diff options
| author | Heiko Schocher <hs@denx.de> | 2014-07-18 06:07:21 +0200 |
|---|---|---|
| committer | Stefano Babic <sbabic@denx.de> | 2014-07-23 12:26:45 +0200 |
| commit | 562f8df18da62ae02c4ace1e530451fe82c3312d (patch) | |
| tree | f3ac604fb5cc1a3865a91a99763f3d855c19bd4f | |
| parent | a0ae0091d783b1140f8d321d8c6d221aeb0d39d0 (diff) | |
| download | u-boot-imx-562f8df18da62ae02c4ace1e530451fe82c3312d.zip u-boot-imx-562f8df18da62ae02c4ace1e530451fe82c3312d.tar.gz u-boot-imx-562f8df18da62ae02c4ace1e530451fe82c3312d.tar.bz2 | |
spi: add config option to enable the WP pin function on st micron flashes
enable the W#/Vpp signal to disable writing to the status
register on ST MICRON flashes like the N25Q128 thorugh
the new config option CONFIG_SYS_SPI_ST_ENABLE_WP_PIN
Signed-off-by: Heiko Schocher <hs@denx.de>
Cc: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com>
| -rw-r--r-- | README | 11 | ||||
| -rw-r--r-- | drivers/mtd/spi/sf_internal.h | 4 | ||||
| -rw-r--r-- | drivers/mtd/spi/sf_probe.c | 30 |
3 files changed, 45 insertions, 0 deletions
@@ -2930,6 +2930,17 @@ CBFS (Coreboot Filesystem) support memories can be connected with a given cs line. currently Xilinx Zynq qspi support these type of connections. + CONFIG_SYS_SPI_ST_ENABLE_WP_PIN + enable the W#/Vpp signal to disable writing to the status + register on ST MICRON flashes like the N25Q128. + The status register write enable/disable bit, combined with + the W#/VPP signal provides hardware data protection for the + device as follows: When the enable/disable bit is set to 1, + and the W#/VPP signal is driven LOW, the status register + nonvolatile bits become read-only and the WRITE STATUS REGISTER + operation will not execute. The only way to exit this + hardware-protected mode is to drive W#/VPP HIGH. + - SystemACE Support: CONFIG_SYSTEMACE diff --git a/drivers/mtd/spi/sf_internal.h b/drivers/mtd/spi/sf_internal.h index 6bcd522..19d4914 100644 --- a/drivers/mtd/spi/sf_internal.h +++ b/drivers/mtd/spi/sf_internal.h @@ -60,6 +60,10 @@ #define STATUS_QEB_MXIC (1 << 6) #define STATUS_PEC (1 << 7) +#ifdef CONFIG_SYS_SPI_ST_ENABLE_WP_PIN +#define STATUS_SRWD (1 << 7) /* SR write protect */ +#endif + /* Flash timeout values */ #define SPI_FLASH_PROG_TIMEOUT (2 * CONFIG_SYS_HZ) #define SPI_FLASH_PAGE_ERASE_TIMEOUT (5 * CONFIG_SYS_HZ) diff --git a/drivers/mtd/spi/sf_probe.c b/drivers/mtd/spi/sf_probe.c index 36ae5e0..4d148d1 100644 --- a/drivers/mtd/spi/sf_probe.c +++ b/drivers/mtd/spi/sf_probe.c @@ -281,6 +281,34 @@ int spi_flash_decode_fdt(const void *blob, struct spi_flash *flash) } #endif /* CONFIG_OF_CONTROL */ +#ifdef CONFIG_SYS_SPI_ST_ENABLE_WP_PIN +/* enable the W#/Vpp signal to disable writing to the status register */ +static int spi_enable_wp_pin(struct spi_flash *flash) +{ + u8 status; + int ret; + + ret = spi_flash_cmd_read_status(flash, &status); + if (ret < 0) + return ret; + + ret = spi_flash_cmd_write_status(flash, STATUS_SRWD); + if (ret < 0) + return ret; + + ret = spi_flash_cmd_write_disable(flash); + if (ret < 0) + return ret; + + return 0; +} +#else +static int spi_enable_wp_pin(struct spi_flash *flash) +{ + return 0; +} +#endif + static struct spi_flash *spi_flash_probe_slave(struct spi_slave *spi) { struct spi_flash *flash = NULL; @@ -351,6 +379,8 @@ static struct spi_flash *spi_flash_probe_slave(struct spi_slave *spi) puts(" Full access #define CONFIG_SPI_FLASH_BAR\n"); } #endif + if (spi_enable_wp_pin(flash)) + puts("Enable WP pin failed\n"); /* Release spi bus */ spi_release_bus(spi); |