powerpc: P1014: Drop configuration for P1014

P1014 is a variant of P1010. There is no P1014 target configured.
Drop related macros. P1014 SoC is still supported.

Signed-off-by: York Sun <york.sun@nxp.com>

5 files changed, 3 insertions, 23 deletions

diff --git a/arch/powerpc/cpu/mpc85xx/Makefile b/arch/powerpc/cpu/mpc85xx/Makefile
index 707d784..b52cf79 100644
--- a/arch/powerpc/cpu/mpc85xx/Makefile
+++ b/arch/powerpc/cpu/mpc85xx/Makefile
@@ -74,7 +74,6 @@ obj-$(CONFIG_ARCH_MPC8569) += mpc8569_serdes.o
 obj-$(CONFIG_ARCH_MPC8572) += mpc8572_serdes.o
 obj-$(CONFIG_ARCH_P1010)	+= p1010_serdes.o
 obj-$(CONFIG_ARCH_P1011)	+= p1021_serdes.o
-obj-$(CONFIG_P1014)	+= p1010_serdes.o
 obj-$(CONFIG_P1017)	+= p1023_serdes.o
 obj-$(CONFIG_P1020)	+= p1021_serdes.o
 obj-$(CONFIG_P1021)	+= p1021_serdes.o
diff --git a/arch/powerpc/cpu/mpc85xx/speed.c b/arch/powerpc/cpu/mpc85xx/speed.c
index 83fa04c..4e63859 100644
--- a/arch/powerpc/cpu/mpc85xx/speed.c
+++ b/arch/powerpc/cpu/mpc85xx/speed.c
@@ -707,8 +707,7 @@ int get_clocks (void)
 #ifdef CONFIG_FSL_ESDHC_USE_PERIPHERAL_CLK
 	gd->arch.sdhc_clk = sys_info.freq_sdhc / 2;
 #else
-#if defined(CONFIG_ARCH_MPC8569) || defined(CONFIG_ARCH_P1010) ||\
-       defined(CONFIG_P1014)
+#if defined(CONFIG_ARCH_MPC8569) || defined(CONFIG_ARCH_P1010)
 	gd->arch.sdhc_clk = gd->bus_clk;
 #else
 	gd->arch.sdhc_clk = gd->bus_clk / 2;
diff --git a/arch/powerpc/include/asm/config_mpc85xx.h b/arch/powerpc/include/asm/config_mpc85xx.h
index 5b6c872..31723ea 100644
--- a/arch/powerpc/include/asm/config_mpc85xx.h
+++ b/arch/powerpc/include/asm/config_mpc85xx.h
@@ -183,23 +183,6 @@
 #define CONFIG_SYS_FSL_ERRATUM_A004508
 #define CONFIG_SYS_FSL_ERRATUM_A005125
 
-#elif defined(CONFIG_P1014)
-#define CONFIG_MAX_CPUS			1
-#define CONFIG_FSL_SDHC_V2_3
-#define CONFIG_SYS_FSL_NUM_LAWS		12
-#define CONFIG_SYS_PPC_E500_DEBUG_TLB	3
-#define CONFIG_TSECV2
-#define CONFIG_SYS_FSL_SEC_COMPAT	4
-#define CONFIG_SYS_FSL_ERRATUM_ESDHC111
-#define CONFIG_NUM_DDR_CONTROLLERS	1
-#define CONFIG_USB_MAX_CONTROLLER_COUNT	1
-#define CONFIG_SYS_CCSRBAR_DEFAULT	0xff700000
-#define CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY
-#define CONFIG_SYS_FSL_ERRATUM_IFC_A002769
-#define CONFIG_SYS_FSL_ERRATUM_P1010_A003549
-#define CONFIG_SYS_FSL_ERRATUM_IFC_A003399
-#define CONFIG_SYS_FSL_ERRATUM_A004508
-
 /* P1017 is single core version of P1023 */
 #elif defined(CONFIG_P1017)
 #define CONFIG_MAX_CPUS			1
diff --git a/arch/powerpc/include/asm/immap_85xx.h b/arch/powerpc/include/asm/immap_85xx.h
index c82daab..222bb4c 100644
--- a/arch/powerpc/include/asm/immap_85xx.h
+++ b/arch/powerpc/include/asm/immap_85xx.h
@@ -2222,7 +2222,7 @@ typedef struct ccsr_gur {
 	u32	gpindr;		/* General-purpose input data */
 	u8	res5[12];
 	u32	pmuxcr;		/* Alt. function signal multiplex control */
-#if defined(CONFIG_ARCH_P1010) || defined(CONFIG_P1014)
+#if defined(CONFIG_ARCH_P1010)
 #define MPC85xx_PMUXCR_TSEC1_0_1588		0x40000000
 #define MPC85xx_PMUXCR_TSEC1_0_RES		0xC0000000
 #define MPC85xx_PMUXCR_TSEC1_1_1588_TRIG	0x10000000
@@ -2350,7 +2350,7 @@ typedef struct ccsr_gur {
 #define MPC85xx_PMUXCR_SPI_GPIO			0x00000100
 #endif
 	u32	pmuxcr2;	/* Alt. function signal multiplex control 2 */
-#if defined(CONFIG_ARCH_P1010) || defined(CONFIG_P1014)
+#if defined(CONFIG_ARCH_P1010)
 #define MPC85xx_PMUXCR2_UART_GPIO		0x40000000
 #define MPC85xx_PMUXCR2_UART_TDM		0x80000000
 #define MPC85xx_PMUXCR2_UART_RES		0xC0000000
diff --git a/doc/README.mpc85xx-sd-spi-boot b/doc/README.mpc85xx-sd-spi-boot
index a08db92..b7d57be 100644
--- a/doc/README.mpc85xx-sd-spi-boot
+++ b/doc/README.mpc85xx-sd-spi-boot
@@ -67,7 +67,6 @@ P2010RDB	config_ddr3_1gb_64bit_p2020rdb_pc.dat
 P1020RDB	config_ddr3_1gb_p1_p2_rdb_pc_800M.dat
 P1011RDB	config_ddr3_1gb_p1_p2_rdb_pc_800M.dat
 P1010RDB	config_ddr3_1gb_p1010rdb_800M.dat
-P1014RDB	config_ddr3_1gb_p1014rdb_800M.dat
 P1021RDB	config_ddr3_1gb_p1_p2_rdb_pc_800M.dat
 P1022DS		config_ddr3_2gb_p1022ds.dat
 P1024RDB	config_ddr3_1gb_p1_p2_rdb_pc_667M.dat