powerpc: mpc5xxx: remove BC3450 board support

This has not been converted to Generic Board, so should be removed.
(See doc/README.generic-board for details.)

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

10 files changed, 8 insertions, 1987 deletions

diff --git a/arch/powerpc/cpu/mpc5xxx/Kconfig b/arch/powerpc/cpu/mpc5xxx/Kconfig
index 9da00da..1b81fb5 100644
--- a/arch/powerpc/cpu/mpc5xxx/Kconfig
+++ b/arch/powerpc/cpu/mpc5xxx/Kconfig
@@ -14,9 +14,6 @@ config TARGET_A3M071
 config TARGET_A4M072
 	bool "Support a4m072"
 
-config TARGET_BC3450
-	bool "Support BC3450"
-
 config TARGET_CANMB
 	bool "Support canmb"
 
@@ -84,7 +81,6 @@ endchoice
 
 source "board/a3m071/Kconfig"
 source "board/a4m072/Kconfig"
-source "board/bc3450/Kconfig"
 source "board/canmb/Kconfig"
 source "board/cm5200/Kconfig"
 source "board/galaxy5200/Kconfig"
diff --git a/board/bc3450/Kconfig b/board/bc3450/Kconfig
deleted file mode 100644
index a0fc19f..0000000
--- a/board/bc3450/Kconfig
+++ /dev/null
@@ -1,9 +0,0 @@
-if TARGET_BC3450
-
-config SYS_BOARD
-	default "bc3450"
-
-config SYS_CONFIG_NAME
-	default "BC3450"
-
-endif
diff --git a/board/bc3450/MAINTAINERS b/board/bc3450/MAINTAINERS
deleted file mode 100644
index 81a7076..0000000
--- a/board/bc3450/MAINTAINERS
+++ /dev/null
@@ -1,6 +0,0 @@
-BC3450 BOARD
-#M:	-
-S:	Maintained
-F:	board/bc3450/
-F:	include/configs/BC3450.h
-F:	configs/BC3450_defconfig
diff --git a/board/bc3450/Makefile b/board/bc3450/Makefile
deleted file mode 100644
index b8d22ba..0000000
--- a/board/bc3450/Makefile
+++ /dev/null
@@ -1,8 +0,0 @@
-#
-# (C) Copyright 2003-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-obj-y	:= bc3450.o cmd_bc3450.o
diff --git a/board/bc3450/bc3450.c b/board/bc3450/bc3450.c
deleted file mode 100644
index a5c6d75..0000000
--- a/board/bc3450/bc3450.c
+++ /dev/null
@@ -1,586 +0,0 @@
-/*
- * (C) Copyright 2003-2004
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * (C) Copyright 2004
- * Mark Jonas, Freescale Semiconductor, mark.jonas@motorola.com.
- *
- * (C) Copyright 2004-2005
- * Martin Krause, TQ-Systems GmbH, martin.krause@tqs.de
- *
- * (C) Copyright 2006
- * Stefan Strobl, GERSYS GmbH, stefan.strobl@gersys.de
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <mpc5xxx.h>
-#include <pci.h>
-#include <netdev.h>
-
-#ifdef CONFIG_VIDEO_SM501
-#include <sm501.h>
-#endif
-
-#if defined(CONFIG_MPC5200_DDR)
-#include "mt46v16m16-75.h"
-#else
-#include "mt48lc16m16a2-75.h"
-#endif
-
-#ifdef CONFIG_RTC_MPC5200
-#include <rtc.h>
-#endif
-
-#ifdef CONFIG_PS2MULT
-void ps2mult_early_init(void);
-#endif
-
-#ifndef CONFIG_SYS_RAMBOOT
-static void sdram_start (int hi_addr)
-{
-	long hi_addr_bit = hi_addr ? 0x01000000 : 0;
-
-	/* unlock mode register */
-	*(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000000 |
-		hi_addr_bit;
-	__asm__ volatile ("sync");
-
-	/* precharge all banks */
-	*(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000002 |
-		hi_addr_bit;
-	__asm__ volatile ("sync");
-
-#if SDRAM_DDR
-	/* set mode register: extended mode */
-	*(vu_long *)MPC5XXX_SDRAM_MODE = SDRAM_EMODE;
-	__asm__ volatile ("sync");
-
-	/* set mode register: reset DLL */
-	*(vu_long *)MPC5XXX_SDRAM_MODE = SDRAM_MODE | 0x04000000;
-	__asm__ volatile ("sync");
-#endif
-
-	/* precharge all banks */
-	*(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000002 |
-		hi_addr_bit;
-	__asm__ volatile ("sync");
-
-	/* auto refresh */
-	*(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000004 |
-		hi_addr_bit;
-	__asm__ volatile ("sync");
-
-	/* set mode register */
-	*(vu_long *)MPC5XXX_SDRAM_MODE = SDRAM_MODE;
-	__asm__ volatile ("sync");
-
-	/* normal operation */
-	*(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | hi_addr_bit;
-	__asm__ volatile ("sync");
-}
-#endif
-
-/*
- * ATTENTION: Although partially referenced initdram does NOT make real use
- *	      use of CONFIG_SYS_SDRAM_BASE. The code does not work if CONFIG_SYS_SDRAM_BASE
- *	      is something else than 0x00000000.
- */
-
-phys_size_t initdram (int board_type)
-{
-	ulong dramsize = 0;
-	ulong dramsize2 = 0;
-#ifndef CONFIG_SYS_RAMBOOT
-	ulong test1, test2;
-
-	/* setup SDRAM chip selects */
-	*(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0x0000001c; /* 512MB at 0x0 */
-	*(vu_long *)MPC5XXX_SDRAM_CS1CFG = 0x40000000; /* disabled */
-	__asm__ volatile ("sync");
-
-	/* setup config registers */
-	*(vu_long *)MPC5XXX_SDRAM_CONFIG1 = SDRAM_CONFIG1;
-	*(vu_long *)MPC5XXX_SDRAM_CONFIG2 = SDRAM_CONFIG2;
-	__asm__ volatile ("sync");
-
-#if SDRAM_DDR
-	/* set tap delay */
-	*(vu_long *)MPC5XXX_CDM_PORCFG = SDRAM_TAPDELAY;
-	__asm__ volatile ("sync");
-#endif
-
-	/* find RAM size using SDRAM CS0 only */
-	sdram_start(0);
-	test1 = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, 0x20000000);
-	sdram_start(1);
-	test2 = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, 0x20000000);
-	if (test1 > test2) {
-		sdram_start(0);
-		dramsize = test1;
-	} else {
-		dramsize = test2;
-	}
-
-	/* memory smaller than 1MB is impossible */
-	if (dramsize < (1 << 20)) {
-		dramsize = 0;
-	}
-
-	/* set SDRAM CS0 size according to the amount of RAM found */
-	if (dramsize > 0) {
-		*(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0x13 +
-			__builtin_ffs(dramsize >> 20) - 1;
-	} else {
-		*(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0; /* disabled */
-	}
-
-	/* let SDRAM CS1 start right after CS0 */
-	*(vu_long *)MPC5XXX_SDRAM_CS1CFG = dramsize + 0x0000001c; /* 512MB */
-
-	/* find RAM size using SDRAM CS1 only */
-	sdram_start(0);
-	test1 = get_ram_size((long *)(CONFIG_SYS_SDRAM_BASE + dramsize), 0x20000000);
-	sdram_start(1);
-	test2 = get_ram_size((long *)(CONFIG_SYS_SDRAM_BASE + dramsize), 0x20000000);
-	if (test1 > test2) {
-		sdram_start(0);
-		dramsize2 = test1;
-	} else {
-		dramsize2 = test2;
-	}
-
-	/* memory smaller than 1MB is impossible */
-	if (dramsize2 < (1 << 20)) {
-		dramsize2 = 0;
-	}
-
-	/* set SDRAM CS1 size according to the amount of RAM found */
-	if (dramsize2 > 0) {
-		*(vu_long *)MPC5XXX_SDRAM_CS1CFG = dramsize
-			| (0x13 + __builtin_ffs(dramsize2 >> 20) - 1);
-	} else {
-		*(vu_long *)MPC5XXX_SDRAM_CS1CFG = dramsize; /* disabled */
-	}
-
-#else /* CONFIG_SYS_RAMBOOT */
-
-	/* retrieve size of memory connected to SDRAM CS0 */
-	dramsize = *(vu_long *)MPC5XXX_SDRAM_CS0CFG & 0xFF;
-	if (dramsize >= 0x13) {
-		dramsize = (1 << (dramsize - 0x13)) << 20;
-	} else {
-		dramsize = 0;
-	}
-
-	/* retrieve size of memory connected to SDRAM CS1 */
-	dramsize2 = *(vu_long *)MPC5XXX_SDRAM_CS1CFG & 0xFF;
-	if (dramsize2 >= 0x13) {
-		dramsize2 = (1 << (dramsize2 - 0x13)) << 20;
-	} else {
-		dramsize2 = 0;
-	}
-
-#endif /* CONFIG_SYS_RAMBOOT */
-
-	return dramsize;
-}
-
-int checkboard (void)
-{
-#if defined (CONFIG_TQM5200)
-	puts ("Board: TQM5200 (TQ-Components GmbH)\n");
-#endif
-
-#if defined (CONFIG_BC3450)
-	puts ("Dev:   GERSYS BC3450\n");
-#endif
-
-	return 0;
-}
-
-void flash_preinit(void)
-{
-	/*
-	 * Now, when we are in RAM, enable flash write
-	 * access for detection process.
-	 * Note that CS_BOOT cannot be cleared when
-	 * executing in flash.
-	 */
-	*(vu_long *)MPC5XXX_BOOTCS_CFG &= ~0x1;		/* clear RO	   */
-}
-
-
-#ifdef	CONFIG_PCI
-static struct pci_controller hose;
-
-extern void pci_mpc5xxx_init(struct pci_controller *);
-
-void pci_init_board(void)
-{
-	pci_mpc5xxx_init(&hose);
-}
-#endif
-
-#if defined(CONFIG_CMD_IDE) && defined(CONFIG_IDE_RESET)
-
-void init_ide_reset (void)
-{
-	debug ("init_ide_reset\n");
-
-	/* Configure PSC1_4 as GPIO output for ATA reset */
-	*(vu_long *) MPC5XXX_WU_GPIO_ENABLE |= GPIO_PSC1_4;
-	*(vu_long *) MPC5XXX_WU_GPIO_DIR    |= GPIO_PSC1_4;
-}
-
-void ide_set_reset (int idereset)
-{
-	debug ("ide_reset(%d)\n", idereset);
-
-	if (idereset) {
-		*(vu_long *) MPC5XXX_WU_GPIO_DATA_O &= ~GPIO_PSC1_4;
-	} else {
-		*(vu_long *) MPC5XXX_WU_GPIO_DATA_O |=  GPIO_PSC1_4;
-	}
-}
-#endif
-
-#ifdef CONFIG_POST
-/*
- * Reads GPIO pin PSC6_3. A keypress is reported, if PSC6_3 is low. If PSC6_3
- * is left open, no keypress is detected.
- */
-int post_hotkeys_pressed(void)
-{
-	struct mpc5xxx_gpio *gpio;
-
-	gpio = (struct mpc5xxx_gpio*) MPC5XXX_GPIO;
-
-	/*
-	 * Configure PSC6_1 and PSC6_3 as GPIO. PSC6 then couldn't be used in
-	 * CODEC or UART mode. Consumer IrDA should still be possible.
-	 */
-	gpio->port_config &= ~(0x07000000);
-	gpio->port_config |=   0x03000000;
-
-	/* Enable GPIO for GPIO_IRDA_1 (IR_USB_CLK pin) = PSC6_3 */
-	gpio->simple_gpioe |= 0x20000000;
-
-	/* Configure GPIO_IRDA_1 as input */
-	gpio->simple_ddr &= ~(0x20000000);
-
-	return ((gpio->simple_ival & 0x20000000) ? 0 : 1);
-}
-#endif
-
-#ifdef CONFIG_BOARD_EARLY_INIT_R
-int board_early_init_r (void)
-{
-#ifdef CONFIG_RTC_MPC5200
-	struct rtc_time t;
-
-	/* set to Wed Dec 31 19:00:00 1969 */
-	t.tm_sec = t.tm_min = 0;
-	t.tm_hour = 19;
-	t.tm_mday = 31;
-	t.tm_mon = 12;
-	t.tm_year = 1969;
-	t.tm_wday = 3;
-
-	rtc_set(&t);
-#endif /* CONFIG_RTC_MPC5200 */
-
-#ifdef CONFIG_PS2MULT
-	ps2mult_early_init();
-#endif /* CONFIG_PS2MULT */
-	return (0);
-}
-#endif /* CONFIG_BOARD_EARLY_INIT_R */
-
-
-int last_stage_init (void)
-{
-	/*
-	 * auto scan for really existing devices and re-set chip select
-	 * configuration.
-	 */
-	u16 save, tmp;
-	int restore;
-
-	/*
-	 * Check for SRAM and SRAM size
-	 */
-
-	/* save original SRAM content  */
-	save = *(volatile u16 *)CONFIG_SYS_CS2_START;
-	restore = 1;
-
-	/* write test pattern to SRAM */
-	*(volatile u16 *)CONFIG_SYS_CS2_START = 0xA5A5;
-	__asm__ volatile ("sync");
-	/*
-	 * Put a different pattern on the data lines: otherwise they may float
-	 * long enough to read back what we wrote.
-	 */
-	tmp = *(volatile u16 *)CONFIG_SYS_FLASH_BASE;
-	if (tmp == 0xA5A5)
-		puts ("!! possible error in SRAM detection\n");
-
-	if (*(volatile u16 *)CONFIG_SYS_CS2_START != 0xA5A5) {
-		/* no SRAM at all, disable cs */
-		*(vu_long *)MPC5XXX_ADDECR &= ~(1 << 18);
-		*(vu_long *)MPC5XXX_CS2_START = 0x0000FFFF;
-		*(vu_long *)MPC5XXX_CS2_STOP = 0x0000FFFF;
-		restore = 0;
-		__asm__ volatile ("sync");
-	} else if (*(volatile u16 *)(CONFIG_SYS_CS2_START + (1<<19)) == 0xA5A5) {
-		/* make sure that we access a mirrored address */
-		*(volatile u16 *)CONFIG_SYS_CS2_START = 0x1111;
-		__asm__ volatile ("sync");
-		if (*(volatile u16 *)(CONFIG_SYS_CS2_START + (1<<19)) == 0x1111) {
-			/* SRAM size = 512 kByte */
-			*(vu_long *)MPC5XXX_CS2_STOP = STOP_REG(CONFIG_SYS_CS2_START,
-								0x80000);
-			__asm__ volatile ("sync");
-			puts ("SRAM:  512 kB\n");
-		}
-		else
-			puts ("!! possible error in SRAM detection\n");
-	} else {
-		puts ("SRAM:  1 MB\n");
-	}
-	/* restore origianl SRAM content  */
-	if (restore) {
-		*(volatile u16 *)CONFIG_SYS_CS2_START = save;
-		__asm__ volatile ("sync");
-	}
-
-	/*
-	 * Check for Grafic Controller
-	 */
-
-	/* save origianl FB content  */
-	save = *(volatile u16 *)CONFIG_SYS_CS1_START;
-	restore = 1;
-
-	/* write test pattern to FB memory */
-	*(volatile u16 *)CONFIG_SYS_CS1_START = 0xA5A5;
-	__asm__ volatile ("sync");
-	/*
-	 * Put a different pattern on the data lines: otherwise they may float
-	 * long enough to read back what we wrote.
-	 */
-	tmp = *(volatile u16 *)CONFIG_SYS_FLASH_BASE;
-	if (tmp == 0xA5A5)
-		puts ("!! possible error in grafic controller detection\n");
-
-	if (*(volatile u16 *)CONFIG_SYS_CS1_START != 0xA5A5) {
-		/* no grafic controller at all, disable cs */
-		*(vu_long *)MPC5XXX_ADDECR &= ~(1 << 17);
-		*(vu_long *)MPC5XXX_CS1_START = 0x0000FFFF;
-		*(vu_long *)MPC5XXX_CS1_STOP = 0x0000FFFF;
-		restore = 0;
-		__asm__ volatile ("sync");
-	} else {
-		puts ("VGA:   SMI501 (Voyager) with 8 MB\n");
-	}
-	/* restore origianl FB content	*/
-	if (restore) {
-		*(volatile u16 *)CONFIG_SYS_CS1_START = save;
-		__asm__ volatile ("sync");
-	}
-
-	return 0;
-}
-
-#ifdef CONFIG_VIDEO_SM501
-
-#define DISPLAY_WIDTH	640
-#define DISPLAY_HEIGHT	480
-
-#ifdef CONFIG_VIDEO_SM501_8BPP
-#error CONFIG_VIDEO_SM501_8BPP not supported.
-#endif /* CONFIG_VIDEO_SM501_8BPP */
-
-#ifdef CONFIG_VIDEO_SM501_16BPP
-#error CONFIG_VIDEO_SM501_16BPP not supported.
-#endif /* CONFIG_VIDEO_SM501_16BPP */
-
-#ifdef CONFIG_VIDEO_SM501_32BPP
-static const SMI_REGS init_regs [] =
-{
-#if defined (CONFIG_BC3450_FP) && !defined (CONFIG_BC3450_CRT)
-	/* FP only */
-	{0x00004, 0x0},
-	{0x00048, 0x00021807},
-	{0x0004C, 0x091a0a01},
-	{0x00054, 0x1},
-	{0x00040, 0x00021807},
-	{0x00044, 0x091a0a01},
-	{0x00054, 0x0},
-	{0x80000, 0x01013106},
-	{0x80004, 0xc428bb17},
-	{0x80000, 0x03013106},
-	{0x8000C, 0x00000000},
-	{0x80010, 0x0a000a00},
-	{0x80014, 0x02800000},
-	{0x80018, 0x01e00000},
-	{0x8001C, 0x00000000},
-	{0x80020, 0x01e00280},
-	{0x80024, 0x02fa027f},
-	{0x80028, 0x004a028b},
-	{0x8002C, 0x020c01df},
-	{0x80030, 0x000201e9},
-	{0x80200, 0x00010200},
-	{0x80000, 0x0f013106},
-#elif defined (CONFIG_BC3450_CRT) && !defined (CONFIG_BC3450_FP)
-	/* CRT only */
-	{0x00004, 0x0},
-	{0x00048, 0x00021807},
-	{0x0004C, 0x10090a01},
-	{0x00054, 0x1},
-	{0x00040, 0x00021807},
-	{0x00044, 0x10090a01},
-	{0x00054, 0x0},
-	{0x80200, 0x00010000},
-	{0x80204, 0x0},
-	{0x80208, 0x0A000A00},
-	{0x8020C, 0x02fa027f},
-	{0x80210, 0x004a028b},
-	{0x80214, 0x020c01df},
-	{0x80218, 0x000201e9},
-	{0x80200, 0x00013306},
-#else	/* panel + CRT */
-	{0x00004, 0x0},
-	{0x00048, 0x00021807},
-	{0x0004C, 0x091a0a01},
-	{0x00054, 0x1},
-	{0x00040, 0x00021807},
-	{0x00044, 0x091a0a01},
-	{0x00054, 0x0},
-	{0x80000, 0x0f013106},
-	{0x80004, 0xc428bb17},
-	{0x8000C, 0x00000000},
-	{0x80010, 0x0a000a00},
-	{0x80014, 0x02800000},
-	{0x80018, 0x01e00000},
-	{0x8001C, 0x00000000},
-	{0x80020, 0x01e00280},
-	{0x80024, 0x02fa027f},
-	{0x80028, 0x004a028b},
-	{0x8002C, 0x020c01df},
-	{0x80030, 0x000201e9},
-	{0x80200, 0x00010000},
-#endif
-	{0, 0}
-};
-#endif /* CONFIG_VIDEO_SM501_32BPP */
-
-#ifdef CONFIG_CONSOLE_EXTRA_INFO
-/*
- * Return text to be printed besides the logo.
- */
-void video_get_info_str (int line_number, char *info)
-{
-	if (line_number == 1) {
-#if defined (CONFIG_TQM5200)
-	    strcpy (info, " Board: TQM5200 (TQ-Components GmbH)");
-#else
-#error No supported board selected
-#endif /* CONFIG_TQM5200 */
-
-#if defined (CONFIG_BC3450)
-	} else if (line_number == 2) {
-	    strcpy (info, " Dev:   GERSYS BC3450");
-#endif /* CONFIG_BC3450 */
-	}
-	else {
-		info [0] = '\0';
-	}
-}
-#endif
-
-/*
- * Returns SM501 register base address. First thing called in the
- * driver. Checks if SM501 is physically present.
- */
-unsigned int board_video_init (void)
-{
-	u16 save, tmp;
-	int restore, ret;
-
-	/*
-	 * Check for Grafic Controller
-	 */
-
-	/* save origianl FB content  */
-	save = *(volatile u16 *)CONFIG_SYS_CS1_START;
-	restore = 1;
-
-	/* write test pattern to FB memory */
-	*(volatile u16 *)CONFIG_SYS_CS1_START = 0xA5A5;
-	__asm__ volatile ("sync");
-	/*
-	 * Put a different pattern on the data lines: otherwise they may float
-	 * long enough to read back what we wrote.
-	 */
-	tmp = *(volatile u16 *)CONFIG_SYS_FLASH_BASE;
-	if (tmp == 0xA5A5)
-		puts ("!! possible error in grafic controller detection\n");
-
-	if (*(volatile u16 *)CONFIG_SYS_CS1_START != 0xA5A5) {
-		/* no grafic controller found */
-		restore = 0;
-		ret = 0;
-	} else {
-	    ret = SM501_MMIO_BASE;
-	}
-
-	if (restore) {
-		*(volatile u16 *)CONFIG_SYS_CS1_START = save;
-		__asm__ volatile ("sync");
-	}
-	return ret;
-}
-
-/*
- * Returns SM501 framebuffer address
- */
-unsigned int board_video_get_fb (void)
-{
-	return SM501_FB_BASE;
-}
-
-/*
- * Called after initializing the SM501 and before clearing the screen.
- */
-void board_validate_screen (unsigned int base)
-{
-}
-
-/*
- * Return a pointer to the initialization sequence.
- */
-const SMI_REGS *board_get_regs (void)
-{
-	return init_regs;
-}
-
-int board_get_width (void)
-{
-	return DISPLAY_WIDTH;
-}
-
-int board_get_height (void)
-{
-	return DISPLAY_HEIGHT;
-}
-
-#endif /* CONFIG_VIDEO_SM501 */
-
-int board_eth_init(bd_t *bis)
-{
-	cpu_eth_init(bis); /* Built in FEC comes first */
-	return pci_eth_init(bis);
-}
diff --git a/board/bc3450/cmd_bc3450.c b/board/bc3450/cmd_bc3450.c
deleted file mode 100644
index 3c6e798..0000000
--- a/board/bc3450/cmd_bc3450.c
+++ /dev/null
@@ -1,805 +0,0 @@
-/*
- * (C) Copyright 2005
- * Stefan Strobl, GERSYS GmbH, stefan.strobl@gersys.de
- *
- * (C) Copyright 2005
- * Martin Krause, TQ-Systems GmbH, martin.krause@tqs.de.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <command.h>
-
-/*
- * BC3450 specific commands
- */
-#if defined(CONFIG_CMD_BSP)
-
-/*
- * Definitions for DS1620 chip
- */
-#define THERM_START_CONVERT	0xee
-#define THERM_RESET		0xaf
-#define THERM_READ_CONFIG	0xac
-#define THERM_READ_TEMP		0xaa
-#define THERM_READ_TL		0xa2
-#define THERM_READ_TH		0xa1
-#define THERM_WRITE_CONFIG	0x0c
-#define THERM_WRITE_TL		0x02
-#define THERM_WRITE_TH		0x01
-
-#define CONFIG_SYS_1SHOT		1
-#define CONFIG_SYS_STANDALONE		0
-
-struct therm {
-	int hi;
-	int lo;
-};
-
-/*
- * SM501 Register
- */
-#define SM501_GPIO_CTRL_LOW		0x00000008UL	/* gpio pins 0..31  */
-#define SM501_GPIO_CTRL_HIGH		0x0000000CUL	/* gpio pins 32..63 */
-#define SM501_POWER_MODE0_GATE		0x00000040UL
-#define SM501_POWER_MODE1_GATE		0x00000048UL
-#define POWER_MODE_GATE_GPIO_PWM_I2C	0x00000040UL
-#define SM501_GPIO_DATA_LOW		0x00010000UL
-#define SM501_GPIO_DATA_HIGH		0x00010004UL
-#define SM501_GPIO_DATA_DIR_LOW		0x00010008UL
-#define SM501_GPIO_DATA_DIR_HIGH	0x0001000CUL
-#define SM501_PANEL_DISPLAY_CONTROL	0x00080000UL
-#define SM501_CRT_DISPLAY_CONTROL	0x00080200UL
-
-/* SM501 CRT Display Control Bits */
-#define SM501_CDC_SEL			(1 << 9)
-#define SM501_CDC_TE			(1 << 8)
-#define SM501_CDC_E			(1 << 2)
-
-/* SM501 Panel Display Control Bits */
-#define SM501_PDC_FPEN			(1 << 27)
-#define SM501_PDC_BIAS			(1 << 26)
-#define SM501_PDC_DATA			(1 << 25)
-#define SM501_PDC_VDDEN			(1 << 24)
-
-/* SM501 GPIO Data LOW Bits */
-#define SM501_GPIO24			0x01000000
-#define SM501_GPIO25			0x02000000
-#define SM501_GPIO26			0x04000000
-#define SM501_GPIO27			0x08000000
-#define SM501_GPIO28			0x10000000
-#define SM501_GPIO29			0x20000000
-#define SM501_GPIO30			0x40000000
-#define SM501_GPIO31			0x80000000
-
-/* SM501 GPIO Data HIGH Bits */
-#define SM501_GPIO46			0x00004000
-#define SM501_GPIO47			0x00008000
-#define SM501_GPIO48			0x00010000
-#define SM501_GPIO49			0x00020000
-#define SM501_GPIO50			0x00040000
-#define SM501_GPIO51			0x00080000
-
-/* BC3450 GPIOs @ SM501 Data LOW */
-#define DIP				(SM501_GPIO24 | SM501_GPIO25 | SM501_GPIO26 | SM501_GPIO27)
-#define DS1620_DQ			SM501_GPIO29	/* I/O             */
-#define DS1620_CLK			SM501_GPIO30	/* High active O/P */
-#define DS1620_RES			SM501_GPIO31	/* Low active O/P  */
-/* BC3450 GPIOs @ SM501 Data HIGH */
-#define BUZZER				SM501_GPIO47	/* Low active O/P  */
-#define DS1620_TLOW			SM501_GPIO48	/* High active I/P */
-#define PWR_OFF				SM501_GPIO49	/* Low active O/P  */
-#define FP_DATA_TRI			SM501_GPIO50	/* High active O/P */
-
-
-/*
- * Initialise GPIO on SM501
- *
- * This function may be called from several other functions.
- * Yet, the initialisation sequence is executed only the first
- * time the function is called.
- */
-int sm501_gpio_init (void)
-{
-	static int init_done = 0;
-
-	if (init_done) {
-		debug("sm501_gpio_init: nothing to be done.\n");
-		return 1;
-	}
-
-	/* enable SM501 GPIO control (in both power modes) */
-	*(vu_long *) (SM501_MMIO_BASE + SM501_POWER_MODE0_GATE) |=
-		POWER_MODE_GATE_GPIO_PWM_I2C;
-	*(vu_long *) (SM501_MMIO_BASE + SM501_POWER_MODE1_GATE) |=
-		POWER_MODE_GATE_GPIO_PWM_I2C;
-
-	/* set up default O/Ps */
-	*(vu_long *) (SM501_MMIO_BASE + SM501_GPIO_DATA_LOW) &=
-		~(DS1620_RES | DS1620_CLK);
-	*(vu_long *) (SM501_MMIO_BASE + SM501_GPIO_DATA_LOW) |= DS1620_DQ;
-	*(vu_long *) (SM501_MMIO_BASE + SM501_GPIO_DATA_HIGH) &=
-		~(FP_DATA_TRI);
-	*(vu_long *) (SM501_MMIO_BASE + SM501_GPIO_DATA_HIGH) |=
-		(BUZZER | PWR_OFF);
-
-	/* configure directions for SM501 GPIO pins */
-	*(vu_long *) (SM501_MMIO_BASE + SM501_GPIO_CTRL_LOW) &= ~(0xFF << 24);
-	*(vu_long *) (SM501_MMIO_BASE + SM501_GPIO_CTRL_HIGH) &=
-		~(0x3F << 14);
-	*(vu_long *) (SM501_MMIO_BASE + SM501_GPIO_DATA_DIR_LOW) &=
-		~(DIP | DS1620_DQ);
-	*(vu_long *) (SM501_MMIO_BASE + SM501_GPIO_DATA_DIR_LOW) |=
-		(DS1620_RES | DS1620_CLK);
-	*(vu_long *) (SM501_MMIO_BASE + SM501_GPIO_DATA_DIR_HIGH) &=
-		~DS1620_TLOW;
-	*(vu_long *) (SM501_MMIO_BASE + SM501_GPIO_DATA_DIR_HIGH) |=
-		(PWR_OFF | BUZZER | FP_DATA_TRI);
-
-	init_done = 1;
-	debug("sm501_gpio_init: done.\n");
-
-	return 0;
-}
-
-
-/*
- * dip - read Config Inputs
- *
- * read and prints the dip switch
- * and/or external config inputs (4bits) 0...0x0F
- */
-int cmd_dip (cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[])
-{
-	vu_long rc = 0;
-
-	sm501_gpio_init ();
-
-	/* read dip switch */
-	rc = *(vu_long *) (SM501_MMIO_BASE + SM501_GPIO_DATA_LOW);
-	rc = ~rc;
-	rc &= DIP;
-	rc = (int) (rc >> 24);
-
-	/* plausibility check */
-	if (rc > 0x0F)
-		return -1;
-
-	printf ("0x%lx\n", rc);
-	return 0;
-}
-
-U_BOOT_CMD (dip, 1, 1, cmd_dip,
-	    "read dip switch and config inputs",
-	    "\n"
-	    "     - prints the state of the dip switch and/or\n"
-	    "       external configuration inputs as hex value.\n"
-	    "     - \"Config 1\" is the LSB");
-
-
-/*
- * buz - turns Buzzer on/off
- */
-#ifdef CONFIG_BC3450_BUZZER
-static int cmd_buz (cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[])
-{
-	if (argc != 2) {
-		printf ("Usage:\nspecify one argument: \"on\" or \"off\"\n");
-		return 1;
-	}
-
-	sm501_gpio_init ();
-
-	if (strncmp (argv[1], "on", 2) == 0) {
-		*(vu_long *) (SM501_MMIO_BASE + SM501_GPIO_DATA_HIGH) &=
-			~(BUZZER);
-		return 0;
-	} else if (strncmp (argv[1], "off", 3) == 0) {
-		*(vu_long *) (SM501_MMIO_BASE + SM501_GPIO_DATA_HIGH) |=
-			BUZZER;
-		return 0;
-	}
-	printf ("Usage:\nspecify one argument: \"on\" or \"off\"\n");
-	return 1;
-}
-
-U_BOOT_CMD (buz, 2, 1, cmd_buz,
-	    "turns buzzer on/off",
-	    "\n" "buz <on/off>\n" "     - turns the buzzer on or off");
-#endif /* CONFIG_BC3450_BUZZER */
-
-
-/*
- * fp - front panel commands
- */
-static int cmd_fp (cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[])
-{
-	sm501_gpio_init ();
-
-	if (strncmp (argv[1], "on", 2) == 0) {
-		/* turn on VDD first */
-		*(vu_long *) (SM501_MMIO_BASE +
-			      SM501_PANEL_DISPLAY_CONTROL) |= SM501_PDC_VDDEN;
-		udelay (1000);
-		/* then put data on */
-		*(vu_long *) (SM501_MMIO_BASE +
-			      SM501_PANEL_DISPLAY_CONTROL) |= SM501_PDC_DATA;
-		/* wait some time and enable backlight */
-		udelay (1000);
-		*(vu_long *) (SM501_MMIO_BASE +
-			      SM501_PANEL_DISPLAY_CONTROL) |= SM501_PDC_BIAS;
-		udelay (1000);
-		*(vu_long *) (SM501_MMIO_BASE +
-			      SM501_PANEL_DISPLAY_CONTROL) |= SM501_PDC_FPEN;
-		return 0;
-	} else if (strncmp (argv[1], "off", 3) == 0) {
-		/* turn off the backlight first */
-		*(vu_long *) (SM501_MMIO_BASE +
-			      SM501_PANEL_DISPLAY_CONTROL) &= ~SM501_PDC_FPEN;
-		udelay (1000);
-		*(vu_long *) (SM501_MMIO_BASE +
-			      SM501_PANEL_DISPLAY_CONTROL) &= ~SM501_PDC_BIAS;
-		udelay (200000);
-		/* wait some time, then remove data */
-		*(vu_long *) (SM501_MMIO_BASE +
-			      SM501_PANEL_DISPLAY_CONTROL) &= ~SM501_PDC_DATA;
-		udelay (1000);
-		/* and remove VDD last */
-		*(vu_long *) (SM501_MMIO_BASE +
-			      SM501_PANEL_DISPLAY_CONTROL) &=
-			~SM501_PDC_VDDEN;
-		return 0;
-	} else if (strncmp (argv[1], "bl", 2) == 0) {
-		/* turn on/off backlight only */
-		if (strncmp (argv[2], "on", 2) == 0) {
-			*(vu_long *) (SM501_MMIO_BASE +
-				      SM501_PANEL_DISPLAY_CONTROL) |=
-				SM501_PDC_BIAS;
-			udelay (1000);
-			*(vu_long *) (SM501_MMIO_BASE +
-				      SM501_PANEL_DISPLAY_CONTROL) |=
-				SM501_PDC_FPEN;
-			return 0;
-		} else if (strncmp (argv[2], "off", 3) == 0) {
-			*(vu_long *) (SM501_MMIO_BASE +
-				      SM501_PANEL_DISPLAY_CONTROL) &=
-				~SM501_PDC_FPEN;
-			udelay (1000);
-			*(vu_long *) (SM501_MMIO_BASE +
-				      SM501_PANEL_DISPLAY_CONTROL) &=
-				~SM501_PDC_BIAS;
-			return 0;
-		}
-	}
-#ifdef CONFIG_BC3450_CRT
-	else if (strncmp (argv[1], "crt", 3) == 0) {
-		/* enables/disables the crt output (debug only) */
-		if (strncmp (argv[2], "on", 2) == 0) {
-			*(vu_long *) (SM501_MMIO_BASE +
-				      SM501_CRT_DISPLAY_CONTROL) |=
-				(SM501_CDC_TE | SM501_CDC_E);
-			*(vu_long *) (SM501_MMIO_BASE +
-				      SM501_CRT_DISPLAY_CONTROL) &=
-				~SM501_CDC_SEL;
-			return 0;
-		} else if (strncmp (argv[2], "off", 3) == 0) {
-			*(vu_long *) (SM501_MMIO_BASE +
-				      SM501_CRT_DISPLAY_CONTROL) &=
-				~(SM501_CDC_TE | SM501_CDC_E);
-			*(vu_long *) (SM501_MMIO_BASE +
-				      SM501_CRT_DISPLAY_CONTROL) |=
-				SM501_CDC_SEL;
-			return 0;
-		}
-	}
-#endif /* CONFIG_BC3450_CRT */
-	printf ("Usage:%s\n", cmdtp->help);
-	return 1;
-}
-
-U_BOOT_CMD (fp, 3, 1, cmd_fp,
-	    "front panes access functions",
-	    "\n"
-	    "fp bl <on/off>\n"
-	    "     - turns the CCFL backlight of the display on/off\n"
-	    "fp <on/off>\n" "     - turns the whole display on/off"
-#ifdef CONFIG_BC3450_CRT
-	    "\n"
-	    "fp crt <on/off>\n"
-	    "     - enables/disables the crt output (debug only)"
-#endif /* CONFIG_BC3450_CRT */
-	);
-
-/*
- * temp - DS1620 thermometer
- */
-/* GERSYS BC3450 specific functions */
-static inline void bc_ds1620_set_clk (int clk)
-{
-	if (clk)
-		*(vu_long *) (SM501_MMIO_BASE + SM501_GPIO_DATA_LOW) |=
-			DS1620_CLK;
-	else
-		*(vu_long *) (SM501_MMIO_BASE + SM501_GPIO_DATA_LOW) &=
-			~DS1620_CLK;
-}
-
-static inline void bc_ds1620_set_data (int dat)
-{
-	if (dat)
-		*(vu_long *) (SM501_MMIO_BASE + SM501_GPIO_DATA_LOW) |=
-			DS1620_DQ;
-	else
-		*(vu_long *) (SM501_MMIO_BASE + SM501_GPIO_DATA_LOW) &=
-			~DS1620_DQ;
-}
-
-static inline int bc_ds1620_get_data (void)
-{
-	vu_long rc;
-
-	rc = *(vu_long *) (SM501_MMIO_BASE + SM501_GPIO_DATA_LOW);
-	rc &= DS1620_DQ;
-	if (rc != 0)
-		rc = 1;
-	return (int) rc;
-}
-
-static inline void bc_ds1620_set_data_dir (int dir)
-{
-	if (dir)		/* in */
-		*(vu_long *) (SM501_MMIO_BASE + SM501_GPIO_DATA_DIR_LOW) &= ~DS1620_DQ;
-	else			/* out */
-		*(vu_long *) (SM501_MMIO_BASE + SM501_GPIO_DATA_DIR_LOW) |= DS1620_DQ;
-}
-
-static inline void bc_ds1620_set_reset (int res)
-{
-	if (res)
-		*(vu_long *) (SM501_MMIO_BASE + SM501_GPIO_DATA_LOW) |= DS1620_RES;
-	else
-		*(vu_long *) (SM501_MMIO_BASE + SM501_GPIO_DATA_LOW) &= ~DS1620_RES;
-}
-
-/* hardware independent functions */
-static void ds1620_send_bits (int nr, int value)
-{
-	int i;
-
-	for (i = 0; i < nr; i++) {
-		bc_ds1620_set_data (value & 1);
-		bc_ds1620_set_clk (0);
-		udelay (1);
-		bc_ds1620_set_clk (1);
-		udelay (1);
-
-		value >>= 1;
-	}
-}
-
-static unsigned int ds1620_recv_bits (int nr)
-{
-	unsigned int value = 0, mask = 1;
-	int i;
-
-	bc_ds1620_set_data (0);
-
-	for (i = 0; i < nr; i++) {
-		bc_ds1620_set_clk (0);
-		udelay (1);
-
-		if (bc_ds1620_get_data ())
-			value |= mask;
-
-		mask <<= 1;
-
-		bc_ds1620_set_clk (1);
-		udelay (1);
-	}
-
-	return value;
-}
-
-static void ds1620_out (int cmd, int bits, int value)
-{
-	bc_ds1620_set_clk (1);
-	bc_ds1620_set_data_dir (0);
-
-	bc_ds1620_set_reset (0);
-	udelay (1);
-	bc_ds1620_set_reset (1);
-
-	udelay (1);
-
-	ds1620_send_bits (8, cmd);
-	if (bits)
-		ds1620_send_bits (bits, value);
-
-	udelay (1);
-
-	/* go stand alone */
-	bc_ds1620_set_data_dir (1);
-	bc_ds1620_set_reset (0);
-	bc_ds1620_set_clk (0);
-
-	udelay (10000);
-}
-
-static unsigned int ds1620_in (int cmd, int bits)
-{
-	unsigned int value;
-
-	bc_ds1620_set_clk (1);
-	bc_ds1620_set_data_dir (0);
-
-	bc_ds1620_set_reset (0);
-	udelay (1);
-	bc_ds1620_set_reset (1);
-
-	udelay (1);
-
-	ds1620_send_bits (8, cmd);
-
-	bc_ds1620_set_data_dir (1);
-	value = ds1620_recv_bits (bits);
-
-	/* go stand alone */
-	bc_ds1620_set_data_dir (1);
-	bc_ds1620_set_reset (0);
-	bc_ds1620_set_clk (0);
-
-	return value;
-}
-
-static int cvt_9_to_int (unsigned int val)
-{
-	if (val & 0x100)
-		val |= 0xfffffe00;
-
-	return val;
-}
-
-/* set thermostate thresholds */
-static void ds1620_write_state (struct therm *therm)
-{
-	ds1620_out (THERM_WRITE_TL, 9, therm->lo);
-	ds1620_out (THERM_WRITE_TH, 9, therm->hi);
-	ds1620_out (THERM_START_CONVERT, 0, 0);
-}
-
-static int cmd_temp (cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[])
-{
-	int i;
-	struct therm therm;
-
-	sm501_gpio_init ();
-
-	/* print temperature */
-	if (argc == 1) {
-		i = cvt_9_to_int (ds1620_in (THERM_READ_TEMP, 9));
-		printf ("%d.%d C\n", i >> 1, i & 1 ? 5 : 0);
-		return 0;
-	}
-
-	/* set to default operation */
-	if (strncmp (argv[1], "set", 3) == 0) {
-		if (strncmp (argv[2], "default", 3) == 0) {
-			therm.hi = +88;
-			therm.lo = -20;
-			therm.hi <<= 1;
-			therm.lo <<= 1;
-			ds1620_write_state (&therm);
-			ds1620_out (THERM_WRITE_CONFIG, 8, CONFIG_SYS_STANDALONE);
-			return 0;
-		}
-	}
-
-	printf ("Usage:%s\n", cmdtp->help);
-	return 1;
-}
-
-U_BOOT_CMD (temp, 3, 1, cmd_temp,
-	    "print current temperature",
-	    "\n" "temp\n" "     - print current temperature");
-
-#ifdef CONFIG_BC3450_CAN
-/*
- * Initialise CAN interface
- *
- * return 1 on CAN initialization failure
- * return 0 if no failure
- */
-int can_init (void)
-{
-	static int init_done = 0;
-	int i;
-	struct mpc5xxx_mscan *can1 =
-		(struct mpc5xxx_mscan *) (CONFIG_SYS_MBAR + 0x0900);
-	struct mpc5xxx_mscan *can2 =
-		(struct mpc5xxx_mscan *) (CONFIG_SYS_MBAR + 0x0980);
-
-	/* GPIO configuration of the CAN pins is done in BC3450.h */
-
-	if (!init_done) {
-		/* init CAN 1 */
-		can1->canctl1 |= 0x80;	/* CAN enable */
-		udelay (100);
-
-		i = 0;
-		can1->canctl0 |= 0x02;	/* sleep mode */
-		/* wait until sleep mode reached */
-		while (!(can1->canctl1 & 0x02)) {
-			udelay (10);
-			i++;
-			if (i == 10) {
-				printf ("%s: CAN1 initialize error, "
-					"can not enter sleep mode!\n",
-					__FUNCTION__);
-				return 1;
-			}
-		}
-		i = 0;
-		can1->canctl0 = 0x01;	/* enter init mode */
-		/* wait until init mode reached */
-		while (!(can1->canctl1 & 0x01)) {
-			udelay (10);
-			i++;
-			if (i == 10) {
-				printf ("%s: CAN1 initialize error, "
-					"can not enter init mode!\n",
-					__FUNCTION__);
-				return 1;
-			}
-		}
-		can1->canctl1 = 0x80;
-		can1->canctl1 |= 0x40;
-		can1->canbtr0 = 0x0F;
-		can1->canbtr1 = 0x7F;
-		can1->canidac &= ~(0x30);
-		can1->canidar1 = 0x00;
-		can1->canidar3 = 0x00;
-		can1->canidar5 = 0x00;
-		can1->canidar7 = 0x00;
-		can1->canidmr0 = 0xFF;
-		can1->canidmr1 = 0xFF;
-		can1->canidmr2 = 0xFF;
-		can1->canidmr3 = 0xFF;
-		can1->canidmr4 = 0xFF;
-		can1->canidmr5 = 0xFF;
-		can1->canidmr6 = 0xFF;
-		can1->canidmr7 = 0xFF;
-
-		i = 0;
-		can1->canctl0 &= ~(0x01);	/* leave init mode */
-		can1->canctl0 &= ~(0x02);
-		/* wait until init and sleep mode left */
-		while ((can1->canctl1 & 0x01) || (can1->canctl1 & 0x02)) {
-			udelay (10);
-			i++;
-			if (i == 10) {
-				printf ("%s: CAN1 initialize error, "
-					"can not leave init/sleep mode!\n",
-					__FUNCTION__);
-				return 1;
-			}
-		}
-
-		/* init CAN 2 */
-		can2->canctl1 |= 0x80;	/* CAN enable */
-		udelay (100);
-
-		i = 0;
-		can2->canctl0 |= 0x02;	/* sleep mode */
-		/* wait until sleep mode reached */
-		while (!(can2->canctl1 & 0x02)) {
-			udelay (10);
-			i++;
-			if (i == 10) {
-				printf ("%s: CAN2 initialize error, "
-					"can not enter sleep mode!\n",
-					__FUNCTION__);
-				return 1;
-			}
-		}
-		i = 0;
-		can2->canctl0 = 0x01;	/* enter init mode */
-		/* wait until init mode reached */
-		while (!(can2->canctl1 & 0x01)) {
-			udelay (10);
-			i++;
-			if (i == 10) {
-				printf ("%s: CAN2 initialize error, "
-					"can not enter init mode!\n",
-					__FUNCTION__);
-				return 1;
-			}
-		}
-		can2->canctl1 = 0x80;
-		can2->canctl1 |= 0x40;
-		can2->canbtr0 = 0x0F;
-		can2->canbtr1 = 0x7F;
-		can2->canidac &= ~(0x30);
-		can2->canidar1 = 0x00;
-		can2->canidar3 = 0x00;
-		can2->canidar5 = 0x00;
-		can2->canidar7 = 0x00;
-		can2->canidmr0 = 0xFF;
-		can2->canidmr1 = 0xFF;
-		can2->canidmr2 = 0xFF;
-		can2->canidmr3 = 0xFF;
-		can2->canidmr4 = 0xFF;
-		can2->canidmr5 = 0xFF;
-		can2->canidmr6 = 0xFF;
-		can2->canidmr7 = 0xFF;
-		can2->canctl0 &= ~(0x01);	/* leave init mode */
-		can2->canctl0 &= ~(0x02);
-
-		i = 0;
-		/* wait until init mode left */
-		while ((can2->canctl1 & 0x01) || (can2->canctl1 & 0x02)) {
-			udelay (10);
-			i++;
-			if (i == 10) {
-				printf ("%s: CAN2 initialize error, "
-					"can not leave init/sleep mode!\n",
-					__FUNCTION__);
-				return 1;
-			}
-		}
-		init_done = 1;
-	}
-	return 0;
-}
-
-/*
- * Do CAN test
- * by sending message between CAN1 and CAN2
- *
- * return 1 on CAN failure
- * return 0 if no failure
- */
-int do_can (char * const argv[])
-{
-	int i;
-	struct mpc5xxx_mscan *can1 =
-		(struct mpc5xxx_mscan *) (CONFIG_SYS_MBAR + 0x0900);
-	struct mpc5xxx_mscan *can2 =
-		(struct mpc5xxx_mscan *) (CONFIG_SYS_MBAR + 0x0980);
-
-	/* send a message on CAN1 */
-	can1->cantbsel = 0x01;
-	can1->cantxfg.idr[0] = 0x55;
-	can1->cantxfg.idr[1] = 0x00;
-	can1->cantxfg.idr[1] &= ~0x8;
-	can1->cantxfg.idr[1] &= ~0x10;
-	can1->cantxfg.dsr[0] = 0xCC;
-	can1->cantxfg.dlr = 1;
-	can1->cantxfg.tbpr = 0;
-	can1->cantflg = 0x01;
-
-	i = 0;
-	while ((can1->cantflg & 0x01) == 0) {
-		i++;
-		if (i == 10) {
-			printf ("%s: CAN1 send timeout, "
-				"can not send message!\n", __FUNCTION__);
-			return 1;
-		}
-		udelay (1000);
-	}
-	udelay (1000);
-
-	i = 0;
-	while (!(can2->canrflg & 0x01)) {
-		i++;
-		if (i == 10) {
-			printf ("%s: CAN2 receive timeout, "
-				"no message received!\n", __FUNCTION__);
-			return 1;
-		}
-		udelay (1000);
-	}
-
-	if (can2->canrxfg.dsr[0] != 0xCC) {
-		printf ("%s: CAN2 receive error, "
-			"data mismatch!\n", __FUNCTION__);
-		return 1;
-	}
-
-	/* send a message on CAN2 */
-	can2->cantbsel = 0x01;
-	can2->cantxfg.idr[0] = 0x55;
-	can2->cantxfg.idr[1] = 0x00;
-	can2->cantxfg.idr[1] &= ~0x8;
-	can2->cantxfg.idr[1] &= ~0x10;
-	can2->cantxfg.dsr[0] = 0xCC;
-	can2->cantxfg.dlr = 1;
-	can2->cantxfg.tbpr = 0;
-	can2->cantflg = 0x01;
-
-	i = 0;
-	while ((can2->cantflg & 0x01) == 0) {
-		i++;
-		if (i == 10) {
-			printf ("%s: CAN2 send error, "
-				"can not send message!\n", __FUNCTION__);
-			return 1;
-		}
-		udelay (1000);
-	}
-	udelay (1000);
-
-	i = 0;
-	while (!(can1->canrflg & 0x01)) {
-		i++;
-		if (i == 10) {
-			printf ("%s: CAN1 receive timeout, "
-				"no message received!\n", __FUNCTION__);
-			return 1;
-		}
-		udelay (1000);
-	}
-
-	if (can1->canrxfg.dsr[0] != 0xCC) {
-		printf ("%s: CAN1 receive error 0x%02x\n",
-			__FUNCTION__, (can1->canrxfg.dsr[0]));
-		return 1;
-	}
-
-	return 0;
-}
-#endif /* CONFIG_BC3450_CAN */
-
-/*
- * test - BC3450 HW test routines
- */
-int cmd_test (cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[])
-{
-#ifdef CONFIG_BC3450_CAN
-	int rcode;
-
-	can_init ();
-#endif /* CONFIG_BC3450_CAN */
-
-	sm501_gpio_init ();
-
-	if (argc != 2) {
-		printf ("Usage:%s\n", cmdtp->help);
-		return 1;
-	}
-
-	if (strncmp (argv[1], "unit-off", 8) == 0) {
-		printf ("waiting 2 seconds...\n");
-		udelay (2000000);
-		*(vu_long *) (SM501_MMIO_BASE + SM501_GPIO_DATA_HIGH) &=
-			~PWR_OFF;
-		return 0;
-	}
-#ifdef CONFIG_BC3450_CAN
-	else if (strncmp (argv[1], "can", 2) == 0) {
-		rcode = do_can (argv);
-		if (simple_strtoul (argv[2], NULL, 10) == 2) {
-			if (rcode == 0)
-				printf ("OK\n");
-			else
-				printf ("Error\n");
-		}
-		return rcode;
-	}
-#endif /* CONFIG_BC3450_CAN */
-
-	printf ("Usage:%s\n", cmdtp->help);
-	return 1;
-}
-
-U_BOOT_CMD (test, 2, 1, cmd_test, "unit test routines", "\n"
-#ifdef CONFIG_BC3450_CAN
-	"test can\n"
-	"     - connect CAN1 (X8) with CAN2 (X9) for this test\n"
-#endif /* CONFIG_BC3450_CAN */
-	"test unit-off\n"
-	"     - turns off the BC3450 unit\n"
-	"       WARNING: Unsaved environment variables will be lost!"
-);
-#endif
diff --git a/board/bc3450/mt48lc16m16a2-75.h b/board/bc3450/mt48lc16m16a2-75.h
deleted file mode 100644
index 3d99796..0000000
--- a/board/bc3450/mt48lc16m16a2-75.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/*
- * (C) Copyright 2004
- * Mark Jonas, Freescale Semiconductor, mark.jonas@motorola.com.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#define SDRAM_DDR	0		/* is SDR */
-
-/* Settings for XLB = 132 MHz */
-#define SDRAM_MODE	0x00CD0000
-/* #define SDRAM_MODE	0x008D0000 */ /* CAS latency 2 */
-#define SDRAM_CONTROL	0x504F0000
-#define SDRAM_CONFIG1	0xD2322800
-/* #define SDRAM_CONFIG1	0xD2222800 */ /* CAS latency 2 */
-/*#define SDRAM_CONFIG1	0xD7322800 */ /* SDRAM controller bug workaround */
-#define SDRAM_CONFIG2	0x8AD70000
-/*#define SDRAM_CONFIG2	0xDDD70000 */ /* SDRAM controller bug workaround */
diff --git a/configs/BC3450_defconfig b/configs/BC3450_defconfig
deleted file mode 100644
index ecb46e9..0000000
--- a/configs/BC3450_defconfig
+++ /dev/null
@@ -1,3 +0,0 @@
-CONFIG_PPC=y
-CONFIG_MPC5xxx=y
-CONFIG_TARGET_BC3450=y
diff --git a/doc/README.scrapyard b/doc/README.scrapyard
index cd8f4ae..481f4d8 100644
--- a/doc/README.scrapyard
+++ b/doc/README.scrapyard
@@ -12,13 +12,14 @@ The list should be sorted in reverse chronological order.
 
 Board            Arch        CPU            Commit      Removed     Last known maintainer/contact
 =================================================================================================
-hawkboard        arm         arm926ejs      -           -           Syed Mohammed Khasim <sm.khasim@gmail.com>:Sughosh Ganu <urwithsughosh@gmail.com>
-tnetv107x        arm         arm1176        -           -           Chan-Taek Park <c-park@ti.com>
-a320evb          arm         arm920t        -           -           Po-Yu Chuang <ratbert@faraday-tech.com>
-cm4008           arm         arm920t        -           -           Greg Ungerer <greg.ungerer@opengear.com>
-cm41xx           arm         arm920t        -           -
-dkb              arm         arm926ejs      -           -           Lei Wen <leiwen@marvell.com>
-jadecpu          arm         arm926ejs      -           -           Matthias Weisser <weisserm@arcor.de>
+BC3450           powerpc     mpc5xxx        -           -
+hawkboard        arm         arm926ejs      cb957cda    2015-02-24  Syed Mohammed Khasim <sm.khasim@gmail.com>:Sughosh Ganu <urwithsughosh@gmail.com>
+tnetv107x        arm         arm1176        50b82c4b    2015-02-24  Chan-Taek Park <c-park@ti.com>
+a320evb          arm         arm920t        29fc6f24    2015-02-24  Po-Yu Chuang <ratbert@faraday-tech.com>
+cm4008           arm         arm920t        a2f39e83    2015-02-24  Greg Ungerer <greg.ungerer@opengear.com>
+cm41xx           arm         arm920t        a2f39e83    2015-02-24
+dkb              arm         arm926ejs      346cfba4    2015-02-24  Lei Wen <leiwen@marvell.com>
+jadecpu          arm         arm926ejs      41fbbbbc    2015-02-24  Matthias Weisser <weisserm@arcor.de>
 icecube_5200     powerpc     mpc5xxx        37b608a5    2015-01-23  Wolfgang Denk <wd@denx.de>
 Lite5200         powerpc     mpc5xxx        37b608a5    2015-01-23
 cpci5200         powerpc     mpc5xxx        37b608a5    2015-01-23  Reinhard Arlt <reinhard.arlt@esd-electronics.com>
diff --git a/include/configs/BC3450.h b/include/configs/BC3450.h
deleted file mode 100644
index 802e9cc..0000000
--- a/include/configs/BC3450.h
+++ /dev/null
@@ -1,541 +0,0 @@
-/*
- * -- Version 1.1 --
- *
- * (C) Copyright 2003-2005
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * (C) Copyright 2004-2005
- * Martin Krause, TQ-Systems GmbH, martin.krause@tqs.de
- *
- * (C) Copyright 2005
- * Stefan Strobl, GERSYS GmbH, stefan.strobl@gersys.de.
- *
- * History:
- *	1.1 - add define CONFIG_ZERO_BOOTDELAY_CHECK
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * High Level Configuration Options
- */
-#define CONFIG_MPC5200		1	/* This is a MPC5200 CPU	    */
-#define CONFIG_TQM5200		1	/* ... on a TQM5200 module	    */
-
-#define CONFIG_BC3450		1	/* ... on a BC3450 mainboard	    */
-#define CONFIG_BC3450_PS2	1	/*  + a PS/2 converter onboard	    */
-#define CONFIG_BC3450_IDE	1	/*  + IDE drives (Compact Flash)    */
-#define CONFIG_BC3450_USB	1	/*  + USB support		    */
-# define CONFIG_FAT		1	/*    + FAT support		    */
-# define CONFIG_EXT2		1	/*    + EXT2 support		    */
-#undef CONFIG_BC3450_BUZZER		/*  + Buzzer onboard		    */
-#undef CONFIG_BC3450_CAN		/*  + CAN transceiver		    */
-#undef CONFIG_BC3450_DS1340		/*  + a RTC DS1340 onboard	    */
-#undef CONFIG_BC3450_DS3231		/*  + a RTC DS3231 onboard	tbd */
-#undef CONFIG_BC3450_AC97		/*  + AC97 on PSC2,		tbd */
-#define CONFIG_BC3450_FP	1	/*  + enable FP O/P		    */
-#undef CONFIG_BC3450_CRT		/*  + enable CRT O/P (Debug only!)  */
-
-/*
- * Valid values for CONFIG_SYS_TEXT_BASE are:
- * 0xFC000000	boot low (standard configuration with room for
- *		max 64 MByte Flash ROM)
- * 0x00100000	boot from RAM (for testing only)
- */
-#ifndef CONFIG_SYS_TEXT_BASE
-#define CONFIG_SYS_TEXT_BASE	0xFC000000
-#endif
-
-#define CONFIG_SYS_MPC5XXX_CLKIN	33000000 /* ... running at 33.000000MHz	    */
-
-#define CONFIG_HIGH_BATS	1	/* High BATs supported		    */
-
-/*
- * Serial console configuration
- */
-#define CONFIG_PSC_CONSOLE	1	/* console is on PSC1		*/
-#define CONFIG_BAUDRATE		115200	/* ... at 115200 bps		*/
-#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
-
-/*
- * AT-PS/2 Multiplexer
- */
-#ifdef CONFIG_BC3450_PS2
-# define CONFIG_PS2KBD			/* AT-PS/2 Keyboard		*/
-# define CONFIG_PS2MULT			/* .. on PS/2 Multiplexer	*/
-# define CONFIG_PS2SERIAL	6		/* .. on PSC6		*/
-# define CONFIG_PS2MULT_DELAY	(CONFIG_SYS_HZ/2)	/* Initial delay	*/
-# define CONFIG_BOARD_EARLY_INIT_R
-#endif /* CONFIG_BC3450_PS2 */
-
-/*
- * PCI Mapping:
- * 0x40000000 - 0x4fffffff - PCI Memory
- * 0x50000000 - 0x50ffffff - PCI IO Space
- */
-# define CONFIG_PCI		1
-# define CONFIG_PCI_PNP		1
-/* #define CONFIG_PCI_SCAN_SHOW 1 */
-#define CONFIG_PCIAUTO_SKIP_HOST_BRIDGE	1
-
-#define CONFIG_PCI_MEM_BUS	0x40000000
-#define CONFIG_PCI_MEM_PHYS	CONFIG_PCI_MEM_BUS
-#define CONFIG_PCI_MEM_SIZE	0x10000000
-
-#define CONFIG_PCI_IO_BUS	0x50000000
-#define CONFIG_PCI_IO_PHYS	CONFIG_PCI_IO_BUS
-#define CONFIG_PCI_IO_SIZE	0x01000000
-
-/*#define CONFIG_EEPRO100	XXX - FIXME: conflicts when CONFIG_MII is enabled */
-#define CONFIG_SYS_RX_ETH_BUFFER	8	/* use 8 rx buffer on eepro100	*/
-#define CONFIG_NS8382X		1
-
-/*
- * Video console
- */
-# define CONFIG_VIDEO
-# define CONFIG_VIDEO_SM501
-# define CONFIG_VIDEO_SM501_32BPP
-# define CONFIG_CFB_CONSOLE
-# define CONFIG_VIDEO_LOGO
-# define CONFIG_VGA_AS_SINGLE_DEVICE
-# define CONFIG_CONSOLE_EXTRA_INFO	/* display Board/Device-Infos */
-# define CONFIG_VIDEO_SW_CURSOR
-# define CONFIG_SPLASH_SCREEN
-# define CONFIG_SYS_CONSOLE_IS_IN_ENV
-
-/*
- * Partitions
- */
-#define CONFIG_MAC_PARTITION
-#define CONFIG_DOS_PARTITION
-#define CONFIG_ISO_PARTITION
-
-/*
- * USB
- */
-#ifdef CONFIG_BC3450_USB
-# define CONFIG_USB_OHCI
-# define CONFIG_USB_STORAGE
-#endif /* CONFIG_BC3450_USB */
-
-/*
- * POST support
- */
-#define CONFIG_POST		(CONFIG_SYS_POST_MEMORY   | \
-				 CONFIG_SYS_POST_CPU	   | \
-				 CONFIG_SYS_POST_I2C)
-
-#ifdef CONFIG_POST
-/* preserve space for the post_word at end of on-chip SRAM */
-# define MPC5XXX_SRAM_POST_SIZE MPC5XXX_SRAM_SIZE-4
-#endif /* CONFIG_POST */
-
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_ASKENV
-#define CONFIG_CMD_DATE
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_ECHO
-#define CONFIG_CMD_EEPROM
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_JFFS2
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_NFS
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_REGINFO
-#define CONFIG_CMD_SNTP
-#define CONFIG_CMD_BSP
-
-#ifdef CONFIG_VIDEO
-    #define CONFIG_CMD_BMP
-#endif
-
-#ifdef CONFIG_BC3450_IDE
-    #define CONFIG_CMD_IDE
-#endif
-
-#if defined(CONFIG_BC3450_IDE) || defined(CONFIG_BC3450_USB)
-    #ifdef CONFIG_FAT
-	#define CONFIG_CMD_FAT
-    #endif
-
-    #ifdef CONFIG_EXT2
-	#define CONFIG_CMD_EXT2
-    #endif
-#endif
-
-#ifdef CONFIG_BC3450_USB
-    #define CONFIG_CMD_USB
-#endif
-
-#ifdef CONFIG_PCI
-    #define CONFIG_CMD_PCI
-#endif
-
-#ifdef CONFIG_POST
-    #define CONFIG_CMD_DIAG
-#endif
-
-
-#define CONFIG_TIMESTAMP		/* display image timestamps */
-
-#if (CONFIG_SYS_TEXT_BASE == 0xFC000000)		/* Boot low */
-#   define CONFIG_SYS_LOWBOOT		1
-#endif
-
-/*
- * Autobooting
- */
-#define CONFIG_BOOTDELAY	5	/* autoboot after 5 seconds */
-#define CONFIG_ZERO_BOOTDELAY_CHECK	/* check for keypress on bootdelay==0 */
-
-#define CONFIG_PREBOOT	"echo;" \
-	"echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;" \
-	"echo;"
-
-#undef	CONFIG_BOOTARGS
-
-#define CONFIG_EXTRA_ENV_SETTINGS					\
-	"netdev=eth0\0"							\
-	"ipaddr=192.168.1.10\0"						\
-	"serverip=192.168.1.3\0"					\
-	"netmask=255.255.255.0\0"					\
-	"hostname=bc3450\0"						\
-	"rootpath=/opt/eldk/ppc_6xx\0"					\
-	"kernel_addr=fc0a0000\0"					\
-	"ramdisk_addr=fc1c0000\0"					\
-	"ramargs=setenv bootargs root=/dev/ram rw\0"			\
-	"nfsargs=setenv bootargs root=/dev/nfs rw "			\
-		"nfsroot=$(serverip):$(rootpath)\0"			\
-	"ideargs=setenv bootargs root=/dev/hda2 ro\0"			\
-	"addip=setenv bootargs $(bootargs) "				\
-		"ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask)"	\
-		":$(hostname):$(netdev):off panic=1\0"			\
-	"addcons=setenv bootargs $(bootargs) "				\
-		"console=ttyS0,$(baudrate) console=tty0\0"		\
-	"flash_self=run ramargs addip addcons;"				\
-		"bootm $(kernel_addr) $(ramdisk_addr)\0"		\
-	"flash_nfs=run nfsargs addip addcons; bootm $(kernel_addr)\0"	\
-	"net_nfs=tftp 200000 $(bootfile); "				\
-		"run nfsargs addip addcons; bootm\0"			\
-	"ide_nfs=run nfsargs addip addcons; "				\
-		"disk 200000 0:1; bootm\0"				\
-	"ide_ide=run ideargs addip addcons; "				\
-		"disk 200000 0:1; bootm\0"				\
-	"usb_self=run usbload; run ramargs addip addcons; "		\
-		"bootm 200000 400000\0"					\
-	"usbload=usb reset; usb scan; usbboot 200000 0:1; "		\
-		"usbboot 400000 0:2\0"					\
-	"bootfile=uImage\0"						\
-	"load=tftp 200000 $(u-boot)\0"					\
-	"u-boot=u-boot.bin\0"						\
-	"update=protect off FC000000 FC05FFFF;"				\
-		"erase FC000000 FC05FFFF;"				\
-		"cp.b 200000 FC000000 $(filesize);"			\
-		"protect on FC000000 FC05FFFF\0"			\
-	""
-
-#define CONFIG_BOOTCOMMAND	"run flash_self"
-
-/*
- * IPB Bus clocking configuration.
- */
-#define CONFIG_SYS_IPBCLK_EQUALS_XLBCLK		/* define for 133MHz speed */
-
-/*
- * PCI Bus clocking configuration
- *
- * Actually a PCI Clock of 66 MHz is only set (in cpu_init.c) if
- * CONFIG_SYS_IPBCLK_EQUALS_XLBCLK is defined. This is because a PCI Clock
- *  of 66 MHz yet hasn't been tested with a IPB Bus Clock of 66 MHz.
- */
-#if defined(CONFIG_SYS_IPBCLK_EQUALS_XLBCLK)
-# define CONFIG_SYS_PCICLK_EQUALS_IPBCLK_DIV2	/* define for 66MHz speed */
-#endif
-
-/*
- * I2C configuration
- */
-#define CONFIG_HARD_I2C		1	/* I2C with hardware support */
-#define CONFIG_SYS_I2C_MODULE		2	/* Select I2C module #2 */
-
-/*
- * I2C clock frequency
- *
- * Please notice, that the resulting clock frequency could differ from the
- * configured value. This is because the I2C clock is derived from system
- * clock over a frequency divider with only a few divider values. U-boot
- * calculates the best approximation for CONFIG_SYS_I2C_SPEED. However the calculated
- * approximation allways lies below the configured value, never above.
- */
-#define CONFIG_SYS_I2C_SPEED		100000 /* 100 kHz */
-#define CONFIG_SYS_I2C_SLAVE		0x7F
-
-/*
- * EEPROM configuration for I²C EEPROM M24C32
- * M24C64 should work also. For other EEPROMs config should be verified.
- *
- * The TQM5200 module may hold an EEPROM at address 0x50.
- */
-#define CONFIG_SYS_I2C_EEPROM_ADDR		0x50	/* 1010000x (TQM) */
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN		2
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS	5	/* =32 Bytes per write */
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	70
-
-/*
- * RTC configuration
- */
-#if defined (CONFIG_BC3450_DS1340) && !defined (CONFIG_BC3450_DS3231)
-# define CONFIG_RTC_M41T11	1
-# define CONFIG_SYS_I2C_RTC_ADDR	0x68
-#else
-# define CONFIG_RTC_MPC5200	1	/* use MPC5200 internal RTC */
-# define CONFIG_BOARD_EARLY_INIT_R
-#endif
-
-/*
- * Flash configuration
- */
-#define CONFIG_SYS_FLASH_BASE		CONFIG_SYS_TEXT_BASE /* 0xFC000000 */
-
-/* use CFI flash driver if no module variant is spezified */
-#define CONFIG_SYS_FLASH_CFI		1	/* Flash is CFI conformant */
-#define CONFIG_FLASH_CFI_DRIVER	1	/* Use the common driver */
-#define CONFIG_SYS_FLASH_BANKS_LIST	{ CONFIG_SYS_BOOTCS_START }
-#define CONFIG_SYS_FLASH_EMPTY_INFO
-#define CONFIG_SYS_FLASH_SIZE		0x04000000 /* 64 MByte */
-#define CONFIG_SYS_MAX_FLASH_SECT	512	/* max num of sects on one chip */
-#undef CONFIG_SYS_FLASH_USE_BUFFER_WRITE	/* not supported yet for AMD */
-
-#if !defined(CONFIG_SYS_LOWBOOT)
-#define CONFIG_ENV_ADDR		(CONFIG_SYS_FLASH_BASE + 0x00760000 + 0x00800000)
-#else	/* CONFIG_SYS_LOWBOOT */
-#define CONFIG_ENV_ADDR		(CONFIG_SYS_FLASH_BASE + 0x00060000)
-#endif	/* CONFIG_SYS_LOWBOOT */
-#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max num of flash banks
-					   (= chip selects) */
-#define CONFIG_SYS_FLASH_ERASE_TOUT	240000	/* Flash Erase Timeout (in ms)	*/
-#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (in ms)	*/
-
-/* Dynamic MTD partition support */
-#define CONFIG_CMD_MTDPARTS
-#define CONFIG_MTD_DEVICE		/* needed for mtdparts commands */
-#define CONFIG_FLASH_CFI_MTD
-#define MTDIDS_DEFAULT		"nor0=TQM5200-0"
-#define MTDPARTS_DEFAULT	"mtdparts=TQM5200-0:640k(firmware),"	\
-						"1408k(kernel),"	\
-						"2m(initrd),"		\
-						"4m(small-fs),"		\
-						"16m(big-fs),"		\
-						"8m(misc)"
-
-/*
- * Environment settings
- */
-#define CONFIG_ENV_IS_IN_FLASH	1
-#define CONFIG_ENV_SIZE		0x10000
-#define CONFIG_ENV_SECT_SIZE	0x20000
-#define CONFIG_ENV_ADDR_REDUND	(CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE)
-#define CONFIG_ENV_SIZE_REDUND	(CONFIG_ENV_SIZE)
-
-/*
- * Memory map
- */
-#define CONFIG_SYS_MBAR		0xF0000000
-#define CONFIG_SYS_SDRAM_BASE		0x00000000
-#define CONFIG_SYS_DEFAULT_MBAR	0x80000000
-
-/* Use ON-Chip SRAM until RAM will be available */
-#define CONFIG_SYS_INIT_RAM_ADDR	MPC5XXX_SRAM
-#ifdef CONFIG_POST
-/* preserve space for the post_word at end of on-chip SRAM */
-# define CONFIG_SYS_INIT_RAM_SIZE	MPC5XXX_SRAM_POST_SIZE
-#else
-# define CONFIG_SYS_INIT_RAM_SIZE	MPC5XXX_SRAM_SIZE
-#endif /*CONFIG_POST*/
-
-#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
-
-#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_TEXT_BASE
-#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
-#   define CONFIG_SYS_RAMBOOT		1
-#endif
-
-#define CONFIG_SYS_MONITOR_LEN		(384 << 10) /* Reserve 384 kB for Monitor   */
-#define CONFIG_SYS_MALLOC_LEN		(128 << 10) /* Reserve 128 kB for malloc()  */
-#define CONFIG_SYS_BOOTMAPSZ		(8 << 20)   /* Initial Memory map for Linux */
-
-/*
- * Ethernet configuration
- *
- * Define CONFIG_MPC5xxx_MII10 to force FEC at 10MBIT
- */
-#define CONFIG_MPC5xxx_FEC	1
-#define CONFIG_MPC5xxx_FEC_MII100
-#undef CONFIG_MPC5xxx_MII10
-#define CONFIG_PHY_ADDR		0x00
-
-/*
- * GPIO configuration on BC3450
- *
- *  PSC1:   UART1 (Service-UART)	 [0x xxxxxxx4]
- *  PSC2:   UART2			 [0x xxxxxx4x]
- *    or:   AC/97 if CONFIG_BC3450_AC97	 [0x xxxxxx2x]
- *  PSC3:   USB2			 [0x xxxxx1xx]
- *  USB:    UART4(ext.)/UART5(int.)	 [0x xxxx2xxx]
- *	      (this has to match
- *	      CONFIG_USB_CONFIG which is
- *	      used by usb_ohci.c to set
- *	      the USB ports)
- *  Eth:    10/100Mbit Ethernet		 [0x xxx0xxxx]
- *	      (this is reset to '5'
- *	      in FEC driver: fec.c)
- *  PSC6:   UART6 (int. to PS/2 contr.)	 [0x xx5xxxxx]
- *  ATA/CS: ???				 [0x x1xxxxxx]
- *	    FIXME! UM Fig 2-10 suggests	 [0x x0xxxxxx]
- *  CS1:    Use Pin gpio_wkup_6 as second
- *	    SDRAM chip select (mem_cs1)
- *  Timer:  CAN2 / SPI
- *  I2C:    CAN1 / I²C2		  [0x bxxxxxxx]
- */
-#ifdef CONFIG_BC3450_AC97
-# define CONFIG_SYS_GPS_PORT_CONFIG	0xb1502124
-#else /* PSC2=UART2 */
-# define CONFIG_SYS_GPS_PORT_CONFIG	0xb1502144
-#endif
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP				/* undef to save memory	    */
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CBSIZE		1024		/* Console I/O Buffer Size  */
-#else
-#define CONFIG_SYS_CBSIZE		256		/* Console I/O Buffer Size  */
-#endif
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size  */
-#define CONFIG_SYS_MAXARGS		16		/* max no of command args   */
-#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Arg. Buffer Size    */
-
-#define CONFIG_SYS_ALT_MEMTEST				/* Enable an alternative,   */
-						/*  more extensive mem test */
-
-#define CONFIG_SYS_MEMTEST_START	0x00100000	/* memtest works on	    */
-#define CONFIG_SYS_MEMTEST_END		0x00f00000	/* 1 ... 15 MB in DRAM	    */
-
-#define CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address	    */
-
-#define CONFIG_SYS_CACHELINE_SIZE	32	/* For MPC5xxx CPUs		    */
-#if defined(CONFIG_CMD_KGDB)
-#  define CONFIG_SYS_CACHELINE_SHIFT	5	/* log base 2 of the above value    */
-#endif
-
-/*
- * Enable loopw command.
- */
-#define CONFIG_LOOPW
-
-/*
- * Various low-level settings
- */
-#define CONFIG_SYS_HID0_INIT		HID0_ICE | HID0_ICFI
-#define CONFIG_SYS_HID0_FINAL		HID0_ICE
-
-#define CONFIG_SYS_BOOTCS_START	CONFIG_SYS_FLASH_BASE
-#define CONFIG_SYS_BOOTCS_SIZE		CONFIG_SYS_FLASH_SIZE
-#ifdef CONFIG_SYS_PCICLK_EQUALS_IPBCLK_DIV2
-# define CONFIG_SYS_BOOTCS_CFG		0x0008DF30	/* for pci_clk	= 66 MHz */
-#else
-# define CONFIG_SYS_BOOTCS_CFG		0x0004DF30	/* for pci_clk = 33 MHz	 */
-#endif
-#define CONFIG_SYS_CS0_START		CONFIG_SYS_FLASH_BASE
-#define CONFIG_SYS_CS0_SIZE		CONFIG_SYS_FLASH_SIZE
-
-/* automatic configuration of chip selects */
-#ifdef CONFIG_TQM5200
-# define CONFIG_LAST_STAGE_INIT
-#endif /* CONFIG_TQM5200 */
-
-/*
- * SRAM - Do not map below 2 GB in address space, because this area is used
- * for SDRAM autosizing.
- */
-#ifdef CONFIG_TQM5200
-# define CONFIG_SYS_CS2_START		0xE5000000
-# define CONFIG_SYS_CS2_SIZE		0x100000	/* 1 MByte */
-# define CONFIG_SYS_CS2_CFG		0x0004D930
-#endif /* CONFIG_TQM5200 */
-
-/*
- * Grafic controller - Do not map below 2 GB in address space, because this
- * area is used for SDRAM autosizing.
- */
-#ifdef CONFIG_TQM5200
-# define SM501_FB_BASE		0xE0000000
-# define CONFIG_SYS_CS1_START		(SM501_FB_BASE)
-# define CONFIG_SYS_CS1_SIZE		0x4000000	/* 64 MByte */
-# define CONFIG_SYS_CS1_CFG		0x8F48FF70
-# define SM501_MMIO_BASE	CONFIG_SYS_CS1_START + 0x03E00000
-#endif /* CONFIG_TQM5200 */
-
-#define CONFIG_SYS_CS_BURST		0x00000000
-#define CONFIG_SYS_CS_DEADCYCLE	0x33333311	/* 1 dead cycle for	*/
-						/*  flash and SM501	*/
-
-#define CONFIG_SYS_RESET_ADDRESS	0xff000000
-
-/*
- * USB stuff
- */
-#define CONFIG_USB_CLOCK	0x0001BBBB
-#define CONFIG_USB_CONFIG	0x00002000	/* we're using Port 2	*/
-
-/*
- * IDE/ATA stuff Supports IDE harddisk
- */
-#undef	CONFIG_IDE_8xx_PCCARD		/* Use IDE with PC Card Adapter */
-
-#undef	CONFIG_IDE_8xx_DIRECT		/* Direct IDE	  not supported */
-#undef	CONFIG_IDE_LED			/* LED for ide	  not supported */
-
-#define CONFIG_IDE_RESET		/* reset for ide      supported */
-#define CONFIG_IDE_PREINIT
-
-#define CONFIG_SYS_IDE_MAXBUS		1	/* max. 1 IDE bus		*/
-#define CONFIG_SYS_IDE_MAXDEVICE	2	/* max. 2 drives per IDE bus	*/
-
-#define CONFIG_SYS_ATA_IDE0_OFFSET	0x0000
-
-#define CONFIG_SYS_ATA_BASE_ADDR	MPC5XXX_ATA
-
-/* Offset for data I/O */
-#define CONFIG_SYS_ATA_DATA_OFFSET	(0x0060)
-
-/* Offset for normal register accesses */
-#define CONFIG_SYS_ATA_REG_OFFSET	(CONFIG_SYS_ATA_DATA_OFFSET)
-
-/* Offset for alternate registers */
-#define CONFIG_SYS_ATA_ALT_OFFSET	(0x005C)
-
-/* Interval between registers */
-#define CONFIG_SYS_ATA_STRIDE		4
-
-#endif /* __CONFIG_H */