MX: Set a common gpio.h for all i.MX

Each i.MX has its own gpio.h, defining the same structure.
The internal GPIO controller has the same layout
(at least for the register used by u-boot) and can be shared.

Signed-off-by: Stefano Babic <sbabic@denx.de>
Tested-by: Matt Sealey <matt@genesi-usa.com>

11 files changed, 78 insertions, 80 deletions

diff --git a/arch/arm/include/asm/arch-mx25/gpio.h b/arch/arm/include/asm/arch-mx25/gpio.h
index dc6edc7..61c0b0d 100644
--- a/arch/arm/include/asm/arch-mx25/gpio.h
+++ b/arch/arm/include/asm/arch-mx25/gpio.h
@@ -25,21 +25,6 @@
 #ifndef __ASM_ARCH_MX25_GPIO_H
 #define __ASM_ARCH_MX25_GPIO_H
 
-/* Converts a GPIO port number and the internal bit position
- * to the GPIO number
- */
-#define MXC_GPIO_PORT_TO_NUM(port, bit) (((port - 1) << 5) + (bit & 0x1f))
-
-/* GPIO registers */
-struct gpio_regs {
-	u32 gpio_dr;	/* data */
-	u32 gpio_dir;	/* direction */
-	u32 psr;	/* pad satus */
-	u32 icr1;	/* interrupt config 1 */
-	u32 icr2;	/* interrupt config 2 */
-	u32 imr;	/* interrupt mask */
-	u32 isr;	/* interrupt status */
-	u32 edge_sel;	/* edge select */
-};
+#include <asm/imx-common/gpio.h>
 
 #endif
diff --git a/arch/arm/include/asm/arch-mx31/gpio.h b/arch/arm/include/asm/arch-mx31/gpio.h
index 95b73bf..55c0afa 100644
--- a/arch/arm/include/asm/arch-mx31/gpio.h
+++ b/arch/arm/include/asm/arch-mx31/gpio.h
@@ -25,11 +25,6 @@
 #ifndef __ASM_ARCH_MX31_GPIO_H
 #define __ASM_ARCH_MX31_GPIO_H
 
-/* GPIO Registers */
-struct gpio_regs {
-	u32	gpio_dr;
-	u32	gpio_dir;
-	u32	gpio_psr;
-};
+#include <asm/imx-common/gpio.h>
 
 #endif
diff --git a/arch/arm/include/asm/arch-mx35/gpio.h b/arch/arm/include/asm/arch-mx35/gpio.h
index 7bcc3e8..1deb292 100644
--- a/arch/arm/include/asm/arch-mx35/gpio.h
+++ b/arch/arm/include/asm/arch-mx35/gpio.h
@@ -25,16 +25,6 @@
 #ifndef __ASM_ARCH_MX35_GPIO_H
 #define __ASM_ARCH_MX35_GPIO_H
 
-/* GPIO registers */
-struct gpio_regs {
-	u32 gpio_dr;	/* data */
-	u32 gpio_dir;	/* direction */
-	u32 psr;	/* pad satus */
-	u32 icr1;	/* interrupt config 1 */
-	u32 icr2;	/* interrupt config 2 */
-	u32 imr;	/* interrupt mask */
-	u32 isr;	/* interrupt status */
-	u32 edge_sel;	/* edge select */
-};
+#include <asm/imx-common/gpio.h>
 
 #endif
diff --git a/arch/arm/include/asm/arch-mx5/gpio.h b/arch/arm/include/asm/arch-mx5/gpio.h
index 1dc34e9..b1b1218 100644
--- a/arch/arm/include/asm/arch-mx5/gpio.h
+++ b/arch/arm/include/asm/arch-mx5/gpio.h
@@ -25,11 +25,6 @@
 #ifndef __ASM_ARCH_MX5_GPIO_H
 #define __ASM_ARCH_MX5_GPIO_H
 
-/* GPIO registers */
-struct gpio_regs {
-	u32	gpio_dr;
-	u32	gpio_dir;
-	u32	gpio_psr;
-};
+#include <asm/imx-common/gpio.h>
 
 #endif
diff --git a/arch/arm/include/asm/arch-mx6/gpio.h b/arch/arm/include/asm/arch-mx6/gpio.h
index 20c4e57..24c10f8 100644
--- a/arch/arm/include/asm/arch-mx6/gpio.h
+++ b/arch/arm/include/asm/arch-mx6/gpio.h
@@ -25,11 +25,6 @@
 #ifndef __ASM_ARCH_MX6_GPIO_H
 #define __ASM_ARCH_MX6_GPIO_H
 
-/* GPIO registers */
-struct gpio_regs {
-	u32	gpio_dr;
-	u32	gpio_dir;
-	u32	gpio_psr;
-};
+#include <asm/imx-common/gpio.h>
 
 #endif	/* __ASM_ARCH_MX6_GPIO_H */
diff --git a/arch/arm/include/asm/arch-mx6/imx-regs.h b/arch/arm/include/asm/arch-mx6/imx-regs.h
index dacb9ea..b89dfe5 100644
--- a/arch/arm/include/asm/arch-mx6/imx-regs.h
+++ b/arch/arm/include/asm/arch-mx6/imx-regs.h
@@ -172,8 +172,6 @@
 #define IMX_IIM_BASE                 OCOTP_BASE_ADDR
 #define FEC_QUIRK_ENET_MAC
 
-#define GPIO_NUMBER(port, index)		((((port)-1)*32)+((index)&31))
-
 #if !(defined(__KERNEL_STRICT_NAMES) || defined(__ASSEMBLY__))
 #include <asm/types.h>
 
diff --git a/arch/arm/include/asm/imx-common/gpio.h b/arch/arm/include/asm/imx-common/gpio.h
new file mode 100644
index 0000000..65226d9
--- /dev/null
+++ b/arch/arm/include/asm/imx-common/gpio.h
@@ -0,0 +1,39 @@
+/*
+ * Copyright (C) 2011
+ * Stefano Babic, DENX Software Engineering, <sbabic@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+
+#ifndef __ASM_ARCH_IMX_GPIO_H
+#define __ASM_ARCH_IMX_GPIO_H
+
+#if !(defined(__KERNEL_STRICT_NAMES) || defined(__ASSEMBLY__))
+/* GPIO registers */
+struct gpio_regs {
+	u32 gpio_dr;	/* data */
+	u32 gpio_dir;	/* direction */
+	u32 gpio_psr;	/* pad satus */
+};
+#endif
+
+#define IMX_GPIO_NR(port, index)		((((port)-1)*32)+((index)&31))
+
+#endif
diff --git a/board/freescale/mx6qsabrelite/mx6qsabrelite.c b/board/freescale/mx6qsabrelite/mx6qsabrelite.c
index cb85597..db0de63 100644
--- a/board/freescale/mx6qsabrelite/mx6qsabrelite.c
+++ b/board/freescale/mx6qsabrelite/mx6qsabrelite.c
@@ -87,12 +87,12 @@ struct i2c_pads_info i2c_pad_info0 = {
 	.scl = {
 		.i2c_mode = MX6Q_PAD_EIM_D21__I2C1_SCL | PC,
 		.gpio_mode = MX6Q_PAD_EIM_D21__GPIO_3_21 | PC,
-		.gp = GPIO_NUMBER(3, 21)
+		.gp = IMX_GPIO_NR(3, 21)
 	},
 	.sda = {
 		.i2c_mode = MX6Q_PAD_EIM_D28__I2C1_SDA | PC,
 		.gpio_mode = MX6Q_PAD_EIM_D28__GPIO_3_28 | PC,
-		.gp = GPIO_NUMBER(3, 28)
+		.gp = IMX_GPIO_NR(3, 28)
 	}
 };
 
@@ -101,12 +101,12 @@ struct i2c_pads_info i2c_pad_info1 = {
 	.scl = {
 		.i2c_mode = MX6Q_PAD_KEY_COL3__I2C2_SCL | PC,
 		.gpio_mode = MX6Q_PAD_KEY_COL3__GPIO_4_12 | PC,
-		.gp = GPIO_NUMBER(4, 12)
+		.gp = IMX_GPIO_NR(4, 12)
 	},
 	.sda = {
 		.i2c_mode = MX6Q_PAD_KEY_ROW3__I2C2_SDA | PC,
 		.gpio_mode = MX6Q_PAD_KEY_ROW3__GPIO_4_13 | PC,
-		.gp = GPIO_NUMBER(4, 13)
+		.gp = IMX_GPIO_NR(4, 13)
 	}
 };
 
@@ -115,12 +115,12 @@ struct i2c_pads_info i2c_pad_info2 = {
 	.scl = {
 		.i2c_mode = MX6Q_PAD_GPIO_5__I2C3_SCL | PC,
 		.gpio_mode = MX6Q_PAD_GPIO_5__GPIO_1_5 | PC,
-		.gp = GPIO_NUMBER(1, 5)
+		.gp = IMX_GPIO_NR(1, 5)
 	},
 	.sda = {
 		.i2c_mode = MX6Q_PAD_GPIO_16__I2C3_SDA | PC,
 		.gpio_mode = MX6Q_PAD_GPIO_16__GPIO_7_11 | PC,
-		.gp = GPIO_NUMBER(7, 11)
+		.gp = IMX_GPIO_NR(7, 11)
 	}
 };
 
@@ -229,9 +229,9 @@ int board_ehci_hcd_init(int port)
 	imx_iomux_v3_setup_multiple_pads(usb_pads, ARRAY_SIZE(usb_pads));
 
 	/* Reset USB hub */
-	gpio_direction_output(GPIO_NUMBER(7, 12), 0);
+	gpio_direction_output(IMX_GPIO_NR(7, 12), 0);
 	mdelay(2);
-	gpio_set_value(GPIO_NUMBER(7, 12), 1);
+	gpio_set_value(IMX_GPIO_NR(7, 12), 1);
 
 	return 0;
 }
@@ -413,12 +413,12 @@ struct button_key {
 };
 
 static struct button_key const buttons[] = {
-	{"back",	GPIO_NUMBER(2, 2),	'B'},
-	{"home",	GPIO_NUMBER(2, 4),	'H'},
-	{"menu",	GPIO_NUMBER(2, 1),	'M'},
-	{"search",	GPIO_NUMBER(2, 3),	'S'},
-	{"volup",	GPIO_NUMBER(7, 13),	'V'},
-	{"voldown",	GPIO_NUMBER(4, 5),	'v'},
+	{"back",	IMX_GPIO_NR(2, 2),	'B'},
+	{"home",	IMX_GPIO_NR(2, 4),	'H'},
+	{"menu",	IMX_GPIO_NR(2, 1),	'M'},
+	{"search",	IMX_GPIO_NR(2, 3),	'S'},
+	{"volup",	IMX_GPIO_NR(7, 13),	'V'},
+	{"voldown",	IMX_GPIO_NR(4, 5),	'v'},
 };
 
 /*
diff --git a/board/karo/tx25/tx25.c b/board/karo/tx25/tx25.c
index 07fd98d..0fd41c7 100644
--- a/board/karo/tx25/tx25.c
+++ b/board/karo/tx25/tx25.c
@@ -34,8 +34,8 @@
 DECLARE_GLOBAL_DATA_PTR;
 
 #ifdef CONFIG_FEC_MXC
-#define GPIO_FEC_RESET_B	MXC_GPIO_PORT_TO_NUM(4, 7)
-#define GPIO_FEC_ENABLE_B	MXC_GPIO_PORT_TO_NUM(4, 9)
+#define GPIO_FEC_RESET_B	IMX_GPIO_NR(4, 7)
+#define GPIO_FEC_ENABLE_B	IMX_GPIO_NR(4, 9)
 void tx25_fec_init(void)
 {
 	struct iomuxc_mux_ctl *muxctl;
@@ -103,9 +103,9 @@ void tx25_fec_init(void)
 	/*
 	 * set each to 1 and make each an output
 	 */
-	gpio_direction_output(MXC_GPIO_PORT_TO_NUM(3, 10), 1);
-	gpio_direction_output(MXC_GPIO_PORT_TO_NUM(3, 11), 1);
-	gpio_direction_output(MXC_GPIO_PORT_TO_NUM(3, 12), 1);
+	gpio_direction_output(IMX_GPIO_NR(3, 10), 1);
+	gpio_direction_output(IMX_GPIO_NR(3, 11), 1);
+	gpio_direction_output(IMX_GPIO_NR(3, 12), 1);
 
 	mdelay(22);		/* this value came from RedBoot */
 
diff --git a/board/syteco/zmx25/zmx25.c b/board/syteco/zmx25/zmx25.c
index c56b195..fe5589d 100644
--- a/board/syteco/zmx25/zmx25.c
+++ b/board/syteco/zmx25/zmx25.c
@@ -56,7 +56,7 @@ int board_init()
 
 	/* Setup of core volatage selection pin to run at 1.4V */
 	writel(gpio_mux_mode5, &muxctl->pad_ext_armclk); /* VCORE GPIO3[15] */
-	gpio_direction_output(MXC_GPIO_PORT_TO_NUM(3, 15), 1);
+	gpio_direction_output(IMX_GPIO_NR(3, 15), 1);
 
 	/* Setup of input daisy chains for SD card pins*/
 	writel(gpio_mux_mode0_sion, &muxctl->pad_sd1_cmd);
@@ -68,10 +68,10 @@ int board_init()
 
 	/* Setup of digital output for USB power and OC */
 	writel(gpio_mux_mode5, &muxctl->pad_csi_d3); /* USB Power GPIO1[28] */
-	gpio_direction_output(MXC_GPIO_PORT_TO_NUM(1, 28), 1);
+	gpio_direction_output(IMX_GPIO_NR(1, 28), 1);
 
 	writel(gpio_mux_mode5, &muxctl->pad_csi_d2); /* USB OC GPIO1[27] */
-	gpio_direction_input(MXC_GPIO_PORT_TO_NUM(1, 18));
+	gpio_direction_input(IMX_GPIO_NR(1, 18));
 
 	/* Setup of digital output control pins */
 	writel(gpio_mux_mode5, &muxctl->pad_csi_d8); /* Ouput 1 Ctrl GPIO1[7] */
@@ -83,21 +83,21 @@ int board_init()
 	writel(0, &padctl->pad_csi_d5); /* Ouput 2 Stat pull up off */
 
 	/* Switch both output drivers off */
-	gpio_direction_output(MXC_GPIO_PORT_TO_NUM(1, 7), 0);
-	gpio_direction_output(MXC_GPIO_PORT_TO_NUM(1, 6), 0);
+	gpio_direction_output(IMX_GPIO_NR(1, 7), 0);
+	gpio_direction_output(IMX_GPIO_NR(1, 6), 0);
 
 	/* Setup of key input pin GPIO2[29]*/
 	writel(gpio_mux_mode5 | MX25_PIN_MUX_SION, &muxctl->pad_kpp_row0);
 	writel(0, &padctl->pad_kpp_row0); /* Key pull up off */
-	gpio_direction_input(MXC_GPIO_PORT_TO_NUM(2, 29));
+	gpio_direction_input(IMX_GPIO_NR(2, 29));
 
 	/* Setup of status LED outputs */
 	writel(gpio_mux_mode5, &muxctl->pad_csi_d9);	/* GPIO4[21] */
 	writel(gpio_mux_mode5, &muxctl->pad_csi_d4);	/* GPIO1[29] */
 
 	/* Switch both LEDs off */
-	gpio_direction_output(MXC_GPIO_PORT_TO_NUM(4, 21), 0);
-	gpio_direction_output(MXC_GPIO_PORT_TO_NUM(1, 29), 0);
+	gpio_direction_output(IMX_GPIO_NR(4, 21), 0);
+	gpio_direction_output(IMX_GPIO_NR(1, 29), 0);
 
 	/* Setup of CAN1 and CAN2 signals */
 	writel(gpio_mux_mode6, &muxctl->pad_gpio_a);	/* CAN1 TX */
@@ -148,12 +148,12 @@ int board_late_init(void)
 	writel(gpio_mux_mode2, &muxctl->pad_uart2_cts);
 
 	/* assert PHY reset (low) */
-	gpio_direction_output(MXC_GPIO_PORT_TO_NUM(3, 16), 0);
+	gpio_direction_output(IMX_GPIO_NR(3, 16), 0);
 
 	udelay(5000);
 
 	/* deassert PHY reset */
-	gpio_set_value(MXC_GPIO_PORT_TO_NUM(3, 16), 1);
+	gpio_set_value(IMX_GPIO_NR(3, 16), 1);
 
 	udelay(5000);
 #endif
@@ -161,12 +161,12 @@ int board_late_init(void)
 	e = getenv("gs_base_board");
 	if (e != NULL) {
 		if (strcmp(e, "G283") == 0) {
-			int key = gpio_get_value(MXC_GPIO_PORT_TO_NUM(2, 29));
+			int key = gpio_get_value(IMX_GPIO_NR(2, 29));
 
 			if (key) {
 				/* Switch on both LEDs to inidcate boot mode */
-				gpio_set_value(MXC_GPIO_PORT_TO_NUM(1, 29), 0);
-				gpio_set_value(MXC_GPIO_PORT_TO_NUM(4, 21), 0);
+				gpio_set_value(IMX_GPIO_NR(1, 29), 0);
+				gpio_set_value(IMX_GPIO_NR(4, 21), 0);
 
 				setenv("preboot", "run gs_slow_boot");
 			} else
diff --git a/include/configs/mx6qsabrelite.h b/include/configs/mx6qsabrelite.h
index 8cd9a63..72d0154 100644
--- a/include/configs/mx6qsabrelite.h
+++ b/include/configs/mx6qsabrelite.h
@@ -31,6 +31,7 @@
 #define CONFIG_MACH_TYPE	3769
 
 #include <asm/arch/imx-regs.h>
+#include <asm/imx-common/gpio.h>
 
 #define CONFIG_CMDLINE_TAG
 #define CONFIG_SETUP_MEMORY_TAGS
@@ -53,7 +54,7 @@
 #define CONFIG_SPI_FLASH_SST
 #define CONFIG_MXC_SPI
 #define CONFIG_SF_DEFAULT_BUS  0
-#define CONFIG_SF_DEFAULT_CS   (0|(GPIO_NUMBER(3, 19)<<8))
+#define CONFIG_SF_DEFAULT_CS   (0|(IMX_GPIO_NR(3, 19)<<8))
 #define CONFIG_SF_DEFAULT_SPEED 25000000
 #define CONFIG_SF_DEFAULT_MODE (SPI_MODE_0)
 #endif