powerpc: p1022ds: Enable P1022DS to boot from SD Card with SPL

Enable p1022ds to start from eSDHC with SPL.

Signed-off-by: Ying Zhang <b40530@freescale.com>
Acked-by: York Sun <yorksun@freescale.com>

6 files changed, 179 insertions, 17 deletions

diff --git a/README b/README
index 301d1a9..18f5233 100644
--- a/README
+++ b/README
@@ -3094,6 +3094,10 @@ FIT uImage format:
 		Set for the SPL on PPC mpc8xxx targets, support for
 		arch/powerpc/cpu/mpc8xxx/ddr/libddr.o in SPL binary.
 
+		CONFIG_SPL_COMMON_INIT_DDR
+		Set for common ddr init with serial presence detect in
+		SPL binary.
+
 		CONFIG_SYS_NAND_5_ADDR_CYCLE, CONFIG_SYS_NAND_PAGE_COUNT,
 		CONFIG_SYS_NAND_PAGE_SIZE, CONFIG_SYS_NAND_OOBSIZE,
 		CONFIG_SYS_NAND_BLOCK_SIZE, CONFIG_SYS_NAND_BAD_BLOCK_POS,
diff --git a/board/freescale/common/Makefile b/board/freescale/common/Makefile
index 457d1ad..f9550c4 100644
--- a/board/freescale/common/Makefile
+++ b/board/freescale/common/Makefile
@@ -45,9 +45,7 @@ COBJS-$(CONFIG_MPC8555CDS)	+= cds_pci_ft.o
 
 COBJS-$(CONFIG_MPC8536DS)	+= ics307_clk.o
 COBJS-$(CONFIG_MPC8572DS)	+= ics307_clk.o
-ifndef CONFIG_SPL_BUILD
 COBJS-$(CONFIG_P1022DS)		+= ics307_clk.o
-endif
 COBJS-$(CONFIG_P2020DS)		+= ics307_clk.o
 COBJS-$(CONFIG_P3041DS)		+= ics307_clk.o
 COBJS-$(CONFIG_P4080DS)		+= ics307_clk.o
diff --git a/board/freescale/p1022ds/Makefile b/board/freescale/p1022ds/Makefile
index cfc05f7..3bc4f43 100644
--- a/board/freescale/p1022ds/Makefile
+++ b/board/freescale/p1022ds/Makefile
@@ -21,6 +21,9 @@ ifdef MINIMAL
 COBJS-y        += spl_minimal.o tlb.o law.o
 
 else
+ifdef CONFIG_SPL_BUILD
+COBJS-y += spl.o
+endif
 COBJS-y	+= $(BOARD).o
 COBJS-y	+= ddr.o
 COBJS-y	+= law.o
diff --git a/board/freescale/p1022ds/spl.c b/board/freescale/p1022ds/spl.c
new file mode 100644
index 0000000..71a0f85
--- /dev/null
+++ b/board/freescale/p1022ds/spl.c
@@ -0,0 +1,110 @@
+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ *
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+#include <common.h>
+#include <ns16550.h>
+#include <malloc.h>
+#include <mmc.h>
+#include <nand.h>
+#include <i2c.h>
+#include "../common/ngpixis.h"
+#include <fsl_esdhc.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+static const u32 sysclk_tbl[] = {
+	66666000, 7499900, 83332500, 8999900,
+	99999000, 11111000, 12499800, 13333200
+};
+
+ulong get_effective_memsize(void)
+{
+	return CONFIG_SYS_L2_SIZE;
+}
+
+void board_init_f(ulong bootflag)
+{
+	int px_spd;
+	u32 plat_ratio, sys_clk, bus_clk;
+	ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR;
+
+	console_init_f();
+
+	/* Set pmuxcr to allow both i2c1 and i2c2 */
+	setbits_be32(&gur->pmuxcr, in_be32(&gur->pmuxcr) | 0x1000);
+	setbits_be32(&gur->pmuxcr,
+		     in_be32(&gur->pmuxcr) | MPC85xx_PMUXCR_SD_DATA);
+
+	/* Read back the register to synchronize the write. */
+	in_be32(&gur->pmuxcr);
+
+	/* initialize selected port with appropriate baud rate */
+	px_spd = in_8((unsigned char *)(PIXIS_BASE + PIXIS_SPD));
+	sys_clk = sysclk_tbl[px_spd & PIXIS_SPD_SYSCLK_MASK];
+	plat_ratio = in_be32(&gur->porpllsr) & MPC85xx_PORPLLSR_PLAT_RATIO;
+	bus_clk = sys_clk * plat_ratio / 2;
+
+	NS16550_init((NS16550_t)CONFIG_SYS_NS16550_COM1,
+		     bus_clk / 16 / CONFIG_BAUDRATE);
+#ifdef CONFIG_SPL_MMC_BOOT
+	puts("\nSD boot...\n");
+#endif
+
+	/* copy code to RAM and jump to it - this should not return */
+	/* NOTE - code has to be copied out of NAND buffer before
+	 * other blocks can be read.
+	 */
+	relocate_code(CONFIG_SPL_RELOC_STACK, 0, CONFIG_SPL_RELOC_TEXT_BASE);
+}
+
+void board_init_r(gd_t *gd, ulong dest_addr)
+{
+	/* Pointer is writable since we allocated a register for it */
+	gd = (gd_t *)CONFIG_SPL_GD_ADDR;
+	bd_t *bd;
+
+	memset(gd, 0, sizeof(gd_t));
+	bd = (bd_t *)(CONFIG_SPL_GD_ADDR + sizeof(gd_t));
+	memset(bd, 0, sizeof(bd_t));
+	gd->bd = bd;
+	bd->bi_memstart = CONFIG_SYS_INIT_L2_ADDR;
+	bd->bi_memsize = CONFIG_SYS_L2_SIZE;
+
+	probecpu();
+	get_clocks();
+	mem_malloc_init(CONFIG_SPL_RELOC_MALLOC_ADDR,
+			CONFIG_SPL_RELOC_MALLOC_SIZE);
+	env_init();
+#ifdef CONFIG_SPL_MMC_BOOT
+	mmc_initialize(bd);
+#endif
+	/* relocate environment function pointers etc. */
+	env_relocate();
+
+	i2c_init(CONFIG_SYS_FSL_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
+
+	gd->ram_size = initdram(0);
+	puts("Second program loader running in sram...\n");
+
+#ifdef CONFIG_SPL_MMC_BOOT
+	mmc_boot();
+#endif
+}
diff --git a/board/freescale/p1022ds/tlb.c b/board/freescale/p1022ds/tlb.c
index 2eef6ad..e7ae2e2 100644
--- a/board/freescale/p1022ds/tlb.c
+++ b/board/freescale/p1022ds/tlb.c
@@ -71,25 +71,32 @@ struct fsl_e_tlb_entry tlb_table[] = {
 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 		      0, 7, BOOKE_PAGESZ_4K, 1),
 
-#if defined(CONFIG_SYS_RAMBOOT) || defined(CONFIG_SPL)
+#if defined(CONFIG_SYS_RAMBOOT) || \
+	(defined(CONFIG_SPL) && !defined(CONFIG_SPL_COMMON_INIT_DDR))
 	/* **** - eSDHC/eSPI/NAND boot */
 	SET_TLB_ENTRY(1, CONFIG_SYS_DDR_SDRAM_BASE, CONFIG_SYS_DDR_SDRAM_BASE,
-			MAS3_SX|MAS3_SW|MAS3_SR, 0,
-			0, 8, BOOKE_PAGESZ_1G, 1),
+		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
+		      0, 8, BOOKE_PAGESZ_1G, 1),
 	/* **** - eSDHC/eSPI/NAND boot - second 1GB of memory */
 	SET_TLB_ENTRY(1, CONFIG_SYS_DDR_SDRAM_BASE + 0x40000000,
-			CONFIG_SYS_DDR_SDRAM_BASE + 0x40000000,
-			MAS3_SX|MAS3_SW|MAS3_SR, 0,
-			0, 9, BOOKE_PAGESZ_1G, 1),
+		      CONFIG_SYS_DDR_SDRAM_BASE + 0x40000000,
+		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
+		      0, 9, BOOKE_PAGESZ_1G, 1),
 #endif
 
 #ifdef CONFIG_SYS_NAND_BASE
 	/* *I*G - NAND */
 	SET_TLB_ENTRY(1, CONFIG_SYS_NAND_BASE, CONFIG_SYS_NAND_BASE_PHYS,
-			MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
-			0, 10, BOOKE_PAGESZ_16K, 1),
+		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+		      0, 10, BOOKE_PAGESZ_16K, 1),
 #endif
 
+#ifdef CONFIG_SYS_INIT_L2_ADDR
+	/* *I*G - L2SRAM */
+	SET_TLB_ENTRY(1, CONFIG_SYS_INIT_L2_ADDR, CONFIG_SYS_INIT_L2_ADDR_PHYS,
+		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_G,
+		      0, 11, BOOKE_PAGESZ_256K, 1)
+#endif
 };
 
 int num_tlb_entries = ARRAY_SIZE(tlb_table);
diff --git a/include/configs/P1022DS.h b/include/configs/P1022DS.h
index 5ca7f07..6db0c27 100644
--- a/include/configs/P1022DS.h
+++ b/include/configs/P1022DS.h
@@ -16,11 +16,32 @@
 #endif
 
 #ifdef CONFIG_SDCARD
-#define CONFIG_RAMBOOT_SDCARD
-#define CONFIG_SYS_RAMBOOT
-#define CONFIG_SYS_EXTRA_ENV_RELOC
-#define CONFIG_SYS_TEXT_BASE		0x11000000
-#define CONFIG_RESET_VECTOR_ADDRESS	0x1107fffc
+#define CONFIG_SPL
+#define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
+#define CONFIG_SPL_ENV_SUPPORT
+#define CONFIG_SPL_SERIAL_SUPPORT
+#define CONFIG_SPL_MMC_SUPPORT
+#define CONFIG_SPL_MMC_MINIMAL
+#define CONFIG_SPL_FLUSH_IMAGE
+#define CONFIG_SPL_TARGET		"u-boot-with-spl.bin"
+#define CONFIG_SPL_LIBGENERIC_SUPPORT
+#define CONFIG_SPL_LIBCOMMON_SUPPORT
+#define CONFIG_SPL_I2C_SUPPORT
+#define CONFIG_FSL_LAW			/* Use common FSL init code */
+#define CONFIG_SYS_TEXT_BASE		0x11001000
+#define CONFIG_SPL_TEXT_BASE		0xf8f81000
+#define CONFIG_SPL_PAD_TO		0x18000
+#define CONFIG_SPL_MAX_SIZE		(96 * 1024)
+#define CONFIG_SYS_MMC_U_BOOT_SIZE	(512 << 10)
+#define CONFIG_SYS_MMC_U_BOOT_DST	(0x11000000)
+#define CONFIG_SYS_MMC_U_BOOT_START	(0x11000000)
+#define CONFIG_SYS_MMC_U_BOOT_OFFS	(96 << 10)
+#define CONFIG_SYS_MPC85XX_NO_RESETVEC
+#define CONFIG_SYS_LDSCRIPT		"arch/powerpc/cpu/mpc85xx/u-boot.lds"
+#define CONFIG_SPL_MMC_BOOT
+#ifdef CONFIG_SPL_BUILD
+#define CONFIG_SPL_COMMON_INIT_DDR
+#endif
 #endif
 
 #ifdef CONFIG_SPIFLASH
@@ -291,6 +312,24 @@
 #define CONFIG_SYS_MALLOC_LEN		(10 * 1024 * 1024)
 
 /*
+ * Config the L2 Cache as L2 SRAM
+*/
+#if defined(CONFIG_SPL_BUILD)
+#if defined(CONFIG_SDCARD)
+#define CONFIG_SYS_INIT_L2_ADDR	0xf8f80000
+#define CONFIG_SYS_INIT_L2_ADDR_PHYS	CONFIG_SYS_INIT_L2_ADDR
+#define CONFIG_SYS_L2_SIZE		(256 << 10)
+#define CONFIG_SYS_INIT_L2_END	(CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE)
+#define CONFIG_SPL_RELOC_TEXT_BASE	0xf8f81000
+#define CONFIG_SPL_RELOC_STACK		(CONFIG_SYS_INIT_L2_ADDR + 128 * 1024)
+#define CONFIG_SPL_RELOC_STACK_SIZE	(32 << 10)
+#define CONFIG_SPL_RELOC_MALLOC_ADDR	(CONFIG_SYS_INIT_L2_ADDR + 160 * 1024)
+#define CONFIG_SPL_RELOC_MALLOC_SIZE	(96 << 10)
+#define CONFIG_SPL_GD_ADDR		(CONFIG_SYS_INIT_L2_ADDR + 112 * 1024)
+#endif
+#endif
+
+/*
  * Serial Port
  */
 #define CONFIG_CONS_INDEX		1
@@ -298,7 +337,7 @@
 #define CONFIG_SYS_NS16550_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE	1
 #define CONFIG_SYS_NS16550_CLK		get_bus_freq(0)
-#ifdef CONFIG_SPL_BUILD
+#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_INIT_MINIMAL)
 #define CONFIG_NS16550_MIN_FUNCTIONS
 #endif
 
@@ -529,8 +568,9 @@
 #define CONFIG_ENV_SIZE		0x2000	/* 8KB */
 #define CONFIG_ENV_OFFSET	0x100000	/* 1MB */
 #define CONFIG_ENV_SECT_SIZE	0x10000
-#elif defined(CONFIG_RAMBOOT_SDCARD)
+#elif defined(CONFIG_SDCARD)
 #define CONFIG_ENV_IS_IN_MMC
+#define CONFIG_FSL_FIXED_MMC_LOCATION
 #define CONFIG_ENV_SIZE		0x2000
 #define CONFIG_SYS_MMC_ENV_DEV	0
 #elif defined(CONFIG_NAND)