Add MCF5282 support (without preloader)

relocate ichache_State to ram
u-boot can run from internal flash
Add EB+MCF-EV123 board support.
Add m68k Boards to MAKEALL
Patch from Jens Scharsig, 08 Aug 2005

23 files changed, 2421 insertions, 103 deletions

diff --git a/CHANGELOG b/CHANGELOG
index cbc18d9..012fa3d 100644
--- a/CHANGELOG
+++ b/CHANGELOG
@@ -2,6 +2,13 @@
 Changes since U-Boot 1.1.4:
 ======================================================================
 
+* Add MCF5282 support (without preloader)
+  relocate ichache_State to ram
+  u-boot can run from internal flash
+  Add EB+MCF-EV123 board support.
+  Add m68k Boards to MAKEALL
+  Patch from Jens Scharsig, 08 Aug 2005
+
 * MPC5200: enable snooping of DMA transactions on XLB even if no PCI
   is configured; othrwise DMA accesses aren't cache coherent which
   causes for example USB to fail.
diff --git a/MAKEALL b/MAKEALL
index d388afa..d3bd032 100755
--- a/MAKEALL
+++ b/MAKEALL
@@ -273,6 +273,17 @@ LIST_nios2="PCI5441 PK1C20"
 
 LIST_microblaze="suzaku"
 
+#########################################################################
+## M68K Systems
+#########################################################################
+
+LIST_m68k="\
+	cobra5272 \
+	EB+MCF-EV123 EB+MCF-EV123_internal \
+	M5272C3 M5282EVB \
+	TASREG \
+"
+
 #-----------------------------------------------------------------------
 
 #----- for now, just run PPC by default -----
@@ -286,7 +297,7 @@ build_target() {
 	${MAKE} distclean >/dev/null
 	${MAKE} ${target}_config
 	${MAKE} ${JOBS} all 2>&1 >LOG/$target.MAKELOG | tee LOG/$target.ERR
-	${CROSS_COMPILE:-ppc_8xx-}size u-boot | tee -a LOG/$target.MAKELOG
+#	${CROSS_COMPILE:-ppc_8xx-}size u-boot | tee -a LOG/$target.MAKELOG
 }
 
 #-----------------------------------------------------------------------
@@ -300,6 +311,7 @@ do
 	microblaze| \
 	mips|mips_el| \
 	nios|nios2| \
+	m68k| \
 	x86|I486)
 			for target in `eval echo '$LIST_'${arg}`
 			do
diff --git a/Makefile b/Makefile
index 9b93463..7fd82e9 100644
--- a/Makefile
+++ b/Makefile
@@ -1313,6 +1313,20 @@ MPC8349EMDS_config:	unconfig
 	@./mkconfig $(@:_config=) ppc mpc83xx mpc8349emds
 
 #########################################################################
+# BuS
+#########################################################################
+
+EB+MCF-EV123_config :		unconfig
+	@ >include/config.h
+	@echo "TEXT_BASE = 0xFFE00000"|tee board/BuS/EB+MCF-EV123/textbase.mk
+	@./mkconfig EB+MCF-EV123 m68k mcf52x2 EB+MCF-EV123 BuS
+
+EB+MCF-EV123_internal_config :	unconfig
+	@ >include/config.h
+	@echo "TEXT_BASE = 0xF0000000"|tee board/BuS/EB+MCF-EV123/textbase.mk
+	@./mkconfig EB+MCF-EV123 m68k mcf52x2 EB+MCF-EV123 BuS
+
+#########################################################################
 ## MPC85xx Systems
 #########################################################################
 
diff --git a/board/BuS/EB+MCF-EV123/EB+MCF-EV123.c b/board/BuS/EB+MCF-EV123/EB+MCF-EV123.c
new file mode 100644
index 0000000..f18313d
--- /dev/null
+++ b/board/BuS/EB+MCF-EV123/EB+MCF-EV123.c
@@ -0,0 +1,162 @@
+/*
+ * (C) Copyright 2005
+ * BuS Elektronik GmbH & Co.KG <esw@bus-elektonik.de>
+ *
+ * (C) Copyright 2000-2003
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <command.h>
+#include "asm/m5282.h"
+#include "VCxK.h"
+
+int checkboard (void)
+{
+	puts ("Board: MCF-EV1 + MCF-EV23 (BuS Elektronik GmbH & Co. KG)\n");
+#if (TEXT_BASE ==  CFG_INT_FLASH_BASE)
+	puts ("       Boot from Internal FLASH\n");
+#endif
+
+	return 0;
+}
+
+long int initdram (int board_type)
+{
+	int size,i;
+
+	size = 0;
+	MCFSDRAMC_DCR =	MCFSDRAMC_DCR_RTIM_6
+			| MCFSDRAMC_DCR_RC((15 * CFG_CLK)>>4);
+	#ifdef CFG_SDRAM_BASE0
+
+		MCFSDRAMC_DACR0 =	MCFSDRAMC_DACR_BASE(CFG_SDRAM_BASE0)
+					| MCFSDRAMC_DACR_CASL(1)
+ 					| MCFSDRAMC_DACR_CBM(3)
+					| MCFSDRAMC_DACR_PS_16);
+
+		MCFSDRAMC_DMR0 =	MCFSDRAMC_DMR_BAM_16M
+					| MCFSDRAMC_DMR_V;
+
+		MCFSDRAMC_DACR0 |= 	MCFSDRAMC_DACR_IP;
+
+		*(unsigned short *)(CFG_SDRAM_BASE0) = 0xA5A5;
+		MCFSDRAMC_DACR0 |=	MCFSDRAMC_DACR_RE;
+		for (i=0; i < 2000; i++)
+			asm(" nop");
+		mbar_writeLong(MCFSDRAMC_DACR0, mbar_readLong(MCFSDRAMC_DACR0)
+								    | MCFSDRAMC_DACR_IMRS);
+		*(unsigned int *)(CFG_SDRAM_BASE0 + 0x220) = 0xA5A5;
+		size += CFG_SDRAM_SIZE * 1024 * 1024;
+	#endif
+	#ifdef CFG_SDRAM_BASE1
+		MCFSDRAMC_DACR1 =	MCFSDRAMC_DACR_BASE(CFG_SDRAM_BASE1)
+					| MCFSDRAMC_DACR_CASL(1)
+ 					| MCFSDRAMC_DACR_CBM(3)
+					| MCFSDRAMC_DACR_PS_16;
+
+		MCFSDRAMC_DMR1 = 	MCFSDRAMC_DMR_BAM_16M
+					| MCFSDRAMC_DMR_V;
+
+		MCFSDRAMC_DACR1 |=	MCFSDRAMC_DACR_IP;
+
+		*(unsigned short *)(CFG_SDRAM_BASE1) = 0xA5A5;
+		MCFSDRAMC_DACR1 |=	MCFSDRAMC_DACR_RE;
+		for (i=0; i < 2000; i++)
+			asm(" nop");
+		MCFSDRAMC_DACR1 |= 	MCFSDRAMC_DACR_IMRS;
+		*(unsigned int *)(CFG_SDRAM_BASE1 + 0x220) = 0xA5A5;
+		size += CFG_SDRAM_SIZE1 * 1024 * 1024;
+	#endif
+	return size;
+}
+
+
+#if defined(CFG_DRAM_TEST)
+int testdram (void)
+{
+	uint *pstart = (uint *) CFG_MEMTEST_START;
+	uint *pend = (uint *) CFG_MEMTEST_END;
+	uint *p;
+
+	printf("SDRAM test phase 1:\n");
+	for (p = pstart; p < pend; p++)
+		*p = 0xaaaaaaaa;
+
+	for (p = pstart; p < pend; p++) {
+		if (*p != 0xaaaaaaaa) {
+			printf ("SDRAM test fails at: %08x\n", (uint) p);
+			return 1;
+		}
+	}
+
+	printf("SDRAM test phase 2:\n");
+	for (p = pstart; p < pend; p++)
+		*p = 0x55555555;
+
+	for (p = pstart; p < pend; p++) {
+		if (*p != 0x55555555) {
+			printf ("SDRAM test fails at: %08x\n", (uint) p);
+			return 1;
+		}
+	}
+
+	printf("SDRAM test passed.\n");
+	return 0;
+}
+#endif
+
+int misc_init_r(void)
+{
+	init_vcxk();
+	return 1;
+}
+
+/*---------------------------------------------------------------------------*/
+
+int do_vcimage (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+	int rcode = 0;
+	ulong source;
+
+	switch (argc) {
+	case 2:
+		source = simple_strtoul(argv[1],NULL,16);
+		vcxk_loadimage(source);
+		rcode = 0;
+		break;
+	default:
+		printf ("Usage:\n%s\n", cmdtp->usage);
+		rcode = 1;
+		break;
+	}
+	return rcode;
+}
+
+/***************************************************/
+
+U_BOOT_CMD(
+	vcimage,	2,	0,	do_vcimage,
+	"vcimage - loads an image to Display\n",
+	"vcimage addr\n"
+);
+
+/* EOF EB+MCF-EV123c */
diff --git a/board/BuS/EB+MCF-EV123/Makefile b/board/BuS/EB+MCF-EV123/Makefile
new file mode 100644
index 0000000..d5dbc71
--- /dev/null
+++ b/board/BuS/EB+MCF-EV123/Makefile
@@ -0,0 +1,40 @@
+#
+# (C) Copyright 2000-2003
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= lib$(BOARD).a
+
+OBJS	= $(BOARD).o cfm_flash.o flash.o VCxK.o 
+
+$(LIB):	.depend $(OBJS)
+	$(AR) crv $@ $(OBJS)
+
+#########################################################################
+
+.depend:	Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
+		$(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+
+sinclude .depend
+
+#########################################################################
diff --git a/board/BuS/EB+MCF-EV123/VCxK.c b/board/BuS/EB+MCF-EV123/VCxK.c
new file mode 100644
index 0000000..736c101
--- /dev/null
+++ b/board/BuS/EB+MCF-EV123/VCxK.c
@@ -0,0 +1,136 @@
+/*
+ * (C) Copyright 2005 
+ * BuS Elektronik GmbH & Co.KG <esw@bus-elektonik.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/m5282.h>
+#include "VCxK.h"
+
+vu_char *vcxk_bws = (vu_char *)(CFG_CS3_BASE);
+#define VCXK_BWS vcxk_bws
+
+static ulong vcxk_driver;
+
+
+ulong search_vcxk_driver(void);
+void vcxk_cls(void);
+void vcxk_setbrightness(short brightness);
+int vcxk_request(void);
+int vcxk_acknowledge_wait(void);
+void vcxk_clear(void);
+
+int init_vcxk(void)
+{
+	VIDEO_Invert_CFG &= ~VIDEO_Invert_IO;
+	VIDEO_INVERT_PORT |= VIDEO_INVERT_PIN;
+	VIDEO_INVERT_DDR  |= VIDEO_INVERT_PIN;
+
+	VIDEO_REQUEST_PORT |= VIDEO_REQUEST_PIN;
+	VIDEO_REQUEST_DDR |= VIDEO_REQUEST_PIN;
+
+	VIDEO_ACKNOWLEDGE_DDR &= ~VIDEO_ACKNOWLEDGE_PIN;
+
+	vcxk_driver = search_vcxk_driver();
+	if (vcxk_driver)
+	{
+		/* use flash resist driver */
+	}
+	else
+	{
+		vcxk_cls();
+		vcxk_cls();
+		vcxk_setbrightness(1000);
+	}
+	VIDEO_ENABLE_DDR |= VIDEO_ENABLE_PIN;
+	VIDEO_ENABLE_PORT |= VIDEO_ENABLE_PIN;
+	VIDEO_ENABLE_PORT &= ~VIDEO_ENABLE_PIN;
+	return 1;
+}
+
+void 	vcxk_loadimage(ulong source)
+{
+	int cnt;
+	vcxk_acknowledge_wait();
+	for (cnt=0; cnt<16384; cnt++)
+	{
+		VCXK_BWS[cnt*2] = (*(vu_char*) source);
+		source++;
+	}
+	vcxk_request();
+}
+
+void vcxk_cls(void)
+{
+	vcxk_acknowledge_wait();
+	vcxk_clear();
+	vcxk_request();
+}
+
+void vcxk_clear(void)
+{
+	int cnt;
+	for (cnt=0; cnt<16384; cnt++)
+	{
+		VCXK_BWS[cnt*2] = 0x00;
+	}
+}
+
+void vcxk_setbrightness(short brightness)
+{
+	VCXK_BWS[0x8000]=(brightness >> 4) +2;
+	VCXK_BWS[0xC000]= (brightness + 23) >> 8;
+	VCXK_BWS[0xC001]= (brightness + 23) & 0xFF;
+}
+
+int vcxk_request(void)
+{
+	if (vcxk_driver)
+	{
+		/* use flash resist driver */
+	}
+	else
+	{
+		VIDEO_REQUEST_PORT &= ~VIDEO_REQUEST_PIN;
+		VIDEO_REQUEST_PORT |= VIDEO_REQUEST_PIN;
+	}
+	return 1;
+}
+
+int vcxk_acknowledge_wait(void)
+{
+	if (vcxk_driver)
+	{
+		/* use flash resist driver */
+	}
+	else
+	{
+		while (!(VIDEO_ACKNOWLEDGE_PORT & VIDEO_ACKNOWLEDGE_PIN));
+	}
+	return 1;
+}
+
+ulong search_vcxk_driver(void)
+{
+	return 0;
+}
+
+/* eof */
diff --git a/board/BuS/EB+MCF-EV123/VCxK.h b/board/BuS/EB+MCF-EV123/VCxK.h
new file mode 100644
index 0000000..74467ba
--- /dev/null
+++ b/board/BuS/EB+MCF-EV123/VCxK.h
@@ -0,0 +1,48 @@
+/*
+ * (C) Copyright 2005
+ * BuS Elektronik GmbH & Co.KG <esw@bus-elektonik.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __VCXK_H_
+#define __VCXK_H_
+
+extern int init_vcxk(void);
+void 	vcxk_loadimage(ulong source);
+
+#define VIDEO_ACKNOWLEDGE_PORT	MCFGPTB_GPTPORT
+#define VIDEO_ACKNOWLEDGE_DDR 	MCFGPTB_GPTDDR
+#define VIDEO_ACKNOWLEDGE_PIN	0x0001
+
+#define VIDEO_ENABLE_PORT    	MCFGPTB_GPTPORT
+#define VIDEO_ENABLE_DDR 	MCFGPTB_GPTDDR
+#define VIDEO_ENABLE_PIN	0x0002
+
+#define VIDEO_REQUEST_PORT   	MCFGPTB_GPTPORT
+#define VIDEO_REQUEST_DDR 	MCFGPTB_GPTDDR
+#define VIDEO_REQUEST_PIN	0x0004
+
+#define VIDEO_Invert_CFG	MCFGPIO_PEPAR
+#define VIDEO_Invert_IO		MCFGPIO_PEPAR_PEPA2
+#define VIDEO_INVERT_PORT   	MCFGPIO_PORTE
+#define VIDEO_INVERT_DDR 	MCFGPIO_DDRE
+#define VIDEO_INVERT_PIN	MCFGPIO_PORT2
+
+#endif
diff --git a/board/BuS/EB+MCF-EV123/cfm_flash.c b/board/BuS/EB+MCF-EV123/cfm_flash.c
new file mode 100644
index 0000000..d5a1c30
--- /dev/null
+++ b/board/BuS/EB+MCF-EV123/cfm_flash.c
@@ -0,0 +1,212 @@
+/*
+ * Basic Flash Driver for Freescale MCF 5281/5282 internal FLASH
+ *
+ * (C) Copyright 2005 BuS Elektronik GmbH & Co.KG <esw@bus-elektonik.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h> 
+#include <asm/m5282.h>
+#include  "cfm_flash.h"
+
+#if defined(CONFIG_M5281) || defined(CONFIG_M5282)
+
+#if (CFG_CLK>20000000)
+	#define CFM_CLK  (((long) CFG_CLK / (400000 * 8) + 1) | 0x40)
+#else
+	#define CFM_CLK  ((long) CFG_CLK / 400000 + 1)
+#endif
+
+#define cmf_backdoor_address(addr)	(((addr) & 0x0007FFFF) | 0x04000000 | \
+					 (CFG_MBAR & 0xC0000000))
+
+void cfm_flash_print_info (flash_info_t * info)
+{
+	printf ("Freescale: ");
+	switch (info->flash_id & FLASH_TYPEMASK) {
+	case FREESCALE_ID_MCF5281 & FLASH_TYPEMASK:
+		printf ("MCF5281 internal FLASH\n");
+		break;
+	case FREESCALE_ID_MCF5282 & FLASH_TYPEMASK:
+		printf ("MCF5282 internal FLASH\n");
+		break;
+	default:
+		printf ("Unknown Chip Type\n");
+		break;
+	}
+}
+
+void cfm_flash_init (flash_info_t * info)
+{
+	int sector;
+	ulong protection;
+	MCFCFM_MCR = 0;
+	MCFCFM_CLKD = CFM_CLK;
+	debug ("CFM Clock divider: %ld (%d Hz @ %ld Hz)\n",CFM_CLK,\
+	 	CFG_CLK / (2* ((CFM_CLK & 0x3F)+1) * (1+((CFM_CLK & 0x40)>>6)*7)),\
+		CFG_CLK);
+	MCFCFM_SACC = 0;
+	MCFCFM_DACC = 0;
+
+	if (MCFCFM_SEC & MCFCFM_SEC_KEYEN)
+		puts("CFM backdoor access is enabled\n");
+	if (MCFCFM_SEC & MCFCFM_SEC_SECSTAT)
+		puts("CFM securety is enabled\n");
+
+	#ifdef CONFIG_M5281
+		info->flash_id = (FREESCALE_MANUFACT & FLASH_VENDMASK) |
+				 (FREESCALE_ID_MCF5281 & FLASH_TYPEMASK);
+		info->size = 256*1024;
+		info->sector_count = 16;
+	#else
+		info->flash_id = (FREESCALE_MANUFACT & FLASH_VENDMASK) |
+				 (FREESCALE_ID_MCF5282 & FLASH_TYPEMASK);
+		info->size = 512*1024;
+		info->sector_count = 32;
+	#endif
+	protection = MCFCFM_PROT;
+	for (sector = 0; sector < info->sector_count; sector++)
+	{
+		if (sector == 0)
+		{
+			info->start[sector] = CFG_INT_FLASH_BASE;
+		}
+		else
+		{
+			info->start[sector] = info->start[sector-1] + 0x04000;
+		}
+		info->protect[sector] = protection & 1;
+		protection >>= 1;
+	}
+}
+
+int cfm_flash_readycheck(int checkblank)
+{
+	int	rc;
+	unsigned char state;
+
+	rc	= ERR_OK;
+	while (!(MCFCFM_USTAT & MCFCFM_USTAT_CCIF));
+	state = MCFCFM_USTAT;
+	if (state & MCFCFM_USTAT_ACCERR)
+	{
+		debug ("%s(): CFM access error",__FUNCTION__);
+		rc = ERR_PROG_ERROR;
+	}
+	if (state & MCFCFM_USTAT_PVIOL)
+	{
+		debug ("%s(): CFM protection violation",__FUNCTION__);
+		rc = ERR_PROTECTED;
+	}
+	if (checkblank)
+	{
+		if (!(state & MCFCFM_USTAT_BLANK))
+		{
+			debug ("%s(): CFM erras error",__FUNCTION__);
+			rc = ERR_NOT_ERASED;
+		}
+	}
+	MCFCFM_USTAT = state & 0x34; /* reset state */
+	return rc;
+}
+
+/* Erase 16KiB = 8 2KiB pages */
+
+int cfm_flash_erase_sector (flash_info_t * info, int sector)
+{
+	ulong address;
+	int page;
+	int rc;
+	rc= ERR_OK;
+	address = cmf_backdoor_address(info->start[sector]);
+	for (page=0; (page<8) && (rc==ERR_OK); page++)
+	{
+		*(volatile __u32*) address = 0;
+		MCFCFM_CMD = MCFCFM_CMD_PGERS;
+		MCFCFM_USTAT = MCFCFM_USTAT_CBEIF;
+		rc = cfm_flash_readycheck(0);
+		if (rc==ERR_OK)
+		{
+			*(volatile __u32*) address = 0;
+			MCFCFM_CMD = MCFCFM_CMD_PGERSVER;
+			MCFCFM_USTAT = MCFCFM_USTAT_CBEIF;
+			rc = cfm_flash_readycheck(1);
+		}
+		address += 0x800;
+	}
+	return rc;
+}
+
+int cfm_flash_write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
+{
+	int rc;
+	ulong dest, data;
+
+	rc = ERR_OK;
+	if (addr & 3)
+	{
+		debug ("Byte and Word alignment not supported\n");
+		rc = ERR_ALIGN;
+	}
+	if (cnt & 3)
+	{
+		debug ("Byte and Word transfer not supported\n");
+		rc = ERR_ALIGN;
+	}
+	dest = cmf_backdoor_address(addr);
+	while ((cnt>=4) && (rc == ERR_OK))
+	{
+		data =*((volatile u32 *) src);
+		*(volatile u32*) dest = data;
+		MCFCFM_CMD = MCFCFM_CMD_PGM;
+		MCFCFM_USTAT = MCFCFM_USTAT_CBEIF;
+		rc = cfm_flash_readycheck(0);
+		if (*(volatile u32*) addr != data) rc = ERR_PROG_ERROR;
+		src +=4;
+		dest +=4;
+		addr +=4;
+		cnt -=4;
+	}
+	return rc;
+}
+
+#ifdef CFG_FLASH_PROTECTION
+
+int cfm_flash_protect(flash_info_t * info,long sector,int prot)
+{
+	int rc;
+
+	rc= ERR_OK;
+	if (prot)
+	{
+		MCFCFM_PROT |= (1<<sector);
+		info->protect[sector]=1;
+	}
+	else
+	{
+		MCFCFM_PROT &= ~(1<<sector);
+		info->protect[sector]=0;
+	}
+	return rc;
+}
+
+#endif
+
+#endif
diff --git a/board/BuS/EB+MCF-EV123/cfm_flash.h b/board/BuS/EB+MCF-EV123/cfm_flash.h
new file mode 100644
index 0000000..cc8cdbd
--- /dev/null
+++ b/board/BuS/EB+MCF-EV123/cfm_flash.h
@@ -0,0 +1,40 @@
+/*
+ * Basic Flash Driver for Freescale MCF 5282 internal FLASH
+ *
+ * (C) Copyright 2005 BuS Elektronik GmbH & Co.KG <esw@bus-elektonik.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CFM_FLASH_H_
+#define __CFM_FLASH_H_
+
+#define	FREESCALE_MANUFACT 0xFACFFACF
+#define	FREESCALE_ID_MCF5281 0x5281
+#define	FREESCALE_ID_MCF5282 0x5282
+
+extern void cfm_flash_print_info (flash_info_t * info);
+extern int cfm_flash_erase_sector (flash_info_t * info, int sector);
+extern void cfm_flash_init (flash_info_t * info);
+extern int cfm_flash_write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt);
+#ifdef CFG_FLASH_PROTECTION
+extern int cfm_flash_protect(flash_info_t * info,long sector,int prot);
+#endif
+
+#endif
diff --git a/board/BuS/EB+MCF-EV123/config.mk b/board/BuS/EB+MCF-EV123/config.mk
new file mode 100644
index 0000000..9fe2fc5
--- /dev/null
+++ b/board/BuS/EB+MCF-EV123/config.mk
@@ -0,0 +1,28 @@
+#
+# (C) Copyright 2000-2003
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+# Coldfire contribution by Bernhard Kuhn <bkuhn@metrowerks.com>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+sinclude $(TOPDIR)/board/$(BOARDDIR)/textbase.mk
+ifndef TEXT_BASE
+TEXT_BASE = 0xFE000000
+endif
diff --git a/board/BuS/EB+MCF-EV123/flash.c b/board/BuS/EB+MCF-EV123/flash.c
new file mode 100644
index 0000000..a5d621c
--- /dev/null
+++ b/board/BuS/EB+MCF-EV123/flash.c
@@ -0,0 +1,413 @@
+/*
+ * (C) Copyright 2005 
+ * BuS Elektronik GmbH & Co.KG <esw@bus-elektonik.de>
+ * 
+ * Based On
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include  "cfm_flash.h"
+
+#define PHYS_FLASH_1 CFG_FLASH_BASE
+#define FLASH_BANK_SIZE 0x200000
+
+flash_info_t flash_info[CFG_MAX_FLASH_BANKS];
+
+void flash_print_info (flash_info_t * info)
+{
+	int i;
+
+	switch (info->flash_id & FLASH_VENDMASK) {
+	case (AMD_MANUFACT & FLASH_VENDMASK):
+		printf ("AMD: ");
+		switch (info->flash_id & FLASH_TYPEMASK) {
+		case (AMD_ID_LV160B & FLASH_TYPEMASK):
+			printf ("AM29LV160B (16Bit)\n");
+			break;
+		default:
+			printf ("Unknown Chip Type\n");
+			break;
+		}
+		break;
+	case FREESCALE_MANUFACT & FLASH_VENDMASK:
+		cfm_flash_print_info (info);
+		break;
+	default:
+		printf ("Unknown Vendor ");
+		break;
+	}
+
+	puts ("  Size: ");
+	if ((info->size >> 20) > 0)
+	{
+		printf ("%ld MiB",info->size >> 20);
+	}
+	else
+	{
+		printf ("%ld KiB",info->size >> 10);
+	}
+	printf (" in %d Sectors\n", info->sector_count);
+
+	printf ("  Sector Start Addresses:");
+	for (i = 0; i < info->sector_count; i++) {
+		if ((i % 4) == 0) {
+			printf ("\n    ");
+		}
+		printf ("%02d: %08lX%s  ", i,info->start[i],
+			info->protect[i] ? " P" : "  ");
+	}
+	printf ("\n\n");
+}
+
+unsigned long flash_init (void)
+{
+	int i, j;
+	ulong size = 0;
+
+	for (i = 0; i < CFG_MAX_FLASH_BANKS; i++) {
+		ulong flashbase = 0;
+
+		switch (i)
+		{
+		case 1:
+			flash_info[i].flash_id =
+				(AMD_MANUFACT & FLASH_VENDMASK) |
+				(AMD_ID_LV160B & FLASH_TYPEMASK);
+			flash_info[i].size = FLASH_BANK_SIZE;
+			flash_info[i].sector_count = CFG_MAX_FLASH_SECT;
+			memset (flash_info[i].protect, 0, CFG_MAX_FLASH_SECT);
+			flashbase = PHYS_FLASH_1;
+			for (j = 0; j < flash_info[i].sector_count; j++) {
+				if (j == 0) {
+					/* 1st is 16 KiB */
+					flash_info[i].start[j] = flashbase;
+				}
+				if ((j >= 1) && (j <= 2)) {
+				/* 2nd and 3rd are 8 KiB */
+					flash_info[i].start[j] =
+						flashbase + 0x4000 + 0x2000 * (j - 1);
+				}
+				if (j == 3) {
+					/* 4th is 32 KiB */
+					flash_info[i].start[j] = flashbase + 0x8000;
+				}
+				if ((j >= 4) && (j <= 34)) {
+					/* rest is 256 KiB */
+					flash_info[i].start[j] =
+						flashbase + 0x10000 + 0x10000 * (j - 4);
+				}
+			}
+			break;
+		case 0:
+			cfm_flash_init (&flash_info[i]);
+			break;
+		default:
+			panic ("configured to many flash banks!\n");
+		}
+
+		size += flash_info[i].size;
+	}
+
+	flash_protect (FLAG_PROTECT_SET,
+		       CFG_FLASH_BASE,
+		       CFG_FLASH_BASE + 0xffff, &flash_info[0]);
+
+	return size;
+}
+
+#define CMD_READ_ARRAY		0x00F0
+#define CMD_UNLOCK1		0x00AA
+#define CMD_UNLOCK2		0x0055
+#define CMD_ERASE_SETUP		0x0080
+#define CMD_ERASE_CONFIRM	0x0030
+#define CMD_PROGRAM		0x00A0
+#define CMD_UNLOCK_BYPASS	0x0020
+
+#define MEM_FLASH_ADDR1		(*(volatile u16 *)(info->start[0] + (0x00000555<<1)))
+#define MEM_FLASH_ADDR2		(*(volatile u16 *)(info->start[0] + (0x000002AA<<1)))
+
+
+#define BIT_ERASE_DONE		0x0080
+#define BIT_RDY_MASK		0x0080
+#define BIT_PROGRAM_ERROR	0x0020
+#define BIT_TIMEOUT		0x80000000	/* our flag */
+
+#define ERR_READY -1
+
+int amd_flash_erase_sector(flash_info_t * info, int sector)
+{
+	int state;
+	ulong result;
+
+	volatile u16 *addr =
+				(volatile u16 *) (info->start[sector]);
+
+	MEM_FLASH_ADDR1 = CMD_UNLOCK1;
+	MEM_FLASH_ADDR2 = CMD_UNLOCK2;
+	MEM_FLASH_ADDR1 = CMD_ERASE_SETUP;
+
+	MEM_FLASH_ADDR1 = CMD_UNLOCK1;
+	MEM_FLASH_ADDR2 = CMD_UNLOCK2;
+	*addr = CMD_ERASE_CONFIRM;
+
+	/* wait until flash is ready */
+	state = 0;
+	set_timer (0);
+
+	do {
+		result = *addr;
+
+		/* check timeout */
+		if (get_timer (0) > CFG_FLASH_ERASE_TOUT) {
+			MEM_FLASH_ADDR1 = CMD_READ_ARRAY;
+			state = ERR_TIMOUT;
+		}
+
+		if (!state && (result & 0xFFFF) & BIT_ERASE_DONE)
+			state = ERR_READY;
+	}
+	while (!state);
+	if (state == ERR_READY)
+		state = ERR_OK;
+
+	MEM_FLASH_ADDR1 = CMD_READ_ARRAY;
+
+	return state;
+}
+
+int flash_erase (flash_info_t * info, int s_first, int s_last)
+{
+	int iflag, cflag;
+	int sector;
+	int rc;
+
+	rc = ERR_OK;
+
+	if (info->flash_id == FLASH_UNKNOWN)
+	{
+		rc = ERR_UNKNOWN_FLASH_TYPE;
+	} /* (info->flash_id == FLASH_UNKNOWN) */
+
+	if ((s_first < 0) || (s_first > s_last) || s_last >= info->sector_count)
+	{
+		rc = ERR_INVAL;
+	}
+
+	cflag = icache_status ();
+	icache_disable ();
+	iflag = disable_interrupts ();
+
+	for (sector = s_first; (sector <= s_last) && (rc == ERR_OK); sector++) {
+
+		if (info->protect[sector])
+		{
+			putc('P'); /*  protected sector will not erase */
+		}
+		else
+		{
+			/* erase on unprotected sector */
+			puts("E\b");
+			switch (info->flash_id & FLASH_VENDMASK)
+			{
+			case (AMD_MANUFACT & FLASH_VENDMASK):
+				rc = amd_flash_erase_sector(info,sector);
+				break;
+			case (FREESCALE_MANUFACT & FLASH_VENDMASK):
+				rc = cfm_flash_erase_sector(info,sector);
+				break;
+			default:
+				return ERR_UNKNOWN_FLASH_VENDOR;
+			}
+			putc('.');
+		}
+	}
+	if (rc!=ERR_OK)
+	{
+		printf ("\n   ");
+		flash_perror (rc);
+	}
+	else
+	{
+		printf (" done\n");
+	}
+
+	udelay (10000);	/* allow flash to settle - wait 10 ms */
+
+	if (iflag)
+		enable_interrupts ();
+
+	if (cflag)
+  		icache_enable ();
+
+	return rc;
+}
+
+volatile static int amd_write_word (flash_info_t * info, ulong dest, u16 data)
+{
+	volatile u16 *addr;
+	ulong result;
+	int cflag, iflag;
+	int state;
+
+	/*
+	 * Check if Flash is (sufficiently) erased
+	 */
+	addr = (volatile u16 *) dest;
+
+	result = *addr;
+	if ((result & data) != data)
+		return ERR_NOT_ERASED;
+
+	/*
+	 * Disable interrupts which might cause a timeout
+	 * here. Remember that our exception vectors are
+	 * at address 0 in the flash, and we don't want a
+	 * (ticker) exception to happen while the flash
+	 * chip is in programming mode.
+	 */
+
+	cflag = icache_status ();
+	icache_disable ();
+	iflag = disable_interrupts ();
+
+	MEM_FLASH_ADDR1 = CMD_UNLOCK1;
+	MEM_FLASH_ADDR2 = CMD_UNLOCK2;
+	MEM_FLASH_ADDR1 = CMD_PROGRAM;
+	*addr = data;
+
+	/* arm simple, non interrupt dependent timer */
+	set_timer (0);
+
+	/* wait until flash is ready */
+	state = 0;
+	do {
+		result = *addr;
+
+		/* check timeout */
+		if (get_timer (0) > CFG_FLASH_ERASE_TOUT) {
+				state = ERR_TIMOUT;
+		}
+		if (!state && ((result & BIT_RDY_MASK) == (data & BIT_RDY_MASK)))
+			state = ERR_READY;
+
+	} while (!state);
+
+	*addr = CMD_READ_ARRAY;
+
+	if (state == ERR_READY)
+		state = ERR_OK;
+	if ((*addr != data) && (state != ERR_TIMOUT))
+		state = ERR_PROG_ERROR;
+
+	if (iflag)
+		enable_interrupts ();
+
+	if (cflag)
+		icache_enable ();
+
+	return state;
+}
+
+int amd_flash_write_buff(flash_info_t * info, uchar * src, ulong addr, ulong cnt)
+{
+	int rc;
+	ulong dest;
+	u16 data;
+
+	rc = ERR_OK;
+	if (addr & 1)
+	{
+		debug ("Byte alignment not supported\n");
+		rc = ERR_ALIGN;
+	}
+	if (cnt & 1)
+	{
+		debug ("Byte transfer not supported\n");
+		rc = ERR_ALIGN;
+	}
+
+	dest = addr;
+	while ((cnt>=2) && (rc == ERR_OK))
+	{
+		data =*((volatile u16 *) src);
+		rc=amd_write_word (info,dest,data);
+		src +=2;
+		dest +=2;
+		cnt -=2;
+	}
+	return rc;
+}
+
+int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
+{
+	int rc;
+
+	switch (info->flash_id & FLASH_VENDMASK)
+	{
+		case (AMD_MANUFACT & FLASH_VENDMASK):
+			rc = amd_flash_write_buff(info,src,addr,cnt);
+			break;
+		case (FREESCALE_MANUFACT & FLASH_VENDMASK):
+			rc = cfm_flash_write_buff(info,src,addr,cnt);
+			break;
+		default:
+			rc = ERR_UNKNOWN_FLASH_VENDOR;
+	}
+	return rc;
+
+}
+int amd_flash_protect(flash_info_t * info,long sector,int prot)
+{
+	int rc;
+	rc= ERR_OK;
+	if (prot)
+	{
+		info->protect[sector]=1;
+	}
+	else
+	{
+		info->protect[sector]=0;
+	}
+	return rc;
+}
+
+#ifdef CFG_FLASH_PROTECTION
+
+int flash_real_protect(flash_info_t * info,long sector,int prot)
+{
+	int rc;
+
+	switch (info->flash_id & FLASH_VENDMASK)
+	{
+		case (AMD_MANUFACT & FLASH_VENDMASK):
+			rc = amd_flash_protect(info,sector,prot);
+			break;
+		case (FREESCALE_MANUFACT & FLASH_VENDMASK):
+			rc = cfm_flash_protect(info,sector,prot);
+			break;
+		default:
+			rc = ERR_UNKNOWN_FLASH_VENDOR;
+	}
+	return rc;
+}
+
+#endif
diff --git a/board/BuS/EB+MCF-EV123/textbase.mk b/board/BuS/EB+MCF-EV123/textbase.mk
new file mode 100644
index 0000000..10106f4
--- /dev/null
+++ b/board/BuS/EB+MCF-EV123/textbase.mk
@@ -0,0 +1 @@
+TEXT_BASE = 0xF0000000
diff --git a/board/BuS/EB+MCF-EV123/u-boot.lds b/board/BuS/EB+MCF-EV123/u-boot.lds
new file mode 100644
index 0000000..d790018
--- /dev/null
+++ b/board/BuS/EB+MCF-EV123/u-boot.lds
@@ -0,0 +1,141 @@
+/*
+ * (C) Copyright 2000-2003
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(m68k)
+SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib);
+/* Do we need any of these for elf?
+   __DYNAMIC = 0;    */
+SECTIONS
+{
+  /* Read-only sections, merged into text segment: */
+  . = + SIZEOF_HEADERS;
+  .interp : { *(.interp) }
+  .hash          : { *(.hash)		}
+  .dynsym        : { *(.dynsym)		}
+  .dynstr        : { *(.dynstr)		}
+  .rel.text      : { *(.rel.text)		}
+  .rela.text     : { *(.rela.text) 	}
+  .rel.data      : { *(.rel.data)		}
+  .rela.data     : { *(.rela.data) 	}
+  .rel.rodata    : { *(.rel.rodata) 	}
+  .rela.rodata   : { *(.rela.rodata) 	}
+  .rel.got       : { *(.rel.got)		}
+  .rela.got      : { *(.rela.got)		}
+  .rel.ctors     : { *(.rel.ctors)	}
+  .rela.ctors    : { *(.rela.ctors)	}
+  .rel.dtors     : { *(.rel.dtors)	}
+  .rela.dtors    : { *(.rela.dtors)	}
+  .rel.bss       : { *(.rel.bss)		}
+  .rela.bss      : { *(.rela.bss)		}
+  .rel.plt       : { *(.rel.plt)		}
+  .rela.plt      : { *(.rela.plt)		}
+  .init          : { *(.init)	}
+  .plt : { *(.plt) }
+  .text      :
+  {
+    /* WARNING - the following is hand-optimized to fit within	*/
+    /* the sector layout of our flash chips!	XXX FIXME XXX	*/
+
+    cpu/mcf52x2/start.o	(.text)
+    common/dlmalloc.o	(.text)
+    lib_generic/string.o	(.text)
+    lib_generic/vsprintf.o	(.text)
+    lib_generic/crc32.o	(.text)
+    lib_generic/zlib.o	(.text)
+
+/*    . = env_offset; */
+    common/environment.o(.text)
+
+    *(.text)
+    *(.fixup)
+    *(.got1)
+  }
+  _etext = .;
+  PROVIDE (etext = .);
+  .rodata    :
+  {
+    *(.rodata)
+    *(.rodata1)
+  }
+  .fini      : { *(.fini)    } =0
+  .ctors     : { *(.ctors)   }
+  .dtors     : { *(.dtors)   }
+
+  /* Read-write section, merged into data segment: */
+  . = (. + 0x00FF) & 0xFFFFFF00;
+  _erotext = .;
+  PROVIDE (erotext = .);
+    .reloc   :
+  {
+    __got_start = .;
+    *(.got)
+    __got_end = .;
+    _GOT2_TABLE_ = .;
+    *(.got2)
+    _FIXUP_TABLE_ = .;
+    *(.fixup)
+  }
+  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
+  __fixup_entries = (. - _FIXUP_TABLE_)>>2;
+
+  .data    :
+  {
+    *(.data)
+    *(.data1)
+    *(.sdata)
+    *(.sdata2)
+    *(.dynamic)
+    CONSTRUCTORS
+  }
+  _edata  =  .;
+  PROVIDE (edata = .);
+
+  __u_boot_cmd_start = .;
+  .u_boot_cmd : { *(.u_boot_cmd) }
+  __u_boot_cmd_end = .;
+
+  __start___ex_table = .;
+  __ex_table : { *(__ex_table) }
+  __stop___ex_table = .;
+
+  . = ALIGN(256);
+  __init_begin = .;
+  .text.init : { *(.text.init) }
+  .data.init : { *(.data.init) }
+  . = ALIGN(256);
+  __init_end = .;
+
+  __bss_start = .;
+  .bss       :
+  {
+   _sbss = .;
+   *(.sbss) *(.scommon)
+   *(.dynbss)
+   *(.bss)
+   *(COMMON)
+   . = ALIGN(4);
+   _ebss = .;
+  }
+  _end = . ;
+  PROVIDE (end = .);
+}
diff --git a/config.mk b/config.mk
index dfbb1b7..6bf00a3 100644
--- a/config.mk
+++ b/config.mk
@@ -112,7 +112,7 @@ OBJDUMP = $(CROSS_COMPILE)objdump
 RANLIB	= $(CROSS_COMPILE)RANLIB
 
 RELFLAGS= $(PLATFORM_RELFLAGS)
-DBGFLAGS= -g #-DDEBUG
+DBGFLAGS= -g # -DDEBUG
 OPTFLAGS= -Os #-fomit-frame-pointer
 ifndef LDSCRIPT
 #LDSCRIPT := $(TOPDIR)/board/$(BOARDDIR)/u-boot.lds.debug
diff --git a/cpu/mcf52x2/cpu.c b/cpu/mcf52x2/cpu.c
index 32a524f..8795bcc 100644
--- a/cpu/mcf52x2/cpu.c
+++ b/cpu/mcf52x2/cpu.c
@@ -2,6 +2,10 @@
  * (C) Copyright 2003
  * Josef Baumgartner <josef.baumgartner@telex.de>
  *
+ * MCF5282 additionals
+ * (C) Copyright 2005
+ * BuS Elektronik GmbH & Co. KG <esw@bus-elektronik.de>
+ *
  * See file CREDITS for list of people who contributed to this
  * project.
  *
@@ -31,7 +35,8 @@
 #endif
 
 #ifdef	CONFIG_M5282
-
+#include <asm/m5282.h>
+#include <asm/immap_5282.h>
 #endif
 
 #ifdef	CONFIG_M5249
@@ -75,7 +80,6 @@ int checkcpu(void) {
 	return 0;
 };
 
-
 #if defined(CONFIG_WATCHDOG)
 /* Called by macro WATCHDOG_RESET */
 void watchdog_reset (void)
@@ -117,11 +121,26 @@ int watchdog_init (void)
 #ifdef	CONFIG_M5282
 int checkcpu (void)
 {
-	puts ("CPU:   MOTOROLA Coldfire MCF5282\n");
+	unsigned char resetsource;
+
+	printf ("CPU:   MOTOROLA Coldfire MCF5282 (PIN: %2.2x REV: %2.2x)\n",
+		MCFCCM_CIR>>8,MCFCCM_CIR & MCFCCM_CIR_PRN_MASK);
+	puts ("Reset: ");
+	resetsource = MCFRESET_RSR;
+	if (resetsource & MCFRESET_RSR_LOL) puts("Lose-of-lock ");
+	if (resetsource & MCFRESET_RSR_LOC) puts("Lose-of-clock ");
+	if (resetsource & MCFRESET_RSR_EXT) puts("external ");
+	if (resetsource & MCFRESET_RSR_POR) puts("Power-on ");
+	if (resetsource & MCFRESET_RSR_WDR) puts("Watchdog ");
+	if (resetsource & MCFRESET_RSR_SOFT) puts("Software ");
+	if (resetsource & MCFRESET_RSR_LVD) puts("Low-voltage ");
+	puts("\n");
 	return 0;
 }
 
-int do_reset (cmd_tbl_t *cmdtp, bd_t *bd, int flag, int argc, char *argv[]) {
+int do_reset (cmd_tbl_t *cmdtp, bd_t *bd, int flag, int argc, char *argv[])
+{
+	MCFRESET_RCR = MCFRESET_RCR_SOFTRST;
 	return 0;
 };
 #endif
diff --git a/cpu/mcf52x2/cpu_init.c b/cpu/mcf52x2/cpu_init.c
index 350c431..0fa2ce2 100644
--- a/cpu/mcf52x2/cpu_init.c
+++ b/cpu/mcf52x2/cpu_init.c
@@ -2,6 +2,10 @@
  * (C) Copyright 2003
  * Josef Baumgartner <josef.baumgartner@telex.de>
  *
+ * MCF5282 additionals
+ * (C) Copyright 2005
+ * BuS Elektronik GmbH & Co. KG <esw@bus-elektronik.de>
+ *
  * See file CREDITS for list of people who contributed to this
  * project.
  *
@@ -135,7 +139,180 @@ int cpu_init_r  (void)
  */
 void cpu_init_f (void)
 {
+#ifndef CONFIG_WATCHDOG
+	/* disable watchdog if we aren't using it */
+	MCFWTM_WCR = 0;
+#endif
+
+#ifndef CONFIG_MONITOR_IS_IN_RAM
+	/* Set speed /PLL */
+	MCFCLOCK_SYNCR =  MCFCLOCK_SYNCR_MFD(CFG_MFD) | MCFCLOCK_SYNCR_RFD(CFG_RFD);
+
+	/* Set up the GPIO ports */
+#ifdef CFG_PEPAR
+	MCFGPIO_PEPAR = CFG_PEPAR;
+#endif
+#ifdef	CFG_PFPAR
+	MCFGPIO_PFPAR = CFG_PFPAR;
+#endif
+#ifdef CFG_PJPAR
+	MCFGPIO_PJPAR = CFG_PJPAR;
+#endif
+#ifdef CFG_PSDPAR
+	MCFGPIO_PSDPAR = CFG_PSDPAR;
+#endif
+#ifdef CFG_PASPAR
+	MCFGPIO_PASPAR = CFG_PASPAR;
+#endif
+#ifdef CFG_PEHLPAR
+	MCFGPIO_PEHLPAR = CFG_PEHLPAR;
+#endif
+#ifdef CFG_PQSPAR
+	MCFGPIO_PQSPAR = CFG_PQSPAR;
+#endif
+#ifdef CFG_PTCPAR
+	MCFGPIO_PTCPAR = CFG_PTCPAR;
+#endif
+#ifdef CFG_PTDPAR
+	MCFGPIO_PTDPAR = CFG_PTDPAR;
+#endif
+#ifdef CFG_PUAPAR
+	MCFGPIO_PUAPAR = CFG_PUAPAR;
+#endif
+
+#ifdef CFG_DDRUA
+	MCFGPIO_DDRUA = CFG_DDRUA;
+#endif
+
+	/* This is probably a bad place to setup chip selects, but everyone
+	   else is doing it! */
+
+#if defined(CFG_CS0_BASE) & defined(CFG_CS0_SIZE) & \
+    defined(CFG_CS0_WIDTH) & defined(CFG_CS0_RO) & \
+	defined(CFG_CS0_WS)
+
+	MCFCSM_CSAR0 =	(CFG_CS0_BASE >> 16) & 0xFFFF;
+
+	#if (CFG_CS0_WIDTH == 8)
+		#define	 CFG_CS0_PS  MCFCSM_CSCR_PS_8
+	#elif (CFG_CS0_WIDTH == 16)
+		#define	 CFG_CS0_PS  MCFCSM_CSCR_PS_16
+	#elif (CFG_CS0_WIDTH == 32)
+		#define	 CFG_CS0_PS  MCFCSM_CSCR_PS_32
+	#else
+		#error	"CFG_CS0_WIDTH: Fault - wrong bus with for CS0"
+	#endif
+	MCFCSM_CSCR0 =	MCFCSM_CSCR_WS(CFG_CS0_WS)
+			|CFG_CS0_PS
+			|MCFCSM_CSCR_AA;
+
+	#if (CFG_CS0_RO != 0)
+		MCFCSM_CSMR0 =	MCFCSM_CSMR_BAM(CFG_CS0_SIZE-1)
+				|MCFCSM_CSMR_WP|MCFCSM_CSMR_V;
+ 	#else
+		MCFCSM_CSMR0 =	MCFCSM_CSMR_BAM(CFG_CS0_SIZE-1)|MCFCSM_CSMR_V;
+	#endif
+#else
+	#waring "Chip Select 0 are not initialized/used"
+#endif
+
+#if defined(CFG_CS1_BASE) & defined(CFG_CS1_SIZE) & \
+    defined(CFG_CS1_WIDTH) & defined(CFG_CS1_RO) & \
+	defined(CFG_CS1_WS)
+
+	MCFCSM_CSAR1 = (CFG_CS1_BASE >> 16) & 0xFFFF;
+
+	#if (CFG_CS1_WIDTH == 8)
+		#define	 CFG_CS1_PS  MCFCSM_CSCR_PS_8
+	#elif (CFG_CS1_WIDTH == 16)
+		#define	 CFG_CS1_PS  MCFCSM_CSCR_PS_16
+	#elif (CFG_CS1_WIDTH == 32)
+		#define	 CFG_CS1_PS  MCFCSM_CSCR_PS_32
+	#else
+		#error	"CFG_CS1_WIDTH: Fault - wrong bus with for CS1"
+	#endif
+	MCFCSM_CSCR1 =	MCFCSM_CSCR_WS(CFG_CS1_WS)
+			|CFG_CS1_PS
+			|MCFCSM_CSCR_AA;
+
+	#if (CFG_CS1_RO != 0)
+		MCFCSM_CSMR1 =	MCFCSM_CSMR_BAM(CFG_CS1_SIZE-1)
+				|MCFCSM_CSMR_WP
+				|MCFCSM_CSMR_V;
+ 	#else
+		MCFCSM_CSMR1 =	MCFCSM_CSMR_BAM(CFG_CS1_SIZE-1)
+				|MCFCSM_CSMR_V;
+	#endif
+#else
+	#warning "Chip Select 1 are not initialized/used"
+#endif
+
+#if defined(CFG_CS2_BASE) & defined(CFG_CS2_SIZE) & \
+    defined(CFG_CS2_WIDTH) & defined(CFG_CS2_RO) & \
+	defined(CFG_CS2_WS)
+
+	MCFCSM_CSAR2 = (CFG_CS2_BASE >> 16) & 0xFFFF;
+
+	#if (CFG_CS2_WIDTH == 8)
+		#define	 CFG_CS2_PS  MCFCSM_CSCR_PS_8
+	#elif (CFG_CS2_WIDTH == 16)
+		#define	 CFG_CS2_PS  MCFCSM_CSCR_PS_16
+	#elif (CFG_CS2_WIDTH == 32)
+		#define	 CFG_CS2_PS  MCFCSM_CSCR_PS_32
+	#else
+		#error	"CFG_CS2_WIDTH: Fault - wrong bus with for CS2"
+	#endif
+	MCFCSM_CSCR2 =	MCFCSM_CSCR_WS(CFG_CS2_WS)
+			|CFG_CS2_PS
+			|MCFCSM_CSCR_AA;
+
+	#if (CFG_CS2_RO != 0)
+		MCFCSM_CSMR2 =	MCFCSM_CSMR_BAM(CFG_CS2_SIZE-1)
+				|MCFCSM_CSMR_WP
+				|MCFCSM_CSMR_V;
+ 	#else
+		MCFCSM_CSMR2 =	MCFCSM_CSMR_BAM(CFG_CS2_SIZE-1)
+				|MCFCSM_CSMR_V;
+	#endif
+#else
+	#warning "Chip Select 2 are not initialized/used"
+#endif
+
+#if defined(CFG_CS3_BASE) & defined(CFG_CS3_SIZE) & \
+    defined(CFG_CS3_WIDTH) & defined(CFG_CS3_RO) & \
+	defined(CFG_CS3_WS)
+
+	MCFCSM_CSAR3 = (CFG_CS3_BASE >> 16) & 0xFFFF;
+
+	#if (CFG_CS3_WIDTH == 8)
+		#define	 CFG_CS3_PS  MCFCSM_CSCR_PS_8
+	#elif (CFG_CS3_WIDTH == 16)
+		#define	 CFG_CS3_PS  MCFCSM_CSCR_PS_16
+	#elif (CFG_CS3_WIDTH == 32)
+		#define	 CFG_CS3_PS  MCFCSM_CSCR_PS_32
+	#else
+		#error	"CFG_CS3_WIDTH: Fault - wrong bus with for CS1"
+	#endif
+	MCFCSM_CSCR3 =	MCFCSM_CSCR_WS(CFG_CS3_WS)
+			|CFG_CS3_PS
+			|MCFCSM_CSCR_AA;
+
+	#if (CFG_CS3_RO != 0)
+		MCFCSM_CSMR3 =	MCFCSM_CSMR_BAM(CFG_CS3_SIZE-1)
+				|MCFCSM_CSMR_WP
+				|MCFCSM_CSMR_V;
+ 	#else
+		MCFCSM_CSMR3 =	MCFCSM_CSMR_BAM(CFG_CS3_SIZE-1)
+				|MCFCSM_CSMR_V;
+	#endif
+#else
+	#warning "Chip Select 3 are not initialized/used"
+#endif
+
+#endif /* CONFIG_MONITOR_IS_IN_RAM */
 
+	/* defer enabling cache until boot (see do_go) */
+	/* icache_enable(); */
 }
 
 /*
diff --git a/cpu/mcf52x2/fec.c b/cpu/mcf52x2/fec.c
index a5c50af..b8b82d0 100644
--- a/cpu/mcf52x2/fec.c
+++ b/cpu/mcf52x2/fec.c
@@ -200,7 +200,9 @@ int eth_rx (void)
 
 int eth_init (bd_t * bd)
 {
-
+#ifndef CFG_ENET_BD_BASE
+	DECLARE_GLOBAL_DATA_PTR;
+#endif
 	int i;
 	volatile fec_t *fecp = (fec_t *) (FEC_ADDR);
 
@@ -242,9 +244,13 @@ int eth_init (bd_t * bd)
 
 	/* Clear multicast address hash table
 	 */
+#ifdef	CONFIG_M5282
+	fecp->fec_ihash_table_high = 0;
+	fecp->fec_ihash_table_low = 0;
+#else
 	fecp->fec_hash_table_high = 0;
 	fecp->fec_hash_table_low = 0;
-
+#endif
 	/* Set maximum receive buffer size.
 	 */
 	fecp->fec_r_buff_size = PKT_MAXBLR_SIZE;
@@ -256,7 +262,16 @@ int eth_init (bd_t * bd)
 	txIdx = 0;
 
 	if (!rtx) {
+#ifdef CFG_ENET_BD_BASE
 		rtx = (RTXBD *) CFG_ENET_BD_BASE;
+#else
+		rtx = (RTXBD *) (CFG_MONITOR_BASE+gd->reloc_off -
+		                 (((PKTBUFSRX+TX_BUF_CNT)*+sizeof(cbd_t)
+				  +0xFF)
+				  & ~0xFF)
+				);
+		debug("set ENET_DB_BASE to %lX\n",(long) rtx);
+#endif
 	}
 
 	/*
@@ -294,11 +309,13 @@ int eth_init (bd_t * bd)
 	fecp->fec_r_cntrl = FEC_RCNTRL_MII_MODE;
 	fecp->fec_x_cntrl = FEC_TCNTRL_FDEN;
 #else  /* Half duplex mode */
-	fecp->fec_r_cntrl = FEC_RCNTRL_MII_MODE | FEC_RCNTRL_DRT;
+        fecp->fec_r_cntrl = (PKT_MAXBUF_SIZE << 16); /* set max frame length */
+	fecp->fec_r_cntrl |= FEC_RCNTRL_MII_MODE | FEC_RCNTRL_DRT;
 	fecp->fec_x_cntrl = 0;
 #endif
 	/* Set MII speed */
-	fecp->fec_mii_speed = 0x0e;
+        fecp->fec_mii_speed = (((CFG_CLK / 2) / (2500000 / 10)) + 5) / 10;
+        fecp->fec_mii_speed *= 2;
 
 	/* Configure port B for MII.
 	 */
@@ -402,7 +419,7 @@ static void mii_discover_phy (void)
 			 */
 			udelay (10000);	/* wait 10ms */
 		}
-		for (phyno = 0; phyno < 32 && phyaddr < 0; ++phyno) {
+		for (phyno = 1; phyno < 32 && phyaddr < 0; ++phyno) {
 			phytype = mii_send (mk_mii_read (phyno, PHY_PHYIDR1));
 #ifdef ET_DEBUG
 			printf ("PHY type 0x%x pass %d type ", phytype, pass);
diff --git a/cpu/mcf52x2/serial.c b/cpu/mcf52x2/serial.c
index 79628d0..fe412a0 100644
--- a/cpu/mcf52x2/serial.c
+++ b/cpu/mcf52x2/serial.c
@@ -65,6 +65,28 @@ void rs_serial_setbaudrate(int port,int baudrate)
 	uartp[MCFUART_UBG2] = ((int)clock & 0xff);  /* set lsb baud */
 	uartp[MCFUART_UFPD] = ((int)fraction & 0xf);  /* set baud fraction adjust */
 #endif
+#if  defined(CONFIG_M5282)
+	volatile unsigned char	*uartp;
+	long clock;
+
+	switch (port)
+	{
+	 case 1:
+	  uartp = (volatile unsigned char *) (CFG_MBAR + MCFUART_BASE2);
+	  break;
+	 case 2:
+	  uartp = (volatile unsigned char *) (CFG_MBAR + MCFUART_BASE3);
+	  break;
+ 	 default:
+	  uartp = (volatile unsigned char *) (CFG_MBAR + MCFUART_BASE1);
+	}
+
+	clock = (long) CFG_CLK / ((long) 32 * baudrate);      /* Set baud above */
+
+	uartp[MCFUART_UBG1] = (((int)clock >> 8) & 0xff);  /* set msb baud */
+	uartp[MCFUART_UBG2] = ((int) clock & 0xff);  /* set lsb baud */
+
+#endif
 };
 
 void rs_serial_init(int port,int baudrate)
@@ -74,10 +96,19 @@ void rs_serial_init(int port,int baudrate)
 	/*
 	 *	Reset UART, get it into known state...
 	 */
-	if (port == 0)
-		uartp = (volatile unsigned char *) (CFG_MBAR + MCFUART_BASE1);
-	else
-		uartp = (volatile unsigned char *) (CFG_MBAR + MCFUART_BASE2);
+	switch (port)
+	{
+	 case 1:
+	  uartp = (volatile unsigned char *) (CFG_MBAR + MCFUART_BASE2);
+	  break;
+	#if  defined(CONFIG_M5282)
+	 case 2:
+	  uartp = (volatile unsigned char *) (CFG_MBAR + MCFUART_BASE3);
+	  break;
+	 #endif
+ 	 default:
+	  uartp = (volatile unsigned char *) (CFG_MBAR + MCFUART_BASE1);
+	}
 
 	uartp[MCFUART_UCR] = MCFUART_UCR_CMDRESETRX;  /* reset RX */
 	uartp[MCFUART_UCR] = MCFUART_UCR_CMDRESETTX;  /* reset TX */
diff --git a/cpu/mcf52x2/start.S b/cpu/mcf52x2/start.S
index b4926e2..9a13491 100644
--- a/cpu/mcf52x2/start.S
+++ b/cpu/mcf52x2/start.S
@@ -54,8 +54,12 @@
  *	These vectors are to catch any un-intended traps.
  */
 _vectors:
-
-.long	0x00000000, _START
+ .long	0x00000000
+#ifndef CONFIG_M5282
+.long	_START
+#else
+.long	_start - TEXT_BASE
+#endif
 .long	_FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
 .long	_FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
 .long	_FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
@@ -96,20 +100,23 @@ _vectors:
 
 	.text
 
+
+#if defined(CFG_INT_FLASH_BASE) && \
+    (defined(CONFIG_M5282) || defined(CONFIG_M5281))
+	#if (TEXT_BASE == CFG_INT_FLASH_BASE)
+		.long	0x55AA55AA,0xAA55AA55 /* CFM Backdoorkey */
+		.long	0xFFFFFFFF /* all sectors protected */
+		.long	0x00000000 /* supervisor/User restriction */
+		.long	0x00000000 /* programm/data space restriction */
+		.long	0x00000000 /* Flash security */
+	#endif
+#endif
 	.globl	_start
 _start:
 	nop
 	nop
 	move.w #0x2700,%sr
 
-	/* if we come from a pre-loader we have no exception table and
-	 * therefore no VBR to set
-	 */
-#if !defined(CONFIG_MONITOR_IS_IN_RAM)
-	move.l	#CFG_FLASH_BASE, %d0
-	movec	%d0, %VBR
-#endif
-
 #if defined(CONFIG_M5272) || defined(CONFIG_M5249)
 	move.l	#(CFG_MBAR + 1), %d0		/* set MBAR address + valid flag */
 	move.c	%d0, %MBAR
@@ -129,13 +136,43 @@ _start:
 	move.l	#(CFG_MBAR + 1), %d0		/* set IPSBAR address + valid flag */
 	move.l	%d0, 0x40000000
 
+	/* Initialize RAMBAR1: locate SRAM and validate it */
+	move.l	#(CFG_INIT_RAM_ADDR + 0x21), %d0
+	movec	%d0, %RAMBAR1
+
+#if (TEXT_BASE == CFG_INT_FLASH_BASE)
+	/* Setup code in SRAM to initialize FLASHBAR, if start from internal Flash */
+
+	move.l #(_flashbar_setup-CFG_INT_FLASH_BASE), %a0
+	move.l #(_flashbar_setup_end-CFG_INT_FLASH_BASE), %a1
+	move.l #(CFG_INIT_RAM_ADDR), %a2
+_copy_flash:
+	move.l (%a0)+, (%a2)+
+	cmp.l %a0, %a1
+	bgt.s _copy_flash
+	jmp CFG_INIT_RAM_ADDR
+
+_flashbar_setup:
 	/* Initialize FLASHBAR: locate internal Flash and validate it */
 	move.l	#(CFG_INT_FLASH_BASE + 0x21), %d0
 	movec	%d0, %RAMBAR0
+	jmp _after_flashbar_copy.L	/* Force jump to absolute address */
+_flashbar_setup_end:
+	nop
+_after_flashbar_copy:
+#else
+	/* Setup code to initialize FLASHBAR, if start from external Memory */
+	move.l	#(CFG_INT_FLASH_BASE + 0x21), %d0
+	movec	%d0, %RAMBAR0
+#endif /* (TEXT_BASE == CFG_INT_FLASH_BASE) */
 
-	/* Initialize RAMBAR1: locate SRAM and validate it */
-	move.l	#(CFG_INIT_RAM_ADDR + 0x21), %d0
-	movec	%d0, %RAMBAR1
+#endif
+	/* if we come from a pre-loader we have no exception table and
+	 * therefore no VBR to set
+	 */
+#if !defined(CONFIG_MONITOR_IS_IN_RAM)
+	move.l	#CFG_FLASH_BASE, %d0
+	movec	%d0, %VBR
 #endif
 
 	/* invalidate and disable cache */
@@ -157,7 +194,6 @@ _start:
 	/* board_init_f() does not return
 
 /*------------------------------------------------------------------------------*/
-
 /*
  * void relocate_code (addr_sp, gd, addr_moni)
  *
@@ -180,7 +216,6 @@ relocate_code:
 	move.l #CFG_MONITOR_BASE, %a1
 	move.l #__init_end, %a2
 	move.l %a0, %a3
-
 	/* copy the code to RAM */
 1:
 	move.l (%a1)+, (%a3)+
@@ -191,14 +226,14 @@ relocate_code:
  * We are done. Do not return, instead branch to second part of board
  * initialization, now running from RAM.
  */
-	move.l	%a0, %a1
+ 	move.l	%a0, %a1
 	add.l	#(in_ram - CFG_MONITOR_BASE), %a1
 	jmp	(%a1)
 
 in_ram:
 
 clear_bss:
-	/*
+ 	/*
 	 * Now clear BSS segment
 	 */
 	move.l	%a0, %a1
@@ -228,6 +263,23 @@ clear_bss:
 	cmp.l	%a2, %a1
 	bne	7b
 
+#if defined(CONFIG_M5281) || defined(CONFIG_M5282)
+	/* patch the 3 accesspoints to 3 ichache_state */
+	/* quick and dirty */
+
+	move.l	%a0,%d1
+	add.l	#(icache_state - CFG_MONITOR_BASE),%d1
+	move.l	%a0,%a1
+	add.l	#(icache_state_access_1+2 - CFG_MONITOR_BASE),%a1
+	move.l  %d1,(%a1)
+	move.l	%a0,%a1
+	add.l	#(icache_state_access_2+2 - CFG_MONITOR_BASE),%a1
+	move.l  %d1,(%a1)
+	move.l	%a0,%a1
+	add.l	#(icache_state_access_3+2 - CFG_MONITOR_BASE),%a1
+	move.l  %d1,(%a1)
+#endif
+
 	/* calculate relative jump to board_init_r in ram */
 	move.l %a0, %a1
 	add.l #(board_init_r - CFG_MONITOR_BASE), %a1
@@ -235,6 +287,10 @@ clear_bss:
 	/* set parameters for board_init_r */
 	move.l %a0,-(%sp)		/* dest_addr */
 	move.l %d0,-(%sp)		/* gd */
+	#if defined(DEBUG) && (TEXT_BASE != CFG_INT_FLASH_BASE) && \
+	    defined(CFG_HALT_BEFOR_RAM_JUMP)
+ 		halt
+	#endif
 	jsr	(%a1)
 
 /*------------------------------------------------------------------------------*/
@@ -289,6 +345,7 @@ icache_enable:
 	move.l	#0x80400100, %d0		/* Setup cache mask, data cache disabel*/
 	movec	%d0, %CACR			/* Enable cache */
 	moveq	#1, %d0
+icache_state_access_1:
 	move.l	%d0, icache_state
 	rts
 #endif
@@ -323,18 +380,19 @@ icache_disable:
 	movec	%d0, %ACR0			/* Enable cache */
 	movec	%d0, %ACR1			/* Enable cache */
 	moveq	#0, %d0
+icache_state_access_2:
 	move.l	%d0, icache_state
 	rts
 
 	.globl	icache_status
 icache_status:
+icache_state_access_3:
 	move.l	icache_state, %d0
 	rts
 
 	.data
 icache_state:
-	.long	1
-
+	.long	0	/* cache is diabled on inirialization */
 
 /*------------------------------------------------------------------------------*/
 
diff --git a/doc/README.m68k b/doc/README.m68k
index d5accdd..6dea2b5 100644
--- a/doc/README.m68k
+++ b/doc/README.m68k
@@ -1,7 +1,12 @@
 
 U-Boot for Motorola M68K
 
-Last Update: January 12, 2004
+====================================================================
+History
+
+August 08,2005; 	Jens Scharsig <esw@bus-elektronik.de>
+			MCF5282 implementation without preloader
+January 12, 2004; 	<josef.baumgartner@telex.de>
 ====================================================================
 
 This file contains status information for the port of U-Boot to the
@@ -33,16 +38,8 @@ CPU specific code is located in: cpu/mcf52x2
 -----------------------------
 CPU specific code is located in: cpu/mcf52x2
 
-At the moment the code isn't fully implemented and still needs a pre-loader!
-The preloader must initialize the processor and then start u-boot. The board
-must be configured for a pre-loader (see 4.1)
-
-For the preloader, please see
-http://mailman.uclinux.org/pipermail/uclinux-dev/2003-December/023384.html
-
-U-boot is configured to run at 0x20000 at default. This can be configured by
-change TEXT_BASE in board/m5282evb/config.mk and CFG_MONITOR_BASE in
-include/configs/M5282EVB.h.
+The MCF5282 Port no longer needs a preloader and can place in external or
+internal FLASH.
 
 
 3. SUPPORTED BOARDs
@@ -67,6 +64,27 @@ Board specific code is located in: board/m5282evb
 
 To configure the board, type: make M5272C3_config
 
+At the moment the code isn't fully implemented and still needs a pre-loader!
+The preloader must initialize the processor and then start u-boot. The board
+must be configured for a pre-loader (see 4.1)
+
+For the preloader, please see
+http://mailman.uclinux.org/pipermail/uclinux-dev/2003-December/023384.html
+
+U-boot is configured to run at 0x20000 at default. This can be configured by
+change TEXT_BASE in board/m5282evb/config.mk and CFG_MONITOR_BASE in
+include/configs/M5282EVB.h.
+
+3.2 BuS EB+MCF-EV123
+---------------------
+
+Board specific code is located in: board/bus/EB+MCF-EV123
+
+To configure the board, type:
+
+make EB+MCF-EV123_config 		for external FLASH
+make EB+MCF-EV123_internal_config 	for internal FLASH
+
 
 4. CONFIGURATION OPTIONS/SETTINGS
 ----------------------------------
@@ -80,7 +98,6 @@ be compiled in. The start address of u-boot must be adjusted in
 the boards config header file (CFG_MONITOR_BASE) and Makefile
 (TEXT_BASE) to the load address.
 
-
 4.1 MCF5272 specific Options/Settings
 -------------------------------------
 
@@ -123,14 +140,27 @@ CFG_INT_FLASH_BASE
 CFG_ENET_BD_BASE
 		-- defines the base addres of the FEC buffer descriptors
 
+CFG_MFD
+		-- defines the PLL Multiplication Factor Devider
+		   (see table 9-4 of MCF user manual)
+CFG_RFD		-- defines the PLL Reduce Frecuency Devider
+		   (see table 9-4 of MCF user manual)
+
+CFG_CSx_BASE	-- defines the base address of chip select x
+CFG_CSx_SIZE	-- defines the memory size (address range) of chip select x
+CFG_CSx_WIDTH	-- defines the bus with of chip select x
+CFG_CSx_RO 	-- if set to 0 chip select x is read/wirte
+			else chipselct is read only
+CFG_CSx_WS	-- defines the number of wait states  of chip select x
+
+CFG_PxDDR	-- defines the contents of the Data Direction Registers
+CFG_PxDAT	-- defines the contents of the Data Registers
+CFG_PXCNT	-- defines the contents of the Port Configuration Registers
+
+CFG_PxPAR	-- defines the function of ports
+
 
 5. COMPILER
 -----------
 To create U-Boot the gcc-2.95.3 compiler set (m68k-elf-20030314) from uClinux.org was used.
 You can download it from: http://www.uclinux.org/pub/uClinux/m68k-elf-tools/
-
-
-Regards,
-
-Josef
-<josef.baumgartner@telex.de>
diff --git a/include/asm-m68k/immap_5282.h b/include/asm-m68k/immap_5282.h
index f2b77db..a95912f 100644
--- a/include/asm-m68k/immap_5282.h
+++ b/include/asm-m68k/immap_5282.h
@@ -25,39 +25,63 @@
 #ifndef __IMMAP_5282__
 #define __IMMAP_5282__
 
+struct sys_ctrl {
+	uint ipsbar;
+	char res1[4];
+	uint rambar;
+	char res2[4];
+	uchar crsr;
+	uchar cwcr;
+	uchar lpicr;
+	uchar cwsr;
+	uint dmareqc;
+	char res3[4];
+	uint mpark;
+
+    /* TODO: finish these */
+};
+
+
 
 /* Fast ethernet controller registers
  */
 typedef struct fec {
-	uint	fec_ecntrl;		/* ethernet control register		*/
-	uint	fec_ievent;		/* interrupt event register		*/
-	uint	fec_imask;		/* interrupt mask register		*/
-	uint	fec_ivec;		/* interrupt level and vector status	*/
-	uint	fec_r_des_active;	/* Rx ring updated flag			*/
-	uint	fec_x_des_active;	/* Tx ring updated flag			*/
-	uint	res3[10];		/* reserved				*/
-	uint	fec_mii_data;		/* MII data register			*/
-	uint	fec_mii_speed;		/* MII speed control register		*/
-	uint	res4[17];		/* reserved				*/
-	uint	fec_r_bound;		/* end of RAM (read-only)		*/
-	uint	fec_r_fstart;		/* Rx FIFO start address		*/
-	uint	res5[6];		/* reserved				*/
-	uint	fec_x_fstart;		/* Tx FIFO start address		*/
-	uint	res7[21];		/* reserved				*/
-	uint	fec_r_cntrl;		/* Rx control register			*/
-	uint	fec_r_hash;		/* Rx hash register			*/
-	uint	res8[14];		/* reserved				*/
-	uint	fec_x_cntrl;		/* Tx control register			*/
-	uint	res9[0x9e];		/* reserved				*/
-	uint	fec_addr_low;		/* lower 32 bits of station address	*/
-	uint	fec_addr_high;		/* upper 16 bits of station address	*/
-	uint	fec_hash_table_high;	/* upper 32-bits of hash table		*/
-	uint	fec_hash_table_low;	/* lower 32-bits of hash table		*/
-	uint	fec_r_des_start;	/* beginning of Rx descriptor ring	*/
-	uint	fec_x_des_start;	/* beginning of Tx descriptor ring	*/
-	uint	fec_r_buff_size;	/* Rx buffer size			*/
-	uint	res2[9];		/* reserved				*/
-	uchar	fec_fifo[960];		/* fifo RAM				*/
+	uint    res1;		/* reserved                	1000*/
+	uint    fec_ievent;	/* interrupt event register	1004*/	/* EIR */
+	uint    fec_imask;	/* interrupt mask register	1008*/	/* EIMR */
+	uint    res2;		/* reserved			100c*/
+	uint    fec_r_des_active;    /* Rx ring updated flag	1010*/	/* RDAR */
+	uint    fec_x_des_active;    /* Tx ring updated flag	1014*/	/* XDAR */
+	uint    res3[3];        /* reserved			1018*/
+	uint    fec_ecntrl;	/* ethernet control register	1024*/	/* ECR */
+	uint    res4[6];        /* reserved			1028*/
+	uint    fec_mii_data;	/* MII data register		1040*/	/* MDATA */
+	uint    fec_mii_speed;	/* MII speed control register	1044*/	/* MSCR */
+                                      /*1044*/
+	uint    res5[7];	/* reserved			1048*/
+	uint    fec_mibc;	/* MIB Control/Status register	1064*/ /* MIBC */
+	uint    res6[7];	/* reserved			1068*/
+	uint    fec_r_cntrl;	/* Rx control register		1084*/	/* RCR */
+	uint    res7[15];	/* reserved			1088*/
+	uint    fec_x_cntrl;	/* Tx control register		10C4*/	/* TCR */
+	uint    res8[7];	/* reserved			10C8*/
+	uint    fec_addr_low;	/* lower 32 bits of station address */	/* PALR */
+	uint    fec_addr_high;	/* upper 16 bits of station address  */	/* PAUR */
+	uint    fec_opd;	/* opcode + pause duration	10EC*/	/* OPD */
+	uint    res9[10];	/* reserved			10F0*/
+	uint    fec_ihash_table_high;	/* upper 32-bits of individual hash *//* IAUR */
+	uint    fec_ihash_table_low;	/* lower 32-bits of individual hash  *//* IALR */
+	uint    fec_ghash_table_high;	/* upper 32-bits of group hash  *//* GAUR */
+	uint    fec_ghash_table_low;	/* lower 32-bits of group hash  *//* GALR */
+	uint    res10[7];	/* reserved			1128*/
+	uint    fec_tfwr;	/* Transmit FIFO watermark	1144*/	/* TFWR */
+	uint    res11;		/* reserved			1148*/
+	uint    fec_r_bound;	/* FIFO Receive Bound Register = end of *//* FRBR */
+	uint    fec_r_fstart;	/* FIFO Receive FIfo Start Registers =  *//* FRSR */
+	uint    res12[11];	/* reserved			1154*/
+	uint    fec_r_des_start;/* beginning of Rx descriptor ring    1180*//* ERDSR */
+	uint    fec_x_des_start;/* beginning of Tx descriptor ring    1184*//* ETDSR */
+	uint    fec_r_buff_size;/* Rx buffer size		1188*/	/* EMRBR */
 } fec_t;
 
 #endif /* __IMMAP_5282__ */
diff --git a/include/asm-m68k/m5282.h b/include/asm-m68k/m5282.h
index 073b0bc..e5058a4 100644
--- a/include/asm-m68k/m5282.h
+++ b/include/asm-m68k/m5282.h
@@ -1,9 +1,6 @@
 /*
  * mcf5282.h -- Definitions for Motorola Coldfire 5282
  *
- * Based on mcf5282sim.h of uCLinux distribution:
- *      (C) Copyright 1999, Greg Ungerer (gerg@snapgear.com)
- *
  * See file CREDITS for list of people who contributed to this
  * project.
  *
@@ -34,27 +31,515 @@
 
 #define INT_RAM_SIZE	65536
 
+/* General Purpose I/O Module GPIO */
 
-/*
- *	Define the 5282 SIM register set addresses.
- */
-#define	MCFICM_INTC0		0x0c00		/* Base for Interrupt Ctrl 0 */
-#define	MCFICM_INTC1		0x0d00		/* Base for Interrupt Ctrl 0 */
-#define	MCFINTC_IPRH		0x00		/* Interrupt pending 32-63 */
-#define	MCFINTC_IPRL		0x04		/* Interrupt pending 1-31 */
-#define	MCFINTC_IMRH		0x08		/* Interrupt mask 32-63 */
-#define	MCFINTC_IMRL		0x0c		/* Interrupt mask 1-31 */
-#define	MCFINTC_INTFRCH		0x10		/* Interrupt force 32-63 */
-#define	MCFINTC_INTFRCL		0x14		/* Interrupt force 1-31 */
-#define	MCFINTC_IRLR		0x18		/* */
-#define	MCFINTC_IACKL		0x19		/* */
-#define	MCFINTC_ICR0		0x40		/* Base ICR register */
-
-#define	MCFINT_UART0		13		/* Interrupt number for UART0 */
-#define	MCFINT_PIT1		55		/* Interrupt number for PIT1 */
-
-#define	MCF5282_GPIO_PUAPAR	0x10005C
+#define MCFGPIO_PORTA		(*(vu_char *) (CFG_MBAR+0x100000))
+#define MCFGPIO_PORTB		(*(vu_char *) (CFG_MBAR+0x100001))
+#define MCFGPIO_PORTC		(*(vu_char *) (CFG_MBAR+0x100002))
+#define MCFGPIO_PORTD		(*(vu_char *) (CFG_MBAR+0x100003))
+#define MCFGPIO_PORTE		(*(vu_char *) (CFG_MBAR+0x100004))
+#define MCFGPIO_PORTF		(*(vu_char *) (CFG_MBAR+0x100005))
+#define MCFGPIO_PORTG		(*(vu_char *) (CFG_MBAR+0x100006))
+#define MCFGPIO_PORTH		(*(vu_char *) (CFG_MBAR+0x100007))
+#define MCFGPIO_PORTJ		(*(vu_char *) (CFG_MBAR+0x100008))
+#define MCFGPIO_PORTDD		(*(vu_char *) (CFG_MBAR+0x100009))
+#define MCFGPIO_PORTEH		(*(vu_char *) (CFG_MBAR+0x10000A))
+#define MCFGPIO_PORTEL		(*(vu_char *) (CFG_MBAR+0x10000B))
+#define MCFGPIO_PORTAS		(*(vu_char *) (CFG_MBAR+0x10000C))
+#define MCFGPIO_PORTQS		(*(vu_char *) (CFG_MBAR+0x10000D))
+#define MCFGPIO_PORTSD		(*(vu_char *) (CFG_MBAR+0x10000E))
+#define MCFGPIO_PORTTC		(*(vu_char *) (CFG_MBAR+0x10000F))
+#define MCFGPIO_PORTTD		(*(vu_char *) (CFG_MBAR+0x100010))
+#define MCFGPIO_PORTUA		(*(vu_char *) (CFG_MBAR+0x100011))
+
+#define MCFGPIO_DDRA		(*(vu_char *) (CFG_MBAR+0x100014))
+#define MCFGPIO_DDRB		(*(vu_char *) (CFG_MBAR+0x100015))
+#define MCFGPIO_DDRC		(*(vu_char *) (CFG_MBAR+0x100016))
+#define MCFGPIO_DDRD		(*(vu_char *) (CFG_MBAR+0x100017))
+#define MCFGPIO_DDRE		(*(vu_char *) (CFG_MBAR+0x100018))
+#define MCFGPIO_DDRF		(*(vu_char *) (CFG_MBAR+0x100019))
+#define MCFGPIO_DDRG		(*(vu_char *) (CFG_MBAR+0x10001A))
+#define MCFGPIO_DDRH		(*(vu_char *) (CFG_MBAR+0x10001B))
+#define MCFGPIO_DDRJ		(*(vu_char *) (CFG_MBAR+0x10001C))
+#define MCFGPIO_DDRDD		(*(vu_char *) (CFG_MBAR+0x10001D))
+#define MCFGPIO_DDREH		(*(vu_char *) (CFG_MBAR+0x10001E))
+#define MCFGPIO_DDREL		(*(vu_char *) (CFG_MBAR+0x10001F))
+#define MCFGPIO_DDRAS		(*(vu_char *) (CFG_MBAR+0x100020))
+#define MCFGPIO_DDRQS		(*(vu_char *) (CFG_MBAR+0x100021))
+#define MCFGPIO_DDRSD		(*(vu_char *) (CFG_MBAR+0x100022))
+#define MCFGPIO_DDRTC		(*(vu_char *) (CFG_MBAR+0x100023))
+#define MCFGPIO_DDRTD		(*(vu_char *) (CFG_MBAR+0x100024))
+#define MCFGPIO_DDRUA		(*(vu_char *) (CFG_MBAR+0x100025))
+
+#define MCFGPIO_PORTAP		(*(vu_char *) (CFG_MBAR+0x100028))
+#define MCFGPIO_PORTBP		(*(vu_char *) (CFG_MBAR+0x100029))
+#define MCFGPIO_PORTCP		(*(vu_char *) (CFG_MBAR+0x10002A))
+#define MCFGPIO_PORTDP		(*(vu_char *) (CFG_MBAR+0x10002B))
+#define MCFGPIO_PORTEP		(*(vu_char *) (CFG_MBAR+0x10002C))
+#define MCFGPIO_PORTFP		(*(vu_char *) (CFG_MBAR+0x10002D))
+#define MCFGPIO_PORTGP		(*(vu_char *) (CFG_MBAR+0x10002E))
+#define MCFGPIO_PORTHP		(*(vu_char *) (CFG_MBAR+0x10002F))
+#define MCFGPIO_PORTJP		(*(vu_char *) (CFG_MBAR+0x100030))
+#define MCFGPIO_PORTDDP		(*(vu_char *) (CFG_MBAR+0x100031))
+#define MCFGPIO_PORTEHP		(*(vu_char *) (CFG_MBAR+0x100032))
+#define MCFGPIO_PORTELP		(*(vu_char *) (CFG_MBAR+0x100033))
+#define MCFGPIO_PORTASP		(*(vu_char *) (CFG_MBAR+0x100034))
+#define MCFGPIO_PORTQSP		(*(vu_char *) (CFG_MBAR+0x100035))
+#define MCFGPIO_PORTSDP		(*(vu_char *) (CFG_MBAR+0x100036))
+#define MCFGPIO_PORTTCP		(*(vu_char *) (CFG_MBAR+0x100037))
+#define MCFGPIO_PORTTDP		(*(vu_char *) (CFG_MBAR+0x100038))
+#define MCFGPIO_PORTUAP		(*(vu_char *) (CFG_MBAR+0x100039))
+
+#define MCFGPIO_SETA		(*(vu_char *) (CFG_MBAR+0x100028))
+#define MCFGPIO_SETB		(*(vu_char *) (CFG_MBAR+0x100029))
+#define MCFGPIO_SETC		(*(vu_char *) (CFG_MBAR+0x10002A))
+#define MCFGPIO_SETD		(*(vu_char *) (CFG_MBAR+0x10002B))
+#define MCFGPIO_SETE		(*(vu_char *) (CFG_MBAR+0x10002C))
+#define MCFGPIO_SETF		(*(vu_char *) (CFG_MBAR+0x10002D))
+#define MCFGPIO_SETG   		(*(vu_char *) (CFG_MBAR+0x10002E))
+#define MCFGPIO_SETH   		(*(vu_char *) (CFG_MBAR+0x10002F))
+#define MCFGPIO_SETJ   		(*(vu_char *) (CFG_MBAR+0x100030))
+#define MCFGPIO_SETDD  		(*(vu_char *) (CFG_MBAR+0x100031))
+#define MCFGPIO_SETEH  		(*(vu_char *) (CFG_MBAR+0x100032))
+#define MCFGPIO_SETEL  		(*(vu_char *) (CFG_MBAR+0x100033))
+#define MCFGPIO_SETAS  		(*(vu_char *) (CFG_MBAR+0x100034))
+#define MCFGPIO_SETQS  		(*(vu_char *) (CFG_MBAR+0x100035))
+#define MCFGPIO_SETSD  		(*(vu_char *) (CFG_MBAR+0x100036))
+#define MCFGPIO_SETTC  		(*(vu_char *) (CFG_MBAR+0x100037))
+#define MCFGPIO_SETTD  		(*(vu_char *) (CFG_MBAR+0x100038))
+#define MCFGPIO_SETUA  		(*(vu_char *) (CFG_MBAR+0x100039))
+
+#define MCFGPIO_CLRA  		(*(vu_char *) (CFG_MBAR+0x10003C))
+#define MCFGPIO_CLRB  		(*(vu_char *) (CFG_MBAR+0x10003D))
+#define MCFGPIO_CLRC  		(*(vu_char *) (CFG_MBAR+0x10003E))
+#define MCFGPIO_CLRD  		(*(vu_char *) (CFG_MBAR+0x10003F))
+#define MCFGPIO_CLRE  		(*(vu_char *) (CFG_MBAR+0x100040))
+#define MCFGPIO_CLRF  		(*(vu_char *) (CFG_MBAR+0x100041))
+#define MCFGPIO_CLRG  		(*(vu_char *) (CFG_MBAR+0x100042))
+#define MCFGPIO_CLRH  		(*(vu_char *) (CFG_MBAR+0x100043))
+#define MCFGPIO_CLRJ  		(*(vu_char *) (CFG_MBAR+0x100044))
+#define MCFGPIO_CLRDD  		(*(vu_char *) (CFG_MBAR+0x100045))
+#define MCFGPIO_CLREH  		(*(vu_char *) (CFG_MBAR+0x100046))
+#define MCFGPIO_CLREL  		(*(vu_char *) (CFG_MBAR+0x100047))
+#define MCFGPIO_CLRAS  		(*(vu_char *) (CFG_MBAR+0x100048))
+#define MCFGPIO_CLRQS  		(*(vu_char *) (CFG_MBAR+0x100049))
+#define MCFGPIO_CLRSD  		(*(vu_char *) (CFG_MBAR+0x10004A))
+#define MCFGPIO_CLRTC  		(*(vu_char *) (CFG_MBAR+0x10004B))
+#define MCFGPIO_CLRTD  		(*(vu_char *) (CFG_MBAR+0x10004C))
+#define MCFGPIO_CLRUA  		(*(vu_char *) (CFG_MBAR+0x10004D))
+
+#define MCFGPIO_PBCDPAR  	(*(vu_char *) (CFG_MBAR+0x100050))
+#define MCFGPIO_PFPAR  		(*(vu_char *) (CFG_MBAR+0x100051))
+#define MCFGPIO_PEPAR  		(*(vu_short *)(CFG_MBAR+0x100052))
+#define MCFGPIO_PJPAR  		(*(vu_char *) (CFG_MBAR+0x100054))
+#define MCFGPIO_PSDPAR  	(*(vu_char *) (CFG_MBAR+0x100055))
+#define MCFGPIO_PASPAR  	(*(vu_short *)(CFG_MBAR+0x100056))
+#define MCFGPIO_PEHLPAR  	(*(vu_char *) (CFG_MBAR+0x100058))
+#define MCFGPIO_PQSPAR  	(*(vu_char *) (CFG_MBAR+0x100059))
+#define MCFGPIO_PTCPAR  	(*(vu_char *) (CFG_MBAR+0x10005A))
+#define MCFGPIO_PTDPAR  	(*(vu_char *) (CFG_MBAR+0x10005B))
+#define MCFGPIO_PUAPAR  	(*(vu_char *) (CFG_MBAR+0x10005C))
+
+/* Bit level definitions and macros */
+#define MCFGPIO_PORT7			(0x80)
+#define MCFGPIO_PORT6			(0x40)
+#define MCFGPIO_PORT5			(0x20)
+#define MCFGPIO_PORT4			(0x10)
+#define MCFGPIO_PORT3			(0x08)
+#define MCFGPIO_PORT2			(0x04)
+#define MCFGPIO_PORT1			(0x02)
+#define MCFGPIO_PORT0			(0x01)
+#define MCFGPIO_PORT(x)			(0x01<<x)
+
+#define MCFGPIO_DDR7			(0x80)
+#define MCFGPIO_DDR6			(0x40)
+#define MCFGPIO_DDR5			(0x20)
+#define MCFGPIO_DDR4			(0x10)
+#define MCFGPIO_DDR3			(0x08)
+#define MCFGPIO_DDR2			(0x04)
+#define MCFGPIO_DDR1			(0x02)
+#define MCFGPIO_DDR0			(0x01)
+#define MCFGPIO_DDR(x)			(0x01<<x)
+
+#define MCFGPIO_Px7			(0x80)
+#define MCFGPIO_Px6			(0x40)
+#define MCFGPIO_Px5			(0x20)
+#define MCFGPIO_Px4			(0x10)
+#define MCFGPIO_Px3			(0x08)
+#define MCFGPIO_Px2			(0x04)
+#define MCFGPIO_Px1			(0x02)
+#define MCFGPIO_Px0			(0x01)
+#define MCFGPIO_Px(x)			(0x01<<x)
+
+
+#define MCFGPIO_PBCDPAR_PBPA		(0x80)
+#define MCFGPIO_PBCDPAR_PCDPA		(0x40)
+
+#define MCFGPIO_PEPAR_PEPA7		(0x4000)
+#define MCFGPIO_PEPAR_PEPA6		(0x1000)
+#define MCFGPIO_PEPAR_PEPA5		(0x0400)
+#define MCFGPIO_PEPAR_PEPA4		(0x0100)
+#define MCFGPIO_PEPAR_PEPA3		(0x0040)
+#define MCFGPIO_PEPAR_PEPA2		(0x0010)
+#define MCFGPIO_PEPAR_PEPA1(x)		(((x)&0x3)<<2)
+#define MCFGPIO_PEPAR_PEPA0(x)		(((x)&0x3))
+
+#define MCFGPIO_PFPAR_PFPA7		(0x80)
+#define MCFGPIO_PFPAR_PFPA6		(0x40)
+#define MCFGPIO_PFPAR_PFPA5		(0x20)
+
+#define MCFGPIO_PJPAR_PJPA7		(0x80)
+#define MCFGPIO_PJPAR_PJPA6		(0x40)
+#define MCFGPIO_PJPAR_PJPA5		(0x20)
+#define MCFGPIO_PJPAR_PJPA4		(0x10)
+#define MCFGPIO_PJPAR_PJPA3		(0x08)
+#define MCFGPIO_PJPAR_PJPA2		(0x04)
+#define MCFGPIO_PJPAR_PJPA1		(0x02)
+#define MCFGPIO_PJPAR_PJPA0		(0x01)
+#define MCFGPIO_PJPAR_PJPA(x)		(0x01<<x)
+
+#define MCFGPIO_PSDPAR_PSDPA		(0x80)
+
+#define MCFGPIO_PASPAR_PASPA5(x)	(((x)&0x3)<<10)
+#define MCFGPIO_PASPAR_PASPA4(x)	(((x)&0x3)<<8)
+#define MCFGPIO_PASPAR_PASPA3(x)	(((x)&0x3)<<6)
+#define MCFGPIO_PASPAR_PASPA2(x)	(((x)&0x3)<<4)
+#define MCFGPIO_PASPAR_PASPA1(x)	(((x)&0x3)<<2)
+#define MCFGPIO_PASPAR_PASPA0(x)	(((x)&0x3))
+
+#define MCFGPIO_PEHLPAR_PEHPA		(0x80)
+#define MCFGPIO_PEHLPAR_PELPA		(0x40)
+
+#define MCFGPIO_PQSPAR_PQSPA6		(0x40)
+#define MCFGPIO_PQSPAR_PQSPA5		(0x20)
+#define MCFGPIO_PQSPAR_PQSPA4		(0x10)
+#define MCFGPIO_PQSPAR_PQSPA3		(0x08)
+#define MCFGPIO_PQSPAR_PQSPA2		(0x04)
+#define MCFGPIO_PQSPAR_PQSPA1		(0x02)
+#define MCFGPIO_PQSPAR_PQSPA0		(0x01)
+#define MCFGPIO_PQSPAR_PQSPA(x)		(0x01<<x)
+
+#define MCFGPIO_PTCPAR_PTCPA3(x)	(((x)&0x3)<<6)
+#define MCFGPIO_PTCPAR_PTCPA2(x)	(((x)&0x3)<<4)
+#define MCFGPIO_PTCPAR_PTCPA1(x)	(((x)&0x3)<<2)
+#define MCFGPIO_PTCPAR_PTCPA0(x)	(((x)&0x3))
+
+#define MCFGPIO_PTDPAR_PTDPA3(x)	(((x)&0x3)<<6)
+#define MCFGPIO_PTDPAR_PTDPA2(x)	(((x)&0x3)<<4)
+#define MCFGPIO_PTDPAR_PTDPA1(x)	(((x)&0x3)<<2)
+#define MCFGPIO_PTDPAR_PTDPA0(x)	(((x)&0x3))
+
+#define MCFGPIO_PUAPAR_PUAPA3		(0x08)
+#define MCFGPIO_PUAPAR_PUAPA2		(0x04)
+#define MCFGPIO_PUAPAR_PUAPA1		(0x02)
+#define MCFGPIO_PUAPAR_PUAPA0		(0x01)
+
+/* System Conrol Module SCM */
+
+#define MCFSCM_RAMBAR           (*(vu_long *) (CFG_MBAR+0x00000008))
+#define MCFSCM_CRSR		(*(vu_char *) (CFG_MBAR+0x00000010))
+#define MCFSCM_CWCR		(*(vu_char *) (CFG_MBAR+0x00000011))
+#define MCFSCM_LPICR		(*(vu_char *) (CFG_MBAR+0x00000012))
+#define MCFSCM_CWSR		(*(vu_char *) (CFG_MBAR+0x00000013))
+
+#define MCFSCM_MPARK		(*(vu_long *) (CFG_MBAR+0x0000001C))
+#define MCFSCM_MPR		(*(vu_char *) (CFG_MBAR+0x00000020))
+#define MCFSCM_PACR0		(*(vu_char *) (CFG_MBAR+0x00000024))
+#define MCFSCM_PACR1		(*(vu_char *) (CFG_MBAR+0x00000025))
+#define MCFSCM_PACR2		(*(vu_char *) (CFG_MBAR+0x00000026))
+#define MCFSCM_PACR3		(*(vu_char *) (CFG_MBAR+0x00000027))
+#define MCFSCM_PACR4		(*(vu_char *) (CFG_MBAR+0x00000028))
+#define MCFSCM_PACR5		(*(vu_char *) (CFG_MBAR+0x0000002A))
+#define MCFSCM_PACR6		(*(vu_char *) (CFG_MBAR+0x0000002B))
+#define MCFSCM_PACR7		(*(vu_char *) (CFG_MBAR+0x0000002C))
+#define MCFSCM_PACR8		(*(vu_char *) (CFG_MBAR+0x0000002E))
+#define MCFSCM_GPACR0		(*(vu_char *) (CFG_MBAR+0x00000030))
+#define MCFSCM_GPACR1		(*(vu_char *) (CFG_MBAR+0x00000031))
+
+
+#define MCFSCM_CRSR_EXT		(0x80)
+#define MCFSCM_CRSR_CWDR	(0x20)
+#define MCFSCM_RAMBAR_BA(x)     ((x)&0xFFFF0000)
+#define MCFSCM_RAMBAR_BDE       (0x00000200)
+
+/* Reset Controller Module RCM */
+
+#define MCFRESET_RCR		(*(vu_char *) (CFG_MBAR+0x00110000))
+#define MCFRESET_RSR		(*(vu_char *) (CFG_MBAR+0x00110001))
+
+#define MCFRESET_RCR_SOFTRST    (0x80)
+#define MCFRESET_RCR_FRCRSTOUT  (0x40)
+#define MCFRESET_RCR_LVDF       (0x10)
+#define MCFRESET_RCR_LVDIE      (0x08)
+#define MCFRESET_RCR_LVDRE      (0x04)
+#define MCFRESET_RCR_LVDE       (0x01)
+
+#define MCFRESET_RSR_LVD        (0x40)
+#define MCFRESET_RSR_SOFT       (0x20)
+#define MCFRESET_RSR_WDR        (0x10)
+#define MCFRESET_RSR_POR        (0x08)
+#define MCFRESET_RSR_EXT        (0x04)
+#define MCFRESET_RSR_LOC        (0x02)
+#define MCFRESET_RSR_LOL        (0x01)
+#define MCFRESET_RSR_ALL        (0x7F)
+#define MCFRESET_RCR_SOFTRST    (0x80)
+#define MCFRESET_RCR_FRCRSTOUT  (0x40)
+
+/* Chip Configuration Module CCM */
+
+#define MCFCCM_CCR		(*(vu_short *)(CFG_MBAR+0x00110004))
+#define MCFCCM_RCON		(*(vu_short *)(CFG_MBAR+0x00110008))
+#define MCFCCM_CIR		(*(vu_short *)(CFG_MBAR+0x0011000A))
+
+
+/* Bit level definitions and macros */
+#define MCFCCM_CCR_LOAD			(0x8000)
+#define MCFCCM_CCR_MODE(x) 		(((x)&0x0007)<<8)
+#define MCFCCM_CCR_SZEN    		(0x0040)
+#define MCFCCM_CCR_PSTEN   		(0x0020)
+#define MCFCCM_CCR_BME			(0x0008)
+#define MCFCCM_CCR_BMT(x)  		(((x)&0x0007))
+
+#define MCFCCM_CIR_PIN_MASK		(0xFF00)
+#define MCFCCM_CIR_PRN_MASK		(0x00FF)
+
+/* Clock Module */
+
+#define MCFCLOCK_SYNCR          (*(vu_short *)(CFG_MBAR+0x120000))
+#define MCFCLOCK_SYNSR          (*(vu_char *) (CFG_MBAR+0x120002))
+
+#define MCFCLOCK_SYNCR_MFD(x)   (((x)&0x0007)<<12)
+#define MCFCLOCK_SYNCR_RFD(x)   (((x)&0x0007)<<8)
+#define MCFCLOCK_SYNSR_LOCK     0x08
+
+#define MCFSDRAMC_DCR		(*(vu_short *)(CFG_MBAR+0x00000040))
+#define MCFSDRAMC_DACR0		(*(vu_long *) (CFG_MBAR+0x00000048))
+#define MCFSDRAMC_DMR0		(*(vu_long *) (CFG_MBAR+0x0000004c))
+#define MCFSDRAMC_DACR1		(*(vu_long *) (CFG_MBAR+0x00000050))
+#define MCFSDRAMC_DMR1		(*(vu_long *) (CFG_MBAR+0x00000054))
+
+#define MCFSDRAMC_DCR_NAM	(0x2000)
+#define MCFSDRAMC_DCR_COC	(0x1000)
+#define MCFSDRAMC_DCR_IS	(0x0800)
+#define MCFSDRAMC_DCR_RTIM_3	(0x0000)
+#define MCFSDRAMC_DCR_RTIM_6	(0x0200)
+#define MCFSDRAMC_DCR_RTIM_9	(0x0400)
+#define MCFSDRAMC_DCR_RC(x)	((x)&0x01FF)
+
+#define MCFSDRAMC_DACR_BASE(x)	((x)&0xFFFC0000)
+#define MCFSDRAMC_DACR_RE	(0x00008000)
+#define MCFSDRAMC_DACR_CASL(x)	(((x)&0x03)<<12)
+#define MCFSDRAMC_DACR_CBM(x)	(((x)&0x07)<<8)
+#define MCFSDRAMC_DACR_PS_32	(0x00000000)
+#define MCFSDRAMC_DACR_PS_16	(0x00000020)
+#define MCFSDRAMC_DACR_PS_8	(0x00000010)
+#define MCFSDRAMC_DACR_IP	(0x00000008)
+#define MCFSDRAMC_DACR_IMRS	(0x00000040)
+
+#define MCFSDRAMC_DMR_BAM_16M	(0x00FC0000)
+#define MCFSDRAMC_DMR_WP        (0x00000100)
+#define MCFSDRAMC_DMR_CI        (0x00000040)
+#define MCFSDRAMC_DMR_AM        (0x00000020)
+#define MCFSDRAMC_DMR_SC        (0x00000010)
+#define MCFSDRAMC_DMR_SD        (0x00000008)
+#define MCFSDRAMC_DMR_UC        (0x00000004)
+#define MCFSDRAMC_DMR_UD        (0x00000002)
+#define MCFSDRAMC_DMR_V         (0x00000001)
+
+#define MCFWTM_WCR              (*(vu_short *)(CFG_MBAR+0x00140000))
+#define MCFWTM_WMR              (*(vu_short *)(CFG_MBAR+0x00140002))
+#define MCFWTM_WCNTR            (*(vu_short *)(CFG_MBAR+0x00140004))
+#define MCFWTM_WSR              (*(vu_short *)(CFG_MBAR+0x00140006))
+
+/*  Chip SELECT Module CSM */
+#define MCFCSM_CSAR0		(*(vu_short *)(CFG_MBAR+0x00000080))
+#define MCFCSM_CSMR0		(*(vu_long *) (CFG_MBAR+0x00000084))
+#define MCFCSM_CSCR0		(*(vu_short *)(CFG_MBAR+0x0000008a))
+#define MCFCSM_CSAR1		(*(vu_short *)(CFG_MBAR+0x0000008C))
+#define MCFCSM_CSMR1		(*(vu_long *) (CFG_MBAR+0x00000090))
+#define MCFCSM_CSCR1		(*(vu_short *)(CFG_MBAR+0x00000096))
+#define MCFCSM_CSAR2		(*(vu_short *)(CFG_MBAR+0x00000098))
+#define MCFCSM_CSMR2		(*(vu_long *) (CFG_MBAR+0x0000009C))
+#define MCFCSM_CSCR2		(*(vu_short *)(CFG_MBAR+0x000000A2))
+#define MCFCSM_CSAR3		(*(vu_short *)(CFG_MBAR+0x000000A4))
+#define MCFCSM_CSMR3		(*(vu_long *) (CFG_MBAR+0x000000A8))
+#define MCFCSM_CSCR3		(*(vu_short *)(CFG_MBAR+0x000000AE))
+
+#define MCFCSM_CSMR_BAM(x)	((x) & 0xFFFF0000)
+#define MCFCSM_CSMR_WP		(1<<8)
+#define MCFCSM_CSMR_V		(0x01)
+#define MCFCSM_CSCR_WS(x)	((x & 0x0F)<<10)
+#define MCFCSM_CSCR_AA		(0x0100)
+#define MCFCSM_CSCR_PS_32	(0x0000)
+#define MCFCSM_CSCR_PS_8	(0x0040)
+#define MCFCSM_CSCR_PS_16	(0x0080)
+
+/*********************************************************************
+*
+* General Purpose Timer (GPT) Module
+*
+*********************************************************************/
+
+#define MCFGPTA_GPTIOS		(*(vu_char *)(CFG_MBAR+0x1A0000))
+#define MCFGPTA_GPTCFORC	(*(vu_char *)(CFG_MBAR+0x1A0001))
+#define MCFGPTA_GPTOC3M		(*(vu_char *)(CFG_MBAR+0x1A0002))
+#define MCFGPTA_GPTOC3D		(*(vu_char *)(CFG_MBAR+0x1A0003))
+#define MCFGPTA_GPTCNT		(*(vu_short *)(CFG_MBAR+0x1A0004))
+#define MCFGPTA_GPTSCR1		(*(vu_char *)(CFG_MBAR+0x1A0006))
+#define MCFGPTA_GPTTOV		(*(vu_char *)(CFG_MBAR+0x1A0008))
+#define MCFGPTA_GPTCTL1		(*(vu_char *)(CFG_MBAR+0x1A0009))
+#define MCFGPTA_GPTCTL2		(*(vu_char *)(CFG_MBAR+0x1A000B))
+#define MCFGPTA_GPTIE		(*(vu_char *)(CFG_MBAR+0x1A000C))
+#define MCFGPTA_GPTSCR2		(*(vu_char *)(CFG_MBAR+0x1A000D))
+#define MCFGPTA_GPTFLG1		(*(vu_char *)(CFG_MBAR+0x1A000E))
+#define MCFGPTA_GPTFLG2		(*(vu_char *)(CFG_MBAR+0x1A000F))
+#define MCFGPTA_GPTC0		(*(vu_short *)(CFG_MBAR+0x1A0010))
+#define MCFGPTA_GPTC1		(*(vu_short *)(CFG_MBAR+0x1A0012))
+#define MCFGPTA_GPTC2		(*(vu_short *)(CFG_MBAR+0x1A0014))
+#define MCFGPTA_GPTC3		(*(vu_short *)(CFG_MBAR+0x1A0016))
+#define MCFGPTA_GPTPACTL	(*(vu_char *)(CFG_MBAR+0x1A0018))
+#define MCFGPTA_GPTPAFLG	(*(vu_char *)(CFG_MBAR+0x1A0019))
+#define MCFGPTA_GPTPACNT	(*(vu_short *)(CFG_MBAR+0x1A001A))
+#define MCFGPTA_GPTPORT		(*(vu_char *)(CFG_MBAR+0x1A001D))
+#define MCFGPTA_GPTDDR		(*(vu_char *)(CFG_MBAR+0x1A001E))
+
+
+#define MCFGPTB_GPTIOS		(*(vu_char *)(CFG_MBAR+0x1B0000))
+#define MCFGPTB_GPTCFORC	(*(vu_char *)(CFG_MBAR+0x1B0001))
+#define MCFGPTB_GPTOC3M		(*(vu_char *)(CFG_MBAR+0x1B0002))
+#define MCFGPTB_GPTOC3D		(*(vu_char *)(CFG_MBAR+0x1B0003))
+#define MCFGPTB_GPTCNT		(*(vu_short *)(CFG_MBAR+0x1B0004))
+#define MCFGPTB_GPTSCR1		(*(vu_char *)(CFG_MBAR+0x1B0006))
+#define MCFGPTB_GPTTOV		(*(vu_char *)(CFG_MBAR+0x1B0008))
+#define MCFGPTB_GPTCTL1		(*(vu_char *)(CFG_MBAR+0x1B0009))
+#define MCFGPTB_GPTCTL2		(*(vu_char *)(CFG_MBAR+0x1B000B))
+#define MCFGPTB_GPTIE		(*(vu_char *)(CFG_MBAR+0x1B000C))
+#define MCFGPTB_GPTSCR2		(*(vu_char *)(CFG_MBAR+0x1B000D))
+#define MCFGPTB_GPTFLG1		(*(vu_char *)(CFG_MBAR+0x1B000E))
+#define MCFGPTB_GPTFLG2		(*(vu_char *)(CFG_MBAR+0x1B000F))
+#define MCFGPTB_GPTC0		(*(vu_short *)(CFG_MBAR+0x1B0010))
+#define MCFGPTB_GPTC1		(*(vu_short *)(CFG_MBAR+0x1B0012))
+#define MCFGPTB_GPTC2		(*(vu_short *)(CFG_MBAR+0x1B0014))
+#define MCFGPTB_GPTC3		(*(vu_short *)(CFG_MBAR+0x1B0016))
+#define MCFGPTB_GPTPACTL	(*(vu_char *)(CFG_MBAR+0x1B0018))
+#define MCFGPTB_GPTPAFLG	(*(vu_char *)(CFG_MBAR+0x1B0019))
+#define MCFGPTB_GPTPACNT	(*(vu_short *)(CFG_MBAR+0x1B001A))
+#define MCFGPTB_GPTPORT		(*(vu_char *)(CFG_MBAR+0x1B001D))
+#define MCFGPTB_GPTDDR		(*(vu_char *)(CFG_MBAR+0x1B001E))
+
+/* Bit level definitions and macros */
+#define MCFGPT_GPTIOS_IOS3		(0x08)
+#define MCFGPT_GPTIOS_IOS2		(0x04)
+#define MCFGPT_GPTIOS_IOS1		(0x02)
+#define MCFGPT_GPTIOS_IOS0		(0x01)
+
+#define MCFGPT_GPTCFORC_FOC3		(0x08)
+#define MCFGPT_GPTCFORC_FOC2		(0x04)
+#define MCFGPT_GPTCFORC_FOC1		(0x02)
+#define MCFGPT_GPTCFORC_FOC0		(0x01)
+
+#define MCFGPT_GPTOC3M_OC3M3		(0x08)
+#define MCFGPT_GPTOC3M_OC3M2		(0x04)
+#define MCFGPT_GPTOC3M_OC3M1		(0x02)
+#define MCFGPT_GPTOC3M_OC3M0		(0x01)
+
+#define MCFGPT_GPTOC3M_OC3D(x)		(((x)&0x04))
+
+#define MCFGPT_GPTSCR1_GPTEN		(0x80)
+#define MCFGPT_GPTSCR1_TFFCA		(0x10)
+
+#define MCFGPT_GPTTOV3			(0x08)
+#define MCFGPT_GPTTOV2			(0x04)
+#define MCFGPT_GPTTOV1			(0x02)
+#define MCFGPT_GPTTOV0			(0x01)
+
+#define MCFGPT_GPTCTL_OMOL3(x)		(((x)&0x03)<<6)
+#define MCFGPT_GPTCTL_OMOL2(x)		(((x)&0x03)<<4)
+#define MCFGPT_GPTCTL_OMOL1(x)		(((x)&0x03)<<2)
+#define MCFGPT_GPTCTL_OMOL0(x)		(((x)&0x03))
+
+#define MCFGPT_GPTCTL2_EDG3(x)		(((x)&0x03)<<6)
+#define MCFGPT_GPTCTL2_EDG2(x)		(((x)&0x03)<<4)
+#define MCFGPT_GPTCTL2_EDG1(x)		(((x)&0x03)<<2)
+#define MCFGPT_GPTCTL2_EDG0(x)		(((x)&0x03))
+
+#define MCFGPT_GPTIE_C3I		(0x08)
+#define MCFGPT_GPTIE_C2I		(0x04)
+#define MCFGPT_GPTIE_C1I		(0x02)
+#define MCFGPT_GPTIE_C0I		(0x01)
+
+#define MCFGPT_GPTSCR2_TOI 		(0x80)
+#define MCFGPT_GPTSCR2_PUPT		(0x20)
+#define MCFGPT_GPTSCR2_RDPT		(0x10)
+#define MCFGPT_GPTSCR2_TCRE		(0x08)
+#define MCFGPT_GPTSCR2_PR(x)		(((x)&0x07))
+
+#define MCFGPT_GPTFLG1_C3F		(0x08)
+#define MCFGPT_GPTFLG1_C2F		(0x04)
+#define MCFGPT_GPTFLG1_C1F		(0x02)
+#define MCFGPT_GPTFLG1_C0F		(0x01)
+
+#define MCFGPT_GPTFLG2_TOF		(0x80)
+#define MCFGPT_GPTFLG2_C3F		(0x08)
+#define MCFGPT_GPTFLG2_C2F		(0x04)
+#define MCFGPT_GPTFLG2_C1F		(0x02)
+#define MCFGPT_GPTFLG2_C0F		(0x01)
+
+#define MCFGPT_GPTPACTL_PAE		(0x40)
+#define MCFGPT_GPTPACTL_PAMOD		(0x20)
+#define MCFGPT_GPTPACTL_PEDGE		(0x10)
+#define MCFGPT_GPTPACTL_CLK_PACLK	(0x04)
+#define MCFGPT_GPTPACTL_CLK_PACLK256	(0x08)
+#define MCFGPT_GPTPACTL_CLK_PACLK65536	(0x0C)
+#define MCFGPT_GPTPACTL_CLK(x)		(((x)&0x03)<<2)
+#define MCFGPT_GPTPACTL_PAOVI		(0x02)
+#define MCFGPT_GPTPACTL_PAI		(0x01)
+
+#define MCFGPT_GPTPAFLG_PAOVF		(0x02)
+#define MCFGPT_GPTPAFLG_PAIF		(0x01)
+
+#define MCFGPT_GPTPORT_PORTT3		(0x08)
+#define MCFGPT_GPTPORT_PORTT2		(0x04)
+#define MCFGPT_GPTPORT_PORTT1		(0x02)
+#define MCFGPT_GPTPORT_PORTT0		(0x01)
+
+#define MCFGPT_GPTDDR_DDRT3		(0x08)
+#define MCFGPT_GPTDDR_DDRT2		(0x04)
+#define MCFGPT_GPTDDR_DDRT1		(0x02)
+#define MCFGPT_GPTDDR_DDRT0		(0x01)
+
+/* Coldfire Flash Module CFM */
+
+#define MCFCFM_MCR			(*(vu_short *)(CFG_MBAR+0x1D0000))
+#define MCFCFM_MCR_LOCK			(0x0400)
+#define MCFCFM_MCR_PVIE			(0x0200)
+#define MCFCFM_MCR_AEIE			(0x0100)
+#define MCFCFM_MCR_CBEIE		(0x0080)
+#define MCFCFM_MCR_CCIE			(0x0040)
+#define MCFCFM_MCR_KEYACC		(0x0020)
+
+#define MCFCFM_CLKD			(*(vu_char *)(CFG_MBAR+0x1D0002))
+
+#define MCFCFM_SEC			(*(vu_long*) (CFG_MBAR+0x1D0008))
+#define MCFCFM_SEC_KEYEN		(0x80000000)
+#define MCFCFM_SEC_SECSTAT		(0x40000000)
+
+#define MCFCFM_PROT			(*(vu_long*) (CFG_MBAR+0x1D0010))
+#define MCFCFM_SACC			(*(vu_long*) (CFG_MBAR+0x1D0014))
+#define MCFCFM_DACC			(*(vu_long*) (CFG_MBAR+0x1D0018))
+#define MCFCFM_USTAT			(*(vu_char*) (CFG_MBAR+0x1D0020))
+#define MCFCFM_USTAT_CBEIF		0x80
+#define MCFCFM_USTAT_CCIF		0x40
+#define MCFCFM_USTAT_PVIOL		0x20
+#define MCFCFM_USTAT_ACCERR		0x10
+#define MCFCFM_USTAT_BLANK		0x04
 
+#define MCFCFM_CMD			(*(vu_char*) (CFG_MBAR+0x1D0024))
+#define MCFCFM_CMD_ERSVER		0x05
+#define MCFCFM_CMD_PGERSVER		0x06
+#define MCFCFM_CMD_PGM			0x20
+#define MCFCFM_CMD_PGERS		0x40
+#define MCFCFM_CMD_MASERS		0x41
 
 /****************************************************************************/
 #endif	/* m5282_h */
diff --git a/include/configs/EB+MCF-EV123.h b/include/configs/EB+MCF-EV123.h
new file mode 100644
index 0000000..f49a4b7
--- /dev/null
+++ b/include/configs/EB+MCF-EV123.h
@@ -0,0 +1,223 @@
+/*
+ * Configuation settings for the BuS EB+MCF-EV123 boards.
+ *
+ * (C) Copyright 2005 BuS Elektronik GmbH & Co.KG <esw@bus-elektonik.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _CONFIG_EB_MCF_EV123_H_
+#define _CONFIG_EB_MCF_EV123_H_
+
+#define  CONFIG_EB_MCF_EV123
+
+#undef DEBUG
+#undef CFG_HALT_BEFOR_RAM_JUMP
+#undef ET_DEBUG
+  
+/*
+ * High Level Configuration Options (easy to change)
+ */
+
+#define	CONFIG_MCF52x2			/* define processor family */
+#define CONFIG_M5282			/* define processor type */
+
+#define CONFIG_MISC_INIT_R
+
+#define FEC_ENET
+#define CONFIG_ETHADDR 00:CF:52:82:EB:01
+
+#define CONFIG_BAUDRATE 9600
+#define CFG_BAUDRATE_TABLE { 9600 , 19200 , 38400 , 57600, 115200 }
+
+#undef	CONFIG_MONITOR_IS_IN_RAM	/* define if monitor is started from a pre-loader */
+
+#define CONFIG_BOOTCOMMAND "printenv"
+
+/* Configuration for environment
+ * Environment is embedded in u-boot in the second sector of the flash
+ */
+#ifndef CONFIG_MONITOR_IS_IN_RAM
+#define CFG_ENV_ADDR		0xF003C000	/* End of 256K */
+#define CFG_ENV_SECT_SIZE	0x4000
+#define CFG_ENV_IS_IN_FLASH	1
+/*
+#define CFG_ENV_IS_EMBEDDED	1
+#define CFG_ENV_ADDR_REDUND		0xF0018000
+#define CFG_ENV_SECT_SIZE_REDUND	0x4000
+*/
+#else
+#define CFG_ENV_ADDR		0xFFE04000
+#define CFG_ENV_SECT_SIZE	0x2000
+#define CFG_ENV_IS_IN_FLASH	1
+#endif
+
+//#define CONFIG_COMMANDS  ( CONFIG_CMD_DFL & ~(CFG_CMD_LOADS | CFG_CMD_LOADB) )
+#define CONFIG_COMMANDS  ( CONFIG_CMD_DFL & ~(CFG_CMD_LOADB))
+
+/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
+#include <cmd_confdefs.h>
+
+#define CONFIG_BOOTDELAY	5
+#define CFG_PROMPT		"\nEV123 U-Boot> "
+#define	CFG_LONGHELP				/* undef to save memory		*/
+
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define	CFG_CBSIZE		1024		/* Console I/O Buffer Size	*/
+#else
+#define	CFG_CBSIZE		256		/* Console I/O Buffer Size	*/
+#endif
+#define	CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define	CFG_MAXARGS		16		/* max number of command args	*/
+#define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+
+#define CFG_LOAD_ADDR		0x20000
+
+#define CFG_MEMTEST_START	0x100000
+#define CFG_MEMTEST_END		0x400000
+/*#define CFG_DRAM_TEST		1 */
+#undef CFG_DRAM_TEST
+
+/* Clock and PLL Configuration */
+#define CFG_HZ			10000000 
+#define	CFG_CLK			58982400       /* 9,8304MHz * 6 */
+
+/* PLL Configuration: Ext Clock * 6 (see table 9-4 of MCF user manual) */
+
+#define CFG_MFD			0x01	/* PLL Multiplication Factor Devider */	
+#define CFG_RFD			0x00	/* PLL Reduce Frecuency Devider */
+
+/*
+ * Low Level Configuration Settings
+ * (address mappings, register initial values, etc.)
+ * You should know what you are doing if you make changes here.
+ */
+#define	CFG_MBAR		0x40000000
+
+#define	CFG_DISCOVER_PHY
+/* #define	CFG_ENET_BD_BASE	0x380000 */
+
+/*-----------------------------------------------------------------------
+ * Definitions for initial stack pointer and data area (in DPRAM)
+ */
+#define CFG_INIT_RAM_ADDR       0x20000000
+#define CFG_INIT_RAM_END	0x10000		/* End of used area in internal SRAM	*/
+#define CFG_GBL_DATA_SIZE	64      	/* size in bytes reserved for initial data */
+#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+
+/*-----------------------------------------------------------------------
+ * Start addresses for the final memory configuration
+ * (Set up by the startup code)
+ * Please note that CFG_SDRAM_BASE _must_ start at 0
+ */
+#define CFG_SDRAM_BASE1		0x00000000
+#define	CFG_SDRAM_SIZE1		16		/* SDRAM size in MB */
+
+/*
+#define CFG_SDRAM_BASE0		CFG_SDRAM_BASE1+CFG_SDRAM_SIZE1*1024*1024
+#define	CFG_SDRAM_SIZE0		16	*/	/* SDRAM size in MB */
+
+#define CFG_SDRAM_BASE		CFG_SDRAM_BASE1
+#define	CFG_SDRAM_SIZE		CFG_SDRAM_SIZE1
+
+#define CFG_FLASH_BASE		0xFFE00000
+#define	CFG_INT_FLASH_BASE	0xF0000000
+
+/* If M5282 port is fully implemented the monitor base will be behind
+ * the vector table. */
+#if (TEXT_BASE !=  CFG_INT_FLASH_BASE)
+#define CFG_MONITOR_BASE	(TEXT_BASE + 0x400) 
+#else
+#define CFG_MONITOR_BASE	(TEXT_BASE + 0x418) /* 24 Byte for CFM-Config */
+#endif
+
+#define CFG_MONITOR_LEN		0x20000
+#define CFG_MALLOC_LEN		(256 << 10)
+#define CFG_BOOTPARAMS_LEN	64*1024
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization ??
+ */
+#define	CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux	*/
+
+/*-----------------------------------------------------------------------
+ * FLASH organization
+ */
+#define	CFG_MAX_FLASH_SECT	35
+#define	CFG_MAX_FLASH_BANKS	2
+#define	CFG_FLASH_ERASE_TOUT	10000000
+#define	CFG_FLASH_PROTECTION
+
+/*-----------------------------------------------------------------------
+ * Cache Configuration
+ */
+#define CFG_CACHELINE_SIZE	16
+
+/*-----------------------------------------------------------------------
+ * Memory bank definitions
+ */
+
+#define CFG_CS0_BASE		CFG_FLASH_BASE
+#define CFG_CS0_SIZE		2*1024*1024
+#define CFG_CS0_WIDTH		16
+#define CFG_CS0_RO 		0
+#define CFG_CS0_WS		6
+
+#define CFG_CS3_BASE		0xE0000000
+#define CFG_CS3_SIZE		1*1024*1024
+#define CFG_CS3_WIDTH		16
+#define CFG_CS3_RO 		0
+#define CFG_CS3_WS		6
+
+/*-----------------------------------------------------------------------
+ * Port configuration
+ */
+#define CFG_PACNT		0x0000000	/* Port A D[31:24] */
+#define CFG_PADDR		0x0000000
+#define CFG_PADAT		0x0000000
+
+#define CFG_PBCNT		0x0000000	/* Port B D[23:16] */
+#define CFG_PBDDR		0x0000000
+#define CFG_PBDAT		0x0000000
+
+#define CFG_PCCNT		0x0000000	/* Port C D[15:08] */
+#define CFG_PCDDR		0x0000000
+#define CFG_PCDAT		0x0000000
+
+#define CFG_PDCNT		0x0000000	/* Port D D[07:00] */
+#define CFG_PCDDR		0x0000000
+#define CFG_PCDAT		0x0000000
+
+#define CFG_PEHLPAR		0xC0
+#define CFG_PUAPAR		0x0F		/* UA0..UA3 = Uart 0 +1 */
+#define CFG_DDRUA		0x05
+#define CFG_PJPAR 		0xFF;
+
+/*-----------------------------------------------------------------------
+ * CCM configuration
+ */
+
+#define	CFG_CCM_SIZ		0
+
+/*---------------------------------------------------------------------*/
+#endif	/* _CONFIG_M5282EVB_H */
+/*---------------------------------------------------------------------*/