Merge branch 'master' of git://git.denx.de/u-boot-arm

93 files changed, 2954 insertions, 1295 deletions

diff --git a/MAINTAINERS b/MAINTAINERS
index c209af5..aabd871 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -552,6 +552,7 @@ Stefano Babic <sbabic@denx.de>
 	polaris		xscale
 	trizepsiv	xscale
 	mx51evk		i.MX51
+ 	vision2		i.MX51
 
 Dirk Behme <dirk.behme@gmail.com>
 
@@ -803,6 +804,10 @@ Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
 
 	SFFSDR		ARM926EJS
 
+Matt Waddel <matt.waddel@linaro.org>
+
+	ca9x4_ct_vxp	ARM ARMV7 (Quad Core)
+
 Prafulla Wadaskar <prafulla@marvell.com>
 
 	mv88f6281gtw_ge	ARM926EJS (Kirkwood SoC)
diff --git a/MAKEALL b/MAKEALL
index 1b506d6..abceccd 100755
--- a/MAKEALL
+++ b/MAKEALL
@@ -489,6 +489,7 @@ LIST_ARM11="			\
 #########################################################################
 LIST_ARMV7="		\
 	am3517_evm		\
+	ca9x4_ct_vxp		\
 	devkit8000		\
 	mx51evk			\
 	omap3_beagle		\
diff --git a/arch/arm/cpu/arm1136/start.S b/arch/arm/cpu/arm1136/start.S
index 8b63192..494768e 100644
--- a/arch/arm/cpu/arm1136/start.S
+++ b/arch/arm/cpu/arm1136/start.S
@@ -235,8 +235,8 @@ stack_setup:
 copy_loop:
 	ldmia	r0!, {r9-r10}		/* copy from source address [r0]    */
 	stmia	r6!, {r9-r10}		/* copy to   target address [r1]    */
-	cmp	r0, r2			/* until source end addreee [r2]    */
-	ble	copy_loop
+	cmp	r0, r2			/* until source end address [r2]    */
+	blo	copy_loop
 
 #ifndef CONFIG_PRELOADER
 	/* fix got entries */
@@ -355,8 +355,8 @@ relocate:				/* relocate U-Boot to RAM	    */
 copy_loop:
 	ldmia	r0!, {r3-r10}		/* copy from source address [r0]    */
 	stmia	r1!, {r3-r10}		/* copy to   target address [r1]    */
-	cmp	r0, r2			/* until source end addreee [r2]    */
-	ble	copy_loop
+	cmp	r0, r2			/* until source end address [r2]    */
+	blo	copy_loop
 #endif	/* CONFIG_SKIP_RELOCATE_UBOOT */
 
 	/* Set up the stack						    */
diff --git a/arch/arm/cpu/arm1176/start.S b/arch/arm/cpu/arm1176/start.S
index e5e7913..6277ae0 100644
--- a/arch/arm/cpu/arm1176/start.S
+++ b/arch/arm/cpu/arm1176/start.S
@@ -284,8 +284,8 @@ stack_setup:
 copy_loop:
 	ldmia	r0!, {r9-r10}		/* copy from source address [r0]    */
 	stmia	r6!, {r9-r10}		/* copy to   target address [r1]    */
-	cmp	r0, r2			/* until source end addreee [r2]    */
-	ble	copy_loop
+	cmp	r0, r2			/* until source end address [r2]    */
+	blo	copy_loop
 
 #ifndef CONFIG_PRELOADER
 	/* fix got entries */
@@ -500,8 +500,8 @@ relocate:				/* relocate U-Boot to RAM	    */
 copy_loop:
 	ldmia	r0!, {r3-r10}		/* copy from source address [r0]    */
 	stmia	r1!, {r3-r10}		/* copy to   target address [r1]    */
-	cmp	r0, r2			/* until source end addreee [r2]    */
-	ble	copy_loop
+	cmp	r0, r2			/* until source end address [r2]    */
+	blo	copy_loop
 #endif	/* CONFIG_SKIP_RELOCATE_UBOOT */
 
 #ifdef CONFIG_ENABLE_MMU
@@ -559,7 +559,7 @@ clbss_l:
 	str	r2, [r0]		/* clear loop...                    */
 	add	r0, r0, #4
 	cmp	r0, r1
-	ble	clbss_l
+	blo	clbss_l
 
 #ifndef CONFIG_NAND_SPL
 	ldr	pc, _start_armboot
diff --git a/arch/arm/cpu/arm720t/start.S b/arch/arm/cpu/arm720t/start.S
index 0f5f6c4..6a8d57b 100644
--- a/arch/arm/cpu/arm720t/start.S
+++ b/arch/arm/cpu/arm720t/start.S
@@ -201,8 +201,8 @@ stack_setup:
 copy_loop:
 	ldmia	r0!, {r9-r10}		/* copy from source address [r0]    */
 	stmia	r6!, {r9-r10}		/* copy to   target address [r1]    */
-	cmp	r0, r2			/* until source end addreee [r2]    */
-	ble	copy_loop
+	cmp	r0, r2			/* until source end address [r2]    */
+	blo	copy_loop
 
 #ifndef CONFIG_PRELOADER
 	/* fix got entries */
@@ -318,8 +318,8 @@ relocate:				/* relocate U-Boot to RAM	    */
 copy_loop:
 	ldmia	r0!, {r3-r10}		/* copy from source address [r0]    */
 	stmia	r1!, {r3-r10}		/* copy to   target address [r1]    */
-	cmp	r0, r2			/* until source end addreee [r2]    */
-	ble	copy_loop
+	cmp	r0, r2			/* until source end address [r2]    */
+	blo	copy_loop
 
 #endif	/* CONFIG_SKIP_RELOCATE_UBOOT */
 
@@ -342,7 +342,7 @@ clear_bss:
 clbss_l:str	r2, [r0]		/* clear loop...		    */
 	add	r0, r0, #4
 	cmp	r0, r1
-	ble	clbss_l
+	blo	clbss_l
 
 	ldr	pc, _start_armboot
 
diff --git a/arch/arm/cpu/arm920t/start.S b/arch/arm/cpu/arm920t/start.S
index a079bb2..09ee815 100644
--- a/arch/arm/cpu/arm920t/start.S
+++ b/arch/arm/cpu/arm920t/start.S
@@ -246,8 +246,8 @@ stack_setup:
 copy_loop:
 	ldmia	r0!, {r9-r10}		/* copy from source address [r0]    */
 	stmia	r6!, {r9-r10}		/* copy to   target address [r1]    */
-	cmp	r0, r2			/* until source end addreee [r2]    */
-	ble	copy_loop
+	cmp	r0, r2			/* until source end address [r2]    */
+	blo	copy_loop
 
 #ifndef CONFIG_PRELOADER
 	/* fix got entries */
@@ -406,8 +406,8 @@ relocate:				/* relocate U-Boot to RAM	    */
 copy_loop:
 	ldmia	r0!, {r3-r10}		/* copy from source address [r0]    */
 	stmia	r1!, {r3-r10}		/* copy to   target address [r1]    */
-	cmp	r0, r2			/* until source end addreee [r2]    */
-	ble	copy_loop
+	cmp	r0, r2			/* until source end address [r2]    */
+	blo	copy_loop
 #endif	/* CONFIG_SKIP_RELOCATE_UBOOT */
 
 	/* Set up the stack						    */
@@ -429,7 +429,7 @@ clear_bss:
 clbss_l:str	r2, [r0]		/* clear loop...                    */
 	add	r0, r0, #4
 	cmp	r0, r1
-	ble	clbss_l
+	blo	clbss_l
 
 	ldr	pc, _start_armboot
 
diff --git a/arch/arm/cpu/arm925t/start.S b/arch/arm/cpu/arm925t/start.S
index c0a856d..f173400 100644
--- a/arch/arm/cpu/arm925t/start.S
+++ b/arch/arm/cpu/arm925t/start.S
@@ -238,8 +238,8 @@ stack_setup:
 copy_loop:
 	ldmia	r0!, {r9-r10}		/* copy from source address [r0]    */
 	stmia	r6!, {r9-r10}		/* copy to   target address [r1]    */
-	cmp	r0, r2			/* until source end addreee [r2]    */
-	ble	copy_loop
+	cmp	r0, r2			/* until source end address [r2]    */
+	blo	copy_loop
 
 #ifndef CONFIG_PRELOADER
 	/* fix got entries */
@@ -377,8 +377,8 @@ relocate:				/* relocate U-Boot to RAM	    */
 copy_loop:
 	ldmia	r0!, {r3-r10}		/* copy from source address [r0]    */
 	stmia	r1!, {r3-r10}		/* copy to   target address [r1]    */
-	cmp	r0, r2			/* until source end addreee [r2]    */
-	ble	copy_loop
+	cmp	r0, r2			/* until source end address [r2]    */
+	blo	copy_loop
 #endif	/* CONFIG_SKIP_RELOCATE_UBOOT */
 
 	/* Set up the stack						    */
@@ -400,7 +400,7 @@ clear_bss:
 clbss_l:str	r2, [r0]		/* clear loop...                    */
 	add	r0, r0, #4
 	cmp	r0, r1
-	ble	clbss_l
+	blo	clbss_l
 
 	ldr	pc, _start_armboot
 
diff --git a/arch/arm/cpu/arm926ejs/at91/cpu.c b/arch/arm/cpu/arm926ejs/at91/cpu.c
index 141a7d1..5e30f1d 100644
--- a/arch/arm/cpu/arm926ejs/at91/cpu.c
+++ b/arch/arm/cpu/arm926ejs/at91/cpu.c
@@ -1,4 +1,6 @@
 /*
+ * (C) Copyright 2010
+ * Reinhard Meyer, reinhard.meyer@emk-elektronik.de
  * (C) Copyright 2009
  * Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
  *
@@ -22,12 +24,11 @@
  */
 
 #include <common.h>
-#ifdef CONFIG_AT91_LEGACY
-#warning Your board is using legacy SoC access. Please update!
-#endif
 
 #include <asm/arch/hardware.h>
 #include <asm/arch/at91_pmc.h>
+#include <asm/arch/at91_pit.h>
+#include <asm/arch/at91_gpbr.h>
 #include <asm/arch/clk.h>
 #include <asm/arch/io.h>
 
@@ -35,18 +36,26 @@
 #define CONFIG_SYS_AT91_MAIN_CLOCK 0
 #endif
 
-/*
- * The at91sam9260 has 4 GPBR (0-3), we'll use the last one, nr 3,
- * to keep track of the bootcount.
- */
-#define AT91_GPBR_BOOTCOUNT_REGISTER 3
-#define AT91_BOOTCOUNT_ADDRESS (AT91_GPBR + 4*AT91_GPBR_BOOTCOUNT_REGISTER)
-
 int arch_cpu_init(void)
 {
 	return at91_clock_init(CONFIG_SYS_AT91_MAIN_CLOCK);
 }
 
+void arch_preboot_os(void)
+{
+	ulong cpiv;
+	at91_pit_t *pit = (at91_pit_t *) AT91_PIT_BASE;
+
+	cpiv = AT91_PIT_MR_PIV_MASK(readl(&pit->piir));
+
+	/*
+	 * Disable PITC
+	 * Add 0x1000 to current counter to stop it faster
+	 * without waiting for wrapping back to 0
+	 */
+	writel(cpiv + 0x1000, &pit->mr);
+}
+
 #if defined(CONFIG_DISPLAY_CPUINFO)
 int print_cpuinfo(void)
 {
@@ -66,27 +75,26 @@ int print_cpuinfo(void)
 
 #ifdef CONFIG_BOOTCOUNT_LIMIT
 /*
- * Just as the mpc5xxx, we combine the BOOTCOUNT_MAGIC and boocount
- * in one 32-bit register. This is done, as the AT91SAM9260 only has
- * 4 GPBR.
+ * We combine the BOOTCOUNT_MAGIC and bootcount in one 32-bit register.
+ * This is done so we need to use only one of the four GPBR registers.
  */
 void bootcount_store (ulong a)
 {
-	volatile ulong *save_addr =
-		(volatile ulong *)(AT91_BASE_SYS + AT91_BOOTCOUNT_ADDRESS);
+	at91_gpbr_t *gpbr = (at91_gpbr_t *) AT91_GPR_BASE;
 
-	*save_addr = (BOOTCOUNT_MAGIC & 0xffff0000) | (a & 0x0000ffff);
+	writel((BOOTCOUNT_MAGIC & 0xffff0000) | (a & 0x0000ffff),
+		&gpbr->reg[AT91_GPBR_INDEX_BOOTCOUNT]);
 }
 
 ulong bootcount_load (void)
 {
-	volatile ulong *save_addr =
-		(volatile ulong *)(AT91_BASE_SYS + AT91_BOOTCOUNT_ADDRESS);
+	at91_gpbr_t *gpbr = (at91_gpbr_t *) AT91_GPR_BASE;
 
-	if ((*save_addr & 0xffff0000) != (BOOTCOUNT_MAGIC & 0xffff0000))
+	ulong val = readl(&gpbr->reg[AT91_GPBR_INDEX_BOOTCOUNT]);
+	if ((val & 0xffff0000) != (BOOTCOUNT_MAGIC & 0xffff0000))
 		return 0;
 	else
-		return (*save_addr & 0x0000ffff);
+		return val & 0x0000ffff;
 }
 
 #endif /* CONFIG_BOOTCOUNT_LIMIT */
diff --git a/arch/arm/cpu/arm926ejs/kirkwood/cpu.c b/arch/arm/cpu/arm926ejs/kirkwood/cpu.c
index 82c978b..b4a4c04 100644
--- a/arch/arm/cpu/arm926ejs/kirkwood/cpu.c
+++ b/arch/arm/cpu/arm926ejs/kirkwood/cpu.c
@@ -54,10 +54,11 @@ unsigned char get_random_hex(void)
 	u8 outbuf[BUFLEN];
 
 	/*
-	 * in case of 88F6281/88F6192 A0,
+	 * in case of 88F6281/88F6282/88F6192 A0,
 	 * Bit7 need to reset to generate random values in KW_REG_UNDOC_0x1470
-	 * Soc reg offsets KW_REG_UNDOC_0x1470 and KW_REG_UNDOC_0x1478 are reserved regs and
-	 * Does not have names at this moment (no errata available)
+	 * Soc reg offsets KW_REG_UNDOC_0x1470 and KW_REG_UNDOC_0x1478 are
+	 * reserved regs and does not have names at this moment
+	 * (no errata available)
 	 */
 	writel(readl(KW_REG_UNDOC_0x1478) & ~(1 << 7), KW_REG_UNDOC_0x1478);
 	for (i = 0; i < BUFLEN; i++) {
@@ -271,20 +272,31 @@ static void kw_sysrst_check(void)
 #if defined(CONFIG_DISPLAY_CPUINFO)
 int print_cpuinfo(void)
 {
-	char *name = "Unknown";
+	char *rev;
+	u16 devid = (readl(KW_REG_PCIE_DEVID) >> 16) & 0xffff;
+	u8 revid = readl(KW_REG_PCIE_REVID) & 0xff;
 
-	switch (readl(KW_REG_DEVICE_ID) & 0x03) {
-	case 1:
-		name = "88F6192_A0";
+	if ((readl(KW_REG_DEVICE_ID) & 0x03) > 2) {
+		printf("Error.. %s:Unsupported Kirkwood SoC 88F%04x\n", __FUNCTION__, devid);
+		return -1;
+	}
+
+	switch (revid) {
+	case 0:
+		rev = "Z0";
 		break;
 	case 2:
-		name = "88F6281_A0";
+		rev = "A0";
+		break;
+	case 3:
+		rev = "A1";
 		break;
 	default:
-		printf("SoC:   Unsupported Kirkwood\n");
-		return -1;
+		rev = "??";
+		break;
 	}
-	printf("SoC:   Kirkwood %s\n", name);
+
+	printf("SoC:   Kirkwood 88F%04x_%s\n", devid, rev);
 	return 0;
 }
 #endif /* CONFIG_DISPLAY_CPUINFO */
diff --git a/arch/arm/cpu/arm926ejs/kirkwood/dram.c b/arch/arm/cpu/arm926ejs/kirkwood/dram.c
index 8f2a18a..7439c87 100644
--- a/arch/arm/cpu/arm926ejs/kirkwood/dram.c
+++ b/arch/arm/cpu/arm926ejs/kirkwood/dram.c
@@ -23,8 +23,11 @@
  */
 
 #include <config.h>
+#include <common.h>
 #include <asm/arch/kirkwood.h>
 
+DECLARE_GLOBAL_DATA_PTR;
+
 #define KW_REG_CPUCS_WIN_BAR(x)		(KW_REGISTER(0x1500) + (x * 0x08))
 #define KW_REG_CPUCS_WIN_SZ(x)		(KW_REGISTER(0x1504) + (x * 0x08))
 /*
@@ -56,3 +59,38 @@ u32 kw_sdram_bs(enum memory_bank bank)
 	result += 0x01000000;
 	return result;
 }
+
+#ifndef CONFIG_SYS_BOARD_DRAM_INIT
+int dram_init(void)
+{
+	int i;
+
+	gd->ram_size = 0;
+	for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) {
+		gd->bd->bi_dram[i].start = kw_sdram_bar(i);
+		gd->bd->bi_dram[i].size = kw_sdram_bs(i);
+		/*
+		 * It is assumed that all memory banks are consecutive
+		 * and without gaps.
+		 * If the gap is found, ram_size will be reported for
+		 * consecutive memory only
+		 */
+		if (gd->bd->bi_dram[i].start != gd->ram_size)
+			break;
+
+		gd->ram_size += gd->bd->bi_dram[i].size;
+
+	}
+	return 0;
+}
+
+/*
+ * If this function is not defined here,
+ * board.c alters dram bank zero configuration defined above.
+ */
+void dram_init_banksize(void)
+{
+	dram_init();
+}
+#endif /* CONFIG_SYS_BOARD_DRAM_INIT */
+
diff --git a/arch/arm/cpu/arm926ejs/orion5x/cpu.c b/arch/arm/cpu/arm926ejs/orion5x/cpu.c
index 260f88b..1894b52 100644
--- a/arch/arm/cpu/arm926ejs/orion5x/cpu.c
+++ b/arch/arm/cpu/arm926ejs/orion5x/cpu.c
@@ -48,24 +48,34 @@ void reset_cpu(unsigned long ignored)
 }
 
 /*
- * Window Size
+ * Compute Window Size field value from size expressed in bytes
  * Used with the Base register to set the address window size and location.
  * Must be programmed from LSB to MSB as sequence of ones followed by
  * sequence of zeros. The number of ones specifies the size of the window in
- * 64 KByte granularity (e.g., a value of 0x00FF specifies 256 = 16 MByte).
- * NOTE: A value of 0x0 specifies 64-KByte size.
+ * 64 KiB granularity (e.g., a value of 0x00FF specifies 256 = 16 MiB).
+ * NOTES:
+ * 1) A sizeval equal to 0x0 specifies 4 GiB.
+ * 2) A return value of 0x0 specifies 64 KiB.
  */
 unsigned int orion5x_winctrl_calcsize(unsigned int sizeval)
 {
-	int i;
-	unsigned int j = 0;
-	u32 val = sizeval >> 1;
-
-	for (i = 0; val >= 0x10000; i++) {
-		j |= (1 << i);
-		val = val >> 1;
-	}
-	return 0x0000ffff & j;
+	/*
+	 * Calculate the number of 64 KiB blocks needed minus one (rounding up).
+	 * For sizeval > 0 this is equivalent to:
+	 * sizeval = (u32) ceil((double) sizeval / 65536.0) - 1
+	 */
+	sizeval = (sizeval - 1) >> 16;
+
+	/*
+	 * Propagate 'one' bits to the right by 'oring' them.
+	 * We need only treat bits 15-0.
+	 */
+	sizeval |= sizeval >> 1;  /* 'Or' bit 15 onto bit 14 */
+	sizeval |= sizeval >> 2;  /* 'Or' bits 15-14 onto bits 13-12 */
+	sizeval |= sizeval >> 4;  /* 'Or' bits 15-12 onto bits 11-8 */
+	sizeval |= sizeval >> 8;  /* 'Or' bits 15-8 onto bits 7-0*/
+
+	return sizeval;
 }
 
 /*
@@ -77,6 +87,17 @@ unsigned int orion5x_winctrl_calcsize(unsigned int sizeval)
  *
  * If remap function not used, remap_lo must be set as base
  *
+ * NOTES:
+ *
+ * 1) in order to avoid windows with inconsistent control and base values
+ *    (which could prevent access to BOOTCS and hence execution from FLASH)
+ *    always disable window before writing the base value then reenable it
+ *    by writing the control value.
+ *
+ * 2) in order to avoid losing access to BOOTCS when disabling window 7,
+ *    first configure window 6 for BOOTCS, then configure window 7 for BOOTCS,
+ *    then configure windows 6 for its own target.
+ *
  * Reference Documentation:
  * Mbus-L to Mbus Bridge Registers Configuration.
  * (Sec 25.1 and 25.3 of Datasheet)
@@ -86,57 +107,64 @@ int orion5x_config_adr_windows(void)
 	struct orion5x_win_registers *winregs =
 		(struct orion5x_win_registers *)ORION5X_CPU_WIN_BASE;
 
-	/* Window 0: PCIE MEM address space */
-	writel(ORION5X_CPU_WIN_CTRL_DATA(ORION5X_SZ_PCIE_MEM,
-		ORION5X_TARGET_PCIE, ORION5X_ATTR_PCIE_MEM,
-		ORION5X_WIN_ENABLE), &winregs[0].ctrl);
+/* Disable window 0, configure it for its intended target, enable it. */
+	writel(0, &winregs[0].ctrl);
 	writel(ORION5X_ADR_PCIE_MEM, &winregs[0].base);
 	writel(ORION5X_ADR_PCIE_MEM_REMAP_LO, &winregs[0].remap_lo);
 	writel(ORION5X_ADR_PCIE_MEM_REMAP_HI, &winregs[0].remap_hi);
-
-	/* Window 1: PCIE IO address space */
-	writel(ORION5X_CPU_WIN_CTRL_DATA(ORION5X_SZ_PCIE_IO,
-		ORION5X_TARGET_PCIE, ORION5X_ATTR_PCIE_IO,
-		ORION5X_WIN_ENABLE), &winregs[1].ctrl);
+	writel(ORION5X_CPU_WIN_CTRL_DATA(ORION5X_SZ_PCIE_MEM,
+		ORION5X_TARGET_PCIE, ORION5X_ATTR_PCIE_MEM,
+		ORION5X_WIN_ENABLE), &winregs[0].ctrl);
+/* Disable window 1, configure it for its intended target, enable it. */
+	writel(0, &winregs[1].ctrl);
 	writel(ORION5X_ADR_PCIE_IO, &winregs[1].base);
 	writel(ORION5X_ADR_PCIE_IO_REMAP_LO, &winregs[1].remap_lo);
 	writel(ORION5X_ADR_PCIE_IO_REMAP_HI, &winregs[1].remap_hi);
-
-	/* Window 2: PCI MEM address space */
+	writel(ORION5X_CPU_WIN_CTRL_DATA(ORION5X_SZ_PCIE_IO,
+		ORION5X_TARGET_PCIE, ORION5X_ATTR_PCIE_IO,
+		ORION5X_WIN_ENABLE), &winregs[1].ctrl);
+/* Disable window 2, configure it for its intended target, enable it. */
+	writel(0, &winregs[2].ctrl);
+	writel(ORION5X_ADR_PCI_MEM, &winregs[2].base);
 	writel(ORION5X_CPU_WIN_CTRL_DATA(ORION5X_SZ_PCI_MEM,
 		ORION5X_TARGET_PCI, ORION5X_ATTR_PCI_MEM,
 		ORION5X_WIN_ENABLE), &winregs[2].ctrl);
-	writel(ORION5X_ADR_PCI_MEM, &winregs[2].base);
-
-	/* Window 3: PCI IO address space */
+/* Disable window 3, configure it for its intended target, enable it. */
+	writel(0, &winregs[3].ctrl);
+	writel(ORION5X_ADR_PCI_IO, &winregs[3].base);
 	writel(ORION5X_CPU_WIN_CTRL_DATA(ORION5X_SZ_PCI_IO,
 		ORION5X_TARGET_PCI, ORION5X_ATTR_PCI_IO,
 		ORION5X_WIN_ENABLE), &winregs[3].ctrl);
-	writel(ORION5X_ADR_PCI_IO, &winregs[3].base);
-
-	/* Window 4: DEV_CS0 address space */
+/* Disable window 4, configure it for its intended target, enable it. */
+	writel(0, &winregs[4].ctrl);
+	writel(ORION5X_ADR_DEV_CS0, &winregs[4].base);
 	writel(ORION5X_CPU_WIN_CTRL_DATA(ORION5X_SZ_DEV_CS0,
 		ORION5X_TARGET_DEVICE, ORION5X_ATTR_DEV_CS0,
 		ORION5X_WIN_ENABLE), &winregs[4].ctrl);
-	writel(ORION5X_ADR_DEV_CS0, &winregs[4].base);
-
-	/* Window 5: DEV_CS1 address space */
+/* Disable window 5, configure it for its intended target, enable it. */
+	writel(0, &winregs[5].ctrl);
+	writel(ORION5X_ADR_DEV_CS1, &winregs[5].base);
 	writel(ORION5X_CPU_WIN_CTRL_DATA(ORION5X_SZ_DEV_CS1,
 		ORION5X_TARGET_DEVICE, ORION5X_ATTR_DEV_CS1,
 		ORION5X_WIN_ENABLE), &winregs[5].ctrl);
-	writel(ORION5X_ADR_DEV_CS1, &winregs[5].base);
-
-	/* Window 6: DEV_CS2 address space */
-	writel(ORION5X_CPU_WIN_CTRL_DATA(ORION5X_SZ_DEV_CS2,
-		ORION5X_TARGET_DEVICE, ORION5X_ATTR_DEV_CS2,
+/* Disable window 6, configure it for FLASH, enable it. */
+	writel(0, &winregs[6].ctrl);
+	writel(ORION5X_ADR_BOOTROM, &winregs[6].base);
+	writel(ORION5X_CPU_WIN_CTRL_DATA(ORION5X_SZ_BOOTROM,
+		ORION5X_TARGET_DEVICE, ORION5X_ATTR_BOOTROM,
 		ORION5X_WIN_ENABLE), &winregs[6].ctrl);
-	writel(ORION5X_ADR_DEV_CS2, &winregs[6].base);
-
-	/* Window 7: BOOT Memory address space */
+/* Disable window 7, configure it for FLASH, enable it. */
+	writel(0, &winregs[7].ctrl);
+	writel(ORION5X_ADR_BOOTROM, &winregs[7].base);
 	writel(ORION5X_CPU_WIN_CTRL_DATA(ORION5X_SZ_BOOTROM,
 		ORION5X_TARGET_DEVICE, ORION5X_ATTR_BOOTROM,
 		ORION5X_WIN_ENABLE), &winregs[7].ctrl);
-	writel(ORION5X_ADR_BOOTROM, &winregs[7].base);
+/* Disable window 6, configure it for its intended target, enable it. */
+	writel(0, &winregs[6].ctrl);
+	writel(ORION5X_ADR_DEV_CS2, &winregs[6].base);
+	writel(ORION5X_CPU_WIN_CTRL_DATA(ORION5X_SZ_DEV_CS2,
+		ORION5X_TARGET_DEVICE, ORION5X_ATTR_DEV_CS2,
+		ORION5X_WIN_ENABLE), &winregs[6].ctrl);
 
 	return 0;
 }
@@ -265,6 +293,8 @@ int arch_misc_init(void)
 	writel(ORION5X_MPP16_23, ORION5X_MPP_BASE+0x50);
 	writel(ORION5X_GPIO_OUT_ENABLE, ORION5X_GPIO_BASE+0x04);
 
+	/* initialize timer */
+	timer_init_r();
 	return 0;
 }
 #endif /* CONFIG_ARCH_MISC_INIT */
diff --git a/arch/arm/cpu/arm926ejs/orion5x/timer.c b/arch/arm/cpu/arm926ejs/orion5x/timer.c
index 115448f..089ef47 100644
--- a/arch/arm/cpu/arm926ejs/orion5x/timer.c
+++ b/arch/arm/cpu/arm926ejs/orion5x/timer.c
@@ -173,9 +173,11 @@ int timer_init(void)
 	cntmrctrl |= CTCR_ARM_TIMER_EN(UBOOT_CNTR);
 	cntmrctrl |= CTCR_ARM_TIMER_AUTO_EN(UBOOT_CNTR);
 	writel(cntmrctrl, CNTMR_CTRL_REG);
+	return 0;
+}
 
+void timer_init_r(void)
+{
 	/* init the timestamp and lastdec value */
 	reset_timer_masked();
-
-	return 0;
 }
diff --git a/arch/arm/cpu/arm926ejs/start.S b/arch/arm/cpu/arm926ejs/start.S
index 16ee972..a960689 100644
--- a/arch/arm/cpu/arm926ejs/start.S
+++ b/arch/arm/cpu/arm926ejs/start.S
@@ -236,8 +236,8 @@ stack_setup:
 copy_loop:
 	ldmia	r0!, {r9-r10}		/* copy from source address [r0]    */
 	stmia	r6!, {r9-r10}		/* copy to   target address [r1]    */
-	cmp	r0, r2			/* until source end addreee [r2]    */
-	ble	copy_loop
+	cmp	r0, r2			/* until source end address [r2]    */
+	blo	copy_loop
 
 #ifndef CONFIG_PRELOADER
 	/* fix got entries */
@@ -341,8 +341,8 @@ relocate:				/* relocate U-Boot to RAM	    */
 copy_loop:
 	ldmia	r0!, {r3-r10}		/* copy from source address [r0]    */
 	stmia	r1!, {r3-r10}		/* copy to   target address [r1]    */
-	cmp	r0, r2			/* until source end addreee [r2]    */
-	ble	copy_loop
+	cmp	r0, r2			/* until source end address [r2]    */
+	blo	copy_loop
 #endif	/* CONFIG_SKIP_RELOCATE_UBOOT */
 
 	/* Set up the stack						    */
@@ -368,7 +368,7 @@ clear_bss:
 clbss_l:str	r2, [r0]		/* clear loop...                    */
 	add	r0, r0, #4
 	cmp	r0, r1
-	ble	clbss_l
+	blo	clbss_l
 
 	bl coloured_LED_init
 	bl red_LED_on
diff --git a/arch/arm/cpu/arm946es/start.S b/arch/arm/cpu/arm946es/start.S
index 18ed0b2..4f062e5 100644
--- a/arch/arm/cpu/arm946es/start.S
+++ b/arch/arm/cpu/arm946es/start.S
@@ -207,8 +207,8 @@ stack_setup:
 copy_loop:
 	ldmia	r0!, {r9-r10}		/* copy from source address [r0]    */
 	stmia	r6!, {r9-r10}		/* copy to   target address [r1]    */
-	cmp	r0, r2			/* until source end addreee [r2]    */
-	ble	copy_loop
+	cmp	r0, r2			/* until source end address [r2]    */
+	blo	copy_loop
 
 #ifndef CONFIG_PRELOADER
 	/* fix got entries */
@@ -309,8 +309,8 @@ relocate:				/* relocate U-Boot to RAM	    */
 copy_loop:
 	ldmia	r0!, {r3-r10}		/* copy from source address [r0]    */
 	stmia	r1!, {r3-r10}		/* copy to   target address [r1]    */
-	cmp	r0, r2			/* until source end addreee [r2]    */
-	ble	copy_loop
+	cmp	r0, r2			/* until source end address [r2]    */
+	blo	copy_loop
 
 	/* Set up the stack						    */
 stack_setup:
diff --git a/arch/arm/cpu/arm_intcm/start.S b/arch/arm/cpu/arm_intcm/start.S
index b39fdc6..79ef517 100644
--- a/arch/arm/cpu/arm_intcm/start.S
+++ b/arch/arm/cpu/arm_intcm/start.S
@@ -205,8 +205,8 @@ stack_setup:
 copy_loop:
 	ldmia	r0!, {r9-r10}		/* copy from source address [r0]    */
 	stmia	r6!, {r9-r10}		/* copy to   target address [r1]    */
-	cmp	r0, r2			/* until source end addreee [r2]    */
-	ble	copy_loop
+	cmp	r0, r2			/* until source end address [r2]    */
+	blo	copy_loop
 
 #ifndef CONFIG_PRELOADER
 	/* fix got entries */
@@ -305,8 +305,8 @@ relocate:				/* relocate U-Boot to RAM	    */
 copy_loop:
 	ldmia	r0!, {r3-r10}		/* copy from source address [r0]    */
 	stmia	r1!, {r3-r10}		/* copy to   target address [r1]    */
-	cmp	r0, r2			/* until source end addreee [r2]    */
-	ble	copy_loop
+	cmp	r0, r2			/* until source end address [r2]    */
+	blo	copy_loop
 
 	/* Set up the stack						    */
 stack_setup:
@@ -327,7 +327,7 @@ clear_bss:
 clbss_l:str	r2, [r0]		/* clear loop...                    */
 	add	r0, r0, #4
 	cmp	r0, r1
-	ble	clbss_l
+	blo	clbss_l
 
 	ldr	pc, _start_armboot
 
diff --git a/arch/arm/cpu/armv7/Makefile b/arch/arm/cpu/armv7/Makefile
index ae20299..7743fef 100644
--- a/arch/arm/cpu/armv7/Makefile
+++ b/arch/arm/cpu/armv7/Makefile
@@ -27,6 +27,7 @@ LIB	= $(obj)lib$(CPU).a
 
 START	:= start.o
 COBJS	:= cpu.o
+COBJS  += syslib.o
 
 SRCS	:= $(START:.o=.S) $(COBJS:.o=.c)
 OBJS	:= $(addprefix $(obj),$(COBJS))
@@ -44,4 +45,4 @@ include $(SRCTREE)/rules.mk
 
 sinclude $(obj).depend
 
-#########################################################################
\ No newline at end of file
+#########################################################################
diff --git a/arch/arm/cpu/armv7/omap-common/Makefile b/arch/arm/cpu/armv7/omap-common/Makefile
index caee726..aedea7b 100644
--- a/arch/arm/cpu/armv7/omap-common/Makefile
+++ b/arch/arm/cpu/armv7/omap-common/Makefile
@@ -28,7 +28,6 @@ LIB	= $(obj)libomap-common.a
 SOBJS	:= reset.o
 
 COBJS	:= timer.o
-COBJS	+= syslib.o
 
 SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
 OBJS	:= $(addprefix $(obj),$(SOBJS) $(COBJS))
diff --git a/arch/arm/cpu/armv7/start.S b/arch/arm/cpu/armv7/start.S
index f411c0f..c392c5d 100644
--- a/arch/arm/cpu/armv7/start.S
+++ b/arch/arm/cpu/armv7/start.S
@@ -209,8 +209,8 @@ stack_setup:
 copy_loop:
 	ldmia	r0!, {r9-r10}		/* copy from source address [r0]    */
 	stmia	r6!, {r9-r10}		/* copy to   target address [r1]    */
-	cmp	r0, r2			/* until source end addreee [r2]    */
-	ble	copy_loop
+	cmp	r0, r2			/* until source end address [r2]    */
+	blo	copy_loop
 
 #ifndef CONFIG_PRELOADER
 	/* fix got entries */
@@ -324,8 +324,8 @@ relocate:				@ relocate U-Boot to RAM
 copy_loop:				@ copy 32 bytes at a time
 	ldmia	r0!, {r3 - r10}		@ copy from source address [r0]
 	stmia	r1!, {r3 - r10}		@ copy to   target address [r1]
-	cmp	r0, r2			@ until source end addreee [r2]
-	ble	copy_loop
+	cmp	r0, r2			@ until source end address [r2]
+	blo	copy_loop
 #endif	/* CONFIG_SKIP_RELOCATE_UBOOT */
 
 	/* Set up the stack */
diff --git a/arch/arm/cpu/armv7/omap-common/syslib.c b/arch/arm/cpu/armv7/syslib.c
index f9ed9a3..f9ed9a3 100644
--- a/arch/arm/cpu/armv7/omap-common/syslib.c
+++ b/arch/arm/cpu/armv7/syslib.c
diff --git a/arch/arm/cpu/ixp/start.S b/arch/arm/cpu/ixp/start.S
index b2c8255..940d45d 100644
--- a/arch/arm/cpu/ixp/start.S
+++ b/arch/arm/cpu/ixp/start.S
@@ -330,8 +330,8 @@ stack_setup:
 copy_loop:
 	ldmia	r0!, {r9-r10}		/* copy from source address [r0]    */
 	stmia	r6!, {r9-r10}		/* copy to   target address [r1]    */
-	cmp	r0, r2			/* until source end addreee [r2]    */
-	ble	copy_loop
+	cmp	r0, r2			/* until source end address [r2]    */
+	blo	copy_loop
 
 #ifndef CONFIG_PRELOADER
 	/* fix got entries */
@@ -547,8 +547,8 @@ relocate:				/* relocate U-Boot to RAM	    */
 copy_loop:
 	ldmia	r0!, {r3-r10}		/* copy from source address [r0]    */
 	stmia	r1!, {r3-r10}		/* copy to   target address [r1]    */
-	cmp	r0, r2			/* until source end addreee [r2]    */
-	ble	copy_loop
+	cmp	r0, r2			/* until source end address [r2]    */
+	blo	copy_loop
 #endif	/* CONFIG_SKIP_RELOCATE_UBOOT */
 
 	/* Set up the stack						    */
@@ -570,7 +570,7 @@ clear_bss:
 clbss_l:str	r2, [r0]		/* clear loop...                    */
 	add	r0, r0, #4
 	cmp	r0, r1
-	ble	clbss_l
+	blo	clbss_l
 
 	ldr	pc, _start_armboot
 
diff --git a/arch/arm/cpu/lh7a40x/start.S b/arch/arm/cpu/lh7a40x/start.S
index 002116a..b8cf1b8 100644
--- a/arch/arm/cpu/lh7a40x/start.S
+++ b/arch/arm/cpu/lh7a40x/start.S
@@ -219,8 +219,8 @@ stack_setup:
 copy_loop:
 	ldmia	r0!, {r9-r10}		/* copy from source address [r0]    */
 	stmia	r6!, {r9-r10}		/* copy to   target address [r1]    */
-	cmp	r0, r2			/* until source end addreee [r2]    */
-	ble	copy_loop
+	cmp	r0, r2			/* until source end address [r2]    */
+	blo	copy_loop
 
 #ifndef CONFIG_PRELOADER
 	/* fix got entries */
@@ -341,9 +341,8 @@ relocate:				/* relocate U-Boot to RAM	    */
 copy_loop:
 	ldmia	r0!, {r3-r10}		/* copy from source address [r0]    */
 	stmia	r1!, {r3-r10}		/* copy to   target address [r1]    */
-	cmp	r0, r2			/* until source end addreee [r2]    */
-	blt	copy_loop		/* a 'ble' here actually copies     */
-					/*   four bytes of bss              */
+	cmp	r0, r2			/* until source end address [r2]    */
+	blo	copy_loop
 #endif	/* CONFIG_SKIP_RELOCATE_UBOOT */
 
 	/* Set up the stack						    */
@@ -367,7 +366,7 @@ clear_bss:
 clbss_l:str	r2, [r0]		/* clear loop...                    */
 	add	r0, r0, #4
 	cmp	r0, r1
-	ble	clbss_l
+	blo	clbss_l
 
 	ldr	pc, _start_armboot
 
diff --git a/arch/arm/cpu/pxa/start.S b/arch/arm/cpu/pxa/start.S
index 064ddbc..cfb9411 100644
--- a/arch/arm/cpu/pxa/start.S
+++ b/arch/arm/cpu/pxa/start.S
@@ -204,8 +204,8 @@ stack_setup:
 copy_loop:
 	ldmia	r0!, {r9-r10}		/* copy from source address [r0]    */
 	stmia	r6!, {r9-r10}		/* copy to   target address [r1]    */
-	cmp	r0, r2			/* until source end addreee [r2]    */
-	ble	copy_loop
+	cmp	r0, r2			/* until source end address [r2]    */
+	blo	copy_loop
 
 #ifndef CONFIG_PRELOADER
 	/* fix got entries */
@@ -310,7 +310,7 @@ copy_loop:
 	ldmia	r0!, {r3-r10}		/* copy from source address [r0]    */
 	stmia	r1!, {r3-r10}		/* copy to   target address [r1]    */
 	cmp	r0, r2			/* until source end address [r2]    */
-	ble	copy_loop
+	blo	copy_loop
 #endif /* !CONFIG_SKIP_RELOCATE_UBOOT */
 
 	/* Set up the stack						    */
@@ -337,7 +337,7 @@ clear_bss:
 clbss_l:str	r2, [r0]		/* clear loop...		    */
 	add	r0, r0, #4
 	cmp	r0, r1
-	ble	clbss_l
+	blo	clbss_l
 #endif
 
 	ldr	pc, _start_armboot
diff --git a/arch/arm/cpu/s3c44b0/start.S b/arch/arm/cpu/s3c44b0/start.S
index e1ab5cc..c5a67dc 100644
--- a/arch/arm/cpu/s3c44b0/start.S
+++ b/arch/arm/cpu/s3c44b0/start.S
@@ -191,8 +191,8 @@ stack_setup:
 copy_loop:
 	ldmia	r0!, {r9-r10}		/* copy from source address [r0]    */
 	stmia	r6!, {r9-r10}		/* copy to   target address [r1]    */
-	cmp	r0, r2			/* until source end addreee [r2]    */
-	ble	copy_loop
+	cmp	r0, r2			/* until source end address [r2]    */
+	blo	copy_loop
 
 #ifndef CONFIG_PRELOADER
 	/* fix got entries */
@@ -225,7 +225,7 @@ vector_copy_loop:
 	ldmia	r0!, {r3-r10}
 	stmia	r1!, {r3-r10}
 	cmp	r0, r2
-	ble	vector_copy_loop
+	blo	vector_copy_loop
 #endif	/* #ifndef CONFIG_SKIP_RELOCATE_UBOOT */
 
 clear_bss:
@@ -310,8 +310,8 @@ relocate:				/* relocate U-Boot to RAM	    */
 copy_loop:
 	ldmia	r0!, {r3-r10}		/* copy from source address [r0]    */
 	stmia	r1!, {r3-r10}		/* copy to   target address [r1]    */
-	cmp	r0, r2			/* until source end addreee [r2]    */
-	ble	copy_loop
+	cmp	r0, r2			/* until source end address [r2]    */
+	blo	copy_loop
 
 /*
 	now copy to sram the interrupt vector
@@ -324,7 +324,7 @@ vector_copy_loop:
 	ldmia	r0!, {r3-r10}
 	stmia	r1!, {r3-r10}
 	cmp	r0, r2
-	ble	vector_copy_loop
+	blo	vector_copy_loop
 #endif	/* CONFIG_SKIP_RELOCATE_UBOOT */
 
 	/* Set up the stack						    */
diff --git a/arch/arm/cpu/sa1100/start.S b/arch/arm/cpu/sa1100/start.S
index 4730e5a..d1262ad 100644
--- a/arch/arm/cpu/sa1100/start.S
+++ b/arch/arm/cpu/sa1100/start.S
@@ -195,8 +195,8 @@ stack_setup:
 copy_loop:
 	ldmia	r0!, {r9-r10}		/* copy from source address [r0]    */
 	stmia	r6!, {r9-r10}		/* copy to   target address [r1]    */
-	cmp	r0, r2			/* until source end addreee [r2]    */
-	ble	copy_loop
+	cmp	r0, r2			/* until source end address [r2]    */
+	blo	copy_loop
 
 #ifndef CONFIG_PRELOADER
 	/* fix got entries */
@@ -293,8 +293,8 @@ relocate:				/* relocate U-Boot to RAM	    */
 copy_loop:
 	ldmia	r0!, {r3-r10}		/* copy from source address [r0]    */
 	stmia	r1!, {r3-r10}		/* copy to   target address [r1]    */
-	cmp	r0, r2			/* until source end addreee [r2]    */
-	ble	copy_loop
+	cmp	r0, r2			/* until source end address [r2]    */
+	blo	copy_loop
 #endif	/* CONFIG_SKIP_RELOCATE_UBOOT */
 
 	/* Set up the stack						    */
@@ -316,7 +316,7 @@ clear_bss:
 clbss_l:str	r2, [r0]		/* clear loop...                    */
 	add	r0, r0, #4
 	cmp	r0, r1
-	ble	clbss_l
+	blo	clbss_l
 
 	ldr	pc, _start_armboot
 
diff --git a/arch/arm/include/asm/arch-arm925t/sizes.h b/arch/arm/include/asm/arch-arm925t/sizes.h
deleted file mode 100644
index 7319bd9..0000000
--- a/arch/arm/include/asm/arch-arm925t/sizes.h
+++ /dev/null
@@ -1,50 +0,0 @@
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307	 USA
- */
-/* DO NOT EDIT!! - this file automatically generated
- *		   from .s file by awk -f s2h.awk
- */
-/*  Size defintions
- *  Copyright (C) ARM Limited 1998. All rights reserved.
- */
-
-#ifndef __sizes_h
-#define __sizes_h			1
-
-/* handy sizes */
-#define SZ_1K				0x00000400
-#define SZ_4K				0x00001000
-#define SZ_8K				0x00002000
-#define SZ_16K				0x00004000
-#define SZ_64K				0x00010000
-#define SZ_128K				0x00020000
-#define SZ_256K				0x00040000
-#define SZ_512K				0x00080000
-
-#define SZ_1M				0x00100000
-#define SZ_2M				0x00200000
-#define SZ_4M				0x00400000
-#define SZ_8M				0x00800000
-#define SZ_16M				0x01000000
-#define SZ_32M				0x02000000
-#define SZ_64M				0x04000000
-#define SZ_128M				0x08000000
-#define SZ_256M				0x10000000
-#define SZ_512M				0x20000000
-
-#define SZ_1G				0x40000000
-#define SZ_2G				0x80000000
-
-#endif	/* __sizes_h */
diff --git a/arch/arm/include/asm/arch-arm926ejs/sizes.h b/arch/arm/include/asm/arch-arm926ejs/sizes.h
deleted file mode 100644
index ef0b99b..0000000
--- a/arch/arm/include/asm/arch-arm926ejs/sizes.h
+++ /dev/null
@@ -1,51 +0,0 @@
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA0 2111-1307
- * USA
- */
-/* DO NOT EDIT!! - this file automatically generated
- *		   from .s file by awk -f s2h.awk
- */
-/*  Size defintions
- *  Copyright (C) ARM Limited 1998. All rights reserved.
- */
-
-#ifndef __sizes_h
-#define __sizes_h			1
-
-/* handy sizes */
-#define SZ_1K		0x00000400
-#define SZ_4K		0x00001000
-#define SZ_8K		0x00002000
-#define SZ_16K		0x00004000
-#define SZ_64K		0x00010000
-#define SZ_128K	0x00020000
-#define SZ_256K	0x00040000
-#define SZ_512K	0x00080000
-
-#define SZ_1M		0x00100000
-#define SZ_2M		0x00200000
-#define SZ_4M		0x00400000
-#define SZ_8M		0x00800000
-#define SZ_16M		0x01000000
-#define SZ_32M		0x02000000
-#define SZ_64M		0x04000000
-#define SZ_128M	0x08000000
-#define SZ_256M	0x10000000
-#define SZ_512M	0x20000000
-
-#define SZ_1G		0x40000000
-#define SZ_2G		0x80000000
-
-#endif	/* __sizes_h */
diff --git a/arch/arm/include/asm/arch-armv7/sysctrl.h b/arch/arm/include/asm/arch-armv7/sysctrl.h
new file mode 100644
index 0000000..4e45167
--- /dev/null
+++ b/arch/arm/include/asm/arch-armv7/sysctrl.h
@@ -0,0 +1,70 @@
+/*
+ * (C) Copyright 2010 Linaro
+ * Matt Waddel, <matt.waddel@linaro.org>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#ifndef _SYSCTRL_H_
+#define _SYSCTRL_H_
+
+/* System controller (SP810) register definitions */
+#define SP810_TIMER0_ENSEL	(1 << 15)
+#define SP810_TIMER1_ENSEL	(1 << 17)
+#define SP810_TIMER2_ENSEL	(1 << 19)
+#define SP810_TIMER3_ENSEL	(1 << 21)
+
+struct sysctrl {
+	u32 scctrl;		/* 0x000 */
+	u32 scsysstat;
+	u32 scimctrl;
+	u32 scimstat;
+	u32 scxtalctrl;
+	u32 scpllctrl;
+	u32 scpllfctrl;
+	u32 scperctrl0;
+	u32 scperctrl1;
+	u32 scperen;
+	u32 scperdis;
+	u32 scperclken;
+	u32 scperstat;
+	u32 res1[0x006];
+	u32 scflashctrl;	/* 0x04c */
+	u32 res2[0x3a4];
+	u32 scsysid0;		/* 0xee0 */
+	u32 scsysid1;
+	u32 scsysid2;
+	u32 scsysid3;
+	u32 scitcr;
+	u32 scitir0;
+	u32 scitir1;
+	u32 scitor;
+	u32 sccntctrl;
+	u32 sccntdata;
+	u32 sccntstep;
+	u32 res3[0x32];
+	u32 scperiphid0;	/* 0xfe0 */
+	u32 scperiphid1;
+	u32 scperiphid2;
+	u32 scperiphid3;
+	u32 scpcellid0;
+	u32 scpcellid1;
+	u32 scpcellid2;
+	u32 scpcellid3;
+};
+#endif /* _SYSCTRL_H_ */
diff --git a/board/freescale/mx51evk/mx51evk.h b/arch/arm/include/asm/arch-armv7/systimer.h
index 2854e71..e745e37 100644
--- a/board/freescale/mx51evk/mx51evk.h
+++ b/arch/arm/include/asm/arch-armv7/systimer.h
@@ -1,5 +1,6 @@
 /*
- * (C) Copyright 2009 Freescale Semiconductor, Inc.
+ * (C) Copyright 2010 Linaro
+ * Matt Waddel, <matt.waddel@linaro.org>
  *
  * See file CREDITS for list of people who contributed to this
  * project.
@@ -19,32 +20,31 @@
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  * MA 02111-1307 USA
  */
+#ifndef _SYSTIMER_H_
+#define _SYSTIMER_H_
 
-#ifndef __BOARD_FREESCALE_MX51_EVK_H__
-#define __BOARD_FREESCALE_MX51_EVK_H__
+/* AMBA timer register base address */
+#define SYSTIMER_BASE		0x10011000
 
-#ifndef __ASSEMBLY__
-struct io_board_ctrl {
-	u16 led_ctrl;		/* 0x00 */
-	u16 resv1[0x03];
-	u16 sb_stat;		/* 0x08 */
-	u16 resv2[0x03];
-	u16 int_stat;		/* 0x10 */
-	u16 resv3[0x07];
-	u16 int_rest;		/* 0x20 */
-	u16 resv4[0x0B];
-	u16 int_mask;		/* 0x38 */
-	u16 resv5[0x03];
-	u16 id1;		/* 0x40 */
-	u16 resv6[0x03];
-	u16 id2;		/* 0x48 */
-	u16 resv7[0x03];
-	u16 version;		/* 0x50 */
-	u16 resv8[0x03];
-	u16 id3;		/* 0x58 */
-	u16 resv9[0x03];
-	u16 sw_reset;		/* 0x60 */
-};
-#endif
+#define SYSHZ_CLOCK		1000000		/* Timers -> 1Mhz */
+#define SYSTIMER_RELOAD		0xFFFFFFFF
+#define SYSTIMER_EN		(1 << 7)
+#define SYSTIMER_32BIT		(1 << 1)
 
-#endif
+struct systimer {
+	u32 timer0load;		/* 0x00 */
+	u32 timer0value;
+	u32 timer0control;
+	u32 timer0intclr;
+	u32 timer0ris;
+	u32 timer0mis;
+	u32 timer0bgload;
+	u32 timer1load;		/* 0x20 */
+	u32 timer1value;
+	u32 timer1control;
+	u32 timer1intclr;
+	u32 timer1ris;
+	u32 timer1mis;
+	u32 timer1bgload;
+};
+#endif /* _SYSTIMER_H_ */
diff --git a/arch/arm/include/asm/arch-armv7/wdt.h b/arch/arm/include/asm/arch-armv7/wdt.h
new file mode 100644
index 0000000..ee74c38
--- /dev/null
+++ b/arch/arm/include/asm/arch-armv7/wdt.h
@@ -0,0 +1,55 @@
+/*
+ * (C) Copyright 2010
+ * Matt Waddel, <matt.waddel@linaro.org>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#ifndef _WDT_H_
+#define _WDT_H_
+
+/* Watchdog timer (SP805) register base address */
+#define WDT_BASE	0x100E5000
+
+#define WDT_EN		0x2
+#define WDT_RESET_LOAD	0x0
+
+struct wdt {
+	u32 wdogload;		/* 0x000 */
+	u32 wdogvalue;
+	u32 wdogcontrol;
+	u32 wdogintclr;
+	u32 wdogris;
+	u32 wdogmis;
+	u32 res1[0x2F9];
+	u32 wdoglock;		/* 0xC00 */
+	u32 res2[0xBE];
+	u32 wdogitcr;		/* 0xF00 */
+	u32 wdogitop;
+	u32 res3[0x35];
+	u32 wdogperiphid0;	/* 0xFE0 */
+	u32 wdogperiphid1;
+	u32 wdogperiphid2;
+	u32 wdogperiphid3;
+	u32 wdogpcellid0;
+	u32 wdogpcellid1;
+	u32 wdogpcellid2;
+	u32 wdogpcellid3;
+};
+
+#endif /* _WDT_H_ */
diff --git a/arch/arm/include/asm/arch-at91/at91_emac.h b/arch/arm/include/asm/arch-at91/at91_emac.h
index 45ae333..0e2ff78 100644
--- a/arch/arm/include/asm/arch-at91/at91_emac.h
+++ b/arch/arm/include/asm/arch-at91/at91_emac.h
@@ -61,7 +61,7 @@ typedef struct at91_emac {
 	u32	 reserved2[3];
 	u32	 hsh;
 	u32	 hsl;
-	u32	 sh1l;
+	u32	 sa1l;
 	u32	 sa1h;
 	u32	 sa2l;
 	u32	 sa2h;
diff --git a/arch/arm/include/asm/arch-kirkwood/cpu.h b/arch/arm/include/asm/arch-kirkwood/cpu.h
index b3022a3..d28c51a 100644
--- a/arch/arm/include/asm/arch-kirkwood/cpu.h
+++ b/arch/arm/include/asm/arch-kirkwood/cpu.h
@@ -35,6 +35,8 @@
 #define KWGBE_PORT_SERIAL_CONTROL1_REG(_x)	\
 		((_x ? KW_EGIGA0_BASE : KW_EGIGA1_BASE) + 0x44c)
 
+#define KW_REG_PCIE_DEVID		(KW_REG_PCIE_BASE + 0x00)
+#define KW_REG_PCIE_REVID		(KW_REG_PCIE_BASE + 0x08)
 #define KW_REG_DEVICE_ID		(KW_MPP_BASE + 0x34)
 #define KW_REG_SYSRST_CNT		(KW_MPP_BASE + 0x50)
 #define SYSRST_CNT_1SEC_VAL		(25*1000000)
diff --git a/arch/arm/include/asm/arch-mx31/mx31-regs.h b/arch/arm/include/asm/arch-mx31/mx31-regs.h
index d72585c..f05e743 100644
--- a/arch/arm/include/asm/arch-mx31/mx31-regs.h
+++ b/arch/arm/include/asm/arch-mx31/mx31-regs.h
@@ -57,6 +57,14 @@ struct clock_control_regs {
 	u32 pdr2;
 };
 
+/* GPIO Registers */
+struct gpio_regs {
+	u32	gpio_dr;
+	u32	gpio_dir;
+	u32	gpio_psr;
+};
+
+
 /* Bit definitions for RCSR register in CCM */
 #define CCM_RCSR_NF16B	(1 << 31)
 #define CCM_RCSR_NFMS	(1 << 30)
@@ -153,9 +161,9 @@ struct clock_control_regs {
 /*
  * GPIO
  */
-#define GPIO1_BASE	0x53FCC000
-#define GPIO2_BASE	0x53FD0000
-#define GPIO3_BASE	0x53FA4000
+#define GPIO1_BASE_ADDR	0x53FCC000
+#define GPIO2_BASE_ADDR	0x53FD0000
+#define GPIO3_BASE_ADDR	0x53FA4000
 #define GPIO_DR		0x00000000	/* data register */
 #define GPIO_GDIR	0x00000004	/* direction register */
 #define GPIO_PSR	0x00000008	/* pad status register */
diff --git a/arch/arm/include/asm/arch-mx31/mx31.h b/arch/arm/include/asm/arch-mx31/mx31.h
index f702d26..5a5aa11 100644
--- a/arch/arm/include/asm/arch-mx31/mx31.h
+++ b/arch/arm/include/asm/arch-mx31/mx31.h
@@ -28,31 +28,6 @@ extern u32 mx31_get_ipg_clk(void);
 #define imx_get_uartclk mx31_get_ipg_clk
 extern void mx31_gpio_mux(unsigned long mode);
 
-enum mx31_gpio_direction {
-	MX31_GPIO_DIRECTION_IN,
-	MX31_GPIO_DIRECTION_OUT,
-};
-
-#ifdef CONFIG_MX31_GPIO
-extern int mx31_gpio_direction(unsigned int gpio,
-			       enum mx31_gpio_direction direction);
-extern void mx31_gpio_set(unsigned int gpio, unsigned int value);
-extern int mx31_gpio_get(unsigned int gpio);
-#else
-static inline int mx31_gpio_direction(unsigned int gpio,
-				      enum mx31_gpio_direction direction)
-{
-	return 1;
-}
-static inline int mx31_gpio_get(unsigned int gpio)
-{
-	return 1;
-}
-static inline void mx31_gpio_set(unsigned int gpio, unsigned int value)
-{
-}
-#endif
-
 void mx31_uart1_hw_init(void);
 void mx31_spi2_hw_init(void);
 
diff --git a/arch/arm/include/asm/arch-mx51/imx-regs.h b/arch/arm/include/asm/arch-mx51/imx-regs.h
index 3887d3c..3ddda40 100644
--- a/arch/arm/include/asm/arch-mx51/imx-regs.h
+++ b/arch/arm/include/asm/arch-mx51/imx-regs.h
@@ -23,9 +23,6 @@
 #ifndef __ASM_ARCH_MXC_MX51_H__
 #define __ASM_ARCH_MXC_MX51_H__
 
-#define __REG(x)	(*((volatile u32 *)(x)))
-#define __REG16(x)	(*((volatile u16 *)(x)))
-#define __REG8(x)	(*((volatile u8 *)(x)))
 /*
  * IRAM
  */
@@ -207,7 +204,12 @@
 #define BOARD_REV_1_0           0x0
 #define BOARD_REV_2_0           0x1
 
-#ifndef __ASSEMBLY__
+#if !(defined(__KERNEL_STRICT_NAMES) || defined(__ASSEMBLY__))
+#include <asm/types.h>
+
+#define __REG(x)	(*((volatile u32 *)(x)))
+#define __REG16(x)	(*((volatile u16 *)(x)))
+#define __REG8(x)	(*((volatile u8 *)(x)))
 
 struct clkctl {
 	u32	ccr;
@@ -256,6 +258,22 @@ struct weim {
 	u32	cswcr2;
 };
 
+/* GPIO Registers */
+struct gpio_regs {
+	u32	gpio_dr;
+	u32	gpio_dir;
+	u32	gpio_psr;
+};
+
+/* System Reset Controller (SRC) */
+struct src {
+	u32	scr;
+	u32	sbmr;
+	u32	srsr;
+	u32	reserved1[2];
+	u32	sisr;
+	u32	simr;
+};
 #endif /* __ASSEMBLER__*/
 
 #endif				/*  __ASM_ARCH_MXC_MX51_H__ */
diff --git a/arch/arm/include/asm/arch-mx51/mx51_pins.h b/arch/arm/include/asm/arch-mx51/mx51_pins.h
index ca26f41..b44ff25 100644
--- a/arch/arm/include/asm/arch-mx51/mx51_pins.h
+++ b/arch/arm/include/asm/arch-mx51/mx51_pins.h
@@ -368,6 +368,50 @@ enum iomux_pins {
 	MX51_PIN_GPIO1_7 = _MXC_BUILD_GPIO_PIN(0, 7, 0, 0x3E4, 0x810),
 	MX51_PIN_GPIO1_8 = _MXC_BUILD_GPIO_PIN(0, 8, 0, 0x3E8, 0x814),
 	MX51_PIN_GPIO1_9 = _MXC_BUILD_GPIO_PIN(0, 9, 0, 0x3EC, 0x818),
+
+	/* The following are PADS used for drive strength */
+
+	MX51_PIN_CTL_GRP_DDRPKS = _MXC_BUILD_NON_GPIO_PIN(0, 0x820),
+	MX51_PIN_CTL_GRP_PKEDDR = _MXC_BUILD_NON_GPIO_PIN(0, 0x838),
+	MX51_PIN_CTL_GRP_PKEADDR = _MXC_BUILD_NON_GPIO_PIN(0, 0x890),
+	MX51_PIN_CTL_GRP_DDRAPKS = _MXC_BUILD_NON_GPIO_PIN(0, 0x87C),
+	MX51_PIN_CTL_GRP_DDRAPUS = _MXC_BUILD_NON_GPIO_PIN(0, 0x84C),
+	MX51_PIN_CTL_GRP_DDRPUS = _MXC_BUILD_NON_GPIO_PIN(0, 0x884),
+	MX51_PIN_CTL_GRP_HYSDDR0 = _MXC_BUILD_NON_GPIO_PIN(0, 0x85C),
+	MX51_PIN_CTL_GRP_HYSDDR1 = _MXC_BUILD_NON_GPIO_PIN(0, 0x864),
+	MX51_PIN_CTL_GRP_HYSDDR2 = _MXC_BUILD_NON_GPIO_PIN(0, 0x86C),
+	MX51_PIN_CTL_GRP_HYSDDR3 = _MXC_BUILD_NON_GPIO_PIN(0, 0x874),
+	MX51_PIN_CTL_GRP_DDR_SR_B0 = _MXC_BUILD_NON_GPIO_PIN(0, 0x878),
+	MX51_PIN_CTL_GRP_DDR_SR_B1 = _MXC_BUILD_NON_GPIO_PIN(0, 0x880),
+	MX51_PIN_CTL_GRP_DDR_SR_B2 = _MXC_BUILD_NON_GPIO_PIN(0, 0x88C),
+	MX51_PIN_CTL_GRP_DDR_SR_B4 = _MXC_BUILD_NON_GPIO_PIN(0, 0x89C),
+	MX51_PIN_CTL_GRP_DRAM_B0 = _MXC_BUILD_NON_GPIO_PIN(0, 0x8A4),
+	MX51_PIN_CTL_GRP_DRAM_B1 = _MXC_BUILD_NON_GPIO_PIN(0, 0x8AC),
+	MX51_PIN_CTL_GRP_DRAM_B2 = _MXC_BUILD_NON_GPIO_PIN(0, 0x8B8),
+	MX51_PIN_CTL_GRP_DRAM_B4 = _MXC_BUILD_NON_GPIO_PIN(0, 0x82C),
+	MX51_PIN_CTL_GRP_INMODE1 = _MXC_BUILD_NON_GPIO_PIN(0, 0x8A0),
+	MX51_PIN_CTL_GRP_DDR_SR_A0 = _MXC_BUILD_NON_GPIO_PIN(0, 0x8B0),
+	MX51_PIN_CTL_GRP_EMI_DS5 = _MXC_BUILD_NON_GPIO_PIN(0, 0x8B4),
+	MX51_PIN_CTL_GRP_DDR_SR_A1 = _MXC_BUILD_NON_GPIO_PIN(0, 0x8BC),
+	MX51_PIN_CTL_GRP_DDR_A0 = _MXC_BUILD_NON_GPIO_PIN(0, 0x83C),
+	MX51_PIN_CTL_GRP_DDR_A1 = _MXC_BUILD_NON_GPIO_PIN(0, 0x848),
+	MX51_PIN_CTL_GRP_DISP_PKE0 = _MXC_BUILD_NON_GPIO_PIN(0, 0x868),
+	MX51_PIN_CTL_DRAM_RAS = _MXC_BUILD_NON_GPIO_PIN(0, 0x4A4),
+	MX51_PIN_CTL_DRAM_CAS = _MXC_BUILD_NON_GPIO_PIN(0, 0x4A8),
+	MX51_PIN_CTL_DRAM_SDWE = _MXC_BUILD_NON_GPIO_PIN(0, 0x4Ac),
+	MX51_PIN_CTL_DRAM_SDCKE0 = _MXC_BUILD_NON_GPIO_PIN(0, 0x4B0),
+	MX51_PIN_CTL_DRAM_SDCKE1 = _MXC_BUILD_NON_GPIO_PIN(0, 0x4B4),
+	MX51_PIN_CTL_DRAM_SDCLK = _MXC_BUILD_NON_GPIO_PIN(0, 0x4B8),
+	MX51_PIN_CTL_DRAM_SDQS0 = _MXC_BUILD_NON_GPIO_PIN(0, 0x4BC),
+	MX51_PIN_CTL_DRAM_SDQS1 = _MXC_BUILD_NON_GPIO_PIN(0, 0x4C0),
+	MX51_PIN_CTL_DRAM_SDQS2 = _MXC_BUILD_NON_GPIO_PIN(0, 0x4C4),
+	MX51_PIN_CTL_DRAM_SDQS3 = _MXC_BUILD_NON_GPIO_PIN(0, 0x4C8),
+	MX51_PIN_CTL_DRAM_CS0 = _MXC_BUILD_NON_GPIO_PIN(0, 0x4CC),
+	MX51_PIN_CTL_DRAM_CS1 = _MXC_BUILD_NON_GPIO_PIN(0, 0x4D0),
+	MX51_PIN_CTL_DRAM_DQM0 = _MXC_BUILD_NON_GPIO_PIN(0, 0x4D4),
+	MX51_PIN_CTL_DRAM_DQM1 = _MXC_BUILD_NON_GPIO_PIN(0, 0x4D8),
+	MX51_PIN_CTL_DRAM_DQM2 = _MXC_BUILD_NON_GPIO_PIN(0, 0x4DC),
+	MX51_PIN_CTL_DRAM_DQM3 = _MXC_BUILD_NON_GPIO_PIN(0, 0x4E0),
 };
 
 #endif				/* __ASSEMBLY__ */
diff --git a/arch/arm/include/asm/arch-mx51/sys_proto.h b/arch/arm/include/asm/arch-mx51/sys_proto.h
index bf500a8..f687503 100644
--- a/arch/arm/include/asm/arch-mx51/sys_proto.h
+++ b/arch/arm/include/asm/arch-mx51/sys_proto.h
@@ -26,5 +26,6 @@
 
 u32 get_cpu_rev(void);
 #define is_soc_rev(rev)	((get_cpu_rev() & 0xFF) - rev)
+void sdelay(unsigned long);
 
 #endif
diff --git a/arch/arm/include/asm/arch-omap/sizes.h b/arch/arm/include/asm/arch-omap/sizes.h
deleted file mode 100644
index f8d92ca..0000000
--- a/arch/arm/include/asm/arch-omap/sizes.h
+++ /dev/null
@@ -1,52 +0,0 @@
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-/* DO NOT EDIT!! - this file automatically generated
- *                 from .s file by awk -f s2h.awk
- */
-/*  Size defintions
- *  Copyright (C) ARM Limited 1998. All rights reserved.
- */
-
-#ifndef __sizes_h
-#define __sizes_h                       1
-
-/* handy sizes */
-#define SZ_1K                           0x00000400
-#define SZ_4K                           0x00001000
-#define SZ_8K                           0x00002000
-#define SZ_16K                          0x00004000
-#define SZ_64K                          0x00010000
-#define SZ_128K                         0x00020000
-#define SZ_256K                         0x00040000
-#define SZ_512K                         0x00080000
-
-#define SZ_1M                           0x00100000
-#define SZ_2M                           0x00200000
-#define SZ_4M                           0x00400000
-#define SZ_8M                           0x00800000
-#define SZ_16M                          0x01000000
-#define SZ_32M                          0x02000000
-#define SZ_64M                          0x04000000
-#define SZ_128M                         0x08000000
-#define SZ_256M                         0x10000000
-#define SZ_512M                         0x20000000
-
-#define SZ_1G                           0x40000000
-#define SZ_2G                           0x80000000
-
-#endif
-
-/*         END */
diff --git a/arch/arm/include/asm/arch-omap24xx/omap2420.h b/arch/arm/include/asm/arch-omap24xx/omap2420.h
index 0c11bec..6032419 100644
--- a/arch/arm/include/asm/arch-omap24xx/omap2420.h
+++ b/arch/arm/include/asm/arch-omap24xx/omap2420.h
@@ -25,7 +25,7 @@
 #ifndef _OMAP2420_SYS_H_
 #define _OMAP2420_SYS_H_
 
-#include <asm/arch/sizes.h>
+#include <asm/sizes.h>
 
 /*
  * 2420 specific Section
diff --git a/arch/arm/include/asm/arch-omap24xx/sizes.h b/arch/arm/include/asm/arch-omap24xx/sizes.h
deleted file mode 100644
index aaba18f..0000000
--- a/arch/arm/include/asm/arch-omap24xx/sizes.h
+++ /dev/null
@@ -1,49 +0,0 @@
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307	 USA
- */
-/*  Size defintions
- *  Copyright (C) ARM Limited 1998. All rights reserved.
- */
-
-#ifndef __sizes_h
-#define __sizes_h			1
-
-/* handy sizes */
-#define SZ_1K				0x00000400
-#define SZ_4K				0x00001000
-#define SZ_8K				0x00002000
-#define SZ_16K				0x00004000
-#define SZ_32K				0x00008000
-#define SZ_64K				0x00010000
-#define SZ_128K				0x00020000
-#define SZ_256K				0x00040000
-#define SZ_512K				0x00080000
-
-#define SZ_1M				0x00100000
-#define SZ_2M				0x00200000
-#define SZ_4M				0x00400000
-#define SZ_8M				0x00800000
-#define SZ_16M				0x01000000
-#define SZ_31M				0x01F00000
-#define SZ_32M				0x02000000
-#define SZ_64M				0x04000000
-#define SZ_128M				0x08000000
-#define SZ_256M				0x10000000
-#define SZ_512M				0x20000000
-
-#define SZ_1G				0x40000000
-#define SZ_2G				0x80000000
-
-#endif	/* __sizes_h */
diff --git a/arch/arm/include/asm/arch-orion5x/cpu.h b/arch/arm/include/asm/arch-orion5x/cpu.h
index 6ce02a9..c84efaf 100644
--- a/arch/arm/include/asm/arch-orion5x/cpu.h
+++ b/arch/arm/include/asm/arch-orion5x/cpu.h
@@ -255,5 +255,6 @@ void reset_cpu(unsigned long ignored);
 u32 orion5x_device_id(void);
 u32 orion5x_device_rev(void);
 unsigned int orion5x_winctrl_calcsize(unsigned int sizeval);
+void timer_init_r(void);
 #endif /* __ASSEMBLY__ */
 #endif /* _ORION5X_CPU_H */
diff --git a/arch/arm/include/asm/sizes.h b/arch/arm/include/asm/sizes.h
index f8d92ca..b0b4f6a 100644
--- a/arch/arm/include/asm/sizes.h
+++ b/arch/arm/include/asm/sizes.h
@@ -13,9 +13,6 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
-/* DO NOT EDIT!! - this file automatically generated
- *                 from .s file by awk -f s2h.awk
- */
 /*  Size defintions
  *  Copyright (C) ARM Limited 1998. All rights reserved.
  */
@@ -28,6 +25,7 @@
 #define SZ_4K                           0x00001000
 #define SZ_8K                           0x00002000
 #define SZ_16K                          0x00004000
+#define SZ_32K                          0x00008000
 #define SZ_64K                          0x00010000
 #define SZ_128K                         0x00020000
 #define SZ_256K                         0x00040000
@@ -38,6 +36,7 @@
 #define SZ_4M                           0x00400000
 #define SZ_8M                           0x00800000
 #define SZ_16M                          0x01000000
+#define SZ_31M                          0x01F00000
 #define SZ_32M                          0x02000000
 #define SZ_64M                          0x04000000
 #define SZ_128M                         0x08000000
diff --git a/board/Marvell/guruplug/guruplug.c b/board/Marvell/guruplug/guruplug.c
index c028a53..4df4e9b 100644
--- a/board/Marvell/guruplug/guruplug.c
+++ b/board/Marvell/guruplug/guruplug.c
@@ -108,17 +108,6 @@ int board_init(void)
 	return 0;
 }
 
-int dram_init(void)
-{
-	int i;
-
-	for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) {
-		gd->bd->bi_dram[i].start = kw_sdram_bar(i);
-		gd->bd->bi_dram[i].size = kw_sdram_bs(i);
-	}
-	return 0;
-}
-
 #ifdef CONFIG_RESET_PHY_R
 void mv_phy_88e1121_init(char *name)
 {
diff --git a/board/Marvell/mv88f6281gtw_ge/mv88f6281gtw_ge.c b/board/Marvell/mv88f6281gtw_ge/mv88f6281gtw_ge.c
index c959bf8..93d1400 100644
--- a/board/Marvell/mv88f6281gtw_ge/mv88f6281gtw_ge.c
+++ b/board/Marvell/mv88f6281gtw_ge/mv88f6281gtw_ge.c
@@ -110,17 +110,6 @@ int board_init(void)
 	return 0;
 }
 
-int dram_init(void)
-{
-	int i;
-
-	for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) {
-		gd->bd->bi_dram[i].start = kw_sdram_bar(i);
-		gd->bd->bi_dram[i].size = kw_sdram_bs(i);
-	}
-	return 0;
-}
-
 #ifdef CONFIG_MV88E61XX_SWITCH
 void reset_phy(void)
 {
diff --git a/board/Marvell/openrd_base/openrd_base.c b/board/Marvell/openrd_base/openrd_base.c
index c00a08a..d006b2d 100644
--- a/board/Marvell/openrd_base/openrd_base.c
+++ b/board/Marvell/openrd_base/openrd_base.c
@@ -113,17 +113,6 @@ int board_init(void)
 	return 0;
 }
 
-int dram_init(void)
-{
-	int i;
-
-	for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) {
-		gd->bd->bi_dram[i].start = kw_sdram_bar(i);
-		gd->bd->bi_dram[i].size = kw_sdram_bs(i);
-	}
-	return 0;
-}
-
 #ifdef CONFIG_RESET_PHY_R
 /* Configure and enable MV88E1116 PHY */
 void reset_phy(void)
diff --git a/board/Marvell/rd6281a/rd6281a.c b/board/Marvell/rd6281a/rd6281a.c
index 8713a3c..0d76146 100644
--- a/board/Marvell/rd6281a/rd6281a.c
+++ b/board/Marvell/rd6281a/rd6281a.c
@@ -109,17 +109,6 @@ int board_init(void)
 	return 0;
 }
 
-int dram_init(void)
-{
-	int i;
-
-	for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) {
-		gd->bd->bi_dram[i].start = kw_sdram_bar(i);
-		gd->bd->bi_dram[i].size = kw_sdram_bs(i);
-	}
-	return 0;
-}
-
 void mv_phy_88e1116_init(char *name)
 {
 	u16 reg;
diff --git a/board/Marvell/sheevaplug/sheevaplug.c b/board/Marvell/sheevaplug/sheevaplug.c
index 547126a..173a7b8 100644
--- a/board/Marvell/sheevaplug/sheevaplug.c
+++ b/board/Marvell/sheevaplug/sheevaplug.c
@@ -108,17 +108,6 @@ int board_init(void)
 	return 0;
 }
 
-int dram_init(void)
-{
-	int i;
-
-	for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) {
-		gd->bd->bi_dram[i].start = kw_sdram_bar(i);
-		gd->bd->bi_dram[i].size = kw_sdram_bs(i);
-	}
-	return 0;
-}
-
 #ifdef CONFIG_RESET_PHY_R
 /* Configure and enable MV88E1116 PHY */
 void reset_phy(void)
diff --git a/board/armltd/integrator/split_by_variant.sh b/board/armltd/integrator/split_by_variant.sh
index 702b436..d869dd2 100755
--- a/board/armltd/integrator/split_by_variant.sh
+++ b/board/armltd/integrator/split_by_variant.sh
@@ -10,12 +10,12 @@ then
 # ---------------------------------------------------------
 # Set the platform defines
 # ---------------------------------------------------------
-echo -n	"/* Integrator configuration implied "	 > ${config_file}
-echo	" by Makefile target */"		>> ${config_file}
-echo -n	"#define CONFIG_INTEGRATOR"		>> ${config_file}
-echo	" /* Integrator board */"		>> ${config_file}
-echo -n	"#define CONFIG_ARCH_INTEGRATOR"	>> ${config_file}
-echo	" 1 /* Integrator/AP	 */"		>> ${config_file}
+cat > ${config_file} << _EOF
+/* Integrator configuration implied by Makefile target */
+#define CONFIG_INTEGRATOR /* Integrator board */
+#define CONFIG_ARCH_INTEGRATOR 1 /* Integrator/AP */
+_EOF
+
 # ---------------------------------------------------------
 #	Set the core module defines according to Core Module
 # ---------------------------------------------------------
@@ -50,37 +50,37 @@ else
 
 	ap720t_config)
 	cpu="arm720t"
-	echo -n	"#define CONFIG_CM720T"			>> ${config_file}
-	echo	" 1 /* CPU core is ARM720T */ "		>> ${config_file}
+	echo "#define CONFIG_CM720T 1 /* CPU core is ARM720T */" \
+		>> ${config_file}
 	variant="Core module CM720T"
 	;;
 
 	ap922_XA10_config)
 	cpu="arm_intcm"
 	variant="unported core module CM922T_XA10"
-	echo -n	"#define CONFIG_CM922T_XA10"		>> ${config_file}
-	echo	" 1 /* CPU core is ARM922T_XA10 */"	>> ${config_file}
+	echo "#define CONFIG_CM922T_XA10 1 /* CPU core is ARM922T_XA10 */" \
+		>> ${config_file}
 	;;
 
 	ap920t_config)
 	cpu="arm920t"
 	variant="Core module CM920T"
-	echo -n	"#define CONFIG_CM920T"			>> ${config_file}
-	echo	" 1 /* CPU core is ARM920T */"		>> ${config_file}
+	echo "#define CONFIG_CM920T 1 /* CPU core is ARM920T */" \
+		>> ${config_file}
 	;;
 
 	ap926ejs_config)
 	cpu="arm926ejs"
 	variant="Core module CM926EJ-S"
-	echo -n	"#define CONFIG_CM926EJ_S"		>> ${config_file}
-	echo	" 1 /* CPU core is ARM926EJ-S */ "	>> ${config_file}
+	echo "#define CONFIG_CM926EJ_S 1 /* CPU core is ARM926EJ-S */" \
+		>> ${config_file}
 	;;
 
 	ap946es_config)
 	cpu="arm946es"
 	variant="Core module CM946E-S"
-	echo -n	"#define CONFIG_CM946E_S"		>> ${config_file}
-	echo	" 1 /* CPU core is ARM946E-S */ "	>> ${config_file}
+	echo "#define CONFIG_CM946E_S 1 /* CPU core is ARM946E-S */" \
+		>> ${config_file}
 	;;
 
 	*)
@@ -94,33 +94,26 @@ fi
 
 case "$cpu" in
 	arm_intcm)
-	echo "/* Core module undefined/not ported */"	>> ${config_file}
-	echo "#define CONFIG_ARM_INTCM 1"		>> ${config_file}
-	echo -n	"#undef CONFIG_CM_MULTIPLE_SSRAM"	>> ${config_file}
-	echo -n	"	/* CM may not have "		>> ${config_file}
-	echo	"multiple SSRAM mapping */"		>> ${config_file}
-	echo -n	"#undef CONFIG_CM_SPD_DETECT "		>> ${config_file}
-	echo -n	" /* CM may not support SPD "		>> ${config_file}
-	echo	"query */"				>> ${config_file}
-	echo -n	"#undef CONFIG_CM_REMAP	"		>> ${config_file}
-	echo -n	" /* CM may not support "		>> ${config_file}
-	echo	"remapping */"				>> ${config_file}
-	echo -n	"#undef CONFIG_CM_INIT	"		>> ${config_file}
-	echo -n	" /* CM may not have	"		>> ${config_file}
-	echo	"initialization reg */"			>> ${config_file}
-	echo -n	"#undef CONFIG_CM_TCRAM	"		>> ${config_file}
-	echo	" /* CM may not have TCRAM */"		>> ${config_file}
-	echo -n	" /* May not be processor "		>> ${config_file}
-	echo	"without cache support */"		>> ${config_file}
-	echo	"#define CONFIG_SYS_NO_ICACHE 1"	>> ${config_file}
-	echo	"#define CONFIG_SYS_NO_DCACHE 1"	>> ${config_file}
+	cat >> ${config_file} << _EOF
+/* Core module undefined/not ported */
+#define CONFIG_ARM_INTCM 1
+#undef CONFIG_CM_MULTIPLE_SSRAM /* CM may not have multiple SSRAM mapping */
+#undef CONFIG_CM_SPD_DETECT /* CM may not support SPD query */
+#undef CONFIG_CM_REMAP /* CM may not support remapping */
+#undef CONFIG_CM_INIT  /* CM may not have initialization reg */
+#undef CONFIG_CM_TCRAM /* CM may not have TCRAM */
+/* May not be processor without cache support */
+#define CONFIG_SYS_NO_ICACHE 1
+#define CONFIG_SYS_NO_DCACHE 1
+_EOF
 	;;
 
 	arm720t)
-	echo -n	" /* May not be processor "		>> ${config_file}
-	echo	"without cache support */"		>> ${config_file}
-	echo	"#define CONFIG_SYS_NO_ICACHE 1"	>> ${config_file}
-	echo	"#define CONFIG_SYS_NO_DCACHE 1"	>> ${config_file}
+	cat >> ${config_file} << _EOF
+/* May not be processor without cache support */
+#define CONFIG_SYS_NO_ICACHE 1
+#define CONFIG_SYS_NO_DCACHE 1
+_EOF
 	;;
 esac
 
@@ -129,12 +122,11 @@ else
 # ---------------------------------------------------------
 # Set the platform defines
 # ---------------------------------------------------------
-echo -n "/* Integrator configuration implied "   > ${config_file}
-echo    " by Makefile target */"		>> ${config_file}
-echo -n "#define CONFIG_INTEGRATOR"		>> ${config_file}
-echo	 " /* Integrator board */"		>> ${config_file}
-echo -n "#define CONFIG_ARCH_CINTEGRATOR"	>> ${config_file}
-echo     " 1 /* Integrator/CP   */"		>> ${config_file}
+cat >> ${config_file} << _EOF
+/* Integrator configuration implied by Makefile target */
+#define CONFIG_INTEGRATOR /* Integrator board */
+#define CONFIG_ARCH_CINTEGRATOR 1 /* Integrator/CP   */
+_EOF
 
 cpu="arm_intcm"
 variant="unknown core module"
@@ -163,37 +155,37 @@ else
 	cp922_XA10_config)
 	cpu="arm_intcm"
 	variant="unported core module CM922T_XA10"
-	echo -n "#define CONFIG_CM922T_XA10"		>> ${config_file}
-	echo    " 1 /* CPU core is ARM922T_XA10 */"	>> ${config_file}
+	echo "#define CONFIG_CM922T_XA10 1 /* CPU core is ARM922T_XA10 */" \
+		>> ${config_file}
 	;;
 
 	cp920t_config)
 	cpu="arm920t"
 	variant="Core module CM920T"
-	echo -n "#define CONFIG_CM920T"			>> ${config_file}
-	echo    " 1 /* CPU core is ARM920T */"		>> ${config_file}
+	echo "#define CONFIG_CM920T 1 /* CPU core is ARM920T */" \
+		>> ${config_file}
 	;;
 
 	cp926ejs_config)
 	cpu="arm926ejs"
 	variant="Core module CM926EJ-S"
-	echo -n "#define CONFIG_CM926EJ_S"		>> ${config_file}
-	echo    " 1 /* CPU core is ARM926EJ-S */ "	>> ${config_file}
+	echo "#define CONFIG_CM926EJ_S 1 /* CPU core is ARM926EJ-S */" \
+		>> ${config_file}
 	;;
 
 
 	cp946es_config)
 	cpu="arm946es"
 	variant="Core module CM946E-S"
-	echo -n "#define CONFIG_CM946E_S"		>> ${config_file}
-	echo    " 1 /* CPU core is ARM946E-S */ "	>> ${config_file}
+	echo "#define CONFIG_CM946E_S 1 /* CPU core is ARM946E-S */" \
+		>> ${config_file}
 	;;
 
 	cp1136_config)
 	cpu="arm1136"
 	variant="Core module CM1136EJF-S"
-	echo -n "#define CONFIG_CM1136EJF_S"		>> ${config_file}
-	echo    " 1 /* CPU core is ARM1136JF-S */ "	>> ${config_file}
+	echo "#define CONFIG_CM1136EJF_S 1 /* CPU core is ARM1136JF-S */" \
+		>> ${config_file}
 	;;
 
 	*)
@@ -208,22 +200,15 @@ fi
 
 if [ "$cpu" = "arm_intcm" ]
 then
-	echo "/* Core module undefined/not ported */"	>> ${config_file}
-	echo "#define CONFIG_ARM_INTCM 1"		>> ${config_file}
-	echo -n "#undef CONFIG_CM_MULTIPLE_SSRAM"	>> ${config_file}
-	echo -n "  /* CM may not have "			>> ${config_file}
-	echo    "multiple SSRAM mapping */"		>> ${config_file}
-	echo -n "#undef CONFIG_CM_SPD_DETECT "		>> ${config_file}
-	echo -n " /* CM may not support SPD "		>> ${config_file}
-	echo    "query */"				>> ${config_file}
-	echo -n "#undef CONFIG_CM_REMAP  "		>> ${config_file}
-	echo -n " /* CM may not support "		>> ${config_file}
-	echo    "remapping */"				>> ${config_file}
-	echo -n "#undef CONFIG_CM_INIT  "		>> ${config_file}
-	echo -n " /* CM may not have  "			>> ${config_file}
-	echo    "initialization reg */"			>> ${config_file}
-	echo -n "#undef CONFIG_CM_TCRAM  "		>> ${config_file}
-	echo    " /* CM may not have TCRAM */"		>> ${config_file}
+	cat >> ${config_file} << _EOF
+/* Core module undefined/not ported */
+#define CONFIG_ARM_INTCM 1
+#undef CONFIG_CM_MULTIPLE_SSRAM /* CM may not have multiple SSRAM mapping */
+#undef CONFIG_CM_SPD_DETECT /* CM may not support SPD query */
+#undef CONFIG_CM_REMAP /* CM may not support remapping */
+#undef CONFIG_CM_INIT /* CM may not have initialization reg */
+#undef CONFIG_CM_TCRAM /* CM may not have TCRAM */
+_EOF
 fi
 
 fi # ap
diff --git a/board/armltd/vexpress/Makefile b/board/armltd/vexpress/Makefile
new file mode 100644
index 0000000..ee5c0d8
--- /dev/null
+++ b/board/armltd/vexpress/Makefile
@@ -0,0 +1,49 @@
+#
+# (C) Copyright 2000-2004
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= $(obj)lib$(BOARD).a
+
+COBJS	:= ca9x4_ct_vxp.o
+
+SRCS	:= $(COBJS:.o=.c)
+OBJS	:= $(addprefix $(obj),$(COBJS))
+
+$(LIB):	$(obj).depend $(OBJS)
+	$(AR) $(ARFLAGS) $@ $(OBJS)
+
+clean:
+	rm -f $(SOBJS) $(OBJS)
+
+distclean:	clean
+	rm -f $(LIB) core *.bak $(obj).depend
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/armltd/vexpress/ca9x4_ct_vxp.c b/board/armltd/vexpress/ca9x4_ct_vxp.c
new file mode 100644
index 0000000..48dfc8c
--- /dev/null
+++ b/board/armltd/vexpress/ca9x4_ct_vxp.c
@@ -0,0 +1,220 @@
+/*
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Marius Groeger <mgroeger@sysgo.de>
+ *
+ * (C) Copyright 2002
+ * David Mueller, ELSOFT AG, <d.mueller@elsoft.ch>
+ *
+ * (C) Copyright 2003
+ * Texas Instruments, <www.ti.com>
+ * Kshitij Gupta <Kshitij@ti.com>
+ *
+ * (C) Copyright 2004
+ * ARM Ltd.
+ * Philippe Robin, <philippe.robin@arm.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#include <common.h>
+#include <netdev.h>
+#include <asm/io.h>
+#include <asm/arch/systimer.h>
+#include <asm/arch/sysctrl.h>
+#include <asm/arch/wdt.h>
+
+static ulong timestamp;
+static ulong lastdec;
+
+static struct wdt *wdt_base = (struct wdt *)WDT_BASE;
+static struct systimer *systimer_base = (struct systimer *)SYSTIMER_BASE;
+static struct sysctrl *sysctrl_base = (struct sysctrl *)SCTL_BASE;
+
+static void flash__init(void);
+static void vexpress_timer_init(void);
+DECLARE_GLOBAL_DATA_PTR;
+
+#if defined(CONFIG_SHOW_BOOT_PROGRESS)
+void show_boot_progress(int progress)
+{
+	printf("Boot reached stage %d\n", progress);
+}
+#endif
+
+static inline void delay(ulong loops)
+{
+	__asm__ volatile ("1:\n"
+		"subs %0, %1, #1\n"
+		"bne 1b" : "=r" (loops) : "0" (loops));
+}
+
+int board_init(void)
+{
+	gd->bd->bi_boot_params = LINUX_BOOT_PARAM_ADDR;
+	gd->bd->bi_arch_number = MACH_TYPE_VEXPRESS;
+	gd->flags = 0;
+
+	icache_enable();
+	flash__init();
+	vexpress_timer_init();
+
+	return 0;
+}
+
+int board_eth_init(bd_t *bis)
+{
+	int rc = 0;
+#ifdef CONFIG_SMC911X
+	rc = smc911x_initialize(0, CONFIG_SMC911X_BASE);
+#endif
+	return rc;
+}
+
+static void flash__init(void)
+{
+	/* Setup the sytem control register to allow writing to flash */
+	writel(readl(&sysctrl_base->scflashctrl) | VEXPRESS_FLASHPROG_FLVPPEN,
+	       &sysctrl_base->scflashctrl);
+}
+
+int dram_init(void)
+{
+	gd->ram_size = get_ram_size(CONFIG_SYS_SDRAM_BASE, PHYS_SDRAM_1_SIZE);
+	return 0;
+}
+
+void dram_init_banksize(void)
+{
+	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
+	gd->bd->bi_dram[0].size = get_ram_size(PHYS_SDRAM_1, PHYS_SDRAM_1_SIZE);
+	gd->bd->bi_dram[1].start = PHYS_SDRAM_2;
+	gd->bd->bi_dram[1].size = get_ram_size(PHYS_SDRAM_2, PHYS_SDRAM_2_SIZE);
+}
+
+int timer_init(void)
+{
+	return 0;
+}
+
+/*
+ * Start timer:
+ *    Setup a 32 bit timer, running at 1KHz
+ *    Versatile Express Motherboard provides 1 MHz timer
+ */
+static void vexpress_timer_init(void)
+{
+	/*
+	 * Set clock frequency in system controller:
+	 *   VEXPRESS_REFCLK is 32KHz
+	 *   VEXPRESS_TIMCLK is 1MHz
+	 */
+	writel(SP810_TIMER0_ENSEL | SP810_TIMER1_ENSEL |
+	       SP810_TIMER2_ENSEL | SP810_TIMER3_ENSEL |
+	       readl(&sysctrl_base->scctrl), &sysctrl_base->scctrl);
+
+	/*
+	 * Set Timer0 to be:
+	 *   Enabled, free running, no interrupt, 32-bit, wrapping
+	 */
+	writel(SYSTIMER_RELOAD, &systimer_base->timer0load);
+	writel(SYSTIMER_RELOAD, &systimer_base->timer0value);
+	writel(SYSTIMER_EN | SYSTIMER_32BIT | \
+	       readl(&systimer_base->timer0control), \
+	       &systimer_base->timer0control);
+
+	reset_timer_masked();
+}
+
+/* Use the ARM Watchdog System to cause reset */
+void reset_cpu(ulong addr)
+{
+	writeb(WDT_EN, &wdt_base->wdogcontrol);
+	writel(WDT_RESET_LOAD, &wdt_base->wdogload);
+	while (1)
+		;
+}
+
+/*
+ * Delay x useconds AND perserve advance timstamp value
+ *     assumes timer is ticking at 1 msec
+ */
+void udelay(ulong usec)
+{
+	ulong tmo, tmp;
+
+	tmo = usec / 1000;
+	tmp = get_timer(0);	/* get current timestamp */
+
+	/*
+	 * If setting this forward will roll time stamp	then
+	 * reset "advancing" timestamp to 0 and set lastdec value
+	 * otherwise set the advancing stamp to the wake up time
+	 */
+	if ((tmo + tmp + 1) < tmp)
+		reset_timer_masked();
+	else
+		tmo += tmp;
+
+	while (get_timer_masked() < tmo)
+		; /* loop till wakeup event */
+}
+
+ulong get_timer(ulong base)
+{
+	return get_timer_masked() - base;
+}
+
+void reset_timer_masked(void)
+{
+	lastdec = readl(&systimer_base->timer0value) / 1000;
+	timestamp = 0;
+}
+
+void reset_timer(void)
+{
+	reset_timer_masked();
+}
+
+ulong get_timer_masked(void)
+{
+	ulong now = readl(&systimer_base->timer0value) / 1000;
+
+	if (lastdec >= now) {	/* normal mode (non roll) */
+		timestamp += lastdec - now;
+	} else {		/* count down timer overflowed */
+		/*
+		 * nts = ts + ld - now
+		 * ts = old stamp, ld = time before passing through - 1
+		 * now = amount of time after passing though - 1
+		 * nts = new "advancing time stamp"
+		 */
+		timestamp += lastdec + SYSTIMER_RELOAD - now;
+	}
+	lastdec = now;
+
+	return timestamp;
+}
+
+void lowlevel_init(void)
+{
+}
+
+ulong get_board_rev(void){
+	return readl((u32 *)SYS_ID);
+}
diff --git a/board/armltd/vexpress/config.mk b/board/armltd/vexpress/config.mk
new file mode 100644
index 0000000..2d797d7
--- /dev/null
+++ b/board/armltd/vexpress/config.mk
@@ -0,0 +1,23 @@
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+# Linux-Kernel is expected to be at 0x60008000
+#
+TEXT_BASE = 0x60800000
+LDSCRIPT := $(SRCTREE)/board/armltd/vexpress/u-boot.lds
diff --git a/board/armltd/vexpress/u-boot.lds b/board/armltd/vexpress/u-boot.lds
new file mode 100644
index 0000000..5ac62f2
--- /dev/null
+++ b/board/armltd/vexpress/u-boot.lds
@@ -0,0 +1,65 @@
+/*
+ * (C) Copyright 2002
+ * Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
+OUTPUT_ARCH(arm)
+ENTRY(_start)
+SECTIONS
+{
+	. = 0x00000000;
+	. = ALIGN(4);
+	.text	:
+	{
+		arch/arm/cpu/armv7/start.o	(.text)
+		*(.text)
+	}
+
+	. = ALIGN(4);
+	.rodata : { *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata))) }
+
+	. = ALIGN(4);
+	.data : { *(.data)
+	__datarel_start = .;
+		*(.data.rel)
+	__datarelrolocal_start = .;
+		*(.data.rel.ro.local)
+	__datarellocal_start = .;
+		*(.data.rel.local)
+	__datarelro_start = .;
+		*(.data.rel.ro)
+	}
+
+	__got_start = .;
+	. = ALIGN(4);
+	.got : { *(.got) }
+	__got_end = .;
+
+	. = .;
+	__u_boot_cmd_start = .;
+	.u_boot_cmd : { *(.u_boot_cmd) }
+	__u_boot_cmd_end = .;
+
+	. = ALIGN(4);
+	__bss_start = .;
+	.bss : { *(.bss) }
+	_end = .;
+}
diff --git a/board/davedenx/qong/qong.c b/board/davedenx/qong/qong.c
index e509383..9abc29c 100644
--- a/board/davedenx/qong/qong.c
+++ b/board/davedenx/qong/qong.c
@@ -27,6 +27,7 @@
 #include <asm/arch/mx31-regs.h>
 #include <nand.h>
 #include <fsl_pmic.h>
+#include <mxc_gpio.h>
 #include "qong_fpga.h"
 
 DECLARE_GLOBAL_DATA_PTR;
@@ -41,9 +42,9 @@ int dram_init (void)
 
 static void qong_fpga_reset(void)
 {
-	mx31_gpio_set(QONG_FPGA_RST_PIN, 0);
+	mxc_gpio_set(QONG_FPGA_RST_PIN, 0);
 	udelay(30);
-	mx31_gpio_set(QONG_FPGA_RST_PIN, 1);
+	mxc_gpio_set(QONG_FPGA_RST_PIN, 1);
 
 	udelay(300);
 }
@@ -66,11 +67,11 @@ int board_early_init_f (void)
 
 	/* FPGA reset  Pin */
 	/* rstn = 0 */
-	mx31_gpio_set(QONG_FPGA_RST_PIN, 0);
-	mx31_gpio_direction(QONG_FPGA_RST_PIN, MX31_GPIO_DIRECTION_OUT);
+	mxc_gpio_set(QONG_FPGA_RST_PIN, 0);
+	mxc_gpio_direction(QONG_FPGA_RST_PIN, MXC_GPIO_DIRECTION_OUT);
 
 	/* set interrupt pin as input */
-	mx31_gpio_direction(QONG_FPGA_IRQ_PIN, MX31_GPIO_DIRECTION_IN);
+	mxc_gpio_direction(QONG_FPGA_IRQ_PIN, MXC_GPIO_DIRECTION_IN);
 
 #endif
 
@@ -206,27 +207,27 @@ static void board_nand_setup(void)
 	qong_fpga_reset();
 
 	/* Enable NAND flash */
-	mx31_gpio_set(15, 1);
-	mx31_gpio_set(14, 1);
-	mx31_gpio_direction(15, MX31_GPIO_DIRECTION_OUT);
-	mx31_gpio_direction(16, MX31_GPIO_DIRECTION_IN);
-	mx31_gpio_direction(14, MX31_GPIO_DIRECTION_IN);
-	mx31_gpio_set(15, 0);
+	mxc_gpio_set(15, 1);
+	mxc_gpio_set(14, 1);
+	mxc_gpio_direction(15, MXC_GPIO_DIRECTION_OUT);
+	mxc_gpio_direction(16, MXC_GPIO_DIRECTION_IN);
+	mxc_gpio_direction(14, MXC_GPIO_DIRECTION_IN);
+	mxc_gpio_set(15, 0);
 
 }
 
 int qong_nand_rdy(void *chip)
 {
 	udelay(1);
-	return mx31_gpio_get(16);
+	return mxc_gpio_get(16);
 }
 
 void qong_nand_select_chip(struct mtd_info *mtd, int chip)
 {
 	if (chip >= 0)
-		mx31_gpio_set(15, 0);
+		mxc_gpio_set(15, 0);
 	else
-		mx31_gpio_set(15, 1);
+		mxc_gpio_set(15, 1);
 
 }
 
diff --git a/board/freescale/mx51evk/mx51evk.c b/board/freescale/mx51evk/mx51evk.c
index 75d642b..84386e6 100644
--- a/board/freescale/mx51evk/mx51evk.c
+++ b/board/freescale/mx51evk/mx51evk.c
@@ -33,12 +33,10 @@
 #include <fsl_esdhc.h>
 #include <fsl_pmic.h>
 #include <mc13892.h>
-#include "mx51evk.h"
 
 DECLARE_GLOBAL_DATA_PTR;
 
 static u32 system_rev;
-struct io_board_ctrl *mx51_io_board;
 
 #ifdef CONFIG_FSL_ESDHC
 struct fsl_esdhc_cfg esdhc_cfg[2] = {
diff --git a/board/ttcontrol/vision2/Makefile b/board/ttcontrol/vision2/Makefile
new file mode 100644
index 0000000..309e3a3
--- /dev/null
+++ b/board/ttcontrol/vision2/Makefile
@@ -0,0 +1,48 @@
+#
+# Copyright (C) 2007, Guennadi Liakhovetski <lg@denx.de>
+#
+# (C) Copyright 2009 Freescale Semiconductor, Inc.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= $(obj)lib$(BOARD).a
+
+COBJS	:= vision2.o
+
+SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS	:= $(addprefix $(obj),$(COBJS))
+SOBJS	:= $(addprefix $(obj),$(SOBJS))
+
+$(LIB):	$(obj).depend $(OBJS) $(SOBJS)
+	$(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+
+clean:
+	rm -f $(SOBJS) $(OBJS)
+
+distclean:	clean
+	rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/ttcontrol/vision2/config.mk b/board/ttcontrol/vision2/config.mk
new file mode 100644
index 0000000..59f3367
--- /dev/null
+++ b/board/ttcontrol/vision2/config.mk
@@ -0,0 +1,25 @@
+#
+# Copyright 2009 Freescale Semiconductor, Inc. All Rights Reserved.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+LDSCRIPT = $(CPUDIR)/$(SOC)/u-boot.lds
+TEXT_BASE = 0x97800000
+IMX_CONFIG = $(SRCTREE)/board/$(BOARDDIR)/imximage_hynix.cfg
diff --git a/board/ttcontrol/vision2/imximage_hynix.cfg b/board/ttcontrol/vision2/imximage_hynix.cfg
new file mode 100644
index 0000000..ed531db
--- /dev/null
+++ b/board/ttcontrol/vision2/imximage_hynix.cfg
@@ -0,0 +1,209 @@
+#
+# (C) Copyright 2009
+# Stefano Babic DENX Software Engineering sbabic@denx.de.
+#
+# (C) Copyright 2010
+# Klaus Steinhammer TTECH Control Gmbh kst@tttech.com
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not write to the Free Software
+# Foundation Inc. 51 Franklin Street Fifth Floor Boston,
+# MA 02110-1301 USA
+#
+# Refer docs/README.imxmage for more details about how-to configure
+# and create imximage boot image
+#
+# The syntax is taken as close as possible with the kwbimage
+
+# Boot Device : one of
+# spi, nand, onenand, sd
+
+BOOT_FROM	spi
+
+# Device Configuration Data (DCD)
+#
+# Each entry must have the format:
+# Addr-type           Address        Value
+#
+# where:
+#	Addr-type register length (1,2 or 4 bytes)
+#	Address	  absolute address of the register
+#	value	  value to be stored in the register
+
+#######################
+### Disable WDOG ###
+#######################
+DATA 2 0x73f98000 0x30
+
+#######################
+### SET DDR Clk     ###
+#######################
+
+# CCM: CBMCR - ddr_clk_sel: axi_b (133MHz)
+DATA 4 0x73FD4018 0x000024C0
+
+# DOUBLE SPI CLK (13MHz->26 MHz Clock)
+DATA 4 0x73FD4038 0x2010241
+
+#IOMUXC_SW_PAD_CTL_PAD_CSPI1_MOSI HYS_ENABLE | DRV_MAX | SRE_FAST
+DATA 4 0x73fa8600 0x00000107
+#IOMUXC_SW_PAD_CTL_PAD_CSPI1_MISO HYS_ENABLE | DRV_MAX | SRE_FAST
+DATA 4 0x73fa8604 0x00000107
+#IOMUXC_SW_PAD_CTL_PAD_CSPI1_SS0 HYS_ENABLE | PKE_ENABLE | DRV_MAX | SRE_FAST
+DATA 4 0x73fa8608 0x00000187
+#IOMUXC_SW_PAD_CTL_PAD_CSPI1_SS1 HYS_ENABLE | PKE_ENABLE | DRV_MAX | SRE_FAST
+DATA 4 0x73fa860c 0x00000187
+#IOMUXC_SW_PAD_CTL_PAD_CSPI1_SCLK HYS_ENABLE | DRV_MAX | SRE_FAST
+DATA 4 0x73fa8614 0x00000107
+#IOMUXC_SW_PAD_CTL_PAD_DI1_PIN11 HYS_ENABLE | DRV_MAX | SRE_FAST (CSPI1_SS2)
+DATA 4 0x73fa86a8 0x00000187
+
+#######################
+### Settings IOMUXC ###
+#######################
+
+# DDR IOMUX configuration
+# Control, Data, Address pads are in their default state: HIGH DS, FAST SR.
+# IOMUXC_SW_PAD_CTL_PAD_DRAM_SDCLK MAX DS
+DATA 4 0x73fa84b8 0x000000e7
+# PVTC MAX (at GPC, PGR reg)
+#DATA 4 0x73FD8004 0x1fc00000
+
+#DQM0 DS high slew rate slow
+DATA 4 0x73fa84d4 0x000000e4
+#DQM1 DS high slew rate slow
+DATA 4 0x73fa84d8 0x000000e4
+#DQM2 DS high slew rate slow
+DATA 4 0x73fa84dc 0x000000e4
+#DQM3 DS high slew rate slow
+DATA 4 0x73fa84e0 0x000000e4
+
+#IOMUXC_SW_PAD_CTL_PAD_DRAM_SDQS0 DS high & SLEW slow
+DATA 4 0x73fa84bc 0x000000c4
+#IOMUXC_SW_PAD_CTL_PAD_DRAM_SDQS1 DS high & SLEW slow
+DATA 4 0x73fa84c0 0x000000c4
+#IOMUXC_SW_PAD_CTL_PAD_DRAM_SDQS2 DS high & SLEW slow
+DATA 4 0x73fa84c4 0x000000c4
+#IOMUXC_SW_PAD_CTL_PAD_DRAM_SDQS3 DS high & SLEW slow
+DATA 4 0x73fa84c8 0x000000c4
+
+#DRAM_DATA B0
+DATA 4 0x73fa88a4 0x00000004
+#DRAM_DATA B1
+DATA 4 0x73fa88ac 0x00000004
+#DRAM_DATA B2
+DATA 4 0x73fa88b8 0x00000004
+#DRAM_DATA B3
+DATA 4 0x73fa882c 0x00000004
+
+#DRAM_DATA B0 slew rate
+DATA 4 0x73fa8878 0x00000000
+#DRAM_DATA B1 slew rate
+DATA 4 0x73fa8880 0x00000000
+#DRAM_DATA B2 slew rate
+DATA 4 0x73fa888c 0x00000000
+#DRAM_DATA B3 slew rate
+DATA 4 0x73fa889c 0x00000000
+
+#######################
+### Configure SDRAM ###
+#######################
+
+# Configure CS0
+#######################
+
+# ESDCTL0: Enable controller
+DATA 4 0x83fd9000 0x83220000
+
+# Init DRAM on CS0
+# ESDSCR: Precharge command
+DATA 4 0x83fd9014 0x04008008
+# ESDSCR: Refresh command
+DATA 4 0x83fd9014 0x00008010
+# ESDSCR: Refresh command
+DATA 4 0x83fd9014 0x00008010
+# ESDSCR: LMR with CAS=3 and BL=3 (Burst Length = 8)
+DATA 4 0x83fd9014 0x00338018
+# ESDSCR: EMR with half Drive strength (= medium strength @ i.MX51)
+DATA 4 0x83fd9014 0x0020801a
+# ESDSCR
+DATA 4 0x83fd9014 0x00008000
+
+# ESDSCR: EMR with full Drive strength
+#DATA 4 0x83fd9014 0x0000801a
+
+# ESDCTL0: 14 ROW, 10 COL, 32Bit, SREF=8
+DATA 4 0x83fd9000 0xC3220000
+
+# ESDCFG0: tRFC:22clks, tXSR:28clks, tXP:2clks, tWTR:2clk, tRP:3clks, tMRD:2clks
+#          tRAS:8clks, tRRD:2clks, tWR:3clks, tRCD:3clks, tRC:11clks
+#DATA 4 0x83fd9004 0xC33574AA
+
+#micron mDDR
+# ESDCFG0: tRFC:11clks, tXSR:19clks, tXP:1clks, tWTR:2clk, tRP:3clks, tMRD:2clks
+# tRAS:7clks, tRRD:2clks, tWR:3clks, tRCD:3clks, tRC:9clks
+#DATA 4 0x83FD9004 0x101564a8
+
+#hynix mDDR
+# ESDCFG0: tRFC:17clks, tXSR:21clks, tXP:3clks, tWTR:1clk, tRP:3clks, tMRD:2clks
+# tRAS:7clks, tRRD:2clks, tWR:3clks, tRCD:3clks, tRC:9clks
+DATA 4 0x83FD9004 0x704564a8
+
+# ESDMISC: AP=10, Bank interleaving on, MIF3 en, RALAT=2
+DATA 4 0x83fd9010 0x000a1700
+
+# Configure CS1
+#######################
+
+# ESDCTL1: Enable controller
+DATA 4 0x83fd9008 0x83220000
+
+# Init DRAM on CS1
+# ESDSCR: Precharge command
+DATA 4 0x83fd9014 0x0400800c
+# ESDSCR: Refresh command
+DATA 4 0x83fd9014 0x00008014
+# ESDSCR: Refresh command
+DATA 4 0x83fd9014 0x00008014
+# ESDSCR: LMR with CAS=3 and BL=3 (Burst Length = 8)
+DATA 4 0x83fd9014 0x0033801c
+# ESDSCR: EMR with half Drive strength (= medium strength @ i.MX51)
+DATA 4 0x83fd9014 0x0020801e
+# ESDSCR
+DATA 4 0x83fd9014 0x00008004
+
+# ESDCTL1: 14 ROW, 10 COL, 32Bit, SREF=8
+DATA 4 0x83fd9008 0xC3220000
+
+# ESDCFG1: tRFC:22clks, tXSR:28clks, tXP:2clks, tWTR:2clk, tRP:3clks, tMRD:2clks
+#          tRAS:8clks, tRRD:2clks, tWR:3clks, tRCD:3clks, tRC:11clks
+#DATA 4 0x83fd900c 0xC33574AA
+
+#micron mDDR
+# ESDCFG1: tRFC:11clks, tXSR:19clks, tXP:1clks, tWTR:2clk, tRP:3clks, tMRD:2clks
+# tRAS:7clks, tRRD:2clks, tWR:3clks, tRCD:3clks, tRC:9clks
+#DATA 4 0x83FD900C 0x101564a8
+
+#hynix mDDR
+# ESDCFG0: tRFC:17clks, tXSR:21clks, tXP:3clks, tWTR:1clk, tRP:3clks, tMRD:2clks
+# tRAS:7clks, tRRD:2clks, tWR:3clks, tRCD:3clks, tRC:9clks
+DATA 4 0x83FD900C 0x704564a8
+
+# ESDSCR (mDRAM configuration finished)
+DATA 4 0x83FD9014 0x00000004
+
+# ESDSCR - clear "configuration request" bit
+DATA 4 0x83fd9014 0x00000000
diff --git a/board/ttcontrol/vision2/vision2.c b/board/ttcontrol/vision2/vision2.c
new file mode 100644
index 0000000..c991ee2
--- /dev/null
+++ b/board/ttcontrol/vision2/vision2.c
@@ -0,0 +1,711 @@
+/*
+ * (C) Copyright 2010
+ * Stefano Babic, DENX Software Engineering, sbabic@denx.de.
+ *
+ * (C) Copyright 2009 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/imx-regs.h>
+#include <asm/arch/mx51_pins.h>
+#include <asm/arch/crm_regs.h>
+#include <asm/arch/iomux.h>
+#include <mxc_gpio.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/errno.h>
+#include <i2c.h>
+#include <mmc.h>
+#include <fsl_esdhc.h>
+#include <fsl_pmic.h>
+#include <mc13892.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+static u32 system_rev;
+
+#ifdef CONFIG_HW_WATCHDOG
+#include <watchdog.h>
+
+void hw_watchdog_reset(void)
+{
+	int val;
+
+	/* toggle watchdog trigger pin */
+	val = mxc_gpio_get(66);
+	val = val ? 0 : 1;
+	mxc_gpio_set(66, val);
+}
+#endif
+
+static void init_drive_strength(void)
+{
+	mxc_iomux_set_pad(MX51_PIN_CTL_GRP_PKEDDR, PAD_CTL_DDR_INPUT_CMOS);
+	mxc_iomux_set_pad(MX51_PIN_CTL_GRP_PKEADDR, PAD_CTL_PKE_ENABLE);
+	mxc_iomux_set_pad(MX51_PIN_CTL_GRP_DDRAPKS, PAD_CTL_PUE_KEEPER);
+	mxc_iomux_set_pad(MX51_PIN_CTL_GRP_DDRAPUS, PAD_CTL_100K_PU);
+	mxc_iomux_set_pad(MX51_PIN_CTL_GRP_DDR_SR_A1, PAD_CTL_SRE_FAST);
+	mxc_iomux_set_pad(MX51_PIN_CTL_GRP_DDR_A0, PAD_CTL_DRV_HIGH);
+	mxc_iomux_set_pad(MX51_PIN_CTL_GRP_DDR_A1, PAD_CTL_DRV_HIGH);
+	mxc_iomux_set_pad(MX51_PIN_CTL_DRAM_RAS,
+		PAD_CTL_DRV_HIGH | PAD_CTL_SRE_FAST);
+	mxc_iomux_set_pad(MX51_PIN_CTL_DRAM_CAS,
+		PAD_CTL_DRV_HIGH | PAD_CTL_SRE_FAST);
+	mxc_iomux_set_pad(MX51_PIN_CTL_GRP_PKEDDR, PAD_CTL_PKE_ENABLE);
+	mxc_iomux_set_pad(MX51_PIN_CTL_GRP_DDRPKS, PAD_CTL_PUE_KEEPER);
+	mxc_iomux_set_pad(MX51_PIN_CTL_GRP_HYSDDR0, PAD_CTL_HYS_NONE);
+	mxc_iomux_set_pad(MX51_PIN_CTL_GRP_HYSDDR1, PAD_CTL_HYS_NONE);
+	mxc_iomux_set_pad(MX51_PIN_CTL_GRP_HYSDDR2, PAD_CTL_HYS_NONE);
+	mxc_iomux_set_pad(MX51_PIN_CTL_GRP_HYSDDR3, PAD_CTL_HYS_NONE);
+	mxc_iomux_set_pad(MX51_PIN_CTL_GRP_DDR_SR_B0, PAD_CTL_SRE_FAST);
+	mxc_iomux_set_pad(MX51_PIN_CTL_GRP_DDR_SR_B1, PAD_CTL_SRE_FAST);
+	mxc_iomux_set_pad(MX51_PIN_CTL_GRP_DDR_SR_B2, PAD_CTL_SRE_FAST);
+	mxc_iomux_set_pad(MX51_PIN_CTL_GRP_DDR_SR_B4, PAD_CTL_SRE_FAST);
+	mxc_iomux_set_pad(MX51_PIN_CTL_GRP_DDRPUS, PAD_CTL_100K_PU);
+	mxc_iomux_set_pad(MX51_PIN_CTL_GRP_INMODE1, PAD_CTL_DDR_INPUT_CMOS);
+	mxc_iomux_set_pad(MX51_PIN_CTL_GRP_DRAM_B0, PAD_CTL_DRV_MEDIUM);
+	mxc_iomux_set_pad(MX51_PIN_CTL_GRP_DRAM_B1, PAD_CTL_DRV_MEDIUM);
+	mxc_iomux_set_pad(MX51_PIN_CTL_GRP_DRAM_B2, PAD_CTL_DRV_MEDIUM);
+	mxc_iomux_set_pad(MX51_PIN_CTL_GRP_DRAM_B4, PAD_CTL_DRV_MEDIUM);
+
+	/* Setting pad options */
+	mxc_iomux_set_pad(MX51_PIN_CTL_DRAM_SDWE,
+		PAD_CTL_PKE_ENABLE | PAD_CTL_PUE_KEEPER |
+		PAD_CTL_DRV_HIGH | PAD_CTL_SRE_FAST);
+	mxc_iomux_set_pad(MX51_PIN_CTL_DRAM_SDCKE0,
+		PAD_CTL_PKE_ENABLE | PAD_CTL_PUE_KEEPER |
+		PAD_CTL_DRV_HIGH | PAD_CTL_SRE_FAST);
+	mxc_iomux_set_pad(MX51_PIN_CTL_DRAM_SDCKE1,
+		PAD_CTL_PKE_ENABLE | PAD_CTL_PUE_KEEPER |
+		PAD_CTL_DRV_HIGH | PAD_CTL_SRE_FAST);
+	mxc_iomux_set_pad(MX51_PIN_CTL_DRAM_SDCLK,
+		PAD_CTL_PKE_ENABLE | PAD_CTL_PUE_KEEPER |
+		PAD_CTL_DRV_HIGH | PAD_CTL_SRE_FAST);
+	mxc_iomux_set_pad(MX51_PIN_CTL_DRAM_SDQS0,
+		PAD_CTL_PKE_ENABLE | PAD_CTL_PUE_KEEPER |
+		PAD_CTL_DRV_HIGH | PAD_CTL_SRE_FAST);
+	mxc_iomux_set_pad(MX51_PIN_CTL_DRAM_SDQS1,
+		PAD_CTL_PKE_ENABLE | PAD_CTL_PUE_KEEPER |
+		PAD_CTL_DRV_HIGH | PAD_CTL_SRE_FAST);
+	mxc_iomux_set_pad(MX51_PIN_CTL_DRAM_SDQS2,
+		PAD_CTL_PKE_ENABLE | PAD_CTL_PUE_KEEPER |
+		PAD_CTL_DRV_HIGH | PAD_CTL_SRE_FAST);
+	mxc_iomux_set_pad(MX51_PIN_CTL_DRAM_SDQS3,
+		PAD_CTL_PKE_ENABLE | PAD_CTL_PUE_KEEPER |
+		PAD_CTL_DRV_HIGH | PAD_CTL_SRE_FAST);
+	mxc_iomux_set_pad(MX51_PIN_CTL_DRAM_CS0,
+		PAD_CTL_PKE_ENABLE | PAD_CTL_PUE_KEEPER |
+		PAD_CTL_DRV_HIGH | PAD_CTL_SRE_FAST);
+	mxc_iomux_set_pad(MX51_PIN_CTL_DRAM_CS1,
+		PAD_CTL_PKE_ENABLE | PAD_CTL_PUE_KEEPER |
+		PAD_CTL_DRV_HIGH | PAD_CTL_SRE_FAST);
+	mxc_iomux_set_pad(MX51_PIN_CTL_DRAM_DQM0,
+		PAD_CTL_PKE_ENABLE | PAD_CTL_PUE_KEEPER |
+		PAD_CTL_DRV_HIGH | PAD_CTL_SRE_FAST);
+	mxc_iomux_set_pad(MX51_PIN_CTL_DRAM_DQM1,
+		PAD_CTL_PKE_ENABLE | PAD_CTL_PUE_KEEPER |
+		PAD_CTL_DRV_HIGH | PAD_CTL_SRE_FAST);
+	mxc_iomux_set_pad(MX51_PIN_CTL_DRAM_DQM2,
+		PAD_CTL_PKE_ENABLE | PAD_CTL_PUE_KEEPER |
+		PAD_CTL_DRV_HIGH | PAD_CTL_SRE_FAST);
+	mxc_iomux_set_pad(MX51_PIN_CTL_DRAM_DQM3,
+		PAD_CTL_PKE_ENABLE | PAD_CTL_PUE_KEEPER |
+		PAD_CTL_DRV_HIGH | PAD_CTL_SRE_FAST);
+}
+
+u32 get_board_rev(void)
+{
+	system_rev = get_cpu_rev();
+
+	return system_rev;
+}
+
+int dram_init(void)
+{
+#ifdef CONFIG_SYS_ARM_WITHOUT_RELOC
+	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
+	gd->bd->bi_dram[0].size = get_ram_size((long *)PHYS_SDRAM_1,
+		PHYS_SDRAM_1_SIZE);
+#if (CONFIG_NR_DRAM_BANKS > 1)
+	gd->bd->bi_dram[1].start = PHYS_SDRAM_2;
+	gd->bd->bi_dram[1].size = get_ram_size((long *)PHYS_SDRAM_2,
+		PHYS_SDRAM_2_SIZE);
+#endif
+#else
+	gd->ram_size = get_ram_size((long *)PHYS_SDRAM_1,
+		PHYS_SDRAM_1_SIZE);
+#endif
+
+	return 0;
+}
+
+static void setup_weim(void)
+{
+	struct weim  *pweim = (struct weim *)WEIM_BASE_ADDR;
+
+	pweim->csgcr1 = 0x004100b9;
+	pweim->csgcr2 = 0x00000001;
+	pweim->csrcr1 = 0x0a018000;
+	pweim->csrcr2 = 0;
+	pweim->cswcr1 = 0x0704a240;
+}
+
+static void setup_uart(void)
+{
+	unsigned int pad = PAD_CTL_HYS_ENABLE | PAD_CTL_PKE_ENABLE |
+			 PAD_CTL_PUE_PULL | PAD_CTL_DRV_HIGH | PAD_CTL_SRE_FAST;
+	/* console RX on Pin EIM_D25 */
+	mxc_request_iomux(MX51_PIN_EIM_D25, IOMUX_CONFIG_ALT3);
+	mxc_iomux_set_pad(MX51_PIN_EIM_D25, pad);
+	/* console TX on Pin EIM_D26 */
+	mxc_request_iomux(MX51_PIN_EIM_D26, IOMUX_CONFIG_ALT3);
+	mxc_iomux_set_pad(MX51_PIN_EIM_D26, pad);
+}
+
+#ifdef CONFIG_MXC_SPI
+void spi_io_init(void)
+{
+	/* 000: Select mux mode: ALT0 mux port: MOSI of instance: ecspi1 */
+	mxc_request_iomux(MX51_PIN_CSPI1_MOSI, IOMUX_CONFIG_ALT0);
+	mxc_iomux_set_pad(MX51_PIN_CSPI1_MOSI,
+		PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
+
+	/* 000: Select mux mode: ALT0 mux port: MISO of instance: ecspi1. */
+	mxc_request_iomux(MX51_PIN_CSPI1_MISO, IOMUX_CONFIG_ALT0);
+	mxc_iomux_set_pad(MX51_PIN_CSPI1_MISO,
+		PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
+
+	/* 000: Select mux mode: ALT0 mux port: SS0 of instance: ecspi1. */
+	mxc_request_iomux(MX51_PIN_CSPI1_SS0, IOMUX_CONFIG_ALT0);
+	mxc_iomux_set_pad(MX51_PIN_CSPI1_SS0,
+		PAD_CTL_HYS_ENABLE | PAD_CTL_PKE_ENABLE |
+		PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
+
+	/*
+	 * SS1 will be used as GPIO because of uninterrupted
+	 * long SPI transmissions (GPIO4_25)
+	 */
+	mxc_request_iomux(MX51_PIN_CSPI1_SS1, IOMUX_CONFIG_ALT3);
+	mxc_iomux_set_pad(MX51_PIN_CSPI1_SS1,
+		PAD_CTL_HYS_ENABLE | PAD_CTL_PKE_ENABLE |
+		PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
+
+	/* 000: Select mux mode: ALT0 mux port: SS2 of instance: ecspi1. */
+	mxc_request_iomux(MX51_PIN_DI1_PIN11, IOMUX_CONFIG_ALT7);
+	mxc_iomux_set_pad(MX51_PIN_DI1_PIN11,
+		PAD_CTL_HYS_ENABLE | PAD_CTL_PKE_ENABLE |
+		PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
+
+	/* 000: Select mux mode: ALT0 mux port: SCLK of instance: ecspi1. */
+	mxc_request_iomux(MX51_PIN_CSPI1_SCLK, IOMUX_CONFIG_ALT0);
+	mxc_iomux_set_pad(MX51_PIN_CSPI1_SCLK,
+		PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
+}
+
+static void reset_peripherals(int reset)
+{
+	if (reset) {
+
+		/* reset_n is on NANDF_D15 */
+		mxc_gpio_set(89, 0);
+		mxc_gpio_direction(89, MXC_GPIO_DIRECTION_OUT);
+
+#ifdef CONFIG_VISION2_HW_1_0
+		/*
+		 * set FEC Configuration lines
+		 * set levels of FEC config lines
+		 */
+		mxc_gpio_set(75, 0);
+		mxc_gpio_set(74, 1);
+		mxc_gpio_set(95, 1);
+		mxc_gpio_direction(75, MXC_GPIO_DIRECTION_OUT);
+		mxc_gpio_direction(74, MXC_GPIO_DIRECTION_OUT);
+		mxc_gpio_direction(95, MXC_GPIO_DIRECTION_OUT);
+
+		/* set direction of FEC config lines */
+		mxc_gpio_set(59, 0);
+		mxc_gpio_set(60, 0);
+		mxc_gpio_set(61, 0);
+		mxc_gpio_set(55, 1);
+		mxc_gpio_direction(59, MXC_GPIO_DIRECTION_OUT);
+		mxc_gpio_direction(60, MXC_GPIO_DIRECTION_OUT);
+		mxc_gpio_direction(61, MXC_GPIO_DIRECTION_OUT);
+		mxc_gpio_direction(55, MXC_GPIO_DIRECTION_OUT);
+
+		/* FEC_RXD1 - sel GPIO (2-23) for configuration -> 1 */
+		mxc_request_iomux(MX51_PIN_EIM_EB3, IOMUX_CONFIG_ALT1);
+		/* FEC_RXD2 - sel GPIO (2-27) for configuration -> 0 */
+		mxc_request_iomux(MX51_PIN_EIM_CS2, IOMUX_CONFIG_ALT1);
+		/* FEC_RXD3 - sel GPIO (2-28) for configuration -> 0 */
+		mxc_request_iomux(MX51_PIN_EIM_CS3, IOMUX_CONFIG_ALT1);
+		/* FEC_RXER - sel GPIO (2-29) for configuration -> 0 */
+		mxc_request_iomux(MX51_PIN_EIM_CS4, IOMUX_CONFIG_ALT1);
+		/* FEC_COL  - sel GPIO (3-10) for configuration -> 1 */
+		mxc_request_iomux(MX51_PIN_NANDF_RB2, IOMUX_CONFIG_ALT3);
+		/* FEC_RCLK - sel GPIO (3-11) for configuration -> 0 */
+		mxc_request_iomux(MX51_PIN_NANDF_RB3, IOMUX_CONFIG_ALT3);
+		/* FEC_RXD0 - sel GPIO (3-31) for configuration -> 1 */
+		mxc_request_iomux(MX51_PIN_NANDF_D9, IOMUX_CONFIG_ALT3);
+#endif
+
+		/*
+		 * activate reset_n pin
+		 * Select mux mode: ALT3 mux port: NAND D15
+		 */
+		mxc_request_iomux(MX51_PIN_NANDF_D15, IOMUX_CONFIG_ALT3);
+		mxc_iomux_set_pad(MX51_PIN_NANDF_D15,
+			PAD_CTL_DRV_VOT_HIGH | PAD_CTL_DRV_MAX);
+	} else {
+		/* set FEC Control lines */
+		mxc_gpio_direction(89, MXC_GPIO_DIRECTION_IN);
+		udelay(500);
+
+#ifdef CONFIG_VISION2_HW_1_0
+		/* FEC RDATA[3] */
+		mxc_request_iomux(MX51_PIN_EIM_CS3, IOMUX_CONFIG_ALT3);
+		mxc_iomux_set_pad(MX51_PIN_EIM_CS3, 0x180);
+
+		/* FEC RDATA[2] */
+		mxc_request_iomux(MX51_PIN_EIM_CS2, IOMUX_CONFIG_ALT3);
+		mxc_iomux_set_pad(MX51_PIN_EIM_CS2, 0x180);
+
+		/* FEC RDATA[1] */
+		mxc_request_iomux(MX51_PIN_EIM_EB3, IOMUX_CONFIG_ALT3);
+		mxc_iomux_set_pad(MX51_PIN_EIM_EB3, 0x180);
+
+		/* FEC RDATA[0] */
+		mxc_request_iomux(MX51_PIN_NANDF_D9, IOMUX_CONFIG_ALT2);
+		mxc_iomux_set_pad(MX51_PIN_NANDF_D9, 0x2180);
+
+		/* FEC RX_CLK */
+		mxc_request_iomux(MX51_PIN_NANDF_RB3, IOMUX_CONFIG_ALT1);
+		mxc_iomux_set_pad(MX51_PIN_NANDF_RB3, 0x2180);
+
+		/* FEC RX_ER */
+		mxc_request_iomux(MX51_PIN_EIM_CS4, IOMUX_CONFIG_ALT3);
+		mxc_iomux_set_pad(MX51_PIN_EIM_CS4, 0x180);
+
+		/* FEC COL */
+		mxc_request_iomux(MX51_PIN_NANDF_RB2, IOMUX_CONFIG_ALT1);
+		mxc_iomux_set_pad(MX51_PIN_NANDF_RB2, 0x2180);
+#endif
+	}
+}
+
+static void power_init_mx51(void)
+{
+	unsigned int val;
+
+	/* Write needed to Power Gate 2 register */
+	val = pmic_reg_read(REG_POWER_MISC);
+
+	/* enable VCAM with 2.775V to enable read from PMIC */
+	val = VCAMCONFIG | VCAMEN;
+	pmic_reg_write(REG_MODE_1, val);
+
+	/*
+	 * Set switchers in Auto in NORMAL mode & STANDBY mode
+	 * Setup the switcher mode for SW1 & SW2
+	 */
+	val = pmic_reg_read(REG_SW_4);
+	val = (val & ~((SWMODE_MASK << SWMODE1_SHIFT) |
+		(SWMODE_MASK << SWMODE2_SHIFT)));
+	val |= (SWMODE_AUTO_AUTO << SWMODE1_SHIFT) |
+		(SWMODE_AUTO_AUTO << SWMODE2_SHIFT);
+	pmic_reg_write(REG_SW_4, val);
+
+	/* Setup the switcher mode for SW3 & SW4 */
+	val = pmic_reg_read(REG_SW_5);
+	val &= ~((SWMODE_MASK << SWMODE4_SHIFT) |
+		(SWMODE_MASK << SWMODE3_SHIFT));
+	val |= (SWMODE_AUTO_AUTO << SWMODE4_SHIFT) |
+		(SWMODE_AUTO_AUTO << SWMODE3_SHIFT);
+	pmic_reg_write(REG_SW_5, val);
+
+
+	/* Set VGEN3 to 1.8V, VCAM to 3.0V */
+	val = pmic_reg_read(REG_SETTING_0);
+	val &= ~(VCAM_MASK | VGEN3_MASK);
+	val |= VCAM_3_0;
+	pmic_reg_write(REG_SETTING_0, val);
+
+	/* Set VVIDEO to 2.775V, VAUDIO to 3V0, VSD to 1.8V */
+	val = pmic_reg_read(REG_SETTING_1);
+	val &= ~(VVIDEO_MASK | VSD_MASK | VAUDIO_MASK);
+	val |= VVIDEO_2_775 | VAUDIO_3_0 | VSD_1_8;
+	pmic_reg_write(REG_SETTING_1, val);
+
+	/* Configure VGEN3 and VCAM regulators to use external PNP */
+	val = VGEN3CONFIG | VCAMCONFIG;
+	pmic_reg_write(REG_MODE_1, val);
+	udelay(200);
+
+	/* Enable VGEN3, VCAM, VAUDIO, VVIDEO, VSD regulators */
+	val = VGEN3EN | VGEN3CONFIG | VCAMEN | VCAMCONFIG |
+		VVIDEOEN | VAUDIOEN  | VSDEN;
+	pmic_reg_write(REG_MODE_1, val);
+
+	val = pmic_reg_read(REG_POWER_CTL2);
+	val |= WDIRESET;
+	pmic_reg_write(REG_POWER_CTL2, val);
+
+	udelay(2500);
+
+}
+#endif
+
+static void setup_gpios(void)
+{
+	unsigned int i;
+
+	/* CAM_SUP_DISn, GPIO1_7 */
+	mxc_request_iomux(MX51_PIN_GPIO1_7, IOMUX_CONFIG_ALT0);
+	mxc_iomux_set_pad(MX51_PIN_GPIO1_7, 0x82);
+
+	/* DAB Display EN, GPIO3_1 */
+	mxc_request_iomux(MX51_PIN_DI1_PIN12, IOMUX_CONFIG_ALT4);
+	mxc_iomux_set_pad(MX51_PIN_DI1_PIN12, 0x82);
+
+	/* WDOG_TRIGGER, GPIO3_2 */
+	mxc_request_iomux(MX51_PIN_DI1_PIN13, IOMUX_CONFIG_ALT4);
+	mxc_iomux_set_pad(MX51_PIN_DI1_PIN13, 0x82);
+
+	/* Now we need to trigger the watchdog */
+	WATCHDOG_RESET();
+
+	/* Display2 TxEN, GPIO3_3 */
+	mxc_request_iomux(MX51_PIN_DI1_D0_CS, IOMUX_CONFIG_ALT4);
+	mxc_iomux_set_pad(MX51_PIN_DI1_D0_CS, 0x82);
+
+	/* DAB Light EN, GPIO3_4 */
+	mxc_request_iomux(MX51_PIN_DI1_D1_CS, IOMUX_CONFIG_ALT4);
+	mxc_iomux_set_pad(MX51_PIN_DI1_D1_CS, 0x82);
+
+	/* AUDIO_MUTE, GPIO3_5 */
+	mxc_request_iomux(MX51_PIN_DISPB2_SER_DIN, IOMUX_CONFIG_ALT4);
+	mxc_iomux_set_pad(MX51_PIN_DISPB2_SER_DIN, 0x82);
+
+	/* SPARE_OUT, GPIO3_6 */
+	mxc_request_iomux(MX51_PIN_DISPB2_SER_DIO, IOMUX_CONFIG_ALT4);
+	mxc_iomux_set_pad(MX51_PIN_DISPB2_SER_DIO, 0x82);
+
+	/* BEEPER_EN, GPIO3_26 */
+	mxc_request_iomux(MX51_PIN_NANDF_D14, IOMUX_CONFIG_ALT3);
+	mxc_iomux_set_pad(MX51_PIN_NANDF_D14, 0x82);
+
+	/* POWER_OFF, GPIO3_27 */
+	mxc_request_iomux(MX51_PIN_NANDF_D13, IOMUX_CONFIG_ALT3);
+	mxc_iomux_set_pad(MX51_PIN_NANDF_D13, 0x82);
+
+	/* FRAM_WE, GPIO3_30 */
+	mxc_request_iomux(MX51_PIN_NANDF_D10, IOMUX_CONFIG_ALT3);
+	mxc_iomux_set_pad(MX51_PIN_NANDF_D10, 0x82);
+
+	/* EXPANSION_EN, GPIO4_26 */
+	mxc_request_iomux(MX51_PIN_CSPI1_RDY, IOMUX_CONFIG_ALT3);
+	mxc_iomux_set_pad(MX51_PIN_CSPI1_RDY, 0x82);
+
+	/*
+	 * Set GPIO1_4 to high and output; it is used to reset
+	 * the system on reboot
+	 */
+	mxc_gpio_set(4, 1);
+	mxc_gpio_direction(4, MXC_GPIO_DIRECTION_OUT);
+
+	mxc_gpio_set(7, 0);
+	mxc_gpio_direction(7, MXC_GPIO_DIRECTION_OUT);
+	for (i = 65; i < 71; i++) {
+		mxc_gpio_set(i, 0);
+		mxc_gpio_direction(i, MXC_GPIO_DIRECTION_OUT);
+	}
+
+	mxc_gpio_set(94, 0);
+	mxc_gpio_direction(94, MXC_GPIO_DIRECTION_OUT);
+
+	/* Set POWER_OFF high */
+	mxc_gpio_set(91, 1);
+	mxc_gpio_direction(91, MXC_GPIO_DIRECTION_OUT);
+
+	mxc_gpio_set(90, 0);
+	mxc_gpio_direction(90, MXC_GPIO_DIRECTION_OUT);
+
+	mxc_gpio_set(122, 0);
+	mxc_gpio_direction(122, MXC_GPIO_DIRECTION_OUT);
+
+	mxc_gpio_set(121, 1);
+	mxc_gpio_direction(121, MXC_GPIO_DIRECTION_OUT);
+
+	WATCHDOG_RESET();
+}
+
+static void setup_fec(void)
+{
+	/*FEC_MDIO*/
+	mxc_request_iomux(MX51_PIN_EIM_EB2, IOMUX_CONFIG_ALT3);
+	mxc_iomux_set_pad(MX51_PIN_EIM_EB2, 0x1FD);
+
+	/*FEC_MDC*/
+	mxc_request_iomux(MX51_PIN_NANDF_CS3, IOMUX_CONFIG_ALT2);
+	mxc_iomux_set_pad(MX51_PIN_NANDF_CS3, 0x2004);
+
+	/* FEC RDATA[3] */
+	mxc_request_iomux(MX51_PIN_EIM_CS3, IOMUX_CONFIG_ALT3);
+	mxc_iomux_set_pad(MX51_PIN_EIM_CS3, 0x180);
+
+	/* FEC RDATA[2] */
+	mxc_request_iomux(MX51_PIN_EIM_CS2, IOMUX_CONFIG_ALT3);
+	mxc_iomux_set_pad(MX51_PIN_EIM_CS2, 0x180);
+
+	/* FEC RDATA[1] */
+	mxc_request_iomux(MX51_PIN_EIM_EB3, IOMUX_CONFIG_ALT3);
+	mxc_iomux_set_pad(MX51_PIN_EIM_EB3, 0x180);
+
+	/* FEC RDATA[0] */
+	mxc_request_iomux(MX51_PIN_NANDF_D9, IOMUX_CONFIG_ALT2);
+	mxc_iomux_set_pad(MX51_PIN_NANDF_D9, 0x2180);
+
+	/* FEC TDATA[3] */
+	mxc_request_iomux(MX51_PIN_NANDF_CS6, IOMUX_CONFIG_ALT2);
+	mxc_iomux_set_pad(MX51_PIN_NANDF_CS6, 0x2004);
+
+	/* FEC TDATA[2] */
+	mxc_request_iomux(MX51_PIN_NANDF_CS5, IOMUX_CONFIG_ALT2);
+	mxc_iomux_set_pad(MX51_PIN_NANDF_CS5, 0x2004);
+
+	/* FEC TDATA[1] */
+	mxc_request_iomux(MX51_PIN_NANDF_CS4, IOMUX_CONFIG_ALT2);
+	mxc_iomux_set_pad(MX51_PIN_NANDF_CS4, 0x2004);
+
+	/* FEC TDATA[0] */
+	mxc_request_iomux(MX51_PIN_NANDF_D8, IOMUX_CONFIG_ALT2);
+	mxc_iomux_set_pad(MX51_PIN_NANDF_D8, 0x2004);
+
+	/* FEC TX_EN */
+	mxc_request_iomux(MX51_PIN_NANDF_CS7, IOMUX_CONFIG_ALT1);
+	mxc_iomux_set_pad(MX51_PIN_NANDF_CS7, 0x2004);
+
+	/* FEC TX_ER */
+	mxc_request_iomux(MX51_PIN_NANDF_CS2, IOMUX_CONFIG_ALT2);
+	mxc_iomux_set_pad(MX51_PIN_NANDF_CS2, 0x2004);
+
+	/* FEC TX_CLK */
+	mxc_request_iomux(MX51_PIN_NANDF_RDY_INT, IOMUX_CONFIG_ALT1);
+	mxc_iomux_set_pad(MX51_PIN_NANDF_RDY_INT, 0x2180);
+
+	/* FEC TX_COL */
+	mxc_request_iomux(MX51_PIN_NANDF_RB2, IOMUX_CONFIG_ALT1);
+	mxc_iomux_set_pad(MX51_PIN_NANDF_RB2, 0x2180);
+
+	/* FEC RX_CLK */
+	mxc_request_iomux(MX51_PIN_NANDF_RB3, IOMUX_CONFIG_ALT1);
+	mxc_iomux_set_pad(MX51_PIN_NANDF_RB3, 0x2180);
+
+	/* FEC RX_CRS */
+	mxc_request_iomux(MX51_PIN_EIM_CS5, IOMUX_CONFIG_ALT3);
+	mxc_iomux_set_pad(MX51_PIN_EIM_CS5, 0x180);
+
+	/* FEC RX_ER */
+	mxc_request_iomux(MX51_PIN_EIM_CS4, IOMUX_CONFIG_ALT3);
+	mxc_iomux_set_pad(MX51_PIN_EIM_CS4, 0x180);
+
+	/* FEC RX_DV */
+	mxc_request_iomux(MX51_PIN_NANDF_D11, IOMUX_CONFIG_ALT2);
+	mxc_iomux_set_pad(MX51_PIN_NANDF_D11, 0x2180);
+}
+
+struct fsl_esdhc_cfg esdhc_cfg[1] = {
+	{MMC_SDHC1_BASE_ADDR, 1},
+};
+
+int get_mmc_getcd(u8 *cd, struct mmc *mmc)
+{
+	struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;
+
+	if (cfg->esdhc_base == MMC_SDHC1_BASE_ADDR)
+		*cd = mxc_gpio_get(0);
+	else
+		*cd = 0;
+
+	return 0;
+}
+
+#ifdef CONFIG_FSL_ESDHC
+int board_mmc_init(bd_t *bis)
+{
+	mxc_request_iomux(MX51_PIN_SD1_CMD,
+		IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION);
+	mxc_request_iomux(MX51_PIN_SD1_CLK,
+		IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION);
+	mxc_request_iomux(MX51_PIN_SD1_DATA0,
+		IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION);
+	mxc_request_iomux(MX51_PIN_SD1_DATA1,
+		IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION);
+	mxc_request_iomux(MX51_PIN_SD1_DATA2,
+		IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION);
+	mxc_request_iomux(MX51_PIN_SD1_DATA3,
+		IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION);
+	mxc_iomux_set_pad(MX51_PIN_SD1_CMD,
+		PAD_CTL_DRV_MAX | PAD_CTL_DRV_VOT_HIGH |
+		PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU |
+		PAD_CTL_PUE_PULL |
+		PAD_CTL_PKE_ENABLE | PAD_CTL_SRE_FAST);
+	mxc_iomux_set_pad(MX51_PIN_SD1_CLK,
+		PAD_CTL_DRV_MAX | PAD_CTL_DRV_VOT_HIGH |
+		PAD_CTL_HYS_NONE | PAD_CTL_47K_PU |
+		PAD_CTL_PUE_PULL |
+		PAD_CTL_PKE_ENABLE | PAD_CTL_SRE_FAST);
+	mxc_iomux_set_pad(MX51_PIN_SD1_DATA0,
+		PAD_CTL_DRV_MAX | PAD_CTL_DRV_VOT_HIGH |
+		PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU |
+		PAD_CTL_PUE_PULL |
+		PAD_CTL_PKE_ENABLE | PAD_CTL_SRE_FAST);
+	mxc_iomux_set_pad(MX51_PIN_SD1_DATA1,
+		PAD_CTL_DRV_MAX | PAD_CTL_DRV_VOT_HIGH |
+		PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU |
+		PAD_CTL_PUE_PULL |
+		PAD_CTL_PKE_ENABLE | PAD_CTL_SRE_FAST);
+	mxc_iomux_set_pad(MX51_PIN_SD1_DATA2,
+		PAD_CTL_DRV_MAX | PAD_CTL_DRV_VOT_HIGH |
+		PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU |
+		PAD_CTL_PUE_PULL |
+		PAD_CTL_PKE_ENABLE | PAD_CTL_SRE_FAST);
+	mxc_iomux_set_pad(MX51_PIN_SD1_DATA3,
+		PAD_CTL_DRV_MAX | PAD_CTL_DRV_VOT_HIGH |
+		PAD_CTL_HYS_ENABLE | PAD_CTL_100K_PD |
+		PAD_CTL_PUE_PULL |
+		PAD_CTL_PKE_ENABLE | PAD_CTL_SRE_FAST);
+	mxc_request_iomux(MX51_PIN_GPIO1_0,
+		IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION);
+	mxc_iomux_set_pad(MX51_PIN_GPIO1_0,
+		PAD_CTL_HYS_ENABLE);
+	mxc_request_iomux(MX51_PIN_GPIO1_1,
+		IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION);
+	mxc_iomux_set_pad(MX51_PIN_GPIO1_1,
+		PAD_CTL_HYS_ENABLE);
+
+	return fsl_esdhc_initialize(bis, &esdhc_cfg[0]);
+}
+#endif
+
+int board_early_init_f(void)
+{
+
+
+	init_drive_strength();
+
+	/* Setup debug led */
+	mxc_gpio_set(6, 0);
+	mxc_gpio_direction(6, MXC_GPIO_DIRECTION_OUT);
+	mxc_request_iomux(MX51_PIN_GPIO1_6, IOMUX_CONFIG_ALT0);
+	mxc_iomux_set_pad(MX51_PIN_GPIO1_6, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
+
+	/* wait a little while to give the pll time to settle */
+	sdelay(100000);
+
+	setup_weim();
+	setup_uart();
+	setup_fec();
+	setup_gpios();
+
+	spi_io_init();
+
+	return 0;
+}
+
+int board_init(void)
+{
+#ifdef CONFIG_SYS_ARM_WITHOUT_RELOC
+	board_early_init_f();
+#endif
+	gd->bd->bi_arch_number = MACH_TYPE_TTC_VISION2;	/* board id for linux */
+	/* address of boot parameters */
+	gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
+
+	return 0;
+}
+
+int board_late_init(void)
+{
+	power_init_mx51();
+
+	reset_peripherals(1);
+	udelay(2000);
+	reset_peripherals(0);
+	udelay(2000);
+
+	/* Early revisions require a second reset */
+#ifdef CONFIG_VISION2_HW_1_0
+	reset_peripherals(1);
+	udelay(2000);
+	reset_peripherals(0);
+	udelay(2000);
+#endif
+
+	return 0;
+}
+
+int checkboard(void)
+{
+	u32 system_rev = get_cpu_rev();
+	u32 cause;
+	struct src *src_regs = (struct src *)SRC_BASE_ADDR;
+
+	puts("Board: TTControl Vision II CPU V");
+
+	switch (system_rev & 0xff) {
+	case CHIP_REV_3_0:
+		puts("3.0 [");
+		break;
+	case CHIP_REV_2_5:
+		puts("2.5 [");
+		break;
+	case CHIP_REV_2_0:
+		puts("2.0 [");
+		break;
+	case CHIP_REV_1_1:
+		puts("1.1 [");
+		break;
+	case CHIP_REV_1_0:
+	default:
+		puts("1.0 [");
+		break;
+	}
+
+	cause = src_regs->srsr;
+	switch (cause) {
+	case 0x0001:
+		puts("POR");
+		break;
+	case 0x0009:
+		puts("RST");
+		break;
+	case 0x0010:
+	case 0x0011:
+		puts("WDOG");
+		break;
+	default:
+		printf("unknown 0x%x", cause);
+	}
+	puts("]\n");
+
+	return 0;
+}
+
diff --git a/boards.cfg b/boards.cfg
index 9226424..132d178 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -47,6 +47,7 @@ jadecpu		arm	arm926ejs	jadecpu		syteco		mb86r0x
 suen3		arm	arm926ejs	km_arm		keymile		kirkwood
 rd6281a		arm	arm926ejs	-		Marvell		kirkwood
 mx51evk		arm	armv7		mx51evk		freescale	mx51
+vision2		arm	armv7		vision2		ttcontrol	mx51
 actux1		arm	ixp
 actux2		arm	ixp
 actux3		arm	ixp
@@ -252,6 +253,7 @@ imx27lite	arm	arm926ejs	imx27lite	logicpd		mx27
 magnesium	arm	arm926ejs	imx27lite	logicpd		mx27
 omap5912osk	arm	arm926ejs	-		ti		omap
 edminiv2	arm	arm926ejs	-		LaCie		orion5x
+ca9x4_ct_vxp	arm	armv7		vexpress	armltd
 omap3_overo	arm	armv7		overo		-		omap3
 omap3_pandora	arm	armv7		pandora		-		omap3
 omap3_zoom1	arm	armv7		zoom1		logicpd		omap3
diff --git a/drivers/block/mvsata_ide.c b/drivers/block/mvsata_ide.c
index 077b278..3d6993a 100644
--- a/drivers/block/mvsata_ide.c
+++ b/drivers/block/mvsata_ide.c
@@ -91,29 +91,48 @@ struct mvsata_port_registers {
 #define MVSATA_SSTATUS_DET_DEVCOMM		0x00000003
 
 /*
+ * Status codes to return to client callers. Currently, callers ignore
+ * exact value and only care for zero or nonzero, so no need to make this
+ * public, it is only #define'd for clarity.
+ * If/when standard negative codes are implemented in U-boot, then these
+ * #defines should be moved to, or replaced by ones from, the common list
+ * of status codes.
+ */
+
+#define MVSATA_STATUS_OK	0
+#define MVSATA_STATUS_TIMEOUT	-1
+
+/*
  * Initialize one MVSATAHC port: set SControl's IPM to "always active"
  * and DET to "reset", then wait for SStatus's DET to become "device and
  * comm ok" (or time out after 50 us if no device), then set SControl's
  * DET back to "no action".
  */
 
-static void mvsata_ide_initialize_port(struct mvsata_port_registers *port)
+static int mvsata_ide_initialize_port(struct mvsata_port_registers *port)
 {
 	u32 control;
 	u32 status;
-	u32 tout = 50; /* wait at most 50 us for SATA reset to complete */
+	u32 timeleft = 10000; /* wait at most 10 ms for SATA reset to complete */
 
+	/* Set control IPM to 3 (no low power) and DET to 1 (initialize) */
 	control = readl(&port->scontrol);
 	control = (control & ~MVSATA_SCONTROL_MASK) | MVSATA_PORT_INIT;
 	writel(control, &port->scontrol);
-	while (--tout) {
+	/* Toggle control DET back to 0 (normal operation) */
+	control = (control & ~MVSATA_SCONTROL_MASK) | MVSATA_PORT_USE;
+	writel(control, &port->scontrol);
+	/* wait for status DET to become 3 (device and communication OK) */
+	while (--timeleft) {
 		status = readl(&port->sstatus) & MVSATA_SSTATUS_DET_MASK;
 		if (status == MVSATA_SSTATUS_DET_DEVCOMM)
 			break;
 		udelay(1);
 	}
-	control = (control & ~MVSATA_SCONTROL_MASK) | MVSATA_PORT_USE;
-	writel(control, &port->scontrol);
+	/* return success or time-out error depending on time left */
+	if (!timeleft)
+		return MVSATA_STATUS_TIMEOUT;
+	return MVSATA_STATUS_OK;
 }
 
 /*
@@ -123,18 +142,23 @@ static void mvsata_ide_initialize_port(struct mvsata_port_registers *port)
 
 int ide_preinit(void)
 {
+	int status;
 	/* Enable ATA port 0 (could be SATA port 0 or 1) if declared */
 #if defined(CONFIG_SYS_ATA_IDE0_OFFSET)
-	mvsata_ide_initialize_port(
+	status = mvsata_ide_initialize_port(
 		(struct mvsata_port_registers *)
 		(CONFIG_SYS_ATA_BASE_ADDR + CONFIG_SYS_ATA_IDE0_OFFSET));
+	if (status)
+		return status;
 #endif
 	/* Enable ATA port 1 (could be SATA port 0 or 1) if declared */
 #if defined(CONFIG_SYS_ATA_IDE1_OFFSET)
-	mvsata_ide_initialize_port(
+	status = mvsata_ide_initialize_port(
 		(struct mvsata_port_registers *)
 		(CONFIG_SYS_ATA_BASE_ADDR + CONFIG_SYS_ATA_IDE1_OFFSET));
+	if (status)
+		return status;
 #endif
-	/* return 0 as we always succeed */
-	return 0;
+	/* return success if all ports initializations succeeded */
+	return MVSATA_STATUS_OK;
 }
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index 07d395d..a0f4552 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -27,7 +27,7 @@ LIB 	:= $(obj)libgpio.a
 
 COBJS-$(CONFIG_AT91_GPIO)	+= at91_gpio.o
 COBJS-$(CONFIG_KIRKWOOD_GPIO)	+= kw_gpio.o
-COBJS-$(CONFIG_MX31_GPIO)	+= mx31_gpio.o
+COBJS-$(CONFIG_MXC_GPIO)	+= mxc_gpio.o
 COBJS-$(CONFIG_PCA953X)		+= pca953x.o
 COBJS-$(CONFIG_S5P)		+= s5p_gpio.o
 
diff --git a/drivers/gpio/mx31_gpio.c b/drivers/gpio/mxc_gpio.c
index b07f038..663141f 100644
--- a/drivers/gpio/mx31_gpio.c
+++ b/drivers/gpio/mxc_gpio.c
@@ -21,19 +21,29 @@
  * MA 02111-1307 USA
  */
 #include <common.h>
-#include <asm/arch/mx31.h>
+#ifdef CONFIG_MX31
 #include <asm/arch/mx31-regs.h>
+#endif
+#ifdef CONFIG_MX51
+#include <asm/arch/imx-regs.h>
+#endif
+#include <asm/io.h>
+#include <mxc_gpio.h>
 
 /* GPIO port description */
 static unsigned long gpio_ports[] = {
-	[0] = GPIO1_BASE,
-	[1] = GPIO2_BASE,
-	[2] = GPIO3_BASE,
+	[0] = GPIO1_BASE_ADDR,
+	[1] = GPIO2_BASE_ADDR,
+	[2] = GPIO3_BASE_ADDR,
+#ifdef CONFIG_MX51
+	[3] = GPIO4_BASE_ADDR,
+#endif
 };
 
-int mx31_gpio_direction(unsigned int gpio, enum mx31_gpio_direction direction)
+int mxc_gpio_direction(unsigned int gpio, enum mxc_gpio_direction direction)
 {
 	unsigned int port = gpio >> 5;
+	struct gpio_regs *regs;
 	u32 l;
 
 	if (port >= ARRAY_SIZE(gpio_ports))
@@ -41,22 +51,26 @@ int mx31_gpio_direction(unsigned int gpio, enum mx31_gpio_direction direction)
 
 	gpio &= 0x1f;
 
-	l = __REG(gpio_ports[port] + GPIO_GDIR);
+	regs = (struct gpio_regs *)gpio_ports[port];
+
+	l = readl(&regs->gpio_dir);
+
 	switch (direction) {
-	case MX31_GPIO_DIRECTION_OUT:
+	case MXC_GPIO_DIRECTION_OUT:
 		l |= 1 << gpio;
 		break;
-	case MX31_GPIO_DIRECTION_IN:
+	case MXC_GPIO_DIRECTION_IN:
 		l &= ~(1 << gpio);
 	}
-	__REG(gpio_ports[port] + GPIO_GDIR) = l;
+	writel(l, &regs->gpio_dir);
 
 	return 0;
 }
 
-void mx31_gpio_set(unsigned int gpio, unsigned int value)
+void mxc_gpio_set(unsigned int gpio, unsigned int value)
 {
 	unsigned int port = gpio >> 5;
+	struct gpio_regs *regs;
 	u32 l;
 
 	if (port >= ARRAY_SIZE(gpio_ports))
@@ -64,17 +78,20 @@ void mx31_gpio_set(unsigned int gpio, unsigned int value)
 
 	gpio &= 0x1f;
 
-	l = __REG(gpio_ports[port] + GPIO_DR);
+	regs = (struct gpio_regs *)gpio_ports[port];
+
+	l = readl(&regs->gpio_dr);
 	if (value)
 		l |= 1 << gpio;
 	else
 		l &= ~(1 << gpio);
-	__REG(gpio_ports[port] + GPIO_DR) = l;
+	writel(l, &regs->gpio_dr);
 }
 
-int mx31_gpio_get(unsigned int gpio)
+int mxc_gpio_get(unsigned int gpio)
 {
 	unsigned int port = gpio >> 5;
+	struct gpio_regs *regs;
 	u32 l;
 
 	if (port >= ARRAY_SIZE(gpio_ports))
@@ -82,7 +99,9 @@ int mx31_gpio_get(unsigned int gpio)
 
 	gpio &= 0x1f;
 
-	l = (__REG(gpio_ports[port] + GPIO_DR) >> gpio) & 0x01;
+	regs = (struct gpio_regs *)gpio_ports[port];
+
+	l = (readl(&regs->gpio_dr) >> gpio) & 0x01;
 
 	return l;
 }
diff --git a/drivers/misc/fsl_pmic.c b/drivers/misc/fsl_pmic.c
index dca0a1d..5ee1de1 100644
--- a/drivers/misc/fsl_pmic.c
+++ b/drivers/misc/fsl_pmic.c
@@ -46,6 +46,7 @@ void pmic_spi_free(struct spi_slave *slave)
 u32 pmic_reg(u32 reg, u32 val, u32 write)
 {
 	u32 pmic_tx, pmic_rx;
+	u32 tmp;
 
 	if (!slave) {
 		slave = pmic_spi_probe();
@@ -65,7 +66,9 @@ u32 pmic_reg(u32 reg, u32 val, u32 write)
 
 	pmic_tx = (write << 31) | (reg << 25) | (val & 0x00FFFFFF);
 
-	if (spi_xfer(slave, 4 << 3, &pmic_tx, &pmic_rx,
+	tmp = cpu_to_be32(pmic_tx);
+
+	if (spi_xfer(slave, 4 << 3, &tmp, &pmic_rx,
 			SPI_XFER_BEGIN | SPI_XFER_END)) {
 		spi_release_bus(slave);
 		return -1;
@@ -73,7 +76,8 @@ u32 pmic_reg(u32 reg, u32 val, u32 write)
 
 	if (write) {
 		pmic_tx &= ~(1 << 31);
-		if (spi_xfer(slave, 4 << 3, &pmic_tx, &pmic_rx,
+		tmp = cpu_to_be32(pmic_tx);
+		if (spi_xfer(slave, 4 << 3, &tmp, &pmic_rx,
 			SPI_XFER_BEGIN | SPI_XFER_END)) {
 			spi_release_bus(slave);
 			return -1;
@@ -81,7 +85,7 @@ u32 pmic_reg(u32 reg, u32 val, u32 write)
 	}
 
 	spi_release_bus(slave);
-	return pmic_rx;
+	return cpu_to_be32(pmic_rx);
 }
 
 void pmic_reg_write(u32 reg, u32 value)
diff --git a/drivers/net/at91_emac.c b/drivers/net/at91_emac.c
index c525eed..4e5685c 100644
--- a/drivers/net/at91_emac.c
+++ b/drivers/net/at91_emac.c
@@ -127,13 +127,19 @@ void at91emac_DisableMDIO(at91_emac_t *at91mac)
 int  at91emac_read(at91_emac_t *at91mac, unsigned char addr,
 		unsigned char reg, unsigned short *value)
 {
+	unsigned long netstat;
 	at91emac_EnableMDIO(at91mac);
 
 	writel(AT91_EMAC_MAN_HIGH | AT91_EMAC_MAN_RW_R |
 		AT91_EMAC_MAN_REGA(reg) | AT91_EMAC_MAN_CODE_802_3 |
 		AT91_EMAC_MAN_PHYA(addr),
 		&at91mac->man);
-	udelay(10000);
+
+	do {
+		netstat = readl(&at91mac->sr);
+		DEBUG_AT91PHY("poll SR %08lx\n", netstat);
+	} while (!(netstat & AT91_EMAC_SR_IDLE));
+
 	*value = readl(&at91mac->man) & AT91_EMAC_MAN_DATA_MASK;
 
 	at91emac_DisableMDIO(at91mac);
@@ -146,6 +152,7 @@ int  at91emac_read(at91_emac_t *at91mac, unsigned char addr,
 int  at91emac_write(at91_emac_t *at91mac, unsigned char addr,
 		unsigned char reg, unsigned short value)
 {
+	unsigned long netstat;
 	DEBUG_AT91PHY("AT91PHY write %x REG(%d)=%x\n", at91mac, reg, &value)
 
 	at91emac_EnableMDIO(at91mac);
@@ -154,9 +161,14 @@ int  at91emac_write(at91_emac_t *at91mac, unsigned char addr,
 		AT91_EMAC_MAN_REGA(reg) | AT91_EMAC_MAN_CODE_802_3 |
 		AT91_EMAC_MAN_PHYA(addr) | (value & AT91_EMAC_MAN_DATA_MASK),
 		&at91mac->man);
-	udelay(10000);
+
+	do {
+		netstat = readl(&at91mac->sr);
+		DEBUG_AT91PHY("poll SR %08lx\n", netstat);
+	} while (!(netstat & AT91_EMAC_SR_IDLE));
 
 	at91emac_DisableMDIO(at91mac);
+
 	return 0;
 }
 
@@ -500,11 +512,7 @@ int at91emac_register(bd_t *bis, unsigned long iobase)
 	memset(emacfix, 0, sizeof(emac_device));
 
 	memset(dev, 0, sizeof(*dev));
-#ifndef CONFIG_RMII
-	sprintf(dev->name, "AT91 EMAC");
-#else
-	sprintf(dev->name, "AT91 EMAC RMII");
-#endif
+	sprintf(dev->name, "emac");
 	dev->iobase = iobase;
 	dev->priv = emacfix;
 	dev->init = at91emac_init;
diff --git a/drivers/serial/atmel_usart.c b/drivers/serial/atmel_usart.c
index cad3412..bfa1f3a 100644
--- a/drivers/serial/atmel_usart.c
+++ b/drivers/serial/atmel_usart.c
@@ -1,6 +1,9 @@
 /*
  * Copyright (C) 2004-2006 Atmel Corporation
  *
+ * Modified to support C structur SoC access by
+ * Andreas Bießmann <biessmann@corscience.de>
+ *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License, or
@@ -16,10 +19,6 @@
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 #include <common.h>
-#ifndef CONFIG_AT91_LEGACY
-#define CONFIG_AT91_LEGACY
-#warning Please update to use C structur SoC access !
-#endif
 #include <watchdog.h>
 
 #include <asm/io.h>
@@ -46,6 +45,7 @@ DECLARE_GLOBAL_DATA_PTR;
 
 void serial_setbrg(void)
 {
+	atmel_usart3_t *usart = (atmel_usart3_t*)USART_BASE;
 	unsigned long divisor;
 	unsigned long usart_hz;
 
@@ -56,32 +56,37 @@ void serial_setbrg(void)
 	 */
 	usart_hz = get_usart_clk_rate(USART_ID);
 	divisor = (usart_hz / 16 + gd->baudrate / 2) / gd->baudrate;
-	usart3_writel(BRGR, USART3_BF(CD, divisor));
+	writel(USART3_BF(CD, divisor), &usart->brgr);
 }
 
 int serial_init(void)
 {
-	usart3_writel(CR, USART3_BIT(RSTRX) | USART3_BIT(RSTTX));
+	atmel_usart3_t *usart = (atmel_usart3_t*)USART_BASE;
+
+	writel(USART3_BIT(RSTRX) | USART3_BIT(RSTTX), &usart->cr);
 
 	serial_setbrg();
 
-	usart3_writel(CR, USART3_BIT(RXEN) | USART3_BIT(TXEN));
-	usart3_writel(MR, (USART3_BF(USART_MODE, USART3_USART_MODE_NORMAL)
+	writel(USART3_BIT(RXEN) | USART3_BIT(TXEN), &usart->cr);
+	writel((USART3_BF(USART_MODE, USART3_USART_MODE_NORMAL)
 			   | USART3_BF(USCLKS, USART3_USCLKS_MCK)
 			   | USART3_BF(CHRL, USART3_CHRL_8)
 			   | USART3_BF(PAR, USART3_PAR_NONE)
-			   | USART3_BF(NBSTOP, USART3_NBSTOP_1)));
+			   | USART3_BF(NBSTOP, USART3_NBSTOP_1)),
+			   &usart->mr);
 
 	return 0;
 }
 
 void serial_putc(char c)
 {
+	atmel_usart3_t *usart = (atmel_usart3_t*)USART_BASE;
+
 	if (c == '\n')
 		serial_putc('\r');
 
-	while (!(usart3_readl(CSR) & USART3_BIT(TXRDY))) ;
-	usart3_writel(THR, c);
+	while (!(readl(&usart->csr) & USART3_BIT(TXRDY)));
+	writel(c, &usart->thr);
 }
 
 void serial_puts(const char *s)
@@ -92,12 +97,15 @@ void serial_puts(const char *s)
 
 int serial_getc(void)
 {
-	while (!(usart3_readl(CSR) & USART3_BIT(RXRDY)))
+	atmel_usart3_t *usart = (atmel_usart3_t*)USART_BASE;
+
+	while (!(readl(&usart->csr) & USART3_BIT(RXRDY)))
 		 WATCHDOG_RESET();
-	return usart3_readl(RHR);
+	return readl(&usart->rhr);
 }
 
 int serial_tstc(void)
 {
-	return (usart3_readl(CSR) & USART3_BIT(RXRDY)) != 0;
+	atmel_usart3_t *usart = (atmel_usart3_t*)USART_BASE;
+	return (readl(&usart->csr) & USART3_BIT(RXRDY)) != 0;
 }
diff --git a/drivers/serial/atmel_usart.h b/drivers/serial/atmel_usart.h
index af3773a..7cfc2d5 100644
--- a/drivers/serial/atmel_usart.h
+++ b/drivers/serial/atmel_usart.h
@@ -3,6 +3,9 @@
  *
  * Copyright (C) 2005-2006 Atmel Corporation
  *
+ * Modified to support C structure SoC access by
+ * Andreas Bießmann <biessmann@corscience.de>
+ *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License, or
@@ -20,32 +23,27 @@
 #ifndef __DRIVERS_ATMEL_USART_H__
 #define __DRIVERS_ATMEL_USART_H__
 
-/* USART3 register offsets */
-#define USART3_CR				0x0000
-#define USART3_MR				0x0004
-#define USART3_IER				0x0008
-#define USART3_IDR				0x000c
-#define USART3_IMR				0x0010
-#define USART3_CSR				0x0014
-#define USART3_RHR				0x0018
-#define USART3_THR				0x001c
-#define USART3_BRGR				0x0020
-#define USART3_RTOR				0x0024
-#define USART3_TTGR				0x0028
-#define USART3_FIDI				0x0040
-#define USART3_NER				0x0044
-#define USART3_XXR				0x0048
-#define USART3_IFR				0x004c
-#define USART3_RPR				0x0100
-#define USART3_RCR				0x0104
-#define USART3_TPR				0x0108
-#define USART3_TCR				0x010c
-#define USART3_RNPR				0x0110
-#define USART3_RNCR				0x0114
-#define USART3_TNPR				0x0118
-#define USART3_TNCR				0x011c
-#define USART3_PTCR				0x0120
-#define USART3_PTSR				0x0124
+/* USART3 register footprint */
+typedef struct atmel_usart3 {
+	u32	cr;
+	u32	mr;
+	u32	ier;
+	u32	idr;
+	u32	imr;
+	u32	csr;
+	u32	rhr;
+	u32	thr;
+	u32	brgr;
+	u32	rtor;
+	u32	ttgr;
+	u32	reserved0[5];
+	u32	fidi;
+	u32	ner;
+	u32	reserved1;
+	u32	ifr;
+	u32	man;
+	u32	reserved2[54]; // version and PDC not needed
+} atmel_usart3_t;
 
 /* Bitfields in CR */
 #define USART3_RSTRX_OFFSET			2
@@ -305,10 +303,4 @@
 		    << USART3_##name##_OFFSET))		\
 	 | USART3_BF(name,value))
 
-/* Register access macros */
-#define usart3_readl(reg)				\
-	readl((void *)USART_BASE + USART3_##reg)
-#define usart3_writel(reg,value)			\
-	writel((value), (void *)USART_BASE + USART3_##reg)
-
 #endif /* __DRIVERS_ATMEL_USART_H__ */
diff --git a/drivers/serial/serial_mxc.c b/drivers/serial/serial_mxc.c
index 4b93e7b..f96b21f 100644
--- a/drivers/serial/serial_mxc.c
+++ b/drivers/serial/serial_mxc.c
@@ -18,6 +18,7 @@
  */
 
 #include <common.h>
+#include <watchdog.h>
 #ifdef CONFIG_MX31
 #include <asm/arch/mx31.h>
 #else
@@ -189,7 +190,8 @@ void serial_setbrg (void)
 
 int serial_getc (void)
 {
-	while (__REG(UART_PHYS + UTS) & UTS_RXEMPTY);
+	while (__REG(UART_PHYS + UTS) & UTS_RXEMPTY)
+		WATCHDOG_RESET();
 	return (__REG(UART_PHYS + URXD) & URXD_RX_DATA); /* mask out status from upper word */
 }
 
@@ -198,7 +200,8 @@ void serial_putc (const char c)
 	__REG(UART_PHYS + UTXD) = c;
 
 	/* wait for transmitter to be ready */
-	while(!(__REG(UART_PHYS + UTS) & UTS_TXEMPTY));
+	while (!(__REG(UART_PHYS + UTS) & UTS_TXEMPTY))
+		WATCHDOG_RESET();
 
 	/* If \n, also do \r */
 	if (c == '\n')
diff --git a/drivers/serial/serial_pl01x.c b/drivers/serial/serial_pl01x.c
index c645cef..c0ae947 100644
--- a/drivers/serial/serial_pl01x.c
+++ b/drivers/serial/serial_pl01x.c
@@ -29,25 +29,23 @@
 
 #include <common.h>
 #include <watchdog.h>
-
+#include <asm/io.h>
 #include "serial_pl01x.h"
 
-#define IO_WRITE(addr, val) (*(volatile unsigned int *)(addr) = (val))
-#define IO_READ(addr) (*(volatile unsigned int *)(addr))
-
 /*
  * Integrator AP has two UARTs, we use the first one, at 38400-8-N-1
  * Integrator CP has two UARTs, use the first one, at 38400-8-N-1
  * Versatile PB has four UARTs.
  */
 #define CONSOLE_PORT CONFIG_CONS_INDEX
-#define baudRate CONFIG_BAUDRATE
 static volatile unsigned char *const port[] = CONFIG_PL01x_PORTS;
 #define NUM_PORTS (sizeof(port)/sizeof(port[0]))
 
 static void pl01x_putc (int portnum, char c);
 static int pl01x_getc (int portnum);
 static int pl01x_tstc (int portnum);
+unsigned int baudrate = CONFIG_BAUDRATE;
+DECLARE_GLOBAL_DATA_PTR;
 
 #ifdef CONFIG_PL010_SERIAL
 
@@ -55,16 +53,11 @@ int serial_init (void)
 {
 	unsigned int divisor;
 
-	/*
-	 ** First, disable everything.
-	 */
-	IO_WRITE (port[CONSOLE_PORT] + UART_PL010_CR, 0x0);
+	/* First, disable everything */
+	writel(0x0, port[CONSOLE_PORT] + UART_PL010_CR);
 
-	/*
-	 ** Set baud rate
-	 **
-	 */
-	switch (baudRate) {
+	/* Set baud rate */
+	switch (baudrate) {
 	case 9600:
 		divisor = UART_PL010_BAUD_9600;
 		break;
@@ -89,20 +82,15 @@ int serial_init (void)
 		divisor = UART_PL010_BAUD_38400;
 	}
 
-	IO_WRITE (port[CONSOLE_PORT] + UART_PL010_LCRM,
-		  ((divisor & 0xf00) >> 8));
-	IO_WRITE (port[CONSOLE_PORT] + UART_PL010_LCRL, (divisor & 0xff));
+	writel(((divisor & 0xf00) >> 8), port[CONSOLE_PORT] + UART_PL010_LCRM);
+	writel((divisor & 0xff), port[CONSOLE_PORT] + UART_PL010_LCRL);
 
-	/*
-	 ** Set the UART to be 8 bits, 1 stop bit, no parity, fifo enabled.
-	 */
-	IO_WRITE (port[CONSOLE_PORT] + UART_PL010_LCRH,
-		  (UART_PL010_LCRH_WLEN_8 | UART_PL010_LCRH_FEN));
+	/* Set the UART to be 8 bits, 1 stop bit, no parity, fifo enabled */
+	writel((UART_PL010_LCRH_WLEN_8 | UART_PL010_LCRH_FEN),
+		port[CONSOLE_PORT] + UART_PL010_LCRH);
 
-	/*
-	 ** Finally, enable the UART
-	 */
-	IO_WRITE (port[CONSOLE_PORT] + UART_PL010_CR, (UART_PL010_CR_UARTEN));
+	/* Finally, enable the UART */
+	writel((UART_PL010_CR_UARTEN), port[CONSOLE_PORT] + UART_PL010_CR);
 
 	return 0;
 }
@@ -118,38 +106,31 @@ int serial_init (void)
 	unsigned int remainder;
 	unsigned int fraction;
 
-	/*
-	 ** First, disable everything.
-	 */
-	IO_WRITE (port[CONSOLE_PORT] + UART_PL011_CR, 0x0);
+	/* First, disable everything */
+	writel(0x0, port[CONSOLE_PORT] + UART_PL011_CR);
 
 	/*
-	 ** Set baud rate
-	 **
-	 ** IBRD = UART_CLK / (16 * BAUD_RATE)
-	 ** FBRD = ROUND((64 * MOD(UART_CLK,(16 * BAUD_RATE))) / (16 * BAUD_RATE))
+	 * Set baud rate
+	 *
+	 * IBRD = UART_CLK / (16 * BAUD_RATE)
+	 * FBRD = RND((64 * MOD(UART_CLK,(16 * BAUD_RATE))) / (16 * BAUD_RATE))
 	 */
-	temp = 16 * baudRate;
+	temp = 16 * baudrate;
 	divider = CONFIG_PL011_CLOCK / temp;
 	remainder = CONFIG_PL011_CLOCK % temp;
-	temp = (8 * remainder) / baudRate;
+	temp = (8 * remainder) / baudrate;
 	fraction = (temp >> 1) + (temp & 1);
 
-	IO_WRITE (port[CONSOLE_PORT] + UART_PL011_IBRD, divider);
-	IO_WRITE (port[CONSOLE_PORT] + UART_PL011_FBRD, fraction);
+	writel(divider, port[CONSOLE_PORT] + UART_PL011_IBRD);
+	writel(fraction, port[CONSOLE_PORT] + UART_PL011_FBRD);
 
-	/*
-	 ** Set the UART to be 8 bits, 1 stop bit, no parity, fifo enabled.
-	 */
-	IO_WRITE (port[CONSOLE_PORT] + UART_PL011_LCRH,
-		  (UART_PL011_LCRH_WLEN_8 | UART_PL011_LCRH_FEN));
+	/* Set the UART to be 8 bits, 1 stop bit, no parity, fifo enabled */
+	writel((UART_PL011_LCRH_WLEN_8 | UART_PL011_LCRH_FEN),
+		port[CONSOLE_PORT] + UART_PL011_LCRH);
 
-	/*
-	 ** Finally, enable the UART
-	 */
-	IO_WRITE (port[CONSOLE_PORT] + UART_PL011_CR,
-		  (UART_PL011_CR_UARTEN | UART_PL011_CR_TXE |
-		   UART_PL011_CR_RXE));
+	/* Finally, enable the UART */
+	writel((UART_PL011_CR_UARTEN | UART_PL011_CR_TXE | UART_PL011_CR_RXE),
+		port[CONSOLE_PORT] + UART_PL011_CR);
 
 	return 0;
 }
@@ -183,16 +164,18 @@ int serial_tstc (void)
 
 void serial_setbrg (void)
 {
+	baudrate = gd->baudrate;
+	serial_init();
 }
 
 static void pl01x_putc (int portnum, char c)
 {
 	/* Wait until there is space in the FIFO */
-	while (IO_READ (port[portnum] + UART_PL01x_FR) & UART_PL01x_FR_TXFF)
+	while (readl(port[portnum] + UART_PL01x_FR) & UART_PL01x_FR_TXFF)
 		WATCHDOG_RESET();
 
 	/* Send the character */
-	IO_WRITE (port[portnum] + UART_PL01x_DR, c);
+	writel(c, port[portnum] + UART_PL01x_DR);
 }
 
 static int pl01x_getc (int portnum)
@@ -200,15 +183,15 @@ static int pl01x_getc (int portnum)
 	unsigned int data;
 
 	/* Wait until there is data in the FIFO */
-	while (IO_READ (port[portnum] + UART_PL01x_FR) & UART_PL01x_FR_RXFE)
+	while (readl(port[portnum] + UART_PL01x_FR) & UART_PL01x_FR_RXFE)
 		WATCHDOG_RESET();
 
-	data = IO_READ (port[portnum] + UART_PL01x_DR);
+	data = readl(port[portnum] + UART_PL01x_DR);
 
 	/* Check for an error flag */
 	if (data & 0xFFFFFF00) {
 		/* Clear the error */
-		IO_WRITE (port[portnum] + UART_PL01x_ECR, 0xFFFFFFFF);
+		writel(0xFFFFFFFF, port[portnum] + UART_PL01x_ECR);
 		return -1;
 	}
 
@@ -218,6 +201,6 @@ static int pl01x_getc (int portnum)
 static int pl01x_tstc (int portnum)
 {
 	WATCHDOG_RESET();
-	return !(IO_READ (port[portnum] + UART_PL01x_FR) &
+	return !(readl(port[portnum] + UART_PL01x_FR) &
 		 UART_PL01x_FR_RXFE);
 }
diff --git a/drivers/spi/mxc_spi.c b/drivers/spi/mxc_spi.c
index e15a63c..d558137 100644
--- a/drivers/spi/mxc_spi.c
+++ b/drivers/spi/mxc_spi.c
@@ -23,6 +23,7 @@
 #include <spi.h>
 #include <asm/errno.h>
 #include <asm/io.h>
+#include <mxc_gpio.h>
 
 #ifdef CONFIG_MX27
 /* i.MX27 has a completely wrong register layout and register definitions in the
@@ -61,6 +62,7 @@
 #define MXC_CSPICTRL_MAXBITS	0x1f
 
 #define MXC_CSPIPERIOD_32KHZ	(1 << 15)
+#define MAX_SPI_BYTES	4
 
 static unsigned long spi_bases[] = {
 	0x43fa4000,
@@ -68,9 +70,6 @@ static unsigned long spi_bases[] = {
 	0x53f84000,
 };
 
-#define OUT	MX31_GPIO_DIRECTION_OUT
-#define mxc_gpio_direction	mx31_gpio_direction
-#define mxc_gpio_set		mx31_gpio_set
 #elif defined(CONFIG_MX51)
 #include <asm/arch/imx-regs.h>
 #include <asm/arch/clock.h>
@@ -97,6 +96,7 @@ static unsigned long spi_bases[] = {
 #define MXC_CSPICTRL_RXOVF	(1 << 6)
 
 #define MXC_CSPIPERIOD_32KHZ	(1 << 15)
+#define MAX_SPI_BYTES	32
 
 /* Bit position inside CTRL register to be associated with SS */
 #define MXC_CSPICTRL_CHAN	18
@@ -111,13 +111,12 @@ static unsigned long spi_bases[] = {
 	CSPI2_BASE_ADDR,
 	CSPI3_BASE_ADDR,
 };
-#define mxc_gpio_direction(gpio, dir)	(0)
-#define mxc_gpio_set(gpio, value)	{}
-#define OUT	1
 #else
 #error "Unsupported architecture"
 #endif
 
+#define OUT	MXC_GPIO_DIRECTION_OUT
+
 struct mxc_spi_slave {
 	struct spi_slave slave;
 	unsigned long	base;
@@ -126,6 +125,7 @@ struct mxc_spi_slave {
 	u32		cfg_reg;
 #endif
 	int		gpio;
+	int		ss_pol;
 };
 
 static inline struct mxc_spi_slave *to_mxc_spi_slave(struct spi_slave *slave)
@@ -147,7 +147,7 @@ void spi_cs_activate(struct spi_slave *slave)
 {
 	struct mxc_spi_slave *mxcs = to_mxc_spi_slave(slave);
 	if (mxcs->gpio > 0)
-		mxc_gpio_set(mxcs->gpio, mxcs->ctrl_reg & MXC_CSPICTRL_SSPOL);
+		mxc_gpio_set(mxcs->gpio, mxcs->ss_pol);
 }
 
 void spi_cs_deactivate(struct spi_slave *slave)
@@ -155,7 +155,7 @@ void spi_cs_deactivate(struct spi_slave *slave)
 	struct mxc_spi_slave *mxcs = to_mxc_spi_slave(slave);
 	if (mxcs->gpio > 0)
 		mxc_gpio_set(mxcs->gpio,
-			      !(mxcs->ctrl_reg & MXC_CSPICTRL_SSPOL));
+			      !(mxcs->ss_pol));
 }
 
 #ifdef CONFIG_MX51
@@ -217,7 +217,7 @@ static s32 spi_cfg(struct mxc_spi_slave *mxcs, unsigned int cs,
 	if (mode & SPI_CS_HIGH)
 		ss_pol = 1;
 
-	if (!(mode & SPI_CPOL))
+	if (mode & SPI_CPOL)
 		sclkpol = 1;
 
 	if (mode & SPI_CPHA)
@@ -254,13 +254,15 @@ static s32 spi_cfg(struct mxc_spi_slave *mxcs, unsigned int cs,
 }
 #endif
 
-static u32 spi_xchg_single(struct spi_slave *slave, u32 data, int bitlen,
-			   unsigned long flags)
+int spi_xchg_single(struct spi_slave *slave, unsigned int bitlen,
+	const u8 *dout, u8 *din, unsigned long flags)
 {
 	struct mxc_spi_slave *mxcs = to_mxc_spi_slave(slave);
+	int nbytes = (bitlen + 7) / 8;
+	u32 data, cnt, i;
 
-	if (flags & SPI_XFER_BEGIN)
-		spi_cs_activate(slave);
+	debug("%s: bitlen %d dout 0x%x din 0x%x\n",
+		__func__, bitlen, (u32)dout, (u32)din);
 
 	mxcs->ctrl_reg = (mxcs->ctrl_reg &
 		~MXC_CSPICTRL_BITCOUNT(MXC_CSPICTRL_MAXBITS)) |
@@ -275,8 +277,46 @@ static u32 spi_xchg_single(struct spi_slave *slave, u32 data, int bitlen,
 	reg_write(mxcs->base + MXC_CSPISTAT,
 		MXC_CSPICTRL_TC | MXC_CSPICTRL_RXOVF);
 
-	debug("Sending SPI 0x%x\n", data);
-	reg_write(mxcs->base + MXC_CSPITXDATA, data);
+	/*
+	 * The SPI controller works only with words,
+	 * check if less than a word is sent.
+	 * Access to the FIFO is only 32 bit
+	 */
+	if (bitlen % 32) {
+		data = 0;
+		cnt = (bitlen % 32) / 8;
+		if (dout) {
+			for (i = 0; i < cnt; i++) {
+				data = (data << 8) | (*dout++ & 0xFF);
+			}
+		}
+		debug("Sending SPI 0x%x\n", data);
+
+		reg_write(mxcs->base + MXC_CSPITXDATA, data);
+		nbytes -= cnt;
+	}
+
+	data = 0;
+
+	while (nbytes > 0) {
+		data = 0;
+		if (dout) {
+			/* Buffer is not 32-bit aligned */
+			if ((unsigned long)dout & 0x03) {
+				data = 0;
+				for (i = 0; i < 4; i++, data <<= 8) {
+					data = (data << 8) | (*dout++ & 0xFF);
+				}
+			} else {
+				data = *(u32 *)dout;
+				data = cpu_to_be32(data);
+			}
+			dout += 4;
+		}
+		debug("Sending SPI 0x%x\n", data);
+		reg_write(mxcs->base + MXC_CSPITXDATA, data);
+		nbytes -= 4;
+	}
 
 	/* FIFO is written, now starts the transfer setting the XCH bit */
 	reg_write(mxcs->base + MXC_CSPICTRL, mxcs->ctrl_reg |
@@ -290,49 +330,78 @@ static u32 spi_xchg_single(struct spi_slave *slave, u32 data, int bitlen,
 	reg_write(mxcs->base + MXC_CSPISTAT,
 		MXC_CSPICTRL_TC | MXC_CSPICTRL_RXOVF);
 
-	data = reg_read(mxcs->base + MXC_CSPIRXDATA);
-	debug("SPI Rx: 0x%x\n", data);
+	nbytes = (bitlen + 7) / 8;
 
-	if (flags & SPI_XFER_END)
-		spi_cs_deactivate(slave);
+	cnt = nbytes % 32;
+
+	if (bitlen % 32) {
+		data = reg_read(mxcs->base + MXC_CSPIRXDATA);
+		cnt = (bitlen % 32) / 8;
+		debug("SPI Rx unaligned: 0x%x\n", data);
+		if (din) {
+			for (i = 0; i < cnt; i++, data >>= 8) {
+				*din++ = data & 0xFF;
+			}
+		}
+		nbytes -= cnt;
+	}
 
-	return data;
+	while (nbytes > 0) {
+		u32 tmp;
+		tmp = reg_read(mxcs->base + MXC_CSPIRXDATA);
+		data = cpu_to_be32(tmp);
+		debug("SPI Rx: 0x%x 0x%x\n", tmp, data);
+		cnt = min(nbytes, sizeof(data));
+		if (din) {
+			memcpy(din, &data, cnt);
+			din += cnt;
+		}
+		nbytes -= cnt;
+	}
+
+	return 0;
 
 }
 
+
 int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *dout,
 		void *din, unsigned long flags)
 {
-	int n_blks = (bitlen + 31) / 32;
-	u32 *out_l, *in_l;
-	int i;
+	int n_bytes = (bitlen + 7) / 8;
+	int n_bits;
+	int ret;
+	u32 blk_size;
+	u8 *p_outbuf = (u8 *)dout;
+	u8 *p_inbuf = (u8 *)din;
 
-	if ((int)dout & 3 || (int)din & 3) {
-		printf("Error: unaligned buffers in: %p, out: %p\n", din, dout);
-		return 1;
-	}
+	if (!slave)
+		return -1;
+
+	if (flags & SPI_XFER_BEGIN)
+		spi_cs_activate(slave);
+
+	while (n_bytes > 0) {
+
+		if (n_bytes < MAX_SPI_BYTES)
+			blk_size = n_bytes;
+		else
+			blk_size = MAX_SPI_BYTES;
+
+		n_bits = blk_size * 8;
 
-	/* This driver is currently partly broken, alert the user */
-	if (bitlen > 16 && (bitlen % 32)) {
-		printf("Error: SPI transfer with bitlen=%d is broken.\n",
-		       bitlen);
-		return 1;
+		ret = spi_xchg_single(slave, n_bits, p_outbuf, p_inbuf, 0);
+
+		if (ret)
+			return ret;
+		if (dout)
+			p_outbuf += blk_size;
+		if (din)
+			p_inbuf += blk_size;
+		n_bytes -= blk_size;
 	}
 
-	for (i = 0, in_l = (u32 *)din, out_l = (u32 *)dout;
-	     i < n_blks;
-	     i++, in_l++, out_l++, bitlen -= 32) {
-		u32 data = spi_xchg_single(slave, *out_l, bitlen, flags);
-
-		/* Check if we're only transfering 8 or 16 bits */
-		if (!i) {
-			if (bitlen < 9)
-				*(u8 *)din = data;
-			else if (bitlen < 17)
-				*(u16 *)din = data;
-			else
-				*in_l = data;
-		}
+	if (flags & SPI_XFER_END) {
+		spi_cs_deactivate(slave);
 	}
 
 	return 0;
@@ -380,8 +449,10 @@ struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs,
 		return NULL;
 
 	mxcs = malloc(sizeof(struct mxc_spi_slave));
-	if (!mxcs)
+	if (!mxcs) {
+		puts("mxc_spi: SPI Slave not allocated !\n");
 		return NULL;
+	}
 
 	ret = decode_cs(mxcs, cs);
 	if (ret < 0) {
@@ -394,6 +465,7 @@ struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs,
 	mxcs->slave.bus = bus;
 	mxcs->slave.cs = cs;
 	mxcs->base = spi_bases[bus];
+	mxcs->ss_pol = (mode & SPI_CS_HIGH) ? 1 : 0;
 
 #ifdef CONFIG_MX51
 	/* Can be used for i.MX31 too ? */
@@ -413,7 +485,7 @@ struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs,
 
 	if (mode & SPI_CPHA)
 		ctrl_reg |= MXC_CSPICTRL_PHA;
-	if (!(mode & SPI_CPOL))
+	if (mode & SPI_CPOL)
 		ctrl_reg |= MXC_CSPICTRL_POL;
 	if (mode & SPI_CS_HIGH)
 		ctrl_reg |= MXC_CSPICTRL_SSPOL;
diff --git a/include/configs/ca9x4_ct_vxp.h b/include/configs/ca9x4_ct_vxp.h
new file mode 100644
index 0000000..5547d55
--- /dev/null
+++ b/include/configs/ca9x4_ct_vxp.h
@@ -0,0 +1,196 @@
+/*
+ * (C) Copyright 2010 Linaro
+ * Matt Waddel, <matt.waddel@linaro.org>
+ *
+ * Configuration for Versatile Express. Parts were derived from other ARM
+ *   configurations.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/* Board info register */
+#define SYS_ID				0x10000000
+#define CONFIG_REVISION_TAG		1
+
+/* High Level Configuration Options */
+#define CONFIG_ARMV7			1
+
+#define CONFIG_SYS_MEMTEST_START	0x60000000
+#define CONFIG_SYS_MEMTEST_END		0x20000000
+#define CONFIG_SYS_HZ			1000
+
+#define CONFIG_CMDLINE_TAG		1	/* enable passing of ATAGs */
+#define CONFIG_SETUP_MEMORY_TAGS	1
+#define CONFIG_L2_OFF			1
+#define CONFIG_INITRD_TAG		1
+
+/* Size of malloc() pool */
+#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + 128 * 1024)
+#define CONFIG_SYS_GBL_DATA_SIZE	128
+
+#define SCTL_BASE			0x10001000
+#define VEXPRESS_FLASHPROG_FLVPPEN	(1 << 0)
+
+/* SMSC9115 Ethernet from SMSC9118 family */
+#define CONFIG_NET_MULTI
+#define CONFIG_SMC911X			1
+#define CONFIG_SMC911X_32_BIT		1
+#define CONFIG_SMC911X_BASE		0x4E000000
+
+/* PL011 Serial Configuration */
+#define CONFIG_PL011_SERIAL
+#define CONFIG_PL011_CLOCK		24000000
+#define CONFIG_PL01x_PORTS		{(void *)CONFIG_SYS_SERIAL0, \
+					 (void *)CONFIG_SYS_SERIAL1}
+#define CONFIG_CONS_INDEX		0
+
+#define CONFIG_BAUDRATE			38400
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_SYS_SERIAL0		0x10009000
+#define CONFIG_SYS_SERIAL1		0x1000A000
+
+/* Command line configuration */
+#define CONFIG_CMD_BDI
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_ENV
+#define CONFIG_CMD_FLASH
+#define CONFIG_CMD_IMI
+#define CONFIG_CMD_MEMORY
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_SAVEENV
+#define CONFIG_NET_MULTI
+#define CONFIG_CMD_RUN
+
+#define CONFIG_CMD_FAT
+#define CONFIG_DOS_PARTITION		1
+#define CONFIG_MMC			1
+#define CONFIG_CMD_MMC
+#define CONFIG_GENERIC_MMC
+
+/* BOOTP options */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+/* Miscellaneous configurable options */
+#undef	CONFIG_SYS_CLKS_IN_HZ
+#define CONFIG_SYS_LOAD_ADDR		0x60008000	/* load address */
+#define LINUX_BOOT_PARAM_ADDR		0x60000200
+#define CONFIG_BOOTDELAY		2
+
+/* Stack sizes are set up in start.S using the settings below */
+#define CONFIG_STACKSIZE		(128 * 1024)	/* regular stack */
+#ifdef CONFIG_USE_IRQ
+#define CONFIG_STACKSIZE_IRQ		(4 * 1024)	/* IRQ stack */
+#define CONFIG_STACKSIZE_FIQ		(4 * 1024)	/* FIQ stack */
+#endif
+
+/* Physical Memory Map */
+#define CONFIG_NR_DRAM_BANKS		2
+#define PHYS_SDRAM_1			0x60000000	/* SDRAM Bank #1 */
+#define PHYS_SDRAM_2			0x80000000	/* SDRAM Bank #1 */
+#define PHYS_SDRAM_1_SIZE		0x20000000	/* 512 MB */
+#define PHYS_SDRAM_2_SIZE		0x20000000	/* 512 MB */
+
+/* additions for new relocation code */
+#define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM_1
+#define CONFIG_SYS_INIT_RAM_END		0x1000
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_SDRAM_BASE + \
+					 CONFIG_SYS_INIT_RAM_END - \
+					 CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_ADDR		CONFIG_SYS_GBL_DATA_OFFSET
+
+/* Basic environment settings */
+#define CONFIG_BOOTCOMMAND		"run bootflash;"
+#define CONFIG_EXTRA_ENV_SETTINGS \
+		"loadaddr=0x80008000\0" \
+		"initrd=0x61000000\0" \
+		"kerneladdr=0x44100000\0" \
+		"initrdaddr=0x44800000\0" \
+		"maxinitrd=0x1800000\0" \
+		"console=ttyAMA0,38400n8\0" \
+		"dram=1024M\0" \
+		"root=/dev/sda1 rw\0" \
+		"mtd=armflash:1M@0x800000(uboot),7M@0x1000000(kernel)," \
+			"24M@0x2000000(initrd)\0" \
+		"flashargs=setenv bootargs root=${root} console=${console} " \
+			"mem=${dram} mtdparts=${mtd} mmci.fmax=190000 " \
+			"devtmpfs.mount=0  vmalloc=256M\0" \
+		"bootflash=run flashargs; " \
+			"cp ${initrdaddr} ${initrd} ${maxinitrd}; " \
+			"bootm ${kerneladdr} ${initrd}\0"
+
+/* FLASH and environment organization */
+#define PHYS_FLASH_SIZE			0x04000000	/* 64MB */
+#define CONFIG_SYS_FLASH_CFI		1
+#define CONFIG_FLASH_CFI_DRIVER		1
+#define CONFIG_SYS_FLASH_SIZE		0x04000000
+#define CONFIG_SYS_MAX_FLASH_BANKS	2
+#define CONFIG_SYS_FLASH_BASE0		0x40000000
+#define CONFIG_SYS_FLASH_BASE1		0x44000000
+#define CONFIG_SYS_MONITOR_BASE		CONFIG_SYS_FLASH_BASE0
+
+/* Timeout values in ticks */
+#define CONFIG_SYS_FLASH_ERASE_TOUT	(2 * CONFIG_SYS_HZ) /* Erase Timeout */
+#define CONFIG_SYS_FLASH_WRITE_TOUT	(2 * CONFIG_SYS_HZ) /* Write Timeout */
+
+/* 255 0x40000 sectors + first or last sector may have 4 erase regions = 259 */
+#define CONFIG_SYS_MAX_FLASH_SECT	259		/* Max sectors */
+#define FLASH_MAX_SECTOR_SIZE		0x00040000	/* 256 KB sectors */
+
+/* Room required on the stack for the environment data */
+#define CONFIG_ENV_SIZE			FLASH_MAX_SECTOR_SIZE
+
+/*
+ * Amount of flash used for environment:
+ * We don't know which end has the small erase blocks so we use the penultimate
+ * sector location for the environment
+ */
+#define CONFIG_ENV_SECT_SIZE		FLASH_MAX_SECTOR_SIZE
+#define CONFIG_ENV_OVERWRITE		1
+
+/* Store environment at top of flash */
+#define CONFIG_ENV_IS_IN_FLASH		1
+#define CONFIG_ENV_OFFSET		(PHYS_FLASH_SIZE - \
+					(2 * CONFIG_ENV_SECT_SIZE))
+#define CONFIG_ENV_ADDR			(CONFIG_SYS_FLASH_BASE1 + \
+					 CONFIG_ENV_OFFSET)
+#define CONFIG_SYS_FLASH_PROTECTION	/* The devices have real protection */
+#define CONFIG_SYS_FLASH_EMPTY_INFO	/* flinfo indicates empty blocks */
+#define CONFIG_SYS_FLASH_BANKS_LIST	{ CONFIG_SYS_FLASH_BASE0, \
+					  CONFIG_SYS_FLASH_BASE1 }
+
+/* Monitor Command Prompt */
+#define CONFIG_SYS_CBSIZE		512	/* Console I/O Buffer Size */
+#define CONFIG_SYS_PROMPT		"VExpress# "
+#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + \
+					sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE /* Boot args buffer */
+#define CONFIG_CMD_SOURCE
+#define CONFIG_SYS_LONGHELP
+#define CONFIG_CMDLINE_EDITING		1
+#define CONFIG_SYS_MAXARGS		16	/* max command args */
+
+#endif
diff --git a/include/configs/da850evm.h b/include/configs/da850evm.h
index d02b196..e0a3bae 100644
--- a/include/configs/da850evm.h
+++ b/include/configs/da850evm.h
@@ -138,7 +138,6 @@
 #endif
 
 /* additions for new relocation code, must added to all boards */
-#undef CONFIG_SYS_ARM_WITHOUT_RELOC /* This board is tested with relocation support */
 #define CONFIG_SYS_SDRAM_BASE		0xc0000000
 #define CONFIG_SYS_INIT_SP_ADDR		(CONFIG_SYS_SDRAM_BASE + 0x1000 - /* Fix this */ \
 					CONFIG_SYS_GBL_DATA_SIZE)
diff --git a/include/configs/guruplug.h b/include/configs/guruplug.h
index eb3fa57..2c2682c 100644
--- a/include/configs/guruplug.h
+++ b/include/configs/guruplug.h
@@ -33,59 +33,13 @@
 /*
  * High Level Configuration Options (easy to change)
  */
-#define CONFIG_MARVELL		1
-#define CONFIG_ARM926EJS	1	/* Basic Architecture */
 #define CONFIG_SHEEVA_88SV131	1	/* CPU Core subversion */
 #define CONFIG_KIRKWOOD		1	/* SOC Family Name */
 #define CONFIG_KW88F6281	1	/* SOC Name */
 #define CONFIG_MACH_GURUPLUG	/* Machine type */
-
-#define CONFIG_MD5	/* get_random_hex on krikwood needs MD5 support */
 #define CONFIG_SKIP_LOWLEVEL_INIT	/* disable board lowlevel_init */
-#define CONFIG_KIRKWOOD_EGIGA_INIT	/* Enable GbePort0/1 for kernel */
-#define CONFIG_KIRKWOOD_RGMII_PAD_1V8	/* Set RGMII Pad voltage to 1.8V */
-
-/*
- * CLKs configurations
- */
-#define CONFIG_SYS_HZ		1000
-
-/*
- * NS16550 Configuration
- */
-#define CONFIG_SYS_NS16550
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_REG_SIZE	(-4)
-#define CONFIG_SYS_NS16550_CLK		CONFIG_SYS_TCLK
-#define CONFIG_SYS_NS16550_COM1		KW_UART0_BASE
-
-/*
- * Serial Port configuration
- * The following definitions let you select what serial you want to use
- * for your console driver.
- */
-
-#define CONFIG_CONS_INDEX	1	/*Console on UART0 */
-#define CONFIG_BAUDRATE			115200
-#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, \
-					  115200,230400, 460800, 921600 }
-/* auto boot */
-#define CONFIG_BOOTDELAY	3	/* default enable autoboot */
 
 /*
- * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- */
-#define CONFIG_CMDLINE_TAG	1	/* enable passing of ATAGs  */
-#define CONFIG_INITRD_TAG	1	/* enable INITRD tag */
-#define CONFIG_SETUP_MEMORY_TAGS 1	/* enable memory tag */
-
-#define	CONFIG_SYS_PROMPT	"Marvell>> "	/* Command Prompt */
-#define	CONFIG_SYS_CBSIZE	1024	/* Console I/O Buff Size */
-#define	CONFIG_SYS_PBSIZE	(CONFIG_SYS_CBSIZE \
-		+sizeof(CONFIG_SYS_PROMPT) + 16)	/* Print Buff */
-/*
  * Commands configuration
  */
 #define CONFIG_SYS_NO_FLASH		/* Declare no flash (NOR/SPI) */
@@ -96,18 +50,13 @@
 #define CONFIG_CMD_NAND
 #define CONFIG_CMD_PING
 #define CONFIG_CMD_USB
+#define CONFIG_CMD_IDE
 
 /*
- * NAND configuration
+ * mv-common.h should be defined after CMD configs since it used them
+ * to enable certain macros
  */
-#ifdef CONFIG_CMD_NAND
-#define CONFIG_NAND_KIRKWOOD
-#define CONFIG_SYS_MAX_NAND_DEVICE	1
-#define NAND_MAX_CHIPS			1
-#define CONFIG_SYS_NAND_BASE		0xD8000000	/* KW_DEFADR_NANDF */
-#define NAND_ALLOW_ERASE_ALL		1
-#define CONFIG_SYS_64BIT_VSPRINTF	/* needed for nand_util.c */
-#endif
+#include "mv-common.h"
 
 /*
  *  Environment variables configurations
@@ -143,55 +92,19 @@
 	"x_bootargs_root=ubi.mtd=2 root=ubi0:rootfs rootfstype=ubifs\0"
 
 /*
- * Size of malloc() pool
- */
-#define CONFIG_SYS_MALLOC_LEN	(1024 * 128) /* 128kB for malloc() */
-/* size in bytes reserved for initial data */
-#define CONFIG_SYS_GBL_DATA_SIZE	128
-
-/*
- * Other required configurations
- */
-#define CONFIG_CONSOLE_INFO_QUIET	/* some code reduction */
-#define CONFIG_ARCH_CPU_INIT	/* call arch_cpu_init() */
-#define CONFIG_ARCH_MISC_INIT	/* call arch_misc_init() */
-#define CONFIG_DISPLAY_CPUINFO	/* Display cpu info */
-#define CONFIG_NR_DRAM_BANKS	4
-#define CONFIG_STACKSIZE	0x00100000	/* regular stack- 1M */
-#define CONFIG_SYS_LOAD_ADDR	0x00800000	/* default load adr- 8M */
-#define CONFIG_SYS_MEMTEST_START 0x00800000	/* 8M */
-#define CONFIG_SYS_MEMTEST_END	0x1fffffff	/*(_512M -1) */
-#define CONFIG_SYS_RESET_ADDRESS 0xffff0000	/* Rst Vector Adr */
-#define CONFIG_SYS_MAXARGS	16	/* max number of command args */
-
-/*
  * Ethernet Driver configuration
  */
 #ifdef CONFIG_CMD_NET
-#define CONFIG_NETCONSOLE	/* include NetConsole support   */
-#define CONFIG_NET_MULTI	/* specify more that one ports available */
-#define CONFIG_MII		/* expose smi ove miiphy interface */
-#define CONFIG_CMD_MII
-#define CONFIG_MVGBE		/* Enable Marvell Gbe Controller Driver */
-#define CONFIG_SYS_FAULT_ECHO_LINK_DOWN	/* detect link using phy */
 #define CONFIG_MVGBE_PORTS	{1, 1}	/* enable both ports */
 #define CONFIG_PHY_BASE_ADR	0
-#define CONFIG_ENV_OVERWRITE	/* ethaddr can be reprogrammed */
-#define CONFIG_RESET_PHY_R	/* use reset_phy() to init mv88e1121 PHY */
 #endif /* CONFIG_CMD_NET */
 
 /*
- * USB/EHCI
+ * SATA Driver configuration
  */
-#ifdef CONFIG_CMD_USB
-#define CONFIG_USB_EHCI			/* Enable EHCI USB support */
-#define CONFIG_USB_EHCI_KIRKWOOD	/* on Kirkwood platform	*/
-#define CONFIG_EHCI_IS_TDI
-#define CONFIG_USB_STORAGE
-#define CONFIG_DOS_PARTITION
-#define CONFIG_ISO_PARTITION
-#define CONFIG_SUPPORT_VFAT
-#endif /* CONFIG_CMD_USB */
+#ifdef CONFIG_MVSATA_IDE
+#define CONFIG_SYS_ATA_IDE0_OFFSET	MV_SATA_PORT0_OFFSET
+#endif /*CONFIG_MVSATA_IDE*/
 
 #define CONFIG_SYS_ALT_MEMTEST
 
diff --git a/include/configs/h2_p2_dbg_board.h b/include/configs/h2_p2_dbg_board.h
index e0d823f..a4dea7d 100644
--- a/include/configs/h2_p2_dbg_board.h
+++ b/include/configs/h2_p2_dbg_board.h
@@ -31,7 +31,7 @@
 #ifndef __INCLUDED_H2_P2_DBH_BOARD_H
 #define __INCLUDED_H2_P2_DBH_BOARD_H
 
-#include <asm/arch/sizes.h>
+#include <asm/sizes.h>
 
 /*
  * The Debug board is designed to function with the P2 Sample, H2
diff --git a/include/configs/imx27lite-common.h b/include/configs/imx27lite-common.h
index 812e5f2..88e8d3d 100644
--- a/include/configs/imx27lite-common.h
+++ b/include/configs/imx27lite-common.h
@@ -235,8 +235,7 @@
 	"mtdids=" MTDIDS_DEFAULT "\0"					\
 	"mtdparts=" MTDPARTS_DEFAULT "\0"				\
 
-/* additions for new relocation code, must added to all boards */
-#undef CONFIG_SYS_ARM_WITHOUT_RELOC /* This board is tested with relocation support */
+/* additions for new relocation code, must be added to all boards */
 #define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM_1
 #define CONFIG_SYS_INIT_SP_ADDR		(CONFIG_SYS_SDRAM_BASE + 0x1000 - /* Fix this */ \
 					CONFIG_SYS_GBL_DATA_SIZE)
diff --git a/include/configs/imx31_litekit.h b/include/configs/imx31_litekit.h
index 4904856..88c62d1 100644
--- a/include/configs/imx31_litekit.h
+++ b/include/configs/imx31_litekit.h
@@ -66,13 +66,13 @@
 #define CONFIG_HARD_SPI		1
 #define CONFIG_MXC_SPI		1
 #define CONFIG_DEFAULT_SPI_BUS	1
-#define CONFIG_DEFAULT_SPI_MODE	(SPI_MODE_2 | SPI_CS_HIGH)
+#define CONFIG_DEFAULT_SPI_MODE	(SPI_MODE_0 | SPI_CS_HIGH)
 
 #define CONFIG_FSL_PMIC
 #define CONFIG_FSL_PMIC_BUS	1
 #define CONFIG_FSL_PMIC_CS	0
 #define CONFIG_FSL_PMIC_CLK	1000000
-#define CONFIG_FSL_PMIC_MODE	(SPI_MODE_2 | SPI_CS_HIGH)
+#define CONFIG_FSL_PMIC_MODE	(SPI_MODE_0 | SPI_CS_HIGH)
 
 #define CONFIG_RTC_MC13783	1
 
diff --git a/include/configs/imx31_phycore.h b/include/configs/imx31_phycore.h
index 1dbafa0..62944a9 100644
--- a/include/configs/imx31_phycore.h
+++ b/include/configs/imx31_phycore.h
@@ -183,7 +183,7 @@
 #ifdef CONFIG_IMX31_PHYCORE_EET
 #define BOARD_LATE_INIT
 
-#define CONFIG_MX31_GPIO			1
+#define CONFIG_MXC_GPIO
 
 #define CONFIG_HARD_SPI				1
 #define CONFIG_MXC_SPI				1
diff --git a/include/configs/keymile-common.h b/include/configs/keymile-common.h
index 6c14ca0..62d21f6 100644
--- a/include/configs/keymile-common.h
+++ b/include/configs/keymile-common.h
@@ -85,6 +85,7 @@
 
 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download */
 #define CONFIG_SYS_LOADS_BAUD_CHANGE	1	/* allow baudrate change */
+#define CONFIG_SYS_BOARD_DRAM_INIT	/* Used board specific dram_init */
 
 /*
  * How to get access to the slot ID.  Put this here to make it easy
diff --git a/include/configs/km_arm.h b/include/configs/km_arm.h
index 8673e6f..faa0f50 100644
--- a/include/configs/km_arm.h
+++ b/include/configs/km_arm.h
@@ -180,7 +180,7 @@ int get_scl (void);
 #undef	CONFIG_JFFS2_CMDLINE
 #endif
 
-/* additions for new relocation code, must added to all boards */
+/* additions for new relocation code, must be added to all boards */
 #define CONFIG_SYS_SDRAM_BASE		0x00000000
 #define CONFIG_SYS_INIT_SP_ADDR		(0x00000000 + 0x1000 - /* Fix this */ \
 					CONFIG_SYS_GBL_DATA_SIZE)
diff --git a/include/configs/mv-common.h b/include/configs/mv-common.h
new file mode 100644
index 0000000..bdcebd3
--- /dev/null
+++ b/include/configs/mv-common.h
@@ -0,0 +1,230 @@
+/*
+ * (C) Copyright 2010
+ * Marvell Semiconductor <www.marvell.com>
+ * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+
+/*
+ * This file contains Marvell Board Specific common defincations.
+ * This file should be included in board config header file.
+ *
+ * It supports common definations for Kirkwood platform
+ * TBD: support for Orion5X platforms
+ */
+
+#ifndef _MV_COMMON_H
+#define _MV_COMMON_H
+
+/*
+ * High Level Configuration Options (easy to change)
+ */
+#define CONFIG_MARVELL		1
+#define CONFIG_ARM926EJS	1	/* Basic Architecture */
+
+#if defined(CONFIG_KIRKWOOD)
+#define CONFIG_MD5	/* get_random_hex on krikwood needs MD5 support */
+#define CONFIG_KIRKWOOD_EGIGA_INIT	/* Enable GbePort0/1 for kernel */
+#define CONFIG_KIRKWOOD_RGMII_PAD_1V8	/* Set RGMII Pad voltage to 1.8V */
+#define CONFIG_KIRKWOOD_PCIE_INIT       /* Enable PCIE Port0 for kernel */
+
+#define CONFIG_I2C_MVTWSI_BASE	KW_TWSI_BASE
+#define MV_UART0_BASE		KW_UART0_BASE
+#define MV_SATA_BASE		KW_SATA_BASE
+#define MV_SATA_PORT0_OFFSET	KW_SATA_PORT0_OFFSET
+#define MV_SATA_PORT1_OFFSET	KW_SATA_PORT1_OFFSET
+
+#else
+#error "Unsupported SoC"
+#endif
+
+/* additions for new ARM relocation support */
+#define CONFIG_SYS_SDRAM_BASE		0x00000000
+/* Kirkwood has 2k of Security SRAM, use it for SP */
+#define CONFIG_SYS_INIT_SP_ADDR		0xC8012000
+
+/*
+ * CLKs configurations
+ */
+#define CONFIG_SYS_HZ		1000
+
+/*
+ * NS16550 Configuration
+ */
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_REG_SIZE	(-4)
+#define CONFIG_SYS_NS16550_CLK		CONFIG_SYS_TCLK
+#define CONFIG_SYS_NS16550_COM1		MV_UART0_BASE
+
+/*
+ * Serial Port configuration
+ * The following definitions let you select what serial you want to use
+ * for your console driver.
+ */
+
+#define CONFIG_CONS_INDEX	1	/*Console on UART0 */
+#define CONFIG_BAUDRATE			115200
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, \
+					  115200,230400, 460800, 921600 }
+/* auto boot */
+#define CONFIG_BOOTDELAY	3	/* default enable autoboot */
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CONFIG_CMDLINE_TAG	1	/* enable passing of ATAGs  */
+#define CONFIG_INITRD_TAG	1	/* enable INITRD tag */
+#define CONFIG_SETUP_MEMORY_TAGS 1	/* enable memory tag */
+
+#define	CONFIG_SYS_PROMPT	"Marvell>> "	/* Command Prompt */
+#define	CONFIG_SYS_CBSIZE	1024	/* Console I/O Buff Size */
+#define	CONFIG_SYS_PBSIZE	(CONFIG_SYS_CBSIZE \
+		+sizeof(CONFIG_SYS_PROMPT) + 16)	/* Print Buff */
+
+/*
+ * NAND configuration
+ */
+#ifdef CONFIG_CMD_NAND
+#define CONFIG_NAND_KIRKWOOD
+#define CONFIG_SYS_MAX_NAND_DEVICE	1
+#define NAND_MAX_CHIPS			1
+#define CONFIG_SYS_NAND_BASE		0xD8000000	/* MV_DEFADR_NANDF */
+#define NAND_ALLOW_ERASE_ALL		1
+#define CONFIG_SYS_64BIT_VSPRINTF	/* needed for nand_util.c */
+#endif
+
+/*
+ * SPI Flash configuration
+ */
+#ifdef CONFIG_CMD_SF
+#define CONFIG_SPI_FLASH		1
+#define CONFIG_HARD_SPI			1
+#define CONFIG_KIRKWOOD_SPI		1
+#define CONFIG_SPI_FLASH_MACRONIX	1
+#define CONFIG_ENV_SPI_BUS		0
+#define CONFIG_ENV_SPI_CS		0
+#define CONFIG_ENV_SPI_MAX_HZ		50000000	/*50Mhz */
+#endif
+
+/*
+ * Size of malloc() pool
+ */
+#define CONFIG_SYS_MALLOC_LEN	(1024 * 1024) /* 1MiB for malloc() */
+/* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_SIZE	128
+
+/*
+ * Other required minimal configurations
+ */
+#define CONFIG_SYS_LONGHELP
+#define CONFIG_AUTO_COMPLETE
+#define CONFIG_CMDLINE_EDITING
+#define CONFIG_CONSOLE_INFO_QUIET	/* some code reduction */
+#define CONFIG_ARCH_CPU_INIT	/* call arch_cpu_init() */
+#define CONFIG_ARCH_MISC_INIT	/* call arch_misc_init() */
+#define CONFIG_DISPLAY_CPUINFO	/* Display cpu info */
+#define CONFIG_NR_DRAM_BANKS	4
+#define CONFIG_STACKSIZE	0x00100000	/* regular stack- 1M */
+#define CONFIG_SYS_LOAD_ADDR	0x00800000	/* default load adr- 8M */
+#define CONFIG_SYS_MEMTEST_START 0x00400000	/* 4M */
+#define CONFIG_SYS_MEMTEST_END	0x007fffff	/*(_8M -1) */
+#define CONFIG_SYS_RESET_ADDRESS 0xffff0000	/* Rst Vector Adr */
+#define CONFIG_SYS_MAXARGS	16	/* max number of command args */
+
+/*
+ * Ethernet Driver configuration
+ */
+#ifdef CONFIG_CMD_NET
+#define CONFIG_CMD_MII
+#define CONFIG_NETCONSOLE	/* include NetConsole support   */
+#define CONFIG_NET_MULTI	/* specify more that one ports available */
+#define	CONFIG_MII		/* expose smi ove miiphy interface */
+#define CONFIG_MVGBE		/* Enable Marvell Gbe Controller Driver */
+#define CONFIG_SYS_FAULT_ECHO_LINK_DOWN	/* detect link using phy */
+#define CONFIG_ENV_OVERWRITE	/* ethaddr can be reprogrammed */
+#define CONFIG_RESET_PHY_R	/* use reset_phy() to init mv8831116 PHY */
+#endif /* CONFIG_CMD_NET */
+
+/*
+ * USB/EHCI
+ */
+#ifdef CONFIG_CMD_USB
+#define CONFIG_USB_EHCI		/* Enable EHCI USB support */
+#define CONFIG_USB_EHCI_KIRKWOOD
+#define CONFIG_EHCI_IS_TDI
+#define CONFIG_USB_STORAGE
+#define CONFIG_DOS_PARTITION
+#define CONFIG_ISO_PARTITION
+#define CONFIG_SUPPORT_VFAT
+#endif /* CONFIG_CMD_USB */
+
+/*
+ * IDE Support on SATA ports
+ */
+#ifdef CONFIG_CMD_IDE
+#define __io
+#define CONFIG_CMD_EXT2
+#define CONFIG_MVSATA_IDE
+#define CONFIG_IDE_PREINIT
+#define CONFIG_MVSATA_IDE_USE_PORT1
+/* Needs byte-swapping for ATA data register */
+#define CONFIG_IDE_SWAP_IO
+/* Data, registers and alternate blocks are at the same offset */
+#define CONFIG_SYS_ATA_DATA_OFFSET	(0x0100)
+#define CONFIG_SYS_ATA_REG_OFFSET	(0x0100)
+#define CONFIG_SYS_ATA_ALT_OFFSET	(0x0100)
+/* Each 8-bit ATA register is aligned to a 4-bytes address */
+#define CONFIG_SYS_ATA_STRIDE		4
+/* Controller supports 48-bits LBA addressing */
+#define CONFIG_LBA48
+/* CONFIG_CMD_IDE requires some #defines for ATA registers */
+#define CONFIG_SYS_IDE_MAXBUS		2
+#define CONFIG_SYS_IDE_MAXDEVICE	2
+/* ATA registers base is at SATA controller base */
+#define CONFIG_SYS_ATA_BASE_ADDR	MV_SATA_BASE
+#endif /* CONFIG_CMD_IDE */
+
+/*
+ * I2C related stuff
+ */
+#ifdef CONFIG_CMD_I2C
+#define CONFIG_I2C_MVTWSI
+#define CONFIG_SYS_I2C_SLAVE		0x0
+#define CONFIG_SYS_I2C_SPEED		100000
+#endif
+
+/*
+ * File system
+ */
+#define CONFIG_CMD_EXT2
+#define CONFIG_CMD_JFFS2
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_UBI
+#define CONFIG_CMD_UBIFS
+#define CONFIG_RBTREE
+#define CONFIG_MTD_DEVICE               /* needed for mtdparts commands */
+#define CONFIG_MTD_PARTITIONS
+#define CONFIG_CMD_MTDPARTS
+#define CONFIG_LZO
+
+#endif /* _MV_COMMON_H */
diff --git a/include/configs/mv88f6281gtw_ge.h b/include/configs/mv88f6281gtw_ge.h
index 9ef03a6..d323829 100644
--- a/include/configs/mv88f6281gtw_ge.h
+++ b/include/configs/mv88f6281gtw_ge.h
@@ -33,66 +33,19 @@
 /*
  * High Level Configuration Options (easy to change)
  */
-#define CONFIG_MARVELL		1
-#define CONFIG_ARM926EJS	1	/* Basic Architecture */
 #define CONFIG_FEROCEON_88FR131	1	/* CPU Core subversion */
 #define CONFIG_KIRKWOOD		1	/* SOC Family Name */
 #define CONFIG_KW88F6281	1	/* SOC Name */
 #define CONFIG_MACH_MV88F6281GTW_GE	/* Machine type */
-
-#define CONFIG_MD5	/* get_random_hex on krikwood needs MD5 support */
 #define CONFIG_SKIP_LOWLEVEL_INIT	/* disable board lowlevel_init */
-#define CONFIG_KIRKWOOD_EGIGA_INIT	/* Enable GbePort0/1 for kernel */
-#define CONFIG_KIRKWOOD_PCIE_INIT	/* Enable PCIE Port0 for kernel */
-#define CONFIG_KIRKWOOD_RGMII_PAD_1V8	/* Set RGMII Pad voltage to 1.8V */
 
 /*
- * CLKs configurations
- */
-#define CONFIG_SYS_HZ		1000
-
-/*
- * NS16550 Configuration
- */
-#define CONFIG_SYS_NS16550
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_REG_SIZE	(-4)
-#define CONFIG_SYS_NS16550_CLK		CONFIG_SYS_TCLK
-#define CONFIG_SYS_NS16550_COM1		KW_UART0_BASE
-
-/*
- * Serial Port configuration
- * The following definitions let you select what serial you want to use
- * for your console driver.
- */
-
-#define CONFIG_CONS_INDEX	1	/*Console on UART0 */
-#define CONFIG_BAUDRATE			115200
-#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, \
-					  115200,230400, 460800, 921600 }
-/* auto boot */
-#define CONFIG_BOOTDELAY	3	/* default enable autoboot */
-
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- */
-#define CONFIG_CMDLINE_TAG	1	/* enable passing of ATAGs  */
-#define CONFIG_INITRD_TAG	1	/* enable INITRD tag */
-#define CONFIG_SETUP_MEMORY_TAGS 1	/* enable memory tag */
-
-#define	CONFIG_SYS_PROMPT	"Marvell>> "	/* Command Prompt */
-#define	CONFIG_SYS_CBSIZE	1024	/* Console I/O Buff Size */
-#define	CONFIG_SYS_PBSIZE	(CONFIG_SYS_CBSIZE \
-		+sizeof(CONFIG_SYS_PROMPT) + 16)	/* Print Buff */
-/*
  * Commands configuration
  */
 #define CONFIG_SYS_NO_FLASH		/* Declare no flash (NOR/SPI) */
 #include <config_cmd_default.h>
-#define CONFIG_CMD_AUTOSCRIPT
 #define CONFIG_CMD_DHCP
+#define CONFIG_CMD_PING
 #define CONFIG_CMD_ENV
 #define CONFIG_CMD_FAT
 #define CONFIG_CMD_PING
@@ -100,17 +53,18 @@
 #define CONFIG_CMD_USB
 
 /*
- * Flash configuration
+ * mv-common.h should be defined after CMD configs since it used them
+ * to enable certain macros
  */
-#ifdef CONFIG_CMD_SF
-#define CONFIG_SPI_FLASH		1
-#define CONFIG_HARD_SPI			1
-#define CONFIG_KIRKWOOD_SPI		1
-#define CONFIG_SPI_FLASH_MACRONIX	1
-#define CONFIG_ENV_SPI_BUS		0
-#define CONFIG_ENV_SPI_CS		0
-#define CONFIG_ENV_SPI_MAX_HZ		50000000	/*50Mhz */
-#endif
+#include "mv-common.h"
+
+/* Unwanted stuffs from mv-common.h */
+#undef	CONFIG_CMD_EXT2
+#undef	CONFIG_CMD_JFFS2
+#undef	CONFIG_CMD_FAT
+#undef	CONFIG_CMD_UBI
+#undef	CONFIG_CMD_UBIFS
+#undef	CONFIG_RBTREE
 
 /*
  *  Environment variables configurations
@@ -142,59 +96,11 @@
 	"x_bootargs_root=root=/dev/mtdblock3 ro rootfstype=squashfs\0"
 
 /*
- * Size of malloc() pool
- */
-#define CONFIG_SYS_MALLOC_LEN	(1024 * 128) /* 128kB for malloc() */
-/* size in bytes reserved for initial data */
-#define CONFIG_SYS_GBL_DATA_SIZE	128
-
-/*
- * Other required minimal configurations
- */
-#define CONFIG_CONSOLE_INFO_QUIET	/* some code reduction */
-#define CONFIG_ARCH_CPU_INIT	/* call arch_cpu_init() */
-#define CONFIG_ARCH_MISC_INIT	/* call arch_misc_init() */
-#define CONFIG_DISPLAY_CPUINFO	/* Display cpu info */
-#define CONFIG_NR_DRAM_BANKS	4
-#define CONFIG_STACKSIZE	0x00100000	/* regular stack- 1M */
-#define CONFIG_SYS_LOAD_ADDR	0x00800000	/* default load adr- 8M */
-#define CONFIG_SYS_MEMTEST_START 0x00400000	/* 4M */
-#define CONFIG_SYS_MEMTEST_END	0x007fffff	/*(_8M -1) */
-#define CONFIG_SYS_RESET_ADDRESS 0xffff0000	/* Rst Vector Adr */
-#define CONFIG_SYS_MAXARGS	16	/* max number of command args */
-
-/*
  * Ethernet Driver configuration
  */
 #ifdef CONFIG_CMD_NET
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_PING
-#define CONFIG_NETCONSOLE	/* include NetConsole support   */
-#define CONFIG_NET_MULTI	/* specify more that one ports available */
-#define	CONFIG_MII		/* expose smi ove miiphy interface */
-#define CONFIG_MVGBE		/* Enable Marvell Gbe Controller Driver */
-#define CONFIG_SYS_FAULT_ECHO_LINK_DOWN	/* detect link using phy */
 #define CONFIG_MVGBE_PORTS	{1, 0}	/* enable port 0 only */
-#define CONFIG_ENV_OVERWRITE	/* ethaddr can be reprogrammed */
-#endif /* CONFIG_CMD_NET */
-
-/*
- * Marvell 88Exxxx Switch configurations
- */
-#define CONFIG_RESET_PHY_R	/* use reset_phy() to init phy/swtich */
 #define CONFIG_MV88E61XX_SWITCH	/* Enable mv88e61xx switch driver */
-
-/*
- * USB/EHCI
- */
-#ifdef CONFIG_CMD_USB
-#define CONFIG_USB_EHCI			/* Enable EHCI USB support */
-#define CONFIG_USB_EHCI_KIRKWOOD	/* on Kirkwood platform	*/
-#define CONFIG_EHCI_IS_TDI
-#define CONFIG_USB_STORAGE
-#define CONFIG_DOS_PARTITION
-#define CONFIG_ISO_PARTITION
-#define CONFIG_SUPPORT_VFAT
-#endif /* CONFIG_CMD_USB */
+#endif /* CONFIG_CMD_NET */
 
 #endif /* _CONFIG_MV88F6281GTW_GE_H */
diff --git a/include/configs/mx31ads.h b/include/configs/mx31ads.h
index dedecd7..57955df 100644
--- a/include/configs/mx31ads.h
+++ b/include/configs/mx31ads.h
@@ -63,13 +63,13 @@
 #define CONFIG_HARD_SPI		1
 #define CONFIG_MXC_SPI		1
 #define CONFIG_DEFAULT_SPI_BUS	1
-#define CONFIG_DEFAULT_SPI_MODE	(SPI_MODE_2 | SPI_CS_HIGH)
+#define CONFIG_DEFAULT_SPI_MODE	(SPI_MODE_0 | SPI_CS_HIGH)
 
 #define CONFIG_FSL_PMIC
 #define CONFIG_FSL_PMIC_BUS	1
 #define CONFIG_FSL_PMIC_CS	0
 #define CONFIG_FSL_PMIC_CLK	1000000
-#define CONFIG_FSL_PMIC_MODE	(SPI_MODE_2 | SPI_CS_HIGH)
+#define CONFIG_FSL_PMIC_MODE	(SPI_MODE_0 | SPI_CS_HIGH)
 #define CONFIG_RTC_MC13783	1
 
 /* allow to overwrite serial and ethaddr */
diff --git a/include/configs/mx31pdk.h b/include/configs/mx31pdk.h
index 0414cc3..4b4fb1a 100644
--- a/include/configs/mx31pdk.h
+++ b/include/configs/mx31pdk.h
@@ -67,13 +67,13 @@
 #define CONFIG_HARD_SPI		1
 #define CONFIG_MXC_SPI		1
 #define CONFIG_DEFAULT_SPI_BUS	1
-#define CONFIG_DEFAULT_SPI_MODE	(SPI_MODE_2 | SPI_CS_HIGH)
+#define CONFIG_DEFAULT_SPI_MODE	(SPI_MODE_0 | SPI_CS_HIGH)
 
 #define CONFIG_FSL_PMIC
 #define CONFIG_FSL_PMIC_BUS	1
 #define CONFIG_FSL_PMIC_CS	2
 #define CONFIG_FSL_PMIC_CLK	1000000
-#define CONFIG_FSL_PMIC_MODE	(SPI_MODE_2 | SPI_CS_HIGH)
+#define CONFIG_FSL_PMIC_MODE	(SPI_MODE_0 | SPI_CS_HIGH)
 #define CONFIG_RTC_MC13783	1
 
 /* allow to overwrite serial and ethaddr */
diff --git a/include/configs/mx51evk.h b/include/configs/mx51evk.h
index 86a4731..8864f3a 100644
--- a/include/configs/mx51evk.h
+++ b/include/configs/mx51evk.h
@@ -73,7 +73,7 @@
 #define CONFIG_FSL_PMIC_BUS	0
 #define CONFIG_FSL_PMIC_CS	0
 #define CONFIG_FSL_PMIC_CLK	2500000
-#define CONFIG_FSL_PMIC_MODE	(SPI_CPOL | SPI_CS_HIGH)
+#define CONFIG_FSL_PMIC_MODE	(SPI_MODE_0 | SPI_CS_HIGH)
 
 /*
  * MMC Configs
diff --git a/include/configs/omap1510.h b/include/configs/omap1510.h
index 931560c..e6d9c7a 100644
--- a/include/configs/omap1510.h
+++ b/include/configs/omap1510.h
@@ -28,7 +28,7 @@
  *  675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
-#include <asm/arch/sizes.h>
+#include <asm/sizes.h>
 
 /*
   There are 2 sets of general I/O -->
diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h
index 2463be4..1bd0f37 100644
--- a/include/configs/omap3_beagle.h
+++ b/include/configs/omap3_beagle.h
@@ -340,8 +340,7 @@ extern unsigned int boot_flash_sec;
 extern unsigned int boot_flash_type;
 #endif
 
-/* additions for new relocation code, must added to all boards */
-#undef CONFIG_SYS_ARM_WITHOUT_RELOC /* This board is tested with relocation support */
+/* additions for new relocation code, must be added to all boards */
 #define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM_1
 #define CONFIG_SYS_INIT_SP_ADDR		(LOW_LEVEL_SRAM_STACK - CONFIG_SYS_GBL_DATA_SIZE)
 
diff --git a/include/configs/omap730.h b/include/configs/omap730.h
index 04d5144..c7682a1 100644
--- a/include/configs/omap730.h
+++ b/include/configs/omap730.h
@@ -31,7 +31,7 @@
 #ifndef __INCLUDED_OMAP730_H
 #define __INCLUDED_OMAP730_H
 
-#include <asm/arch/sizes.h>
+#include <asm/sizes.h>
 
 /***************************************************************************
  * OMAP730 Configuration Registers
diff --git a/include/configs/openrd_base.h b/include/configs/openrd_base.h
index 846dfcd..cfdd09c 100644
--- a/include/configs/openrd_base.h
+++ b/include/configs/openrd_base.h
@@ -38,59 +38,12 @@
 /*
  * High Level Configuration Options (easy to change)
  */
-#define CONFIG_MARVELL		1
-#define CONFIG_ARM926EJS	1	/* Basic Architecture */
 #define CONFIG_SHEEVA_88SV131	1	/* CPU Core subversion */
 #define CONFIG_KIRKWOOD		1	/* SOC Family Name */
 #define CONFIG_KW88F6281	1	/* SOC Name */
 #define CONFIG_MACH_OPENRD_BASE	/* Machine type */
-
-#define CONFIG_MD5	/* get_random_hex on krikwood needs MD5 support */
 #define CONFIG_SKIP_LOWLEVEL_INIT	/* disable board lowlevel_init */
-#define CONFIG_KIRKWOOD_EGIGA_INIT	/* Enable GbePort0/1 for kernel */
-#define CONFIG_KIRKWOOD_RGMII_PAD_1V8	/* Set RGMII Pad voltage to 1.8V */
-#define CONFIG_KIRKWOOD_PCIE_INIT       /* Enable PCIE Port0 for kernel */
-
-/*
- * CLKs configurations
- */
-#define CONFIG_SYS_HZ		1000
-
-/*
- * NS16550 Configuration
- */
-#define CONFIG_SYS_NS16550
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_REG_SIZE	(-4)
-#define CONFIG_SYS_NS16550_CLK		CONFIG_SYS_TCLK
-#define CONFIG_SYS_NS16550_COM1		KW_UART0_BASE
-
-/*
- * Serial Port configuration
- * The following definitions let you select what serial you want to use
- * for your console driver.
- */
-
-#define CONFIG_CONS_INDEX	1	/*Console on UART0 */
-#define CONFIG_BAUDRATE			115200
-#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, \
-					  115200,230400, 460800, 921600 }
-/* auto boot */
-#define CONFIG_BOOTDELAY	3	/* default enable autoboot */
-
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- */
-#define CONFIG_CMDLINE_TAG	1	/* enable passing of ATAGs  */
-#define CONFIG_INITRD_TAG	1	/* enable INITRD tag */
-#define CONFIG_SETUP_MEMORY_TAGS 1	/* enable memory tag */
 
-#define	CONFIG_SYS_PROMPT	"Marvell>> "	/* Command Prompt */
-#define	CONFIG_SYS_CBSIZE	1024	/* Console I/O Buff Size */
-#define	CONFIG_SYS_PBSIZE	(CONFIG_SYS_CBSIZE \
-		+sizeof(CONFIG_SYS_PROMPT) + 16)	/* Print Buff */
 /*
  * Commands configuration
  */
@@ -106,15 +59,10 @@
 #define CONFIG_CMD_IDE
 
 /*
- * NAND configuration
+ * mv-common.h should be defined after CMD configs since it used them
+ * to enable certain macros
  */
-#ifdef CONFIG_CMD_NAND
-#define CONFIG_NAND_KIRKWOOD
-#define CONFIG_SYS_MAX_NAND_DEVICE	1
-#define NAND_MAX_CHIPS			1
-#define CONFIG_SYS_NAND_BASE		0xD8000000	/* KW_DEFADR_NANDF */
-#define NAND_ALLOW_ERASE_ALL		1
-#endif
+#include "mv-common.h"
 
 /*
  *  Environment variables configurations
@@ -154,97 +102,19 @@
 	"mtdparts="MTDPARTS_DEFAULT"\0"
 
 /*
- * Size of malloc() pool
- */
-#define CONFIG_SYS_MALLOC_LEN	(1024 * 1024) /* 1MiB for malloc() */
-/* size in bytes reserved for initial data */
-#define CONFIG_SYS_GBL_DATA_SIZE	128
-
-/*
- * Other required minimal configurations
- */
-#define CONFIG_SYS_LONGHELP
-#define CONFIG_AUTO_COMPLETE
-#define CONFIG_CMDLINE_EDITING
-#define CONFIG_ARCH_CPU_INIT	/* call arch_cpu_init() */
-#define CONFIG_ARCH_MISC_INIT	/* call arch_misc_init() */
-#define CONFIG_DISPLAY_CPUINFO	/* Display cpu info */
-#define CONFIG_NR_DRAM_BANKS	4
-#define CONFIG_STACKSIZE	0x00100000	/* regular stack- 1M */
-#define CONFIG_SYS_LOAD_ADDR	0x00800000	/* default load adr- 8M */
-#define CONFIG_SYS_MEMTEST_START 0x00400000	/* 4M */
-#define CONFIG_SYS_MEMTEST_END	0x007fffff	/*(_8M -1) */
-#define CONFIG_SYS_RESET_ADDRESS 0xffff0000	/* Rst Vector Adr */
-#define CONFIG_SYS_MAXARGS	16	/* max number of command args */
-
-/*
  * Ethernet Driver configuration
  */
 #ifdef CONFIG_CMD_NET
-#define CONFIG_NETCONSOLE	/* include NetConsole support   */
-#define CONFIG_NET_MULTI	/* specify more that one ports available */
-#define	CONFIG_MII		/* expose smi ove miiphy interface */
-#define CONFIG_MVGBE		/* Enable Marvell Gbe Controller Driver */
-#define CONFIG_SYS_FAULT_ECHO_LINK_DOWN	/* detect link using phy */
 #define CONFIG_MVGBE_PORTS	{1, 0}	/* enable port 0 only */
 #define CONFIG_PHY_BASE_ADR	0x8
-#define CONFIG_ENV_OVERWRITE	/* ethaddr can be reprogrammed */
-#define CONFIG_RESET_PHY_R	/* use reset_phy() to init mv8831116 PHY */
 #endif /* CONFIG_CMD_NET */
 
 /*
- * USB/EHCI
- */
-#ifdef CONFIG_CMD_USB
-#define CONFIG_USB_EHCI			/* Enable EHCI USB support */
-#define CONFIG_USB_EHCI_KIRKWOOD	/* on Kirkwood platform	*/
-#define CONFIG_EHCI_IS_TDI
-#define CONFIG_USB_STORAGE
-#define CONFIG_DOS_PARTITION
-#define CONFIG_ISO_PARTITION
-#define CONFIG_SUPPORT_VFAT
-#endif /* CONFIG_CMD_USB */
-
-/*
- * IDe Support on SATA port0
- */
-#ifdef CONFIG_CMD_IDE
-#define __io
-#define CONFIG_CMD_EXT2
-#define CONFIG_MVSATA_IDE
-#define CONFIG_IDE_PREINIT
-#define CONFIG_MVSATA_IDE_USE_PORT1
-/* Needs byte-swapping for ATA data register */
-#define CONFIG_IDE_SWAP_IO
-/* Data, registers and alternate blocks are at the same offset */
-#define CONFIG_SYS_ATA_DATA_OFFSET	(0x0100)
-#define CONFIG_SYS_ATA_REG_OFFSET	(0x0100)
-#define CONFIG_SYS_ATA_ALT_OFFSET	(0x0100)
-/* Each 8-bit ATA register is aligned to a 4-bytes address */
-#define CONFIG_SYS_ATA_STRIDE		4
-/* Controller supports 48-bits LBA addressing */
-#define CONFIG_LBA48
-/* CONFIG_CMD_IDE requires some #defines for ATA registers */
-#define CONFIG_SYS_IDE_MAXBUS		2
-#define CONFIG_SYS_IDE_MAXDEVICE	2
-/* ATA registers base is at SATA controller base */
-#define CONFIG_SYS_ATA_BASE_ADDR	KW_SATA_BASE
-/* ATA bus 0 is Kirkwood port 0 on openrd */
-#define CONFIG_SYS_ATA_IDE0_OFFSET	KW_SATA_PORT0_OFFSET
-/* ATA bus 1 is Kirkwood port 1 on openrd */
-#define CONFIG_SYS_ATA_IDE1_OFFSET	KW_SATA_PORT1_OFFSET
-#endif /* CONFIG_CMD_IDE */
-
-/*
- * File system
+ * SATA Driver configuration
  */
-#define CONFIG_CMD_FAT
-#define CONFIG_CMD_UBI
-#define CONFIG_CMD_UBIFS
-#define CONFIG_RBTREE
-#define CONFIG_MTD_DEVICE               /* needed for mtdparts commands */
-#define CONFIG_MTD_PARTITIONS
-#define CONFIG_CMD_MTDPARTS
-#define CONFIG_LZO
+#ifdef CONFIG_MVSATA_IDE
+#define CONFIG_SYS_ATA_IDE0_OFFSET	MV_SATA_PORT0_OFFSET
+#define CONFIG_SYS_ATA_IDE1_OFFSET	MV_SATA_PORT1_OFFSET
+#endif /*CONFIG_MVSATA_IDE*/
 
 #endif /* _CONFIG_OPENRD_BASE_H */
diff --git a/include/configs/qong.h b/include/configs/qong.h
index 7a68b7b..7f284ef 100644
--- a/include/configs/qong.h
+++ b/include/configs/qong.h
@@ -52,18 +52,18 @@
 #define CONFIG_MXC_UART	1
 #define CONFIG_SYS_MX31_UART1	1
 
-#define CONFIG_MX31_GPIO
+#define CONFIG_MXC_GPIO
 
 #define CONFIG_MXC_SPI
 #define CONFIG_DEFAULT_SPI_BUS	1
-#define CONFIG_DEFAULT_SPI_MODE	(SPI_MODE_2 | SPI_CS_HIGH)
+#define CONFIG_DEFAULT_SPI_MODE	(SPI_MODE_0 | SPI_CS_HIGH)
 #define CONFIG_RTC_MC13783
 
 #define CONFIG_FSL_PMIC
 #define CONFIG_FSL_PMIC_BUS	1
 #define CONFIG_FSL_PMIC_CS	0
 #define CONFIG_FSL_PMIC_CLK	100000
-#define CONFIG_FSL_PMIC_MODE	(SPI_MODE_2 | SPI_CS_HIGH)
+#define CONFIG_FSL_PMIC_MODE	(SPI_MODE_0 | SPI_CS_HIGH)
 
 /* FPGA */
 #define CONFIG_QONG_FPGA	1
@@ -282,8 +282,7 @@ extern int qong_nand_rdy(void *chip);
 	"mtdparts=physmap-flash.0:384k(U-Boot),128k(env1),"	\
 	"128k(env2),2432k(kernel),13m(ramdisk),-(user)"
 
-/* additions for new relocation code, must added to all boards */
-#undef CONFIG_SYS_ARM_WITHOUT_RELOC /* This board is tested with relocation support */
+/* additions for new relocation code, must be added to all boards */
 #define CONFIG_SYS_SDRAM_BASE		0x80000000
 #define CONFIG_SYS_INIT_RAM_ADDR	IRAM_BASE_ADDR
 #define CONFIG_SYS_INIT_RAM_END		IRAM_SIZE
diff --git a/include/configs/rd6281a.h b/include/configs/rd6281a.h
index 5857301..60f9579 100644
--- a/include/configs/rd6281a.h
+++ b/include/configs/rd6281a.h
@@ -33,59 +33,13 @@
 /*
  * High Level Configuration Options (easy to change)
  */
-#define CONFIG_MARVELL		1
-#define CONFIG_ARM926EJS	1	/* Basic Architecture */
 #define CONFIG_FEROCEON_88FR131	1	/* CPU Core subversion */
 #define CONFIG_KIRKWOOD		1	/* SOC Family Name */
 #define CONFIG_KW88F6281	1	/* SOC Name */
 #define CONFIG_MACH_RD6281A		/* Machine type */
-
-#define CONFIG_MD5	/* get_random_hex on krikwood needs MD5 support */
 #define CONFIG_SKIP_LOWLEVEL_INIT	/* disable board lowlevel_init */
-#define CONFIG_KIRKWOOD_EGIGA_INIT	/* Enable GbePort0/1 for kernel */
-#define CONFIG_KIRKWOOD_RGMII_PAD_1V8	/* Set RGMII Pad voltage to 1.8V */
-
-/*
- * CLKs configurations
- */
-#define CONFIG_SYS_HZ		1000
-
-/*
- * NS16550 Configuration
- */
-#define CONFIG_SYS_NS16550
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_REG_SIZE	(-4)
-#define CONFIG_SYS_NS16550_CLK		CONFIG_SYS_TCLK
-#define CONFIG_SYS_NS16550_COM1		KW_UART0_BASE
-
-/*
- * Serial Port configuration
- * The following definitions let you select what serial you want to use
- * for your console driver.
- */
-
-#define CONFIG_CONS_INDEX	1	/*Console on UART0 */
-#define CONFIG_BAUDRATE			115200
-#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, \
-					  115200,230400, 460800, 921600 }
-/* auto boot */
-#define CONFIG_BOOTDELAY	3	/* default enable autoboot */
 
 /*
- * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- */
-#define CONFIG_CMDLINE_TAG	1	/* enable passing of ATAGs */
-#define CONFIG_INITRD_TAG	1	/* enable INITRD tag */
-#define CONFIG_SETUP_MEMORY_TAGS 1	/* enable memory tag */
-
-#define	CONFIG_SYS_PROMPT	"Marvell>> "	/* Command Prompt */
-#define	CONFIG_SYS_CBSIZE	1024	/* Console I/O Buff Size */
-#define	CONFIG_SYS_PBSIZE	(CONFIG_SYS_CBSIZE \
-		+sizeof(CONFIG_SYS_PROMPT) + 16)	/* Print Buff */
-/*
  * Commands configuration
  */
 #define CONFIG_SYS_NO_FLASH		/* Declare no flash (NOR/SPI) */
@@ -97,17 +51,13 @@
 #define CONFIG_CMD_NAND
 #define CONFIG_CMD_PING
 #define CONFIG_CMD_USB
+#define CONFIG_CMD_IDE
 
 /*
- * NAND configuration
+ * mv-common.h should be defined after CMD configs since it used them
+ * to enable certain macros
  */
-#ifdef CONFIG_CMD_NAND
-#define CONFIG_NAND_KIRKWOOD
-#define CONFIG_SYS_MAX_NAND_DEVICE	1
-#define NAND_MAX_CHIPS			1
-#define CONFIG_SYS_NAND_BASE		0xD8000000	/* KW_DEFADR_NANDF */
-#define NAND_ALLOW_ERASE_ALL		1
-#endif
+#include "mv-common.h"
 
 /*
  * Environment variables configurations
@@ -143,56 +93,23 @@
 	"x_bootargs_root=root=/dev/mtdblock3 rw rootfstype=jffs2\0"
 
 /*
- * Size of malloc() pool
- */
-#define CONFIG_SYS_MALLOC_LEN	(1024 * 128) /* 128kB for malloc() */
-/* size in bytes reserved for initial data */
-#define CONFIG_SYS_GBL_DATA_SIZE	128
-
-/*
- * Other required minimal configurations
- */
-#define CONFIG_CONSOLE_INFO_QUIET	/* some code reduction */
-#define CONFIG_ARCH_CPU_INIT	/* call arch_cpu_init() */
-#define CONFIG_ARCH_MISC_INIT	/* call arch_misc_init() */
-#define CONFIG_DISPLAY_CPUINFO	/* Display cpu info */
-#define CONFIG_NR_DRAM_BANKS	4
-#define CONFIG_STACKSIZE	0x00100000	/* regular stack- 1M */
-#define CONFIG_SYS_LOAD_ADDR	0x00800000	/* default load adr- 8M */
-#define CONFIG_SYS_MEMTEST_START 0x00400000	/* 4M */
-#define CONFIG_SYS_MEMTEST_END	0x007fffff	/*(_8M -1) */
-#define CONFIG_SYS_RESET_ADDRESS 0xffff0000	/* Rst Vector Adr */
-#define CONFIG_SYS_MAXARGS	16	/* max number of command args */
-
-/*
  * Ethernet Driver configuration
  */
 #ifdef CONFIG_CMD_NET
-#define CONFIG_NETCONSOLE	/* include NetConsole support */
-#define CONFIG_NET_MULTI	/* specify more that one ports available */
-#define CONFIG_MII		/* expose smi ove miiphy interface */
-#define CONFIG_MVGBE		/* Enable Marvell Gbe Controller Driver */
 #define CONFIG_MVGBE_PORTS	{1, 1}	/* enable both ports */
 #define CONFIG_MV88E61XX_MULTICHIP_ADRMODE
 #define CONFIG_DIS_AUTO_NEG_SPEED_GMII /*Disable Auto speed negociation */
 #define CONFIG_PHY_SPEED	_1000BASET	/*Force PHYspeed to 1GBPs */
 #define CONFIG_PHY_BASE_ADR	0x0A
-#define CONFIG_ENV_OVERWRITE	/* ethaddr can be reprogrammed */
-#define CONFIG_RESET_PHY_R	/* use reset_phy() to init switch and PHY */
 #define CONFIG_MV88E61XX_SWITCH	/* Enable MV88E61XX switch driver */
 #endif /* CONFIG_CMD_NET */
 
 /*
- * USB/EHCI
+ * SATA Driver configuration
  */
-#ifdef CONFIG_CMD_USB
-#define CONFIG_USB_EHCI			/* Enable EHCI USB support */
-#define CONFIG_USB_EHCI_KIRKWOOD	/* on Kirkwood platform	*/
-#define CONFIG_EHCI_IS_TDI
-#define CONFIG_USB_STORAGE
-#define CONFIG_DOS_PARTITION
-#define CONFIG_ISO_PARTITION
-#define CONFIG_SUPPORT_VFAT
-#endif /* CONFIG_CMD_USB */
+#ifdef CONFIG_MVSATA_IDE
+#define CONFIG_SYS_ATA_IDE0_OFFSET	MV_SATA_PORT0_OFFSET
+#define CONFIG_SYS_ATA_IDE1_OFFSET	MV_SATA_PORT1_OFFSET
+#endif /*CONFIG_MVSATA_IDE*/
 
 #endif /* _CONFIG_RD6281A_H */
diff --git a/include/configs/sheevaplug.h b/include/configs/sheevaplug.h
index c5de86e..83dd8ff 100644
--- a/include/configs/sheevaplug.h
+++ b/include/configs/sheevaplug.h
@@ -33,82 +33,28 @@
 /*
  * High Level Configuration Options (easy to change)
  */
-#define CONFIG_MARVELL		1
-#define CONFIG_ARM926EJS	1	/* Basic Architecture */
 #define CONFIG_FEROCEON_88FR131	1	/* CPU Core subversion */
 #define CONFIG_KIRKWOOD		1	/* SOC Family Name */
 #define CONFIG_KW88F6281	1	/* SOC Name */
 #define CONFIG_MACH_SHEEVAPLUG	/* Machine type */
-
-#define CONFIG_MD5	/* get_random_hex on krikwood needs MD5 support */
 #define CONFIG_SKIP_LOWLEVEL_INIT	/* disable board lowlevel_init */
-#define CONFIG_KIRKWOOD_EGIGA_INIT	/* Enable GbePort0/1 for kernel */
-#define CONFIG_KIRKWOOD_RGMII_PAD_1V8	/* Set RGMII Pad voltage to 1.8V */
-
-/*
- * CLKs configurations
- */
-#define CONFIG_SYS_HZ		1000
-
-/*
- * NS16550 Configuration
- */
-#define CONFIG_SYS_NS16550
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_REG_SIZE	(-4)
-#define CONFIG_SYS_NS16550_CLK		CONFIG_SYS_TCLK
-#define CONFIG_SYS_NS16550_COM1		KW_UART0_BASE
-
-/*
- * Serial Port configuration
- * The following definitions let you select what serial you want to use
- * for your console driver.
- */
-
-#define CONFIG_CONS_INDEX	1	/*Console on UART0 */
-#define CONFIG_BAUDRATE			115200
-#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, \
-					  115200,230400, 460800, 921600 }
-/* auto boot */
-#define CONFIG_BOOTDELAY	3	/* default enable autoboot */
-
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- */
-#define CONFIG_CMDLINE_TAG	1	/* enable passing of ATAGs  */
-#define CONFIG_INITRD_TAG	1	/* enable INITRD tag */
-#define CONFIG_SETUP_MEMORY_TAGS 1	/* enable memory tag */
-
-#define	CONFIG_SYS_PROMPT	"Marvell>> "	/* Command Prompt */
-#define	CONFIG_SYS_CBSIZE	1024	/* Console I/O Buff Size */
-#define	CONFIG_SYS_PBSIZE	(CONFIG_SYS_CBSIZE \
-		+sizeof(CONFIG_SYS_PROMPT) + 16)	/* Print Buff */
 
 /*
  * Commands configuration
  */
 #define CONFIG_SYS_NO_FLASH		/* Declare no flash (NOR/SPI) */
 #include <config_cmd_default.h>
-#define CONFIG_CMD_AUTOSCRIPT
 #define CONFIG_CMD_DHCP
 #define CONFIG_CMD_ENV
 #define CONFIG_CMD_MII
 #define CONFIG_CMD_NAND
 #define CONFIG_CMD_PING
 #define CONFIG_CMD_USB
-
 /*
- * NAND configuration
+ * mv-common.h should be defined after CMD configs since it used them
+ * to enable certain macros
  */
-#ifdef CONFIG_CMD_NAND
-#define CONFIG_NAND_KIRKWOOD
-#define CONFIG_SYS_MAX_NAND_DEVICE	1
-#define NAND_MAX_CHIPS			1
-#define CONFIG_SYS_NAND_BASE		0xD8000000	/* KW_DEFADR_NANDF */
-#define NAND_ALLOW_ERASE_ALL		1
-#endif
+#include "mv-common.h"
 
 /*
  *  Environment variables configurations
@@ -144,58 +90,14 @@
 	"x_bootargs_root=root=/dev/mtdblock3 rw rootfstype=jffs2\0"
 
 /*
- * Size of malloc() pool
- */
-#define CONFIG_SYS_MALLOC_LEN	(1024 * 1024) /* 1 MiB for malloc() */
-/* size in bytes reserved for initial data */
-#define CONFIG_SYS_GBL_DATA_SIZE	128
-
-/*
- * Other required minimal configurations
- */
-#define CONFIG_SYS_LONGHELP
-#define CONFIG_AUTO_COMPLETE
-#define CONFIG_CMDLINE_EDITING
-#define CONFIG_ARCH_CPU_INIT	/* call arch_cpu_init() */
-#define CONFIG_ARCH_MISC_INIT	/* call arch_misc_init() */
-#define CONFIG_DISPLAY_CPUINFO	/* Display cpu info */
-#define CONFIG_NR_DRAM_BANKS	4
-#define CONFIG_STACKSIZE	0x00100000	/* regular stack- 1M */
-#define CONFIG_SYS_LOAD_ADDR	0x00800000	/* default load adr- 8M */
-#define CONFIG_SYS_MEMTEST_START 0x00400000	/* 4M */
-#define CONFIG_SYS_MEMTEST_END	0x007fffff	/*(_8M -1) */
-#define CONFIG_SYS_RESET_ADDRESS 0xffff0000	/* Rst Vector Adr */
-#define CONFIG_SYS_MAXARGS	16	/* max number of command args */
-
-/*
  * Ethernet Driver configuration
  */
 #ifdef CONFIG_CMD_NET
-#define CONFIG_NETCONSOLE	/* include NetConsole support   */
-#define CONFIG_NET_MULTI	/* specify more that one ports available */
-#define	CONFIG_MII		/* expose smi ove miiphy interface */
-#define CONFIG_MVGBE		/* Enable Marvell Gbe Controller Driver */
-#define CONFIG_SYS_FAULT_ECHO_LINK_DOWN	/* detect link using phy */
 #define CONFIG_MVGBE_PORTS	{1, 0}	/* enable port 0 only */
 #define CONFIG_PHY_BASE_ADR	0
-#define CONFIG_ENV_OVERWRITE	/* ethaddr can be reprogrammed */
-#define CONFIG_RESET_PHY_R	/* use reset_phy() to init mv8831116 PHY */
 #endif /* CONFIG_CMD_NET */
 
 /*
- * USB/EHCI
- */
-#ifdef CONFIG_CMD_USB
-#define CONFIG_USB_EHCI			/* Enable EHCI USB support */
-#define CONFIG_USB_EHCI_KIRKWOOD	/* on Kirkwood platform	*/
-#define CONFIG_EHCI_IS_TDI
-#define CONFIG_USB_STORAGE
-#define CONFIG_DOS_PARTITION
-#define CONFIG_ISO_PARTITION
-#define CONFIG_SUPPORT_VFAT
-#endif /* CONFIG_CMD_USB */
-
-/*
  * File system
  */
 #define CONFIG_CMD_EXT2
diff --git a/include/configs/tx25.h b/include/configs/tx25.h
index c798570..bcc8140 100644
--- a/include/configs/tx25.h
+++ b/include/configs/tx25.h
@@ -176,8 +176,7 @@
 	"update=nand erase 0 40000;nand write ${loadaddr} 0 40000\0"	\
 	"upd=run load update\0"						\
 
-/* additions for new relocation code, must added to all boards */
-#undef CONFIG_SYS_ARM_WITHOUT_RELOC /* This board is tested with relocation support */
+/* additions for new relocation code, must be added to all boards */
 #define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM_1
 #define CONFIG_SYS_INIT_SP_ADDR		(CONFIG_SYS_SDRAM_BASE + 0x1000 - /* Fix this */ \
 					CONFIG_SYS_GBL_DATA_SIZE)
diff --git a/include/configs/vision2.h b/include/configs/vision2.h
new file mode 100644
index 0000000..44a6f8b
--- /dev/null
+++ b/include/configs/vision2.h
@@ -0,0 +1,214 @@
+/*
+ * Copyright (C) 2007, Guennadi Liakhovetski <lg@denx.de>
+ *
+ * (C) Copyright 2009 Freescale Semiconductor, Inc.
+ *
+ * Configuration settings for the MX51-3Stack Freescale board.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#include <asm/arch/imx-regs.h>
+
+#define CONFIG_MX51	/* in a mx51 */
+#define CONFIG_L2_OFF
+
+#define CONFIG_MX51_HCLK_FREQ		24000000
+#define CONFIG_MX51_CLK32		32768
+#define CONFIG_DISPLAY_CPUINFO
+#define CONFIG_DISPLAY_BOARDINFO
+
+#define CONFIG_CMDLINE_TAG	/* enable passing of ATAGs */
+#define CONFIG_REVISION_TAG
+#define CONFIG_SETUP_MEMORY_TAGS
+#define CONFIG_INITRD_TAG
+#define BOARD_LATE_INIT
+
+/*
+ * Size of malloc() pool
+ */
+#define CONFIG_SYS_MALLOC_LEN		(2048 * 1024)
+
+/* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_SIZE	128
+
+/*
+ * Hardware drivers
+ */
+#define CONFIG_MXC_UART
+#define CONFIG_SYS_MX51_UART3
+#define CONFIG_MXC_GPIO
+#define CONFIG_MXC_SPI
+#define CONFIG_HW_WATCHDOG
+
+ /*
+ * SPI Configs
+ * */
+#define CONFIG_FSL_SF
+#define CONFIG_CMD_SF
+
+#define CONFIG_SPI_FLASH
+#define CONFIG_SPI_FLASH_STMICRO
+
+/*
+ * Use gpio 4 pin 25 as chip select for SPI flash
+ * This corresponds to gpio 121
+ */
+#define CONFIG_SPI_FLASH_CS	(1 | (121 << 8))
+#define CONFIG_SF_DEFAULT_MODE   SPI_MODE_0
+#define CONFIG_SF_DEFAULT_SPEED  25000000
+
+#define CONFIG_ENV_SPI_CS	(1 | (121 << 8))
+#define CONFIG_ENV_SPI_BUS      0
+#define CONFIG_ENV_SPI_MAX_HZ	25000000
+#define CONFIG_ENV_SPI_MODE	SPI_MODE_0
+
+#define CONFIG_ENV_OFFSET       (6 * 64 * 1024)
+#define CONFIG_ENV_SECT_SIZE    (1 * 64 * 1024)
+#define CONFIG_ENV_SIZE		(4 * 1024)
+
+#define CONFIG_FSL_ENV_IN_SF
+#define CONFIG_ENV_IS_IN_SPI_FLASH
+
+/* PMIC Controller */
+#define CONFIG_FSL_PMIC
+#define CONFIG_FSL_PMIC_BUS	0
+#define CONFIG_FSL_PMIC_CS	0
+#define CONFIG_FSL_PMIC_CLK	2500000
+#define CONFIG_FSL_PMIC_MODE	SPI_MODE_0
+#define CONFIG_RTC_MC13783
+
+/*
+ * MMC Configs
+ */
+#define CONFIG_FSL_ESDHC
+#ifdef CONFIG_FSL_ESDHC
+#define CONFIG_SYS_FSL_ESDHC_ADDR	(0x70004000)
+#define CONFIG_SYS_FSL_ESDHC_NUM	1
+
+#define CONFIG_MMC
+
+#define CONFIG_CMD_MMC
+#define CONFIG_GENERIC_MMC
+#define CONFIG_CMD_FAT
+#define CONFIG_DOS_PARTITION
+#endif
+
+#define CONFIG_CMD_DATE
+
+/*
+ * Eth Configs
+ */
+#define CONFIG_HAS_ETH1
+#define CONFIG_NET_MULTI
+#define CONFIG_MII
+#define CONFIG_DISCOVER_PHY
+
+#define CONFIG_FEC_MXC
+#define IMX_FEC_BASE				FEC_BASE_ADDR
+#define CONFIG_FEC_MXC_PHYADDR		0x1F
+
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_NET
+
+/* allow to overwrite serial and ethaddr */
+#define CONFIG_ENV_OVERWRITE
+#define CONFIG_CONS_INDEX			3
+#define CONFIG_BAUDRATE				115200
+#define CONFIG_SYS_BAUDRATE_TABLE	{9600, 19200, 38400, 57600, 115200}
+
+/***********************************************************
+ * Command definition
+ ***********************************************************/
+
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_SPI
+#undef CONFIG_CMD_IMLS
+
+#define CONFIG_BOOTDELAY        3
+
+#define CONFIG_LOADADDR	0x90800000	/* loadaddr env var */
+
+#define	CONFIG_EXTRA_ENV_SETTINGS	\
+		"netdev=eth0\0"		\
+		"loadaddr=0x90800000\0"
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CONFIG_SYS_LONGHELP
+#define	CONFIG_SYS_PROMPT		"Vision II U-boot > "
+#define CONFIG_AUTO_COMPLETE
+#define CONFIG_SYS_CBSIZE		512	/* Console I/O Buffer Size */
+
+/* Print Buffer Size */
+#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + \
+					sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CONFIG_SYS_MAXARGS		64	/* max number of command args */
+#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE
+
+#define CONFIG_SYS_MEMTEST_START	0x90000000
+#define CONFIG_SYS_MEMTEST_END		0x10000
+
+#define CONFIG_SYS_LOAD_ADDR		CONFIG_LOADADDR
+
+#define CONFIG_SYS_HZ			1000
+#define CONFIG_CMDLINE_EDITING
+#define CONFIG_SYS_HUSH_PARSER
+#define	CONFIG_SYS_PROMPT_HUSH_PS2	"Vision II U-boot > "
+
+/*
+ * Stack sizes
+ */
+#define CONFIG_STACKSIZE		(128 * 1024)	/* regular stack */
+
+/*
+ * Physical Memory Map
+ */
+#define CONFIG_NR_DRAM_BANKS		2
+#define PHYS_SDRAM_1			CSD0_BASE_ADDR
+#define PHYS_SDRAM_1_SIZE		(256 * 1024 * 1024)
+#define PHYS_SDRAM_2			CSD1_BASE_ADDR
+#define PHYS_SDRAM_2_SIZE		(256 * 1024 * 1024)
+#define CONFIG_SYS_SDRAM_BASE		0x90000000
+#define CONFIG_SYS_INIT_RAM_ADDR	0x1FFE8000
+
+#ifndef CONFIG_SYS_ARM_WITHOUT_RELOC
+#define CONFIG_SYS_INIT_RAM_END		(64 * 1024)
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - \
+					CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_ADDR		(CONFIG_SYS_INIT_RAM_ADDR + \
+					CONFIG_SYS_GBL_DATA_OFFSET)
+#undef CONFIG_SKIP_RELOCATE_UBOOT
+#else
+#define CONFIG_SKIP_RELOCATE_UBOOT
+#define CONFIG_SYS_INIT_SP_ADDR		(CONFIG_SYS_INIT_RAM_ADDR + 0x2000)
+#endif
+
+#define CONFIG_BOARD_EARLY_INIT_F
+
+/* 166 MHz DDR RAM */
+#define CONFIG_SYS_DDR_CLKSEL		0
+#define CONFIG_SYS_CLKTL_CBCDR		0x19239100
+
+#define CONFIG_SYS_NO_FLASH
+
+#endif				/* __CONFIG_H */
diff --git a/include/mc13892.h b/include/mc13892.h
index b291757..791e3ec 100644
--- a/include/mc13892.h
+++ b/include/mc13892.h
@@ -157,4 +157,7 @@
 #define VSDSTBY		(1 << 19)
 #define VSDMODE		(1 << 20)
 
+/* Reg Power Control 2*/
+#define WDIRESET	(1 << 12)
+
 #endif
diff --git a/include/mxc_gpio.h b/include/mxc_gpio.h
new file mode 100644
index 0000000..002ba61
--- /dev/null
+++ b/include/mxc_gpio.h
@@ -0,0 +1,52 @@
+/*
+ *
+ * (c) 2007 Pengutronix, Sascha Hauer <s.hauer@pengutronix.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __MXC_GPIO_H
+#define __MXC_GPIO_H
+
+enum mxc_gpio_direction {
+	MXC_GPIO_DIRECTION_IN,
+	MXC_GPIO_DIRECTION_OUT,
+};
+
+#ifdef CONFIG_MXC_GPIO
+extern int mxc_gpio_direction(unsigned int gpio,
+			       enum mxc_gpio_direction direction);
+extern void mxc_gpio_set(unsigned int gpio, unsigned int value);
+extern int mxc_gpio_get(unsigned int gpio);
+#else
+static inline int mxc_gpio_direction(unsigned int gpio,
+				      enum mxc_gpio_direction direction)
+{
+	return 1;
+}
+static inline int mxc_gpio_get(unsigned int gpio)
+{
+	return 1;
+}
+static inline void mxc_gpio_set(unsigned int gpio, unsigned int value)
+{
+}
+#endif
+
+#endif