summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorHans de Goede <hdegoede@redhat.com>2015-08-15 13:17:49 +0200
committerHans de Goede <hdegoede@redhat.com>2015-08-31 08:43:42 +0200
commit022a99d8b2f84e6bda44e6dcfd1748219b665143 (patch)
tree25adf4c6ac41f656b2bf935a572afbed2764c3bf
parent008ac1dfe0815476cca819c16e06616c12c303b7 (diff)
downloadu-boot-imx-022a99d8b2f84e6bda44e6dcfd1748219b665143.zip
u-boot-imx-022a99d8b2f84e6bda44e6dcfd1748219b665143.tar.gz
u-boot-imx-022a99d8b2f84e6bda44e6dcfd1748219b665143.tar.bz2
sunxi_nand_spl: Add support for sun4i and sun5i SoCs
Other then having a few less chip-select lines the nand controller on sun4i, sun5i and sun7i is identical. Note this patch also muxes GPC7 to the NAND on sun7i where as before it was not muxed this way. GPC7 is a standard NAND pin, so it should always be muxed to the NAND when in use. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
-rw-r--r--board/sunxi/board.c12
-rw-r--r--drivers/mtd/nand/Kconfig4
2 files changed, 11 insertions, 5 deletions
diff --git a/board/sunxi/board.c b/board/sunxi/board.c
index 1ebd0a4..d411e96 100644
--- a/board/sunxi/board.c
+++ b/board/sunxi/board.c
@@ -112,13 +112,19 @@ int dram_init(void)
static void nand_pinmux_setup(void)
{
unsigned int pin;
- for (pin = SUNXI_GPC(0); pin <= SUNXI_GPC(6); pin++)
- sunxi_gpio_set_cfgpin(pin, SUNXI_GPC_NAND);
- for (pin = SUNXI_GPC(8); pin <= SUNXI_GPC(22); pin++)
+ for (pin = SUNXI_GPC(0); pin <= SUNXI_GPC(19); pin++)
sunxi_gpio_set_cfgpin(pin, SUNXI_GPC_NAND);
+#if defined CONFIG_MACH_SUN4I || defined CONFIG_MACH_SUN7I
+ for (pin = SUNXI_GPC(20); pin <= SUNXI_GPC(22); pin++)
+ sunxi_gpio_set_cfgpin(pin, SUNXI_GPC_NAND);
+#endif
+ /* sun4i / sun7i do have a PC23, but it is not used for nand,
+ * only sun7i has a PC24 */
+#ifdef CONFIG_MACH_SUN7I
sunxi_gpio_set_cfgpin(SUNXI_GPC(24), SUNXI_GPC_NAND);
+#endif
}
static void nand_clock_setup(void)
diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
index 28597f0..8fac5e8 100644
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -93,8 +93,8 @@ config SPL_NAND_DENALI
for use on SPL.
config SPL_NAND_SUNXI
- bool "Support for NAND on Allwinner A20 in SPL"
- depends on MACH_SUN7I
+ bool "Support for NAND on Allwinner SoCs in SPL"
+ depends on MACH_SUN4I || MACH_SUN5I || MACH_SUN7I
select SYS_NAND_SELF_INIT
---help---
Enable support for NAND. This option allows SPL to read from