summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorTom Rini <trini@ti.com>2014-01-06 14:07:08 -0500
committerTom Rini <trini@ti.com>2014-01-06 14:07:08 -0500
commite7be18225fbea76d1f0034b224f0d1e60f07cfcf (patch)
tree6da1280e9e98b360a06177184105278c4f4c9e46
parent895ec893a9df56b915b6ca1fa2ceba8fad7faf3d (diff)
parent8c618dd66adfab736b88a86f51c057b019988a90 (diff)
downloadu-boot-imx-e7be18225fbea76d1f0034b224f0d1e60f07cfcf.zip
u-boot-imx-e7be18225fbea76d1f0034b224f0d1e60f07cfcf.tar.gz
u-boot-imx-e7be18225fbea76d1f0034b224f0d1e60f07cfcf.tar.bz2
Merge branch 'master' of git://git.denx.de/u-boot-mpc85xx
-rw-r--r--README8
-rw-r--r--arch/powerpc/cpu/mpc85xx/speed.c25
-rw-r--r--arch/powerpc/include/asm/config_mpc85xx.h3
-rw-r--r--arch/powerpc/include/asm/immap_85xx.h3
-rw-r--r--board/freescale/b4860qds/b4_rcw.cfg2
-rw-r--r--board/freescale/bsc9131rdb/tlb.c2
-rw-r--r--board/freescale/bsc9132qds/tlb.c2
-rw-r--r--board/freescale/p1010rdb/tlb.c2
-rw-r--r--board/freescale/t1040qds/t1040_pbi.cfg2
-rw-r--r--board/freescale/t1040qds/t1040qds.c5
-rw-r--r--boards.cfg1
-rw-r--r--include/configs/B4860QDS.h2
-rw-r--r--include/configs/BSC9131RDB.h2
-rw-r--r--include/configs/BSC9132QDS.h2
-rw-r--r--include/configs/CMS700.h3
-rw-r--r--include/configs/P1010RDB.h2
-rw-r--r--include/configs/P1022DS.h2
-rw-r--r--include/configs/T1040QDS.h3
18 files changed, 59 insertions, 12 deletions
diff --git a/README b/README
index 895fef3..a0646c3 100644
--- a/README
+++ b/README
@@ -423,6 +423,11 @@ The following options need to be configured:
CONFIG_SYS_FSL_DSP_CCSRBAR_DEFAULT
This value denotes start offset of DSP CCSR space.
+ CONFIG_SYS_FSL_SINGLE_SOURCE_CLK
+ Single Source Clock is clocking mode present in some of FSL SoC's.
+ In this mode, a single differential clock is used to supply
+ clocks to the sysclock, ddrclock and usbclock.
+
- Generic CPU options:
CONFIG_SYS_BIG_ENDIAN, CONFIG_SYS_LITTLE_ENDIAN
@@ -3267,6 +3272,9 @@ FIT uImage format:
Defines the size and behavior of the NAND that SPL uses
to read U-Boot
+ CONFIG_SPL_NAND_BOOT
+ Add support NAND boot
+
CONFIG_SYS_NAND_U_BOOT_OFFS
Location in NAND to read U-Boot from
diff --git a/arch/powerpc/cpu/mpc85xx/speed.c b/arch/powerpc/cpu/mpc85xx/speed.c
index 7c7467f..35867df 100644
--- a/arch/powerpc/cpu/mpc85xx/speed.c
+++ b/arch/powerpc/cpu/mpc85xx/speed.c
@@ -74,12 +74,33 @@ void get_sys_info(sys_info_t *sys_info)
uint ratio[CONFIG_SYS_FSL_NUM_CC_PLLS];
unsigned long sysclk = CONFIG_SYS_CLK_FREQ;
uint mem_pll_rat;
+#ifdef CONFIG_SYS_FSL_SINGLE_SOURCE_CLK
+ uint single_src;
+#endif
sys_info->freq_systembus = sysclk;
+#ifdef CONFIG_SYS_FSL_SINGLE_SOURCE_CLK
+ /*
+ * DDR_REFCLK_SEL rcw bit is used to determine if DDR PLLS
+ * are driven by separate DDR Refclock or single source
+ * differential clock.
+ */
+ single_src = (in_be32(&gur->rcwsr[5]) >>
+ FSL_CORENET2_RCWSR5_DDR_REFCLK_SEL_SHIFT) &
+ FSL_CORENET2_RCWSR5_DDR_REFCLK_SEL_MASK;
+ /*
+ * For single source clocking, both ddrclock and syclock
+ * are driven by differential sysclock.
+ */
+ if (single_src == FSL_CORENET2_RCWSR5_DDR_REFCLK_SINGLE_CLK) {
+ printf("Single Source Clock Configuration\n");
+ sys_info->freq_ddrbus = CONFIG_SYS_CLK_FREQ;
+ } else
+#endif
#ifdef CONFIG_DDR_CLK_FREQ
- sys_info->freq_ddrbus = CONFIG_DDR_CLK_FREQ;
+ sys_info->freq_ddrbus = CONFIG_DDR_CLK_FREQ;
#else
- sys_info->freq_ddrbus = sysclk;
+ sys_info->freq_ddrbus = sysclk;
#endif
sys_info->freq_systembus *= (in_be32(&gur->rcwsr[0]) >> 25) & 0x1f;
diff --git a/arch/powerpc/include/asm/config_mpc85xx.h b/arch/powerpc/include/asm/config_mpc85xx.h
index 244ccbf..54ce2f0 100644
--- a/arch/powerpc/include/asm/config_mpc85xx.h
+++ b/arch/powerpc/include/asm/config_mpc85xx.h
@@ -711,6 +711,7 @@ defined(CONFIG_PPC_T1020) || defined(CONFIG_PPC_T1022)
#define CONFIG_FM_PLAT_CLK_DIV 1
#define CONFIG_SYS_FM1_CLK CONFIG_FM_PLAT_CLK_DIV
#define CONFIG_SYS_FM_MURAM_SIZE 0x30000
+#define CONFIG_SYS_FSL_SINGLE_SOURCE_CLK
#define CONFIG_SYS_FSL_TBCLK_DIV 16
#define CONFIG_SYS_FSL_PCIE_COMPAT "fsl,qoriq-pcie-v2.4"
#define CONFIG_SYS_FSL_USB1_PHY_ENABLE
@@ -745,7 +746,7 @@ defined(CONFIG_PPC_T1020) || defined(CONFIG_PPC_T1022)
#define CONFIG_SYS_NUM_FM1_DTSEC 6
#define CONFIG_SYS_NUM_FM1_10GEC 2
#endif
-#define CONFIG_SYS_FSL_NUM_USB_CTRLS 2
+#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
#define CONFIG_NUM_DDR_CONTROLLERS 1
#define CONFIG_PME_PLAT_CLK_DIV 1
#define CONFIG_SYS_PME_CLK CONFIG_PME_PLAT_CLK_DIV
diff --git a/arch/powerpc/include/asm/immap_85xx.h b/arch/powerpc/include/asm/immap_85xx.h
index 672e8c6..68c3c82 100644
--- a/arch/powerpc/include/asm/immap_85xx.h
+++ b/arch/powerpc/include/asm/immap_85xx.h
@@ -1774,6 +1774,9 @@ defined(CONFIG_PPC_T1020) || defined(CONFIG_PPC_T1022)
#define FSL_CORENET2_RCWSR5_SRDS_PLL_PD_S3_PLL2 0x00040000
#define FSL_CORENET2_RCWSR5_SRDS_PLL_PD_S4_PLL1 0x00020000
#define FSL_CORENET2_RCWSR5_SRDS_PLL_PD_S4_PLL2 0x00010000
+#define FSL_CORENET2_RCWSR5_DDR_REFCLK_SEL_SHIFT 4
+#define FSL_CORENET2_RCWSR5_DDR_REFCLK_SEL_MASK 0x00000011
+#define FSL_CORENET2_RCWSR5_DDR_REFCLK_SINGLE_CLK 1
#else /* CONFIG_SYS_FSL_QORIQ_CHASSIS2 */
#define FSL_CORENET_RCWSR0_MEM_PLL_RAT_SHIFT 17
diff --git a/board/freescale/b4860qds/b4_rcw.cfg b/board/freescale/b4860qds/b4_rcw.cfg
index 577dabf..597d391 100644
--- a/board/freescale/b4860qds/b4_rcw.cfg
+++ b/board/freescale/b4860qds/b4_rcw.cfg
@@ -2,6 +2,6 @@
aa55aa55 010e0100
# serdes protocol 0x2A_0x98
140e0018 0f001218 00000000 00000000
-54980000 9000a000 f8025000 a9000000
+54980000 9000a000 e8104000 a9000000
01000000 00000000 00000000 0001b1f8
00000000 14000020 00000000 00000011
diff --git a/board/freescale/bsc9131rdb/tlb.c b/board/freescale/bsc9131rdb/tlb.c
index 669fe8a..c8ecf5d 100644
--- a/board/freescale/bsc9131rdb/tlb.c
+++ b/board/freescale/bsc9131rdb/tlb.c
@@ -30,7 +30,7 @@ struct fsl_e_tlb_entry tlb_table[] = {
SET_TLB_ENTRY(1, 0xfffff000, 0xfffff000,
MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
0, 0, BOOKE_PAGESZ_4K, 1),
-#ifdef CONFIG_SPL_NAND_MINIMAL
+#ifdef CONFIG_SPL_NAND_BOOT
SET_TLB_ENTRY(1, 0xffffe000, 0xffffe000,
MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
0, 10, BOOKE_PAGESZ_4K, 1),
diff --git a/board/freescale/bsc9132qds/tlb.c b/board/freescale/bsc9132qds/tlb.c
index 02655e9..07febc2 100644
--- a/board/freescale/bsc9132qds/tlb.c
+++ b/board/freescale/bsc9132qds/tlb.c
@@ -30,7 +30,7 @@ struct fsl_e_tlb_entry tlb_table[] = {
SET_TLB_ENTRY(1, 0xfffff000, 0xfffff000,
MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
0, 0, BOOKE_PAGESZ_4K, 1),
-#ifdef CONFIG_SPL_NAND_MINIMAL
+#ifdef CONFIG_SPL_NAND_BOOT
SET_TLB_ENTRY(1, 0xffffe000, 0xffffe000,
MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
0, 10, BOOKE_PAGESZ_4K, 1),
diff --git a/board/freescale/p1010rdb/tlb.c b/board/freescale/p1010rdb/tlb.c
index a7af0f6..a3d36b3 100644
--- a/board/freescale/p1010rdb/tlb.c
+++ b/board/freescale/p1010rdb/tlb.c
@@ -30,7 +30,7 @@ struct fsl_e_tlb_entry tlb_table[] = {
SET_TLB_ENTRY(1, 0xfffff000, 0xfffff000,
MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
0, 0, BOOKE_PAGESZ_4K, 1),
-#ifdef CONFIG_SPL_NAND_MINIMAL
+#ifdef CONFIG_SPL_NAND_BOOT
SET_TLB_ENTRY(1, 0xffffe000, 0xffffe000,
MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
0, 10, BOOKE_PAGESZ_4K, 1),
diff --git a/board/freescale/t1040qds/t1040_pbi.cfg b/board/freescale/t1040qds/t1040_pbi.cfg
index 624398a..10b1a6d 100644
--- a/board/freescale/t1040qds/t1040_pbi.cfg
+++ b/board/freescale/t1040qds/t1040_pbi.cfg
@@ -3,7 +3,7 @@
09010000 00200400
09138000 00000000
091380c0 00000100
-#Configure CPC1 as 512KB SRAM
+#Configure CPC1 as 256KB SRAM
09010100 00000000
09010104 fffc0007
09010f00 08000000
diff --git a/board/freescale/t1040qds/t1040qds.c b/board/freescale/t1040qds/t1040qds.c
index 2aa176c..de3ea5c 100644
--- a/board/freescale/t1040qds/t1040qds.c
+++ b/board/freescale/t1040qds/t1040qds.c
@@ -239,3 +239,8 @@ void qixis_dump_switch(void)
printf("SW%d = (0x%02x)\n", i, QIXIS_READ(cms[1]));
}
}
+
+int board_need_mem_reset(void)
+{
+ return 1;
+}
diff --git a/boards.cfg b/boards.cfg
index 8951bb1..18faf09 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -965,6 +965,7 @@ Active powerpc mpc85xx - freescale t4qds
Active powerpc mpc85xx - freescale t4qds T4160QDS_SPIFLASH T4240QDS:PPC_T4160,RAMBOOT_PBL,SPIFLASH,SYS_TEXT_BASE=0xFFF80000 -
Active powerpc mpc85xx - freescale t4qds T4240EMU T4240EMU:PPC_T4240 York Sun <yorksun@freescale.com>
Active powerpc mpc85xx - freescale t4qds T4240QDS T4240QDS:PPC_T4240 -
+Active powerpc mpc85xx - freescale t4qds T4240QDS_NAND T4240QDS:PPC_T4240,RAMBOOT_PBL,NAND,SYS_TEXT_BASE=0xFFF80000 -
Active powerpc mpc85xx - freescale t4qds T4240QDS_SDCARD T4240QDS:PPC_T4240,RAMBOOT_PBL,SDCARD,SYS_TEXT_BASE=0xFFF80000 -
Active powerpc mpc85xx - freescale t4qds T4240QDS_SPIFLASH T4240QDS:PPC_T4240,RAMBOOT_PBL,SPIFLASH,SYS_TEXT_BASE=0xFFF80000 -
Active powerpc mpc85xx - freescale t4qds T4240QDS_SRIO_PCIE_BOOT T4240QDS:PPC_T4240,SRIO_PCIE_BOOT_SLAVE,SYS_TEXT_BASE=0xFFF80000 -
diff --git a/include/configs/B4860QDS.h b/include/configs/B4860QDS.h
index 3c6cd61..c182158 100644
--- a/include/configs/B4860QDS.h
+++ b/include/configs/B4860QDS.h
@@ -289,6 +289,8 @@ unsigned long get_board_ddr_clk(void);
/* NAND Flash on IFC */
#define CONFIG_NAND_FSL_IFC
+#define CONFIG_SYS_NAND_MAX_ECCPOS 256
+#define CONFIG_SYS_NAND_MAX_OOBFREE 2
#define CONFIG_SYS_NAND_BASE 0xff800000
#ifdef CONFIG_PHYS_64BIT
#define CONFIG_SYS_NAND_BASE_PHYS (0xf00000000ull | CONFIG_SYS_NAND_BASE)
diff --git a/include/configs/BSC9131RDB.h b/include/configs/BSC9131RDB.h
index 4aed5af..584aba8 100644
--- a/include/configs/BSC9131RDB.h
+++ b/include/configs/BSC9131RDB.h
@@ -29,7 +29,7 @@
#define CONFIG_SPL_INIT_MINIMAL
#define CONFIG_SPL_SERIAL_SUPPORT
#define CONFIG_SPL_NAND_SUPPORT
-#define CONFIG_SPL_NAND_MINIMAL
+#define CONFIG_SPL_NAND_BOOT
#define CONFIG_SPL_FLUSH_IMAGE
#define CONFIG_SPL_TARGET "u-boot-with-spl.bin"
diff --git a/include/configs/BSC9132QDS.h b/include/configs/BSC9132QDS.h
index f025e31..6170cbc 100644
--- a/include/configs/BSC9132QDS.h
+++ b/include/configs/BSC9132QDS.h
@@ -38,7 +38,7 @@
#define CONFIG_SPL_INIT_MINIMAL
#define CONFIG_SPL_SERIAL_SUPPORT
#define CONFIG_SPL_NAND_SUPPORT
-#define CONFIG_SPL_NAND_MINIMAL
+#define CONFIG_SPL_NAND_BOOT
#define CONFIG_SPL_FLUSH_IMAGE
#define CONFIG_SPL_TARGET "u-boot-with-spl.bin"
diff --git a/include/configs/CMS700.h b/include/configs/CMS700.h
index 4a5fc86..0bb22be 100644
--- a/include/configs/CMS700.h
+++ b/include/configs/CMS700.h
@@ -149,6 +149,9 @@
#define CONFIG_SYS_NAND_SKIP_BAD_DOT_I 1 /* ".i" read skips bad blocks */
#define CONFIG_SYS_NAND_QUIET 1
+#define CONFIG_SYS_NAND_MAX_OOBFREE 2
+#define CONFIG_SYS_NAND_MAX_ECCPOS 48
+
/*
* For booting Linux, the board info and command line data
* have to be in the first 8 MB of memory, since this is
diff --git a/include/configs/P1010RDB.h b/include/configs/P1010RDB.h
index fe5309a..ea5cb65 100644
--- a/include/configs/P1010RDB.h
+++ b/include/configs/P1010RDB.h
@@ -37,7 +37,7 @@
#define CONFIG_SPL_INIT_MINIMAL
#define CONFIG_SPL_SERIAL_SUPPORT
#define CONFIG_SPL_NAND_SUPPORT
-#define CONFIG_SPL_NAND_MINIMAL
+#define CONFIG_SPL_NAND_BOOT
#define CONFIG_SPL_FLUSH_IMAGE
#define CONFIG_SPL_TARGET "u-boot-with-spl.bin"
diff --git a/include/configs/P1022DS.h b/include/configs/P1022DS.h
index ba43cce..934a6cb 100644
--- a/include/configs/P1022DS.h
+++ b/include/configs/P1022DS.h
@@ -75,6 +75,8 @@
#endif
#define CONFIG_NAND_FSL_ELBC
+#define CONFIG_SYS_NAND_MAX_ECCPOS 56
+#define CONFIG_SYS_NAND_MAX_OOBFREE 5
#ifdef CONFIG_NAND
#define CONFIG_SPL
diff --git a/include/configs/T1040QDS.h b/include/configs/T1040QDS.h
index d0ebd6a..7d0bc04 100644
--- a/include/configs/T1040QDS.h
+++ b/include/configs/T1040QDS.h
@@ -233,6 +233,7 @@ unsigned long get_board_ddr_clk(void);
#define QIXIS_RCFG_CTL_RECONFIG_IDLE 0x20
#define QIXIS_RCFG_CTL_RECONFIG_START 0x21
#define QIXIS_RCFG_CTL_WATCHDOG_ENBLE 0x08
+#define QIXIS_RST_FORCE_MEM 0x01
#define CONFIG_SYS_CSPR3_EXT (0xf)
#define CONFIG_SYS_CSPR3 (CSPR_PHYS_ADDR(QIXIS_BASE_PHYS) \
@@ -248,7 +249,7 @@ unsigned long get_board_ddr_clk(void);
#define CONFIG_SYS_CS3_FTIM1 (FTIM1_GPCM_TACO(0xff) | \
FTIM1_GPCM_TRAD(0x3f))
#define CONFIG_SYS_CS3_FTIM2 (FTIM2_GPCM_TCS(0x0e) | \
- FTIM2_GPCM_TCH(0x0) | \
+ FTIM2_GPCM_TCH(0x8) | \
FTIM2_GPCM_TWP(0x1f))
#define CONFIG_SYS_CS3_FTIM3 0x0