Merge branch 'master' of git://git.denx.de/u-boot-coldfire

7 files changed, 147 insertions, 26 deletions

diff --git a/common/cmd_bdinfo.c b/common/cmd_bdinfo.c
index 8e9251d..b2d6f84 100644
--- a/common/cmd_bdinfo.c
+++ b/common/cmd_bdinfo.c
@@ -283,6 +283,7 @@ int do_bdinfo ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 #if defined(CONFIG_SYS_MBAR)
 	print_num ("mbar",		bd->bi_mbar_base);
 #endif
+	print_str ("cpufreq",		strmhz(buf, bd->bi_intfreq));
 	print_str ("busfreq",		strmhz(buf, bd->bi_busfreq));
 #ifdef CONFIG_PCI
 	print_str ("pcifreq",		strmhz(buf, bd->bi_pcifreq));
@@ -322,7 +323,7 @@ int do_bdinfo ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 	puts ("\nip_addr     = ");
 	print_IPaddr (bd->bi_ip_addr);
 #endif
-	printf ("\nbaudrate    = %d bps\n", bd->bi_baudrate);
+	printf ("\nbaudrate    = %ld bps\n", bd->bi_baudrate);
 
 	return 0;
 }
diff --git a/cpu/mcf52x2/cpu_init.c b/cpu/mcf52x2/cpu_init.c
index 66f9164..11f70b0 100644
--- a/cpu/mcf52x2/cpu_init.c
+++ b/cpu/mcf52x2/cpu_init.c
@@ -181,9 +181,14 @@ void cpu_init_f(void)
 	/* FlexBus Chipselect */
 	init_fbcs();
 
+#ifdef CONFIG_SYS_MCF_SYNCR
+	/* Set clockspeed according to board header file */
+	mbar_writeLong(MCF_FMPLL_SYNCR, CONFIG_SYS_MCF_SYNCR);
+#else
 	/* Set clockspeed to 100MHz */
-	mbar_writeShort(MCF_FMPLL_SYNCR,
+	mbar_writeLong(MCF_FMPLL_SYNCR,
 			MCF_FMPLL_SYNCR_MFD(0) | MCF_FMPLL_SYNCR_RFD(0));
+#endif
 	while (!mbar_readByte(MCF_FMPLL_SYNSR) & MCF_FMPLL_SYNSR_LOCK) ;
 }
 
@@ -219,7 +224,8 @@ int fecpin_setclear(struct eth_device *dev, int setclear)
 {
 	if (setclear) {
 		/* Enable Ethernet pins */
-		mbar_writeByte(MCF_GPIO_PAR_FECI2C, CONFIG_SYS_FECI2C);
+		mbar_writeByte(MCF_GPIO_PAR_FECI2C,
+			       (mbar_readByte(MCF_GPIO_PAR_FECI2C) | 0xF0));
 	} else {
 	}
 
diff --git a/cpu/mcf52x2/speed.c b/cpu/mcf52x2/speed.c
index fe51fb4..c93a518 100644
--- a/cpu/mcf52x2/speed.c
+++ b/cpu/mcf52x2/speed.c
@@ -77,7 +77,8 @@ int get_clocks (void)
 #endif
 
 	gd->cpu_clk = CONFIG_SYS_CLK;
-#if defined(CONFIG_M5249) || defined(CONFIG_M5253) || defined(CONFIG_M5275)
+#if defined(CONFIG_M5249) || defined(CONFIG_M5253) || \
+    defined(CONFIG_M5271) || defined(CONFIG_M5275)
 	gd->bus_clk = gd->cpu_clk / 2;
 #else
 	gd->bus_clk = gd->cpu_clk;
diff --git a/drivers/net/mcfmii.c b/drivers/net/mcfmii.c
index 2b733c6..4f1c0a0 100644
--- a/drivers/net/mcfmii.c
+++ b/drivers/net/mcfmii.c
@@ -226,7 +226,8 @@ void __mii_init(void)
 	volatile FEC_T *fecp;
 	struct eth_device *dev;
 	int miispd = 0, i = 0;
-	u16 autoneg = 0;
+	u16 status = 0;
+	u16 linkgood = 0;
 
 	/* retrieve from register structure */
 	dev = eth_get_dev();
@@ -250,22 +251,32 @@ void __mii_init(void)
 
 	info->phy_addr = mii_discover_phy(dev);
 
-#define AUTONEGLINK		(PHY_BMSR_AUTN_COMP | PHY_BMSR_LS)
 	while (i < MCFFEC_TOUT_LOOP) {
-		autoneg = 0;
-		miiphy_read(dev->name, info->phy_addr, PHY_BMSR, &autoneg);
+		status = 0;
 		i++;
-
-		if ((autoneg & AUTONEGLINK) == AUTONEGLINK)
+		/* Read PHY control register */
+		miiphy_read(dev->name, info->phy_addr, PHY_BMCR, &status);
+
+		/* If phy set to autonegotiate, wait for autonegotiation done,
+		 * if phy is not autonegotiating, just wait for link up.
+		 */
+		if ((status & PHY_BMCR_AUTON) == PHY_BMCR_AUTON) {
+			linkgood = (PHY_BMSR_AUTN_COMP | PHY_BMSR_LS);
+		} else {
+			linkgood = PHY_BMSR_LS;
+		}
+		/* Read PHY status register */
+		miiphy_read(dev->name, info->phy_addr, PHY_BMSR, &status);
+		if ((status & linkgood) == linkgood)
 			break;
 
 		udelay(500);
 	}
 	if (i >= MCFFEC_TOUT_LOOP) {
-		printf("Auto Negotiation not complete\n");
+		printf("Link UP timeout\n");
 	}
 
-	/* adapt to the half/full speed settings */
+	/* adapt to the duplex and speed settings of the phy */
 	info->dup_spd = miiphy_duplex(dev->name, info->phy_addr) << 16;
 	info->dup_spd |= miiphy_speed(dev->name, info->phy_addr);
 }
diff --git a/drivers/serial/mcfuart.c b/drivers/serial/mcfuart.c
index e04fc29..0b53140 100644
--- a/drivers/serial/mcfuart.c
+++ b/drivers/serial/mcfuart.c
@@ -115,8 +115,9 @@ void serial_setbrg(void)
 	volatile uart_t *uart = (volatile uart_t *)(CONFIG_SYS_UART_BASE);
 	u32 counter;
 
-	counter = ((gd->bus_clk / gd->baudrate)) >> 5;
-	counter++;
+	/* Setting up BaudRate */
+	counter = (u32) ((gd->bus_clk / 32) + (gd->baudrate / 2));
+	counter = counter / gd->baudrate;
 
 	/* write to CTUR: divide counter upper byte */
 	uart->ubg1 = ((counter & 0xff00) >> 8);
diff --git a/include/asm-m68k/m5271.h b/include/asm-m68k/m5271.h
index 7877616..d25261b 100644
--- a/include/asm-m68k/m5271.h
+++ b/include/asm-m68k/m5271.h
@@ -37,8 +37,27 @@
 
 #define MCF_FMPLL_SYNCR				0x120000
 #define MCF_FMPLL_SYNSR				0x120004
+
 #define MCF_FMPLL_SYNCR_MFD(x)			((x&0x7)<<24)
+#define MCF_SYNCR_MFD_4X		0x00000000
+#define MCF_SYNCR_MFD_6X		0x01000000
+#define MCF_SYNCR_MFD_8X		0x02000000
+#define MCF_SYNCR_MFD_10X		0x03000000
+#define MCF_SYNCR_MFD_12X		0x04000000
+#define MCF_SYNCR_MFD_14X		0x05000000
+#define MCF_SYNCR_MFD_16X		0x06000000
+#define MCF_SYNCR_MFD_18X		0x07000000
+
 #define MCF_FMPLL_SYNCR_RFD(x)			((x&0x7)<<19)
+#define MCF_SYNCR_RFD_DIV1		0x00000000
+#define MCF_SYNCR_RFD_DIV2		0x00080000
+#define MCF_SYNCR_RFD_DIV4		0x00100000
+#define MCF_SYNCR_RFD_DIV8		0x00180000
+#define MCF_SYNCR_RFD_DIV16		0x00200000
+#define MCF_SYNCR_RFD_DIV32		0x00280000
+#define MCF_SYNCR_RFD_DIV64		0x00300000
+#define MCF_SYNCR_RFD_DIV128		0x00380000
+
 #define MCF_FMPLL_SYNSR_LOCK			0x8
 
 #define MCF_WTM_WCR				0x140000
@@ -50,17 +69,79 @@
 #define MCF_RCM_RCR_FRCRSTOUT			0x40
 #define MCF_RCM_RCR_SOFTRST			0x80
 
+#define MCF_GPIO_PODR_ADDR			0x100000
+#define MCF_GPIO_PODR_DATAH			0x100001
+#define MCF_GPIO_PODR_DATAL			0x100002
+#define MCF_GPIO_PODR_BUSCTL			0x100003
+#define MCF_GPIO_PODR_BS			0x100004
+#define MCF_GPIO_PODR_CS			0x100005
+#define MCF_GPIO_PODR_SDRAM			0x100006
+#define MCF_GPIO_PODR_FECI2C			0x100007
+#define MCF_GPIO_PODR_UARTH			0x100008
+#define MCF_GPIO_PODR_UARTL			0x100009
+#define MCF_GPIO_PODR_QSPI			0x10000A
+#define MCF_GPIO_PODR_TIMER			0x10000B
+
+#define MCF_GPIO_PDDR_ADDR			0x100010
+#define MCF_GPIO_PDDR_DATAH			0x100011
+#define MCF_GPIO_PDDR_DATAL			0x100012
+#define MCF_GPIO_PDDR_BUSCTL			0x100013
+#define MCF_GPIO_PDDR_BS			0x100014
+#define MCF_GPIO_PDDR_CS			0x100015
+#define MCF_GPIO_PDDR_SDRAM			0x100016
+#define MCF_GPIO_PDDR_FECI2C			0x100017
+#define MCF_GPIO_PDDR_UARTH			0x100018
+#define MCF_GPIO_PDDR_UARTL			0x100019
+#define MCF_GPIO_PDDR_QSPI			0x10001A
+#define MCF_GPIO_PDDR_TIMER			0x10001B
+
+#define MCF_GPIO_PPDSDR_ADDR			0x100020
+#define MCF_GPIO_PPDSDR_DATAH			0x100021
+#define MCF_GPIO_PPDSDR_DATAL			0x100022
+#define MCF_GPIO_PPDSDR_BUSCTL			0x100023
+#define MCF_GPIO_PPDSDR_BS			0x100024
+#define MCF_GPIO_PPDSDR_CS			0x100025
+#define MCF_GPIO_PPDSDR_SDRAM			0x100026
+#define MCF_GPIO_PPDSDR_FECI2C			0x100027
+#define MCF_GPIO_PPDSDR_UARTH			0x100028
+#define MCF_GPIO_PPDSDR_UARTL			0x100029
+#define MCF_GPIO_PPDSDR_QSPI			0x10002A
+#define MCF_GPIO_PPDSDR_TIMER			0x10002B
+
+#define MCF_GPIO_PCLRR_ADDR			0x100030
+#define MCF_GPIO_PCLRR_DATAH			0x100031
+#define MCF_GPIO_PCLRR_DATAL			0x100032
+#define MCF_GPIO_PCLRR_BUSCTL			0x100033
+#define MCF_GPIO_PCLRR_BS			0x100034
+#define MCF_GPIO_PCLRR_CS			0x100035
+#define MCF_GPIO_PCLRR_SDRAM			0x100036
+#define MCF_GPIO_PCLRR_FECI2C			0x100037
+#define MCF_GPIO_PCLRR_UARTH			0x100038
+#define MCF_GPIO_PCLRR_UARTL			0x100039
+#define MCF_GPIO_PCLRR_QSPI			0x10003A
+#define MCF_GPIO_PCLRR_TIMER			0x10003B
+
 #define MCF_GPIO_PAR_AD				0x100040
+#define MCF_GPIO_PAR_BUSCTL			0x100042
+#define MCF_GPIO_PAR_BS				0x100044
 #define MCF_GPIO_PAR_CS				0x100045
 #define MCF_GPIO_PAR_SDRAM			0x100046
 #define MCF_GPIO_PAR_FECI2C			0x100047
 #define MCF_GPIO_PAR_UART			0x100048
+#define MCF_GPIO_PAR_QSPI			0x10004A
+#define MCF_GPIO_PAR_TIMER			0x10004C
+
+#define MCF_DSCR_EIM				0x100050
+#define MCF_DCSR_FEC12C 			0x100052
+#define MCF_DCSR_UART				0x100053
+#define MCF_DCSR_QSPI				0x100054
+#define MCF_DCSR_TIMER				0x100055
 
 #define MCF_CCM_CIR				0x11000A
 #define MCF_CCM_CIR_PRN_MASK			0x3F
 #define MCF_CCM_CIR_PIN_LEN			6
-#define MCF_CCM_CIR_PIN_MCF5270			0x2e
-#define MCF_CCM_CIR_PIN_MCF5271			0x80
+#define MCF_CCM_CIR_PIN_MCF5270			0x002e
+#define MCF_CCM_CIR_PIN_MCF5271			0x0032
 
 #define MCF_GPIO_AD_ADDR23			0x80
 #define MCF_GPIO_AD_ADDR22			0x40
diff --git a/include/configs/M5271EVB.h b/include/configs/M5271EVB.h
index 7ddeb55..50b3ab2 100644
--- a/include/configs/M5271EVB.h
+++ b/include/configs/M5271EVB.h
@@ -82,7 +82,10 @@
 #define CONFIG_CMD_MISC
 
 #undef CONFIG_CMD_LOADS
-#undef CONFIG_CMD_LOADB
+#define CONFIG_CMD_LOADB
+#define CONFIG_CMDLINE_EDITING	1 /* enables command line history */
+#define CONFIG_SYS_HUSH_PARSER /* Use the HUSH parser */
+#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
 
 #define CONFIG_MCFFEC
 #ifdef CONFIG_MCFFEC
@@ -116,7 +119,7 @@
 #define CONFIG_SYS_I2C_OFFSET		0x00000300
 #define CONFIG_SYS_IMMR		CONFIG_SYS_MBAR
 
-#define CONFIG_BOOTDELAY	1	/* autoboot after 5 seconds */
+#define CONFIG_BOOTDELAY	1	/* autoboot after 1 seconds */
 #define CONFIG_BOOTFILE		"u-boot.bin"
 #ifdef CONFIG_MCFFEC
 #	define CONFIG_NET_RETRY_COUNT	5
@@ -128,16 +131,16 @@
 #	define CONFIG_OVERWRITE_ETHADDR_ONCE
 #endif				/* FEC_ENET */
 
-#define CONFIG_HOSTNAME		M5235EVB
+#define CONFIG_HOSTNAME		M5271EVB
 #define CONFIG_EXTRA_ENV_SETTINGS		\
 	"netdev=eth0\0"				\
 	"loadaddr=10000\0"			\
-	"u-boot=u-boot.bin\0"			\
-	"load=tftp ${loadaddr) ${u-boot}\0"	\
+	"uboot=u-boot.bin\0"		\
+	"load=tftp $loadaddr $uboot\0"	\
 	"upd=run load; run prog\0"		\
-	"prog=prot off ffe00000 ffe2ffff;"		\
-	"era ffe00000 ffe2ffff;"				\
-	"cp.b ${loadaddr} 0 ${filesize};"	\
+	"prog=prot off ffe00000 ffe3ffff;"	\
+	"era ffe00000 ffe3ffff;"		\
+	"cp.b $loadaddr ffe00000 $filesize;"	\
 	"save\0"				\
 	""
 
@@ -159,7 +162,17 @@
 #define CONFIG_SYS_MEMTEST_END		0x380000
 
 #define CONFIG_SYS_HZ			1000000
+
+/* Clock configuration
+ * The external oscillator is a 25.000 MHz
+ * CONFIG_SYS_CLK for ColdFire V2 sets cpu_clk (not bus_clk)
+ * bus_clk = (cpu_clk/2) (fixed ratio)
+ *
+ * If CONFIG_SYS_CLK is changed. the CONFIG_SYS_MCF_SYNCR must be updated to
+ * match the new clock speed. Max cpu_clk is 150 MHz.
+ */
 #define CONFIG_SYS_CLK			100000000
+#define CONFIG_SYS_MCF_SYNCR 	(MCF_SYNCR_MFD_4X | MCF_SYNCR_RFD_DIV1)
 
 /*
  * Low Level Configuration Settings
@@ -216,7 +229,14 @@
 /* Cache Configuration */
 #define CONFIG_SYS_CACHELINE_SIZE	16
 
-/* Port configuration */
-#define CONFIG_SYS_FECI2C		0xF0
+/* Chip Select 0  : Boot Flash */
+#define CONFIG_SYS_CS0_BASE	0xFFE00000
+#define CONFIG_SYS_CS0_MASK	0x001F0001
+#define CONFIG_SYS_CS0_CTRL	0x00001980
+
+/* Chip Select 1 : External SRAM */
+#define CONFIG_SYS_CS1_BASE	0x30000000
+#define CONFIG_SYS_CS1_MASK	0x00070001
+#define CONFIG_SYS_CS1_CTRL	0x00001900
 
 #endif				/* _M5271EVB_H */