tegra: usb: Add support for Tegra USB peripheral

This adds basic support for the Tegra2 USB controller. Board files should
call board_usb_init() to set things up.

Configuration is performed through the FDT, with aliases used to set the
order of the ports, like this fragment:

        aliases {
		/* This defines the order of our USB ports */
                usb0 = "/usb@0xc5008000";
                usb1 = "/usb@0xc5000000";
        };

drivers/usb/host files ONLY: Acked-by: Remy Bohmer <linux@bohmer.net>
Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Warren <twarren@nvidia.com>

8 files changed, 782 insertions, 1 deletions

diff --git a/arch/arm/cpu/armv7/tegra2/Makefile b/arch/arm/cpu/armv7/tegra2/Makefile
index f668a81..e9ac6c9 100644
--- a/arch/arm/cpu/armv7/tegra2/Makefile
+++ b/arch/arm/cpu/armv7/tegra2/Makefile
@@ -33,8 +33,10 @@ include $(TOPDIR)/config.mk
 LIB	=  $(obj)lib$(SOC).o
 
 SOBJS	:= lowlevel_init.o
-COBJS	:= ap20.o board.o clock.o funcmux.o pinmux.o sys_info.o timer.o
+COBJS-y	:= ap20.o board.o clock.o funcmux.o pinmux.o sys_info.o timer.o
+COBJS-$(CONFIG_USB_EHCI_TEGRA) += usb.o
 
+COBJS	:= $(COBJS-y)
 SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
 OBJS	:= $(addprefix $(obj),$(COBJS) $(SOBJS))
 
diff --git a/arch/arm/cpu/armv7/tegra2/usb.c b/arch/arm/cpu/armv7/tegra2/usb.c
new file mode 100644
index 0000000..c80de7f
--- /dev/null
+++ b/arch/arm/cpu/armv7/tegra2/usb.c
@@ -0,0 +1,460 @@
+/*
+ * Copyright (c) 2011 The Chromium OS Authors.
+ * (C) Copyright 2010,2011 NVIDIA Corporation <www.nvidia.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm-generic/gpio.h>
+#include <asm/arch/tegra2.h>
+#include <asm/arch/clk_rst.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/pinmux.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/arch/uart.h>
+#include <asm/arch/usb.h>
+#include <libfdt.h>
+#include <fdtdec.h>
+
+enum {
+	USB_PORTS_MAX	= 4,			/* Maximum ports we allow */
+};
+
+/* Parameters we need for USB */
+enum {
+	PARAM_DIVN,                     /* PLL FEEDBACK DIVIDer */
+	PARAM_DIVM,                     /* PLL INPUT DIVIDER */
+	PARAM_DIVP,                     /* POST DIVIDER (2^N) */
+	PARAM_CPCON,                    /* BASE PLLC CHARGE Pump setup ctrl */
+	PARAM_LFCON,                    /* BASE PLLC LOOP FILter setup ctrl */
+	PARAM_ENABLE_DELAY_COUNT,       /* PLL-U Enable Delay Count */
+	PARAM_STABLE_COUNT,             /* PLL-U STABLE count */
+	PARAM_ACTIVE_DELAY_COUNT,       /* PLL-U Active delay count */
+	PARAM_XTAL_FREQ_COUNT,          /* PLL-U XTAL frequency count */
+	PARAM_DEBOUNCE_A_TIME,          /* 10MS DELAY for BIAS_DEBOUNCE_A */
+	PARAM_BIAS_TIME,                /* 20US DELAY AFter bias cell op */
+
+	PARAM_COUNT
+};
+
+/* Possible port types (dual role mode) */
+enum dr_mode {
+	DR_MODE_NONE = 0,
+	DR_MODE_HOST,		/* supports host operation */
+	DR_MODE_DEVICE,		/* supports device operation */
+	DR_MODE_OTG,		/* supports both */
+};
+
+/* Information about a USB port */
+struct fdt_usb {
+	struct usb_ctlr *reg;	/* address of registers in physical memory */
+	unsigned utmi:1;	/* 1 if port has external tranceiver, else 0 */
+	unsigned enabled:1;	/* 1 to enable, 0 to disable */
+	unsigned has_legacy_mode:1; /* 1 if this port has legacy mode */
+	enum dr_mode dr_mode;	/* dual role mode */
+	enum periph_id periph_id;/* peripheral id */
+	struct fdt_gpio_state vbus_gpio;	/* GPIO for vbus enable */
+};
+
+static struct fdt_usb port[USB_PORTS_MAX];	/* List of valid USB ports */
+static unsigned port_count;			/* Number of available ports */
+static int port_current;			/* Current port (-1 = none) */
+
+/*
+ * This table has USB timing parameters for each Oscillator frequency we
+ * support. There are four sets of values:
+ *
+ * 1. PLLU configuration information (reference clock is osc/clk_m and
+ * PLLU-FOs are fixed at 12MHz/60MHz/480MHz).
+ *
+ *  Reference frequency     13.0MHz      19.2MHz      12.0MHz      26.0MHz
+ *  ----------------------------------------------------------------------
+ *      DIVN                960 (0x3c0)  200 (0c8)    960 (3c0h)   960 (3c0)
+ *      DIVM                13 (0d)      4 (04)       12 (0c)      26 (1a)
+ * Filter frequency (MHz)   1            4.8          6            2
+ * CPCON                    1100b        0011b        1100b        1100b
+ * LFCON0                   0            0            0            0
+ *
+ * 2. PLL CONFIGURATION & PARAMETERS for different clock generators:
+ *
+ * Reference frequency     13.0MHz         19.2MHz         12.0MHz     26.0MHz
+ * ---------------------------------------------------------------------------
+ * PLLU_ENABLE_DLY_COUNT   02 (0x02)       03 (03)         02 (02)     04 (04)
+ * PLLU_STABLE_COUNT       51 (33)         75 (4B)         47 (2F)    102 (66)
+ * PLL_ACTIVE_DLY_COUNT    05 (05)         06 (06)         04 (04)     09 (09)
+ * XTAL_FREQ_COUNT        127 (7F)        187 (BB)        118 (76)    254 (FE)
+ *
+ * 3. Debounce values IdDig, Avalid, Bvalid, VbusValid, VbusWakeUp, and
+ * SessEnd. Each of these signals have their own debouncer and for each of
+ * those one out of two debouncing times can be chosen (BIAS_DEBOUNCE_A or
+ * BIAS_DEBOUNCE_B).
+ *
+ * The values of DEBOUNCE_A and DEBOUNCE_B are calculated as follows:
+ *    0xffff -> No debouncing at all
+ *    <n> ms = <n> *1000 / (1/19.2MHz) / 4
+ *
+ * So to program a 1 ms debounce for BIAS_DEBOUNCE_A, we have:
+ * BIAS_DEBOUNCE_A[15:0] = 1000 * 19.2 / 4  = 4800 = 0x12c0
+ *
+ * We need to use only DebounceA for BOOTROM. We don't need the DebounceB
+ * values, so we can keep those to default.
+ *
+ * 4. The 20 microsecond delay after bias cell operation.
+ */
+static const unsigned usb_pll[CLOCK_OSC_FREQ_COUNT][PARAM_COUNT] = {
+	/* DivN, DivM, DivP, CPCON, LFCON, Delays             Debounce, Bias */
+	{ 0x3C0, 0x0D, 0x00, 0xC,   0,  0x02, 0x33, 0x05, 0x7F, 0x7EF4, 5 },
+	{ 0x0C8, 0x04, 0x00, 0x3,   0,  0x03, 0x4B, 0x06, 0xBB, 0xBB80, 7 },
+	{ 0x3C0, 0x0C, 0x00, 0xC,   0,  0x02, 0x2F, 0x04, 0x76, 0x7530, 5 },
+	{ 0x3C0, 0x1A, 0x00, 0xC,   0,  0x04, 0x66, 0x09, 0xFE, 0xFDE8, 9 }
+};
+
+/* UTMIP Idle Wait Delay */
+static const u8 utmip_idle_wait_delay = 17;
+
+/* UTMIP Elastic limit */
+static const u8 utmip_elastic_limit = 16;
+
+/* UTMIP High Speed Sync Start Delay */
+static const u8 utmip_hs_sync_start_delay = 9;
+
+/* Put the port into host mode (this only works for OTG ports) */
+static void set_host_mode(struct fdt_usb *config)
+{
+	if (config->dr_mode == DR_MODE_OTG) {
+		/* Check whether remote host from USB1 is driving VBus */
+		if (readl(&config->reg->phy_vbus_sensors) & VBUS_VLD_STS)
+			return;
+
+		/*
+		 * If not driving, we set the GPIO to enable VBUS. We assume
+		 * that the pinmux is set up correctly for this.
+		 */
+		if (fdt_gpio_isvalid(&config->vbus_gpio)) {
+			fdtdec_setup_gpio(&config->vbus_gpio);
+			gpio_direction_output(config->vbus_gpio.gpio, 1);
+			debug("set_host_mode: GPIO %d high\n",
+			      config->vbus_gpio.gpio);
+		}
+	}
+}
+
+void usbf_reset_controller(struct fdt_usb *config, struct usb_ctlr *usbctlr)
+{
+	/* Reset the USB controller with 2us delay */
+	reset_periph(config->periph_id, 2);
+
+	/*
+	 * Set USB1_NO_LEGACY_MODE to 1, Registers are accessible under
+	 * base address
+	 */
+	if (config->has_legacy_mode)
+		setbits_le32(&usbctlr->usb1_legacy_ctrl, USB1_NO_LEGACY_MODE);
+
+	/* Put UTMIP1/3 in reset */
+	setbits_le32(&usbctlr->susp_ctrl, UTMIP_RESET);
+
+	/* Enable the UTMIP PHY */
+	if (config->utmi)
+		setbits_le32(&usbctlr->susp_ctrl, UTMIP_PHY_ENB);
+
+	/*
+	 * TODO: where do we take the USB1 out of reset? The old code would
+	 * take USB3 out of reset, but not USB1. This code doesn't do either.
+	 */
+}
+
+/* set up the USB controller with the parameters provided */
+static int init_usb_controller(struct fdt_usb *config,
+				struct usb_ctlr *usbctlr, const u32 timing[])
+{
+	u32 val;
+	int loop_count;
+
+	clock_enable(config->periph_id);
+
+	/* Reset the usb controller */
+	usbf_reset_controller(config, usbctlr);
+
+	/* Stop crystal clock by setting UTMIP_PHY_XTAL_CLOCKEN low */
+	clrbits_le32(&usbctlr->utmip_misc_cfg1, UTMIP_PHY_XTAL_CLOCKEN);
+
+	/* Follow the crystal clock disable by >100ns delay */
+	udelay(1);
+
+	/*
+	 * To Use the A Session Valid for cable detection logic, VBUS_WAKEUP
+	 * mux must be switched to actually use a_sess_vld threshold.
+	 */
+	if (fdt_gpio_isvalid(&config->vbus_gpio)) {
+		clrsetbits_le32(&usbctlr->usb1_legacy_ctrl,
+			VBUS_SENSE_CTL_MASK,
+			VBUS_SENSE_CTL_A_SESS_VLD << VBUS_SENSE_CTL_SHIFT);
+	}
+
+	/*
+	 * PLL Delay CONFIGURATION settings. The following parameters control
+	 * the bring up of the plls.
+	 */
+	val = readl(&usbctlr->utmip_misc_cfg1);
+	clrsetbits_le32(&val, UTMIP_PLLU_STABLE_COUNT_MASK,
+		timing[PARAM_STABLE_COUNT] << UTMIP_PLLU_STABLE_COUNT_SHIFT);
+	clrsetbits_le32(&val, UTMIP_PLL_ACTIVE_DLY_COUNT_MASK,
+		timing[PARAM_ACTIVE_DELAY_COUNT] <<
+			UTMIP_PLL_ACTIVE_DLY_COUNT_SHIFT);
+	writel(val, &usbctlr->utmip_misc_cfg1);
+
+	/* Set PLL enable delay count and crystal frequency count */
+	val = readl(&usbctlr->utmip_pll_cfg1);
+	clrsetbits_le32(&val, UTMIP_PLLU_ENABLE_DLY_COUNT_MASK,
+		timing[PARAM_ENABLE_DELAY_COUNT] <<
+			UTMIP_PLLU_ENABLE_DLY_COUNT_SHIFT);
+	clrsetbits_le32(&val, UTMIP_XTAL_FREQ_COUNT_MASK,
+		timing[PARAM_XTAL_FREQ_COUNT] <<
+			UTMIP_XTAL_FREQ_COUNT_SHIFT);
+	writel(val, &usbctlr->utmip_pll_cfg1);
+
+	/* Setting the tracking length time */
+	clrsetbits_le32(&usbctlr->utmip_bias_cfg1,
+		UTMIP_BIAS_PDTRK_COUNT_MASK,
+		timing[PARAM_BIAS_TIME] << UTMIP_BIAS_PDTRK_COUNT_SHIFT);
+
+	/* Program debounce time for VBUS to become valid */
+	clrsetbits_le32(&usbctlr->utmip_debounce_cfg0,
+		UTMIP_DEBOUNCE_CFG0_MASK,
+		timing[PARAM_DEBOUNCE_A_TIME] << UTMIP_DEBOUNCE_CFG0_SHIFT);
+
+	setbits_le32(&usbctlr->utmip_tx_cfg0, UTMIP_FS_PREAMBLE_J);
+
+	/* Disable battery charge enabling bit */
+	setbits_le32(&usbctlr->utmip_bat_chrg_cfg0, UTMIP_PD_CHRG);
+
+	clrbits_le32(&usbctlr->utmip_xcvr_cfg0, UTMIP_XCVR_LSBIAS_SE);
+	setbits_le32(&usbctlr->utmip_spare_cfg0, FUSE_SETUP_SEL);
+
+	/*
+	 * Configure the UTMIP_IDLE_WAIT and UTMIP_ELASTIC_LIMIT
+	 * Setting these fields, together with default values of the
+	 * other fields, results in programming the registers below as
+	 * follows:
+	 *         UTMIP_HSRX_CFG0 = 0x9168c000
+	 *         UTMIP_HSRX_CFG1 = 0x13
+	 */
+
+	/* Set PLL enable delay count and Crystal frequency count */
+	val = readl(&usbctlr->utmip_hsrx_cfg0);
+	clrsetbits_le32(&val, UTMIP_IDLE_WAIT_MASK,
+		utmip_idle_wait_delay << UTMIP_IDLE_WAIT_SHIFT);
+	clrsetbits_le32(&val, UTMIP_ELASTIC_LIMIT_MASK,
+		utmip_elastic_limit << UTMIP_ELASTIC_LIMIT_SHIFT);
+	writel(val, &usbctlr->utmip_hsrx_cfg0);
+
+	/* Configure the UTMIP_HS_SYNC_START_DLY */
+	clrsetbits_le32(&usbctlr->utmip_hsrx_cfg1,
+		UTMIP_HS_SYNC_START_DLY_MASK,
+		utmip_hs_sync_start_delay << UTMIP_HS_SYNC_START_DLY_SHIFT);
+
+	/* Preceed the crystal clock disable by >100ns delay. */
+	udelay(1);
+
+	/* Resuscitate crystal clock by setting UTMIP_PHY_XTAL_CLOCKEN */
+	setbits_le32(&usbctlr->utmip_misc_cfg1, UTMIP_PHY_XTAL_CLOCKEN);
+
+	/* Finished the per-controller init. */
+
+	/* De-assert UTMIP_RESET to bring out of reset. */
+	clrbits_le32(&usbctlr->susp_ctrl, UTMIP_RESET);
+
+	/* Wait for the phy clock to become valid in 100 ms */
+	for (loop_count = 100000; loop_count != 0; loop_count--) {
+		if (readl(&usbctlr->susp_ctrl) & USB_PHY_CLK_VALID)
+			break;
+		udelay(1);
+	}
+	if (loop_count == 100000)
+		return -1;
+
+	return 0;
+}
+
+static void power_up_port(struct usb_ctlr *usbctlr)
+{
+	/* Deassert power down state */
+	clrbits_le32(&usbctlr->utmip_xcvr_cfg0, UTMIP_FORCE_PD_POWERDOWN |
+		UTMIP_FORCE_PD2_POWERDOWN | UTMIP_FORCE_PDZI_POWERDOWN);
+	clrbits_le32(&usbctlr->utmip_xcvr_cfg1, UTMIP_FORCE_PDDISC_POWERDOWN |
+		UTMIP_FORCE_PDCHRP_POWERDOWN | UTMIP_FORCE_PDDR_POWERDOWN);
+}
+
+static void config_clock(const u32 timing[])
+{
+	clock_start_pll(CLOCK_ID_USB,
+		timing[PARAM_DIVM], timing[PARAM_DIVN], timing[PARAM_DIVP],
+		timing[PARAM_CPCON], timing[PARAM_LFCON]);
+}
+
+/**
+ * Add a new USB port to the list of available ports.
+ *
+ * @param config	USB port configuration
+ * @return 0 if ok, -1 if error (too many ports)
+ */
+static int add_port(struct fdt_usb *config, const u32 timing[])
+{
+	struct usb_ctlr *usbctlr = config->reg;
+
+	if (port_count == USB_PORTS_MAX) {
+		debug("tegrausb: Cannot register more than %d ports\n",
+		      USB_PORTS_MAX);
+		return -1;
+	}
+	if (init_usb_controller(config, usbctlr, timing)) {
+		debug("tegrausb: Cannot init port\n");
+		return -1;
+	}
+	if (config->utmi) {
+		/* Disable ICUSB FS/LS transceiver */
+		clrbits_le32(&usbctlr->icusb_ctrl, IC_ENB1);
+
+		/* Select UTMI parallel interface */
+		clrsetbits_le32(&usbctlr->port_sc1, PTS_MASK,
+				PTS_UTMI << PTS_SHIFT);
+		clrbits_le32(&usbctlr->port_sc1, STS);
+		power_up_port(usbctlr);
+	}
+	port[port_count++] = *config;
+
+	return 0;
+}
+
+int tegrausb_start_port(unsigned portnum, u32 *hccr, u32 *hcor)
+{
+	struct usb_ctlr *usbctlr;
+
+	if (portnum >= port_count)
+		return -1;
+	tegrausb_stop_port();
+	set_host_mode(&port[portnum]);
+
+	usbctlr = port[portnum].reg;
+	*hccr = (u32)&usbctlr->cap_length;
+	*hcor = (u32)&usbctlr->usb_cmd;
+	port_current = portnum;
+	return 0;
+}
+
+int tegrausb_stop_port(void)
+{
+	struct usb_ctlr *usbctlr;
+
+	if (port_current == -1)
+		return -1;
+
+	usbctlr = port[port_current].reg;
+
+	/* Stop controller */
+	writel(0, &usbctlr->usb_cmd);
+	udelay(1000);
+
+	/* Initiate controller reset */
+	writel(2, &usbctlr->usb_cmd);
+	udelay(1000);
+	port_current = -1;
+	return 0;
+}
+
+int fdt_decode_usb(const void *blob, int node, unsigned osc_frequency_mhz,
+		   struct fdt_usb *config)
+{
+	const char *phy, *mode;
+
+	config->reg = (struct usb_ctlr *)fdtdec_get_addr(blob, node, "reg");
+	mode = fdt_getprop(blob, node, "dr_mode", NULL);
+	if (mode) {
+		if (0 == strcmp(mode, "host"))
+			config->dr_mode = DR_MODE_HOST;
+		else if (0 == strcmp(mode, "peripheral"))
+			config->dr_mode = DR_MODE_DEVICE;
+		else if (0 == strcmp(mode, "otg"))
+			config->dr_mode = DR_MODE_OTG;
+		else {
+			debug("%s: Cannot decode dr_mode '%s'\n", __func__,
+			      mode);
+			return -FDT_ERR_NOTFOUND;
+		}
+	} else {
+		config->dr_mode = DR_MODE_HOST;
+	}
+
+	phy = fdt_getprop(blob, node, "phy_type", NULL);
+	config->utmi = phy && 0 == strcmp("utmi", phy);
+	config->enabled = fdtdec_get_is_enabled(blob, node);
+	config->has_legacy_mode = fdtdec_get_bool(blob, node,
+						  "nvidia,has-legacy-mode");
+	config->periph_id = clock_decode_periph_id(blob, node);
+	if (config->periph_id == PERIPH_ID_NONE) {
+		debug("%s: Missing/invalid peripheral ID\n", __func__);
+		return -FDT_ERR_NOTFOUND;
+	}
+	fdtdec_decode_gpio(blob, node, "nvidia,vbus-gpio", &config->vbus_gpio);
+	debug("enabled=%d, legacy_mode=%d, utmi=%d, periph_id=%d, vbus=%d, "
+	      "dr_mode=%d\n", config->enabled, config->has_legacy_mode,
+	      config->utmi, config->periph_id, config->vbus_gpio.gpio,
+	      config->dr_mode);
+
+	return 0;
+}
+
+int board_usb_init(const void *blob)
+{
+	struct fdt_usb config;
+	unsigned osc_freq = clock_get_rate(CLOCK_ID_OSC);
+	enum clock_osc_freq freq;
+	int node_list[USB_PORTS_MAX];
+	int node, count, i;
+
+	/* Set up the USB clocks correctly based on our oscillator frequency */
+	freq = clock_get_osc_freq();
+	config_clock(usb_pll[freq]);
+
+	/* count may return <0 on error */
+	count = fdtdec_find_aliases_for_id(blob, "usb",
+			COMPAT_NVIDIA_TEGRA20_USB, node_list, USB_PORTS_MAX);
+	for (i = 0; i < count; i++) {
+		debug("USB %d: ", i);
+		node = node_list[i];
+		if (!node)
+			continue;
+		if (fdt_decode_usb(blob, node, osc_freq, &config)) {
+			debug("Cannot decode USB node %s\n",
+			      fdt_get_name(blob, node, NULL));
+			return -1;
+		}
+
+		if (add_port(&config, usb_pll[freq]))
+			return -1;
+		set_host_mode(&config);
+	}
+	port_current = -1;
+
+	return 0;
+}
diff --git a/arch/arm/include/asm/arch-tegra2/tegra2.h b/arch/arm/include/asm/arch-tegra2/tegra2.h
index 8941443..baae2eb 100644
--- a/arch/arm/include/asm/arch-tegra2/tegra2.h
+++ b/arch/arm/include/asm/arch-tegra2/tegra2.h
@@ -41,6 +41,8 @@
 #define TEGRA2_SPI_BASE		(NV_PA_APB_MISC_BASE + 0xC380)
 #define NV_PA_PMC_BASE		0x7000E400
 #define NV_PA_CSITE_BASE	0x70040000
+#define TEGRA_USB1_BASE		0xC5000000
+#define TEGRA_USB3_BASE		0xC5008000
 
 #define TEGRA2_SDRC_CS0		NV_PA_SDRAM_BASE
 #define LOW_LEVEL_SRAM_STACK	0x4000FFFC
diff --git a/arch/arm/include/asm/arch-tegra2/usb.h b/arch/arm/include/asm/arch-tegra2/usb.h
new file mode 100644
index 0000000..638033b
--- /dev/null
+++ b/arch/arm/include/asm/arch-tegra2/usb.h
@@ -0,0 +1,252 @@
+/*
+ * Copyright (c) 2011 The Chromium OS Authors.
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _TEGRA_USB_H_
+#define _TEGRA_USB_H_
+
+
+/* USB Controller (USBx_CONTROLLER_) regs */
+struct usb_ctlr {
+	/* 0x000 */
+	uint id;
+	uint reserved0;
+	uint host;
+	uint device;
+
+	/* 0x010 */
+	uint txbuf;
+	uint rxbuf;
+	uint reserved1[2];
+
+	/* 0x020 */
+	uint reserved2[56];
+
+	/* 0x100 */
+	u16 cap_length;
+	u16 hci_version;
+	uint hcs_params;
+	uint hcc_params;
+	uint reserved3[5];
+
+	/* 0x120 */
+	uint dci_version;
+	uint dcc_params;
+	uint reserved4[6];
+
+	/* 0x140 */
+	uint usb_cmd;
+	uint usb_sts;
+	uint usb_intr;
+	uint frindex;
+
+	/* 0x150 */
+	uint reserved5;
+	uint periodic_list_base;
+	uint async_list_addr;
+	uint async_tt_sts;
+
+	/* 0x160 */
+	uint burst_size;
+	uint tx_fill_tuning;
+	uint reserved6;   /* is this port_sc1 on some controllers? */
+	uint icusb_ctrl;
+
+	/* 0x170 */
+	uint ulpi_viewport;
+	uint reserved7;
+	uint endpt_nak;
+	uint endpt_nak_enable;
+
+	/* 0x180 */
+	uint reserved;
+	uint port_sc1;
+	uint reserved8[6];
+
+	/* 0x1a0 */
+	uint reserved9;
+	uint otgsc;
+	uint usb_mode;
+	uint endpt_setup_stat;
+
+	/* 0x1b0 */
+	uint reserved10[20];
+
+	/* 0x200 */
+	uint reserved11[0x80];
+
+	/* 0x400 */
+	uint susp_ctrl;
+	uint phy_vbus_sensors;
+	uint phy_vbus_wakeup_id;
+	uint phy_alt_vbus_sys;
+
+	/* 0x410 */
+	uint usb1_legacy_ctrl;
+	uint reserved12[3];
+
+	/* 0x420 */
+	uint reserved13[56];
+
+	/* 0x500 */
+	uint reserved14[64 * 3];
+
+	/* 0x800 */
+	uint utmip_pll_cfg0;
+	uint utmip_pll_cfg1;
+	uint utmip_xcvr_cfg0;
+	uint utmip_bias_cfg0;
+
+	/* 0x810 */
+	uint utmip_hsrx_cfg0;
+	uint utmip_hsrx_cfg1;
+	uint utmip_fslsrx_cfg0;
+	uint utmip_fslsrx_cfg1;
+
+	/* 0x820 */
+	uint utmip_tx_cfg0;
+	uint utmip_misc_cfg0;
+	uint utmip_misc_cfg1;
+	uint utmip_debounce_cfg0;
+
+	/* 0x830 */
+	uint utmip_bat_chrg_cfg0;
+	uint utmip_spare_cfg0;
+	uint utmip_xcvr_cfg1;
+	uint utmip_bias_cfg1;
+};
+
+
+/* USB1_LEGACY_CTRL */
+#define USB1_NO_LEGACY_MODE		1
+
+#define VBUS_SENSE_CTL_SHIFT			1
+#define VBUS_SENSE_CTL_MASK			(3 << VBUS_SENSE_CTL_SHIFT)
+#define VBUS_SENSE_CTL_VBUS_WAKEUP		0
+#define VBUS_SENSE_CTL_AB_SESS_VLD_OR_VBUS_WAKEUP	1
+#define VBUS_SENSE_CTL_AB_SESS_VLD		2
+#define VBUS_SENSE_CTL_A_SESS_VLD		3
+
+/* USBx_IF_USB_SUSP_CTRL_0 */
+#define UTMIP_PHY_ENB			        (1 << 12)
+#define UTMIP_RESET			        (1 << 11)
+#define USB_PHY_CLK_VALID			(1 << 7)
+
+/* USBx_UTMIP_MISC_CFG1 */
+#define UTMIP_PLLU_STABLE_COUNT_SHIFT		6
+#define UTMIP_PLLU_STABLE_COUNT_MASK		\
+				(0xfff << UTMIP_PLLU_STABLE_COUNT_SHIFT)
+#define UTMIP_PLL_ACTIVE_DLY_COUNT_SHIFT	18
+#define UTMIP_PLL_ACTIVE_DLY_COUNT_MASK		\
+				(0x1f << UTMIP_PLL_ACTIVE_DLY_COUNT_SHIFT)
+#define UTMIP_PHY_XTAL_CLOCKEN			(1 << 30)
+
+/* USBx_UTMIP_PLL_CFG1_0 */
+#define UTMIP_PLLU_ENABLE_DLY_COUNT_SHIFT	27
+#define UTMIP_PLLU_ENABLE_DLY_COUNT_MASK	\
+				(0xf << UTMIP_PLLU_ENABLE_DLY_COUNT_SHIFT)
+#define UTMIP_XTAL_FREQ_COUNT_SHIFT		0
+#define UTMIP_XTAL_FREQ_COUNT_MASK		0xfff
+
+/* USBx_UTMIP_BIAS_CFG1_0 */
+#define UTMIP_BIAS_PDTRK_COUNT_SHIFT		3
+#define UTMIP_BIAS_PDTRK_COUNT_MASK		\
+				(0x1f << UTMIP_BIAS_PDTRK_COUNT_SHIFT)
+
+#define UTMIP_DEBOUNCE_CFG0_SHIFT		0
+#define UTMIP_DEBOUNCE_CFG0_MASK		0xffff
+
+/* USBx_UTMIP_TX_CFG0_0 */
+#define UTMIP_FS_PREAMBLE_J			(1 << 19)
+
+/* USBx_UTMIP_BAT_CHRG_CFG0_0 */
+#define UTMIP_PD_CHRG				1
+
+/* USBx_UTMIP_XCVR_CFG0_0 */
+#define UTMIP_XCVR_LSBIAS_SE			(1 << 21)
+
+/* USBx_UTMIP_SPARE_CFG0_0 */
+#define FUSE_SETUP_SEL				(1 << 3)
+
+/* USBx_UTMIP_HSRX_CFG0_0 */
+#define UTMIP_IDLE_WAIT_SHIFT			15
+#define UTMIP_IDLE_WAIT_MASK			(0x1f << UTMIP_IDLE_WAIT_SHIFT)
+#define UTMIP_ELASTIC_LIMIT_SHIFT		10
+#define UTMIP_ELASTIC_LIMIT_MASK		\
+				(0x1f << UTMIP_ELASTIC_LIMIT_SHIFT)
+
+/* USBx_UTMIP_HSRX_CFG0_1 */
+#define UTMIP_HS_SYNC_START_DLY_SHIFT		1
+#define UTMIP_HS_SYNC_START_DLY_MASK		\
+				(0xf << UTMIP_HS_SYNC_START_DLY_SHIFT)
+
+/* USBx_CONTROLLER_2_USB2D_ICUSB_CTRL_0 */
+#define IC_ENB1					(1 << 3)
+
+/* SB2_CONTROLLER_2_USB2D_PORTSC1_0 */
+#define PTS_SHIFT				30
+#define PTS_MASK				(3U << PTS_SHIFT)
+#define PTS_UTMI	0
+#define PTS_RESERVED	1
+#define PTS_ULP		2
+#define PTS_ICUSB_SER	3
+
+#define STS					(1 << 29)
+
+/* USBx_UTMIP_XCVR_CFG0_0 */
+#define UTMIP_FORCE_PD_POWERDOWN		(1 << 14)
+#define UTMIP_FORCE_PD2_POWERDOWN		(1 << 16)
+#define UTMIP_FORCE_PDZI_POWERDOWN		(1 << 18)
+
+/* USBx_UTMIP_XCVR_CFG1_0 */
+#define UTMIP_FORCE_PDDISC_POWERDOWN		(1 << 0)
+#define UTMIP_FORCE_PDCHRP_POWERDOWN		(1 << 2)
+#define UTMIP_FORCE_PDDR_POWERDOWN		(1 << 4)
+
+/* USB3_IF_USB_PHY_VBUS_SENSORS_0 */
+#define VBUS_VLD_STS			(1 << 26)
+
+
+/* Change the USB host port into host mode */
+void usb_set_host_mode(void);
+
+/* Setup USB on the board */
+int board_usb_init(const void *blob);
+
+/**
+ * Start up the given port number (ports are numbered from 0 on each board).
+ * This returns values for the appropriate hccr and hcor addresses to use for
+ * USB EHCI operations.
+ *
+ * @param portnum	port number to start
+ * @param hccr		returns start address of EHCI HCCR registers
+ * @param hcor		returns start address of EHCI HCOR registers
+ * @return 0 if ok, -1 on error (generally invalid port number)
+ */
+int tegrausb_start_port(unsigned portnum, u32 *hccr, u32 *hcor);
+
+/**
+ * Stop the current port
+ *
+ * @return 0 if ok, -1 if no port was active
+ */
+int tegrausb_stop_port(void);
+
+#endif	/* _TEGRA_USB_H_ */
diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile
index 53ad70a..0d4657e 100644
--- a/drivers/usb/host/Makefile
+++ b/drivers/usb/host/Makefile
@@ -50,6 +50,7 @@ COBJS-$(CONFIG_USB_EHCI_PPC4XX) += ehci-ppc4xx.o
 COBJS-$(CONFIG_USB_EHCI_IXP4XX) += ehci-ixp.o
 COBJS-$(CONFIG_USB_EHCI_MARVELL) += ehci-marvell.o
 COBJS-$(CONFIG_USB_EHCI_PCI) += ehci-pci.o
+COBJS-$(CONFIG_USB_EHCI_TEGRA) += ehci-tegra.o
 COBJS-$(CONFIG_USB_EHCI_VCT) += ehci-vct.o
 
 COBJS	:= $(COBJS-y)
diff --git a/drivers/usb/host/ehci-tegra.c b/drivers/usb/host/ehci-tegra.c
new file mode 100644
index 0000000..a7e105b
--- /dev/null
+++ b/drivers/usb/host/ehci-tegra.c
@@ -0,0 +1,62 @@
+/*
+ * Copyright (c) 2009 NVIDIA Corporation
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <usb.h>
+
+#include "ehci.h"
+#include "ehci-core.h"
+
+#include <asm/errno.h>
+#include <asm/arch/usb.h>
+
+
+/*
+ * Create the appropriate control structures to manage
+ * a new EHCI host controller.
+ */
+int ehci_hcd_init(void)
+{
+	u32 our_hccr, our_hcor;
+
+	/*
+	 * Select the first port, as we don't have a way of selecting others
+	 * yet
+	 */
+	if (tegrausb_start_port(0, &our_hccr, &our_hcor))
+		return -1;
+
+	hccr = (struct ehci_hccr *)our_hccr;
+	hcor = (struct ehci_hcor *)our_hcor;
+
+	return 0;
+}
+
+/*
+ * Destroy the appropriate control structures corresponding
+ * the the EHCI host controller.
+ */
+int ehci_hcd_stop(void)
+{
+	tegrausb_stop_port();
+	return 0;
+}
diff --git a/include/fdtdec.h b/include/fdtdec.h
index 2f3842d..bde9873 100644
--- a/include/fdtdec.h
+++ b/include/fdtdec.h
@@ -57,6 +57,7 @@ struct fdt_memory {
  */
 enum fdt_compat_id {
 	COMPAT_UNKNOWN,
+	COMPAT_NVIDIA_TEGRA20_USB,	/* Tegra2 USB port */
 
 	COMPAT_COUNT,
 };
diff --git a/lib/fdtdec.c b/lib/fdtdec.c
index de83226..4ca442a 100644
--- a/lib/fdtdec.c
+++ b/lib/fdtdec.c
@@ -37,6 +37,7 @@ DECLARE_GLOBAL_DATA_PTR;
 #define COMPAT(id, name) name
 static const char * const compat_names[COMPAT_COUNT] = {
 	COMPAT(UNKNOWN, "<none>"),
+	COMPAT(NVIDIA_TEGRA20_USB, "nvidia,tegra20-ehci"),
 };
 
 const char *fdtdec_get_compatible(enum fdt_compat_id id)