arm, davinci: da850/dm365 lowlevel cleanup

- Cleanup a lot of fix values, and use defines instead.
- Also make some values configurable through the board config
  file.
- delete the NAND_SPL code for da850, as it is not used actually
- remove the asm code

Signed-off-by: Heiko Schocher <hs@denx.de>
Cc: Wolfgang Denk <hs@denx.de>
Cc: Sandeep Paulraj <s-paulraj@ti.com>
Cc: Albert ARIBAUD <albert.u.boot@aribaud.net>
Cc: Tom Rini <tom.rini@gmail.com>
Cc: Christian Riesch <christian.riesch@omicron.at>
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>

8 files changed, 113 insertions, 125 deletions

diff --git a/arch/arm/cpu/arm926ejs/davinci/da850_lowlevel.c b/arch/arm/cpu/arm926ejs/davinci/da850_lowlevel.c
index 327ff97..c7ec70f 100644
--- a/arch/arm/cpu/arm926ejs/davinci/da850_lowlevel.c
+++ b/arch/arm/cpu/arm926ejs/davinci/da850_lowlevel.c
@@ -29,6 +29,7 @@
 #include <asm/arch/hardware.h>
 #include <asm/arch/ddr2_defs.h>
 #include <asm/arch/emif_defs.h>
+#include <asm/arch/pll_defs.h>
 
 void da850_waitloop(unsigned long loopcnt)
 {
@@ -42,18 +43,18 @@ int da850_pll_init(struct davinci_pllc_regs *reg, unsigned long pllmult)
 {
 	if (reg == davinci_pllc0_regs)
 		/* Unlock PLL registers. */
-		clrbits_le32(&davinci_syscfg_regs->cfgchip0, 0x00000010);
+		clrbits_le32(&davinci_syscfg_regs->cfgchip0, PLL_MASTER_LOCK);
 
 	/*
 	 * Set PLLENSRC '0',bit 5, PLL Enable(PLLEN) selection is controlled
 	 * through MMR
 	 */
-	clrbits_le32(&reg->pllctl, 0x00000020);
+	clrbits_le32(&reg->pllctl, PLLCTL_PLLENSRC);
 	/* PLLCTL.EXTCLKSRC bit 9 should be left at 0 for Freon */
-	clrbits_le32(&reg->pllctl, 0x00000200);
+	clrbits_le32(&reg->pllctl, PLLCTL_EXTCLKSRC);
 
 	/* Set PLLEN=0 => PLL BYPASS MODE */
-	clrbits_le32(&reg->pllctl, 0x00000001);
+	clrbits_le32(&reg->pllctl, PLLCTL_PLLEN);
 
 	da850_waitloop(150);
 
@@ -62,42 +63,43 @@ int da850_pll_init(struct davinci_pllc_regs *reg, unsigned long pllmult)
 		 * Select the Clock Mode bit 8 as External Clock or On Chip
 		 * Oscilator
 		 */
-		dv_maskbits(&reg->pllctl, 0xFFFFFEFF);
-		setbits_le32(&reg->pllctl, (CONFIG_SYS_DV_CLKMODE << 8));
+		dv_maskbits(&reg->pllctl, ~PLLCTL_RES_9);
+		setbits_le32(&reg->pllctl,
+			(CONFIG_SYS_DV_CLKMODE << PLLCTL_CLOCK_MODE_SHIFT));
 	}
 
 	/* Clear PLLRST bit to reset the PLL */
-	clrbits_le32(&reg->pllctl, 0x00000008);
+	clrbits_le32(&reg->pllctl, PLLCTL_PLLRST);
 
 	/* Disable the PLL output */
-	setbits_le32(&reg->pllctl, 0x00000010);
+	setbits_le32(&reg->pllctl, PLLCTL_PLLDIS);
 
 	/* PLL initialization sequence */
 	/*
 	 * Power up the PLL- PWRDN bit set to 0 to bring the PLL out of
 	 * power down bit
 	 */
-	clrbits_le32(&reg->pllctl, 0x00000002);
+	clrbits_le32(&reg->pllctl, PLLCTL_PLLPWRDN);
 
 	/* Enable the PLL from Disable Mode PLLDIS bit to 0 */
-	clrbits_le32(&reg->pllctl, 0x00000010);
+	clrbits_le32(&reg->pllctl, PLLCTL_PLLDIS);
 
 	/* Program the required multiplier value in PLLM */
 	writel(pllmult, &reg->pllm);
 
 	/* program the postdiv */
 	if (reg == davinci_pllc0_regs)
-		writel((0x8000 | CONFIG_SYS_DA850_PLL0_POSTDIV),
+		writel((PLL_POSTDEN | CONFIG_SYS_DA850_PLL0_POSTDIV),
 			&reg->postdiv);
 	else
-		writel((0x8000 | CONFIG_SYS_DA850_PLL1_POSTDIV),
+		writel((PLL_POSTDEN | CONFIG_SYS_DA850_PLL1_POSTDIV),
 			&reg->postdiv);
 
 	/*
 	 * Check for the GOSTAT bit in PLLSTAT to clear to 0 to indicate that
 	 * no GO operation is currently in progress
 	 */
-	while ((readl(&reg->pllstat) & 0x1) == 1)
+	while ((readl(&reg->pllstat) & PLLCMD_GOSTAT) == PLLCMD_GOSTAT)
 		;
 
 	if (reg == davinci_pllc0_regs) {
@@ -118,20 +120,20 @@ int da850_pll_init(struct davinci_pllc_regs *reg, unsigned long pllmult)
 	 * Set the GOSET bit in PLLCMD to 1 to initiate a new divider
 	 * transition.
 	 */
-	setbits_le32(&reg->pllcmd, 0x01);
+	setbits_le32(&reg->pllcmd, PLLCMD_GOSTAT);
 
 	/*
 	 * Wait for the GOSTAT bit in PLLSTAT to clear to 0
 	 * (completion of phase alignment).
 	 */
-	while ((readl(&reg->pllstat) & 0x1) == 1)
+	while ((readl(&reg->pllstat) & PLLCMD_GOSTAT) == PLLCMD_GOSTAT)
 		;
 
 	/* Wait for PLL to reset properly. See PLL spec for PLL reset time */
 	da850_waitloop(200);
 
 	/* Set the PLLRST bit in PLLCTL to 1 to bring the PLL out of reset */
-	setbits_le32(&reg->pllctl, 0x00000008);
+	setbits_le32(&reg->pllctl, PLLCTL_PLLRST);
 
 	/* Wait for PLL to lock. See PLL spec for PLL lock time */
 	da850_waitloop(2400);
@@ -140,7 +142,7 @@ int da850_pll_init(struct davinci_pllc_regs *reg, unsigned long pllmult)
 	 * Set the PLLEN bit in PLLCTL to 1 to remove the PLL from bypass
 	 * mode
 	 */
-	setbits_le32(&reg->pllctl, 0x00000001);
+	setbits_le32(&reg->pllctl, PLLCTL_PLLEN);
 
 
 	/*
@@ -148,12 +150,13 @@ int da850_pll_init(struct davinci_pllc_regs *reg, unsigned long pllmult)
 	 * run off SYSCLK
 	 */
 	if (reg == davinci_pllc0_regs)
-		dv_maskbits(&davinci_syscfg_regs->cfgchip3, 0xFFFFFFF8);
+		dv_maskbits(&davinci_syscfg_regs->cfgchip3,
+			~(PLL_SCSCFG3_DIV45PENA | PLL_SCSCFG3_EMA_CLKSRC));
 
 	return 0;
 }
 
-int da850_ddr_setup(unsigned int freq)
+int da850_ddr_setup(void)
 {
 	unsigned long	tmp;
 
@@ -197,8 +200,8 @@ int da850_ddr_setup(unsigned int freq)
 	 * the timing registers
 	 */
 	tmp = CONFIG_SYS_DA850_DDR2_SDBCR;
-	tmp &= ~(0x1 << DV_DDR_SDCR_BOOTUNLOCK_SHIFT);
-	tmp |= (0x1 << DV_DDR_SDCR_TIMUNLOCK_SHIFT);
+	tmp &= ~DV_DDR_BOOTUNLOCK;
+	tmp |= DV_DDR_TIMUNLOCK;
 	writel(tmp, &dv_ddr2_regs_ctrl->sdbcr);
 
 	/* write memory configuration and timing */
@@ -207,7 +210,7 @@ int da850_ddr_setup(unsigned int freq)
 	writel(CONFIG_SYS_DA850_DDR2_SDTIMR2, &dv_ddr2_regs_ctrl->sdtimr2);
 
 	/* clear the TIMUNLOCK bit and write the value of the CL field */
-	tmp &= ~(0x1 << DV_DDR_SDCR_TIMUNLOCK_SHIFT);
+	tmp &= ~DV_DDR_TIMUNLOCK;
 	writel(tmp, &dv_ddr2_regs_ctrl->sdbcr);
 
 	/*
@@ -225,8 +228,9 @@ int da850_ddr_setup(unsigned int freq)
 	lpsc_on(DAVINCI_LPSC_DDR_EMIF);
 
 	/* disable self refresh */
-	clrbits_le32(&dv_ddr2_regs_ctrl->sdrcr, 0xc0000000);
-	writel(0x30, &dv_ddr2_regs_ctrl->pbbpr);
+	clrbits_le32(&dv_ddr2_regs_ctrl->sdrcr,
+		DV_DDR_SDRCR_LPMODEN | DV_DDR_SDRCR_LPMODEN);
+	writel(CONFIG_SYS_DA850_DDR2_PBBPR, &dv_ddr2_regs_ctrl->pbbpr);
 
 	return 0;
 }
@@ -244,57 +248,14 @@ void board_gpio_init(void)
 	return;
 }
 
-#if defined(CONFIG_NAND_SPL)
-void nand_boot(void)
-{
-	__attribute__((noreturn)) void (*uboot)(void);
-
-	/* copy image from NOR to RAM */
-	memcpy((void *)CONFIG_SYS_NAND_U_BOOT_DST,
-		(void *)CONFIG_SYS_NAND_U_BOOT_OFFS,
-		CONFIG_SYS_NAND_U_BOOT_SIZE);
-
-	/* and jump to it ... */
-	uboot = (void *)CONFIG_SYS_NAND_U_BOOT_START;
-	(*uboot)();
-}
-#endif
-
-#if defined(CONFIG_NAND_SPL)
-void board_init_f(ulong bootflag)
-#else
 int arch_cpu_init(void)
-#endif
 {
-	/*
-	 * copied from arch/arm/cpu/arm926ejs/start.S
-	 *
-	 * flush v4 I/D caches
-	 */
-	asm("mov	r0, #0");
-	asm("mcr	p15, 0, r0, c7, c7, 0");	/* flush v3/v4 cache */
-	asm("mcr	p15, 0, r0, c8, c7, 0");	/* flush v4 TLB */
-
-	/*
-	 * disable MMU stuff and caches
-	 */
-	asm("mrc	p15, 0, r0, c1, c0, 0");
-	/* clear bits 13, 9:8 (--V- --RS) */
-	asm("bic	r0, r0, #0x00002300");
-	/* clear bits 7, 2:0 (B--- -CAM) */
-	asm("bic	r0, r0, #0x00000087");
-	/* set bit 2 (A) Align */
-	asm("orr	r0, r0, #0x00000002");
-	/* set bit 12 (I) I-Cache */
-	asm("orr	r0, r0, #0x00001000");
-	asm("mcr	p15, 0, r0, c1, c0, 0");
-
 	/* Unlock kick registers */
-	writel(0x83e70b13, &davinci_syscfg_regs->kick0);
-	writel(0x95a4f1e0, &davinci_syscfg_regs->kick1);
+	writel(DV_SYSCFG_KICK0_UNLOCK, &davinci_syscfg_regs->kick0);
+	writel(DV_SYSCFG_KICK1_UNLOCK, &davinci_syscfg_regs->kick1);
 
 	dv_maskbits(&davinci_syscfg_regs->suspsrc,
-		((1 << 27) | (1 << 22) | (1 << 20) | (1 << 5) |	(1 << 16)));
+		CONFIG_SYS_DA850_SYSCFG_SUSPSRC);
 
 	/* Setup Pinmux */
 	da850_pinmux_ctl(0, 0xFFFFFFFF, CONFIG_SYS_DA850_PINMUX0);
@@ -326,10 +287,14 @@ int arch_cpu_init(void)
 	board_gpio_init();
 
 	/* setup CSn config */
+#if defined(CONFIG_SYS_DA850_CS2CFG)
 	writel(CONFIG_SYS_DA850_CS2CFG, &davinci_emif_regs->ab1cr);
+#endif
+#if defined(CONFIG_SYS_DA850_CS3CFG)
 	writel(CONFIG_SYS_DA850_CS3CFG, &davinci_emif_regs->ab2cr);
+#endif
 
-	lpsc_on(DAVINCI_LPSC_UART2);
+	lpsc_on(CONFIG_SYS_DA850_LPSC_UART);
 	NS16550_init((NS16550_t)(CONFIG_SYS_NS16550_COM1),
 			CONFIG_SYS_NS16550_CLK / 16 / CONFIG_BAUDRATE);
 
@@ -337,17 +302,10 @@ int arch_cpu_init(void)
 	 * Fix Power and Emulation Management Register
 	 * see sprufw3a.pdf page 37 Table 24
 	 */
-	writel(readl((CONFIG_SYS_NS16550_COM1 + 0x30)) | 0x00006001,
-		(CONFIG_SYS_NS16550_COM1 + 0x30));
-#if defined(CONFIG_NAND_SPL)
-	puts("ddr init\n");
-	da850_ddr_setup(132);
+	writel((DAVINCI_UART_PWREMU_MGMT_FREE | DAVINCI_UART_PWREMU_MGMT_URRST |
+		DAVINCI_UART_PWREMU_MGMT_UTRST),
+	       &davinci_uart2_ctrl_regs->pwremu_mgmt);
 
-	puts("boot u-boot ...\n");
-
-	nand_boot();
-#else
-	da850_ddr_setup(132);
+	da850_ddr_setup();
 	return 0;
-#endif
 }
diff --git a/arch/arm/cpu/arm926ejs/davinci/dm365_lowlevel.c b/arch/arm/cpu/arm926ejs/davinci/dm365_lowlevel.c
index 3772e64..6e998de 100644
--- a/arch/arm/cpu/arm926ejs/davinci/dm365_lowlevel.c
+++ b/arch/arm/cpu/arm926ejs/davinci/dm365_lowlevel.c
@@ -45,7 +45,8 @@ int dm365_pll1_init(unsigned long pllmult, unsigned long prediv)
 	clrbits_le32(&dv_pll0_regs->pllctl, PLLCTL_PLLPWRDN);
 
 	clrbits_le32(&dv_pll0_regs->pllctl, PLLCTL_RES_9);
-	setbits_le32(&dv_pll0_regs->pllctl, clksrc << 8);
+	setbits_le32(&dv_pll0_regs->pllctl,
+		clksrc << PLLCTL_CLOCK_MODE_SHIFT);
 
 	/*
 	 * Set PLLENSRC '0', PLL Enable(PLLEN) selection is controlled
@@ -82,7 +83,7 @@ int dm365_pll1_init(unsigned long pllmult, unsigned long prediv)
 	writel(PLLSECCTL_STOPMODE | PLLSECCTL_TINITZ, &dv_pll0_regs->secctl);
 
 	/* Program the PostDiv for PLL1 */
-	writel(0x8000, &dv_pll0_regs->postdiv);
+	writel(PLL_POSTDEN, &dv_pll0_regs->postdiv);
 
 	/* Post divider setting for PLL1 */
 	writel(CONFIG_SYS_DM36x_PLL1_PLLDIV1, &dv_pll0_regs->plldiv1);
@@ -126,7 +127,8 @@ int dm365_pll2_init(unsigned long pllm, unsigned long prediv)
 	 * VDB has input on MXI pin
 	 */
 	clrbits_le32(&dv_pll1_regs->pllctl, PLLCTL_RES_9);
-	setbits_le32(&dv_pll1_regs->pllctl, clksrc << 8);
+	setbits_le32(&dv_pll1_regs->pllctl,
+		clksrc << PLLCTL_CLOCK_MODE_SHIFT);
 
 	/*
 	 * Set PLLENSRC '0', PLL Enable(PLLEN) selection is controlled
@@ -151,7 +153,7 @@ int dm365_pll2_init(unsigned long pllm, unsigned long prediv)
 	writel(pllm, &dv_pll1_regs->pllm);
 	writel(prediv, &dv_pll1_regs->prediv);
 
-	writel(0x8000, &dv_pll1_regs->postdiv);
+	writel(PLL_POSTDEN, &dv_pll1_regs->postdiv);
 
 	/* Assert TENABLE = 1, TENABLEDIV = 1, TINITZ = 1 */
 	writel(PLLSECCTL_STOPMODE | PLLSECCTL_TENABLEDIV | PLLSECCTL_TENABLE |
@@ -261,21 +263,23 @@ void dm365_vpss_sync_reset(void)
 		VPSS_CLK_CTL_VPSS_CLKMD);
 
 	/* LPSC SyncReset DDR Clock Enable */
-	writel(((readl(&dv_psc_regs->mdctl[47]) & ~PSC_MD_STATE_MSK) |
-		PSC_SYNCRESET), &dv_psc_regs->mdctl[47]);
+	writel(((readl(&dv_psc_regs->mdctl[DAVINCI_LPSC_VPSSMASTER]) &
+		~PSC_MD_STATE_MSK) | PSC_SYNCRESET),
+		&dv_psc_regs->mdctl[DAVINCI_LPSC_VPSSMASTER]);
 
 	writel((1 << PdNum), &dv_psc_regs->ptcmd);
 
 	while (!(((readl(&dv_psc_regs->ptstat) >> PdNum) & PSC_GOSTAT) == 0))
 		;
-	while (!((readl(&dv_psc_regs->mdstat[47]) &  PSC_MD_STATE_MSK) ==
-		PSC_SYNCRESET))
+	while (!((readl(&dv_psc_regs->mdstat[DAVINCI_LPSC_VPSSMASTER]) &
+		PSC_MD_STATE_MSK) == PSC_SYNCRESET))
 		;
 }
 
 void dm365_por_reset(void)
 {
-	if (readl(&dv_pll0_regs->rstype) & 3)
+	if (readl(&dv_pll0_regs->rstype) &
+		(PLL_RSTYPE_POR | PLL_RSTYPE_XWRST))
 		dm365_vpss_sync_reset();
 }
 
@@ -291,19 +295,20 @@ void dm365_psc_init(void)
 
 	for (lpscgroup = lpscmin; lpscgroup <= lpscmax; lpscgroup++) {
 		if (lpscgroup == 0) {
-			lpsc_start = 0; /* Enabling LPSC 3 to 28 SCR first */
-			lpsc_end   = 28;
+			/* Enabling LPSC 3 to 28 SCR first */
+			lpsc_start = DAVINCI_LPSC_VPSSMSTR;
+			lpsc_end   = DAVINCI_LPSC_TIMER1;
 		} else if (lpscgroup == 1) { /* Skip locked LPSCs [29-37] */
-			lpsc_start = 38;
-			lpsc_end   = 47;
+			lpsc_start = DAVINCI_LPSC_CFG5;
+			lpsc_end   = DAVINCI_LPSC_VPSSMASTER;
 		} else {
-			lpsc_start = 50;
-			lpsc_end   = 51;
+			lpsc_start = DAVINCI_LPSC_MJCP;
+			lpsc_end   = DAVINCI_LPSC_HDVICP;
 		}
 
 		/* NEXT=0x3, Enable LPSC's */
 		for (i = lpsc_start; i <= lpsc_end; i++)
-			setbits_le32(&dv_psc_regs->mdctl[i], 0x3);
+			setbits_le32(&dv_psc_regs->mdctl[i], PSC_ENABLE);
 
 		/*
 		 * Program goctl to start transition sequence for LPSCs
@@ -322,7 +327,7 @@ void dm365_psc_init(void)
 		/* Wait for MODSTAT = ENABLE from LPSC's */
 		for (i = lpsc_start; i <= lpsc_end; i++)
 			while (!((readl(&dv_psc_regs->mdstat[i]) &
-				PSC_MD_STATE_MSK) == 0x3))
+				PSC_MD_STATE_MSK) == PSC_ENABLE))
 				;
 	}
 }
@@ -332,7 +337,7 @@ static void dm365_emif_init(void)
 	writel(CONFIG_SYS_DM36x_AWCCR, &davinci_emif_regs->awccr);
 	writel(CONFIG_SYS_DM36x_AB1CR, &davinci_emif_regs->ab1cr);
 
-	setbits_le32(&davinci_emif_regs->nandfcr, 1);
+	setbits_le32(&davinci_emif_regs->nandfcr, DAVINCI_NANDFCR_CS2NAND);
 
 	writel(CONFIG_SYS_DM36x_AB2CR, &davinci_emif_regs->ab2cr);
 
@@ -361,31 +366,12 @@ int post_log(char *format, ...)
 
 void dm36x_lowlevel_init(ulong bootflag)
 {
-	/*
-	 * copied from arch/arm/cpu/arm926ejs/start.S
-	 *
-	 * flush v4 I/D caches
-	 */
-	asm("mov	r0, #0");
-	asm("mcr	p15, 0, r0, c7, c7, 0");	/* flush v3/v4 cache */
-	asm("mcr	p15, 0, r0, c8, c7, 0");	/* flush v4 TLB */
-
-	/*
-	 * disable MMU stuff and caches
-	 */
-	asm("mrc	p15, 0, r0, c1, c0, 0");
-	/* clear bits 13, 9:8 (--V- --RS) */
-	asm("bic	r0, r0, #0x00002300");
-	/* clear bits 7, 2:0 (B--- -CAM) */
-	asm("bic	r0, r0, #0x00000087");
-	/* set bit 2 (A) Align */
-	asm("orr	r0, r0, #0x00000002");
-	/* set bit 12 (I) I-Cache */
-	asm("orr	r0, r0, #0x00001000");
-	asm("mcr	p15, 0, r0, c1, c0, 0");
+	struct davinci_uart_ctrl_regs *davinci_uart_ctrl_regs =
+		(struct davinci_uart_ctrl_regs *)(CONFIG_SYS_NS16550_COM1 +
+		DAVINCI_UART_CTRL_BASE);
 
 	/* Mask all interrupts */
-	writel(0x04, &dv_aintc_regs->intctl);
+	writel(DV_AINTC_INTCTL_IDMODE, &dv_aintc_regs->intctl);
 	writel(0x0, &dv_aintc_regs->eabase);
 	writel(0x0, &dv_aintc_regs->eint0);
 	writel(0x0, &dv_aintc_regs->eint1);
@@ -422,7 +408,10 @@ void dm36x_lowlevel_init(ulong bootflag)
 	 * Fix Power and Emulation Management Register
 	 * see sprufh2.pdf page 38 Table 22
 	 */
-	writel(0x0000e003, (CONFIG_SYS_NS16550_COM1 + 0x30));
+	writel((DAVINCI_UART_PWREMU_MGMT_FREE | DAVINCI_UART_PWREMU_MGMT_URRST |
+		DAVINCI_UART_PWREMU_MGMT_UTRST),
+	       &davinci_uart_ctrl_regs->pwremu_mgmt);
+
 	puts("ddr init\n");
 	dm365_ddr_setup();
 
diff --git a/arch/arm/include/asm/arch-davinci/aintc_defs.h b/arch/arm/include/asm/arch-davinci/aintc_defs.h
index 8f37053..38f814c 100644
--- a/arch/arm/include/asm/arch-davinci/aintc_defs.h
+++ b/arch/arm/include/asm/arch-davinci/aintc_defs.h
@@ -47,4 +47,6 @@ struct dv_aintc_regs {
 
 #define dv_aintc_regs ((struct dv_aintc_regs *)DAVINCI_ARM_INTC_BASE)
 
+#define DV_AINTC_INTCTL_IDMODE	(1 << 2)
+
 #endif /* _DV_AINTC_DEFS_H_ */
diff --git a/arch/arm/include/asm/arch-davinci/da850_lowlevel.h b/arch/arm/include/asm/arch-davinci/da850_lowlevel.h
index 22a92a3..e489c47 100644
--- a/arch/arm/include/asm/arch-davinci/da850_lowlevel.h
+++ b/arch/arm/include/asm/arch-davinci/da850_lowlevel.h
@@ -36,7 +36,7 @@ void da850_waitloop(unsigned long loopcnt);
 int da850_pll_init(struct davinci_pllc_regs *reg, unsigned long pllmult);
 void da850_lpc_transition(unsigned char pscnum, unsigned char module,
 		unsigned char domain, unsigned char state);
-int da850_ddr_setup(unsigned int freq);
+int da850_ddr_setup(void);
 void da850_psc_init(void);
 void da850_pinmux_ctl(unsigned long offset, unsigned long mask,
 	unsigned long value);
diff --git a/arch/arm/include/asm/arch-davinci/ddr2_defs.h b/arch/arm/include/asm/arch-davinci/ddr2_defs.h
index 1b9430c..4f943b8 100644
--- a/arch/arm/include/asm/arch-davinci/ddr2_defs.h
+++ b/arch/arm/include/asm/arch-davinci/ddr2_defs.h
@@ -63,6 +63,7 @@ struct dv_ddr2_regs_ctrl {
 
 #define DV_DDR_SDTMR2_RASMAX_SHIFT	27
 #define DV_DDR_SDTMR2_XP_SHIFT	25
+#define DV_DDR_SDTMR2_ODT_SHIFT	23
 #define DV_DDR_SDTMR2_XSNR_SHIFT	16
 #define DV_DDR_SDTMR2_XSRD_SHIFT	8
 #define DV_DDR_SDTMR2_RTP_SHIFT	5
@@ -84,6 +85,9 @@ struct dv_ddr2_regs_ctrl {
 #define DV_DDR_SDCR_IBANK_SHIFT	4
 #define DV_DDR_SDCR_PAGESIZE_SHIFT	0
 
+#define DV_DDR_SDRCR_LPMODEN	(1 << 31)
+#define DV_DDR_SDRCR_MCLKSTOPEN	(1 << 30)
+
 #define DV_DDR_SRCR_LPMODEN_SHIFT	31
 #define DV_DDR_SRCR_MCLKSTOPEN_SHIFT	30
 
diff --git a/arch/arm/include/asm/arch-davinci/emif_defs.h b/arch/arm/include/asm/arch-davinci/emif_defs.h
index b48ec17..b9e78a5 100644
--- a/arch/arm/include/asm/arch-davinci/emif_defs.h
+++ b/arch/arm/include/asm/arch-davinci/emif_defs.h
@@ -70,6 +70,7 @@ struct davinci_emif_regs {
 #define DAVINCI_NANDFCR_1BIT_ECC_START(n)		(1 << (8 + (n-2)))
 #define DAVINCI_NANDFCR_4BIT_ECC_START			(1 << 12)
 #define DAVINCI_NANDFCR_4BIT_CALC_START			(1 << 13)
+#define DAVINCI_NANDFCR_CS2NAND				(1 << 0)
 
 /* Chip Select setup */
 #define DAVINCI_ABCR_STROBE_SELECT			(1 << 31)
diff --git a/arch/arm/include/asm/arch-davinci/hardware.h b/arch/arm/include/asm/arch-davinci/hardware.h
index ee8fd43..f80f312 100644
--- a/arch/arm/include/asm/arch-davinci/hardware.h
+++ b/arch/arm/include/asm/arch-davinci/hardware.h
@@ -230,6 +230,9 @@ typedef volatile unsigned int *	dv_reg_p;
 #define DAVINCI_LPSC_CFG5		38
 #define DAVINCI_LPSC_GEM		39
 #define DAVINCI_LPSC_IMCOP		40
+#define DAVINCI_LPSC_VPSSMASTER		47
+#define DAVINCI_LPSC_MJCP		50
+#define DAVINCI_LPSC_HDVICP		51
 
 #define DAVINCI_DM646X_LPSC_EMAC	14
 #define DAVINCI_DM646X_LPSC_UART0	26
@@ -385,6 +388,20 @@ struct davinci_psc_regs {
 #define PINMUX3				0x01c4000c
 #define PINMUX4				0x01c40010
 
+struct davinci_uart_ctrl_regs {
+	dv_reg	revid1;
+	dv_reg	res;
+	dv_reg	pwremu_mgmt;
+	dv_reg	mdr;
+};
+
+#define DAVINCI_UART_CTRL_BASE 0x28
+
+/* UART PWREMU_MGMT definitions */
+#define DAVINCI_UART_PWREMU_MGMT_FREE	(1 << 0)
+#define DAVINCI_UART_PWREMU_MGMT_URRST	(1 << 13)
+#define DAVINCI_UART_PWREMU_MGMT_UTRST	(1 << 14)
+
 #else /* CONFIG_SOC_DA8XX */
 
 struct davinci_pllc_regs {
@@ -492,6 +509,9 @@ struct davinci_syscfg1_regs {
 #define VTP_READY		(1 << 15)
 #define VTP_IOPWRDWN		(1 << 14)
 
+#define DV_SYSCFG_KICK0_UNLOCK	0x83e70b13
+#define DV_SYSCFG_KICK1_UNLOCK	0x95a4f1e0
+
 /* Interrupt controller */
 struct davinci_aintc_regs {
 	dv_reg	revid;
diff --git a/arch/arm/include/asm/arch-davinci/pll_defs.h b/arch/arm/include/asm/arch-davinci/pll_defs.h
index 5c30953..f1396e3 100644
--- a/arch/arm/include/asm/arch-davinci/pll_defs.h
+++ b/arch/arm/include/asm/arch-davinci/pll_defs.h
@@ -57,11 +57,24 @@ struct dv_pll_regs {
 	unsigned int	plldiv9;	/* 0x174 */
 };
 
+#define PLL_MASTER_LOCK	(1 << 4)
+
+#define PLLCTL_CLOCK_MODE_SHIFT	8
 #define PLLCTL_PLLEN	(1 << 0)
 #define PLLCTL_PLLPWRDN	(1 << 1)
 #define PLLCTL_PLLRST	(1 << 3)
+#define PLLCTL_PLLDIS	(1 << 4)
 #define PLLCTL_PLLENSRC	(1 << 5)
 #define PLLCTL_RES_9	(1 << 8)
+#define PLLCTL_EXTCLKSRC	(1 << 9)
+
+#define PLL_POSTDEN	(1 << 15)
+
+#define PLL_SCSCFG3_DIV45PENA	(1 << 2)
+#define PLL_SCSCFG3_EMA_CLKSRC	(1 << 1)
+
+#define PLL_RSTYPE_POR		(1 << 0)
+#define PLL_RSTYPE_XWRST	(1 << 1)
 
 #define PLLSECCTL_TINITZ	(1 << 16)
 #define PLLSECCTL_TENABLE	(1 << 17)
@@ -69,6 +82,7 @@ struct dv_pll_regs {
 #define PLLSECCTL_STOPMODE	(1 << 22)
 
 #define PLLCMD_GOSET		(1 << 0)
+#define PLLCMD_GOSTAT		(1 << 0)
 
 #define PLL0_LOCK		0x07000000
 #define PLL1_LOCK		0x07000000