i2c, multibus: get rid of CONFIG_I2C_MUX

CONFIG_I2C_MUX is replaced through the new i2c multibus/multiadapter
framework, configured through CONFIG_SYS_I2C. As CONFIG_I2C_MUX
is only used on the keymile boards, and they are now completely
moved to the new framework, remove CONFIG_I2C_MUX.

Signed-off-by: Heiko Schocher <hs@denx.de>
Cc: Holger Brunck <holger.brunck@keymile.com>
Tested-By: Holger Brunck <holger.brunck@keymile.com>

5 files changed, 6 insertions, 342 deletions

diff --git a/README b/README
index 636107f..f00e41b 100644
--- a/README
+++ b/README
@@ -2225,53 +2225,6 @@ CBFS (Coreboot Filesystem) support
 		If not defined, then U-Boot uses predefined value for
 		specified DTT device.
 
-		CONFIG_I2C_MUX
-
-		Define this option if you have I2C devices reached over 1 .. n
-		I2C Muxes like the pca9544a. This option addes a new I2C
-		Command "i2c bus [muxtype:muxaddr:muxchannel]" which adds a
-		new I2C Bus to the existing I2C Busses. If you select the
-		new Bus with "i2c dev", u-bbot sends first the commandos for
-		the muxes to activate this new "bus".
-
-		CONFIG_I2C_MULTI_BUS must be also defined, to use this
-		feature!
-
-		Example:
-		Adding a new I2C Bus reached over 2 pca9544a muxes
-			The First mux with address 70 and channel 6
-			The Second mux with address 71 and channel 4
-
-		=> i2c bus pca9544a:70:6:pca9544a:71:4
-
-		Use the "i2c bus" command without parameter, to get a list
-		of I2C Busses with muxes:
-
-		=> i2c bus
-		Busses reached over muxes:
-		Bus ID: 2
-		  reached over Mux(es):
-		    pca9544a@70 ch: 4
-		Bus ID: 3
-		  reached over Mux(es):
-		    pca9544a@70 ch: 6
-		    pca9544a@71 ch: 4
-		=>
-
-		If you now switch to the new I2C Bus 3 with "i2c dev 3"
-		u-boot first sends the command to the mux@70 to enable
-		channel 6, and then the command to the mux@71 to enable
-		the channel 4.
-
-		After that, you can use the "normal" i2c commands as
-		usual to communicate with your I2C devices behind
-		the 2 muxes.
-
-		This option is actually implemented for the bitbanging
-		algorithm in common/soft_i2c.c and for the Hardware I2C
-		Bus on the MPC8260. But it should be not so difficult
-		to add this option to other architectures.
-
 		CONFIG_SOFT_I2C_READ_REPEATED_START
 
 		defining this will force the i2c_read() function in
diff --git a/arch/powerpc/cpu/mpc8260/i2c.c b/arch/powerpc/cpu/mpc8260/i2c.c
index e2341e9..bbbe404 100644
--- a/arch/powerpc/cpu/mpc8260/i2c.c
+++ b/arch/powerpc/cpu/mpc8260/i2c.c
@@ -746,23 +746,9 @@ unsigned int i2c_get_bus_num(void)
 
 int i2c_set_bus_num(unsigned int bus)
 {
-#if defined(CONFIG_I2C_MUX)
-	if (bus < CONFIG_SYS_MAX_I2C_BUS) {
-		i2c_bus_num = bus;
-	} else {
-		int ret;
-
-		ret = i2x_mux_select_mux(bus);
-		if (ret == 0)
-			i2c_bus_num = bus;
-		else
-			return ret;
-	}
-#else
 	if (bus >= CONFIG_SYS_MAX_I2C_BUS)
 		return -1;
 	i2c_bus_num = bus;
-#endif
 	return 0;
 }
 
diff --git a/common/cmd_i2c.c b/common/cmd_i2c.c
index 5614a6d..5c60d31 100644
--- a/common/cmd_i2c.c
+++ b/common/cmd_i2c.c
@@ -110,8 +110,7 @@ static uint	i2c_mm_last_alen;
  * pairs.  The following macros take care of this */
 
 #if defined(CONFIG_SYS_I2C_NOPROBES)
-#if defined(CONFIG_SYS_I2C) || defined(CONFIG_I2C_MUX) || \
-	defined(CONFIG_I2C_MULTI_BUS)
+#if defined(CONFIG_SYS_I2C) || defined(CONFIG_I2C_MULTI_BUS)
 static struct
 {
 	uchar	bus;
@@ -132,11 +131,6 @@ static uchar i2c_no_probes[] = CONFIG_SYS_I2C_NOPROBES;
 #define NUM_ELEMENTS_NOPROBE (sizeof(i2c_no_probes)/sizeof(i2c_no_probes[0]))
 #endif
 
-#if defined(CONFIG_I2C_MUX)
-static I2C_MUX_DEVICE	*i2c_mux_devices = NULL;
-static	int	i2c_mux_busid = CONFIG_SYS_MAX_I2C_BUS;
-#endif
-
 #define DISP_LINE_LEN	16
 
 /**
@@ -1554,7 +1548,7 @@ static int do_i2c_reset(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv
 static cmd_tbl_t cmd_i2c_sub[] = {
 #if defined(CONFIG_SYS_I2C)
 	U_BOOT_CMD_MKENT(bus, 1, 1, do_i2c_show_bus, "", ""),
-#endif  /* CONFIG_I2C_MUX */
+#endif
 	U_BOOT_CMD_MKENT(crc32, 3, 1, do_i2c_crc, "", ""),
 #if defined(CONFIG_SYS_I2C) || \
 	defined(CONFIG_I2C_MULTI_BUS)
@@ -1618,7 +1612,7 @@ static int do_i2c(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[])
 static char i2c_help_text[] =
 #if defined(CONFIG_SYS_I2C)
 	"bus [muxtype:muxaddr:muxchannel] - show I2C bus info\n"
-#endif  /* CONFIG_I2C_MUX */
+#endif
 	"crc32 chip address[.0, .1, .2] count - compute CRC32 checksum\n"
 #if defined(CONFIG_SYS_I2C) || \
 	defined(CONFIG_I2C_MULTI_BUS)
@@ -1647,225 +1641,3 @@ U_BOOT_CMD(
 	"I2C sub-system",
 	i2c_help_text
 );
-
-#if defined(CONFIG_I2C_MUX)
-static int i2c_mux_add_device(I2C_MUX_DEVICE *dev)
-{
-	I2C_MUX_DEVICE	*devtmp = i2c_mux_devices;
-
-	if (i2c_mux_devices == NULL) {
-		i2c_mux_devices = dev;
-		return 0;
-	}
-	while (devtmp->next != NULL)
-		devtmp = devtmp->next;
-
-	devtmp->next = dev;
-	return 0;
-}
-
-I2C_MUX_DEVICE	*i2c_mux_search_device(int id)
-{
-	I2C_MUX_DEVICE	*device = i2c_mux_devices;
-
-	while (device != NULL) {
-		if (device->busid == id)
-			return device;
-		device = device->next;
-	}
-	return NULL;
-}
-
-/* searches in the buf from *pos the next ':'.
- * returns:
- *     0 if found (with *pos = where)
- *   < 0 if an error occured
- *   > 0 if the end of buf is reached
- */
-static int i2c_mux_search_next (int *pos, uchar	*buf, int len)
-{
-	while ((buf[*pos] != ':') && (*pos < len)) {
-		*pos += 1;
-	}
-	if (*pos >= len)
-		return 1;
-	if (buf[*pos] != ':')
-		return -1;
-	return 0;
-}
-
-static int i2c_mux_get_busid (void)
-{
-	int	tmp = i2c_mux_busid;
-
-	i2c_mux_busid ++;
-	return tmp;
-}
-
-/* Analyses a Muxstring and immediately sends the
-   commands to the muxes. Runs from flash.
- */
-int i2c_mux_ident_muxstring_f (uchar *buf)
-{
-	int	pos = 0;
-	int	oldpos;
-	int	ret = 0;
-	int	len = strlen((char *)buf);
-	int	chip;
-	uchar	channel;
-	int	was = 0;
-
-	while (ret == 0) {
-		oldpos = pos;
-		/* search name */
-		ret = i2c_mux_search_next(&pos, buf, len);
-		if (ret != 0)
-			printf ("ERROR\n");
-		/* search address */
-		pos ++;
-		oldpos = pos;
-		ret = i2c_mux_search_next(&pos, buf, len);
-		if (ret != 0)
-			printf ("ERROR\n");
-		buf[pos] = 0;
-		chip = simple_strtoul((char *)&buf[oldpos], NULL, 16);
-		buf[pos] = ':';
-		/* search channel */
-		pos ++;
-		oldpos = pos;
-		ret = i2c_mux_search_next(&pos, buf, len);
-		if (ret < 0)
-			printf ("ERROR\n");
-		was = 0;
-		if (buf[pos] != 0) {
-			buf[pos] = 0;
-			was = 1;
-		}
-		channel = simple_strtoul((char *)&buf[oldpos], NULL, 16);
-		if (was)
-			buf[pos] = ':';
-		if (i2c_write(chip, 0, 0, &channel, 1) != 0) {
-			printf ("Error setting Mux: chip:%x channel: \
-				%x\n", chip, channel);
-			return -1;
-		}
-		pos ++;
-		oldpos = pos;
-
-	}
-	i2c_init_board();
-
-	return 0;
-}
-
-/* Analyses a Muxstring and if this String is correct
- * adds a new I2C Bus.
- */
-I2C_MUX_DEVICE *i2c_mux_ident_muxstring (uchar *buf)
-{
-	I2C_MUX_DEVICE	*device;
-	I2C_MUX		*mux;
-	int	pos = 0;
-	int	oldpos;
-	int	ret = 0;
-	int	len = strlen((char *)buf);
-	int	was = 0;
-
-	device = (I2C_MUX_DEVICE *)malloc (sizeof(I2C_MUX_DEVICE));
-	device->mux = NULL;
-	device->busid = i2c_mux_get_busid ();
-	device->next = NULL;
-	while (ret == 0) {
-		mux = (I2C_MUX *)malloc (sizeof(I2C_MUX));
-		mux->next = NULL;
-		/* search name of mux */
-		oldpos = pos;
-		ret = i2c_mux_search_next(&pos, buf, len);
-		if (ret != 0)
-			printf ("%s no name.\n", __FUNCTION__);
-		mux->name = (char *)malloc (pos - oldpos + 1);
-		memcpy (mux->name, &buf[oldpos], pos - oldpos);
-		mux->name[pos - oldpos] = 0;
-		/* search address */
-		pos ++;
-		oldpos = pos;
-		ret = i2c_mux_search_next(&pos, buf, len);
-		if (ret != 0)
-			printf ("%s no mux address.\n", __FUNCTION__);
-		buf[pos] = 0;
-		mux->chip = simple_strtoul((char *)&buf[oldpos], NULL, 16);
-		buf[pos] = ':';
-		/* search channel */
-		pos ++;
-		oldpos = pos;
-		ret = i2c_mux_search_next(&pos, buf, len);
-		if (ret < 0)
-			printf ("%s no mux channel.\n", __FUNCTION__);
-		was = 0;
-		if (buf[pos] != 0) {
-			buf[pos] = 0;
-			was = 1;
-		}
-		mux->channel = simple_strtoul((char *)&buf[oldpos], NULL, 16);
-		if (was)
-			buf[pos] = ':';
-		if (device->mux == NULL)
-			device->mux = mux;
-		else {
-			I2C_MUX		*muxtmp = device->mux;
-			while (muxtmp->next != NULL) {
-				muxtmp = muxtmp->next;
-			}
-			muxtmp->next = mux;
-		}
-		pos ++;
-		oldpos = pos;
-	}
-	if (ret > 0) {
-		/* Add Device */
-		i2c_mux_add_device (device);
-		return device;
-	}
-
-	return NULL;
-}
-
-int i2x_mux_select_mux(int bus)
-{
-	I2C_MUX_DEVICE  *dev;
-	I2C_MUX		*mux;
-
-	if ((gd->flags & GD_FLG_RELOC) != GD_FLG_RELOC) {
-		/* select Default Mux Bus */
-#if defined(CONFIG_SYS_I2C_IVM_BUS)
-		i2c_mux_ident_muxstring_f ((uchar *)CONFIG_SYS_I2C_IVM_BUS);
-#else
-		{
-		unsigned char *buf;
-		buf = (unsigned char *) getenv("EEprom_ivm");
-		if (buf != NULL)
-			i2c_mux_ident_muxstring_f (buf);
-		}
-#endif
-		return 0;
-	}
-	dev = i2c_mux_search_device(bus);
-	if (dev == NULL)
-		return -1;
-
-	mux = dev->mux;
-	while (mux != NULL) {
-		/* do deblocking on each level of mux, before mux config */
-		i2c_init_board();
-		if (i2c_write(mux->chip, 0, 0, &mux->channel, 1) != 0) {
-			printf ("Error setting Mux: chip:%x channel: \
-				%x\n", mux->chip, mux->channel);
-			return -1;
-		}
-		mux = mux->next;
-	}
-	/* do deblocking on each level of mux and after mux config */
-	i2c_init_board();
-	return 0;
-}
-#endif /* CONFIG_I2C_MUX */
diff --git a/common/env_eeprom.c b/common/env_eeprom.c
index fbd459a..21226bf 100644
--- a/common/env_eeprom.c
+++ b/common/env_eeprom.c
@@ -49,41 +49,17 @@ static int eeprom_bus_read(unsigned dev_addr, unsigned offset,
 #if defined(CONFIG_I2C_ENV_EEPROM_BUS)
 	int old_bus = i2c_get_bus_num();
 
-#if defined(CONFIG_SYS_I2C)
 	if (old_bus != CONFIG_I2C_ENV_EEPROM_BUS)
 		i2c_set_bus_num(CONFIG_I2C_ENV_EEPROM_BUS);
-#else
-	if (gd->flags & GD_FLG_RELOC) {
-		if (env_eeprom_bus == -1) {
-			I2C_MUX_DEVICE *dev = NULL;
-			dev = i2c_mux_ident_muxstring(
-				(uchar *)CONFIG_I2C_ENV_EEPROM_BUS);
-			if (dev != NULL)
-				env_eeprom_bus = dev->busid;
-			else
-				printf("error adding env eeprom bus.\n");
-		}
-		if (old_bus != env_eeprom_bus) {
-			i2c_set_bus_num(env_eeprom_bus);
-			old_bus = env_eeprom_bus;
-		}
-	} else {
-		rcode = i2c_mux_ident_muxstring_f(
-				(uchar *)CONFIG_I2C_ENV_EEPROM_BUS);
-	}
-#endif
 #endif
 
 	rcode = eeprom_read(dev_addr, offset, buffer, cnt);
 
 #if defined(CONFIG_I2C_ENV_EEPROM_BUS)
-#if defined(CONFIG_SYS_I2C)
-	if (old_bus != CONFIG_I2C_ENV_EEPROM_BUS)
-#else
 	if (old_bus != env_eeprom_bus)
-#endif
 		i2c_set_bus_num(old_bus);
 #endif
+
 	return rcode;
 }
 
@@ -94,14 +70,12 @@ static int eeprom_bus_write(unsigned dev_addr, unsigned offset,
 #if defined(CONFIG_I2C_ENV_EEPROM_BUS)
 	int old_bus = i2c_get_bus_num();
 
-#if defined(CONFIG_SYS_I2C)
 	if (old_bus != CONFIG_I2C_ENV_EEPROM_BUS)
 		i2c_set_bus_num(CONFIG_I2C_ENV_EEPROM_BUS);
-#else
-	rcode = i2c_mux_ident_muxstring_f((uchar *)CONFIG_I2C_ENV_EEPROM_BUS);
-#endif
 #endif
+
 	rcode = eeprom_write(dev_addr, offset, buffer, cnt);
+
 #if defined(CONFIG_I2C_ENV_EEPROM_BUS)
 	i2c_set_bus_num(old_bus);
 #endif
diff --git a/include/i2c.h b/include/i2c.h
index f532a14..a8074ac 100644
--- a/include/i2c.h
+++ b/include/i2c.h
@@ -197,27 +197,6 @@ void i2c_init_board(void);
 void i2c_board_late_init(void);
 #endif
 
-#if defined(CONFIG_I2C_MUX)
-
-typedef struct _mux {
-	uchar	chip;
-	uchar	channel;
-	char	*name;
-	struct _mux	*next;
-} I2C_MUX;
-
-typedef struct _mux_device {
-	int	busid;
-	I2C_MUX	*mux;	/* List of muxes, to reach the device */
-	struct _mux_device	*next;
-} I2C_MUX_DEVICE;
-
-I2C_MUX_DEVICE	*i2c_mux_search_device(int id);
-I2C_MUX_DEVICE *i2c_mux_ident_muxstring (uchar *buf);
-int i2x_mux_select_mux(int bus);
-int i2c_mux_ident_muxstring_f (uchar *buf);
-#endif
-
 #ifdef CONFIG_SYS_I2C
 /*
  * i2c_get_bus_num: