powerpc/mpc85xx/p2020rdb-pca: Use L2 SRAM for SPL boot

This allows DDR configuration to be deferred to the final U-Boot image,
which is able to make use of SPD data.  The SPL itself cannot use SPD due
to code size constraints.  It previously used fixed register values for
DDR configuration, and those values did not work on the p2020rdb-pca
board I tested with.  It's possible that different revisions of the board
require different settings.  Using SPD eliminates that problem.

Signed-off-by: Scott Wood <scottwood@freescale.com>
Cc: Andy Fleming <afleming@freescale.com>

4 files changed, 54 insertions, 39 deletions

diff --git a/board/freescale/p1_p2_rdb_pc/ddr.c b/board/freescale/p1_p2_rdb_pc/ddr.c
index 88ba56f..9355536 100644
--- a/board/freescale/p1_p2_rdb_pc/ddr.c
+++ b/board/freescale/p1_p2_rdb_pc/ddr.c
@@ -206,6 +206,7 @@ int fsl_ddr_get_dimm_params(dimm_params_t *pdimm,
 }
 #endif /* CONFIG_SYS_DDR_RAW_TIMING */
 
+#ifdef CONFIG_SYS_DDR_CS0_BNDS
 /* Fixed sdram init -- doesn't use serial presence detect. */
 phys_size_t fixed_sdram(void)
 {
@@ -260,6 +261,7 @@ phys_size_t fixed_sdram(void)
 
 	return ddr_size;
 }
+#endif
 
 void fsl_ddr_board_options(memctl_options_t *popts,
 				dimm_params_t *pdimm,
diff --git a/board/freescale/p1_p2_rdb_pc/spl_minimal.c b/board/freescale/p1_p2_rdb_pc/spl_minimal.c
index 5c893ee..d48fb01 100644
--- a/board/freescale/p1_p2_rdb_pc/spl_minimal.c
+++ b/board/freescale/p1_p2_rdb_pc/spl_minimal.c
@@ -23,16 +23,18 @@
 #include <ns16550.h>
 #include <asm/io.h>
 #include <nand.h>
+#include <linux/compiler.h>
 #include <asm/fsl_law.h>
 #include <asm/fsl_ddr_sdram.h>
 #include <asm/global_data.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
+#ifndef CONFIG_SYS_INIT_L2_ADDR
 /*
  * Fixed sdram init -- doesn't use serial presence detect.
  */
-void sdram_init(void)
+static void sdram_init(void)
 {
 	ccsr_ddr_t *ddr = (ccsr_ddr_t *)CONFIG_SYS_MPC85xx_DDR_ADDR;
 
@@ -71,6 +73,7 @@ void sdram_init(void)
 
 	set_next_law(0, CONFIG_SYS_SDRAM_SIZE_LAW, LAW_TRGT_IF_DDR_1);
 }
+#endif
 
 void board_init_f(ulong bootflag)
 {
@@ -101,8 +104,10 @@ void board_init_f(ulong bootflag)
 	__raw_writel(0x00000000, &pgpio->gpdir);
 #endif
 
+#ifndef CONFIG_SYS_INIT_L2_ADDR
 	/* Initialize the DDR3 */
 	sdram_init();
+#endif
 
 	/* copy code to RAM and jump to it - this should not return */
 	/* NOTE - code has to be copied out of NAND buffer before
diff --git a/board/freescale/p1_p2_rdb_pc/tlb.c b/board/freescale/p1_p2_rdb_pc/tlb.c
index 0873dd7..3e4dffd 100644
--- a/board/freescale/p1_p2_rdb_pc/tlb.c
+++ b/board/freescale/p1_p2_rdb_pc/tlb.c
@@ -95,6 +95,16 @@ struct fsl_e_tlb_entry tlb_table[] = {
 #endif
 
 #if defined(CONFIG_SYS_RAMBOOT) || defined(CONFIG_SPL)
+#ifdef CONFIG_SYS_INIT_L2_ADDR
+	/* L2SRAM */
+	SET_TLB_ENTRY(1, CONFIG_SYS_INIT_L2_ADDR, CONFIG_SYS_INIT_L2_ADDR_PHYS,
+		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+		      0, 8, BOOKE_PAGESZ_256K, 1),
+	SET_TLB_ENTRY(1, CONFIG_SYS_INIT_L2_ADDR + 0x40000,
+		      CONFIG_SYS_INIT_L2_ADDR_PHYS + 0x40000,
+		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+		      0, 12, BOOKE_PAGESZ_256K, 1),
+#else
 	/* *I*G - eSDHC/eSPI/NAND boot */
 	SET_TLB_ENTRY(1, CONFIG_SYS_DDR_SDRAM_BASE, CONFIG_SYS_DDR_SDRAM_BASE,
 			MAS3_SX|MAS3_SW|MAS3_SR, 0,
@@ -106,8 +116,9 @@ struct fsl_e_tlb_entry tlb_table[] = {
 			CONFIG_SYS_DDR_SDRAM_BASE + 0x40000000,
 			MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 			0, 9, BOOKE_PAGESZ_1G, 1),
-#endif
-#endif
+#endif /* P1020MBG */
+#endif /* not L2 SRAM */
+#endif /* RAMBOOT/SPL */
 };
 
 int num_tlb_entries = ARRAY_SIZE(tlb_table);
diff --git a/include/configs/p1_p2_rdb_pc.h b/include/configs/p1_p2_rdb_pc.h
index ba7a364..964bfcd 100644
--- a/include/configs/p1_p2_rdb_pc.h
+++ b/include/configs/p1_p2_rdb_pc.h
@@ -38,6 +38,7 @@
 #define __SW_BOOT_MASK		0x03
 #define __SW_BOOT_NOR		0xe4
 #define __SW_BOOT_SD		0x54
+#define CONFIG_SYS_L2_SIZE	(256 << 10)
 #endif
 
 #if defined(CONFIG_P1020UTM)
@@ -46,6 +47,7 @@
 #define __SW_BOOT_MASK		0x03
 #define __SW_BOOT_NOR		0xe0
 #define __SW_BOOT_SD		0x50
+#define CONFIG_SYS_L2_SIZE	(256 << 10)
 #endif
 
 #if defined(CONFIG_P1020RDB)
@@ -61,6 +63,7 @@
 #define __SW_BOOT_SD		0x9c
 #define __SW_BOOT_NAND		0xec
 #define __SW_BOOT_PCIE		0x6c
+#define CONFIG_SYS_L2_SIZE	(256 << 10)
 #endif
 
 #if defined(CONFIG_P1021RDB)
@@ -78,6 +81,7 @@
 #define __SW_BOOT_SD		0x9c
 #define __SW_BOOT_NAND		0xec
 #define __SW_BOOT_PCIE		0x6c
+#define CONFIG_SYS_L2_SIZE	(256 << 10)
 #endif
 
 #if defined(CONFIG_P1024RDB)
@@ -91,6 +95,7 @@
 #define __SW_BOOT_SPI		0x08
 #define __SW_BOOT_SD		0x04
 #define __SW_BOOT_NAND		0x0c
+#define CONFIG_SYS_L2_SIZE	(256 << 10)
 #endif
 
 #if defined(CONFIG_P1025RDB)
@@ -108,6 +113,7 @@
 #define __SW_BOOT_SPI		0x08
 #define __SW_BOOT_SD		0x04
 #define __SW_BOOT_NAND		0x0c
+#define CONFIG_SYS_L2_SIZE	(256 << 10)
 #endif
 
 #if defined(CONFIG_P2020RDB)
@@ -122,6 +128,14 @@
 #define __SW_BOOT_SD		0x68 /* or 0x18 */
 #define __SW_BOOT_NAND		0xe8
 #define __SW_BOOT_PCIE		0xa8
+#define CONFIG_SYS_L2_SIZE	(512 << 10)
+#endif
+
+#if CONFIG_SYS_L2_SIZE >= (512 << 10)
+/* must be 32-bit */
+#define CONFIG_SYS_INIT_L2_ADDR	0xf8f80000
+#define CONFIG_SYS_INIT_L2_ADDR_PHYS CONFIG_SYS_INIT_L2_ADDR
+#define CONFIG_SYS_INIT_L2_END  (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE)
 #endif
 
 #ifdef CONFIG_SDCARD
@@ -149,14 +163,28 @@
 #define CONFIG_SPL_FLUSH_IMAGE
 #define CONFIG_SPL_TARGET		"u-boot-with-spl.bin"
 
-#define CONFIG_SYS_TEXT_BASE		0x00201000
 #define CONFIG_SPL_TEXT_BASE		0xfffff000
 #define CONFIG_SPL_MAX_SIZE		(4 * 1024)
+
+#ifdef CONFIG_SYS_INIT_L2_ADDR
+/* We multiply CONFIG_SPL_MAX_SIZE by two to leave some room for BSS. */
+#define CONFIG_SYS_TEXT_BASE		0xf8f82000
+#define CONFIG_SPL_RELOC_TEXT_BASE	\
+	(CONFIG_SYS_INIT_L2_END - CONFIG_SPL_MAX_SIZE * 2)
+#define CONFIG_SPL_RELOC_STACK		\
+	(CONFIG_SYS_INIT_L2_END - CONFIG_SPL_MAX_SIZE * 2)
+#define CONFIG_SYS_NAND_U_BOOT_DST	(CONFIG_SYS_INIT_L2_ADDR)
+#define CONFIG_SYS_NAND_U_BOOT_START	\
+	(CONFIG_SYS_INIT_L2_ADDR + CONFIG_SPL_MAX_SIZE)
+#else
+#define CONFIG_SYS_TEXT_BASE		0x00201000
 #define CONFIG_SPL_RELOC_TEXT_BASE	0x00100000
 #define CONFIG_SPL_RELOC_STACK		0x00100000
-#define CONFIG_SYS_NAND_U_BOOT_SIZE	((512 << 10) + CONFIG_SPL_MAX_SIZE)
 #define CONFIG_SYS_NAND_U_BOOT_DST	(0x00200000 - CONFIG_SPL_MAX_SIZE)
 #define CONFIG_SYS_NAND_U_BOOT_START	0x00200000
+#endif
+
+#define CONFIG_SYS_NAND_U_BOOT_SIZE	((512 << 10) - 0x2000)
 #define CONFIG_SYS_NAND_U_BOOT_OFFS	0
 #define CONFIG_SYS_LDSCRIPT		"arch/powerpc/cpu/mpc85xx/u-boot-nand.lds"
 #endif
@@ -261,39 +289,7 @@
 #define CONFIG_DIMM_SLOTS_PER_CTLR	1
 
 /* Default settings for DDR3 */
-#ifdef CONFIG_P2020RDB
-#define CONFIG_SYS_DDR_CS0_BNDS		0x0000003f
-#define CONFIG_SYS_DDR_CS0_CONFIG	0x80014202
-#define CONFIG_SYS_DDR_CS0_CONFIG_2	0x00000000
-#define CONFIG_SYS_DDR_CS1_BNDS		0x00000000
-#define CONFIG_SYS_DDR_CS1_CONFIG	0x00000000
-#define CONFIG_SYS_DDR_CS1_CONFIG_2	0x00000000
-
-#define CONFIG_SYS_DDR_DATA_INIT	0xdeadbeef
-#define CONFIG_SYS_DDR_INIT_ADDR	0x00000000
-#define CONFIG_SYS_DDR_INIT_EXT_ADDR	0x00000000
-#define CONFIG_SYS_DDR_MODE_CONTROL	0x00000000
-
-#define CONFIG_SYS_DDR_ZQ_CONTROL	0x89080600
-#define CONFIG_SYS_DDR_WRLVL_CONTROL	0x8645F607
-#define CONFIG_SYS_DDR_SR_CNTR		0x00000000
-#define CONFIG_SYS_DDR_RCW_1		0x00000000
-#define CONFIG_SYS_DDR_RCW_2		0x00000000
-#define CONFIG_SYS_DDR_CONTROL		0xC7000000	/* Type = DDR3	*/
-#define CONFIG_SYS_DDR_CONTROL_2	0x24401000
-#define CONFIG_SYS_DDR_TIMING_4		0x00220001
-#define CONFIG_SYS_DDR_TIMING_5		0x02401400
-
-#define CONFIG_SYS_DDR_TIMING_3		0x00020000
-#define CONFIG_SYS_DDR_TIMING_0		0x00330104
-#define CONFIG_SYS_DDR_TIMING_1		0x6f6B4644
-#define CONFIG_SYS_DDR_TIMING_2		0x0FA88CCF
-#define CONFIG_SYS_DDR_CLK_CTRL		0x02000000
-#define CONFIG_SYS_DDR_MODE_1		0x00421422
-#define CONFIG_SYS_DDR_MODE_2		0x04000000
-#define CONFIG_SYS_DDR_INTERVAL		0x0C300100
-
-#else
+#ifndef CONFIG_P2020RDB
 #define CONFIG_SYS_DDR_CS0_BNDS		0x0000003f
 #define CONFIG_SYS_DDR_CS0_CONFIG	0x80014302
 #define CONFIG_SYS_DDR_CS0_CONFIG_2	0x00000000
@@ -334,13 +330,14 @@
  * 0x0000_0000 0x7fff_ffff	DDR		Up to 2GB cacheable
  * 0x8000_0000 0xdfff_ffff	PCI Express Mem	1.5G non-cacheable(PCIe * 3)
  * 0xec00_0000 0xefff_ffff	NOR flash	Up to 64M non-cacheable	CS0/1
+ * 0xf8f8_0000 0xf8ff_ffff	L2 SRAM		Up to 512K cacheable
+ *   (early boot only)
  * 0xff80_0000 0xff80_7fff	NAND flash	32K non-cacheable	CS1/0
  * 0xff98_0000 0xff98_ffff	PMC		64K non-cacheable	CS2
  * 0xffa0_0000 0xffaf_ffff	CPLD		1M non-cacheable	CS3
  * 0xffb0_0000 0xffbf_ffff	VSC7385 switch  1M non-cacheable	CS2
  * 0xffc0_0000 0xffc3_ffff	PCI IO range	256k non-cacheable
  * 0xffd0_0000 0xffd0_3fff	L1 for stack	16K cacheable
- * 0xffd8_0000 0xffdf_ffff	L2 SRAM		Up to 512K cacheable
  * 0xffe0_0000 0xffef_ffff	CCSR		1M non-cacheable
  */