Merge remote-tracking branch 'u-boot-ti/master' into m

9 files changed, 256 insertions, 69 deletions

diff --git a/arch/arm/cpu/armv7/am33xx/board.c b/arch/arm/cpu/armv7/am33xx/board.c
index b387ac2..ecc2671 100644
--- a/arch/arm/cpu/armv7/am33xx/board.c
+++ b/arch/arm/cpu/armv7/am33xx/board.c
@@ -37,7 +37,6 @@
 DECLARE_GLOBAL_DATA_PTR;
 
 struct wd_timer *wdtimer = (struct wd_timer *)WDT_BASE;
-struct gptimer *timer_base = (struct gptimer *)CONFIG_SYS_TIMERBASE;
 struct uart_sys *uart_base = (struct uart_sys *)DEFAULT_UART_BASE;
 
 static const struct gpio_bank gpio_bank_am33xx[4] = {
@@ -119,22 +118,6 @@ static int read_eeprom(void)
 #define UART_SMART_IDLE_EN	(0x1 << 0x3)
 #endif
 
-#ifdef CONFIG_SPL_BUILD
-/* Initialize timer */
-static void init_timer(void)
-{
-	/* Reset the Timer */
-	writel(0x2, (&timer_base->tscir));
-
-	/* Wait until the reset is done */
-	while (readl(&timer_base->tiocp_cfg) & 1)
-		;
-
-	/* Start the Timer */
-	writel(0x1, (&timer_base->tclr));
-}
-#endif
-
 /*
  * Determine what type of DDR we have.
  */
@@ -183,9 +166,6 @@ void s_init(void)
 	regVal |= UART_SMART_IDLE_EN;
 	writel(regVal, &uart_base->uartsyscfg);
 
-	/* Initialize the Timer */
-	init_timer();
-
 	preloader_console_init();
 
 	/* Initalize the board header */
diff --git a/arch/arm/include/asm/arch-omap3/dss.h b/arch/arm/include/asm/arch-omap3/dss.h
index a830c43..54add4b 100644
--- a/arch/arm/include/asm/arch-omap3/dss.h
+++ b/arch/arm/include/asm/arch-omap3/dss.h
@@ -142,7 +142,6 @@ struct venc_regs {
 };
 
 /* Few Register Offsets */
-#define FRAME_MODE_SHIFT			1
 #define TFTSTN_SHIFT				3
 #define DATALINES_SHIFT				8
 
@@ -182,6 +181,16 @@ struct panel_config {
 	void *frame_buffer;
 };
 
+#define DSS_HBP(bp)    (((bp) - 1) << 20)
+#define DSS_HFP(fp)    (((fp) - 1) << 8)
+#define DSS_HSW(sw)    ((sw) - 1)
+#define DSS_VBP(bp)    ((bp) << 20)
+#define DSS_VFP(fp)    ((fp) << 8)
+#define DSS_VSW(sw)    ((sw) - 1)
+
+#define PANEL_TIMING_H(bp, fp, sw) (DSS_HBP(bp) | DSS_HFP(fp) | DSS_HSW(sw))
+#define PANEL_TIMING_V(bp, fp, sw) (DSS_VBP(bp) | DSS_VFP(fp) | DSS_VSW(sw))
+
 /* Generic DSS Functions */
 void omap3_dss_venc_config(const struct venc_regs *venc_cfg,
 			u32 height, u32 width);
diff --git a/arch/arm/include/asm/arch-omap3/mux.h b/arch/arm/include/asm/arch-omap3/mux.h
index 71f183d..6e92b23 100644
--- a/arch/arm/include/asm/arch-omap3/mux.h
+++ b/arch/arm/include/asm/arch-omap3/mux.h
@@ -451,6 +451,11 @@
 #define CONTROL_PADCONF_GPIO128		0x0A58
 #define CONTROL_PADCONF_GPIO129		0x0A5A
 
+/* AM/DM37xx specific: gpio_127, gpio_127 and gpio_129 require configuration
+ * of the extended drain cells */
+#define OMAP34XX_CTRL_WKUP_CTRL		(OMAP34XX_CTRL_BASE + 0x0A5C)
+#define OMAP34XX_CTRL_WKUP_CTRL_GPIO_IO_PWRDNZ	(1<<6)
+
 #define MUX_VAL(OFFSET,VALUE)\
 	writew((VALUE), OMAP34XX_CTRL_BASE + (OFFSET));
 
diff --git a/board/technexion/twister/twister.c b/board/technexion/twister/twister.c
index c2b10ac..7429e93 100644
--- a/board/technexion/twister/twister.c
+++ b/board/technexion/twister/twister.c
@@ -100,8 +100,18 @@ int board_init(void)
 
 int misc_init_r(void)
 {
+	char *eth_addr;
+
 	dieid_num_r();
 
+	eth_addr = getenv("ethaddr");
+	if (eth_addr)
+		return 0;
+
+#ifndef CONFIG_SPL_BUILD
+	TAM3517_READ_MAC_FROM_EEPROM;
+#endif
+
 	return 0;
 }
 
diff --git a/board/teejet/mt_ventoux/mt_ventoux.c b/board/teejet/mt_ventoux/mt_ventoux.c
index 9fbaedd..b8ad447 100644
--- a/board/teejet/mt_ventoux/mt_ventoux.c
+++ b/board/teejet/mt_ventoux/mt_ventoux.c
@@ -21,13 +21,17 @@
 
 #include <common.h>
 #include <netdev.h>
+#include <malloc.h>
 #include <fpga.h>
+#include <video_fb.h>
 #include <asm/io.h>
 #include <asm/arch/mem.h>
 #include <asm/arch/mux.h>
 #include <asm/arch/sys_proto.h>
 #include <asm/omap_gpio.h>
 #include <asm/arch/mmc_host_def.h>
+#include <asm/arch/dss.h>
+#include <asm/arch/clocks.h>
 #include <i2c.h>
 #include <spartan3.h>
 #include <asm/gpio.h>
@@ -39,6 +43,9 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
+#define BUZZER		140
+#define SPEAKER		141
+
 #ifndef CONFIG_FPGA
 #error "The Teejet mt_ventoux must have CONFIG_FPGA enabled"
 #endif
@@ -50,6 +57,42 @@ DECLARE_GLOBAL_DATA_PTR;
 #define FPGA_INIT	119
 #define FPGA_DONE	154
 
+#define LCD_PWR		138
+#define LCD_PON_PIN	139
+
+#if defined(CONFIG_VIDEO) && !defined(CONFIG_SPL_BUILD)
+static struct {
+	u32 xres;
+	u32 yres;
+} panel_resolution[] = {
+	{ 480, 272 },
+	{ 800, 480 }
+};
+
+static struct panel_config lcd_cfg[] = {
+	{
+	.timing_h       = PANEL_TIMING_H(4, 8, 41),
+	.timing_v       = PANEL_TIMING_V(2, 4, 10),
+	.pol_freq       = 0x00000000, /* Pol Freq */
+	.divisor        = 0x0001000d, /* 33Mhz Pixel Clock */
+	.panel_type     = 0x01, /* TFT */
+	.data_lines     = 0x03, /* 24 Bit RGB */
+	.load_mode      = 0x02, /* Frame Mode */
+	.panel_color	= 0,
+	},
+	{
+	.timing_h       = PANEL_TIMING_H(20, 192, 4),
+	.timing_v       = PANEL_TIMING_V(2, 20, 10),
+	.pol_freq       = 0x00004000, /* Pol Freq */
+	.divisor        = 0x0001000E, /* 36Mhz Pixel Clock */
+	.panel_type     = 0x01, /* TFT */
+	.data_lines     = 0x03, /* 24 Bit RGB */
+	.load_mode      = 0x02, /* Frame Mode */
+	.panel_color	= 0,
+	}
+};
+#endif
+
 /* Timing definitions for FPGA */
 static const u32 gpmc_fpga[] = {
 	FPGA_GPMC_CONFIG1,
@@ -193,6 +236,33 @@ int board_init(void)
 
 	mt_ventoux_init_fpga();
 
+	/* GPIO_140: speaker #mute */
+	MUX_VAL(CP(MCBSP3_DX),		(IEN | PTU | EN | M4))
+	/* GPIO_141: Buzz Hi */
+	MUX_VAL(CP(MCBSP3_DR),		(IEN  | PTU | EN | M4))
+
+	/* Turning off the buzzer */
+	gpio_request(BUZZER, "BUZZER_MUTE");
+	gpio_request(SPEAKER, "SPEAKER");
+	gpio_direction_output(BUZZER, 0);
+	gpio_direction_output(SPEAKER, 0);
+
+	return 0;
+}
+
+int misc_init_r(void)
+{
+	char *eth_addr;
+
+	dieid_num_r();
+
+	eth_addr = getenv("ethaddr");
+	if (eth_addr)
+		return 0;
+
+#ifndef CONFIG_SPL_BUILD
+	TAM3517_READ_MAC_FROM_EEPROM;
+#endif
 	return 0;
 }
 
@@ -224,3 +294,46 @@ int board_mmc_init(bd_t *bis)
 	return omap_mmc_init(0, 0, 0);
 }
 #endif
+
+#if defined(CONFIG_VIDEO) && !defined(CONFIG_SPL_BUILD)
+int board_video_init(void)
+{
+	struct prcm *prcm_base = (struct prcm *)PRCM_BASE;
+	struct panel_config *panel = &lcd_cfg[0];
+	char *s;
+	u32 index = 0;
+
+	void *fb;
+
+	fb = (void *)0x88000000;
+
+	s = getenv("panel");
+	if (s) {
+		index = simple_strtoul(s, NULL, 10);
+		if (index < ARRAY_SIZE(lcd_cfg))
+			panel = &lcd_cfg[index];
+		else
+			return 0;
+	}
+
+	panel->frame_buffer = fb;
+	printf("Panel: %dx%d\n", panel_resolution[index].xres,
+		panel_resolution[index].yres);
+	panel->lcd_size = (panel_resolution[index].yres - 1) << 16 |
+		(panel_resolution[index].xres - 1);
+
+	gpio_request(LCD_PWR, "LCD Power");
+	gpio_request(LCD_PON_PIN, "LCD Pon");
+	gpio_direction_output(LCD_PWR, 0);
+	gpio_direction_output(LCD_PON_PIN, 1);
+
+
+	setbits_le32(&prcm_base->fclken_dss, FCK_DSS_ON);
+	setbits_le32(&prcm_base->iclken_dss, ICK_DSS_ON);
+
+	omap3_dss_panel_config(panel);
+	omap3_dss_enable();
+
+	return 0;
+}
+#endif
diff --git a/board/teejet/mt_ventoux/mt_ventoux.h b/board/teejet/mt_ventoux/mt_ventoux.h
index 9b2e43e..1cd7ec2 100644
--- a/board/teejet/mt_ventoux/mt_ventoux.h
+++ b/board/teejet/mt_ventoux/mt_ventoux.h
@@ -142,7 +142,8 @@ const omap3_sysinfo sysinfo = {
 			/*GPIO_62: FPGA_RESET */ \
 	MUX_VAL(CP(GPMC_WAIT0),		(IEN  | PTU | EN  | M4)) \
 	MUX_VAL(CP(GPMC_WAIT1),		(IEN  | PTU | EN  | M4)) \
-	MUX_VAL(CP(GPMC_WAIT2),		(IEN  | PTU | EN  | M4)) /*GPIO_64*/ \
+	MUX_VAL(CP(GPMC_WAIT2),		(IEN  | PTU | EN  | M4)) \
+			/* GPIO_64*/ \
 	MUX_VAL(CP(GPMC_WAIT3),		(IEN  | PTU | EN  | M4)) \
 	/* DSS */\
 	MUX_VAL(CP(DSS_PCLK),		(IDIS | PTD | DIS | M0)) \
@@ -174,26 +175,6 @@ const omap3_sysinfo sysinfo = {
 	MUX_VAL(CP(DSS_DATA22),		(IDIS | PTD | DIS | M0)) \
 	MUX_VAL(CP(DSS_DATA23),		(IDIS | PTD | DIS | M0)) \
 	/* CAMERA */\
-	MUX_VAL(CP(CAM_HS),		(IEN  | PTU | EN  | M0)) \
-	MUX_VAL(CP(CAM_VS),		(IEN  | PTU | EN  | M0)) \
-	MUX_VAL(CP(CAM_XCLKA),		(IDIS | PTD | DIS | M0)) \
-	MUX_VAL(CP(CAM_PCLK),		(IEN  | PTU | EN  | M0)) \
-	MUX_VAL(CP(CAM_FLD),		(IDIS | PTD | DIS | M4)) /*GPIO_98*/\
-	MUX_VAL(CP(CAM_D0),		(IEN  | PTD | DIS | M0)) \
-	MUX_VAL(CP(CAM_D1),		(IEN  | PTD | DIS | M0)) \
-	MUX_VAL(CP(CAM_D2),		(IEN  | PTD | DIS | M0)) \
-	MUX_VAL(CP(CAM_D3),		(IEN  | PTD | DIS | M0)) \
-	MUX_VAL(CP(CAM_D4),		(IEN  | PTD | DIS | M0)) \
-	MUX_VAL(CP(CAM_D5),		(IEN  | PTD | DIS | M0)) \
-	MUX_VAL(CP(CAM_D6),		(IEN  | PTD | DIS | M0)) \
-	MUX_VAL(CP(CAM_D7),		(IEN  | PTD | DIS | M0)) \
-	MUX_VAL(CP(CAM_D8),		(IEN  | PTD | DIS | M0)) \
-	MUX_VAL(CP(CAM_D9),		(IEN  | PTD | DIS | M0)) \
-	MUX_VAL(CP(CAM_D10),		(IEN  | PTD | DIS | M0)) \
-	MUX_VAL(CP(CAM_D11),		(IEN  | PTD | DIS | M0)) \
-	MUX_VAL(CP(CAM_XCLKB),		(IDIS | PTD | DIS | M0)) \
-	MUX_VAL(CP(CAM_WEN),		(IEN  | PTD | DIS | M4)) /*GPIO_167*/\
-	MUX_VAL(CP(CAM_STROBE),		(IDIS | PTD | DIS | M0)) \
 	MUX_VAL(CP(CSI2_DX0),		(IEN  | PTD | DIS | M0)) \
 	MUX_VAL(CP(CSI2_DY0),		(IEN  | PTD | DIS | M0)) \
 	MUX_VAL(CP(CSI2_DX1),		(IEN  | PTD | DIS | M0)) \
@@ -209,6 +190,7 @@ const omap3_sysinfo sysinfo = {
 			/* GPIO_126: CardDetect */\
 	MUX_VAL(CP(MMC1_DAT5),		(IEN  | PTU | EN  | M4)) \
 	MUX_VAL(CP(MMC1_DAT6),		(IEN  | PTU | EN  | M4)) \
+			/*GPIO_128 */ \
 	MUX_VAL(CP(MMC1_DAT7),		(IEN  | PTU | EN  | M4)) \
 	\
 	MUX_VAL(CP(MMC2_CLK),		(IEN  | PTU | EN | M0)) /*MMC2_CLK*/\
@@ -221,7 +203,7 @@ const omap3_sysinfo sysinfo = {
 	MUX_VAL(CP(MMC2_DAT5),		(IDIS  | PTU | EN  | M4)) \
 	MUX_VAL(CP(MMC2_DAT6),		(IDIS  | PTU | EN  | M4)) \
 			/* GPIO_138: LCD_ENVD */\
-	MUX_VAL(CP(MMC2_DAT7),		(IDIS  | PTU | EN  | M4)) \
+	MUX_VAL(CP(MMC2_DAT7),		(IDIS  | PTD | EN  | M4)) \
 			/* GPIO_139: LCD_PON */\
 	/* McBSP */\
 	MUX_VAL(CP(MCBSP_CLKS),		(IEN  | PTU | DIS | M0)) \
@@ -241,16 +223,12 @@ const omap3_sysinfo sysinfo = {
 	MUX_VAL(CP(MCBSP2_DX),		(IEN | PTD | EN | M4)) \
 			/* GPIO_119: FPGA_INIT */ \
 	\
-	MUX_VAL(CP(MCBSP3_DX),		(IEN | PTU | EN | M4)) \
-			/* GPIO_140: speaker #mute */\
-	MUX_VAL(CP(MCBSP3_DR),		(IEN  | PTU | EN | M4)) \
-			/* GPIO_141: Buzz Hi */\
 	MUX_VAL(CP(MCBSP3_CLKX),	(IEN  | PTU | EN | M4)) \
 	MUX_VAL(CP(MCBSP3_FSX),		(IEN  | PTU | EN | M4)) \
 	\
 	MUX_VAL(CP(MCBSP4_CLKX),	(IEN | PTD | DIS | M4)) \
 			/*GPIO_152: Ignition Sense */ \
-	MUX_VAL(CP(MCBSP4_DR),		(IDIS | PTD | DIS | M4)) \
+	MUX_VAL(CP(MCBSP4_DR),		(IEN | PTD | DIS | M4)) \
 			/*GPIO_153: Power Button Sense */ \
 	MUX_VAL(CP(MCBSP4_DX),		(IEN | PTU | DIS | M4)) \
 			/* GPIO_154: FPGA_DONE */ \
@@ -264,10 +242,14 @@ const omap3_sysinfo sysinfo = {
 			/* GPIO_150: USB status 1 */\
 	\
 	MUX_VAL(CP(UART1_RX),		(IEN  | PTD | DIS | M0)) \
-	MUX_VAL(CP(UART2_CTS),		(IEN  | PTU | EN  | M0)) \
-	MUX_VAL(CP(UART2_RTS),		(IDIS | PTD | DIS | M0)) \
-	MUX_VAL(CP(UART2_TX),		(IDIS | PTD | DIS | M0)) \
-	MUX_VAL(CP(UART2_RX),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(UART2_CTS),		(IEN  | PTU | EN  | M2)) \
+			/* gpt9_pwm */\
+	MUX_VAL(CP(UART2_RTS),		(IEN | PTD | DIS | M2)) \
+			/* gpt10_pwm */\
+	MUX_VAL(CP(UART2_TX),		(IEN | PTD | DIS | M2)) \
+			/* gpt8_pwm */\
+	MUX_VAL(CP(UART2_RX),		(IEN  | PTD | DIS | M2)) \
+			/* gpt11_pwm */\
 	\
 	MUX_VAL(CP(UART3_CTS_RCTX),	(IDIS  | PTD | DIS | M4)) \
 			/*GPIO_163 : TS_PENIRQ*/ \
@@ -299,22 +281,24 @@ const omap3_sysinfo sysinfo = {
 	MUX_VAL(CP(MCSPI2_CS0),		(IEN  | PTD | EN  | M4)) \
 	MUX_VAL(CP(MCSPI2_CS1),		(IEN  | PTD | EN  | M0)) \
 	/* CCDC */\
-	MUX_VAL(CP(CCDC_PCLK),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(CCDC_PCLK),		(IEN  | PTU | EN  | M4)) \
+			/* GPIO94 */\
 	MUX_VAL(CP(CCDC_FIELD),		(IEN  | PTD | DIS | M4)) \
 			/* GPIO95: #Enable Output */\
-	MUX_VAL(CP(CCDC_HD),		(IEN  | PTU | EN  | M0)) \
-	MUX_VAL(CP(CCDC_VD),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(CCDC_HD),		(IEN  | PTU | EN  | M4)) \
+	MUX_VAL(CP(CCDC_VD),		(IEN  | PTU | EN  | M4)) \
 	MUX_VAL(CP(CCDC_WEN),		(IEN  | PTD | DIS | M4)) \
 			/* GPIO 99: #SOM_PWR_OFF */\
-	MUX_VAL(CP(CCDC_DATA0),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(CCDC_DATA0),		(IEN  | PTD | DIS | M4)) \
 	MUX_VAL(CP(CCDC_DATA1),		(IEN  | PTD | DIS | M4)) \
 			/* GPIO_100: #power out */\
-	MUX_VAL(CP(CCDC_DATA2),		(IEN  | PTD | DIS | M0)) \
-	MUX_VAL(CP(CCDC_DATA3),		(IEN  | PTD | DIS | M0)) \
-	MUX_VAL(CP(CCDC_DATA4),		(IEN  | PTD | DIS | M0)) \
-	MUX_VAL(CP(CCDC_DATA5),		(IEN  | PTD | DIS | M0)) \
-	MUX_VAL(CP(CCDC_DATA6),		(IEN  | PTD | DIS | M0)) \
-	MUX_VAL(CP(CCDC_DATA7),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(CCDC_DATA2),		(IEN  | PTD | DIS | M4)) \
+	MUX_VAL(CP(CCDC_DATA3),		(IEN  | PTD | DIS | M4)) \
+			/* GPIO_102 */\
+	MUX_VAL(CP(CCDC_DATA4),		(IEN  | PTD | DIS | M4)) \
+	MUX_VAL(CP(CCDC_DATA5),		(IEN  | PTD | DIS | M4)) \
+	MUX_VAL(CP(CCDC_DATA6),		(IEN  | PTD | DIS | M4)) \
+	MUX_VAL(CP(CCDC_DATA7),		(IEN  | PTD | DIS | M4)) \
 	/* RMII */\
 	MUX_VAL(CP(RMII_MDIO_DATA),	(IEN  |  M0)) \
 	MUX_VAL(CP(RMII_MDIO_CLK),	(M0)) \
@@ -363,7 +347,8 @@ const omap3_sysinfo sysinfo = {
 	MUX_VAL(CP(SYS_BOOT8),		(IEN  | PTD | EN  | M0)) \
 	\
 	MUX_VAL(CP(SYS_OFF_MODE),	(IEN  | PTD | DIS | M0)) \
-	MUX_VAL(CP(SYS_CLKOUT1),	(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SYS_CLKOUT1),	(IDIS | PTD | DIS | M4)) \
+			/* gpio_10 */\
 	MUX_VAL(CP(SYS_CLKOUT2),	(IEN  | PTU | EN  | M0)) \
 	/* JTAG */\
 	MUX_VAL(CP(JTAG_nTRST),		(IEN  | PTD | DIS | M0)) \
@@ -387,12 +372,15 @@ const omap3_sysinfo sysinfo = {
 	MUX_VAL(CP(ETK_D7_ES2),		(IEN  | PTU | EN  | M3)) \
 	MUX_VAL(CP(ETK_D8_ES2),		(IEN  | PTD | EN  | M3)) \
 	MUX_VAL(CP(ETK_D9_ES2),		(IEN  | PTD | EN  | M3)) \
-	MUX_VAL(CP(ETK_D10_ES2),	(IEN  | PTU | EN  | M4)) \
+	MUX_VAL(CP(ETK_D10_ES2),	(IDIS | PTD | EN  | M4)) \
+					/* gpio_24 */\
 	MUX_VAL(CP(ETK_D11_ES2),	(IDIS | PTD | DIS | M4)) \
-	MUX_VAL(CP(ETK_D12_ES2),	(IEN  | PTD | DIS | M3)) \
+	MUX_VAL(CP(ETK_D12_ES2),	(IEN  | PTD | DIS | M4)) \
+					/* gpio_26 */\
 	MUX_VAL(CP(ETK_D13_ES2),	(IEN  | PTD | DIS | M3)) \
-	MUX_VAL(CP(ETK_D14_ES2),	(IEN  | PTD | DIS | M3)) \
-	MUX_VAL(CP(ETK_D15_ES2),	(IEN  | PTD | DIS | M3)) \
+	MUX_VAL(CP(ETK_D14_ES2),	(IEN  | PTD | DIS | M4)) \
+	MUX_VAL(CP(ETK_D15_ES2),	(IEN  | PTD | DIS | M4)) \
+					/* gpio_29 */\
 	/* Die to Die */\
 	MUX_VAL(CP(D2D_MCAD34),		(IEN  | PTD | EN  | M0)) \
 	MUX_VAL(CP(D2D_MCAD35),		(IEN  | PTD | EN  | M0)) \
diff --git a/drivers/video/omap3_dss.c b/drivers/video/omap3_dss.c
index 6686718..b1424bf 100644
--- a/drivers/video/omap3_dss.c
+++ b/drivers/video/omap3_dss.c
@@ -112,7 +112,7 @@ void omap3_dss_panel_config(const struct panel_config *panel_cfg)
 	writel(panel_cfg->pol_freq, &dispc->pol_freq);
 	writel(panel_cfg->divisor, &dispc->divisor);
 	writel(panel_cfg->lcd_size, &dispc->size_lcd);
-	writel(panel_cfg->load_mode << FRAME_MODE_SHIFT, &dispc->config);
+	writel(panel_cfg->load_mode << LOADMODE_SHIFT, &dispc->config);
 	writel(panel_cfg->panel_type << TFTSTN_SHIFT |
 		panel_cfg->data_lines << DATALINES_SHIFT, &dispc->control);
 	writel(panel_cfg->panel_color, &dispc->default_color0);
@@ -121,7 +121,6 @@ void omap3_dss_panel_config(const struct panel_config *panel_cfg)
 	if (!panel_cfg->frame_buffer)
 		return;
 
-	writel(panel_cfg->load_mode << LOADMODE_SHIFT, &dispc->config);
 	writel(8 << GFX_FORMAT_SHIFT | GFX_ENABLE, &dispc->gfx_attributes);
 	writel(1, &dispc->gfx_row_inc);
 	writel(1, &dispc->gfx_pixel_inc);
diff --git a/include/configs/mt_ventoux.h b/include/configs/mt_ventoux.h
index 5db6d57..8d35943 100644
--- a/include/configs/mt_ventoux.h
+++ b/include/configs/mt_ventoux.h
@@ -2,6 +2,9 @@
  * Copyright (C) 2011
  * Stefano Babic, DENX Software Engineering, sbabic@denx.de.
  *
+ *
+ * Configuration settings for the Teejet mt_ventoux board.
+ *
  * Copyright (C) 2009 TechNexion Ltd.
  *
  * This program is free software; you can redistribute it and/or modify
@@ -24,6 +27,10 @@
 
 #include "tam3517-common.h"
 
+#undef CONFIG_SYS_MALLOC_LEN
+#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + (128 << 10) + \
+					6 * 1024 * 1024)
+
 #define MACH_TYPE_AM3517_MT_VENTOUX	3832
 #define CONFIG_MACH_TYPE	MACH_TYPE_AM3517_MT_VENTOUX
 
@@ -31,6 +38,7 @@
 #define CONFIG_BOOTFILE		"uImage"
 #define CONFIG_AUTO_COMPLETE
 
+#define CONFIG_OMAP3_GPIO_4
 #define CONFIG_HOSTNAME mt_ventoux
 
 /*
@@ -62,6 +70,15 @@
 #define CONFIG_FPGA_DELAY() udelay(1)
 #define CONFIG_SYS_FPGA_PROG_FEEDBACK
 
+#define CONFIG_VIDEO
+#define CONFIG_CFB_CONSOLE
+#define CONFIG_VGA_AS_SINGLE_DEVICE
+#define CONFIG_SPLASH_SCREEN
+#define CONFIG_VIDEO_BMP_RLE8
+#define CONFIG_CMD_BMP
+#define CONFIG_VIDEO_OMAP3	/* DSS Support			*/
+#define CONFIG_SYS_CONSOLE_IS_IN_ENV
+
 #define	CONFIG_EXTRA_ENV_SETTINGS	CONFIG_TAM3517_SETTINGS \
 	"bootcmd=run net_nfs\0"
 
diff --git a/include/configs/tam3517-common.h b/include/configs/tam3517-common.h
index 375265d..a13fd93 100644
--- a/include/configs/tam3517-common.h
+++ b/include/configs/tam3517-common.h
@@ -124,6 +124,7 @@
 #define CONFIG_CMD_NAND		/* NAND support			*/
 #define CONFIG_CMD_PING
 #define CONFIG_CMD_USB
+#define CONFIG_CMD_EEPROM
 
 #undef CONFIG_CMD_FLASH		/* only NAND on the SOM */
 #undef CONFIG_CMD_IMLS
@@ -134,6 +135,9 @@
 #define CONFIG_SYS_I2C_SLAVE		1
 #define CONFIG_SYS_I2C_BUS		0
 #define CONFIG_SYS_I2C_BUS_SELECT	1
+#define CONFIG_SYS_I2C_EEPROM_ADDR	0x50		/* base address */
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN	1		/* bytes of address */
+#define CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW	0x07
 #define CONFIG_DRIVER_OMAP34XX_I2C
 
 
@@ -347,4 +351,66 @@
 		"fi;"							\
 		"else echo U-Boot not downloaded..exiting;fi\0"		\
 
+
+/*
+ * this is common code for all TAM3517 boards.
+ * MAC address is stored from manufacturer in
+ * I2C EEPROM
+ */
+#if !(defined(__KERNEL_STRICT_NAMES) || defined(__ASSEMBLY__))
+
+/*
+ * The I2C EEPROM on the TAM3517 contains
+ * mac address and production data
+ */
+struct tam3517_module_info {
+	char customer[48];
+	char product[48];
+
+	/*
+	 * bit 0~47  : sequence number
+	 * bit 48~55 : week of year, from 0.
+	 * bit 56~63 : year
+	 */
+	unsigned long long sequence_number;
+
+	/*
+	 * bit 0~7   : revision fixed
+	 * bit 8~15  : revision major
+	 * bit 16~31 : TNxxx
+	 */
+	unsigned int revision;
+	unsigned char eth_addr[4][8];
+	unsigned char _rev[100];
+};
+
+#define TAM3517_READ_MAC_FROM_EEPROM	\
+do {					\
+	struct tam3517_module_info info;\
+	char buf[80], ethname[20];	\
+	int i;				\
+	i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);	\
+	if (eeprom_read(CONFIG_SYS_I2C_EEPROM_ADDR, 0,		\
+			(void *)&info, sizeof(info)))		\
+		break;						\
+	memset(buf, 0, sizeof(buf));				\
+	for (i = 0 ; i < ARRAY_SIZE(info.eth_addr); i++) {	\
+		sprintf(buf, "%02X:%02X:%02X:%02X:%02X:%02X",	\
+			info.eth_addr[i][5],			\
+			info.eth_addr[i][4],			\
+			info.eth_addr[i][3],			\
+			info.eth_addr[i][2],			\
+			info.eth_addr[i][1],			\
+			info.eth_addr[i][0]);			\
+								\
+		if (i)						\
+			sprintf(ethname, "eth%daddr", i);	\
+		else						\
+			sprintf(ethname, "ethaddr");		\
+		printf("Setting %s from EEPROM with %s\n", ethname, buf);\
+		setenv(ethname, buf);				\
+	}							\
+} while (0)
+#endif
+
 #endif /* __TAM3517_H */