Merge branch 'master' of git://git.denx.de/u-boot

239 files changed, 6327 insertions, 8296 deletions

diff --git a/MAINTAINERS b/MAINTAINERS
index 28c052d..d3ed390 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -27,6 +27,10 @@ Poonam Aggrwal <poonam.aggrwal@freescale.com>
 
 	BSC9131RDB	BSC9131
 
+Naveen Burmi <NaveenBurmi@freescale.com>
+
+	BSC9132QDS	BSC9132
+
 Greg Allen <gallen@arlut.utexas.edu>
 
 	UTX8245		MPC8245
diff --git a/arch/arm/cpu/arm1136/mx31/timer.c b/arch/arm/cpu/arm1136/mx31/timer.c
index 86916d1..b006b60 100644
--- a/arch/arm/cpu/arm1136/mx31/timer.c
+++ b/arch/arm/cpu/arm1136/mx31/timer.c
@@ -115,13 +115,13 @@ unsigned long long get_ticks(void)
 {
 	ulong now = GPTCNT; /* current tick value */
 
-	if (now >= gd->lastinc)	/* normal mode (non roll) */
+	if (now >= gd->arch.lastinc)	/* normal mode (non roll) */
 		/* move stamp forward with absolut diff ticks */
-		gd->tbl += (now - gd->lastinc);
+		gd->arch.tbl += (now - gd->arch.lastinc);
 	else			/* we have rollover of incrementer */
-		gd->tbl += (0xFFFFFFFF - gd->lastinc) + now;
-	gd->lastinc = now;
-	return gd->tbl;
+		gd->arch.tbl += (0xFFFFFFFF - gd->arch.lastinc) + now;
+	gd->arch.lastinc = now;
+	return gd->arch.tbl;
 }
 
 ulong get_timer_masked(void)
diff --git a/arch/arm/cpu/arm1136/mx35/generic.c b/arch/arm/cpu/arm1136/mx35/generic.c
index 295a98e..d11e6f6 100644
--- a/arch/arm/cpu/arm1136/mx35/generic.c
+++ b/arch/arm/cpu/arm1136/mx35/generic.c
@@ -478,11 +478,11 @@ int get_clocks(void)
 {
 #ifdef CONFIG_FSL_ESDHC
 #if CONFIG_SYS_FSL_ESDHC_ADDR == MMC_SDHC2_BASE_ADDR
-	gd->sdhc_clk = mxc_get_clock(MXC_ESDHC2_CLK);
+	gd->arch.sdhc_clk = mxc_get_clock(MXC_ESDHC2_CLK);
 #elif CONFIG_SYS_FSL_ESDHC_ADDR == MMC_SDHC3_BASE_ADDR
-	gd->sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK);
+	gd->arch.sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK);
 #else
-	gd->sdhc_clk = mxc_get_clock(MXC_ESDHC1_CLK);
+	gd->arch.sdhc_clk = mxc_get_clock(MXC_ESDHC1_CLK);
 #endif
 #endif
 	return 0;
diff --git a/arch/arm/cpu/arm1136/mx35/timer.c b/arch/arm/cpu/arm1136/mx35/timer.c
index 9680b7f..584ad15 100644
--- a/arch/arm/cpu/arm1136/mx35/timer.c
+++ b/arch/arm/cpu/arm1136/mx35/timer.c
@@ -32,8 +32,8 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
-#define timestamp	(gd->tbl)
-#define lastinc		(gd->lastinc)
+#define timestamp	(gd->arch.tbl)
+#define lastinc		(gd->arch.lastinc)
 
 /* General purpose timers bitfields */
 #define GPTCR_SWR       (1<<15)	/* Software reset */
diff --git a/arch/arm/cpu/arm1136/omap24xx/timer.c b/arch/arm/cpu/arm1136/omap24xx/timer.c
index e929ae4..53015cb 100644
--- a/arch/arm/cpu/arm1136/omap24xx/timer.c
+++ b/arch/arm/cpu/arm1136/omap24xx/timer.c
@@ -51,8 +51,8 @@ int timer_init (void)
 	*((int32_t *) (CONFIG_SYS_TIMERBASE + TCLR)) = val;	/* start timer */
 
 	/* reset time */
-	gd->lastinc = READ_TIMER;	/* capture current incrementer value */
-	gd->tbl = 0;			/* start "advancing" time stamp */
+	gd->arch.lastinc = READ_TIMER;	/* capture current incrementer value */
+	gd->arch.tbl = 0;		/* start "advancing" time stamp */
 
 	return(0);
 }
@@ -81,8 +81,8 @@ void __udelay (unsigned long usec)
 	tmp = get_timer (0);		/* get current timestamp */
 	if ((tmo + tmp + 1) < tmp) {	/* if setting this forward will roll */
 					/* time stamp, then reset time */
-		gd->lastinc = READ_TIMER;	/* capture incrementer value */
-		gd->tbl = 0;			/* start time stamp */
+		gd->arch.lastinc = READ_TIMER;	/* capture incrementer value */
+		gd->arch.tbl = 0;			/* start time stamp */
 	} else {
 		tmo	+= tmp;		/* else, set advancing stamp wake up time */
 	}
@@ -94,12 +94,15 @@ ulong get_timer_masked (void)
 {
 	ulong now = READ_TIMER;		/* current tick value */
 
-	if (now >= gd->lastinc)		/* normal mode (non roll) */
-		gd->tbl += (now - gd->lastinc); /* move stamp fordward with absoulte diff ticks */
-	else				/* we have rollover of incrementer */
-		gd->tbl += (0xFFFFFFFF - gd->lastinc) + now;
-	gd->lastinc = now;
-	return gd->tbl;
+	if (now >= gd->arch.lastinc) {		/* normal mode (non roll) */
+		/* move stamp fordward with absoulte diff ticks */
+		gd->arch.tbl += (now - gd->arch.lastinc);
+	} else {
+		/* we have rollover of incrementer */
+		gd->arch.tbl += (0xFFFFFFFF - gd->arch.lastinc) + now;
+	}
+	gd->arch.lastinc = now;
+	return gd->arch.tbl;
 }
 
 /* waits specified delay value and resets timestamp */
diff --git a/arch/arm/cpu/arm920t/a320/timer.c b/arch/arm/cpu/arm920t/a320/timer.c
index 4bfcef2..512fb9d 100644
--- a/arch/arm/cpu/arm920t/a320/timer.c
+++ b/arch/arm/cpu/arm920t/a320/timer.c
@@ -31,14 +31,14 @@ DECLARE_GLOBAL_DATA_PTR;
 static inline unsigned long long tick_to_time(unsigned long long tick)
 {
 	tick *= CONFIG_SYS_HZ;
-	do_div(tick, gd->timer_rate_hz);
+	do_div(tick, gd->arch.timer_rate_hz);
 
 	return tick;
 }
 
 static inline unsigned long long usec_to_tick(unsigned long long usec)
 {
-	usec *= gd->timer_rate_hz;
+	usec *= gd->arch.timer_rate_hz;
 	do_div(usec, 1000000);
 
 	return usec;
@@ -74,8 +74,8 @@ int timer_init(void)
 	cr |= FTTMR010_TM3_ENABLE;
 	writel(cr, &tmr->cr);
 
-	gd->timer_rate_hz = TIMER_CLOCK;
-	gd->tbu = gd->tbl = 0;
+	gd->arch.timer_rate_hz = TIMER_CLOCK;
+	gd->arch.tbu = gd->arch.tbl = 0;
 
 	return 0;
 }
@@ -89,10 +89,10 @@ unsigned long long get_ticks(void)
 	ulong now = TIMER_LOAD_VAL - readl(&tmr->timer3_counter);
 
 	/* increment tbu if tbl has rolled over */
-	if (now < gd->tbl)
-		gd->tbu++;
-	gd->tbl = now;
-	return (((unsigned long long)gd->tbu) << 32) | gd->tbl;
+	if (now < gd->arch.tbl)
+		gd->arch.tbu++;
+	gd->arch.tbl = now;
+	return (((unsigned long long)gd->arch.tbu) << 32) | gd->arch.tbl;
 }
 
 void __udelay(unsigned long usec)
@@ -126,5 +126,5 @@ ulong get_timer(ulong base)
  */
 ulong get_tbclk(void)
 {
-	return gd->timer_rate_hz;
+	return gd->arch.timer_rate_hz;
 }
diff --git a/arch/arm/cpu/arm920t/at91/clock.c b/arch/arm/cpu/arm920t/at91/clock.c
index 09d2799..696200d 100644
--- a/arch/arm/cpu/arm920t/at91/clock.c
+++ b/arch/arm/cpu/arm920t/at91/clock.c
@@ -29,11 +29,11 @@ static unsigned long at91_css_to_rate(unsigned long css)
 	case AT91_PMC_MCKR_CSS_SLOW:
 		return CONFIG_SYS_AT91_SLOW_CLOCK;
 	case AT91_PMC_MCKR_CSS_MAIN:
-		return gd->main_clk_rate_hz;
+		return gd->arch.main_clk_rate_hz;
 	case AT91_PMC_MCKR_CSS_PLLA:
-		return gd->plla_rate_hz;
+		return gd->arch.plla_rate_hz;
 	case AT91_PMC_MCKR_CSS_PLLB:
-		return gd->pllb_rate_hz;
+		return gd->arch.pllb_rate_hz;
 	}
 
 	return 0;
@@ -124,10 +124,10 @@ int at91_clock_init(unsigned long main_clock)
 		main_clock = tmp * (CONFIG_SYS_AT91_SLOW_CLOCK / 16);
 	}
 #endif
-	gd->main_clk_rate_hz = main_clock;
+	gd->arch.main_clk_rate_hz = main_clock;
 
 	/* report if PLLA is more than mildly overclocked */
-	gd->plla_rate_hz = at91_pll_rate(main_clock, readl(&pmc->pllar));
+	gd->arch.plla_rate_hz = at91_pll_rate(main_clock, readl(&pmc->pllar));
 
 #ifdef CONFIG_USB_ATMEL
 	/*
@@ -136,9 +136,10 @@ int at91_clock_init(unsigned long main_clock)
 	 *
 	 * REVISIT:  assumes MCK doesn't derive from PLLB!
 	 */
-	gd->at91_pllb_usb_init = at91_pll_calc(main_clock, 48000000 * 2) |
+	gd->arch.at91_pllb_usb_init = at91_pll_calc(main_clock, 48000000 * 2) |
 			     AT91_PMC_PLLBR_USBDIV_2;
-	gd->pllb_rate_hz = at91_pll_rate(main_clock, gd->at91_pllb_usb_init);
+	gd->arch.pllb_rate_hz = at91_pll_rate(main_clock,
+					      gd->arch.at91_pllb_usb_init);
 #endif
 
 	/*
@@ -146,13 +147,14 @@ int at91_clock_init(unsigned long main_clock)
 	 * For now, assume this parentage won't change.
 	 */
 	mckr = readl(&pmc->mckr);
-	gd->mck_rate_hz = at91_css_to_rate(mckr & AT91_PMC_MCKR_CSS_MASK);
-	freq = gd->mck_rate_hz;
+	gd->arch.mck_rate_hz = at91_css_to_rate(mckr & AT91_PMC_MCKR_CSS_MASK);
+	freq = gd->arch.mck_rate_hz;
 
 	freq /= (1 << ((mckr & AT91_PMC_MCKR_PRES_MASK) >> 2));	/* prescale */
 	/* mdiv */
-	gd->mck_rate_hz = freq / (1 + ((mckr & AT91_PMC_MCKR_MDIV_MASK) >> 8));
-	gd->cpu_clk_rate_hz = freq;
+	gd->arch.mck_rate_hz = freq /
+			(1 + ((mckr & AT91_PMC_MCKR_MDIV_MASK) >> 8));
+	gd->arch.cpu_clk_rate_hz = freq;
 
 	return 0;
 }
diff --git a/arch/arm/cpu/arm920t/at91/timer.c b/arch/arm/cpu/arm920t/at91/timer.c
index 91607b5..8ce7584 100644
--- a/arch/arm/cpu/arm920t/at91/timer.c
+++ b/arch/arm/cpu/arm920t/at91/timer.c
@@ -63,8 +63,8 @@ int timer_init(void)
 	writel(TIMER_LOAD_VAL, &tc->tc[0].rc);
 
 	writel(AT91_TC_CCR_SWTRG | AT91_TC_CCR_CLKEN, &tc->tc[0].ccr);
-	gd->lastinc = 0;
-	gd->tbl = 0;
+	gd->arch.lastinc = 0;
+	gd->arch.tbl = 0;
 
 	return 0;
 }
@@ -89,16 +89,16 @@ ulong get_timer_raw(void)
 
 	now = readl(&tc->tc[0].cv) & 0x0000ffff;
 
-	if (now >= gd->lastinc) {
+	if (now >= gd->arch.lastinc) {
 		/* normal mode */
-		gd->tbl += now - gd->lastinc;
+		gd->arch.tbl += now - gd->arch.lastinc;
 	} else {
 		/* we have an overflow ... */
-		gd->tbl += now + TIMER_LOAD_VAL - gd->lastinc;
+		gd->arch.tbl += now + TIMER_LOAD_VAL - gd->arch.lastinc;
 	}
-	gd->lastinc = now;
+	gd->arch.lastinc = now;
 
-	return gd->tbl;
+	return gd->arch.tbl;
 }
 
 ulong get_timer_masked(void)
diff --git a/arch/arm/cpu/arm920t/s3c24x0/timer.c b/arch/arm/cpu/arm920t/s3c24x0/timer.c
index d8668be..d76bf18 100644
--- a/arch/arm/cpu/arm920t/s3c24x0/timer.c
+++ b/arch/arm/cpu/arm920t/s3c24x0/timer.c
@@ -45,25 +45,25 @@ int timer_init(void)
 	/* use PWM Timer 4 because it has no output */
 	/* prescaler for Timer 4 is 16 */
 	writel(0x0f00, &timers->tcfg0);
-	if (gd->tbu == 0) {
+	if (gd->arch.tbu == 0) {
 		/*
 		 * for 10 ms clock period @ PCLK with 4 bit divider = 1/2
 		 * (default) and prescaler = 16. Should be 10390
 		 * @33.25MHz and 15625 @ 50 MHz
 		 */
-		gd->tbu = get_PCLK() / (2 * 16 * 100);
-		gd->timer_rate_hz = get_PCLK() / (2 * 16);
+		gd->arch.tbu = get_PCLK() / (2 * 16 * 100);
+		gd->arch.timer_rate_hz = get_PCLK() / (2 * 16);
 	}
 	/* load value for 10 ms timeout */
-	writel(gd->tbu, &timers->tcntb4);
+	writel(gd->arch.tbu, &timers->tcntb4);
 	/* auto load, manual update of timer 4 */
 	tmr = (readl(&timers->tcon) & ~0x0700000) | 0x0600000;
 	writel(tmr, &timers->tcon);
 	/* auto load, start timer 4 */
 	tmr = (tmr & ~0x0700000) | 0x0500000;
 	writel(tmr, &timers->tcon);
-	gd->lastinc = 0;
-	gd->tbl = 0;
+	gd->arch.lastinc = 0;
+	gd->arch.tbl = 0;
 
 	return 0;
 }
@@ -82,7 +82,7 @@ void __udelay (unsigned long usec)
 	ulong start = get_ticks();
 
 	tmo = usec / 1000;
-	tmo *= (gd->tbu * 100);
+	tmo *= (gd->arch.tbu * 100);
 	tmo /= 1000;
 
 	while ((ulong) (get_ticks() - start) < tmo)
@@ -93,7 +93,7 @@ ulong get_timer_masked(void)
 {
 	ulong tmr = get_ticks();
 
-	return tmr / (gd->timer_rate_hz / CONFIG_SYS_HZ);
+	return tmr / (gd->arch.timer_rate_hz / CONFIG_SYS_HZ);
 }
 
 void udelay_masked(unsigned long usec)
@@ -104,10 +104,10 @@ void udelay_masked(unsigned long usec)
 
 	if (usec >= 1000) {
 		tmo = usec / 1000;
-		tmo *= (gd->tbu * 100);
+		tmo *= (gd->arch.tbu * 100);
 		tmo /= 1000;
 	} else {
-		tmo = usec * (gd->tbu * 100);
+		tmo = usec * (gd->arch.tbu * 100);
 		tmo /= (1000 * 1000);
 	}
 
@@ -128,16 +128,16 @@ unsigned long long get_ticks(void)
 	struct s3c24x0_timers *timers = s3c24x0_get_base_timers();
 	ulong now = readl(&timers->tcnto4) & 0xffff;
 
-	if (gd->lastinc >= now) {
+	if (gd->arch.lastinc >= now) {
 		/* normal mode */
-		gd->tbl += gd->lastinc - now;
+		gd->arch.tbl += gd->arch.lastinc - now;
 	} else {
 		/* we have an overflow ... */
-		gd->tbl += gd->lastinc + gd->tbu - now;
+		gd->arch.tbl += gd->arch.lastinc + gd->arch.tbu - now;
 	}
-	gd->lastinc = now;
+	gd->arch.lastinc = now;
 
-	return gd->tbl;
+	return gd->arch.tbl;
 }
 
 /*
diff --git a/arch/arm/cpu/arm926ejs/armada100/timer.c b/arch/arm/cpu/arm926ejs/armada100/timer.c
index 355cd6d..948607f 100644
--- a/arch/arm/cpu/arm926ejs/armada100/timer.c
+++ b/arch/arm/cpu/arm926ejs/armada100/timer.c
@@ -61,7 +61,7 @@ struct armd1tmr_registers {
 #define	COUNT_RD_REQ		0x1
 
 DECLARE_GLOBAL_DATA_PTR;
-/* Using gd->tbu from timestamp and gd->tbl for lastdec */
+/* Using gd->arch.tbu from timestamp and gd->arch.tbl for lastdec */
 
 /* For preventing risk of instability in reading counter value,
  * first set read request to register cvwr and then read same
@@ -82,16 +82,16 @@ ulong get_timer_masked(void)
 {
 	ulong now = read_timer();
 
-	if (now >= gd->tbl) {
+	if (now >= gd->arch.tbl) {
 		/* normal mode */
-		gd->tbu += now - gd->tbl;
+		gd->arch.tbu += now - gd->arch.tbl;
 	} else {
 		/* we have an overflow ... */
-		gd->tbu += now + TIMER_LOAD_VAL - gd->tbl;
+		gd->arch.tbu += now + TIMER_LOAD_VAL - gd->arch.tbl;
 	}
-	gd->tbl = now;
+	gd->arch.tbl = now;
 
-	return gd->tbu;
+	return gd->arch.tbu;
 }
 
 ulong get_timer(ulong base)
@@ -135,9 +135,9 @@ int timer_init(void)
 
 	/* Enable timer 0 */
 	writel(0x1, &armd1timers->cer);
-	/* init the gd->tbu and gd->tbl value */
-	gd->tbl = read_timer();
-	gd->tbu = 0;
+	/* init the gd->arch.tbu and gd->arch.tbl value */
+	gd->arch.tbl = read_timer();
+	gd->arch.tbu = 0;
 
 	return 0;
 }
diff --git a/arch/arm/cpu/arm926ejs/at91/clock.c b/arch/arm/cpu/arm926ejs/at91/clock.c
index dc5c6c4..f825388 100644
--- a/arch/arm/cpu/arm926ejs/at91/clock.c
+++ b/arch/arm/cpu/arm926ejs/at91/clock.c
@@ -29,11 +29,11 @@ static unsigned long at91_css_to_rate(unsigned long css)
 	case AT91_PMC_MCKR_CSS_SLOW:
 		return CONFIG_SYS_AT91_SLOW_CLOCK;
 	case AT91_PMC_MCKR_CSS_MAIN:
-		return gd->main_clk_rate_hz;
+		return gd->arch.main_clk_rate_hz;
 	case AT91_PMC_MCKR_CSS_PLLA:
-		return gd->plla_rate_hz;
+		return gd->arch.plla_rate_hz;
 	case AT91_PMC_MCKR_CSS_PLLB:
-		return gd->pllb_rate_hz;
+		return gd->arch.pllb_rate_hz;
 	}
 
 	return 0;
@@ -132,10 +132,10 @@ int at91_clock_init(unsigned long main_clock)
 		main_clock = tmp * (CONFIG_SYS_AT91_SLOW_CLOCK / 16);
 	}
 #endif
-	gd->main_clk_rate_hz = main_clock;
+	gd->arch.main_clk_rate_hz = main_clock;
 
 	/* report if PLLA is more than mildly overclocked */
-	gd->plla_rate_hz = at91_pll_rate(main_clock, readl(&pmc->pllar));
+	gd->arch.plla_rate_hz = at91_pll_rate(main_clock, readl(&pmc->pllar));
 
 #ifdef CONFIG_USB_ATMEL
 	/*
@@ -144,9 +144,10 @@ int at91_clock_init(unsigned long main_clock)
 	 *
 	 * REVISIT:  assumes MCK doesn't derive from PLLB!
 	 */
-	gd->at91_pllb_usb_init = at91_pll_calc(main_clock, 48000000 * 2) |
+	gd->arch.at91_pllb_usb_init = at91_pll_calc(main_clock, 48000000 * 2) |
 			     AT91_PMC_PLLBR_USBDIV_2;
-	gd->pllb_rate_hz = at91_pll_rate(main_clock, gd->at91_pllb_usb_init);
+	gd->arch.pllb_rate_hz = at91_pll_rate(main_clock,
+					      gd->arch.at91_pllb_usb_init);
 #endif
 
 	/*
@@ -157,15 +158,15 @@ int at91_clock_init(unsigned long main_clock)
 #if defined(CONFIG_AT91SAM9G45) || defined(CONFIG_AT91SAM9M10G45) \
 		|| defined(CONFIG_AT91SAM9X5)
 	/* plla divisor by 2 */
-	gd->plla_rate_hz /= (1 << ((mckr & 1 << 12) >> 12));
+	gd->arch.plla_rate_hz /= (1 << ((mckr & 1 << 12) >> 12));
 #endif
-	gd->mck_rate_hz = at91_css_to_rate(mckr & AT91_PMC_MCKR_CSS_MASK);
-	freq = gd->mck_rate_hz;
+	gd->arch.mck_rate_hz = at91_css_to_rate(mckr & AT91_PMC_MCKR_CSS_MASK);
+	freq = gd->arch.mck_rate_hz;
 
 	freq /= (1 << ((mckr & AT91_PMC_MCKR_PRES_MASK) >> 2));	/* prescale */
 #if defined(CONFIG_AT91SAM9G20)
 	/* mdiv ; (x >> 7) = ((x >> 8) * 2) */
-	gd->mck_rate_hz = (mckr & AT91_PMC_MCKR_MDIV_MASK) ?
+	gd->arch.mck_rate_hz = (mckr & AT91_PMC_MCKR_MDIV_MASK) ?
 		freq / ((mckr & AT91_PMC_MCKR_MDIV_MASK) >> 7) : freq;
 	if (mckr & AT91_PMC_MCKR_MDIV_MASK)
 		freq /= 2;			/* processor clock division */
@@ -177,14 +178,15 @@ int at91_clock_init(unsigned long main_clock)
 	 *  2   <==>   4
 	 *  3   <==>   3
 	 */
-	gd->mck_rate_hz = (mckr & AT91_PMC_MCKR_MDIV_MASK) ==
+	gd->arch.mck_rate_hz = (mckr & AT91_PMC_MCKR_MDIV_MASK) ==
 		(AT91_PMC_MCKR_MDIV_2 | AT91_PMC_MCKR_MDIV_4)
 		? freq / 3
 		: freq / (1 << ((mckr & AT91_PMC_MCKR_MDIV_MASK) >> 8));
 #else
-	gd->mck_rate_hz = freq / (1 << ((mckr & AT91_PMC_MCKR_MDIV_MASK) >> 8));
+	gd->arch.mck_rate_hz = freq /
+			(1 << ((mckr & AT91_PMC_MCKR_MDIV_MASK) >> 8));
 #endif
-	gd->cpu_clk_rate_hz = freq;
+	gd->arch.cpu_clk_rate_hz = freq;
 
 	return 0;
 }
diff --git a/arch/arm/cpu/arm926ejs/at91/timer.c b/arch/arm/cpu/arm926ejs/at91/timer.c
index f70ce83..4443fef 100644
--- a/arch/arm/cpu/arm926ejs/at91/timer.c
+++ b/arch/arm/cpu/arm926ejs/at91/timer.c
@@ -52,14 +52,14 @@ DECLARE_GLOBAL_DATA_PTR;
 static inline unsigned long long tick_to_time(unsigned long long tick)
 {
 	tick *= CONFIG_SYS_HZ;
-	do_div(tick, gd->timer_rate_hz);
+	do_div(tick, gd->arch.timer_rate_hz);
 
 	return tick;
 }
 
 static inline unsigned long long usec_to_tick(unsigned long long usec)
 {
-	usec *= gd->timer_rate_hz;
+	usec *= gd->arch.timer_rate_hz;
 	do_div(usec, 1000000);
 
 	return usec;
@@ -79,8 +79,8 @@ int timer_init(void)
 	/* Enable PITC */
 	writel(TIMER_LOAD_VAL | AT91_PIT_MR_EN , &pit->mr);
 
-	gd->timer_rate_hz = gd->mck_rate_hz / 16;
-	gd->tbu = gd->tbl = 0;
+	gd->arch.timer_rate_hz = gd->arch.mck_rate_hz / 16;
+	gd->arch.tbu = gd->arch.tbl = 0;
 
 	return 0;
 }
@@ -95,10 +95,10 @@ unsigned long long get_ticks(void)
 	ulong now = readl(&pit->piir);
 
 	/* increment tbu if tbl has rolled over */
-	if (now < gd->tbl)
-		gd->tbu++;
-	gd->tbl = now;
-	return (((unsigned long long)gd->tbu) << 32) | gd->tbl;
+	if (now < gd->arch.tbl)
+		gd->arch.tbu++;
+	gd->arch.tbl = now;
+	return (((unsigned long long)gd->arch.tbu) << 32) | gd->arch.tbl;
 }
 
 void __udelay(unsigned long usec)
@@ -132,5 +132,5 @@ ulong get_timer(ulong base)
  */
 ulong get_tbclk(void)
 {
-	return gd->timer_rate_hz;
+	return gd->arch.timer_rate_hz;
 }
diff --git a/arch/arm/cpu/arm926ejs/davinci/timer.c b/arch/arm/cpu/arm926ejs/davinci/timer.c
index 93c9e60..4142932 100644
--- a/arch/arm/cpu/arm926ejs/davinci/timer.c
+++ b/arch/arm/cpu/arm926ejs/davinci/timer.c
@@ -60,8 +60,8 @@ int timer_init(void)
 	writel(0x0, &timer->tim34);
 	writel(TIMER_LOAD_VAL, &timer->prd34);
 	writel(2 << 22, &timer->tcr);
-	gd->timer_rate_hz = CONFIG_SYS_HZ_CLOCK / TIM_CLK_DIV;
-	gd->timer_reset_value = 0;
+	gd->arch.timer_rate_hz = CONFIG_SYS_HZ_CLOCK / TIM_CLK_DIV;
+	gd->arch.timer_reset_value = 0;
 
 	return(0);
 }
@@ -74,27 +74,28 @@ unsigned long long get_ticks(void)
 	unsigned long now = readl(&timer->tim34);
 
 	/* increment tbu if tbl has rolled over */
-	if (now < gd->tbl)
-		gd->tbu++;
-	gd->tbl = now;
+	if (now < gd->arch.tbl)
+		gd->arch.tbu++;
+	gd->arch.tbl = now;
 
-	return (((unsigned long long)gd->tbu) << 32) | gd->tbl;
+	return (((unsigned long long)gd->arch.tbu) << 32) | gd->arch.tbl;
 }
 
 ulong get_timer(ulong base)
 {
 	unsigned long long timer_diff;
 
-	timer_diff = get_ticks() - gd->timer_reset_value;
+	timer_diff = get_ticks() - gd->arch.timer_reset_value;
 
-	return lldiv(timer_diff, (gd->timer_rate_hz / CONFIG_SYS_HZ)) - base;
+	return lldiv(timer_diff,
+		     (gd->arch.timer_rate_hz / CONFIG_SYS_HZ)) - base;
 }
 
 void __udelay(unsigned long usec)
 {
 	unsigned long long endtime;
 
-	endtime = lldiv((unsigned long long)usec * gd->timer_rate_hz,
+	endtime = lldiv((unsigned long long)usec * gd->arch.timer_rate_hz,
 			1000000UL);
 	endtime += get_ticks();
 
@@ -108,7 +109,7 @@ void __udelay(unsigned long usec)
  */
 ulong get_tbclk(void)
 {
-	return gd->timer_rate_hz;
+	return gd->arch.timer_rate_hz;
 }
 
 #ifdef CONFIG_HW_WATCHDOG
diff --git a/arch/arm/cpu/arm926ejs/kirkwood/timer.c b/arch/arm/cpu/arm926ejs/kirkwood/timer.c
index f5d0160..85e81e3 100644
--- a/arch/arm/cpu/arm926ejs/kirkwood/timer.c
+++ b/arch/arm/cpu/arm926ejs/kirkwood/timer.c
@@ -86,8 +86,8 @@ struct kwtmr_registers *kwtmr_regs = (struct kwtmr_registers *)KW_TIMER_BASE;
 
 DECLARE_GLOBAL_DATA_PTR;
 
-#define timestamp gd->tbl
-#define lastdec gd->lastinc
+#define timestamp gd->arch.tbl
+#define lastdec gd->arch.lastinc
 
 ulong get_timer_masked(void)
 {
diff --git a/arch/arm/cpu/arm926ejs/mb86r0x/timer.c b/arch/arm/cpu/arm926ejs/mb86r0x/timer.c
index 75314b9..c6486c1 100644
--- a/arch/arm/cpu/arm926ejs/mb86r0x/timer.c
+++ b/arch/arm/cpu/arm926ejs/mb86r0x/timer.c
@@ -35,8 +35,8 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
-#define timestamp gd->tbl
-#define lastdec gd->lastinc
+#define timestamp gd->arch.tbl
+#define lastdec gd->arch.lastinc
 
 static inline unsigned long long tick_to_time(unsigned long long tick)
 {
diff --git a/arch/arm/cpu/arm926ejs/mx25/generic.c b/arch/arm/cpu/arm926ejs/mx25/generic.c
index b991418..679273b 100644
--- a/arch/arm/cpu/arm926ejs/mx25/generic.c
+++ b/arch/arm/cpu/arm926ejs/mx25/generic.c
@@ -229,9 +229,9 @@ int get_clocks(void)
 {
 #ifdef CONFIG_FSL_ESDHC
 #if CONFIG_SYS_FSL_ESDHC_ADDR == IMX_MMC_SDHC2_BASE
-	gd->sdhc_clk = mxc_get_clock(MXC_ESDHC2_CLK);
+	gd->arch.sdhc_clk = mxc_get_clock(MXC_ESDHC2_CLK);
 #else
-	gd->sdhc_clk = mxc_get_clock(MXC_ESDHC1_CLK);
+	gd->arch.sdhc_clk = mxc_get_clock(MXC_ESDHC1_CLK);
 #endif
 #endif
 	return 0;
diff --git a/arch/arm/cpu/arm926ejs/mx25/timer.c b/arch/arm/cpu/arm926ejs/mx25/timer.c
index 4dc4041..f8bebcc 100644
--- a/arch/arm/cpu/arm926ejs/mx25/timer.c
+++ b/arch/arm/cpu/arm926ejs/mx25/timer.c
@@ -44,8 +44,8 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
-#define timestamp	(gd->tbl)
-#define lastinc		(gd->lastinc)
+#define timestamp	(gd->arch.tbl)
+#define lastinc		(gd->arch.lastinc)
 
 /*
  * "time" is measured in 1 / CONFIG_SYS_HZ seconds,
diff --git a/arch/arm/cpu/arm926ejs/mx27/timer.c b/arch/arm/cpu/arm926ejs/mx27/timer.c
index a5dd684..07e132a 100644
--- a/arch/arm/cpu/arm926ejs/mx27/timer.c
+++ b/arch/arm/cpu/arm926ejs/mx27/timer.c
@@ -45,8 +45,8 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
-#define timestamp	(gd->tbl)
-#define lastinc		(gd->lastinc)
+#define timestamp	(gd->arch.tbl)
+#define lastinc		(gd->arch.lastinc)
 
 /*
  * "time" is measured in 1 / CONFIG_SYS_HZ seconds,
diff --git a/arch/arm/cpu/arm926ejs/mxs/timer.c b/arch/arm/cpu/arm926ejs/mxs/timer.c
index 4ed75e6..3738411 100644
--- a/arch/arm/cpu/arm926ejs/mxs/timer.c
+++ b/arch/arm/cpu/arm926ejs/mxs/timer.c
@@ -36,8 +36,8 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
-#define timestamp (gd->tbl)
-#define lastdec (gd->lastinc)
+#define timestamp (gd->arch.tbl)
+#define lastdec (gd->arch.lastinc)
 
 /*
  * This driver uses 1kHz clock source.
diff --git a/arch/arm/cpu/arm926ejs/omap/timer.c b/arch/arm/cpu/arm926ejs/omap/timer.c
index 390c9c8..34ec7b2 100644
--- a/arch/arm/cpu/arm926ejs/omap/timer.c
+++ b/arch/arm/cpu/arm926ejs/omap/timer.c
@@ -44,8 +44,8 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
-#define timestamp gd->tbl
-#define lastdec gd->lastinc
+#define timestamp gd->arch.tbl
+#define lastdec gd->arch.lastinc
 
 int timer_init (void)
 {
diff --git a/arch/arm/cpu/arm926ejs/orion5x/timer.c b/arch/arm/cpu/arm926ejs/orion5x/timer.c
index 8a8aaf1..f723351 100644
--- a/arch/arm/cpu/arm926ejs/orion5x/timer.c
+++ b/arch/arm/cpu/arm926ejs/orion5x/timer.c
@@ -92,8 +92,8 @@ static inline ulong read_timer(void)
 
 DECLARE_GLOBAL_DATA_PTR;
 
-#define timestamp gd->tbl
-#define lastdec gd->lastinc
+#define timestamp gd->arch.tbl
+#define lastdec gd->arch.lastinc
 
 ulong get_timer_masked(void)
 {
diff --git a/arch/arm/cpu/arm926ejs/pantheon/timer.c b/arch/arm/cpu/arm926ejs/pantheon/timer.c
index 28aadad..2d9ddba 100644
--- a/arch/arm/cpu/arm926ejs/pantheon/timer.c
+++ b/arch/arm/cpu/arm926ejs/pantheon/timer.c
@@ -60,7 +60,7 @@ struct panthtmr_registers {
 #define	COUNT_RD_REQ		0x1
 
 DECLARE_GLOBAL_DATA_PTR;
-/* Using gd->tbu from timestamp and gd->tbl for lastdec */
+/* Using gd->arch.tbu from timestamp and gd->arch.tbl for lastdec */
 
 /*
  * For preventing risk of instability in reading counter value,
@@ -90,16 +90,16 @@ ulong get_timer_masked(void)
 {
 	ulong now = read_timer();
 
-	if (now >= gd->tbl) {
+	if (now >= gd->arch.tbl) {
 		/* normal mode */
-		gd->tbu += now - gd->tbl;
+		gd->arch.tbu += now - gd->arch.tbl;
 	} else {
 		/* we have an overflow ... */
-		gd->tbu += now + TIMER_LOAD_VAL - gd->tbl;
+		gd->arch.tbu += now + TIMER_LOAD_VAL - gd->arch.tbl;
 	}
-	gd->tbl = now;
+	gd->arch.tbl = now;
 
-	return gd->tbu;
+	return gd->arch.tbu;
 }
 
 ulong get_timer(ulong base)
@@ -144,9 +144,9 @@ int timer_init(void)
 
 	/* Enable timer 0 */
 	writel(0x1, &panthtimers->cer);
-	/* init the gd->tbu and gd->tbl value */
-	gd->tbl = read_timer();
-	gd->tbu = 0;
+	/* init the gd->arch.tbu and gd->arch.tbl value */
+	gd->arch.tbl = read_timer();
+	gd->arch.tbu = 0;
 
 	return 0;
 }
diff --git a/arch/arm/cpu/arm926ejs/spear/timer.c b/arch/arm/cpu/arm926ejs/spear/timer.c
index 1dc7860..de4ba7b 100644
--- a/arch/arm/cpu/arm926ejs/spear/timer.c
+++ b/arch/arm/cpu/arm926ejs/spear/timer.c
@@ -38,8 +38,8 @@ static struct misc_regs *const misc_regs_p =
 
 DECLARE_GLOBAL_DATA_PTR;
 
-#define timestamp gd->tbl
-#define lastdec gd->lastinc
+#define timestamp gd->arch.tbl
+#define lastdec gd->arch.lastinc
 
 int timer_init(void)
 {
diff --git a/arch/arm/cpu/arm926ejs/versatile/timer.c b/arch/arm/cpu/arm926ejs/versatile/timer.c
index f58e151..b36d6d9 100644
--- a/arch/arm/cpu/arm926ejs/versatile/timer.c
+++ b/arch/arm/cpu/arm926ejs/versatile/timer.c
@@ -44,8 +44,8 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
-#define timestamp gd->tbl
-#define lastdec gd->lastinc
+#define timestamp gd->arch.tbl
+#define lastdec gd->arch.lastinc
 
 #define TIMER_ENABLE	(1 << 7)
 #define TIMER_MODE_MSK	(1 << 6)
diff --git a/arch/arm/cpu/armv7/omap-common/timer.c b/arch/arm/cpu/armv7/omap-common/timer.c
index 9f8bc93..36bea5f 100644
--- a/arch/arm/cpu/armv7/omap-common/timer.c
+++ b/arch/arm/cpu/armv7/omap-common/timer.c
@@ -56,8 +56,9 @@ int timer_init(void)
 		&timer_base->tclr);
 
 	/* reset time, capture current incrementer value time */
-	gd->lastinc = readl(&timer_base->tcrr) / (TIMER_CLOCK / CONFIG_SYS_HZ);
-	gd->tbl = 0;		/* start "advancing" time stamp from 0 */
+	gd->arch.lastinc = readl(&timer_base->tcrr) /
+					(TIMER_CLOCK / CONFIG_SYS_HZ);
+	gd->arch.tbl = 0;	/* start "advancing" time stamp from 0 */
 
 	return 0;
 }
@@ -91,14 +92,15 @@ ulong get_timer_masked(void)
 	/* current tick value */
 	ulong now = readl(&timer_base->tcrr) / (TIMER_CLOCK / CONFIG_SYS_HZ);
 
-	if (now >= gd->lastinc)	/* normal mode (non roll) */
+	if (now >= gd->arch.lastinc) {	/* normal mode (non roll) */
 		/* move stamp fordward with absoulte diff ticks */
-		gd->tbl += (now - gd->lastinc);
-	else	/* we have rollover of incrementer */
-		gd->tbl += ((TIMER_LOAD_VAL / (TIMER_CLOCK / CONFIG_SYS_HZ))
-			     - gd->lastinc) + now;
-	gd->lastinc = now;
-	return gd->tbl;
+		gd->arch.tbl += (now - gd->arch.lastinc);
+	} else {	/* we have rollover of incrementer */
+		gd->arch.tbl += ((TIMER_LOAD_VAL / (TIMER_CLOCK /
+				CONFIG_SYS_HZ)) - gd->arch.lastinc) + now;
+	}
+	gd->arch.lastinc = now;
+	return gd->arch.tbl;
 }
 
 /*
diff --git a/arch/arm/cpu/armv7/s5p-common/timer.c b/arch/arm/cpu/armv7/s5p-common/timer.c
index bb0e795..e78c716 100644
--- a/arch/arm/cpu/armv7/s5p-common/timer.c
+++ b/arch/arm/cpu/armv7/s5p-common/timer.c
@@ -105,8 +105,8 @@ void reset_timer_masked(void)
 	struct s5p_timer *const timer = s5p_get_base_timer();
 
 	/* reset time */
-	gd->lastinc = readl(&timer->tcnto4);
-	gd->tbl = 0;
+	gd->arch.lastinc = readl(&timer->tcnto4);
+	gd->arch.tbl = 0;
 }
 
 unsigned long get_timer_masked(void)
@@ -123,14 +123,14 @@ unsigned long get_current_tick(void)
 	unsigned long now = readl(&timer->tcnto4);
 	unsigned long count_value = readl(&timer->tcntb4);
 
-	if (gd->lastinc >= now)
-		gd->tbl += gd->lastinc - now;
+	if (gd->arch.lastinc >= now)
+		gd->arch.tbl += gd->arch.lastinc - now;
 	else
-		gd->tbl += gd->lastinc + count_value - now;
+		gd->arch.tbl += gd->arch.lastinc + count_value - now;
 
-	gd->lastinc = now;
+	gd->arch.lastinc = now;
 
-	return gd->tbl;
+	return gd->arch.tbl;
 }
 
 /*
diff --git a/arch/arm/cpu/armv7/socfpga/timer.c b/arch/arm/cpu/armv7/socfpga/timer.c
index 321e9b4..efa28c2 100644
--- a/arch/arm/cpu/armv7/socfpga/timer.c
+++ b/arch/arm/cpu/armv7/socfpga/timer.c
@@ -80,16 +80,16 @@ ulong get_timer_masked(void)
 {
 	/* current tick value */
 	ulong now = read_timer() / (CONFIG_TIMER_CLOCK_KHZ/CONFIG_SYS_HZ);
-	if (gd->lastinc >= now) {
+	if (gd->arch.lastinc >= now) {
 		/* normal mode (non roll) */
 		/* move stamp forward with absolute diff ticks */
-		gd->tbl += gd->lastinc - now;
+		gd->arch.tbl += gd->arch.lastinc - now;
 	} else {
 		/* we have overflow of the count down timer */
-		gd->tbl += TIMER_LOAD_VAL - gd->lastinc + now;
+		gd->arch.tbl += TIMER_LOAD_VAL - gd->arch.lastinc + now;
 	}
-	gd->lastinc = now;
-	return gd->tbl;
+	gd->arch.lastinc = now;
+	return gd->arch.tbl;
 }
 
 /*
@@ -98,7 +98,8 @@ ulong get_timer_masked(void)
 void reset_timer(void)
 {
 	/* capture current decrementer value time */
-	gd->lastinc = read_timer() / (CONFIG_TIMER_CLOCK_KHZ/CONFIG_SYS_HZ);
+	gd->arch.lastinc = read_timer() /
+				(CONFIG_TIMER_CLOCK_KHZ / CONFIG_SYS_HZ);
 	/* start "advancing" time stamp from 0 */
-	gd->tbl = 0;
+	gd->arch.tbl = 0;
 }
diff --git a/arch/arm/cpu/armv7/u8500/timer.c b/arch/arm/cpu/armv7/u8500/timer.c
index 79aad99..a4b88f3 100644
--- a/arch/arm/cpu/armv7/u8500/timer.c
+++ b/arch/arm/cpu/armv7/u8500/timer.c
@@ -100,12 +100,14 @@ ulong get_timer_masked(void)
 	/* current tick value */
 	ulong now = TICKS_TO_HZ(READ_TIMER());
 
-	if (now >= gd->lastinc)	/* normal (non rollover) */
-		gd->tbl += (now - gd->lastinc);
-	else			/* rollover */
-		gd->tbl += (TICKS_TO_HZ(TIMER_LOAD_VAL) - gd->lastinc) + now;
-	gd->lastinc = now;
-	return gd->tbl;
+	if (now >= gd->arch.lastinc) {	/* normal (non rollover) */
+		gd->arch.tbl += (now - gd->arch.lastinc);
+	} else {			/* rollover */
+		gd->arch.tbl += (TICKS_TO_HZ(TIMER_LOAD_VAL) -
+					gd->arch.lastinc) + now;
+	}
+	gd->arch.lastinc = now;
+	return gd->arch.tbl;
 }
 
 /* Delay x useconds */
@@ -132,7 +134,7 @@ ulong get_timer(ulong base)
 /*
  * Emulation of Power architecture long long timebase.
  *
- * TODO: Support gd->tbu for real long long timebase.
+ * TODO: Support gd->arch.tbu for real long long timebase.
  */
 unsigned long long get_ticks(void)
 {
diff --git a/arch/arm/cpu/armv7/zynq/timer.c b/arch/arm/cpu/armv7/zynq/timer.c
index 323e7b5..45b405a 100644
--- a/arch/arm/cpu/armv7/zynq/timer.c
+++ b/arch/arm/cpu/armv7/zynq/timer.c
@@ -83,9 +83,9 @@ int timer_init(void)
 								emask);
 
 	/* Reset time */
-	gd->lastinc = readl(&timer_base->counter) /
+	gd->arch.lastinc = readl(&timer_base->counter) /
 					(TIMER_TICK_HZ / CONFIG_SYS_HZ);
-	gd->tbl = 0;
+	gd->arch.tbl = 0;
 
 	return 0;
 }
@@ -100,16 +100,16 @@ ulong get_timer_masked(void)
 
 	now = readl(&timer_base->counter) / (TIMER_TICK_HZ / CONFIG_SYS_HZ);
 
-	if (gd->lastinc >= now) {
+	if (gd->arch.lastinc >= now) {
 		/* Normal mode */
-		gd->tbl += gd->lastinc - now;
+		gd->arch.tbl += gd->arch.lastinc - now;
 	} else {
 		/* We have an overflow ... */
-		gd->tbl += gd->lastinc + TIMER_LOAD_VAL - now;
+		gd->arch.tbl += gd->arch.lastinc + TIMER_LOAD_VAL - now;
 	}
-	gd->lastinc = now;
+	gd->arch.lastinc = now;
 
-	return gd->tbl;
+	return gd->arch.tbl;
 }
 
 void __udelay(unsigned long usec)
diff --git a/arch/arm/cpu/ixp/timer.c b/arch/arm/cpu/ixp/timer.c
index 087ddf8..663d989 100644
--- a/arch/arm/cpu/ixp/timer.c
+++ b/arch/arm/cpu/ixp/timer.c
@@ -70,23 +70,23 @@ unsigned long long get_ticks(void)
 
 	if (readl(IXP425_OSST) & IXP425_OSST_TIMER_TS_PEND) {
 		/* rollover of timestamp timer register */
-		gd->timestamp += (0xFFFFFFFF - gd->lastinc) + now + 1;
+		gd->arch.timestamp += (0xFFFFFFFF - gd->arch.lastinc) + now + 1;
 		writel(IXP425_OSST_TIMER_TS_PEND, IXP425_OSST);
 	} else {
 		/* move stamp forward with absolut diff ticks */
-		gd->timestamp += (now - gd->lastinc);
+		gd->arch.timestamp += (now - gd->arch.lastinc);
 	}
-	gd->lastinc = now;
-	return gd->timestamp;
+	gd->arch.lastinc = now;
+	return gd->arch.timestamp;
 }
 
 
 void reset_timer_masked(void)
 {
 	/* capture current timestamp counter */
-	gd->lastinc = readl(IXP425_OSTS_B);
+	gd->arch.lastinc = readl(IXP425_OSTS_B);
 	/* start "advancing" time stamp from 0 */
-	gd->timestamp = 0;
+	gd->arch.timestamp = 0;
 }
 
 ulong get_timer_masked(void)
diff --git a/arch/arm/cpu/pxa/timer.c b/arch/arm/cpu/pxa/timer.c
index a8f7462..212b31e 100644
--- a/arch/arm/cpu/pxa/timer.c
+++ b/arch/arm/cpu/pxa/timer.c
@@ -31,8 +31,8 @@ DECLARE_GLOBAL_DATA_PTR;
 
 #define	TIMER_LOAD_VAL	0xffffffff
 
-#define	timestamp	(gd->tbl)
-#define	lastinc		(gd->lastinc)
+#define	timestamp	(gd->arch.tbl)
+#define	lastinc		(gd->arch.lastinc)
 
 #if defined(CONFIG_CPU_PXA27X) || defined(CONFIG_CPU_MONAHANS)
 #define	TIMER_FREQ_HZ	3250000
diff --git a/arch/arm/cpu/tegra-common/timer.c b/arch/arm/cpu/tegra-common/timer.c
index 034ea5a..51902e9 100644
--- a/arch/arm/cpu/tegra-common/timer.c
+++ b/arch/arm/cpu/tegra-common/timer.c
@@ -75,14 +75,14 @@ ulong get_timer_masked(void)
 	/* current tick value */
 	now = timer_get_us() / (TIMER_CLK / CONFIG_SYS_HZ);
 
-	if (now >= gd->lastinc)	/* normal mode (non roll) */
+	if (now >= gd->arch.lastinc)	/* normal mode (non roll) */
 		/* move stamp forward with absolute diff ticks */
-		gd->tbl += (now - gd->lastinc);
+		gd->arch.tbl += (now - gd->arch.lastinc);
 	else	/* we have rollover of incrementer */
-		gd->tbl += ((TIMER_LOAD_VAL / (TIMER_CLK / CONFIG_SYS_HZ))
-				- gd->lastinc) + now;
-	gd->lastinc = now;
-	return gd->tbl;
+		gd->arch.tbl += ((TIMER_LOAD_VAL / (TIMER_CLK / CONFIG_SYS_HZ))
+				- gd->arch.lastinc) + now;
+	gd->arch.lastinc = now;
+	return gd->arch.tbl;
 }
 
 /*
diff --git a/arch/arm/imx-common/speed.c b/arch/arm/imx-common/speed.c
index fbf4de3..638ee1a 100644
--- a/arch/arm/imx-common/speed.c
+++ b/arch/arm/imx-common/speed.c
@@ -37,23 +37,23 @@ int get_clocks(void)
 #ifdef CONFIG_FSL_ESDHC
 #ifdef CONFIG_FSL_USDHC
 #if CONFIG_SYS_FSL_ESDHC_ADDR == USDHC2_BASE_ADDR
-	gd->sdhc_clk = mxc_get_clock(MXC_ESDHC2_CLK);
+	gd->arch.sdhc_clk = mxc_get_clock(MXC_ESDHC2_CLK);
 #elif CONFIG_SYS_FSL_ESDHC_ADDR == USDHC3_BASE_ADDR
-	gd->sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK);
+	gd->arch.sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK);
 #elif CONFIG_SYS_FSL_ESDHC_ADDR == USDHC4_BASE_ADDR
-	gd->sdhc_clk = mxc_get_clock(MXC_ESDHC4_CLK);
+	gd->arch.sdhc_clk = mxc_get_clock(MXC_ESDHC4_CLK);
 #else
-	gd->sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK);
+	gd->arch.sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK);
 #endif
 #else
 #if CONFIG_SYS_FSL_ESDHC_ADDR == MMC_SDHC2_BASE_ADDR
-	gd->sdhc_clk = mxc_get_clock(MXC_ESDHC2_CLK);
+	gd->arch.sdhc_clk = mxc_get_clock(MXC_ESDHC2_CLK);
 #elif CONFIG_SYS_FSL_ESDHC_ADDR == MMC_SDHC3_BASE_ADDR
-	gd->sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK);
+	gd->arch.sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK);
 #elif CONFIG_SYS_FSL_ESDHC_ADDR == MMC_SDHC4_BASE_ADDR
-	gd->sdhc_clk = mxc_get_clock(MXC_ESDHC4_CLK);
+	gd->arch.sdhc_clk = mxc_get_clock(MXC_ESDHC4_CLK);
 #else
-	gd->sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK);
+	gd->arch.sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK);
 #endif
 #endif
 #endif
diff --git a/arch/arm/imx-common/timer.c b/arch/arm/imx-common/timer.c
index b021903..ab37d64 100644
--- a/arch/arm/imx-common/timer.c
+++ b/arch/arm/imx-common/timer.c
@@ -48,8 +48,8 @@ static struct mxc_gpt *cur_gpt = (struct mxc_gpt *)GPT1_BASE_ADDR;
 
 DECLARE_GLOBAL_DATA_PTR;
 
-#define timestamp (gd->tbl)
-#define lastinc (gd->lastinc)
+#define timestamp (gd->arch.tbl)
+#define lastinc (gd->arch.lastinc)
 
 static inline unsigned long long tick_to_time(unsigned long long tick)
 {
diff --git a/arch/arm/include/asm/arch-at91/clk.h b/arch/arm/include/asm/arch-at91/clk.h
index 1e8522b..d4852a3 100644
--- a/arch/arm/include/asm/arch-at91/clk.h
+++ b/arch/arm/include/asm/arch-at91/clk.h
@@ -31,37 +31,37 @@
 static inline unsigned long get_cpu_clk_rate(void)
 {
 	DECLARE_GLOBAL_DATA_PTR;
-	return gd->cpu_clk_rate_hz;
+	return gd->arch.cpu_clk_rate_hz;
 }
 
 static inline unsigned long get_main_clk_rate(void)
 {
 	DECLARE_GLOBAL_DATA_PTR;
-	return gd->main_clk_rate_hz;
+	return gd->arch.main_clk_rate_hz;
 }
 
 static inline unsigned long get_mck_clk_rate(void)
 {
 	DECLARE_GLOBAL_DATA_PTR;
-	return gd->mck_rate_hz;
+	return gd->arch.mck_rate_hz;
 }
 
 static inline unsigned long get_plla_clk_rate(void)
 {
 	DECLARE_GLOBAL_DATA_PTR;
-	return gd->plla_rate_hz;
+	return gd->arch.plla_rate_hz;
 }
 
 static inline unsigned long get_pllb_clk_rate(void)
 {
 	DECLARE_GLOBAL_DATA_PTR;
-	return gd->pllb_rate_hz;
+	return gd->arch.pllb_rate_hz;
 }
 
 static inline u32 get_pllb_init(void)
 {
 	DECLARE_GLOBAL_DATA_PTR;
-	return gd->at91_pllb_usb_init;
+	return gd->arch.at91_pllb_usb_init;
 }
 
 static inline unsigned long get_macb_pclk_rate(unsigned int dev_id)
diff --git a/arch/arm/include/asm/global_data.h b/arch/arm/include/asm/global_data.h
index 41a26ed..37ac0da 100644
--- a/arch/arm/include/asm/global_data.h
+++ b/arch/arm/include/asm/global_data.h
@@ -23,27 +23,11 @@
 
 #ifndef	__ASM_GBL_DATA_H
 #define __ASM_GBL_DATA_H
-/*
- * The following data structure is placed in some memory which is
- * available very early after boot (like DPRAM on MPC8xx/MPC82xx, or
- * some locked parts of the data cache) to allow for a minimum set of
- * global variables during system initialization (until we have set
- * up the memory controller so that we can use RAM).
- */
 
-typedef	struct	global_data {
-	bd_t		*bd;
-	unsigned long	flags;
-	unsigned int	baudrate;
-	unsigned long	have_console;	/* serial_init() was called */
-#ifdef CONFIG_PRE_CONSOLE_BUFFER
-	unsigned long	precon_buf_idx;	/* Pre-Console buffer index */
-#endif
-	unsigned long	env_addr;	/* Address  of Environment struct */
-	unsigned long	env_valid;	/* Checksum of Environment valid? */
-	unsigned long	fb_base;	/* base address of frame buffer */
-#ifdef CONFIG_FSL_ESDHC
-	unsigned long	sdhc_clk;
+/* Architecture-specific global data */
+struct arch_global_data {
+#if defined(CONFIG_FSL_ESDHC)
+	u32 sdhc_clk;
 #endif
 #ifdef CONFIG_AT91FAMILY
 	/* "static data" needed by at91's clock.c */
@@ -54,38 +38,22 @@ typedef	struct	global_data {
 	unsigned long	pllb_rate_hz;
 	unsigned long	at91_pllb_usb_init;
 #endif
-#ifdef CONFIG_ARM
 	/* "static data" needed by most of timer.c on ARM platforms */
-	unsigned long	timer_rate_hz;
-	unsigned long	tbl;
-	unsigned long	tbu;
-	unsigned long long	timer_reset_value;
-	unsigned long	lastinc;
-#endif
+	unsigned long timer_rate_hz;
+	unsigned long tbu;
+	unsigned long tbl;
+	unsigned long lastinc;
+	unsigned long long timer_reset_value;
 #ifdef CONFIG_IXP425
-	unsigned long	timestamp;
+	unsigned long timestamp;
 #endif
-	unsigned long	relocaddr;	/* Start address of U-Boot in RAM */
-	phys_size_t	ram_size;	/* RAM size */
-	unsigned long	mon_len;	/* monitor len */
-	unsigned long	irq_sp;		/* irq stack pointer */
-	unsigned long	start_addr_sp;	/* start_addr_stackpointer */
-	unsigned long	reloc_off;
 #if !(defined(CONFIG_SYS_ICACHE_OFF) && defined(CONFIG_SYS_DCACHE_OFF))
-	unsigned long	tlb_addr;
-	unsigned long	tlb_size;
-#endif
-	const void	*fdt_blob;	/* Our device tree, NULL if none */
-	void		**jt;		/* jump table */
-	char		env_buf[32];	/* buffer for getenv() before reloc. */
-#if defined(CONFIG_POST) || defined(CONFIG_LOGBUFFER)
-	unsigned long	post_log_word; /* Record POST activities */
-	unsigned long	post_log_res; /* success of POST test */
-	unsigned long	post_init_f_time; /* When post_init_f started */
+	unsigned long tlb_addr;
+	unsigned long tlb_size;
 #endif
-} gd_t;
+};
 
-#include <asm-generic/global_data_flags.h>
+#include <asm-generic/global_data.h>
 
 #define DECLARE_GLOBAL_DATA_PTR     register volatile gd_t *gd asm ("r8")
 
diff --git a/arch/arm/lib/board.c b/arch/arm/lib/board.c
index cfe32cc..162e2cc 100644
--- a/arch/arm/lib/board.c
+++ b/arch/arm/lib/board.c
@@ -355,14 +355,14 @@ void board_init_f(ulong bootflag)
 
 #if !(defined(CONFIG_SYS_ICACHE_OFF) && defined(CONFIG_SYS_DCACHE_OFF))
 	/* reserve TLB table */
-	gd->tlb_size = 4096 * 4;
-	addr -= gd->tlb_size;
+	gd->arch.tlb_size = 4096 * 4;
+	addr -= gd->arch.tlb_size;
 
 	/* round down to next 64 kB limit */
 	addr &= ~(0x10000 - 1);
 
-	gd->tlb_addr = addr;
-	debug("TLB table from %08lx to %08lx\n", addr, addr + gd->tlb_size);
+	gd->arch.tlb_addr = addr;
+	debug("TLB table from %08lx to %08lx\n", addr, addr + gd->arch.tlb_size);
 #endif
 
 	/* round down to next 4 kB limit */
@@ -488,7 +488,7 @@ static char *failed = "*** failed ***\n";
 static int should_load_env(void)
 {
 #ifdef CONFIG_OF_CONTROL
-	return fdtdec_get_config_int(gd->fdt_blob, "load-environment", 0);
+	return fdtdec_get_config_int(gd->fdt_blob, "load-environment", 1);
 #elif defined CONFIG_DELAY_ENVIRONMENT
 	return 0;
 #else
diff --git a/arch/arm/lib/cache-cp15.c b/arch/arm/lib/cache-cp15.c
index 1cab27c..b6e5e95 100644
--- a/arch/arm/lib/cache-cp15.c
+++ b/arch/arm/lib/cache-cp15.c
@@ -46,7 +46,7 @@ static void cp_delay (void)
 
 void set_section_dcache(int section, enum dcache_option option)
 {
-	u32 *page_table = (u32 *)gd->tlb_addr;
+	u32 *page_table = (u32 *)gd->arch.tlb_addr;
 	u32 value;
 
 	value = (section << MMU_SECTION_SHIFT) | (3 << 10);
@@ -65,7 +65,7 @@ void mmu_page_table_flush(unsigned long start, unsigned long stop)
 void mmu_set_region_dcache_behaviour(u32 start, int size,
 				     enum dcache_option option)
 {
-	u32 *page_table = (u32 *)gd->tlb_addr;
+	u32 *page_table = (u32 *)gd->arch.tlb_addr;
 	u32 upto, end;
 
 	end = ALIGN(start + size, MMU_SECTION_SIZE) >> MMU_SECTION_SHIFT;
@@ -111,7 +111,7 @@ static inline void mmu_setup(void)
 
 	/* Copy the page table address to cp15 */
 	asm volatile("mcr p15, 0, %0, c2, c0, 0"
-		     : : "r" (gd->tlb_addr) : "memory");
+		     : : "r" (gd->arch.tlb_addr) : "memory");
 	/* Set the access control to all-supervisor */
 	asm volatile("mcr p15, 0, %0, c3, c0, 0"
 		     : : "r" (~0));
diff --git a/arch/avr32/cpu/cpu.c b/arch/avr32/cpu/cpu.c
index 7907837..9d82ca4 100644
--- a/arch/avr32/cpu/cpu.c
+++ b/arch/avr32/cpu/cpu.c
@@ -47,7 +47,7 @@ int cpu_init(void)
 {
 	extern void _evba(void);
 
-	gd->cpu_hz = CONFIG_SYS_OSC0_HZ;
+	gd->arch.cpu_hz = CONFIG_SYS_OSC0_HZ;
 
 	/* TODO: Move somewhere else, but needs to be run before we
 	 * increase the clock frequency. */
@@ -59,7 +59,7 @@ int cpu_init(void)
 	clk_init();
 
 	/* Update the CPU speed according to the PLL configuration */
-	gd->cpu_hz = get_cpu_clk_rate();
+	gd->arch.cpu_hz = get_cpu_clk_rate();
 
 	/* Set up the exception handler table and enable exceptions */
 	sysreg_write(EVBA, (unsigned long)&_evba);
diff --git a/arch/avr32/cpu/exception.c b/arch/avr32/cpu/exception.c
index b21ef1f..828fc00 100644
--- a/arch/avr32/cpu/exception.c
+++ b/arch/avr32/cpu/exception.c
@@ -112,11 +112,11 @@ void do_unknown_exception(unsigned int ecr, struct pt_regs *regs)
 	printf("CPU Mode: %s\n", cpu_modes[mode]);
 
 	/* Avoid exception loops */
-	if (regs->sp < (gd->stack_end - CONFIG_STACKSIZE)
-			|| regs->sp >= gd->stack_end)
+	if (regs->sp < (gd->arch.stack_end - CONFIG_STACKSIZE)
+			|| regs->sp >= gd->arch.stack_end)
 		printf("\nStack pointer seems bogus, won't do stack dump\n");
 	else
-		dump_mem("\nStack: ", regs->sp, gd->stack_end);
+		dump_mem("\nStack: ", regs->sp, gd->arch.stack_end);
 
 	panic("Unhandled exception\n");
 }
diff --git a/arch/avr32/cpu/interrupts.c b/arch/avr32/cpu/interrupts.c
index 49a00f1..d87c6e1 100644
--- a/arch/avr32/cpu/interrupts.c
+++ b/arch/avr32/cpu/interrupts.c
@@ -46,7 +46,7 @@ static unsigned long tb_factor;
 
 unsigned long get_tbclk(void)
 {
-	return gd->cpu_hz;
+	return gd->arch.cpu_hz;
 }
 
 unsigned long long get_ticks(void)
@@ -115,8 +115,8 @@ int timer_init(void)
 	sysreg_write(COUNT, 0);
 
 	tmp = (u64)CONFIG_SYS_HZ << 32;
-	tmp += gd->cpu_hz / 2;
-	do_div(tmp, gd->cpu_hz);
+	tmp += gd->arch.cpu_hz / 2;
+	do_div(tmp, gd->arch.cpu_hz);
 	tb_factor = (u32)tmp;
 
 	if (set_interrupt_handler(0, &timer_interrupt_handler, 3))
diff --git a/arch/avr32/include/asm/global_data.h b/arch/avr32/include/asm/global_data.h
index bf661e2..a71f199 100644
--- a/arch/avr32/include/asm/global_data.h
+++ b/arch/avr32/include/asm/global_data.h
@@ -22,35 +22,13 @@
 #ifndef __ASM_GLOBAL_DATA_H__
 #define __ASM_GLOBAL_DATA_H__
 
-/*
- * The following data structure is placed in some memory wich is
- * available very early after boot (like DPRAM on MPC8xx/MPC82xx, or
- * some locked parts of the data cache) to allow for a minimum set of
- * global variables during system initialization (until we have set
- * up the memory controller so that we can use RAM).
- */
-
-typedef	struct	global_data {
-	bd_t		*bd;
-	unsigned long	flags;
-	unsigned int	baudrate;
-	unsigned long	stack_end;	/* highest stack address */
-	unsigned long	have_console;	/* serial_init() was called */
-#ifdef CONFIG_PRE_CONSOLE_BUFFER
-	unsigned long	precon_buf_idx;	/* Pre-Console buffer index */
-#endif
-	unsigned long	reloc_off;	/* Relocation Offset */
-	unsigned long	env_addr;	/* Address of env struct */
-	unsigned long	env_valid;	/* Checksum of env valid? */
-	unsigned long	cpu_hz;		/* cpu core clock frequency */
-#if defined(CONFIG_LCD)
-	void		*fb_base;	/* framebuffer address */
-#endif
-	void		**jt;		/* jump table */
-	char		env_buf[32];	/* buffer for getenv() before reloc. */
-} gd_t;
+/* Architecture-specific global data */
+struct arch_global_data {
+	unsigned long stack_end;	/* highest stack address */
+	unsigned long cpu_hz;		/* cpu core clock frequency */
+};
 
-#include <asm-generic/global_data_flags.h>
+#include <asm-generic/global_data.h>
 
 #define DECLARE_GLOBAL_DATA_PTR register gd_t *gd asm("r5")
 
diff --git a/arch/avr32/lib/board.c b/arch/avr32/lib/board.c
index e3287c4..d3c8cb7 100644
--- a/arch/avr32/lib/board.c
+++ b/arch/avr32/lib/board.c
@@ -231,7 +231,7 @@ void board_init_f(ulong board_type)
 
 	/* And finally, a new, bigger stack. */
 	new_sp = (unsigned long *)addr;
-	gd->stack_end = addr;
+	gd->arch.stack_end = addr;
 	*(--new_sp) = 0;
 	*(--new_sp) = 0;
 
diff --git a/arch/avr32/lib/bootm.c b/arch/avr32/lib/bootm.c
index 74ebeca..87f3f9c 100644
--- a/arch/avr32/lib/bootm.c
+++ b/arch/avr32/lib/bootm.c
@@ -109,7 +109,7 @@ static struct tag *setup_clock_tags(struct tag *params)
 	params->hdr.size = tag_size(tag_clock);
 	params->u.clock.clock_id = ACLOCK_BOOTCPU;
 	params->u.clock.clock_flags = 0;
-	params->u.clock.clock_hz = gd->cpu_hz;
+	params->u.clock.clock_hz = gd->arch.cpu_hz;
 
 #ifdef CONFIG_AT32AP7000
 	/*
diff --git a/arch/blackfin/include/asm/global_data.h b/arch/blackfin/include/asm/global_data.h
index d91e5a4..c2c4d4d 100644
--- a/arch/blackfin/include/asm/global_data.h
+++ b/arch/blackfin/include/asm/global_data.h
@@ -30,36 +30,11 @@
 
 #include <asm/u-boot.h>
 
-/*
- * The following data structure is placed in some memory wich is
- * available very early after boot (like DPRAM on MPC8xx/MPC82xx, or
- * some locked parts of the data cache) to allow for a minimum set of
- * global variables during system initialization (until we have set
- * up the memory controller so that we can use RAM).
- */
-typedef struct global_data {
-	bd_t *bd;
-	unsigned long flags;
-	unsigned long board_type;
-	unsigned int baudrate;
-	unsigned long have_console;	/* serial_init() was called */
-#ifdef CONFIG_PRE_CONSOLE_BUFFER
-	unsigned long	precon_buf_idx;	/* Pre-Console buffer index */
-#endif
-	phys_size_t ram_size;		/* RAM size */
-	unsigned long env_addr;	/* Address  of Environment struct */
-	unsigned long env_valid;	/* Checksum of Environment valid? */
-#if defined(CONFIG_POST) || defined(CONFIG_LOGBUFFER)
-	unsigned long post_log_word;	/* Record POST activities */
-	unsigned long post_log_res; 	/* success of POST test */
-	unsigned long post_init_f_time;	/* When post_init_f started */
-#endif
-
-	void	**jt;			/* jump table */
-	char	env_buf[32];		/* buffer for getenv() before reloc. */
-} gd_t;
+/* Architecture-specific global data */
+struct arch_global_data {
+};
 
-#include <asm-generic/global_data_flags.h>
+#include <asm-generic/global_data.h>
 
 #define DECLARE_GLOBAL_DATA_PTR     register volatile gd_t *gd asm ("P3")
 
diff --git a/arch/m68k/cpu/mcf5227x/cpu.c b/arch/m68k/cpu/mcf5227x/cpu.c
index 3a0ab97..705bd44 100644
--- a/arch/m68k/cpu/mcf5227x/cpu.c
+++ b/arch/m68k/cpu/mcf5227x/cpu.c
@@ -68,10 +68,10 @@ int checkcpu(void)
 		printf("       CPU CLK %s MHz BUS CLK %s MHz FLB CLK %s MHz\n",
 		       strmhz(buf1, gd->cpu_clk),
 		       strmhz(buf2, gd->bus_clk),
-		       strmhz(buf3, gd->flb_clk));
+		       strmhz(buf3, gd->arch.flb_clk));
 		printf("       INP CLK %s MHz VCO CLK %s MHz\n",
-		       strmhz(buf1, gd->inp_clk),
-		       strmhz(buf2, gd->vco_clk));
+		       strmhz(buf1, gd->arch.inp_clk),
+		       strmhz(buf2, gd->arch.vco_clk));
 	}
 
 	return 0;
diff --git a/arch/m68k/cpu/mcf5227x/speed.c b/arch/m68k/cpu/mcf5227x/speed.c
index b94a9ed..98f554a 100644
--- a/arch/m68k/cpu/mcf5227x/speed.c
+++ b/arch/m68k/cpu/mcf5227x/speed.c
@@ -114,28 +114,28 @@ int get_clocks(void)
 			    ((in_be32(&pll->pcr) & 0xFF000000) >> 24) *
 			    CONFIG_SYS_INPUT_CLKSRC;
 		}
-		gd->vco_clk = vco;	/* Vco clock */
+		gd->arch.vco_clk = vco;	/* Vco clock */
 	} else if (bootmode == 3) {
 		/* serial mode */
 		vco = ((in_be32(&pll->pcr) & 0xFF000000) >> 24) * CONFIG_SYS_INPUT_CLKSRC;
-		gd->vco_clk = vco;	/* Vco clock */
+		gd->arch.vco_clk = vco;	/* Vco clock */
 	}
 
 	if ((in_be16(&ccm->ccr) & CCM_MISCCR_LIMP) == CCM_MISCCR_LIMP) {
 		/* Limp mode */
 	} else {
-		gd->inp_clk = CONFIG_SYS_INPUT_CLKSRC;	/* Input clock */
+		gd->arch.inp_clk = CONFIG_SYS_INPUT_CLKSRC; /* Input clock */
 
 		temp = (in_be32(&pll->pcr) & PLL_PCR_OUTDIV1_MASK) + 1;
 		gd->cpu_clk = vco / temp;	/* cpu clock */
 
 		temp = ((in_be32(&pll->pcr) & PLL_PCR_OUTDIV2_MASK) >> 4) + 1;
-		gd->flb_clk = vco / temp;	/* flexbus clock */
-		gd->bus_clk = gd->flb_clk;
+		gd->arch.flb_clk = vco / temp;	/* flexbus clock */
+		gd->bus_clk = gd->arch.flb_clk;
 	}
 
 #ifdef CONFIG_FSL_I2C
-	gd->i2c1_clk = gd->bus_clk;
+	gd->arch.i2c1_clk = gd->bus_clk;
 #endif
 
 	return (0);
diff --git a/arch/m68k/cpu/mcf523x/speed.c b/arch/m68k/cpu/mcf523x/speed.c
index e2a6ae3..ae46257 100644
--- a/arch/m68k/cpu/mcf523x/speed.c
+++ b/arch/m68k/cpu/mcf523x/speed.c
@@ -48,7 +48,7 @@ int get_clocks(void)
 	gd->cpu_clk = (gd->bus_clk * 2);
 
 #ifdef CONFIG_FSL_I2C
-	gd->i2c1_clk = gd->bus_clk;
+	gd->arch.i2c1_clk = gd->bus_clk;
 #endif
 
 	return (0);
diff --git a/arch/m68k/cpu/mcf52x2/speed.c b/arch/m68k/cpu/mcf52x2/speed.c
index 70abed2..ba7dbaa 100644
--- a/arch/m68k/cpu/mcf52x2/speed.c
+++ b/arch/m68k/cpu/mcf52x2/speed.c
@@ -91,9 +91,9 @@ int get_clocks (void)
 #endif
 
 #ifdef CONFIG_FSL_I2C
-	gd->i2c1_clk = gd->bus_clk;
+	gd->arch.i2c1_clk = gd->bus_clk;
 #ifdef CONFIG_SYS_I2C2_OFFSET
-	gd->i2c2_clk = gd->bus_clk;
+	gd->arch.i2c2_clk = gd->bus_clk;
 #endif
 #endif
 
diff --git a/arch/m68k/cpu/mcf532x/speed.c b/arch/m68k/cpu/mcf532x/speed.c
index cfdcc8b..8efb451 100644
--- a/arch/m68k/cpu/mcf532x/speed.c
+++ b/arch/m68k/cpu/mcf532x/speed.c
@@ -271,7 +271,7 @@ int get_clocks(void)
 	gd->cpu_clk = (gd->bus_clk * 3);
 
 #ifdef CONFIG_FSL_I2C
-	gd->i2c1_clk = gd->bus_clk;
+	gd->arch.i2c1_clk = gd->bus_clk;
 #endif
 
 	return (0);
diff --git a/arch/m68k/cpu/mcf5445x/cpu.c b/arch/m68k/cpu/mcf5445x/cpu.c
index b612cda..08930f4 100644
--- a/arch/m68k/cpu/mcf5445x/cpu.c
+++ b/arch/m68k/cpu/mcf5445x/cpu.c
@@ -101,16 +101,16 @@ int checkcpu(void)
 		printf("       CPU CLK %s MHz BUS CLK %s MHz FLB CLK %s MHz\n",
 		       strmhz(buf1, gd->cpu_clk),
 		       strmhz(buf2, gd->bus_clk),
-		       strmhz(buf3, gd->flb_clk));
+		       strmhz(buf3, gd->arch.flb_clk));
 #ifdef CONFIG_PCI
 		printf("       PCI CLK %s MHz INP CLK %s MHz VCO CLK %s MHz\n",
 		       strmhz(buf1, gd->pci_clk),
-		       strmhz(buf2, gd->inp_clk),
-		       strmhz(buf3, gd->vco_clk));
+		       strmhz(buf2, gd->arch.inp_clk),
+		       strmhz(buf3, gd->arch.vco_clk));
 #else
 		printf("       INP CLK %s MHz VCO CLK %s MHz\n",
-		       strmhz(buf1, gd->inp_clk),
-		       strmhz(buf2, gd->vco_clk));
+		       strmhz(buf1, gd->arch.inp_clk),
+		       strmhz(buf2, gd->arch.vco_clk));
 #endif
 	}
 
diff --git a/arch/m68k/cpu/mcf5445x/speed.c b/arch/m68k/cpu/mcf5445x/speed.c
index 55d1c48..aa73e1f 100644
--- a/arch/m68k/cpu/mcf5445x/speed.c
+++ b/arch/m68k/cpu/mcf5445x/speed.c
@@ -233,7 +233,7 @@ void setup_5445x_clocks(void)
 
 			out_be32(&pll->pcr, pcrvalue);
 		}
-		gd->vco_clk = vco;	/* Vco clock */
+		gd->arch.vco_clk = vco;	/* Vco clock */
 	} else if (bootmode == 2) {
 		/* Normal mode */
 		vco =  ((in_be32(&pll->pcr) & 0xFF000000) >> 24) * CONFIG_SYS_INPUT_CLKSRC;
@@ -244,17 +244,17 @@ void setup_5445x_clocks(void)
 			out_be32(&pll->pcr, pcrvalue);
 			vco = ((in_be32(&pll->pcr) & 0xFF000000) >> 24) * CONFIG_SYS_INPUT_CLKSRC;
 		}
-		gd->vco_clk = vco;	/* Vco clock */
+		gd->arch.vco_clk = vco;	/* Vco clock */
 	} else if (bootmode == 3) {
 		/* serial mode */
 		vco =  ((in_be32(&pll->pcr) & 0xFF000000) >> 24) * CONFIG_SYS_INPUT_CLKSRC;
-		gd->vco_clk = vco;	/* Vco clock */
+		gd->arch.vco_clk = vco;	/* Vco clock */
 	}
 
 	if ((in_be16(&ccm->ccr) & CCM_MISCCR_LIMP) == CCM_MISCCR_LIMP) {
 		/* Limp mode */
 	} else {
-		gd->inp_clk = CONFIG_SYS_INPUT_CLKSRC;	/* Input clock */
+		gd->arch.inp_clk = CONFIG_SYS_INPUT_CLKSRC; /* Input clock */
 
 		temp = (in_be32(&pll->pcr) & PLL_PCR_OUTDIV1_MASK) + 1;
 		gd->cpu_clk = vco / temp;	/* cpu clock */
@@ -263,7 +263,7 @@ void setup_5445x_clocks(void)
 		gd->bus_clk = vco / temp;	/* bus clock */
 
 		temp = ((in_be32(&pll->pcr) & PLL_PCR_OUTDIV3_MASK) >> 8) + 1;
-		gd->flb_clk = vco / temp;	/* FlexBus clock */
+		gd->arch.flb_clk = vco / temp;	/* FlexBus clock */
 
 #ifdef CONFIG_PCI
 		if (bPci) {
@@ -274,7 +274,7 @@ void setup_5445x_clocks(void)
 	}
 
 #ifdef CONFIG_FSL_I2C
-	gd->i2c1_clk = gd->bus_clk;
+	gd->arch.i2c1_clk = gd->bus_clk;
 #endif
 }
 #endif
@@ -290,7 +290,7 @@ int get_clocks(void)
 #endif
 
 #ifdef CONFIG_FSL_I2C
-	gd->i2c1_clk = gd->bus_clk;
+	gd->arch.i2c1_clk = gd->bus_clk;
 #endif
 
 	return (0);
diff --git a/arch/m68k/cpu/mcf547x_8x/speed.c b/arch/m68k/cpu/mcf547x_8x/speed.c
index 31130b5..41aae9d 100644
--- a/arch/m68k/cpu/mcf547x_8x/speed.c
+++ b/arch/m68k/cpu/mcf547x_8x/speed.c
@@ -41,7 +41,7 @@ int get_clocks(void)
 	gd->cpu_clk = (gd->bus_clk * 2);
 
 #ifdef CONFIG_FSL_I2C
-	gd->i2c1_clk = gd->bus_clk;
+	gd->arch.i2c1_clk = gd->bus_clk;
 #endif
 
 	return (0);
diff --git a/arch/m68k/include/asm/global_data.h b/arch/m68k/include/asm/global_data.h
index 0cdb11c..3ec298f 100644
--- a/arch/m68k/include/asm/global_data.h
+++ b/arch/m68k/include/asm/global_data.h
@@ -23,52 +23,21 @@
 
 #ifndef	__ASM_GBL_DATA_H
 #define __ASM_GBL_DATA_H
-/*
- * The following data structure is placed in some memory wich is
- * available very early after boot (like DPRAM on MPC8xx/MPC82xx, or
- * some locked parts of the data cache) to allow for a minimum set of
- * global variables during system initialization (until we have set
- * up the memory controller so that we can use RAM).
- */
 
-typedef	struct	global_data {
-	bd_t		*bd;
-	unsigned long	flags;
-	unsigned int	baudrate;
-	unsigned long	cpu_clk;	/* CPU clock in Hz!		*/
-	unsigned long	bus_clk;
-#ifdef CONFIG_PCI
-	unsigned long	pci_clk;
-#endif
-#ifdef CONFIG_EXTRA_CLOCK
-	unsigned long	inp_clk;
-	unsigned long	vco_clk;
-	unsigned long	flb_clk;
-#endif
+/* Architecture-specific global data */
+struct arch_global_data {
 #ifdef CONFIG_FSL_I2C
 	unsigned long	i2c1_clk;
 	unsigned long	i2c2_clk;
 #endif
-	phys_size_t	ram_size;	/* RAM size */
-	unsigned long	reloc_off;	/* Relocation Offset */
-	unsigned long	reset_status;	/* reset status register at boot	*/
-	unsigned long	env_addr;	/* Address  of Environment struct	*/
-	unsigned long	env_valid;	/* Checksum of Environment valid?	*/
-	unsigned long	have_console;	/* serial_init() was called		*/
-#ifdef CONFIG_PRE_CONSOLE_BUFFER
-	unsigned long	precon_buf_idx;	/* Pre-Console buffer index */
-#endif
-#if defined(CONFIG_LCD) || defined(CONFIG_VIDEO)
-	unsigned long	fb_base;	/* Base addr of framebuffer memory */
-#endif
-#ifdef CONFIG_BOARD_TYPES
-	unsigned long	board_type;
+#ifdef CONFIG_EXTRA_CLOCK
+	unsigned long inp_clk;
+	unsigned long vco_clk;
+	unsigned long flb_clk;
 #endif
-	void		**jt;		/* Standalone app jump table */
-	char		env_buf[32];	/* buffer for getenv() before reloc. */
-} gd_t;
+};
 
-#include <asm-generic/global_data_flags.h>
+#include <asm-generic/global_data.h>
 
 #if 0
 extern gd_t *global_data;
diff --git a/arch/m68k/lib/board.c b/arch/m68k/lib/board.c
index e934cb6..c372ae2 100644
--- a/arch/m68k/lib/board.c
+++ b/arch/m68k/lib/board.c
@@ -349,9 +349,9 @@ board_init_f (ulong bootflag)
 	bd->bi_pcifreq = gd->pci_clk;		/* PCI Freq in Hz */
 #endif
 #ifdef CONFIG_EXTRA_CLOCK
-	bd->bi_inpfreq = gd->inp_clk;		/* input Freq in Hz */
-	bd->bi_vcofreq = gd->vco_clk;		/* vco Freq in Hz */
-	bd->bi_flbfreq = gd->flb_clk;		/* flexbus Freq in Hz */
+	bd->bi_inpfreq = gd->arch.inp_clk;		/* input Freq in Hz */
+	bd->bi_vcofreq = gd->arch.vco_clk;		/* vco Freq in Hz */
+	bd->bi_flbfreq = gd->arch.flb_clk;		/* flexbus Freq in Hz */
 #endif
 	bd->bi_baudrate = gd->baudrate;	/* Console Baudrate     */
 
diff --git a/arch/microblaze/include/asm/global_data.h b/arch/microblaze/include/asm/global_data.h
index 2111c7c..89dcef7 100644
--- a/arch/microblaze/include/asm/global_data.h
+++ b/arch/microblaze/include/asm/global_data.h
@@ -24,31 +24,12 @@
 
 #ifndef	__ASM_GBL_DATA_H
 #define __ASM_GBL_DATA_H
-/*
- * The following data structure is placed in some memory wich is
- * available very early after boot (like DPRAM on MPC8xx/MPC82xx, or
- * some locked parts of the data cache) to allow for a minimum set of
- * global variables during system initialization (until we have set
- * up the memory controller so that we can use RAM).
- */
 
-typedef	struct	global_data {
-	bd_t		*bd;
-	unsigned long	flags;
-	unsigned int	baudrate;
-	unsigned long	have_console;	/* serial_init() was called */
-#ifdef CONFIG_PRE_CONSOLE_BUFFER
-	unsigned long	precon_buf_idx;	/* Pre-Console buffer index */
-#endif
-	unsigned long	env_addr;	/* Address  of Environment struct */
-	const void	*fdt_blob;	/* Our device tree, NULL if none */
-	unsigned long	env_valid;	/* Checksum of Environment valid? */
-	unsigned long	fb_base;	/* base address of frame buffer */
-	void		**jt;		/* jump table */
-	char		env_buf[32];	/* buffer for getenv() before reloc. */
-} gd_t;
+/* Architecture-specific global data */
+struct arch_global_data {
+};
 
-#include <asm-generic/global_data_flags.h>
+#include <asm-generic/global_data.h>
 
 #define DECLARE_GLOBAL_DATA_PTR     register volatile gd_t *gd asm ("r31")
 
diff --git a/arch/microblaze/lib/Makefile b/arch/microblaze/lib/Makefile
index 7730695..8d7febd 100644
--- a/arch/microblaze/lib/Makefile
+++ b/arch/microblaze/lib/Makefile
@@ -29,6 +29,7 @@ SOBJS-y	+=
 
 COBJS-y	+= board.o
 COBJS-y	+= bootm.o
+COBJS-y	+= muldi3.o
 
 SRCS	:= $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c)
 OBJS	:= $(addprefix $(obj),$(SOBJS-y) $(COBJS-y))
diff --git a/arch/microblaze/lib/muldi3.c b/arch/microblaze/lib/muldi3.c
new file mode 100644
index 0000000..76d7590
--- /dev/null
+++ b/arch/microblaze/lib/muldi3.c
@@ -0,0 +1,91 @@
+/*
+ * U-boot - muldi3.c contains routines for mult and div
+ *
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+
+/* Generic function got from GNU gcc package, libgcc2.c */
+#ifndef SI_TYPE_SIZE
+#define SI_TYPE_SIZE 32
+#endif
+#define __ll_B (1L << (SI_TYPE_SIZE / 2))
+#define __ll_lowpart(t) ((USItype) (t) % __ll_B)
+#define __ll_highpart(t) ((USItype) (t) / __ll_B)
+#define BITS_PER_UNIT 8
+
+#if !defined(umul_ppmm)
+#define umul_ppmm(w1, w0, u, v)						\
+	do {								\
+	USItype __x0, __x1, __x2, __x3;					\
+	USItype __ul, __vl, __uh, __vh;					\
+									\
+		__ul = __ll_lowpart(u);					\
+		__uh = __ll_highpart(u);				\
+		__vl = __ll_lowpart(v);					\
+		__vh = __ll_highpart(v);				\
+									\
+	__x0 = (USItype) __ul * __vl;					\
+	__x1 = (USItype) __ul * __vh;					\
+	__x2 = (USItype) __uh * __vl;					\
+	__x3 = (USItype) __uh * __vh;					\
+									\
+		__x1 += __ll_highpart(__x0); /* this can't give carry */\
+		__x1 += __x2; /* but this indeed can */			\
+		if (__x1 < __x2) /* did we get it? */			\
+		__x3 += __ll_B;	/* yes, add it in the proper pos. */	\
+									\
+		(w1) = __x3 + __ll_highpart(__x1);			\
+		(w0) = __ll_lowpart(__x1) * __ll_B + __ll_lowpart(__x0);\
+	} while (0)
+#endif
+
+#if !defined(__umulsidi3)
+#define __umulsidi3(u, v)						\
+	({DIunion __w;							\
+	umul_ppmm(__w.s.high, __w.s.low, u, v);		\
+	__w.ll; })
+#endif
+
+typedef unsigned int USItype __attribute__ ((mode(SI)));
+typedef int SItype __attribute__ ((mode(SI)));
+typedef int DItype __attribute__ ((mode(DI)));
+typedef int word_type __attribute__ ((mode(__word__)));
+
+struct DIstruct {
+	SItype low, high;
+};
+typedef union {
+	struct DIstruct s;
+	DItype ll;
+} DIunion;
+
+DItype __muldi3(DItype u, DItype v)
+{
+	DIunion w;
+	DIunion uu, vv;
+
+	uu.ll = u, vv.ll = v;
+	/*  panic("kernel panic for __muldi3"); */
+	w.ll = __umulsidi3(uu.s.low, vv.s.low);
+	w.s.high += ((USItype) uu.s.low * (USItype) vv.s.high
+		     + (USItype) uu.s.high * (USItype) vv.s.low);
+
+	return w.ll;
+}
diff --git a/arch/mips/cpu/mips32/config.mk b/arch/mips/cpu/mips32/config.mk
index 481e984..7399701 100644
--- a/arch/mips/cpu/mips32/config.mk
+++ b/arch/mips/cpu/mips32/config.mk
@@ -30,5 +30,11 @@
 MIPSFLAGS := -march=mips32r2
 
 PLATFORM_CPPFLAGS += $(MIPSFLAGS)
+PLATFORM_CPPFLAGS += -mabi=32 -DCONFIG_32BIT
+ifdef CONFIG_SYS_BIG_ENDIAN
+PLATFORM_LDFLAGS  += -m elf32btsmip
+else
+PLATFORM_LDFLAGS  += -m elf32ltsmip
+endif
 
 CONFIG_STANDALONE_LOAD_ADDR ?= 0x80200000 -T mips.lds
diff --git a/arch/mips/cpu/mips32/start.S b/arch/mips/cpu/mips32/start.S
index 9c1b2f7..51ce914 100644
--- a/arch/mips/cpu/mips32/start.S
+++ b/arch/mips/cpu/mips32/start.S
@@ -258,8 +258,7 @@ reset:
 #endif
 
 	/* Set up temporary stack */
-	li	t0, CONFIG_SYS_SDRAM_BASE + CONFIG_SYS_INIT_SP_OFFSET
-	la	sp, 0(t0)
+	li	sp, CONFIG_SYS_SDRAM_BASE + CONFIG_SYS_INIT_SP_OFFSET
 
 	la	t9, board_init_f
 	jr	t9
@@ -280,55 +279,41 @@ reset:
 relocate_code:
 	move	sp, a0			# set new stack pointer
 
+	move	s0, a1			# save gd in s0
+	move	s2, a2			# save destination address in s2
+
 	li	t0, CONFIG_SYS_MONITOR_BASE
+	sub	s1, s2, t0		# s1 <-- relocation offset
+
 	la	t3, in_ram
 	lw	t2, -12(t3)		# t2 <-- uboot_end_data
 	move	t1, a2
-	move	s2, a2			# s2 <-- destination address
 
-	/*
-	 * Fix $gp:
-	 *
-	 * New $gp = (Old $gp - CONFIG_SYS_MONITOR_BASE) + Destination Address
-	 */
-	move	t6, gp
-	sub	gp, CONFIG_SYS_MONITOR_BASE
-	add	gp, a2			# gp now adjusted
-	sub	s1, gp, t6		# s1 <-- relocation offset
+	add	gp, s1			# adjust gp
 
 	/*
 	 * t0 = source address
 	 * t1 = target address
 	 * t2 = source end address
 	 */
-
-	/*
-	 * Save destination address and size for later usage in flush_cache()
-	 */
-	move	s0, a1			# save gd in s0
-	move	a0, t1			# a0 <-- destination addr
-	sub	a1, t2, t0		# a1 <-- size
-
 1:
 	lw	t3, 0(t0)
 	sw	t3, 0(t1)
 	addu	t0, 4
-	ble	t0, t2, 1b
+	blt	t0, t2, 1b
 	 addu	t1, 4
 
 	/* If caches were enabled, we would have to flush them here. */
-
-	/* a0 & a1 are already set up for flush_cache(start, size) */
+	sub	a1, t1, s2		# a1 <-- size
 	la	t9, flush_cache
 	jalr	t9
-	 nop
+	 move	a0, s2			# a0 <-- destination address
 
 	/* Jump to where we've relocated ourselves */
 	addi	t0, s2, in_ram - _start
 	jr	t0
 	 nop
 
-	.word	_gp
 	.word	_GLOBAL_OFFSET_TABLE_
 	.word	uboot_end_data
 	.word	uboot_end
@@ -343,9 +328,7 @@ in_ram:
 	 */
 	lw	t3, -4(t0)		# t3 <-- num_got_entries
 	lw	t4, -16(t0)		# t4 <-- _GLOBAL_OFFSET_TABLE_
-	lw	t5, -20(t0)		# t5 <-- _gp
-	sub	t4, t5			# compute offset
-	add	t4, t4, gp		# t4 now holds relocated _G_O_T_
+	add	t4, s1			# t4 now holds relocated _G_O_T_
 	addi	t4, t4, 8		# skipping first two entries
 	li	t2, 2
 1:
@@ -380,6 +363,8 @@ in_ram:
 	/* Exception handlers */
 romReserved:
 	b	romReserved
+	 nop
 
 romExcHandle:
 	b	romExcHandle
+	 nop
diff --git a/arch/mips/cpu/mips64/start.S b/arch/mips/cpu/mips64/start.S
index 2b8d531..1522594 100644
--- a/arch/mips/cpu/mips64/start.S
+++ b/arch/mips/cpu/mips64/start.S
@@ -137,8 +137,7 @@ reset:
 #endif
 
 	/* Set up temporary stack */
-	dli	t0, CONFIG_SYS_SDRAM_BASE + CONFIG_SYS_INIT_SP_OFFSET
-	dla	sp, 0(t0)
+	dli	sp, CONFIG_SYS_SDRAM_BASE + CONFIG_SYS_INIT_SP_OFFSET
 
 	dla	t9, board_init_f
 	jr	t9
@@ -159,55 +158,41 @@ reset:
 relocate_code:
 	move	sp, a0			# set new stack pointer
 
+	move	s0, a1			# save gd in s0
+	move	s2, a2			# save destination address in s2
+
 	dli	t0, CONFIG_SYS_MONITOR_BASE
+	dsub	s1, s2, t0		# s1 <-- relocation offset
+
 	dla	t3, in_ram
 	ld	t2, -24(t3)		# t2 <-- uboot_end_data
 	move	t1, a2
-	move	s2, a2			# s2 <-- destination address
 
-	/*
-	 * Fix $gp:
-	 *
-	 * New $gp = (Old $gp - CONFIG_SYS_MONITOR_BASE) + Destination Address
-	 */
-	move	t8, gp
-	dsub	gp, CONFIG_SYS_MONITOR_BASE
-	dadd	gp, a2			# gp now adjusted
-	dsub	s1, gp, t8		# s1 <-- relocation offset
+	dadd	gp, s1			# adjust gp
 
 	/*
 	 * t0 = source address
 	 * t1 = target address
 	 * t2 = source end address
 	 */
-
-	/*
-	 * Save destination address and size for dlater usage in flush_cache()
-	 */
-	move	s0, a1			# save gd in s0
-	move	a0, t1			# a0 <-- destination addr
-	dsub	a1, t2, t0		# a1 <-- size
-
 1:
 	lw	t3, 0(t0)
 	sw	t3, 0(t1)
 	daddu	t0, 4
-	ble	t0, t2, 1b
+	blt	t0, t2, 1b
 	 daddu	t1, 4
 
 	/* If caches were enabled, we would have to flush them here. */
-
-	/* a0 & a1 are already set up for flush_cache(start, size) */
+	dsub	a1, t1, s2		# a1 <-- size
 	dla	t9, flush_cache
 	jalr	t9
-	 nop
+	 move	a0, s2			# a0 <-- destination address
 
 	/* Jump to where we've relocated ourselves */
 	daddi	t0, s2, in_ram - _start
 	jr	t0
 	 nop
 
-	.dword	_gp
 	.dword	_GLOBAL_OFFSET_TABLE_
 	.dword	uboot_end_data
 	.dword	uboot_end
@@ -222,9 +207,7 @@ in_ram:
 	 */
 	ld	t3, -8(t0)		# t3 <-- num_got_entries
 	ld	t8, -32(t0)		# t8 <-- _GLOBAL_OFFSET_TABLE_
-	ld	t9, -40(t0)		# t9 <-- _gp
-	dsub	t8, t9			# compute offset
-	dadd	t8, t8, gp		# t8 now holds relocated _G_O_T_
+	dadd	t8, s1			# t8 now holds relocated _G_O_T_
 	daddi	t8, t8, 16		# skipping first two entries
 	dli	t2, 2
 1:
@@ -259,3 +242,4 @@ in_ram:
 	/* Exception handlers */
 romReserved:
 	b	romReserved
+	 nop
diff --git a/board/micronas/vct/u-boot.lds b/arch/mips/cpu/u-boot.lds
index 2ce8d0e..37c9d23 100644
--- a/board/micronas/vct/u-boot.lds
+++ b/arch/mips/cpu/u-boot.lds
@@ -21,7 +21,12 @@
  * MA 02111-1307 USA
  */
 
-OUTPUT_FORMAT("elf32-tradbigmips", "elf32-tradbigmips", "elf32-tradlittlemips")
+#if defined(CONFIG_64BIT)
+#define PTR_COUNT_SHIFT	3
+#else
+#define PTR_COUNT_SHIFT	2
+#endif
+
 OUTPUT_ARCH(mips)
 ENTRY(_start)
 SECTIONS
@@ -29,41 +34,51 @@ SECTIONS
 	. = 0x00000000;
 
 	. = ALIGN(4);
-	.text       :
-	{
-	  *(.text*)
+	.text : {
+		*(.text*)
 	}
 
 	. = ALIGN(4);
-	.rodata  : { *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) }
+	.rodata : {
+		*(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
+	}
 
 	. = ALIGN(4);
-	.data  : { *(.data*) }
+	.data : {
+		*(.data*)
+	}
 
 	. = .;
 	_gp = ALIGN(16) + 0x7ff0;
 
 	.got : {
-	  __got_start = .;
-	  *(.got)
-	  __got_end = .;
+		__got_start = .;
+		*(.got)
+		__got_end = .;
 	}
 
 	. = ALIGN(4);
-	.sdata  : { *(.sdata*) }
+	.sdata : {
+		*(.sdata*)
+	}
 
 	. = ALIGN(4);
 	.u_boot_list : {
 		#include <u-boot.lst>
 	}
 
-	. = ALIGN(4);
 	uboot_end_data = .;
-	num_got_entries = (__got_end - __got_start) >> 2;
+
+	num_got_entries = (__got_end - __got_start) >> PTR_COUNT_SHIFT;
 
 	. = ALIGN(4);
-	.sbss (NOLOAD)  : { *(.sbss*) }
-	. = ALIGN(4);
-	.bss (NOLOAD)  : { *(.bss*) }
+	.sbss : {
+		*(.sbss*)
+	}
+
+	.bss : {
+		*(.bss*)
+		. = ALIGN(4);
+	}
 	uboot_end = .;
 }
diff --git a/arch/mips/cpu/xburst/config.mk b/arch/mips/cpu/xburst/config.mk
index 1536746..cf5fa6a 100644
--- a/arch/mips/cpu/xburst/config.mk
+++ b/arch/mips/cpu/xburst/config.mk
@@ -21,5 +21,11 @@
 #
 
 PLATFORM_CPPFLAGS += -march=mips32
+PLATFORM_CPPFLAGS += -mabi=32 -DCONFIG_32BIT
+ifdef CONFIG_SYS_BIG_ENDIAN
+PLATFORM_LDFLAGS  += -m elf32btsmip
+else
+PLATFORM_LDFLAGS  += -m elf32ltsmip
+endif
 
 CONFIG_STANDALONE_LOAD_ADDR ?= 0x80200000 -T mips.lds
diff --git a/arch/mips/cpu/xburst/start.S b/arch/mips/cpu/xburst/start.S
index 3a8280c..50b7fb1 100644
--- a/arch/mips/cpu/xburst/start.S
+++ b/arch/mips/cpu/xburst/start.S
@@ -64,19 +64,13 @@ relocate_code:
 	move	sp, a0			# set new stack pointer
 
 	li	t0, CONFIG_SYS_MONITOR_BASE
+	sub	t6, a2, t0		# t6 <-- relocation offset
+
 	la	t3, in_ram
 	lw	t2, -12(t3)		# t2 <-- uboot_end_data
 	move	t1, a2
 
-	/*
-	 * Fix $gp:
-	 *
-	 * New $gp = (Old $gp - CONFIG_SYS_MONITOR_BASE) + Destination Address
-	 */
-	move	t6, gp
-	sub	gp, CONFIG_SYS_MONITOR_BASE
-	add	gp, a2			# gp now adjusted
-	sub	t6, gp, t6		# t6 <-- relocation offset
+	add	gp, t6			# adjust gp
 
 	/*
 	 * t0 = source address
@@ -87,7 +81,7 @@ relocate_code:
 	lw	t3, 0(t0)
 	sw	t3, 0(t1)
 	addu	t0, 4
-	ble	t0, t2, 1b
+	blt	t0, t2, 1b
 	 addu	t1, 4
 
 	/* If caches were enabled, we would have to flush them here. */
@@ -122,7 +116,6 @@ relocate_code:
 	jr	t0
 	 nop
 
-	.word	_gp
 	.word	_GLOBAL_OFFSET_TABLE_
 	.word	uboot_end_data
 	.word	uboot_end
@@ -137,9 +130,7 @@ in_ram:
 	 */
 	lw	t3, -4(t0)		# t3 <-- num_got_entries
 	lw	t4, -16(t0)		# t4 <-- _GLOBAL_OFFSET_TABLE_
-	lw	t5, -20(t0)		# t5 <-- _gp
-	sub	t4, t5			# compute offset
-	add	t4, t4, gp		# t4 now holds relocated _G_O_T_
+	add	t4, t6			# t4 now holds relocated _G_O_T_
 	addi	t4, t4, 8		# skipping first two entries
 	li	t2, 2
 1:
diff --git a/arch/mips/cpu/xburst/timer.c b/arch/mips/cpu/xburst/timer.c
index b6b3855..8c33d3c 100644
--- a/arch/mips/cpu/xburst/timer.c
+++ b/arch/mips/cpu/xburst/timer.c
@@ -34,24 +34,24 @@ static struct jz4740_tcu *tcu = (struct jz4740_tcu *)JZ4740_TCU_BASE;
 void reset_timer_masked(void)
 {
 	/* reset time */
-	gd->lastinc = readl(&tcu->tcnt0);
-	gd->tbl = 0;
+	gd->arch.lastinc = readl(&tcu->tcnt0);
+	gd->arch.tbl = 0;
 }
 
 ulong get_timer_masked(void)
 {
 	ulong now = readl(&tcu->tcnt0);
 
-	if (gd->lastinc <= now)
-		gd->tbl += now - gd->lastinc; /* normal mode */
+	if (gd->arch.lastinc <= now)
+		gd->arch.tbl += now - gd->arch.lastinc; /* normal mode */
 	else {
 		/* we have an overflow ... */
-		gd->tbl += TIMER_FDATA + now - gd->lastinc;
+		gd->arch.tbl += TIMER_FDATA + now - gd->arch.lastinc;
 	}
 
-	gd->lastinc = now;
+	gd->arch.lastinc = now;
 
-	return gd->tbl;
+	return gd->arch.tbl;
 }
 
 void udelay_masked(unsigned long usec)
@@ -94,8 +94,8 @@ int timer_init(void)
 	writel(1 << TIMER_CHAN, &tcu->tscr); /* enable timer clock */
 	writeb(1 << TIMER_CHAN, &tcu->tesr); /* start counting up */
 
-	gd->lastinc = 0;
-	gd->tbl = 0;
+	gd->arch.lastinc = 0;
+	gd->arch.tbl = 0;
 
 	return 0;
 }
@@ -112,7 +112,7 @@ ulong get_timer(ulong base)
 
 void set_timer(ulong t)
 {
-	gd->tbl = t;
+	gd->arch.tbl = t;
 }
 
 void __udelay(unsigned long usec)
diff --git a/arch/mips/include/asm/global_data.h b/arch/mips/include/asm/global_data.h
index a735a8a..b39737f 100644
--- a/arch/mips/include/asm/global_data.h
+++ b/arch/mips/include/asm/global_data.h
@@ -26,42 +26,16 @@
 
 #include <asm/regdef.h>
 
-/*
- * The following data structure is placed in some memory wich is
- * available very early after boot (like DPRAM on MPC8xx/MPC82xx, or
- * some locked parts of the data cache) to allow for a minimum set of
- * global variables during system initialization (until we have set
- * up the memory controller so that we can use RAM).
- */
-
-typedef	struct	global_data {
-	bd_t		*bd;
-	unsigned long	flags;
+/* Architecture-specific global data */
+struct arch_global_data {
 #ifdef CONFIG_JZSOC
 	/* There are other clocks in the jz4740 */
-	unsigned long	cpu_clk;	/* CPU core clock */
-	unsigned long	sys_clk;	/* System bus clock */
-	unsigned long	per_clk;	/* Peripheral bus clock */
-	unsigned long	mem_clk;	/* Memory bus clock */
-	unsigned long	dev_clk;	/* Device clock */
-	/* "static data" needed by most of timer.c */
-	unsigned long	tbl;
-	unsigned long	lastinc;
-#endif
-	unsigned int	baudrate;
-	unsigned long	have_console;	/* serial_init() was called */
-#ifdef CONFIG_PRE_CONSOLE_BUFFER
-	unsigned long	precon_buf_idx;	/* Pre-Console buffer index */
+	unsigned long per_clk;	/* Peripheral bus clock */
+	unsigned long dev_clk;	/* Device clock */
 #endif
-	phys_size_t	ram_size;	/* RAM size */
-	unsigned long	reloc_off;	/* Relocation Offset */
-	unsigned long	env_addr;	/* Address  of Environment struct */
-	unsigned long	env_valid;	/* Checksum of Environment valid? */
-	void		**jt;		/* jump table */
-	char		env_buf[32];	/* buffer for getenv() before reloc. */
-} gd_t;
+};
 
-#include <asm-generic/global_data_flags.h>
+#include <asm-generic/global_data.h>
 
 #define DECLARE_GLOBAL_DATA_PTR     register volatile gd_t *gd asm ("k0")
 
diff --git a/arch/mips/include/asm/io.h b/arch/mips/include/asm/io.h
index 80eab75..3864c80 100644
--- a/arch/mips/include/asm/io.h
+++ b/arch/mips/include/asm/io.h
@@ -254,7 +254,7 @@ out:
  */
 
 #define __OUT1(s) \
-extern inline void __out##s(unsigned int value, unsigned int port) {
+static inline void __out##s(unsigned int value, unsigned int port) {
 
 #define __OUT2(m) \
 __asm__ __volatile__ ("s" #m "\t%0,%1(%2)"
@@ -268,7 +268,7 @@ __OUT1(s##c_p) __OUT2(m) : : "r" (__ioswab##w(value)), "ir" (port), "r" (mips_io
 	SLOW_DOWN_IO; }
 
 #define __IN1(t,s) \
-extern __inline__ t __in##s(unsigned int port) { t _v;
+static inline t __in##s(unsigned int port) { t _v;
 
 /*
  * Required nops will be inserted by the assembler
@@ -283,7 +283,7 @@ __IN1(t,s##_p) __IN2(m) : "=r" (_v) : "i" (0), "r" (mips_io_port_base+port)); SL
 __IN1(t,s##c_p) __IN2(m) : "=r" (_v) : "ir" (port), "r" (mips_io_port_base)); SLOW_DOWN_IO; return __ioswab##w(_v); }
 
 #define __INS1(s) \
-extern inline void __ins##s(unsigned int port, void * addr, unsigned long count) {
+static inline void __ins##s(unsigned int port, void * addr, unsigned long count) {
 
 #define __INS2(m) \
 if (count) \
@@ -311,7 +311,7 @@ __INS1(s##c) __INS2(m) \
 	: "$1");}
 
 #define __OUTS1(s) \
-extern inline void __outs##s(unsigned int port, const void * addr, unsigned long count) {
+static inline void __outs##s(unsigned int port, const void * addr, unsigned long count) {
 
 #define __OUTS2(m) \
 if (count) \
diff --git a/arch/nds32/include/asm/global_data.h b/arch/nds32/include/asm/global_data.h
index b1feb2c..4927d52 100644
--- a/arch/nds32/include/asm/global_data.h
+++ b/arch/nds32/include/asm/global_data.h
@@ -33,39 +33,12 @@
 
 #ifndef	__ASM_GBL_DATA_H
 #define __ASM_GBL_DATA_H
-/*
- * The following data structure is placed in some memory wich is
- * available very early after boot (like DPRAM on MPC8xx/MPC82xx, or
- * some locked parts of the data cache) to allow for a minimum set of
- * global variables during system initialization (until we have set
- * up the memory controller so that we can use RAM).
- */
-
-typedef	struct global_data {
-	bd_t		*bd;
-	unsigned long	flags;
-	unsigned int	baudrate;
-	unsigned long	have_console;	/* serial_init() was called */
-
-	unsigned long	reloc_off;	/* Relocation Offset */
-	unsigned long	env_addr;	/* Address  of Environment struct */
-	unsigned long	env_valid;	/* Checksum of Environment valid? */
-	unsigned long	fb_base;	/* base address of frame buffer */
-
-	unsigned long	relocaddr;	/* Start address of U-Boot in RAM */
-	phys_size_t	ram_size;	/* RAM size */
-	unsigned long	mon_len;	/* monitor len */
-	unsigned long	irq_sp;		/* irq stack pointer */
-	unsigned long	start_addr_sp;	/* start_addr_stackpointer */
-#if !(defined(CONFIG_SYS_ICACHE_OFF) && defined(CONFIG_SYS_DCACHE_OFF))
-	unsigned long	tlb_addr;
-#endif
 
-	void		**jt;		/* jump table */
-	char		env_buf[32];	/* buffer for getenv() before reloc. */
-} gd_t;
+/* Architecture-specific global data */
+struct arch_global_data {
+};
 
-#include <asm-generic/global_data_flags.h>
+#include <asm-generic/global_data.h>
 
 #ifdef CONFIG_GLOBAL_DATA_NOT_REG10
 extern volatile gd_t g_gd;
diff --git a/arch/nds32/lib/board.c b/arch/nds32/lib/board.c
index 91395ca..09feaf3 100644
--- a/arch/nds32/lib/board.c
+++ b/arch/nds32/lib/board.c
@@ -207,17 +207,6 @@ void board_init_f(ulong bootflag)
 
 	addr = CONFIG_SYS_SDRAM_BASE + gd->ram_size;
 
-#if !(defined(CONFIG_SYS_ICACHE_OFF) && defined(CONFIG_SYS_DCACHE_OFF))
-	/* reserve TLB table */
-	addr -= (4096 * 4);
-
-	/* round down to next 64 kB limit */
-	addr &= ~(0x10000 - 1);
-
-	gd->tlb_addr = addr;
-	debug("TLB table at: %08lx\n", addr);
-#endif
-
 	/* round down to next 4 kB limit */
 	addr &= ~(4096 - 1);
 	debug("Top of RAM usable for U-Boot at: %08lx\n", addr);
diff --git a/arch/nios2/include/asm/global_data.h b/arch/nios2/include/asm/global_data.h
index 413b485..39c5700 100644
--- a/arch/nios2/include/asm/global_data.h
+++ b/arch/nios2/include/asm/global_data.h
@@ -23,28 +23,11 @@
 #ifndef	__ASM_NIOS2_GLOBALDATA_H_
 #define __ASM_NIOS2_GLOBALDATA_H_
 
-typedef	struct	global_data {
-	bd_t		*bd;
-	unsigned long	flags;
-	unsigned int	baudrate;
-	unsigned long	cpu_clk;	/* CPU clock in Hz!		*/
-	unsigned long	have_console;	/* serial_init() was called */
-#ifdef CONFIG_PRE_CONSOLE_BUFFER
-	unsigned long	precon_buf_idx;	/* Pre-Console buffer index */
-#endif
-	phys_size_t	ram_size;	/* RAM size */
-	unsigned long	env_addr;	/* Address  of Environment struct */
-	unsigned long	env_valid;	/* Checksum of Environment valid */
-#if defined(CONFIG_POST) || defined(CONFIG_LOGBUFFER)
-	unsigned long	post_log_word;	/* Record POST activities */
-	unsigned long	post_log_res; /* success of POST test */
-	unsigned long	post_init_f_time; /* When post_init_f started */
-#endif
-	void		**jt;		/* Standalone app jump table */
-	char		env_buf[32];	/* buffer for getenv() before reloc. */
-} gd_t;
+/* Architecture-specific global data */
+struct arch_global_data {
+};
 
-#include <asm-generic/global_data_flags.h>
+#include <asm-generic/global_data.h>
 
 #define DECLARE_GLOBAL_DATA_PTR     register gd_t *gd asm ("gp")
 
diff --git a/arch/openrisc/include/asm/global_data.h b/arch/openrisc/include/asm/global_data.h
index 96f3f1c..d267ccd 100644
--- a/arch/openrisc/include/asm/global_data.h
+++ b/arch/openrisc/include/asm/global_data.h
@@ -24,29 +24,12 @@
 
 #ifndef __ASM_GBL_DATA_H
 #define __ASM_GBL_DATA_H
-/*
- * The following data structure is placed in some memory wich is
- * available very early after boot (like DPRAM on MPC8xx/MPC82xx, or
- * some locked parts of the data cache) to allow for a minimum set of
- * global variables during system initialization (until we have set
- * up the memory controller so that we can use RAM).
- */
 
-typedef struct global_data {
-	bd_t		*bd;
-	unsigned long	flags;
-	unsigned int	baudrate;
-	unsigned long	cpu_clk;	/* CPU clock in Hz! */
-	unsigned long	have_console;	/* serial_init() was called */
-	phys_size_t	ram_size;	/* RAM size */
-	unsigned long	env_addr;	/* Address  of Environment struct */
-	unsigned long	env_valid;	/* Checksum of Environment valid? */
-	unsigned long	fb_base;	/* base address of frame buffer */
-	void		**jt;		/* jump table */
-	char		env_buf[32];	/* buffer for getenv() before reloc. */
-} gd_t;
+/* Architecture-specific global data */
+struct arch_global_data {
+};
 
-#include <asm-generic/global_data_flags.h>
+#include <asm-generic/global_data.h>
 
 /* OR32 GCC already has r10 set as fixed-use */
 #define DECLARE_GLOBAL_DATA_PTR	register volatile gd_t *gd asm ("r10")
diff --git a/arch/powerpc/cpu/mpc512x/cpu.c b/arch/powerpc/cpu/mpc512x/cpu.c
index a1a3bd4..bb03c6d 100644
--- a/arch/powerpc/cpu/mpc512x/cpu.c
+++ b/arch/powerpc/cpu/mpc512x/cpu.c
@@ -68,8 +68,8 @@ int checkcpu (void)
 	}
 	printf ("at %s MHz, CSB at %s MHz (RSR=0x%04lx)\n",
 		strmhz(buf1, clock),
-		strmhz(buf2, gd->csb_clk),
-		gd->reset_status & 0xffff);
+		strmhz(buf2, gd->arch.csb_clk),
+		gd->arch.reset_status & 0xffff);
 	return 0;
 }
 
diff --git a/arch/powerpc/cpu/mpc512x/cpu_init.c b/arch/powerpc/cpu/mpc512x/cpu_init.c
index fe6beaf..32ade1b 100644
--- a/arch/powerpc/cpu/mpc512x/cpu_init.c
+++ b/arch/powerpc/cpu/mpc512x/cpu_init.c
@@ -62,7 +62,7 @@ void cpu_init_f (volatile immap_t * im)
 #endif
 
 	/* RSR - Reset Status Register - clear all status */
-	gd->reset_status = im->reset.rsr;
+	gd->arch.reset_status = im->reset.rsr;
 	out_be32(&im->reset.rsr, ~RSR_RES);
 
 	/*
diff --git a/arch/powerpc/cpu/mpc512x/i2c.c b/arch/powerpc/cpu/mpc512x/i2c.c
index 0ea1280..59040f8 100644
--- a/arch/powerpc/cpu/mpc512x/i2c.c
+++ b/arch/powerpc/cpu/mpc512x/i2c.c
@@ -250,7 +250,7 @@ static int mpc_get_fdr (int speed)
 			{126, 128}
 		};
 
-		ips = gd->ips_clk;
+		ips = gd->arch.ips_clk;
 		for (i = 7; i >= 0; i--) {
 			for (j = 7; j >= 0; j--) {
 				scl = 2 * (scltap[j].scl2tap +
diff --git a/arch/powerpc/cpu/mpc512x/ide.c b/arch/powerpc/cpu/mpc512x/ide.c
index dd6b2f4..7a49673 100644
--- a/arch/powerpc/cpu/mpc512x/ide.c
+++ b/arch/powerpc/cpu/mpc512x/ide.c
@@ -100,7 +100,7 @@ int ide_preinit (void)
 	ide_set_reset(0);
 
 	/* Init timings : we use PIO mode 0 timings */
-	t = 1000000000 / gd->ips_clk;	/* period in ns */
+	t = 1000000000 / gd->arch.ips_clk;	/* period in ns */
 	cfg.bytes.field1 = 3;
 	cfg.bytes.field2 = 3;
 	cfg.bytes.field3 = (pio_specs.t1 + t) / t;
diff --git a/arch/powerpc/cpu/mpc512x/serial.c b/arch/powerpc/cpu/mpc512x/serial.c
index 58587fd..3afbe81 100644
--- a/arch/powerpc/cpu/mpc512x/serial.c
+++ b/arch/powerpc/cpu/mpc512x/serial.c
@@ -140,7 +140,7 @@ void serial_setbrg_dev(unsigned int idx)
 	}
 
 	/* calculate divisor for setting PSC CTUR and CTLR registers */
-	baseclk = (gd->ips_clk + 8) / 16;
+	baseclk = (gd->arch.ips_clk + 8) / 16;
 	div = (baseclk + (baudrate / 2)) / baudrate;
 
 	out_8(&psc->ctur, (div >> 8) & 0xff);
diff --git a/arch/powerpc/cpu/mpc512x/speed.c b/arch/powerpc/cpu/mpc512x/speed.c
index 9d749f2..9a8f315 100644
--- a/arch/powerpc/cpu/mpc512x/speed.c
+++ b/arch/powerpc/cpu/mpc512x/speed.c
@@ -113,9 +113,9 @@ int get_clocks (void)
 		pci_clk = 333333;
 	}
 
-	gd->ips_clk = ips_clk;
+	gd->arch.ips_clk = ips_clk;
 	gd->pci_clk = pci_clk;
-	gd->csb_clk = csb_clk;
+	gd->arch.csb_clk = csb_clk;
 	gd->cpu_clk = core_clk;
 	gd->bus_clk = csb_clk;
 	return 0;
@@ -128,7 +128,7 @@ int get_clocks (void)
  *********************************************/
 ulong get_bus_freq (ulong dummy)
 {
-	return gd->csb_clk;
+	return gd->arch.csb_clk;
 }
 
 int do_clocks (cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[])
@@ -137,10 +137,13 @@ int do_clocks (cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[])
 
 	printf("Clock configuration:\n");
 	printf("  CPU:                 %-4s MHz\n", strmhz(buf, gd->cpu_clk));
-	printf("  Coherent System Bus: %-4s MHz\n", strmhz(buf, gd->csb_clk));
-	printf("  IPS Bus:             %-4s MHz\n", strmhz(buf, gd->ips_clk));
+	printf("  Coherent System Bus: %-4s MHz\n",
+	       strmhz(buf, gd->arch.csb_clk));
+	printf("  IPS Bus:             %-4s MHz\n",
+	       strmhz(buf, gd->arch.ips_clk));
 	printf("  PCI:                 %-4s MHz\n", strmhz(buf, gd->pci_clk));
-	printf("  DDR:                 %-4s MHz\n", strmhz(buf, 2*gd->csb_clk));
+	printf("  DDR:                 %-4s MHz\n",
+	       strmhz(buf, 2 * gd->arch.csb_clk));
 	return 0;
 }
 
diff --git a/arch/powerpc/cpu/mpc5xxx/i2c.c b/arch/powerpc/cpu/mpc5xxx/i2c.c
index b423d2f..8d5f47b 100644
--- a/arch/powerpc/cpu/mpc5xxx/i2c.c
+++ b/arch/powerpc/cpu/mpc5xxx/i2c.c
@@ -310,7 +310,7 @@ static int mpc_get_fdr(int speed)
 			{126, 128}
 		};
 
-		ipb = gd->ipb_clk;
+		ipb = gd->arch.ipb_clk;
 		for (i = 7; i >= 0; i--) {
 			for (j = 7; j >= 0; j--) {
 				scl = 2 * (scltap[j].scl2tap +
diff --git a/arch/powerpc/cpu/mpc5xxx/ide.c b/arch/powerpc/cpu/mpc5xxx/ide.c
index d337abb..094f62b 100644
--- a/arch/powerpc/cpu/mpc5xxx/ide.c
+++ b/arch/powerpc/cpu/mpc5xxx/ide.c
@@ -75,7 +75,7 @@ int ide_preinit (void)
 	psdma->PtdCntrl |= 1;
 
 	/* Init timings : we use PIO mode 0 timings */
-	period = 1000000000 / gd->ipb_clk;	/* period in ns */
+	period = 1000000000 / gd->arch.ipb_clk;	/* period in ns */
 
 	t0 = CALC_TIMING (600);
 	t2_8 = CALC_TIMING (290);
diff --git a/arch/powerpc/cpu/mpc5xxx/serial.c b/arch/powerpc/cpu/mpc5xxx/serial.c
index eb14161..1ccb4e3 100644
--- a/arch/powerpc/cpu/mpc5xxx/serial.c
+++ b/arch/powerpc/cpu/mpc5xxx/serial.c
@@ -89,7 +89,7 @@ int serial_init_dev (unsigned long dev_base)
 
 	/* select clock sources */
 	psc->psc_clock_select = 0;
-	baseclk = (gd->ipb_clk + 16) / 32;
+	baseclk = (gd->arch.ipb_clk + 16) / 32;
 
 	/* switch to UART mode */
 	psc->sicr = 0;
@@ -169,7 +169,7 @@ void serial_setbrg_dev (unsigned long dev_base)
 	volatile struct mpc5xxx_psc *psc = (struct mpc5xxx_psc *)dev_base;
 	unsigned long baseclk, div;
 
-	baseclk = (gd->ipb_clk + 16) / 32;
+	baseclk = (gd->arch.ipb_clk + 16) / 32;
 
 	/* set up UART divisor */
 	div = (baseclk + (gd->baudrate/2)) / gd->baudrate;
diff --git a/arch/powerpc/cpu/mpc5xxx/speed.c b/arch/powerpc/cpu/mpc5xxx/speed.c
index 8027d3e..5353e3d 100644
--- a/arch/powerpc/cpu/mpc5xxx/speed.c
+++ b/arch/powerpc/cpu/mpc5xxx/speed.c
@@ -66,14 +66,20 @@ int get_clocks (void)
 
 	val = *(vu_long *)MPC5XXX_CDM_CFG;
 	if (val & (1 << 8)) {
-		gd->ipb_clk = gd->bus_clk / 2;
+		gd->arch.ipb_clk = gd->bus_clk / 2;
 	} else {
-		gd->ipb_clk = gd->bus_clk;
+		gd->arch.ipb_clk = gd->bus_clk;
 	}
 	switch (val & 3) {
-		case 0: gd->pci_clk = gd->ipb_clk; break;
-		case 1: gd->pci_clk = gd->ipb_clk / 2; break;
-		default: gd->pci_clk = gd->bus_clk / 4; break;
+	case 0:
+		gd->pci_clk = gd->arch.ipb_clk;
+		break;
+	case 1:
+		gd->pci_clk = gd->arch.ipb_clk / 2;
+		break;
+	default:
+		gd->pci_clk = gd->bus_clk / 4;
+		break;
 	}
 
 	return (0);
@@ -85,7 +91,7 @@ int prt_mpc5xxx_clks (void)
 
 	printf ("       Bus %s MHz, IPB %s MHz, PCI %s MHz\n",
 		strmhz(buf1, gd->bus_clk),
-		strmhz(buf2, gd->ipb_clk),
+		strmhz(buf2, gd->arch.ipb_clk),
 		strmhz(buf3, gd->pci_clk)
 	);
 	return (0);
diff --git a/arch/powerpc/cpu/mpc8220/fec.c b/arch/powerpc/cpu/mpc8220/fec.c
index aaf9be1..43fa802 100644
--- a/arch/powerpc/cpu/mpc8220/fec.c
+++ b/arch/powerpc/cpu/mpc8220/fec.c
@@ -288,9 +288,11 @@ static int mpc8220_fec_init (struct eth_device *dev, bd_t * bis)
 		 * Set MII_SPEED = (1/(mii_speed * 2)) * System Clock
 		 * and do not drop the Preamble.
 		 */
-		/* tbd - rtm */
-		/*fec->eth->mii_speed = (((gd->ipb_clk >> 20) / 5) << 1); */
-		/* No MII for 7-wire mode */
+		/*
+		 * tbd - rtm
+		 * fec->eth->mii_speed = (((gd->arch.ipb_clk >> 20) / 5) << 1);
+		 * No MII for 7-wire mode
+		 */
 		fec->eth->mii_speed = 0x00000030;
 	}
 
diff --git a/arch/powerpc/cpu/mpc8220/speed.c b/arch/powerpc/cpu/mpc8220/speed.c
index 62ac845..bb72e5c 100644
--- a/arch/powerpc/cpu/mpc8220/speed.c
+++ b/arch/powerpc/cpu/mpc8220/speed.c
@@ -71,7 +71,7 @@ int get_clocks (void)
 #error clock measuring not implemented yet - define CONFIG_SYS_MPC8220_CLKIN
 #endif
 
-	gd->inp_clk = CONFIG_SYS_MPC8220_CLKIN;
+	gd->arch.inp_clk = CONFIG_SYS_MPC8220_CLKIN;
 
 	/* Read XLB to PCI(INP) clock multiplier */
 	pci2bus = (*((volatile u32 *)PCI_REG_PCIGSCR) &
@@ -85,7 +85,7 @@ int get_clocks (void)
 
 	/* FlexBus is temporary set as the same as input clock */
 	/* will do dynamic in the future */
-	gd->flb_clk = CONFIG_SYS_MPC8220_CLKIN;
+	gd->arch.flb_clk = CONFIG_SYS_MPC8220_CLKIN;
 
 	/* CPU Clock - Read HID1 */
 	asm volatile ("mfspr %0, 1009":"=r" (hid1):);
@@ -97,12 +97,14 @@ int get_clocks (void)
 	for (i = 0; i < size; i++)
 		if (hid1 == bus2core[i].hid1) {
 			gd->cpu_clk = (bus2core[i].multi * gd->bus_clk) >> 1;
-			gd->vco_clk = CONFIG_SYS_MPC8220_SYSPLL_VCO_MULTIPLIER * (gd->pci_clk * bus2core[i].vco_div)/2;
+			gd->arch.vco_clk =
+				CONFIG_SYS_MPC8220_SYSPLL_VCO_MULTIPLIER *
+				(gd->pci_clk * bus2core[i].vco_div) / 2;
 			break;
 		}
 
 	/* hardcoded 81MHz for now */
-	gd->pev_clk = 81000000;
+	gd->arch.pev_clk = 81000000;
 
 	return (0);
 }
@@ -115,7 +117,7 @@ int prt_mpc8220_clks (void)
 		strmhz(buf1, gd->bus_clk),
 		strmhz(buf2, gd->cpu_clk),
 		strmhz(buf3, gd->pci_clk),
-		strmhz(buf4, gd->vco_clk)
+		strmhz(buf4, gd->arch.vco_clk)
 	);
 	return (0);
 }
diff --git a/arch/powerpc/cpu/mpc8260/commproc.c b/arch/powerpc/cpu/mpc8260/commproc.c
index 082957e..22cef3e 100644
--- a/arch/powerpc/cpu/mpc8260/commproc.c
+++ b/arch/powerpc/cpu/mpc8260/commproc.c
@@ -30,8 +30,8 @@ m8260_cpm_reset(void)
 
 	/* Reclaim the DP memory for our use.
 	*/
-	gd->dp_alloc_base = CPM_DATAONLY_BASE;
-	gd->dp_alloc_top = gd->dp_alloc_base + CPM_DATAONLY_SIZE;
+	gd->arch.dp_alloc_base = CPM_DATAONLY_BASE;
+	gd->arch.dp_alloc_top = gd->arch.dp_alloc_base + CPM_DATAONLY_SIZE;
 
 	/*
 	 * Reset CPM
@@ -60,21 +60,22 @@ m8260_cpm_dpalloc(uint size, uint align)
 	uint	savebase;
 
 	align_mask = align - 1;
-	savebase = gd->dp_alloc_base;
+	savebase = gd->arch.dp_alloc_base;
 
-	if ((off = (gd->dp_alloc_base & align_mask)) != 0)
-		gd->dp_alloc_base += (align - off);
+	off = gd->arch.dp_alloc_base & align_mask;
+	if (off != 0)
+		gd->arch.dp_alloc_base += (align - off);
 
 	if ((off = size & align_mask) != 0)
 		size += align - off;
 
-	if ((gd->dp_alloc_base + size) >= gd->dp_alloc_top) {
-		gd->dp_alloc_base = savebase;
+	if ((gd->arch.dp_alloc_base + size) >= gd->arch.dp_alloc_top) {
+		gd->arch.dp_alloc_base = savebase;
 		panic("m8260_cpm_dpalloc: ran out of dual port ram!");
 	}
 
-	retloc = gd->dp_alloc_base;
-	gd->dp_alloc_base += size;
+	retloc = gd->arch.dp_alloc_base;
+	gd->arch.dp_alloc_base += size;
 
 	memset((void *)&immr->im_dprambase[retloc], 0, size);
 
@@ -101,7 +102,7 @@ m8260_cpm_hostalloc(uint size, uint align)
  * Baud rate clocks are zero-based in the driver code (as that maps
  * to port numbers).  Documentation uses 1-based numbering.
  */
-#define BRG_INT_CLK	gd->brg_clk
+#define BRG_INT_CLK	gd->arch.brg_clk
 #define BRG_UART_CLK	(BRG_INT_CLK / 16)
 
 /* This function is used by UARTs, or anything else that uses a 16x
diff --git a/arch/powerpc/cpu/mpc8260/cpu_init.c b/arch/powerpc/cpu/mpc8260/cpu_init.c
index acd48a9..3964e60 100644
--- a/arch/powerpc/cpu/mpc8260/cpu_init.c
+++ b/arch/powerpc/cpu/mpc8260/cpu_init.c
@@ -120,7 +120,7 @@ void cpu_init_f (volatile immap_t * immr)
 	memset ((void *) gd, 0, sizeof (gd_t));
 
 	/* RSR - Reset Status Register - clear all status (5-4) */
-	gd->reset_status = immr->im_clkrst.car_rsr;
+	gd->arch.reset_status = immr->im_clkrst.car_rsr;
 	immr->im_clkrst.car_rsr = RSR_ALLBITS;
 
 	/* RMR - Reset Mode Register - contains checkstop reset enable (5-5) */
@@ -274,7 +274,7 @@ int prt_8260_rsr (void)
 		RSR_EHRS, "External Hard"}
 	};
 	static int n = sizeof bits / sizeof bits[0];
-	ulong rsr = gd->reset_status;
+	ulong rsr = gd->arch.reset_status;
 	int i;
 	char *sep;
 
diff --git a/arch/powerpc/cpu/mpc8260/i2c.c b/arch/powerpc/cpu/mpc8260/i2c.c
index 7382cba..b720b1f 100644
--- a/arch/powerpc/cpu/mpc8260/i2c.c
+++ b/arch/powerpc/cpu/mpc8260/i2c.c
@@ -259,7 +259,7 @@ void i2c_init(int speed, int slaveadd)
 	 * divide BRGCLK by 1)
 	 */
 	debug("[I2C] Setting rate...\n");
-	i2c_setrate(gd->brg_clk, CONFIG_SYS_I2C_SPEED);
+	i2c_setrate(gd->arch.brg_clk, CONFIG_SYS_I2C_SPEED);
 
 	/* Set I2C controller in master mode */
 	i2c->i2c_i2com = 0x01;
diff --git a/arch/powerpc/cpu/mpc8260/speed.c b/arch/powerpc/cpu/mpc8260/speed.c
index bb50dee..7841e8a 100644
--- a/arch/powerpc/cpu/mpc8260/speed.c
+++ b/arch/powerpc/cpu/mpc8260/speed.c
@@ -135,17 +135,17 @@ int get_clocks (void)
 	    (get_pvr () == PVR_8260_HIP7R1) ||
 	    (get_pvr () == PVR_8260_HIP7RA)) {
 		pllmf = (scmr & SCMR_PLLMF_MSKH7) >> SCMR_PLLMF_SHIFT;
-		gd->vco_out = clkin * (pllmf + 1);
+		gd->arch.vco_out = clkin * (pllmf + 1);
 	} else {                        /* HiP3, HiP4 */
 		pllmf = (scmr & SCMR_PLLMF_MSK) >> SCMR_PLLMF_SHIFT;
 		plldf = (scmr & SCMR_PLLDF) ? 1 : 0;
-		gd->vco_out = (clkin * 2 * (pllmf + 1)) / (plldf + 1);
+		gd->arch.vco_out = (clkin * 2 * (pllmf + 1)) / (plldf + 1);
 	}
 
-	gd->cpm_clk = gd->vco_out / 2;
+	gd->arch.cpm_clk = gd->arch.vco_out / 2;
 	gd->bus_clk = clkin;
-	gd->scc_clk = gd->vco_out / 4;
-	gd->brg_clk = gd->vco_out / (1 << (2 * (dfbrg + 1)));
+	gd->arch.scc_clk = gd->arch.vco_out / 4;
+	gd->arch.brg_clk = gd->arch.vco_out / (1 << (2 * (dfbrg + 1)));
 
 	if (cp->b2c_mult > 0) {
 		gd->cpu_clk = (clkin * cp->b2c_mult) / 2;
@@ -173,7 +173,7 @@ int get_clocks (void)
 			pci_div = pcidf + 1;
 		}
 
-		gd->pci_clk = (gd->cpm_clk * 2) / pci_div;
+		gd->pci_clk = (gd->arch.cpm_clk * 2) / pci_div;
 	}
 #endif
 
@@ -231,10 +231,10 @@ int prt_8260_clks (void)
 			plldf, pllmf, pcidf);
 
 	printf (" - vco_out %10ld, scc_clk %10ld, brg_clk %10ld\n",
-			gd->vco_out, gd->scc_clk, gd->brg_clk);
+			gd->arch.vco_out, gd->arch.scc_clk, gd->arch.brg_clk);
 
 	printf (" - cpu_clk %10ld, cpm_clk %10ld, bus_clk %10ld\n",
-			gd->cpu_clk, gd->cpm_clk, gd->bus_clk);
+			gd->cpu_clk, gd->arch.cpm_clk, gd->bus_clk);
 #ifdef CONFIG_PCI
 	printf (" - pci_clk %10ld\n", gd->pci_clk);
 #endif
diff --git a/arch/powerpc/cpu/mpc83xx/cpu.c b/arch/powerpc/cpu/mpc83xx/cpu.c
index e64b0c3..cc20234 100644
--- a/arch/powerpc/cpu/mpc83xx/cpu.c
+++ b/arch/powerpc/cpu/mpc83xx/cpu.c
@@ -122,7 +122,7 @@ int checkcpu(void)
 
 	printf(" at %s MHz, ", strmhz(buf, clock));
 
-	printf("CSB: %s MHz\n", strmhz(buf, gd->csb_clk));
+	printf("CSB: %s MHz\n", strmhz(buf, gd->arch.csb_clk));
 
 	return 0;
 }
diff --git a/arch/powerpc/cpu/mpc83xx/cpu_init.c b/arch/powerpc/cpu/mpc83xx/cpu_init.c
index 20d0600..5153351 100644
--- a/arch/powerpc/cpu/mpc83xx/cpu_init.c
+++ b/arch/powerpc/cpu/mpc83xx/cpu_init.c
@@ -232,12 +232,12 @@ void cpu_init_f (volatile immap_t * im)
 	clrsetbits_be32(&im->clk.sccr, sccr_mask, sccr_val);
 
 	/* RSR - Reset Status Register - clear all status (4.6.1.3) */
-	gd->reset_status = __raw_readl(&im->reset.rsr);
+	gd->arch.reset_status = __raw_readl(&im->reset.rsr);
 	__raw_writel(~(RSR_RES), &im->reset.rsr);
 
 	/* AER - Arbiter Event Register - store status */
-	gd->arbiter_event_attributes = __raw_readl(&im->arbiter.aeatr);
-	gd->arbiter_event_address = __raw_readl(&im->arbiter.aeadr);
+	gd->arch.arbiter_event_attributes = __raw_readl(&im->arbiter.aeatr);
+	gd->arch.arbiter_event_address = __raw_readl(&im->arbiter.aeadr);
 
 	/*
 	 * RMR - Reset Mode Register
@@ -440,42 +440,44 @@ static int print_83xx_arb_event(int force)
 		"reserved"
 	};
 
-	int etype = (gd->arbiter_event_attributes & AEATR_EVENT)
+	int etype = (gd->arch.arbiter_event_attributes & AEATR_EVENT)
 	            >> AEATR_EVENT_SHIFT;
-	int mstr_id = (gd->arbiter_event_attributes & AEATR_MSTR_ID)
+	int mstr_id = (gd->arch.arbiter_event_attributes & AEATR_MSTR_ID)
 	              >> AEATR_MSTR_ID_SHIFT;
-	int tbst = (gd->arbiter_event_attributes & AEATR_TBST)
+	int tbst = (gd->arch.arbiter_event_attributes & AEATR_TBST)
 	           >> AEATR_TBST_SHIFT;
-	int tsize = (gd->arbiter_event_attributes & AEATR_TSIZE)
+	int tsize = (gd->arch.arbiter_event_attributes & AEATR_TSIZE)
 	            >> AEATR_TSIZE_SHIFT;
-	int ttype = (gd->arbiter_event_attributes & AEATR_TTYPE)
+	int ttype = (gd->arch.arbiter_event_attributes & AEATR_TTYPE)
 	            >> AEATR_TTYPE_SHIFT;
 
-	if (!force && !gd->arbiter_event_address)
+	if (!force && !gd->arch.arbiter_event_address)
 		return 0;
 
 	puts("Arbiter Event Status:\n");
-	printf("       Event Address: 0x%08lX\n", gd->arbiter_event_address);
+	printf("       Event Address: 0x%08lX\n",
+	       gd->arch.arbiter_event_address);
 	printf("       Event Type:    0x%1x  = %s\n", etype, event[etype]);
 	printf("       Master ID:     0x%02x = %s\n", mstr_id, master[mstr_id]);
 	printf("       Transfer Size: 0x%1x  = %d bytes\n", (tbst<<3) | tsize,
 				tbst ? (tsize ? tsize : 8) : 16 + 8 * tsize);
 	printf("       Transfer Type: 0x%02x = %s\n", ttype, transfer[ttype]);
 
-	return gd->arbiter_event_address;
+	return gd->arch.arbiter_event_address;
 }
 
 #elif defined(CONFIG_DISPLAY_AER_BRIEF)
 
 static int print_83xx_arb_event(int force)
 {
-	if (!force && !gd->arbiter_event_address)
+	if (!force && !gd->arch.arbiter_event_address)
 		return 0;
 
 	printf("Arbiter Event Status: AEATR=0x%08lX, AEADR=0x%08lX\n",
-		gd->arbiter_event_attributes, gd->arbiter_event_address);
+		gd->arch.arbiter_event_attributes,
+		gd->arch.arbiter_event_address);
 
-	return gd->arbiter_event_address;
+	return gd->arch.arbiter_event_address;
 }
 #endif /* CONFIG_DISPLAY_AER_xxxx */
 
@@ -499,7 +501,7 @@ int prt_83xx_rsr(void)
 		RSR_HRS,  "External/Internal Hard"}
 	};
 	static int n = sizeof bits / sizeof bits[0];
-	ulong rsr = gd->reset_status;
+	ulong rsr = gd->arch.reset_status;
 	int i;
 	char *sep;
 
diff --git a/arch/powerpc/cpu/mpc83xx/fdt.c b/arch/powerpc/cpu/mpc83xx/fdt.c
index 1f54781..fe553a7 100644
--- a/arch/powerpc/cpu/mpc83xx/fdt.c
+++ b/arch/powerpc/cpu/mpc83xx/fdt.c
@@ -118,7 +118,7 @@ void ft_cpu_setup(void *blob, bd_t *bd)
 	do_fixup_by_prop_u32(blob, "device_type", "cpu", 4,
 		"bus-frequency", bd->bi_busfreq, 1);
 	do_fixup_by_prop_u32(blob, "device_type", "cpu", 4,
-		"clock-frequency", gd->core_clk, 1);
+		"clock-frequency", gd->arch.core_clk, 1);
 	do_fixup_by_prop_u32(blob, "device_type", "soc", 4,
 		"bus-frequency", bd->bi_busfreq, 1);
 	do_fixup_by_compat_u32(blob, "fsl,soc",
diff --git a/arch/powerpc/cpu/mpc83xx/pcie.c b/arch/powerpc/cpu/mpc83xx/pcie.c
index 52d4461..609b133 100644
--- a/arch/powerpc/cpu/mpc83xx/pcie.c
+++ b/arch/powerpc/cpu/mpc83xx/pcie.c
@@ -286,8 +286,8 @@ static void mpc83xx_pcie_init_bus(int bus, struct pci_region *reg)
 	get_clocks();
 	/* Configure the PCIE controller core clock ratio */
 	out_le32(hose_cfg_base + PEX_GCLK_RATIO,
-		(((bus ? gd->pciexp2_clk : gd->pciexp1_clk) / 1000000) * 16)
-		/ 333);
+		(((bus ? gd->arch.pciexp2_clk : gd->arch.pciexp1_clk)
+			/ 1000000) * 16) / 333);
 	udelay(1000000);
 
 	/* Do Type 1 bridge configuration */
diff --git a/arch/powerpc/cpu/mpc83xx/speed.c b/arch/powerpc/cpu/mpc83xx/speed.c
index b8c05d1..6be0e3a 100644
--- a/arch/powerpc/cpu/mpc83xx/speed.c
+++ b/arch/powerpc/cpu/mpc83xx/speed.c
@@ -462,53 +462,53 @@ int get_clocks(void)
 	brg_clk = qe_clk / 2;
 #endif
 
-	gd->csb_clk = csb_clk;
+	gd->arch.csb_clk = csb_clk;
 #if defined(CONFIG_MPC8308) || defined(CONFIG_MPC831x) || \
 	defined(CONFIG_MPC834x) || defined(CONFIG_MPC837x)
-	gd->tsec1_clk = tsec1_clk;
-	gd->tsec2_clk = tsec2_clk;
-	gd->usbdr_clk = usbdr_clk;
+	gd->arch.tsec1_clk = tsec1_clk;
+	gd->arch.tsec2_clk = tsec2_clk;
+	gd->arch.usbdr_clk = usbdr_clk;
 #elif defined(CONFIG_MPC8309)
-	gd->usbdr_clk = usbdr_clk;
+	gd->arch.usbdr_clk = usbdr_clk;
 #endif
 #if defined(CONFIG_MPC834x)
-	gd->usbmph_clk = usbmph_clk;
+	gd->arch.usbmph_clk = usbmph_clk;
 #endif
 #if defined(CONFIG_MPC8315)
-	gd->tdm_clk = tdm_clk;
+	gd->arch.tdm_clk = tdm_clk;
 #endif
 #if defined(CONFIG_FSL_ESDHC)
-	gd->sdhc_clk = sdhc_clk;
+	gd->arch.sdhc_clk = sdhc_clk;
 #endif
-	gd->core_clk = core_clk;
-	gd->i2c1_clk = i2c1_clk;
+	gd->arch.core_clk = core_clk;
+	gd->arch.i2c1_clk = i2c1_clk;
 #if !defined(CONFIG_MPC832x)
-	gd->i2c2_clk = i2c2_clk;
+	gd->arch.i2c2_clk = i2c2_clk;
 #endif
 #if !defined(CONFIG_MPC8309)
-	gd->enc_clk = enc_clk;
+	gd->arch.enc_clk = enc_clk;
 #endif
-	gd->lbiu_clk = lbiu_clk;
-	gd->lclk_clk = lclk_clk;
+	gd->arch.lbiu_clk = lbiu_clk;
+	gd->arch.lclk_clk = lclk_clk;
 	gd->mem_clk = mem_clk;
 #if defined(CONFIG_MPC8360)
-	gd->mem_sec_clk = mem_sec_clk;
+	gd->arch.mem_sec_clk = mem_sec_clk;
 #endif
 #if defined(CONFIG_QE)
-	gd->qe_clk = qe_clk;
-	gd->brg_clk = brg_clk;
+	gd->arch.qe_clk = qe_clk;
+	gd->arch.brg_clk = brg_clk;
 #endif
 #if defined(CONFIG_MPC8308) || defined(CONFIG_MPC831x) || \
 	defined(CONFIG_MPC837x)
-	gd->pciexp1_clk = pciexp1_clk;
-	gd->pciexp2_clk = pciexp2_clk;
+	gd->arch.pciexp1_clk = pciexp1_clk;
+	gd->arch.pciexp2_clk = pciexp2_clk;
 #endif
 #if defined(CONFIG_MPC837x) || defined(CONFIG_MPC8315)
-	gd->sata_clk = sata_clk;
+	gd->arch.sata_clk = sata_clk;
 #endif
 	gd->pci_clk = pci_sync_in;
-	gd->cpu_clk = gd->core_clk;
-	gd->bus_clk = gd->csb_clk;
+	gd->cpu_clk = gd->arch.core_clk;
+	gd->bus_clk = gd->arch.csb_clk;
 	return 0;
 
 }
@@ -519,7 +519,7 @@ int get_clocks(void)
  *********************************************/
 ulong get_bus_freq(ulong dummy)
 {
-	return gd->csb_clk;
+	return gd->arch.csb_clk;
 }
 
 /********************************************
@@ -536,49 +536,69 @@ static int do_clocks(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 	char buf[32];
 
 	printf("Clock configuration:\n");
-	printf("  Core:                %-4s MHz\n", strmhz(buf, gd->core_clk));
-	printf("  Coherent System Bus: %-4s MHz\n", strmhz(buf, gd->csb_clk));
+	printf("  Core:                %-4s MHz\n",
+	       strmhz(buf, gd->arch.core_clk));
+	printf("  Coherent System Bus: %-4s MHz\n",
+	       strmhz(buf, gd->arch.csb_clk));
 #if defined(CONFIG_QE)
-	printf("  QE:                  %-4s MHz\n", strmhz(buf, gd->qe_clk));
-	printf("  BRG:                 %-4s MHz\n", strmhz(buf, gd->brg_clk));
-#endif
-	printf("  Local Bus Controller:%-4s MHz\n", strmhz(buf, gd->lbiu_clk));
-	printf("  Local Bus:           %-4s MHz\n", strmhz(buf, gd->lclk_clk));
+	printf("  QE:                  %-4s MHz\n",
+	       strmhz(buf, gd->arch.qe_clk));
+	printf("  BRG:                 %-4s MHz\n",
+	       strmhz(buf, gd->arch.brg_clk));
+#endif
+	printf("  Local Bus Controller:%-4s MHz\n",
+	       strmhz(buf, gd->arch.lbiu_clk));
+	printf("  Local Bus:           %-4s MHz\n",
+	       strmhz(buf, gd->arch.lclk_clk));
 	printf("  DDR:                 %-4s MHz\n", strmhz(buf, gd->mem_clk));
 #if defined(CONFIG_MPC8360)
-	printf("  DDR Secondary:       %-4s MHz\n", strmhz(buf, gd->mem_sec_clk));
+	printf("  DDR Secondary:       %-4s MHz\n",
+	       strmhz(buf, gd->arch.mem_sec_clk));
 #endif
 #if !defined(CONFIG_MPC8309)
-	printf("  SEC:                 %-4s MHz\n", strmhz(buf, gd->enc_clk));
+	printf("  SEC:                 %-4s MHz\n",
+	       strmhz(buf, gd->arch.enc_clk));
 #endif
-	printf("  I2C1:                %-4s MHz\n", strmhz(buf, gd->i2c1_clk));
+	printf("  I2C1:                %-4s MHz\n",
+	       strmhz(buf, gd->arch.i2c1_clk));
 #if !defined(CONFIG_MPC832x)
-	printf("  I2C2:                %-4s MHz\n", strmhz(buf, gd->i2c2_clk));
+	printf("  I2C2:                %-4s MHz\n",
+	       strmhz(buf, gd->arch.i2c2_clk));
 #endif
 #if defined(CONFIG_MPC8315)
-	printf("  TDM:                 %-4s MHz\n", strmhz(buf, gd->tdm_clk));
+	printf("  TDM:                 %-4s MHz\n",
+	       strmhz(buf, gd->arch.tdm_clk));
 #endif
 #if defined(CONFIG_FSL_ESDHC)
-	printf("  SDHC:                %-4s MHz\n", strmhz(buf, gd->sdhc_clk));
+	printf("  SDHC:                %-4s MHz\n",
+	       strmhz(buf, gd->arch.sdhc_clk));
 #endif
 #if defined(CONFIG_MPC8308) || defined(CONFIG_MPC831x) || \
 	defined(CONFIG_MPC834x) || defined(CONFIG_MPC837x)
-	printf("  TSEC1:               %-4s MHz\n", strmhz(buf, gd->tsec1_clk));
-	printf("  TSEC2:               %-4s MHz\n", strmhz(buf, gd->tsec2_clk));
-	printf("  USB DR:              %-4s MHz\n", strmhz(buf, gd->usbdr_clk));
+	printf("  TSEC1:               %-4s MHz\n",
+	       strmhz(buf, gd->arch.tsec1_clk));
+	printf("  TSEC2:               %-4s MHz\n",
+	       strmhz(buf, gd->arch.tsec2_clk));
+	printf("  USB DR:              %-4s MHz\n",
+	       strmhz(buf, gd->arch.usbdr_clk));
 #elif defined(CONFIG_MPC8309)
-	printf("  USB DR:              %-4s MHz\n", strmhz(buf, gd->usbdr_clk));
+	printf("  USB DR:              %-4s MHz\n",
+	       strmhz(buf, gd->arch.usbdr_clk));
 #endif
 #if defined(CONFIG_MPC834x)
-	printf("  USB MPH:             %-4s MHz\n", strmhz(buf, gd->usbmph_clk));
+	printf("  USB MPH:             %-4s MHz\n",
+	       strmhz(buf, gd->arch.usbmph_clk));
 #endif
 #if defined(CONFIG_MPC8308) || defined(CONFIG_MPC831x) || \
 	defined(CONFIG_MPC837x)
-	printf("  PCIEXP1:             %-4s MHz\n", strmhz(buf, gd->pciexp1_clk));
-	printf("  PCIEXP2:             %-4s MHz\n", strmhz(buf, gd->pciexp2_clk));
+	printf("  PCIEXP1:             %-4s MHz\n",
+	       strmhz(buf, gd->arch.pciexp1_clk));
+	printf("  PCIEXP2:             %-4s MHz\n",
+	       strmhz(buf, gd->arch.pciexp2_clk));
 #endif
 #if defined(CONFIG_MPC837x) || defined(CONFIG_MPC8315)
-	printf("  SATA:                %-4s MHz\n", strmhz(buf, gd->sata_clk));
+	printf("  SATA:                %-4s MHz\n",
+	       strmhz(buf, gd->arch.sata_clk));
 #endif
 	return 0;
 }
diff --git a/arch/powerpc/cpu/mpc85xx/Makefile b/arch/powerpc/cpu/mpc85xx/Makefile
index 4c2b104..6776c85 100644
--- a/arch/powerpc/cpu/mpc85xx/Makefile
+++ b/arch/powerpc/cpu/mpc85xx/Makefile
@@ -83,8 +83,10 @@ COBJS-$(CONFIG_PPC_P4080)	+= ddr-gen3.o
 COBJS-$(CONFIG_PPC_P5020)	+= ddr-gen3.o
 COBJS-$(CONFIG_PPC_P5040)	+= ddr-gen3.o
 COBJS-$(CONFIG_PPC_T4240)	+= ddr-gen3.o
+COBJS-$(CONFIG_PPC_B4420)	+= ddr-gen3.o
 COBJS-$(CONFIG_PPC_B4860)	+= ddr-gen3.o
 COBJS-$(CONFIG_BSC9131)		+= ddr-gen3.o
+COBJS-$(CONFIG_BSC9132)		+= ddr-gen3.o
 
 COBJS-$(CONFIG_CPM2)	+= ether_fcc.o
 COBJS-$(CONFIG_OF_LIBFDT) += fdt.o
@@ -100,6 +102,7 @@ COBJS-$(CONFIG_PPC_P4080) += p4080_ids.o
 COBJS-$(CONFIG_PPC_P5020) += p5020_ids.o
 COBJS-$(CONFIG_PPC_P5040) += p5040_ids.o
 COBJS-$(CONFIG_PPC_T4240) += t4240_ids.o
+COBJS-$(CONFIG_PPC_B4420) += b4860_ids.o
 COBJS-$(CONFIG_PPC_B4860) += b4860_ids.o
 
 COBJS-$(CONFIG_QE)	+= qe_io.o
@@ -134,7 +137,9 @@ COBJS-$(CONFIG_PPC_P4080) += p4080_serdes.o
 COBJS-$(CONFIG_PPC_P5020) += p5020_serdes.o
 COBJS-$(CONFIG_PPC_P5040) += p5040_serdes.o
 COBJS-$(CONFIG_PPC_T4240) += t4240_serdes.o
+COBJS-$(CONFIG_PPC_B4420) += b4860_serdes.o
 COBJS-$(CONFIG_PPC_B4860) += b4860_serdes.o
+COBJS-$(CONFIG_BSC9132) += bsc9132_serdes.o
 
 COBJS-y	+= cpu.o
 COBJS-y	+= cpu_init.o
diff --git a/arch/powerpc/cpu/mpc85xx/b4860_ids.c b/arch/powerpc/cpu/mpc85xx/b4860_ids.c
index 7d33731..0f4e82e 100644
--- a/arch/powerpc/cpu/mpc85xx/b4860_ids.c
+++ b/arch/powerpc/cpu/mpc85xx/b4860_ids.c
@@ -55,11 +55,13 @@ struct qportal_info qp_info[CONFIG_SYS_QMAN_NUM_PORTALS] = {
 };
 #endif
 
+#ifdef CONFIG_SYS_SRIO
 struct srio_liodn_id_table srio_liodn_tbl[] = {
 	SET_SRIO_LIODN_1(1, 307),
 	SET_SRIO_LIODN_1(2, 387),
 };
 int srio_liodn_tbl_sz = ARRAY_SIZE(srio_liodn_tbl);
+#endif
 
 struct liodn_id_table liodn_tbl[] = {
 #ifdef CONFIG_SYS_DPAA_QBMAN
@@ -76,10 +78,12 @@ struct liodn_id_table liodn_tbl[] = {
 	SET_DMA_LIODN(1, 147),
 	SET_DMA_LIODN(2, 227),
 
+#ifndef CONFIG_PPC_B4420
 	SET_GUTS_LIODN("fsl,rapidio-delta", 199, rio1liodnr, 0),
 	SET_GUTS_LIODN(NULL, 200, rio2liodnr, 0),
 	SET_GUTS_LIODN(NULL, 201, rio1maintliodnr, 0),
 	SET_GUTS_LIODN(NULL, 202, rio2maintliodnr, 0),
+#endif
 
 	/* SET_NEXUS_LIODN(557), -- not yet implemented */
 };
@@ -93,8 +97,10 @@ struct liodn_id_table fman1_liodn_tbl[] = {
 	SET_FMAN_RX_1G_LIODN(1, 3, 91),
 	SET_FMAN_RX_1G_LIODN(1, 4, 92),
 	SET_FMAN_RX_1G_LIODN(1, 5, 93),
+#ifndef CONFIG_PPC_B4420
 	SET_FMAN_RX_10G_LIODN(1, 0, 94),
 	SET_FMAN_RX_10G_LIODN(1, 1, 95),
+#endif
 };
 int fman1_liodn_tbl_sz = ARRAY_SIZE(fman1_liodn_tbl);
 #endif
diff --git a/arch/powerpc/cpu/mpc85xx/b4860_serdes.c b/arch/powerpc/cpu/mpc85xx/b4860_serdes.c
index 9990202..bd32342 100644
--- a/arch/powerpc/cpu/mpc85xx/b4860_serdes.c
+++ b/arch/powerpc/cpu/mpc85xx/b4860_serdes.c
@@ -31,6 +31,7 @@ struct serdes_config {
 	u8 lanes[SRDS_MAX_LANES];
 };
 
+#ifdef CONFIG_PPC_B4860
 static struct serdes_config serdes1_cfg_tbl[] = {
 	/* SerDes 1 */
 	{0x0D, {CPRI8, CPRI7, CPRI6, CPRI5,
@@ -41,6 +42,12 @@ static struct serdes_config serdes1_cfg_tbl[] = {
 		CPRI4, CPRI3, CPRI2, CPRI1}},
 	{0x2a, {SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6,
 		CPRI6, CPRI5, CPRI4, CPRI3, CPRI2, CPRI1}},
+	{0x2C, {SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6,
+		CPRI6, CPRI5, CPRI4, CPRI3, CPRI2, CPRI1}},
+	{0x2D, {SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6,
+		CPRI6, CPRI5, CPRI4, CPRI3, CPRI2, CPRI1}},
+	{0x2E, {SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6,
+		CPRI6, CPRI5, CPRI4, CPRI3, CPRI2, CPRI1}},
 	{0x30, {AURORA, AURORA,
 		SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4,
 		CPRI4, CPRI3, CPRI2, CPRI1}},
@@ -84,6 +91,8 @@ static struct serdes_config serdes2_cfg_tbl[] = {
 	{0x4E, {SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2,
 		SGMII_FM1_DTSEC3, AURORA,
 		SRIO1, SRIO1, SRIO1, SRIO1}},
+	{0x7A, {SRIO2, SRIO2, SRIO2, SRIO2,
+		SRIO1, SRIO1, SRIO1, SRIO1}},
 	{0x84, {SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2,
 		SRIO2, SRIO2, AURORA, AURORA,
 		XFI_FM1_MAC9, XFI_FM1_MAC10}},
@@ -94,6 +103,9 @@ static struct serdes_config serdes2_cfg_tbl[] = {
 		SRIO2, SRIO2,
 		SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4,
 		XFI_FM1_MAC9, XFI_FM1_MAC10}},
+	{0x8D, {SRIO2, SRIO2, SRIO2, SRIO2,
+		SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4,
+		XFI_FM1_MAC9, XFI_FM1_MAC10}},
 	{0x93, {SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2,
 		SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4,
 		XAUI_FM1_MAC10, XAUI_FM1_MAC10,
@@ -111,8 +123,56 @@ static struct serdes_config serdes2_cfg_tbl[] = {
 	{0xC3, {XAUI_FM1_MAC9, XAUI_FM1_MAC9,
 		XAUI_FM1_MAC9, XAUI_FM1_MAC9,
 		SRIO1, SRIO1, SRIO1, SRIO1}},
+	{0x98, {XAUI_FM1_MAC9, XAUI_FM1_MAC9,
+		XAUI_FM1_MAC9, XAUI_FM1_MAC9,
+		XAUI_FM1_MAC10, XAUI_FM1_MAC10,
+		XAUI_FM1_MAC10, XAUI_FM1_MAC10}},
 	{}
 };
+#endif
+
+#ifdef CONFIG_PPC_B4420
+static struct serdes_config serdes1_cfg_tbl[] = {
+	{0x0D, {NONE, NONE, CPRI6, CPRI5,
+		CPRI4, CPRI3, NONE, NONE} },
+	{0x0E, {NONE, NONE, CPRI8, CPRI5,
+		CPRI4, CPRI3, NONE, NONE} },
+	{0x0F, {NONE, NONE, CPRI6, CPRI5,
+		CPRI4, CPRI3, NONE, NONE} },
+	{0x18, {NONE, NONE,
+		SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4,
+		NONE, NONE, NONE, NONE} },
+	{0x1B, {NONE, NONE,
+		SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4,
+		NONE, NONE, NONE, NONE} },
+	{0x1E, {NONE, NONE, AURORA, AURORA,
+		NONE, NONE, NONE, NONE} },
+	{0x21, {NONE, NONE, AURORA, AURORA,
+		NONE, NONE, NONE, NONE} },
+	{0x3E, {NONE, NONE, CPRI6, CPRI5,
+		CPRI4, CPRI3, NONE, NONE} },
+	{}
+};
+static struct serdes_config serdes2_cfg_tbl[] = {
+	{0x49, {SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2,
+		SGMII_FM1_DTSEC3, AURORA,
+		NONE, NONE, NONE, NONE} },
+	{0x4A, {SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2,
+		SGMII_FM1_DTSEC3, AURORA,
+		NONE, NONE, NONE, NONE} },
+	{0x6F, {SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2,
+		AURORA, AURORA,	NONE, NONE, NONE, NONE} },
+	{0x70, {SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2,
+		AURORA, AURORA,	NONE, NONE, NONE, NONE} },
+	{0x9A, {PCIE1, PCIE1,
+		SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4,
+		NONE, NONE, NONE, NONE} },
+	{0x9E, {PCIE1, PCIE1, PCIE1, PCIE1,
+		NONE, NONE, NONE, NONE} },
+	{}
+};
+#endif
+
 static struct serdes_config *serdes_cfg_tbl[] = {
 	serdes1_cfg_tbl,
 	serdes2_cfg_tbl,
diff --git a/arch/powerpc/cpu/mpc85xx/bsc9132_serdes.c b/arch/powerpc/cpu/mpc85xx/bsc9132_serdes.c
new file mode 100644
index 0000000..300a4db
--- /dev/null
+++ b/arch/powerpc/cpu/mpc85xx/bsc9132_serdes.c
@@ -0,0 +1,96 @@
+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ * Author: Prabhakar Kushwaha <prabhakar@freescale.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ */
+
+#include <config.h>
+#include <common.h>
+#include <asm/io.h>
+#include <asm/immap_85xx.h>
+#include <asm/fsl_serdes.h>
+
+#define SRDS1_MAX_LANES		4
+
+static u32 serdes1_prtcl_map;
+
+static u8 serdes1_cfg_tbl[][SRDS1_MAX_LANES] = {
+	 [0] = {NONE, NONE, NONE, NONE},
+	 [1] = {PCIE1, PCIE2, CPRI2, CPRI1},
+	 [2] = {PCIE1, PCIE2, CPRI2, CPRI1},
+	 [3] = {PCIE1, PCIE2, CPRI2, CPRI1},
+	 [4] = {PCIE1, PCIE2, CPRI2, CPRI1},
+	 [5] = {PCIE1, PCIE2, CPRI2, CPRI1},
+	 [6] = {PCIE1, PCIE2, SGMII_TSEC1, CPRI1},
+	 [7] = {PCIE1, PCIE2, SGMII_TSEC1, CPRI1},
+	 [8] = {PCIE1, PCIE2, SGMII_TSEC1, CPRI1},
+	 [9] = {PCIE1, PCIE2, SGMII_TSEC1, CPRI1},
+	[10] = {PCIE1, PCIE2, SGMII_TSEC1, CPRI1},
+	[11] = {PCIE1, PCIE2, SGMII_TSEC1, SGMII_TSEC2},
+	[12] = {PCIE1, SGMII_TSEC2, CPRI2, CPRI1},
+	[13] = {PCIE1, SGMII_TSEC2, CPRI2, CPRI1},
+	[14] = {PCIE1, SGMII_TSEC2, CPRI2, CPRI1},
+	[15] = {PCIE1, SGMII_TSEC2, CPRI2, CPRI1},
+	[16] = {PCIE1, SGMII_TSEC2, CPRI2, CPRI1},
+	[17] = {PCIE1, SGMII_TSEC2, SGMII_TSEC1, CPRI1},
+	[18] = {PCIE1, SGMII_TSEC2, SGMII_TSEC1, CPRI1},
+	[19] = {PCIE1, SGMII_TSEC2, SGMII_TSEC1, CPRI1},
+	[20] = {PCIE1, SGMII_TSEC2, SGMII_TSEC1, CPRI1},
+	[21] = {PCIE1, SGMII_TSEC2, SGMII_TSEC1, CPRI1},
+	[22] = {PCIE1, PCIE2, CPRI2, CPRI1},
+	[23] = {PCIE1, PCIE2, CPRI2, CPRI1},
+	[24] = {PCIE1, PCIE2, CPRI2, CPRI1},
+	[25] = {PCIE1, PCIE2, CPRI2, CPRI1},
+	[26] = {PCIE1, PCIE2, CPRI2, CPRI1},
+	[27] = {PCIE1, PCIE2, SGMII_TSEC1, CPRI1},
+	[28] = {PCIE1, PCIE2, SGMII_TSEC1, CPRI1},
+	[29] = {PCIE1, PCIE2, SGMII_TSEC1, CPRI1},
+	[30] = {PCIE1, PCIE2, SGMII_TSEC1, CPRI1},
+	[31] = {PCIE1, PCIE2, SGMII_TSEC1, CPRI1},
+	[32] = {PCIE1, PCIE2, SGMII_TSEC1, SGMII_TSEC2},
+	[33] = {PCIE1, SGMII_TSEC2, CPRI2, CPRI1},
+	[34] = {PCIE1, SGMII_TSEC2, CPRI2, CPRI1},
+	[35] = {PCIE1, SGMII_TSEC2, CPRI2, CPRI1},
+	[36] = {PCIE1, SGMII_TSEC2, CPRI2, CPRI1},
+	[37] = {PCIE1, SGMII_TSEC2, CPRI2, CPRI1},
+	[38] = {PCIE1, SGMII_TSEC2, SGMII_TSEC1, CPRI1},
+	[39] = {PCIE1, SGMII_TSEC2, SGMII_TSEC1, CPRI1},
+	[40] = {PCIE1, SGMII_TSEC2, SGMII_TSEC1, CPRI1},
+	[41] = {PCIE1, SGMII_TSEC2, SGMII_TSEC1, CPRI1},
+	[42] = {PCIE1, SGMII_TSEC2, SGMII_TSEC1, CPRI1},
+	[43] = {SGMII_TSEC1, SGMII_TSEC2, CPRI2, CPRI1},
+	[44] = {SGMII_TSEC1, SGMII_TSEC2, CPRI2, CPRI1},
+	[45] = {SGMII_TSEC1, SGMII_TSEC2, CPRI2, CPRI1},
+	[46] = {SGMII_TSEC1, SGMII_TSEC2, CPRI2, CPRI1},
+	[47] = {SGMII_TSEC1, SGMII_TSEC2, CPRI2, CPRI1},
+};
+
+int is_serdes_configured(enum srds_prtcl prtcl)
+{
+	return (1 << prtcl) & serdes1_prtcl_map;
+}
+
+void fsl_serdes_init(void)
+{
+	ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+	u32 pordevsr = in_be32(&gur->pordevsr);
+	u32 srds_cfg = (pordevsr & MPC85xx_PORDEVSR_IO_SEL) >>
+				MPC85xx_PORDEVSR_IO_SEL_SHIFT;
+	int lane;
+
+	debug("PORDEVSR[IO_SEL_SRDS] = %x\n", srds_cfg);
+
+	if (srds_cfg >= ARRAY_SIZE(serdes1_cfg_tbl)) {
+		printf("Invalid PORDEVSR[IO_SEL_SRDS] = %d\n", srds_cfg);
+		return;
+	}
+
+	for (lane = 0; lane < SRDS1_MAX_LANES; lane++) {
+		enum srds_prtcl lane_prtcl = serdes1_cfg_tbl[srds_cfg][lane];
+		serdes1_prtcl_map |= (1 << lane_prtcl);
+	}
+}
diff --git a/arch/powerpc/cpu/mpc85xx/cmd_errata.c b/arch/powerpc/cpu/mpc85xx/cmd_errata.c
index e5ecf5d..5d72f4c 100644
--- a/arch/powerpc/cpu/mpc85xx/cmd_errata.c
+++ b/arch/powerpc/cpu/mpc85xx/cmd_errata.c
@@ -240,6 +240,10 @@ static int do_errata(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 #ifdef CONFIG_SYS_FSL_ERRATUM_A_004934
 	puts("Work-around for Erratum A004934 enabled\n");
 #endif
+#ifdef CONFIG_SYS_FSL_ERRATUM_A005871
+	if (IS_SVR_REV(svr, 1, 0))
+		puts("Work-around for Erratum A005871 enabled\n");
+#endif
 #ifdef CONFIG_SYS_FSL_ERRATUM_A004849
 	/* This work-around is implemented in PBI, so just check for it */
 	check_erratum_a4849(svr);
diff --git a/arch/powerpc/cpu/mpc85xx/commproc.c b/arch/powerpc/cpu/mpc85xx/commproc.c
index 292b723..37e7062 100644
--- a/arch/powerpc/cpu/mpc85xx/commproc.c
+++ b/arch/powerpc/cpu/mpc85xx/commproc.c
@@ -43,8 +43,8 @@ m8560_cpm_reset(void)
 
 	/* Reclaim the DP memory for our use.
 	*/
-	gd->dp_alloc_base = CPM_DATAONLY_BASE;
-	gd->dp_alloc_top = gd->dp_alloc_base + CPM_DATAONLY_SIZE;
+	gd->arch.dp_alloc_base = CPM_DATAONLY_BASE;
+	gd->arch.dp_alloc_top = gd->arch.dp_alloc_base + CPM_DATAONLY_SIZE;
 
 	/*
 	 * Reset CPM
@@ -69,21 +69,22 @@ m8560_cpm_dpalloc(uint size, uint align)
 	uint	savebase;
 
 	align_mask = align - 1;
-	savebase = gd->dp_alloc_base;
+	savebase = gd->arch.dp_alloc_base;
 
-	if ((off = (gd->dp_alloc_base & align_mask)) != 0)
-		gd->dp_alloc_base += (align - off);
+	off = gd->arch.dp_alloc_base & align_mask;
+	if (off != 0)
+		gd->arch.dp_alloc_base += (align - off);
 
 	if ((off = size & align_mask) != 0)
 		size += align - off;
 
-	if ((gd->dp_alloc_base + size) >= gd->dp_alloc_top) {
-		gd->dp_alloc_base = savebase;
+	if ((gd->arch.dp_alloc_base + size) >= gd->arch.dp_alloc_top) {
+		gd->arch.dp_alloc_base = savebase;
 		panic("m8560_cpm_dpalloc: ran out of dual port ram!");
 	}
 
-	retloc = gd->dp_alloc_base;
-	gd->dp_alloc_base += size;
+	retloc = gd->arch.dp_alloc_base;
+	gd->arch.dp_alloc_base += size;
 
 	memset((void *)&(cpm->im_dprambase[retloc]), 0, size);
 
@@ -110,7 +111,7 @@ m8560_cpm_hostalloc(uint size, uint align)
  * Baud rate clocks are zero-based in the driver code (as that maps
  * to port numbers).  Documentation uses 1-based numbering.
  */
-#define BRG_INT_CLK	gd->brg_clk
+#define BRG_INT_CLK	gd->arch.brg_clk
 #define BRG_UART_CLK	((BRG_INT_CLK + 15) / 16)
 
 /* This function is used by UARTS, or anything else that uses a 16x
diff --git a/arch/powerpc/cpu/mpc85xx/cpu.c b/arch/powerpc/cpu/mpc85xx/cpu.c
index 9b9832c..df2ab6d 100644
--- a/arch/powerpc/cpu/mpc85xx/cpu.c
+++ b/arch/powerpc/cpu/mpc85xx/cpu.c
@@ -104,7 +104,7 @@ int checkcpu (void)
 		puts("CPU:   ");
 	}
 
-	cpu = gd->cpu;
+	cpu = gd->arch.cpu;
 
 	puts(cpu->name);
 	if (IS_E_PROCESSOR(svr))
diff --git a/arch/powerpc/cpu/mpc85xx/cpu_init.c b/arch/powerpc/cpu/mpc85xx/cpu_init.c
index d1155e8..de9d916 100644
--- a/arch/powerpc/cpu/mpc85xx/cpu_init.c
+++ b/arch/powerpc/cpu/mpc85xx/cpu_init.c
@@ -312,19 +312,33 @@ int enable_cluster_l2(void)
 
 	/* Look through the remaining clusters, and set up their caches */
 	do {
+		int j, cluster_valid = 0;
+
 		l2cache = (void __iomem *)(CONFIG_SYS_FSL_CLUSTER_1_L2 + i * 0x40000);
+
 		cluster = in_be32(&gur->tp_cluster[i].lower);
 
-		/* set stash ID to (cluster) * 2 + 32 + 1 */
-		clrsetbits_be32(&l2cache->l2csr1, 0xff, 32 + i * 2 + 1);
+		/* check that at least one core/accel is enabled in cluster */
+		for (j = 0; j < 4; j++) {
+			u32 idx = (cluster >> (j*8)) & TP_CLUSTER_INIT_MASK;
+			u32 type = in_be32(&gur->tp_ityp[idx]);
+
+			if (type & TP_ITYP_AV)
+				cluster_valid = 1;
+		}
 
-		printf("enable l2 for cluster %d %p\n", i, l2cache);
+		if (cluster_valid) {
+			/* set stash ID to (cluster) * 2 + 32 + 1 */
+			clrsetbits_be32(&l2cache->l2csr1, 0xff, 32 + i * 2 + 1);
 
-		out_be32(&l2cache->l2csr0, L2CSR0_L2FI|L2CSR0_L2LFC);
-		while ((in_be32(&l2cache->l2csr0) &
-			(L2CSR0_L2FI|L2CSR0_L2LFC)) != 0)
-			;
-		out_be32(&l2cache->l2csr0, L2CSR0_L2E);
+			printf("enable l2 for cluster %d %p\n", i, l2cache);
+
+			out_be32(&l2cache->l2csr0, L2CSR0_L2FI|L2CSR0_L2LFC);
+			while ((in_be32(&l2cache->l2csr0)
+				& (L2CSR0_L2FI|L2CSR0_L2LFC)) != 0)
+					;
+			out_be32(&l2cache->l2csr0, L2CSR0_L2E);
+		}
 		i++;
 	} while (!(cluster & TP_CLUSTER_EOC));
 
@@ -534,6 +548,20 @@ skip_l2:
 	/* needs to be in ram since code uses global static vars */
 	fsl_serdes_init();
 
+#ifdef CONFIG_SYS_FSL_ERRATUM_A005871
+	if (IS_SVR_REV(svr, 1, 0)) {
+		int i;
+		__be32 *p = (void __iomem *)CONFIG_SYS_DCSRBAR + 0xb004c;
+
+		for (i = 0; i < 12; i++) {
+			p += i + (i > 5 ? 11 : 0);
+			out_be32(p, 0x2);
+		}
+		p = (void __iomem *)CONFIG_SYS_DCSRBAR + 0xb0108;
+		out_be32(p, 0x34);
+	}
+#endif
+
 #ifdef CONFIG_SYS_SRIO
 	srio_init();
 #ifdef CONFIG_SYS_FSL_SRIO_PCIE_BOOT_MASTER 
diff --git a/arch/powerpc/cpu/mpc85xx/fdt.c b/arch/powerpc/cpu/mpc85xx/fdt.c
index ab09330..d381cf9 100644
--- a/arch/powerpc/cpu/mpc85xx/fdt.c
+++ b/arch/powerpc/cpu/mpc85xx/fdt.c
@@ -100,6 +100,22 @@ void ft_fixup_cpu(void *blob, u64 memory_limit)
 			printf("Failed to reserve memory for bootpg: %s\n",
 				fdt_strerror(off));
 	}
+
+#ifndef CONFIG_MPC8xxx_DISABLE_BPTR
+	/*
+	 * Reserve the default boot page so OSes dont use it.
+	 * The default boot page is always mapped to bootpg above using
+	 * boot page translation.
+	 */
+	if (0xfffff000ull < memory_limit) {
+		off = fdt_add_mem_rsv(blob, 0xfffff000ull, (u64)4096);
+		if (off < 0) {
+			printf("Failed to reserve memory for 0xfffff000: %s\n",
+				fdt_strerror(off));
+		}
+	}
+#endif
+
 	/* Reserve spin table page */
 	if (spin_tbl_addr < memory_limit) {
 		off = fdt_add_mem_rsv(blob,
@@ -591,6 +607,14 @@ void ft_cpu_setup(void *blob, bd_t *bd)
 	/* delete crypto node if not on an E-processor */
 	if (!IS_E_PROCESSOR(get_svr()))
 		fdt_fixup_crypto_node(blob, 0);
+#if CONFIG_SYS_FSL_SEC_COMPAT >= 4
+	else {
+		ccsr_sec_t __iomem *sec;
+
+		sec = (void __iomem *)CONFIG_SYS_FSL_SEC_ADDR;
+		fdt_fixup_crypto_node(blob, in_be32(&sec->secvid_ms));
+	}
+#endif
 
 	fdt_fixup_ethernet(blob);
 
@@ -613,9 +637,9 @@ void ft_cpu_setup(void *blob, bd_t *bd)
 		"bus-frequency", bd->bi_busfreq, 1);
 
 	do_fixup_by_compat_u32(blob, "fsl,pq3-localbus",
-		"bus-frequency", gd->lbc_clk, 1);
+		"bus-frequency", gd->arch.lbc_clk, 1);
 	do_fixup_by_compat_u32(blob, "fsl,elbc",
-		"bus-frequency", gd->lbc_clk, 1);
+		"bus-frequency", gd->arch.lbc_clk, 1);
 #ifdef CONFIG_QE
 	ft_qe_setup(blob);
 	ft_fixup_qe_snum(blob);
diff --git a/arch/powerpc/cpu/mpc85xx/speed.c b/arch/powerpc/cpu/mpc85xx/speed.c
index 801ee07..297f2ed 100644
--- a/arch/powerpc/cpu/mpc85xx/speed.c
+++ b/arch/powerpc/cpu/mpc85xx/speed.c
@@ -391,11 +391,11 @@ int get_clocks (void)
 	gd->cpu_clk = sys_info.freqProcessor[0];
 	gd->bus_clk = sys_info.freqSystemBus;
 	gd->mem_clk = sys_info.freqDDRBus;
-	gd->lbc_clk = sys_info.freqLocalBus;
+	gd->arch.lbc_clk = sys_info.freqLocalBus;
 
 #ifdef CONFIG_QE
-	gd->qe_clk = sys_info.freqQE;
-	gd->brg_clk = gd->qe_clk / 2;
+	gd->arch.qe_clk = sys_info.freqQE;
+	gd->arch.brg_clk = gd->arch.qe_clk / 2;
 #endif
 	/*
 	 * The base clock for I2C depends on the actual SOC.  Unfortunately,
@@ -406,7 +406,7 @@ int get_clocks (void)
 	 */
 #if defined(CONFIG_MPC8540) || defined(CONFIG_MPC8541) || \
 	defined(CONFIG_MPC8560) || defined(CONFIG_MPC8555)
-	gd->i2c1_clk = sys_info.freqSystemBus;
+	gd->arch.i2c1_clk = sys_info.freqSystemBus;
 #elif defined(CONFIG_MPC8544)
 	/*
 	 * On the 8544, the I2C clock is the same as the SEC clock.  This can be
@@ -416,29 +416,29 @@ int get_clocks (void)
 	 * PORDEVSR2_SEC_CFG bit is 0 on all 85xx boards that are not an 8544.
 	 */
 	if (gur->pordevsr2 & MPC85xx_PORDEVSR2_SEC_CFG)
-		gd->i2c1_clk = sys_info.freqSystemBus / 3;
+		gd->arch.i2c1_clk = sys_info.freqSystemBus / 3;
 	else
-		gd->i2c1_clk = sys_info.freqSystemBus / 2;
+		gd->arch.i2c1_clk = sys_info.freqSystemBus / 2;
 #else
 	/* Most 85xx SOCs use CCB/2, so this is the default behavior. */
-	gd->i2c1_clk = sys_info.freqSystemBus / 2;
+	gd->arch.i2c1_clk = sys_info.freqSystemBus / 2;
 #endif
-	gd->i2c2_clk = gd->i2c1_clk;
+	gd->arch.i2c2_clk = gd->arch.i2c1_clk;
 
 #if defined(CONFIG_FSL_ESDHC)
 #if defined(CONFIG_MPC8569) || defined(CONFIG_P1010) ||\
        defined(CONFIG_P1014)
-	gd->sdhc_clk = gd->bus_clk;
+	gd->arch.sdhc_clk = gd->bus_clk;
 #else
-	gd->sdhc_clk = gd->bus_clk / 2;
+	gd->arch.sdhc_clk = gd->bus_clk / 2;
 #endif
 #endif /* defined(CONFIG_FSL_ESDHC) */
 
 #if defined(CONFIG_CPM2)
-	gd->vco_out = 2*sys_info.freqSystemBus;
-	gd->cpm_clk = gd->vco_out / 2;
-	gd->scc_clk = gd->vco_out / 4;
-	gd->brg_clk = gd->vco_out / (1 << (2 * (dfbrg + 1)));
+	gd->arch.vco_out = 2*sys_info.freqSystemBus;
+	gd->arch.cpm_clk = gd->arch.vco_out / 2;
+	gd->arch.scc_clk = gd->arch.vco_out / 4;
+	gd->arch.brg_clk = gd->arch.vco_out / (1 << (2 * (dfbrg + 1)));
 #endif
 
 	if(gd->cpu_clk != 0) return (0);
diff --git a/arch/powerpc/cpu/mpc85xx/start.S b/arch/powerpc/cpu/mpc85xx/start.S
index bb0dc1a..fb67469 100644
--- a/arch/powerpc/cpu/mpc85xx/start.S
+++ b/arch/powerpc/cpu/mpc85xx/start.S
@@ -449,7 +449,7 @@ nexti:	mflr	r1		/* R1 = our PC */
 
 	/* Set the size of the TLB to 4KB */
 	mfspr	r3, MAS1
-	li	r2, 0xF00
+	li	r2, 0xF80
 	andc	r3, r3, r2	/* Clear the TSIZE bits */
 	ori	r3, r3, MAS1_TSIZE(BOOKE_PAGESZ_4K)@l
 	oris	r3, r3, MAS1_IPROT@h
diff --git a/arch/powerpc/cpu/mpc85xx/tlb.c b/arch/powerpc/cpu/mpc85xx/tlb.c
index f44fadc..0dff37f 100644
--- a/arch/powerpc/cpu/mpc85xx/tlb.c
+++ b/arch/powerpc/cpu/mpc85xx/tlb.c
@@ -66,7 +66,7 @@ void read_tlbcam_entry(int idx, u32 *valid, u32 *tsize, unsigned long *epn,
 	_mas1 = mfspr(MAS1);
 
 	*valid = (_mas1 & MAS1_VALID);
-	*tsize = (_mas1 >> 8) & 0xf;
+	*tsize = (_mas1 >> 7) & 0x1f;
 	*epn = mfspr(MAS2) & MAS2_EPN;
 	*rpn = mfspr(MAS3) & MAS3_RPN;
 #ifdef CONFIG_ENABLE_36BIT_PHYS
@@ -99,7 +99,7 @@ static inline void use_tlb_cam(u8 idx)
 	int i = idx / 32;
 	int bit = idx % 32;
 
-	gd->used_tlb_cams[i] |= (1 << bit);
+	gd->arch.used_tlb_cams[i] |= (1 << bit);
 }
 
 static inline void free_tlb_cam(u8 idx)
@@ -107,7 +107,7 @@ static inline void free_tlb_cam(u8 idx)
 	int i = idx / 32;
 	int bit = idx % 32;
 
-	gd->used_tlb_cams[i] &= ~(1 << bit);
+	gd->arch.used_tlb_cams[i] &= ~(1 << bit);
 }
 
 void init_used_tlb_cams(void)
@@ -116,7 +116,7 @@ void init_used_tlb_cams(void)
 	unsigned int num_cam = mfspr(SPRN_TLB1CFG) & 0xfff;
 
 	for (i = 0; i < ((CONFIG_SYS_NUM_TLBCAMS+31)/32); i++)
-		gd->used_tlb_cams[i] = 0;
+		gd->arch.used_tlb_cams[i] = 0;
 
 	/* walk all the entries */
 	for (i = 0; i < num_cam; i++) {
@@ -133,7 +133,7 @@ int find_free_tlbcam(void)
 	u32 idx;
 
 	for (i = 0; i < ((CONFIG_SYS_NUM_TLBCAMS+31)/32); i++) {
-		idx = ffz(gd->used_tlb_cams[i]);
+		idx = ffz(gd->arch.used_tlb_cams[i]);
 
 		if (idx != 32)
 			break;
@@ -156,6 +156,13 @@ void set_tlb(u8 tlb, u32 epn, u64 rpn,
 	if (tlb == 1)
 		use_tlb_cam(esel);
 
+	if ((mfspr(SPRN_MMUCFG) & MMUCFG_MAVN) == MMUCFG_MAVN_V1 &&
+	    tsize & 1) {
+		printf("%s: bad tsize %d on entry %d at 0x%08x\n",
+			__func__, tsize, tlb, epn);
+		return;
+	}
+
 	_mas0 = FSL_BOOKE_MAS0(tlb, esel, 0);
 	_mas1 = FSL_BOOKE_MAS1(1, iprot, 0, ts, tsize);
 	_mas2 = FSL_BOOKE_MAS2(epn, wimge);
@@ -251,7 +258,7 @@ setup_ddr_tlbs_phys(phys_addr_t p_addr, unsigned int memsize_in_meg)
 	unsigned int tlb_size;
 	unsigned int wimge = MAS2_M;
 	unsigned int ram_tlb_address = (unsigned int)CONFIG_SYS_DDR_SDRAM_BASE;
-	unsigned int max_cam;
+	unsigned int max_cam, tsize_mask;
 	u64 size, memsize = (u64)memsize_in_meg << 20;
 
 #ifdef CONFIG_SYS_PPC_DDR_WIMGE
@@ -261,15 +268,17 @@ setup_ddr_tlbs_phys(phys_addr_t p_addr, unsigned int memsize_in_meg)
 	if ((mfspr(SPRN_MMUCFG) & MMUCFG_MAVN) == MMUCFG_MAVN_V1) {
 		/* Convert (4^max) kB to (2^max) bytes */
 		max_cam = ((mfspr(SPRN_TLB1CFG) >> 16) & 0xf) * 2 + 10;
+		tsize_mask = ~1U;
 	} else {
 		/* Convert (2^max) kB to (2^max) bytes */
 		max_cam = __ilog2(mfspr(SPRN_TLB1PS)) + 10;
+		tsize_mask = ~0U;
 	}
 
 	for (i = 0; size && i < 8; i++) {
 		int ram_tlb_index = find_free_tlbcam();
-		u32 camsize = __ilog2_u64(size) & ~1U;
-		u32 align = __ilog2(ram_tlb_address) & ~1U;
+		u32 camsize = __ilog2_u64(size) & tsize_mask;
+		u32 align = __ilog2(ram_tlb_address) & tsize_mask;
 
 		if (ram_tlb_index == -1)
 			break;
@@ -281,7 +290,7 @@ setup_ddr_tlbs_phys(phys_addr_t p_addr, unsigned int memsize_in_meg)
 		if (camsize > max_cam)
 			camsize = max_cam;
 
-		tlb_size = (camsize - 10) / 2;
+		tlb_size = camsize - 10;
 
 		set_tlb(1, ram_tlb_address, p_addr,
 			MAS3_SX|MAS3_SW|MAS3_SR, wimge,
diff --git a/arch/powerpc/cpu/mpc86xx/cpu.c b/arch/powerpc/cpu/mpc86xx/cpu.c
index d2c8c78..c553415 100644
--- a/arch/powerpc/cpu/mpc86xx/cpu.c
+++ b/arch/powerpc/cpu/mpc86xx/cpu.c
@@ -67,7 +67,7 @@ checkcpu(void)
 	}
 	puts("CPU:   ");
 
-	cpu = gd->cpu;
+	cpu = gd->arch.cpu;
 
 	puts(cpu->name);
 
diff --git a/arch/powerpc/cpu/mpc86xx/fdt.c b/arch/powerpc/cpu/mpc86xx/fdt.c
index 2f955fe..26a65c5 100644
--- a/arch/powerpc/cpu/mpc86xx/fdt.c
+++ b/arch/powerpc/cpu/mpc86xx/fdt.c
@@ -34,10 +34,10 @@ void ft_cpu_setup(void *blob, bd_t *bd)
 
 #if defined(CONFIG_MPC8641)
 	do_fixup_by_compat_u32(blob, "fsl,mpc8641-localbus",
-			       "bus-frequency", gd->lbc_clk, 1);
+			       "bus-frequency", gd->arch.lbc_clk, 1);
 #endif
 	do_fixup_by_compat_u32(blob, "fsl,elbc",
-			       "bus-frequency", gd->lbc_clk, 1);
+			       "bus-frequency", gd->arch.lbc_clk, 1);
 
 	fdt_fixup_memory(blob, (u64)bd->bi_memstart, (u64)bd->bi_memsize);
 
diff --git a/arch/powerpc/cpu/mpc86xx/speed.c b/arch/powerpc/cpu/mpc86xx/speed.c
index a2d0a8a..18c1eea 100644
--- a/arch/powerpc/cpu/mpc86xx/speed.c
+++ b/arch/powerpc/cpu/mpc86xx/speed.c
@@ -120,7 +120,7 @@ int get_clocks(void)
 	get_sys_info(&sys_info);
 	gd->cpu_clk = sys_info.freqProcessor;
 	gd->bus_clk = sys_info.freqSystemBus;
-	gd->lbc_clk = sys_info.freqLocalBus;
+	gd->arch.lbc_clk = sys_info.freqLocalBus;
 
 	/*
 	 * The base clock for I2C depends on the actual SOC.  Unfortunately,
@@ -130,11 +130,11 @@ int get_clocks(void)
 	 * AN2919.
 	 */
 #ifdef CONFIG_MPC8610
-	gd->i2c1_clk = sys_info.freqSystemBus;
+	gd->arch.i2c1_clk = sys_info.freqSystemBus;
 #else
-	gd->i2c1_clk = sys_info.freqSystemBus / 2;
+	gd->arch.i2c1_clk = sys_info.freqSystemBus / 2;
 #endif
-	gd->i2c2_clk = gd->i2c1_clk;
+	gd->arch.i2c2_clk = gd->arch.i2c1_clk;
 
 	if (gd->cpu_clk != 0)
 		return 0;
diff --git a/arch/powerpc/cpu/mpc8xx/commproc.c b/arch/powerpc/cpu/mpc8xx/commproc.c
index 5fe01ff..a364782 100644
--- a/arch/powerpc/cpu/mpc8xx/commproc.c
+++ b/arch/powerpc/cpu/mpc8xx/commproc.c
@@ -31,8 +31,8 @@ DECLARE_GLOBAL_DATA_PTR;
 int dpram_init (void)
 {
 	/* Reclaim the DP memory for our use. */
-	gd->dp_alloc_base = CPM_DATAONLY_BASE;
-	gd->dp_alloc_top  = CPM_DATAONLY_BASE + CPM_DATAONLY_SIZE;
+	gd->arch.dp_alloc_base = CPM_DATAONLY_BASE;
+	gd->arch.dp_alloc_top  = CPM_DATAONLY_BASE + CPM_DATAONLY_SIZE;
 
 	return (0);
 }
@@ -43,19 +43,19 @@ int dpram_init (void)
  */
 uint dpram_alloc (uint size)
 {
-	uint addr = gd->dp_alloc_base;
+	uint addr = gd->arch.dp_alloc_base;
 
-	if ((gd->dp_alloc_base + size) >= gd->dp_alloc_top)
+	if ((gd->arch.dp_alloc_base + size) >= gd->arch.dp_alloc_top)
 		return (CPM_DP_NOSPACE);
 
-	gd->dp_alloc_base += size;
+	gd->arch.dp_alloc_base += size;
 
 	return addr;
 }
 
 uint dpram_base (void)
 {
-	return gd->dp_alloc_base;
+	return gd->arch.dp_alloc_base;
 }
 
 /* Allocate some memory from the dual ported ram.  We may want to
@@ -66,12 +66,12 @@ uint dpram_alloc_align (uint size, uint align)
 {
 	uint addr, mask = align - 1;
 
-	addr = (gd->dp_alloc_base + mask) & ~mask;
+	addr = (gd->arch.dp_alloc_base + mask) & ~mask;
 
-	if ((addr + size) >= gd->dp_alloc_top)
+	if ((addr + size) >= gd->arch.dp_alloc_top)
 		return (CPM_DP_NOSPACE);
 
-	gd->dp_alloc_base = addr + size;
+	gd->arch.dp_alloc_base = addr + size;
 
 	return addr;
 }
@@ -80,6 +80,6 @@ uint dpram_base_align (uint align)
 {
 	uint mask = align - 1;
 
-	return (gd->dp_alloc_base + mask) & ~mask;
+	return (gd->arch.dp_alloc_base + mask) & ~mask;
 }
 #endif	/* CONFIG_SYS_ALLOC_DPRAM */
diff --git a/arch/powerpc/cpu/mpc8xx/fdt.c b/arch/powerpc/cpu/mpc8xx/fdt.c
index 7130983..7edd7e4 100644
--- a/arch/powerpc/cpu/mpc8xx/fdt.c
+++ b/arch/powerpc/cpu/mpc8xx/fdt.c
@@ -37,7 +37,7 @@ void ft_cpu_setup(void *blob, bd_t *bd)
 	do_fixup_by_prop_u32(blob, "device_type", "cpu", 4,
 		"clock-frequency", bd->bi_intfreq, 1);
 	do_fixup_by_compat_u32(blob, "fsl,cpm-brg", "clock-frequency",
-		gd->brg_clk, 1);
+		gd->arch.brg_clk, 1);
 
 	/* Fixup ethernet MAC addresses */
 	fdt_fixup_ethernet(blob);
diff --git a/arch/powerpc/cpu/mpc8xx/speed.c b/arch/powerpc/cpu/mpc8xx/speed.c
index 6e13e5d..091b49f 100644
--- a/arch/powerpc/cpu/mpc8xx/speed.c
+++ b/arch/powerpc/cpu/mpc8xx/speed.c
@@ -192,7 +192,7 @@ void get_brgclk(uint sccr)
 			divider = 64;
 			break;
 	}
-	gd->brg_clk = gd->cpu_clk/divider;
+	gd->arch.brg_clk = gd->cpu_clk/divider;
 }
 
 #if !defined(CONFIG_8xx_CPUCLK_DEFAULT)
diff --git a/arch/powerpc/cpu/mpc8xxx/cpu.c b/arch/powerpc/cpu/mpc8xxx/cpu.c
index e8613be..39525fb 100644
--- a/arch/powerpc/cpu/mpc8xxx/cpu.c
+++ b/arch/powerpc/cpu/mpc8xxx/cpu.c
@@ -86,6 +86,8 @@ static struct cpu_type cpu_type_list[] = {
 	CPU_TYPE_ENTRY(B4220, B4220, 0),
 	CPU_TYPE_ENTRY(BSC9130, 9130, 1),
 	CPU_TYPE_ENTRY(BSC9131, 9131, 1),
+	CPU_TYPE_ENTRY(BSC9132, 9132, 2),
+	CPU_TYPE_ENTRY(BSC9232, 9232, 2),
 #elif defined(CONFIG_MPC86xx)
 	CPU_TYPE_ENTRY(8610, 8610, 1),
 	CPU_TYPE_ENTRY(8641, 8641, 2),
@@ -146,7 +148,7 @@ struct cpu_type *identify_cpu(u32 ver)
 u32 cpu_mask(void)
 {
 	ccsr_pic_t __iomem *pic = (void *)CONFIG_SYS_MPC8xxx_PIC_ADDR;
-	struct cpu_type *cpu = gd->cpu;
+	struct cpu_type *cpu = gd->arch.cpu;
 
 	/* better to query feature reporting register than just assume 1 */
 	if (cpu == &cpu_type_unknown)
@@ -164,7 +166,7 @@ u32 cpu_mask(void)
  */
 int cpu_numcores(void)
 {
-	struct cpu_type *cpu = gd->cpu;
+	struct cpu_type *cpu = gd->arch.cpu;
 
 	/*
 	 * Report # of cores in terms of the cpu_mask if we haven't
@@ -194,7 +196,7 @@ int probecpu (void)
 	svr = get_svr();
 	ver = SVR_SOC_VER(svr);
 
-	gd->cpu = identify_cpu(ver);
+	gd->arch.cpu = identify_cpu(ver);
 
 	return 0;
 }
@@ -202,7 +204,7 @@ int probecpu (void)
 /* Once in memory, compute mask & # cores once and save them off */
 int fixup_cpu(void)
 {
-	struct cpu_type *cpu = gd->cpu;
+	struct cpu_type *cpu = gd->arch.cpu;
 
 	if (cpu->num_cores == 0) {
 		cpu->mask = cpu_mask();
diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/ctrl_regs.c b/arch/powerpc/cpu/mpc8xxx/ddr/ctrl_regs.c
index 8016bcd..26c42f7 100644
--- a/arch/powerpc/cpu/mpc8xxx/ddr/ctrl_regs.c
+++ b/arch/powerpc/cpu/mpc8xxx/ddr/ctrl_regs.c
@@ -1190,7 +1190,11 @@ static void set_ddr_data_init(fsl_ddr_cfg_regs_t *ddr)
 {
 	unsigned int init_value;	/* Initialization value */
 
+#ifdef CONFIG_MEM_INIT_VALUE
+	init_value = CONFIG_MEM_INIT_VALUE;
+#else
 	init_value = 0xDEADBEEF;
+#endif
 	ddr->ddr_data_init = init_value;
 }
 
diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/ddr.h b/arch/powerpc/cpu/mpc8xxx/ddr/ddr.h
index c8b0f91..4dd55fc 100644
--- a/arch/powerpc/cpu/mpc8xxx/ddr/ddr.h
+++ b/arch/powerpc/cpu/mpc8xxx/ddr/ddr.h
@@ -86,7 +86,8 @@ void fsl_ddr_set_lawbar(
 		unsigned int memctl_interleaved,
 		unsigned int ctrl_num);
 
-unsigned long long fsl_ddr_interactive(fsl_ddr_info_t *pinfo);
+int fsl_ddr_interactive_env_var_exists(void);
+unsigned long long fsl_ddr_interactive(fsl_ddr_info_t *pinfo, int var_is_set);
 void fsl_ddr_get_spd(generic_spd_eeprom_t *ctrl_dimms_spd,
 			   unsigned int ctrl_num);
 
diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/interactive.c b/arch/powerpc/cpu/mpc8xxx/ddr/interactive.c
index cb71f94..46257c9 100644
--- a/arch/powerpc/cpu/mpc8xxx/ddr/interactive.c
+++ b/arch/powerpc/cpu/mpc8xxx/ddr/interactive.c
@@ -1369,14 +1369,15 @@ struct data_strings {
 
 #define DATA_OPTIONS(name, step, dimm) {#name, step, dimm}
 
-unsigned long long fsl_ddr_interactive(fsl_ddr_info_t *pinfo)
-{
-	unsigned long long ddrsize;
-	const char *prompt = "FSL DDR>";
-	char buffer[CONFIG_SYS_CBSIZE];
-	char *argv[CONFIG_SYS_MAXARGS + 1];	/* NULL terminated */
-	int argc;
-	unsigned int next_step = STEP_GET_SPD;
+static unsigned int fsl_ddr_parse_interactive_cmd(
+	char **argv,
+	int argc,
+	unsigned int *pstep_mask,
+	unsigned int *pctlr_mask,
+	unsigned int *pdimm_mask,
+	unsigned int *pdimm_number_required
+	 ) {
+
 	static const struct data_strings options[] = {
 		DATA_OPTIONS(spd, STEP_GET_SPD, 1),
 		DATA_OPTIONS(dimmparms, STEP_COMPUTE_DIMM_PARMS, 1),
@@ -1386,6 +1387,69 @@ unsigned long long fsl_ddr_interactive(fsl_ddr_info_t *pinfo)
 		DATA_OPTIONS(regs, STEP_COMPUTE_REGS, 0),
 	};
 	static const unsigned int n_opts = ARRAY_SIZE(options);
+
+	unsigned int i, j;
+	unsigned int error = 0;
+
+	for (i = 1; i < argc; i++) {
+		unsigned int matched = 0;
+
+		for (j = 0; j < n_opts; j++) {
+			if (strcmp(options[j].data_name, argv[i]) != 0)
+				continue;
+			*pstep_mask |= options[j].step_mask;
+			*pdimm_number_required =
+				options[j].dimm_number_required;
+			matched = 1;
+			break;
+		}
+
+		if (matched)
+			continue;
+
+		if (argv[i][0] == 'c') {
+			char c = argv[i][1];
+			if (isdigit(c))
+				*pctlr_mask |= 1 << (c - '0');
+			continue;
+		}
+
+		if (argv[i][0] == 'd') {
+			char c = argv[i][1];
+			if (isdigit(c))
+				*pdimm_mask |= 1 << (c - '0');
+			continue;
+		}
+
+		printf("unknown arg %s\n", argv[i]);
+		*pstep_mask = 0;
+		error = 1;
+		break;
+	}
+
+	return error;
+}
+
+int fsl_ddr_interactive_env_var_exists(void)
+{
+	char buffer[CONFIG_SYS_CBSIZE];
+
+	if (getenv_f("ddr_interactive", buffer, CONFIG_SYS_CBSIZE) >= 0)
+		return 1;
+
+	return 0;
+}
+
+unsigned long long fsl_ddr_interactive(fsl_ddr_info_t *pinfo, int var_is_set)
+{
+	unsigned long long ddrsize;
+	const char *prompt = "FSL DDR>";
+	char buffer[CONFIG_SYS_CBSIZE];
+	char buffer2[CONFIG_SYS_CBSIZE];
+	char *p = NULL;
+	char *argv[CONFIG_SYS_MAXARGS + 1];	/* NULL terminated */
+	int argc;
+	unsigned int next_step = STEP_GET_SPD;
 	const char *usage = {
 		"commands:\n"
 		"print      print SPD and intermediate computed data\n"
@@ -1393,21 +1457,45 @@ unsigned long long fsl_ddr_interactive(fsl_ddr_info_t *pinfo)
 		"recompute  reload SPD and options to default and recompute regs\n"
 		"edit       modify spd, parameter, or option\n"
 		"compute    recompute registers from current next_step to end\n"
+		"copy       copy parameters\n"
 		"next_step  shows current next_step\n"
 		"help       this message\n"
 		"go         program the memory controller and continue with u-boot\n"
 	};
 
+	if (var_is_set) {
+		if (getenv_f("ddr_interactive", buffer2, CONFIG_SYS_CBSIZE) > 0) {
+			p = buffer2;
+		} else {
+			var_is_set = 0;
+		}
+	}
+
 	/*
 	 * The strategy for next_step is that it points to the next
 	 * step in the computation process that needs to be done.
 	 */
 	while (1) {
-		/*
-		 * No need to worry for buffer overflow here in
-		 * this function;  readline() maxes out at CFG_CBSIZE
-		 */
-		readline_into_buffer(prompt, buffer, 0);
+		if (var_is_set) {
+			char *pend = strchr(p, ';');
+			if (pend) {
+				/* found command separator, copy sub-command */
+				*pend = '\0';
+				strcpy(buffer, p);
+				p = pend + 1;
+			} else {
+				/* separator not found, copy whole string */
+				strcpy(buffer, p);
+				p = NULL;
+				var_is_set = 0;
+			}
+		} else {
+			/*
+			 * No need to worry for buffer overflow here in
+			 * this function;  readline() maxes out at CFG_CBSIZE
+			 */
+			readline_into_buffer(prompt, buffer, 0);
+		}
 		argc = parse_line(buffer, argv);
 		if (argc == 0)
 			continue;
@@ -1425,64 +1513,160 @@ unsigned long long fsl_ddr_interactive(fsl_ddr_info_t *pinfo)
 			continue;
 		}
 
-		if (strcmp(argv[0], "edit") == 0) {
-			unsigned int i, j;
+		if (strcmp(argv[0], "copy") == 0) {
 			unsigned int error = 0;
 			unsigned int step_mask = 0;
-			unsigned int ctlr_mask = 0;
-			unsigned int dimm_mask = 0;
-			char *p_element = NULL;
-			char *p_value = NULL;
+			unsigned int src_ctlr_mask = 0;
+			unsigned int src_dimm_mask = 0;
 			unsigned int dimm_number_required = 0;
-			unsigned int ctrl_num;
-			unsigned int dimm_num;
-			unsigned int matched = 0;
+			unsigned int src_ctlr_num = 0;
+			unsigned int src_dimm_num = 0;
+			unsigned int dst_ctlr_num = -1;
+			unsigned int dst_dimm_num = -1;
+			unsigned int i, num_dest_parms;
 
 			if (argc == 1) {
-				/* Only the element and value must be last */
-				printf("edit <c#> <d#> "
-					"<spd|dimmparms|commonparms|opts|"
-					"addresses|regs> <element> <value>\n");
-				printf("for spd, specify byte number for "
-					"element\n");
+				printf("copy <src c#> <src d#> <spd|dimmparms|commonparms|opts|addresses|regs> <dst c#> <dst d#>\n");
 				continue;
 			}
 
-			for (i = 1; i < argc - 2; i++) {
-				for (j = 0; j < n_opts; j++) {
-					if (strcmp(options[j].data_name,
-						argv[i]) != 0)
-						continue;
-					step_mask |= options[j].step_mask;
-					dimm_number_required =
-						options[j].dimm_number_required;
-					matched = 1;
-					break;
+			error = fsl_ddr_parse_interactive_cmd(
+				argv, argc,
+				&step_mask,
+				&src_ctlr_mask,
+				&src_dimm_mask,
+				&dimm_number_required
+			);
+
+			/* XXX: only dimm_number_required and step_mask will
+			   be used by this function.  Parse the controller and
+			   DIMM number separately because it is easier.  */
+
+			if (error)
+				continue;
+
+			/* parse source destination controller / DIMM */
+
+			num_dest_parms = dimm_number_required ? 2 : 1;
+
+			for (i = 0; i < argc; i++) {
+				if (argv[i][0] == 'c') {
+					char c = argv[i][1];
+					if (isdigit(c)) {
+						src_ctlr_num = (c - '0');
+						break;
+					}
 				}
+			}
 
-				if (matched)
-					continue;
+			for (i = 0; i < argc; i++) {
+				if (argv[i][0] == 'd') {
+					char c = argv[i][1];
+					if (isdigit(c)) {
+						src_dimm_num = (c - '0');
+						break;
+					}
+				}
+			}
+
+			/* parse destination controller / DIMM */
 
+			for (i = argc - 1; i >= argc - num_dest_parms; i--) {
 				if (argv[i][0] == 'c') {
 					char c = argv[i][1];
-					if (isdigit(c))
-						ctlr_mask |= 1 << (c - '0');
-					continue;
+					if (isdigit(c)) {
+						dst_ctlr_num = (c - '0');
+						break;
+					}
 				}
+			}
 
+			for (i = argc - 1; i >= argc - num_dest_parms; i--) {
 				if (argv[i][0] == 'd') {
 					char c = argv[i][1];
-					if (isdigit(c))
-						dimm_mask |= 1 << (c - '0');
-					continue;
+					if (isdigit(c)) {
+						dst_dimm_num = (c - '0');
+						break;
+					}
 				}
+			}
+
+			/* TODO: validate inputs */
+
+			debug("src_ctlr_num = %u, src_dimm_num = %u, dst_ctlr_num = %u, dst_dimm_num = %u, step_mask = %x\n",
+				src_ctlr_num, src_dimm_num, dst_ctlr_num, dst_dimm_num, step_mask);
 
-				printf("unknown arg %s\n", argv[i]);
-				step_mask = 0;
-				error = 1;
+
+			switch (step_mask) {
+
+			case STEP_GET_SPD:
+				memcpy(&(pinfo->spd_installed_dimms[dst_ctlr_num][dst_dimm_num]),
+					&(pinfo->spd_installed_dimms[src_ctlr_num][src_dimm_num]),
+					sizeof(pinfo->spd_installed_dimms[0][0]));
 				break;
+
+			case STEP_COMPUTE_DIMM_PARMS:
+				memcpy(&(pinfo->dimm_params[dst_ctlr_num][dst_dimm_num]),
+					&(pinfo->dimm_params[src_ctlr_num][src_dimm_num]),
+					sizeof(pinfo->dimm_params[0][0]));
+				break;
+
+			case STEP_COMPUTE_COMMON_PARMS:
+				memcpy(&(pinfo->common_timing_params[dst_ctlr_num]),
+					&(pinfo->common_timing_params[src_ctlr_num]),
+					sizeof(pinfo->common_timing_params[0]));
+				break;
+
+			case STEP_GATHER_OPTS:
+				memcpy(&(pinfo->memctl_opts[dst_ctlr_num]),
+					&(pinfo->memctl_opts[src_ctlr_num]),
+					sizeof(pinfo->memctl_opts[0]));
+				break;
+
+			/* someday be able to have addresses to copy addresses... */
+
+			case STEP_COMPUTE_REGS:
+				memcpy(&(pinfo->fsl_ddr_config_reg[dst_ctlr_num]),
+					&(pinfo->fsl_ddr_config_reg[src_ctlr_num]),
+					sizeof(pinfo->memctl_opts[0]));
+				break;
+
+			default:
+				printf("unexpected step_mask value\n");
+			}
+
+			continue;
+
+		}
+
+		if (strcmp(argv[0], "edit") == 0) {
+			unsigned int error = 0;
+			unsigned int step_mask = 0;
+			unsigned int ctlr_mask = 0;
+			unsigned int dimm_mask = 0;
+			char *p_element = NULL;
+			char *p_value = NULL;
+			unsigned int dimm_number_required = 0;
+			unsigned int ctrl_num;
+			unsigned int dimm_num;
+
+			if (argc == 1) {
+				/* Only the element and value must be last */
+				printf("edit <c#> <d#> "
+					"<spd|dimmparms|commonparms|opts|"
+					"addresses|regs> <element> <value>\n");
+				printf("for spd, specify byte number for "
+					"element\n");
+				continue;
 			}
 
+			error = fsl_ddr_parse_interactive_cmd(
+				argv, argc - 2,
+				&step_mask,
+				&ctlr_mask,
+				&dimm_mask,
+				&dimm_number_required
+			);
 
 			if (error)
 				continue;
@@ -1629,12 +1813,11 @@ unsigned long long fsl_ddr_interactive(fsl_ddr_info_t *pinfo)
 		}
 
 		if (strcmp(argv[0], "print") == 0) {
-			unsigned int i, j;
 			unsigned int error = 0;
 			unsigned int step_mask = 0;
 			unsigned int ctlr_mask = 0;
 			unsigned int dimm_mask = 0;
-			unsigned int matched = 0;
+			unsigned int dimm_number_required = 0;
 
 			if (argc == 1) {
 				printf("print [c<n>] [d<n>] [spd] [dimmparms] "
@@ -1642,38 +1825,13 @@ unsigned long long fsl_ddr_interactive(fsl_ddr_info_t *pinfo)
 				continue;
 			}
 
-			for (i = 1; i < argc; i++) {
-				for (j = 0; j < n_opts; j++) {
-					if (strcmp(options[j].data_name,
-						argv[i]) != 0)
-						continue;
-					step_mask |= options[j].step_mask;
-					matched = 1;
-					break;
-				}
-
-				if (matched)
-					continue;
-
-				if (argv[i][0] == 'c') {
-					char c = argv[i][1];
-					if (isdigit(c))
-						ctlr_mask |= 1 << (c - '0');
-					continue;
-				}
-
-				if (argv[i][0] == 'd') {
-					char c = argv[i][1];
-					if (isdigit(c))
-						dimm_mask |= 1 << (c - '0');
-					continue;
-				}
-
-				printf("unknown arg %s\n", argv[i]);
-				step_mask = 0;
-				error = 1;
-				break;
-			}
+			error = fsl_ddr_parse_interactive_cmd(
+				argv, argc,
+				&step_mask,
+				&ctlr_mask,
+				&dimm_mask,
+				&dimm_number_required
+			);
 
 			if (error)
 				continue;
diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/main.c b/arch/powerpc/cpu/mpc8xxx/ddr/main.c
index d6b73c7..5311a26 100644
--- a/arch/powerpc/cpu/mpc8xxx/ddr/main.c
+++ b/arch/powerpc/cpu/mpc8xxx/ddr/main.c
@@ -532,9 +532,11 @@ phys_size_t fsl_ddr_sdram(void)
 
 	/* Compute it once normally. */
 #ifdef CONFIG_FSL_DDR_INTERACTIVE
-	if (getenv("ddr_interactive"))
-		total_memory = fsl_ddr_interactive(&info);
-	else
+	if (tstc() && (getc() == 'd')) {	/* we got a key press of 'd' */
+		total_memory = fsl_ddr_interactive(&info, 0);
+	} else if (fsl_ddr_interactive_env_var_exists()) {
+		total_memory = fsl_ddr_interactive(&info, 1);
+	} else
 #endif
 		total_memory = fsl_ddr_compute(&info, STEP_GET_SPD, 0);
 
diff --git a/arch/powerpc/cpu/mpc8xxx/fdt.c b/arch/powerpc/cpu/mpc8xxx/fdt.c
index 1986fea..2847094 100644
--- a/arch/powerpc/cpu/mpc8xxx/fdt.c
+++ b/arch/powerpc/cpu/mpc8xxx/fdt.c
@@ -297,10 +297,86 @@ void fdt_fixup_crypto_node(void *blob, int sec_rev)
 		       fdt_strerror(err));
 }
 #elif CONFIG_SYS_FSL_SEC_COMPAT >= 4  /* SEC4 */
+static u8 caam_get_era(void)
+{
+	static const struct {
+		u16 ip_id;
+		u8 maj_rev;
+		u8 era;
+	} caam_eras[] = {
+		{0x0A10, 1, 1},
+		{0x0A10, 2, 2},
+		{0x0A12, 1, 3},
+		{0x0A14, 1, 3},
+		{0x0A14, 2, 4},
+		{0x0A16, 1, 4},
+		{0x0A10, 3, 4},
+		{0x0A11, 1, 4},
+		{0x0A18, 1, 4},
+		{0x0A11, 2, 5},
+		{0x0A12, 2, 5},
+		{0x0A13, 1, 5},
+		{0x0A1C, 1, 5}
+	};
+
+	ccsr_sec_t __iomem *sec = (void __iomem *)CONFIG_SYS_FSL_SEC_ADDR;
+	u32 secvid_ms = in_be32(&sec->secvid_ms);
+	u32 ccbvid = in_be32(&sec->ccbvid);
+	u16 ip_id = (secvid_ms & SEC_SECVID_MS_IPID_MASK) >>
+				SEC_SECVID_MS_IPID_SHIFT;
+	u8 maj_rev = (secvid_ms & SEC_SECVID_MS_MAJ_REV_MASK) >>
+				SEC_SECVID_MS_MAJ_REV_SHIFT;
+	u8 era = (ccbvid & SEC_CCBVID_ERA_MASK) >> SEC_CCBVID_ERA_SHIFT;
+
+	int i;
+
+	if (era)	/* This is '0' prior to CAAM ERA-6 */
+		return era;
+
+	for (i = 0; i < ARRAY_SIZE(caam_eras); i++)
+		if (caam_eras[i].ip_id == ip_id &&
+		    caam_eras[i].maj_rev == maj_rev)
+			return caam_eras[i].era;
+
+	return 0;
+}
+
+static void fdt_fixup_crypto_era(void *blob, u32 era)
+{
+	int err;
+	int crypto_node;
+
+	crypto_node = fdt_path_offset(blob, "crypto");
+	if (crypto_node < 0) {
+		printf("WARNING: Missing crypto node\n");
+		return;
+	}
+
+	err = fdt_setprop(blob, crypto_node, "fsl,sec-era", &era,
+			  sizeof(era));
+	if (err < 0) {
+		printf("ERROR: could not set fsl,sec-era property: %s\n",
+		       fdt_strerror(err));
+	}
+}
+
 void fdt_fixup_crypto_node(void *blob, int sec_rev)
 {
-	if (!sec_rev)
+	u8 era;
+
+	if (!sec_rev) {
 		fdt_del_node_and_alias(blob, "crypto");
+		return;
+	}
+
+	/* Add SEC ERA information in compatible */
+	era = caam_get_era();
+	if (era) {
+		fdt_fixup_crypto_era(blob, era);
+	} else {
+		printf("WARNING: Unable to get ERA for CAAM rev: %d\n",
+			sec_rev);
+	}
 }
 #endif
 
diff --git a/arch/powerpc/cpu/mpc8xxx/law.c b/arch/powerpc/cpu/mpc8xxx/law.c
index ce1d71e..6f9d568 100644
--- a/arch/powerpc/cpu/mpc8xxx/law.c
+++ b/arch/powerpc/cpu/mpc8xxx/law.c
@@ -69,7 +69,7 @@ static inline void set_law_base_addr(int idx, phys_addr_t addr)
 
 void set_law(u8 idx, phys_addr_t addr, enum law_size sz, enum law_trgt_if id)
 {
-	gd->used_laws |= (1 << idx);
+	gd->arch.used_laws |= (1 << idx);
 
 	out_be32(LAWAR_ADDR(idx), 0);
 	set_law_base_addr(idx, addr);
@@ -81,7 +81,7 @@ void set_law(u8 idx, phys_addr_t addr, enum law_size sz, enum law_trgt_if id)
 
 void disable_law(u8 idx)
 {
-	gd->used_laws &= ~(1 << idx);
+	gd->arch.used_laws &= ~(1 << idx);
 
 	out_be32(LAWAR_ADDR(idx), 0);
 	set_law_base_addr(idx, 0);
@@ -112,7 +112,7 @@ static int get_law_entry(u8 i, struct law_entry *e)
 
 int set_next_law(phys_addr_t addr, enum law_size sz, enum law_trgt_if id)
 {
-	u32 idx = ffz(gd->used_laws);
+	u32 idx = ffz(gd->arch.used_laws);
 
 	if (idx >= FSL_HW_NUM_LAWS)
 		return -1;
@@ -128,11 +128,11 @@ int set_last_law(phys_addr_t addr, enum law_size sz, enum law_trgt_if id)
 	u32 idx;
 
 	/* we have no LAWs free */
-	if (gd->used_laws == -1)
+	if (gd->arch.used_laws == -1)
 		return -1;
 
 	/* grab the last free law */
-	idx = __ilog2(~(gd->used_laws));
+	idx = __ilog2(~(gd->arch.used_laws));
 
 	if (idx >= FSL_HW_NUM_LAWS)
 		return -1;
@@ -240,9 +240,9 @@ void init_laws(void)
 	int i;
 
 #if FSL_HW_NUM_LAWS < 32
-	gd->used_laws = ~((1 << FSL_HW_NUM_LAWS) - 1);
+	gd->arch.used_laws = ~((1 << FSL_HW_NUM_LAWS) - 1);
 #elif FSL_HW_NUM_LAWS == 32
-	gd->used_laws = 0;
+	gd->arch.used_laws = 0;
 #else
 #error FSL_HW_NUM_LAWS can not be greater than 32 w/o code changes
 #endif
@@ -255,7 +255,7 @@ void init_laws(void)
 		u32 lawar = in_be32(LAWAR_ADDR(i));
 
 		if (lawar & LAW_EN)
-			gd->used_laws |= (1 << i);
+			gd->arch.used_laws |= (1 << i);
 	}
 
 #if (defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL)) || \
diff --git a/arch/powerpc/cpu/ppc4xx/4xx_uart.c b/arch/powerpc/cpu/ppc4xx/4xx_uart.c
index 38ba60b..2ab185f 100644
--- a/arch/powerpc/cpu/ppc4xx/4xx_uart.c
+++ b/arch/powerpc/cpu/ppc4xx/4xx_uart.c
@@ -296,10 +296,10 @@ int get_serial_clock(void)
 	 * the UART divisor is available
 	 */
 #ifdef CONFIG_SYS_EXT_SERIAL_CLOCK
-	gd->uart_clk = CONFIG_SYS_EXT_SERIAL_CLOCK;
+	gd->arch.uart_clk = CONFIG_SYS_EXT_SERIAL_CLOCK;
 #else
 	get_sys_info(&sys_info);
-	gd->uart_clk = sys_info.freqUART / udiv;
+	gd->arch.uart_clk = sys_info.freqUART / udiv;
 #endif
 
 	return clk;
diff --git a/arch/powerpc/cpu/ppc4xx/fdt.c b/arch/powerpc/cpu/ppc4xx/fdt.c
index 5ddb880..37f5817 100644
--- a/arch/powerpc/cpu/ppc4xx/fdt.c
+++ b/arch/powerpc/cpu/ppc4xx/fdt.c
@@ -141,7 +141,7 @@ void ft_cpu_setup(void *blob, bd_t *bd)
 
 	/*
 	 * Fixup all UART clocks for CPU internal UARTs
-	 * (only these UARTs are definitely clocked by gd->uart_clk)
+	 * (only these UARTs are definitely clocked by gd->arch.uart_clk)
 	 *
 	 * These UARTs are direct childs of /plb/opb. This code
 	 * does not touch any UARTs that are connected to the ebc.
@@ -160,7 +160,7 @@ void ft_cpu_setup(void *blob, bd_t *bd)
 		    (fdt_node_check_compatible(blob, off, "ns16550") == 0))
 			fdt_setprop(blob, off,
 				    "clock-frequency",
-				    (void*)&(gd->uart_clk), 4);
+				    (void *)&gd->arch.uart_clk, 4);
 	}
 
 	/*
diff --git a/arch/powerpc/include/asm/config_mpc85xx.h b/arch/powerpc/include/asm/config_mpc85xx.h
index 0b9638b..d57c178 100644
--- a/arch/powerpc/include/asm/config_mpc85xx.h
+++ b/arch/powerpc/include/asm/config_mpc85xx.h
@@ -493,6 +493,21 @@
 #define CONFIG_SYS_FSL_ERRATUM_IFC_A003399
 #define CONFIG_SYS_FSL_ERRATUM_ESDHC111
 
+#elif defined(CONFIG_BSC9132)
+#define CONFIG_MAX_CPUS			2
+#define CONFIG_SYS_PPC_E500_DEBUG_TLB	3
+#define CONFIG_FSL_SDHC_V2_3
+#define CONFIG_SYS_FSL_NUM_LAWS		12
+#define CONFIG_TSECV2
+#define CONFIG_SYS_FSL_SEC_COMPAT	4
+#define CONFIG_NUM_DDR_CONTROLLERS	2
+#define CONFIG_SYS_CCSRBAR_DEFAULT	0xff700000
+#define CONFIG_NAND_FSL_IFC
+#define CONFIG_SYS_FSL_ERRATUM_IFC_A003399
+#define CONFIG_SYS_FSL_ERRATUM_ESDHC111
+#define CONFIG_SYS_FSL_ESDHC_P1010_BROKEN_SDCLK
+#define CONFIG_SYS_FSL_PCIE_COMPAT	"fsl,qoriq-pcie-v2.2"
+
 #elif defined(CONFIG_PPC_T4240)
 #define CONFIG_SYS_PPC64		/* 64-bit core */
 #define CONFIG_FSL_CORENET		/* Freescale CoreNet platform */
@@ -523,6 +538,28 @@
 #define CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY
 #define CONFIG_SYS_FSL_ERRATUM_A004468
 #define CONFIG_SYS_FSL_ERRATUM_A_004934
+#define CONFIG_SYS_FSL_ERRATUM_A005871
+#define CONFIG_SYS_CCSRBAR_DEFAULT	0xfe000000
+
+#elif defined(CONFIG_PPC_B4420)
+#define CONFIG_SYS_PPC64		/* 64-bit core */
+#define CONFIG_FSL_CORENET		/* Freescale CoreNet platform */
+#define CONFIG_SYS_FSL_QORIQ_CHASSIS2	/* Freescale Chassis generation 2 */
+#define CONFIG_SYS_FSL_QMAN_V3		/* QMAN version 3 */
+#define CONFIG_MAX_CPUS			2
+#define CONFIG_SYS_FSL_NUM_CC_PLLS	4
+#define CONFIG_SYS_FSL_NUM_LAWS		32
+#define CONFIG_SYS_FSL_SEC_COMPAT	4
+#define CONFIG_SYS_NUM_FMAN		1
+#define CONFIG_SYS_NUM_FM1_DTSEC	4
+#define CONFIG_NUM_DDR_CONTROLLERS	1
+#define CONFIG_SYS_FSL_DDR_VER		FSL_DDR_VER_4_7
+#define CONFIG_SYS_FMAN_V3
+#define CONFIG_SYS_FM_MURAM_SIZE	0x60000
+#define CONFIG_SYS_FSL_TBCLK_DIV	16
+#define CONFIG_SYS_FSL_PCIE_COMPAT	"fsl,qoriq-pcie-v2.4"
+#define CONFIG_SYS_FSL_USB1_PHY_ENABLE
+#define CONFIG_SYS_FSL_ERRATUM_A_004934
 #define CONFIG_SYS_CCSRBAR_DEFAULT	0xfe000000
 
 #elif defined(CONFIG_PPC_B4860)
@@ -537,7 +574,7 @@
 #define CONFIG_SYS_NUM_FMAN		1
 #define CONFIG_SYS_NUM_FM1_DTSEC	6
 #define CONFIG_SYS_NUM_FM1_10GEC	2
-#define CONFIG_NUM_DDR_CONTROLLERS	1
+#define CONFIG_NUM_DDR_CONTROLLERS	2
 #define CONFIG_SYS_FSL_DDR_VER		FSL_DDR_VER_4_7
 #define CONFIG_SYS_FMAN_V3
 #define CONFIG_SYS_FM_MURAM_SIZE	0x60000
diff --git a/arch/powerpc/include/asm/global_data.h b/arch/powerpc/include/asm/global_data.h
index cb3a80b..d5db854 100644
--- a/arch/powerpc/include/asm/global_data.h
+++ b/arch/powerpc/include/asm/global_data.h
@@ -27,76 +27,61 @@
 #include "config.h"
 #include "asm/types.h"
 
-/*
- * The following data structure is placed in some memory wich is
- * available very early after boot (like DPRAM on MPC8xx/MPC82xx, or
- * some locked parts of the data cache) to allow for a minimum set of
- * global variables during system initialization (until we have set
- * up the memory controller so that we can use RAM).
- */
-
-typedef	struct	global_data {
-	bd_t		*bd;
-	unsigned long	flags;
-	unsigned int	baudrate;
-	unsigned long	cpu_clk;	/* CPU clock in Hz! */
-	unsigned long	bus_clk;
+/* Architecture-specific global data */
+struct arch_global_data {
+#if defined(CONFIG_FSL_ESDHC)
+	u32 sdhc_clk;
+#endif
 #if defined(CONFIG_8xx)
-	unsigned long	brg_clk;
+	unsigned long brg_clk;
 #endif
 #if defined(CONFIG_CPM2)
 	/* There are many clocks on the MPC8260 - see page 9-5 */
-	unsigned long	vco_out;
-	unsigned long	cpm_clk;
-	unsigned long	scc_clk;
-	unsigned long	brg_clk;
-#ifdef CONFIG_PCI
-	unsigned long	pci_clk;
-#endif
+	unsigned long vco_out;
+	unsigned long cpm_clk;
+	unsigned long scc_clk;
+	unsigned long brg_clk;
 #endif
-	unsigned long   mem_clk;
+	/* TODO: sjg@chromium.org: Should these be unslgned long? */
 #if defined(CONFIG_MPC83xx)
 	/* There are other clocks in the MPC83XX */
 	u32 csb_clk;
-#if defined(CONFIG_MPC8308) || defined(CONFIG_MPC831x) || \
+# if defined(CONFIG_MPC8308) || defined(CONFIG_MPC831x) || \
 	defined(CONFIG_MPC834x) || defined(CONFIG_MPC837x)
 	u32 tsec1_clk;
 	u32 tsec2_clk;
 	u32 usbdr_clk;
-#elif defined(CONFIG_MPC8309)
+# elif defined(CONFIG_MPC8309)
 	u32 usbdr_clk;
-#endif
-#if defined (CONFIG_MPC834x)
+# endif
+# if defined(CONFIG_MPC834x)
 	u32 usbmph_clk;
-#endif /* CONFIG_MPC834x */
-#if defined(CONFIG_MPC8315)
+# endif /* CONFIG_MPC834x */
+# if defined(CONFIG_MPC8315)
 	u32 tdm_clk;
-#endif
+# endif
 	u32 core_clk;
 	u32 enc_clk;
 	u32 lbiu_clk;
 	u32 lclk_clk;
-	u32 pci_clk;
-#if defined(CONFIG_MPC8308) || defined(CONFIG_MPC831x) || \
+# if defined(CONFIG_MPC8308) || defined(CONFIG_MPC831x) || \
 	defined(CONFIG_MPC837x)
 	u32 pciexp1_clk;
 	u32 pciexp2_clk;
-#endif
-#if defined(CONFIG_MPC837x) || defined(CONFIG_MPC8315)
+# endif
+# if defined(CONFIG_MPC837x) || defined(CONFIG_MPC8315)
 	u32 sata_clk;
-#endif
-#if defined(CONFIG_MPC8360)
-	u32  mem_sec_clk;
-#endif /* CONFIG_MPC8360 */
-#endif
-#if defined(CONFIG_FSL_ESDHC)
-	u32 sdhc_clk;
+# endif
+# if defined(CONFIG_MPC8360)
+	u32 mem_sec_clk;
+# endif /* CONFIG_MPC8360 */
 #endif
 #if defined(CONFIG_MPC85xx) || defined(CONFIG_MPC86xx)
 	u32 lbc_clk;
 	void *cpu;
 #endif /* CONFIG_MPC85xx || CONFIG_MPC86xx */
-#if defined(CONFIG_MPC83xx) || defined(CONFIG_MPC85xx) || defined(CONFIG_MPC86xx)
+#if defined(CONFIG_MPC83xx) || defined(CONFIG_MPC85xx) || \
+		defined(CONFIG_MPC86xx)
 	u32 i2c1_clk;
 	u32 i2c2_clk;
 #endif
@@ -113,68 +98,32 @@ typedef	struct	global_data {
 	u32 used_tlb_cams[(CONFIG_SYS_NUM_TLBCAMS+31)/32];
 #endif
 #if defined(CONFIG_MPC5xxx)
-	unsigned long	ipb_clk;
-	unsigned long	pci_clk;
+	unsigned long ipb_clk;
 #endif
 #if defined(CONFIG_MPC512X)
 	u32 ips_clk;
 	u32 csb_clk;
-	u32 pci_clk;
 #endif /* CONFIG_MPC512X */
 #if defined(CONFIG_MPC8220)
-	unsigned long   bExtUart;
-	unsigned long   inp_clk;
-	unsigned long   pci_clk;
-	unsigned long   vco_clk;
-	unsigned long   pev_clk;
-	unsigned long   flb_clk;
-#endif
-	phys_size_t	ram_size;	/* RAM size */
-	unsigned long	reset_status;	/* reset status register at boot	*/
-#if defined(CONFIG_MPC83xx)
-	unsigned long	arbiter_event_attributes;
-	unsigned long	arbiter_event_address;
+	unsigned long inp_clk;
+	unsigned long vco_clk;
+	unsigned long pev_clk;
+	unsigned long flb_clk;
 #endif
-	unsigned long	env_addr;	/* Address  of Environment struct	*/
-	unsigned long	env_valid;	/* Checksum of Environment valid?	*/
-	unsigned long	have_console;	/* serial_init() was called		*/
-#ifdef CONFIG_PRE_CONSOLE_BUFFER
-	unsigned long	precon_buf_idx;	/* Pre-Console buffer index */
+	unsigned long reset_status;	/* reset status register at boot */
+#if defined(CONFIG_MPC83xx)
+	unsigned long arbiter_event_attributes;
+	unsigned long arbiter_event_address;
 #endif
 #if defined(CONFIG_SYS_ALLOC_DPRAM) || defined(CONFIG_CPM2)
-	unsigned int	dp_alloc_base;
-	unsigned int	dp_alloc_top;
+	unsigned int dp_alloc_base;
+	unsigned int dp_alloc_top;
 #endif
 #if defined(CONFIG_4xx)
-	u32  uart_clk;
+	u32 uart_clk;
 #endif /* CONFIG_4xx */
 #if defined(CONFIG_SYS_GT_6426x)
-	unsigned int	mirror_hack[16];
-#endif
-#if defined(CONFIG_A3000)	|| \
-    defined(CONFIG_HIDDEN_DRAGON)  || \
-    defined(CONFIG_MUSENKI)	||  \
-    defined(CONFIG_SANDPOINT)
-	void *		console_addr;
-#endif
-	unsigned long	relocaddr;	/* Start address of U-Boot in RAM */
-#if defined(CONFIG_LCD) || defined(CONFIG_VIDEO)
-	unsigned long	fb_base;	/* Base address of framebuffer memory	*/
-#endif
-#if defined(CONFIG_POST) || defined(CONFIG_LOGBUFFER)
-	unsigned long	post_log_word;  /* Record POST activities */
-	unsigned long	post_log_res; /* success of POST test */
-	unsigned long	post_init_f_time;  /* When post_init_f started */
-#endif
-#ifdef CONFIG_BOARD_TYPES
-	unsigned long	board_type;
-#endif
-#ifdef CONFIG_MODEM_SUPPORT
-	unsigned long do_mdm_init;
-	unsigned long be_quiet;
-#endif
-#if defined(CONFIG_LWMON) || defined(CONFIG_LWMON5)
-	unsigned long kbd_status;
+	unsigned int mirror_hack[16];
 #endif
 #ifdef CONFIG_SYS_FPGA_COUNT
 	unsigned fpga_state[CONFIG_SYS_FPGA_COUNT];
@@ -182,11 +131,12 @@ typedef	struct	global_data {
 #if defined(CONFIG_WD_MAX_RATE)
 	unsigned long long wdt_last;	/* trace watch-dog triggering rate */
 #endif
-	void		**jt;		/* jump table */
-	char		env_buf[32];	/* buffer for getenv() before reloc. */
-} gd_t;
+#if defined(CONFIG_LWMON) || defined(CONFIG_LWMON5)
+	unsigned long kbd_status;
+#endif
+};
 
-#include <asm-generic/global_data_flags.h>
+#include <asm-generic/global_data.h>
 
 #if 1
 #define DECLARE_GLOBAL_DATA_PTR     register volatile gd_t *gd asm ("r2")
diff --git a/arch/powerpc/include/asm/immap_85xx.h b/arch/powerpc/include/asm/immap_85xx.h
index 296b549..4eb3f79 100644
--- a/arch/powerpc/include/asm/immap_85xx.h
+++ b/arch/powerpc/include/asm/immap_85xx.h
@@ -1840,7 +1840,7 @@ typedef struct ccsr_gur {
 #define FSL_CORENET2_RCWSR4_SRDS3_PRTCL_SHIFT	11
 #define FSL_CORENET2_RCWSR4_SRDS4_PRTCL		0x000000f8
 #define FSL_CORENET2_RCWSR4_SRDS4_PRTCL_SHIFT	3
-#elif defined(CONFIG_PPC_B4860)
+#elif defined(CONFIG_PPC_B4860) || defined(CONFIG_PPC_B4420)
 #define FSL_CORENET2_RCWSR4_SRDS1_PRTCL	0xfe000000
 #define FSL_CORENET2_RCWSR4_SRDS1_PRTCL_SHIFT	25
 #define FSL_CORENET2_RCWSR4_SRDS2_PRTCL	0x00ff0000
@@ -2150,7 +2150,7 @@ typedef struct ccsr_gur {
 #define MPC85xx_PORPLLSR_DDR_RATIO	0x3e000000
 #define MPC85xx_PORPLLSR_DDR_RATIO_SHIFT	25
 #else
-#ifdef CONFIG_BSC9131
+#if defined(CONFIG_BSC9131) || defined(CONFIG_BSC9132)
 #define MPC85xx_PORPLLSR_DDR_RATIO	0x00003f00
 #else
 #define MPC85xx_PORPLLSR_DDR_RATIO	0x00003e00
@@ -2164,6 +2164,11 @@ typedef struct ccsr_gur {
 	u32	porbmsr;	/* POR boot mode status */
 #define MPC85xx_PORBMSR_HA		0x00070000
 #define MPC85xx_PORBMSR_HA_SHIFT	16
+#define MPC85XX_PORBMSR_ROMLOC_SHIFT	24
+#define PORBMSR_ROMLOC_SPI	0x6
+#define PORBMSR_ROMLOC_SDHC	0x7
+#define PORBMSR_ROMLOC_NAND_2K	0x9
+#define PORBMSR_ROMLOC_NOR	0xf
 	u32	porimpscr;	/* POR I/O impedance status & control */
 	u32	pordevsr;	/* POR I/O device status regsiter */
 #if defined(CONFIG_P1017) || defined(CONFIG_P1023)
@@ -2188,6 +2193,9 @@ typedef struct ccsr_gur {
 #if defined(CONFIG_P1010)
 #define MPC85xx_PORDEVSR_IO_SEL		0x00600000
 #define MPC85xx_PORDEVSR_IO_SEL_SHIFT	21
+#elif defined(CONFIG_BSC9132)
+#define MPC85xx_PORDEVSR_IO_SEL		0x00FE0000
+#define MPC85xx_PORDEVSR_IO_SEL_SHIFT	17
 #else
 #define MPC85xx_PORDEVSR_IO_SEL		0x00780000
 #define MPC85xx_PORDEVSR_IO_SEL_SHIFT	19
@@ -2345,6 +2353,10 @@ typedef struct ccsr_gur {
 #define MPC85xx_PMUXCR_SPI1_CS3_dbg_adi2_rxen	0x00000002
 #define MPC85xx_PMUXCR_SPI1_CS3_GPO76		0x00000003
 #endif
+#ifdef CONFIG_BSC9132
+#define MPC85xx_PMUXCR0_SIM_SEL_MASK	0x0003b000
+#define MPC85xx_PMUXCR0_SIM_SEL		0x00014000
+#endif
 	u32	pmuxcr2;	/* Alt. function signal multiplex control 2 */
 #if defined(CONFIG_P1010) || defined(CONFIG_P1014)
 #define MPC85xx_PMUXCR2_UART_GPIO		0x40000000
@@ -2375,6 +2387,7 @@ typedef struct ccsr_gur {
 #define MPC85xx_PMUXCR2_ETSECUSB_MASK	0x001f8000
 #define MPC85xx_PMUXCR2_USB		0x00150000
 #endif
+#if defined(CONFIG_BSC9131) || defined(CONFIG_BSC9132)
 #if defined(CONFIG_BSC9131)
 #define MPC85xx_PMUXCR2_UART_CTS_B0_SIM_PD		0X40000000
 #define MPC85xx_PMUXCR2_UART_CTS_B0_DSP_TMS		0X80000000
@@ -2418,8 +2431,9 @@ typedef struct ccsr_gur {
 #define MPC85xx_PMUXCR2_ANT3_AGC_GPO53			0x00000004
 #define MPC85xx_PMUXCR2_ANT3_DO_TDM			0x00000001
 #define MPC85xx_PMUXCR2_ANT3_DO_GPIO46_49		0x00000002
+#endif
 	u32	pmuxcr3;
-
+#if defined(CONFIG_BSC9131)
 #define MPC85xx_PMUXCR3_ANT3_DO4_5_TDM			0x40000000
 #define MPC85xx_PMUXCR3_ANT3_DO4_5_GPIO_50_51		0x80000000
 #define MPC85xx_PMUXCR3_ANT3_DO6_7_TRIG_IN_SRESET_B	0x10000000
@@ -2434,6 +2448,13 @@ typedef struct ccsr_gur {
 #define MPC85xx_PMUXCR3_SPI2_CS3_GPO94			0x00040000
 #define MPC85xx_PMUXCR3_ANT2_AGC_RSVD			0x00010000
 #define MPC85xx_PMUXCR3_ANT2_GPO89			0x00030000
+#endif
+#ifdef CONFIG_BSC9132
+#define MPC85xx_PMUXCR3_USB_SEL_MASK	0x0000ff00
+#define MPC85xx_PMUXCR3_UART2_SEL	0x00005000
+#define MPC85xx_PMUXCR3_UART3_SEL_MASK	0xc0000000
+#define MPC85xx_PMUXCR3_UART3_SEL	0x40000000
+#endif
 	u32 pmuxcr4;
 #else
 	u8	res6[8];
@@ -2727,6 +2748,12 @@ typedef struct ccsr_sec {
 #define SEC_CHANUM_MS_JRNUM_SHIFT	28
 #define SEC_CHANUM_MS_DECONUM_MASK	0x0f000000
 #define SEC_CHANUM_MS_DECONUM_SHIFT	24
+#define SEC_SECVID_MS_IPID_MASK	0xffff0000
+#define SEC_SECVID_MS_IPID_SHIFT	16
+#define SEC_SECVID_MS_MAJ_REV_MASK	0x0000ff00
+#define SEC_SECVID_MS_MAJ_REV_SHIFT	8
+#define SEC_CCBVID_ERA_MASK		0xff000000
+#define SEC_CCBVID_ERA_SHIFT		24
 #endif
 
 typedef struct ccsr_qman {
@@ -2962,6 +2989,7 @@ struct ccsr_pman {
 #endif
 #define CONFIG_SYS_MDIO1_OFFSET			0x24000
 #define CONFIG_SYS_MPC85xx_ESDHC_OFFSET		0x2e000
+#define CONFIG_SYS_FSL_SEC_OFFSET		0x30000
 #define CONFIG_SYS_MPC85xx_SERDES2_OFFSET	0xE3100
 #define CONFIG_SYS_MPC85xx_SERDES1_OFFSET	0xE3000
 #define CONFIG_SYS_SNVS_OFFSET			0xE6000
diff --git a/arch/powerpc/include/asm/mmu.h b/arch/powerpc/include/asm/mmu.h
index 2e0e292..b700a3a 100644
--- a/arch/powerpc/include/asm/mmu.h
+++ b/arch/powerpc/include/asm/mmu.h
@@ -401,8 +401,8 @@ extern void print_bats(void);
 #define MAS1_IPROT	0x40000000
 #define MAS1_TID(x)	(((x) << 16) & 0x3FFF0000)
 #define MAS1_TS		0x00001000
-#define MAS1_TSIZE(x)	(((x) << 8) & 0x00000F00)
-#define TSIZE_TO_BYTES(x) (1ULL << (((x) * 2) + 10))
+#define MAS1_TSIZE(x)	(((x) << 7) & 0x00000F80)
+#define TSIZE_TO_BYTES(x) (1ULL << ((x) + 10))
 
 #define MAS2_EPN	0xFFFFF000
 #define MAS2_X0		0x00000040
@@ -458,22 +458,38 @@ extern void print_bats(void);
 #define FSL_BOOKE_MAS7(rpn) \
 		(((u64)(rpn)) >> 32)
 
-#define BOOKE_PAGESZ_1K         0
-#define BOOKE_PAGESZ_4K         1
-#define BOOKE_PAGESZ_16K        2
-#define BOOKE_PAGESZ_64K        3
-#define BOOKE_PAGESZ_256K       4
-#define BOOKE_PAGESZ_1M         5
-#define BOOKE_PAGESZ_4M         6
-#define BOOKE_PAGESZ_16M        7
-#define BOOKE_PAGESZ_64M        8
-#define BOOKE_PAGESZ_256M       9
-#define BOOKE_PAGESZ_1G		10
-#define BOOKE_PAGESZ_4G		11
-#define BOOKE_PAGESZ_16GB	12
-#define BOOKE_PAGESZ_64GB	13
-#define BOOKE_PAGESZ_256GB	14
-#define BOOKE_PAGESZ_1TB	15
+#define BOOKE_PAGESZ_1K		0
+#define BOOKE_PAGESZ_2K		1
+#define BOOKE_PAGESZ_4K		2
+#define BOOKE_PAGESZ_8K		3
+#define BOOKE_PAGESZ_16K	4
+#define BOOKE_PAGESZ_32K	5
+#define BOOKE_PAGESZ_64K	6
+#define BOOKE_PAGESZ_128K	7
+#define BOOKE_PAGESZ_256K	8
+#define BOOKE_PAGESZ_512K	9
+#define BOOKE_PAGESZ_1M		10
+#define BOOKE_PAGESZ_2M		11
+#define BOOKE_PAGESZ_4M		12
+#define BOOKE_PAGESZ_8M		13
+#define BOOKE_PAGESZ_16M	14
+#define BOOKE_PAGESZ_32M	15
+#define BOOKE_PAGESZ_64M	16
+#define BOOKE_PAGESZ_128M	17
+#define BOOKE_PAGESZ_256M	18
+#define BOOKE_PAGESZ_512M	19
+#define BOOKE_PAGESZ_1G		20
+#define BOOKE_PAGESZ_2G		21
+#define BOOKE_PAGESZ_4G		22
+#define BOOKE_PAGESZ_8G		23
+#define BOOKE_PAGESZ_16GB	24
+#define BOOKE_PAGESZ_32GB	25
+#define BOOKE_PAGESZ_64GB	26
+#define BOOKE_PAGESZ_128GB	27
+#define BOOKE_PAGESZ_256GB	28
+#define BOOKE_PAGESZ_512GB	29
+#define BOOKE_PAGESZ_1TB	30
+#define BOOKE_PAGESZ_2TB	31
 
 #define TLBIVAX_ALL		4
 #define TLBIVAX_TLB0		0
diff --git a/arch/powerpc/include/asm/processor.h b/arch/powerpc/include/asm/processor.h
index 19fe250..8c91f08 100644
--- a/arch/powerpc/include/asm/processor.h
+++ b/arch/powerpc/include/asm/processor.h
@@ -1113,6 +1113,8 @@
 
 #define SVR_9130	0x860001
 #define SVR_9131	0x860000
+#define SVR_9132	0x861000
+#define SVR_9232	0x861400
 
 #define SVR_Unknown	0xFFFFFF
 
diff --git a/arch/powerpc/lib/board.c b/arch/powerpc/lib/board.c
index 6a7bf4b..12270a4 100644
--- a/arch/powerpc/lib/board.c
+++ b/arch/powerpc/lib/board.c
@@ -556,11 +556,11 @@ void board_init_f(ulong bootflag)
 #endif
 #if defined(CONFIG_MPC8220)
 	bd->bi_mbar_base = CONFIG_SYS_MBAR;	/* base of internal registers */
-	bd->bi_inpfreq = gd->inp_clk;
+	bd->bi_inpfreq = gd->arch.inp_clk;
 	bd->bi_pcifreq = gd->pci_clk;
-	bd->bi_vcofreq = gd->vco_clk;
-	bd->bi_pevfreq = gd->pev_clk;
-	bd->bi_flbfreq = gd->flb_clk;
+	bd->bi_vcofreq = gd->arch.vco_clk;
+	bd->bi_pevfreq = gd->arch.pev_clk;
+	bd->bi_flbfreq = gd->arch.flb_clk;
 
 	/* store bootparam to sram (backward compatible), here? */
 	{
@@ -568,10 +568,10 @@ void board_init_f(ulong bootflag)
 
 		*sram++ = gd->ram_size;
 		*sram++ = gd->bus_clk;
-		*sram++ = gd->inp_clk;
+		*sram++ = gd->arch.inp_clk;
 		*sram++ = gd->cpu_clk;
-		*sram++ = gd->vco_clk;
-		*sram++ = gd->flb_clk;
+		*sram++ = gd->arch.vco_clk;
+		*sram++ = gd->arch.flb_clk;
 		*sram++ = 0xb8c3ba11;	/* boot signature */
 	}
 #endif
@@ -580,16 +580,16 @@ void board_init_f(ulong bootflag)
 	bd->bi_intfreq = gd->cpu_clk;	/* Internal Freq, in Hz */
 	bd->bi_busfreq = gd->bus_clk;	/* Bus Freq,      in Hz */
 #if defined(CONFIG_CPM2)
-	bd->bi_cpmfreq = gd->cpm_clk;
-	bd->bi_brgfreq = gd->brg_clk;
-	bd->bi_sccfreq = gd->scc_clk;
-	bd->bi_vco = gd->vco_out;
+	bd->bi_cpmfreq = gd->arch.cpm_clk;
+	bd->bi_brgfreq = gd->arch.brg_clk;
+	bd->bi_sccfreq = gd->arch.scc_clk;
+	bd->bi_vco = gd->arch.vco_out;
 #endif /* CONFIG_CPM2 */
 #if defined(CONFIG_MPC512X)
-	bd->bi_ipsfreq = gd->ips_clk;
+	bd->bi_ipsfreq = gd->arch.ips_clk;
 #endif /* CONFIG_MPC512X */
 #if defined(CONFIG_MPC5xxx)
-	bd->bi_ipbfreq = gd->ipb_clk;
+	bd->bi_ipbfreq = gd->arch.ipb_clk;
 	bd->bi_pcifreq = gd->pci_clk;
 #endif /* CONFIG_MPC5xxx */
 	bd->bi_baudrate = gd->baudrate;	/* Console Baudrate     */
@@ -649,10 +649,11 @@ void board_init_r(gd_t *id, ulong dest_addr)
 
 #if defined(CONFIG_MPC85xx) || defined(CONFIG_MPC86xx)
 	/*
-	 * The gd->cpu pointer is set to an address in flash before relocation.
-	 * We need to update it to point to the same CPU entry in RAM.
+	 * The gd->arch.cpu pointer is set to an address in flash before
+	 * relocation.  We need to update it to point to the same CPU entry
+	 * in RAM.
 	 */
-	gd->cpu += dest_addr - CONFIG_SYS_MONITOR_BASE;
+	gd->arch.cpu += dest_addr - CONFIG_SYS_MONITOR_BASE;
 
 	/*
 	 * If we didn't know the cpu mask & # cores, we can save them of
diff --git a/arch/sandbox/cpu/cpu.c b/arch/sandbox/cpu/cpu.c
index d7684d3..b2788d5 100644
--- a/arch/sandbox/cpu/cpu.c
+++ b/arch/sandbox/cpu/cpu.c
@@ -54,7 +54,7 @@ int cleanup_before_linux(void)
 
 void *map_physmem(phys_addr_t paddr, unsigned long len, unsigned long flags)
 {
-	return (void *)(gd->ram_buf + paddr);
+	return (void *)(gd->arch.ram_buf + paddr);
 }
 
 void flush_dcache_range(unsigned long start, unsigned long stop)
diff --git a/arch/sandbox/include/asm/global_data.h b/arch/sandbox/include/asm/global_data.h
index 78a751d..3bedf77 100644
--- a/arch/sandbox/include/asm/global_data.h
+++ b/arch/sandbox/include/asm/global_data.h
@@ -25,30 +25,13 @@
 
 #ifndef	__ASM_GBL_DATA_H
 #define __ASM_GBL_DATA_H
-/*
- * The following data structure is placed in some memory wich is
- * available very early after boot (like DPRAM on MPC8xx/MPC82xx, or
- * some locked parts of the data cache) to allow for a minimum set of
- * global variables during system initialization (until we have set
- * up the memory controller so that we can use RAM).
- */
 
-typedef	struct global_data {
-	bd_t		*bd;
-	unsigned long	flags;
-	unsigned int	baudrate;
-	unsigned long	have_console;	/* serial_init() was called */
-	unsigned long	env_addr;	/* Address  of Environment struct */
-	unsigned long	env_valid;	/* Checksum of Environment valid? */
-	unsigned long	fb_base;	/* base address of frame buffer */
+/* Architecture-specific global data */
+struct arch_global_data {
 	u8		*ram_buf;	/* emulated RAM buffer */
-	phys_size_t	ram_size;	/* RAM size */
-	const void	*fdt_blob;	/* Our device tree, NULL if none */
-	void		**jt;		/* jump table */
-	char		env_buf[32];	/* buffer for getenv() before reloc. */
-} gd_t;
+};
 
-#include <asm-generic/global_data_flags.h>
+#include <asm-generic/global_data.h>
 
 #define DECLARE_GLOBAL_DATA_PTR     extern gd_t *gd
 
diff --git a/arch/sandbox/lib/board.c b/arch/sandbox/lib/board.c
index 83858c1..3752fab 100644
--- a/arch/sandbox/lib/board.c
+++ b/arch/sandbox/lib/board.c
@@ -174,7 +174,7 @@ void board_init_f(ulong bootflag)
 	mem = os_malloc(CONFIG_SYS_SDRAM_SIZE);
 
 	assert(mem);
-	gd->ram_buf = mem;
+	gd->arch.ram_buf = mem;
 	addr = (ulong)(mem + size);
 
 	/*
@@ -227,8 +227,8 @@ void board_init_r(gd_t *id, ulong dest_addr)
 #endif
 
 	/* The Malloc area is at the top of simulated DRAM */
-	mem_malloc_init((ulong)gd->ram_buf + gd->ram_size - TOTAL_MALLOC_LEN,
-			TOTAL_MALLOC_LEN);
+	mem_malloc_init((ulong)gd->arch.ram_buf + gd->ram_size -
+			TOTAL_MALLOC_LEN, TOTAL_MALLOC_LEN);
 
 	/* initialize environment */
 	env_relocate();
diff --git a/arch/sh/include/asm/global_data.h b/arch/sh/include/asm/global_data.h
index 9a2c193..0360230 100644
--- a/arch/sh/include/asm/global_data.h
+++ b/arch/sh/include/asm/global_data.h
@@ -27,24 +27,11 @@
 #ifndef	__ASM_SH_GLOBALDATA_H_
 #define __ASM_SH_GLOBALDATA_H_
 
-typedef	struct global_data
-{
-	bd_t		*bd;
-	unsigned long	flags;
-	unsigned int	baudrate;
-	unsigned long	cpu_clk;	/* CPU clock in Hz! */
-	unsigned long	have_console;	/* serial_init() was called */
-#ifdef CONFIG_PRE_CONSOLE_BUFFER
-	unsigned long	precon_buf_idx;	/* Pre-Console buffer index */
-#endif
-	phys_size_t	ram_size;	/* RAM size */
-	unsigned long	env_addr;	/* Address  of Environment struct */
-	unsigned long	env_valid;	/* Checksum of Environment valid */
-	void		**jt;		/* Standalone app jump table */
-	char		env_buf[32];	/* buffer for getenv() before reloc. */
-} gd_t;
+/* Architecture-specific global data */
+struct arch_global_data {
+};
 
-#include <asm-generic/global_data_flags.h>
+#include <asm-generic/global_data.h>
 
 #define DECLARE_GLOBAL_DATA_PTR	register gd_t *gd asm ("r13")
 
diff --git a/arch/sparc/include/asm/global_data.h b/arch/sparc/include/asm/global_data.h
index aa63b35..9f019b1 100644
--- a/arch/sparc/include/asm/global_data.h
+++ b/arch/sparc/include/asm/global_data.h
@@ -29,54 +29,11 @@
 
 #include "asm/types.h"
 
-/*
- * The following data structure is placed in some memory wich is
- * available very early after boot (like DPRAM on MPC8xx/MPC82xx, or
- * some locked parts of the data cache) to allow for a minimum set of
- * global variables during system initialization (until we have set
- * up the memory controller so that we can use RAM).
- */
-
-typedef struct global_data {
-	bd_t *bd;
-	unsigned long flags;
-	unsigned int baudrate;
-	unsigned long cpu_clk;	/* CPU clock in Hz!             */
-	unsigned long bus_clk;
-
-	phys_size_t ram_size;		/* RAM size */
-	unsigned long reloc_off;	/* Relocation Offset */
-	unsigned long reset_status;	/* reset status register at boot        */
-	unsigned long env_addr;	/* Address  of Environment struct       */
-	unsigned long env_valid;	/* Checksum of Environment valid?       */
-	unsigned long have_console;	/* serial_init() was called */
-
-#ifdef CONFIG_PRE_CONSOLE_BUFFER
-	unsigned long	precon_buf_idx;	/* Pre-Console buffer index */
-#endif
-#if defined(CONFIG_LCD) || defined(CONFIG_VIDEO)
-	unsigned long fb_base;	/* Base address of framebuffer memory   */
-#endif
-#if defined(CONFIG_POST) || defined(CONFIG_LOGBUFFER)
-	unsigned long post_log_word;	/* Record POST activities */
-	unsigned long post_log_res;	/* success of POST test */
-	unsigned long post_init_f_time;	/* When post_init_f started */
-#endif
-#ifdef CONFIG_BOARD_TYPES
-	unsigned long board_type;
-#endif
-#ifdef CONFIG_MODEM_SUPPORT
-	unsigned long do_mdm_init;
-	unsigned long be_quiet;
-#endif
-#ifdef CONFIG_LWMON
-	unsigned long kbd_status;
-#endif
-	void	**jt;			/* jump table */
-	char	env_buf[32];		/* buffer for getenv() before reloc. */
-} gd_t;
+/* Architecture-specific global data */
+struct arch_global_data {
+};
 
-#include <asm-generic/global_data_flags.h>
+#include <asm-generic/global_data.h>
 
 #define DECLARE_GLOBAL_DATA_PTR     register volatile gd_t *gd asm ("%g7")
 
diff --git a/arch/x86/cpu/cpu.c b/arch/x86/cpu/cpu.c
index 315e87a..6a23974 100644
--- a/arch/x86/cpu/cpu.c
+++ b/arch/x86/cpu/cpu.c
@@ -100,7 +100,9 @@ void setup_gdt(gd_t *id, u64 *gdt_addr)
 	gdt_addr[X86_GDT_ENTRY_32BIT_DS] = GDT_ENTRY(0xc093, 0, 0xfffff);
 
 	/* FS: data, read/write, 4 GB, base (Global Data Pointer) */
-	gdt_addr[X86_GDT_ENTRY_32BIT_FS] = GDT_ENTRY(0xc093, (ulong)id, 0xfffff);
+	id->arch.gd_addr = id;
+	gdt_addr[X86_GDT_ENTRY_32BIT_FS] = GDT_ENTRY(0xc093,
+		     (ulong)&id->arch.gd_addr, 0xfffff);
 
 	/* 16-bit CS: code, read/execute, 64 kB, base 0 */
 	gdt_addr[X86_GDT_ENTRY_16BIT_CS] = GDT_ENTRY(0x109b, 0, 0x0ffff);
diff --git a/arch/x86/cpu/start.S b/arch/x86/cpu/start.S
index e960e21..f389584 100644
--- a/arch/x86/cpu/start.S
+++ b/arch/x86/cpu/start.S
@@ -113,9 +113,6 @@ car_init_ret:
 	/* Set second parameter to setup_gdt */
 	movl	%esp, %edx
 
-	/* gd->gd_addr = gd (Required to allow gd->xyz to work) */
-	movl	%eax, (%eax)
-
 	/* Setup global descriptor table so gd->xyz works */
 	call	setup_gdt
 
@@ -171,9 +168,6 @@ board_init_f_r_trampoline:
 	/* Set second parameter to setup_gdt */
 	movl	%esp, %edx
 
-	/* gd->gd_addr = gd (Required to allow gd->xyz to work) */
-	movl	%eax, (%eax)
-
 	/* Setup global descriptor table so gd->xyz works */
 	call	setup_gdt
 
diff --git a/arch/x86/include/asm/global_data.h b/arch/x86/include/asm/global_data.h
index dc6402b..8a96fc9 100644
--- a/arch/x86/include/asm/global_data.h
+++ b/arch/x86/include/asm/global_data.h
@@ -23,46 +23,19 @@
 
 #ifndef	__ASM_GBL_DATA_H
 #define __ASM_GBL_DATA_H
-/*
- * The following data structure is placed in some memory wich is
- * available very early after boot (like DPRAM on MPC8xx/MPC82xx, or
- * some locked parts of the data cache) to allow for a minimum set of
- * global variables during system initialization (until we have set
- * up the memory controller so that we can use RAM).
- */
 
 #ifndef __ASSEMBLY__
 
-#include <asm/u-boot.h>
-
-typedef struct global_data gd_t;
+/* Architecture-specific global data */
+struct arch_global_data {
+	struct global_data *gd_addr;		/* Location of Global Data */
+};
 
-struct global_data {
-	/* NOTE: gd_addr MUST be first member of struct global_data! */
-	gd_t *gd_addr;	/* Location of Global Data */
-	bd_t		*bd;
-	unsigned long	flags;
-	unsigned int	baudrate;
-	unsigned long	have_console;	/* serial_init() was called */
-#ifdef CONFIG_PRE_CONSOLE_BUFFER
-	unsigned long	precon_buf_idx;	/* Pre-Console buffer index */
 #endif
-	unsigned long	reloc_off;	/* Relocation Offset */
-	unsigned long	load_off;	/* Load Offset */
-	unsigned long	env_addr;	/* Address  of Environment struct */
-	unsigned long	env_valid;	/* Checksum of Environment valid? */
-	unsigned long	cpu_clk;	/* CPU clock in Hz!		*/
-	unsigned long	bus_clk;
-	unsigned long	relocaddr;	/* Start address of U-Boot in RAM */
-	unsigned long	start_addr_sp;	/* start_addr_stackpointer */
-	unsigned long	gdt_addr;	/* Location of GDT */
-	phys_size_t	ram_size;	/* RAM size */
-	unsigned long	reset_status;	/* reset status register at boot */
-	const void	*fdt_blob;	/* Our device tree, NULL if none */
-	void		**jt;		/* jump table */
-	char		env_buf[32];	/* buffer for getenv() before reloc. */
-};
 
+#include <asm-generic/global_data.h>
+
+#ifndef __ASSEMBLY__
 static inline gd_t *get_fs_gd_ptr(void)
 {
 	gd_t *gd_ptr;
@@ -76,8 +49,6 @@ static inline gd_t *get_fs_gd_ptr(void)
 
 #endif
 
-#include <asm-generic/global_data_flags.h>
-
 /*
  * Our private Global Data Flags
  */
diff --git a/board/dbau1x00/u-boot.lds b/board/dbau1x00/u-boot.lds
deleted file mode 100644
index 8a871cf..0000000
--- a/board/dbau1x00/u-boot.lds
+++ /dev/null
@@ -1,69 +0,0 @@
-/*
- * (C) Copyright 2003
- * Wolfgang Denk Engineering, <wd@denx.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
-OUTPUT_FORMAT("elf32-bigmips", "elf32-bigmips", "elf32-bigmips")
-*/
-OUTPUT_FORMAT("elf32-tradbigmips", "elf32-tradbigmips", "elf32-tradlittlemips")
-OUTPUT_ARCH(mips)
-ENTRY(_start)
-SECTIONS
-{
-	. = 0x00000000;
-
-	. = ALIGN(4);
-	.text       :
-	{
-	  *(.text*)
-	}
-
-	. = ALIGN(4);
-	.rodata  : { *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) }
-
-	. = ALIGN(4);
-	.data  : { *(.data*) }
-
-	. = .;
-	_gp = ALIGN(16) + 0x7ff0;
-
-	.got : {
-	  __got_start = .;
-	  *(.got)
-	  __got_end = .;
-	}
-
-	.sdata  : { *(.sdata*) }
-
-	. = ALIGN(4);
-	.u_boot_list : {
-		#include <u-boot.lst>
-	}
-
-	uboot_end_data = .;
-	num_got_entries = (__got_end - __got_start) >> 2;
-
-	. = ALIGN(4);
-	.sbss (NOLOAD)  : { *(.sbss*) }
-	.bss (NOLOAD)  : { *(.bss*) . = ALIGN(4); }
-	uboot_end = .;
-}
diff --git a/board/evb64260/mpsc.c b/board/evb64260/mpsc.c
index f3dc20b..9c211ac 100644
--- a/board/evb64260/mpsc.c
+++ b/board/evb64260/mpsc.c
@@ -88,7 +88,7 @@ static void galsdma_enable_rx(void);
 
 
 /* GT64240A errata: cant read MPSC/BRG registers... so make mirrors in ram for read/modify write */
-#define MIRROR_HACK ((struct _tag_mirror_hack *)&(gd->mirror_hack[0]))
+#define MIRROR_HACK ((struct _tag_mirror_hack *)&(gd->arch.mirror_hack[0]))
 
 #define GT_REG_WRITE_MIRROR_G(a,d) {MIRROR_HACK->a ## _M = d; GT_REG_WRITE(a,d);}
 #define GTREGREAD_MIRROR_G(a) (MIRROR_HACK->a ## _M)
diff --git a/board/freescale/b4860qds/Makefile b/board/freescale/b4860qds/Makefile
new file mode 100644
index 0000000..06018f4
--- /dev/null
+++ b/board/freescale/b4860qds/Makefile
@@ -0,0 +1,54 @@
+#
+# Copyright 2012 Freescale Semiconductor, Inc.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= $(obj)lib$(BOARD).o
+
+COBJS-y	+= $(BOARD).o
+COBJS-y	+= ddr.o
+COBJS-$(CONFIG_B4860QDS)+= eth_b4860qds.o
+COBJS-$(CONFIG_PCI)	+= pci.o
+COBJS-y	+= law.o
+COBJS-y	+= tlb.o
+
+SRCS	:= $(SOBJS:.o=.S) $(COBJS-y:.o=.c)
+OBJS	:= $(addprefix $(obj),$(COBJS-y))
+SOBJS	:= $(addprefix $(obj),$(SOBJS))
+
+$(LIB):	$(obj).depend $(OBJS) $(SOBJS)
+	$(call cmd_link_o_target, $(OBJS))
+
+clean:
+	rm -f $(OBJS) $(SOBJS)
+
+distclean:	clean
+	rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/freescale/b4860qds/b4860qds.c b/board/freescale/b4860qds/b4860qds.c
new file mode 100644
index 0000000..41887c2
--- /dev/null
+++ b/board/freescale/b4860qds/b4860qds.c
@@ -0,0 +1,505 @@
+/*
+ * Copyright 2011-2012 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <command.h>
+#include <i2c.h>
+#include <netdev.h>
+#include <linux/compiler.h>
+#include <asm/mmu.h>
+#include <asm/processor.h>
+#include <asm/cache.h>
+#include <asm/immap_85xx.h>
+#include <asm/fsl_law.h>
+#include <asm/fsl_serdes.h>
+#include <asm/fsl_portals.h>
+#include <asm/fsl_liodn.h>
+#include <fm_eth.h>
+
+#include "../common/qixis.h"
+#include "../common/vsc3316_3308.h"
+#include "b4860qds.h"
+#include "b4860qds_qixis.h"
+#include "b4860qds_crossbar_con.h"
+
+#define CLK_MUX_SEL_MASK	0x4
+#define ETH_PHY_CLK_OUT		0x4
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int checkboard(void)
+{
+	char buf[64];
+	u8 sw;
+	struct cpu_type *cpu = gd->arch.cpu;
+	ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR;
+	unsigned int i;
+	static const char *const freq[] = {"100", "125", "156.25", "161.13",
+						"122.88", "122.88", "122.88"};
+	int clock;
+
+	printf("Board: %sQDS, ", cpu->name);
+	printf("Sys ID: 0x%02x, Sys Ver: 0x%02x, ",
+		QIXIS_READ(id), QIXIS_READ(arch));
+
+	sw = QIXIS_READ(brdcfg[0]);
+	sw = (sw & QIXIS_LBMAP_MASK) >> QIXIS_LBMAP_SHIFT;
+
+	if (sw < 0x8)
+		printf("vBank: %d\n", sw);
+	else if (sw >= 0x8 && sw <= 0xE)
+		puts("NAND\n");
+	else
+		printf("invalid setting of SW%u\n", QIXIS_LBMAP_SWITCH);
+
+	printf("FPGA: v%d (%s), build %d",
+		(int)QIXIS_READ(scver), qixis_read_tag(buf),
+		(int)qixis_read_minor());
+	/* the timestamp string contains "\n" at the end */
+	printf(" on %s", qixis_read_time(buf));
+
+	/* Display the RCW, so that no one gets confused as to what RCW
+	 * we're actually using for this boot.
+	 */
+	puts("Reset Configuration Word (RCW):");
+	for (i = 0; i < ARRAY_SIZE(gur->rcwsr); i++) {
+		u32 rcw = in_be32(&gur->rcwsr[i]);
+
+		if ((i % 4) == 0)
+			printf("\n       %08x:", i * 4);
+		printf(" %08x", rcw);
+	}
+	puts("\n");
+
+	/*
+	 * Display the actual SERDES reference clocks as configured by the
+	 * dip switches on the board.  Note that the SWx registers could
+	 * technically be set to force the reference clocks to match the
+	 * values that the SERDES expects (or vice versa).  For now, however,
+	 * we just display both values and hope the user notices when they
+	 * don't match.
+	 */
+	puts("SERDES Reference Clocks: ");
+	sw = QIXIS_READ(brdcfg[2]);
+	clock = (sw >> 5) & 7;
+	printf("Bank1=%sMHz ", freq[clock]);
+	sw = QIXIS_READ(brdcfg[4]);
+	clock = (sw >> 6) & 3;
+	printf("Bank2=%sMHz\n", freq[clock]);
+
+	return 0;
+}
+
+int select_i2c_ch_pca(u8 ch)
+{
+	int ret;
+
+	/* Selecting proper channel via PCA*/
+	ret = i2c_write(I2C_MUX_PCA_ADDR, 0x0, 1, &ch, 1);
+	if (ret) {
+		printf("PCA: failed to select proper channel.\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+int configure_vsc3316_3308(void)
+{
+	ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+	unsigned int num_vsc16_con, num_vsc08_con;
+	u32 serdes1_prtcl, serdes2_prtcl;
+	int ret;
+
+	serdes1_prtcl = in_be32(&gur->rcwsr[4]) &
+			FSL_CORENET2_RCWSR4_SRDS1_PRTCL;
+	if (!serdes1_prtcl) {
+		printf("SERDES1 is not enabled\n");
+		return 0;
+	}
+	serdes1_prtcl >>= FSL_CORENET2_RCWSR4_SRDS1_PRTCL_SHIFT;
+	debug("Using SERDES1 Protocol: 0x%x:\n", serdes1_prtcl);
+
+	serdes2_prtcl = in_be32(&gur->rcwsr[4]) &
+			FSL_CORENET2_RCWSR4_SRDS2_PRTCL;
+	if (!serdes2_prtcl) {
+		printf("SERDES2 is not enabled\n");
+		return 0;
+	}
+	serdes2_prtcl >>= FSL_CORENET2_RCWSR4_SRDS2_PRTCL_SHIFT;
+	debug("Using SERDES2 Protocol: 0x%x:\n", serdes2_prtcl);
+
+	switch (serdes1_prtcl) {
+	case 0x2a:
+	case 0x2C:
+	case 0x2D:
+	case 0x2E:
+			/*
+			 * Configuration:
+			 * SERDES: 1
+			 * Lanes: A,B: SGMII
+			 * Lanes: C,D,E,F,G,H: CPRI
+			 */
+		debug("Configuring crossbar to use onboard SGMII PHYs:"
+				"srds_prctl:%x\n", serdes1_prtcl);
+		num_vsc16_con = NUM_CON_VSC3316;
+		/* Configure VSC3316 crossbar switch */
+		ret = select_i2c_ch_pca(I2C_CH_VSC3316);
+		if (!ret) {
+			ret = vsc3316_config(VSC3316_TX_ADDRESS,
+					vsc16_tx_sgmii_lane_ab, num_vsc16_con);
+			if (ret)
+				return ret;
+			ret = vsc3316_config(VSC3316_RX_ADDRESS,
+					vsc16_rx_sgmii_lane_ab, num_vsc16_con);
+			if (ret)
+				return ret;
+		} else {
+			return ret;
+		}
+		break;
+
+#ifdef CONFIG_PPC_B4420
+	case 0x18:
+			/*
+			 * Configuration:
+			 * SERDES: 1
+			 * Lanes: A,B,C,D: SGMII
+			 * Lanes: E,F,G,H: CPRI
+			 */
+		debug("Configuring crossbar to use onboard SGMII PHYs:"
+				"srds_prctl:%x\n", serdes1_prtcl);
+		num_vsc16_con = NUM_CON_VSC3316;
+		/* Configure VSC3316 crossbar switch */
+		ret = select_i2c_ch_pca(I2C_CH_VSC3316);
+		if (!ret) {
+			ret = vsc3316_config(VSC3316_TX_ADDRESS,
+					vsc16_tx_sgmii_lane_cd, num_vsc16_con);
+			if (ret)
+				return ret;
+			ret = vsc3316_config(VSC3316_RX_ADDRESS,
+					vsc16_rx_sgmii_lane_cd, num_vsc16_con);
+			if (ret)
+				return ret;
+		} else {
+			return ret;
+		}
+		break;
+#endif
+
+	case 0x3E:
+	case 0x0D:
+	case 0x0E:
+	case 0x12:
+		num_vsc16_con = NUM_CON_VSC3316;
+		/* Configure VSC3316 crossbar switch */
+		ret = select_i2c_ch_pca(I2C_CH_VSC3316);
+		if (!ret) {
+			ret = vsc3316_config(VSC3316_TX_ADDRESS,
+					vsc16_tx_sfp, num_vsc16_con);
+			if (ret)
+				return ret;
+			ret = vsc3316_config(VSC3316_RX_ADDRESS,
+					vsc16_rx_sfp, num_vsc16_con);
+			if (ret)
+				return ret;
+		} else {
+			return ret;
+		}
+		break;
+	default:
+		printf("WARNING:VSC crossbars programming not supported for:%x"
+					" SerDes1 Protocol.\n", serdes1_prtcl);
+		return -1;
+	}
+
+	switch (serdes2_prtcl) {
+	case 0x9E:
+	case 0x9A:
+	case 0x98:
+	case 0xb2:
+	case 0x49:
+	case 0x4E:
+	case 0x8D:
+	case 0x7A:
+		num_vsc08_con = NUM_CON_VSC3308;
+		/* Configure VSC3308 crossbar switch */
+		ret = select_i2c_ch_pca(I2C_CH_VSC3308);
+		if (!ret) {
+			ret = vsc3308_config(VSC3308_TX_ADDRESS,
+					vsc08_tx_amc, num_vsc08_con);
+			if (ret)
+				return ret;
+			ret = vsc3308_config(VSC3308_RX_ADDRESS,
+					vsc08_rx_amc, num_vsc08_con);
+			if (ret)
+				return ret;
+		} else {
+			return ret;
+		}
+		break;
+	default:
+		printf("WARNING:VSC crossbars programming not supported for: %x"
+					" SerDes2 Protocol.\n", serdes2_prtcl);
+		return -1;
+	}
+
+	return 0;
+}
+
+int board_early_init_r(void)
+{
+	const unsigned int flashbase = CONFIG_SYS_FLASH_BASE;
+	const u8 flash_esel = find_tlb_idx((void *)flashbase, 1);
+
+	/*
+	 * Remap Boot flash + PROMJET region to caching-inhibited
+	 * so that flash can be erased properly.
+	 */
+
+	/* Flush d-cache and invalidate i-cache of any FLASH data */
+	flush_dcache();
+	invalidate_icache();
+
+	/* invalidate existing TLB entry for flash + promjet */
+	disable_tlb(flash_esel);
+
+	set_tlb(1, flashbase, CONFIG_SYS_FLASH_BASE_PHYS,
+			MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+			0, flash_esel, BOOKE_PAGESZ_256M, 1);
+
+	set_liodns();
+#ifdef CONFIG_SYS_DPAA_QBMAN
+	setup_portals();
+#endif
+
+	/* Configure VSC3316 and VSC3308 crossbar switches */
+	if (configure_vsc3316_3308())
+		printf("VSC:failed to configure VSC3316/3308.\n");
+	else
+		printf("VSC:VSC3316/3308 successfully configured.\n");
+
+	select_i2c_ch_pca(I2C_CH_DEFAULT);
+
+	return 0;
+}
+
+unsigned long get_board_sys_clk(void)
+{
+	u8 sysclk_conf = QIXIS_READ(brdcfg[1]);
+
+	switch ((sysclk_conf & 0x0C) >> 2) {
+	case QIXIS_CLK_100:
+		return 100000000;
+	case QIXIS_CLK_125:
+		return 125000000;
+	case QIXIS_CLK_133:
+		return 133333333;
+	}
+	return 66666666;
+}
+
+unsigned long get_board_ddr_clk(void)
+{
+	u8 ddrclk_conf = QIXIS_READ(brdcfg[1]);
+
+	switch (ddrclk_conf & 0x03) {
+	case QIXIS_CLK_100:
+		return 100000000;
+	case QIXIS_CLK_125:
+		return 125000000;
+	case QIXIS_CLK_133:
+		return 133333333;
+	}
+	return 66666666;
+}
+
+static int serdes_refclock(u8 sw, u8 sdclk)
+{
+	unsigned int clock;
+	int ret = -1;
+	u8 brdcfg4;
+
+	if (sdclk == 1) {
+		brdcfg4 = QIXIS_READ(brdcfg[4]);
+		if ((brdcfg4 & CLK_MUX_SEL_MASK) == ETH_PHY_CLK_OUT)
+			return SRDS_PLLCR0_RFCK_SEL_125;
+		else
+			clock = (sw >> 5) & 7;
+	} else
+		clock = (sw >> 6) & 3;
+
+	switch (clock) {
+	case 0:
+		ret = SRDS_PLLCR0_RFCK_SEL_100;
+		break;
+	case 1:
+		ret = SRDS_PLLCR0_RFCK_SEL_125;
+		break;
+	case 2:
+		ret = SRDS_PLLCR0_RFCK_SEL_156_25;
+		break;
+	case 3:
+		ret = SRDS_PLLCR0_RFCK_SEL_161_13;
+		break;
+	case 4:
+	case 5:
+	case 6:
+		ret = SRDS_PLLCR0_RFCK_SEL_122_88;
+		break;
+	default:
+		ret = -1;
+		break;
+	}
+
+	return ret;
+}
+
+static const char *serdes_clock_to_string(u32 clock)
+{
+	switch (clock) {
+	case SRDS_PLLCR0_RFCK_SEL_100:
+		return "100";
+	case SRDS_PLLCR0_RFCK_SEL_125:
+		return "125";
+	case SRDS_PLLCR0_RFCK_SEL_156_25:
+		return "156.25";
+	case SRDS_PLLCR0_RFCK_SEL_161_13:
+		return "161.13";
+	default:
+		return "122.88";
+	}
+}
+
+#define NUM_SRDS_BANKS	2
+
+int misc_init_r(void)
+{
+	u8 sw;
+	serdes_corenet_t *srds_regs =
+		(void *)CONFIG_SYS_FSL_CORENET_SERDES_ADDR;
+	u32 actual[NUM_SRDS_BANKS];
+	unsigned int i;
+	int clock;
+
+	sw = QIXIS_READ(brdcfg[2]);
+	clock = serdes_refclock(sw, 1);
+	if (clock >= 0)
+		actual[0] = clock;
+	else
+		printf("Warning: SDREFCLK1 switch setting is unsupported\n");
+
+	sw = QIXIS_READ(brdcfg[4]);
+	clock = serdes_refclock(sw, 2);
+	if (clock >= 0)
+		actual[1] = clock;
+	else
+		printf("Warning: SDREFCLK2 switch setting unsupported\n");
+
+	for (i = 0; i < NUM_SRDS_BANKS; i++) {
+		u32 pllcr0 = srds_regs->bank[i].pllcr0;
+		u32 expected = pllcr0 & SRDS_PLLCR0_RFCK_SEL_MASK;
+		if (expected != actual[i]) {
+			printf("Warning: SERDES bank %u expects reference clock"
+			       " %sMHz, but actual is %sMHz\n", i + 1,
+			       serdes_clock_to_string(expected),
+			       serdes_clock_to_string(actual[i]));
+		}
+	}
+
+	return 0;
+}
+
+void ft_board_setup(void *blob, bd_t *bd)
+{
+	phys_addr_t base;
+	phys_size_t size;
+
+	ft_cpu_setup(blob, bd);
+
+	base = getenv_bootm_low();
+	size = getenv_bootm_size();
+
+	fdt_fixup_memory(blob, (u64)base, (u64)size);
+
+#ifdef CONFIG_PCI
+	pci_of_setup(blob, bd);
+#endif
+
+	fdt_fixup_liodn(blob);
+
+#ifdef CONFIG_HAS_FSL_DR_USB
+	fdt_fixup_dr_usb(blob, bd);
+#endif
+
+#ifdef CONFIG_SYS_DPAA_FMAN
+	fdt_fixup_fman_ethernet(blob);
+	fdt_fixup_board_enet(blob);
+#endif
+}
+
+/*
+ * Dump board switch settings.
+ * The bits that cannot be read/sampled via some FPGA or some
+ * registers, they will be displayed as
+ * underscore in binary format. mask[] has those bits.
+ * Some bits are calculated differently than the actual switches
+ * if booting with overriding by FPGA.
+ */
+void qixis_dump_switch(void)
+{
+	int i;
+	u8 sw[5];
+
+	/*
+	 * Any bit with 1 means that bit cannot be reverse engineered.
+	 * It will be displayed as _ in binary format.
+	 */
+	static const u8 mask[] = {0x07, 0, 0, 0xff, 0};
+	char buf[10];
+	u8 brdcfg[16], dutcfg[16];
+
+	for (i = 0; i < 16; i++) {
+		brdcfg[i] = qixis_read(offsetof(struct qixis, brdcfg[0]) + i);
+		dutcfg[i] = qixis_read(offsetof(struct qixis, dutcfg[0]) + i);
+	}
+
+	sw[0] = ((brdcfg[0] & 0x0f) << 4)	| \
+		(brdcfg[9] & 0x08);
+	sw[1] = ((dutcfg[1] & 0x01) << 7)	| \
+		((dutcfg[2] & 0x07) << 4)       | \
+		((dutcfg[6] & 0x10) >> 1)       | \
+		((dutcfg[6] & 0x80) >> 5)       | \
+		((dutcfg[1] & 0x40) >> 5)       | \
+		(dutcfg[6] & 0x01);
+	sw[2] = dutcfg[0];
+	sw[3] = 0;
+	sw[4] = ((brdcfg[1] & 0x30) << 2)	| \
+		((brdcfg[1] & 0xc0) >> 2)	| \
+		(brdcfg[1] & 0x0f);
+
+	puts("DIP switch settings:\n");
+	for (i = 0; i < 5; i++) {
+		printf("SW%d         = 0b%s (0x%02x)\n",
+			i + 1, byte_to_binary_mask(sw[i], mask[i], buf), sw[i]);
+	}
+}
diff --git a/board/freescale/b4860qds/b4860qds.h b/board/freescale/b4860qds/b4860qds.h
new file mode 100644
index 0000000..f290f3c
--- /dev/null
+++ b/board/freescale/b4860qds/b4860qds.h
@@ -0,0 +1,26 @@
+/*
+ * Copyright 2011-2012 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CORENET_DS_H__
+#define __CORENET_DS_H__
+
+void fdt_fixup_board_enet(void *blob);
+void pci_of_setup(void *blob, bd_t *bd);
+
+#endif
diff --git a/board/freescale/b4860qds/b4860qds_crossbar_con.h b/board/freescale/b4860qds/b4860qds_crossbar_con.h
new file mode 100644
index 0000000..994dec5
--- /dev/null
+++ b/board/freescale/b4860qds/b4860qds_crossbar_con.h
@@ -0,0 +1,67 @@
+/*
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CROSSBAR_CONNECTIONS_H__
+#define __CROSSBAR_CONNECTIONS_H__
+
+#define NUM_CON_VSC3316	8
+#define NUM_CON_VSC3308	4
+
+static const int8_t vsc16_tx_amc[8][2] = { {15, 3}, {0, 2}, {7, 4}, {9, 10},
+				{5, 11}, {4, 5}, {2, 6}, {12, 9} };
+
+static const int8_t vsc16_tx_sfp[8][2] = { {15, 8}, {0, 0}, {7, 7}, {9, 1},
+				{5, 15}, {4, 14}, {2, 12}, {12, 13} };
+
+static const int8_t vsc16_tx_sgmii_lane_ab[8][2] = { {2, 14}, {12, 15},
+		{-1, -1}, {-1, -1}, {-1, -1}, {-1, -1}, {-1, -1}, {-1, -1} };
+
+#ifdef CONFIG_PPC_B4420
+static const int8_t vsc16_tx_sgmii_lane_cd[8][2] = { {5, 14}, {4, 15},
+		{-1, -1}, {-1, -1}, {-1, -1}, {-1, -1}, {-1, -1}, {-1, -1} };
+#endif
+static const int8_t vsc16_tx_aurora[8][2] = { {2, 13}, {12, 12}, {-1, -1},
+			{-1, -1}, {-1, -1}, {-1, -1}, {-1, -1}, {-1, -1} };
+
+static const int8_t vsc16_rx_amc[8][2] = { {3, 15}, {2, 1}, {4, 8}, {10, 9},
+				{11, 11}, {5, 10}, {6, 3}, {9, 12} };
+
+static const int8_t vsc16_rx_sfp[8][2] = { {0, 15}, {8, 1}, {1, 8}, {7, 9},
+				{-1, -1}, {-1, -1}, {-1, -1}, {-1, -1} };
+
+static const int8_t vsc16_rx_sgmii_lane_ab[8][2] = { {14, 3}, {15, 12},
+		{-1, -1}, {-1, -1}, {-1, -1}, {-1, -1}, {-1, -1}, {-1, -1} };
+
+#ifdef CONFIG_PPC_B4420
+static const int8_t vsc16_rx_sgmii_lane_cd[8][2] = { {14, 11}, {15, 10},
+		{-1, -1}, {-1, -1}, {-1, -1}, {-1, -1}, {-1, -1}, {-1, -1} };
+#endif
+
+static const int8_t vsc16_rx_aurora[8][2] = { {12, 3}, {13, 12}, {-1, -1},
+			{-1, -1}, {-1, -1}, {-1, -1}, {-1, -1}, {-1, -1} };
+
+static const int8_t vsc08_tx_amc[4][2] = { {2, 2}, {3, 3}, {7, 4}, {1, 5} };
+
+static const int8_t vsc08_tx_sfp[4][2] = { {2, 6}, {3, 7}, {7, 1}, {1, 0} };
+
+static const int8_t vsc08_rx_amc[4][2] = { {2, 3}, {3, 4}, {4, 7}, {5, 1} };
+
+static const int8_t vsc08_rx_sfp[4][2] = { {6, 3}, {7, 4}, {1, 7}, {0, 1} };
+
+#endif
diff --git a/board/freescale/b4860qds/b4860qds_qixis.h b/board/freescale/b4860qds/b4860qds_qixis.h
new file mode 100644
index 0000000..575b2ae
--- /dev/null
+++ b/board/freescale/b4860qds/b4860qds_qixis.h
@@ -0,0 +1,37 @@
+/*
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __B4860QDS_QIXIS_H__
+#define __B4860QDS_QIXIS_H__
+
+/* Definitions of QIXIS Registers for B4860QDS */
+
+/* BRDCFG4[4:7]] select EC1 and EC2 as a pair */
+#define BRDCFG4_EMISEL_MASK		0xE0
+#define BRDCFG4_EMISEL_SHIFT		5
+
+/* CLK */
+#define QIXIS_CLK_66		0x0
+#define QIXIS_CLK_100		0x1
+#define QIXIS_CLK_125		0x2
+#define QIXIS_CLK_133		0x3
+
+#define QIXIS_SRDS1CLK_122		0x5a
+#define QIXIS_SRDS1CLK_125		0x5e
+#endif
diff --git a/board/freescale/b4860qds/ddr.c b/board/freescale/b4860qds/ddr.c
new file mode 100644
index 0000000..dd4c0f6
--- /dev/null
+++ b/board/freescale/b4860qds/ddr.c
@@ -0,0 +1,190 @@
+/*
+ * Copyright 2011-2012 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * Version 2 or later as published by the Free Software Foundation.
+ */
+
+#include <common.h>
+#include <i2c.h>
+#include <hwconfig.h>
+#include <asm/mmu.h>
+#include <asm/fsl_ddr_sdram.h>
+#include <asm/fsl_ddr_dimm_params.h>
+#include <asm/fsl_law.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+dimm_params_t ddr_raw_timing = {
+	.n_ranks = 2,
+	.rank_density = 2147483648u,
+	.capacity = 4294967296u,
+	.primary_sdram_width = 64,
+	.ec_sdram_width = 8,
+	.registered_dimm = 0,
+	.mirrored_dimm = 1,
+	.n_row_addr = 15,
+	.n_col_addr = 10,
+	.n_banks_per_sdram_device = 8,
+	.edc_config = 2,	/* ECC */
+	.burst_lengths_bitmask = 0x0c,
+
+	.tCKmin_X_ps = 1071,
+	.caslat_X = 0x2fe << 4,	/* 5,6,7,8,9,10,11,13 */
+	.tAA_ps = 13910,
+	.tWR_ps = 15000,
+	.tRCD_ps = 13910,
+	.tRRD_ps = 6000,
+	.tRP_ps = 13910,
+	.tRAS_ps = 34000,
+	.tRC_ps = 48910,
+	.tRFC_ps = 260000,
+	.tWTR_ps = 7500,
+	.tRTP_ps = 7500,
+	.refresh_rate_ps = 7800000,
+	.tFAW_ps = 35000,
+};
+
+int fsl_ddr_get_dimm_params(dimm_params_t *pdimm,
+		unsigned int controller_number,
+		unsigned int dimm_number)
+{
+	const char dimm_model[] = "RAW timing DDR";
+
+	if ((controller_number == 0) && (dimm_number == 0)) {
+		memcpy(pdimm, &ddr_raw_timing, sizeof(dimm_params_t));
+		memset(pdimm->mpart, 0, sizeof(pdimm->mpart));
+		memcpy(pdimm->mpart, dimm_model, sizeof(dimm_model) - 1);
+	}
+
+	return 0;
+}
+
+struct board_specific_parameters {
+	u32 n_ranks;
+	u32 datarate_mhz_high;
+	u32 clk_adjust;
+	u32 wrlvl_start;
+	u32 wrlvl_ctl_2;
+	u32 wrlvl_ctl_3;
+	u32 cpo;
+	u32 write_data_delay;
+	u32 force_2T;
+};
+
+/*
+ * This table contains all valid speeds we want to override with board
+ * specific parameters. datarate_mhz_high values need to be in ascending order
+ * for each n_ranks group.
+ */
+static const struct board_specific_parameters udimm0[] = {
+	/*
+	 * memory controller 0
+	 *   num|  hi|  clk| wrlvl |   wrlvl   |  wrlvl | cpo  |wrdata|2T
+	 * ranks| mhz|adjst| start |   ctl2    |  ctl3  |      |delay |
+	 */
+	{2,  1350,    4,     7, 0x09080807, 0x07060607,   0xff,    2,  0},
+	{2,  1666,    4,     7, 0x09080806, 0x06050607,   0xff,    2,  0},
+	{2,  1900,    3,     7, 0x08070706, 0x06040507,   0xff,    2,  0},
+	{1,  1350,    4,     7, 0x09080807, 0x07060607,   0xff,    2,  0},
+	{1,  1700,    4,     7, 0x09080806, 0x06050607,   0xff,    2,  0},
+	{1,  1900,    3,     7, 0x08070706, 0x06040507,   0xff,    2,  0},
+	{}
+};
+
+static const struct board_specific_parameters *udimms[] = {
+	udimm0,
+};
+
+void fsl_ddr_board_options(memctl_options_t *popts,
+				dimm_params_t *pdimm,
+				unsigned int ctrl_num)
+{
+	const struct board_specific_parameters *pbsp, *pbsp_highest = NULL;
+	ulong ddr_freq;
+
+	if (ctrl_num > 2) {
+		printf("Not supported controller number %d\n", ctrl_num);
+		return;
+	}
+	if (!pdimm->n_ranks)
+		return;
+
+	pbsp = udimms[0];
+
+
+	/* Get clk_adjust, cpo, write_data_delay,2T, according to the board ddr
+	 * freqency and n_banks specified in board_specific_parameters table.
+	 */
+	ddr_freq = get_ddr_freq(0) / 1000000;
+	while (pbsp->datarate_mhz_high) {
+		if (pbsp->n_ranks == pdimm->n_ranks) {
+			if (ddr_freq <= pbsp->datarate_mhz_high) {
+				popts->cpo_override = pbsp->cpo;
+				popts->write_data_delay =
+					pbsp->write_data_delay;
+				popts->clk_adjust = pbsp->clk_adjust;
+				popts->wrlvl_start = pbsp->wrlvl_start;
+				popts->wrlvl_ctl_2 = pbsp->wrlvl_ctl_2;
+				popts->wrlvl_ctl_3 = pbsp->wrlvl_ctl_3;
+				popts->twoT_en = pbsp->force_2T;
+				goto found;
+			}
+			pbsp_highest = pbsp;
+		}
+		pbsp++;
+	}
+
+	if (pbsp_highest) {
+		printf("Error: board specific timing not found "
+			"for data rate %lu MT/s\n"
+			"Trying to use the highest speed (%u) parameters\n",
+			ddr_freq, pbsp_highest->datarate_mhz_high);
+		popts->cpo_override = pbsp_highest->cpo;
+		popts->write_data_delay = pbsp_highest->write_data_delay;
+		popts->clk_adjust = pbsp_highest->clk_adjust;
+		popts->wrlvl_start = pbsp_highest->wrlvl_start;
+		popts->twoT_en = pbsp_highest->force_2T;
+	} else {
+		panic("DIMM is not supported by this board");
+	}
+found:
+	/*
+	 * Factors to consider for half-strength driver enable:
+	 *	- number of DIMMs installed
+	 */
+	popts->half_strength_driver_enable = 0;
+	/*
+	 * Write leveling override
+	 */
+	popts->wrlvl_override = 1;
+	popts->wrlvl_sample = 0xf;
+
+	/*
+	 * Rtt and Rtt_WR override
+	 */
+	popts->rtt_override = 0;
+
+	/* Enable ZQ calibration */
+	popts->zq_en = 1;
+
+	/* DHC_EN =1, ODT = 75 Ohm */
+	popts->ddr_cdr1 = DDR_CDR1_DHC_EN | DDR_CDR1_ODT(DDR_CDR_ODT_75ohm);
+	popts->ddr_cdr2 = DDR_CDR2_ODT(DDR_CDR_ODT_75ohm);
+}
+
+phys_size_t initdram(int board_type)
+{
+	phys_size_t dram_size;
+
+	puts("Initializing....using SPD\n");
+
+	dram_size = fsl_ddr_sdram();
+
+	dram_size = setup_ddr_tlbs(dram_size / 0x100000);
+	dram_size *= 0x100000;
+
+	puts("    DDR: ");
+	return dram_size;
+}
diff --git a/board/freescale/b4860qds/eth_b4860qds.c b/board/freescale/b4860qds/eth_b4860qds.c
new file mode 100644
index 0000000..68e2725
--- /dev/null
+++ b/board/freescale/b4860qds/eth_b4860qds.c
@@ -0,0 +1,338 @@
+/*
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ * Author: Sandeep Kumar Singh <sandeep@freescale.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/* This file is based on board/freescale/corenet_ds/eth_superhydra.c */
+
+/*
+ * This file handles the board muxing between the Fman Ethernet MACs and
+ * the RGMII/SGMII/XGMII PHYs on a Freescale B4860 "Centaur". The SGMII
+ * PHYs are the two on-board 1Gb ports. There are no RGMII PHY on board.
+ * The 10Gb XGMII PHY is provided via the XAUI riser card. There is only
+ * one Fman device on B4860. The SERDES configuration is used to determine
+ * where the SGMII and XAUI cards exist, and also which Fman MACs are routed
+ * to which PHYs. So for a given Fman MAC, there is one and only PHY it
+ * connects to. MACs cannot be routed to PHYs dynamically. This configuration
+ * is done at boot time by reading SERDES protocol from RCW.
+ */
+
+#include <common.h>
+#include <netdev.h>
+#include <asm/fsl_serdes.h>
+#include <fm_eth.h>
+#include <fsl_mdio.h>
+#include <malloc.h>
+#include <fdt_support.h>
+#include <asm/fsl_dtsec.h>
+
+#include "../common/ngpixis.h"
+#include "../common/fman.h"
+#include "../common/qixis.h"
+#include "b4860qds_qixis.h"
+
+#define EMI_NONE       0xFFFFFFFF
+
+#ifdef CONFIG_FMAN_ENET
+
+/*
+ * Mapping of all 16 SERDES lanes to board slots. A value n(>0) will mean that
+ * lane at index is mapped to slot number n. A value of '0' will mean
+ * that the mapping must be determined dynamically, or that the lane maps to
+ * something other than a board slot
+ */
+static u8 lane_to_slot[] = {
+	0, 0, 0, 0,
+	0, 0, 0, 0,
+	1, 1, 1, 1,
+	0, 0, 0, 0
+};
+
+/*
+ * This function initializes the lane_to_slot[] array. It reads RCW to check
+ * if Serdes2{E,F,G,H} is configured as slot 2 or as SFP and initializes
+ * lane_to_slot[] accordingly
+ */
+static void initialize_lane_to_slot(void)
+{
+	unsigned int  serdes2_prtcl;
+	ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+	serdes2_prtcl = in_be32(&gur->rcwsr[4]) &
+		FSL_CORENET2_RCWSR4_SRDS2_PRTCL;
+	serdes2_prtcl >>= FSL_CORENET2_RCWSR4_SRDS2_PRTCL_SHIFT;
+	debug("Initializing lane to slot: Serdes2 protocol: %x\n",
+			serdes2_prtcl);
+
+	switch (serdes2_prtcl) {
+	case 0x18:
+		/*
+		 * Configuration:
+		 * SERDES: 2
+		 * Lanes: A,B,C,D: SGMII
+		 * Lanes: E,F: Aur
+		 * Lanes: G,H: SRIO
+		 */
+	case 0x91:
+		/*
+		 * Configuration:
+		 * SERDES: 2
+		 * Lanes: A,B: SGMII
+		 * Lanes: C,D: SRIO2
+		 * Lanes: E,F,G,H: XAUI2
+		 */
+	case 0x93:
+		/*
+		 * Configuration:
+		 * SERDES: 2
+		 * Lanes: A,B,C,D: SGMII
+		 * Lanes: E,F,G,H: XAUI2
+		 */
+	case 0x98:
+		/*
+		 * Configuration:
+		 * SERDES: 2
+		 * Lanes: A,B,C,D: XAUI2
+		 * Lanes: E,F,G,H: XAUI2
+		 */
+	case 0x9a:
+		/*
+		 * Configuration:
+		 * SERDES: 2
+		 * Lanes: A,B: PCI
+		 * Lanes: C,D: SGMII
+		 * Lanes: E,F,G,H: XAUI2
+		 */
+	case 0x9e:
+		/*
+		 * Configuration:
+		 * SERDES: 2
+		 * Lanes: A,B,C,D: PCI
+		 * Lanes: E,F,G,H: XAUI2
+		 */
+	case 0xb2:
+		/*
+		 * Configuration:
+		 * SERDES: 2
+		 * Lanes: A,B,C,D: PCI
+		 * Lanes: E,F: SGMII 3&4
+		 * Lanes: G,H: XFI
+		 */
+	case 0xc2:
+		/*
+		 * Configuration:
+		 * SERDES: 2
+		 * Lanes: A,B: SGMII
+		 * Lanes: C,D: SRIO2
+		 * Lanes: E,F,G,H: XAUI2
+		 */
+		lane_to_slot[12] = 2;
+		lane_to_slot[13] = lane_to_slot[12];
+		lane_to_slot[14] = lane_to_slot[12];
+		lane_to_slot[15] = lane_to_slot[12];
+		break;
+
+	default:
+		printf("Fman: Unsupported SerDes2 Protocol 0x%02x\n",
+				serdes2_prtcl);
+			break;
+	}
+	return;
+}
+
+#endif /* #ifdef CONFIG_FMAN_ENET */
+
+int board_eth_init(bd_t *bis)
+{
+#ifdef CONFIG_FMAN_ENET
+	struct memac_mdio_info memac_mdio_info;
+	struct memac_mdio_info tg_memac_mdio_info;
+	unsigned int i;
+	unsigned int  serdes1_prtcl, serdes2_prtcl;
+	ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+	serdes1_prtcl = in_be32(&gur->rcwsr[4]) &
+		FSL_CORENET2_RCWSR4_SRDS1_PRTCL;
+	if (!serdes1_prtcl) {
+		printf("SERDES1 is not enabled\n");
+		return 0;
+	}
+	serdes1_prtcl >>= FSL_CORENET2_RCWSR4_SRDS1_PRTCL_SHIFT;
+	debug("Using SERDES1 Protocol: 0x%x:\n", serdes1_prtcl);
+
+	serdes2_prtcl = in_be32(&gur->rcwsr[4]) &
+		FSL_CORENET2_RCWSR4_SRDS2_PRTCL;
+	if (!serdes2_prtcl) {
+		printf("SERDES2 is not enabled\n");
+		return 0;
+	}
+	serdes2_prtcl >>= FSL_CORENET2_RCWSR4_SRDS2_PRTCL_SHIFT;
+	debug("Using SERDES2 Protocol: 0x%x:\n", serdes2_prtcl);
+
+	printf("Initializing Fman\n");
+
+	initialize_lane_to_slot();
+
+	memac_mdio_info.regs =
+		(struct memac_mdio_controller *)CONFIG_SYS_FM1_DTSEC_MDIO_ADDR;
+	memac_mdio_info.name = DEFAULT_FM_MDIO_NAME;
+
+	/* Register the real 1G MDIO bus */
+	fm_memac_mdio_init(bis, &memac_mdio_info);
+
+	tg_memac_mdio_info.regs =
+		(struct memac_mdio_controller *)CONFIG_SYS_FM1_TGEC_MDIO_ADDR;
+	tg_memac_mdio_info.name = DEFAULT_FM_TGEC_MDIO_NAME;
+
+	/* Register the real 10G MDIO bus */
+	fm_memac_mdio_init(bis, &tg_memac_mdio_info);
+
+	/*
+	 * Program the two on board DTSEC PHY addresses assuming that they are
+	 * all SGMII. RGMII is not supported on this board. Setting SGMII 5 and
+	 * 6 to on board SGMII phys
+	 */
+	fm_info_set_phy_address(FM1_DTSEC5, CONFIG_SYS_FM1_DTSEC5_PHY_ADDR);
+	fm_info_set_phy_address(FM1_DTSEC6, CONFIG_SYS_FM1_DTSEC6_PHY_ADDR);
+
+	switch (serdes1_prtcl) {
+	case 0x2a:
+		/* Serdes 1: A-B SGMII, Configuring DTSEC 5 and 6 */
+		debug("Setting phy addresses for FM1_DTSEC5: %x and"
+			"FM1_DTSEC6: %x\n", CONFIG_SYS_FM1_DTSEC5_PHY_ADDR,
+			CONFIG_SYS_FM1_DTSEC6_PHY_ADDR);
+		/* Fixing Serdes clock by programming FPGA register */
+		QIXIS_WRITE(brdcfg[4], QIXIS_SRDS1CLK_125);
+		fm_info_set_phy_address(FM1_DTSEC5,
+				CONFIG_SYS_FM1_DTSEC5_PHY_ADDR);
+		fm_info_set_phy_address(FM1_DTSEC6,
+				CONFIG_SYS_FM1_DTSEC6_PHY_ADDR);
+		break;
+#ifdef CONFIG_PPC_B4420
+	case 0x18:
+		/* Serdes 1: A-D SGMII, Configuring on board dual SGMII Phy */
+		debug("Setting phy addresses for FM1_DTSEC3: %x and"
+			"FM1_DTSEC4: %x\n", CONFIG_SYS_FM1_DTSEC5_PHY_ADDR,
+			CONFIG_SYS_FM1_DTSEC6_PHY_ADDR);
+		/* Fixing Serdes clock by programming FPGA register */
+		QIXIS_WRITE(brdcfg[4], QIXIS_SRDS1CLK_125);
+		fm_info_set_phy_address(FM1_DTSEC3,
+				CONFIG_SYS_FM1_DTSEC5_PHY_ADDR);
+		fm_info_set_phy_address(FM1_DTSEC4,
+				CONFIG_SYS_FM1_DTSEC6_PHY_ADDR);
+		break;
+#endif
+	default:
+		printf("Fman:  Unsupported SerDes1 Protocol 0x%02x\n",
+				serdes1_prtcl);
+		break;
+	}
+	switch (serdes2_prtcl) {
+	case 0x18:
+		debug("Setting phy addresses on SGMII Riser card for"
+				"FM1_DTSEC ports: \n");
+		fm_info_set_phy_address(FM1_DTSEC1,
+				CONFIG_SYS_FM1_DTSEC1_RISER_PHY_ADDR);
+		fm_info_set_phy_address(FM1_DTSEC2,
+				CONFIG_SYS_FM1_DTSEC2_RISER_PHY_ADDR);
+		fm_info_set_phy_address(FM1_DTSEC3,
+				CONFIG_SYS_FM1_DTSEC3_RISER_PHY_ADDR);
+		fm_info_set_phy_address(FM1_DTSEC4,
+				CONFIG_SYS_FM1_DTSEC4_RISER_PHY_ADDR);
+		break;
+	case 0x49:
+		debug("Setting phy addresses on SGMII Riser card for"
+				"FM1_DTSEC ports: \n");
+		fm_info_set_phy_address(FM1_DTSEC1,
+				CONFIG_SYS_FM1_DTSEC1_RISER_PHY_ADDR);
+		fm_info_set_phy_address(FM1_DTSEC2,
+				CONFIG_SYS_FM1_DTSEC2_RISER_PHY_ADDR);
+		fm_info_set_phy_address(FM1_DTSEC3,
+				CONFIG_SYS_FM1_DTSEC3_RISER_PHY_ADDR);
+		break;
+	case 0x8d:
+	case 0xb2:
+		debug("Setting phy addresses on SGMII Riser card for"
+				"FM1_DTSEC ports: \n");
+		fm_info_set_phy_address(FM1_DTSEC3,
+				CONFIG_SYS_FM1_DTSEC1_RISER_PHY_ADDR);
+		fm_info_set_phy_address(FM1_DTSEC4,
+				CONFIG_SYS_FM1_DTSEC2_RISER_PHY_ADDR);
+		break;
+	default:
+		printf("Fman:  Unsupported SerDes2 Protocol 0x%02x\n",
+				serdes2_prtcl);
+		break;
+	}
+
+	for (i = FM1_DTSEC1; i < FM1_DTSEC1 + CONFIG_SYS_NUM_FM1_DTSEC; i++) {
+		int idx = i - FM1_DTSEC1;
+
+		switch (fm_info_get_enet_if(i)) {
+		case PHY_INTERFACE_MODE_SGMII:
+			fm_info_set_mdio(i,
+				miiphy_get_dev_by_name(DEFAULT_FM_MDIO_NAME));
+			break;
+		case PHY_INTERFACE_MODE_NONE:
+			fm_info_set_phy_address(i, 0);
+			break;
+		default:
+			printf("Fman1: DTSEC%u set to unknown interface %i\n",
+					idx + 1, fm_info_get_enet_if(i));
+			fm_info_set_phy_address(i, 0);
+			break;
+		}
+	}
+
+	cpu_eth_init(bis);
+#endif
+
+	return pci_eth_init(bis);
+}
+
+void board_ft_fman_fixup_port(void *fdt, char *compat, phys_addr_t addr,
+			      enum fm_port port, int offset)
+{
+	int phy;
+	char alias[32];
+
+	if (fm_info_get_enet_if(port) == PHY_INTERFACE_MODE_SGMII) {
+		phy = fm_info_get_phy_address(port);
+
+		sprintf(alias, "phy_sgmii_%x", phy);
+		fdt_set_phy_handle(fdt, compat, addr, alias);
+	}
+}
+
+void fdt_fixup_board_enet(void *fdt)
+{
+	int i;
+	char alias[32];
+
+	for (i = FM1_DTSEC1; i < FM1_DTSEC1 + CONFIG_SYS_NUM_FM1_DTSEC; i++) {
+		switch (fm_info_get_enet_if(i)) {
+		case PHY_INTERFACE_MODE_NONE:
+			sprintf(alias, "ethernet%u", i);
+			fdt_status_disabled_by_alias(fdt, alias);
+			break;
+		default:
+			break;
+		}
+	}
+}
diff --git a/board/freescale/b4860qds/law.c b/board/freescale/b4860qds/law.c
new file mode 100644
index 0000000..4142e01
--- /dev/null
+++ b/board/freescale/b4860qds/law.c
@@ -0,0 +1,44 @@
+/*
+ * Copyright 2011-2012 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/fsl_law.h>
+#include <asm/mmu.h>
+
+struct law_entry law_table[] = {
+	SET_LAW(CONFIG_SYS_FLASH_BASE_PHYS, LAW_SIZE_256M, LAW_TRGT_IF_IFC),
+#ifdef CONFIG_SYS_BMAN_MEM_PHYS
+	SET_LAW(CONFIG_SYS_BMAN_MEM_PHYS, LAW_SIZE_32M, LAW_TRGT_IF_BMAN),
+#endif
+#ifdef CONFIG_SYS_QMAN_MEM_PHYS
+	SET_LAW(CONFIG_SYS_QMAN_MEM_PHYS, LAW_SIZE_32M, LAW_TRGT_IF_QMAN),
+#endif
+	SET_LAW(QIXIS_BASE_PHYS, LAW_SIZE_4K, LAW_TRGT_IF_IFC),
+#ifdef CONFIG_SYS_DCSRBAR_PHYS
+	SET_LAW(CONFIG_SYS_DCSRBAR_PHYS, LAW_SIZE_4M, LAW_TRGT_IF_DCSR),
+#endif
+#ifdef CONFIG_SYS_NAND_BASE_PHYS
+	SET_LAW(CONFIG_SYS_NAND_BASE_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_IFC),
+#endif
+};
+
+int num_law_entries = ARRAY_SIZE(law_table);
diff --git a/board/qi/qi_lb60/u-boot.lds b/board/freescale/b4860qds/pci.c
index b3cb869..b130d13 100644
--- a/board/qi/qi_lb60/u-boot.lds
+++ b/board/freescale/b4860qds/pci.c
@@ -1,6 +1,8 @@
 /*
- * (C) Copyright 2006
- * Ingenic Semiconductor, <jlwei@ingenic.cn>
+ * Copyright 2011-2012 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License as
@@ -18,46 +20,20 @@
  * MA 02111-1307 USA
  */
 
-OUTPUT_FORMAT("elf32-tradlittlemips", "elf32-tradlittlemips", "elf32-tradlittlemips")
+#include <common.h>
+#include <command.h>
+#include <pci.h>
+#include <asm/fsl_pci.h>
+#include <libfdt.h>
+#include <fdt_support.h>
+#include <asm/fsl_serdes.h>
 
-OUTPUT_ARCH(mips)
-ENTRY(_start)
-SECTIONS
+void pci_init_board(void)
 {
-	. = 0x00000000;
-
-	. = ALIGN(4);
-	.text :
-	{
-	  *(.text*)
-	}
-
-	. = ALIGN(4);
-	.rodata  : { *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) }
-
-	. = ALIGN(4);
-	.data  : { *(.data*) }
-
-	. = .;
-	_gp = ALIGN(16) + 0x7ff0;
-
-	__got_start = .;
-	.got  : { *(.got) }
-	__got_end = .;
-
-	.sdata  : { *(.sdata*) }
-
-
-	. = ALIGN(4);
-	.u_boot_list : {
-	#include <u-boot.lst>
-	}
-
-	uboot_end_data = .;
-	num_got_entries = (__got_end - __got_start) >> 2;
+	fsl_pcie_init_board(0);
+}
 
-	. = ALIGN(4);
-	.sbss  : { *(.sbss*) }
-	.bss  : { *(.bss*) . = ALIGN(4); }
-	uboot_end = .;
+void pci_of_setup(void *blob, bd_t *bd)
+{
+	FT_FSL_PCI_SETUP;
 }
diff --git a/board/freescale/b4860qds/tlb.c b/board/freescale/b4860qds/tlb.c
new file mode 100644
index 0000000..373cb78
--- /dev/null
+++ b/board/freescale/b4860qds/tlb.c
@@ -0,0 +1,127 @@
+/*
+ * Copyright 2011-2012 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/mmu.h>
+
+struct fsl_e_tlb_entry tlb_table[] = {
+	/* TLB 0 - for temp stack in cache */
+	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR,
+		      CONFIG_SYS_INIT_RAM_ADDR_PHYS,
+		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
+		      0, 0, BOOKE_PAGESZ_4K, 0),
+	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024,
+		      CONFIG_SYS_INIT_RAM_ADDR_PHYS + 4 * 1024,
+		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
+		      0, 0, BOOKE_PAGESZ_4K, 0),
+	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024,
+		      CONFIG_SYS_INIT_RAM_ADDR_PHYS + 8 * 1024,
+		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
+		      0, 0, BOOKE_PAGESZ_4K, 0),
+	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024,
+		      CONFIG_SYS_INIT_RAM_ADDR_PHYS + 12 * 1024,
+		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
+		      0, 0, BOOKE_PAGESZ_4K, 0),
+
+	/* TLB 1 */
+	/* *I*** - Covers boot page */
+#if defined(CONFIG_SYS_RAMBOOT) && defined(CONFIG_SYS_INIT_L3_ADDR)
+	/*
+	 * *I*G - L3SRAM. When L3 is used as 1M SRAM, the address of the
+	 * SRAM is at 0xfff00000, it covered the 0xfffff000.
+	 */
+	SET_TLB_ENTRY(1, CONFIG_SYS_INIT_L3_ADDR, CONFIG_SYS_INIT_L3_ADDR,
+			MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+			0, 0, BOOKE_PAGESZ_1M, 1),
+#else
+	SET_TLB_ENTRY(1, 0xfffff000, 0xfffff000,
+		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+		      0, 0, BOOKE_PAGESZ_4K, 1),
+#endif
+
+	/* *I*G* - CCSRBAR */
+	SET_TLB_ENTRY(1, CONFIG_SYS_CCSRBAR, CONFIG_SYS_CCSRBAR_PHYS,
+		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+		      0, 1, BOOKE_PAGESZ_16M, 1),
+
+	/* *I*G* - Flash, localbus */
+	/* This will be changed to *I*G* after relocation to RAM. */
+	SET_TLB_ENTRY(1, CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE_PHYS,
+		      MAS3_SX|MAS3_SR, MAS2_W|MAS2_G,
+		      0, 2, BOOKE_PAGESZ_256M, 1),
+
+	/* *I*G* - PCI */
+	SET_TLB_ENTRY(1, CONFIG_SYS_PCIE1_MEM_VIRT, CONFIG_SYS_PCIE1_MEM_PHYS,
+		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+		      0, 3, BOOKE_PAGESZ_256M, 1),
+
+	SET_TLB_ENTRY(1, CONFIG_SYS_PCIE1_MEM_VIRT + 0x10000000,
+                      CONFIG_SYS_PCIE1_MEM_PHYS + 0x10000000,
+		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+		      0, 4, BOOKE_PAGESZ_256M, 1),
+
+	/* *I*G* - PCI I/O */
+	SET_TLB_ENTRY(1, CONFIG_SYS_PCIE1_IO_VIRT, CONFIG_SYS_PCIE1_IO_PHYS,
+		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+		      0, 5, BOOKE_PAGESZ_64K, 1),
+
+	/* Bman/Qman */
+#ifdef CONFIG_SYS_BMAN_MEM_PHYS
+	SET_TLB_ENTRY(1, CONFIG_SYS_BMAN_MEM_BASE, CONFIG_SYS_BMAN_MEM_PHYS,
+		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
+		      0, 6, BOOKE_PAGESZ_16M, 1),
+	SET_TLB_ENTRY(1, CONFIG_SYS_BMAN_MEM_BASE + 0x01000000,
+		      CONFIG_SYS_BMAN_MEM_PHYS + 0x01000000,
+		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+		      0, 7, BOOKE_PAGESZ_16M, 1),
+#endif
+#ifdef CONFIG_SYS_QMAN_MEM_PHYS
+	SET_TLB_ENTRY(1, CONFIG_SYS_QMAN_MEM_BASE, CONFIG_SYS_QMAN_MEM_PHYS,
+		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
+		      0, 8, BOOKE_PAGESZ_16M, 1),
+	SET_TLB_ENTRY(1, CONFIG_SYS_QMAN_MEM_BASE + 0x01000000,
+		      CONFIG_SYS_QMAN_MEM_PHYS + 0x01000000,
+		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+		      0, 9, BOOKE_PAGESZ_16M, 1),
+#endif
+#ifdef CONFIG_SYS_DCSRBAR_PHYS
+	SET_TLB_ENTRY(1, CONFIG_SYS_DCSRBAR, CONFIG_SYS_DCSRBAR_PHYS,
+		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+		      0, 10, BOOKE_PAGESZ_4M, 1),
+#endif
+#ifdef CONFIG_SYS_NAND_BASE
+	/*
+	 * *I*G - NAND
+	 * entry 14 and 15 has been used hard coded, they will be disabled
+	 * in cpu_init_f, so we use entry 16 for nand.
+	 */
+	SET_TLB_ENTRY(1, CONFIG_SYS_NAND_BASE, CONFIG_SYS_NAND_BASE_PHYS,
+			MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+			0, 11, BOOKE_PAGESZ_64K, 1),
+#endif
+	SET_TLB_ENTRY(1, QIXIS_BASE, QIXIS_BASE_PHYS,
+		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+		      0, 12, BOOKE_PAGESZ_4K, 1),
+
+};
+
+int num_tlb_entries = ARRAY_SIZE(tlb_table);
diff --git a/board/freescale/bsc9131rdb/bsc9131rdb.c b/board/freescale/bsc9131rdb/bsc9131rdb.c
index 2e0e55f..fe870b6 100644
--- a/board/freescale/bsc9131rdb/bsc9131rdb.c
+++ b/board/freescale/bsc9131rdb/bsc9131rdb.c
@@ -59,7 +59,7 @@ int checkboard(void)
 {
 	struct cpu_type *cpu;
 
-	cpu = gd->cpu;
+	cpu = gd->arch.cpu;
 	printf("Board: %sRDB\n", cpu->name);
 
 	return 0;
diff --git a/board/freescale/bsc9132qds/Makefile b/board/freescale/bsc9132qds/Makefile
new file mode 100644
index 0000000..267400b
--- /dev/null
+++ b/board/freescale/bsc9132qds/Makefile
@@ -0,0 +1,52 @@
+#
+# Copyright 2013 Freescale Semiconductor, Inc.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= $(obj)lib$(BOARD).o
+
+COBJS-y	+= $(BOARD).o
+COBJS-y	+= ddr.o
+COBJS-y	+= law.o
+COBJS-y	+= tlb.o
+
+SRCS	:= $(SOBJS:.o=.S) $(COBJS-y:.o=.c)
+OBJS	:= $(addprefix $(obj),$(COBJS-y))
+SOBJS	:= $(addprefix $(obj),$(SOBJS))
+
+$(LIB):	$(obj).depend $(OBJS) $(SOBJS)
+	$(call cmd_link_o_target, $(OBJS))
+
+clean:
+	rm -f $(OBJS) $(SOBJS)
+
+distclean:	clean
+	rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/freescale/bsc9132qds/README b/board/freescale/bsc9132qds/README
new file mode 100644
index 0000000..4a3dbfe
--- /dev/null
+++ b/board/freescale/bsc9132qds/README
@@ -0,0 +1,150 @@
+Overview
+--------
+ The BSC9132 is a highly integrated device that targets the evolving
+ Microcell, Picocell, and Enterprise-Femto base station market subsegments.
+
+ The BSC9132 device combines Power Architecture e500 and DSP StarCore SC3850
+ core technologies with MAPLE-B2P baseband acceleration processing elements
+ to address the need for a high performance, low cost, integrated solution
+ that handles all required processing layers without the need for an
+ external device except for an RF transceiver or, in a Micro base station
+ configuration, a host device that handles the L3/L4 and handover between
+ sectors.
+
+ The BSC9132 SoC includes the following function and features:
+    - Power Architecture subsystem including two e500 processors with
+	512-Kbyte shared L2 cache
+    - Two StarCore SC3850 DSP subsystems, each with a 512-Kbyte private L2
+	cache
+    - 32 Kbyte of shared M3 memory
+    - The Multi Accelerator Platform Engine for Pico BaseStation Baseband
+      Processing (MAPLE-B2P)
+    - Two DDR3/3L memory interfaces with 32-bit data width (40 bits including
+      ECC), up to 1333 MHz data rate
+    - Dedicated security engine featuring trusted boot
+    - Two DMA controllers
+         - OCNDMA with four bidirectional channels
+         - SysDMA with sixteen bidirectional channels
+    - Interfaces
+        - Four-lane SerDes PHY
+	    - PCI Express controller complies with the PEX Specification-Rev 2.0
+        - Two Common Public Radio Interface (CPRI) controller lanes
+	    - High-speed USB 2.0 host and device controller with ULPI interface
+        - Enhanced secure digital (SD/MMC) host controller (eSDHC)
+	    - Antenna interface controller (AIC), supporting four industry
+		standard JESD207/four custom ADI RF interfaces
+       - ADI lanes support both full duplex FDD support & half duplex TDD
+       - Universal Subscriber Identity Module (USIM) interface that
+	   facilitates communication to SIM cards or Eurochip pre-paid phone
+	   cards
+       - Two DUART, two eSPI, and two I2C controllers
+       - Integrated Flash memory controller (IFC)
+       - GPIO
+     - Sixteen 32-bit timers
+
+The SC3850 core subsystem consists of the following:
+ - 32 KB, 8-way, level 1 instruction cache (L1 ICache)
+ - 32 KB, 8-way, level 1 data cache (L1 DCache)
+ - 512 KB, 8-way, level 2 unified instruction/data cache (L2 cache/M2 memory)
+ - Memory management unit (MMU)
+ - Global interrupt controller ( GIC)
+ - Debug and profiling unit (DPU)
+ - Two 32-bit quad timers
+
+BSC9132QDS board Overview
+-------------------------
+ 2Gbyte DDR3 (on board DDR), Dual Ranki
+ 32Mbyte 16bit NOR flash
+ 128Mbyte 2K page size NAND Flash
+ 256 Kbit M24256 I2C EEPROM
+ 128 Mbit SPI Flash memory
+ SD slot
+ USB-ULPI
+ eTSEC1: Connected to SGMII PHY
+ eTSEC2: Connected to SGMII PHY
+ PCIe
+ CPRI
+ SerDes
+ I2C RTC
+ DUART interface: supports one UARTs up to 115200 bps for console display
+
+Frequency Combinations Supported
+--------------------------------
+Core MHz/CCB MHz/DDR(MT/s)
+1. CPU0/CPU1/CCB/DDR: 1000MHz/1000MHz/500MHz/800MHz
+     (SYSCLK = 100MHz, DDRCLK = 100MHz)
+2. CPU0/CPU1/CCB/DDR: 1200MHz/1200MHz/600MHz/1330MHz
+     (SYSCLK = 100MHz, DDRCLK = 133MHz)
+
+Boot Methods Supported
+-----------------------
+1. NOR Flash
+2. NAND Flash
+3. SD Card
+4. SPI flash
+
+Default Boot Method
+--------------------
+NOR boot
+
+Building U-boot
+--------------
+To build the u-boot for BSC9132QDS:
+1. NOR Flash
+	make BSC9132QDS_NOR_DDRCLK100 : For 100MHZ DDR CLK
+	make BSC9132QDS_NOR_DDRCLK133 : For 133MHZ DDR CLK
+2. NAND Flash : It is currently not supported
+3. SPI Flash
+	make BSC9132QDS_SPIFLASH_DDRCLK100 : For 100MHZ DDR CLK
+	make BSC9132QDS_SPIFLASH_DDRCLK133 : For 133MHZ DDR CLK
+4. SD Card
+	make BSC9132QDS_SDCARD_DDRCLK100 : For 100MHZ DDR CLK
+	make BSC9132QDS_SDCARD_DDRCLK133 : For 133MHZ DDR CLK
+
+Memory map
+-----------
+ 0x0000_0000	0x7FFF_FFFF	DDR			2G cacheable
+ 0x8000_0000	0x8FFF_FFFF	NOR Flash		256M
+ 0x9000_0000	0x9FFF_FFFF	PCIe Memory 		256M
+ 0xA000_0000	0xA7FF_FFFF	DSP core1 L2 space	128M
+ 0xB000_0000	0xB0FF_FFFF	DSP core0 M2 space	16M
+ 0xB100_0000	0xB1FF_FFFF	DSP core1 M2 space	16M
+ 0xC000_0000	0xC000_7FFF	M3 Memory		32K
+ 0xC001_0000	0xC001_FFFF	PCI Express I/O		64K
+ 0xC100_0000	0xC13F_FFFF	MAPLE-2F		4M
+ 0xC1F0_0000	0xC1F7_FFFF	PA SRAM Region 0	512K
+ 0xC1F8_0000	0xC1FB_FFFF	PA SRAM Region 1	512K
+ 0xFED0_0000	0xFED0_3FFF	SEC Secured RAM		16K
+ 0xFEE0_0000	0xFEE0_0FFF	DSP Boot ROM		4K
+ 0xFF60_0000	0xFF6F_FFFF 	DSP CCSR		1M
+ 0xFF70_0000	0xFF7F_FFFF	PA CCSR			1M
+ 0xFF80_0000	0xFFFF_FFFF	Boot Page & NAND Buffer 8M
+
+Flashing Images
+---------------
+To place a new u-boot image in the NAND flash and then boot
+with that new image temporarily, use this:
+	tftp 1000000 u-boot-nand.bin
+	nand erase 0 100000
+	nand write 1000000 0 100000
+	reset
+
+Using the Device Tree Source File
+---------------------------------
+To create the DTB (Device Tree Binary) image file,
+use a command similar to this:
+
+	dtc -b 0 -f -I dts -O dtb bsc9132qds.dts > bsc9132qds.dtb
+
+Likely, that .dts file will come from here;
+
+	linux-2.6/arch/powerpc/boot/dts/bsc9132qds.dts
+
+Booting Linux
+-------------
+Place a linux uImage in the TFTP disk area.
+
+	tftp 1000000 uImage
+	tftp 2000000 rootfs.ext2.gz.uboot
+	tftp c00000 bsc9132qds.dtb
+	bootm 1000000 2000000 c00000
diff --git a/board/freescale/bsc9132qds/bsc9132qds.c b/board/freescale/bsc9132qds/bsc9132qds.c
new file mode 100644
index 0000000..6e1b558
--- /dev/null
+++ b/board/freescale/bsc9132qds/bsc9132qds.c
@@ -0,0 +1,403 @@
+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/processor.h>
+#include <asm/mmu.h>
+#include <asm/cache.h>
+#include <asm/immap_85xx.h>
+#include <asm/io.h>
+#include <miiphy.h>
+#include <libfdt.h>
+#include <fdt_support.h>
+#include <fsl_mdio.h>
+#include <tsec.h>
+#include <mmc.h>
+#include <netdev.h>
+#include <asm/fsl_ifc.h>
+#include <hwconfig.h>
+#include <i2c.h>
+#include <asm/fsl_ddr_sdram.h>
+
+#ifdef CONFIG_PCI
+#include <pci.h>
+#include <asm/fsl_pci.h>
+#endif
+
+#include "../common/qixis.h"
+DECLARE_GLOBAL_DATA_PTR;
+
+
+int board_early_init_f(void)
+{
+	struct fsl_ifc *ifc = (void *)CONFIG_SYS_IFC_ADDR;
+
+	setbits_be32(&ifc->ifc_gcr, 1 << IFC_GCR_TBCTL_TRN_TIME_SHIFT);
+
+	return 0;
+}
+
+void board_config_serdes_mux(void)
+{
+	ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+	u32 pordevsr = in_be32(&gur->pordevsr);
+	u32 srds_cfg = (pordevsr & MPC85xx_PORDEVSR_IO_SEL) >>
+				MPC85xx_PORDEVSR_IO_SEL_SHIFT;
+
+	switch (srds_cfg) {
+	/* PEX(1) PEX(2) CPRI 2 CPRI 1 */
+	case  1:
+	case  2:
+	case  3:
+	case  4:
+	case  5:
+	case 22:
+	case 23:
+	case 24:
+	case 25:
+	case 26:
+		QIXIS_WRITE_I2C(brdcfg[4], 0x03);
+		break;
+
+	/* PEX(1) PEX(2) SGMII1 CPRI 1 */
+	case  6:
+	case  7:
+	case  8:
+	case  9:
+	case 10:
+	case 27:
+	case 28:
+	case 29:
+	case 30:
+	case 31:
+		QIXIS_WRITE_I2C(brdcfg[4], 0x01);
+		break;
+
+	/* PEX(1) PEX(2) SGMII1 SGMII2 */
+	case 11:
+	case 32:
+		QIXIS_WRITE_I2C(brdcfg[4], 0x00);
+		break;
+
+	/* PEX(1) SGMII2 CPRI 2 CPRI 1 */
+	case 12:
+	case 13:
+	case 14:
+	case 15:
+	case 16:
+	case 33:
+	case 34:
+	case 35:
+	case 36:
+	case 37:
+		QIXIS_WRITE_I2C(brdcfg[4], 0x07);
+		break;
+
+	/* PEX(1) SGMII2 SGMII1 CPRI 1 */
+	case 17:
+	case 18:
+	case 19:
+	case 20:
+	case 21:
+	case 38:
+	case 39:
+	case 40:
+	case 41:
+	case 42:
+		QIXIS_WRITE_I2C(brdcfg[4], 0x05);
+		break;
+
+	/* SGMII1 SGMII2 CPRI 2 CPRI 1 */
+	case 43:
+	case 44:
+	case 45:
+	case 46:
+	case 47:
+		QIXIS_WRITE_I2C(brdcfg[4], 0x0F);
+		break;
+
+
+	default:
+		break;
+	}
+}
+
+int board_early_init_r(void)
+{
+#ifndef CONFIG_SYS_NO_FLASH
+	const unsigned int flashbase = CONFIG_SYS_FLASH_BASE;
+	const u8 flash_esel = find_tlb_idx((void *)flashbase, 1);
+
+	/*
+	 * Remap Boot flash region to caching-inhibited
+	 * so that flash can be erased properly.
+	 */
+
+	/* Flush d-cache and invalidate i-cache of any FLASH data */
+	flush_dcache();
+	invalidate_icache();
+
+	/* invalidate existing TLB entry for flash */
+	disable_tlb(flash_esel);
+
+	set_tlb(1, flashbase, CONFIG_SYS_FLASH_BASE_PHYS,
+			MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+			0, flash_esel, BOOKE_PAGESZ_64M, 1);
+
+	set_tlb(1, flashbase + 0x4000000,
+			CONFIG_SYS_FLASH_BASE_PHYS + 0x4000000,
+			MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+			0, flash_esel+1, BOOKE_PAGESZ_64M, 1);
+#endif
+	board_config_serdes_mux();
+	return 0;
+}
+
+#ifdef CONFIG_PCI
+void pci_init_board(void)
+{
+	fsl_pcie_init_board(0);
+}
+#endif /* ifdef CONFIG_PCI */
+
+int checkboard(void)
+{
+	struct cpu_type *cpu;
+	u8 sw;
+
+	cpu = gd->arch.cpu;
+	printf("Board: %sQDS\n", cpu->name);
+
+	printf("Sys ID: 0x%02x, Sys Ver: 0x%02x, FPGA Ver: 0x%02x,\n",
+	QIXIS_READ(id), QIXIS_READ(arch), QIXIS_READ(scver));
+
+	sw = QIXIS_READ(brdcfg[0]);
+	sw = (sw & QIXIS_LBMAP_MASK) >> QIXIS_LBMAP_SHIFT;
+
+	printf("IFC chip select:");
+	switch (sw) {
+	case 0:
+		printf("NOR\n");
+		break;
+	case 2:
+		printf("Promjet\n");
+		break;
+	case 4:
+		printf("NAND\n");
+		break;
+	default:
+		printf("Invalid setting of SW%u\n", QIXIS_LBMAP_SWITCH);
+		break;
+	}
+
+	return 0;
+}
+
+#ifdef CONFIG_TSEC_ENET
+int board_eth_init(bd_t *bis)
+{
+	struct fsl_pq_mdio_info mdio_info;
+	struct tsec_info_struct tsec_info[4];
+	int num = 0;
+
+#ifdef CONFIG_TSEC1
+	SET_STD_TSEC_INFO(tsec_info[num], 1);
+	num++;
+
+#endif
+
+#ifdef CONFIG_TSEC2
+	SET_STD_TSEC_INFO(tsec_info[num], 2);
+	num++;
+#endif
+
+	mdio_info.regs = (struct tsec_mii_mng *)CONFIG_SYS_MDIO_BASE_ADDR;
+	mdio_info.name = DEFAULT_MII_NAME;
+
+	fsl_pq_mdio_init(bis, &mdio_info);
+	tsec_eth_init(bis, tsec_info, num);
+
+	#ifdef CONFIG_PCI
+	pci_eth_init(bis);
+	#endif
+
+	return 0;
+}
+#endif
+
+#define USBMUX_SEL_MASK		0xc0
+#define USBMUX_SEL_UART2	0xc0
+#define USBMUX_SEL_USB		0x40
+#define SPIMUX_SEL_UART3	0x80
+#define GPS_MUX_SEL_GPS		0x40
+
+#define TSEC_1588_CLKIN_MASK	0x03
+#define CON_XCVR_REF_CLK	0x00
+
+int misc_init_r(void)
+{
+	u8 val;
+	ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+	u32 porbmsr = in_be32(&gur->porbmsr);
+	u32 romloc = (porbmsr >> MPC85XX_PORBMSR_ROMLOC_SHIFT) & 0xf;
+
+	/*Configure 1588 clock-in source from RF Card*/
+	val = QIXIS_READ_I2C(brdcfg[5]);
+	QIXIS_WRITE_I2C(brdcfg[5],
+		(val & ~(TSEC_1588_CLKIN_MASK)) | CON_XCVR_REF_CLK);
+
+	if (hwconfig("uart2") && hwconfig("usb1")) {
+		printf("UART2 and USB cannot work together on the board\n");
+		printf("Remove one from hwconfig and reset\n");
+	} else {
+		if (hwconfig("uart2")) {
+			val = QIXIS_READ_I2C(brdcfg[5]);
+			QIXIS_WRITE_I2C(brdcfg[5],
+				(val & ~(USBMUX_SEL_MASK)) | USBMUX_SEL_UART2);
+			clrbits_be32(&gur->pmuxcr3,
+						MPC85xx_PMUXCR3_USB_SEL_MASK);
+			setbits_be32(&gur->pmuxcr3, MPC85xx_PMUXCR3_UART2_SEL);
+		} else {
+			/* By default USB should be selected.
+			* Programming FPGA to select USB. */
+			val = QIXIS_READ_I2C(brdcfg[5]);
+			QIXIS_WRITE_I2C(brdcfg[5],
+				(val & ~(USBMUX_SEL_MASK)) | USBMUX_SEL_USB);
+		}
+
+	}
+
+	if (hwconfig("sim")) {
+		if (romloc == PORBMSR_ROMLOC_NAND_2K ||
+			romloc == PORBMSR_ROMLOC_NOR ||
+			romloc == PORBMSR_ROMLOC_SPI) {
+
+			val = QIXIS_READ_I2C(brdcfg[3]);
+			QIXIS_WRITE_I2C(brdcfg[3], val|0x10);
+			clrbits_be32(&gur->pmuxcr,
+				MPC85xx_PMUXCR0_SIM_SEL_MASK);
+			setbits_be32(&gur->pmuxcr, MPC85xx_PMUXCR0_SIM_SEL);
+		}
+	}
+
+	if (hwconfig("uart3")) {
+		if (romloc == PORBMSR_ROMLOC_NAND_2K ||
+			romloc == PORBMSR_ROMLOC_NOR ||
+			romloc == PORBMSR_ROMLOC_SDHC) {
+
+			/* UART3 and SPI1 (Flashes) are muxed together */
+			val = QIXIS_READ_I2C(brdcfg[3]);
+			QIXIS_WRITE_I2C(brdcfg[3], (val | SPIMUX_SEL_UART3));
+			clrbits_be32(&gur->pmuxcr3,
+						MPC85xx_PMUXCR3_UART3_SEL_MASK);
+			setbits_be32(&gur->pmuxcr3, MPC85xx_PMUXCR3_UART3_SEL);
+
+			/* MUX to select UART3 connection to J24 header
+			 * or to GPS */
+			val = QIXIS_READ_I2C(brdcfg[6]);
+			if (hwconfig("gps"))
+				QIXIS_WRITE_I2C(brdcfg[6],
+						(val | GPS_MUX_SEL_GPS));
+			else
+				QIXIS_WRITE_I2C(brdcfg[6],
+						(val & ~(GPS_MUX_SEL_GPS)));
+		}
+	}
+	return 0;
+}
+
+void fdt_del_node_compat(void *blob, const char *compatible)
+{
+	int err;
+	int off = fdt_node_offset_by_compatible(blob, -1, compatible);
+	if (off < 0) {
+		printf("WARNING: could not find compatible node %s: %s.\n",
+			compatible, fdt_strerror(off));
+		return;
+	}
+	err = fdt_del_node(blob, off);
+	if (err < 0) {
+		printf("WARNING: could not remove %s: %s.\n",
+			compatible, fdt_strerror(err));
+	}
+}
+
+#if defined(CONFIG_OF_BOARD_SETUP)
+void ft_board_setup(void *blob, bd_t *bd)
+{
+	phys_addr_t base;
+	phys_size_t size;
+
+	ft_cpu_setup(blob, bd);
+
+	base = getenv_bootm_low();
+	size = getenv_bootm_size();
+
+	#if defined(CONFIG_PCI)
+	FT_FSL_PCI_SETUP;
+	#endif
+
+	fdt_fixup_memory(blob, (u64)base, (u64)size);
+
+	ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+	u32 porbmsr = in_be32(&gur->porbmsr);
+	u32 romloc = (porbmsr >> MPC85XX_PORBMSR_ROMLOC_SHIFT) & 0xf;
+
+	if (!(hwconfig("uart2") && hwconfig("usb1"))) {
+		/* If uart2 is there in hwconfig remove usb node from
+		 *  device tree */
+
+		if (hwconfig("uart2")) {
+			/* remove dts usb node */
+			fdt_del_node_compat(blob, "fsl-usb2-dr");
+		} else {
+			fdt_fixup_dr_usb(blob, bd);
+			fdt_del_node_and_alias(blob, "serial2");
+		}
+	}
+
+	if (hwconfig("uart3")) {
+		if (romloc == PORBMSR_ROMLOC_NAND_2K ||
+			romloc == PORBMSR_ROMLOC_NOR ||
+			romloc == PORBMSR_ROMLOC_SDHC)
+			/* Delete SPI node from the device tree */
+				fdt_del_node_and_alias(blob, "spi1");
+	} else
+		fdt_del_node_and_alias(blob, "serial3");
+
+	if (hwconfig("sim")) {
+		if (romloc == PORBMSR_ROMLOC_NAND_2K ||
+			romloc == PORBMSR_ROMLOC_NOR ||
+			romloc == PORBMSR_ROMLOC_SPI) {
+
+			/* remove dts sdhc node */
+			fdt_del_node_compat(blob, "fsl,esdhc");
+		} else if (romloc == PORBMSR_ROMLOC_SDHC) {
+
+			/* remove dts sim node */
+			fdt_del_node_compat(blob, "fsl,sim-v1.0");
+			printf("SIM & SDHC can't work together on the board");
+			printf("\nRemove sim from hwconfig and reset\n");
+		}
+	}
+}
+#endif
diff --git a/board/freescale/bsc9132qds/ddr.c b/board/freescale/bsc9132qds/ddr.c
new file mode 100644
index 0000000..946ad19
--- /dev/null
+++ b/board/freescale/bsc9132qds/ddr.c
@@ -0,0 +1,209 @@
+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/mmu.h>
+#include <asm/immap_85xx.h>
+#include <asm/processor.h>
+#include <asm/fsl_ddr_sdram.h>
+#include <asm/fsl_ddr_dimm_params.h>
+#include <asm/io.h>
+#include <asm/fsl_law.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#ifndef CONFIG_SYS_DDR_RAW_TIMING
+
+fsl_ddr_cfg_regs_t ddr_cfg_regs_800 = {
+	.cs[0].bnds = CONFIG_SYS_DDR_CS0_BNDS,
+	.cs[0].config = CONFIG_SYS_DDR_CS0_CONFIG,
+	.cs[0].config_2 = CONFIG_SYS_DDR_CS0_CONFIG_2,
+	.timing_cfg_3 = CONFIG_SYS_DDR_TIMING_3_800,
+	.timing_cfg_0 = CONFIG_SYS_DDR_TIMING_0_800,
+	.timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1_800,
+	.timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2_800,
+	.ddr_sdram_cfg = CONFIG_SYS_DDR_CONTROL,
+	.ddr_sdram_cfg_2 = CONFIG_SYS_DDR_CONTROL_2,
+	.ddr_sdram_mode = CONFIG_SYS_DDR_MODE_1_800,
+	.ddr_sdram_mode_2 = CONFIG_SYS_DDR_MODE_2_800,
+	.ddr_sdram_md_cntl = CONFIG_SYS_DDR_MODE_CONTROL,
+	.ddr_sdram_interval = CONFIG_SYS_DDR_INTERVAL_800,
+	.ddr_data_init = CONFIG_MEM_INIT_VALUE,
+	.ddr_sdram_clk_cntl = CONFIG_SYS_DDR_CLK_CTRL_800,
+	.ddr_init_addr = CONFIG_SYS_DDR_INIT_ADDR,
+	.ddr_init_ext_addr = CONFIG_SYS_DDR_INIT_EXT_ADDR,
+	.timing_cfg_4 = CONFIG_SYS_DDR_TIMING_4,
+	.timing_cfg_5 = CONFIG_SYS_DDR_TIMING_5,
+	.ddr_zq_cntl = CONFIG_SYS_DDR_ZQ_CONTROL,
+	.ddr_wrlvl_cntl = CONFIG_SYS_DDR_WRLVL_CONTROL_800,
+	.ddr_sr_cntr = CONFIG_SYS_DDR_SR_CNTR,
+	.ddr_sdram_rcw_1 = CONFIG_SYS_DDR_RCW_1,
+	.ddr_sdram_rcw_2 = CONFIG_SYS_DDR_RCW_2
+};
+
+fsl_ddr_cfg_regs_t ddr_cfg_regs_1333 = {
+	.cs[0].bnds = CONFIG_SYS_DDR_CS0_BNDS,
+	.cs[0].config = CONFIG_SYS_DDR_CS0_CONFIG,
+	.cs[0].config_2 = CONFIG_SYS_DDR_CS0_CONFIG_2,
+	.timing_cfg_3 = CONFIG_SYS_DDR_TIMING_3_1333,
+	.timing_cfg_0 = CONFIG_SYS_DDR_TIMING_0_1333,
+	.timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1_1333,
+	.timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2_1333,
+	.ddr_sdram_cfg = CONFIG_SYS_DDR_CONTROL,
+	.ddr_sdram_cfg_2 = CONFIG_SYS_DDR_CONTROL_2,
+	.ddr_sdram_mode = CONFIG_SYS_DDR_MODE_1_1333,
+	.ddr_sdram_mode_2 = CONFIG_SYS_DDR_MODE_2_1333,
+	.ddr_sdram_md_cntl = CONFIG_SYS_DDR_MODE_CONTROL,
+	.ddr_sdram_interval = CONFIG_SYS_DDR_INTERVAL_1333,
+	.ddr_data_init = CONFIG_MEM_INIT_VALUE,
+	.ddr_sdram_clk_cntl = CONFIG_SYS_DDR_CLK_CTRL_1333,
+	.ddr_init_addr = CONFIG_SYS_DDR_INIT_ADDR,
+	.ddr_init_ext_addr = CONFIG_SYS_DDR_INIT_EXT_ADDR,
+	.timing_cfg_4 = CONFIG_SYS_DDR_TIMING_4,
+	.timing_cfg_5 = CONFIG_SYS_DDR_TIMING_5,
+	.ddr_zq_cntl = CONFIG_SYS_DDR_ZQ_CONTROL,
+	.ddr_wrlvl_cntl = CONFIG_SYS_DDR_WRLVL_CONTROL_1333,
+	.ddr_sr_cntr = CONFIG_SYS_DDR_SR_CNTR,
+	.ddr_sdram_rcw_1 = CONFIG_SYS_DDR_RCW_1,
+	.ddr_sdram_rcw_2 = CONFIG_SYS_DDR_RCW_2
+};
+
+
+fixed_ddr_parm_t fixed_ddr_parm_0[] = {
+	{750, 850, &ddr_cfg_regs_800},
+	{1060, 1333, &ddr_cfg_regs_1333},
+	{0, 0, NULL}
+};
+
+/*
+ * Fixed sdram init -- doesn't use serial presence detect.
+ */
+phys_size_t fixed_sdram(void)
+{
+	int i;
+	char buf[32];
+	fsl_ddr_cfg_regs_t ddr_cfg_regs;
+	phys_size_t ddr_size;
+	ulong ddr_freq, ddr_freq_mhz;
+
+	ddr_freq = get_ddr_freq(0);
+	ddr_freq_mhz = ddr_freq / 1000000;
+
+	printf("Configuring DDR for %s MT/s data rate\n",
+				strmhz(buf, ddr_freq));
+
+	for (i = 0; fixed_ddr_parm_0[i].max_freq > 0; i++) {
+		if ((ddr_freq_mhz > fixed_ddr_parm_0[i].min_freq) &&
+		   (ddr_freq_mhz <= fixed_ddr_parm_0[i].max_freq)) {
+			memcpy(&ddr_cfg_regs, fixed_ddr_parm_0[i].ddr_settings,
+							sizeof(ddr_cfg_regs));
+			break;
+		}
+	}
+
+	if (fixed_ddr_parm_0[i].max_freq == 0)
+		panic("Unsupported DDR data rate %s MT/s data rate\n",
+					strmhz(buf, ddr_freq));
+
+	ddr_size = (phys_size_t) CONFIG_SYS_SDRAM_SIZE * 1024 * 1024;
+	fsl_ddr_set_memctl_regs(&ddr_cfg_regs, 0);
+
+	if (set_ddr_laws(CONFIG_SYS_DDR_SDRAM_BASE, ddr_size,
+					LAW_TRGT_IF_DDR_1) < 0) {
+		printf("ERROR setting Local Access Windows for DDR\n");
+		return 0;
+	}
+
+	return ddr_size;
+}
+
+#else /* CONFIG_SYS_DDR_RAW_TIMING */
+/* Micron MT41J512M8_187E */
+dimm_params_t ddr_raw_timing = {
+	.n_ranks = 1,
+	.rank_density = 1073741824u,
+	.capacity = 1073741824u,
+	.primary_sdram_width = 32,
+	.ec_sdram_width = 0,
+	.registered_dimm = 0,
+	.mirrored_dimm = 0,
+	.n_row_addr = 15,
+	.n_col_addr = 10,
+	.n_banks_per_sdram_device = 8,
+	.edc_config = 0,
+	.burst_lengths_bitmask = 0x0c,
+
+	.tCKmin_X_ps = 1870,
+	.caslat_X = 0x1e << 4,	/* 5,6,7,8 */
+	.tAA_ps = 13125,
+	.tWR_ps = 15000,
+	.tRCD_ps = 13125,
+	.tRRD_ps = 7500,
+	.tRP_ps = 13125,
+	.tRAS_ps = 37500,
+	.tRC_ps = 50625,
+	.tRFC_ps = 160000,
+	.tWTR_ps = 7500,
+	.tRTP_ps = 7500,
+	.refresh_rate_ps = 7800000,
+	.tFAW_ps = 37500,
+};
+
+int fsl_ddr_get_dimm_params(dimm_params_t *pdimm,
+		unsigned int controller_number,
+		unsigned int dimm_number)
+{
+	const char dimm_model[] = "Fixed DDR on board";
+
+	if ((controller_number == 0) && (dimm_number == 0)) {
+		memcpy(pdimm, &ddr_raw_timing, sizeof(dimm_params_t));
+		memset(pdimm->mpart, 0, sizeof(pdimm->mpart));
+		memcpy(pdimm->mpart, dimm_model, sizeof(dimm_model) - 1);
+	}
+
+	return 0;
+}
+
+void fsl_ddr_board_options(memctl_options_t *popts,
+				dimm_params_t *pdimm,
+				unsigned int ctrl_num)
+{
+	int i;
+	popts->clk_adjust = 6;
+	popts->cpo_override = 0x1f;
+	popts->write_data_delay = 2;
+	popts->half_strength_driver_enable = 1;
+	/* Write leveling override */
+	popts->wrlvl_en = 1;
+	popts->wrlvl_override = 1;
+	popts->wrlvl_sample = 0xf;
+	popts->wrlvl_start = 0x8;
+	popts->trwt_override = 1;
+	popts->trwt = 0;
+
+	for (i = 0; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) {
+		popts->cs_local_opts[i].odt_rd_cfg = FSL_DDR_ODT_NEVER;
+		popts->cs_local_opts[i].odt_wr_cfg = FSL_DDR_ODT_CS;
+	}
+}
+
+#endif /* CONFIG_SYS_DDR_RAW_TIMING */
diff --git a/board/freescale/bsc9132qds/law.c b/board/freescale/bsc9132qds/law.c
new file mode 100644
index 0000000..dc23658
--- /dev/null
+++ b/board/freescale/bsc9132qds/law.c
@@ -0,0 +1,35 @@
+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/fsl_law.h>
+#include <asm/mmu.h>
+
+struct law_entry law_table[] = {
+#ifndef CONFIG_SYS_NO_FLASH
+	SET_LAW(CONFIG_SYS_FLASH_BASE_PHYS, LAW_SIZE_128M, LAW_TRGT_IF_IFC),
+#endif
+	SET_LAW(CONFIG_SYS_NAND_BASE_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_IFC),
+	SET_LAW(CONFIG_SYS_FPGA_BASE_PHYS, LAW_SIZE_128K, LAW_TRGT_IF_IFC),
+};
+
+int num_law_entries = ARRAY_SIZE(law_table);
diff --git a/board/freescale/bsc9132qds/tlb.c b/board/freescale/bsc9132qds/tlb.c
new file mode 100644
index 0000000..0e4545f
--- /dev/null
+++ b/board/freescale/bsc9132qds/tlb.c
@@ -0,0 +1,92 @@
+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/mmu.h>
+
+struct fsl_e_tlb_entry tlb_table[] = {
+	/* TLB 0 - for temp stack in cache */
+	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR, CONFIG_SYS_INIT_RAM_ADDR,
+			MAS3_SX|MAS3_SW|MAS3_SR, 0,
+			0, 0, BOOKE_PAGESZ_4K, 0),
+	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024 ,
+			CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024,
+			MAS3_SX|MAS3_SW|MAS3_SR, 0,
+			0, 0, BOOKE_PAGESZ_4K, 0),
+	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024 ,
+			CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024,
+			MAS3_SX|MAS3_SW|MAS3_SR, 0,
+			0, 0, BOOKE_PAGESZ_4K, 0),
+	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024 ,
+			CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024,
+			MAS3_SX|MAS3_SW|MAS3_SR, 0,
+			0, 0, BOOKE_PAGESZ_4K, 0),
+
+	/* TLB 1 */
+	/* *I*** - Covers boot page */
+	SET_TLB_ENTRY(1, 0xfffff000, 0xfffff000,
+			MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+			0, 0, BOOKE_PAGESZ_4K, 1),
+
+	/* *I*G* - CCSRBAR (PA) */
+	SET_TLB_ENTRY(1, CONFIG_SYS_CCSRBAR, CONFIG_SYS_CCSRBAR_PHYS,
+			MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+			0, 1, BOOKE_PAGESZ_1M, 1),
+
+	SET_TLB_ENTRY(1, CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE_PHYS,
+			MAS3_SX|MAS3_SR, MAS2_W|MAS2_G,
+			0, 3, BOOKE_PAGESZ_64M, 1),
+
+	SET_TLB_ENTRY(1, CONFIG_SYS_FLASH_BASE + 0x4000000,
+			CONFIG_SYS_FLASH_BASE_PHYS + 0x4000000,
+			MAS3_SX|MAS3_SR, MAS2_W|MAS2_G,
+			0, 4, BOOKE_PAGESZ_64M, 1),
+
+#if defined(CONFIG_SYS_RAMBOOT)
+	SET_TLB_ENTRY(1, CONFIG_SYS_DDR_SDRAM_BASE, CONFIG_SYS_DDR_SDRAM_BASE,
+			MAS3_SX|MAS3_SW|MAS3_SR, 0,
+			0, 8, BOOKE_PAGESZ_1G, 1),
+#endif
+
+#ifdef CONFIG_PCI
+	/* *I*G* - PCI */
+	SET_TLB_ENTRY(1, CONFIG_SYS_PCIE1_MEM_VIRT, CONFIG_SYS_PCIE1_MEM_PHYS,
+			MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+			0, 6, BOOKE_PAGESZ_256M, 1),
+
+	/* *I*G* - PCI I/O */
+	SET_TLB_ENTRY(1, CONFIG_SYS_PCIE1_IO_VIRT, CONFIG_SYS_PCIE1_IO_PHYS,
+			MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+			0, 7, BOOKE_PAGESZ_64K, 1),
+#endif
+
+		/* *I*G - Board FPGA  */
+	SET_TLB_ENTRY(1, CONFIG_SYS_FPGA_BASE, CONFIG_SYS_FPGA_BASE_PHYS,
+			MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+			0, 9, BOOKE_PAGESZ_256K, 1),
+
+	SET_TLB_ENTRY(1, CONFIG_SYS_NAND_BASE, CONFIG_SYS_NAND_BASE_PHYS,
+			MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+			0, 5, BOOKE_PAGESZ_1M, 1),
+};
+
+int num_tlb_entries = ARRAY_SIZE(tlb_table);
diff --git a/board/freescale/common/qixis.c b/board/freescale/common/qixis.c
index c92902a..2b74d02 100644
--- a/board/freescale/common/qixis.c
+++ b/board/freescale/common/qixis.c
@@ -14,8 +14,23 @@
 #include <common.h>
 #include <command.h>
 #include <asm/io.h>
+#include <linux/time.h>
+#include <i2c.h>
 #include "qixis.h"
 
+#ifdef CONFIG_SYS_I2C_FPGA_ADDR
+u8 qixis_read_i2c(unsigned int reg)
+{
+	return i2c_reg_read(CONFIG_SYS_I2C_FPGA_ADDR, reg);
+}
+
+void qixis_write_i2c(unsigned int reg, u8 value)
+{
+	u8 val = value;
+	i2c_reg_write(CONFIG_SYS_I2C_FPGA_ADDR, reg, val);
+}
+#endif
+
 u8 qixis_read(unsigned int reg)
 {
 	void *p = (void *)QIXIS_BASE;
@@ -30,6 +45,72 @@ void qixis_write(unsigned int reg, u8 value)
 	out_8(p + reg, value);
 }
 
+u16 qixis_read_minor(void)
+{
+	u16 minor;
+
+	/* this data is in little endian */
+	QIXIS_WRITE(tagdata, 5);
+	minor = QIXIS_READ(tagdata);
+	QIXIS_WRITE(tagdata, 6);
+	minor += QIXIS_READ(tagdata) << 8;
+
+	return minor;
+}
+
+char *qixis_read_time(char *result)
+{
+	time_t time = 0;
+	int i;
+
+	/* timestamp is in 32-bit big endian */
+	for (i = 8; i <= 11; i++) {
+		QIXIS_WRITE(tagdata, i);
+		time =  (time << 8) + QIXIS_READ(tagdata);
+	}
+
+	return ctime_r(&time, result);
+}
+
+char *qixis_read_tag(char *buf)
+{
+	int i;
+	char tag, *ptr = buf;
+
+	for (i = 16; i <= 63; i++) {
+		QIXIS_WRITE(tagdata, i);
+		tag = QIXIS_READ(tagdata);
+		*(ptr++) = tag;
+		if (!tag)
+			break;
+	}
+	if (i > 63)
+		*ptr = '\0';
+
+	return buf;
+}
+
+/*
+ * return the string of binary of u8 in the format of
+ * 1010 10_0. The masked bit is filled as underscore.
+ */
+const char *byte_to_binary_mask(u8 val, u8 mask, char *buf)
+{
+	char *ptr;
+	int i;
+
+	ptr = buf;
+	for (i = 0x80; i > 0x08 ; i >>= 1, ptr++)
+		*ptr = (val & i) ? '1' : ((mask & i) ? '_' : '0');
+	*(ptr++) = ' ';
+	for (i = 0x08; i > 0 ; i >>= 1, ptr++)
+		*ptr = (val & i) ? '1' : ((mask & i) ? '_' : '0');
+
+	*ptr = '\0';
+
+	return buf;
+}
+
 void qixis_reset(void)
 {
 	QIXIS_WRITE(rst_ctl, QIXIS_RST_CTL_RESET);
@@ -61,7 +142,6 @@ void set_altbank(void)
 	QIXIS_WRITE(brdcfg[0], reg);
 }
 
-#ifdef DEBUG
 static void qixis_dump_regs(void)
 {
 	int i;
@@ -91,7 +171,14 @@ static void qixis_dump_regs(void)
 	printf("stat_sys = %02x\n", QIXIS_READ(stat_sys));
 	printf("stat_alrm = %02x\n", QIXIS_READ(stat_alrm));
 }
-#endif
+
+static void __qixis_dump_switch(void)
+{
+	puts("Reverse engineering switch is not implemented for this board\n");
+}
+
+void qixis_dump_switch(void)
+	__attribute__((weak, alias("__qixis_dump_switch")));
 
 int qixis_reset_cmd(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 {
@@ -122,16 +209,13 @@ int qixis_reset_cmd(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 				return 0;
 			}
 		}
-	}
-
-#ifdef DEBUG
-	else if (strcmp(argv[1], "dump") == 0) {
+	} else if (strcmp(argv[1], "dump") == 0) {
 		qixis_dump_regs();
 		return 0;
-	}
-#endif
-
-	else {
+	} else if (strcmp(argv[1], "switch") == 0) {
+		qixis_dump_switch();
+		return 0;
+	} else {
 		printf("Invalid option: %s\n", argv[1]);
 		return 1;
 	}
@@ -146,7 +230,6 @@ U_BOOT_CMD(
 	"qixis_reset altbank - reset to alternate bank\n"
 	"qixis watchdog <watchdog_period> - set the watchdog period\n"
 	"	period: 1s 2s 4s 8s 16s 32s 1min 2min 4min 8min\n"
-#ifdef DEBUG
 	"qixis_reset dump - display the QIXIS registers\n"
-#endif
+	"qixis_reset switch - display switch\n"
 	);
diff --git a/board/freescale/common/qixis.h b/board/freescale/common/qixis.h
index b98b180..8d914d5 100644
--- a/board/freescale/common/qixis.h
+++ b/board/freescale/common/qixis.h
@@ -88,8 +88,21 @@ struct qixis {
 
 u8 qixis_read(unsigned int reg);
 void qixis_write(unsigned int reg, u8 value);
+u16 qixis_read_minor(void);
+char *qixis_read_time(char *result);
+char *qixis_read_tag(char *buf);
+const char *byte_to_binary_mask(u8 val, u8 mask, char *buf);
+#ifdef CONFIG_SYS_I2C_FPGA_ADDR
+u8 qixis_read_i2c(unsigned int reg);
+void qixis_write_i2c(unsigned int reg, u8 value);
+#endif
 
 #define QIXIS_READ(reg) qixis_read(offsetof(struct qixis, reg))
 #define QIXIS_WRITE(reg, value) qixis_write(offsetof(struct qixis, reg), value)
+#ifdef CONFIG_SYS_I2C_FPGA_ADDR
+#define QIXIS_READ_I2C(reg) qixis_read_i2c(offsetof(struct qixis, reg))
+#define QIXIS_WRITE_I2C(reg, value) \
+			qixis_write_i2c(offsetof(struct qixis, reg), value)
+#endif
 
 #endif
diff --git a/board/freescale/corenet_ds/corenet_ds.c b/board/freescale/corenet_ds/corenet_ds.c
index 21428e3..48f7155 100644
--- a/board/freescale/corenet_ds/corenet_ds.c
+++ b/board/freescale/corenet_ds/corenet_ds.c
@@ -42,7 +42,7 @@ DECLARE_GLOBAL_DATA_PTR;
 int checkboard (void)
 {
 	u8 sw;
-	struct cpu_type *cpu = gd->cpu;
+	struct cpu_type *cpu = gd->arch.cpu;
 	ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR;
 	unsigned int i;
 	static const char * const freq[] = {"100", "125", "156.25", "212.5" };
diff --git a/board/freescale/corenet_ds/rcw_p2041rdb.cfg b/board/freescale/corenet_ds/rcw_p2041rdb.cfg
new file mode 100644
index 0000000..8df19dd
--- /dev/null
+++ b/board/freescale/corenet_ds/rcw_p2041rdb.cfg
@@ -0,0 +1,11 @@
+#
+# Default RCW for P2041RDB.
+#
+
+#PBL preamble and RCW header
+aa55aa55 010e0100
+#64 bytes RCW data
+12600000 00000000 241C0000 00000000
+649FA0C1 C3C02000 58000000 40000000
+00000000 00000000 00000000 D0030F07
+00000000 00000000 00000000 00000000
diff --git a/board/freescale/p1010rdb/ddr.c b/board/freescale/p1010rdb/ddr.c
index 6d00caf..49310bd 100644
--- a/board/freescale/p1010rdb/ddr.c
+++ b/board/freescale/p1010rdb/ddr.c
@@ -99,7 +99,7 @@ unsigned long get_sdram_size(void)
 	struct cpu_type *cpu;
 	phys_size_t ddr_size;
 
-	cpu = gd->cpu;
+	cpu = gd->arch.cpu;
 	/* P1014 and it's derivatives support max 16it DDR width */
 	if (cpu->soc_ver == SVR_P1014)
 		ddr_size = (CONFIG_SYS_DRAM_SIZE / 2);
@@ -144,7 +144,7 @@ phys_size_t fixed_sdram(void)
 		panic("Unsupported DDR data rate %s MT/s data rate\n",
 					strmhz(buf, ddr_freq));
 
-	cpu = gd->cpu;
+	cpu = gd->arch.cpu;
 	/* P1014 and it's derivatives support max 16bit DDR width */
 	if (cpu->soc_ver == SVR_P1014) {
 		ddr_cfg_regs.ddr_sdram_cfg &= ~SDRAM_CFG_DBW_MASK;
@@ -237,7 +237,7 @@ void fsl_ddr_board_options(memctl_options_t *popts,
 	popts->trwt_override = 1;
 	popts->trwt = 0;
 
-	cpu = gd->cpu;
+	cpu = gd->arch.cpu;
 	/* P1014 and it's derivatives support max 16it DDR width */
 	if (cpu->soc_ver == SVR_P1014)
 		popts->data_bus_width = DDR_DATA_BUS_WIDTH_16;
diff --git a/board/freescale/p1010rdb/p1010rdb.c b/board/freescale/p1010rdb/p1010rdb.c
index dfeb86f..11e2e8a 100644
--- a/board/freescale/p1010rdb/p1010rdb.c
+++ b/board/freescale/p1010rdb/p1010rdb.c
@@ -164,7 +164,7 @@ int checkboard(void)
 {
 	struct cpu_type *cpu;
 
-	cpu = gd->cpu;
+	cpu = gd->arch.cpu;
 	printf("Board: %sRDB\n", cpu->name);
 
 	return 0;
@@ -178,7 +178,7 @@ int board_eth_init(bd_t *bis)
 	struct cpu_type *cpu;
 	int num = 0;
 
-	cpu = gd->cpu;
+	cpu = gd->arch.cpu;
 
 #ifdef CONFIG_TSEC1
 	SET_STD_TSEC_INFO(tsec_info[num], 1);
@@ -283,7 +283,7 @@ void ft_board_setup(void *blob, bd_t *bd)
 	phys_size_t size;
 	struct cpu_type *cpu;
 
-	cpu = gd->cpu;
+	cpu = gd->arch.cpu;
 
 	ft_cpu_setup(blob, bd);
 
diff --git a/board/freescale/p1_p2_rdb/ddr.c b/board/freescale/p1_p2_rdb/ddr.c
index 916439c..b16b8c8 100644
--- a/board/freescale/p1_p2_rdb/ddr.c
+++ b/board/freescale/p1_p2_rdb/ddr.c
@@ -202,7 +202,7 @@ phys_size_t fixed_sdram (void)
 	struct cpu_type *cpu;
 	ulong ddr_freq, ddr_freq_mhz;
 
-	cpu = gd->cpu;
+	cpu = gd->arch.cpu;
 	/* P1020 and it's derivatives support max 32bit DDR width */
 	if (cpu->soc_ver == SVR_P1020 || cpu->soc_ver == SVR_P1011) {
 		ddr_size = (CONFIG_SYS_SDRAM_SIZE * 1024 * 1024 / 2);
diff --git a/board/freescale/p1_p2_rdb/p1_p2_rdb.c b/board/freescale/p1_p2_rdb/p1_p2_rdb.c
index 437eaf0..9c6683d 100644
--- a/board/freescale/p1_p2_rdb/p1_p2_rdb.c
+++ b/board/freescale/p1_p2_rdb/p1_p2_rdb.c
@@ -108,7 +108,7 @@ int checkboard (void)
 	else
 		panic ("Unexpected Board REV %x detected!!\n", board_rev_gpio);
 
-	cpu = gd->cpu;
+	cpu = gd->arch.cpu;
 	printf ("Board: %sRDB Rev%c\n", cpu->name, board_rev);
 
 	setbits_be32(&pgpio->gpdir, GPIO_DIR);
diff --git a/board/freescale/p2041rdb/eth.c b/board/freescale/p2041rdb/eth.c
index fec9777..4b0d577 100644
--- a/board/freescale/p2041rdb/eth.c
+++ b/board/freescale/p2041rdb/eth.c
@@ -136,11 +136,6 @@ void board_ft_fman_fixup_port(void *fdt, char *compat, phys_addr_t addr,
 }
 #endif /* #ifdef CONFIG_FMAN_ENET */
 
-#define CPLD_LANE_A_SEL	0x1
-#define CPLD_LANE_G_SEL	0x2
-#define CPLD_LANE_C_SEL	0x4
-#define CPLD_LANE_D_SEL	0x8
-
 int board_eth_init(bd_t *bis)
 {
 #ifdef CONFIG_FMAN_ENET
@@ -148,10 +143,6 @@ int board_eth_init(bd_t *bis)
 	struct tgec_mdio_info tgec_mdio_info;
 	unsigned int i, slot;
 	int lane;
-	ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR;
-	int srds_prtcl = (in_be32(&gur->rcwsr[4]) &
-				FSL_CORENET_RCWSR4_SRDS_PRTCL) >> 26;
-	u8 mux = CPLD_READ(serdes_mux);
 
 	printf("Initializing Fman\n");
 
@@ -181,36 +172,6 @@ int board_eth_init(bd_t *bis)
 	fm_info_set_phy_address(FM1_DTSEC2, CONFIG_SYS_FM1_DTSEC2_PHY_ADDR);
 	fm_info_set_phy_address(FM1_DTSEC3, CONFIG_SYS_FM1_DTSEC3_PHY_ADDR);
 
-	mux &= ~(CPLD_LANE_A_SEL | CPLD_LANE_C_SEL | CPLD_LANE_D_SEL);
-	switch (srds_prtcl) {
-	case 0x2:
-	case 0xf:
-		mux &= ~CPLD_LANE_G_SEL;
-		break;
-	case 0x5:
-	case 0x9:
-	case 0xa:
-	case 0x17:
-		mux |= CPLD_LANE_G_SEL;
-		break;
-	case 0x14:
-		mux = (mux & (~CPLD_LANE_G_SEL)) | CPLD_LANE_A_SEL;
-		break;
-	case 0x8:
-	case 0x16:
-	case 0x19:
-	case 0x1a:
-		mux |= CPLD_LANE_G_SEL | CPLD_LANE_C_SEL | CPLD_LANE_D_SEL;
-		break;
-	case 0x1c:
-		mux |= CPLD_LANE_G_SEL | CPLD_LANE_A_SEL;
-		break;
-	default:
-		printf("Fman:Unsupported SerDes Protocol 0x%02x\n", srds_prtcl);
-		break;
-	}
-	CPLD_WRITE(serdes_mux, mux);
-
 	for (i = FM1_DTSEC1; i < FM1_DTSEC1 + CONFIG_SYS_NUM_FM1_DTSEC; i++) {
 		int idx = i - FM1_DTSEC1;
 
diff --git a/board/freescale/p2041rdb/p2041rdb.c b/board/freescale/p2041rdb/p2041rdb.c
index d2732f5..a706a6d 100644
--- a/board/freescale/p2041rdb/p2041rdb.c
+++ b/board/freescale/p2041rdb/p2041rdb.c
@@ -43,7 +43,7 @@ DECLARE_GLOBAL_DATA_PTR;
 int checkboard(void)
 {
 	u8 sw;
-	struct cpu_type *cpu = gd->cpu;
+	struct cpu_type *cpu = gd->arch.cpu;
 	ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR;
 	unsigned int i;
 
@@ -101,6 +101,49 @@ int board_early_init_f(void)
 	return 0;
 }
 
+#define CPLD_LANE_A_SEL	0x1
+#define CPLD_LANE_G_SEL	0x2
+#define CPLD_LANE_C_SEL	0x4
+#define CPLD_LANE_D_SEL	0x8
+
+void board_config_lanes_mux(void)
+{
+	ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR;
+	int srds_prtcl = (in_be32(&gur->rcwsr[4]) &
+				FSL_CORENET_RCWSR4_SRDS_PRTCL) >> 26;
+
+	u8 mux = 0;
+	switch (srds_prtcl) {
+	case 0x2:
+	case 0x5:
+	case 0x9:
+	case 0xa:
+	case 0xf:
+		break;
+	case 0x8:
+		mux |= CPLD_LANE_C_SEL | CPLD_LANE_D_SEL;
+		break;
+	case 0x14:
+		mux |= CPLD_LANE_A_SEL;
+		break;
+	case 0x17:
+		mux |= CPLD_LANE_G_SEL;
+		break;
+	case 0x16:
+	case 0x19:
+	case 0x1a:
+		mux |= CPLD_LANE_G_SEL | CPLD_LANE_C_SEL | CPLD_LANE_D_SEL;
+		break;
+	case 0x1c:
+		mux |= CPLD_LANE_G_SEL | CPLD_LANE_A_SEL;
+		break;
+	default:
+		printf("Fman:Unsupported SerDes Protocol 0x%02x\n", srds_prtcl);
+		break;
+	}
+	CPLD_WRITE(serdes_mux, mux);
+}
+
 int board_early_init_r(void)
 {
 	const unsigned int flashbase = CONFIG_SYS_FLASH_BASE;
@@ -124,6 +167,7 @@ int board_early_init_r(void)
 
 	set_liodns();
 	setup_portals();
+	board_config_lanes_mux();
 
 	return 0;
 }
diff --git a/board/freescale/t4qds/law.c b/board/freescale/t4qds/law.c
index 5debcf6..6f2c5c8 100644
--- a/board/freescale/t4qds/law.c
+++ b/board/freescale/t4qds/law.c
@@ -40,7 +40,7 @@ struct law_entry law_table[] = {
 	SET_LAW(CONFIG_SYS_DCSRBAR_PHYS, LAW_SIZE_4M, LAW_TRGT_IF_DCSR),
 #endif
 #ifdef CONFIG_SYS_NAND_BASE_PHYS
-	SET_LAW(CONFIG_SYS_NAND_BASE_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_IFC),
+	SET_LAW(CONFIG_SYS_NAND_BASE_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_IFC),
 #endif
 };
 
diff --git a/board/freescale/t4qds/t4qds.c b/board/freescale/t4qds/t4qds.c
index 88b8ced..3c95f3f 100644
--- a/board/freescale/t4qds/t4qds.c
+++ b/board/freescale/t4qds/t4qds.c
@@ -42,16 +42,29 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
+static const int8_t vsc3316_fsm1_tx[8][2] = { {0, 0}, {1, 1}, {6, 6}, {7, 7},
+				{8, 8}, {9, 9}, {14, 14}, {15, 15} };
+
+static const int8_t vsc3316_fsm2_tx[8][2] = { {2, 2}, {3, 3}, {4, 4}, {5, 5},
+				{10, 10}, {11, 11}, {12, 12}, {13, 13} };
+
+static const int8_t vsc3316_fsm1_rx[8][2] = { {2, 12}, {3, 13}, {4, 5}, {5, 4},
+				{10, 11}, {11, 10}, {12, 2}, {13, 3} };
+
+static const int8_t vsc3316_fsm2_rx[8][2] = { {0, 15}, {1, 14}, {6, 7}, {7, 6},
+				{8, 9}, {9, 8}, {14, 1}, {15, 0} };
+
 int checkboard(void)
 {
+	char buf[64];
 	u8 sw;
-	struct cpu_type *cpu = gd->cpu;
+	struct cpu_type *cpu = gd->arch.cpu;
 	ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR;
 	unsigned int i;
 
 	printf("Board: %sQDS, ", cpu->name);
-	printf("Sys ID: 0x%02x, Sys Ver: 0x%02x, FPGA Ver: 0x%02x, ",
-		QIXIS_READ(id), QIXIS_READ(arch), QIXIS_READ(scver));
+	printf("Sys ID: 0x%02x, Sys Ver: 0x%02x, ",
+		QIXIS_READ(id), QIXIS_READ(arch));
 
 	sw = QIXIS_READ(brdcfg[0]);
 	sw = (sw & QIXIS_LBMAP_MASK) >> QIXIS_LBMAP_SHIFT;
@@ -65,6 +78,12 @@ int checkboard(void)
 	else
 		printf("invalid setting of SW%u\n", QIXIS_LBMAP_SWITCH);
 
+	printf("FPGA: v%d (%s), build %d",
+		(int)QIXIS_READ(scver), qixis_read_tag(buf),
+		(int)qixis_read_minor());
+	/* the timestamp string contains "\n" at the end */
+	printf(" on %s", qixis_read_time(buf));
+
 	/* Display the RCW, so that no one gets confused as to what RCW
 	 * we're actually using for this boot.
 	 */
@@ -393,3 +412,63 @@ void ft_board_setup(void *blob, bd_t *bd)
 	fdt_fixup_board_enet(blob);
 #endif
 }
+
+/*
+ * Reverse engineering switch settings.
+ * Some bits cannot be figured out. They will be displayed as
+ * underscore in binary format. mask[] has those bits.
+ * Some bits are calculated differently than the actual switches
+ * if booting with overriding by FPGA.
+ */
+void qixis_dump_switch(void)
+{
+	int i;
+	u8 sw[9];
+
+	/*
+	 * Any bit with 1 means that bit cannot be reverse engineered.
+	 * It will be displayed as _ in binary format.
+	 */
+	static const u8 mask[] = {0, 0, 0, 0, 0, 0x1, 0xdf, 0x3f, 0x1f};
+	char buf[10];
+	u8 brdcfg[16], dutcfg[16];
+
+	for (i = 0; i < 16; i++) {
+		brdcfg[i] = qixis_read(offsetof(struct qixis, brdcfg[0]) + i);
+		dutcfg[i] = qixis_read(offsetof(struct qixis, dutcfg[0]) + i);
+	}
+
+	sw[0] = dutcfg[0];
+	sw[1] = (dutcfg[1] << 0x07)		| \
+		((dutcfg[12] & 0xC0) >> 1)	| \
+		((dutcfg[11] & 0xE0) >> 3)	| \
+		((dutcfg[6] & 0x80) >> 6)	| \
+		((dutcfg[1] & 0x80) >> 7);
+	sw[2] = ((brdcfg[1] & 0x0f) << 4)	| \
+		((brdcfg[1] & 0x30) >> 2)	| \
+		((brdcfg[1] & 0x40) >> 5)	| \
+		((brdcfg[1] & 0x80) >> 7);
+	sw[3] = brdcfg[2];
+	sw[4] = ((dutcfg[2] & 0x01) << 7)	| \
+		((dutcfg[2] & 0x06) << 4)	| \
+		((~QIXIS_READ(present)) & 0x10)	| \
+		((brdcfg[3] & 0x80) >> 4)	| \
+		((brdcfg[3] & 0x01) << 2)	| \
+		((brdcfg[6] == 0x62) ? 3 :	\
+		((brdcfg[6] == 0x5a) ? 2 :	\
+		((brdcfg[6] == 0x5e) ? 1 : 0)));
+	sw[5] = ((brdcfg[0] & 0x0f) << 4)	| \
+		((QIXIS_READ(rst_ctl) & 0x30) >> 2) | \
+		((brdcfg[0] & 0x40) >> 5);
+	sw[6] = (brdcfg[11] & 0x20);
+	sw[7] = (((~QIXIS_READ(rst_ctl)) & 0x40) << 1) | \
+		((brdcfg[5] & 0x10) << 2);
+	sw[8] = ((brdcfg[12] & 0x08) << 4)	| \
+		((brdcfg[12] & 0x03) << 5);
+
+	puts("DIP switch (reverse-engineering)\n");
+	for (i = 0; i < 9; i++) {
+		printf("SW%d         = 0b%s (0x%02x)\n",
+			i + 1, byte_to_binary_mask(sw[i], mask[i], buf), sw[i]);
+	}
+}
diff --git a/board/freescale/t4qds/t4qds.h b/board/freescale/t4qds/t4qds.h
index c6a3492..f290f3c 100644
--- a/board/freescale/t4qds/t4qds.h
+++ b/board/freescale/t4qds/t4qds.h
@@ -23,15 +23,4 @@
 void fdt_fixup_board_enet(void *blob);
 void pci_of_setup(void *blob, bd_t *bd);
 
-static const int8_t vsc3316_fsm1_tx[8][2] = { {0, 0}, {1, 1}, {6, 6}, {7, 7},
-				{8, 8}, {9, 9}, {14, 14}, {15, 15} };
-
-static const int8_t vsc3316_fsm2_tx[8][2] = { {2, 2}, {3, 3}, {4, 4}, {5, 5},
-				{10, 10}, {11, 11}, {12, 12}, {13, 13} };
-
-static const int8_t vsc3316_fsm1_rx[8][2] = { {2, 12}, {3, 13}, {4, 5}, {5, 4},
-				{10, 11}, {11, 10}, {12, 2}, {13, 3} };
-
-static const int8_t vsc3316_fsm2_rx[8][2] = { {0, 15}, {1, 14}, {6, 7}, {7, 6},
-				{8, 9}, {9, 8}, {14, 1}, {15, 0} };
 #endif
diff --git a/board/freescale/t4qds/tlb.c b/board/freescale/t4qds/tlb.c
index 078a6e4..80eb511 100644
--- a/board/freescale/t4qds/tlb.c
+++ b/board/freescale/t4qds/tlb.c
@@ -125,7 +125,7 @@ struct fsl_e_tlb_entry tlb_table[] = {
 	 */
 	SET_TLB_ENTRY(1, CONFIG_SYS_NAND_BASE, CONFIG_SYS_NAND_BASE_PHYS,
 			MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
-			0, 16, BOOKE_PAGESZ_1M, 1),
+			0, 16, BOOKE_PAGESZ_64K, 1),
 #endif
 	SET_TLB_ENTRY(1, QIXIS_BASE, QIXIS_BASE_PHYS,
 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
diff --git a/board/gdsys/405ep/405ep.c b/board/gdsys/405ep/405ep.c
index bc9b7d0..6221171 100644
--- a/board/gdsys/405ep/405ep.c
+++ b/board/gdsys/405ep/405ep.c
@@ -38,14 +38,14 @@ DECLARE_GLOBAL_DATA_PTR;
 
 int get_fpga_state(unsigned dev)
 {
-	return gd->fpga_state[dev];
+	return gd->arch.fpga_state[dev];
 }
 
 void print_fpga_state(unsigned dev)
 {
-	if (gd->fpga_state[dev] & FPGA_STATE_DONE_FAILED)
+	if (gd->arch.fpga_state[dev] & FPGA_STATE_DONE_FAILED)
 		puts("       Waiting for FPGA-DONE timed out.\n");
-	if (gd->fpga_state[dev] & FPGA_STATE_REFLECTION_FAILED)
+	if (gd->arch.fpga_state[dev] & FPGA_STATE_REFLECTION_FAILED)
 		puts("       FPGA reflection test failed.\n");
 }
 
@@ -54,7 +54,7 @@ int board_early_init_f(void)
 	unsigned k;
 
 	for (k = 0; k < CONFIG_SYS_FPGA_COUNT; ++k)
-		gd->fpga_state[k] = 0;
+		gd->arch.fpga_state[k] = 0;
 
 	mtdcr(UIC0SR, 0xFFFFFFFF);	/* clear all ints */
 	mtdcr(UIC0ER, 0x00000000);	/* disable all ints */
@@ -78,7 +78,7 @@ int board_early_init_r(void)
 	unsigned ctr;
 
 	for (k = 0; k < CONFIG_SYS_FPGA_COUNT; ++k)
-		gd->fpga_state[k] = 0;
+		gd->arch.fpga_state[k] = 0;
 
 	/*
 	 * reset FPGA
@@ -94,7 +94,8 @@ int board_early_init_r(void)
 		while (!gd405ep_get_fpga_done(k)) {
 			udelay(100000);
 			if (ctr++ > 5) {
-				gd->fpga_state[k] |= FPGA_STATE_DONE_FAILED;
+				gd->arch.fpga_state[k] |=
+					FPGA_STATE_DONE_FAILED;
 				break;
 			}
 		}
@@ -126,7 +127,7 @@ int board_early_init_r(void)
 
 			udelay(100000);
 			if (ctr++ > 5) {
-				gd->fpga_state[k] |=
+				gd->arch.fpga_state[k] |=
 					FPGA_STATE_REFLECTION_FAILED;
 				break;
 			}
diff --git a/board/gdsys/405ex/405ex.c b/board/gdsys/405ex/405ex.c
index 5766c0f..32e24c0 100644
--- a/board/gdsys/405ex/405ex.c
+++ b/board/gdsys/405ex/405ex.c
@@ -15,14 +15,14 @@ DECLARE_GLOBAL_DATA_PTR;
 
 int get_fpga_state(unsigned dev)
 {
-	return gd->fpga_state[dev];
+	return gd->arch.fpga_state[dev];
 }
 
 void print_fpga_state(unsigned dev)
 {
-	if (gd->fpga_state[dev] & FPGA_STATE_DONE_FAILED)
+	if (gd->arch.fpga_state[dev] & FPGA_STATE_DONE_FAILED)
 		puts("       Waiting for FPGA-DONE timed out.\n");
-	if (gd->fpga_state[dev] & FPGA_STATE_REFLECTION_FAILED)
+	if (gd->arch.fpga_state[dev] & FPGA_STATE_REFLECTION_FAILED)
 		puts("       FPGA reflection test failed.\n");
 }
 
@@ -192,7 +192,7 @@ int board_early_init_r(void)
 	unsigned ctr;
 
 	for (k = 0; k < CONFIG_SYS_FPGA_COUNT; ++k)
-		gd->fpga_state[k] = 0;
+		gd->arch.fpga_state[k] = 0;
 
 	/*
 	 * reset FPGA
@@ -208,7 +208,8 @@ int board_early_init_r(void)
 		while (!gd405ex_get_fpga_done(k)) {
 			udelay(100000);
 			if (ctr++ > 5) {
-				gd->fpga_state[k] |= FPGA_STATE_DONE_FAILED;
+				gd->arch.fpga_state[k] |=
+					FPGA_STATE_DONE_FAILED;
 				break;
 			}
 		}
@@ -240,7 +241,7 @@ int board_early_init_r(void)
 
 			udelay(100000);
 			if (ctr++ > 5) {
-				gd->fpga_state[k] |=
+				gd->arch.fpga_state[k] |=
 					FPGA_STATE_REFLECTION_FAILED;
 				break;
 			}
diff --git a/board/gdsys/405ex/io64.c b/board/gdsys/405ex/io64.c
index 41fdef7..7d2899d 100644
--- a/board/gdsys/405ex/io64.c
+++ b/board/gdsys/405ex/io64.c
@@ -359,7 +359,7 @@ void gd405ex_init(void)
 
 	if (i2c_probe(0x22)) { /* i2c_probe returns 0 on success */
 		for (k = 0; k < CONFIG_SYS_FPGA_COUNT; ++k)
-			gd->fpga_state[k] |= FPGA_STATE_PLATFORM;
+			gd->arch.fpga_state[k] |= FPGA_STATE_PLATFORM;
 	} else {
 		pca9698_direction_output(0x22, 39, 1);
 	}
diff --git a/board/incaip/u-boot.lds b/board/incaip/u-boot.lds
deleted file mode 100644
index 8a871cf..0000000
--- a/board/incaip/u-boot.lds
+++ /dev/null
@@ -1,69 +0,0 @@
-/*
- * (C) Copyright 2003
- * Wolfgang Denk Engineering, <wd@denx.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
-OUTPUT_FORMAT("elf32-bigmips", "elf32-bigmips", "elf32-bigmips")
-*/
-OUTPUT_FORMAT("elf32-tradbigmips", "elf32-tradbigmips", "elf32-tradlittlemips")
-OUTPUT_ARCH(mips)
-ENTRY(_start)
-SECTIONS
-{
-	. = 0x00000000;
-
-	. = ALIGN(4);
-	.text       :
-	{
-	  *(.text*)
-	}
-
-	. = ALIGN(4);
-	.rodata  : { *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) }
-
-	. = ALIGN(4);
-	.data  : { *(.data*) }
-
-	. = .;
-	_gp = ALIGN(16) + 0x7ff0;
-
-	.got : {
-	  __got_start = .;
-	  *(.got)
-	  __got_end = .;
-	}
-
-	.sdata  : { *(.sdata*) }
-
-	. = ALIGN(4);
-	.u_boot_list : {
-		#include <u-boot.lst>
-	}
-
-	uboot_end_data = .;
-	num_got_entries = (__got_end - __got_start) >> 2;
-
-	. = ALIGN(4);
-	.sbss (NOLOAD)  : { *(.sbss*) }
-	.bss (NOLOAD)  : { *(.bss*) . = ALIGN(4); }
-	uboot_end = .;
-}
diff --git a/board/inka4x0/inkadiag.c b/board/inka4x0/inkadiag.c
index cf82f61..1c01bb4 100644
--- a/board/inka4x0/inkadiag.c
+++ b/board/inka4x0/inkadiag.c
@@ -187,7 +187,7 @@ static int ser_init(volatile struct mpc5xxx_psc *psc, int baudrate)
 	/* select clock sources */
 
 	out_be16(&psc->psc_clock_select, 0);
-	baseclk = (gd->ipb_clk + 16) / 32;
+	baseclk = (gd->arch.ipb_clk + 16) / 32;
 
 	/* switch to UART mode */
 	out_be32(&psc->sicr, 0);
@@ -369,7 +369,7 @@ static void buzzer_turn_on(unsigned int freq)
 {
 	volatile struct mpc5xxx_gpt *gpt = (struct mpc5xxx_gpt *)(BUZZER_GPT);
 
-	const u32 prescale = gd->ipb_clk / freq / 128;
+	const u32 prescale = gd->arch.ipb_clk / freq / 128;
 	const u32 count = 128;
 	const u32 width = 64;
 
@@ -405,9 +405,9 @@ static int do_inkadiag_buzzer(cmd_tbl_t *cmdtp, int flag, int argc,
 
 	freq = simple_strtol(argv[0], NULL, 0);
 	/* avoid zero prescale in buzzer_turn_on() */
-	if (freq > gd->ipb_clk / 128) {
+	if (freq > gd->arch.ipb_clk / 128) {
 		printf("%dHz exceeds maximum (%ldHz)\n", freq,
-		       gd->ipb_clk / 128);
+		       gd->arch.ipb_clk / 128);
 	} else if (!freq)
 		printf("Zero frequency is senseless\n");
 	else
diff --git a/board/lwmon/lwmon.c b/board/lwmon/lwmon.c
index b5e524b..34c6675 100644
--- a/board/lwmon/lwmon.c
+++ b/board/lwmon/lwmon.c
@@ -482,7 +482,7 @@ static void kbd_init (void)
 
 	i2c_init (CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
 
-	gd->kbd_status = 0;
+	gd->arch.kbd_status = 0;
 
 	/* Forced by PIC. Delays <= 175us loose */
 	udelay(1000);
@@ -496,7 +496,7 @@ static void kbd_init (void)
 	/* clear "irrelevant" bits. Recommended by Martin Rajek, LWN */
 	errcd &= ~(KEYBD_STATUS_H_RESET|KEYBD_STATUS_BROWNOUT);
 	if (errcd) {
-		gd->kbd_status |= errcd << 8;
+		gd->arch.kbd_status |= errcd << 8;
 	}
 	/* Reset error code and verify */
 	val = KEYBD_CMD_RESET_ERRORS;
@@ -509,7 +509,7 @@ static void kbd_init (void)
 
 	val &= KEYBD_STATUS_MASK;	/* clear unused bits */
 	if (val) {			/* permanent error, report it */
-		gd->kbd_status |= val;
+		gd->arch.kbd_status |= val;
 		return;
 	}
 
@@ -568,8 +568,8 @@ int misc_init_r (void)
 {
 	uchar kbd_data[KEYBD_DATALEN];
 	char keybd_env[2 * KEYBD_DATALEN + 1];
-	uchar kbd_init_status = gd->kbd_status >> 8;
-	uchar kbd_status = gd->kbd_status;
+	uchar kbd_init_status = gd->arch.kbd_status >> 8;
+	uchar kbd_status = gd->arch.kbd_status;
 	uchar val;
 	char *str;
 	int i;
diff --git a/board/lwmon5/kbd.c b/board/lwmon5/kbd.c
index 5231c7a..b66f681 100644
--- a/board/lwmon5/kbd.c
+++ b/board/lwmon5/kbd.c
@@ -113,7 +113,7 @@ static void kbd_init (void)
 
 	i2c_init (CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
 
-	gd->kbd_status = 0;
+	gd->arch.kbd_status = 0;
 
 	/* Forced by PIC. Delays <= 175us loose */
 	udelay(1000);
@@ -127,7 +127,7 @@ static void kbd_init (void)
 	/* clear "irrelevant" bits. Recommended by Martin Rajek, LWN */
 	errcd &= ~(KEYBD_STATUS_H_RESET|KEYBD_STATUS_BROWNOUT);
 	if (errcd) {
-		gd->kbd_status |= errcd << 8;
+		gd->arch.kbd_status |= errcd << 8;
 	}
 	/* Reset error code and verify */
 	val = KEYBD_CMD_RESET_ERRORS;
@@ -140,7 +140,7 @@ static void kbd_init (void)
 
 	val &= KEYBD_STATUS_MASK;	/* clear unused bits */
 	if (val) {			/* permanent error, report it */
-		gd->kbd_status |= val;
+		gd->arch.kbd_status |= val;
 		return;
 	}
 
@@ -216,8 +216,8 @@ int misc_init_r_kbd (void)
 {
 	uchar kbd_data[KEYBD_DATALEN];
 	char keybd_env[2 * KEYBD_DATALEN + 1];
-	uchar kbd_init_status = gd->kbd_status >> 8;
-	uchar kbd_status = gd->kbd_status;
+	uchar kbd_init_status = gd->arch.kbd_status >> 8;
+	uchar kbd_status = gd->arch.kbd_status;
 	uchar val;
 	ushort data, inv_data;
 	char *str;
diff --git a/board/lwmon5/lwmon5.c b/board/lwmon5/lwmon5.c
index ecd9536..29e24fb 100644
--- a/board/lwmon5/lwmon5.c
+++ b/board/lwmon5/lwmon5.c
@@ -357,16 +357,16 @@ void hw_watchdog_reset(void)
 	 * Don't allow watch-dog triggering more frequently than
 	 * the predefined value CONFIG_WD_MAX_RATE [ticks].
 	 */
-	if (ct >= gd->wdt_last) {
-		if ((ct - gd->wdt_last) < CONFIG_WD_MAX_RATE)
+	if (ct >= gd->arch.wdt_last) {
+		if ((ct - gd->arch.wdt_last) < CONFIG_WD_MAX_RATE)
 			return;
 	} else {
 		/* Time base counter had been reset */
-		if (((unsigned long long)(-1) - gd->wdt_last + ct) <
+		if (((unsigned long long)(-1) - gd->arch.wdt_last + ct) <
 		    CONFIG_WD_MAX_RATE)
 			return;
 	}
-	gd->wdt_last = get_ticks();
+	gd->arch.wdt_last = get_ticks();
 #endif
 
 	/*
diff --git a/board/pb1x00/u-boot.lds b/board/pb1x00/u-boot.lds
deleted file mode 100644
index 07ddd36..0000000
--- a/board/pb1x00/u-boot.lds
+++ /dev/null
@@ -1,69 +0,0 @@
-/*
- * (C) Copyright 2003
- * Wolfgang Denk Engineering, <wd@denx.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
-OUTPUT_FORMAT("elf32-bigmips", "elf32-bigmips", "elf32-bigmips")
-*/
-OUTPUT_FORMAT("elf32-tradlittlemips", "elf32-tradbigmips", "elf32-tradlittlemips")
-OUTPUT_ARCH(mips)
-ENTRY(_start)
-SECTIONS
-{
-	. = 0x00000000;
-
-	. = ALIGN(4);
-	.text       :
-	{
-	  *(.text*)
-	}
-
-	. = ALIGN(4);
-	.rodata  : { *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) }
-
-	. = ALIGN(4);
-	.data  : { *(.data*) }
-
-	. = .;
-	_gp = ALIGN(16) + 0x7ff0;
-
-	.got : {
-	  __got_start = .;
-	  *(.got)
-	  __got_end = .;
-	}
-
-	.sdata  : { *(.sdata*) }
-
-	. = ALIGN(4);
-	.u_boot_list : {
-		#include <u-boot.lst>
-	}
-
-	uboot_end_data = .;
-	num_got_entries = (__got_end - __got_start) >> 2;
-
-	. = ALIGN(4);
-	.sbss (NOLOAD)  : { *(.sbss*) }
-	.bss (NOLOAD)  : { *(.bss*) . = ALIGN(4); }
-	uboot_end = .;
-}
diff --git a/board/qemu-mips/u-boot.lds b/board/qemu-mips/u-boot.lds
deleted file mode 100644
index cb2356f..0000000
--- a/board/qemu-mips/u-boot.lds
+++ /dev/null
@@ -1,78 +0,0 @@
-/*
- * (C) Copyright 2003
- * Wolfgang Denk Engineering, <wd@denx.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
-OUTPUT_FORMAT("elf32-bigmips", "elf32-bigmips", "elf32-bigmips")
-*/
-#if defined(CONFIG_64BIT)
-OUTPUT_FORMAT("elf64-tradbigmips", "elf64-tradbigmips", "elf64-tradlittlemips")
-#else
-OUTPUT_FORMAT("elf32-tradbigmips", "elf32-tradbigmips", "elf32-tradlittlemips")
-#endif
-OUTPUT_ARCH(mips)
-ENTRY(_start)
-SECTIONS
-{
-	. = 0x00000000;
-
-	. = ALIGN(4);
-	.text       :
-	{
-	  *(.text*)
-	}
-
-	. = ALIGN(4);
-	.rodata  : { *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) }
-
-	. = ALIGN(4);
-	.data  : { *(.data*) }
-
-	. = .;
-	_gp = ALIGN(16) +0x7ff0;
-
-	.got  : {
-	__got_start = .;
-		*(.got)
-	__got_end = .;
-	}
-
-	. = ALIGN(4);
-	.sdata  : { *(.sdata*) }
-
-	. = ALIGN(4);
-	.u_boot_list : {
-		#include <u-boot.lst>
-	}
-
-	uboot_end_data = .;
-#if defined(CONFIG_64BIT)
-	num_got_entries = (__got_end - __got_start) >> 3;
-#else
-	num_got_entries = (__got_end - __got_start) >> 2;
-#endif
-
-	. = ALIGN(4);
-	.sbss  : { *(.sbss*) }
-	.bss  : { *(.bss*) . = ALIGN(4); }
-	uboot_end = .;
-}
diff --git a/board/sc3/init.S b/board/sc3/init.S
index d374db4..6352368 100644
--- a/board/sc3/init.S
+++ b/board/sc3/init.S
@@ -71,7 +71,8 @@ ext_bus_cntlr_init:
  * This is need for the external flash access
  */
 		lis r25,0x0800
-		ori r25,r25,0x0280			/* 0000 1000 0xxx 0000 0000 0010 100x xxxx = 0x03800280
+		/* 0000 1000 0xxx 0000 0000 0010 100x xxxx = 0x03800280 */
+		ori r25,r25,0x0280
 /*
  * Second, create a fast timing:
  * 90ns first cycle - 3 clock access
@@ -79,7 +80,8 @@ ext_bus_cntlr_init:
  * This is used for the internal access
  */
 		lis r26,0x8900
-		ori r26,r26,0x0280			/* 1000 1001 0xxx 0000 0000 0010 100x xxxx
+		/* 1000 1001 0xxx 0000 0000 0010 100x xxxx */
+		ori r26,r26,0x0280
 /*
  * We can't change settings on CS# if we currently use them.
  * -> load a few instructions into cache and run this code from cache
diff --git a/board/xilinx/common/xbasic_types.c b/board/xilinx/common/xbasic_types.c
deleted file mode 100644
index c3a171a..0000000
--- a/board/xilinx/common/xbasic_types.c
+++ /dev/null
@@ -1,165 +0,0 @@
-/******************************************************************************
-*
-*     Author: Xilinx, Inc.
-*
-*
-*     This program is free software; you can redistribute it and/or modify it
-*     under the terms of the GNU General Public License as published by the
-*     Free Software Foundation; either version 2 of the License, or (at your
-*     option) any later version.
-*
-*
-*     XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS" AS A
-*     COURTESY TO YOU. BY PROVIDING THIS DESIGN, CODE, OR INFORMATION AS
-*     ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE, APPLICATION OR STANDARD,
-*     XILINX IS MAKING NO REPRESENTATION THAT THIS IMPLEMENTATION IS FREE
-*     FROM ANY CLAIMS OF INFRINGEMENT, AND YOU ARE RESPONSIBLE FOR OBTAINING
-*     ANY THIRD PARTY RIGHTS YOU MAY REQUIRE FOR YOUR IMPLEMENTATION.
-*     XILINX EXPRESSLY DISCLAIMS ANY WARRANTY WHATSOEVER WITH RESPECT TO
-*     THE ADEQUACY OF THE IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY
-*     WARRANTIES OR REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM
-*     CLAIMS OF INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND
-*     FITNESS FOR A PARTICULAR PURPOSE.
-*
-*
-*     Xilinx hardware products are not intended for use in life support
-*     appliances, devices, or systems. Use in such applications is
-*     expressly prohibited.
-*
-*
-*     (c) Copyright 2002-2004 Xilinx Inc.
-*     All rights reserved.
-*
-     *
-*     You should have received a copy of the GNU General Public License along
-*     with this program; if not, write to the Free Software Foundation, Inc.,
-*     675 Mass Ave, Cambridge, MA 02139, USA.
-*
-******************************************************************************/
-/*****************************************************************************/
-/**
-*
-* @file xbasic_types.c
-*
-* This file contains basic functions for Xilinx software IP.
-*
-* <pre>
-* MODIFICATION HISTORY:
-*
-* Ver   Who    Date   Changes
-* ----- ---- -------- -------------------------------------------------------
-* 1.00a rpm  11/07/03 Added XNullHandler function as a stub interrupt handler
-* </pre>
-*
-******************************************************************************/
-
-/***************************** Include Files *********************************/
-
-#include "xbasic_types.h"
-
-/************************** Constant Definitions *****************************/
-
-/**************************** Type Definitions *******************************/
-
-/***************** Macros (Inline Functions) Definitions *********************/
-
-/************************** Variable Definitions *****************************/
-
-/**
- * This variable allows testing to be done easier with asserts. An assert
- * sets this variable such that a driver can evaluate this variable
- * to determine if an assert occurred.
- */
-unsigned int XAssertStatus;
-
-/**
- * This variable allows the assert functionality to be changed for testing
- * such that it does not wait infinitely. Use the debugger to disable the
- * waiting during testing of asserts.
- */
-u32 XWaitInAssert = TRUE;
-
-/* The callback function to be invoked when an assert is taken */
-static XAssertCallback XAssertCallbackRoutine = (XAssertCallback) NULL;
-
-/************************** Function Prototypes ******************************/
-
-/*****************************************************************************/
-/**
-*
-* Implements assert. Currently, it calls a user-defined callback function
-* if one has been set.  Then, it potentially enters an infinite loop depending
-* on the value of the XWaitInAssert variable.
-*
-* @param    File is the name of the filename of the source
-* @param    Line is the linenumber within File
-*
-* @return
-*
-* None.
-*
-* @note
-*
-* None.
-*
-******************************************************************************/
-void
-XAssert(char *File, int Line)
-{
-	/* if the callback has been set then invoke it */
-	if (XAssertCallbackRoutine != NULL) {
-		(*XAssertCallbackRoutine) (File, Line);
-	}
-
-	/* if specified, wait indefinitely such that the assert will show up
-	 * in testing
-	 */
-	while (XWaitInAssert) {
-	}
-}
-
-/*****************************************************************************/
-/**
-*
-* Sets up a callback function to be invoked when an assert occurs. If there
-* was already a callback installed, then it is replaced.
-*
-* @param    Routine is the callback to be invoked when an assert is taken
-*
-* @return
-*
-* None.
-*
-* @note
-*
-* This function has no effect if NDEBUG is set
-*
-******************************************************************************/
-void
-XAssertSetCallback(XAssertCallback Routine)
-{
-	XAssertCallbackRoutine = Routine;
-}
-
-/*****************************************************************************/
-/**
-*
-* Null handler function. This follows the XInterruptHandler signature for
-* interrupt handlers. It can be used to assign a null handler (a stub) to an
-* interrupt controller vector table.
-*
-* @param    NullParameter is an arbitrary void pointer and not used.
-*
-* @return
-*
-* None.
-*
-* @note
-*
-* None.
-*
-******************************************************************************/
-void
-XNullHandler(void *NullParameter)
-{
-}
diff --git a/board/xilinx/common/xbasic_types.h b/board/xilinx/common/xbasic_types.h
deleted file mode 100644
index ef0b7c2..0000000
--- a/board/xilinx/common/xbasic_types.h
+++ /dev/null
@@ -1,283 +0,0 @@
-/******************************************************************************
-*
-*     Author: Xilinx, Inc.
-*
-*
-*     This program is free software; you can redistribute it and/or modify it
-*     under the terms of the GNU General Public License as published by the
-*     Free Software Foundation; either version 2 of the License, or (at your
-*     option) any later version.
-*
-*
-*     XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS" AS A
-*     COURTESY TO YOU. BY PROVIDING THIS DESIGN, CODE, OR INFORMATION AS
-*     ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE, APPLICATION OR STANDARD,
-*     XILINX IS MAKING NO REPRESENTATION THAT THIS IMPLEMENTATION IS FREE
-*     FROM ANY CLAIMS OF INFRINGEMENT, AND YOU ARE RESPONSIBLE FOR OBTAINING
-*     ANY THIRD PARTY RIGHTS YOU MAY REQUIRE FOR YOUR IMPLEMENTATION.
-*     XILINX EXPRESSLY DISCLAIMS ANY WARRANTY WHATSOEVER WITH RESPECT TO
-*     THE ADEQUACY OF THE IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY
-*     WARRANTIES OR REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM
-*     CLAIMS OF INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND
-*     FITNESS FOR A PARTICULAR PURPOSE.
-*
-*
-*     Xilinx hardware products are not intended for use in life support
-*     appliances, devices, or systems. Use in such applications is
-*     expressly prohibited.
-*
-*
-*     (c) Copyright 2002-2004 Xilinx Inc.
-*     All rights reserved.
-*
-*
-*     You should have received a copy of the GNU General Public License along
-*     with this program; if not, write to the Free Software Foundation, Inc.,
-*     675 Mass Ave, Cambridge, MA 02139, USA.
-*
-******************************************************************************/
-/*****************************************************************************/
-/**
-*
-* @file xbasic_types.h
-*
-* This file contains basic types for Xilinx software IP.  These types do not
-* follow the standard naming convention with respect to using the component
-* name in front of each name because they are considered to be primitives.
-*
-* @note
-*
-* This file contains items which are architecture dependent.
-*
-* <pre>
-* MODIFICATION HISTORY:
-*
-* Ver	Who    Date   Changes
-* ----- ---- -------- -------------------------------------------------------
-* 1.00a rmm  12/14/01 First release
-*	rmm  05/09/03 Added "xassert always" macros to rid ourselves of diab
-*		      compiler warnings
-* 1.00a rpm  11/07/03 Added XNullHandler function as a stub interrupt handler
-* </pre>
-*
-******************************************************************************/
-
-#ifndef XBASIC_TYPES_H		/* prevent circular inclusions */
-#define XBASIC_TYPES_H		/* by using protection macros */
-
-/***************************** Include Files *********************************/
-
-/************************** Constant Definitions *****************************/
-
-#ifndef TRUE
-#define TRUE 1
-#endif
-#ifndef FALSE
-#define FALSE 0
-#endif
-
-#ifndef NULL
-#define NULL 0
-#endif
-/** Null */
-
-#define XCOMPONENT_IS_READY	0x11111111	/* component has been initialized */
-#define XCOMPONENT_IS_STARTED	0x22222222	/* component has been started */
-
-/* the following constants and declarations are for unit test purposes and are
- * designed to be used in test applications.
- */
-#define XTEST_PASSED	0
-#define XTEST_FAILED	1
-
-#define XASSERT_NONE	 0
-#define XASSERT_OCCURRED 1
-
-extern unsigned int XAssertStatus;
-extern void XAssert(char *, int);
-
-/**************************** Type Definitions *******************************/
-
-/** @name Primitive types
- * These primitive types are created for transportability.
- * They are dependent upon the target architecture.
- * @{
- */
-#include <linux/types.h>
-
-typedef struct {
-	u32 Upper;
-	u32 Lower;
-} Xuint64;
-
-/*@}*/
-
-/**
- * This data type defines an interrupt handler for a device.
- * The argument points to the instance of the component
- */
-typedef void (*XInterruptHandler) (void *InstancePtr);
-
-/**
- * This data type defines a callback to be invoked when an
- * assert occurs. The callback is invoked only when asserts are enabled
- */
-typedef void (*XAssertCallback) (char *FilenamePtr, int LineNumber);
-
-/***************** Macros (Inline Functions) Definitions *********************/
-
-/*****************************************************************************/
-/**
-* Return the most significant half of the 64 bit data type.
-*
-* @param x is the 64 bit word.
-*
-* @return
-*
-* The upper 32 bits of the 64 bit word.
-*
-* @note
-*
-* None.
-*
-******************************************************************************/
-#define XUINT64_MSW(x) ((x).Upper)
-
-/*****************************************************************************/
-/**
-* Return the least significant half of the 64 bit data type.
-*
-* @param x is the 64 bit word.
-*
-* @return
-*
-* The lower 32 bits of the 64 bit word.
-*
-* @note
-*
-* None.
-*
-******************************************************************************/
-#define XUINT64_LSW(x) ((x).Lower)
-
-#ifndef NDEBUG
-
-/*****************************************************************************/
-/**
-* This assert macro is to be used for functions that do not return anything
-* (void). This in conjunction with the XWaitInAssert boolean can be used to
-* accomodate tests so that asserts which fail allow execution to continue.
-*
-* @param expression is the expression to evaluate. If it evaluates to false,
-*	 the assert occurs.
-*
-* @return
-*
-* Returns void unless the XWaitInAssert variable is true, in which case
-* no return is made and an infinite loop is entered.
-*
-* @note
-*
-* None.
-*
-******************************************************************************/
-#define XASSERT_VOID(expression)			\
-{							\
-	if (expression) {				\
-		XAssertStatus = XASSERT_NONE;		\
-	} else {					\
-		XAssert(__FILE__, __LINE__);		\
-		XAssertStatus = XASSERT_OCCURRED;	\
-		return;					\
-	}						\
-}
-
-/*****************************************************************************/
-/**
-* This assert macro is to be used for functions that do return a value. This in
-* conjunction with the XWaitInAssert boolean can be used to accomodate tests so
-* that asserts which fail allow execution to continue.
-*
-* @param expression is the expression to evaluate. If it evaluates to false,
-*	 the assert occurs.
-*
-* @return
-*
-* Returns 0 unless the XWaitInAssert variable is true, in which case
-* no return is made and an infinite loop is entered.
-*
-* @note
-*
-* None.
-*
-******************************************************************************/
-#define XASSERT_NONVOID(expression)		   \
-{						   \
-	if (expression) {			   \
-		XAssertStatus = XASSERT_NONE;	   \
-	} else {				   \
-		XAssert(__FILE__, __LINE__);	   \
-		XAssertStatus = XASSERT_OCCURRED;  \
-		return 0;			   \
-	}					   \
-}
-
-/*****************************************************************************/
-/**
-* Always assert. This assert macro is to be used for functions that do not
-* return anything (void). Use for instances where an assert should always
-* occur.
-*
-* @return
-*
-* Returns void unless the XWaitInAssert variable is true, in which case
-* no return is made and an infinite loop is entered.
-*
-* @note
-*
-* None.
-*
-******************************************************************************/
-#define XASSERT_VOID_ALWAYS()			   \
-{						   \
-	XAssert(__FILE__, __LINE__);		   \
-	XAssertStatus = XASSERT_OCCURRED;	   \
-	return;					   \
-}
-
-/*****************************************************************************/
-/**
-* Always assert. This assert macro is to be used for functions that do return
-* a value. Use for instances where an assert should always occur.
-*
-* @return
-*
-* Returns void unless the XWaitInAssert variable is true, in which case
-* no return is made and an infinite loop is entered.
-*
-* @note
-*
-* None.
-*
-******************************************************************************/
-#define XASSERT_NONVOID_ALWAYS()		   \
-{						   \
-	XAssert(__FILE__, __LINE__);		   \
-	XAssertStatus = XASSERT_OCCURRED;	   \
-	return 0;				   \
-}
-
-#else
-
-#define XASSERT_VOID(expression)
-#define XASSERT_VOID_ALWAYS()
-#define XASSERT_NONVOID(expression)
-#define XASSERT_NONVOID_ALWAYS()
-#endif
-
-/************************** Function Prototypes ******************************/
-
-void XAssertSetCallback(XAssertCallback Routine);
-void XNullHandler(void *NullParameter);
-
-#endif	/* end of protection macro */
diff --git a/board/xilinx/common/xbuf_descriptor.h b/board/xilinx/common/xbuf_descriptor.h
deleted file mode 100644
index fdd51d5..0000000
--- a/board/xilinx/common/xbuf_descriptor.h
+++ /dev/null
@@ -1,252 +0,0 @@
-/******************************************************************************
-*
-*     Author: Xilinx, Inc.
-*
-*
-*     This program is free software; you can redistribute it and/or modify it
-*     under the terms of the GNU General Public License as published by the
-*     Free Software Foundation; either version 2 of the License, or (at your
-*     option) any later version.
-*
-*
-*     XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS" AS A
-*     COURTESY TO YOU. BY PROVIDING THIS DESIGN, CODE, OR INFORMATION AS
-*     ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE, APPLICATION OR STANDARD,
-*     XILINX IS MAKING NO REPRESENTATION THAT THIS IMPLEMENTATION IS FREE
-*     FROM ANY CLAIMS OF INFRINGEMENT, AND YOU ARE RESPONSIBLE FOR OBTAINING
-*     ANY THIRD PARTY RIGHTS YOU MAY REQUIRE FOR YOUR IMPLEMENTATION.
-*     XILINX EXPRESSLY DISCLAIMS ANY WARRANTY WHATSOEVER WITH RESPECT TO
-*     THE ADEQUACY OF THE IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY
-*     WARRANTIES OR REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM
-*     CLAIMS OF INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND
-*     FITNESS FOR A PARTICULAR PURPOSE.
-*
-*
-*     Xilinx hardware products are not intended for use in life support
-*     appliances, devices, or systems. Use in such applications is
-*     expressly prohibited.
-*
-*
-*     (c) Copyright 2002-2004 Xilinx Inc.
-*     All rights reserved.
-*
-*
-*     You should have received a copy of the GNU General Public License along
-*     with this program; if not, write to the Free Software Foundation, Inc.,
-*     675 Mass Ave, Cambridge, MA 02139, USA.
-*
-* FILENAME:
-*
-* xbuf_descriptor.h
-*
-* DESCRIPTION:
-*
-* This file contains the interface for the XBufDescriptor component.
-* The XBufDescriptor component is a passive component that only maps over
-* a buffer descriptor data structure shared by the scatter gather DMA hardware
-* and software. The component's primary purpose is to provide encapsulation of
-* the buffer descriptor processing.  See the source file xbuf_descriptor.c for
-* details.
-*
-* NOTES:
-*
-* Most of the functions of this component are implemented as macros in order
-* to optimize the processing.  The names are not all uppercase such that they
-* can be switched between macros and functions easily.
-*
-******************************************************************************/
-
-#ifndef XBUF_DESCRIPTOR_H	/* prevent circular inclusions */
-#define XBUF_DESCRIPTOR_H	/* by using protection macros */
-
-/***************************** Include Files *********************************/
-
-#include "xbasic_types.h"
-#include "xdma_channel_i.h"
-
-/************************** Constant Definitions *****************************/
-
-/* The following constants allow access to all fields of a buffer descriptor
- * and are necessary at this level of visibility to allow macros to access
- * and modify the fields of a buffer descriptor.  It is not expected that the
- * user of a buffer descriptor would need to use these constants.
- */
-
-#define XBD_DEVICE_STATUS_OFFSET    0
-#define XBD_CONTROL_OFFSET	    1
-#define XBD_SOURCE_OFFSET	    2
-#define XBD_DESTINATION_OFFSET	    3
-#define XBD_LENGTH_OFFSET	    4
-#define XBD_STATUS_OFFSET	    5
-#define XBD_NEXT_PTR_OFFSET	    6
-#define XBD_ID_OFFSET		    7
-#define XBD_FLAGS_OFFSET	    8
-#define XBD_RQSTED_LENGTH_OFFSET    9
-
-#define XBD_SIZE_IN_WORDS	    10
-
-/*
- * The following constants define the bits of the flags field of a buffer
- * descriptor
- */
-
-#define XBD_FLAGS_LOCKED_MASK	    1UL
-
-/**************************** Type Definitions *******************************/
-
-typedef u32 XBufDescriptor[XBD_SIZE_IN_WORDS];
-
-/***************** Macros (Inline Functions) Definitions *********************/
-
-/* each of the following macros are named the same as functions rather than all
- * upper case in order to allow either the macros or the functions to be
- * used, see the source file xbuf_descriptor.c for documentation
- */
-
-#define XBufDescriptor_Initialize(InstancePtr)			\
-{								\
-    (*((u32 *)InstancePtr + XBD_CONTROL_OFFSET) = 0);	    \
-    (*((u32 *)InstancePtr + XBD_SOURCE_OFFSET) = 0);	    \
-    (*((u32 *)InstancePtr + XBD_DESTINATION_OFFSET) = 0);   \
-    (*((u32 *)InstancePtr + XBD_LENGTH_OFFSET) = 0);	    \
-    (*((u32 *)InstancePtr + XBD_STATUS_OFFSET) = 0);	    \
-    (*((u32 *)InstancePtr + XBD_DEVICE_STATUS_OFFSET) = 0); \
-    (*((u32 *)InstancePtr + XBD_NEXT_PTR_OFFSET) = 0);	    \
-    (*((u32 *)InstancePtr + XBD_ID_OFFSET) = 0);	    \
-    (*((u32 *)InstancePtr + XBD_FLAGS_OFFSET) = 0);	    \
-    (*((u32 *)InstancePtr + XBD_RQSTED_LENGTH_OFFSET) = 0); \
-}
-
-#define XBufDescriptor_GetControl(InstancePtr)	 \
-    (u32)(*((u32 *)InstancePtr + XBD_CONTROL_OFFSET))
-
-#define XBufDescriptor_SetControl(InstancePtr, Control)	 \
-    (*((u32 *)InstancePtr + XBD_CONTROL_OFFSET) = (u32)Control)
-
-#define XBufDescriptor_IsLastControl(InstancePtr) \
-    (u32)(*((u32 *)InstancePtr + XBD_CONTROL_OFFSET) & \
-	       XDC_CONTROL_LAST_BD_MASK)
-
-#define XBufDescriptor_SetLast(InstancePtr) \
-    (*((u32 *)InstancePtr + XBD_CONTROL_OFFSET) |= XDC_CONTROL_LAST_BD_MASK)
-
-#define XBufDescriptor_GetSrcAddress(InstancePtr) \
-    ((u32 *)(*((u32 *)InstancePtr + XBD_SOURCE_OFFSET)))
-
-#define XBufDescriptor_SetSrcAddress(InstancePtr, Source) \
-    (*((u32 *)InstancePtr + XBD_SOURCE_OFFSET) = (u32)Source)
-
-#define XBufDescriptor_GetDestAddress(InstancePtr) \
-    ((u32 *)(*((u32 *)InstancePtr + XBD_DESTINATION_OFFSET)))
-
-#define XBufDescriptor_SetDestAddress(InstancePtr, Destination) \
-    (*((u32 *)InstancePtr + XBD_DESTINATION_OFFSET) = (u32)Destination)
-
-#define XBufDescriptor_GetLength(InstancePtr)				\
-    (u32)(*((u32 *)InstancePtr + XBD_RQSTED_LENGTH_OFFSET) -	\
-	      *((u32 *)InstancePtr + XBD_LENGTH_OFFSET))
-
-#define XBufDescriptor_SetLength(InstancePtr, Length)			    \
-{									    \
-    (*((u32 *)InstancePtr + XBD_LENGTH_OFFSET) = (u32)(Length));    \
-    (*((u32 *)InstancePtr + XBD_RQSTED_LENGTH_OFFSET) = (u32)(Length));\
-}
-
-#define XBufDescriptor_GetStatus(InstancePtr)	 \
-    (u32)(*((u32 *)InstancePtr + XBD_STATUS_OFFSET))
-
-#define XBufDescriptor_SetStatus(InstancePtr, Status)	 \
-    (*((u32 *)InstancePtr + XBD_STATUS_OFFSET) = (u32)Status)
-
-#define XBufDescriptor_IsLastStatus(InstancePtr) \
-    (u32)(*((u32 *)InstancePtr + XBD_STATUS_OFFSET) & \
-	       XDC_STATUS_LAST_BD_MASK)
-
-#define XBufDescriptor_GetDeviceStatus(InstancePtr) \
-    ((u32)(*((u32 *)InstancePtr + XBD_DEVICE_STATUS_OFFSET)))
-
-#define XBufDescriptor_SetDeviceStatus(InstancePtr, Status) \
-    (*((u32 *)InstancePtr + XBD_DEVICE_STATUS_OFFSET) = (u32)Status)
-
-#define XBufDescriptor_GetNextPtr(InstancePtr) \
-    (XBufDescriptor *)(*((u32 *)InstancePtr + XBD_NEXT_PTR_OFFSET))
-
-#define XBufDescriptor_SetNextPtr(InstancePtr, NextPtr) \
-    (*((u32 *)InstancePtr + XBD_NEXT_PTR_OFFSET) = (u32)NextPtr)
-
-#define XBufDescriptor_GetId(InstancePtr) \
-    (u32)(*((u32 *)InstancePtr + XBD_ID_OFFSET))
-
-#define XBufDescriptor_SetId(InstancePtr, Id) \
-    (*((u32 *)InstancePtr + XBD_ID_OFFSET) = (u32)Id)
-
-#define XBufDescriptor_GetFlags(InstancePtr) \
-    (u32)(*((u32 *)InstancePtr + XBD_FLAGS_OFFSET))
-
-#define XBufDescriptor_SetFlags(InstancePtr, Flags) \
-    (*((u32 *)InstancePtr + XBD_FLAGS_OFFSET) = (u32)Flags)
-
-#define XBufDescriptor_Lock(InstancePtr) \
-    (*((u32 *)InstancePtr + XBD_FLAGS_OFFSET) |= XBD_FLAGS_LOCKED_MASK)
-
-#define XBufDescriptor_Unlock(InstancePtr) \
-    (*((u32 *)InstancePtr + XBD_FLAGS_OFFSET) &= ~XBD_FLAGS_LOCKED_MASK)
-
-#define XBufDescriptor_IsLocked(InstancePtr) \
-    (*((u32 *)InstancePtr + XBD_FLAGS_OFFSET) & XBD_FLAGS_LOCKED_MASK)
-
-/************************** Function Prototypes ******************************/
-
-/* The following prototypes are provided to allow each of the functions to
- * be implemented as a function rather than a macro, and to provide the
- * syntax to allow users to understand how to call the macros, they are
- * commented out to prevent linker errors
- *
-
-u32 XBufDescriptor_Initialize(XBufDescriptor* InstancePtr);
-
-u32 XBufDescriptor_GetControl(XBufDescriptor* InstancePtr);
-void XBufDescriptor_SetControl(XBufDescriptor* InstancePtr, u32 Control);
-
-u32 XBufDescriptor_IsLastControl(XBufDescriptor* InstancePtr);
-void XBufDescriptor_SetLast(XBufDescriptor* InstancePtr);
-
-u32 XBufDescriptor_GetLength(XBufDescriptor* InstancePtr);
-void XBufDescriptor_SetLength(XBufDescriptor* InstancePtr, u32 Length);
-
-u32 XBufDescriptor_GetStatus(XBufDescriptor* InstancePtr);
-void XBufDescriptor_SetStatus(XBufDescriptor* InstancePtr, u32 Status);
-u32 XBufDescriptor_IsLastStatus(XBufDescriptor* InstancePtr);
-
-u32 XBufDescriptor_GetDeviceStatus(XBufDescriptor* InstancePtr);
-void XBufDescriptor_SetDeviceStatus(XBufDescriptor* InstancePtr,
-				    u32 Status);
-
-u32 XBufDescriptor_GetSrcAddress(XBufDescriptor* InstancePtr);
-void XBufDescriptor_SetSrcAddress(XBufDescriptor* InstancePtr,
-				  u32 SourceAddress);
-
-u32 XBufDescriptor_GetDestAddress(XBufDescriptor* InstancePtr);
-void XBufDescriptor_SetDestAddress(XBufDescriptor* InstancePtr,
-				   u32 DestinationAddress);
-
-XBufDescriptor* XBufDescriptor_GetNextPtr(XBufDescriptor* InstancePtr);
-void XBufDescriptor_SetNextPtr(XBufDescriptor* InstancePtr,
-			       XBufDescriptor* NextPtr);
-
-u32 XBufDescriptor_GetId(XBufDescriptor* InstancePtr);
-void XBufDescriptor_SetId(XBufDescriptor* InstancePtr, u32 Id);
-
-u32 XBufDescriptor_GetFlags(XBufDescriptor* InstancePtr);
-void XBufDescriptor_SetFlags(XBufDescriptor* InstancePtr, u32 Flags);
-
-void XBufDescriptor_Lock(XBufDescriptor* InstancePtr);
-void XBufDescriptor_Unlock(XBufDescriptor* InstancePtr);
-u32 XBufDescriptor_IsLocked(XBufDescriptor* InstancePtr);
-
-void XBufDescriptor_Copy(XBufDescriptor* InstancePtr,
-			 XBufDescriptor* DestinationPtr);
-
-*/
-
-#endif				/* end of protection macro */
diff --git a/board/xilinx/common/xdma_channel.c b/board/xilinx/common/xdma_channel.c
deleted file mode 100644
index f816138..0000000
--- a/board/xilinx/common/xdma_channel.c
+++ /dev/null
@@ -1,738 +0,0 @@
-/******************************************************************************
-*
-*     Author: Xilinx, Inc.
-*
-*
-*     This program is free software; you can redistribute it and/or modify it
-*     under the terms of the GNU General Public License as published by the
-*     Free Software Foundation; either version 2 of the License, or (at your
-*     option) any later version.
-*
-*
-*     XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS" AS A
-*     COURTESY TO YOU. BY PROVIDING THIS DESIGN, CODE, OR INFORMATION AS
-*     ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE, APPLICATION OR STANDARD,
-*     XILINX IS MAKING NO REPRESENTATION THAT THIS IMPLEMENTATION IS FREE
-*     FROM ANY CLAIMS OF INFRINGEMENT, AND YOU ARE RESPONSIBLE FOR OBTAINING
-*     ANY THIRD PARTY RIGHTS YOU MAY REQUIRE FOR YOUR IMPLEMENTATION.
-*     XILINX EXPRESSLY DISCLAIMS ANY WARRANTY WHATSOEVER WITH RESPECT TO
-*     THE ADEQUACY OF THE IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY
-*     WARRANTIES OR REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM
-*     CLAIMS OF INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND
-*     FITNESS FOR A PARTICULAR PURPOSE.
-*
-*
-*     Xilinx hardware products are not intended for use in life support
-*     appliances, devices, or systems. Use in such applications is
-*     expressly prohibited.
-*
-*
-*     (c) Copyright 2002-2004 Xilinx Inc.
-*     All rights reserved.
-*
-*
-*     You should have received a copy of the GNU General Public License along
-*     with this program; if not, write to the Free Software Foundation, Inc.,
-*     675 Mass Ave, Cambridge, MA 02139, USA.
-*
-* FILENAME:
-*
-* xdma_channel.c
-*
-* DESCRIPTION:
-*
-* This file contains the DMA channel component. This component supports
-* a distributed DMA design in which each device can have it's own dedicated
-* DMA channel, as opposed to a centralized DMA design. This component
-* performs processing for DMA on all devices.
-*
-* See xdma_channel.h for more information about this component.
-*
-* NOTES:
-*
-* None.
-*
-******************************************************************************/
-
-/***************************** Include Files *********************************/
-
-#include "xdma_channel.h"
-#include "xbasic_types.h"
-#include "xio.h"
-
-/************************** Constant Definitions *****************************/
-
-/**************************** Type Definitions *******************************/
-
-/***************** Macros (Inline Functions) Definitions *********************/
-
-/************************** Function Prototypes ******************************/
-
-/******************************************************************************
-*
-* FUNCTION:
-*
-* XDmaChannel_Initialize
-*
-* DESCRIPTION:
-*
-* This function initializes a DMA channel.  This function must be called
-* prior to using a DMA channel.  Initialization of a channel includes setting
-* up the registers base address, and resetting the channel such that it's in a
-* known state.  Interrupts for the channel are disabled when the channel is
-* reset.
-*
-* ARGUMENTS:
-*
-* InstancePtr contains a pointer to the DMA channel to operate on.
-*
-* BaseAddress contains the base address of the registers for the DMA channel.
-*
-* RETURN VALUE:
-*
-* XST_SUCCESS indicating initialization was successful.
-*
-* NOTES:
-*
-* None.
-*
-******************************************************************************/
-XStatus
-XDmaChannel_Initialize(XDmaChannel * InstancePtr, u32 BaseAddress)
-{
-	/* assert to verify input arguments, don't assert base address */
-
-	XASSERT_NONVOID(InstancePtr != NULL);
-
-	/* setup the base address of the registers for the DMA channel such
-	 * that register accesses can be done
-	 */
-	InstancePtr->RegBaseAddress = BaseAddress;
-
-	/* initialize the scatter gather list such that it indicates it has not
-	 * been created yet and the DMA channel is ready to use (initialized)
-	 */
-	InstancePtr->GetPtr = NULL;
-	InstancePtr->PutPtr = NULL;
-	InstancePtr->CommitPtr = NULL;
-	InstancePtr->LastPtr = NULL;
-
-	InstancePtr->TotalDescriptorCount = 0;
-	InstancePtr->ActiveDescriptorCount = 0;
-	InstancePtr->IsReady = XCOMPONENT_IS_READY;
-
-	/* initialize the version of the component
-	 */
-	XVersion_FromString(&InstancePtr->Version, (s8 *)"1.00a");
-
-	/* reset the DMA channel such that it's in a known state and ready
-	 * and indicate the initialization occured with no errors, note that
-	 * the is ready variable must be set before this call or reset will assert
-	 */
-	XDmaChannel_Reset(InstancePtr);
-
-	return XST_SUCCESS;
-}
-
-/******************************************************************************
-*
-* FUNCTION:
-*
-* XDmaChannel_IsReady
-*
-* DESCRIPTION:
-*
-* This function determines if a DMA channel component has been successfully
-* initialized such that it's ready to use.
-*
-* ARGUMENTS:
-*
-* InstancePtr contains a pointer to the DMA channel to operate on.
-*
-* RETURN VALUE:
-*
-* TRUE if the DMA channel component is ready, FALSE otherwise.
-*
-* NOTES:
-*
-* None.
-*
-******************************************************************************/
-u32
-XDmaChannel_IsReady(XDmaChannel * InstancePtr)
-{
-	/* assert to verify input arguments used by the base component */
-
-	XASSERT_NONVOID(InstancePtr != NULL);
-
-	return InstancePtr->IsReady == XCOMPONENT_IS_READY;
-}
-
-/******************************************************************************
-*
-* FUNCTION:
-*
-* XDmaChannel_GetVersion
-*
-* DESCRIPTION:
-*
-* This function gets the software version for the specified DMA channel
-* component.
-*
-* ARGUMENTS:
-*
-* InstancePtr contains a pointer to the DMA channel to operate on.
-*
-* RETURN VALUE:
-*
-* A pointer to the software version of the specified DMA channel.
-*
-* NOTES:
-*
-* None.
-*
-******************************************************************************/
-XVersion *
-XDmaChannel_GetVersion(XDmaChannel * InstancePtr)
-{
-	/* assert to verify input arguments */
-
-	XASSERT_NONVOID(InstancePtr != NULL);
-	XASSERT_NONVOID(InstancePtr->IsReady == XCOMPONENT_IS_READY);
-
-	/* return a pointer to the version of the DMA channel */
-
-	return &InstancePtr->Version;
-}
-
-/******************************************************************************
-*
-* FUNCTION:
-*
-* XDmaChannel_SelfTest
-*
-* DESCRIPTION:
-*
-* This function performs a self test on the specified DMA channel.  This self
-* test is destructive as the DMA channel is reset and a register default is
-* verified.
-*
-* ARGUMENTS:
-*
-* InstancePtr is a pointer to the DMA channel to be operated on.
-*
-* RETURN VALUE:
-*
-* XST_SUCCESS is returned if the self test is successful, or one of the
-* following errors.
-*
-*	XST_DMA_RESET_REGISTER_ERROR		Indicates the control register value
-*										after a reset was not correct
-*
-* NOTES:
-*
-* This test does not performs a DMA transfer to test the channel because the
-* DMA hardware will not currently allow a non-local memory transfer to non-local
-* memory (memory copy), but only allows a non-local memory to or from the device
-* memory (typically a FIFO).
-*
-******************************************************************************/
-
-#define XDC_CONTROL_REG_RESET_MASK  0x98000000UL	/* control reg reset value */
-
-XStatus
-XDmaChannel_SelfTest(XDmaChannel * InstancePtr)
-{
-	u32 ControlReg;
-
-	/* assert to verify input arguments */
-
-	XASSERT_NONVOID(InstancePtr != NULL);
-	XASSERT_NONVOID(InstancePtr->IsReady == XCOMPONENT_IS_READY);
-
-	/* reset the DMA channel such that it's in a known state before the test
-	 * it resets to no interrupts enabled, the desired state for the test
-	 */
-	XDmaChannel_Reset(InstancePtr);
-
-	/* this should be the first test to help prevent a lock up with the polling
-	 * loop that occurs later in the test, check the reset value of the DMA
-	 * control register to make sure it's correct, return with an error if not
-	 */
-	ControlReg = XDmaChannel_GetControl(InstancePtr);
-	if (ControlReg != XDC_CONTROL_REG_RESET_MASK) {
-		return XST_DMA_RESET_REGISTER_ERROR;
-	}
-
-	return XST_SUCCESS;
-}
-
-/******************************************************************************
-*
-* FUNCTION:
-*
-* XDmaChannel_Reset
-*
-* DESCRIPTION:
-*
-* This function resets the DMA channel. This is a destructive operation such
-* that it should not be done while a channel is being used.  If the DMA channel
-* is transferring data into other blocks, such as a FIFO, it may be necessary
-* to reset other blocks.  This function does not modify the contents of a
-* scatter gather list for a DMA channel such that the user is responsible for
-* getting buffer descriptors from the list if necessary.
-*
-* ARGUMENTS:
-*
-* InstancePtr contains a pointer to the DMA channel to operate on.
-*
-* RETURN VALUE:
-*
-* None.
-*
-* NOTES:
-*
-* None.
-*
-******************************************************************************/
-void
-XDmaChannel_Reset(XDmaChannel * InstancePtr)
-{
-	/* assert to verify input arguments */
-
-	XASSERT_VOID(InstancePtr != NULL);
-	XASSERT_VOID(InstancePtr->IsReady == XCOMPONENT_IS_READY);
-
-	/* reset the DMA channel such that it's in a known state, the reset
-	 * register is self clearing such that it only has to be set
-	 */
-	XIo_Out32(InstancePtr->RegBaseAddress + XDC_RST_REG_OFFSET,
-		  XDC_RESET_MASK);
-}
-
-/******************************************************************************
-*
-* FUNCTION:
-*
-* XDmaChannel_GetControl
-*
-* DESCRIPTION:
-*
-* This function gets the control register contents of the DMA channel.
-*
-* ARGUMENTS:
-*
-* InstancePtr contains a pointer to the DMA channel to operate on.
-*
-* RETURN VALUE:
-*
-* The control register contents of the DMA channel. One or more of the
-* following values may be contained the register.  Each of the values are
-* unique bit masks.
-*
-*	XDC_DMACR_SOURCE_INCR_MASK	Increment the source address
-*	XDC_DMACR_DEST_INCR_MASK	Increment the destination address
-*	XDC_DMACR_SOURCE_LOCAL_MASK Local source address
-*	XDC_DMACR_DEST_LOCAL_MASK	Local destination address
-*	XDC_DMACR_SG_ENABLE_MASK	Scatter gather enable
-*	XDC_DMACR_GEN_BD_INTR_MASK	Individual buffer descriptor interrupt
-*	XDC_DMACR_LAST_BD_MASK		Last buffer descriptor in a packet
-*
-* NOTES:
-*
-* None.
-*
-******************************************************************************/
-u32
-XDmaChannel_GetControl(XDmaChannel * InstancePtr)
-{
-	/* assert to verify input arguments */
-
-	XASSERT_NONVOID(InstancePtr != NULL);
-	XASSERT_NONVOID(InstancePtr->IsReady == XCOMPONENT_IS_READY);
-
-	/* return the contents of the DMA control register */
-
-	return XIo_In32(InstancePtr->RegBaseAddress + XDC_DMAC_REG_OFFSET);
-}
-
-/******************************************************************************
-*
-* FUNCTION:
-*
-* XDmaChannel_SetControl
-*
-* DESCRIPTION:
-*
-* This function sets the control register of the specified DMA channel.
-*
-* ARGUMENTS:
-*
-* InstancePtr contains a pointer to the DMA channel to operate on.
-*
-* Control contains the value to be written to the control register of the DMA
-* channel. One or more of the following values may be contained the register.
-* Each of the values are unique bit masks such that they may be ORed together
-* to enable multiple bits or inverted and ANDed to disable multiple bits.
-*
-*	XDC_DMACR_SOURCE_INCR_MASK	Increment the source address
-*	XDC_DMACR_DEST_INCR_MASK	Increment the destination address
-*	XDC_DMACR_SOURCE_LOCAL_MASK Local source address
-*	XDC_DMACR_DEST_LOCAL_MASK	Local destination address
-*	XDC_DMACR_SG_ENABLE_MASK	Scatter gather enable
-*	XDC_DMACR_GEN_BD_INTR_MASK	Individual buffer descriptor interrupt
-*	XDC_DMACR_LAST_BD_MASK		Last buffer descriptor in a packet
-*
-* RETURN VALUE:
-*
-* None.
-*
-* NOTES:
-*
-* None.
-*
-******************************************************************************/
-void
-XDmaChannel_SetControl(XDmaChannel * InstancePtr, u32 Control)
-{
-	/* assert to verify input arguments except the control which can't be
-	 * asserted since all values are valid
-	 */
-	XASSERT_VOID(InstancePtr != NULL);
-	XASSERT_VOID(InstancePtr->IsReady == XCOMPONENT_IS_READY);
-
-	/* set the DMA control register to the specified value */
-
-	XIo_Out32(InstancePtr->RegBaseAddress + XDC_DMAC_REG_OFFSET, Control);
-}
-
-/******************************************************************************
-*
-* FUNCTION:
-*
-* XDmaChannel_GetStatus
-*
-* DESCRIPTION:
-*
-* This function gets the status register contents of the DMA channel.
-*
-* ARGUMENTS:
-*
-* InstancePtr contains a pointer to the DMA channel to operate on.
-*
-* RETURN VALUE:
-*
-* The status register contents of the DMA channel. One or more of the
-* following values may be contained the register. Each of the values are
-* unique bit masks.
-*
-*	XDC_DMASR_BUSY_MASK			The DMA channel is busy
-*	XDC_DMASR_BUS_ERROR_MASK	A bus error occurred
-*	XDC_DMASR_BUS_TIMEOUT_MASK	A bus timeout occurred
-*	XDC_DMASR_LAST_BD_MASK		The last buffer descriptor of a packet
-*
-* NOTES:
-*
-* None.
-*
-******************************************************************************/
-u32
-XDmaChannel_GetStatus(XDmaChannel * InstancePtr)
-{
-	/* assert to verify input arguments */
-
-	XASSERT_NONVOID(InstancePtr != NULL);
-	XASSERT_NONVOID(InstancePtr->IsReady == XCOMPONENT_IS_READY);
-
-	/* return the contents of the DMA status register */
-
-	return XIo_In32(InstancePtr->RegBaseAddress + XDC_DMAS_REG_OFFSET);
-}
-
-/******************************************************************************
-*
-* FUNCTION:
-*
-* XDmaChannel_SetIntrStatus
-*
-* DESCRIPTION:
-*
-* This function sets the interrupt status register of the specified DMA channel.
-* Setting any bit of the interrupt status register will clear the bit to
-* indicate the interrupt processing has been completed. The definitions of each
-* bit in the register match the definition of the bits in the interrupt enable
-* register.
-*
-* ARGUMENTS:
-*
-* InstancePtr contains a pointer to the DMA channel to operate on.
-*
-* Status contains the value to be written to the status register of the DMA
-* channel.  One or more of the following values may be contained the register.
-* Each of the values are unique bit masks such that they may be ORed together
-* to enable multiple bits or inverted and ANDed to disable multiple bits.
-*
-*	XDC_IXR_DMA_DONE_MASK		The dma operation is done
-*	XDC_IXR_DMA_ERROR_MASK	    The dma operation had an error
-*	XDC_IXR_PKT_DONE_MASK	    A packet is complete
-*	XDC_IXR_PKT_THRESHOLD_MASK	The packet count threshold reached
-*	XDC_IXR_PKT_WAIT_BOUND_MASK The packet wait bound reached
-*	XDC_IXR_SG_DISABLE_ACK_MASK The scatter gather disable completed
-*	XDC_IXR_BD_MASK				A buffer descriptor is done
-*
-* RETURN VALUE:
-*
-* None.
-*
-* NOTES:
-*
-* None.
-*
-******************************************************************************/
-void
-XDmaChannel_SetIntrStatus(XDmaChannel * InstancePtr, u32 Status)
-{
-	/* assert to verify input arguments except the status which can't be
-	 * asserted since all values are valid
-	 */
-	XASSERT_VOID(InstancePtr != NULL);
-	XASSERT_VOID(InstancePtr->IsReady == XCOMPONENT_IS_READY);
-
-	/* set the interrupt status register with the specified value such that
-	 * all bits which are set in the register are cleared effectively clearing
-	 * any active interrupts
-	 */
-	XIo_Out32(InstancePtr->RegBaseAddress + XDC_IS_REG_OFFSET, Status);
-}
-
-/******************************************************************************
-*
-* FUNCTION:
-*
-* XDmaChannel_GetIntrStatus
-*
-* DESCRIPTION:
-*
-* This function gets the interrupt status register of the specified DMA channel.
-* The interrupt status register indicates which interrupts are active
-* for the DMA channel.  If an interrupt is active, the status register must be
-* set (written) with the bit set for each interrupt which has been processed
-* in order to clear the interrupts.  The definitions of each bit in the register
-* match the definition of the bits in the interrupt enable register.
-*
-* ARGUMENTS:
-*
-* InstancePtr contains a pointer to the DMA channel to operate on.
-*
-* RETURN VALUE:
-*
-* The interrupt status register contents of the specified DMA channel.
-* One or more of the following values may be contained the register.
-* Each of the values are unique bit masks.
-*
-*	XDC_IXR_DMA_DONE_MASK		The dma operation is done
-*	XDC_IXR_DMA_ERROR_MASK	    The dma operation had an error
-*	XDC_IXR_PKT_DONE_MASK	    A packet is complete
-*	XDC_IXR_PKT_THRESHOLD_MASK	The packet count threshold reached
-*	XDC_IXR_PKT_WAIT_BOUND_MASK The packet wait bound reached
-*	XDC_IXR_SG_DISABLE_ACK_MASK The scatter gather disable completed
-*	XDC_IXR_SG_END_MASK			Current descriptor was the end of the list
-*	XDC_IXR_BD_MASK				A buffer descriptor is done
-*
-* NOTES:
-*
-* None.
-*
-******************************************************************************/
-u32
-XDmaChannel_GetIntrStatus(XDmaChannel * InstancePtr)
-{
-	/* assert to verify input arguments */
-
-	XASSERT_NONVOID(InstancePtr != NULL);
-	XASSERT_NONVOID(InstancePtr->IsReady == XCOMPONENT_IS_READY);
-
-	/* return the contents of the interrupt status register */
-
-	return XIo_In32(InstancePtr->RegBaseAddress + XDC_IS_REG_OFFSET);
-}
-
-/******************************************************************************
-*
-* FUNCTION:
-*
-* XDmaChannel_SetIntrEnable
-*
-* DESCRIPTION:
-*
-* This function sets the interrupt enable register of the specified DMA
-* channel.  The interrupt enable register contains bits which enable
-* individual interrupts for the DMA channel.  The definitions of each bit
-* in the register match the definition of the bits in the interrupt status
-* register.
-*
-* ARGUMENTS:
-*
-* InstancePtr contains a pointer to the DMA channel to operate on.
-*
-* Enable contains the interrupt enable register contents to be written
-* in the DMA channel. One or more of the following values may be contained
-* the register. Each of the values are unique bit masks such that they may be
-* ORed together to enable multiple bits or inverted and ANDed to disable
-* multiple bits.
-*
-*	XDC_IXR_DMA_DONE_MASK		The dma operation is done
-*	XDC_IXR_DMA_ERROR_MASK	    The dma operation had an error
-*	XDC_IXR_PKT_DONE_MASK	    A packet is complete
-*	XDC_IXR_PKT_THRESHOLD_MASK	The packet count threshold reached
-*	XDC_IXR_PKT_WAIT_BOUND_MASK The packet wait bound reached
-*	XDC_IXR_SG_DISABLE_ACK_MASK The scatter gather disable completed
-*	XDC_IXR_SG_END_MASK			Current descriptor was the end of the list
-*	XDC_IXR_BD_MASK				A buffer descriptor is done
-*
-* RETURN VALUE:
-*
-* None.
-*
-* NOTES:
-*
-* None.
-*
-******************************************************************************/
-void
-XDmaChannel_SetIntrEnable(XDmaChannel * InstancePtr, u32 Enable)
-{
-	/* assert to verify input arguments except the enable which can't be
-	 * asserted since all values are valid
-	 */
-	XASSERT_VOID(InstancePtr != NULL);
-	XASSERT_VOID(InstancePtr->IsReady == XCOMPONENT_IS_READY);
-
-	/* set the interrupt enable register to the specified value */
-
-	XIo_Out32(InstancePtr->RegBaseAddress + XDC_IE_REG_OFFSET, Enable);
-}
-
-/******************************************************************************
-*
-* FUNCTION:
-*
-* XDmaChannel_GetIntrEnable
-*
-* DESCRIPTION:
-*
-* This function gets the interrupt enable of the DMA channel.  The
-* interrupt enable contains flags which enable individual interrupts for the
-* DMA channel. The definitions of each bit in the register match the definition
-* of the bits in the interrupt status register.
-*
-* ARGUMENTS:
-*
-* InstancePtr contains a pointer to the DMA channel to operate on.
-*
-* RETURN VALUE:
-*
-* The interrupt enable of the DMA channel.  One or more of the following values
-* may be contained the register. Each of the values are unique bit masks.
-*
-*	XDC_IXR_DMA_DONE_MASK		The dma operation is done
-*	XDC_IXR_DMA_ERROR_MASK	    The dma operation had an error
-*	XDC_IXR_PKT_DONE_MASK	    A packet is complete
-*	XDC_IXR_PKT_THRESHOLD_MASK	The packet count threshold reached
-*	XDC_IXR_PKT_WAIT_BOUND_MASK The packet wait bound reached
-*	XDC_IXR_SG_DISABLE_ACK_MASK The scatter gather disable completed
-*	XDC_IXR_BD_MASK				A buffer descriptor is done
-*
-* NOTES:
-*
-* None.
-*
-******************************************************************************/
-u32
-XDmaChannel_GetIntrEnable(XDmaChannel * InstancePtr)
-{
-	/* assert to verify input arguments */
-
-	XASSERT_NONVOID(InstancePtr != NULL);
-	XASSERT_NONVOID(InstancePtr->IsReady == XCOMPONENT_IS_READY);
-
-	/* return the contents of the interrupt enable register */
-
-	return XIo_In32(InstancePtr->RegBaseAddress + XDC_IE_REG_OFFSET);
-}
-
-/******************************************************************************
-*
-* FUNCTION:
-*
-* XDmaChannel_Transfer
-*
-* DESCRIPTION:
-*
-* This function starts the DMA channel transferring data from a memory source
-* to a memory destination. This function only starts the operation and returns
-* before the operation may be complete.  If the interrupt is enabled, an
-* interrupt will be generated when the operation is complete, otherwise it is
-* necessary to poll the channel status to determine when it's complete.  It is
-* the responsibility of the caller to determine when the operation is complete
-* by handling the generated interrupt or polling the status.  It is also the
-* responsibility of the caller to ensure that the DMA channel is not busy with
-* another transfer before calling this function.
-*
-* ARGUMENTS:
-*
-* InstancePtr contains a pointer to the DMA channel to operate on.
-*
-* SourcePtr contains a pointer to the source memory where the data is to
-* be tranferred from and must be 32 bit aligned.
-*
-* DestinationPtr contains a pointer to the destination memory where the data
-* is to be transferred and must be 32 bit aligned.
-*
-* ByteCount contains the number of bytes to transfer during the DMA operation.
-*
-* RETURN VALUE:
-*
-* None.
-*
-* NOTES:
-*
-* The DMA h/w will not currently allow a non-local memory transfer to non-local
-* memory (memory copy), but only allows a non-local memory to or from the device
-* memory (typically a FIFO).
-*
-* It is the responsibility of the caller to ensure that the cache is
-* flushed and invalidated both before and after the DMA operation completes
-* if the memory pointed to is cached. The caller must also ensure that the
-* pointers contain a physical address rather than a virtual address
-* if address translation is being used.
-*
-******************************************************************************/
-void
-XDmaChannel_Transfer(XDmaChannel * InstancePtr,
-		     u32 * SourcePtr, u32 * DestinationPtr, u32 ByteCount)
-{
-	/* assert to verify input arguments and the alignment of any arguments
-	 * which have expected alignments
-	 */
-	XASSERT_VOID(InstancePtr != NULL);
-	XASSERT_VOID(SourcePtr != NULL);
-	XASSERT_VOID(((u32) SourcePtr & 3) == 0);
-	XASSERT_VOID(DestinationPtr != NULL);
-	XASSERT_VOID(((u32) DestinationPtr & 3) == 0);
-	XASSERT_VOID(ByteCount != 0);
-	XASSERT_VOID(InstancePtr->IsReady == XCOMPONENT_IS_READY);
-
-	/* setup the source and destination address registers for the transfer */
-
-	XIo_Out32(InstancePtr->RegBaseAddress + XDC_SA_REG_OFFSET,
-		  (u32) SourcePtr);
-
-	XIo_Out32(InstancePtr->RegBaseAddress + XDC_DA_REG_OFFSET,
-		  (u32) DestinationPtr);
-
-	/* start the DMA transfer to copy from the source buffer to the
-	 * destination buffer by writing the length to the length register
-	 */
-	XIo_Out32(InstancePtr->RegBaseAddress + XDC_LEN_REG_OFFSET, ByteCount);
-}
diff --git a/board/xilinx/common/xdma_channel.h b/board/xilinx/common/xdma_channel.h
deleted file mode 100644
index 4685982..0000000
--- a/board/xilinx/common/xdma_channel.h
+++ /dev/null
@@ -1,291 +0,0 @@
-/******************************************************************************
-*
-*     Author: Xilinx, Inc.
-*
-*
-*     This program is free software; you can redistribute it and/or modify it
-*     under the terms of the GNU General Public License as published by the
-*     Free Software Foundation; either version 2 of the License, or (at your
-*     option) any later version.
-*
-*
-*     XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS" AS A
-*     COURTESY TO YOU. BY PROVIDING THIS DESIGN, CODE, OR INFORMATION AS
-*     ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE, APPLICATION OR STANDARD,
-*     XILINX IS MAKING NO REPRESENTATION THAT THIS IMPLEMENTATION IS FREE
-*     FROM ANY CLAIMS OF INFRINGEMENT, AND YOU ARE RESPONSIBLE FOR OBTAINING
-*     ANY THIRD PARTY RIGHTS YOU MAY REQUIRE FOR YOUR IMPLEMENTATION.
-*     XILINX EXPRESSLY DISCLAIMS ANY WARRANTY WHATSOEVER WITH RESPECT TO
-*     THE ADEQUACY OF THE IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY
-*     WARRANTIES OR REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM
-*     CLAIMS OF INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND
-*     FITNESS FOR A PARTICULAR PURPOSE.
-*
-*
-*     Xilinx hardware products are not intended for use in life support
-*     appliances, devices, or systems. Use in such applications is
-*     expressly prohibited.
-*
-*
-*     (c) Copyright 2002-2004 Xilinx Inc.
-*     All rights reserved.
-*
-*
-*     You should have received a copy of the GNU General Public License along
-*     with this program; if not, write to the Free Software Foundation, Inc.,
-*     675 Mass Ave, Cambridge, MA 02139, USA.
-*
-* FILENAME:
-*
-* xdma_channel.h
-*
-* DESCRIPTION:
-*
-* This file contains the DMA channel component implementation. This component
-* supports a distributed DMA design in which each device can have it's own
-* dedicated DMA channel, as opposed to a centralized DMA design.
-* A device which uses DMA typically contains two DMA channels, one for
-* sending data and the other for receiving data.
-*
-* This component is designed to be used as a basic building block for
-* designing a device driver. It provides registers accesses such that all
-* DMA processing can be maintained easier, but the device driver designer
-* must still understand all the details of the DMA channel.
-*
-* The DMA channel allows a CPU to minimize the CPU interaction required to move
-* data between a memory and a device.  The CPU requests the DMA channel to
-* perform a DMA operation and typically continues performing other processing
-* until the DMA operation completes.  DMA could be considered a primitive form
-* of multiprocessing such that caching and address translation can be an issue.
-*
-* Scatter Gather Operations
-*
-* The DMA channel may support scatter gather operations. A scatter gather
-* operation automates the DMA channel such that multiple buffers can be
-* sent or received with minimal software interaction with the hardware.  Buffer
-* descriptors, contained in the XBufDescriptor component, are used by the
-* scatter gather operations of the DMA channel to describe the buffers to be
-* processed.
-*
-* Scatter Gather List Operations
-*
-* A scatter gather list may be supported by each DMA channel.  The scatter
-* gather list allows buffer descriptors to be put into the list by a device
-* driver which requires scatter gather.  The hardware processes the buffer
-* descriptors which are contained in the list and modifies the buffer
-* descriptors to reflect the status of the DMA operations.  The device driver
-* is notified by interrupt that specific DMA events occur including scatter
-* gather events.  The device driver removes the completed buffer descriptors
-* from the scatter gather list to evaluate the status of each DMA operation.
-*
-* The scatter gather list is created and buffer descriptors are inserted into
-* the list.  Buffer descriptors are never removed from the list after it's
-* creation such that a put operation copies from a temporary buffer descriptor
-* to a buffer descriptor in the list.  Get operations don't copy from the list
-* to a temporary, but return a pointer to the buffer descriptor in the list.
-* A buffer descriptor in the list may be locked to prevent it from being
-* overwritten by a put operation.  This allows the device driver to get a
-* descriptor from a scatter gather list and prevent it from being overwritten
-* until the buffer associated with the buffer descriptor has been processed.
-*
-* Typical Scatter Gather Processing
-*
-* The following steps illustrate the typical processing to use the
-* scatter gather features of a DMA channel.
-*
-* 1. Create a scatter gather list for the DMA channel which puts empty buffer
-*    descriptors into the list.
-* 2. Create buffer descriptors which describe the buffers to be filled with
-*	 receive data or the buffers which contain data to be sent.
-* 3. Put buffer descriptors into the DMA channel scatter list such that scatter
-*    gather operations are requested.
-* 4. Commit the buffer descriptors in the list such that they are ready to be
-*    used by the DMA channel hardware.
-* 5. Start the scatter gather operations of the DMA channel.
-* 6. Process any interrupts which occur as a result of the scatter gather
-*    operations or poll the DMA channel to determine the status.
-*
-* Interrupts
-*
-* Each DMA channel has the ability to generate an interrupt.  This component
-* does not perform processing for the interrupt as this processing is typically
-* tightly coupled with the device which is using the DMA channel.  It is the
-* responsibility of the caller of DMA functions to manage the interrupt
-* including connecting to the interrupt and enabling/disabling the interrupt.
-*
-* Critical Sections
-*
-* It is the responsibility of the device driver designer to use critical
-* sections as necessary when calling functions of the DMA channel.  This
-* component does not use critical sections and it does access registers using
-* read-modify-write operations.  Calls to DMA functions from a main thread
-* and from an interrupt context could produce unpredictable behavior such that
-* the caller must provide the appropriate critical sections.
-*
-* Address Translation
-*
-* All addresses of data structures which are passed to DMA functions must
-* be physical (real) addresses as opposed to logical (virtual) addresses.
-*
-* Caching
-*
-* The memory which is passed to the function which creates the scatter gather
-* list must not be cached such that buffer descriptors are non-cached.  This
-* is necessary because the buffer descriptors are kept in a ring buffer and
-* not directly accessible to the caller of DMA functions.
-*
-* The caller of DMA functions is responsible for ensuring that any data
-* buffers which are passed to the DMA channel are cache-line aligned if
-* necessary.
-*
-* The caller of DMA functions is responsible for ensuring that any data
-* buffers which are passed to the DMA channel have been flushed from the cache.
-*
-* The caller of DMA functions is responsible for ensuring that the cache is
-* invalidated prior to using any data buffers which are the result of a DMA
-* operation.
-*
-* Memory Alignment
-*
-* The addresses of data buffers which are passed to DMA functions must be
-* 32 bit word aligned since the DMA hardware performs 32 bit word transfers.
-*
-* Mutual Exclusion
-*
-* The functions of the DMA channel are not thread safe such that the caller
-* of all DMA functions is responsible for ensuring mutual exclusion for a
-* DMA channel.  Mutual exclusion across multiple DMA channels is not
-* necessary.
-*
-* NOTES:
-*
-* Many of the provided functions which are register accessors don't provide
-* a lot of error detection. The caller is expected to understand the impact
-* of a function call based upon the current state of the DMA channel.  This
-* is done to minimize the overhead in this component.
-*
-******************************************************************************/
-
-#ifndef XDMA_CHANNEL_H		/* prevent circular inclusions */
-#define XDMA_CHANNEL_H		/* by using protection macros */
-
-/***************************** Include Files *********************************/
-
-#include "xdma_channel_i.h"	/* constants shared with buffer descriptor */
-#include "xbasic_types.h"
-#include "xstatus.h"
-#include "xversion.h"
-#include "xbuf_descriptor.h"
-
-/************************** Constant Definitions *****************************/
-
-/* the following constants provide access to the bit fields of the DMA control
- * register (DMACR)
- */
-#define XDC_DMACR_SOURCE_INCR_MASK	0x80000000UL	/* increment source address */
-#define XDC_DMACR_DEST_INCR_MASK	0x40000000UL	/* increment dest address */
-#define XDC_DMACR_SOURCE_LOCAL_MASK 0x20000000UL	/* local source address */
-#define XDC_DMACR_DEST_LOCAL_MASK	0x10000000UL	/* local dest address */
-#define XDC_DMACR_SG_DISABLE_MASK	0x08000000UL	/* scatter gather disable */
-#define XDC_DMACR_GEN_BD_INTR_MASK	0x04000000UL	/* descriptor interrupt */
-#define XDC_DMACR_LAST_BD_MASK		XDC_CONTROL_LAST_BD_MASK	/* last buffer */
-															 /*     descriptor  */
-
-/* the following constants provide access to the bit fields of the DMA status
- * register (DMASR)
- */
-#define XDC_DMASR_BUSY_MASK			0x80000000UL	/* channel is busy */
-#define XDC_DMASR_BUS_ERROR_MASK	0x40000000UL	/* bus error occurred */
-#define XDC_DMASR_BUS_TIMEOUT_MASK	0x20000000UL	/* bus timeout occurred */
-#define XDC_DMASR_LAST_BD_MASK		XDC_STATUS_LAST_BD_MASK	/* last buffer */
-														    /* descriptor  */
-#define XDC_DMASR_SG_BUSY_MASK		0x08000000UL	/* scatter gather is busy */
-
-/* the following constants provide access to the bit fields of the interrupt
- * status register (ISR) and the interrupt enable register (IER), bit masks
- * match for both registers such that they are named IXR
- */
-#define XDC_IXR_DMA_DONE_MASK		0x1UL	/* dma operation done */
-#define XDC_IXR_DMA_ERROR_MASK	    0x2UL	/* dma operation error */
-#define XDC_IXR_PKT_DONE_MASK	    0x4UL	/* packet done */
-#define XDC_IXR_PKT_THRESHOLD_MASK	0x8UL	/* packet count threshold */
-#define XDC_IXR_PKT_WAIT_BOUND_MASK 0x10UL	/* packet wait bound reached */
-#define XDC_IXR_SG_DISABLE_ACK_MASK 0x20UL	/* scatter gather disable
-						   acknowledge occurred */
-#define XDC_IXR_SG_END_MASK			0x40UL	/* last buffer descriptor
-							   disabled scatter gather */
-#define XDC_IXR_BD_MASK				0x80UL	/* buffer descriptor done */
-
-/**************************** Type Definitions *******************************/
-
-/*
- * the following structure contains data which is on a per instance basis
- * for the XDmaChannel component
- */
-typedef struct XDmaChannelTag {
-	XVersion Version;	/* version of the driver */
-	u32 RegBaseAddress;	/* base address of registers */
-	u32 IsReady;		/* device is initialized and ready */
-
-	XBufDescriptor *PutPtr;	/* keep track of where to put into list */
-	XBufDescriptor *GetPtr;	/* keep track of where to get from list */
-	XBufDescriptor *CommitPtr;	/* keep track of where to commit in list */
-	XBufDescriptor *LastPtr;	/* keep track of the last put in the list */
-	u32 TotalDescriptorCount;	/* total # of descriptors in the list */
-	u32 ActiveDescriptorCount;	/* # of descriptors pointing to buffers
-					   * in the buffer descriptor list */
-} XDmaChannel;
-
-/***************** Macros (Inline Functions) Definitions *********************/
-
-/************************** Function Prototypes ******************************/
-
-XStatus XDmaChannel_Initialize(XDmaChannel * InstancePtr, u32 BaseAddress);
-u32 XDmaChannel_IsReady(XDmaChannel * InstancePtr);
-XVersion *XDmaChannel_GetVersion(XDmaChannel * InstancePtr);
-XStatus XDmaChannel_SelfTest(XDmaChannel * InstancePtr);
-void XDmaChannel_Reset(XDmaChannel * InstancePtr);
-
-/* Control functions */
-
-u32 XDmaChannel_GetControl(XDmaChannel * InstancePtr);
-void XDmaChannel_SetControl(XDmaChannel * InstancePtr, u32 Control);
-
-/* Status functions */
-
-u32 XDmaChannel_GetStatus(XDmaChannel * InstancePtr);
-void XDmaChannel_SetIntrStatus(XDmaChannel * InstancePtr, u32 Status);
-u32 XDmaChannel_GetIntrStatus(XDmaChannel * InstancePtr);
-void XDmaChannel_SetIntrEnable(XDmaChannel * InstancePtr, u32 Enable);
-u32 XDmaChannel_GetIntrEnable(XDmaChannel * InstancePtr);
-
-/* DMA without scatter gather functions */
-
-void XDmaChannel_Transfer(XDmaChannel * InstancePtr,
-			  u32 * SourcePtr, u32 * DestinationPtr, u32 ByteCount);
-
-/* Scatter gather functions */
-
-XStatus XDmaChannel_SgStart(XDmaChannel * InstancePtr);
-XStatus XDmaChannel_SgStop(XDmaChannel * InstancePtr,
-			   XBufDescriptor ** BufDescriptorPtr);
-XStatus XDmaChannel_CreateSgList(XDmaChannel * InstancePtr,
-				 u32 * MemoryPtr, u32 ByteCount);
-u32 XDmaChannel_IsSgListEmpty(XDmaChannel * InstancePtr);
-
-XStatus XDmaChannel_PutDescriptor(XDmaChannel * InstancePtr,
-				  XBufDescriptor * BufDescriptorPtr);
-XStatus XDmaChannel_CommitPuts(XDmaChannel * InstancePtr);
-XStatus XDmaChannel_GetDescriptor(XDmaChannel * InstancePtr,
-				  XBufDescriptor ** BufDescriptorPtr);
-
-/* Packet functions for interrupt collescing */
-
-u32 XDmaChannel_GetPktCount(XDmaChannel * InstancePtr);
-void XDmaChannel_DecrementPktCount(XDmaChannel * InstancePtr);
-XStatus XDmaChannel_SetPktThreshold(XDmaChannel * InstancePtr, u8 Threshold);
-u8 XDmaChannel_GetPktThreshold(XDmaChannel * InstancePtr);
-void XDmaChannel_SetPktWaitBound(XDmaChannel * InstancePtr, u32 WaitBound);
-u32 XDmaChannel_GetPktWaitBound(XDmaChannel * InstancePtr);
-
-#endif				/* end of protection macro */
diff --git a/board/xilinx/common/xdma_channel_i.h b/board/xilinx/common/xdma_channel_i.h
deleted file mode 100644
index e9f343b..0000000
--- a/board/xilinx/common/xdma_channel_i.h
+++ /dev/null
@@ -1,110 +0,0 @@
-/******************************************************************************
-*
-*     Author: Xilinx, Inc.
-*
-*
-*     This program is free software; you can redistribute it and/or modify it
-*     under the terms of the GNU General Public License as published by the
-*     Free Software Foundation; either version 2 of the License, or (at your
-*     option) any later version.
-*
-*
-*     XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS" AS A
-*     COURTESY TO YOU. BY PROVIDING THIS DESIGN, CODE, OR INFORMATION AS
-*     ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE, APPLICATION OR STANDARD,
-*     XILINX IS MAKING NO REPRESENTATION THAT THIS IMPLEMENTATION IS FREE
-*     FROM ANY CLAIMS OF INFRINGEMENT, AND YOU ARE RESPONSIBLE FOR OBTAINING
-*     ANY THIRD PARTY RIGHTS YOU MAY REQUIRE FOR YOUR IMPLEMENTATION.
-*     XILINX EXPRESSLY DISCLAIMS ANY WARRANTY WHATSOEVER WITH RESPECT TO
-*     THE ADEQUACY OF THE IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY
-*     WARRANTIES OR REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM
-*     CLAIMS OF INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND
-*     FITNESS FOR A PARTICULAR PURPOSE.
-*
-*
-*     Xilinx hardware products are not intended for use in life support
-*     appliances, devices, or systems. Use in such applications is
-*     expressly prohibited.
-*
-*
-*     (c) Copyright 2002-2004 Xilinx Inc.
-*     All rights reserved.
-*
-*
-*     You should have received a copy of the GNU General Public License along
-*     with this program; if not, write to the Free Software Foundation, Inc.,
-*     675 Mass Ave, Cambridge, MA 02139, USA.
-*
-* FILENAME:
-*
-* xdma_channel_i.h
-*
-* DESCRIPTION:
-*
-* This file contains data which is shared internal data for the DMA channel
-* component. It is also shared with the buffer descriptor component which is
-* very tightly coupled with the DMA channel component.
-*
-* NOTES:
-*
-* The last buffer descriptor constants must be located here to prevent a
-* circular dependency between the DMA channel component and the buffer
-* descriptor component.
-*
-******************************************************************************/
-
-#ifndef XDMA_CHANNEL_I_H	/* prevent circular inclusions */
-#define XDMA_CHANNEL_I_H	/* by using protection macros */
-
-/***************************** Include Files *********************************/
-
-#include "xbasic_types.h"
-#include "xstatus.h"
-#include "xversion.h"
-
-/************************** Constant Definitions *****************************/
-
-#define XDC_DMA_CHANNEL_V1_00_A		"1.00a"
-
-/* the following constant provides access to the bit fields of the DMA control
- * register (DMACR) which must be shared between the DMA channel component
- * and the buffer descriptor component
- */
-#define XDC_CONTROL_LAST_BD_MASK	0x02000000UL	/* last buffer descriptor */
-
-/* the following constant provides access to the bit fields of the DMA status
- * register (DMASR) which must be shared between the DMA channel component
- * and the buffer descriptor component
- */
-#define XDC_STATUS_LAST_BD_MASK		0x10000000UL	/* last buffer descriptor */
-
-/* the following constants provide access to each of the registers of a DMA
- * channel
- */
-#define XDC_RST_REG_OFFSET	0	/* reset register */
-#define XDC_MI_REG_OFFSET	0	/* module information register */
-#define XDC_DMAC_REG_OFFSET	4	/* DMA control register */
-#define XDC_SA_REG_OFFSET	8	/* source address register */
-#define XDC_DA_REG_OFFSET	12	/* destination address register */
-#define XDC_LEN_REG_OFFSET	16	/* length register */
-#define XDC_DMAS_REG_OFFSET	20	/* DMA status register */
-#define XDC_BDA_REG_OFFSET	24	/* buffer descriptor address register */
-#define XDC_SWCR_REG_OFFSET 28	/* software control register */
-#define XDC_UPC_REG_OFFSET	32	/* unserviced packet count register */
-#define	XDC_PCT_REG_OFFSET	36	/* packet count threshold register */
-#define XDC_PWB_REG_OFFSET	40	/* packet wait bound register */
-#define XDC_IS_REG_OFFSET	44	/* interrupt status register */
-#define XDC_IE_REG_OFFSET	48	/* interrupt enable register */
-
-/* the following constant is written to the reset register to reset the
- * DMA channel
- */
-#define XDC_RESET_MASK				0x0000000AUL
-
-/**************************** Type Definitions *******************************/
-
-/***************** Macros (Inline Functions) Definitions *********************/
-
-/************************** Function Prototypes ******************************/
-
-#endif				/* end of protection macro */
diff --git a/board/xilinx/common/xdma_channel_sg.c b/board/xilinx/common/xdma_channel_sg.c
deleted file mode 100644
index a8e9462..0000000
--- a/board/xilinx/common/xdma_channel_sg.c
+++ /dev/null
@@ -1,1317 +0,0 @@
-/* $Id: xdma_channel_sg.c,v 1.6 2003/02/03 19:50:33 moleres Exp $ */
-/******************************************************************************
-*
-*     Author: Xilinx, Inc.
-*
-*
-*     This program is free software; you can redistribute it and/or modify it
-*     under the terms of the GNU General Public License as published by the
-*     Free Software Foundation; either version 2 of the License, or (at your
-*     option) any later version.
-*
-*
-*     XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS" AS A
-*     COURTESY TO YOU. BY PROVIDING THIS DESIGN, CODE, OR INFORMATION AS
-*     ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE, APPLICATION OR STANDARD,
-*     XILINX IS MAKING NO REPRESENTATION THAT THIS IMPLEMENTATION IS FREE
-*     FROM ANY CLAIMS OF INFRINGEMENT, AND YOU ARE RESPONSIBLE FOR OBTAINING
-*     ANY THIRD PARTY RIGHTS YOU MAY REQUIRE FOR YOUR IMPLEMENTATION.
-*     XILINX EXPRESSLY DISCLAIMS ANY WARRANTY WHATSOEVER WITH RESPECT TO
-*     THE ADEQUACY OF THE IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY
-*     WARRANTIES OR REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM
-*     CLAIMS OF INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND
-*     FITNESS FOR A PARTICULAR PURPOSE.
-*
-*
-*     Xilinx hardware products are not intended for use in life support
-*     appliances, devices, or systems. Use in such applications is
-*     expressly prohibited.
-*
-*
-*     (c) Copyright 2002-2004 Xilinx Inc.
-*     All rights reserved.
-*
-*
-*     You should have received a copy of the GNU General Public License along
-*     with this program; if not, write to the Free Software Foundation, Inc.,
-*     675 Mass Ave, Cambridge, MA 02139, USA.
-*
-* FILENAME:
-*
-* xdma_channel_sg.c
-*
-* DESCRIPTION:
-*
-* This file contains the implementation of the XDmaChannel component which is
-* related to scatter gather operations.
-*
-* Scatter Gather Operations
-*
-* The DMA channel may support scatter gather operations. A scatter gather
-* operation automates the DMA channel such that multiple buffers can be
-* sent or received with minimal software interaction with the hardware.	 Buffer
-* descriptors, contained in the XBufDescriptor component, are used by the
-* scatter gather operations of the DMA channel to describe the buffers to be
-* processed.
-*
-* Scatter Gather List Operations
-*
-* A scatter gather list may be supported by each DMA channel.  The scatter
-* gather list allows buffer descriptors to be put into the list by a device
-* driver which requires scatter gather.	 The hardware processes the buffer
-* descriptors which are contained in the list and modifies the buffer
-* descriptors to reflect the status of the DMA operations.  The device driver
-* is notified by interrupt that specific DMA events occur including scatter
-* gather events.  The device driver removes the completed buffer descriptors
-* from the scatter gather list to evaluate the status of each DMA operation.
-*
-* The scatter gather list is created and buffer descriptors are inserted into
-* the list.  Buffer descriptors are never removed from the list after it's
-* creation such that a put operation copies from a temporary buffer descriptor
-* to a buffer descriptor in the list.  Get operations don't copy from the list
-* to a temporary, but return a pointer to the buffer descriptor in the list.
-* A buffer descriptor in the list may be locked to prevent it from being
-* overwritten by a put operation.  This allows the device driver to get a
-* descriptor from a scatter gather list and prevent it from being overwritten
-* until the buffer associated with the buffer descriptor has been processed.
-*
-* The get and put functions only operate on the list and are asynchronous from
-* the hardware which may be using the list of descriptors.  This is important
-* because there are no checks in the get and put functions to ensure that the
-* hardware has processed the descriptors.  This must be handled by the driver
-* using the DMA scatter gather channel through the use of the other functions.
-* When a scatter gather operation is started, the start function does ensure
-* that the descriptor to start has not already been processed by the hardware
-* and is not the first of a series of descriptors that have not been committed
-* yet.
-*
-* Descriptors are put into the list but not marked as ready to use by the
-* hardware until a commit operation is done.  This allows multiple descriptors
-* which may contain a single packet of information for a protocol to be
-* guaranteed not to cause any underflow conditions during transmission. The
-* hardware design only allows descriptors to cause it to stop after a descriptor
-* has been processed rather than before it is processed.  A series of
-* descriptors are put into the list followed by a commit operation, or each
-* descriptor may be commited.  A commit operation is performed by changing a
-* single descriptor, the first of the series of puts, to indicate that the
-* hardware may now use all descriptors after it.  The last descriptor in the
-* list is always set to cause the hardware to stop after it is processed.
-*
-* Typical Scatter Gather Processing
-*
-* The following steps illustrate the typical processing to use the
-* scatter gather features of a DMA channel.
-*
-* 1. Create a scatter gather list for the DMA channel which puts empty buffer
-*    descriptors into the list.
-* 2. Create buffer descriptors which describe the buffers to be filled with
-*    receive data or the buffers which contain data to be sent.
-* 3. Put buffer descriptors into the DMA channel scatter list such that scatter
-*    gather operations are requested.
-* 4. Commit the buffer descriptors in the list such that they are ready to be
-*    used by the DMA channel hardware.
-* 5. Start the scatter gather operations of the DMA channel.
-* 6. Process any interrupts which occur as a result of the scatter gather
-*    operations or poll the DMA channel to determine the status.  This may
-*    be accomplished by getting the packet count for the channel and then
-*    getting the appropriate number of descriptors from the list for that
-*    number of packets.
-*
-* Minimizing Interrupts
-*
-* The Scatter Gather operating mode is designed to reduce the amount of CPU
-* throughput necessary to manage the hardware for devices. A key to the CPU
-* throughput is the number and rate of interrupts that the CPU must service.
-* Devices with higher data rates can cause larger numbers of interrupts and
-* higher frequency interrupts. Ideally the number of interrupts can be reduced
-* by only generating an interrupt when a specific amount of data has been
-* received from the interface. This design suffers from a lack of interrupts
-* when the amount of data received is less than the specified amount of data
-* to generate an interrupt. In order to help minimize the number of interrupts
-* which the CPU must service, an algorithm referred to as "interrupt coalescing"
-* is utilized.
-*
-* Interrupt Coalescing
-*
-* The principle of interrupt coalescing is to wait before generating an
-* interrupt until a certain number of packets have been received or sent. An
-* interrupt is also generated if a smaller number of packets have been received
-* followed by a certain period of time with no packet reception. This is a
-* trade-off of latency for bandwidth and is accomplished using several
-* mechanisms of the hardware including a counter for packets received or
-* transmitted and a packet timer. These two hardware mechanisms work in
-* combination to allow a reduction in the number of interrupts processed by the
-* CPU for packet reception.
-*
-* Unserviced Packet Count
-*
-* The purpose of the packet counter is to count the number of packets received
-* or transmitted and provide an interrupt when a specific number of packets
-* have been processed by the hardware. An interrupt is generated whenever the
-* counter is greater than or equal to the Packet Count Threshold. This counter
-* contains an accurate count of the number of packets that the hardware has
-* processed, either received or transmitted, and the software has not serviced.
-*
-* The packet counter allows the number of interrupts to be reduced by waiting
-* to generate an interrupt until enough packets are received. For packet
-* reception, packet counts of less than the number to generate an interrupt
-* would not be serviced without the addition of a packet timer. This counter is
-* continuously updated by the hardware, not latched to the value at the time
-* the interrupt occurred.
-*
-* The packet counter can be used within the interrupt service routine for the
-* device to reduce the number of interrupts. The interrupt service routine
-* loops while performing processing for each packet which has been received or
-* transmitted and decrements the counter by a specified value. At the same time,
-* the hardware is possibly continuing to receive or transmit more packets such
-* that the software may choose, based upon the value in the packet counter, to
-* remain in the interrupt service routine rather than exiting and immediately
-* returning. This feature should be used with caution as reducing the number of
-* interrupts is beneficial, but unbounded interrupt processing is not desirable.
-*
-* Since the hardware may be incrementing the packet counter simultaneously
-* with the software decrementing the counter, there is a need for atomic
-* operations. The hardware ensures that the operation is atomic such that
-* simultaneous accesses are properly handled.
-*
-* Packet Wait Bound
-*
-* The purpose of the packet wait bound is to augment the unserviced packet
-* count. Whenever there is no pending interrupt for the channel and the
-* unserviced packet count is non-zero, a timer starts counting timeout at the
-* value contained the the packet wait bound register.  If the timeout is
-* reached, an interrupt is generated such that the software may service the
-* data which was buffered.
-*
-* NOTES:
-*
-* Special Test Conditions:
-*
-* The scatter gather list processing must be thoroughly tested if changes are
-* made.	 Testing should include putting and committing single descriptors and
-* putting multiple descriptors followed by a single commit.  There are some
-* conditions in the code which handle the exception conditions.
-*
-* The Put Pointer points to the next location in the descriptor list to copy
-* in a new descriptor. The Get Pointer points to the next location in the
-* list to get a descriptor from.  The Get Pointer only allows software to
-* have a traverse the list after the hardware has finished processing some
-* number of descriptors.  The Commit Pointer points to the descriptor in the
-* list which is to be committed.  It is also used to determine that no
-* descriptor is waiting to be commited (NULL).	The Last Pointer points to
-* the last descriptor that was put into the list.  It typically points
-* to the previous descriptor to the one pointed to by the Put Pointer.
-* Comparisons are done between these pointers to determine when the following
-* special conditions exist.
-
-* Single Put And Commit
-*
-* The buffer descriptor is ready to be used by the hardware so it is important
-* for the descriptor to not appear to be waiting to be committed.  The commit
-* pointer is reset when a commit is done indicating there are no descriptors
-* waiting to be committed.  In all cases but this one, the descriptor is
-* changed to cause the hardware to go to the next descriptor after processing
-* this one.  But in this case, this is the last descriptor in the list such
-* that it must not be changed.
-*
-* 3 Or More Puts And Commit
-*
-* A series of 3 or more puts followed by a single commit is different in that
-* only the 1st descriptor put into the list is changed when the commit is done.
-* This requires each put starting on the 3rd to change the previous descriptor
-* so that it allows the hardware to continue to the next descriptor in the list.
-*
-* The 1st Put Following A Commit
-*
-* The commit caused the commit pointer to be NULL indicating that there are no
-* descriptors waiting to be committed.	It is necessary for the next put to set
-* the commit pointer so that a commit must follow the put for the hardware to
-* use the descriptor.
-*
-* <pre>
-* MODIFICATION HISTORY:
-*
-* Ver	Who  Date     Changes
-* ----- ---- -------- ------------------------------------------------------
-* 1.00a rpm  02/03/03 Removed the XST_DMA_SG_COUNT_EXCEEDED return code
-*		      from SetPktThreshold.
-* </pre>
-*
-******************************************************************************/
-
-/***************************** Include Files *********************************/
-
-#include "xdma_channel.h"
-#include "xbasic_types.h"
-#include "xio.h"
-#include "xbuf_descriptor.h"
-#include "xstatus.h"
-
-/************************** Constant Definitions *****************************/
-
-#define XDC_SWCR_SG_ENABLE_MASK 0x80000000UL	/* scatter gather enable */
-
-/**************************** Type Definitions *******************************/
-
-/***************** Macros (Inline Functions) Definitions *********************/
-
-/* the following macro copies selected fields of a buffer descriptor to another
- * buffer descriptor, this was provided by the buffer descriptor component but
- * was moved here since it is only used internally to this component and since
- * it does not copy all fields
- */
-#define CopyBufferDescriptor(InstancePtr, DestinationPtr)	   \
-{								   \
-    *((u32 *)DestinationPtr + XBD_CONTROL_OFFSET) =	       \
-	*((u32 *)InstancePtr + XBD_CONTROL_OFFSET);	       \
-    *((u32 *)DestinationPtr + XBD_SOURCE_OFFSET) =	       \
-	*((u32 *)InstancePtr + XBD_SOURCE_OFFSET);	       \
-    *((u32 *)DestinationPtr + XBD_DESTINATION_OFFSET) =	       \
-	*((u32 *)InstancePtr + XBD_DESTINATION_OFFSET);	       \
-    *((u32 *)DestinationPtr + XBD_LENGTH_OFFSET) =	       \
-	*((u32 *)InstancePtr + XBD_LENGTH_OFFSET);	       \
-    *((u32 *)DestinationPtr + XBD_STATUS_OFFSET) =	       \
-	*((u32 *)InstancePtr + XBD_STATUS_OFFSET);	       \
-    *((u32 *)DestinationPtr + XBD_DEVICE_STATUS_OFFSET) =      \
-	*((u32 *)InstancePtr + XBD_DEVICE_STATUS_OFFSET);      \
-    *((u32 *)DestinationPtr + XBD_ID_OFFSET) =		       \
-	*((u32 *)InstancePtr + XBD_ID_OFFSET);		       \
-    *((u32 *)DestinationPtr + XBD_FLAGS_OFFSET) =	       \
-	*((u32 *)InstancePtr + XBD_FLAGS_OFFSET);	       \
-    *((u32 *)DestinationPtr + XBD_RQSTED_LENGTH_OFFSET) =      \
-	*((u32 *)InstancePtr + XBD_RQSTED_LENGTH_OFFSET);      \
-}
-
-/************************** Variable Definitions *****************************/
-
-/************************** Function Prototypes ******************************/
-
-/******************************************************************************
-*
-* FUNCTION:
-*
-* XDmaChannel_SgStart
-*
-* DESCRIPTION:
-*
-* This function starts a scatter gather operation for a scatter gather
-* DMA channel.	The first buffer descriptor in the buffer descriptor list
-* will be started with the scatter gather operation.  A scatter gather list
-* should have previously been created for the DMA channel and buffer
-* descriptors put into the scatter gather list such that there are scatter
-* operations ready to be performed.
-*
-* ARGUMENTS:
-*
-* InstancePtr contains a pointer to the DMA channel to operate on.  The DMA
-* channel should be configured to use scatter gather in order for this function
-* to be called.
-*
-* RETURN VALUE:
-*
-* A status containing XST_SUCCESS if scatter gather was started successfully
-* for the DMA channel.
-*
-* A value of XST_DMA_SG_NO_LIST indicates the scatter gather list has not
-* been created.
-*
-* A value of XST_DMA_SG_LIST_EMPTY indicates scatter gather was not started
-* because the scatter gather list of the DMA channel does not contain any
-* buffer descriptors that are ready to be processed by the hardware.
-*
-* A value of XST_DMA_SG_IS_STARTED indicates scatter gather was not started
-* because the scatter gather was not stopped, but was already started.
-*
-* A value of XST_DMA_SG_BD_NOT_COMMITTED indicates the buffer descriptor of
-* scatter gather list which was to be started is not committed to the list.
-* This status is more likely if this function is being called from an ISR
-* and non-ISR processing is putting descriptors into the list.
-*
-* A value of XST_DMA_SG_NO_DATA indicates that the buffer descriptor of the
-* scatter gather list which was to be started had already been used by the
-* hardware for a DMA transfer that has been completed.
-*
-* NOTES:
-*
-* It is the responsibility of the caller to get all the buffer descriptors
-* after performing a stop operation and before performing a start operation.
-* If buffer descriptors are not retrieved between stop and start operations,
-* buffer descriptors may be processed by the hardware more than once.
-*
-******************************************************************************/
-XStatus
-XDmaChannel_SgStart(XDmaChannel * InstancePtr)
-{
-	u32 Register;
-	XBufDescriptor *LastDescriptorPtr;
-
-	/* assert to verify input arguments */
-
-	XASSERT_NONVOID(InstancePtr != NULL);
-	XASSERT_NONVOID(InstancePtr->IsReady == XCOMPONENT_IS_READY);
-
-	/* if a scatter gather list has not been created yet, return a status */
-
-	if (InstancePtr->TotalDescriptorCount == 0) {
-		return XST_DMA_SG_NO_LIST;
-	}
-
-	/* if the scatter gather list exists but is empty then return a status */
-
-	if (XDmaChannel_IsSgListEmpty(InstancePtr)) {
-		return XST_DMA_SG_LIST_EMPTY;
-	}
-
-	/* if scatter gather is busy for the DMA channel, return a status because
-	 * restarting it could lose data
-	 */
-
-	Register = XIo_In32(InstancePtr->RegBaseAddress + XDC_DMAS_REG_OFFSET);
-	if (Register & XDC_DMASR_SG_BUSY_MASK) {
-		return XST_DMA_SG_IS_STARTED;
-	}
-
-	/* get the address of the last buffer descriptor which the DMA hardware
-	 * finished processing
-	 */
-	LastDescriptorPtr =
-	    (XBufDescriptor *) XIo_In32(InstancePtr->RegBaseAddress +
-					XDC_BDA_REG_OFFSET);
-
-	/* setup the first buffer descriptor that will be sent when the scatter
-	 * gather channel is enabled, this is only necessary one time since
-	 * the BDA register of the channel maintains the last buffer descriptor
-	 * processed
-	 */
-	if (LastDescriptorPtr == NULL) {
-		XIo_Out32(InstancePtr->RegBaseAddress + XDC_BDA_REG_OFFSET,
-			  (u32) InstancePtr->GetPtr);
-	} else {
-		XBufDescriptor *NextDescriptorPtr;
-
-		/* get the next descriptor to be started, if the status indicates it
-		 * hasn't already been used by the h/w, then it's OK to start it,
-		 * s/w sets the status of each descriptor to busy and then h/w clears
-		 * the busy when it is complete
-		 */
-		NextDescriptorPtr =
-		    XBufDescriptor_GetNextPtr(LastDescriptorPtr);
-
-		if ((XBufDescriptor_GetStatus(NextDescriptorPtr) &
-		     XDC_DMASR_BUSY_MASK) == 0) {
-			return XST_DMA_SG_NO_DATA;
-		}
-		/* don't start the DMA SG channel if the descriptor to be processed
-		 * by h/w is to be committed by the s/w, this function can be called
-		 * such that it interrupts a thread that was putting into the list
-		 */
-		if (NextDescriptorPtr == InstancePtr->CommitPtr) {
-			return XST_DMA_SG_BD_NOT_COMMITTED;
-		}
-	}
-
-	/* start the scatter gather operation by clearing the stop bit in the
-	 * control register and setting the enable bit in the s/w control register,
-	 * both of these are necessary to cause it to start, right now the order of
-	 * these statements is important, the software control register should be
-	 * set 1st.  The other order can cause the CPU to have a loss of sync
-	 * because it cannot read/write the register while the DMA operation is
-	 * running
-	 */
-
-	Register = XIo_In32(InstancePtr->RegBaseAddress + XDC_SWCR_REG_OFFSET);
-
-	XIo_Out32(InstancePtr->RegBaseAddress + XDC_SWCR_REG_OFFSET,
-		  Register | XDC_SWCR_SG_ENABLE_MASK);
-
-	Register = XIo_In32(InstancePtr->RegBaseAddress + XDC_DMAC_REG_OFFSET);
-
-	XIo_Out32(InstancePtr->RegBaseAddress + XDC_DMAC_REG_OFFSET,
-		  Register & ~XDC_DMACR_SG_DISABLE_MASK);
-
-	/* indicate the DMA channel scatter gather operation was started
-	 * successfully
-	 */
-	return XST_SUCCESS;
-}
-
-/******************************************************************************
-*
-* FUNCTION:
-*
-* XDmaChannel_SgStop
-*
-* DESCRIPTION:
-*
-* This function stops a scatter gather operation for a scatter gather
-* DMA channel. This function starts the process of stopping a scatter
-* gather operation that is in progress and waits for the stop to be completed.
-* Since it waits for the operation to stopped before returning, this function
-* could take an amount of time relative to the size of the DMA scatter gather
-* operation which is in progress.  The scatter gather list of the DMA channel
-* is not modified by this function such that starting the scatter gather
-* channel after stopping it will cause it to resume.  This operation is
-* considered to be a graceful stop in that the scatter gather operation
-* completes the current buffer descriptor before stopping.
-*
-* If the interrupt is enabled, an interrupt will be generated when the
-* operation is stopped and the caller is responsible for handling the
-* interrupt.
-*
-* ARGUMENTS:
-*
-* InstancePtr contains a pointer to the DMA channel to operate on.  The DMA
-* channel should be configured to use scatter gather in order for this function
-* to be called.
-*
-* BufDescriptorPtr is also a return value which contains a pointer to the
-* buffer descriptor which the scatter gather operation completed when it
-* was stopped.
-*
-* RETURN VALUE:
-*
-* A status containing XST_SUCCESS if scatter gather was stopped successfully
-* for the DMA channel.
-*
-* A value of XST_DMA_SG_IS_STOPPED indicates scatter gather was not stoppped
-* because the scatter gather is not started, but was already stopped.
-*
-* BufDescriptorPtr contains a pointer to the buffer descriptor which was
-* completed when the operation was stopped.
-*
-* NOTES:
-*
-* This function implements a loop which polls the hardware for an infinite
-* amount of time. If the hardware is not operating correctly, this function
-* may never return.
-*
-******************************************************************************/
-XStatus
-XDmaChannel_SgStop(XDmaChannel * InstancePtr,
-		   XBufDescriptor ** BufDescriptorPtr)
-{
-	u32 Register;
-
-	/* assert to verify input arguments */
-
-	XASSERT_NONVOID(InstancePtr != NULL);
-	XASSERT_NONVOID(BufDescriptorPtr != NULL);
-	XASSERT_NONVOID(InstancePtr->IsReady == XCOMPONENT_IS_READY);
-
-	/* get the contents of the software control register, if scatter gather is not
-	 * enabled (started), then return a status because the disable acknowledge
-	 * would not be generated
-	 */
-	Register = XIo_In32(InstancePtr->RegBaseAddress + XDC_SWCR_REG_OFFSET);
-
-	if ((Register & XDC_SWCR_SG_ENABLE_MASK) == 0) {
-		return XST_DMA_SG_IS_STOPPED;
-	}
-
-	/* Ensure the interrupt status for the scatter gather is cleared such
-	 * that this function will wait til the disable has occurred, writing
-	 * a 1 to only that bit in the register will clear only it
-	 */
-	XIo_Out32(InstancePtr->RegBaseAddress + XDC_IS_REG_OFFSET,
-		  XDC_IXR_SG_DISABLE_ACK_MASK);
-
-	/* disable scatter gather by writing to the software control register
-	 * without modifying any other bits of the register
-	 */
-	XIo_Out32(InstancePtr->RegBaseAddress + XDC_SWCR_REG_OFFSET,
-		  Register & ~XDC_SWCR_SG_ENABLE_MASK);
-
-	/* scatter gather does not disable immediately, but after the current
-	 * buffer descriptor is complete, so wait for the DMA channel to indicate
-	 * the disable is complete
-	 */
-	do {
-		Register =
-		    XIo_In32(InstancePtr->RegBaseAddress + XDC_IS_REG_OFFSET);
-	} while ((Register & XDC_IXR_SG_DISABLE_ACK_MASK) == 0);
-
-	/* Ensure the interrupt status for the scatter gather disable is cleared,
-	 * writing a 1 to only that bit in the register will clear only it
-	 */
-	XIo_Out32(InstancePtr->RegBaseAddress + XDC_IS_REG_OFFSET,
-		  XDC_IXR_SG_DISABLE_ACK_MASK);
-
-	/* set the specified buffer descriptor pointer to point to the buffer
-	 * descriptor that the scatter gather DMA channel was processing
-	 */
-	*BufDescriptorPtr =
-	    (XBufDescriptor *) XIo_In32(InstancePtr->RegBaseAddress +
-					XDC_BDA_REG_OFFSET);
-
-	return XST_SUCCESS;
-}
-
-/******************************************************************************
-*
-* FUNCTION:
-*
-* XDmaChannel_CreateSgList
-*
-* DESCRIPTION:
-*
-* This function creates a scatter gather list in the DMA channel.  A scatter
-* gather list consists of a list of buffer descriptors that are available to
-* be used for scatter gather operations.  Buffer descriptors are put into the
-* list to request a scatter gather operation to be performed.
-*
-* A number of buffer descriptors are created from the specified memory and put
-* into a buffer descriptor list as empty buffer descriptors. This function must
-* be called before non-empty buffer descriptors may be put into the DMA channel
-* to request scatter gather operations.
-*
-* ARGUMENTS:
-*
-* InstancePtr contains a pointer to the DMA channel to operate on.  The DMA
-* channel should be configured to use scatter gather in order for this function
-* to be called.
-*
-* MemoryPtr contains a pointer to the memory which is to be used for buffer
-* descriptors and must not be cached.
-*
-* ByteCount contains the number of bytes for the specified memory to be used
-* for buffer descriptors.
-*
-* RETURN VALUE:
-*
-* A status contains XST_SUCCESS if the scatter gather list was successfully
-* created.
-*
-* A value of XST_DMA_SG_LIST_EXISTS indicates that the scatter gather list
-* was not created because the list has already been created.
-*
-* NOTES:
-*
-* None.
-*
-******************************************************************************/
-XStatus
-XDmaChannel_CreateSgList(XDmaChannel * InstancePtr,
-			 u32 * MemoryPtr, u32 ByteCount)
-{
-	XBufDescriptor *BufferDescriptorPtr = (XBufDescriptor *) MemoryPtr;
-	XBufDescriptor *PreviousDescriptorPtr = NULL;
-	XBufDescriptor *StartOfListPtr = BufferDescriptorPtr;
-	u32 UsedByteCount;
-
-	/* assert to verify valid input arguments, alignment for those
-	 * arguments that have alignment restrictions, and at least enough
-	 * memory for one buffer descriptor
-	 */
-	XASSERT_NONVOID(InstancePtr != NULL);
-	XASSERT_NONVOID(MemoryPtr != NULL);
-	XASSERT_NONVOID(((u32) MemoryPtr & 3) == 0);
-	XASSERT_NONVOID(ByteCount != 0);
-	XASSERT_NONVOID(ByteCount >= sizeof (XBufDescriptor));
-	XASSERT_NONVOID(InstancePtr->IsReady == XCOMPONENT_IS_READY);
-
-	/* if the scatter gather list has already been created, then return
-	 * with a status
-	 */
-	if (InstancePtr->TotalDescriptorCount != 0) {
-		return XST_DMA_SG_LIST_EXISTS;
-	}
-
-	/* loop thru the specified memory block and create as many buffer
-	 * descriptors as possible putting each into the list which is
-	 * implemented as a ring buffer, make sure not to use any memory which
-	 * is not large enough for a complete buffer descriptor
-	 */
-	UsedByteCount = 0;
-	while ((UsedByteCount + sizeof (XBufDescriptor)) <= ByteCount) {
-		/* setup a pointer to the next buffer descriptor in the memory and
-		 * update # of used bytes to know when all of memory is used
-		 */
-		BufferDescriptorPtr = (XBufDescriptor *) ((u32) MemoryPtr +
-							  UsedByteCount);
-
-		/* initialize the new buffer descriptor such that it doesn't contain
-		 * garbage which could be used by the DMA hardware
-		 */
-		XBufDescriptor_Initialize(BufferDescriptorPtr);
-
-		/* if this is not the first buffer descriptor to be created,
-		 * then link it to the last created buffer descriptor
-		 */
-		if (PreviousDescriptorPtr != NULL) {
-			XBufDescriptor_SetNextPtr(PreviousDescriptorPtr,
-						  BufferDescriptorPtr);
-		}
-
-		/* always keep a pointer to the last created buffer descriptor such
-		 * that they can be linked together in the ring buffer
-		 */
-		PreviousDescriptorPtr = BufferDescriptorPtr;
-
-		/* keep a count of the number of descriptors in the list to allow
-		 * error processing to be performed
-		 */
-		InstancePtr->TotalDescriptorCount++;
-
-		UsedByteCount += sizeof (XBufDescriptor);
-	}
-
-	/* connect the last buffer descriptor created and inserted in the list
-	 * to the first such that a ring buffer is created
-	 */
-	XBufDescriptor_SetNextPtr(BufferDescriptorPtr, StartOfListPtr);
-
-	/* initialize the ring buffer to indicate that there are no
-	 * buffer descriptors in the list which point to valid data buffers
-	 */
-	InstancePtr->PutPtr = BufferDescriptorPtr;
-	InstancePtr->GetPtr = BufferDescriptorPtr;
-	InstancePtr->CommitPtr = NULL;
-	InstancePtr->LastPtr = BufferDescriptorPtr;
-	InstancePtr->ActiveDescriptorCount = 0;
-
-	/* indicate the scatter gather list was successfully created */
-
-	return XST_SUCCESS;
-}
-
-/******************************************************************************
-*
-* FUNCTION:
-*
-* XDmaChannel_IsSgListEmpty
-*
-* DESCRIPTION:
-*
-* This function determines if the scatter gather list of a DMA channel is
-* empty with regard to buffer descriptors which are pointing to buffers to be
-* used for scatter gather operations.
-*
-* ARGUMENTS:
-*
-* InstancePtr contains a pointer to the DMA channel to operate on.  The DMA
-* channel should be configured to use scatter gather in order for this function
-* to be called.
-*
-* RETURN VALUE:
-*
-* A value of TRUE if the scatter gather list is empty, otherwise a value of
-* FALSE.
-*
-* NOTES:
-*
-* None.
-*
-******************************************************************************/
-u32
-XDmaChannel_IsSgListEmpty(XDmaChannel * InstancePtr)
-{
-	/* assert to verify valid input arguments */
-
-	XASSERT_NONVOID(InstancePtr != NULL);
-	XASSERT_NONVOID(InstancePtr->IsReady == XCOMPONENT_IS_READY);
-
-	/* if the number of descriptors which are being used in the list is zero
-	 * then the list is empty
-	 */
-	return (InstancePtr->ActiveDescriptorCount == 0);
-}
-
-/******************************************************************************
-*
-* FUNCTION:
-*
-* XDmaChannel_PutDescriptor
-*
-* DESCRIPTION:
-*
-* This function puts a buffer descriptor into the DMA channel scatter
-* gather list. A DMA channel maintains a list of buffer descriptors which are
-* to be processed.  This function puts the specified buffer descriptor
-* at the next location in the list.  Note that since the list is already intact,
-* the information in the parameter is copied into the list (rather than modify
-* list pointers on the fly).
-*
-* After buffer descriptors are put into the list, they must also be committed
-* by calling another function.	This allows multiple buffer descriptors which
-* span a single packet to be put into the list while preventing the hardware
-* from starting the first buffer descriptor of the packet.
-*
-* ARGUMENTS:
-*
-* InstancePtr contains a pointer to the DMA channel to operate on.  The DMA
-* channel should be configured to use scatter gather in order for this function
-* to be called.
-*
-* BufferDescriptorPtr is a pointer to the buffer descriptor to be put into
-* the next available location of the scatter gather list.
-*
-* RETURN VALUE:
-*
-* A status which indicates XST_SUCCESS if the buffer descriptor was
-* successfully put into the scatter gather list.
-*
-* A value of XST_DMA_SG_NO_LIST indicates the scatter gather list has not
-* been created.
-*
-* A value of XST_DMA_SG_LIST_FULL indicates the buffer descriptor was not
-* put into the list because the list was full.
-*
-* A value of XST_DMA_SG_BD_LOCKED indicates the buffer descriptor was not
-* put into the list because the buffer descriptor in the list which is to
-* be overwritten was locked.  A locked buffer descriptor indicates the higher
-* layered software is still using the buffer descriptor.
-*
-* NOTES:
-*
-* It is necessary to create a scatter gather list for a DMA channel before
-* putting buffer descriptors into it.
-*
-******************************************************************************/
-XStatus
-XDmaChannel_PutDescriptor(XDmaChannel * InstancePtr,
-			  XBufDescriptor * BufferDescriptorPtr)
-{
-	u32 Control;
-
-	/* assert to verify valid input arguments and alignment for those
-	 * arguments that have alignment restrictions
-	 */
-	XASSERT_NONVOID(InstancePtr != NULL);
-	XASSERT_NONVOID(BufferDescriptorPtr != NULL);
-	XASSERT_NONVOID(((u32) BufferDescriptorPtr & 3) == 0);
-	XASSERT_NONVOID(InstancePtr->IsReady == XCOMPONENT_IS_READY);
-
-	/* if a scatter gather list has not been created yet, return a status */
-
-	if (InstancePtr->TotalDescriptorCount == 0) {
-		return XST_DMA_SG_NO_LIST;
-	}
-
-	/* if the list is full because all descriptors are pointing to valid
-	 * buffers, then indicate an error, this code assumes no list or an
-	 * empty list is detected above
-	 */
-	if (InstancePtr->ActiveDescriptorCount ==
-	    InstancePtr->TotalDescriptorCount) {
-		return XST_DMA_SG_LIST_FULL;
-	}
-
-	/* if the buffer descriptor in the list which is to be overwritten is
-	 * locked, then don't overwrite it and return a status
-	 */
-	if (XBufDescriptor_IsLocked(InstancePtr->PutPtr)) {
-		return XST_DMA_SG_BD_LOCKED;
-	}
-
-	/* set the scatter gather stop bit in the control word of the descriptor
-	 * to cause the h/w to stop after it processes this descriptor since it
-	 * will be the last in the list
-	 */
-	Control = XBufDescriptor_GetControl(BufferDescriptorPtr);
-	XBufDescriptor_SetControl(BufferDescriptorPtr,
-				  Control | XDC_DMACR_SG_DISABLE_MASK);
-
-	/* set both statuses in the descriptor so we tell if they are updated with
-	 * the status of the transfer, the hardware should change the busy in the
-	 * DMA status to be false when it completes
-	 */
-	XBufDescriptor_SetStatus(BufferDescriptorPtr, XDC_DMASR_BUSY_MASK);
-	XBufDescriptor_SetDeviceStatus(BufferDescriptorPtr, 0);
-
-	/* copy the descriptor into the next position in the list so it's ready to
-	 * be used by the h/w, this assumes the descriptor in the list prior to this
-	 * one still has the stop bit in the control word set such that the h/w
-	 * use this one yet
-	 */
-	CopyBufferDescriptor(BufferDescriptorPtr, InstancePtr->PutPtr);
-
-	/* only the last in the list and the one to be committed have scatter gather
-	 * disabled in the control word, a commit requires only one descriptor
-	 * to be changed, when # of descriptors to commit > 2 all others except the
-	 * 1st and last have scatter gather enabled
-	 */
-	if ((InstancePtr->CommitPtr != InstancePtr->LastPtr) &&
-	    (InstancePtr->CommitPtr != NULL)) {
-		Control = XBufDescriptor_GetControl(InstancePtr->LastPtr);
-		XBufDescriptor_SetControl(InstancePtr->LastPtr,
-					  Control & ~XDC_DMACR_SG_DISABLE_MASK);
-	}
-
-	/* update the list data based upon putting a descriptor into the list,
-	 * these operations must be last
-	 */
-	InstancePtr->ActiveDescriptorCount++;
-
-	/* only update the commit pointer if it is not already active, this allows
-	 * it to be deactivated after every commit such that a single descriptor
-	 * which is committed does not appear to be waiting to be committed
-	 */
-	if (InstancePtr->CommitPtr == NULL) {
-		InstancePtr->CommitPtr = InstancePtr->LastPtr;
-	}
-
-	/* these updates MUST BE LAST after the commit pointer update in order for
-	 * the commit pointer to track the correct descriptor to be committed
-	 */
-	InstancePtr->LastPtr = InstancePtr->PutPtr;
-	InstancePtr->PutPtr = XBufDescriptor_GetNextPtr(InstancePtr->PutPtr);
-
-	return XST_SUCCESS;
-}
-
-/******************************************************************************
-*
-* FUNCTION:
-*
-* XDmaChannel_CommitPuts
-*
-* DESCRIPTION:
-*
-* This function commits the buffer descriptors which have been put into the
-* scatter list for the DMA channel since the last commit operation was
-* performed.  This enables the calling functions to put several buffer
-* descriptors into the list (e.g.,a packet's worth) before allowing the scatter
-* gather operations to start.  This prevents the DMA channel hardware from
-* starting to use the buffer descriptors in the list before they are ready
-* to be used (multiple buffer descriptors for a single packet).
-*
-* ARGUMENTS:
-*
-* InstancePtr contains a pointer to the DMA channel to operate on.  The DMA
-* channel should be configured to use scatter gather in order for this function
-* to be called.
-*
-* RETURN VALUE:
-*
-* A status indicating XST_SUCCESS if the buffer descriptors of the list were
-* successfully committed.
-*
-* A value of XST_DMA_SG_NOTHING_TO_COMMIT indicates that the buffer descriptors
-* were not committed because there was nothing to commit in the list.  All the
-* buffer descriptors which are in the list are commited.
-*
-* NOTES:
-*
-* None.
-*
-******************************************************************************/
-XStatus
-XDmaChannel_CommitPuts(XDmaChannel * InstancePtr)
-{
-	/* assert to verify input arguments */
-
-	XASSERT_NONVOID(InstancePtr != NULL);
-	XASSERT_NONVOID(InstancePtr->IsReady == XCOMPONENT_IS_READY);
-
-	/* if the buffer descriptor to be committed is already committed or
-	 * the list is empty (none have been put in), then indicate an error
-	 */
-	if ((InstancePtr->CommitPtr == NULL) ||
-	    XDmaChannel_IsSgListEmpty(InstancePtr)) {
-		return XST_DMA_SG_NOTHING_TO_COMMIT;
-	}
-
-	/* last descriptor in the list must have scatter gather disabled so the end
-	 * of the list is hit by h/w, if descriptor to commit is not last in list,
-	 * commit descriptors by enabling scatter gather in the descriptor
-	 */
-	if (InstancePtr->CommitPtr != InstancePtr->LastPtr) {
-		u32 Control;
-
-		Control = XBufDescriptor_GetControl(InstancePtr->CommitPtr);
-		XBufDescriptor_SetControl(InstancePtr->CommitPtr, Control &
-					  ~XDC_DMACR_SG_DISABLE_MASK);
-	}
-	/* Update the commit pointer to indicate that there is nothing to be
-	 * committed, this state is used by start processing to know that the
-	 * buffer descriptor to start is not waiting to be committed
-	 */
-	InstancePtr->CommitPtr = NULL;
-
-	return XST_SUCCESS;
-}
-
-/******************************************************************************
-*
-* FUNCTION:
-*
-* XDmaChannel_GetDescriptor
-*
-* DESCRIPTION:
-*
-* This function gets a buffer descriptor from the scatter gather list of the
-* DMA channel. The buffer descriptor is retrieved from the scatter gather list
-* and the scatter gather list is updated to not include the retrieved buffer
-* descriptor.  This is typically done after a scatter gather operation
-* completes indicating that a data buffer has been successfully sent or data
-* has been received into the data buffer. The purpose of this function is to
-* allow the device using the scatter gather operation to get the results of the
-* operation.
-*
-* ARGUMENTS:
-*
-* InstancePtr contains a pointer to the DMA channel to operate on.  The DMA
-* channel should be configured to use scatter gather in order for this function
-* to be called.
-*
-* BufDescriptorPtr is a pointer to a pointer to the buffer descriptor which
-* was retrieved from the list.	The buffer descriptor is not really removed
-* from the list, but it is changed to a state such that the hardware will not
-* use it again until it is put into the scatter gather list of the DMA channel.
-*
-* RETURN VALUE:
-*
-* A status indicating XST_SUCCESS if a buffer descriptor was retrieved from
-* the scatter gather list of the DMA channel.
-*
-* A value of XST_DMA_SG_NO_LIST indicates the scatter gather list has not
-* been created.
-*
-* A value of XST_DMA_SG_LIST_EMPTY indicates no buffer descriptor was
-* retrieved from the list because there are no buffer descriptors to be
-* processed in the list.
-*
-* BufDescriptorPtr is updated to point to the buffer descriptor which was
-* retrieved from the list if the status indicates success.
-*
-* NOTES:
-*
-* None.
-*
-******************************************************************************/
-XStatus
-XDmaChannel_GetDescriptor(XDmaChannel * InstancePtr,
-			  XBufDescriptor ** BufDescriptorPtr)
-{
-	u32 Control;
-
-	/* assert to verify input arguments */
-
-	XASSERT_NONVOID(InstancePtr != NULL);
-	XASSERT_NONVOID(BufDescriptorPtr != NULL);
-	XASSERT_NONVOID(InstancePtr->IsReady == XCOMPONENT_IS_READY);
-
-	/* if a scatter gather list has not been created yet, return a status */
-
-	if (InstancePtr->TotalDescriptorCount == 0) {
-		return XST_DMA_SG_NO_LIST;
-	}
-
-	/* if the buffer descriptor list is empty, then indicate an error */
-
-	if (XDmaChannel_IsSgListEmpty(InstancePtr)) {
-		return XST_DMA_SG_LIST_EMPTY;
-	}
-
-	/* retrieve the next buffer descriptor which is ready to be processed from
-	 * the buffer descriptor list for the DMA channel, set the control word
-	 * such that hardware will stop after the descriptor has been processed
-	 */
-	Control = XBufDescriptor_GetControl(InstancePtr->GetPtr);
-	XBufDescriptor_SetControl(InstancePtr->GetPtr,
-				  Control | XDC_DMACR_SG_DISABLE_MASK);
-
-	/* set the input argument, which is also an output, to point to the
-	 * buffer descriptor which is to be retrieved from the list
-	 */
-	*BufDescriptorPtr = InstancePtr->GetPtr;
-
-	/* update the pointer of the DMA channel to reflect the buffer descriptor
-	 * was retrieved from the list by setting it to the next buffer descriptor
-	 * in the list and indicate one less descriptor in the list now
-	 */
-	InstancePtr->GetPtr = XBufDescriptor_GetNextPtr(InstancePtr->GetPtr);
-	InstancePtr->ActiveDescriptorCount--;
-
-	return XST_SUCCESS;
-}
-
-/*********************** Interrupt Collescing Functions **********************/
-
-/******************************************************************************
-*
-* FUNCTION:
-*
-* XDmaChannel_GetPktCount
-*
-* DESCRIPTION:
-*
-* This function returns the value of the unserviced packet count register of
-* the DMA channel.  This count represents the number of packets that have been
-* sent or received by the hardware, but not processed by software.
-*
-* ARGUMENTS:
-*
-* InstancePtr contains a pointer to the DMA channel to operate on.  The DMA
-* channel should be configured to use scatter gather in order for this function
-* to be called.
-*
-* RETURN VALUE:
-*
-* The unserviced packet counter register contents for the DMA channel.
-*
-* NOTES:
-*
-* None.
-*
-******************************************************************************/
-u32
-XDmaChannel_GetPktCount(XDmaChannel * InstancePtr)
-{
-	/* assert to verify input arguments */
-
-	XASSERT_NONVOID(InstancePtr != NULL);
-	XASSERT_NONVOID(InstancePtr->IsReady == XCOMPONENT_IS_READY);
-
-	/* get the unserviced packet count from the register and return it */
-
-	return XIo_In32(InstancePtr->RegBaseAddress + XDC_UPC_REG_OFFSET);
-}
-
-/******************************************************************************
-*
-* FUNCTION:
-*
-* XDmaChannel_DecrementPktCount
-*
-* DESCRIPTION:
-*
-* This function decrements the value of the unserviced packet count register.
-* This informs the hardware that the software has processed a packet.  The
-* unserviced packet count register may only be decremented by one in the
-* hardware.
-*
-* ARGUMENTS:
-*
-* InstancePtr contains a pointer to the DMA channel to operate on.  The DMA
-* channel should be configured to use scatter gather in order for this function
-* to be called.
-*
-* RETURN VALUE:
-*
-* None.
-*
-* NOTES:
-*
-* None.
-*
-******************************************************************************/
-void
-XDmaChannel_DecrementPktCount(XDmaChannel * InstancePtr)
-{
-	u32 Register;
-
-	/* assert to verify input arguments */
-
-	XASSERT_VOID(InstancePtr != NULL);
-	XASSERT_VOID(InstancePtr->IsReady == XCOMPONENT_IS_READY);
-
-	/* if the unserviced packet count register can be decremented (rather
-	 * than rolling over) decrement it by writing a 1 to the register,
-	 * this is the only valid write to the register as it serves as an
-	 * acknowledge that a packet was handled by the software
-	 */
-	Register = XIo_In32(InstancePtr->RegBaseAddress + XDC_UPC_REG_OFFSET);
-	if (Register > 0) {
-		XIo_Out32(InstancePtr->RegBaseAddress + XDC_UPC_REG_OFFSET,
-			  1UL);
-	}
-}
-
-/******************************************************************************
-*
-* FUNCTION:
-*
-* XDmaChannel_SetPktThreshold
-*
-* DESCRIPTION:
-*
-* This function sets the value of the packet count threshold register of the
-* DMA channel.	It reflects the number of packets that must be sent or
-* received before generating an interrupt.  This value helps implement
-* a concept called "interrupt coalescing", which is used to reduce the number
-* of interrupts from devices with high data rates.
-*
-* ARGUMENTS:
-*
-* InstancePtr contains a pointer to the DMA channel to operate on.  The DMA
-* channel should be configured to use scatter gather in order for this function
-* to be called.
-*
-* Threshold is the value that is written to the threshold register of the
-* DMA channel.
-*
-* RETURN VALUE:
-*
-* A status containing XST_SUCCESS if the packet count threshold was
-* successfully set.
-*
-* NOTES:
-*
-* The packet threshold could be set to larger than the number of descriptors
-* allocated to the DMA channel. In this case, the wait bound will take over
-* and always indicate data arrival. There was a check in this function that
-* returned an error if the treshold was larger than the number of descriptors,
-* but that was removed because users would then have to set the threshold
-* only after they set descriptor space, which is an order dependency that
-* caused confustion.
-*
-******************************************************************************/
-XStatus
-XDmaChannel_SetPktThreshold(XDmaChannel * InstancePtr, u8 Threshold)
-{
-	/* assert to verify input arguments, don't assert the threshold since
-	 * it's range is unknown
-	 */
-	XASSERT_NONVOID(InstancePtr != NULL);
-	XASSERT_NONVOID(InstancePtr->IsReady == XCOMPONENT_IS_READY);
-
-	/* set the packet count threshold in the register such that an interrupt
-	 * may be generated, if enabled, when the packet count threshold is
-	 * reached or exceeded
-	 */
-	XIo_Out32(InstancePtr->RegBaseAddress + XDC_PCT_REG_OFFSET,
-		  (u32) Threshold);
-
-	/* indicate the packet count threshold was successfully set */
-
-	return XST_SUCCESS;
-}
-
-/******************************************************************************
-*
-* FUNCTION:
-*
-* XDmaChannel_GetPktThreshold
-*
-* DESCRIPTION:
-*
-* This function gets the value of the packet count threshold register of the
-* DMA channel.	This value reflects the number of packets that must be sent or
-* received before generating an interrupt.  This value helps implement a concept
-* called "interrupt coalescing", which is used to reduce the number of
-* interrupts from devices with high data rates.
-*
-* ARGUMENTS:
-*
-* InstancePtr contains a pointer to the DMA channel to operate on.  The DMA
-* channel should be configured to use scatter gather in order for this function
-* to be called.
-*
-* RETURN VALUE:
-*
-* The packet threshold register contents for the DMA channel and is a value in
-* the range 0 - 1023.  A value of 0 indicates the packet wait bound timer is
-* disabled.
-*
-* NOTES:
-*
-* None.
-*
-******************************************************************************/
-u8
-XDmaChannel_GetPktThreshold(XDmaChannel * InstancePtr)
-{
-	/* assert to verify input arguments */
-
-	XASSERT_NONVOID(InstancePtr != NULL);
-	XASSERT_NONVOID(InstancePtr->IsReady == XCOMPONENT_IS_READY);
-
-	/* get the packet count threshold from the register and return it,
-	 * since only 8 bits are used, cast it to return only those bits */
-
-	return (u8) XIo_In32(InstancePtr->RegBaseAddress + XDC_PCT_REG_OFFSET);
-}
-
-/******************************************************************************
-*
-* FUNCTION:
-*
-* XDmaChannel_SetPktWaitBound
-*
-* DESCRIPTION:
-*
-* This function sets the value of the packet wait bound register of the
-* DMA channel.	This value reflects the timer value used to trigger an
-* interrupt when not enough packets have been received to reach the packet
-* count threshold.
-*
-* The timer is in millisecond units with +/- 33% accuracy.
-*
-* ARGUMENTS:
-*
-* InstancePtr contains a pointer to the DMA channel to operate on.  The DMA
-* channel should be configured to use scatter gather in order for this function
-* to be called.
-*
-* WaitBound is the value, in milliseconds, to be stored in the wait bound
-* register of the DMA channel and is a value in the range 0  - 1023.  A value
-* of 0 disables the packet wait bound timer.
-*
-* RETURN VALUE:
-*
-* None.
-*
-* NOTES:
-*
-* None.
-*
-******************************************************************************/
-void
-XDmaChannel_SetPktWaitBound(XDmaChannel * InstancePtr, u32 WaitBound)
-{
-	/* assert to verify input arguments */
-
-	XASSERT_VOID(InstancePtr != NULL);
-	XASSERT_VOID(WaitBound < 1024);
-	XASSERT_VOID(InstancePtr->IsReady == XCOMPONENT_IS_READY);
-
-	/* set the packet wait bound in the register such that interrupt may be
-	 * generated, if enabled, when packets have not been handled for a specific
-	 * amount of time
-	 */
-	XIo_Out32(InstancePtr->RegBaseAddress + XDC_PWB_REG_OFFSET, WaitBound);
-}
-
-/******************************************************************************
-*
-* FUNCTION:
-*
-* XDmaChannel_GetPktWaitBound
-*
-* DESCRIPTION:
-*
-* This function gets the value of the packet wait bound register of the
-* DMA channel.	This value contains the timer value used to trigger an
-* interrupt when not enough packets have been received to reach the packet
-* count threshold.
-*
-* The timer is in millisecond units with +/- 33% accuracy.
-*
-* ARGUMENTS:
-*
-* InstancePtr contains a pointer to the DMA channel to operate on.  The DMA
-* channel should be configured to use scatter gather in order for this function
-* to be called.
-*
-* RETURN VALUE:
-*
-* The packet wait bound register contents for the DMA channel.
-*
-* NOTES:
-*
-* None.
-*
-******************************************************************************/
-u32
-XDmaChannel_GetPktWaitBound(XDmaChannel * InstancePtr)
-{
-	/* assert to verify input arguments */
-
-	XASSERT_NONVOID(InstancePtr != NULL);
-	XASSERT_NONVOID(InstancePtr->IsReady == XCOMPONENT_IS_READY);
-
-	/* get the packet wait bound from the register and return it */
-
-	return XIo_In32(InstancePtr->RegBaseAddress + XDC_PWB_REG_OFFSET);
-}
diff --git a/board/xilinx/common/xio.h b/board/xilinx/common/xio.h
deleted file mode 100644
index 5bb09c8..0000000
--- a/board/xilinx/common/xio.h
+++ /dev/null
@@ -1,81 +0,0 @@
-/*
- * xio.h
- *
- * Defines XIo functions for Xilinx OCP in terms of Linux primitives
- *
- * Author: MontaVista Software, Inc.
- *         source@mvista.com
- *
- * Copyright 2002 MontaVista Software Inc.
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License as published by the
- *  Free Software Foundation; either version 2 of the License, or (at your
- *  option) any later version.
- *
- *  THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- *  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
- *  IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
- *  BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
- *  OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- *  ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
- *  TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
- *  USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the GNU General Public License along
- *  with this program; if not, write to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef XIO_H
-#define XIO_H
-
-#include "xbasic_types.h"
-#include <asm/io.h>
-
-typedef u32 XIo_Address;
-
-extern inline u8
-XIo_In8(XIo_Address InAddress)
-{
-	return (u8) in_8((volatile unsigned char *) InAddress);
-}
-extern inline u16
-XIo_In16(XIo_Address InAddress)
-{
-	return (u16) in_be16((volatile unsigned short *) InAddress);
-}
-extern inline u32
-XIo_In32(XIo_Address InAddress)
-{
-	return (u32) in_be32((volatile unsigned *) InAddress);
-}
-extern inline void
-XIo_Out8(XIo_Address OutAddress, u8 Value)
-{
-	out_8((volatile unsigned char *) OutAddress, Value);
-}
-extern inline void
-XIo_Out16(XIo_Address OutAddress, u16 Value)
-{
-	out_be16((volatile unsigned short *) OutAddress, Value);
-}
-extern inline void
-XIo_Out32(XIo_Address OutAddress, u32 Value)
-{
-	out_be32((volatile unsigned *) OutAddress, Value);
-}
-
-#define XIo_ToLittleEndian16(s,d) (*(u16*)(d) = cpu_to_le16((u16)(s)))
-#define XIo_ToLittleEndian32(s,d) (*(u32*)(d) = cpu_to_le32((u32)(s)))
-#define XIo_ToBigEndian16(s,d) (*(u16*)(d) = cpu_to_be16((u16)(s)))
-#define XIo_ToBigEndian32(s,d) (*(u32*)(d) = cpu_to_be32((u32)(s)))
-
-#define XIo_FromLittleEndian16(s,d) (*(u16*)(d) = le16_to_cpu((u16)(s)))
-#define XIo_FromLittleEndian32(s,d) (*(u32*)(d) = le32_to_cpu((u32)(s)))
-#define XIo_FromBigEndian16(s,d) (*(u16*)(d) = be16_to_cpu((u16)(s)))
-#define XIo_FromBigEndian32(s,d) (*(u32*)(d) = be32_to_cpu((u32)(s)))
-
-#endif				/* XIO_H */
diff --git a/board/xilinx/common/xipif_v1_23_b.c b/board/xilinx/common/xipif_v1_23_b.c
deleted file mode 100644
index c7311ab..0000000
--- a/board/xilinx/common/xipif_v1_23_b.c
+++ /dev/null
@@ -1,331 +0,0 @@
-/* $Id: xipif_v1_23_b.c,v 1.1 2002/03/18 23:24:52 linnj Exp $ */
-/******************************************************************************
-*
-*       XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS"
-*       AS A COURTESY TO YOU, SOLELY FOR USE IN DEVELOPING PROGRAMS AND
-*       SOLUTIONS FOR XILINX DEVICES.  BY PROVIDING THIS DESIGN, CODE,
-*       OR INFORMATION AS ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE,
-*       APPLICATION OR STANDARD, XILINX IS MAKING NO REPRESENTATION
-*       THAT THIS IMPLEMENTATION IS FREE FROM ANY CLAIMS OF INFRINGEMENT,
-*       AND YOU ARE RESPONSIBLE FOR OBTAINING ANY RIGHTS YOU MAY REQUIRE
-*       FOR YOUR IMPLEMENTATION.  XILINX EXPRESSLY DISCLAIMS ANY
-*       WARRANTY WHATSOEVER WITH RESPECT TO THE ADEQUACY OF THE
-*       IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY WARRANTIES OR
-*       REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM CLAIMS OF
-*       INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
-*       FOR A PARTICULAR PURPOSE.
-*
-*       (c) Copyright 2002 Xilinx Inc.
-*       All rights reserved.
-*
-******************************************************************************/
-/******************************************************************************
-*
-* FILENAME:
-*
-* xipif.c
-*
-* DESCRIPTION:
-*
-* This file contains the implementation of the XIpIf component. The
-* XIpIf component encapsulates the IPIF, which is the standard interface
-* that IP must adhere to when connecting to a bus.  The purpose of this
-* component is to encapsulate the IPIF processing such that maintainability
-* is increased.  This component does not provide a lot of abstraction from
-* from the details of the IPIF as it is considered a building block for
-* device drivers.  A device driver designer must be familiar with the
-* details of the IPIF hardware to use this component.
-*
-* The IPIF hardware provides a building block for all hardware devices such
-* that each device does not need to reimplement these building blocks. The
-* IPIF contains other building blocks, such as FIFOs and DMA channels, which
-* are also common to many devices.  These blocks are implemented as separate
-* hardware blocks and instantiated within the IPIF.  The primary hardware of
-* the IPIF which is implemented by this software component is the interrupt
-* architecture.  Since there are many blocks of a device which may generate
-* interrupts, all the interrupt processing is contained in the common part
-* of the device, the IPIF.  This interrupt processing is for the device level
-* only and does not include any processing for the interrupt controller.
-*
-* A device is a mechanism such as an Ethernet MAC.  The device is made
-* up of several parts which include an IPIF and the IP.  The IPIF contains most
-* of the device infrastructure which is common to all devices, such as
-* interrupt processing, DMA channels, and FIFOs.  The infrastructure may also
-* be referred to as IPIF internal blocks since they are part of the IPIF and
-* are separate blocks that can be selected based upon the needs of the device.
-* The IP of the device is the logic that is unique to the device and interfaces
-* to the IPIF of the device.
-*
-* In general, there are two levels of registers within the IPIF.  The first
-* level, referred to as the device level, contains registers which are for the
-* entire device.  The second level, referred to as the IP level, contains
-* registers which are specific to the IP of the device.  The two levels of
-* registers are designed to be hierarchical such that the device level is
-* is a more general register set above the more specific registers of the IP.
-* The IP level of registers provides functionality which is typically common
-* across all devices and allows IP designers to focus on the unique aspects
-* of the IP.
-*
-* The interrupt registers of the IPIF are parameterizable such that the only
-* the number of bits necessary for the device are implemented. The functions
-* of this component do not attempt to validate that the passed in arguments are
-* valid based upon the number of implemented bits.  This is necessary to
-* maintain the level of performance required for the common components.  Bits
-* of the registers are assigned starting at the least significant bit of the
-* registers.
-*
-* Critical Sections
-*
-* It is the responsibility of the device driver designer to use critical
-* sections as necessary when calling functions of the IPIF.  This component
-* does not use critical sections and it does access registers using
-* read-modify-write operations.  Calls to IPIF functions from a main thread
-* and from an interrupt context could produce unpredictable behavior such that
-* the caller must provide the appropriate critical sections.
-*
-* Mutual Exclusion
-*
-* The functions of the IPIF are not thread safe such that the caller of all
-* functions is responsible for ensuring mutual exclusion for an IPIF.  Mutual
-* exclusion across multiple IPIF components is not necessary.
-*
-* NOTES:
-*
-* None.
-*
-* MODIFICATION HISTORY:
-*
-* Ver   Who  Date     Changes
-* ----- ---- -------- -----------------------------------------------
-* 1.23b jhl  02/27/01 Repartioned to reduce size
-*
-******************************************************************************/
-
-/***************************** Include Files *********************************/
-
-#include "xipif_v1_23_b.h"
-#include "xio.h"
-
-/************************** Constant Definitions *****************************/
-
-/* the following constant is used to generate bit masks for register testing
- * in the self test functions, it defines the starting bit mask that is to be
- * shifted from the LSB to MSB in creating a register test mask
- */
-#define XIIF_V123B_FIRST_BIT_MASK     1UL
-
-/**************************** Type Definitions *******************************/
-
-/***************** Macros (Inline Functions) Definitions *********************/
-
-/************************** Variable Definitions *****************************/
-
-/************************** Function Prototypes ******************************/
-
-static XStatus IpIntrSelfTest(u32 RegBaseAddress, u32 IpRegistersWidth);
-
-/******************************************************************************
-*
-* FUNCTION:
-*
-* XIpIf_SelfTest
-*
-* DESCRIPTION:
-*
-* This function performs a self test on the specified IPIF component.  Many
-* of the registers in the IPIF are tested to ensure proper operation.  This
-* function is destructive because the IPIF is reset at the start of the test
-* and at the end of the test to ensure predictable results.  The IPIF reset
-* also resets the entire device that uses the IPIF.  This function exits with
-* all interrupts for the device disabled.
-*
-* ARGUMENTS:
-*
-* InstancePtr points to the XIpIf to operate on.
-*
-* DeviceRegistersWidth contains the number of bits in the device interrupt
-* registers. The hardware is parameterizable such that only the number of bits
-* necessary to support a device are implemented.  This value must be between 0
-* and 32 with 0 indicating there are no device interrupt registers used.
-*
-* IpRegistersWidth contains the number of bits in the IP interrupt registers
-* of the device.  The hardware is parameterizable such that only the number of
-* bits necessary to support a device are implemented.  This value must be
-* between 0 and 32 with 0 indicating there are no IP interrupt registers used.
-*
-* RETURN VALUE:
-*
-* A value of XST_SUCCESS indicates the test was successful with no errors.
-* Any one of the following error values may also be returned.
-*
-*   XST_IPIF_RESET_REGISTER_ERROR       The value of a register at reset was
-*                                       not valid
-*   XST_IPIF_IP_STATUS_ERROR            A write to the IP interrupt status
-*                                       register did not read back correctly
-*   XST_IPIF_IP_ACK_ERROR               One or more bits in the IP interrupt
-*                                       status register did not reset when acked
-*   XST_IPIF_IP_ENABLE_ERROR            The IP interrupt enable register
-*                                       did not read back correctly based upon
-*                                       what was written to it
-*
-* NOTES:
-*
-* None.
-*
-******************************************************************************/
-
-/* the following constant defines the maximum number of bits which may be
- * used in the registers at the device and IP levels, this is based upon the
- * number of bits available in the registers
- */
-#define XIIF_V123B_MAX_REG_BIT_COUNT 32
-
-XStatus
-XIpIfV123b_SelfTest(u32 RegBaseAddress, u8 IpRegistersWidth)
-{
-	XStatus Status;
-
-	/* assert to verify arguments are valid */
-
-	XASSERT_NONVOID(IpRegistersWidth <= XIIF_V123B_MAX_REG_BIT_COUNT);
-
-	/* reset the IPIF such that it's in a known state before the test
-	 * and interrupts are globally disabled
-	 */
-	XIIF_V123B_RESET(RegBaseAddress);
-
-	/* perform the self test on the IP interrupt registers, if
-	 * it is not successful exit with the status
-	 */
-	Status = IpIntrSelfTest(RegBaseAddress, IpRegistersWidth);
-	if (Status != XST_SUCCESS) {
-		return Status;
-	}
-
-	/* reset the IPIF such that it's in a known state before exiting test */
-
-	XIIF_V123B_RESET(RegBaseAddress);
-
-	/* reaching this point means there were no errors, return success */
-
-	return XST_SUCCESS;
-}
-
-/******************************************************************************
-*
-* FUNCTION:
-*
-* IpIntrSelfTest
-*
-* DESCRIPTION:
-*
-* Perform a self test on the IP interrupt registers of the IPIF. This
-* function modifies registers of the IPIF such that they are not guaranteed
-* to be in the same state when it returns.  Any bits in the IP interrupt
-* status register which are set are assumed to be set by default after a reset
-* and are not tested in the test.
-*
-* ARGUMENTS:
-*
-* InstancePtr points to the XIpIf to operate on.
-*
-* IpRegistersWidth contains the number of bits in the IP interrupt registers
-* of the device.  The hardware is parameterizable such that only the number of
-* bits necessary to support a device are implemented.  This value must be
-* between 0 and 32 with 0 indicating there are no IP interrupt registers used.
-*
-* RETURN VALUE:
-*
-* A status indicating XST_SUCCESS if the test was successful.  Otherwise, one
-* of the following values is returned.
-*
-*   XST_IPIF_RESET_REGISTER_ERROR       The value of a register at reset was
-*                                       not valid
-*   XST_IPIF_IP_STATUS_ERROR            A write to the IP interrupt status
-*                                       register did not read back correctly
-*   XST_IPIF_IP_ACK_ERROR               One or more bits in the IP status
-*                                       register did not reset when acked
-*   XST_IPIF_IP_ENABLE_ERROR            The IP interrupt enable register
-*                                       did not read back correctly based upon
-*                                       what was written to it
-* NOTES:
-*
-* None.
-*
-******************************************************************************/
-static XStatus
-IpIntrSelfTest(u32 RegBaseAddress, u32 IpRegistersWidth)
-{
-	/* ensure that the IP interrupt interrupt enable register is  zero
-	 * as it should be at reset, the interrupt status is dependent upon the
-	 * IP such that it's reset value is not known
-	 */
-	if (XIIF_V123B_READ_IIER(RegBaseAddress) != 0) {
-		return XST_IPIF_RESET_REGISTER_ERROR;
-	}
-
-	/* if there are any used IP interrupts, then test all of the interrupt
-	 * bits in all testable registers
-	 */
-	if (IpRegistersWidth > 0) {
-		u32 BitCount;
-		u32 IpInterruptMask = XIIF_V123B_FIRST_BIT_MASK;
-		u32 Mask = XIIF_V123B_FIRST_BIT_MASK;	/* bits assigned MSB to LSB */
-		u32 InterruptStatus;
-
-		/* generate the register masks to be used for IP register tests, the
-		 * number of bits supported by the hardware is parameterizable such
-		 * that only that number of bits are implemented in the registers, the
-		 * bits are allocated starting at the MSB of the registers
-		 */
-		for (BitCount = 1; BitCount < IpRegistersWidth; BitCount++) {
-			Mask = Mask << 1;
-			IpInterruptMask |= Mask;
-		}
-
-		/* get the current IP interrupt status register contents, any bits
-		 * already set must default to 1 at reset in the device and these
-		 * bits can't be tested in the following test, remove these bits from
-		 * the mask that was generated for the test
-		 */
-		InterruptStatus = XIIF_V123B_READ_IISR(RegBaseAddress);
-		IpInterruptMask &= ~InterruptStatus;
-
-		/* set the bits in the device status register and verify them by reading
-		 * the register again, all bits of the register are latched
-		 */
-		XIIF_V123B_WRITE_IISR(RegBaseAddress, IpInterruptMask);
-		InterruptStatus = XIIF_V123B_READ_IISR(RegBaseAddress);
-		if ((InterruptStatus & IpInterruptMask) != IpInterruptMask)
-		{
-			return XST_IPIF_IP_STATUS_ERROR;
-		}
-
-		/* test to ensure that the bits set in the IP interrupt status register
-		 * can be cleared by acknowledging them in the IP interrupt status
-		 * register then read it again and verify it was cleared
-		 */
-		XIIF_V123B_WRITE_IISR(RegBaseAddress, IpInterruptMask);
-		InterruptStatus = XIIF_V123B_READ_IISR(RegBaseAddress);
-		if ((InterruptStatus & IpInterruptMask) != 0) {
-			return XST_IPIF_IP_ACK_ERROR;
-		}
-
-		/* set the IP interrupt enable set register and then read the IP
-		 * interrupt enable register and verify the interrupts were enabled
-		 */
-		XIIF_V123B_WRITE_IIER(RegBaseAddress, IpInterruptMask);
-		if (XIIF_V123B_READ_IIER(RegBaseAddress) != IpInterruptMask) {
-			return XST_IPIF_IP_ENABLE_ERROR;
-		}
-
-		/* clear the IP interrupt enable register and then read the
-		 * IP interrupt enable register and verify the interrupts were disabled
-		 */
-		XIIF_V123B_WRITE_IIER(RegBaseAddress, 0);
-		if (XIIF_V123B_READ_IIER(RegBaseAddress) != 0) {
-			return XST_IPIF_IP_ENABLE_ERROR;
-		}
-	}
-	return XST_SUCCESS;
-}
diff --git a/board/xilinx/common/xipif_v1_23_b.h b/board/xilinx/common/xipif_v1_23_b.h
deleted file mode 100644
index 3ce1fff..0000000
--- a/board/xilinx/common/xipif_v1_23_b.h
+++ /dev/null
@@ -1,746 +0,0 @@
-/* $Id: xipif_v1_23_b.h,v 1.1 2002/03/18 23:24:52 linnj Exp $ */
-/******************************************************************************
-*
-*	XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS"
-*	AS A COURTESY TO YOU, SOLELY FOR USE IN DEVELOPING PROGRAMS AND
-*	SOLUTIONS FOR XILINX DEVICES.  BY PROVIDING THIS DESIGN, CODE,
-*	OR INFORMATION AS ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE,
-*	APPLICATION OR STANDARD, XILINX IS MAKING NO REPRESENTATION
-*	THAT THIS IMPLEMENTATION IS FREE FROM ANY CLAIMS OF INFRINGEMENT,
-*	AND YOU ARE RESPONSIBLE FOR OBTAINING ANY RIGHTS YOU MAY REQUIRE
-*	FOR YOUR IMPLEMENTATION.  XILINX EXPRESSLY DISCLAIMS ANY
-*	WARRANTY WHATSOEVER WITH RESPECT TO THE ADEQUACY OF THE
-*	IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY WARRANTIES OR
-*	REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM CLAIMS OF
-*	INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
-*	FOR A PARTICULAR PURPOSE.
-*
-*	(c) Copyright 2002 Xilinx Inc.
-*	All rights reserved.
-*
-******************************************************************************/
-/******************************************************************************
-*
-* FILENAME:
-*
-* xipif.h
-*
-* DESCRIPTION:
-*
-* The XIpIf component encapsulates the IPIF, which is the standard interface
-* that IP must adhere to when connecting to a bus.  The purpose of this
-* component is to encapsulate the IPIF processing such that maintainability
-* is increased.	 This component does not provide a lot of abstraction from
-* from the details of the IPIF as it is considered a building block for
-* device drivers.  A device driver designer must be familiar with the
-* details of the IPIF hardware to use this component.
-*
-* The IPIF hardware provides a building block for all hardware devices such
-* that each device does not need to reimplement these building blocks. The
-* IPIF contains other building blocks, such as FIFOs and DMA channels, which
-* are also common to many devices.  These blocks are implemented as separate
-* hardware blocks and instantiated within the IPIF.  The primary hardware of
-* the IPIF which is implemented by this software component is the interrupt
-* architecture.	 Since there are many blocks of a device which may generate
-* interrupts, all the interrupt processing is contained in the common part
-* of the device, the IPIF.  This interrupt processing is for the device level
-* only and does not include any processing for the interrupt controller.
-*
-* A device is a mechanism such as an Ethernet MAC.  The device is made
-* up of several parts which include an IPIF and the IP.	 The IPIF contains most
-* of the device infrastructure which is common to all devices, such as
-* interrupt processing, DMA channels, and FIFOs.  The infrastructure may also
-* be referred to as IPIF internal blocks since they are part of the IPIF and
-* are separate blocks that can be selected based upon the needs of the device.
-* The IP of the device is the logic that is unique to the device and interfaces
-* to the IPIF of the device.
-*
-* In general, there are two levels of registers within the IPIF.  The first
-* level, referred to as the device level, contains registers which are for the
-* entire device.  The second level, referred to as the IP level, contains
-* registers which are specific to the IP of the device.	 The two levels of
-* registers are designed to be hierarchical such that the device level is
-* is a more general register set above the more specific registers of the IP.
-* The IP level of registers provides functionality which is typically common
-* across all devices and allows IP designers to focus on the unique aspects
-* of the IP.
-*
-* Critical Sections
-*
-* It is the responsibility of the device driver designer to use critical
-* sections as necessary when calling functions of the IPIF.  This component
-* does not use critical sections and it does access registers using
-* read-modify-write operations.	 Calls to IPIF functions from a main thread
-* and from an interrupt context could produce unpredictable behavior such that
-* the caller must provide the appropriate critical sections.
-*
-* Mutual Exclusion
-*
-* The functions of the IPIF are not thread safe such that the caller of all
-* functions is responsible for ensuring mutual exclusion for an IPIF.  Mutual
-* exclusion across multiple IPIF components is not necessary.
-*
-* NOTES:
-*
-* None.
-*
-* MODIFICATION HISTORY:
-*
-* Ver	Who  Date     Changes
-* ----- ---- -------- -----------------------------------------------
-* 1.23b jhl  02/27/01 Repartioned to minimize size
-*
-******************************************************************************/
-
-#ifndef XIPIF_H			/* prevent circular inclusions */
-#define XIPIF_H			/* by using protection macros */
-
-/***************************** Include Files *********************************/
-#include "xbasic_types.h"
-#include "xstatus.h"
-#include "xversion.h"
-
-/************************** Constant Definitions *****************************/
-
-/* the following constants define the register offsets for the registers of the
- * IPIF, there are some holes in the memory map for reserved addresses to allow
- * other registers to be added and still match the memory map of the interrupt
- * controller registers
- */
-#define XIIF_V123B_DISR_OFFSET	   0UL	/* device interrupt status register */
-#define XIIF_V123B_DIPR_OFFSET	   4UL	/* device interrupt pending register */
-#define XIIF_V123B_DIER_OFFSET	   8UL	/* device interrupt enable register */
-#define XIIF_V123B_DIIR_OFFSET	   24UL /* device interrupt ID register */
-#define XIIF_V123B_DGIER_OFFSET	   28UL /* device global interrupt enable reg */
-#define XIIF_V123B_IISR_OFFSET	   32UL /* IP interrupt status register */
-#define XIIF_V123B_IIER_OFFSET	   40UL /* IP interrupt enable register */
-#define XIIF_V123B_RESETR_OFFSET   64UL /* reset register */
-
-#define XIIF_V123B_RESET_MASK		  0xAUL
-
-/* the following constant is used for the device global interrupt enable
- * register, to enable all interrupts for the device, this is the only bit
- * in the register
- */
-#define XIIF_V123B_GINTR_ENABLE_MASK	  0x80000000UL
-
-/* the following constants contain the masks to identify each internal IPIF
- * condition in the device registers of the IPIF, interrupts are assigned
- * in the register from LSB to the MSB
- */
-#define XIIF_V123B_ERROR_MASK		  1UL	/* LSB of the register */
-
-/* The following constants contain interrupt IDs which identify each internal
- * IPIF condition, this value must correlate with the mask constant for the
- * error
- */
-#define XIIF_V123B_ERROR_INTERRUPT_ID	  0	/* interrupt bit #, (LSB = 0) */
-#define XIIF_V123B_NO_INTERRUPT_ID	  128	/* no interrupts are pending */
-
-/**************************** Type Definitions *******************************/
-
-/***************** Macros (Inline Functions) Definitions *********************/
-
-/******************************************************************************
-*
-* MACRO:
-*
-* XIIF_V123B_RESET
-*
-* DESCRIPTION:
-*
-* Reset the IPIF component and hardware.  This is a destructive operation that
-* could cause the loss of data since resetting the IPIF of a device also
-* resets the device using the IPIF and any blocks, such as FIFOs or DMA
-* channels, within the IPIF.  All registers of the IPIF will contain their
-* reset value when this function returns.
-*
-* ARGUMENTS:
-*
-* RegBaseAddress contains the base address of the IPIF registers.
-*
-* RETURN VALUE:
-*
-* None.
-*
-* NOTES:
-*
-* None.
-*
-******************************************************************************/
-
-/* the following constant is used in the reset register to cause the IPIF to
- * reset
- */
-#define XIIF_V123B_RESET(RegBaseAddress) \
-    XIo_Out32(RegBaseAddress + XIIF_V123B_RESETR_OFFSET, XIIF_V123B_RESET_MASK)
-
-/******************************************************************************
-*
-* MACRO:
-*
-* XIIF_V123B_WRITE_DISR
-*
-* DESCRIPTION:
-*
-* This function sets the device interrupt status register to the value.
-* This register indicates the status of interrupt sources for a device
-* which contains the IPIF.  The status is independent of whether interrupts
-* are enabled and could be used for polling a device at a higher level rather
-* than a more detailed level.
-*
-* Each bit of the register correlates to a specific interrupt source within the
-* device which contains the IPIF.  With the exception of some internal IPIF
-* conditions, the contents of this register are not latched but indicate
-* the live status of the interrupt sources within the device.  Writing any of
-* the non-latched bits of the register will have no effect on the register.
-*
-* For the latched bits of this register only, setting a bit which is zero
-* within this register causes an interrupt to generated.  The device global
-* interrupt enable register and the device interrupt enable register must be set
-* appropriately to allow an interrupt to be passed out of the device. The
-* interrupt is cleared by writing to this register with the bits to be
-* cleared set to a one and all others to zero.	This register implements a
-* toggle on write functionality meaning any bits which are set in the value
-* written cause the bits in the register to change to the opposite state.
-*
-* This function writes the specified value to the register such that
-* some bits may be set and others cleared.  It is the caller's responsibility
-* to get the value of the register prior to setting the value to prevent a
-* destructive behavior.
-*
-* ARGUMENTS:
-*
-* RegBaseAddress contains the base address of the IPIF registers.
-*
-* Status contains the value to be written to the interrupt status register of
-* the device.  The only bits which can be written are the latched bits which
-* contain the internal IPIF conditions.	 The following values may be used to
-* set the status register or clear an interrupt condition.
-*
-*   XIIF_V123B_ERROR_MASK     Indicates a device error in the IPIF
-*
-* RETURN VALUE:
-*
-* None.
-*
-* NOTES:
-*
-* None.
-*
-******************************************************************************/
-#define XIIF_V123B_WRITE_DISR(RegBaseAddress, Status) \
-    XIo_Out32((RegBaseAddress) + XIIF_V123B_DISR_OFFSET, (Status))
-
-/******************************************************************************
-*
-* MACRO:
-*
-* XIIF_V123B_READ_DISR
-*
-* DESCRIPTION:
-*
-* This function gets the device interrupt status register contents.
-* This register indicates the status of interrupt sources for a device
-* which contains the IPIF.  The status is independent of whether interrupts
-* are enabled and could be used for polling a device at a higher level.
-*
-* Each bit of the register correlates to a specific interrupt source within the
-* device which contains the IPIF.  With the exception of some internal IPIF
-* conditions, the contents of this register are not latched but indicate
-* the live status of the interrupt sources within the device.
-*
-* For only the latched bits of this register, the interrupt may be cleared by
-* writing to these bits in the status register.
-*
-* ARGUMENTS:
-*
-* RegBaseAddress contains the base address of the IPIF registers.
-*
-* RETURN VALUE:
-*
-* A status which contains the value read from the interrupt status register of
-* the device. The bit definitions are specific to the device with
-* the exception of the latched internal IPIF condition bits. The following
-* values may be used to detect internal IPIF conditions in the status.
-*
-*   XIIF_V123B_ERROR_MASK     Indicates a device error in the IPIF
-*
-* NOTES:
-*
-* None.
-*
-******************************************************************************/
-#define XIIF_V123B_READ_DISR(RegBaseAddress) \
-    XIo_In32((RegBaseAddress) + XIIF_V123B_DISR_OFFSET)
-
-/******************************************************************************
-*
-* MACRO:
-*
-* XIIF_V123B_WRITE_DIER
-*
-* DESCRIPTION:
-*
-* This function sets the device interrupt enable register contents.
-* This register controls which interrupt sources of the device are allowed to
-* generate an interrupt.  The device global interrupt enable register must also
-* be set appropriately for an interrupt to be passed out of the device.
-*
-* Each bit of the register correlates to a specific interrupt source within the
-* device which contains the IPIF.  Setting a bit in this register enables that
-* interrupt source to generate an interrupt.  Clearing a bit in this register
-* disables interrupt generation for that interrupt source.
-*
-* This function writes only the specified value to the register such that
-* some interrupts source may be enabled and others disabled.  It is the
-* caller's responsibility to get the value of the interrupt enable register
-* prior to setting the value to prevent an destructive behavior.
-*
-* An interrupt source may not be enabled to generate an interrupt, but can
-* still be polled in the interrupt status register.
-*
-* ARGUMENTS:
-*
-* RegBaseAddress contains the base address of the IPIF registers.
-*
-* Enable contains the value to be written to the interrupt enable register
-* of the device.  The bit definitions are specific to the device with
-* the exception of the internal IPIF conditions. The following
-* values may be used to enable the internal IPIF conditions interrupts.
-*
-*   XIIF_V123B_ERROR_MASK     Indicates a device error in the IPIF
-*
-* RETURN VALUE:
-*
-* None.
-*
-* NOTES:
-*
-* Signature: u32 XIIF_V123B_WRITE_DIER(u32 RegBaseAddress,
-*					  u32 Enable)
-*
-******************************************************************************/
-#define XIIF_V123B_WRITE_DIER(RegBaseAddress, Enable) \
-    XIo_Out32((RegBaseAddress) + XIIF_V123B_DIER_OFFSET, (Enable))
-
-/******************************************************************************
-*
-* MACRO:
-*
-* XIIF_V123B_READ_DIER
-*
-* DESCRIPTION:
-*
-* This function gets the device interrupt enable register contents.
-* This register controls which interrupt sources of the device
-* are allowed to generate an interrupt.	 The device global interrupt enable
-* register and the device interrupt enable register must also be set
-* appropriately for an interrupt to be passed out of the device.
-*
-* Each bit of the register correlates to a specific interrupt source within the
-* device which contains the IPIF.  Setting a bit in this register enables that
-* interrupt source to generate an interrupt if the global enable is set
-* appropriately.  Clearing a bit in this register disables interrupt generation
-* for that interrupt source regardless of the global interrupt enable.
-*
-* ARGUMENTS:
-*
-* RegBaseAddress contains the base address of the IPIF registers.
-*
-* RETURN VALUE:
-*
-* The value read from the interrupt enable register of the device.  The bit
-* definitions are specific to the device with the exception of the internal
-* IPIF conditions. The following values may be used to determine from the
-* value if the internal IPIF conditions interrupts are enabled.
-*
-*   XIIF_V123B_ERROR_MASK     Indicates a device error in the IPIF
-*
-* NOTES:
-*
-* None.
-*
-******************************************************************************/
-#define XIIF_V123B_READ_DIER(RegBaseAddress) \
-    XIo_In32((RegBaseAddress) + XIIF_V123B_DIER_OFFSET)
-
-/******************************************************************************
-*
-* MACRO:
-*
-* XIIF_V123B_READ_DIPR
-*
-* DESCRIPTION:
-*
-* This function gets the device interrupt pending register contents.
-* This register indicates the pending interrupt sources, those that are waiting
-* to be serviced by the software, for a device which contains the IPIF.
-* An interrupt must be enabled in the interrupt enable register of the IPIF to
-* be pending.
-*
-* Each bit of the register correlates to a specific interrupt source within the
-* the device which contains the IPIF.  With the exception of some internal IPIF
-* conditions, the contents of this register are not latched since the condition
-* is latched in the IP interrupt status register, by an internal block of the
-* IPIF such as a FIFO or DMA channel, or by the IP of the device.  This register
-* is read only and is not latched, but it is necessary to acknowledge (clear)
-* the interrupt condition by performing the appropriate processing for the IP
-* or block within the IPIF.
-*
-* This register can be thought of as the contents of the interrupt status
-* register ANDed with the contents of the interrupt enable register.
-*
-* ARGUMENTS:
-*
-* RegBaseAddress contains the base address of the IPIF registers.
-*
-* RETURN VALUE:
-*
-* The value read from the interrupt pending register of the device.  The bit
-* definitions are specific to the device with the exception of the latched
-* internal IPIF condition bits. The following values may be used to detect
-* internal IPIF conditions in the value.
-*
-*   XIIF_V123B_ERROR_MASK     Indicates a device error in the IPIF
-*
-* NOTES:
-*
-* None.
-*
-******************************************************************************/
-#define XIIF_V123B_READ_DIPR(RegBaseAddress) \
-    XIo_In32((RegBaseAddress) + XIIF_V123B_DIPR_OFFSET)
-
-/******************************************************************************
-*
-* MACRO:
-*
-* XIIF_V123B_READ_DIIR
-*
-* DESCRIPTION:
-*
-* This function gets the device interrupt ID for the highest priority interrupt
-* which is pending from the interrupt ID register. This function provides
-* priority resolution such that faster interrupt processing is possible.
-* Without priority resolution, it is necessary for the software to read the
-* interrupt pending register and then check each interrupt source to determine
-* if an interrupt is pending.  Priority resolution becomes more important as the
-* number of interrupt sources becomes larger.
-*
-* Interrupt priorities are based upon the bit position of the interrupt in the
-* interrupt pending register with bit 0 being the highest priority. The
-* interrupt ID is the priority of the interrupt, 0 - 31, with 0 being the
-* highest priority. The interrupt ID register is live rather than latched such
-* that multiple calls to this function may not yield the same results.	A
-* special value, outside of the interrupt priority range of 0 - 31, is
-* contained in the register which indicates that no interrupt is pending.  This
-* may be useful for allowing software to continue processing interrupts in a
-* loop until there are no longer any interrupts pending.
-*
-* The interrupt ID is designed to allow a function pointer table to be used
-* in the software such that the interrupt ID is used as an index into that
-* table.  The function pointer table could contain an instance pointer, such
-* as to DMA channel, and a function pointer to the function which handles
-* that interrupt.  This design requires the interrupt processing of the device
-* driver to be partitioned into smaller more granular pieces based upon
-* hardware used by the device, such as DMA channels and FIFOs.
-*
-* It is not mandatory that this function be used by the device driver software.
-* It may choose to read the pending register and resolve the pending interrupt
-* priorities on it's own.
-*
-* ARGUMENTS:
-*
-* RegBaseAddress contains the base address of the IPIF registers.
-*
-* RETURN VALUE:
-*
-* An interrupt ID, 0 - 31, which identifies the highest priority interrupt
-* which is pending.  A value of XIIF_NO_INTERRUPT_ID indicates that there is
-* no interrupt pending. The following values may be used to identify the
-* interrupt ID for the internal IPIF interrupts.
-*
-*   XIIF_V123B_ERROR_INTERRUPT_ID     Indicates a device error in the IPIF
-*
-* NOTES:
-*
-* None.
-*
-******************************************************************************/
-#define XIIF_V123B_READ_DIIR(RegBaseAddress) \
-    XIo_In32((RegBaseAddress) + XIIF_V123B_DIIR_OFFSET)
-
-/******************************************************************************
-*
-* MACRO:
-*
-* XIIF_V123B_GLOBAL_INTR_DISABLE
-*
-* DESCRIPTION:
-*
-* This function disables all interrupts for the device by writing to the global
-* interrupt enable register.  This register provides the ability to disable
-* interrupts without any modifications to the interrupt enable register such
-* that it is minimal effort to restore the interrupts to the previous enabled
-* state.  The corresponding function, XIpIf_GlobalIntrEnable, is provided to
-* restore the interrupts to the previous enabled state.	 This function is
-* designed to be used in critical sections of device drivers such that it is
-* not necessary to disable other device interrupts.
-*
-* ARGUMENTS:
-*
-* RegBaseAddress contains the base address of the IPIF registers.
-*
-* RETURN VALUE:
-*
-* None.
-*
-* NOTES:
-*
-* None.
-*
-******************************************************************************/
-#define XIIF_V123B_GINTR_DISABLE(RegBaseAddress) \
-    XIo_Out32((RegBaseAddress) + XIIF_V123B_DGIER_OFFSET, 0)
-
-/******************************************************************************
-*
-* MACRO:
-*
-* XIIF_V123B_GINTR_ENABLE
-*
-* DESCRIPTION:
-*
-* This function writes to the global interrupt enable register to enable
-* interrupts from the device.  This register provides the ability to enable
-* interrupts without any modifications to the interrupt enable register such
-* that it is minimal effort to restore the interrupts to the previous enabled
-* state.  This function does not enable individual interrupts as the interrupt
-* enable register must be set appropriately.  This function is designed to be
-* used in critical sections of device drivers such that it is not necessary to
-* disable other device interrupts.
-*
-* ARGUMENTS:
-*
-* RegBaseAddress contains the base address of the IPIF registers.
-*
-* RETURN VALUE:
-*
-* None.
-*
-* NOTES:
-*
-* None.
-*
-******************************************************************************/
-#define XIIF_V123B_GINTR_ENABLE(RegBaseAddress)		  \
-    XIo_Out32((RegBaseAddress) + XIIF_V123B_DGIER_OFFSET, \
-	       XIIF_V123B_GINTR_ENABLE_MASK)
-
-/******************************************************************************
-*
-* MACRO:
-*
-* XIIF_V123B_IS_GINTR_ENABLED
-*
-* DESCRIPTION:
-*
-* This function determines if interrupts are enabled at the global level by
-* reading the gloabl interrupt register. This register provides the ability to
-* disable interrupts without any modifications to the interrupt enable register
-* such that it is minimal effort to restore the interrupts to the previous
-* enabled state.
-*
-* ARGUMENTS:
-*
-* RegBaseAddress contains the base address of the IPIF registers.
-*
-* RETURN VALUE:
-*
-* XTRUE if interrupts are enabled for the IPIF, XFALSE otherwise.
-*
-* NOTES:
-*
-* None.
-*
-******************************************************************************/
-#define XIIF_V123B_IS_GINTR_ENABLED(RegBaseAddress)		\
-    (XIo_In32((RegBaseAddress) + XIIF_V123B_DGIER_OFFSET) ==	\
-	      XIIF_V123B_GINTR_ENABLE_MASK)
-
-/******************************************************************************
-*
-* MACRO:
-*
-* XIIF_V123B_WRITE_IISR
-*
-* DESCRIPTION:
-*
-* This function sets the IP interrupt status register to the specified value.
-* This register indicates the status of interrupt sources for the IP of the
-* device.  The IP is defined as the part of the device that connects to the
-* IPIF.	 The status is independent of whether interrupts are enabled such that
-* the status register may also be polled when interrupts are not enabled.
-*
-* Each bit of the register correlates to a specific interrupt source within the
-* IP.  All bits of this register are latched. Setting a bit which is zero
-* within this register causes an interrupt to be generated.  The device global
-* interrupt enable register and the device interrupt enable register must be set
-* appropriately to allow an interrupt to be passed out of the device. The
-* interrupt is cleared by writing to this register with the bits to be
-* cleared set to a one and all others to zero.	This register implements a
-* toggle on write functionality meaning any bits which are set in the value
-* written cause the bits in the register to change to the opposite state.
-*
-* This function writes only the specified value to the register such that
-* some status bits may be set and others cleared.  It is the caller's
-* responsibility to get the value of the register prior to setting the value
-* to prevent an destructive behavior.
-*
-* ARGUMENTS:
-*
-* RegBaseAddress contains the base address of the IPIF registers.
-*
-* Status contains the value to be written to the IP interrupt status
-* register.  The bit definitions are specific to the device IP.
-*
-* RETURN VALUE:
-*
-* None.
-*
-* NOTES:
-*
-* None.
-*
-******************************************************************************/
-#define XIIF_V123B_WRITE_IISR(RegBaseAddress, Status) \
-    XIo_Out32((RegBaseAddress) + XIIF_V123B_IISR_OFFSET, (Status))
-
-/******************************************************************************
-*
-* MACRO:
-*
-* XIIF_V123B_READ_IISR
-*
-* DESCRIPTION:
-*
-* This function gets the contents of the IP interrupt status register.
-* This register indicates the status of interrupt sources for the IP of the
-* device.  The IP is defined as the part of the device that connects to the
-* IPIF. The status is independent of whether interrupts are enabled such
-* that the status register may also be polled when interrupts are not enabled.
-*
-* Each bit of the register correlates to a specific interrupt source within the
-* device.  All bits of this register are latched.  Writing a 1 to a bit within
-* this register causes an interrupt to be generated if enabled in the interrupt
-* enable register and the global interrupt enable is set.  Since the status is
-* latched, each status bit must be acknowledged in order for the bit in the
-* status register to be updated.  Each bit can be acknowledged by writing a
-* 0 to the bit in the status register.
-
-* ARGUMENTS:
-*
-* RegBaseAddress contains the base address of the IPIF registers.
-*
-* RETURN VALUE:
-*
-* A status which contains the value read from the IP interrupt status register.
-* The bit definitions are specific to the device IP.
-*
-* NOTES:
-*
-* None.
-*
-******************************************************************************/
-#define XIIF_V123B_READ_IISR(RegBaseAddress) \
-    XIo_In32((RegBaseAddress) + XIIF_V123B_IISR_OFFSET)
-
-/******************************************************************************
-*
-* MACRO:
-*
-* XIIF_V123B_WRITE_IIER
-*
-* DESCRIPTION:
-*
-* This function sets the IP interrupt enable register contents.	 This register
-* controls which interrupt sources of the IP are allowed to generate an
-* interrupt.  The global interrupt enable register and the device interrupt
-* enable register must also be set appropriately for an interrupt to be
-* passed out of the device containing the IPIF and the IP.
-*
-* Each bit of the register correlates to a specific interrupt source within the
-* IP.  Setting a bit in this register enables the interrupt source to generate
-* an interrupt.	 Clearing a bit in this register disables interrupt generation
-* for that interrupt source.
-*
-* This function writes only the specified value to the register such that
-* some interrupt sources may be enabled and others disabled.  It is the
-* caller's responsibility to get the value of the interrupt enable register
-* prior to setting the value to prevent an destructive behavior.
-*
-* ARGUMENTS:
-*
-* RegBaseAddress contains the base address of the IPIF registers.
-*
-* Enable contains the value to be written to the IP interrupt enable register.
-* The bit definitions are specific to the device IP.
-*
-* RETURN VALUE:
-*
-* None.
-*
-* NOTES:
-*
-* None.
-*
-******************************************************************************/
-#define XIIF_V123B_WRITE_IIER(RegBaseAddress, Enable) \
-    XIo_Out32((RegBaseAddress) + XIIF_V123B_IIER_OFFSET, (Enable))
-
-/******************************************************************************
-*
-* MACRO:
-*
-* XIIF_V123B_READ_IIER
-*
-* DESCRIPTION:
-*
-*
-* This function gets the IP interrupt enable register contents.	 This register
-* controls which interrupt sources of the IP are allowed to generate an
-* interrupt.  The global interrupt enable register and the device interrupt
-* enable register must also be set appropriately for an interrupt to be
-* passed out of the device containing the IPIF and the IP.
-*
-* Each bit of the register correlates to a specific interrupt source within the
-* IP.  Setting a bit in this register enables the interrupt source to generate
-* an interrupt.	 Clearing a bit in this register disables interrupt generation
-* for that interrupt source.
-*
-* ARGUMENTS:
-*
-* RegBaseAddress contains the base address of the IPIF registers.
-*
-* RETURN VALUE:
-*
-* The contents read from the IP interrupt enable register.  The bit definitions
-* are specific to the device IP.
-*
-* NOTES:
-*
-* Signature: u32 XIIF_V123B_READ_IIER(u32 RegBaseAddress)
-*
-******************************************************************************/
-#define XIIF_V123B_READ_IIER(RegBaseAddress) \
-    XIo_In32((RegBaseAddress) + XIIF_V123B_IIER_OFFSET)
-
-/************************** Function Prototypes ******************************/
-
-/*
- * Initialization Functions
- */
-XStatus XIpIfV123b_SelfTest(u32 RegBaseAddress, u8 IpRegistersWidth);
-
-#endif				/* end of protection macro */
diff --git a/board/xilinx/common/xpacket_fifo_v1_00_b.c b/board/xilinx/common/xpacket_fifo_v1_00_b.c
deleted file mode 100644
index ae2d6d4..0000000
--- a/board/xilinx/common/xpacket_fifo_v1_00_b.c
+++ /dev/null
@@ -1,448 +0,0 @@
-/******************************************************************************
-*
-*     Author: Xilinx, Inc.
-*
-*
-*     This program is free software; you can redistribute it and/or modify it
-*     under the terms of the GNU General Public License as published by the
-*     Free Software Foundation; either version 2 of the License, or (at your
-*     option) any later version.
-*
-*
-*     XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS" AS A
-*     COURTESY TO YOU. BY PROVIDING THIS DESIGN, CODE, OR INFORMATION AS
-*     ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE, APPLICATION OR STANDARD,
-*     XILINX IS MAKING NO REPRESENTATION THAT THIS IMPLEMENTATION IS FREE
-*     FROM ANY CLAIMS OF INFRINGEMENT, AND YOU ARE RESPONSIBLE FOR OBTAINING
-*     ANY THIRD PARTY RIGHTS YOU MAY REQUIRE FOR YOUR IMPLEMENTATION.
-*     XILINX EXPRESSLY DISCLAIMS ANY WARRANTY WHATSOEVER WITH RESPECT TO
-*     THE ADEQUACY OF THE IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY
-*     WARRANTIES OR REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM
-*     CLAIMS OF INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND
-*     FITNESS FOR A PARTICULAR PURPOSE.
-*
-*
-*     Xilinx hardware products are not intended for use in life support
-*     appliances, devices, or systems. Use in such applications is
-*     expressly prohibited.
-*
-*
-*     (c) Copyright 2002-2004 Xilinx Inc.
-*     All rights reserved.
-*
-*
-*     You should have received a copy of the GNU General Public License along
-*     with this program; if not, write to the Free Software Foundation, Inc.,
-*     675 Mass Ave, Cambridge, MA 02139, USA.
-*
-******************************************************************************/
-/*****************************************************************************/
-/*
-*
-* @file xpacket_fifo_v1_00_b.c
-*
-* Contains functions for the XPacketFifoV100b component. See xpacket_fifo_v1_00_b.h
-* for more information about the component.
-*
-* <pre>
-* MODIFICATION HISTORY:
-*
-* Ver   Who  Date     Changes
-* ----- ---- -------- -----------------------------------------------
-* 1.00b rpm 03/26/02  First release
-* </pre>
-*
-*****************************************************************************/
-
-/***************************** Include Files *********************************/
-
-#include "xbasic_types.h"
-#include "xio.h"
-#include "xstatus.h"
-#include "xpacket_fifo_v1_00_b.h"
-
-/************************** Constant Definitions *****************************/
-
-/* width of a FIFO word */
-
-#define XPF_FIFO_WIDTH_BYTE_COUNT       4UL
-
-/**************************** Type Definitions *******************************/
-
-/***************** Macros (Inline Functions) Definitions *********************/
-
-/************************* Variable Definitions ******************************/
-
-/************************** Function Prototypes ******************************/
-
-/*****************************************************************************/
-/*
-*
-* This function initializes a packet FIFO.  Initialization resets the
-* FIFO such that it's empty and ready to use.
-*
-* @param InstancePtr contains a pointer to the FIFO to operate on.
-* @param RegBaseAddress contains the base address of the registers for
-*        the packet FIFO.
-* @param DataBaseAddress contains the base address of the data for
-*        the packet FIFO.
-*
-* @return
-*
-* Always returns XST_SUCCESS.
-*
-* @note
-*
-* None.
-*
-******************************************************************************/
-XStatus
-XPacketFifoV100b_Initialize(XPacketFifoV100b * InstancePtr,
-			    u32 RegBaseAddress, u32 DataBaseAddress)
-{
-	/* assert to verify input argument are valid */
-
-	XASSERT_NONVOID(InstancePtr != NULL);
-
-	/* initialize the component variables to the specified state */
-
-	InstancePtr->RegBaseAddress = RegBaseAddress;
-	InstancePtr->DataBaseAddress = DataBaseAddress;
-	InstancePtr->IsReady = XCOMPONENT_IS_READY;
-
-	/* reset the FIFO such that it's empty and ready to use and indicate the
-	 * initialization was successful, note that the is ready variable must be
-	 * set prior to calling the reset function to prevent an assert
-	 */
-	XPF_V100B_RESET(InstancePtr);
-
-	return XST_SUCCESS;
-}
-
-/*****************************************************************************/
-/*
-*
-* This function performs a self-test on the specified packet FIFO.  The self
-* test resets the FIFO and reads a register to determine if it is the correct
-* reset value.  This test is destructive in that any data in the FIFO will
-* be lost.
-*
-* @param InstancePtr is a pointer to the packet FIFO to be operated on.
-*
-* @param FifoType specifies the type of FIFO, read or write, for the self test.
-*        The FIFO type is specified by the values XPF_READ_FIFO_TYPE or
-*        XPF_WRITE_FIFO_TYPE.
-*
-* @return
-*
-* XST_SUCCESS is returned if the selftest is successful, or
-* XST_PFIFO_BAD_REG_VALUE indicating that the value readback from the
-* occupancy/vacancy count register after a reset does not match the
-* specified reset value.
-*
-* @note
-*
-* None.
-*
-******************************************************************************/
-XStatus
-XPacketFifoV100b_SelfTest(XPacketFifoV100b * InstancePtr, u32 FifoType)
-{
-	u32 Register;
-
-	/* assert to verify valid input arguments */
-
-	XASSERT_NONVOID(InstancePtr != NULL);
-	XASSERT_NONVOID((FifoType == XPF_READ_FIFO_TYPE) ||
-			(FifoType == XPF_WRITE_FIFO_TYPE));
-	XASSERT_NONVOID(InstancePtr->IsReady == XCOMPONENT_IS_READY);
-
-	/* reset the fifo and then check to make sure the occupancy/vacancy
-	 * register contents are correct for a reset condition
-	 */
-	XPF_V100B_RESET(InstancePtr);
-
-	Register = XIo_In32(InstancePtr->RegBaseAddress +
-			    XPF_COUNT_STATUS_REG_OFFSET);
-
-	/* check the value of the register to ensure that it's correct for the
-	 * specified FIFO type since both FIFO types reset to empty, but a bit
-	 * in the register changes definition based upon FIFO type
-	 */
-
-	if (FifoType == XPF_READ_FIFO_TYPE) {
-		/* check the regiser value for a read FIFO which should be empty */
-
-		if (Register != XPF_EMPTY_FULL_MASK) {
-			return XST_PFIFO_BAD_REG_VALUE;
-		}
-	} else {
-		/* check the register value for a write FIFO which should not be full
-		 * on reset
-		 */
-		if ((Register & XPF_EMPTY_FULL_MASK) != 0) {
-			return XST_PFIFO_BAD_REG_VALUE;
-		}
-	}
-
-	/* the test was successful */
-
-	return XST_SUCCESS;
-}
-
-/*****************************************************************************/
-/*
-*
-* Read data from a FIFO and puts it into a specified buffer. The packet FIFO is
-* currently 32 bits wide such that an input buffer which is a series of bytes
-* is filled from the FIFO a word at a time. If the requested byte count is not
-* a multiple of 32 bit words, it is necessary for this function to format the
-* remaining 32 bit word from the FIFO into a series of bytes in the buffer.
-* There may be up to 3 extra bytes which must be extracted from the last word
-* of the FIFO and put into the buffer.
-*
-* @param InstancePtr contains a pointer to the FIFO to operate on.
-* @param BufferPtr points to the memory buffer to write the data into. This
-*        buffer must be 32 bit aligned or an alignment exception could be
-*        generated. Since this buffer is a byte buffer, the data is assumed to
-*        be endian independent.
-* @param ByteCount contains the number of bytes to read from the FIFO. This
-*        number of bytes must be present in the FIFO or an error will be
-*        returned.
-*
-* @return
-*
-* XST_SUCCESS indicates the operation was successful.  If the number of
-* bytes specified by the byte count is not present in the FIFO
-* XST_PFIFO_LACK_OF_DATA is returned.
-*
-* If the function was successful, the specified buffer is modified to contain
-* the bytes which were removed from the FIFO.
-*
-* @note
-*
-* Note that the exact number of bytes which are present in the FIFO is
-* not known by this function.  It can only check for a number of 32 bit
-* words such that if the byte count specified is incorrect, but is still
-* possible based on the number of words in the FIFO, up to 3 garbage bytes
-* may be present at the end of the buffer.
-* <br><br>
-* This function assumes that if the device consuming data from the FIFO is
-* a byte device, the order of the bytes to be consumed is from the most
-* significant byte to the least significant byte of a 32 bit word removed
-* from the FIFO.
-*
-******************************************************************************/
-XStatus
-XPacketFifoV100b_Read(XPacketFifoV100b * InstancePtr,
-		      u8 * BufferPtr, u32 ByteCount)
-{
-	u32 FifoCount;
-	u32 WordCount;
-	u32 ExtraByteCount;
-	u32 *WordBuffer = (u32 *) BufferPtr;
-
-	/* assert to verify valid input arguments including 32 bit alignment of
-	 * the buffer pointer
-	 */
-	XASSERT_NONVOID(InstancePtr != NULL);
-	XASSERT_NONVOID(BufferPtr != NULL);
-	XASSERT_NONVOID(((u32) BufferPtr &
-			 (XPF_FIFO_WIDTH_BYTE_COUNT - 1)) == 0);
-	XASSERT_NONVOID(ByteCount != 0);
-	XASSERT_NONVOID(InstancePtr->IsReady == XCOMPONENT_IS_READY);
-
-	/* get the count of how many 32 bit words are in the FIFO, if there aren't
-	 * enought words to satisfy the request, return an error
-	 */
-
-	FifoCount = XIo_In32(InstancePtr->RegBaseAddress +
-			     XPF_COUNT_STATUS_REG_OFFSET) & XPF_COUNT_MASK;
-
-	if ((FifoCount * XPF_FIFO_WIDTH_BYTE_COUNT) < ByteCount) {
-		return XST_PFIFO_LACK_OF_DATA;
-	}
-
-	/* calculate the number of words to read from the FIFO before the word
-	 * containing the extra bytes, and calculate the number of extra bytes
-	 * the extra bytes are defined as those at the end of the buffer when
-	 * the buffer does not end on a 32 bit boundary
-	 */
-	WordCount = ByteCount / XPF_FIFO_WIDTH_BYTE_COUNT;
-	ExtraByteCount = ByteCount % XPF_FIFO_WIDTH_BYTE_COUNT;
-
-	/* Read the 32 bit words from the FIFO for all the buffer except the
-	 * last word which contains the extra bytes, the following code assumes
-	 * that the buffer is 32 bit aligned, otherwise an alignment exception could
-	 * be generated
-	 */
-	for (FifoCount = 0; FifoCount < WordCount; FifoCount++) {
-		WordBuffer[FifoCount] = XIo_In32(InstancePtr->DataBaseAddress);
-	}
-
-	/* if there are extra bytes to handle, read the last word from the FIFO
-	 * and insert the extra bytes into the buffer
-	 */
-	if (ExtraByteCount > 0) {
-		u32 LastWord;
-		u8 *ExtraBytesBuffer = (u8 *) (WordBuffer + WordCount);
-
-		/* get the last word from the FIFO for the extra bytes */
-
-		LastWord = XIo_In32(InstancePtr->DataBaseAddress);
-
-		/* one extra byte in the last word, put the byte into the next location
-		 * of the buffer, bytes in a word of the FIFO are ordered from most
-		 * significant byte to least
-		 */
-		if (ExtraByteCount == 1) {
-			ExtraBytesBuffer[0] = (u8) (LastWord >> 24);
-		}
-
-		/* two extra bytes in the last word, put each byte into the next two
-		 * locations of the buffer
-		 */
-		else if (ExtraByteCount == 2) {
-			ExtraBytesBuffer[0] = (u8) (LastWord >> 24);
-			ExtraBytesBuffer[1] = (u8) (LastWord >> 16);
-		}
-		/* three extra bytes in the last word, put each byte into the next three
-		 * locations of the buffer
-		 */
-		else if (ExtraByteCount == 3) {
-			ExtraBytesBuffer[0] = (u8) (LastWord >> 24);
-			ExtraBytesBuffer[1] = (u8) (LastWord >> 16);
-			ExtraBytesBuffer[2] = (u8) (LastWord >> 8);
-		}
-	}
-	return XST_SUCCESS;
-}
-
-/*****************************************************************************/
-/*
-*
-* Write data into a packet FIFO. The packet FIFO is currently 32 bits wide
-* such that an input buffer which is a series of bytes must be written into the
-* FIFO a word at a time. If the buffer is not a multiple of 32 bit words, it is
-* necessary for this function to format the remaining bytes into a single 32
-* bit word to be inserted into the FIFO. This is necessary to avoid any
-* accesses past the end of the buffer.
-*
-* @param InstancePtr contains a pointer to the FIFO to operate on.
-* @param BufferPtr points to the memory buffer that data is to be read from
-*        and written into the FIFO. Since this buffer is a byte buffer, the data
-*        is assumed to be endian independent. This buffer must be 32 bit aligned
-*        or an alignment exception could be generated.
-* @param ByteCount contains the number of bytes to read from the buffer and to
-*        write to the FIFO.
-*
-* @return
-*
-* XST_SUCCESS is returned if the operation succeeded.  If there is not enough
-* room in the FIFO to hold the specified bytes, XST_PFIFO_NO_ROOM is
-* returned.
-*
-* @note
-*
-* This function assumes that if the device inserting data into the FIFO is
-* a byte device, the order of the bytes in each 32 bit word is from the most
-* significant byte to the least significant byte.
-*
-******************************************************************************/
-XStatus
-XPacketFifoV100b_Write(XPacketFifoV100b * InstancePtr,
-		       u8 * BufferPtr, u32 ByteCount)
-{
-	u32 FifoCount;
-	u32 WordCount;
-	u32 ExtraByteCount;
-	u32 *WordBuffer = (u32 *) BufferPtr;
-
-	/* assert to verify valid input arguments including 32 bit alignment of
-	 * the buffer pointer
-	 */
-	XASSERT_NONVOID(InstancePtr != NULL);
-	XASSERT_NONVOID(BufferPtr != NULL);
-	XASSERT_NONVOID(((u32) BufferPtr &
-			 (XPF_FIFO_WIDTH_BYTE_COUNT - 1)) == 0);
-	XASSERT_NONVOID(ByteCount != 0);
-	XASSERT_NONVOID(InstancePtr->IsReady == XCOMPONENT_IS_READY);
-
-	/* get the count of how many words may be inserted into the FIFO */
-
-	FifoCount = XIo_In32(InstancePtr->RegBaseAddress +
-			     XPF_COUNT_STATUS_REG_OFFSET) & XPF_COUNT_MASK;
-
-	/* Calculate the number of 32 bit words required to insert the specified
-	 * number of bytes in the FIFO and determine the number of extra bytes
-	 * if the buffer length is not a multiple of 32 bit words
-	 */
-
-	WordCount = ByteCount / XPF_FIFO_WIDTH_BYTE_COUNT;
-	ExtraByteCount = ByteCount % XPF_FIFO_WIDTH_BYTE_COUNT;
-
-	/* take into account the extra bytes in the total word count */
-
-	if (ExtraByteCount > 0) {
-		WordCount++;
-	}
-
-	/* if there's not enough room in the FIFO to hold the specified
-	 * number of bytes, then indicate an error,
-	 */
-	if (FifoCount < WordCount) {
-		return XST_PFIFO_NO_ROOM;
-	}
-
-	/* readjust the word count to not take into account the extra bytes */
-
-	if (ExtraByteCount > 0) {
-		WordCount--;
-	}
-
-	/* Write all the bytes of the buffer which can be written as 32 bit
-	 * words into the FIFO, waiting to handle the extra bytes seperately
-	 */
-	for (FifoCount = 0; FifoCount < WordCount; FifoCount++) {
-		XIo_Out32(InstancePtr->DataBaseAddress, WordBuffer[FifoCount]);
-	}
-
-	/* if there are extra bytes to handle, extract them from the buffer
-	 * and create a 32 bit word and write it to the FIFO
-	 */
-	if (ExtraByteCount > 0) {
-		u32 LastWord = 0;
-		u8 *ExtraBytesBuffer = (u8 *) (WordBuffer + WordCount);
-
-		/* one extra byte in the buffer, put the byte into the last word
-		 * to be inserted into the FIFO, perform this processing inline rather
-		 * than in a loop to help performance
-		 */
-		if (ExtraByteCount == 1) {
-			LastWord = ExtraBytesBuffer[0] << 24;
-		}
-
-		/* two extra bytes in the buffer, put each byte into the last word
-		 * to be inserted into the FIFO
-		 */
-		else if (ExtraByteCount == 2) {
-			LastWord = ExtraBytesBuffer[0] << 24 |
-			    ExtraBytesBuffer[1] << 16;
-		}
-
-		/* three extra bytes in the buffer, put each byte into the last word
-		 * to be inserted into the FIFO
-		 */
-		else if (ExtraByteCount == 3) {
-			LastWord = ExtraBytesBuffer[0] << 24 |
-			    ExtraBytesBuffer[1] << 16 |
-			    ExtraBytesBuffer[2] << 8;
-		}
-
-		/* write the last 32 bit word to the FIFO and return with no errors */
-
-		XIo_Out32(InstancePtr->DataBaseAddress, LastWord);
-	}
-
-	return XST_SUCCESS;
-}
diff --git a/board/xilinx/common/xpacket_fifo_v1_00_b.h b/board/xilinx/common/xpacket_fifo_v1_00_b.h
deleted file mode 100644
index 1cda0e8..0000000
--- a/board/xilinx/common/xpacket_fifo_v1_00_b.h
+++ /dev/null
@@ -1,306 +0,0 @@
-/******************************************************************************
-*
-*     Author: Xilinx, Inc.
-*
-*
-*     This program is free software; you can redistribute it and/or modify it
-*     under the terms of the GNU General Public License as published by the
-*     Free Software Foundation; either version 2 of the License, or (at your
-*     option) any later version.
-*
-*
-*     XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS" AS A
-*     COURTESY TO YOU. BY PROVIDING THIS DESIGN, CODE, OR INFORMATION AS
-*     ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE, APPLICATION OR STANDARD,
-*     XILINX IS MAKING NO REPRESENTATION THAT THIS IMPLEMENTATION IS FREE
-*     FROM ANY CLAIMS OF INFRINGEMENT, AND YOU ARE RESPONSIBLE FOR OBTAINING
-*     ANY THIRD PARTY RIGHTS YOU MAY REQUIRE FOR YOUR IMPLEMENTATION.
-*     XILINX EXPRESSLY DISCLAIMS ANY WARRANTY WHATSOEVER WITH RESPECT TO
-*     THE ADEQUACY OF THE IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY
-*     WARRANTIES OR REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM
-*     CLAIMS OF INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND
-*     FITNESS FOR A PARTICULAR PURPOSE.
-*
-*
-*     Xilinx hardware products are not intended for use in life support
-*     appliances, devices, or systems. Use in such applications is
-*     expressly prohibited.
-*
-*
-*     (c) Copyright 2002-2004 Xilinx Inc.
-*     All rights reserved.
-*
-*
-*     You should have received a copy of the GNU General Public License along
-*     with this program; if not, write to the Free Software Foundation, Inc.,
-*     675 Mass Ave, Cambridge, MA 02139, USA.
-*
-******************************************************************************/
-/*****************************************************************************/
-/*
-*
-* @file xpacket_fifo_v1_00_b.h
-*
-* This component is a common component because it's primary purpose is to
-* prevent code duplication in drivers. A driver which must handle a packet
-* FIFO uses this component rather than directly manipulating a packet FIFO.
-*
-* A FIFO is a device which has dual port memory such that one user may be
-* inserting data into the FIFO while another is consuming data from the FIFO.
-* A packet FIFO is designed for use with packet protocols such as Ethernet and
-* ATM.  It is typically only used with devices when DMA and/or Scatter Gather
-* is used.  It differs from a nonpacket FIFO in that it does not provide any
-* interrupts for thresholds of the FIFO such that it is less useful without
-* DMA.
-*
-* @note
-*
-* This component has the capability to generate an interrupt when an error
-* condition occurs.  It is the user's responsibility to provide the interrupt
-* processing to handle the interrupt. This component provides the ability to
-* determine if that interrupt is active, a deadlock condition, and the ability
-* to reset the FIFO to clear the condition. In this condition, the device which
-* is using the FIFO should also be reset to prevent other problems. This error
-* condition could occur as a normal part of operation if the size of the FIFO
-* is not setup correctly.  See the hardware IP specification for more details.
-*
-* <pre>
-* MODIFICATION HISTORY:
-*
-* Ver   Who  Date     Changes
-* ----- ---- -------- -----------------------------------------------
-* 1.00b rpm 03/26/02  First release
-* </pre>
-*
-*****************************************************************************/
-#ifndef XPACKET_FIFO_H		/* prevent circular inclusions */
-#define XPACKET_FIFO_H		/* by using protection macros */
-
-/***************************** Include Files *********************************/
-
-#include "xbasic_types.h"
-#include "xstatus.h"
-
-/************************** Constant Definitions *****************************/
-
-/*
- * These constants specify the FIFO type and are mutually exclusive
- */
-#define XPF_READ_FIFO_TYPE      0	/* a read FIFO */
-#define XPF_WRITE_FIFO_TYPE     1	/* a write FIFO */
-
-/*
- * These constants define the offsets to each of the registers from the
- * register base address, each of the constants are a number of bytes
- */
-#define XPF_RESET_REG_OFFSET            0UL
-#define XPF_MODULE_INFO_REG_OFFSET      0UL
-#define XPF_COUNT_STATUS_REG_OFFSET     4UL
-
-/*
- * This constant is used with the Reset Register
- */
-#define XPF_RESET_FIFO_MASK             0x0000000A
-
-/*
- * These constants are used with the Occupancy/Vacancy Count Register. This
- * register also contains FIFO status
- */
-#define XPF_COUNT_MASK                  0x0000FFFF
-#define XPF_DEADLOCK_MASK               0x20000000
-#define XPF_ALMOST_EMPTY_FULL_MASK      0x40000000
-#define XPF_EMPTY_FULL_MASK             0x80000000
-
-/**************************** Type Definitions *******************************/
-
-/*
- * The XPacketFifo driver instance data. The driver is required to allocate a
- * variable of this type for every packet FIFO in the device.
- */
-typedef struct {
-	u32 RegBaseAddress;	/* Base address of registers */
-	u32 IsReady;		/* Device is initialized and ready */
-	u32 DataBaseAddress;	/* Base address of data for FIFOs */
-} XPacketFifoV100b;
-
-/***************** Macros (Inline Functions) Definitions *********************/
-
-/*****************************************************************************/
-/*
-*
-* Reset the specified packet FIFO.  Resetting a FIFO will cause any data
-* contained in the FIFO to be lost.
-*
-* @param InstancePtr contains a pointer to the FIFO to operate on.
-*
-* @return
-*
-* None.
-*
-* @note
-*
-* Signature: void XPF_V100B_RESET(XPacketFifoV100b *InstancePtr)
-*
-******************************************************************************/
-#define XPF_V100B_RESET(InstancePtr) \
-    XIo_Out32((InstancePtr)->RegBaseAddress + XPF_RESET_REG_OFFSET, XPF_RESET_FIFO_MASK);
-
-/*****************************************************************************/
-/*
-*
-* Get the occupancy count for a read packet FIFO and the vacancy count for a
-* write packet FIFO. These counts indicate the number of 32-bit words
-* contained (occupancy) in the FIFO or the number of 32-bit words available
-* to write (vacancy) in the FIFO.
-*
-* @param InstancePtr contains a pointer to the FIFO to operate on.
-*
-* @return
-*
-* The occupancy or vacancy count for the specified packet FIFO.
-*
-* @note
-*
-* Signature: u32 XPF_V100B_GET_COUNT(XPacketFifoV100b *InstancePtr)
-*
-******************************************************************************/
-#define XPF_V100B_GET_COUNT(InstancePtr) \
-    (XIo_In32((InstancePtr)->RegBaseAddress + XPF_COUNT_STATUS_REG_OFFSET) & \
-    XPF_COUNT_MASK)
-
-/*****************************************************************************/
-/*
-*
-* Determine if the specified packet FIFO is almost empty. Almost empty is
-* defined for a read FIFO when there is only one data word in the FIFO.
-*
-* @param InstancePtr contains a pointer to the FIFO to operate on.
-*
-* @return
-*
-* TRUE if the packet FIFO is almost empty, FALSE otherwise.
-*
-* @note
-*
-* Signature: u32 XPF_V100B_IS_ALMOST_EMPTY(XPacketFifoV100b *InstancePtr)
-*
-******************************************************************************/
-#define XPF_V100B_IS_ALMOST_EMPTY(InstancePtr) \
-    (XIo_In32((InstancePtr)->RegBaseAddress + XPF_COUNT_STATUS_REG_OFFSET) & \
-    XPF_ALMOST_EMPTY_FULL_MASK)
-
-/*****************************************************************************/
-/*
-*
-* Determine if the specified packet FIFO is almost full. Almost full is
-* defined for a write FIFO when there is only one available data word in the
-* FIFO.
-*
-* @param InstancePtr contains a pointer to the FIFO to operate on.
-*
-* @return
-*
-* TRUE if the packet FIFO is almost full, FALSE otherwise.
-*
-* @note
-*
-* Signature: u32 XPF_V100B_IS_ALMOST_FULL(XPacketFifoV100b *InstancePtr)
-*
-******************************************************************************/
-#define XPF_V100B_IS_ALMOST_FULL(InstancePtr) \
-    (XIo_In32((InstancePtr)->RegBaseAddress + XPF_COUNT_STATUS_REG_OFFSET) & \
-    XPF_ALMOST_EMPTY_FULL_MASK)
-
-/*****************************************************************************/
-/*
-*
-* Determine if the specified packet FIFO is empty. This applies only to a
-* read FIFO.
-*
-* @param InstancePtr contains a pointer to the FIFO to operate on.
-*
-* @return
-*
-* TRUE if the packet FIFO is empty, FALSE otherwise.
-*
-* @note
-*
-* Signature: u32 XPF_V100B_IS_EMPTY(XPacketFifoV100b *InstancePtr)
-*
-******************************************************************************/
-#define XPF_V100B_IS_EMPTY(InstancePtr) \
-    (XIo_In32((InstancePtr)->RegBaseAddress + XPF_COUNT_STATUS_REG_OFFSET) & \
-    XPF_EMPTY_FULL_MASK)
-
-/*****************************************************************************/
-/*
-*
-* Determine if the specified packet FIFO is full. This applies only to a
-* write FIFO.
-*
-* @param InstancePtr contains a pointer to the FIFO to operate on.
-*
-* @return
-*
-* TRUE if the packet FIFO is full, FALSE otherwise.
-*
-* @note
-*
-* Signature: u32 XPF_V100B_IS_FULL(XPacketFifoV100b *InstancePtr)
-*
-******************************************************************************/
-#define XPF_V100B_IS_FULL(InstancePtr) \
-    (XIo_In32((InstancePtr)->RegBaseAddress + XPF_COUNT_STATUS_REG_OFFSET) & \
-    XPF_EMPTY_FULL_MASK)
-
-/*****************************************************************************/
-/*
-*
-* Determine if the specified packet FIFO is deadlocked.  This condition occurs
-* when the FIFO is full and empty at the same time and is caused by a packet
-* being written to the FIFO which exceeds the total data capacity of the FIFO.
-* It occurs because of the mark/restore features of the packet FIFO which allow
-* retransmission of a packet. The software should reset the FIFO and any devices
-* using the FIFO when this condition occurs.
-*
-* @param InstancePtr contains a pointer to the FIFO to operate on.
-*
-* @return
-*
-* TRUE if the packet FIFO is deadlocked, FALSE otherwise.
-*
-* @note
-*
-* This component has the capability to generate an interrupt when an error
-* condition occurs.  It is the user's responsibility to provide the interrupt
-* processing to handle the interrupt. This function provides the ability to
-* determine if a deadlock condition, and the ability to reset the FIFO to
-* clear the condition.
-*
-* In this condition, the device which is using the FIFO should also be reset
-* to prevent other problems. This error condition could occur as a normal part
-* of operation if the size of the FIFO is not setup correctly.
-*
-* Signature: u32 XPF_V100B_IS_DEADLOCKED(XPacketFifoV100b *InstancePtr)
-*
-******************************************************************************/
-#define XPF_V100B_IS_DEADLOCKED(InstancePtr) \
-    (XIo_In32((InstancePtr)->RegBaseAddress + XPF_COUNT_STATUS_REG_OFFSET) & \
-    XPF_DEADLOCK_MASK)
-
-/************************** Function Prototypes ******************************/
-
-/* Standard functions */
-
-XStatus XPacketFifoV100b_Initialize(XPacketFifoV100b * InstancePtr,
-				    u32 RegBaseAddress, u32 DataBaseAddress);
-XStatus XPacketFifoV100b_SelfTest(XPacketFifoV100b * InstancePtr, u32 FifoType);
-
-/* Data functions */
-
-XStatus XPacketFifoV100b_Read(XPacketFifoV100b * InstancePtr,
-			      u8 * ReadBufferPtr, u32 ByteCount);
-XStatus XPacketFifoV100b_Write(XPacketFifoV100b * InstancePtr,
-			       u8 * WriteBufferPtr, u32 ByteCount);
-
-#endif				/* end of protection macro */
diff --git a/board/xilinx/common/xstatus.h b/board/xilinx/common/xstatus.h
deleted file mode 100644
index ffda4d7..0000000
--- a/board/xilinx/common/xstatus.h
+++ /dev/null
@@ -1,347 +0,0 @@
-/******************************************************************************
-*
-*     Author: Xilinx, Inc.
-*
-*
-*     This program is free software; you can redistribute it and/or modify it
-*     under the terms of the GNU General Public License as published by the
-*     Free Software Foundation; either version 2 of the License, or (at your
-*     option) any later version.
-*
-*
-*     XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS" AS A
-*     COURTESY TO YOU. BY PROVIDING THIS DESIGN, CODE, OR INFORMATION AS
-*     ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE, APPLICATION OR STANDARD,
-*     XILINX IS MAKING NO REPRESENTATION THAT THIS IMPLEMENTATION IS FREE
-*     FROM ANY CLAIMS OF INFRINGEMENT, AND YOU ARE RESPONSIBLE FOR OBTAINING
-*     ANY THIRD PARTY RIGHTS YOU MAY REQUIRE FOR YOUR IMPLEMENTATION.
-*     XILINX EXPRESSLY DISCLAIMS ANY WARRANTY WHATSOEVER WITH RESPECT TO
-*     THE ADEQUACY OF THE IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY
-*     WARRANTIES OR REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM
-*     CLAIMS OF INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND
-*     FITNESS FOR A PARTICULAR PURPOSE.
-*
-*
-*     Xilinx hardware products are not intended for use in life support
-*     appliances, devices, or systems. Use in such applications is
-*     expressly prohibited.
-*
-*
-*     (c) Copyright 2002-2004 Xilinx Inc.
-*     All rights reserved.
-*
-*
-*     You should have received a copy of the GNU General Public License along
-*     with this program; if not, write to the Free Software Foundation, Inc.,
-*     675 Mass Ave, Cambridge, MA 02139, USA.
-*
-******************************************************************************/
-/*****************************************************************************/
-/**
-*
-* @file xstatus.h
-*
-* This file contains Xilinx software status codes.  Status codes have their
-* own data type called XStatus.  These codes are used throughout the Xilinx
-* device drivers.
-*
-******************************************************************************/
-
-#ifndef XSTATUS_H		/* prevent circular inclusions */
-#define XSTATUS_H		/* by using protection macros */
-
-/***************************** Include Files *********************************/
-
-#include "xbasic_types.h"
-
-/************************** Constant Definitions *****************************/
-
-/*********************** Common statuses 0 - 500 *****************************/
-
-#define XST_SUCCESS                     0L
-#define XST_FAILURE                     1L
-#define XST_DEVICE_NOT_FOUND            2L
-#define XST_DEVICE_BLOCK_NOT_FOUND      3L
-#define XST_INVALID_VERSION             4L
-#define XST_DEVICE_IS_STARTED           5L
-#define XST_DEVICE_IS_STOPPED           6L
-#define XST_FIFO_ERROR                  7L	/* an error occurred during an
-						   operation with a FIFO such as
-						   an underrun or overrun, this
-						   error requires the device to
-						   be reset */
-#define XST_RESET_ERROR                 8L	/* an error occurred which requires
-						   the device to be reset */
-#define XST_DMA_ERROR                   9L	/* a DMA error occurred, this error
-						   typically requires the device
-						   using the DMA to be reset */
-#define XST_NOT_POLLED                  10L	/* the device is not configured for
-						   polled mode operation */
-#define XST_FIFO_NO_ROOM                11L	/* a FIFO did not have room to put
-						   the specified data into */
-#define XST_BUFFER_TOO_SMALL            12L	/* the buffer is not large enough
-						   to hold the expected data */
-#define XST_NO_DATA                     13L	/* there was no data available */
-#define XST_REGISTER_ERROR              14L	/* a register did not contain the
-						   expected value */
-#define XST_INVALID_PARAM               15L	/* an invalid parameter was passed
-						   into the function */
-#define XST_NOT_SGDMA                   16L	/* the device is not configured for
-						   scatter-gather DMA operation */
-#define XST_LOOPBACK_ERROR              17L	/* a loopback test failed */
-#define XST_NO_CALLBACK                 18L	/* a callback has not yet been
-						 * registered */
-#define XST_NO_FEATURE                  19L	/* device is not configured with
-						 * the requested feature */
-#define XST_NOT_INTERRUPT               20L	/* device is not configured for
-						 * interrupt mode operation */
-#define XST_DEVICE_BUSY                 21L	/* device is busy */
-#define XST_ERROR_COUNT_MAX             22L	/* the error counters of a device
-						 * have maxed out */
-#define XST_IS_STARTED                  23L	/* used when part of device is
-						 * already started i.e.
-						 * sub channel */
-#define XST_IS_STOPPED                  24L	/* used when part of device is
-						 * already stopped i.e.
-						 * sub channel */
-
-/***************** Utility Component statuses 401 - 500  *********************/
-
-#define XST_MEMTEST_FAILED              401L	/* memory test failed */
-
-/***************** Common Components statuses 501 - 1000 *********************/
-
-/********************* Packet Fifo statuses 501 - 510 ************************/
-
-#define XST_PFIFO_LACK_OF_DATA          501L	/* not enough data in FIFO   */
-#define XST_PFIFO_NO_ROOM               502L	/* not enough room in FIFO   */
-#define XST_PFIFO_BAD_REG_VALUE         503L	/* self test, a register value
-						   was invalid after reset */
-
-/************************** DMA statuses 511 - 530 ***************************/
-
-#define XST_DMA_TRANSFER_ERROR          511L	/* self test, DMA transfer
-						   failed */
-#define XST_DMA_RESET_REGISTER_ERROR    512L	/* self test, a register value
-						   was invalid after reset */
-#define XST_DMA_SG_LIST_EMPTY           513L	/* scatter gather list contains
-						   no buffer descriptors ready
-						   to be processed */
-#define XST_DMA_SG_IS_STARTED           514L	/* scatter gather not stopped */
-#define XST_DMA_SG_IS_STOPPED           515L	/* scatter gather not running */
-#define XST_DMA_SG_LIST_FULL            517L	/* all the buffer desciptors of
-						   the scatter gather list are
-						   being used */
-#define XST_DMA_SG_BD_LOCKED            518L	/* the scatter gather buffer
-						   descriptor which is to be
-						   copied over in the scatter
-						   list is locked */
-#define XST_DMA_SG_NOTHING_TO_COMMIT    519L	/* no buffer descriptors have been
-						   put into the scatter gather
-						   list to be commited */
-#define XST_DMA_SG_COUNT_EXCEEDED       521L	/* the packet count threshold
-						   specified was larger than the
-						   total # of buffer descriptors
-						   in the scatter gather list */
-#define XST_DMA_SG_LIST_EXISTS          522L	/* the scatter gather list has
-						   already been created */
-#define XST_DMA_SG_NO_LIST              523L	/* no scatter gather list has
-						   been created */
-#define XST_DMA_SG_BD_NOT_COMMITTED     524L	/* the buffer descriptor which was
-						   being started was not committed
-						   to the list */
-#define XST_DMA_SG_NO_DATA              525L	/* the buffer descriptor to start
-						   has already been used by the
-						   hardware so it can't be reused
-						 */
-
-/************************** IPIF statuses 531 - 550 ***************************/
-
-#define XST_IPIF_REG_WIDTH_ERROR        531L	/* an invalid register width
-						   was passed into the function */
-#define XST_IPIF_RESET_REGISTER_ERROR   532L	/* the value of a register at
-						   reset was not valid */
-#define XST_IPIF_DEVICE_STATUS_ERROR    533L	/* a write to the device interrupt
-						   status register did not read
-						   back correctly */
-#define XST_IPIF_DEVICE_ACK_ERROR       534L	/* the device interrupt status
-						   register did not reset when
-						   acked */
-#define XST_IPIF_DEVICE_ENABLE_ERROR    535L	/* the device interrupt enable
-						   register was not updated when
-						   other registers changed */
-#define XST_IPIF_IP_STATUS_ERROR        536L	/* a write to the IP interrupt
-						   status register did not read
-						   back correctly */
-#define XST_IPIF_IP_ACK_ERROR           537L	/* the IP interrupt status register
-						   did not reset when acked */
-#define XST_IPIF_IP_ENABLE_ERROR        538L	/* IP interrupt enable register was
-						   not updated correctly when other
-						   registers changed */
-#define XST_IPIF_DEVICE_PENDING_ERROR   539L	/* The device interrupt pending
-						   register did not indicate the
-						   expected value */
-#define XST_IPIF_DEVICE_ID_ERROR        540L	/* The device interrupt ID register
-						   did not indicate the expected
-						   value */
-
-/****************** Device specific statuses 1001 - 4095 *********************/
-
-/********************* Ethernet statuses 1001 - 1050 *************************/
-
-#define XST_EMAC_MEMORY_SIZE_ERROR  1001L	/* Memory space is not big enough
-						 * to hold the minimum number of
-						 * buffers or descriptors */
-#define XST_EMAC_MEMORY_ALLOC_ERROR 1002L	/* Memory allocation failed */
-#define XST_EMAC_MII_READ_ERROR     1003L	/* MII read error */
-#define XST_EMAC_MII_BUSY           1004L	/* An MII operation is in progress */
-#define XST_EMAC_OUT_OF_BUFFERS     1005L	/* Adapter is out of buffers */
-#define XST_EMAC_PARSE_ERROR        1006L	/* Invalid adapter init string */
-#define XST_EMAC_COLLISION_ERROR    1007L	/* Excess deferral or late
-						 * collision on polled send */
-
-/*********************** UART statuses 1051 - 1075 ***************************/
-#define XST_UART
-
-#define XST_UART_INIT_ERROR         1051L
-#define XST_UART_START_ERROR        1052L
-#define XST_UART_CONFIG_ERROR       1053L
-#define XST_UART_TEST_FAIL          1054L
-#define XST_UART_BAUD_ERROR         1055L
-#define XST_UART_BAUD_RANGE         1056L
-
-/************************ IIC statuses 1076 - 1100 ***************************/
-
-#define XST_IIC_SELFTEST_FAILED         1076	/* self test failed            */
-#define XST_IIC_BUS_BUSY                1077	/* bus found busy              */
-#define XST_IIC_GENERAL_CALL_ADDRESS    1078	/* mastersend attempted with   */
-					     /* general call address        */
-#define XST_IIC_STAND_REG_RESET_ERROR   1079	/* A non parameterizable reg   */
-					     /* value after reset not valid */
-#define XST_IIC_TX_FIFO_REG_RESET_ERROR 1080	/* Tx fifo included in design  */
-					     /* value after reset not valid */
-#define XST_IIC_RX_FIFO_REG_RESET_ERROR 1081	/* Rx fifo included in design  */
-					     /* value after reset not valid */
-#define XST_IIC_TBA_REG_RESET_ERROR     1082	/* 10 bit addr incl in design  */
-					     /* value after reset not valid */
-#define XST_IIC_CR_READBACK_ERROR       1083	/* Read of the control register */
-					     /* didn't return value written */
-#define XST_IIC_DTR_READBACK_ERROR      1084	/* Read of the data Tx reg     */
-					     /* didn't return value written */
-#define XST_IIC_DRR_READBACK_ERROR      1085	/* Read of the data Receive reg */
-					     /* didn't return value written */
-#define XST_IIC_ADR_READBACK_ERROR      1086	/* Read of the data Tx reg     */
-					     /* didn't return value written */
-#define XST_IIC_TBA_READBACK_ERROR      1087	/* Read of the 10 bit addr reg */
-					     /* didn't return written value */
-#define XST_IIC_NOT_SLAVE               1088	/* The device isn't a slave    */
-
-/*********************** ATMC statuses 1101 - 1125 ***************************/
-
-#define XST_ATMC_ERROR_COUNT_MAX    1101L	/* the error counters in the ATM
-						   controller hit the max value
-						   which requires the statistics
-						   to be cleared */
-
-/*********************** Flash statuses 1126 - 1150 **************************/
-
-#define XST_FLASH_BUSY                1126L	/* Flash is erasing or programming */
-#define XST_FLASH_READY               1127L	/* Flash is ready for commands */
-#define XST_FLASH_ERROR               1128L	/* Flash had detected an internal
-						   error. Use XFlash_DeviceControl
-						   to retrieve device specific codes */
-#define XST_FLASH_ERASE_SUSPENDED     1129L	/* Flash is in suspended erase state */
-#define XST_FLASH_WRITE_SUSPENDED     1130L	/* Flash is in suspended write state */
-#define XST_FLASH_PART_NOT_SUPPORTED  1131L	/* Flash type not supported by
-						   driver */
-#define XST_FLASH_NOT_SUPPORTED       1132L	/* Operation not supported */
-#define XST_FLASH_TOO_MANY_REGIONS    1133L	/* Too many erase regions */
-#define XST_FLASH_TIMEOUT_ERROR       1134L	/* Programming or erase operation
-						   aborted due to a timeout */
-#define XST_FLASH_ADDRESS_ERROR       1135L	/* Accessed flash outside its
-						   addressible range */
-#define XST_FLASH_ALIGNMENT_ERROR     1136L	/* Write alignment error */
-#define XST_FLASH_BLOCKING_CALL_ERROR 1137L	/* Couldn't return immediately from
-						   write/erase function with
-						   XFL_NON_BLOCKING_WRITE/ERASE
-						   option cleared */
-#define XST_FLASH_CFI_QUERY_ERROR     1138L	/* Failed to query the device */
-
-/*********************** SPI statuses 1151 - 1175 ****************************/
-
-#define XST_SPI_MODE_FAULT          1151	/* master was selected as slave */
-#define XST_SPI_TRANSFER_DONE       1152	/* data transfer is complete */
-#define XST_SPI_TRANSMIT_UNDERRUN   1153	/* slave underruns transmit register */
-#define XST_SPI_RECEIVE_OVERRUN     1154	/* device overruns receive register */
-#define XST_SPI_NO_SLAVE            1155	/* no slave has been selected yet */
-#define XST_SPI_TOO_MANY_SLAVES     1156	/* more than one slave is being
-						 * selected */
-#define XST_SPI_NOT_MASTER          1157	/* operation is valid only as master */
-#define XST_SPI_SLAVE_ONLY          1158	/* device is configured as slave-only */
-#define XST_SPI_SLAVE_MODE_FAULT    1159	/* slave was selected while disabled */
-
-/********************** OPB Arbiter statuses 1176 - 1200 *********************/
-
-#define XST_OPBARB_INVALID_PRIORITY  1176	/* the priority registers have either
-						 * one master assigned to two or more
-						 * priorities, or one master not
-						 * assigned to any priority
-						 */
-#define XST_OPBARB_NOT_SUSPENDED     1177	/* an attempt was made to modify the
-						 * priority levels without first
-						 * suspending the use of priority
-						 * levels
-						 */
-#define XST_OPBARB_PARK_NOT_ENABLED  1178	/* bus parking by id was enabled but
-						 * bus parking was not enabled
-						 */
-#define XST_OPBARB_NOT_FIXED_PRIORITY 1179	/* the arbiter must be in fixed
-						 * priority mode to allow the
-						 * priorities to be changed
-						 */
-
-/************************ Intc statuses 1201 - 1225 **************************/
-
-#define XST_INTC_FAIL_SELFTEST      1201	/* self test failed */
-#define XST_INTC_CONNECT_ERROR      1202	/* interrupt already in use */
-
-/********************** TmrCtr statuses 1226 - 1250 **************************/
-
-#define XST_TMRCTR_TIMER_FAILED     1226	/* self test failed */
-
-/********************** WdtTb statuses 1251 - 1275 ***************************/
-
-#define XST_WDTTB_TIMER_FAILED      1251L
-
-/********************** PlbArb statuses 1276 - 1300 **************************/
-
-#define XST_PLBARB_FAIL_SELFTEST    1276L
-
-/********************** Plb2Opb statuses 1301 - 1325 *************************/
-
-#define XST_PLB2OPB_FAIL_SELFTEST   1301L
-
-/********************** Opb2Plb statuses 1326 - 1350 *************************/
-
-#define XST_OPB2PLB_FAIL_SELFTEST   1326L
-
-/********************** SysAce statuses 1351 - 1360 **************************/
-
-#define XST_SYSACE_NO_LOCK          1351L	/* No MPU lock has been granted */
-
-/********************** PCI Bridge statuses 1361 - 1375 **********************/
-
-#define XST_PCI_INVALID_ADDRESS     1361L
-
-/**************************** Type Definitions *******************************/
-
-/**
- * The status typedef.
- */
-typedef u32 XStatus;
-
-/***************** Macros (Inline Functions) Definitions *********************/
-
-/************************** Function Prototypes ******************************/
-
-#endif				/* end of protection macro */
diff --git a/board/xilinx/common/xversion.c b/board/xilinx/common/xversion.c
deleted file mode 100644
index c8a6915..0000000
--- a/board/xilinx/common/xversion.c
+++ /dev/null
@@ -1,350 +0,0 @@
-/******************************************************************************
-*
-*     Author: Xilinx, Inc.
-*
-*
-*     This program is free software; you can redistribute it and/or modify it
-*     under the terms of the GNU General Public License as published by the
-*     Free Software Foundation; either version 2 of the License, or (at your
-*     option) any later version.
-*
-*
-*     XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS" AS A
-*     COURTESY TO YOU. BY PROVIDING THIS DESIGN, CODE, OR INFORMATION AS
-*     ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE, APPLICATION OR STANDARD,
-*     XILINX IS MAKING NO REPRESENTATION THAT THIS IMPLEMENTATION IS FREE
-*     FROM ANY CLAIMS OF INFRINGEMENT, AND YOU ARE RESPONSIBLE FOR OBTAINING
-*     ANY THIRD PARTY RIGHTS YOU MAY REQUIRE FOR YOUR IMPLEMENTATION.
-*     XILINX EXPRESSLY DISCLAIMS ANY WARRANTY WHATSOEVER WITH RESPECT TO
-*     THE ADEQUACY OF THE IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY
-*     WARRANTIES OR REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM
-*     CLAIMS OF INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND
-*     FITNESS FOR A PARTICULAR PURPOSE.
-*
-*
-*     Xilinx hardware products are not intended for use in life support
-*     appliances, devices, or systems. Use in such applications is
-*     expressly prohibited.
-*
-*
-*     (c) Copyright 2002-2004 Xilinx Inc.
-*     All rights reserved.
-*
-*
-*     You should have received a copy of the GNU General Public License along
-*     with this program; if not, write to the Free Software Foundation, Inc.,
-*     675 Mass Ave, Cambridge, MA 02139, USA.
-*
-******************************************************************************/
-/*****************************************************************************
-*
-* This file contains the implementation of the XVersion component. This
-* component represents a version ID.  It is encapsulated within a component
-* so that it's type and implementation can change without affecting users of
-* it.
-*
-* The version is formatted as X.YYZ where X = 0 - 9, Y = 00 - 99, Z = a - z
-* X is the major revision, YY is the minor revision, and Z is the
-* compatability revision.
-*
-* Packed versions are also utilized for the configuration ROM such that
-* memory is minimized. A packed version consumes only 16 bits and is
-* formatted as follows.
-*
-* <pre>
-* Revision                  Range       Bit Positions
-*
-* Major Revision            0 - 9       Bits 15 - 12
-* Minor Revision            0 - 99      Bits 11 - 5
-* Compatability Revision    a - z       Bits 4 - 0
-</pre>
-*
-******************************************************************************/
-
-/***************************** Include Files *********************************/
-
-#include "xbasic_types.h"
-#include "xversion.h"
-
-/************************** Constant Definitions *****************************/
-
-/* the following constants define the masks and shift values to allow the
- * revisions to be packed and unpacked, a packed version is packed into a 16
- * bit value in the following format, XXXXYYYYYYYZZZZZ, where XXXX is the
- * major revision, YYYYYYY is the minor revision, and ZZZZZ is the compatability
- * revision
- */
-#define XVE_MAJOR_SHIFT_VALUE       12
-#define XVE_MINOR_ONLY_MASK         0x0FE0
-#define XVE_MINOR_SHIFT_VALUE       5
-#define XVE_COMP_ONLY_MASK          0x001F
-
-/* the following constants define the specific characters of a version string
- * for each character of the revision, a version string is in the following
- * format, "X.YYZ" where X is the major revision (0 - 9), YY is the minor
- * revision (00 - 99), and Z is the compatability revision (a - z)
- */
-#define XVE_MAJOR_CHAR      0	/* major revision 0 - 9 */
-#define XVE_MINOR_TENS_CHAR 2	/* minor revision tens 0 - 9 */
-#define XVE_MINOR_ONES_CHAR 3	/* minor revision ones 0 - 9 */
-#define XVE_COMP_CHAR       4	/* compatability revision a - z */
-#define XVE_END_STRING_CHAR 5
-
-/**************************** Type Definitions *******************************/
-
-/***************** Macros (Inline Functions) Definitions *********************/
-
-/************************** Function Prototypes ******************************/
-
-static u32 IsVersionStringValid(s8 * StringPtr);
-
-/*****************************************************************************
-*
-* Unpacks a packed version into the specified version. Versions are packed
-* into the configuration ROM to reduce the amount storage. A packed version
-* is a binary format as oppossed to a non-packed version which is implemented
-* as a string.
-*
-* @param    InstancePtr points to the version to unpack the packed version into.
-* @param    PackedVersion contains the packed version to unpack.
-*
-* @return
-*
-* None.
-*
-* @note
-*
-* None.
-*
-******************************************************************************/
-void
-XVersion_UnPack(XVersion * InstancePtr, u16 PackedVersion)
-{
-	/* not implemented yet since CROM related */
-}
-
-/*****************************************************************************
-*
-* Packs a version into the specified packed version. Versions are packed into
-* the configuration ROM to reduce the amount storage.
-*
-* @param    InstancePtr points to the version to pack.
-* @param    PackedVersionPtr points to the packed version which will receive
-*           the new packed version.
-*
-* @return
-*
-* A status, XST_SUCCESS, indicating the packing was accomplished
-* successfully, or an error, XST_INVALID_VERSION, indicating the specified
-* input version was not valid such that the pack did not occur
-* <br><br>
-* The packed version pointed to by PackedVersionPtr is modified with the new
-* packed version if the status indicates success.
-*
-* @note
-*
-* None.
-*
-******************************************************************************/
-XStatus
-XVersion_Pack(XVersion * InstancePtr, u16 * PackedVersionPtr)
-{
-	/* not implemented yet since CROM related */
-
-	return XST_SUCCESS;
-}
-
-/*****************************************************************************
-*
-* Determines if two versions are equal.
-*
-* @param    InstancePtr points to the first version to be compared.
-* @param    VersionPtr points to a second version to be compared.
-*
-* @return
-*
-* TRUE if the versions are equal, FALSE otherwise.
-*
-* @note
-*
-* None.
-*
-******************************************************************************/
-u32
-XVersion_IsEqual(XVersion * InstancePtr, XVersion * VersionPtr)
-{
-	u8 *Version1 = (u8 *) InstancePtr;
-	u8 *Version2 = (u8 *) VersionPtr;
-	int Index;
-
-	/* assert to verify input arguments */
-
-	XASSERT_NONVOID(InstancePtr != NULL);
-	XASSERT_NONVOID(VersionPtr != NULL);
-
-	/* check each byte of the versions to see if they are the same,
-	 * return at any point a byte differs between them
-	 */
-	for (Index = 0; Index < sizeof (XVersion); Index++) {
-		if (Version1[Index] != Version2[Index]) {
-			return FALSE;
-		}
-	}
-
-	/* No byte was found to be different between the versions, so indicate
-	 * the versions are equal
-	 */
-	return TRUE;
-}
-
-/*****************************************************************************
-*
-* Converts a version to a null terminated string.
-*
-* @param    InstancePtr points to the version to convert.
-* @param    StringPtr points to the string which will be the result of the
-*           conversion. This does not need to point to a null terminated
-*           string as an input, but must point to storage which is an adequate
-*           amount to hold the result string.
-*
-* @return
-*
-* The null terminated string is inserted at the location pointed to by
-* StringPtr if the status indicates success.
-*
-* @note
-*
-* It is necessary for the caller to have already allocated the storage to
-* contain the string.  The amount of memory necessary for the string is
-* specified in the version header file.
-*
-******************************************************************************/
-void
-XVersion_ToString(XVersion * InstancePtr, s8 * StringPtr)
-{
-	/* assert to verify input arguments */
-
-	XASSERT_VOID(InstancePtr != NULL);
-	XASSERT_VOID(StringPtr != NULL);
-
-	/* since version is implemented as a string, just copy the specified
-	 * input into the specified output
-	 */
-	XVersion_Copy(InstancePtr, (XVersion *) StringPtr);
-}
-
-/*****************************************************************************
-*
-* Initializes a version from a null terminated string. Since the string may not
-* be a format which is compatible with the version, an error could occur.
-*
-* @param    InstancePtr points to the version which is to be initialized.
-* @param    StringPtr points to a null terminated string which will be
-*           converted to a version.  The format of the string must match the
-*           version string format which is X.YYX where X = 0 - 9, YY = 00 - 99,
-*           Z = a - z.
-*
-* @return
-*
-* A status, XST_SUCCESS, indicating the conversion was accomplished
-* successfully, or XST_INVALID_VERSION indicating the version string format
-* was not valid.
-*
-* @note
-*
-* None.
-*
-******************************************************************************/
-XStatus
-XVersion_FromString(XVersion * InstancePtr, s8 * StringPtr)
-{
-	/* assert to verify input arguments */
-
-	XASSERT_NONVOID(InstancePtr != NULL);
-	XASSERT_NONVOID(StringPtr != NULL);
-
-	/* if the version string specified is not valid, return an error */
-
-	if (!IsVersionStringValid(StringPtr)) {
-		return XST_INVALID_VERSION;
-	}
-
-	/* copy the specified string into the specified version and indicate the
-	 * conversion was successful
-	 */
-	XVersion_Copy((XVersion *) StringPtr, InstancePtr);
-
-	return XST_SUCCESS;
-}
-
-/*****************************************************************************
-*
-* Copies the contents of a version to another version.
-*
-* @param    InstancePtr points to the version which is the source of data for
-*           the copy operation.
-* @param    VersionPtr points to another version which is the destination of
-*           the copy operation.
-*
-* @return
-*
-* None.
-*
-* @note
-*
-* None.
-*
-******************************************************************************/
-void
-XVersion_Copy(XVersion * InstancePtr, XVersion * VersionPtr)
-{
-	u8 *Source = (u8 *) InstancePtr;
-	u8 *Destination = (u8 *) VersionPtr;
-	int Index;
-
-	/* assert to verify input arguments */
-
-	XASSERT_VOID(InstancePtr != NULL);
-	XASSERT_VOID(VersionPtr != NULL);
-
-	/* copy each byte of the source version to the destination version */
-
-	for (Index = 0; Index < sizeof (XVersion); Index++) {
-		Destination[Index] = Source[Index];
-	}
-}
-
-/*****************************************************************************
-*
-* Determines if the specified version is valid.
-*
-* @param    StringPtr points to the string to be validated.
-*
-* @return
-*
-* TRUE if the version string is a valid format, FALSE otherwise.
-*
-* @note
-*
-* None.
-*
-******************************************************************************/
-static u32
-IsVersionStringValid(s8 * StringPtr)
-{
-	/* if the input string is not a valid format, "X.YYZ" where X = 0 - 9,
-	 * YY = 00 - 99, and Z = a - z, then indicate it's not valid
-	 */
-	if ((StringPtr[XVE_MAJOR_CHAR] < '0') ||
-	    (StringPtr[XVE_MAJOR_CHAR] > '9') ||
-	    (StringPtr[XVE_MINOR_TENS_CHAR] < '0') ||
-	    (StringPtr[XVE_MINOR_TENS_CHAR] > '9') ||
-	    (StringPtr[XVE_MINOR_ONES_CHAR] < '0') ||
-	    (StringPtr[XVE_MINOR_ONES_CHAR] > '9') ||
-	    (StringPtr[XVE_COMP_CHAR] < 'a') ||
-	    (StringPtr[XVE_COMP_CHAR] > 'z')) {
-		return FALSE;
-	}
-
-	return TRUE;
-}
diff --git a/board/xilinx/common/xversion.h b/board/xilinx/common/xversion.h
deleted file mode 100644
index 17f9da7..0000000
--- a/board/xilinx/common/xversion.h
+++ /dev/null
@@ -1,97 +0,0 @@
-/******************************************************************************
-*
-*     Author: Xilinx, Inc.
-*
-*
-*     This program is free software; you can redistribute it and/or modify it
-*     under the terms of the GNU General Public License as published by the
-*     Free Software Foundation; either version 2 of the License, or (at your
-*     option) any later version.
-*
-*
-*     XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS" AS A
-*     COURTESY TO YOU. BY PROVIDING THIS DESIGN, CODE, OR INFORMATION AS
-*     ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE, APPLICATION OR STANDARD,
-*     XILINX IS MAKING NO REPRESENTATION THAT THIS IMPLEMENTATION IS FREE
-*     FROM ANY CLAIMS OF INFRINGEMENT, AND YOU ARE RESPONSIBLE FOR OBTAINING
-*     ANY THIRD PARTY RIGHTS YOU MAY REQUIRE FOR YOUR IMPLEMENTATION.
-*     XILINX EXPRESSLY DISCLAIMS ANY WARRANTY WHATSOEVER WITH RESPECT TO
-*     THE ADEQUACY OF THE IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY
-*     WARRANTIES OR REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM
-*     CLAIMS OF INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND
-*     FITNESS FOR A PARTICULAR PURPOSE.
-*
-*
-*     Xilinx hardware products are not intended for use in life support
-*     appliances, devices, or systems. Use in such applications is
-*     expressly prohibited.
-*
-*
-*     (c) Copyright 2002-2004 Xilinx Inc.
-*     All rights reserved.
-*
-*
-*     You should have received a copy of the GNU General Public License along
-*     with this program; if not, write to the Free Software Foundation, Inc.,
-*     675 Mass Ave, Cambridge, MA 02139, USA.
-*
-******************************************************************************/
-/*****************************************************************************
-*
-* This file contains the interface for the XVersion component. This
-* component represents a version ID.  It is encapsulated within a component
-* so that it's type and implementation can change without affecting users of
-* it.
-*
-* The version is formatted as X.YYZ where X = 0 - 9, Y = 00 - 99, Z = a - z
-* X is the major revision, YY is the minor revision, and Z is the
-* compatability revision.
-*
-* Packed versions are also utilized for the configuration ROM such that
-* memory is minimized. A packed version consumes only 16 bits and is
-* formatted as follows.
-*
-* <pre>
-* Revision                  Range       Bit Positions
-*
-* Major Revision            0 - 9       Bits 15 - 12
-* Minor Revision            0 - 99      Bits 11 - 5
-* Compatability Revision    a - z       Bits 4 - 0
-* </pre>
-*
-******************************************************************************/
-
-#ifndef XVERSION_H		/* prevent circular inclusions */
-#define XVERSION_H		/* by using protection macros */
-
-/***************************** Include Files *********************************/
-
-#include "xbasic_types.h"
-#include "xstatus.h"
-
-/************************** Constant Definitions *****************************/
-
-/**************************** Type Definitions *******************************/
-
-/* the following data type is used to hold a null terminated version string
- * consisting of the following format, "X.YYX"
- */
-typedef s8 XVersion[6];
-
-/***************** Macros (Inline Functions) Definitions *********************/
-
-/************************** Function Prototypes ******************************/
-
-void XVersion_UnPack(XVersion * InstancePtr, u16 PackedVersion);
-
-XStatus XVersion_Pack(XVersion * InstancePtr, u16 * PackedVersion);
-
-u32 XVersion_IsEqual(XVersion * InstancePtr, XVersion * VersionPtr);
-
-void XVersion_ToString(XVersion * InstancePtr, s8 * StringPtr);
-
-XStatus XVersion_FromString(XVersion * InstancePtr, s8 * StringPtr);
-
-void XVersion_Copy(XVersion * InstancePtr, XVersion * VersionPtr);
-
-#endif				/* end of protection macro */
diff --git a/board/xilinx/microblaze-generic/microblaze-generic.c b/board/xilinx/microblaze-generic/microblaze-generic.c
index b75e62c..70f94c1 100644
--- a/board/xilinx/microblaze-generic/microblaze-generic.c
+++ b/board/xilinx/microblaze-generic/microblaze-generic.c
@@ -53,29 +53,9 @@ int gpio_init (void)
 	return 0;
 }
 
-#ifdef CONFIG_SYS_FSL_2
-void fsl_isr2 (void *arg) {
-	volatile int num;
-	*((unsigned int *)(CONFIG_SYS_GPIO_0_ADDR + 0x4)) =
-	    ++(*((unsigned int *)(CONFIG_SYS_GPIO_0_ADDR + 0x4)));
-	GET (num, 2);
-	NGET (num, 2);
-	puts("*");
-}
-
-int fsl_init2 (void) {
-	puts("fsl_init2\n");
-	install_interrupt_handler (FSL_INTR_2, fsl_isr2, NULL);
-	return 0;
-}
-#endif
-
 void board_init(void)
 {
 	gpio_init();
-#ifdef CONFIG_SYS_FSL_2
-	fsl_init2();
-#endif
 }
 
 int board_eth_init(bd_t *bis)
diff --git a/board/xilinx/xilinx_iic/xiic_l.c b/board/xilinx/xilinx_iic/xiic_l.c
deleted file mode 100644
index 6b78163..0000000
--- a/board/xilinx/xilinx_iic/xiic_l.c
+++ /dev/null
@@ -1,484 +0,0 @@
-/* $Id: xiic_l.c,v 1.2 2002/12/05 19:32:40 meinelte Exp $ */
-/******************************************************************************
-*
-*	XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS"
-*	AS A COURTESY TO YOU, SOLELY FOR USE IN DEVELOPING PROGRAMS AND
-*	SOLUTIONS FOR XILINX DEVICES.  BY PROVIDING THIS DESIGN, CODE,
-*	OR INFORMATION AS ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE,
-*	APPLICATION OR STANDARD, XILINX IS MAKING NO REPRESENTATION
-*	THAT THIS IMPLEMENTATION IS FREE FROM ANY CLAIMS OF INFRINGEMENT,
-*	AND YOU ARE RESPONSIBLE FOR OBTAINING ANY RIGHTS YOU MAY REQUIRE
-*	FOR YOUR IMPLEMENTATION.  XILINX EXPRESSLY DISCLAIMS ANY
-*	WARRANTY WHATSOEVER WITH RESPECT TO THE ADEQUACY OF THE
-*	IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY WARRANTIES OR
-*	REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM CLAIMS OF
-*	INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
-*	FOR A PARTICULAR PURPOSE.
-*
-*	(c) Copyright 2002 Xilinx Inc.
-*	All rights reserved.
-*
-******************************************************************************/
-/*****************************************************************************/
-/**
-*
-* @file xiic_l.c
-*
-* This file contains low-level driver functions that can be used to access the
-* device.  The user should refer to the hardware device specification for more
-* details of the device operation.
-*
-* <pre>
-* MODIFICATION HISTORY:
-*
-* Ver	Who  Date     Changes
-* ----- --- -------  -----------------------------------------------
-* 1.01b jhl 5/13/02  First release
-* 1.01b jhl 10/14/02 Corrected bug in the receive function, the setup of the
-*		     interrupt status mask was not being done in the loop such
-*		     that a read would sometimes fail on the last byte because
-*		     the transmit error which should have been ignored was
-*		     being used.  This would leave an extra byte in the FIFO
-*		     and the bus throttled such that the next operation would
-*		     also fail.	 Also updated the receive function to not
-*		     disable the device after the last byte until after the
-*		     bus transitions to not busy which is more consistent
-*		     with the expected behavior.
-* 1.01c ecm 12/05/02 new rev
-* </pre>
-*
-****************************************************************************/
-
-/***************************** Include Files *******************************/
-
-#include "xbasic_types.h"
-#include "xio.h"
-#include "xipif_v1_23_b.h"
-#include "xiic_l.h"
-
-/************************** Constant Definitions ***************************/
-
-/**************************** Type Definitions *****************************/
-
-
-/***************** Macros (Inline Functions) Definitions *******************/
-
-
-/******************************************************************************
-*
-* This macro clears the specified interrupt in the IPIF interrupt status
-* register.  It is non-destructive in that the register is read and only the
-* interrupt specified is cleared.  Clearing an interrupt acknowledges it.
-*
-* @param    BaseAddress contains the IPIF registers base address.
-*
-* @param    InterruptMask contains the interrupts to be disabled
-*
-* @return
-*
-* None.
-*
-* @note
-*
-* Signature: void XIic_mClearIisr(u32 BaseAddress,
-*				  u32 InterruptMask);
-*
-******************************************************************************/
-#define XIic_mClearIisr(BaseAddress, InterruptMask)		    \
-    XIIF_V123B_WRITE_IISR((BaseAddress),			    \
-	XIIF_V123B_READ_IISR(BaseAddress) & (InterruptMask))
-
-/******************************************************************************
-*
-* This macro sends the address for a 7 bit address during both read and write
-* operations. It takes care of the details to format the address correctly.
-* This macro is designed to be called internally to the drivers.
-*
-* @param    SlaveAddress contains the address of the slave to send to.
-*
-* @param    Operation indicates XIIC_READ_OPERATION or XIIC_WRITE_OPERATION
-*
-* @return
-*
-* None.
-*
-* @note
-*
-* Signature: void XIic_mSend7BitAddr(u16 SlaveAddress, u8 Operation);
-*
-******************************************************************************/
-#define XIic_mSend7BitAddress(BaseAddress, SlaveAddress, Operation)	    \
-{									    \
-    u8 LocalAddr = (u8)(SlaveAddress << 1);			    \
-    LocalAddr = (LocalAddr & 0xFE) | (Operation);			    \
-    XIo_Out8(BaseAddress + XIIC_DTR_REG_OFFSET, LocalAddr);		    \
-}
-
-/************************** Function Prototypes ****************************/
-
-static unsigned RecvData (u32 BaseAddress, u8 * BufferPtr,
-			  unsigned ByteCount);
-static unsigned SendData (u32 BaseAddress, u8 * BufferPtr,
-			  unsigned ByteCount);
-
-/************************** Variable Definitions **************************/
-
-
-/****************************************************************************/
-/**
-* Receive data as a master on the IIC bus.  This function receives the data
-* using polled I/O and blocks until the data has been received.	 It only
-* supports 7 bit addressing and non-repeated start modes of operation.	The
-* user is responsible for ensuring the bus is not busy if multiple masters
-* are present on the bus.
-*
-* @param    BaseAddress contains the base address of the IIC device.
-* @param    Address contains the 7 bit IIC address of the device to send the
-*	    specified data to.
-* @param    BufferPtr points to the data to be sent.
-* @param    ByteCount is the number of bytes to be sent.
-*
-* @return
-*
-* The number of bytes received.
-*
-* @note
-*
-* None
-*
-******************************************************************************/
-unsigned XIic_Recv (u32 BaseAddress, u8 Address,
-		    u8 * BufferPtr, unsigned ByteCount)
-{
-	u8 CntlReg;
-	unsigned RemainingByteCount;
-
-	/* Tx error is enabled incase the address (7 or 10) has no device to answer
-	 * with Ack. When only one byte of data, must set NO ACK before address goes
-	 * out therefore Tx error must not be enabled as it will go off immediately
-	 * and the Rx full interrupt will be checked.  If full, then the one byte
-	 * was received and the Tx error will be disabled without sending an error
-	 * callback msg.
-	 */
-	XIic_mClearIisr (BaseAddress,
-			 XIIC_INTR_RX_FULL_MASK | XIIC_INTR_TX_ERROR_MASK |
-			 XIIC_INTR_ARB_LOST_MASK);
-
-	/* Set receive FIFO occupancy depth for 1 byte (zero based)
-	 */
-	XIo_Out8 (BaseAddress + XIIC_RFD_REG_OFFSET, 0);
-
-	/* 7 bit slave address, send the address for a read operation
-	 * and set the state to indicate the address has been sent
-	 */
-	XIic_mSend7BitAddress (BaseAddress, Address, XIIC_READ_OPERATION);
-
-	/* MSMS gets set after putting data in FIFO. Start the master receive
-	 * operation by setting CR Bits MSMS to Master, if the buffer is only one
-	 * byte, then it should not be acknowledged to indicate the end of data
-	 */
-	CntlReg = XIIC_CR_MSMS_MASK | XIIC_CR_ENABLE_DEVICE_MASK;
-	if (ByteCount == 1) {
-		CntlReg |= XIIC_CR_NO_ACK_MASK;
-	}
-
-	/* Write out the control register to start receiving data and call the
-	 * function to receive each byte into the buffer
-	 */
-	XIo_Out8 (BaseAddress + XIIC_CR_REG_OFFSET, CntlReg);
-
-	/* Clear the latched interrupt status for the bus not busy bit which must
-	 * be done while the bus is busy
-	 */
-	XIic_mClearIisr (BaseAddress, XIIC_INTR_BNB_MASK);
-
-	/* Try to receive the data from the IIC bus */
-
-	RemainingByteCount = RecvData (BaseAddress, BufferPtr, ByteCount);
-	/*
-	 * The receive is complete, disable the IIC device and return the number of
-	 * bytes that was received
-	 */
-	XIo_Out8 (BaseAddress + XIIC_CR_REG_OFFSET, 0);
-
-	/* Return the number of bytes that was received */
-
-	return ByteCount - RemainingByteCount;
-}
-
-/******************************************************************************
-*
-* Receive the specified data from the device that has been previously addressed
-* on the IIC bus.  This function assumes that the 7 bit address has been sent
-* and it should wait for the transmit of the address to complete.
-*
-* @param    BaseAddress contains the base address of the IIC device.
-* @param    BufferPtr points to the buffer to hold the data that is received.
-* @param    ByteCount is the number of bytes to be received.
-*
-* @return
-*
-* The number of bytes remaining to be received.
-*
-* @note
-*
-* This function does not take advantage of the receive FIFO because it is
-* designed for minimal code space and complexity.  It contains loops that
-* that could cause the function not to return if the hardware is not working.
-*
-* This function assumes that the calling function will disable the IIC device
-* after this function returns.
-*
-******************************************************************************/
-static unsigned RecvData (u32 BaseAddress, u8 * BufferPtr, unsigned ByteCount)
-{
-	u8 CntlReg;
-	u32 IntrStatusMask;
-	u32 IntrStatus;
-
-	/* Attempt to receive the specified number of bytes on the IIC bus */
-
-	while (ByteCount > 0) {
-		/* Setup the mask to use for checking errors because when receiving one
-		 * byte OR the last byte of a multibyte message an error naturally
-		 * occurs when the no ack is done to tell the slave the last byte
-		 */
-		if (ByteCount == 1) {
-			IntrStatusMask =
-				XIIC_INTR_ARB_LOST_MASK | XIIC_INTR_BNB_MASK;
-		} else {
-			IntrStatusMask =
-				XIIC_INTR_ARB_LOST_MASK |
-				XIIC_INTR_TX_ERROR_MASK | XIIC_INTR_BNB_MASK;
-		}
-
-		/* Wait for the previous transmit and the 1st receive to complete
-		 * by checking the interrupt status register of the IPIF
-		 */
-		while (1) {
-			IntrStatus = XIIF_V123B_READ_IISR (BaseAddress);
-			if (IntrStatus & XIIC_INTR_RX_FULL_MASK) {
-				break;
-			}
-			/* Check the transmit error after the receive full because when
-			 * sending only one byte transmit error will occur because of the
-			 * no ack to indicate the end of the data
-			 */
-			if (IntrStatus & IntrStatusMask) {
-				return ByteCount;
-			}
-		}
-
-		CntlReg = XIo_In8 (BaseAddress + XIIC_CR_REG_OFFSET);
-
-		/* Special conditions exist for the last two bytes so check for them
-		 * Note that the control register must be setup for these conditions
-		 * before the data byte which was already received is read from the
-		 * receive FIFO (while the bus is throttled
-		 */
-		if (ByteCount == 1) {
-			/* For the last data byte, it has already been read and no ack
-			 * has been done, so clear MSMS while leaving the device enabled
-			 * so it can get off the IIC bus appropriately with a stop.
-			 */
-			XIo_Out8 (BaseAddress + XIIC_CR_REG_OFFSET,
-				  XIIC_CR_ENABLE_DEVICE_MASK);
-		}
-
-		/* Before the last byte is received, set NOACK to tell the slave IIC
-		 * device that it is the end, this must be done before reading the byte
-		 * from the FIFO
-		 */
-		if (ByteCount == 2) {
-			/* Write control reg with NO ACK allowing last byte to
-			 * have the No ack set to indicate to slave last byte read.
-			 */
-			XIo_Out8 (BaseAddress + XIIC_CR_REG_OFFSET,
-				  CntlReg | XIIC_CR_NO_ACK_MASK);
-		}
-
-		/* Read in data from the FIFO and unthrottle the bus such that the
-		 * next byte is read from the IIC bus
-		 */
-		*BufferPtr++ = XIo_In8 (BaseAddress + XIIC_DRR_REG_OFFSET);
-
-		/* Clear the latched interrupt status so that it will be updated with
-		 * the new state when it changes, this must be done after the receive
-		 * register is read
-		 */
-		XIic_mClearIisr (BaseAddress, XIIC_INTR_RX_FULL_MASK |
-				 XIIC_INTR_TX_ERROR_MASK |
-				 XIIC_INTR_ARB_LOST_MASK);
-		ByteCount--;
-	}
-
-	/* Wait for the bus to transition to not busy before returning, the IIC
-	 * device cannot be disabled until this occurs.	 It should transition as
-	 * the MSMS bit of the control register was cleared before the last byte
-	 * was read from the FIFO.
-	 */
-	while (1) {
-		if (XIIF_V123B_READ_IISR (BaseAddress) & XIIC_INTR_BNB_MASK) {
-			break;
-		}
-	}
-
-	return ByteCount;
-}
-
-/****************************************************************************/
-/**
-* Send data as a master on the IIC bus.	 This function sends the data
-* using polled I/O and blocks until the data has been sent.  It only supports
-* 7 bit addressing and non-repeated start modes of operation.  The user is
-* responsible for ensuring the bus is not busy if multiple masters are present
-* on the bus.
-*
-* @param    BaseAddress contains the base address of the IIC device.
-* @param    Address contains the 7 bit IIC address of the device to send the
-*	    specified data to.
-* @param    BufferPtr points to the data to be sent.
-* @param    ByteCount is the number of bytes to be sent.
-*
-* @return
-*
-* The number of bytes sent.
-*
-* @note
-*
-* None
-*
-******************************************************************************/
-unsigned XIic_Send (u32 BaseAddress, u8 Address,
-		    u8 * BufferPtr, unsigned ByteCount)
-{
-	unsigned RemainingByteCount;
-
-	/* Put the address into the FIFO to be sent and indicate that the operation
-	 * to be performed on the bus is a write operation
-	 */
-	XIic_mSend7BitAddress (BaseAddress, Address, XIIC_WRITE_OPERATION);
-
-	/* Clear the latched interrupt status so that it will be updated with the
-	 * new state when it changes, this must be done after the address is put
-	 * in the FIFO
-	 */
-	XIic_mClearIisr (BaseAddress, XIIC_INTR_TX_EMPTY_MASK |
-			 XIIC_INTR_TX_ERROR_MASK | XIIC_INTR_ARB_LOST_MASK);
-
-	/* MSMS must be set after putting data into transmit FIFO, indicate the
-	 * direction is transmit, this device is master and enable the IIC device
-	 */
-	XIo_Out8 (BaseAddress + XIIC_CR_REG_OFFSET,
-		  XIIC_CR_MSMS_MASK | XIIC_CR_DIR_IS_TX_MASK |
-		  XIIC_CR_ENABLE_DEVICE_MASK);
-
-	/* Clear the latched interrupt
-	 * status for the bus not busy bit which must be done while the bus is busy
-	 */
-	XIic_mClearIisr (BaseAddress, XIIC_INTR_BNB_MASK);
-
-	/* Send the specified data to the device on the IIC bus specified by the
-	 * the address
-	 */
-	RemainingByteCount = SendData (BaseAddress, BufferPtr, ByteCount);
-
-	/*
-	 * The send is complete, disable the IIC device and return the number of
-	 * bytes that was sent
-	 */
-	XIo_Out8 (BaseAddress + XIIC_CR_REG_OFFSET, 0);
-
-	return ByteCount - RemainingByteCount;
-}
-
-/******************************************************************************
-*
-* Send the specified buffer to the device that has been previously addressed
-* on the IIC bus.  This function assumes that the 7 bit address has been sent
-* and it should wait for the transmit of the address to complete.
-*
-* @param    BaseAddress contains the base address of the IIC device.
-* @param    BufferPtr points to the data to be sent.
-* @param    ByteCount is the number of bytes to be sent.
-*
-* @return
-*
-* The number of bytes remaining to be sent.
-*
-* @note
-*
-* This function does not take advantage of the transmit FIFO because it is
-* designed for minimal code space and complexity.  It contains loops that
-* that could cause the function not to return if the hardware is not working.
-*
-******************************************************************************/
-static unsigned SendData (u32 BaseAddress, u8 * BufferPtr, unsigned ByteCount)
-{
-	u32 IntrStatus;
-
-	/* Send the specified number of bytes in the specified buffer by polling
-	 * the device registers and blocking until complete
-	 */
-	while (ByteCount > 0) {
-		/* Wait for the transmit to be empty before sending any more data
-		 * by polling the interrupt status register
-		 */
-		while (1) {
-			IntrStatus = XIIF_V123B_READ_IISR (BaseAddress);
-
-			if (IntrStatus & (XIIC_INTR_TX_ERROR_MASK |
-					  XIIC_INTR_ARB_LOST_MASK |
-					  XIIC_INTR_BNB_MASK)) {
-				return ByteCount;
-			}
-
-			if (IntrStatus & XIIC_INTR_TX_EMPTY_MASK) {
-				break;
-			}
-		}
-		/* If there is more than one byte to send then put the next byte to send
-		 * into the transmit FIFO
-		 */
-		if (ByteCount > 1) {
-			XIo_Out8 (BaseAddress + XIIC_DTR_REG_OFFSET,
-				  *BufferPtr++);
-		} else {
-			/* Set the stop condition before sending the last byte of data so that
-			 * the stop condition will be generated immediately following the data
-			 * This is done by clearing the MSMS bit in the control register.
-			 */
-			XIo_Out8 (BaseAddress + XIIC_CR_REG_OFFSET,
-				  XIIC_CR_ENABLE_DEVICE_MASK |
-				  XIIC_CR_DIR_IS_TX_MASK);
-
-			/* Put the last byte to send in the transmit FIFO */
-
-			XIo_Out8 (BaseAddress + XIIC_DTR_REG_OFFSET,
-				  *BufferPtr++);
-		}
-
-		/* Clear the latched interrupt status register and this must be done after
-		 * the transmit FIFO has been written to or it won't clear
-		 */
-		XIic_mClearIisr (BaseAddress, XIIC_INTR_TX_EMPTY_MASK);
-
-		/* Update the byte count to reflect the byte sent and clear the latched
-		 * interrupt status so it will be updated for the new state
-		 */
-		ByteCount--;
-	}
-
-	/* Wait for the bus to transition to not busy before returning, the IIC
-	 * device cannot be disabled until this occurs.
-	 * Note that this is different from a receive operation because the stop
-	 * condition causes the bus to go not busy.
-	 */
-	while (1) {
-		if (XIIF_V123B_READ_IISR (BaseAddress) & XIIC_INTR_BNB_MASK) {
-			break;
-		}
-	}
-
-	return ByteCount;
-}
diff --git a/board/xilinx/xilinx_iic/xiic_l.h b/board/xilinx/xilinx_iic/xiic_l.h
deleted file mode 100644
index a2c4c49..0000000
--- a/board/xilinx/xilinx_iic/xiic_l.h
+++ /dev/null
@@ -1,150 +0,0 @@
-/* $Id: xiic_l.h,v 1.2 2002/12/05 19:32:40 meinelte Exp $ */
-/*****************************************************************************
-*
-*	XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS"
-*	AS A COURTESY TO YOU, SOLELY FOR USE IN DEVELOPING PROGRAMS AND
-*	SOLUTIONS FOR XILINX DEVICES.  BY PROVIDING THIS DESIGN, CODE,
-*	OR INFORMATION AS ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE,
-*	APPLICATION OR STANDARD, XILINX IS MAKING NO REPRESENTATION
-*	THAT THIS IMPLEMENTATION IS FREE FROM ANY CLAIMS OF INFRINGEMENT,
-*	AND YOU ARE RESPONSIBLE FOR OBTAINING ANY RIGHTS YOU MAY REQUIRE
-*	FOR YOUR IMPLEMENTATION.  XILINX EXPRESSLY DISCLAIMS ANY
-*	WARRANTY WHATSOEVER WITH RESPECT TO THE ADEQUACY OF THE
-*	IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY WARRANTIES OR
-*	REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM CLAIMS OF
-*	INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
-*	FOR A PARTICULAR PURPOSE.
-*
-*	(c) Copyright 2002 Xilinx Inc.
-*	All rights reserved.
-*
-*****************************************************************************/
-/****************************************************************************/
-/**
-*
-* @file xiic_l.h
-*
-* This header file contains identifiers and low-level driver functions (or
-* macros) that can be used to access the device.  High-level driver functions
-* are defined in xiic.h.
-*
-* <pre>
-* MODIFICATION HISTORY:
-*
-* Ver	Who  Date     Changes
-* ----- ---- -------- -----------------------------------------------
-* 1.00b jhl  05/07/02 First release
-* 1.01c ecm  12/05/02 new rev
-* </pre>
-*
-*****************************************************************************/
-
-#ifndef XIIC_L_H /* prevent circular inclusions */
-#define XIIC_L_H /* by using protection macros */
-
-/***************************** Include Files ********************************/
-
-#include "xbasic_types.h"
-
-/************************** Constant Definitions ****************************/
-
-#define XIIC_MSB_OFFSET		       3
-
-#define XIIC_REG_OFFSET 0x100 + XIIC_MSB_OFFSET
-
-/*
- * Register offsets in bytes from RegisterBase. Three is added to the
- * base offset to access LSB (IBM style) of the word
- */
-#define XIIC_CR_REG_OFFSET   0x00+XIIC_REG_OFFSET   /* Control Register	  */
-#define XIIC_SR_REG_OFFSET   0x04+XIIC_REG_OFFSET   /* Status Register	  */
-#define XIIC_DTR_REG_OFFSET  0x08+XIIC_REG_OFFSET   /* Data Tx Register	  */
-#define XIIC_DRR_REG_OFFSET  0x0C+XIIC_REG_OFFSET   /* Data Rx Register	  */
-#define XIIC_ADR_REG_OFFSET  0x10+XIIC_REG_OFFSET   /* Address Register	  */
-#define XIIC_TFO_REG_OFFSET  0x14+XIIC_REG_OFFSET   /* Tx FIFO Occupancy  */
-#define XIIC_RFO_REG_OFFSET  0x18+XIIC_REG_OFFSET   /* Rx FIFO Occupancy  */
-#define XIIC_TBA_REG_OFFSET  0x1C+XIIC_REG_OFFSET   /* 10 Bit Address reg */
-#define XIIC_RFD_REG_OFFSET  0x20+XIIC_REG_OFFSET   /* Rx FIFO Depth reg  */
-
-/* Control Register masks */
-
-#define XIIC_CR_ENABLE_DEVICE_MASK	  0x01	/* Device enable = 1	  */
-#define XIIC_CR_TX_FIFO_RESET_MASK	  0x02	/* Transmit FIFO reset=1  */
-#define XIIC_CR_MSMS_MASK		  0x04	/* Master starts Txing=1  */
-#define XIIC_CR_DIR_IS_TX_MASK		  0x08	/* Dir of tx. Txing=1	  */
-#define XIIC_CR_NO_ACK_MASK		  0x10	/* Tx Ack. NO ack = 1	  */
-#define XIIC_CR_REPEATED_START_MASK	  0x20	/* Repeated start = 1	  */
-#define XIIC_CR_GENERAL_CALL_MASK	  0x40	/* Gen Call enabled = 1	  */
-
-/* Status Register masks */
-
-#define XIIC_SR_GEN_CALL_MASK		  0x01	/* 1=a mstr issued a GC	  */
-#define XIIC_SR_ADDR_AS_SLAVE_MASK	  0x02	/* 1=when addr as slave	  */
-#define XIIC_SR_BUS_BUSY_MASK		  0x04	/* 1 = bus is busy	  */
-#define XIIC_SR_MSTR_RDING_SLAVE_MASK	  0x08	/* 1=Dir: mstr <-- slave  */
-#define XIIC_SR_TX_FIFO_FULL_MASK	  0x10	/* 1 = Tx FIFO full	  */
-#define XIIC_SR_RX_FIFO_FULL_MASK	  0x20	/* 1 = Rx FIFO full	  */
-#define XIIC_SR_RX_FIFO_EMPTY_MASK	  0x40	/* 1 = Rx FIFO empty	  */
-
-/* IPIF Interrupt Status Register masks	   Interrupt occurs when...	  */
-
-#define XIIC_INTR_ARB_LOST_MASK		  0x01	/* 1 = arbitration lost	  */
-#define XIIC_INTR_TX_ERROR_MASK		  0x02	/* 1=Tx error/msg complete*/
-#define XIIC_INTR_TX_EMPTY_MASK		  0x04	/* 1 = Tx FIFO/reg empty  */
-#define XIIC_INTR_RX_FULL_MASK		  0x08	/* 1=Rx FIFO/reg=OCY level*/
-#define XIIC_INTR_BNB_MASK		  0x10	/* 1 = Bus not busy	  */
-#define XIIC_INTR_AAS_MASK		  0x20	/* 1 = when addr as slave */
-#define XIIC_INTR_NAAS_MASK		  0x40	/* 1 = not addr as slave  */
-#define XIIC_INTR_TX_HALF_MASK		  0x80	/* 1 = TX FIFO half empty */
-
-/* IPIF Device Interrupt Register masks */
-
-#define XIIC_IPIF_IIC_MASK	    0x00000004UL    /* 1=inter enabled */
-#define XIIC_IPIF_ERROR_MASK	    0x00000001UL    /* 1=inter enabled */
-#define XIIC_IPIF_INTER_ENABLE_MASK  (XIIC_IPIF_IIC_MASK |  \
-				      XIIC_IPIF_ERROR_MASK)
-
-#define XIIC_TX_ADDR_SENT	      0x00
-#define XIIC_TX_ADDR_MSTR_RECV_MASK   0x02
-
-/* The following constants specify the depth of the FIFOs */
-
-#define IIC_RX_FIFO_DEPTH	  16   /* Rx fifo capacity		 */
-#define IIC_TX_FIFO_DEPTH	  16   /* Tx fifo capacity		 */
-
-/* The following constants specify groups of interrupts that are typically
- * enabled or disables at the same time
- */
-#define XIIC_TX_INTERRUPTS					    \
-	    (XIIC_INTR_TX_ERROR_MASK | XIIC_INTR_TX_EMPTY_MASK |    \
-	     XIIC_INTR_TX_HALF_MASK)
-
-#define XIIC_TX_RX_INTERRUPTS (XIIC_INTR_RX_FULL_MASK | XIIC_TX_INTERRUPTS)
-
-/* The following constants are used with the following macros to specify the
- * operation, a read or write operation.
- */
-#define XIIC_READ_OPERATION  1
-#define XIIC_WRITE_OPERATION 0
-
-/* The following constants are used with the transmit FIFO fill function to
- * specify the role which the IIC device is acting as, a master or a slave.
- */
-#define XIIC_MASTER_ROLE     1
-#define XIIC_SLAVE_ROLE	     0
-
-/**************************** Type Definitions ******************************/
-
-
-/***************** Macros (Inline Functions) Definitions ********************/
-
-
-/************************** Function Prototypes *****************************/
-
-unsigned XIic_Recv(u32 BaseAddress, u8 Address,
-		   u8 *BufferPtr, unsigned ByteCount);
-
-unsigned XIic_Send(u32 BaseAddress, u8 Address,
-		   u8 *BufferPtr, unsigned ByteCount);
-
-#endif		  /* end of protection macro */
diff --git a/board/xilinx/zynq/Makefile b/board/xilinx/zynq/Makefile
index ef4faa1..43c552d 100644
--- a/board/xilinx/zynq/Makefile
+++ b/board/xilinx/zynq/Makefile
@@ -22,9 +22,6 @@
 #
 
 include $(TOPDIR)/config.mk
-ifneq ($(OBJTREE),$(SRCTREE))
-$(shell mkdir -p $(obj)../common)
-endif
 
 LIB	= $(obj)lib$(BOARD).o
 
diff --git a/boards.cfg b/boards.cfg
index 6d71f18..98f7a14 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -856,12 +856,24 @@ P5020DS_SPIFLASH	     powerpc     mpc85xx     corenet_ds          freescale
 P5020DS_SRIO_PCIE_BOOT          powerpc     mpc85xx     corenet_ds          freescale      -           P5020DS:SRIO_PCIE_BOOT_SLAVE,SYS_TEXT_BASE=0xFFF80000
 P5040DS                      powerpc     mpc85xx     corenet_ds          freescale
 BSC9131RDB_SPIFLASH          powerpc     mpc85xx     bsc9131rdb          freescale      -           BSC9131RDB:BSC9131RDB,SPIFLASH
+BSC9132QDS_NOR_DDRCLK100     powerpc     mpc85xx     bsc9132qds          freescale      -           BSC9132QDS:BSC9132QDS,SYS_CLK_100_DDR_100
+BSC9132QDS_NOR_DDRCLK133     powerpc     mpc85xx     bsc9132qds          freescale      -           BSC9132QDS:BSC9132QDS,SYS_CLK_100_DDR_133
+BSC9132QDS_SDCARD_DDRCLK100  powerpc     mpc85xx     bsc9132qds          freescale      -           BSC9132QDS:BSC9132QDS,SDCARD,SYS_CLK_100_DDR_100
+BSC9132QDS_SDCARD_DDRCLK133  powerpc     mpc85xx     bsc9132qds          freescale      -           BSC9132QDS:BSC9132QDS,SDCARD,SYS_CLK_100_DDR_133
+BSC9132QDS_SPIFLASH_DDRCLK100 powerpc    mpc85xx     bsc9132qds          freescale      -           BSC9132QDS:BSC9132QDS,SPIFLASH,SYS_CLK_100_DDR_100
+BSC9132QDS_SPIFLASH_DDRCLK133 powerpc    mpc85xx     bsc9132qds          freescale      -           BSC9132QDS:BSC9132QDS,SPIFLASH,SYS_CLK_100_DDR_133
 stxgp3                       powerpc     mpc85xx     stxgp3              stx
 stxssa                       powerpc     mpc85xx     stxssa              stx            -           stxssa
 stxssa_4M                    powerpc     mpc85xx     stxssa              stx            -           stxssa:STXSSA_4M
 T4240QDS                     powerpc     mpc85xx     t4qds               freescale
 T4240QDS_SDCARD              powerpc     mpc85xx     t4qds               freescale	-           T4240QDS:RAMBOOT_PBL,SDCARD,SYS_TEXT_BASE=0xFFF80000
 T4240QDS_SPIFLASH            powerpc     mpc85xx     t4qds               freescale	-           T4240QDS:RAMBOOT_PBL,SPIFLASH,SYS_TEXT_BASE=0xFFF80000
+B4860QDS                     powerpc     mpc85xx     b4860qds            freescale      -           B4860QDS:PPC_B4860
+B4860QDS_NAND		     powerpc     mpc85xx     b4860qds            freescale      -           B4860QDS:PPC_B4860,RAMBOOT_PBL,NAND,SYS_TEXT_BASE=0xFFF80000
+B4860QDS_SPIFLASH            powerpc     mpc85xx     b4860qds            freescale	-           B4860QDS:PPC_B4860,RAMBOOT_PBL,SPIFLASH,SYS_TEXT_BASE=0xFFF80000
+B4420QDS                     powerpc     mpc85xx     b4860qds            freescale	-	    B4860QDS:PPC_B4420
+B4420QDS_NAND		     powerpc     mpc85xx     b4860qds            freescale      -           B4860QDS:PPC_B4420,RAMBOOT_PBL,NAND,SYS_TEXT_BASE=0xFFF80000
+B4420QDS_SPIFLASH            powerpc     mpc85xx     b4860qds            freescale	-           B4860QDS:PPC_B4420,RAMBOOT_PBL,SPIFLASH,SYS_TEXT_BASE=0xFFF80000
 xpedite520x                  powerpc     mpc85xx     -                   xes
 xpedite537x                  powerpc     mpc85xx     -                   xes
 xpedite550x                  powerpc     mpc85xx     -                   xes
diff --git a/common/cmd_bdinfo.c b/common/cmd_bdinfo.c
index 48cdd16..85279d5 100644
--- a/common/cmd_bdinfo.c
+++ b/common/cmd_bdinfo.c
@@ -51,6 +51,25 @@ static void print_eth(int idx)
 }
 
 __maybe_unused
+static void print_eths(void)
+{
+	struct eth_device *dev;
+	int i = 0;
+
+	do {
+		dev = eth_get_dev_by_index(i);
+		if (dev) {
+			printf("eth%dname    = %s\n", i, dev->name);
+			print_eth(i);
+			i++;
+		}
+	} while (dev);
+
+	printf("current eth = %s\n", eth_get_name());
+	printf("ip_addr     = %s\n", getenv("ipaddr"));
+}
+
+__maybe_unused
 static void print_lnum(const char *name, unsigned long long value)
 {
 	printf("%-12s= 0x%.8llX\n", name, value);
@@ -195,10 +214,9 @@ int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 	print_num("sram size      ",	(ulong)bd->bi_sramsize);
 #endif
 #if defined(CONFIG_CMD_NET)
-	print_eth(0);
-	printf("ip_addr     = %s\n", getenv("ipaddr"));
+	print_eths();
 #endif
-	printf("baudrate    = %u bps\n", (ulong)bd->bi_baudrate);
+	printf("baudrate    = %u bps\n", bd->bi_baudrate);
 	return 0;
 }
 
@@ -366,18 +384,19 @@ int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 	}
 
 #if defined(CONFIG_CMD_NET)
-	print_eth(0);
-	printf("ip_addr     = %s\n", getenv("ipaddr"));
+	print_eths();
 #endif
 	printf("baudrate    = %u bps\n", bd->bi_baudrate);
 #if !(defined(CONFIG_SYS_ICACHE_OFF) && defined(CONFIG_SYS_DCACHE_OFF))
-	print_num("TLB addr", gd->tlb_addr);
+	print_num("TLB addr", gd->arch.tlb_addr);
 #endif
 	print_num("relocaddr", gd->relocaddr);
 	print_num("reloc off", gd->reloc_off);
 	print_num("irq_sp", gd->irq_sp);	/* irq stack pointer */
 	print_num("sp start ", gd->start_addr_sp);
+#if defined(CONFIG_LCD) || defined(CONFIG_VIDEO)
 	print_num("FB base  ", gd->fb_base);
+#endif
 	/*
 	 * TODO: Currently only support for davinci SOC's is added.
 	 * Remove this check once all the board implement this.
@@ -463,7 +482,9 @@ int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 	print_eth(0);
 	printf("ip_addr     = %s\n", getenv("ipaddr"));
 #endif
+#if defined(CONFIG_LCD) || defined(CONFIG_VIDEO)
 	print_num("FB base  ", gd->fb_base);
+#endif
 	return 0;
 }
 
diff --git a/common/cmd_bootm.c b/common/cmd_bootm.c
index 1b8a8c1..7ae5d5b 100644
--- a/common/cmd_bootm.c
+++ b/common/cmd_bootm.c
@@ -498,7 +498,8 @@ static int do_bootm_subcommand(cmd_tbl_t *cmdtp, int flag, int argc,
 		return CMD_RET_USAGE;
 	}
 
-	if (images.state >= state) {
+	if (images.state < BOOTM_STATE_START ||
+	    images.state >= state) {
 		printf("Trying to execute a command out of order\n");
 		return CMD_RET_USAGE;
 	}
diff --git a/common/cmd_immap.c b/common/cmd_immap.c
index 1f59c1e..fdf9489 100644
--- a/common/cmd_immap.c
+++ b/common/cmd_immap.c
@@ -453,7 +453,7 @@ static void prbrg (int n, uint val)
 #if defined(CONFIG_8xx)
 	ulong clock = gd->cpu_clk;
 #elif defined(CONFIG_8260)
-	ulong clock = gd->brg_clk;
+	ulong clock = gd->arch.brg_clk;
 #endif
 
 	printf ("BRG%d:", n);
diff --git a/common/cmd_time.c b/common/cmd_time.c
index 6dbdbbf..9808cd6 100644
--- a/common/cmd_time.c
+++ b/common/cmd_time.c
@@ -22,36 +22,6 @@
 #include <common.h>
 #include <command.h>
 
-/*
- * TODO(clchiou): This function actually minics the bottom-half of the
- * run_command() function.  Since this function has ARM-dependent timer
- * codes, we cannot merge it with the run_command() for now.
- */
-static int run_command_and_time_it(int flag, int argc, char * const argv[],
-		ulong *cycles)
-{
-	cmd_tbl_t *cmdtp = find_cmd(argv[0]);
-	int retval = 0;
-
-	if (!cmdtp) {
-		printf("%s: command not found\n", argv[0]);
-		return 1;
-	}
-	if (argc > cmdtp->maxargs)
-		return CMD_RET_USAGE;
-
-	/*
-	 * TODO(clchiou): get_timer_masked() is only defined in certain ARM
-	 * boards.  We could use the new timer API that Graeme is proposing
-	 * so that this piece of code would be arch-independent.
-	 */
-	*cycles = get_timer_masked();
-	retval = cmdtp->cmd(cmdtp, flag, argc, argv);
-	*cycles = get_timer_masked() - *cycles;
-
-	return retval;
-}
-
 static void report_time(ulong cycles)
 {
 	ulong minutes, seconds, milliseconds;
@@ -75,11 +45,12 @@ static int do_time(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 {
 	ulong cycles = 0;
 	int retval = 0;
+	int repeatable;
 
 	if (argc == 1)
 		return CMD_RET_USAGE;
 
-	retval = run_command_and_time_it(0, argc - 1, argv + 1, &cycles);
+	retval = cmd_process(0, argc - 1, argv + 1, &repeatable, &cycles);
 	report_time(cycles);
 
 	return retval;
diff --git a/common/command.c b/common/command.c
index 50c8429..305a236 100644
--- a/common/command.c
+++ b/common/command.c
@@ -513,7 +513,7 @@ static int cmd_call(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 }
 
 enum command_ret_t cmd_process(int flag, int argc, char * const argv[],
-			       int *repeatable)
+			       int *repeatable, ulong *ticks)
 {
 	enum command_ret_t rc = CMD_RET_SUCCESS;
 	cmd_tbl_t *cmdtp;
@@ -543,7 +543,11 @@ enum command_ret_t cmd_process(int flag, int argc, char * const argv[],
 
 	/* If OK so far, then do the command */
 	if (!rc) {
+		if (ticks)
+			*ticks = get_timer(0);
 		rc = cmd_call(cmdtp, flag, argc, argv);
+		if (ticks)
+			*ticks = get_timer(*ticks);
 		*repeatable &= cmdtp->repeatable;
 	}
 	if (rc == CMD_RET_USAGE)
diff --git a/common/env_mmc.c b/common/env_mmc.c
index ce21671..02bd5ae 100644
--- a/common/env_mmc.c
+++ b/common/env_mmc.c
@@ -46,13 +46,11 @@ DECLARE_GLOBAL_DATA_PTR;
 #define CONFIG_ENV_OFFSET 0
 #endif
 
-static int __mmc_get_env_addr(struct mmc *mmc, u32 *env_addr)
+__weak int mmc_get_env_addr(struct mmc *mmc, u32 *env_addr)
 {
 	*env_addr = CONFIG_ENV_OFFSET;
 	return 0;
 }
-int mmc_get_env_addr(struct mmc *mmc, u32 *env_addr)
-	__attribute__((weak, alias("__mmc_get_env_addr")));
 
 int env_init(void)
 {
diff --git a/common/hush.c b/common/hush.c
index eb6c879..cc81c9c 100644
--- a/common/hush.c
+++ b/common/hush.c
@@ -1665,7 +1665,7 @@ static int run_pipe_real(struct pipe *pi)
 		}
 		/* Process the command */
 		return cmd_process(flag, child->argc, child->argv,
-				   &flag_repeat);
+				   &flag_repeat, NULL);
 #endif
 	}
 #ifndef __U_BOOT__
diff --git a/common/main.c b/common/main.c
index 5d8454e..e2d2e09 100644
--- a/common/main.c
+++ b/common/main.c
@@ -225,6 +225,7 @@ static inline
 int abortboot(int bootdelay)
 {
 	int abort = 0;
+	unsigned long ts;
 
 #ifdef CONFIG_MENUPROMPT
 	printf(CONFIG_MENUPROMPT);
@@ -248,11 +249,10 @@ int abortboot(int bootdelay)
 #endif
 
 	while ((bootdelay > 0) && (!abort)) {
-		int i;
-
 		--bootdelay;
-		/* delay 100 * 10ms */
-		for (i=0; !abort && i<100; ++i) {
+		/* delay 1000 ms */
+		ts = get_timer(0);
+		do {
 			if (tstc()) {	/* we got a key press	*/
 				abort  = 1;	/* don't auto boot	*/
 				bootdelay = 0;	/* no more delay	*/
@@ -264,7 +264,7 @@ int abortboot(int bootdelay)
 				break;
 			}
 			udelay(10000);
-		}
+		} while (!abort && get_timer(ts) < 1000);
 
 		printf("\b\b\b%2d ", bootdelay);
 	}
@@ -1452,7 +1452,7 @@ static int builtin_run_command(const char *cmd, int flag)
 			continue;
 		}
 
-		if (cmd_process(flag, argc, argv, &repeatable))
+		if (cmd_process(flag, argc, argv, &repeatable, NULL))
 			rc = -1;
 
 		/* Did the user stop this? */
diff --git a/common/stdio.c b/common/stdio.c
index 97ff9cf..5d5117c 100644
--- a/common/stdio.c
+++ b/common/stdio.c
@@ -207,7 +207,7 @@ int stdio_init (void)
 	/* Initialize the list */
 	INIT_LIST_HEAD(&(devs.list));
 
-#ifdef CONFIG_ARM_DCC_MULTI
+#ifdef CONFIG_ARM_DCC
 	drv_arm_dcc_init ();
 #endif
 #if defined(CONFIG_HARD_I2C) || defined(CONFIG_SOFT_I2C)
diff --git a/doc/README.b4860qds b/doc/README.b4860qds
new file mode 100644
index 0000000..f6c5ff8
--- /dev/null
+++ b/doc/README.b4860qds
@@ -0,0 +1,330 @@
+Overview
+--------
+The B4860QDS is a Freescale reference board that hosts the B4860 SoC (and variants).
+
+B4860 Overview
+-------------
+The B4860 QorIQ Qonverge device is a Freescale high-end, multicore SoC based on
+StarCore and Power Architecture® cores. It targets the broadband wireless 
+infrastructure and builds upon the proven success of the existing multicore
+DSPs and Power CPUs. It is designed to bolster the rapidly changing and
+expanding wireless markets, such as 3GLTE (FDD and TDD), LTE-Advanced, and UMTS.
+
+The B4860 is a highly-integrated StarCore and Power Architecture processor that
+contains:
+. Six fully-programmable StarCore SC3900 FVP subsystems, divided into three
+clusters-each core runs up to 1.2 GHz, with an architecture highly optimized for
+wireless base station applications
+. Four dual-thread e6500 Power Architecture processors organized in one cluster-each
+core runs up to 1.8 GHz
+. Two DDR3/3L controllers for high-speed, industry-standard memory interface each
+runs at up to 1866.67 MHz
+. MAPLE-B3 hardware acceleration-for forward error correction schemes including
+Turbo or Viterbi decoding, Turbo encoding and rate matching, MIMO MMSE
+equalization scheme, matrix operations, CRC insertion and check, DFT/iDFT and
+FFT/iFFT calculations, PUSCH/PDSCH acceleration, and UMTS chip rate
+acceleration
+. CoreNet fabric that fully supports coherency using MESI protocol between the
+  e6500 cores, SC3900 FVP cores, memories and external interfaces.
+  CoreNet fabric interconnect runs at 667 MHz and supports coherent and
+  non-coherent out of order transactions with prioritization and bandwidth
+  allocation amongst CoreNet endpoints.
+. Data Path Acceleration Architecture, which includes the following:
+. Frame Manager (FMan), which supports in-line packet parsing and general
+  classification to enable policing and QoS-based packet distribution
+. Queue Manager (QMan) and Buffer Manager (BMan), which allow offloading
+  of queue management, task management, load distribution, flow ordering, buffer
+  management, and allocation tasks from the cores
+. Security engine (SEC 5.3)-crypto-acceleration for protocols such as IPsec,
+  SSL, and 802.16
+. RapidIO manager (RMAN) - Support SRIO types 8, 9, 10, and 11 (inbound and
+  outbound). Supports types 5, 6 (outbound only)
+. Large internal cache memory with snooping and stashing capabilities for
+  bandwidth saving and high utilization of processor elements. The 9856-Kbyte
+  internal memory space includes the following:
+. 32 Kbyte L1 ICache per e6500/SC3900 core
+. 32 Kbyte L1 DCache per e6500/SC3900 core
+. 2048 Kbyte unified L2 cache for each SC3900 FVP cluster
+. 2048 Kbyte unified L2 cache for the e6500 cluster
+. Two 512 Kbyte shared L3 CoreNet platform caches (CPC)
+. Sixteen 10-GHz SerDes lanes serving:
+. Two Serial RapidIO interfaces.
+	- Each supports up to 4 lanes and a total of up to 8 lanes
+. Up to 8-lanes Common Public Radio Interface (CPRI) controller for glue-less
+  antenna connection
+. Two 10-Gbit Ethernet controllers (10GEC)
+. Six 1G/2.5-Gbit Ethernet controllers for network communications
+. PCI Express controller
+. Debug (Aurora)
+. Two OCeaN DMAs
+. Various system peripherals
+. 182 32-bit timers
+
+B4860QDS Overview
+------------------
+- DDRC1: Ten separate DDR3 parts of 16-bit to support 72-bit (ECC) at 1866MT/s, ECC, 4 GB
+  of memory in two ranks of 2 GB.
+- DDRC2: Five separate DDR3 parts of 16-bit to support 72-bit (ECC) at 1866MT/s, ECC, 2 GB
+  of memory. Single rank.
+- SerDes 1 multiplexing: Two Vitesse (transmit and receive path) cross-point 16x16 switch
+  VSC3316
+- SerDes 2 multiplexing: Two Vitesse (transmit and receive path) cross-point 8x8 switch VSC3308
+- USB 2.0 ULPI PHY USB3315 by SMSC supports USB port in host mode.
+  B4860 UART port is available over USB-to-UART translator USB2SER or over RS232 flat cable.
+- A Vitesse dual SGMII phy VSC8662 links the B4860 SGMII lines to 2xRJ-45 copper connectors
+  for Stand-alone mode and to the 1000Base-X over AMC MicroTCA connector ports 0 and 2 for
+  AMC mode.
+- The B4860 configuration may be loaded from nine bits coded reset configuration reset source. The
+  RCW source is set by appropriate DIP-switches:
+- 16-bit NOR Flash / PROMJet
+- QIXIS 8-bit NOR Flash Emulator
+- 8-bit NAND Flash
+- 24-bit SPI Flash
+- Long address I2C EEPROM
+- Available debug interfaces are:
+	- On-board eCWTAP controller with ETH and USB I/F
+	- JTAG/COP 16-pin header for any external TAP controller
+	- External JTAG source over AMC to support B2B configuration
+	- 70-pin Aurora debug connector
+- QIXIS (FPGA) logic:
+	- 2 KB internal memory space including
+- IDT840NT4 clock synthesizer provides B4860 essential clocks : SYSCLK, DDRCLK1,2 and
+  RTCCLK.
+- Two 8T49N222A SerDes ref clock devices support two SerDes port clock frequency - total four
+  refclk, including CPRI clock scheme.
+
+B4420 Personality
+--------------------
+
+B4420 Personality
+--------------------
+B4420 is a reduced personality of B4860 with less core/clusters(both SC3900 and e6500), less DDR
+controllers, less serdes lanes, less SGMII interfaces and reduced target frequencies. 
+
+Key differences between B4860 and B4420
+----------------------------------------
+ 
+B4420 has:
+1. Less e6500 cores: 1 cluster with 2 e6500 cores
+2. Less SC3900 cores/clusters: 1 cluster with 2 SC3900 cores per cluster.
+3. Single DDRC
+4. 2X 4 lane serdes
+5. 3 SGMII interfaces
+6. no sRIO
+7. no 10G
+
+B4860QDS Default Settings
+-------------------------
+
+Switch Settings
+----------------
+
+SW1	OFF [0]	OFF [1]	OFF [1]	OFF [0]	OFF [1]	OFF [0]	OFF [1]	OFF [1]
+SW2	ON	ON	ON	ON	ON	ON	OFF	OFF
+SW3	OFF	OFF	OFF	ON	OFF	OFF	ON	OFF
+SW5	OFF	OFF	OFF	OFF	OFF	OFF	ON	ON
+
+Note: PCIe slots modes: All the PCIe devices work as Root Complex.
+Note: Boot location: NOR flash.
+
+SysClk/Core(e6500)/CCB/DDR/FMan/DDRCLK/StarCore/CPRI-Maple/eTVPE-Maple/ULB-Maple
+66MHz/1.6GHz/667MHz/1.6GHz data rate/667MHz/133MHz/1200MHz/500MHz/800MHz/667MHz
+
+a) NAND boot	
+	SW1 [1.1] = 0
+	SW2 [1.1] = 1
+	SW3 [1:4] = 0001
+b) NOR boot
+	SW1 [1.1] = 1
+	SW2 [1.1] = 0
+	SW3 [1:4] = 1000.
+
+B4420QDS Default Settings
+-------------------------
+
+Switch Settings
+----------------
+SW1	OFF[0]	OFF [0]	OFF [0]	OFF [0]	OFF [0]	OFF [0]	OFF [0]	OFF [0]
+SW2	ON	OFF	ON	OFF	ON	ON	OFF	OFF
+SW3	OFF	OFF	OFF	ON	OFF	OFF	ON	OFF
+SW5	OFF	OFF	OFF	OFF	OFF	OFF	ON	ON
+
+Note: PCIe slots modes: All the PCIe devices work as Root Complex.
+Note: Boot location: NOR flash.
+
+SysClk/Core(e6500)/CCB/DDR/FMan/DDRCLK/StarCore/CPRI-Maple/eTVPE-Maple/ULB-Maple
+66MHz/1.6GHz/667MHz/1.6GHz data rate/667MHz/133MHz/1200MHz/500MHz/800MHz/667MHz
+
+a) NAND boot	
+	SW1 [1.1] = 0
+	SW2 [1.1] = 1
+	SW3 [1:4] = 0001
+b) NOR boot
+	SW1 [1.1] = 1
+	SW2 [1.1] = 0
+	SW3 [1:4] = 1000.
+
+Memory map on B4860QDS
+----------------------
+The addresses in brackets are physical addresses.
+
+Start Address	End Address	Description	Size
+0xF_FFDF_1000 	0xF_FFFF_FFFF	Free		2 MB
+0xF_FFDF_0000 	0xF_FFDF_0FFF	IFC - FPGA 	4 KB
+0xF_FF81_0000 	0xF_FFDE_FFFF	Free		5 MB
+0xF_FF80_0000	0xF_FF80_FFFF	IFC NAND Flash	64 KB
+0xF_FF00_0000	0xF_FF7F_FFFF	Free		8 MB
+0xF_FE00_0000 	0xF_FEFF_FFFF	CCSRBAR		16 MB
+0xF_F801_0000 	0xF_FDFF_FFFF	Free		95 MB
+0xF_F800_0000	0xF_F800_FFFF	PCIe I/O Space 	64 KB
+0xF_F600_0000 	0xF_F7FF_FFFF	QMAN s/w portal	32 MB
+0xF_F400_0000 	0xF_F5FF_FFFF	BMAN s/w portal	32 MB
+0xF_F000_0000 	0xF_F3FF_FFFF	Free		64 MB
+0xF_E800_0000 	0xF_EFFF_FFFF	IFC  NOR Flash 	128 MB
+0xF_E000_0000	0xF_E7FF_FFFF	Promjet		128 MB
+0xF_A0C0_0000 	0xF_DFFF_FFFF	Free		1012 MB
+0xF_A000_0000 	0xF_A0BF_FFFF	MAPLE0/1/2	12 MB
+0xF_0040_0000 	0xF_9FFF_FFFF	Free		12 GB
+0xF_0000_0000 	0xF_003F_FFFF	DCSR		4 MB
+0xC_4000_0000 	0xE_FFFF_FFFF	Free		11 GB
+0xC_3000_0000 	0xC_3FFF_FFFF	sRIO-2 I/O 	256 MB
+0xC_2000_0000 	0xC_2FFF_FFFF	sRIO-1 I/O  	256 MB
+0xC_0000_0000	0xC_1FFF_FFFF	PCIe Mem Space 	512 MB
+0x1_0000_0000 	0xB_FFFF_FFFF	Free		44 GB
+0x0_8000_0000 	0x0_FFFF_FFFF	DDRC1		2 GB
+0x0_0000_0000 	0x0_7FFF_FFFF	DDRC2	  	2 GB
+
+Memory map on B4420QDS
+----------------------
+The addresses in brackets are physical addresses.
+
+Start Address	End Address	Description	Size
+0xF_FFDF_1000 	0xF_FFFF_FFFF	Free		2 MB
+0xF_FFDF_0000 	0xF_FFDF_0FFF	IFC - FPGA 	4 KB
+0xF_FF81_0000 	0xF_FFDE_FFFF	Free		5 MB
+0xF_FF80_0000	0xF_FF80_FFFF	IFC NAND Flash	64 KB
+0xF_FF00_0000	0xF_FF7F_FFFF	Free		8 MB
+0xF_FE00_0000 	0xF_FEFF_FFFF	CCSRBAR		16 MB
+0xF_F801_0000 	0xF_FDFF_FFFF	Free		95 MB
+0xF_F800_0000	0xF_F800_FFFF	PCIe I/O Space 	64 KB
+0xF_F600_0000 	0xF_F7FF_FFFF	QMAN s/w portal	32 MB
+0xF_F400_0000 	0xF_F5FF_FFFF	BMAN s/w portal	32 MB
+0xF_F000_0000 	0xF_F3FF_FFFF	Free		64 MB
+0xF_E800_0000 	0xF_EFFF_FFFF	IFC  NOR Flash 	128 MB
+0xF_E000_0000	0xF_E7FF_FFFF	Promjet		128 MB
+0xF_A0C0_0000 	0xF_DFFF_FFFF	Free		1012 MB
+0xF_A000_0000 	0xF_A0BF_FFFF	MAPLE0/1/2	12 MB
+0xF_0040_0000 	0xF_9FFF_FFFF	Free		12 GB
+0xF_0000_0000 	0xF_003F_FFFF	DCSR		4 MB
+0xC_4000_0000 	0xE_FFFF_FFFF	Free		11 GB
+0xC_3000_0000 	0xC_3FFF_FFFF	sRIO-2 I/O 	256 MB
+0xC_2000_0000 	0xC_2FFF_FFFF	sRIO-1 I/O  	256 MB
+0xC_0000_0000	0xC_1FFF_FFFF	PCIe Mem Space 	512 MB
+0x1_0000_0000 	0xB_FFFF_FFFF	Free		44 GB
+0x0_0000_0000 	0x0_FFFF_FFFF	DDRC1		4 GB
+
+
+NOR Flash memory Map on B4860 and B4420QDS
+------------------------------------------
+ Start		 End		Definition			Size
+0xEFF80000	0xEFFFFFFF	u-boot (current bank)		512KB
+0xEFF60000	0xEFF7FFFF	u-boot env (current bank)	128KB
+0xEFF40000	0xEFF5FFFF	FMAN Ucode (current bank)	128KB
+0xEF300000	0xEFF3FFFF	rootfs (alternate bank)		12MB + 256KB
+0xEE800000	0xEE8FFFFF	device tree (alternate bank)	1MB
+0xEE020000	0xEE6FFFFF	Linux.uImage (alternate bank)	6MB+896KB
+0xEE000000	0xEE01FFFF	RCW (alternate bank)		128KB
+0xEDF80000	0xEDFFFFFF	u-boot (alternate bank)		512KB
+0xEDF60000	0xEDF7FFFF	u-boot env (alternate bank)	128KB
+0xEDF40000	0xEDF5FFFF	FMAN ucode (alternate bank)	128KB
+0xED300000	0xEDF3FFFF	rootfs (current bank)		12MB+256MB
+0xEC800000	0xEC8FFFFF	device tree (current bank)	1MB
+0xEC020000	0xEC6FFFFF	Linux.uImage (current bank)	6MB+896KB
+0xEC000000	0xEC01FFFF	RCW (current bank)		128KB
+
+Various Software configurations/environment variables/commands
+--------------------------------------------------------------
+The below commands apply to both B4860QDS and B4420QDS.
+
+1. U-boot environment variable hwconfig 
+   The default hwconfig is:
+	hwconfig=fsl_ddr:ctlr_intlv=null,bank_intlv=cs0_cs1;usb1:
+					dr_mode=host,phy_type=ulpi
+   Note: For USB gadget set "dr_mode=peripheral"
+
+2. FMAN Ucode versions
+   fsl_fman_ucode_B4860_106_3_6.bin
+
+3. Switching to alternate bank
+   Commands for switching to alternate bank.
+
+	1. To change from vbank0 to vbank2 
+		=> qixis_reset altbank (it will boot using vbank2)
+
+	2.To change from vbank2 to vbank0
+		=> qixis reset (it will boot using vbank0)
+
+4. To change personality of board
+   For changing personality from B4860 to B4420
+	1)Boot from vbank0
+	2)Flash vbank2 with b4420 rcw and u-boot
+	3)Give following commands to uboot prompt
+	   => mw.b ffdf0040 0x30; 
+	   => mw.b ffdf0010 0x00;
+	   => mw.b ffdf0062 0x02;
+	   => mw.b ffdf0050 0x02;
+	   => mw.b ffdf0010 0x30;
+	   => reset
+
+   Note: Power off cycle will lead to default switch settings.
+   Note: 0xffdf0000 is the address of the QIXIS FPGA.
+
+5. Switching between NOR and NAND boot(RCW src changed from NOR <-> NAND)
+
+   To change from NOR to NAND boot give following command on uboot prompt
+	=> mw.b ffdf0040 0x30
+	=> mw.b ffdf0010 0x00 
+	=> mw.b 0xffdf0050 0x08
+	=> mw.b 0xffdf0060 0x82
+	=> mw.b ffdf0061 0x00
+	=> mw.b ffdf0010 0x30   
+	=> reset
+
+   To change from NAND to NOR boot give following command on uboot prompt:
+	=> mw.b ffdf0040 0x30
+	=> mw.b ffdf0010 0x00 
+	=> mw.b 0xffdf0050 0x00(for vbank0) or (mw.b 0xffdf0050 0x02 for vbank2)
+	=> mw.b 0xffdf0060 0x12
+	=> mw.b ffdf0061 0x01
+	=> mw.b ffdf0010 0x30   
+	=> reset
+
+   Note: Power off cycle will lead to default switch settings.
+   Note: 0xffdf0000 is the address of the QIXIS FPGA.
+
+6.  Ethernet interfaces for B4860QDS 
+   Serdes protocosl tested:
+   0x2a, 0x8d (serdes1, serdes2) [DEFAULT]
+   0x2a, 0xb2 (serdes1, serdes2)
+
+   When using [DEFAULT] RCW, which including 2 * 1G SGMII on board and 2 * 1G
+   SGMII on SGMII riser card. 
+   Under U-boot these network interfaces are recognized as:
+   FM1@DTSEC3, FM1@DTSEC4, FM1@DTSEC5 and FM1@DTSEC6.
+
+   On Linux the interfaces are renamed as:
+	. eth2 -> fm1-gb2
+	. eth3 -> fm1-gb3
+	. eth4 -> fm1-gb4
+	. eth5 -> fm1-gb5
+
+7. RCW and Ethernet interfaces for B4420QDS 
+   Serdes protocosl tested:
+   0x18, 0x9e (serdes1, serdes2)
+
+   Under U-boot these network interfaces are recognized as:
+   FM1@DTSEC3, FM1@DTSEC4 and  e1000#0.
+
+   On Linux the interfaces are renamed as:
+	. eth2 -> fm1-gb2
+	. eth3 -> fm1-gb3
diff --git a/doc/README.fsl-ddr b/doc/README.fsl-ddr
index 3992640..1243a12 100644
--- a/doc/README.fsl-ddr
+++ b/doc/README.fsl-ddr
@@ -263,23 +263,38 @@ Reference http://www.samsung.com/global/business/semiconductor/products/dram/dow
 Interactive DDR debugging
 ===========================
 
-For DDR parameter tuning up and debugging, the interactive DDR debugging can
-be activated by saving an environment variable "ddr_interactive". The value
-doesn't matter. Once activated, U-boot prompts "FSL DDR>" before enabling DDR
-controller. The available commands can be seen by typing "help".
+For DDR parameter tuning up and debugging, the interactive DDR debugger can
+be activated by setting the environment variable "ddr_interactive" to any
+value.  (The value of ddr_interactive may have a meaning in the future, but,
+for now, the presence of the variable will cause the debugger to run.)  Once
+activated, U-boot will show the prompt "FSL DDR>" before enabling the DDR
+controller.  The available commands are printed by typing "help".
+
+Another way to enter the interactive DDR debugger without setting the
+environment variable is to send the 'd' character early during the boot
+process.  To save booting time, no additional delay is added, so the window
+to send the key press is very short -- basically, it is the time before the
+memory controller code starts to run.  For example, when rebooting from
+within u-boot, the user must press 'd' IMMEDIATELY after hitting enter to
+initiate a 'reset' command.  In case of power on/reset, the user can hold
+down the 'd' key while applying power or hitting the board's reset button.
 
 The example flow of using interactive debugging is
 type command "compute" to calculate the parameters from the default
 type command "print" with arguments to show SPD, options, registers
 type command "edit" with arguments to change any if desired
+type command "copy" with arguments to copy controller/dimm settings
 type command "go" to continue calculation and enable DDR controller
+
+Additional commands to restart the debugging are:
 type command "reset" to reset the board
 type command "recompute" to reload SPD and start over
 
 Note, check "next_step" to show the flow. For example, after edit opts, the
 next_step is STEP_ASSIGN_ADDRESSES. After editing registers, the next_step is
-STEP_PROGRAM_REGS. Upon issuing command "go", DDR controller will be enabled
-with current setting without further calculation.
+STEP_PROGRAM_REGS.  Upon issuing command "go", the debugger will program the
+DDR controller with the current setting without further calculation and then
+exit to resume the booting of the machine.
 
 The detail syntax for each commands are
 
@@ -306,6 +321,10 @@ edit <c#> <d#> <spd|dimmparms|commonparms|opts|addresses|regs> <element> <value>
 			  byte number if the object is SPD
 	<value>		- decimal or heximal (prefixed with 0x) numbers
 
+copy <src c#> <src d#> <spd|dimmparms|commonparms|opts|addresses|regs> <dst c#> <dst d#>
+	same as for "edit" command
+	DIMM numbers ignored for commonparms, opts, and regs
+
 reset
 	no arguement	- reset the board
 
@@ -328,7 +347,7 @@ Examples of debugging flow
 
 	FSL DDR>compute
 	Detected UDIMM UG51U6400N8SU-ACF
-	SL DDR>print
+	FSL DDR>print
 	print [c<n>] [d<n>] [spd] [dimmparms] [commonparms] [opts] [addresses] [regs]
 	FSL DDR>print dimmparms
 	DIMM parameters:  Controller=0 DIMM=0
diff --git a/drivers/block/systemace.c b/drivers/block/systemace.c
index 247cf06..bf29cbb 100644
--- a/drivers/block/systemace.c
+++ b/drivers/block/systemace.c
@@ -65,8 +65,8 @@ static void ace_writew(u16 val, unsigned off)
 		writeb(val, base + off);
 		writeb(val >> 8, base + off + 1);
 #endif
-	}
-	out16(base + off, val);
+	} else
+		out16(base + off, val);
 }
 
 static u16 ace_readw(unsigned off)
@@ -83,7 +83,7 @@ static u16 ace_readw(unsigned off)
 }
 
 static unsigned long systemace_read(int dev, unsigned long start,
-				    unsigned long blkcnt, void *buffer);
+					lbaint_t blkcnt, void *buffer);
 
 static block_dev_desc_t systemace_dev = { 0 };
 
@@ -149,7 +149,7 @@ block_dev_desc_t *systemace_get_dev(int dev)
  * number of blocks read. A zero return indicates an error.
  */
 static unsigned long systemace_read(int dev, unsigned long start,
-				    unsigned long blkcnt, void *buffer)
+					lbaint_t blkcnt, void *buffer)
 {
 	int retry;
 	unsigned blk_countdown;
diff --git a/drivers/i2c/fsl_i2c.c b/drivers/i2c/fsl_i2c.c
index 3cb232f..1c7265d 100644
--- a/drivers/i2c/fsl_i2c.c
+++ b/drivers/i2c/fsl_i2c.c
@@ -217,9 +217,9 @@ static unsigned int set_i2c_bus_speed(const struct fsl_i2c *dev,
 static unsigned int get_i2c_clock(int bus)
 {
 	if (bus)
-		return gd->i2c2_clk;	/* I2C2 clock */
+		return gd->arch.i2c2_clk;	/* I2C2 clock */
 	else
-		return gd->i2c1_clk;	/* I2C1 clock */
+		return gd->arch.i2c1_clk;	/* I2C1 clock */
 }
 
 void
@@ -468,7 +468,8 @@ int i2c_set_bus_num(unsigned int bus)
 
 int i2c_set_bus_speed(unsigned int speed)
 {
-	unsigned int i2c_clk = (i2c_bus_num == 1) ? gd->i2c2_clk : gd->i2c1_clk;
+	unsigned int i2c_clk = (i2c_bus_num == 1)
+			? gd->arch.i2c2_clk : gd->arch.i2c1_clk;
 
 	writeb(0, &i2c_dev[i2c_bus_num]->cr);		/* stop controller */
 	i2c_bus_speed[i2c_bus_num] =
diff --git a/drivers/input/ps2ser.c b/drivers/input/ps2ser.c
index a655a16..bcbe52a 100644
--- a/drivers/input/ps2ser.c
+++ b/drivers/input/ps2ser.c
@@ -80,7 +80,7 @@ int ps2ser_init(void)
 
 	/* select clock sources */
 	psc->psc_clock_select = 0;
-	baseclk = (gd->ipb_clk + 16) / 32;
+	baseclk = (gd->arch.ipb_clk + 16) / 32;
 
 	/* switch to UART mode */
 	psc->sicr = 0;
diff --git a/drivers/mmc/fsl_esdhc.c b/drivers/mmc/fsl_esdhc.c
index 3d5c9c0..b90f3e7 100644
--- a/drivers/mmc/fsl_esdhc.c
+++ b/drivers/mmc/fsl_esdhc.c
@@ -583,7 +583,7 @@ int fsl_esdhc_initialize(bd_t *bis, struct fsl_esdhc_cfg *cfg)
 		mmc->host_caps |= MMC_MODE_HS_52MHz | MMC_MODE_HS;
 
 	mmc->f_min = 400000;
-	mmc->f_max = MIN(gd->sdhc_clk, 52000000);
+	mmc->f_max = MIN(gd->arch.sdhc_clk, 52000000);
 
 	mmc->b_max = 0;
 	mmc_register(mmc);
@@ -598,7 +598,7 @@ int fsl_esdhc_mmc_init(bd_t *bis)
 	cfg = malloc(sizeof(struct fsl_esdhc_cfg));
 	memset(cfg, 0, sizeof(struct fsl_esdhc_cfg));
 	cfg->esdhc_base = CONFIG_SYS_FSL_ESDHC_ADDR;
-	cfg->sdhc_clk = gd->sdhc_clk;
+	cfg->sdhc_clk = gd->arch.sdhc_clk;
 	return fsl_esdhc_initialize(bis, cfg);
 }
 
@@ -616,7 +616,7 @@ void fdt_fixup_esdhc(void *blob, bd_t *bd)
 #endif
 
 	do_fixup_by_compat_u32(blob, compat, "clock-frequency",
-			       gd->sdhc_clk, 1);
+			       gd->arch.sdhc_clk, 1);
 
 	do_fixup_by_compat(blob, compat, "status", "okay",
 			   4 + 1, 1);
diff --git a/drivers/mtd/spi/stmicro.c b/drivers/mtd/spi/stmicro.c
index 30b626a..9ec938a 100644
--- a/drivers/mtd/spi/stmicro.c
+++ b/drivers/mtd/spi/stmicro.c
@@ -93,6 +93,12 @@ static const struct stmicro_spi_flash_params stmicro_spi_flash_table[] = {
 		.name = "M25P128",
 	},
 	{
+		.id = 0xba17,
+		.pages_per_sector = 256,
+		.nr_sectors = 128,
+		.name = "N25Q064",
+	},
+	{
 		.id = 0xba18,
 		.pages_per_sector = 256,
 		.nr_sectors = 256,
diff --git a/drivers/net/fm/Makefile b/drivers/net/fm/Makefile
index 7fbb50a..f191c79 100644
--- a/drivers/net/fm/Makefile
+++ b/drivers/net/fm/Makefile
@@ -46,6 +46,7 @@ COBJS-$(CONFIG_PPC_P4080) += p4080.o
 COBJS-$(CONFIG_PPC_P5020) += p5020.o
 COBJS-$(CONFIG_PPC_P5040) += p5040.o
 COBJS-$(CONFIG_PPC_T4240) += t4240.o
+COBJS-$(CONFIG_PPC_B4420) += b4860.o
 COBJS-$(CONFIG_PPC_B4860) += b4860.o
 endif
 
diff --git a/drivers/net/fm/b4860.c b/drivers/net/fm/b4860.c
new file mode 100644
index 0000000..8cde7af
--- /dev/null
+++ b/drivers/net/fm/b4860.c
@@ -0,0 +1,79 @@
+/*
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ *	Roy Zang <tie-fei.zang@freescale.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#include <common.h>
+#include <phy.h>
+#include <fm_eth.h>
+#include <asm/io.h>
+#include <asm/immap_85xx.h>
+#include <asm/fsl_serdes.h>
+
+u32 port_to_devdisr[] = {
+	[FM1_DTSEC1] = FSL_CORENET_DEVDISR2_DTSEC1_1,
+	[FM1_DTSEC2] = FSL_CORENET_DEVDISR2_DTSEC1_2,
+	[FM1_DTSEC3] = FSL_CORENET_DEVDISR2_DTSEC1_3,
+	[FM1_DTSEC4] = FSL_CORENET_DEVDISR2_DTSEC1_4,
+	[FM1_DTSEC5] = FSL_CORENET_DEVDISR2_DTSEC1_5,
+	[FM1_DTSEC6] = FSL_CORENET_DEVDISR2_DTSEC1_6,
+	[FM1_10GEC1] = FSL_CORENET_DEVDISR2_10GEC1_1,
+	[FM1_10GEC2] = FSL_CORENET_DEVDISR2_10GEC1_2,
+};
+
+static int is_device_disabled(enum fm_port port)
+{
+	ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+	u32 devdisr2 = in_be32(&gur->devdisr2);
+
+	return port_to_devdisr[port] & devdisr2;
+}
+
+void fman_disable_port(enum fm_port port)
+{
+	ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+
+	setbits_be32(&gur->devdisr2, port_to_devdisr[port]);
+}
+
+phy_interface_t fman_port_enet_if(enum fm_port port)
+{
+	if (is_device_disabled(port))
+		return PHY_INTERFACE_MODE_NONE;
+
+	if ((port == FM1_10GEC1 || port == FM1_10GEC2)
+			&& (is_serdes_configured(XAUI_FM1)))
+		return PHY_INTERFACE_MODE_XGMII;
+
+	/* Fix me need to handle RGMII here first */
+
+	switch (port) {
+	case FM1_DTSEC1:
+	case FM1_DTSEC2:
+	case FM1_DTSEC3:
+	case FM1_DTSEC4:
+	case FM1_DTSEC5:
+	case FM1_DTSEC6:
+		if (is_serdes_configured(SGMII_FM1_DTSEC1 + port - FM1_DTSEC1))
+			return PHY_INTERFACE_MODE_SGMII;
+		break;
+	default:
+		return PHY_INTERFACE_MODE_NONE;
+	}
+
+	return PHY_INTERFACE_MODE_NONE;
+}
diff --git a/drivers/net/mpc512x_fec.c b/drivers/net/mpc512x_fec.c
index ad57d56..427e0b8 100644
--- a/drivers/net/mpc512x_fec.c
+++ b/drivers/net/mpc512x_fec.c
@@ -304,7 +304,7 @@ int mpc512x_fec_init_phy (struct eth_device *dev, bd_t * bis)
 		 * and do not drop the Preamble.
 		 */
 		out_be32(&fec->eth->mii_speed,
-			 (((gd->ips_clk / 1000000) / 5) + 1) << 1);
+			 (((gd->arch.ips_clk / 1000000) / 5) + 1) << 1);
 
 		/*
 		 * Reset PHY, then delay 300ns
diff --git a/drivers/net/mpc5xxx_fec.c b/drivers/net/mpc5xxx_fec.c
index 3d180db..1093ba5 100644
--- a/drivers/net/mpc5xxx_fec.c
+++ b/drivers/net/mpc5xxx_fec.c
@@ -440,8 +440,9 @@ static int mpc5xxx_fec_init_phy(struct eth_device *dev, bd_t * bis)
 		/*
 		 * Set MII_SPEED = (1/(mii_speed * 2)) * System Clock
 		 * and do not drop the Preamble.
+		 * No MII for 7-wire mode
 		 */
-		fec->eth->mii_speed = (((gd->ipb_clk >> 20) / 5) << 1);	/* No MII for 7-wire mode */
+		fec->eth->mii_speed = (((gd->arch.ipb_clk >> 20) / 5) << 1);
 	}
 
 	if (fec->xcv_type != SEVENWIRE) {
@@ -644,8 +645,9 @@ static void mpc5xxx_fec_halt(struct eth_device *dev)
 		/*
 		 * Set MII_SPEED = (1/(mii_speed * 2)) * System Clock
 		 * and do not drop the Preamble.
+		 * No MII for 7-wire mode
 		 */
-		fec->eth->mii_speed = (((gd->ipb_clk >> 20) / 5) << 1); /* No MII for 7-wire mode */
+		fec->eth->mii_speed = (((gd->arch.ipb_clk >> 20) / 5) << 1);
 	}
 
 #if (DEBUG & 0x3)
@@ -909,8 +911,9 @@ int mpc5xxx_fec_initialize(bd_t * bis)
 		/*
 		 * Set MII_SPEED = (1/(mii_speed * 2)) * System Clock
 		 * and do not drop the Preamble.
+		 * No MII for 7-wire mode
 		 */
-		fec->eth->mii_speed = (((gd->ipb_clk >> 20) / 5) << 1); /* No MII for 7-wire mode */
+		fec->eth->mii_speed = (((gd->arch.ipb_clk >> 20) / 5) << 1);
 	}
 
 	dev->priv = (void *)fec;
diff --git a/drivers/qe/fdt.c b/drivers/qe/fdt.c
index 73e9060..5a0f277 100644
--- a/drivers/qe/fdt.c
+++ b/drivers/qe/fdt.c
@@ -75,16 +75,16 @@ error:
 void ft_qe_setup(void *blob)
 {
 	do_fixup_by_prop_u32(blob, "device_type", "qe", 4,
-		"bus-frequency", gd->qe_clk, 1);
+		"bus-frequency", gd->arch.qe_clk, 1);
 	do_fixup_by_prop_u32(blob, "device_type", "qe", 4,
-		"brg-frequency", gd->brg_clk, 1);
+		"brg-frequency", gd->arch.brg_clk, 1);
 	do_fixup_by_compat_u32(blob, "fsl,qe",
-		"clock-frequency", gd->qe_clk, 1);
+		"clock-frequency", gd->arch.qe_clk, 1);
 	do_fixup_by_compat_u32(blob, "fsl,qe",
-		"bus-frequency", gd->qe_clk, 1);
+		"bus-frequency", gd->arch.qe_clk, 1);
 	do_fixup_by_compat_u32(blob, "fsl,qe",
-		"brg-frequency", gd->brg_clk, 1);
+		"brg-frequency", gd->arch.brg_clk, 1);
 	do_fixup_by_compat_u32(blob, "fsl,qe-gtm",
-		"clock-frequency", gd->qe_clk / 2, 1);
+		"clock-frequency", gd->arch.qe_clk / 2, 1);
 	fdt_fixup_qe_firmware(blob);
 }
diff --git a/drivers/qe/qe.c b/drivers/qe/qe.c
index 345587b..5fd2135 100644
--- a/drivers/qe/qe.c
+++ b/drivers/qe/qe.c
@@ -58,21 +58,22 @@ uint qe_muram_alloc(uint size, uint align)
 	uint	savebase;
 
 	align_mask = align - 1;
-	savebase = gd->mp_alloc_base;
+	savebase = gd->arch.mp_alloc_base;
 
-	if ((off = (gd->mp_alloc_base & align_mask)) != 0)
-		gd->mp_alloc_base += (align - off);
+	off = gd->arch.mp_alloc_base & align_mask;
+	if (off != 0)
+		gd->arch.mp_alloc_base += (align - off);
 
 	if ((off = size & align_mask) != 0)
 		size += (align - off);
 
-	if ((gd->mp_alloc_base + size) >= gd->mp_alloc_top) {
-		gd->mp_alloc_base = savebase;
+	if ((gd->arch.mp_alloc_base + size) >= gd->arch.mp_alloc_top) {
+		gd->arch.mp_alloc_base = savebase;
 		printf("%s: ran out of ram.\n",  __FUNCTION__);
 	}
 
-	retloc = gd->mp_alloc_base;
-	gd->mp_alloc_base += size;
+	retloc = gd->arch.mp_alloc_base;
+	gd->arch.mp_alloc_base += size;
 
 	memset((void *)&qe_immr->muram[retloc], 0, size);
 
@@ -183,8 +184,8 @@ void qe_init(uint qe_base)
 	out_be32(&qe_immr->iram.iready,QE_IRAM_READY);
 #endif
 
-	gd->mp_alloc_base = QE_DATAONLY_BASE;
-	gd->mp_alloc_top = gd->mp_alloc_base + QE_DATAONLY_SIZE;
+	gd->arch.mp_alloc_base = QE_DATAONLY_BASE;
+	gd->arch.mp_alloc_top = gd->arch.mp_alloc_base + QE_DATAONLY_SIZE;
 
 	qe_sdma_init();
 	qe_snums_init();
@@ -220,7 +221,7 @@ void qe_assign_page(uint snum, uint para_ram_base)
    from CLKn pin, we have te change the function.
  */
 
-#define BRG_CLK		(gd->brg_clk)
+#define BRG_CLK		(gd->arch.brg_clk)
 
 int qe_set_brg(uint brg, uint rate)
 {
diff --git a/drivers/serial/arm_dcc.c b/drivers/serial/arm_dcc.c
index 7b5ecb5..c217c88 100644
--- a/drivers/serial/arm_dcc.c
+++ b/drivers/serial/arm_dcc.c
@@ -89,15 +89,6 @@
 
 #define TIMEOUT_COUNT 0x4000000
 
-#ifndef CONFIG_ARM_DCC_MULTI
-#define arm_dcc_init serial_init
-void serial_setbrg(void) {}
-#define arm_dcc_getc serial_getc
-#define arm_dcc_putc serial_putc
-#define arm_dcc_puts serial_puts
-#define arm_dcc_tstc serial_tstc
-#endif
-
 int arm_dcc_init(void)
 {
 	return 0;
@@ -147,16 +138,10 @@ int arm_dcc_tstc(void)
 	return reg;
 }
 
-#ifdef CONFIG_ARM_DCC_MULTI
 static struct stdio_dev arm_dcc_dev;
 
 int drv_arm_dcc_init(void)
 {
-	int rc;
-
-	/* Device initialization */
-	memset(&arm_dcc_dev, 0, sizeof(arm_dcc_dev));
-
 	strcpy(arm_dcc_dev.name, "dcc");
 	arm_dcc_dev.ext = 0;	/* No extensions */
 	arm_dcc_dev.flags = DEV_FLAGS_INPUT | DEV_FLAGS_OUTPUT;
@@ -167,4 +152,8 @@ int drv_arm_dcc_init(void)
 
 	return stdio_register(&arm_dcc_dev);
 }
-#endif
+
+__weak struct serial_device *default_serial_console(void)
+{
+	return NULL;
+}
diff --git a/drivers/spi/xilinx_spi.c b/drivers/spi/xilinx_spi.c
index 52a4134..db01cc2 100644
--- a/drivers/spi/xilinx_spi.c
+++ b/drivers/spi/xilinx_spi.c
@@ -99,6 +99,8 @@ struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs,
 	debug("%s: bus:%i cs:%i base:%p mode:%x max_hz:%d\n", __func__,
 		bus, cs, xilspi->regs, xilspi->mode, xilspi->freq);
 
+	writel(SPISSR_RESET_VALUE, &xilspi->regs->srr);
+
 	return &xilspi->slave;
 }
 
diff --git a/drivers/spi/xilinx_spi.h b/drivers/spi/xilinx_spi.h
index 32610d2..69d0b94 100644
--- a/drivers/spi/xilinx_spi.h
+++ b/drivers/spi/xilinx_spi.h
@@ -119,6 +119,9 @@ struct xilinx_spi_reg {
 #define SPIRFOR_OCYVAL_POS	0
 #define SPIRFOR_OCYVAL_MASK	(0xf << SPIRFOR_OCYVAL_POS)
 
+/* SPI Software Reset Register (ssr) */
+#define SPISSR_RESET_VALUE	0x0a
+
 struct xilinx_spi_slave {
 	struct spi_slave slave;
 	struct xilinx_spi_reg *regs;
diff --git a/examples/standalone/mem_to_mem_idma2intr.c b/examples/standalone/mem_to_mem_idma2intr.c
index d0a75ea..e466c90 100644
--- a/examples/standalone/mem_to_mem_idma2intr.c
+++ b/examples/standalone/mem_to_mem_idma2intr.c
@@ -356,7 +356,7 @@ uint dpalloc (uint size, uint align)
 	/* Pointer to initial global data area */
 
 	if (dpinit_done == 0) {
-		dpbase = gd->dp_alloc_base;
+		dpbase = gd->arch.dp_alloc_base;
 		dpinit_done = 1;
 	}
 
@@ -369,7 +369,7 @@ uint dpalloc (uint size, uint align)
 	if ((off = size & align_mask) != 0)
 		size += align - off;
 
-	if ((dpbase + size) >= gd->dp_alloc_top) {
+	if ((dpbase + size) >= gd->arch.dp_alloc_top) {
 		dpbase = savebase;
 		printf ("dpalloc: ran out of dual port ram!");
 		return 0;
diff --git a/fs/fat/fat.c b/fs/fat/fat.c
index 393c378..66d5473 100644
--- a/fs/fat/fat.c
+++ b/fs/fat/fat.c
@@ -33,6 +33,13 @@
 #include <part.h>
 #include <malloc.h>
 #include <linux/compiler.h>
+#include <linux/ctype.h>
+
+#ifdef CONFIG_SUPPORT_VFAT
+static const int vfat_enabled = 1;
+#else
+static const int vfat_enabled = 0;
+#endif
 
 /*
  * Convert a string to lowercase.
@@ -40,7 +47,7 @@
 static void downcase(char *str)
 {
 	while (*str != '\0') {
-		TOLOWER(*str);
+		*str = tolower(*str);
 		str++;
 	}
 }
@@ -441,7 +448,6 @@ getit:
 	} while (1);
 }
 
-#ifdef CONFIG_SUPPORT_VFAT
 /*
  * Extract the file name information from 'slotptr' into 'l_name',
  * starting at l_name[*idx].
@@ -569,14 +575,13 @@ static __u8 mkcksum(const char name[8], const char ext[3])
 
 	__u8 ret = 0;
 
-	for (i = 0; i < sizeof(name); i++)
+	for (i = 0; i < 8; i++)
 		ret = (((ret & 1) << 7) | ((ret & 0xfe) >> 1)) + name[i];
-	for (i = 0; i < sizeof(ext); i++)
+	for (i = 0; i < 3; i++)
 		ret = (((ret & 1) << 7) | ((ret & 0xfe) >> 1)) + ext[i];
 
 	return ret;
 }
-#endif	/* CONFIG_SUPPORT_VFAT */
 
 /*
  * Get the directory entry associated with 'filename' from the directory
@@ -617,8 +622,8 @@ static dir_entry *get_dentfromdir(fsdata *mydata, int startsect,
 				continue;
 			}
 			if ((dentptr->attr & ATTR_VOLUME)) {
-#ifdef CONFIG_SUPPORT_VFAT
-				if ((dentptr->attr & ATTR_VFAT) == ATTR_VFAT &&
+				if (vfat_enabled &&
+				    (dentptr->attr & ATTR_VFAT) == ATTR_VFAT &&
 				    (dentptr->name[0] & LAST_LONG_ENTRY_MASK)) {
 					prevcksum = ((dir_slot *)dentptr)->alias_checksum;
 					get_vfatname(mydata, curclust,
@@ -658,9 +663,7 @@ static dir_entry *get_dentfromdir(fsdata *mydata, int startsect,
 						continue;
 					}
 					debug("vfatname: |%s|\n", l_name);
-				} else
-#endif
-				{
+				} else {
 					/* Volume label or VFAT entry */
 					dentptr++;
 					continue;
@@ -674,14 +677,15 @@ static dir_entry *get_dentfromdir(fsdata *mydata, int startsect,
 				debug("Dentname == NULL - %d\n", i);
 				return NULL;
 			}
-#ifdef CONFIG_SUPPORT_VFAT
-			__u8 csum = mkcksum(dentptr->name, dentptr->ext);
-			if (dols && csum == prevcksum) {
-				prevcksum = 0xffff;
-				dentptr++;
-				continue;
+			if (vfat_enabled) {
+				__u8 csum = mkcksum(dentptr->name, dentptr->ext);
+				if (dols && csum == prevcksum) {
+					prevcksum = 0xffff;
+					dentptr++;
+					continue;
+				}
 			}
-#endif
+
 			get_name(dentptr, s_name);
 			if (dols) {
 				int isdir = (dentptr->attr & ATTR_DIR);
@@ -884,9 +888,9 @@ do_fat_read_at(const char *filename, unsigned long pos, void *buffer,
 		return -1;
 	}
 
-#ifdef CONFIG_SUPPORT_VFAT
-	debug("VFAT Support enabled\n");
-#endif
+	if (vfat_enabled)
+		debug("VFAT Support enabled\n");
+
 	debug("FAT%d, fat_sect: %d, fatlength: %d\n",
 	       mydata->fatsize, mydata->fat_sect, mydata->fatlength);
 	debug("Rootdir begins at cluster: %d, sector: %d, offset: %x\n"
@@ -952,10 +956,12 @@ do_fat_read_at(const char *filename, unsigned long pos, void *buffer,
 				continue;
 			}
 
-			csum = mkcksum(dentptr->name, dentptr->ext);
+			if (vfat_enabled)
+				csum = mkcksum(dentptr->name, dentptr->ext);
+
 			if (dentptr->attr & ATTR_VOLUME) {
-#ifdef CONFIG_SUPPORT_VFAT
-				if ((dentptr->attr & ATTR_VFAT) == ATTR_VFAT &&
+				if (vfat_enabled &&
+				    (dentptr->attr & ATTR_VFAT) == ATTR_VFAT &&
 				    (dentptr->name[0] & LAST_LONG_ENTRY_MASK)) {
 					prevcksum =
 						((dir_slot *)dentptr)->alias_checksum;
@@ -999,9 +1005,7 @@ do_fat_read_at(const char *filename, unsigned long pos, void *buffer,
 					}
 					debug("Rootvfatname: |%s|\n",
 					       l_name);
-				} else
-#endif
-				{
+				} else {
 					/* Volume label or VFAT entry */
 					dentptr++;
 					continue;
@@ -1015,13 +1019,13 @@ do_fat_read_at(const char *filename, unsigned long pos, void *buffer,
 				}
 				goto exit;
 			}
-#ifdef CONFIG_SUPPORT_VFAT
-			else if (dols == LS_ROOT && csum == prevcksum) {
+			else if (vfat_enabled &&
+				 dols == LS_ROOT && csum == prevcksum) {
 				prevcksum = 0xffff;
 				dentptr++;
 				continue;
 			}
-#endif
+
 			get_name(dentptr, s_name);
 
 			if (dols == LS_ROOT) {
diff --git a/fs/fat/fat_write.c b/fs/fat/fat_write.c
index 4a1bda0..b4022aa 100644
--- a/fs/fat/fat_write.c
+++ b/fs/fat/fat_write.c
@@ -28,6 +28,7 @@
 #include <fat.h>
 #include <asm/byteorder.h>
 #include <part.h>
+#include <linux/ctype.h>
 #include "fat.c"
 
 static void uppercase(char *str, int len)
@@ -35,7 +36,7 @@ static void uppercase(char *str, int len)
 	int i;
 
 	for (i = 0; i < len; i++) {
-		TOUPPER(*str);
+		*str = toupper(*str);
 		str++;
 	}
 }
@@ -248,7 +249,6 @@ static __u32 get_fatent_value(fsdata *mydata, __u32 entry)
 	return ret;
 }
 
-#ifdef CONFIG_SUPPORT_VFAT
 /*
  * Set the file name information from 'name' into 'slotptr',
  */
@@ -468,8 +468,6 @@ get_long_file_name(fsdata *mydata, int curclust, __u8 *cluster,
 	return 0;
 }
 
-#endif
-
 /*
  * Set the entry at index 'entry' in a FAT (16/32) table.
  */
@@ -853,16 +851,14 @@ static dir_entry *find_directory_entry(fsdata *mydata, int startsect,
 				continue;
 			}
 			if ((dentptr->attr & ATTR_VOLUME)) {
-#ifdef CONFIG_SUPPORT_VFAT
-				if ((dentptr->attr & ATTR_VFAT) &&
+				if (vfat_enabled &&
+				    (dentptr->attr & ATTR_VFAT) &&
 				    (dentptr->name[0] & LAST_LONG_ENTRY_MASK)) {
 					get_long_file_name(mydata, curclust,
 						     get_dentfromdir_block,
 						     &dentptr, l_name);
 					debug("vfatname: |%s|\n", l_name);
-				} else
-#endif
-				{
+				} else {
 					/* Volume label or VFAT entry */
 					dentptr++;
 					if (is_next_clust(mydata, dentptr))
diff --git a/include/asm-generic/global_data.h b/include/asm-generic/global_data.h
new file mode 100644
index 0000000..b8ac024
--- /dev/null
+++ b/include/asm-generic/global_data.h
@@ -0,0 +1,102 @@
+/*
+ * Copyright (c) 2012 The Chromium OS Authors.
+ * (C) Copyright 2002-2010
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __ASM_GENERIC_GBL_DATA_H
+#define __ASM_GENERIC_GBL_DATA_H
+/*
+ * The following data structure is placed in some memory which is
+ * available very early after boot (like DPRAM on MPC8xx/MPC82xx, or
+ * some locked parts of the data cache) to allow for a minimum set of
+ * global variables during system initialization (until we have set
+ * up the memory controller so that we can use RAM).
+ *
+ * Keep it *SMALL* and remember to set GENERATED_GBL_DATA_SIZE > sizeof(gd_t)
+ *
+ * Each architecture has its own private fields. For now all are private
+ */
+
+#ifndef __ASSEMBLY__
+typedef struct global_data {
+	bd_t *bd;
+	unsigned long flags;
+	unsigned long baudrate;
+	unsigned long cpu_clk;	/* CPU clock in Hz!		*/
+	unsigned long bus_clk;
+	/* We cannot bracket this with CONFIG_PCI due to mpc5xxx */
+	unsigned long pci_clk;
+	unsigned long mem_clk;
+#if defined(CONFIG_LCD) || defined(CONFIG_VIDEO)
+	unsigned long fb_base;	/* Base address of framebuffer mem */
+#endif
+#if defined(CONFIG_POST) || defined(CONFIG_LOGBUFFER)
+	unsigned long post_log_word;  /* Record POST activities */
+	unsigned long post_log_res; /* success of POST test */
+	unsigned long post_init_f_time;  /* When post_init_f started */
+#endif
+#ifdef CONFIG_BOARD_TYPES
+	unsigned long board_type;
+#endif
+	unsigned long have_console;	/* serial_init() was called */
+#ifdef CONFIG_PRE_CONSOLE_BUFFER
+	unsigned long precon_buf_idx;	/* Pre-Console buffer index */
+#endif
+#ifdef CONFIG_MODEM_SUPPORT
+	unsigned long do_mdm_init;
+	unsigned long be_quiet;
+#endif
+	unsigned long env_addr;	/* Address  of Environment struct */
+	unsigned long env_valid;	/* Checksum of Environment valid? */
+
+	/* TODO: is this the same as relocaddr, or something else? */
+	unsigned long dest_addr;	/* Post-relocation address of U-Boot */
+	unsigned long dest_addr_sp;
+	unsigned long ram_top;	/* Top address of RAM used by U-Boot */
+
+	unsigned long relocaddr;	/* Start address of U-Boot in RAM */
+	phys_size_t ram_size;	/* RAM size */
+	unsigned long mon_len;	/* monitor len */
+	unsigned long irq_sp;		/* irq stack pointer */
+	unsigned long start_addr_sp;	/* start_addr_stackpointer */
+	unsigned long reloc_off;
+	struct global_data *new_gd;	/* relocated global data */
+	const void *fdt_blob;	/* Our device tree, NULL if none */
+	void **jt;		/* jump table */
+	char env_buf[32];	/* buffer for getenv() before reloc. */
+	struct arch_global_data arch;	/* architecture-specific data */
+} gd_t;
+#endif
+
+/*
+ * Global Data Flags
+ */
+#define GD_FLG_RELOC		0x00001	/* Code was relocated to RAM	   */
+#define GD_FLG_DEVINIT		0x00002	/* Devices have been initialized   */
+#define GD_FLG_SILENT		0x00004	/* Silent mode			   */
+#define GD_FLG_POSTFAIL		0x00008	/* Critical POST test failed	   */
+#define GD_FLG_POSTSTOP		0x00010	/* POST seqeunce aborted	   */
+#define GD_FLG_LOGINIT		0x00020	/* Log Buffer has been initialized */
+#define GD_FLG_DISABLE_CONSOLE	0x00040	/* Disable console (in & out)	   */
+#define GD_FLG_ENV_READY	0x00080	/* Env. imported into hash table   */
+
+#endif /* __ASM_GENERIC_GBL_DATA_H */
diff --git a/include/command.h b/include/command.h
index 476e7cf..3785eb9 100644
--- a/include/command.h
+++ b/include/command.h
@@ -139,10 +139,12 @@ enum command_ret_t {
  * @param repeatable	This function sets this to 0 if the command is not
  *			repeatable. If the command is repeatable, the value
  *			is left unchanged.
+ * @param ticks		If ticks is not null, this function set it to the
+ *			number of ticks the command took to complete.
  * @return 0 if the command succeeded, 1 if it failed
  */
 int cmd_process(int flag, int argc, char * const argv[],
-			       int *repeatable);
+			       int *repeatable, unsigned long *ticks);
 
 #endif	/* __ASSEMBLY__ */
 
diff --git a/include/configs/B4860QDS.h b/include/configs/B4860QDS.h
new file mode 100644
index 0000000..b09119a
--- /dev/null
+++ b/include/configs/B4860QDS.h
@@ -0,0 +1,820 @@
+/*
+ * Copyright 2011-2012 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*
+ * B4860 QDS board configuration file
+ */
+#define CONFIG_B4860QDS
+#define CONFIG_PHYS_64BIT
+
+#ifdef CONFIG_RAMBOOT_PBL
+#define CONFIG_RAMBOOT_TEXT_BASE	CONFIG_SYS_TEXT_BASE
+#define CONFIG_RESET_VECTOR_ADDRESS	0xfffffffc
+#endif
+
+/* High Level Configuration Options */
+#define CONFIG_BOOKE
+#define CONFIG_E6500
+#define CONFIG_E500			/* BOOKE e500 family */
+#define CONFIG_E500MC			/* BOOKE e500mc family */
+#define CONFIG_SYS_BOOK3E_HV		/* Category E.HV supported */
+#define CONFIG_MPC85xx			/* MPC85xx/PQ3 platform */
+#define CONFIG_FSL_CORENET		/* Freescale CoreNet platform */
+#define CONFIG_MP			/* support multiple processors */
+
+#ifndef CONFIG_SYS_TEXT_BASE
+#define CONFIG_SYS_TEXT_BASE	0xeff80000
+#endif
+
+#ifndef CONFIG_RESET_VECTOR_ADDRESS
+#define CONFIG_RESET_VECTOR_ADDRESS	0xeffffffc
+#endif
+
+#define CONFIG_SYS_FSL_CPC		/* Corenet Platform Cache */
+#define CONFIG_SYS_NUM_CPC		CONFIG_NUM_DDR_CONTROLLERS
+#define CONFIG_FSL_IFC			/* Enable IFC Support */
+#define CONFIG_PCI			/* Enable PCI/PCIE */
+#define CONFIG_PCIE1			/* PCIE controler 1 */
+#define CONFIG_FSL_PCI_INIT		/* Use common FSL init code */
+#define CONFIG_SYS_PCI_64BIT		/* enable 64-bit PCI resources */
+
+#ifndef CONFIG_PPC_B4420
+#define CONFIG_SYS_SRIO
+#define CONFIG_SRIO1			/* SRIO port 1 */
+#define CONFIG_SRIO2			/* SRIO port 2 */
+#endif
+
+#define CONFIG_FSL_LAW			/* Use common FSL init code */
+
+/* I2C bus multiplexer */
+#define I2C_MUX_PCA_ADDR                0x77
+
+/* VSC Crossbar switches */
+#define CONFIG_VSC_CROSSBAR
+#define I2C_CH_DEFAULT                  0x8
+#define I2C_CH_VSC3316                  0xc
+#define I2C_CH_VSC3308                  0xd
+
+#define VSC3316_TX_ADDRESS              0x70
+#define VSC3316_RX_ADDRESS              0x71
+#define VSC3308_TX_ADDRESS              0x02
+#define VSC3308_RX_ADDRESS              0x03
+
+#define CONFIG_ENV_OVERWRITE
+
+#ifdef CONFIG_SYS_NO_FLASH
+#define CONFIG_ENV_IS_NOWHERE
+#else
+#define CONFIG_FLASH_CFI_DRIVER
+#define CONFIG_SYS_FLASH_CFI
+#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
+#endif
+
+#ifndef CONFIG_SYS_NO_FLASH
+#if defined(CONFIG_SPIFLASH)
+#define CONFIG_SYS_EXTRA_ENV_RELOC
+#define CONFIG_ENV_IS_IN_SPI_FLASH
+#define CONFIG_ENV_SPI_BUS              0
+#define CONFIG_ENV_SPI_CS               0
+#define CONFIG_ENV_SPI_MAX_HZ           10000000
+#define CONFIG_ENV_SPI_MODE             0
+#define CONFIG_ENV_SIZE                 0x2000          /* 8KB */
+#define CONFIG_ENV_OFFSET               0x100000        /* 1MB */
+#define CONFIG_ENV_SECT_SIZE            0x10000
+#elif defined(CONFIG_SDCARD)
+#define CONFIG_SYS_EXTRA_ENV_RELOC
+#define CONFIG_ENV_IS_IN_MMC
+#define CONFIG_SYS_MMC_ENV_DEV          0
+#define CONFIG_ENV_SIZE			0x2000
+#define CONFIG_ENV_OFFSET		(512 * 1097)
+#elif defined(CONFIG_NAND)
+#define CONFIG_SYS_EXTRA_ENV_RELOC
+#define CONFIG_ENV_IS_IN_NAND
+#define CONFIG_ENV_SIZE			CONFIG_SYS_NAND_BLOCK_SIZE
+#define CONFIG_ENV_OFFSET		(5 * CONFIG_SYS_NAND_BLOCK_SIZE)
+#else
+#define CONFIG_ENV_IS_IN_FLASH
+#define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
+#define CONFIG_ENV_SIZE		0x2000
+#define CONFIG_ENV_SECT_SIZE	0x20000 /* 128K (one sector) */
+#endif
+#else /* CONFIG_SYS_NO_FLASH */
+#define CONFIG_ENV_SIZE                0x2000
+#define CONFIG_ENV_SECT_SIZE   0x20000 /* 128K (one sector) */
+#endif
+
+#ifndef __ASSEMBLY__
+unsigned long get_board_sys_clk(void);
+unsigned long get_board_ddr_clk(void);
+#endif
+#define CONFIG_SYS_CLK_FREQ	get_board_sys_clk() /* sysclk for MPC85xx */
+#define CONFIG_DDR_CLK_FREQ	get_board_ddr_clk()
+
+/*
+ * These can be toggled for performance analysis, otherwise use default.
+ */
+#define CONFIG_SYS_CACHE_STASHING
+#define CONFIG_BTB			/* toggle branch predition */
+#define CONFIG_DDR_ECC
+#ifdef CONFIG_DDR_ECC
+#define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
+#define CONFIG_MEM_INIT_VALUE		0xdeadbeef
+#endif
+
+#define CONFIG_ENABLE_36BIT_PHYS
+
+#ifdef CONFIG_PHYS_64BIT
+#define CONFIG_ADDR_MAP
+#define CONFIG_SYS_NUM_ADDR_MAP		64	/* number of TLB1 entries */
+#endif
+
+#if 0
+#define CONFIG_POST CONFIG_SYS_POST_MEMORY	/* test POST memory test */
+#endif
+#define CONFIG_SYS_MEMTEST_START	0x00200000	/* memtest works on */
+#define CONFIG_SYS_MEMTEST_END		0x00400000
+#define CONFIG_SYS_ALT_MEMTEST
+#define CONFIG_PANIC_HANG	/* do not reset board on panic */
+
+/*
+ *  Config the L3 Cache as L3 SRAM
+ */
+#define CONFIG_SYS_INIT_L3_ADDR		CONFIG_RAMBOOT_TEXT_BASE
+
+#ifdef CONFIG_PHYS_64BIT
+#define CONFIG_SYS_DCSRBAR		0xf0000000
+#define CONFIG_SYS_DCSRBAR_PHYS		0xf00000000ull
+#endif
+
+/* EEPROM */
+#define CONFIG_SYS_I2C_EEPROM_NXID
+#define CONFIG_SYS_EEPROM_BUS_NUM	0
+#define CONFIG_SYS_I2C_EEPROM_ADDR	0x57
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN	1
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5
+
+/*
+ * DDR Setup
+ */
+#define CONFIG_VERY_BIG_RAM
+#define CONFIG_SYS_DDR_SDRAM_BASE	0x00000000
+#define CONFIG_SYS_SDRAM_BASE		CONFIG_SYS_DDR_SDRAM_BASE
+
+/* CONFIG_NUM_DDR_CONTROLLERS is defined in include/asm/config_mpc85xx.h */
+#define CONFIG_DIMM_SLOTS_PER_CTLR	1
+#define CONFIG_CHIP_SELECTS_PER_CTRL	(4 * CONFIG_DIMM_SLOTS_PER_CTLR)
+
+#define CONFIG_DDR_SPD
+#define CONFIG_SYS_DDR_RAW_TIMING
+#define CONFIG_FSL_DDR3
+#define CONFIG_FSL_DDR_INTERACTIVE
+
+#define CONFIG_SYS_SPD_BUS_NUM	0
+#define SPD_EEPROM_ADDRESS1	0x51
+#define SPD_EEPROM_ADDRESS2	0x53
+
+#define SPD_EEPROM_ADDRESS	SPD_EEPROM_ADDRESS1
+#define CONFIG_SYS_SDRAM_SIZE	2048	/* for fixed parameter use */
+
+/*
+ * IFC Definitions
+ */
+#define CONFIG_SYS_FLASH_BASE	0xe0000000
+#ifdef CONFIG_PHYS_64BIT
+#define CONFIG_SYS_FLASH_BASE_PHYS	(0xf00000000ull | CONFIG_SYS_FLASH_BASE)
+#else
+#define CONFIG_SYS_FLASH_BASE_PHYS	CONFIG_SYS_FLASH_BASE
+#endif
+
+#define CONFIG_SYS_NOR0_CSPR_EXT	(0xf)
+#define CONFIG_SYS_NOR0_CSPR	(CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS \
+				+ 0x8000000) | \
+				CSPR_PORT_SIZE_16 | \
+				CSPR_MSEL_NOR | \
+				CSPR_V)
+#define CONFIG_SYS_NOR1_CSPR_EXT	(0xf)
+#define CONFIG_SYS_NOR1_CSPR	(CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \
+				CSPR_PORT_SIZE_16 | \
+				CSPR_MSEL_NOR | \
+				CSPR_V)
+#define CONFIG_SYS_NOR_AMASK	IFC_AMASK(128 * 1024 * 1024)
+/* NOR Flash Timing Params */
+#define CONFIG_SYS_NOR_CSOR	CSOR_NOR_ADM_SHIFT(4)
+#define CONFIG_SYS_NOR_FTIM0	(FTIM0_NOR_TACSE(0x01) | \
+				FTIM0_NOR_TEADC(0x01) | \
+				FTIM0_NOR_TEAHC(0x20))
+#define CONFIG_SYS_NOR_FTIM1	(FTIM1_NOR_TACO(0x35) | \
+				FTIM1_NOR_TRAD_NOR(0x1A) |\
+				FTIM1_NOR_TSEQRAD_NOR(0x13))
+#define CONFIG_SYS_NOR_FTIM2	(FTIM2_NOR_TCS(0x01) | \
+				FTIM2_NOR_TCH(0x0E) | \
+				FTIM2_NOR_TWPH(0x0E) | \
+				FTIM2_NOR_TWP(0x1c))
+#define CONFIG_SYS_NOR_FTIM3	0x0
+
+#define CONFIG_SYS_FLASH_QUIET_TEST
+#define CONFIG_FLASH_SHOW_PROGRESS	45 /* count down from 45/5: 9..1 */
+
+#define CONFIG_SYS_MAX_FLASH_BANKS	2	/* number of banks */
+#define CONFIG_SYS_MAX_FLASH_SECT	1024	/* sectors per device */
+#define CONFIG_SYS_FLASH_ERASE_TOUT	60000	/* Flash Erase Timeout (ms) */
+#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (ms) */
+
+#define CONFIG_SYS_FLASH_EMPTY_INFO
+#define CONFIG_SYS_FLASH_BANKS_LIST	{CONFIG_SYS_FLASH_BASE_PHYS \
+					+ 0x8000000, CONFIG_SYS_FLASH_BASE_PHYS}
+
+#define CONFIG_FSL_QIXIS	/* use common QIXIS code */
+#define CONFIG_FSL_QIXIS_V2
+#define QIXIS_BASE		0xffdf0000
+#ifdef CONFIG_PHYS_64BIT
+#define QIXIS_BASE_PHYS		(0xf00000000ull | QIXIS_BASE)
+#else
+#define QIXIS_BASE_PHYS		QIXIS_BASE
+#endif
+#define QIXIS_LBMAP_SWITCH		0x01
+#define QIXIS_LBMAP_MASK		0x0f
+#define QIXIS_LBMAP_SHIFT		0
+#define QIXIS_LBMAP_DFLTBANK		0x00
+#define QIXIS_LBMAP_ALTBANK		0x02
+#define QIXIS_RST_CTL_RESET		0x31
+#define QIXIS_RCFG_CTL_RECONFIG_IDLE	0x20
+#define QIXIS_RCFG_CTL_RECONFIG_START	0x21
+#define QIXIS_RCFG_CTL_WATCHDOG_ENBLE	0x08
+
+#define CONFIG_SYS_CSPR3_EXT	(0xf)
+#define CONFIG_SYS_CSPR3	(CSPR_PHYS_ADDR(QIXIS_BASE_PHYS) \
+				| CSPR_PORT_SIZE_8 \
+				| CSPR_MSEL_GPCM \
+				| CSPR_V)
+#define CONFIG_SYS_AMASK3	IFC_AMASK(4 * 1024)
+#define CONFIG_SYS_CSOR3	0x0
+/* QIXIS Timing parameters for IFC CS3 */
+#define CONFIG_SYS_CS3_FTIM0		(FTIM0_GPCM_TACSE(0x0e) | \
+					FTIM0_GPCM_TEADC(0x0e) | \
+					FTIM0_GPCM_TEAHC(0x0e))
+#define CONFIG_SYS_CS3_FTIM1		(FTIM1_GPCM_TACO(0x0e) | \
+					FTIM1_GPCM_TRAD(0x1f))
+#define CONFIG_SYS_CS3_FTIM2		(FTIM2_GPCM_TCS(0x0e) | \
+					FTIM2_GPCM_TCH(0x0) | \
+					FTIM2_GPCM_TWP(0x1f))
+#define CONFIG_SYS_CS3_FTIM3		0x0
+
+/* NAND Flash on IFC */
+#define CONFIG_NAND_FSL_IFC
+#define CONFIG_SYS_NAND_BASE		0xff800000
+#ifdef CONFIG_PHYS_64BIT
+#define CONFIG_SYS_NAND_BASE_PHYS	(0xf00000000ull | CONFIG_SYS_NAND_BASE)
+#else
+#define CONFIG_SYS_NAND_BASE_PHYS	CONFIG_SYS_NAND_BASE
+#endif
+
+#define CONFIG_SYS_NAND_CSPR_EXT	(0xf)
+#define CONFIG_SYS_NAND_CSPR	(CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
+				| CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \
+				| CSPR_MSEL_NAND	/* MSEL = NAND */ \
+				| CSPR_V)
+#define CONFIG_SYS_NAND_AMASK	IFC_AMASK(64 * 1024)
+
+#define CONFIG_SYS_NAND_CSOR    (CSOR_NAND_ECC_ENC_EN   /* ECC on encode */ \
+				| CSOR_NAND_ECC_DEC_EN  /* ECC on decode */ \
+				| CSOR_NAND_ECC_MODE_4  /* 4-bit ECC */ \
+				| CSOR_NAND_RAL_3	/* RAL = 2Byes */ \
+				| CSOR_NAND_PGS_2K	/* Page Size = 2K */ \
+				| CSOR_NAND_SPRZ_64/* Spare size = 64 */ \
+				| CSOR_NAND_PB(64))	/*Pages Per Block = 64*/
+
+#define CONFIG_SYS_NAND_ONFI_DETECTION
+
+/* ONFI NAND Flash mode0 Timing Params */
+#define CONFIG_SYS_NAND_FTIM0		(FTIM0_NAND_TCCST(0x07) | \
+					FTIM0_NAND_TWP(0x18)   | \
+					FTIM0_NAND_TWCHT(0x07) | \
+					FTIM0_NAND_TWH(0x0a))
+#define CONFIG_SYS_NAND_FTIM1		(FTIM1_NAND_TADLE(0x32) | \
+					FTIM1_NAND_TWBE(0x39)  | \
+					FTIM1_NAND_TRR(0x0e)   | \
+					FTIM1_NAND_TRP(0x18))
+#define CONFIG_SYS_NAND_FTIM2		(FTIM2_NAND_TRAD(0x0f) | \
+					FTIM2_NAND_TREH(0x0a) | \
+					FTIM2_NAND_TWHRE(0x1e))
+#define CONFIG_SYS_NAND_FTIM3		0x0
+
+#define CONFIG_SYS_NAND_DDR_LAW		11
+
+#define CONFIG_SYS_NAND_BASE_LIST	{ CONFIG_SYS_NAND_BASE }
+#define CONFIG_SYS_MAX_NAND_DEVICE	1
+#define CONFIG_MTD_NAND_VERIFY_WRITE
+#define CONFIG_CMD_NAND
+
+#define CONFIG_SYS_NAND_BLOCK_SIZE	(128 * 1024)
+
+#if defined(CONFIG_NAND)
+#define CONFIG_SYS_CSPR0_EXT		CONFIG_SYS_NAND_CSPR_EXT
+#define CONFIG_SYS_CSPR0		CONFIG_SYS_NAND_CSPR
+#define CONFIG_SYS_AMASK0		CONFIG_SYS_NAND_AMASK
+#define CONFIG_SYS_CSOR0		CONFIG_SYS_NAND_CSOR
+#define CONFIG_SYS_CS0_FTIM0		CONFIG_SYS_NAND_FTIM0
+#define CONFIG_SYS_CS0_FTIM1		CONFIG_SYS_NAND_FTIM1
+#define CONFIG_SYS_CS0_FTIM2		CONFIG_SYS_NAND_FTIM2
+#define CONFIG_SYS_CS0_FTIM3		CONFIG_SYS_NAND_FTIM3
+#define CONFIG_SYS_CSPR2_EXT		CONFIG_SYS_NOR0_CSPR_EXT
+#define CONFIG_SYS_CSPR2		CONFIG_SYS_NOR0_CSPR
+#define CONFIG_SYS_AMASK2		CONFIG_SYS_NOR_AMASK
+#define CONFIG_SYS_CSOR2		CONFIG_SYS_NOR_CSOR
+#define CONFIG_SYS_CS2_FTIM0		CONFIG_SYS_NOR_FTIM0
+#define CONFIG_SYS_CS2_FTIM1		CONFIG_SYS_NOR_FTIM1
+#define CONFIG_SYS_CS2_FTIM2		CONFIG_SYS_NOR_FTIM2
+#define CONFIG_SYS_CS2_FTIM3		CONFIG_SYS_NOR_FTIM3
+#else
+#define CONFIG_SYS_CSPR0_EXT		CONFIG_SYS_NOR0_CSPR_EXT
+#define CONFIG_SYS_CSPR0		CONFIG_SYS_NOR0_CSPR
+#define CONFIG_SYS_AMASK0		CONFIG_SYS_NOR_AMASK
+#define CONFIG_SYS_CSOR0		CONFIG_SYS_NOR_CSOR
+#define CONFIG_SYS_CS0_FTIM0		CONFIG_SYS_NOR_FTIM0
+#define CONFIG_SYS_CS0_FTIM1		CONFIG_SYS_NOR_FTIM1
+#define CONFIG_SYS_CS0_FTIM2		CONFIG_SYS_NOR_FTIM2
+#define CONFIG_SYS_CS0_FTIM3		CONFIG_SYS_NOR_FTIM3
+#define CONFIG_SYS_CSPR2_EXT		CONFIG_SYS_NAND_CSPR_EXT
+#define CONFIG_SYS_CSPR2		CONFIG_SYS_NAND_CSPR
+#define CONFIG_SYS_AMASK2		CONFIG_SYS_NAND_AMASK
+#define CONFIG_SYS_CSOR2		CONFIG_SYS_NAND_CSOR
+#define CONFIG_SYS_CS2_FTIM0		CONFIG_SYS_NAND_FTIM0
+#define CONFIG_SYS_CS2_FTIM1		CONFIG_SYS_NAND_FTIM1
+#define CONFIG_SYS_CS2_FTIM2		CONFIG_SYS_NAND_FTIM2
+#define CONFIG_SYS_CS2_FTIM3		CONFIG_SYS_NAND_FTIM3
+#endif
+#define CONFIG_SYS_CSPR1_EXT		CONFIG_SYS_NOR1_CSPR_EXT
+#define CONFIG_SYS_CSPR1		CONFIG_SYS_NOR1_CSPR
+#define CONFIG_SYS_AMASK1		CONFIG_SYS_NOR_AMASK
+#define CONFIG_SYS_CSOR1		CONFIG_SYS_NOR_CSOR
+#define CONFIG_SYS_CS1_FTIM0		CONFIG_SYS_NOR_FTIM0
+#define CONFIG_SYS_CS1_FTIM1		CONFIG_SYS_NOR_FTIM1
+#define CONFIG_SYS_CS1_FTIM2		CONFIG_SYS_NOR_FTIM2
+#define CONFIG_SYS_CS1_FTIM3		CONFIG_SYS_NOR_FTIM3
+
+#define CONFIG_SYS_MONITOR_BASE		CONFIG_SYS_TEXT_BASE
+
+#if defined(CONFIG_RAMBOOT_PBL)
+#define CONFIG_SYS_RAMBOOT
+#endif
+
+#define CONFIG_BOARD_EARLY_INIT_R
+#define CONFIG_MISC_INIT_R
+
+#define CONFIG_HWCONFIG
+
+/* define to use L1 as initial stack */
+#define CONFIG_L1_INIT_RAM
+#define CONFIG_SYS_INIT_RAM_LOCK
+#define CONFIG_SYS_INIT_RAM_ADDR	0xfdd00000	/* Initial L1 address */
+#ifdef CONFIG_PHYS_64BIT
+#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH	0xf
+#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW	0xfe0ec000
+/* The assembler doesn't like typecast */
+#define CONFIG_SYS_INIT_RAM_ADDR_PHYS \
+	((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \
+	  CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW)
+#else
+#define CONFIG_SYS_INIT_RAM_ADDR_PHYS	0xfe0ec000 /* Initial L1 address */
+#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0
+#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR_PHYS
+#endif
+#define CONFIG_SYS_INIT_RAM_SIZE		0x00004000
+
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE - \
+					GENERATED_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
+
+#define CONFIG_SYS_MONITOR_LEN		(512 * 1024)
+#define CONFIG_SYS_MALLOC_LEN		(4 * 1024 * 1024)
+
+/* Serial Port - controlled on board with jumper J8
+ * open - index 2
+ * shorted - index 1
+ */
+#define CONFIG_CONS_INDEX	1
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_REG_SIZE	1
+#define CONFIG_SYS_NS16550_CLK		(get_bus_freq(0)/2)
+
+#define CONFIG_SYS_BAUDRATE_TABLE	\
+	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
+
+#define CONFIG_SYS_NS16550_COM1	(CONFIG_SYS_CCSRBAR+0x11C500)
+#define CONFIG_SYS_NS16550_COM2	(CONFIG_SYS_CCSRBAR+0x11C600)
+#define CONFIG_SYS_NS16550_COM3	(CONFIG_SYS_CCSRBAR+0x11D500)
+#define CONFIG_SYS_NS16550_COM4	(CONFIG_SYS_CCSRBAR+0x11D600)
+#define CONFIG_SERIAL_MULTI		/* Enable both serial ports */
+#define CONFIG_SYS_CONSOLE_IS_IN_ENV	/* determine from environment */
+
+
+/* Use the HUSH parser */
+#define CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
+
+/* pass open firmware flat tree */
+#define CONFIG_OF_LIBFDT
+#define CONFIG_OF_BOARD_SETUP
+#define CONFIG_OF_STDOUT_VIA_ALIAS
+
+/* new uImage format support */
+#define CONFIG_FIT
+#define CONFIG_FIT_VERBOSE	/* enable fit_format_{error,warning}() */
+
+/* I2C */
+#define CONFIG_FSL_I2C		/* Use FSL common I2C driver */
+#define CONFIG_HARD_I2C		/* I2C with hardware support */
+#define CONFIG_I2C_MULTI_BUS
+#define CONFIG_I2C_CMD_TREE
+#define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed in Hz */
+#define CONFIG_SYS_I2C_SLAVE		0x7F
+#define CONFIG_SYS_I2C_OFFSET		0x118000
+#define CONFIG_SYS_I2C2_OFFSET		0x119000
+
+/*
+ * RTC configuration
+ */
+#define RTC
+#define CONFIG_RTC_DS3231               1
+#define CONFIG_SYS_I2C_RTC_ADDR         0x68
+
+/*
+ * RapidIO
+ */
+#ifdef CONFIG_SYS_SRIO
+#ifdef CONFIG_SRIO1
+#define CONFIG_SYS_SRIO1_MEM_VIRT	0xa0000000
+#ifdef CONFIG_PHYS_64BIT
+#define CONFIG_SYS_SRIO1_MEM_PHYS	0xc20000000ull
+#else
+#define CONFIG_SYS_SRIO1_MEM_PHYS	0xa0000000
+#endif
+#define CONFIG_SYS_SRIO1_MEM_SIZE	0x10000000	/* 256M */
+#endif
+
+#ifdef CONFIG_SRIO2
+#define CONFIG_SYS_SRIO2_MEM_VIRT	0xb0000000
+#ifdef CONFIG_PHYS_64BIT
+#define CONFIG_SYS_SRIO2_MEM_PHYS	0xc30000000ull
+#else
+#define CONFIG_SYS_SRIO2_MEM_PHYS	0xb0000000
+#endif
+#define CONFIG_SYS_SRIO2_MEM_SIZE	0x10000000	/* 256M */
+#endif
+#endif
+
+/*
+ * for slave u-boot IMAGE instored in master memory space,
+ * PHYS must be aligned based on the SIZE
+ */
+#define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS 0xfef080000ull
+#define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS1 0xfff80000ull
+#define CONFIG_SRIO_PCIE_BOOT_IMAGE_SIZE 0x80000	/* 512K */
+#define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS2 0x3fff80000ull
+/*
+ * for slave UCODE and ENV instored in master memory space,
+ * PHYS must be aligned based on the SIZE
+ */
+#define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_PHYS 0xfef040000ull
+#define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_BUS 0x3ffe00000ull
+#define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_SIZE 0x40000	/* 256K */
+
+/* slave core release by master*/
+#define CONFIG_SRIO_PCIE_BOOT_BRR_OFFSET 0xe00e4
+#define CONFIG_SRIO_PCIE_BOOT_RELEASE_MASK 0x00000001 /* release core 0 */
+
+/*
+ * SRIO_PCIE_BOOT - SLAVE
+ */
+#ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE
+#define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR 0xFFE00000
+#define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR_PHYS \
+		(0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR)
+#endif
+
+/*
+ * eSPI - Enhanced SPI
+ */
+#define CONFIG_FSL_ESPI
+#define CONFIG_SPI_FLASH
+#define CONFIG_SPI_FLASH_SST
+#define CONFIG_CMD_SF
+#define CONFIG_SF_DEFAULT_SPEED         10000000
+#define CONFIG_SF_DEFAULT_MODE          0
+
+/*
+ * General PCI
+ * Memory space is mapped 1-1, but I/O space must start from 0.
+ */
+
+/* controller 1, direct to uli, tgtid 3, Base address 20000 */
+#define CONFIG_SYS_PCIE1_MEM_VIRT	0x80000000
+#ifdef CONFIG_PHYS_64BIT
+#define CONFIG_SYS_PCIE1_MEM_BUS	0xe0000000
+#define CONFIG_SYS_PCIE1_MEM_PHYS	0xc00000000ull
+#else
+#define CONFIG_SYS_PCIE1_MEM_BUS	0x80000000
+#define CONFIG_SYS_PCIE1_MEM_PHYS	0x80000000
+#endif
+#define CONFIG_SYS_PCIE1_MEM_SIZE	0x20000000	/* 512M */
+#define CONFIG_SYS_PCIE1_IO_VIRT	0xf8000000
+#define CONFIG_SYS_PCIE1_IO_BUS		0x00000000
+#ifdef CONFIG_PHYS_64BIT
+#define CONFIG_SYS_PCIE1_IO_PHYS	0xff8000000ull
+#else
+#define CONFIG_SYS_PCIE1_IO_PHYS	0xf8000000
+#endif
+#define CONFIG_SYS_PCIE1_IO_SIZE	0x00010000	/* 64k */
+
+/* Qman/Bman */
+#ifndef CONFIG_NOBQFMAN
+#define CONFIG_SYS_DPAA_QBMAN		/* Support Q/Bman */
+#define CONFIG_SYS_BMAN_NUM_PORTALS	25
+#define CONFIG_SYS_BMAN_MEM_BASE	0xf4000000
+#ifdef CONFIG_PHYS_64BIT
+#define CONFIG_SYS_BMAN_MEM_PHYS	0xff4000000ull
+#else
+#define CONFIG_SYS_BMAN_MEM_PHYS	CONFIG_SYS_BMAN_MEM_BASE
+#endif
+#define CONFIG_SYS_BMAN_MEM_SIZE	0x02000000
+#define CONFIG_SYS_QMAN_NUM_PORTALS	25
+#define CONFIG_SYS_QMAN_MEM_BASE	0xf6000000
+#ifdef CONFIG_PHYS_64BIT
+#define CONFIG_SYS_QMAN_MEM_PHYS	0xff6000000ull
+#else
+#define CONFIG_SYS_QMAN_MEM_PHYS	CONFIG_SYS_QMAN_MEM_BASE
+#endif
+#define CONFIG_SYS_QMAN_MEM_SIZE	0x02000000
+
+#define CONFIG_SYS_DPAA_FMAN
+
+/* Default address of microcode for the Linux Fman driver */
+#if defined(CONFIG_SPIFLASH)
+/*
+ * env is stored at 0x100000, sector size is 0x10000, ucode is stored after
+ * env, so we got 0x110000.
+ */
+#define CONFIG_SYS_QE_FW_IN_SPIFLASH
+#define CONFIG_SYS_QE_FMAN_FW_ADDR	0x110000
+#elif defined(CONFIG_SDCARD)
+/*
+ * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is
+ * about 545KB (1089 blocks), Env is stored after the image, and the env size is
+ * 0x2000 (16 blocks), 8 + 1089 + 16 = 1113, enlarge it to 1130.
+ */
+#define CONFIG_SYS_QE_FMAN_FW_IN_MMC
+#define CONFIG_SYS_QE_FMAN_FW_ADDR	(512 * 1130)
+#elif defined(CONFIG_NAND)
+#define CONFIG_SYS_QE_FMAN_FW_IN_NAND
+#define CONFIG_SYS_QE_FMAN_FW_ADDR	(6 * CONFIG_SYS_NAND_BLOCK_SIZE)
+#else
+#define CONFIG_SYS_QE_FMAN_FW_IN_NOR
+#define CONFIG_SYS_QE_FMAN_FW_ADDR		0xEFF40000
+#endif
+#define CONFIG_SYS_QE_FMAN_FW_LENGTH	0x10000
+#define CONFIG_SYS_FDT_PAD		(0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
+#endif /* CONFIG_NOBQFMAN */
+
+#ifdef CONFIG_SYS_DPAA_FMAN
+#define CONFIG_FMAN_ENET
+#define CONFIG_PHYLIB_10G
+#define CONFIG_PHY_VITESSE
+#define CONFIG_PHY_TERANETICS
+#define SGMII_CARD_PORT1_PHY_ADDR 0x1C
+#define SGMII_CARD_PORT2_PHY_ADDR 0x10
+#define SGMII_CARD_PORT3_PHY_ADDR 0x1E
+#define SGMII_CARD_PORT4_PHY_ADDR 0x11
+#endif
+
+#ifdef CONFIG_PCI
+#define CONFIG_NET_MULTI
+#define CONFIG_PCI_PNP			/* do pci plug-and-play */
+#define CONFIG_E1000
+
+#define CONFIG_PCI_SCAN_SHOW		/* show pci devices on startup */
+#define CONFIG_DOS_PARTITION
+#endif	/* CONFIG_PCI */
+
+#ifdef CONFIG_FMAN_ENET
+#define CONFIG_SYS_FM1_DTSEC5_PHY_ADDR	0x10
+#define CONFIG_SYS_FM1_DTSEC6_PHY_ADDR	0x11
+#define CONFIG_SYS_FM1_10GEC1_PHY_ADDR	4
+
+#define CONFIG_SYS_FM1_DTSEC1_RISER_PHY_ADDR    0x1c
+#define CONFIG_SYS_FM1_DTSEC2_RISER_PHY_ADDR    0x1d
+#define CONFIG_SYS_FM1_DTSEC3_RISER_PHY_ADDR    0x1e
+#define CONFIG_SYS_FM1_DTSEC4_RISER_PHY_ADDR    0x1f
+
+#define CONFIG_MII		/* MII PHY management */
+#define CONFIG_ETHPRIME		"FM1@DTSEC1"
+#define CONFIG_PHY_GIGE		/* Include GbE speed/duplex detection */
+#endif
+
+/*
+ * Environment
+ */
+#define CONFIG_LOADS_ECHO		/* echo on for serial download */
+#define CONFIG_SYS_LOADS_BAUD_CHANGE	/* allow baudrate change */
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_ERRATA
+#define CONFIG_CMD_GREPENV
+#define CONFIG_CMD_IRQ
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_REGINFO
+#define CONFIG_CMD_SETEXPR
+
+#ifdef CONFIG_PCI
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_NET
+#endif
+
+/*
+* USB
+*/
+#define CONFIG_HAS_FSL_DR_USB
+
+#ifdef CONFIG_HAS_FSL_DR_USB
+#define CONFIG_USB_EHCI
+
+#ifdef CONFIG_USB_EHCI
+#define CONFIG_CMD_USB
+#define CONFIG_USB_STORAGE
+#define CONFIG_USB_EHCI_FSL
+#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
+#define CONFIG_CMD_EXT2
+#endif
+#endif
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CONFIG_SYS_LONGHELP			/* undef to save memory	*/
+#define CONFIG_CMDLINE_EDITING			/* Command-line editing */
+#define CONFIG_AUTO_COMPLETE			/* add autocompletion support */
+#define CONFIG_SYS_LOAD_ADDR	0x2000000	/* default load address */
+#define CONFIG_SYS_PROMPT	"=> "		/* Monitor Command Prompt */
+#ifdef CONFIG_CMD_KGDB
+#define CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size */
+#else
+#define CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size */
+#endif
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
+#define CONFIG_SYS_MAXARGS	16		/* max number of command args */
+#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
+#define CONFIG_SYS_HZ		1000		/* decrementer freq: 1ms ticks*/
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 64 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CONFIG_SYS_BOOTMAPSZ	(64 << 20)	/* Initial map for Linux*/
+#define CONFIG_SYS_BOOTM_LEN	(64 << 20)	/* Increase max gunzip size */
+
+#ifdef CONFIG_CMD_KGDB
+#define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
+#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
+#endif
+
+/*
+ * Environment Configuration
+ */
+#define CONFIG_ROOTPATH		"/opt/nfsroot"
+#define CONFIG_BOOTFILE		"uImage"
+#define CONFIG_UBOOTPATH	"u-boot.bin"	/* U-Boot image on TFTP server*/
+
+/* default location for tftp and bootm */
+#define CONFIG_LOADADDR		1000000
+
+#define CONFIG_BOOTDELAY	10	/* -1 disables auto-boot */
+
+#define CONFIG_BAUDRATE	115200
+
+#define __USB_PHY_TYPE	ulpi
+
+#define	CONFIG_EXTRA_ENV_SETTINGS				\
+	"hwconfig=fsl_ddr:ctlr_intlv=null,"		\
+	"bank_intlv=cs0_cs1;"					\
+	"usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\
+	"netdev=eth0\0"						\
+	"uboot=" __stringify(CONFIG_UBOOTPATH) "\0"			\
+	"ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0"			\
+	"tftpflash=tftpboot $loadaddr $uboot && "		\
+	"protect off $ubootaddr +$filesize && "			\
+	"erase $ubootaddr +$filesize && "			\
+	"cp.b $loadaddr $ubootaddr $filesize && "		\
+	"protect on $ubootaddr +$filesize && "			\
+	"cmp.b $loadaddr $ubootaddr $filesize\0"		\
+	"consoledev=ttyS0\0"					\
+	"ramdiskaddr=2000000\0"					\
+	"ramdiskfile=b4860qds/ramdisk.uboot\0"			\
+	"fdtaddr=c00000\0"					\
+	"fdtfile=b4860qds/b4860qds.dtb\0"				\
+	"bdev=sda3\0"						\
+	"c=ffe\0"
+
+/* For emulation this causes u-boot to jump to the start of the proof point
+   app code automatically */
+#define CONFIG_PROOF_POINTS			\
+ "setenv bootargs root=/dev/$bdev rw "		\
+ "console=$consoledev,$baudrate $othbootargs;"	\
+ "cpu 1 release 0x29000000 - - -;"		\
+ "cpu 2 release 0x29000000 - - -;"		\
+ "cpu 3 release 0x29000000 - - -;"		\
+ "cpu 4 release 0x29000000 - - -;"		\
+ "cpu 5 release 0x29000000 - - -;"		\
+ "cpu 6 release 0x29000000 - - -;"		\
+ "cpu 7 release 0x29000000 - - -;"		\
+ "go 0x29000000"
+
+#define CONFIG_HVBOOT	\
+ "setenv bootargs config-addr=0x60000000; "	\
+ "bootm 0x01000000 - 0x00f00000"
+
+#define CONFIG_ALU				\
+ "setenv bootargs root=/dev/$bdev rw "		\
+ "console=$consoledev,$baudrate $othbootargs;"	\
+ "cpu 1 release 0x01000000 - - -;"		\
+ "cpu 2 release 0x01000000 - - -;"		\
+ "cpu 3 release 0x01000000 - - -;"		\
+ "cpu 4 release 0x01000000 - - -;"		\
+ "cpu 5 release 0x01000000 - - -;"		\
+ "cpu 6 release 0x01000000 - - -;"		\
+ "cpu 7 release 0x01000000 - - -;"		\
+ "go 0x01000000"
+
+#define CONFIG_LINUX				\
+ "setenv bootargs root=/dev/ram rw "		\
+ "console=$consoledev,$baudrate $othbootargs;"	\
+ "setenv ramdiskaddr 0x02000000;"		\
+ "setenv fdtaddr 0x00c00000;"			\
+ "setenv loadaddr 0x1000000;"			\
+ "bootm $loadaddr $ramdiskaddr $fdtaddr"
+
+#define CONFIG_HDBOOT					\
+	"setenv bootargs root=/dev/$bdev rw "		\
+	"console=$consoledev,$baudrate $othbootargs;"	\
+	"tftp $loadaddr $bootfile;"			\
+	"tftp $fdtaddr $fdtfile;"			\
+	"bootm $loadaddr - $fdtaddr"
+
+#define CONFIG_NFSBOOTCOMMAND			\
+	"setenv bootargs root=/dev/nfs rw "	\
+	"nfsroot=$serverip:$rootpath "		\
+	"ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
+	"console=$consoledev,$baudrate $othbootargs;"	\
+	"tftp $loadaddr $bootfile;"		\
+	"tftp $fdtaddr $fdtfile;"		\
+	"bootm $loadaddr - $fdtaddr"
+
+#define CONFIG_RAMBOOTCOMMAND				\
+	"setenv bootargs root=/dev/ram rw "		\
+	"console=$consoledev,$baudrate $othbootargs;"	\
+	"tftp $ramdiskaddr $ramdiskfile;"		\
+	"tftp $loadaddr $bootfile;"			\
+	"tftp $fdtaddr $fdtfile;"			\
+	"bootm $loadaddr $ramdiskaddr $fdtaddr"
+
+#define CONFIG_BOOTCOMMAND		CONFIG_LINUX
+
+#ifdef CONFIG_SECURE_BOOT
+#include <asm/fsl_secure_boot.h>
+#endif
+
+#endif	/* __CONFIG_H */
diff --git a/include/configs/BSC9132QDS.h b/include/configs/BSC9132QDS.h
new file mode 100644
index 0000000..431c686
--- /dev/null
+++ b/include/configs/BSC9132QDS.h
@@ -0,0 +1,667 @@
+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * BSC9132 QDS board configuration file
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#ifdef CONFIG_BSC9132QDS
+#define CONFIG_BSC9132
+#endif
+
+#define CONFIG_MISC_INIT_R
+
+#ifdef CONFIG_SDCARD
+#define CONFIG_RAMBOOT_SDCARD
+#define CONFIG_SYS_RAMBOOT
+#define CONFIG_SYS_EXTRA_ENV_RELOC
+#define CONFIG_SYS_TEXT_BASE		0x11000000
+#define CONFIG_RESET_VECTOR_ADDRESS	0x1107fffc
+#endif
+#define CONFIG_SYS_FSL_ERRATUM_IFC_A002769	1
+#ifdef CONFIG_SPIFLASH
+#define CONFIG_RAMBOOT_SPIFLASH
+#define CONFIG_SYS_RAMBOOT
+#define CONFIG_SYS_EXTRA_ENV_RELOC
+#define CONFIG_SYS_TEXT_BASE		0x11000000
+#define CONFIG_RESET_VECTOR_ADDRESS	0x1107fffc
+#endif
+
+#ifndef CONFIG_SYS_TEXT_BASE
+#define CONFIG_SYS_TEXT_BASE		0x8ff80000
+#endif
+
+#ifndef CONFIG_RESET_VECTOR_ADDRESS
+#define CONFIG_RESET_VECTOR_ADDRESS	0x8ffffffc
+#endif
+
+#ifndef CONFIG_SYS_MONITOR_BASE
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE    /* start of monitor */
+#endif
+
+
+/* High Level Configuration Options */
+#define CONFIG_BOOKE			/* BOOKE */
+#define CONFIG_E500			/* BOOKE e500 family */
+#define CONFIG_MPC85xx
+#define CONFIG_FSL_IFC			/* Enable IFC Support */
+#define CONFIG_SYS_HAS_SERDES		/* common SERDES init code */
+
+#define CONFIG_PCI			/* Enable PCI/PCIE */
+#if defined(CONFIG_PCI)
+#define CONFIG_PCIE1			/* PCIE controler 1 (slot 1) */
+#define CONFIG_FSL_PCI_INIT		/* Use common FSL init code */
+#define CONFIG_FSL_PCIE_RESET		/* need PCIe reset errata */
+#define CONFIG_SYS_PCI_64BIT		/* enable 64-bit PCI resources */
+
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_PCI
+
+#define CONFIG_E1000			/*  E1000 pci Ethernet card*/
+
+/*
+ * PCI Windows
+ * Memory space is mapped 1-1, but I/O space must start from 0.
+ */
+/* controller 1, Slot 1, tgtid 1, Base address a000 */
+#define CONFIG_SYS_PCIE1_NAME		"PCIe Slot"
+#define CONFIG_SYS_PCIE1_MEM_VIRT	0x90000000
+#define CONFIG_SYS_PCIE1_MEM_BUS	0x90000000
+#define CONFIG_SYS_PCIE1_MEM_PHYS	0x90000000
+#define CONFIG_SYS_PCIE1_MEM_SIZE	0x10000000	/* 256M */
+#define CONFIG_SYS_PCIE1_IO_VIRT	0xC0010000
+#define CONFIG_SYS_PCIE1_IO_BUS		0x00000000
+#define CONFIG_SYS_PCIE1_IO_SIZE	0x00010000	/* 64k */
+#define CONFIG_SYS_PCIE1_IO_PHYS	0xC0010000
+
+#define CONFIG_PCI_PNP			/* do pci plug-and-play */
+
+#define CONFIG_PCI_SCAN_SHOW		/* show pci devices on startup */
+#define CONFIG_DOS_PARTITION
+#endif
+
+#define CONFIG_FSL_LAW			/* Use common FSL init code */
+#define CONFIG_ENV_OVERWRITE
+#define CONFIG_TSEC_ENET /* ethernet */
+
+#if defined(CONFIG_SYS_CLK_100_DDR_100)
+#define CONFIG_SYS_CLK_FREQ	100000000
+#define CONFIG_DDR_CLK_FREQ	100000000
+#elif defined(CONFIG_SYS_CLK_100_DDR_133)
+#define CONFIG_SYS_CLK_FREQ	100000000
+#define CONFIG_DDR_CLK_FREQ	133000000
+#endif
+
+#define CONFIG_MP
+
+#define CONFIG_HWCONFIG
+/*
+ * These can be toggled for performance analysis, otherwise use default.
+ */
+#define CONFIG_L2_CACHE			/* toggle L2 cache */
+#define CONFIG_BTB			/* enable branch predition */
+
+#define CONFIG_SYS_MEMTEST_START	0x01000000	/* memtest works on */
+#define CONFIG_SYS_MEMTEST_END		0x01ffffff
+
+/* DDR Setup */
+#define CONFIG_FSL_DDR3
+#define CONFIG_SYS_SPD_BUS_NUM		0
+#define SPD_EEPROM_ADDRESS1		0x54 /* I2C access */
+#define SPD_EEPROM_ADDRESS2		0x56 /* I2C access */
+#define CONFIG_FSL_DDR_INTERACTIVE
+
+#define CONFIG_MEM_INIT_VALUE		0xDeadBeef
+
+#define CONFIG_SYS_SDRAM_SIZE		(1024)
+#define CONFIG_SYS_DDR_SDRAM_BASE	0x00000000
+#define CONFIG_SYS_SDRAM_BASE		CONFIG_SYS_DDR_SDRAM_BASE
+
+#define CONFIG_DIMM_SLOTS_PER_CTLR	1
+
+/* DDR3 Controller Settings */
+#define CONFIG_CHIP_SELECTS_PER_CTRL	1
+#define CONFIG_SYS_DDR_CS0_BNDS		0x0000003F
+#define CONFIG_SYS_DDR_CS0_CONFIG_1333	0x80004302
+#define CONFIG_SYS_DDR_CS0_CONFIG_800	0x80014302
+#define CONFIG_SYS_DDR_CS0_CONFIG_2	0x00000000
+#define CONFIG_SYS_DDR_DATA_INIT	0xdeadbeef
+#define CONFIG_SYS_DDR_INIT_ADDR	0x00000000
+#define CONFIG_SYS_DDR_INIT_EXT_ADDR	0x00000000
+#define CONFIG_SYS_DDR_MODE_CONTROL	0x00000000
+#define CONFIG_SYS_DDR1_CS0_BNDS       0x0040007F
+
+#define CONFIG_SYS_DDR_ZQ_CONTROL	0x89080600
+#define CONFIG_SYS_DDR_SR_CNTR		0x00000000
+#define CONFIG_SYS_DDR_RCW_1		0x00000000
+#define CONFIG_SYS_DDR_RCW_2		0x00000000
+#define CONFIG_SYS_DDR_CONTROL_800		0x470C0000
+#define CONFIG_SYS_DDR_CONTROL_2_800	0x04401050
+#define CONFIG_SYS_DDR_TIMING_4_800		0x00220001
+#define CONFIG_SYS_DDR_TIMING_5_800		0x03402400
+
+#define CONFIG_SYS_DDR_CONTROL_1333		0x470C0008
+#define CONFIG_SYS_DDR_CONTROL_2_1333	0x24401010
+#define CONFIG_SYS_DDR_TIMING_4_1333		0x00000001
+#define CONFIG_SYS_DDR_TIMING_5_1333		0x03401400
+
+#define CONFIG_SYS_DDR_TIMING_3_800		0x00020000
+#define CONFIG_SYS_DDR_TIMING_0_800		0x00330004
+#define CONFIG_SYS_DDR_TIMING_1_800		0x6f6B4846
+#define CONFIG_SYS_DDR_TIMING_2_800		0x0FA8C8CF
+#define CONFIG_SYS_DDR_CLK_CTRL_800		0x03000000
+#define CONFIG_SYS_DDR_MODE_1_800		0x40461520
+#define CONFIG_SYS_DDR_MODE_2_800		0x8000c000
+#define CONFIG_SYS_DDR_INTERVAL_800		0x0C300000
+#define CONFIG_SYS_DDR_WRLVL_CONTROL_800	0x8655A608
+
+#define CONFIG_SYS_DDR_TIMING_3_1333		0x01061000
+#define CONFIG_SYS_DDR_TIMING_0_1333		0x00440104
+#define CONFIG_SYS_DDR_TIMING_1_1333		0x98913A45
+#define CONFIG_SYS_DDR_TIMING_2_1333		0x0FB8B114
+#define CONFIG_SYS_DDR_CLK_CTRL_1333		0x02800000
+#define CONFIG_SYS_DDR_MODE_1_1333		0x00061A50
+#define CONFIG_SYS_DDR_MODE_2_1333		0x00100000
+#define CONFIG_SYS_DDR_INTERVAL_1333		0x144E0513
+#define CONFIG_SYS_DDR_WRLVL_CONTROL_1333	0x8655F607
+
+/*FIXME: the following params are constant w.r.t diff freq
+combinations. this should be removed later
+*/
+#if CONFIG_DDR_CLK_FREQ == 100000000
+#define CONFIG_SYS_DDR_CS0_CONFIG CONFIG_SYS_DDR_CS0_CONFIG_800
+#define CONFIG_SYS_DDR_CONTROL		CONFIG_SYS_DDR_CONTROL_800
+#define CONFIG_SYS_DDR_CONTROL_2 CONFIG_SYS_DDR_CONTROL_2_800
+#define CONFIG_SYS_DDR_TIMING_4	CONFIG_SYS_DDR_TIMING_4_800
+#define CONFIG_SYS_DDR_TIMING_5	CONFIG_SYS_DDR_TIMING_5_800
+#elif CONFIG_DDR_CLK_FREQ == 133000000
+#define CONFIG_SYS_DDR_CS0_CONFIG CONFIG_SYS_DDR_CS0_CONFIG_1333
+#define CONFIG_SYS_DDR_CONTROL		CONFIG_SYS_DDR_CONTROL_1333
+#define CONFIG_SYS_DDR_CONTROL_2	CONFIG_SYS_DDR_CONTROL_2_1333
+#define CONFIG_SYS_DDR_TIMING_4	CONFIG_SYS_DDR_TIMING_4_1333
+#define CONFIG_SYS_DDR_TIMING_5	CONFIG_SYS_DDR_TIMING_5_1333
+#else
+#define CONFIG_SYS_DDR_CS0_CONFIG CONFIG_SYS_DDR_CS0_CONFIG_800
+#define CONFIG_SYS_DDR_CONTROL		CONFIG_SYS_DDR_CONTROL_800
+#define CONFIG_SYS_DDR_CONTROL_2	CONFIG_SYS_DDR_CONTROL_2_800
+#define CONFIG_SYS_DDR_TIMING_4	CONFIG_SYS_DDR_TIMING_4_800
+#define CONFIG_SYS_DDR_TIMING_5	CONFIG_SYS_DDR_TIMING_5_800
+#endif
+
+
+/* relocated CCSRBAR */
+#define CONFIG_SYS_CCSRBAR	CONFIG_SYS_CCSRBAR_DEFAULT
+#define CONFIG_SYS_CCSRBAR_PHYS_LOW	CONFIG_SYS_CCSRBAR_DEFAULT
+
+#define CONFIG_SYS_IMMR		CONFIG_SYS_CCSRBAR
+
+/*
+ * IFC Definitions
+ */
+/* NOR Flash on IFC */
+#define CONFIG_SYS_FLASH_BASE		0x88000000
+#define CONFIG_SYS_MAX_FLASH_SECT	1024	/* Max number of sector: 32M */
+
+#define CONFIG_SYS_FLASH_BASE_PHYS	CONFIG_SYS_FLASH_BASE
+
+#define CONFIG_SYS_NOR_CSPR	0x88000101
+#define CONFIG_SYS_NOR_AMASK	IFC_AMASK(128*1024*1024)
+#define CONFIG_SYS_NOR_CSOR	CSOR_NOR_ADM_SHIFT(5)
+/* NOR Flash Timing Params */
+
+#define CONFIG_SYS_NOR_FTIM0	(FTIM0_NOR_TACSE(0x01) \
+				| FTIM0_NOR_TEADC(0x03) \
+				| FTIM0_NOR_TAVDS(0x00) \
+				| FTIM0_NOR_TEAHC(0x0f))
+#define CONFIG_SYS_NOR_FTIM1	(FTIM1_NOR_TACO(0x1d) \
+				| FTIM1_NOR_TRAD_NOR(0x09) \
+				| FTIM1_NOR_TSEQRAD_NOR(0x09))
+#define CONFIG_SYS_NOR_FTIM2	(FTIM2_NOR_TCS(0x1) \
+				| FTIM2_NOR_TCH(0x4) \
+				| FTIM2_NOR_TWPH(0x7) \
+				| FTIM2_NOR_TWP(0x1e))
+#define CONFIG_SYS_NOR_FTIM3	0x0
+
+#define CONFIG_SYS_FLASH_BANKS_LIST	{CONFIG_SYS_FLASH_BASE_PHYS}
+#define CONFIG_SYS_FLASH_QUIET_TEST
+#define CONFIG_FLASH_SHOW_PROGRESS	45	/* count down from 45/5: 9..1 */
+#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* number of banks */
+
+#undef CONFIG_SYS_FLASH_CHECKSUM
+#define CONFIG_SYS_FLASH_ERASE_TOUT	60000	/* Flash Erase Timeout (ms) */
+#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (ms) */
+
+/* CFI for NOR Flash */
+#define CONFIG_FLASH_CFI_DRIVER
+#define CONFIG_SYS_FLASH_CFI
+#define CONFIG_SYS_FLASH_EMPTY_INFO
+#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
+
+/* NAND Flash on IFC */
+#define CONFIG_SYS_NAND_BASE		0xff800000
+#define CONFIG_SYS_NAND_BASE_PHYS	CONFIG_SYS_NAND_BASE
+
+#define CONFIG_SYS_NAND_CSPR	(CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
+				| CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \
+				| CSPR_MSEL_NAND	/* MSEL = NAND */ \
+				| CSPR_V)
+#define CONFIG_SYS_NAND_AMASK	IFC_AMASK(64*1024)
+
+#define CONFIG_SYS_NAND_CSOR    (CSOR_NAND_ECC_ENC_EN   /* ECC on encode */ \
+				| CSOR_NAND_ECC_DEC_EN  /* ECC on decode */ \
+				| CSOR_NAND_ECC_MODE_4  /* 4-bit ECC */ \
+				| CSOR_NAND_RAL_2	/* RAL = 2Byes */ \
+				| CSOR_NAND_PGS_2K	/* Page Size = 2K */ \
+				| CSOR_NAND_SPRZ_64/* Spare size = 64 */ \
+				| CSOR_NAND_PB(64))	/*Pages Per Block = 64*/
+
+/* NAND Flash Timing Params */
+#define CONFIG_SYS_NAND_FTIM0		(FTIM0_NAND_TCCST(0x03) \
+					| FTIM0_NAND_TWP(0x05) \
+					| FTIM0_NAND_TWCHT(0x02) \
+					| FTIM0_NAND_TWH(0x04))
+#define CONFIG_SYS_NAND_FTIM1		(FTIM1_NAND_TADLE(0x1c) \
+					| FTIM1_NAND_TWBE(0x1e) \
+					| FTIM1_NAND_TRR(0x07) \
+					| FTIM1_NAND_TRP(0x05))
+#define CONFIG_SYS_NAND_FTIM2		(FTIM2_NAND_TRAD(0x08) \
+					| FTIM2_NAND_TREH(0x04) \
+					| FTIM2_NAND_TWHRE(0x11))
+#define CONFIG_SYS_NAND_FTIM3		FTIM3_NAND_TWW(0x04)
+
+#define CONFIG_SYS_NAND_DDR_LAW		11
+
+/* NAND */
+#define CONFIG_SYS_NAND_BASE_LIST	{ CONFIG_SYS_NAND_BASE }
+#define CONFIG_SYS_MAX_NAND_DEVICE	1
+#define CONFIG_MTD_NAND_VERIFY_WRITE
+#define CONFIG_CMD_NAND
+
+#define CONFIG_SYS_NAND_BLOCK_SIZE	(128 * 1024)
+
+#define CONFIG_FSL_QIXIS
+#ifdef CONFIG_FSL_QIXIS
+#define CONFIG_SYS_FPGA_BASE	0xffb00000
+#define CONFIG_SYS_I2C_FPGA_ADDR	0x66
+#define QIXIS_BASE	CONFIG_SYS_FPGA_BASE
+#define QIXIS_LBMAP_SWITCH	9
+#define QIXIS_LBMAP_MASK	0x07
+#define QIXIS_LBMAP_SHIFT	0
+#define QIXIS_LBMAP_DFLTBANK		0x00
+#define QIXIS_LBMAP_ALTBANK		0x04
+#define QIXIS_RST_CTL_RESET		0x83
+#define QIXIS_RCFG_CTL_RECONFIG_IDLE	0x20
+#define QIXIS_RCFG_CTL_RECONFIG_START	0x21
+#define QIXIS_RCFG_CTL_WATCHDOG_ENBLE	0x08
+
+#define CONFIG_SYS_FPGA_BASE_PHYS	CONFIG_SYS_FPGA_BASE
+
+#define CONFIG_SYS_CSPR2		(CSPR_PHYS_ADDR(CONFIG_SYS_FPGA_BASE) \
+					| CSPR_PORT_SIZE_8 \
+					| CSPR_MSEL_GPCM \
+					| CSPR_V)
+#define CONFIG_SYS_AMASK2		IFC_AMASK(64*1024)
+#define CONFIG_SYS_CSOR2		0x0
+/* CPLD Timing parameters for IFC CS3 */
+#define CONFIG_SYS_CS2_FTIM0		(FTIM0_GPCM_TACSE(0x0e) | \
+					FTIM0_GPCM_TEADC(0x0e) | \
+					FTIM0_GPCM_TEAHC(0x0e))
+#define CONFIG_SYS_CS2_FTIM1		(FTIM1_GPCM_TACO(0x0e) | \
+					FTIM1_GPCM_TRAD(0x1f))
+#define CONFIG_SYS_CS2_FTIM2		(FTIM2_GPCM_TCS(0x0e) | \
+					FTIM2_GPCM_TCH(0x0) | \
+					FTIM2_GPCM_TWP(0x1f))
+#define CONFIG_SYS_CS2_FTIM3		0x0
+#endif
+
+/* Set up IFC registers for boot location NOR/NAND */
+#define CONFIG_SYS_CSPR0		CONFIG_SYS_NOR_CSPR
+#define CONFIG_SYS_AMASK0		CONFIG_SYS_NOR_AMASK
+#define CONFIG_SYS_CSOR0		CONFIG_SYS_NOR_CSOR
+#define CONFIG_SYS_CS0_FTIM0		CONFIG_SYS_NOR_FTIM0
+#define CONFIG_SYS_CS0_FTIM1		CONFIG_SYS_NOR_FTIM1
+#define CONFIG_SYS_CS0_FTIM2		CONFIG_SYS_NOR_FTIM2
+#define CONFIG_SYS_CS0_FTIM3		CONFIG_SYS_NOR_FTIM3
+#define CONFIG_SYS_CSPR1		CONFIG_SYS_NAND_CSPR
+#define CONFIG_SYS_AMASK1		CONFIG_SYS_NAND_AMASK
+#define CONFIG_SYS_CSOR1		CONFIG_SYS_NAND_CSOR
+#define CONFIG_SYS_CS1_FTIM0		CONFIG_SYS_NAND_FTIM0
+#define CONFIG_SYS_CS1_FTIM1		CONFIG_SYS_NAND_FTIM1
+#define CONFIG_SYS_CS1_FTIM2		CONFIG_SYS_NAND_FTIM2
+#define CONFIG_SYS_CS1_FTIM3		CONFIG_SYS_NAND_FTIM3
+
+#define CONFIG_BOARD_EARLY_INIT_F	/* Call board_pre_init */
+#define CONFIG_BOARD_EARLY_INIT_R
+
+#define CONFIG_SYS_INIT_RAM_LOCK
+#define CONFIG_SYS_INIT_RAM_ADDR	0xffd00000	/* stack in RAM */
+#define CONFIG_SYS_INIT_RAM_END		0x00004000 /* End of used area in RAM */
+
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END \
+						- GENERATED_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
+
+#define CONFIG_SYS_MONITOR_LEN		(256 * 1024) /* Reserve 256 kB for Mon*/
+#define CONFIG_SYS_MALLOC_LEN		(1024 * 1024)	/* Reserved for malloc*/
+
+/* Serial Port */
+#define CONFIG_CONS_INDEX	1
+#undef	CONFIG_SERIAL_SOFTWARE_FIFO
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_REG_SIZE	1
+#define CONFIG_SYS_NS16550_CLK		get_bus_freq(0)
+
+#define CONFIG_SERIAL_MULTI	1 /* Enable both serial ports */
+#define CONFIG_SYS_CONSOLE_IS_IN_ENV	/* determine from environment */
+
+#define CONFIG_SYS_BAUDRATE_TABLE	\
+	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
+
+#define CONFIG_SYS_NS16550_COM1	(CONFIG_SYS_CCSRBAR + 0x4500)
+#define CONFIG_SYS_NS16550_COM2	(CONFIG_SYS_CCSRBAR + 0x4600)
+#define CONFIG_SYS_NS16550_COM3	(CONFIG_SYS_CCSRBAR + 0x4700)
+#define CONFIG_SYS_NS16550_COM4	(CONFIG_SYS_CCSRBAR + 0x4800)
+
+/* Use the HUSH parser */
+#define CONFIG_SYS_HUSH_PARSER    /* hush parser */
+#ifdef	CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
+#endif
+
+/*
+ * Pass open firmware flat tree
+ */
+#define CONFIG_OF_LIBFDT
+#define CONFIG_OF_BOARD_SETUP
+#define CONFIG_OF_STDOUT_VIA_ALIAS
+
+/* new uImage format support */
+#define CONFIG_FIT
+#define CONFIG_FIT_VERBOSE	/* enable fit_format_{error,warning}() */
+
+#define CONFIG_FSL_I2C			/* Use FSL common I2C driver */
+#define CONFIG_HARD_I2C			/* I2C with hardware support */
+#undef CONFIG_SOFT_I2C			/* I2C bit-banged */
+#define CONFIG_I2C_MULTI_BUS
+#define CONFIG_I2C_CMD_TREE
+#define CONFIG_SYS_I2C_SPEED		400800 /* I2C speed and slave address*/
+#define CONFIG_SYS_I2C_SLAVE		0x7F
+#define CONFIG_SYS_I2C_OFFSET		0x3000
+#define CONFIG_SYS_I2C2_OFFSET		0x3100
+
+/* I2C EEPROM */
+#define CONFIG_ID_EEPROM
+#ifdef CONFIG_ID_EEPROM
+#define CONFIG_SYS_I2C_EEPROM_NXID
+#endif
+#define CONFIG_SYS_I2C_EEPROM_ADDR	0x57
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
+#define CONFIG_SYS_EEPROM_BUS_NUM	0
+
+/* enable read and write access to EEPROM */
+#define CONFIG_CMD_EEPROM
+#define CONFIG_SYS_I2C_MULTI_EEPROMS
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5
+
+/* I2C FPGA */
+#define CONFIG_I2C_FPGA
+#define CONFIG_SYS_I2C_FPGA_ADDR	0x66
+
+#define CONFIG_RTC_DS3231
+#define CONFIG_SYS_I2C_RTC_ADDR		0x68
+
+/*
+ * SPI interface will not be available in case of NAND boot SPI CS0 will be
+ * used for SLIC
+ */
+/* eSPI - Enhanced SPI */
+#define CONFIG_FSL_ESPI  /* SPI */
+#ifdef CONFIG_FSL_ESPI
+#define CONFIG_SPI_FLASH
+#define CONFIG_SPI_FLASH_SPANSION
+#define CONFIG_CMD_SF
+#define CONFIG_SF_DEFAULT_SPEED		10000000
+#define CONFIG_SF_DEFAULT_MODE		SPI_MODE_0
+#endif
+
+#if defined(CONFIG_TSEC_ENET)
+
+#define CONFIG_MII			/* MII PHY management */
+#define CONFIG_MII_DEFAULT_TSEC	1	/* Allow unregistered phys */
+#define CONFIG_TSEC1	1
+#define CONFIG_TSEC1_NAME	"eTSEC1"
+#define CONFIG_TSEC2	1
+#define CONFIG_TSEC2_NAME	"eTSEC2"
+
+#define TSEC1_PHY_ADDR		0
+#define TSEC2_PHY_ADDR		1
+
+#define TSEC1_FLAGS		(TSEC_GIGABIT | TSEC_REDUCED)
+#define TSEC2_FLAGS		(TSEC_GIGABIT | TSEC_REDUCED)
+
+#define TSEC1_PHYIDX		0
+#define TSEC2_PHYIDX		0
+
+#define CONFIG_ETHPRIME		"eTSEC1"
+
+#define CONFIG_PHY_GIGE		/* Include GbE speed/duplex detection */
+
+/* TBI PHY configuration for SGMII mode */
+#define CONFIG_TSEC_TBICR_SETTINGS ( \
+		TBICR_PHY_RESET \
+		| TBICR_ANEG_ENABLE \
+		| TBICR_FULL_DUPLEX \
+		| TBICR_SPEED1_SET \
+		)
+
+#endif	/* CONFIG_TSEC_ENET */
+
+#define CONFIG_MMC
+#ifdef CONFIG_MMC
+#define CONFIG_CMD_MMC
+#define CONFIG_DOS_PARTITION
+#define CONFIG_FSL_ESDHC
+#define CONFIG_GENERIC_MMC
+#define CONFIG_SYS_FSL_ESDHC_ADDR	CONFIG_SYS_MPC85xx_ESDHC_ADDR
+#endif
+
+#define CONFIG_USB_EHCI  /* USB */
+#ifdef CONFIG_USB_EHCI
+#define CONFIG_CMD_USB
+#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
+#define CONFIG_USB_EHCI_FSL
+#define CONFIG_USB_STORAGE
+#define CONFIG_HAS_FSL_DR_USB
+#endif
+
+/*
+ * Environment
+ */
+#if defined(CONFIG_SYS_RAMBOOT)
+#if defined(CONFIG_RAMBOOT_SDCARD)
+#define CONFIG_ENV_IS_IN_MMC
+#define CONFIG_SYS_MMC_ENV_DEV		0
+#define CONFIG_ENV_SIZE			0x2000
+#elif defined(CONFIG_RAMBOOT_SPIFLASH)
+#define CONFIG_ENV_IS_IN_SPI_FLASH
+#define CONFIG_ENV_SPI_BUS	0
+#define CONFIG_ENV_SPI_CS	0
+#define CONFIG_ENV_SPI_MAX_HZ	10000000
+#define CONFIG_ENV_SPI_MODE	0
+#define CONFIG_ENV_OFFSET	0x100000	/* 1MB */
+#define CONFIG_ENV_SECT_SIZE	0x10000
+#define CONFIG_ENV_SIZE		0x2000
+#else
+#define CONFIG_ENV_IS_NOWHERE		/* Store ENV in memory only */
+#define CONFIG_ENV_ADDR			(CONFIG_SYS_MONITOR_BASE - 0x1000)
+#define CONFIG_ENV_SIZE			0x2000
+#endif
+#else
+#define CONFIG_ENV_IS_IN_FLASH
+#if CONFIG_SYS_MONITOR_BASE > 0xfff80000
+#define CONFIG_ENV_ADDR	0xfff80000
+#else
+#define CONFIG_ENV_ADDR	(CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
+#endif
+#define CONFIG_ENV_SIZE		0x2000
+#define CONFIG_ENV_SECT_SIZE	0x20000 /* 128K (one sector) */
+#endif
+
+#define CONFIG_LOADS_ECHO		/* echo on for serial download */
+#define CONFIG_SYS_LOADS_BAUD_CHANGE	/* allow baudrate change */
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_ERRATA
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_IRQ
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_SETEXPR
+#define CONFIG_CMD_REGINFO
+
+#if defined(CONFIG_MMC) || defined(CONFIG_USB_EHCI)
+#define CONFIG_CMD_EXT2
+#define CONFIG_CMD_FAT
+#define CONFIG_DOS_PARTITION
+#endif
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CONFIG_SYS_LONGHELP			/* undef to save memory	*/
+#define CONFIG_CMDLINE_EDITING			/* Command-line editing */
+#define CONFIG_AUTO_COMPLETE			/* add autocompletion support */
+#define CONFIG_SYS_LOAD_ADDR	0x2000000	/* default load address */
+#define CONFIG_SYS_PROMPT	"=> "		/* Monitor Command Prompt */
+
+#if defined(CONFIG_CMD_KGDB)
+#define CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size */
+#else
+#define CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size */
+#endif
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
+						/* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS	16		/* max number of command args */
+#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
+#define CONFIG_SYS_HZ		1000		/* decrementer freq:1ms ticks */
+
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 64 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CONFIG_SYS_BOOTMAPSZ	(64 << 20) /* Initial Memory map for Linux */
+#define CONFIG_SYS_BOOTM_LEN	(64 << 20) /* Increase max gunzip size */
+
+#if defined(CONFIG_CMD_KGDB)
+#define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
+#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
+#endif
+
+/*
+ * Environment Configuration
+ */
+
+#if defined(CONFIG_TSEC_ENET)
+#define CONFIG_HAS_ETH0
+#define CONFIG_HAS_ETH1
+#endif
+
+#define CONFIG_HOSTNAME		BSC9132qds
+#define CONFIG_ROOTPATH		"/opt/nfsroot"
+#define CONFIG_BOOTFILE		"uImage"
+#define CONFIG_UBOOTPATH	"u-boot.bin"
+
+#define CONFIG_BAUDRATE		115200
+
+#ifdef CONFIG_SDCARD
+#define CONFIG_DEF_HWCONFIG	"hwconfig=usb1:dr_mode=host,phy_type=ulpi\0"
+#else
+#define CONFIG_DEF_HWCONFIG	"hwconfig=sim;usb1:dr_mode=host,phy_type=ulpi\0"
+#endif
+
+#define	CONFIG_EXTRA_ENV_SETTINGS				\
+	"netdev=eth0\0"						\
+	"uboot=" CONFIG_UBOOTPATH "\0"				\
+	"loadaddr=1000000\0"			\
+	"bootfile=uImage\0"	\
+	"consoledev=ttyS0\0"				\
+	"ramdiskaddr=2000000\0"			\
+	"ramdiskfile=rootfs.ext2.gz.uboot\0"		\
+	"fdtaddr=c00000\0"				\
+	"fdtfile=bsc9132qds.dtb\0"		\
+	"bdev=sda1\0"	\
+	CONFIG_DEF_HWCONFIG\
+	"othbootargs=mem=880M ramdisk_size=600000 " \
+		"default_hugepagesz=256m hugepagesz=256m hugepages=1 " \
+		"isolcpus=0\0" \
+	"usbext2boot=setenv bootargs root=/dev/ram rw "	\
+		"console=$consoledev,$baudrate $othbootargs; "	\
+		"usb start;"			\
+		"ext2load usb 0:4 $loadaddr $bootfile;"		\
+		"ext2load usb 0:4 $fdtaddr $fdtfile;"	\
+		"ext2load usb 0:4 $ramdiskaddr $ramdiskfile;"	\
+		"bootm $loadaddr $ramdiskaddr $fdtaddr\0"	\
+	"debug_halt_off=mw ff7e0e30 0xf0000000;"
+
+#define CONFIG_NFSBOOTCOMMAND	\
+	"setenv bootargs root=/dev/nfs rw "	\
+	"nfsroot=$serverip:$rootpath "	\
+	"ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
+	"console=$consoledev,$baudrate $othbootargs;" \
+	"tftp $loadaddr $bootfile;"	\
+	"tftp $fdtaddr $fdtfile;"	\
+	"bootm $loadaddr - $fdtaddr"
+
+#define CONFIG_HDBOOT	\
+	"setenv bootargs root=/dev/$bdev rw rootdelay=30 "	\
+	"console=$consoledev,$baudrate $othbootargs;" \
+	"usb start;"	\
+	"ext2load usb 0:1 $loadaddr /boot/$bootfile;"	\
+	"ext2load usb 0:1 $fdtaddr /boot/$fdtfile;"	\
+	"bootm $loadaddr - $fdtaddr"
+
+#define CONFIG_RAMBOOTCOMMAND		\
+	"setenv bootargs root=/dev/ram rw "	\
+	"console=$consoledev,$baudrate $othbootargs; "	\
+	"tftp $ramdiskaddr $ramdiskfile;"	\
+	"tftp $loadaddr $bootfile;"		\
+	"tftp $fdtaddr $fdtfile;"		\
+	"bootm $loadaddr $ramdiskaddr $fdtaddr"
+
+#define CONFIG_BOOTCOMMAND CONFIG_RAMBOOTCOMMAND
+
+#endif	/* __CONFIG_H */
diff --git a/include/configs/MPC8544DS.h b/include/configs/MPC8544DS.h
index 83b8668..d5f3c5f 100644
--- a/include/configs/MPC8544DS.h
+++ b/include/configs/MPC8544DS.h
@@ -415,6 +415,18 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
     #define CONFIG_CMD_EXT2
 #endif
 
+/*
+ * USB
+ */
+#define CONFIG_USB_EHCI
+
+#ifdef CONFIG_USB_EHCI
+#define CONFIG_CMD_USB
+#define CONFIG_USB_EHCI_PCI
+#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
+#define CONFIG_USB_STORAGE
+#define CONFIG_PCI_EHCI_DEVICE			0
+#endif
 
 #undef CONFIG_WATCHDOG			/* watchdog disabled */
 
diff --git a/include/configs/MPC8572DS.h b/include/configs/MPC8572DS.h
index a62b7d5..d233365 100644
--- a/include/configs/MPC8572DS.h
+++ b/include/configs/MPC8572DS.h
@@ -735,7 +735,7 @@
 #define CONFIG_BAUDRATE	115200
 
 #define	CONFIG_EXTRA_ENV_SETTINGS				\
-"hwconfig=fsl_ddr:ctlr_intlv=bank,ecc=off\0"			\
+"hwconfig=fsl_ddr:ctlr_intlv=bank,bank_intlv=cs0_cs1,ecc=off\0"		\
 "netdev=eth0\0"						\
 "uboot=" __stringify(CONFIG_UBOOTPATH) "\0"				\
 "tftpflash=tftpboot $loadaddr $uboot; "			\
diff --git a/include/configs/P2020DS.h b/include/configs/P2020DS.h
index 0cc5781..a975ee1 100644
--- a/include/configs/P2020DS.h
+++ b/include/configs/P2020DS.h
@@ -490,7 +490,7 @@
 #define VIDEO_IO_OFFSET		CONFIG_SYS_PCIE1_IO_VIRT
 
 /* video */
-#define CONFIG_VIDEO
+#undef CONFIG_VIDEO
 
 #if defined(CONFIG_VIDEO)
 #define CONFIG_BIOSEMU
diff --git a/include/configs/P2041RDB.h b/include/configs/P2041RDB.h
index 8b9b0db..bbc53ce 100644
--- a/include/configs/P2041RDB.h
+++ b/include/configs/P2041RDB.h
@@ -34,6 +34,8 @@
 #ifdef CONFIG_RAMBOOT_PBL
 #define CONFIG_RAMBOOT_TEXT_BASE	CONFIG_SYS_TEXT_BASE
 #define CONFIG_RESET_VECTOR_ADDRESS	0xfffffffc
+#define CONFIG_PBLPBI_CONFIG $(SRCTREE)/board/freescale/corenet_ds/pbi.cfg
+#define CONFIG_PBLRCW_CONFIG $(SRCTREE)/board/freescale/corenet_ds/rcw_p2041rdb.cfg
 #endif
 
 #ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE
diff --git a/include/configs/apx4devkit.h b/include/configs/apx4devkit.h
index 6764b47..73c66af 100644
--- a/include/configs/apx4devkit.h
+++ b/include/configs/apx4devkit.h
@@ -175,7 +175,6 @@
 #define CONFIG_FEC_MXC_PHYADDR		0
 #define IMX_FEC_BASE			MXS_ENET0_BASE
 #define CONFIG_MII
-#define CONFIG_DISCOVER_PHY
 #define CONFIG_FEC_XCV_TYPE		RMII
 #endif
 
diff --git a/include/configs/microblaze-generic.h b/include/configs/microblaze-generic.h
index eed38c1..d172e56 100644
--- a/include/configs/microblaze-generic.h
+++ b/include/configs/microblaze-generic.h
@@ -120,10 +120,6 @@
 #  define CONFIG_SYS_TIMER_0_IRQ	XILINX_TIMER_IRQ
 #endif
 
-/* FSL */
-/* #define	CONFIG_SYS_FSL_2 */
-/* #define	FSL_INTR_2	1 */
-
 /*
  * memory layout - Example
  * CONFIG_SYS_TEXT_BASE = 0x1200_0000;	defined in config.mk
diff --git a/include/configs/sc_sps_1.h b/include/configs/sc_sps_1.h
index cb99d58..f807a61 100644
--- a/include/configs/sc_sps_1.h
+++ b/include/configs/sc_sps_1.h
@@ -160,7 +160,6 @@
 #define CONFIG_FEC_MXC
 #define CONFIG_FEC_MXC_MULTI
 #define CONFIG_MII
-#define CONFIG_DISCOVER_PHY
 #define CONFIG_FEC_XCV_TYPE		RMII
 #define CONFIG_PHYLIB
 #define CONFIG_PHY_SMSC
diff --git a/include/configs/t4qds.h b/include/configs/t4qds.h
index d58c24c..2c665b8 100644
--- a/include/configs/t4qds.h
+++ b/include/configs/t4qds.h
@@ -213,14 +213,14 @@ unsigned long get_board_ddr_clk(void);
 /* NOR Flash Timing Params */
 #define CONFIG_SYS_NOR_CSOR	CSOR_NAND_TRHZ_80
 
-#define CONFIG_SYS_NOR_FTIM0	(FTIM0_NOR_TACSE(0x01) | \
-				FTIM0_NOR_TEADC(0x01) | \
-				FTIM0_NOR_TEAHC(0x20))
+#define CONFIG_SYS_NOR_FTIM0	(FTIM0_NOR_TACSE(0x4) | \
+				FTIM0_NOR_TEADC(0x5) | \
+				FTIM0_NOR_TEAHC(0x5))
 #define CONFIG_SYS_NOR_FTIM1	(FTIM1_NOR_TACO(0x35) | \
 				FTIM1_NOR_TRAD_NOR(0x1A) |\
 				FTIM1_NOR_TSEQRAD_NOR(0x13))
-#define CONFIG_SYS_NOR_FTIM2	(FTIM2_NOR_TCS(0x01) | \
-				FTIM2_NOR_TCH(0x0E) | \
+#define CONFIG_SYS_NOR_FTIM2	(FTIM2_NOR_TCS(0x4) | \
+				FTIM2_NOR_TCH(0x4) | \
 				FTIM2_NOR_TWPH(0x0E) | \
 				FTIM2_NOR_TWP(0x1c))
 #define CONFIG_SYS_NOR_FTIM3	0x0
@@ -259,7 +259,7 @@ unsigned long get_board_ddr_clk(void);
 				| CSPR_PORT_SIZE_8 \
 				| CSPR_MSEL_GPCM \
 				| CSPR_V)
-#define CONFIG_SYS_AMASK3	IFC_AMASK(64*1024)
+#define CONFIG_SYS_AMASK3	IFC_AMASK(4 * 1024)
 #define CONFIG_SYS_CSOR3	0x0
 /* QIXIS Timing parameters for IFC CS3 */
 #define CONFIG_SYS_CS3_FTIM0		(FTIM0_GPCM_TACSE(0x0e) | \
diff --git a/include/fat.h b/include/fat.h
index 706cd7a..b28c3fd 100644
--- a/include/fat.h
+++ b/include/fat.h
@@ -98,9 +98,6 @@
 #endif
 #endif
 
-#define TOLOWER(c)	if((c) >= 'A' && (c) <= 'Z'){(c)+=('a' - 'A');}
-#define TOUPPER(c)	if ((c) >= 'a' && (c) <= 'z') \
-				(c) -= ('a' - 'A');
 #define START(dent)	(FAT2CPU16((dent)->start) \
 			+ (mydata->fatsize != 32 ? 0 : \
 			  (FAT2CPU16((dent)->starthi) << 16)))
diff --git a/include/stdio_dev.h b/include/stdio_dev.h
index 932d093..9451740 100644
--- a/include/stdio_dev.h
+++ b/include/stdio_dev.h
@@ -99,7 +99,7 @@ struct list_head* stdio_get_list(void);
 struct stdio_dev* stdio_get_by_name(const char* name);
 struct stdio_dev* stdio_clone(struct stdio_dev *dev);
 
-#ifdef CONFIG_ARM_DCC_MULTI
+#ifdef CONFIG_ARM_DCC
 int drv_arm_dcc_init(void);
 #endif
 #ifdef CONFIG_LCD