Merge git://git.denx.de/u-boot-usb

14 files changed, 203 insertions, 22 deletions

diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index 0ae3de5..85cc96a 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -613,7 +613,7 @@ static void dwc3_core_exit_mode(struct dwc3 *dwc)
 int dwc3_uboot_init(struct dwc3_device *dwc3_dev)
 {
 	struct dwc3		*dwc;
-	struct device		*dev;
+	struct device		*dev = NULL;
 	u8			lpm_nyet_threshold;
 	u8			tx_de_emphasis;
 	u8			hird_threshold;
diff --git a/drivers/usb/dwc3/dwc3-omap.c b/drivers/usb/dwc3/dwc3-omap.c
index ac9a856..3dcc2f4 100644
--- a/drivers/usb/dwc3/dwc3-omap.c
+++ b/drivers/usb/dwc3/dwc3-omap.c
@@ -374,7 +374,7 @@ static void dwc3_omap_set_utmi_mode(struct dwc3_omap *omap, int utmi_mode)
 int dwc3_omap_uboot_init(struct dwc3_omap_device *omap_dev)
 {
 	u32			reg;
-	struct device		*dev;
+	struct device		*dev = NULL;
 	struct dwc3_omap	*omap;
 
 	omap = devm_kzalloc(dev, sizeof(*omap), GFP_KERNEL);
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index 2a2bffe..0096a2f 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -73,4 +73,12 @@ config USB_EHCI_UNIPHIER
 	---help---
 	  Enables support for the on-chip EHCI controller on UniPhier SoCs.
 
+config USB_EHCI_GENERIC
+	bool "Support for generic EHCI USB controller"
+	depends on OF_CONTROL
+	depends on DM_USB
+	default n
+	---help---
+	  Enables support for generic EHCI controller.
+
 endif
diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile
index f70f38c..0b4b458 100644
--- a/drivers/usb/host/Makefile
+++ b/drivers/usb/host/Makefile
@@ -32,6 +32,7 @@ else
 obj-$(CONFIG_USB_EHCI_FSL) += ehci-fsl.o
 endif
 obj-$(CONFIG_USB_EHCI_FARADAY) += ehci-faraday.o
+obj-$(CONFIG_USB_EHCI_GENERIC) += ehci-generic.o
 obj-$(CONFIG_USB_EHCI_EXYNOS) += ehci-exynos.o
 obj-$(CONFIG_USB_EHCI_MXC) += ehci-mxc.o
 obj-$(CONFIG_USB_EHCI_MXS) += ehci-mxs.o
@@ -54,6 +55,7 @@ obj-$(CONFIG_USB_EHCI_ZYNQ) += ehci-zynq.o
 # xhci
 obj-$(CONFIG_USB_XHCI) += xhci.o xhci-mem.o xhci-ring.o
 obj-$(CONFIG_USB_XHCI_DWC3) += xhci-dwc3.o
+obj-$(CONFIG_USB_XHCI_ZYNQMP) += xhci-zynqmp.o
 obj-$(CONFIG_USB_XHCI_KEYSTONE) += xhci-keystone.o
 obj-$(CONFIG_USB_XHCI_EXYNOS) += xhci-exynos5.o
 obj-$(CONFIG_USB_XHCI_FSL) += xhci-fsl.o
diff --git a/drivers/usb/host/ehci-generic.c b/drivers/usb/host/ehci-generic.c
new file mode 100644
index 0000000..1292caa
--- /dev/null
+++ b/drivers/usb/host/ehci-generic.c
@@ -0,0 +1,50 @@
+/*
+ * Copyright (C) 2015 Alexey Brodkin <abrodkin@synopsys.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <dm.h>
+#include "ehci.h"
+
+/*
+ * Even though here we don't explicitly use "struct ehci_ctrl"
+ * ehci_register() expects it to be the first thing that resides in
+ * device's private data.
+ */
+struct generic_ehci {
+	struct ehci_ctrl ctrl;
+};
+
+static int ehci_usb_probe(struct udevice *dev)
+{
+	struct ehci_hccr *hccr = (struct ehci_hccr *)dev_get_addr(dev);
+	struct ehci_hcor *hcor;
+
+	hcor = (struct ehci_hcor *)((uintptr_t)hccr +
+				    HC_LENGTH(ehci_readl(&hccr->cr_capbase)));
+
+	return ehci_register(dev, hccr, hcor, NULL, 0, USB_INIT_HOST);
+}
+
+static int ehci_usb_remove(struct udevice *dev)
+{
+	return ehci_deregister(dev);
+}
+
+static const struct udevice_id ehci_usb_ids[] = {
+	{ .compatible = "generic-ehci" },
+	{ }
+};
+
+U_BOOT_DRIVER(ehci_generic) = {
+	.name	= "ehci_generic",
+	.id	= UCLASS_USB,
+	.of_match = ehci_usb_ids,
+	.probe = ehci_usb_probe,
+	.remove = ehci_usb_remove,
+	.ops	= &ehci_usb_ops,
+	.priv_auto_alloc_size = sizeof(struct generic_ehci),
+	.flags	= DM_FLAG_ALLOC_PRIV_DMA,
+};
diff --git a/drivers/usb/host/ehci-sunxi.c b/drivers/usb/host/ehci-sunxi.c
index 38d5f92..d494ca1 100644
--- a/drivers/usb/host/ehci-sunxi.c
+++ b/drivers/usb/host/ehci-sunxi.c
@@ -87,7 +87,7 @@ static const struct udevice_id ehci_usb_ids[] = {
 	{ }
 };
 
-U_BOOT_DRIVER(usb_ehci) = {
+U_BOOT_DRIVER(ehci_sunxi) = {
 	.name	= "ehci_sunxi",
 	.id	= UCLASS_USB,
 	.of_match = ehci_usb_ids,
diff --git a/drivers/usb/host/xhci-dwc3.c b/drivers/usb/host/xhci-dwc3.c
index c722c50..33961cd 100644
--- a/drivers/usb/host/xhci-dwc3.c
+++ b/drivers/usb/host/xhci-dwc3.c
@@ -44,6 +44,8 @@ void dwc3_core_soft_reset(struct dwc3 *dwc3_reg)
 	/* reset USB3 phy - if required */
 	dwc3_phy_reset(dwc3_reg);
 
+	mdelay(100);
+
 	/* After PHYs are stable we can take Core out of reset state */
 	clrbits_le32(&dwc3_reg->g_ctl, DWC3_GCTL_CORESOFTRESET);
 }
diff --git a/drivers/usb/host/xhci-fsl.c b/drivers/usb/host/xhci-fsl.c
index 6481e07..05f09d7 100644
--- a/drivers/usb/host/xhci-fsl.c
+++ b/drivers/usb/host/xhci-fsl.c
@@ -27,23 +27,6 @@ __weak int __board_usb_init(int index, enum usb_init_type init)
 	return 0;
 }
 
-void usb_phy_reset(struct dwc3 *dwc3_reg)
-{
-	/* Assert USB3 PHY reset */
-	setbits_le32(&dwc3_reg->g_usb3pipectl[0], DWC3_GUSB3PIPECTL_PHYSOFTRST);
-
-	/* Assert USB2 PHY reset */
-	setbits_le32(&dwc3_reg->g_usb2phycfg, DWC3_GUSB2PHYCFG_PHYSOFTRST);
-
-	mdelay(200);
-
-	/* Clear USB3 PHY reset */
-	clrbits_le32(&dwc3_reg->g_usb3pipectl[0], DWC3_GUSB3PIPECTL_PHYSOFTRST);
-
-	/* Clear USB2 PHY reset */
-	clrbits_le32(&dwc3_reg->g_usb2phycfg, DWC3_GUSB2PHYCFG_PHYSOFTRST);
-}
-
 static int fsl_xhci_core_init(struct fsl_xhci *fsl_xhci)
 {
 	int ret = 0;
diff --git a/drivers/usb/host/xhci-omap.c b/drivers/usb/host/xhci-omap.c
index 104e7a7..fd19f79 100644
--- a/drivers/usb/host/xhci-omap.c
+++ b/drivers/usb/host/xhci-omap.c
@@ -27,7 +27,7 @@ DECLARE_GLOBAL_DATA_PTR;
 
 static struct omap_xhci omap;
 
-inline int __board_usb_init(int index, enum usb_init_type init)
+__weak int __board_usb_init(int index, enum usb_init_type init)
 {
 	return 0;
 }
diff --git a/drivers/usb/host/xhci-zynqmp.c b/drivers/usb/host/xhci-zynqmp.c
new file mode 100644
index 0000000..a735369
--- /dev/null
+++ b/drivers/usb/host/xhci-zynqmp.c
@@ -0,0 +1,126 @@
+/*
+ * Copyright 2015 Xilinx, Inc.
+ *
+ * Zynq USB HOST xHCI Controller
+ *
+ * Author: Siva Durga Prasad Paladugu<sivadur@xilinx.com>
+ *
+ * This file was reused from Freescale USB xHCI
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <usb.h>
+#include <asm-generic/errno.h>
+#include <asm/arch-zynqmp/hardware.h>
+#include <linux/compat.h>
+#include <linux/usb/dwc3.h>
+#include "xhci.h"
+
+/* Declare global data pointer */
+DECLARE_GLOBAL_DATA_PTR;
+
+/* Default to the ZYNQMP XHCI defines */
+#define USB3_PWRCTL_CLK_CMD_MASK	0x3FE000
+#define USB3_PWRCTL_CLK_FREQ_MASK	0xFFC
+#define USB3_PHY_PARTIAL_RX_POWERON     BIT(6)
+#define USB3_PHY_RX_POWERON		BIT(14)
+#define USB3_PHY_TX_POWERON		BIT(15)
+#define USB3_PHY_TX_RX_POWERON	(USB3_PHY_RX_POWERON | USB3_PHY_TX_POWERON)
+#define USB3_PWRCTL_CLK_CMD_SHIFT   14
+#define USB3_PWRCTL_CLK_FREQ_SHIFT	22
+
+/* USBOTGSS_WRAPPER definitions */
+#define USBOTGSS_WRAPRESET	BIT(17)
+#define USBOTGSS_DMADISABLE BIT(16)
+#define USBOTGSS_STANDBYMODE_NO_STANDBY BIT(4)
+#define USBOTGSS_STANDBYMODE_SMRT		BIT(5)
+#define USBOTGSS_STANDBYMODE_SMRT_WKUP (0x3 << 4)
+#define USBOTGSS_IDLEMODE_NOIDLE BIT(2)
+#define USBOTGSS_IDLEMODE_SMRT BIT(3)
+#define USBOTGSS_IDLEMODE_SMRT_WKUP (0x3 << 2)
+
+/* USBOTGSS_IRQENABLE_SET_0 bit */
+#define USBOTGSS_COREIRQ_EN	BIT(1)
+
+/* USBOTGSS_IRQENABLE_SET_1 bits */
+#define USBOTGSS_IRQ_SET_1_IDPULLUP_FALL_EN	BIT(1)
+#define USBOTGSS_IRQ_SET_1_DISCHRGVBUS_FALL_EN	BIT(3)
+#define USBOTGSS_IRQ_SET_1_CHRGVBUS_FALL_EN	BIT(4)
+#define USBOTGSS_IRQ_SET_1_DRVVBUS_FALL_EN	BIT(5)
+#define USBOTGSS_IRQ_SET_1_IDPULLUP_RISE_EN	BIT(8)
+#define USBOTGSS_IRQ_SET_1_DISCHRGVBUS_RISE_EN	BIT(11)
+#define USBOTGSS_IRQ_SET_1_CHRGVBUS_RISE_EN	BIT(12)
+#define USBOTGSS_IRQ_SET_1_DRVVBUS_RISE_EN	BIT(13)
+#define USBOTGSS_IRQ_SET_1_OEVT_EN		BIT(16)
+#define USBOTGSS_IRQ_SET_1_DMADISABLECLR_EN	BIT(17)
+
+struct zynqmp_xhci {
+	struct xhci_hccr *hcd;
+	struct dwc3 *dwc3_reg;
+};
+
+static struct zynqmp_xhci zynqmp_xhci;
+
+unsigned long ctr_addr[] = CONFIG_ZYNQMP_XHCI_LIST;
+
+static int zynqmp_xhci_core_init(struct zynqmp_xhci *zynqmp_xhci)
+{
+	int ret = 0;
+
+	ret = dwc3_core_init(zynqmp_xhci->dwc3_reg);
+	if (ret) {
+		debug("%s:failed to initialize core\n", __func__);
+		return ret;
+	}
+
+	/* We are hard-coding DWC3 core to Host Mode */
+	dwc3_set_mode(zynqmp_xhci->dwc3_reg, DWC3_GCTL_PRTCAP_HOST);
+
+	return ret;
+}
+
+int xhci_hcd_init(int index, struct xhci_hccr **hccr, struct xhci_hcor **hcor)
+{
+	struct zynqmp_xhci *ctx = &zynqmp_xhci;
+	int ret = 0;
+	uint32_t hclen;
+
+	if (index < 0 || index >= ARRAY_SIZE(ctr_addr))
+		return -EINVAL;
+
+	ctx->hcd = (struct xhci_hccr *)ctr_addr[index];
+	ctx->dwc3_reg = (struct dwc3 *)((void *)ctx->hcd + DWC3_REG_OFFSET);
+
+	ret = board_usb_init(index, USB_INIT_HOST);
+	if (ret != 0) {
+		puts("Failed to initialize board for USB\n");
+		return ret;
+	}
+
+	ret = zynqmp_xhci_core_init(ctx);
+	if (ret < 0) {
+		puts("Failed to initialize xhci\n");
+		return ret;
+	}
+
+	*hccr = (struct xhci_hccr *)ctx->hcd;
+	hclen = HC_LENGTH(xhci_readl(&(*hccr)->cr_capbase));
+	*hcor = (struct xhci_hcor *)((uintptr_t) *hccr + hclen);
+
+	debug("zynqmp-xhci: init hccr %p and hcor %p hc_length %d\n",
+	      *hccr, *hcor, hclen);
+
+	return ret;
+}
+
+void xhci_hcd_stop(int index)
+{
+	/*
+	 * Currently zynqmp socs do not support PHY shutdown from
+	 * sw. But this support may be added in future socs.
+	 */
+
+	return;
+}
diff --git a/include/configs/xilinx_zynqmp.h b/include/configs/xilinx_zynqmp.h
index 6b8b9f8..474bbaf 100644
--- a/include/configs/xilinx_zynqmp.h
+++ b/include/configs/xilinx_zynqmp.h
@@ -107,6 +107,14 @@
 #define CONFIG_SYS_LOAD_ADDR		0x8000000
 
 #if defined(CONFIG_ZYNQMP_USB)
+#define CONFIG_USB_XHCI_DWC3
+#define CONFIG_USB_XHCI
+#define CONFIG_USB_MAX_CONTROLLER_COUNT         1
+#define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS      2
+#define CONFIG_CMD_USB
+#define CONFIG_USB_STORAGE
+#define CONFIG_USB_XHCI_ZYNQMP
+
 #define CONFIG_USB_DWC3
 #define CONFIG_USB_DWC3_GADGET
 
diff --git a/include/configs/xilinx_zynqmp_ep.h b/include/configs/xilinx_zynqmp_ep.h
index 8bdb5c9..b7d506e 100644
--- a/include/configs/xilinx_zynqmp_ep.h
+++ b/include/configs/xilinx_zynqmp_ep.h
@@ -24,6 +24,8 @@
 #define CONFIG_SYS_I2C_ZYNQ
 #define CONFIG_ZYNQ_EEPROM
 #define CONFIG_AHCI
+#define CONFIG_ZYNQMP_XHCI_LIST {ZYNQMP_USB0_XHCI_BASEADDR, \
+				 ZYNQMP_USB1_XHCI_BASEADDR}
 
 #include <configs/xilinx_zynqmp.h>
 
diff --git a/include/fsl_usb.h b/include/fsl_usb.h
index 8e3dded..187e384 100644
--- a/include/fsl_usb.h
+++ b/include/fsl_usb.h
@@ -181,6 +181,7 @@ static inline bool has_erratum_a007792(void)
 	switch (soc) {
 	case SVR_T4240:
 	case SVR_T4160:
+	case SVR_T4080:
 		return IS_SVR_REV(svr, 2, 0);
 	case SVR_T1024:
 	case SVR_T1023:
diff --git a/include/linux/usb/dwc3.h b/include/linux/usb/dwc3.h
index dd934a0..6d1e365 100644
--- a/include/linux/usb/dwc3.h
+++ b/include/linux/usb/dwc3.h
@@ -204,7 +204,6 @@ struct dwc3 {					/* offset: 0xC100 */
 void dwc3_set_mode(struct dwc3 *dwc3_reg, u32 mode);
 void dwc3_core_soft_reset(struct dwc3 *dwc3_reg);
 int dwc3_core_init(struct dwc3 *dwc3_reg);
-void usb_phy_reset(struct dwc3 *dwc3_reg);
 void dwc3_set_fladj(struct dwc3 *dwc3_reg, u32 val);
 #endif
 #endif /* __DWC3_H_ */