996a4dfd.tar.gz u-boot-imx-8ee443b8ebb6f533e5f42d8da05600a1996a4dfd.tar.bz2 |
net: Add Intel Topcliff GMAC driver
Add a new driver for the Gigabit Ethernet MAC found on Intel Topcliff
Platform Controller Hub. Tested under 10/100 half/full duplex and 1000
full duplex modes using ping and tftpboot commands.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
-rw-r--r-- | drivers/net/Makefile | 1 | ||||
-rw-r--r-- | drivers/net/pch_gbe.c | 466 | ||||
-rw-r--r-- | drivers/net/pch_gbe.h | 300 | ||||
-rw-r--r-- | include/netdev.h | 4 |
4 files changed, 771 insertions, 0 deletions
diff --git a/drivers/net/Makefile b/drivers/net/Makefile index b8b0803..3ff86b7 100644 --- a/drivers/net/Makefile +++ b/drivers/net/Makefile @@ -46,6 +46,7 @@ obj-$(CONFIG_DRIVER_NE2000) += ne2000.o ne2000_base.o obj-$(CONFIG_DRIVER_AX88796L) += ax88796.o ne2000_base.o obj-$(CONFIG_NETCONSOLE) += netconsole.o obj-$(CONFIG_NS8382X) += ns8382x.o +obj-$(CONFIG_PCH_GBE) += pch_gbe.o obj-$(CONFIG_PCNET) += pcnet.o obj-$(CONFIG_RTL8139) += rtl8139.o obj-$(CONFIG_RTL8169) += rtl8169.o diff --git a/drivers/net/pch_gbe.c b/drivers/net/pch_gbe.c new file mode 100644 index 0000000..976848d --- /dev/null +++ b/drivers/net/pch_gbe.c @@ -0,0 +1,466 @@ +/* + * Copyright (C) 2015, Bin Meng <bmeng.cn@gmail.com> + * + * Intel Platform Controller Hub EG20T (codename Topcliff) GMAC Driver + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <errno.h> +#include <asm/io.h> +#include <pci.h> +#include <malloc.h> +#include <miiphy.h> +#include "pch_gbe.h" + +#if !defined(CONFIG_PHYLIB) +# error "PCH Gigabit Ethernet driver requires PHYLIB - missing CONFIG_PHYLIB" +#endif + +static struct pci_device_id supported[] = { + { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_TCF_GBE }, + { } +}; + +static void pch_gbe_mac_read(struct pch_gbe_regs *mac_regs, u8 *addr) +{ + u32 macid_hi, macid_lo; + + macid_hi = readl(&mac_regs->mac_adr[0].high); + macid_lo = readl(&mac_regs->mac_adr[0].low) & 0xffff; + debug("pch_gbe: macid_hi %#x macid_lo %#x\n", macid_hi, macid_lo); + + addr[0] = (u8)(macid_hi & 0xff); + addr[1] = (u8)((macid_hi >> 8) & 0xff); + addr[2] = (u8)((macid_hi >> 16) & 0xff); + addr[3] = (u8)((macid_hi >> 24) & 0xff); + addr[4] = (u8)(macid_lo & 0xff); + addr[5] = (u8)((macid_lo >> 8) & 0xff); +} + +static int pch_gbe_mac_write(struct pch_gbe_regs *mac_regs, u8 *addr) +{ + u32 macid_hi, macid_lo; + ulong start; + + macid_hi = addr[0] + (addr[1] << 8) + (addr[2] << 16) + (addr[3] << 24); + macid_lo = addr[4] + (addr[5] << 8); + + writel(macid_hi, &mac_regs->mac_adr[0].high); + writel(macid_lo, &mac_regs->mac_adr[0].low); + writel(0xfffe, &mac_regs->addr_mask); + + start = get_timer(0); + while (get_timer(start) < PCH_GBE_TIMEOUT) { + if (!(readl(&mac_regs->addr_mask) & PCH_GBE_BUSY)) + return 0; + + udelay(10); + } + + return -ETIME; +} + +static int pch_gbe_reset(struct eth_device *dev) +{ + struct pch_gbe_priv *priv = dev->priv; + struct pch_gbe_regs *mac_regs = priv->mac_regs; + ulong start; + + priv->rx_idx = 0; + priv->tx_idx = 0; + + writel(PCH_GBE_ALL_RST, &mac_regs->reset); + + /* + * Configure the MAC to RGMII mode after reset + * + * For some unknown reason, we must do the configuration here right + * after resetting the whole MAC, otherwise the reset bit in the RESET + * register will never be cleared by the hardware. And there is another + * way of having the same magic, that is to configure the MODE register + * to have the MAC work in MII/GMII mode, which is how current Linux + * pch_gbe driver does. Since anyway we need program the MAC to RGMII + * mode in the driver, we just do it here. + * + * Note: this behavior is not documented in the hardware manual. + */ + writel(PCH_GBE_RGMII_MODE_RGMII | PCH_GBE_CHIP_TYPE_INTERNAL, + &mac_regs->rgmii_ctrl); + + start = get_timer(0); + while (get_timer(start) < PCH_GBE_TIMEOUT) { + if (!(readl(&mac_regs->reset) & PCH_GBE_ALL_RST)) { + /* + * Soft reset clears hardware MAC address registers, + * so we have to reload MAC address here in order to + * make linux pch_gbe driver happy. + */ + return pch_gbe_mac_write(mac_regs, dev->enetaddr); + } + + udelay(10); + } + + debug("pch_gbe: reset timeout\n"); + return -ETIME; +} + +static void pch_gbe_rx_descs_init(struct eth_device *dev) +{ + struct pch_gbe_priv *priv = dev->priv; + struct pch_gbe_regs *mac_regs = priv->mac_regs; + struct pch_gbe_rx_desc *rx_desc = &priv->rx_desc[0]; + int i; + + memset(rx_desc, 0, sizeof(struct pch_gbe_rx_desc) * PCH_GBE_DESC_NUM); + for (i = 0; i < PCH_GBE_DESC_NUM; i++) + rx_desc->buffer_addr = pci_phys_to_mem(priv->bdf, + (u32)(priv->rx_buff[i])); + + writel(pci_phys_to_mem(priv->bdf, (u32)rx_desc), + &mac_regs->rx_dsc_base); + writel(sizeof(struct pch_gbe_rx_desc) * (PCH_GBE_DESC_NUM - 1), + &mac_regs->rx_dsc_size); + + writel(pci_phys_to_mem(priv->bdf, (u32)(rx_desc + 1)), + &mac_regs->rx_dsc_sw_p); +} + +static void pch_gbe_tx_descs_init(struct eth_device *dev) +{ + struct pch_gbe_priv *priv = dev->priv; + struct pch_gbe_regs *mac_regs = priv->mac_regs; + struct pch_gbe_tx_desc *tx_desc = &priv->tx_desc[0]; + + memset(tx_desc, 0, sizeof(struct pch_gbe_tx_desc) * PCH_GBE_DESC_NUM); + + writel(pci_phys_to_mem(priv->bdf, (u32)tx_desc), + &mac_regs->tx_dsc_base); + writel(sizeof(struct pch_gbe_tx_desc) * (PCH_GBE_DESC_NUM - 1), + &mac_regs->tx_dsc_size); + writel(pci_phys_to_mem(priv->bdf, (u32)(tx_desc + 1)), + &mac_regs->tx_dsc_sw_p); +} + +static void pch_gbe_adjust_link(struct pch_gbe_regs *mac_regs, + struct phy_device *phydev) +{ + if (!phydev->link) { + printf("%s: No link.\n", phydev->dev->name); + return; + } + + clrbits_le32(&mac_regs->rgmii_ctrl, + PCH_GBE_RGMII_RATE_2_5M | PCH_GBE_CRS_SEL); + clrbits_le32(&mac_regs->mode, + PCH_GBE_MODE_GMII_ETHER | PCH_GBE_MODE_FULL_DUPLEX); + + switch (phydev->speed) { + case 1000: + setbits_le32(&mac_regs->rgmii_ctrl, PCH_GBE_RGMII_RATE_125M); + setbits_le32(&mac_regs->mode, PCH_GBE_MODE_GMII_ETHER); + break; + case 100: + setbits_le32(&mac_regs->rgmii_ctrl, PCH_GBE_RGMII_RATE_25M); + setbits_le32(&mac_regs->mode, PCH_GBE_MODE_MII_ETHER); + break; + case 10: + setbits_le32(&mac_regs->rgmii_ctrl, PCH_GBE_RGMII_RATE_2_5M); + setbits_le32(&mac_regs->mode, PCH_GBE_MODE_MII_ETHER); + break; + } + + if (phydev->duplex) { + setbits_le32(&mac_regs->rgmii_ctrl, PCH_GBE_CRS_SEL); + setbits_le32(&mac_regs->mode, PCH_GBE_MODE_FULL_DUPLEX); + } + + printf("Speed: %d, %s duplex\n", phydev->speed, + (phydev->duplex) ? "full" : "half"); + + return; +} + +static int pch_gbe_init(struct eth_device *dev, bd_t *bis) +{ + struct pch_gbe_priv *priv = dev->priv; + struct pch_gbe_regs *mac_regs = priv->mac_regs; + + if (pch_gbe_reset(dev)) + return -1; + + pch_gbe_rx_descs_init(dev); + pch_gbe_tx_descs_init(dev); + + /* Enable frame bursting */ + writel(PCH_GBE_MODE_FR_BST, &mac_regs->mode); + /* Disable TCP/IP accelerator */ + writel(PCH_GBE_RX_TCPIPACC_OFF, &mac_regs->tcpip_acc); + /* Disable RX flow control */ + writel(0, &mac_regs->rx_fctrl); + /* Configure RX/TX mode */ + writel(PCH_GBE_RH_ALM_EMP_16 | PCH_GBE_RH_ALM_FULL_16 | + PCH_GBE_RH_RD_TRG_32, &mac_regs->rx_mode); + writel(PCH_GBE_TM_TH_TX_STRT_32 | PCH_GBE_TM_TH_ALM_EMP_16 | + PCH_GBE_TM_TH_ALM_FULL_32 | PCH_GBE_TM_ST_AND_FD | + PCH_GBE_TM_SHORT_PKT, &mac_regs->tx_mode); + + /* Start up the PHY */ + if (phy_startup(priv->phydev)) { + printf("Could not initialize PHY %s\n", + priv->phydev->dev->name); + return -1; + } + + pch_gbe_adjust_link(mac_regs, priv->phydev); + + if (!priv->phydev->link) + return -1; + + /* Enable TX & RX */ + writel(PCH_GBE_RX_DMA_EN | PCH_GBE_TX_DMA_EN, &mac_regs->dma_ctrl); + writel(PCH_GBE_MRE_MAC_RX_EN, &mac_regs->mac_rx_en); + + return 0; +} + +static void pch_gbe_halt(struct eth_device *dev) +{ + struct pch_gbe_priv *priv = dev->priv; + + pch_gbe_reset(dev); + + phy_shutdown(priv->phydev); +} + +static int pch_gbe_send(struct eth_device *dev, void *packet, int length) +{ + struct pch_gbe_priv *priv = dev->priv; + struct pch_gbe_regs *mac_regs = priv->mac_regs; + struct pch_gbe_tx_desc *tx_head, *tx_desc; + u16 frame_ctrl = 0; + u32 int_st; + ulong start; + + tx_head = &priv->tx_desc[0]; + tx_desc = &priv->tx_desc[priv->tx_idx]; + + if (length < 64) + frame_ctrl |= PCH_GBE_TXD_CTRL_APAD; + + tx_desc->buffer_addr = pci_phys_to_mem(priv->bdf, (u32)packet); + tx_desc->length = length; + tx_desc->tx_words_eob = length + 3; + tx_desc->tx_frame_ctrl = frame_ctrl; + tx_desc->dma_status = 0; + tx_desc->gbec_status = 0; + + /* Test the wrap-around condition */ + if (++priv->tx_idx >= PCH_GBE_DESC_NUM) + priv->tx_idx = 0; + + writel(pci_phys_to_mem(priv->bdf, (u32)(tx_head + priv->tx_idx)), + &mac_regs->tx_dsc_sw_p); + + start = get_timer(0); + while (get_timer(start) < PCH_GBE_TIMEOUT) { + int_st = readl(&mac_regs->int_st); + if (int_st & PCH_GBE_INT_TX_CMPLT) + return 0; + + udelay(10); + } + + debug("pch_gbe: sent failed\n"); + return -ETIME; +} + +static int pch_gbe_recv(struct eth_device *dev) +{ + struct pch_gbe_priv *priv = dev->priv; + struct pch_gbe_regs *mac_regs = priv->mac_regs; + struct pch_gbe_rx_desc *rx_head, *rx_desc; + u32 hw_desc, buffer_addr, length; + int rx_swp; + + rx_head = &priv->rx_desc[0]; + rx_desc = &priv->rx_desc[priv->rx_idx]; + + readl(&mac_regs->int_st); + hw_desc = readl(&mac_regs->rx_dsc_hw_p_hld); + + /* Just return if not receiving any packet */ + if ((u32)rx_desc == hw_desc) + return 0; + + buffer_addr = pci_mem_to_phys(priv->bdf, rx_desc->buffer_addr); + length = rx_desc->rx_words_eob - 3 - ETH_FCS_LEN; + NetReceive((uchar *)buffer_addr, length); + + /* Test the wrap-around condition */ + if (++priv->rx_idx >= PCH_GBE_DESC_NUM) + priv->rx_idx = 0; + rx_swp = priv->rx_idx; + if (++rx_swp >= PCH_GBE_DESC_NUM) + rx_swp = 0; + + writel(pci_phys_to_mem(priv->bdf, (u32)(rx_head + rx_swp)), + &mac_regs->rx_dsc_sw_p); + + return length; +} + +static int pch_gbe_mdio_ready(struct pch_gbe_regs *mac_regs) +{ + ulong start = get_timer(0); + + while (get_timer(start) < PCH_GBE_TIMEOUT) { + if (readl(&mac_regs->miim) & PCH_GBE_MIIM_OPER_READY) + return 0; + + udelay(10); + } + + return -ETIME; +} + +static int pch_gbe_mdio_read(struct mii_dev *bus, int addr, int devad, int reg) +{ + struct pch_gbe_regs *mac_regs = bus->priv; + u32 miim; + + if (pch_gbe_mdio_ready(mac_regs)) + return -ETIME; + + miim = (addr << PCH_GBE_MIIM_PHY_ADDR_SHIFT) | + (reg << PCH_GBE_MIIM_REG_ADDR_SHIFT) | + PCH_GBE_MIIM_OPER_READ; + writel(miim, &mac_regs->miim); + + if (pch_gbe_mdio_ready(mac_regs)) + return -ETIME; + + return readl(&mac_regs->miim) & 0xffff; +} + +static int pch_gbe_mdio_write(struct mii_dev *bus, int addr, int devad, + int reg, u16 val) +{ + struct pch_gbe_regs *mac_regs = bus->priv; + u32 miim; + + if (pch_gbe_mdio_ready(mac_regs)) + return -ETIME; + + miim = (addr << PCH_GBE_MIIM_PHY_ADDR_SHIFT) | + (reg << PCH_GBE_MIIM_REG_ADDR_SHIFT) | + PCH_GBE_MIIM_OPER_WRITE | val; + writel(miim, &mac_regs->miim); + + if (pch_gbe_mdio_ready(mac_regs)) + return -ETIME; + else + return 0; +} + +static int pch_gbe_mdio_init(char *name, struct pch_gbe_regs *mac_regs) +{ + struct mii_dev *bus; + + bus = mdio_alloc(); + if (!bus) { + debug("pch_gbe: failed to allocate MDIO bus\n"); + return -ENOMEM; + } + + bus->read = pch_gbe_mdio_read; + bus->write = pch_gbe_mdio_write; + sprintf(bus->name, name); + + bus->priv = (void *)mac_regs; + + return mdio_register(bus); +} + +static int pch_gbe_phy_init(struct eth_device *dev) +{ + struct pch_gbe_priv *priv = dev->priv; + struct phy_device *phydev; + int mask = 0xffffffff; + + phydev = phy_find_by_mask(priv->bus, mask, priv->interface); + if (!phydev) { + printf("pch_gbe: cannot find the phy\n"); + return -1; + } + + phy_connect_dev(phydev, dev); + + phydev->supported &= PHY_GBIT_FEATURES; + phydev->advertising = phydev->supported; + + priv->phydev = phydev; + phy_config(phydev); + + return 1; +} + +int pch_gbe_register(bd_t *bis) +{ + struct eth_device *dev; + struct pch_gbe_priv *priv; + pci_dev_t devno; + u32 iobase; + + devno = pci_find_devices(supported, 0); + if (devno == -1) + return -ENODEV; + + dev = (struct eth_device *)malloc(sizeof(*dev)); + if (!dev) + return -ENOMEM; + memset(dev, 0, sizeof(*dev)); + + /* + * The priv structure contains the descriptors and frame buffers which + * need a strict buswidth alignment (64 bytes) + */ + priv = (struct pch_gbe_priv *)memalign(PCH_GBE_ALIGN_SIZE, + sizeof(*priv)); + if (!priv) { + free(dev); + return -ENOMEM; + } + memset(priv, 0, sizeof(*priv)); + + dev->priv = priv; + priv->dev = dev; + priv->bdf = devno; + + pci_read_config_dword(devno, PCI_BASE_ADDRESS_1, &iobase); + iobase &= PCI_BASE_ADDRESS_MEM_MASK; + iobase = pci_mem_to_phys(devno, iobase); + + dev->iobase = iobase; + priv->mac_regs = (struct pch_gbe_regs *)iobase; + + sprintf(dev->name, "pch_gbe.%x", iobase); + + /* Read MAC address from SROM and initialize dev->enetaddr with it */ + pch_gbe_mac_read(priv->mac_regs, dev->enetaddr); + + dev->init = pch_gbe_init; + dev->halt = pch_gbe_halt; + dev->send = pch_gbe_send; + dev->recv = pch_gbe_recv; + + eth_register(dev); + + priv->interface = PHY_INTERFACE_MODE_RGMII; + pch_gbe_mdio_init(dev->name, priv->mac_regs); + priv->bus = miiphy_get_dev_by_name(dev->name); + + return pch_gbe_phy_init(dev); +} diff --git a/drivers/net/pch_gbe.h b/drivers/net/pch_gbe.h new file mode 100644 index 0000000..11329d4 --- /dev/null +++ b/drivers/net/pch_gbe.h @@ -0,0 +1,300 @@ +/* + * Copyright (C) 2015, Bin Meng <bmeng.cn@gmail.com> + * + * Intel Platform Controller Hub EG20T (codename Topcliff) GMAC Driver + * Adapted from linux drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe.h + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _PCH_GBE_H_ +#define _PCH_GBE_H_ + +#define PCH_GBE_TIMEOUT (3 * CONFIG_SYS_HZ) + +#define PCH_GBE_DESC_NUM 4 +#define PCH_GBE_ALIGN_SIZE 64 + +/* + * Topcliff GBE MAC supports receiving ethernet frames with normal frame size + * (64-1518 bytes) as well as up to 10318 bytes, however it does not have a + * register bit to turn off receiving 'jumbo frame', so we have to allocate + * our own buffer to store the received frames instead of using U-Boot's own. + */ +#define PCH_GBE_RX_FRAME_LEN ROUND(10318, PCH_GBE_ALIGN_SIZE) + +/* Interrupt Status */ +/* Interrupt Status Hold */ +/* Interrupt Enable */ +#define PCH_GBE_INT_RX_DMA_CMPLT 0x00000001 +#define PCH_GBE_INT_RX_VALID 0x00000002 +#define PCH_GBE_INT_RX_FRAME_ERR 0x00000004 +#define PCH_GBE_INT_RX_FIFO_ERR 0x00000008 +#define PCH_GBE_INT_RX_DMA_ERR 0x00000010 +#define PCH_GBE_INT_RX_DSC_EMP 0x00000020 +#define PCH_GBE_INT_TX_CMPLT 0x00000100 +#define PCH_GBE_INT_TX_DMA_CMPLT 0x00000200 +#define PCH_GBE_INT_TX_FIFO_ERR 0x00000400 +#define PCH_GBE_INT_TX_DMA_ERR 0x00000800 +#define PCH_GBE_INT_PAUSE_CMPLT 0x00001000 +#define PCH_GBE_INT_MIIM_CMPLT 0x00010000 +#define PCH_GBE_INT_PHY_INT 0x00100000 +#define PCH_GBE_INT_WOL_DET 0x01000000 +#define PCH_GBE_INT_TCPIP_ERR 0x10000000 + +/* Mode */ +#define PCH_GBE_MODE_MII_ETHER 0x00000000 +#define PCH_GBE_MODE_GMII_ETHER 0x80000000 +#define PCH_GBE_MODE_HALF_DUPLEX 0x00000000 +#define PCH_GBE_MODE_FULL_DUPLEX 0x40000000 +#define PCH_GBE_MODE_FR_BST 0x04000000 + +/* Reset */ +#define PCH_GBE_ALL_RST 0x80000000 +#define PCH_GBE_TX_RST 0x00008000 +#define PCH_GBE_RX_RST 0x00004000 + +/* TCP/IP Accelerator Control */ +#define PCH_GBE_EX_LIST_EN 0x00000008 +#define PCH_GBE_RX_TCPIPACC_OFF 0x00000004 +#define PCH_GBE_TX_TCPIPACC_EN 0x00000002 +#define PCH_GBE_RX_TCPIPACC_EN 0x00000001 + +/* MAC RX Enable */ +#define PCH_GBE_MRE_MAC_RX_EN 0x00000001 + +/* RX Flow Control */ +#define PCH_GBE_FL_CTRL_EN 0x80000000 + +/* RX Mode */ +#define PCH_GBE_ADD_FIL_EN 0x80000000 +#define PCH_GBE_MLT_FIL_EN 0x40000000 +#define PCH_GBE_RH_ALM_EMP_4 0x00000000 +#define PCH_GBE_RH_ALM_EMP_8 0x00004000 +#define PCH_GBE_RH_ALM_EMP_16 0x00008000 +#define PCH_GBE_RH_ALM_EMP_32 0x0000c000 +#define PCH_GBE_RH_ALM_FULL_4 0x00000000 +#define PCH_GBE_RH_ALM_FULL_8 0x00001000 +#define PCH_GBE_RH_ALM_FULL_16 0x00002000 +#define PCH_GBE_RH_ALM_FULL_32 0x00003000 +#define PCH_GBE_RH_RD_TRG_4 0x00000000 +#define PCH_GBE_RH_RD_TRG_8 0x00000200 +#define PCH_GBE_RH_RD_TRG_16 0x00000400 +#define PCH_GBE_RH_RD_TRG_32 0x00000600 +#define PCH_GBE_RH_RD_TRG_64 0x00000800 +#define PCH_GBE_RH_RD_TRG_128 0x00000a00 +#define PCH_GBE_RH_RD_TRG_256 0x00000c00 +#define PCH_GBE_RH_RD_TRG_512 0x00000e00 + +/* TX Mode */ +#define PCH_GBE_TM_NO_RTRY 0x80000000 +#define PCH_GBE_TM_LONG_PKT 0x40000000 +#define PCH_GBE_TM_ST_AND_FD 0x20000000 +#define PCH_GBE_TM_SHORT_PKT 0x10000000 +#define PCH_GBE_TM_LTCOL_RETX 0x08000000 +#define PCH_GBE_TM_TH_TX_STRT_4 0x00000000 +#define PCH_GBE_TM_TH_TX_STRT_8 0x00004000 +#define PCH_GBE_TM_TH_TX_STRT_16 0x00008000 +#define PCH_GBE_TM_TH_TX_STRT_32 0x0000c000 +#define PCH_GBE_TM_TH_ALM_EMP_4 0x00000000 +#define PCH_GBE_TM_TH_ALM_EMP_8 0x00000800 +#define PCH_GBE_TM_TH_ALM_EMP_16 0x00001000 +#define PCH_GBE_TM_TH_ALM_EMP_32 0x00001800 +#define PCH_GBE_TM_TH_ALM_EMP_64 0x00002000 +#define PCH_GBE_TM_TH_ALM_EMP_128 0x00002800 +#define PCH_GBE_TM_TH_ALM_EMP_256 0x00003000 +#define PCH_GBE_TM_TH_ALM_EMP_512 0x00003800 +#define PCH_GBE_TM_TH_ALM_FULL_4 0x00000000 +#define PCH_GBE_TM_TH_ALM_FULL_8 0x00000200 +#define PCH_GBE_TM_TH_ALM_FULL_16 0x00000400 +#define PCH_GBE_TM_TH_ALM_FULL_32 0x00000600 + +/* MAC Address Mask */ +#define PCH_GBE_BUSY 0x80000000 + +/* MIIM */ +#define PCH_GBE_MIIM_OPER_WRITE 0x04000000 +#define PCH_GBE_MIIM_OPER_READ 0x00000000 +#define PCH_GBE_MIIM_OPER_READY 0x04000000 +#define PCH_GBE_MIIM_PHY_ADDR_SHIFT 21 +#define PCH_GBE_MIIM_REG_ADDR_SHIFT 16 + +/* RGMII Control */ +#define PCH_GBE_CRS_SEL 0x00000010 +#define PCH_GBE_RGMII_RATE_125M 0x00000000 +#define PCH_GBE_RGMII_RATE_25M 0x00000008 +#define PCH_GBE_RGMII_RATE_2_5M 0x0000000c +#define PCH_GBE_RGMII_MODE_GMII 0x00000000 +#define PCH_GBE_RGMII_MODE_RGMII 0x00000002 +#define PCH_GBE_CHIP_TYPE_EXTERNAL 0x00000000 +#define PCH_GBE_CHIP_TYPE_INTERNAL 0x00000001 + +/* DMA Control */ +#define PCH_GBE_RX_DMA_EN 0x00000002 +#define PCH_GBE_TX_DMA_EN 0x00000001 + +/* Receive Descriptor bit definitions */ +#define PCH_GBE_RXD_ACC_STAT_BCAST 0x00000400 +#define PCH_GBE_RXD_ACC_STAT_MCAST 0x00000200 +#define PCH_GBE_RXD_ACC_STAT_UCAST 0x00000100 +#define PCH_GBE_RXD_ACC_STAT_TCPIPOK 0x000000c0 +#define PCH_GBE_RXD_ACC_STAT_IPOK 0x00000080 +#define PCH_GBE_RXD_ACC_STAT_TCPOK 0x00000040 +#define PCH_GBE_RXD_ACC_STAT_IP6ERR 0x00000020 +#define PCH_GBE_RXD_ACC_STAT_OFLIST 0x00000010 +#define PCH_GBE_RXD_ACC_STAT_TYPEIP 0x00000008 +#define PCH_GBE_RXD_ACC_STAT_MACL 0x00000004 +#define PCH_GBE_RXD_ACC_STAT_PPPOE 0x00000002 +#define PCH_GBE_RXD_ACC_STAT_VTAGT 0x00000001 +#define PCH_GBE_RXD_GMAC_STAT_PAUSE 0x0200 +#define PCH_GBE_RXD_GMAC_STAT_MARBR 0x0100 +#define PCH_GBE_RXD_GMAC_STAT_MARMLT 0x0080 +#define PCH_GBE_RXD_GMAC_STAT_MARIND 0x0040 +#define PCH_GBE_RXD_GMAC_STAT_MARNOTMT 0x0020 +#define PCH_GBE_RXD_GMAC_STAT_TLONG 0x0010 +#define PCH_GBE_RXD_GMAC_STAT_TSHRT 0x0008 +#define PCH_GBE_RXD_GMAC_STAT_NOTOCTAL 0x0004 +#define PCH_GBE_RXD_GMAC_STAT_NBLERR 0x0002 +#define PCH_GBE_RXD_GMAC_STAT_CRCERR 0x0001 + +/* Transmit Descriptor bit definitions */ +#define PCH_GBE_TXD_CTRL_TCPIP_ACC_OFF 0x0008 +#define PCH_GBE_TXD_CTRL_ITAG 0x0004 +#define PCH_GBE_TXD_CTRL_ICRC 0x0002 +#define PCH_GBE_TXD_CTRL_APAD 0x0001 +#define PCH_GBE_TXD_WORDS_SHIFT 2 +#define PCH_GBE_TXD_GMAC_STAT_CMPLT 0x2000 +#define PCH_GBE_TXD_GMAC_STAT_ABT 0x1000 +#define PCH_GBE_TXD_GMAC_STAT_EXCOL 0x0800 +#define PCH_GBE_TXD_GMAC_STAT_SNGCOL 0x0400 +#define PCH_GBE_TXD_GMAC_STAT_MLTCOL 0x0200 +#define PCH_GBE_TXD_GMAC_STAT_CRSER 0x0100 +#define PCH_GBE_TXD_GMAC_STAT_TLNG 0x0080 +#define PCH_GBE_TXD_GMAC_STAT_TSHRT 0x0040 +#define PCH_GBE_TXD_GMAC_STAT_LTCOL 0x0020 +#define PCH_GBE_TXD_GMAC_STAT_TFUNDFLW 0x0010 + +/** + * struct pch_gbe_rx_desc - Receive Descriptor + * @buffer_addr: RX Frame Buffer Address + * @tcp_ip_status: TCP/IP Accelerator Status + * @rx_words_eob: RX word count and Byte position + * @gbec_status: GMAC Status + * @dma_status: DMA Status + * @reserved1: Reserved + * @reserved2: Reserved + */ +struct pch_gbe_rx_desc { + u32 buffer_addr; + u32 tcp_ip_status; + u16 rx_words_eob; + u16 gbec_status; + u8 dma_status; + u8 reserved1; + u16 reserved2; +}; + +/** + * struct pch_gbe_tx_desc - Transmit Descriptor + * @buffer_addr: TX Frame Buffer Address + * @length: Data buffer length + * @reserved1: Reserved + * @tx_words_eob: TX word count and Byte position + * @tx_frame_ctrl: TX Frame Control + * @dma_status: DMA Status + * @reserved2: Reserved + * @gbec_status: GMAC Status + */ +struct pch_gbe_tx_desc { + u32 buffer_addr; + u16 length; + u16 reserved1; + u16 tx_words_eob; + u16 tx_frame_ctrl; + u8 dma_status; + u8 reserved2; + u16 gbec_status; +}; + +/** + * pch_gbe_regs_mac_adr - structure holding values of mac address registers + * + * @high Denotes the 1st to 4th byte from the initial of MAC address + * @low Denotes the 5th to 6th byte from the initial of MAC address + */ +struct pch_gbe_regs_mac_adr { + u32 high; + u32 low; +}; + +/** + * pch_gbe_regs - structure holding values of MAC registers + */ +struct pch_gbe_regs { + u32 int_st; + u32 int_en; + u32 mode; + u32 reset; + u32 tcpip_acc; + u32 ex_list; + u32 int_st_hold; + u32 phy_int_ctrl; + u32 mac_rx_en; + u32 rx_fctrl; + u32 pause_req; + u32 rx_mode; + u32 tx_mode; + u32 rx_fifo_st; + u32 tx_fifo_st; + u32 tx_fid; + u32 tx_result; + u32 pause_pkt1; + u32 pause_pkt2; + u32 pause_pkt3; + u32 pause_pkt4; + u32 pause_pkt5; + u32 reserve[2]; + struct pch_gbe_regs_mac_adr mac_adr[16]; + u32 addr_mask; + u32 miim; + u32 mac_addr_load; + u32 rgmii_st; + u32 rgmii_ctrl; + u32 reserve3[3]; + u32 dma_ctrl; + u32 reserve4[3]; + u32 rx_dsc_base; + u32 rx_dsc_size; + u32 rx_dsc_hw_p; + u32 rx_dsc_hw_p_hld; + u32 rx_dsc_sw_p; + u32 reserve5[3]; + u32 tx_dsc_base; + u32 tx_dsc_size; + u32 tx_dsc_hw_p; + u32 tx_dsc_hw_p_hld; + u32 tx_dsc_sw_p; + u32 reserve6[3]; + u32 rx_dma_st; + u32 tx_dma_st; + u32 reserve7[2]; + u32 wol_st; + u32 wol_ctrl; + u32 wol_addr_mask; +}; + +struct pch_gbe_priv { + struct pch_gbe_rx_desc rx_desc[PCH_GBE_DESC_NUM]; + struct pch_gbe_tx_desc tx_desc[PCH_GBE_DESC_NUM]; + char rx_buff[PCH_GBE_DESC_NUM][PCH_GBE_RX_FRAME_LEN]; + struct eth_device *dev; + struct phy_device *phydev; + struct mii_dev *bus; + struct pch_gbe_regs *mac_regs; + pci_dev_t bdf; + u32 interface; + int rx_idx; + int tx_idx; +}; + +#endif /* _PCH_GBE_H_ */ diff --git a/include/netdev.h b/include/netdev.h index 90140bd..c69533e 100644 --- a/include/netdev.h +++ b/include/netdev.h @@ -69,6 +69,7 @@ int natsemi_initialize(bd_t *bis); int ne2k_register(void); int npe_initialize(bd_t *bis); int ns8382x_initialize(bd_t *bis); +int pch_gbe_register(bd_t *bis); int pcnet_initialize(bd_t *bis); int ppc_4xx_eth_initialize (bd_t *bis); int rtl8139_initialize(bd_t *bis); @@ -123,6 +124,9 @@ static inline int pci_eth_init(bd_t *bis) #ifdef CONFIG_E1000 num += e1000_initialize(bis); #endif +#ifdef CONFIG_PCH_GBE + num += pch_gbe_register(bis); +#endif #ifdef CONFIG_PCNET num += pcnet_initialize(bis); #endif |