* Some Cleanup.

* Patch by Richard Woodruff, 10 Jan 2005:
  Update support for OMAP2420 (ARM11) and H4 board:
  o clean up and add new types to H4 memory probe code.
  o fix to work with internal boot.
  o added PRCM config III operation.
  o fix marginal flash timings.
  o add revison ATAG usage.
  o enable voltage scaling at power chip.
  o fix compile error for i2c.

* Fix network problem (error when receiving multiple ARP packets)

21 files changed, 595 insertions, 258 deletions

diff --git a/CHANGELOG b/CHANGELOG
index d7dd20f..3f62469 100644
--- a/CHANGELOG
+++ b/CHANGELOG
@@ -2,7 +2,19 @@
 Changes for U-Boot 1.1.3:
 ======================================================================
 
-* Patch by Daniel Poirot, 10 Oct 2004:
+* Patch by Richard Woodruff, 10 Jan 2005:
+  Update support for OMAP2420 (ARM11) and H4 board:
+  o clean up and add new types to H4 memory probe code.
+  o fix to work with internal boot.
+  o added PRCM config III operation.
+  o fix marginal flash timings.
+  o add revison ATAG usage.
+  o enable voltage scaling at power chip.
+  o fix compile error for i2c.
+
+* Fix network problem (error when receiving multiple ARP packets)
+
+* Patch by Daniel Poirot, 12 Oct 2004:
   Add support for Wind River sbc405 board
 
 * Patch by Rainer Brestan, 12 Oct 2004:
diff --git a/board/ixdp425/ixdp425.c b/board/ixdp425/ixdp425.c
index e56f477..80553ba 100644
--- a/board/ixdp425/ixdp425.c
+++ b/board/ixdp425/ixdp425.c
@@ -38,18 +38,16 @@
  * Miscelaneous platform dependent initialisations
  */
 
-int
-/**********************************************************/
-board_post_init (void)
 /**********************************************************/
+
+int board_post_init (void)
 {
 	return (0);
 }
 
-int
-/**********************************************************/
-board_init (void)
 /**********************************************************/
+
+int board_init (void)
 {
 	DECLARE_GLOBAL_DATA_PTR;
 
@@ -62,10 +60,9 @@ board_init (void)
 	return 0;
 }
 
-int
-/**********************************************************/
-dram_init (void)
 /**********************************************************/
+
+int dram_init (void)
 {
 	DECLARE_GLOBAL_DATA_PTR;
 
@@ -74,9 +71,14 @@ dram_init (void)
 
 	return (0);
 }
+
+/**********************************************************/
+
 extern struct pci_controller hose;
+
 void pci_init_board(void)
 {
+	extern void pci_ixp_init (struct pci_controller *hose);
+
 	pci_ixp_init(&hose);
-	return ;
 }
diff --git a/board/omap2420h4/config.mk b/board/omap2420h4/config.mk
index 4f14be8..f2a533e 100644
--- a/board/omap2420h4/config.mk
+++ b/board/omap2420h4/config.mk
@@ -14,12 +14,10 @@
 # (mem base + reserved)
 
 # For use with external or internal boots.
-# CONFIG_PARTIAL_SRAM must be defined to use this.
 TEXT_BASE = 0x80e80000
 
 # Used with full SRAM boot.
 # This is either with a GP system or a signed boot image.
 # easiest, and safest way to go if you can.
-# Comment out CONFIG_PARTIAL_SRAM for this one.
-#
 #TEXT_BASE = 0x40280000
+
diff --git a/board/omap2420h4/flash.c b/board/omap2420h4/flash.c
index 3b6a69f..d5e106a 100644
--- a/board/omap2420h4/flash.c
+++ b/board/omap2420h4/flash.c
@@ -119,6 +119,7 @@ unsigned long flash_init (void)
 		size += flash_info[i].size;
 	}
 
+#ifdef CFG_ENV_IS_IN_FLASH
 	/* Protect monitor and environment sectors
 	 */
 	flash_protect (FLAG_PROTECT_SET,
@@ -128,7 +129,7 @@ unsigned long flash_init (void)
 	flash_protect (FLAG_PROTECT_SET,
 				   CFG_ENV_ADDR,
 				   CFG_ENV_ADDR + CFG_ENV_SIZE - 1, &flash_info[0]);
-
+#endif
 	return size;
 }
 
diff --git a/board/omap2420h4/mem.c b/board/omap2420h4/mem.c
index 5e23d61..3ce38cc 100644
--- a/board/omap2420h4/mem.c
+++ b/board/omap2420h4/mem.c
@@ -38,9 +38,8 @@
  *************************************************************/
 void sdelay (unsigned long loops)
 {
-	__asm__ volatile ("1:\n"
-					  "subs %0, %1, #1\n"
-					  "bne 1b":"=r" (loops):"0" (loops));
+	__asm__ volatile ("1:\n" "subs %0, %1, #1\n"
+		"bne 1b":"=r" (loops):"0" (loops));
 }
 
 /*********************************************************************************
@@ -50,12 +49,10 @@ void sdelay (unsigned long loops)
 void prcm_init(void)
 {
 	u32 rev,div;
-#ifdef CONFIG_PARTIAL_SRAM
 	void (*f_lock_pll) (u32, u32, u32, u32);
 	extern void *_end_vect, *_start;
 
 	f_lock_pll = (void *)((u32)&_end_vect - (u32)&_start + SRAM_VECT_CODE);
-#endif
 
 	__raw_writel(0, CM_FCLKEN1_CORE);	   /* stop all clocks to reduce ringing */
 	__raw_writel(0, CM_FCLKEN2_CORE);	   /* may not be necessary */
@@ -75,45 +72,33 @@ void prcm_init(void)
 	__raw_writel(div, CM_CLKSEL1_CORE);/* set L3/L4/USB/Display/Vlnc/SSi dividers */
 	sdelay(1000);
 
-#ifndef CONFIG_PARTIAL_SRAM
-	/* If running fully from SRAM this is OK.  The Flash bus drops out for just a little.
-	 * but then comes back.  If running from Flash this sequence kills you, thus you need
-	 * to run it using CONFIG_PARTIAL_SRAM.
-	 */
-	__raw_writel(MODE_BYPASS_FAST, CM_CLKEN_PLL); /* go to bypass, fast relock */
-	wait_on_value(BIT0|BIT1, BIT1, CM_IDLEST_CKGEN, LDELAY); /* wait till in bypass */
-
-	/* set clock selection and dpll dividers. */
-	__raw_writel(DPLL_VAL, CM_CLKSEL1_PLL);	 /* set pll for target rate */
-	__raw_writel(COMMIT_DIVIDERS, PRCM_CLKCFG_CTRL); /* commit dividers */
-	sdelay(10000);
-	__raw_writel(DPLL_LOCK, CM_CLKEN_PLL); /* enable dpll */
-	sdelay(10000);
-	wait_on_value(BIT0|BIT1, BIT2, CM_IDLEST_CKGEN, LDELAY);  /*wait for dpll lock */
-#else
-/* if running from flash, need to jump to small relocated code area in SRAM.
- * This is the only safe spot to do configurations from.
- */
-	(*f_lock_pll)(PRCM_CLKCFG_CTRL, CM_CLKEN_PLL, DPLL_LOCK, CM_IDLEST_CKGEN);
-#endif
+	if(running_in_sram()){
+		/* If running fully from SRAM this is OK.  The Flash bus drops out for just a little.
+	 	* but then comes back.  If running from Flash this sequence kills you, thus you need
+	 	* to run it using CONFIG_PARTIAL_SRAM.
+	 	*/
+		__raw_writel(MODE_BYPASS_FAST, CM_CLKEN_PLL); /* go to bypass, fast relock */
+		wait_on_value(BIT0|BIT1, BIT0, CM_IDLEST_CKGEN, LDELAY); /* wait till in bypass */
+		sdelay(1000);
+		/* set clock selection and dpll dividers. */
+		__raw_writel(DPLL_VAL, CM_CLKSEL1_PLL);	 /* set pll for target rate */
+		__raw_writel(COMMIT_DIVIDERS, PRCM_CLKCFG_CTRL); /* commit dividers */
+		sdelay(10000);
+		__raw_writel(DPLL_LOCK, CM_CLKEN_PLL); /* enable dpll */
+		sdelay(10000);
+		wait_on_value(BIT0|BIT1, BIT1, CM_IDLEST_CKGEN, LDELAY);  /*wait for dpll lock */
+	}else if(running_in_flash()){
+		/* if running from flash, need to jump to small relocated code area in SRAM.
+		 * This is the only safe spot to do configurations from.
+		 */
+		(*f_lock_pll)(PRCM_CLKCFG_CTRL, CM_CLKEN_PLL, DPLL_LOCK, CM_IDLEST_CKGEN);
+	}
 
 	__raw_writel(DPLL_LOCK|APLL_LOCK, CM_CLKEN_PLL);   /* enable apll */
 	wait_on_value(BIT8, BIT8, CM_IDLEST_CKGEN, LDELAY);	/* wait for apll lock */
 	sdelay(1000);
 }
 
-/***********************************************
- * memif_init() - init the gpmc and sdrc
- *  - early init routines, called from flash or
- *  SRAM.
- ***********************************************/
-void memif_init(void)
-{
-	sdrc_init();
-#ifndef CONFIG_PARTIAL_SRAM  /* don't init if calling from flash */
-	gpmc_init();
-#endif
-}
 
 /********************************************************
  *  mem_ok() - test used to see if timings are correct
@@ -121,11 +106,17 @@ void memif_init(void)
  *             we are currently using.
  *******************************************************/
 u32 mem_ok(void)
-{  u32 val;
-	__raw_writel(0x0,OMAP2420_SDRC_CS0+0x400);  /* clear pos A */
-	__raw_writel(0x12345678, OMAP2420_SDRC_CS0);/* pattern to pos B */
-	val = __raw_readl(OMAP2420_SDRC_CS0+0x400); /* get pos A value */
-	if (val != 0)                               /* see if pos A value changed*/
+{
+	u32 val1, val2;
+	u32 pattern = 0x12345678;
+
+	__raw_writel(0x0,OMAP2420_SDRC_CS0+0x400);   /* clear pos A */
+	__raw_writel(pattern, OMAP2420_SDRC_CS0);    /* pattern to pos B */
+	__raw_writel(0x0,OMAP2420_SDRC_CS0+4);       /* remove pattern off the bus */
+	val1 = __raw_readl(OMAP2420_SDRC_CS0+0x400); /* get pos A value */
+	val2 = __raw_readl(OMAP2420_SDRC_CS0);       /* get val2 */
+
+	if ((val1 != 0) || (val2 != pattern))        /* see if pos A value changed*/
 		return(0);
 	else
 		return(1);
@@ -142,122 +133,157 @@ void sdrc_init(void)
 	do_sdrc_init(SDRC_CS0_OSET, EARLY_INIT);  /* only init up first bank here */
 }
 
-/**********************************************************
+/*************************************************************************
  * do_sdrc_init(): initialize the SDRAM for use.
  *  -called from low level code with stack only.
  *  -code sets up SDRAM timing and muxing for 2422 or 2420.
  *  -optimal settings can be placed here, or redone after i2c
  *      inspection of board info
  *
- * !!! When ES1 comes out need to conditionalize RFR value!!!
- **********************************************************/
+ *  This is a bit ugly, but should handle all memory moduels
+ *   used with the H4. The first time though this code from s_init()
+ *   we configure the first chip select.  Later on we come back and
+ *   will configure the 2nd chip select if it exists.
+ *
+ **************************************************************************/
 void do_sdrc_init(u32 offset, u32 early)
 {
-	u32 cpu, bug=0, rev, shared=0, cs0=0, pmask=0,first=1;
+	u32 cpu, bug=0, rev, common=0, cs0=0, pmask=0, pass_type;
 	sdrc_data_t *sdata;	 /* do not change type */
+	u32 a, b, r;
 
 	static const sdrc_data_t sdrc_2422 =
 	{
-		H4_2422_SDRC_SHARING, H4_2422_SDRC_MDCFG_0, H4_2422_SDRC_ACTIM_CTRLA_0,
-		H4_2422_SDRC_ACTIM_CTRLB_0, H4_2422_SDRC_RFR_CTRL_ES1, H4_2422_SDRC_MR_0,
-		H4_2422_SDRC_DLLA_CTRL, H4_2422_SDRC_DLLB_CTRL
+		H4_2422_SDRC_SHARING, H4_2422_SDRC_MDCFG_0_DDR, 0 , H4_2422_SDRC_ACTIM_CTRLA_0,
+		H4_2422_SDRC_ACTIM_CTRLB_0, H4_2422_SDRC_RFR_CTRL_ES1, H4_2422_SDRC_MR_0_DDR,
+		0, H4_2422_SDRC_DLLA_CTRL, H4_2422_SDRC_DLLB_CTRL
 	};
 	static const sdrc_data_t sdrc_2420 =
 	{
-		H4_2420_SDRC_SHARING, H4_2420_SDRC_MDCFG_0, H4_2420_SDRC_ACTIM_CTRLA_0,
-		H4_2420_SDRC_ACTIM_CTRLB_0, H4_2420_SDRC_RFR_CTRL_ES1, H4_2420_SDRC_MR_0,
+		H4_2420_SDRC_SHARING, H4_2420_SDRC_MDCFG_0_DDR, H4_2420_SDRC_MDCFG_0_SDR,
+		H4_2420_SDRC_ACTIM_CTRLA_0, H4_2420_SDRC_ACTIM_CTRLB_0,
+		H4_2420_SDRC_RFR_CTRL_ES1, H4_2420_SDRC_MR_0_DDR, H4_2420_SDRC_MR_0_SDR,
 		H4_2420_SDRC_DLLA_CTRL, H4_2420_SDRC_DLLB_CTRL
 	};
 
 	if (offset == SDRC_CS0_OSET)
-		cs0 = shared = 1;  /* int regs shared between both chip select */
+		cs0 = common = 1;  /* int regs shared between both chip select */
 
 	cpu = get_cpu_type();
 
-	/* warning generated, though code generation is correct. this may bite later, but is ok for now.
-	 *  there is only so much C code you can do on stack only operation.
+	/* warning generated, though code generation is correct. this may bite later,
+         * but is ok for now. there is only so much C code you can do on stack only
+         * operation.
 	 */
-	if (cpu == CPU_2422)
-		sdata = &sdrc_2422;
-	else
-		sdata = &sdrc_2420;
-	__asm__ __volatile__("": : :"memory");
-#ifdef CONFIG_PARTIAL_SRAM
-	/* u-boot is compiled to run in DDR at 8xxxxxxx.  If we use data here which is not pc relative
-	 * we need to get the address correct.  We need to find the current flash mapping to dress up
-	 * the initial pointer load.  As long as this is const data we should be ok.
-	 */
-	if(early)
-		sdata = (sdrc_data_t *)(((u32)sdata & 0x0003FFFF) | get_gpmc0_base());
-#endif
+	if (cpu == CPU_2422){
+		sdata = (sdrc_data_t *)&sdrc_2422;
+		pass_type = STACKED;
+	}
+	else{
+		sdata = (sdrc_data_t *)&sdrc_2420;
+		pass_type = IP_DDR;
+	}
 
-	men_combo:
+	__asm__ __volatile__("": : :"memory");  /* limit compiler scope */
 
-	if (!early && get_mem_type() == DDR_COMBO) { /* combo part has a shared CKE signal, can't use feature */
+	/* u-boot is compiled to run in DDR or SRAM at 8xxxxxxx or 4xxxxxxx.
+         * If we are running in flash prior to relocation and we use data
+         * here which is not pc relative we need to get the address correct.
+         * We need to find the current flash mapping to dress up the initial
+         * pointer load.  As long as this is const data we should be ok.
+	 */
+	if((early) && running_in_flash()){
+		sdata = (sdrc_data_t *)(((u32)sdata & 0x0003FFFF) | get_gpmc0_base());
+		/* NOR internal boot offset is 0x4000 from xloader signature */
+		if(running_from_internal_boot())
+			sdata = (sdrc_data_t *)((u32)sdata + 0x4000);
+	}
+	if (!early && (get_mem_type() == DDR_COMBO)) {/* combo part has a shared CKE signal, can't use feature */
 		pmask = BIT2;
-		first = 0;	/* trigger ddr_combo init */
+		pass_type = COMBO_DDR; /* CS1 config */
 	}
 
-	if (shared) {
-		__raw_writel(__raw_readl(SMS_SYSCONFIG)|SMART_IDLE, SMS_SYSCONFIG);
-		__raw_writel(SMART_IDLE|SOFTRESET, SDRC_SYSCONFIG);	/* reset sdrc */
-		wait_on_value(BIT0, BIT0, SDRC_STATUS, 12000000);	/* wait till reset done set */
-		__raw_writel(SMART_IDLE, SDRC_SYSCONFIG);		/* clear soft reset */
+next_mem_type:
+	if (common) {	/* do a SDRC reset between types to clear regs*/
+		__raw_writel(SOFTRESET, SDRC_SYSCONFIG);	/* reset sdrc */
+		wait_on_value(BIT0, BIT0, SDRC_STATUS, 12000000);/* wait till reset done set */
+		__raw_writel(0, SDRC_SYSCONFIG);		/* clear soft reset */
 		__raw_writel(sdata->sdrc_sharing, SDRC_SHARING);
-		__raw_writel((__raw_readl(SDRC_POWER)|SMART_IDLE) & ~pmask, SDRC_POWER);
+		__raw_writel((__raw_readl(SDRC_POWER)) & ~pmask, SDRC_POWER);
+#ifdef POWER_SAVE
+		__raw_writel(__raw_readl(SMS_SYSCONFIG)|SMART_IDLE, SMS_SYSCONFIG);
+		__raw_writel(sdata->sdrc_sharing|SMART_IDLE, SDRC_SHARING);
+		__raw_writel((__raw_readl(SDRC_POWER)|BIT6) & ~pmask, SDRC_POWER);
+#endif
+	}
+
+	if ((pass_type == IP_DDR) || (pass_type == STACKED)) /* (IP ddr-CS0),(2422-CS0/CS1) */
+		__raw_writel(sdata->sdrc_mdcfg_0_ddr, SDRC_MCFG_0+offset);
+	else if (pass_type == COMBO_DDR){ /* (combo-CS0/CS1) */
+		__raw_writel(H4_2420_COMBO_MDCFG_0_DDR,SDRC_MCFG_0+offset);
+	} else if (pass_type == IP_SDR){ /* ip sdr-CS0 */
+		__raw_writel(sdata->sdrc_mdcfg_0_sdr, SDRC_MCFG_0+offset);
 	}
-	if (first)
-		__raw_writel(sdata->sdrc_mdcfg_0, SDRC_MCFG_0+offset);
-	else {
-		__raw_writel((__raw_readl(SDRC_POWER)|SMART_IDLE) & ~pmask, SDRC_POWER);
-		__raw_writel(H4_2420_COMBO_MDCFG_0,SDRC_MCFG_0+offset);
+
+	if(pass_type == IP_SDR){  /* SDRAM can run full speed only rated for 105MHz*/
+		a = H4_242X_SDRC_ACTIM_CTRLA_0_100MHz;
+		b = H4_242X_SDRC_ACTIM_CTRLB_0_100MHz;
+		r = H4_2420_SDRC_RFR_CTRL;
+	} else {
+		a = sdata->sdrc_actim_ctrla_0;
+		b = sdata->sdrc_actim_ctrlb_0;
+		r = sdata->sdrc_rfr_ctrl;
 	}
 
 	if (cs0) {
-		__raw_writel(sdata->sdrc_actim_ctrla_0, SDRC_ACTIM_CTRLA_0);
-		__raw_writel(sdata->sdrc_actim_ctrlb_0, SDRC_ACTIM_CTRLB_0);
+		__raw_writel(a, SDRC_ACTIM_CTRLA_0);
+		__raw_writel(b, SDRC_ACTIM_CTRLB_0);
 	} else {
-		__raw_writel(sdata->sdrc_actim_ctrla_0, SDRC_ACTIM_CTRLA_1);
-		__raw_writel(sdata->sdrc_actim_ctrlb_0, SDRC_ACTIM_CTRLB_1);
+		__raw_writel(a, SDRC_ACTIM_CTRLA_1);
+		__raw_writel(b, SDRC_ACTIM_CTRLB_1);
 	}
 
-	__raw_writel(sdata->sdrc_rfr_ctrl, SDRC_RFR_CTRL+offset);
+	__raw_writel(r, SDRC_RFR_CTRL+offset);
 
-	/* init sequence for _mDDR_ using manual commands (DDR is a bit different) */
+	/* init sequence for mDDR/mSDR using manual commands (DDR is a bit different) */
 	__raw_writel(CMD_NOP, SDRC_MANUAL_0+offset);
-	sdelay(5000);  /* susposed to be 100us per design spec for mddr*/
+	sdelay(5000);  /* susposed to be 100us per design spec for mddr/msdr */
 	__raw_writel(CMD_PRECHARGE, SDRC_MANUAL_0+offset);
 	__raw_writel(CMD_AUTOREFRESH, SDRC_MANUAL_0+offset);
 	__raw_writel(CMD_AUTOREFRESH, SDRC_MANUAL_0+offset);
 
 	/*
 	 * CSx SDRC Mode Register
-	 * Burst length = 4 - DDR memory
+	 * Burst length = (4 - DDR) (2-SDR)
 	 * Serial mode
 	 * CAS latency = x
 	 */
-	__raw_writel(sdata->sdrc_mr_0, SDRC_MR_0+offset);
+	if(pass_type == IP_SDR)
+		__raw_writel(sdata->sdrc_mr_0_sdr, SDRC_MR_0+offset);
+	else
+		__raw_writel(sdata->sdrc_mr_0_ddr, SDRC_MR_0+offset);
 
-	/* NOTE: ES1 242x _BUG_ DLL */
+	/* NOTE: ES1 242x _BUG_ DLL + External Bandwidth fix*/
 	rev  = get_cpu_rev();
-	if (rev == CPU_2420_ES1 || rev ==  CPU_2422_ES1)
+	if (rev == CPU_2420_ES1 || rev ==  CPU_2422_ES1){
 		bug = BIT0;
+		__raw_writel((__raw_readl(SMS_CLASS_ARB0)|BURSTCOMPLETE_GROUP7)
+			,SMS_CLASS_ARB0);/* enable bust complete for lcd */
+	}
 	/* enable & load up DLL with good value for 75MHz, and set phase to 90% */
-	if (shared) {
+	if (common && (pass_type != IP_SDR)) {
 		__raw_writel(sdata->sdrc_dlla_ctrl, SDRC_DLLA_CTRL);
 		__raw_writel(sdata->sdrc_dlla_ctrl & ~(BIT2|bug), SDRC_DLLA_CTRL);
 		__raw_writel(sdata->sdrc_dllb_ctrl, SDRC_DLLB_CTRL);
 		__raw_writel(sdata->sdrc_dllb_ctrl & ~(BIT2|bug) , SDRC_DLLB_CTRL);
 	}
-	sdelay(9000);
-	if (!first || mem_ok())	/* passed test or 2nd bank init */
-		return;
-	else {
-		first = 0;
-		goto men_combo;
-	}
-}
+	sdelay(90000);
 
+	if(mem_ok())
+		return; /* STACKED, other configued type */
+	++pass_type; /* IPDDR->COMBODDR->IPSDR for CS0 */
+	goto next_mem_type;
+}
 
 /*****************************************************
  * gpmc_init(): init gpmc bus
@@ -272,7 +298,11 @@ void gpmc_init(void)
 	__raw_writel(0x10, GPMC_SYSCONFIG);	/* smart idle */
 	__raw_writel(0x0, GPMC_IRQENABLE);	/* isr's sources masked */
 	__raw_writel(0x1, GPMC_TIMEOUT_CONTROL);/* timeout disable */
+#ifdef CFG_NAND_BOOT
+	__raw_writel(0x001, GPMC_CONFIG);	/* set nWP, disable limited addr */
+#else
 	__raw_writel(0x111, GPMC_CONFIG);	/* set nWP, disable limited addr */
+#endif
 
 	/* discover bus connection from sysboot */
 	if (is_gpmc_muxed() == GPMC_MUXED)
@@ -283,11 +313,22 @@ void gpmc_init(void)
 	/* setup cs0 */
 	__raw_writel(0x0, GPMC_CONFIG7_0);	/* disable current map */
 	sdelay(1000);
+
+#ifdef CFG_NAND_BOOT
+	__raw_writel(H4_24XX_GPMC_CONFIG1_0|mtype|mwidth, GPMC_CONFIG1_0);
+#else
 	__raw_writel(H4_24XX_GPMC_CONFIG1_0|mux|mtype|mwidth, GPMC_CONFIG1_0);
-	/* __raw_writel(H4_24XX_GPMC_CONFIG2_0, GPMC_CONFIG2_0); */
+#endif
+
+#ifdef PRCM_CONFIG_III
+	__raw_writel(H4_24XX_GPMC_CONFIG2_0, GPMC_CONFIG2_0);
+#endif
 	__raw_writel(H4_24XX_GPMC_CONFIG3_0, GPMC_CONFIG3_0);
 	__raw_writel(H4_24XX_GPMC_CONFIG4_0, GPMC_CONFIG4_0);
-	/* __raw_writel(H4_24XX_GPMC_CONFIG5_0, GPMC_CONFIG5_0); */
+#ifdef PRCM_CONFIG_III
+	__raw_writel(H4_24XX_GPMC_CONFIG5_0, GPMC_CONFIG5_0);
+	__raw_writel(H4_24XX_GPMC_CONFIG6_0, GPMC_CONFIG6_0);
+#endif
 	__raw_writel(H4_24XX_GPMC_CONFIG7_0, GPMC_CONFIG7_0);/* enable new mapping */
 	sdelay(2000);
 
@@ -303,3 +344,4 @@ void gpmc_init(void)
 	__raw_writel(H4_24XX_GPMC_CONFIG7_1, GPMC_CONFIG7_1); /* enable mapping */
 	sdelay(2000);
 }
+
diff --git a/board/omap2420h4/omap2420h4.c b/board/omap2420h4/omap2420h4.c
index bf398f6..697dfef 100644
--- a/board/omap2420h4/omap2420h4.c
+++ b/board/omap2420h4/omap2420h4.c
@@ -31,6 +31,11 @@
 #include <asm/arch/mem.h>
 #include <i2c.h>
 #include <asm/mach-types.h>
+#if (CONFIG_COMMANDS & CFG_CMD_NAND)
+#include <linux/mtd/nand.h>
+extern struct nand_chip nand_dev_desc[CFG_MAX_NAND_DEVICE];
+#endif
+
 
 static void wait_for_command_complete(unsigned int wd_base);
 
@@ -40,9 +45,8 @@ static void wait_for_command_complete(unsigned int wd_base);
  ******************************************************/
 static inline void delay (unsigned long loops)
 {
-	__asm__ volatile ("1:\n"
-					  "subs %0, %1, #1\n"
-					  "bne 1b":"=r" (loops):"0" (loops));
+	__asm__ volatile ("1:\n" "subs %0, %1, #1\n"
+		"bne 1b":"=r" (loops):"0" (loops));
 }
 
 /*****************************************
@@ -52,11 +56,9 @@ static inline void delay (unsigned long loops)
 int board_init (void)
 {
 	DECLARE_GLOBAL_DATA_PTR;
-#ifndef CONFIG_PARTIAL_SRAM
-	s_init(0x0);  /* full sram build, never skip clock and sdrc, no point */
-#else
-	gpmc_init();
-#endif
+
+	gpmc_init(); /* in SRAM or SDRM, finish GPMC */
+
 	gd->bd->bi_arch_number = MACH_TYPE_OMAP_H4;		/* board id for linux */
 	gd->bd->bi_boot_params = (OMAP2420_SDRC_CS0+0x100);	/* adress of boot parameters */
 
@@ -66,23 +68,23 @@ int board_init (void)
 /**********************************************************
  * Routine: s_init
  * Description: Does early system init of muxing and clocks.
- * - Called at time when only stack is available.
+ * - Called path is with sram stack.
  **********************************************************/
-void s_init(int skip)
+void s_init(void)
 {
+	int in_sdram = running_in_sdram();
+
 	watchdog_init();
 	set_muxconf_regs();
 	delay(100);
 
-	if (!skip)
+	if(!in_sdram)
 		prcm_init();
 
 	peripheral_enable();
 	icache_enable();
-#ifndef CONFIG_APTIX
-	if (!skip)
-		memif_init();
-#endif
+	if (!in_sdram)
+		sdrc_init();
 }
 
 /*******************************************************
@@ -102,7 +104,7 @@ int misc_init_r (void)
 void watchdog_init(void)
 {
 	int mode;
-#define GP (BIT8|BIT9)
+	#define GP (BIT8|BIT9)
 
 	/* There are 4 watch dogs.  1 secure, and 3 general purpose.
 	 * I would expect that the ROM takes care of the secure one,
@@ -152,6 +154,8 @@ void ether_init (void)
 #ifdef CONFIG_DRIVER_LAN91C96
 	int cnt = 20;
 
+	__raw_writeb(0x3,OMAP2420_CTRL_BASE+0x10a); /*protect->gpio95 */
+
 	__raw_writew(0x0, LAN_RESET_REGISTER);
 	do {
 		__raw_writew(0x1, LAN_RESET_REGISTER);
@@ -189,7 +193,9 @@ int dram_init (void)
 	DECLARE_GLOBAL_DATA_PTR;
 	unsigned int size0=0,size1=0;
 	u32 mtype, btype;
-#define NOT_EARLY 0
+	u8 chg_on = 0x5; /* enable charge of back up battery */
+	u8 vmode_on = 0x8C;
+	#define NOT_EARLY 0
 
 	i2c_init (CFG_I2C_SPEED, CFG_I2C_SLAVE); /* need this a bit early */
 
@@ -197,13 +203,18 @@ int dram_init (void)
 	mtype = get_mem_type();
 
 	display_board_info(btype);
-	if (btype == BOARD_H4_MENELAUS)
-		update_mux(btype,mtype);
+	if (btype == BOARD_H4_MENELAUS){
+		update_mux(btype,mtype); /* combo part on menelaus */
+		i2c_write(I2C_MENELAUS, 0x20, 1, &chg_on, 1); /*fix POR reset bug */
+		i2c_write(I2C_MENELAUS, 0x2, 1, &vmode_on, 1); /* VCORE change on VMODE */
+	}
 
 	if ((mtype == DDR_COMBO) || (mtype == DDR_STACKED)) {
 		do_sdrc_init(SDRC_CS1_OSET, NOT_EARLY);	/* init other chip select */
 		size0 = size1 = SZ_32M;
-	} else
+	} else if (mtype == SDR_DISCRETE)
+		size0 = SZ_128M;
+	else
 		size0 = SZ_64M;
 
 	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
@@ -477,7 +488,7 @@ void muxSetupCamera(void)
 	/* CAMERA_RSTZ  pin configuration, PIN = Y16 */
 	/* CAM_RST is connected through the I2C IO expander.*/
 	/* MuxConfigReg = (volatile unsigned char *), CONTROL_PADCONF_SYS_NRESWARM*/
-	/* *MuxConfigReg = 0x00 ; /* Mode = 0, PUPD=Disabled   */
+	/* *MuxConfigReg = 0x00 ; / * Mode = 0, PUPD=Disabled   */
 
 	/* CAMERA_XCLK  pin configuration, PIN = U3 */
 	MuxConfigReg = (volatile unsigned char *)CONTROL_PADCONF_CAM_XCLK;
@@ -661,7 +672,7 @@ void muxSetupHDQ(void)
 void muxSetupGPMC(void)
 {
 	volatile uint8 *MuxConfigReg;
-	volatile unsigned int *MCR = 0x4800008C;
+	volatile unsigned int *MCR = (volatile unsigned int *)0x4800008C;
 
 	/* gpmc_io_dir */
 	*MCR = 0x19000000;
@@ -830,3 +841,25 @@ void update_mux(u32 btype,u32 mtype)
 		}
 	}
 }
+
+#if (CONFIG_COMMANDS & CFG_CMD_NAND)
+void nand_init(void)
+{
+    extern flash_info_t flash_info[];
+
+    nand_probe(CFG_NAND_ADDR);
+    if (nand_dev_desc[0].ChipID != NAND_ChipID_UNKNOWN) {
+		print_size(nand_dev_desc[0].totlen, "\n");
+    }
+
+#ifdef CFG_JFFS2_MEM_NAND
+    flash_info[CFG_JFFS2_FIRST_BANK].flash_id = nand_dev_desc[0].id;
+    flash_info[CFG_JFFS2_FIRST_BANK].size = 1024*1024*2;      /* only read kernel single meg partition */
+	flash_info[CFG_JFFS2_FIRST_BANK].sector_count = 1024;   /* 1024 blocks in 16meg chip (use less for raw/copied partition) */
+    flash_info[CFG_JFFS2_FIRST_BANK].start[0] = 0x80200000; /* ?, ram for now, open question, copy to RAM or adapt for NAND */
+#endif
+}
+#endif
+
+
+
diff --git a/board/omap2420h4/platform.S b/board/omap2420h4/platform.S
index dc1b443..86bf5ba 100644
--- a/board/omap2420h4/platform.S
+++ b/board/omap2420h4/platform.S
@@ -33,8 +33,6 @@
 _TEXT_BASE:
 	.word	TEXT_BASE	/* sdram load addr from config.mk */
 
-#ifdef CONFIG_PARTIAL_SRAM
-
 /**************************************************************************
  * cpy_clk_code: relocates clock code into SRAM where its safer to execute
  * R1 = SRAM destination address.
@@ -159,41 +157,16 @@ pll_div_add:
     .word CM_CLKSEL1_PLL
 pll_div_val:
     .word DPLL_VAL	/* DPLL setting (300MHz default) */
-#endif
 
 .globl platformsetup
 platformsetup:
-	mov r3, r0     /* save skip information */
-#ifdef CONFIG_APTIX
-	ldr	r0,	REG_SDRC_MCFG_0
-	ldr	r1,	VAL_SDRC_MCFG_0
-	str	r1,	[r0]
-	ldr	r0,	REG_SDRC_MR_0
-	ldr	r1,	VAL_SDRC_MR_0
-	str	r1,	[r0]
-	/* a ddr needs emr1 set here */
-	ldr	r0,	REG_SDRC_SHARING
-	ldr	r1,	VAL_SDRC_SHARING
-	str	r1,	[r0]
-	ldr	r0,	REG_SDRC_RFR_CTRL_0
-	ldr	r1,	VAL_SDRC_RFR_CTRL_0
-	str	r1,	[r0]
-
-       /* little delay after init */
-       mov r2, #0x1800
-1:
-	subs r2, r2, #0x1
-	bne 1b
-#endif
-#ifdef CONFIG_PARTIAL_SRAM
 	ldr	sp,	SRAM_STACK
 	str	ip,	[sp]	/* stash old link register */
 	mov	ip,	lr	/* save link reg across call */
-	mov	r0,	r3	/* pass skip info to s_init */
 	bl	s_init		/* go setup pll,mux,memory */
 	ldr	ip,	[sp]	/* restore save ip */
 	mov	lr,	ip	/* restore link reg */
-#endif
+
 	/* map interrupt controller */
 	ldr	r0,	VAL_INTH_SETUP
 	mcr	p15, 0, r0, c15, c2, 4
@@ -211,21 +184,3 @@ VAL_INTH_SETUP:
 SRAM_STACK:
 	.word LOW_LEVEL_SRAM_STACK
 
-#ifdef CONFIG_APTIX
-REG_SDRC_SHARING:
-	.word SDRC_SHARING
-REG_SDRC_MCFG_0:
-	.word SDRC_MCFG_0
-REG_SDRC_MR_0:
-	.word SDRC_MR_0
-REG_SDRC_RFR_CTRL_0:
-	.word SDRC_RFR_CTRL
-VAL_SDRC_SHARING:
-	.word VAL_H4_SDRC_SHARING
-VAL_SDRC_MCFG_0:
-	.word VAL_H4_SDRC_MCFG_0
-VAL_SDRC_MR_0:
-	.word VAL_H4_SDRC_MR_0
-VAL_SDRC_RFR_CTRL_0:
-	.word VAL_H4_SDRC_RFR_CTRL_0
-#endif
diff --git a/board/omap2420h4/sys_info.c b/board/omap2420h4/sys_info.c
index b5fe9e3..78b936c 100644
--- a/board/omap2420h4/sys_info.c
+++ b/board/omap2420h4/sys_info.c
@@ -70,13 +70,21 @@ u32 get_cpu_rev(void)
  *************************************************************/
 u32 get_mem_type(void)
 {
+	volatile u32 *burst = (volatile u32 *)(SDRC_MR_0+SDRC_CS0_OSET);
+
 	if (get_cpu_type() == CPU_2422)
 		return(DDR_STACKED);
 
 	if (get_board_type() == BOARD_H4_MENELAUS)
-		return(DDR_COMBO);
+		if(*burst == H4_2420_SDRC_MR_0_SDR)
+			return(SDR_DISCRETE);
+		else
+			return(DDR_COMBO);
 	else
-		return(DDR_DISCRETE);
+		if(*burst == H4_2420_SDRC_MR_0_SDR) /* SDP + SDR kit */
+			return(SDR_DISCRETE);
+		else
+			return(DDR_DISCRETE); /* origional SDP */
 }
 
 /***********************************************************************
@@ -129,6 +137,8 @@ u32 is_gpmc_muxed(void)
 {
 	u32 mux;
 	mux = get_sysboot_value();
+	if ((mux & (BIT0 | BIT1 | BIT2 | BIT3)) == (BIT0 | BIT2 | BIT3))
+		return(GPMC_MUXED); /* NAND Boot mode */
 	if (mux & BIT1)	   /* if mux'ed */
 		return(GPMC_MUXED);
 	else
@@ -200,3 +210,96 @@ void display_board_info(u32 btype)
 		db_s = db_ip;
 	printf("TI H4 SDP Base Board with OMAP%s %s Daughter Board\n",cpu_s, db_s);
 }
+
+/*************************************************************************
+ * get_board_rev() - setup to pass kernel board revision information
+ *          0 = 242x IP platform (first 2xx boards)
+ *          1 = 242x Menelaus platfrom.
+ *************************************************************************/
+u32 get_board_rev(void)
+{
+	u32 rev = 0;
+	u32 btype = get_board_type();
+
+	if (btype == BOARD_H4_MENELAUS){
+		rev = 1;
+	}
+	return(rev);
+}
+
+/********************************************************
+ *  get_base(); get upper addr of current execution
+ *******************************************************/
+static u32 get_base(void)
+{
+	u32  val;
+	__asm__ __volatile__("mov %0, pc \n" : "=r" (val) : : "memory");
+	val &= 0xF0000000;
+	val >>= 28;
+	return(val);
+}
+
+/********************************************************
+ *  get_base2(); get 2upper addr of current execution
+ *******************************************************/
+static u32 get_base2(void)
+{
+	u32  val;
+	__asm__ __volatile__("mov %0, pc \n" : "=r" (val) : : "memory");
+	val &= 0xFF000000;
+	val >>= 24;
+	return(val);
+}
+
+
+
+/********************************************************
+ *  running_in_flash() - tell if currently running in
+ *   flash.
+ *******************************************************/
+u32 running_in_flash(void)
+{
+	if (get_base() < 4)
+		return(1);  /* in flash */
+	return(0); /* running in SRAM or SDRAM */
+}
+
+/********************************************************
+ *  running_in_sram() - tell if currently running in
+ *   sram.
+ *******************************************************/
+u32 running_in_sram(void)
+{
+	if (get_base() == 4)
+		return(1);  /* in SRAM */
+	return(0); /* running in FLASH or SDRAM */
+}
+/********************************************************
+ *  running_in_sdram() - tell if currently running in
+ *   flash.
+ *******************************************************/
+u32 running_in_sdram(void)
+{
+	if (get_base() > 4)
+		return(1);  /* in sdram */
+	return(0); /* running in SRAM or FLASH */
+}
+
+/*************************************************************
+ *  running_from_internal_boot() - am I a signed NOR image.
+ *************************************************************/
+u32 running_from_internal_boot(void)
+{
+	u32 v, base;
+
+	v = get_sysboot_value() & BIT3;
+	base = get_base2();
+	/* if running at mask rom flash address and
+	 * sysboot3 says this was an internal boot
+	 */
+	if ((base == 0x08) && v)
+		return(1);
+	else
+		return(0);
+}
+
diff --git a/cpu/arm1136/config.mk b/cpu/arm1136/config.mk
index 077514a..ca9dc25 100644
--- a/cpu/arm1136/config.mk
+++ b/cpu/arm1136/config.mk
@@ -22,4 +22,5 @@
 #
 PLATFORM_RELFLAGS += -fno-strict-aliasing  -fno-common -ffixed-r8 \
 
-PLATFORM_CPPFLAGS += -mapcs-32 -march=armv6
+# Make ARMv5 to allow more compilers to work, even though its v6.
+PLATFORM_CPPFLAGS += -mapcs-32 -march=armv5
diff --git a/cpu/arm1136/start.S b/cpu/arm1136/start.S
index 8cacc16..27fcc89 100644
--- a/cpu/arm1136/start.S
+++ b/cpu/arm1136/start.S
@@ -113,6 +113,7 @@ reset:
 #ifdef CONFIG_OMAP2420H4
        /* Copy vectors to mask ROM indirect addr */
 	adr	r0, _start		/* r0 <- current position of code   */
+ 		add     r0, r0, #4				/* skip reset vector			*/
 	mov	r2, #64			/* r2 <- size to copy  */
 	add	r2, r0, r2		/* r2 <- source end address	    */
 	mov	r1, #SRAM_OFFSET0	  /* build vect addr */
@@ -125,10 +126,8 @@ next:
 	stmia	r1!, {r3-r10}		/* copy to   target address [r1]    */
 	cmp	r0, r2			/* until source end address [r2]    */
 	bne	next			/* loop until equal */
-#ifdef CONFIG_PARTIAL_SRAM
 	bl	cpy_clk_code		/* put dpll adjust code behind vectors */
 #endif
-#endif
 	/* the mask ROM code should have PLL and others stable */
 	bl  cpu_init_crit
 
@@ -199,20 +198,13 @@ cpu_init_crit:
 	bic	r0, r0, #0x00002300	@ clear bits 13, 9:8 (--V- --RS)
 	bic	r0, r0, #0x00000087	@ clear bits 7, 2:0 (B--- -CAM)
 	orr	r0, r0, #0x00000002	@ set bit 2 (A) Align
-#ifndef CONFIG_ICACHE_OFF
 	orr	r0, r0, #0x00001000	@ set bit 12 (I) I-Cache
-#endif
 	mcr	p15, 0, r0, c1, c0, 0
 
 	/*
 	 * Jump to board specific initialization... The Mask ROM will have already initialized
 	 * basic memory.  Go here to bump up clock rate and handle wake up conditions.
 	 */
-	adr	r0, _start		/* r0 <- current position of code   */
-	ldr	r1, _TEXT_BASE		/* test if we run from flash or RAM */
-	cmp	r0, r1			/* pass on info about skipping some init portions */
-	moveq	r0,#0x1			/* flag to skip prcm and sdrc setup */
-	movne	r0,#0x0
 	mov	ip, lr		/* persevere link reg across call */
 	bl	platformsetup	/* go setup pll,mux,memory */
 	mov	lr, ip		/* restore link */
@@ -405,7 +397,7 @@ arm1136_cache_flush:
 .globl reset_cpu
 reset_cpu:
 	ldr	r1, rstctl	/* get addr for global reset reg */
-	mov	r3, #0x3	/* full reset pll+mpu */
+	mov	r3, #0x2	/* full reset pll+mpu */
 	str	r3, [r1]	/* force reset */
 	mov	r0, r0
 _loop_forever:
diff --git a/cpu/ixp/pci.c b/cpu/ixp/pci.c
index 703be4a..33c1cff 100644
--- a/cpu/ixp/pci.c
+++ b/cpu/ixp/pci.c
@@ -68,27 +68,30 @@ PciBar *memBars[IXP425_PCI_MAX_BAR];
 PciBar *ioBars[IXP425_PCI_MAX_BAR];
 PciDevice devices[IXP425_PCI_MAX_FUNC_ON_BUS];
 
-extern void out_8 (volatile unsigned *addr, char val)
+void out_8 (volatile unsigned *addr, char val)
 {
 	*addr = val;
 }
-extern void out_le16 (volatile unsigned *addr, unsigned short val)
+
+void out_le16 (volatile unsigned *addr, unsigned short val)
 {
 	*addr = cpu_to_le16 (val);
 }
-extern void out_le32 (volatile unsigned *addr, unsigned int val)
+
+void out_le32 (volatile unsigned *addr, unsigned int val)
 {
 	*addr = cpu_to_le32 (val);
 }
 
-extern unsigned char in_8 (volatile unsigned *addr)
+unsigned char in_8 (volatile unsigned *addr)
 {
 	unsigned char val;
 
 	val = *addr;
 	return val;
 }
-extern unsigned short in_le16 (volatile unsigned *addr)
+
+unsigned short in_le16 (volatile unsigned *addr)
 {
 	unsigned short val;
 
@@ -96,7 +99,8 @@ extern unsigned short in_le16 (volatile unsigned *addr)
 	val = le16_to_cpu (val);
 	return val;
 }
-extern unsigned in_le32 (volatile unsigned *addr)
+
+unsigned in_le32 (volatile unsigned *addr)
 {
 	unsigned int val;
 
@@ -552,10 +556,9 @@ void sys_pci_device_bars_write (void)
 		pci_write_config_dword (devices[i].device,
 					PCI_CFG_BASE_ADDRESS_0,
 					devices[i].bar[0].address);
-		addr = BIT (31 -
-			    devices[i].
-			    device) | (0 << PCI_NP_AD_FUNCSL) |
-			(PCI_CFG_BASE_ADDRESS_0) & ~3;
+		addr = (BIT (31 - devices[i].device) |
+			(0 << PCI_NP_AD_FUNCSL) |
+			(PCI_CFG_BASE_ADDRESS_0) ) & ~3;
 		pci_write_config_dword (devices[i].device,
 					PCI_CFG_DEV_INT_LINE, devices[i].irq);
 
diff --git a/drivers/omap24xx_i2c.c b/drivers/omap24xx_i2c.c
index b64e713..383dfcb 100644
--- a/drivers/omap24xx_i2c.c
+++ b/drivers/omap24xx_i2c.c
@@ -21,14 +21,15 @@
  */
 
 #include <common.h>
+
+#ifdef CONFIG_DRIVER_OMAP24XX_I2C
+
 #include <asm/arch/i2c.h>
 #include <asm/io.h>
 
 #define inw(a) __raw_readw(a)
 #define outw(a,v) __raw_writew(a,v)
 
-#ifdef CONFIG_DRIVER_OMAP24XX_I2C
-
 static void wait_for_bb (void);
 static u16 wait_for_pin (void);
 void flush_fifo(void);
diff --git a/drivers/pci_indirect.c b/drivers/pci_indirect.c
index 0368681..584a4fc 100644
--- a/drivers/pci_indirect.c
+++ b/drivers/pci_indirect.c
@@ -21,6 +21,15 @@
 #define cfg_read(val, addr, type, op)	*val = op((type)(addr))
 #define cfg_write(val, addr, type, op)	op((type *)(addr), (val))
 
+#ifdef CONFIG_IXP425
+extern unsigned char	in_8 (volatile unsigned *addr);
+extern unsigned short	in_le16 (volatile unsigned *addr);
+extern unsigned		in_le32 (volatile unsigned *addr);
+extern void		out_8 (volatile unsigned *addr, char val);
+extern void		out_le16 (volatile unsigned *addr, unsigned short val);
+extern void		out_le32 (volatile unsigned *addr, unsigned int val);
+#endif	/* CONFIG_IXP425 */
+
 #if defined(CONFIG_MPC8260)
 #define INDIRECT_PCI_OP(rw, size, type, op, mask)			 \
 static int								 \
diff --git a/include/asm-arm/arch-arm1136/clocks.h b/include/asm-arm/arch-arm1136/clocks.h
index 9a88e85..bd1b088 100644
--- a/include/asm-arm/arch-arm1136/clocks.h
+++ b/include/asm-arm/arch-arm1136/clocks.h
@@ -61,15 +61,53 @@
 #define II_BUS_DIV_ES1   0x04601026
 #define II_DPLL_300      0x01832100
 
+/****************************************************************************;
+; PRCM Scheme III
+;
+; Enable clocks and DPLL for:
+;  DPLL=266, 	DPLLout=532   	M=5+1,N=133 CM_CLKSEL1_PLL[21:8]  12/6*133=266
+;  Core=532  	(core domain)   DPLLx2      CM_CLKSEL2_PLL[1:0]
+;  MPUF=266   	(mpu domain)    /2          CM_CLKSEL_MPU[4:0]
+;  DSPF=177.3     (dsp domain)  /3          CM_CLKSEL_DSP[4:0]
+;  DSPI=88.67                   /6          CM_CLKSEL_DSP[6:5]
+;  DSP_S         ACTIVATED	            CM_CLKSEL_DSP[7]
+;  IVAF=88.67    (dsp domain)   /3          CM_CLKSEL_DSP[12:8]
+;  IVAF=88.67        auto
+;  IVAI            auto
+;  IVA_MPU         auto
+;  IVA_S         ACTIVATED                  CM_CLKSEL_DSP[13]
+;  GFXF=66.5      (gfx domain)	/8          CM_CLKSEL_FGX[2:0]:
+;  SSI_SSRF=177.3               /3          CM_CLKSEL1_CORE[24:20]
+;  SSI_SSTF=88.67     auto
+;  L3=133Mhz (sdram)            /4          CM_CLKSEL1_CORE[4:0]
+;  L4=66.5Mhz                   /8
+;  C_L4_USB=33.25               /16         CM_CLKSEL1_CORE[6:5]
+***************************************************************************/
+#define III_DPLL_OUT_X2   0x2    /* x2 core out */
+#define III_MPU_DIV       0x2    /* mpu = core/2 */
+#define III_DSP_DIV       0x23C3 /* dsp & iva divider sych enabled*/
+#define III_GFX_DIV       0x2
+#define III_BUS_DIV       0x08300c44
+#define III_BUS_DIV_ES1   0x08301044
+#define III_DPLL_266      0x01885500
+
 /* set defaults for boot up */
 #ifdef PRCM_CONFIG_II
-#define DPLL_OUT         II_DPLL_OUT_X2
-#define MPU_DIV          II_MPU_DIV
-#define DSP_DIV          II_DSP_DIV
-#define GFX_DIV          II_GFX_DIV
-#define BUS_DIV          II_BUS_DIV
-#define BUS_DIV_ES1      II_BUS_DIV_ES1
-#define DPLL_VAL         II_DPLL_300
+# define DPLL_OUT         II_DPLL_OUT_X2
+# define MPU_DIV          II_MPU_DIV
+# define DSP_DIV          II_DSP_DIV
+# define GFX_DIV          II_GFX_DIV
+# define BUS_DIV          II_BUS_DIV
+# define BUS_DIV_ES1      II_BUS_DIV_ES1
+# define DPLL_VAL         II_DPLL_300
+#elif PRCM_CONFIG_III
+# define DPLL_OUT         III_DPLL_OUT_X2
+# define MPU_DIV          III_MPU_DIV
+# define DSP_DIV          III_DSP_DIV
+# define GFX_DIV          III_GFX_DIV
+# define BUS_DIV          III_BUS_DIV
+# define BUS_DIV_ES1      III_BUS_DIV_ES1
+# define DPLL_VAL         III_DPLL_266
 #endif
 
 /* lock delay time out */
diff --git a/include/asm-arm/arch-arm1136/mem.h b/include/asm-arm/arch-arm1136/mem.h
index bd6fd50..2ead7d8 100644
--- a/include/asm-arm/arch-arm1136/mem.h
+++ b/include/asm-arm/arch-arm1136/mem.h
@@ -33,51 +33,99 @@
    early in init when NO global access are there */
 struct sdrc_data_s {
 	u32    sdrc_sharing;
-	u32    sdrc_mdcfg_0;
+	u32    sdrc_mdcfg_0_ddr;
+	u32    sdrc_mdcfg_0_sdr;
 	u32    sdrc_actim_ctrla_0;
 	u32    sdrc_actim_ctrlb_0;
 	u32    sdrc_rfr_ctrl;
-	u32    sdrc_mr_0;
+	u32    sdrc_mr_0_ddr;
+	u32    sdrc_mr_0_sdr;
 	u32    sdrc_dlla_ctrl;
 	u32    sdrc_dllb_ctrl;
 } /*__attribute__ ((packed))*/;
 typedef struct sdrc_data_s sdrc_data_t;
+
+typedef enum {
+	STACKED		= 0,
+	IP_DDR		= 1,
+	COMBO_DDR	= 2,
+	IP_SDR	 	= 3,
+} mem_t;
+
 #endif
 
 /* Slower full frequency range default timings for x32 operation*/
 #define H4_2420_SDRC_SHARING               0x00000100
-#define H4_2420_SDRC_MDCFG_0               0x01702011
-#define H4_2420_SDRC_ACTIM_CTRLA_0         0x9bead909
-#define H4_2420_SDRC_ACTIM_CTRLB_0         0x00000014
-#define H4_2420_SDRC_RFR_CTRL_ES1          0x00002401
-#define H4_2420_SDRC_RFR_CTRL              0x0002da01
-#define H4_2420_SDRC_MR_0                  0x00000032
-#define H4_2420_SDRC_DLLA_CTRL             0x00007307
-#define H4_2420_SDRC_DLLB_CTRL             0x00007307
-
-#define H4_2422_SDRC_SHARING               0x00004b00
-#define H4_2422_SDRC_MDCFG_0               0x00801011
-#define H4_2422_SDRC_ACTIM_CTRLA_0         0x9BEAD909
-#define H4_2422_SDRC_ACTIM_CTRLB_0         0x00000020
-#define H4_2422_SDRC_RFR_CTRL_ES1          0x00002401
-#define H4_2422_SDRC_RFR_CTRL              0x0002da03
-#define H4_2422_SDRC_MR_0                  0x00000032
-#define H4_2422_SDRC_DLLA_CTRL             0x00007307
-#define H4_2422_SDRC_DLLB_CTRL             0x00007307
-
-#define H4_2420_COMBO_MDCFG_0              0x00801011
+#define H4_2420_SDRC_MDCFG_0_SDR	0x00D04010 /* discrete sdr module */
+#define H4_2420_SDRC_MR_0_SDR		0x00000031
+#define H4_2420_SDRC_MDCFG_0_DDR	0x01702011 /* descrite ddr module */
+#define H4_2420_COMBO_MDCFG_0_DDR	0x00801011 /* combo module */
+#define H4_2420_SDRC_MR_0_DDR		0x00000032
+
+#ifndef CONFIG_OPTIMIZE_DDR
+# define H4_2420_SDRC_ACTIM_CTRLA_0	0x9bead909
+# define H4_2420_SDRC_ACTIM_CTRLB_0	0x00000014
+# define H4_2420_SDRC_RFR_CTRL_ES1	0x00002401
+# define H4_2420_SDRC_RFR_CTRL		0x0002da01
+#endif
+#define H4_2420_SDRC_DLLA_CTRL		0x00007307 /* load value at 100Mhz */
+#define H4_2420_SDRC_DLLB_CTRL		0x00007307
+
+#define H4_2422_SDRC_SHARING		0x00004b00
+#define H4_2422_SDRC_MDCFG_0_DDR	0x00801011 /* stacked ddr on 2422 */
+#ifndef CONFIG_OPTIMIZE_DDR
+# define H4_2422_SDRC_ACTIM_CTRLA_0	0x9BEAD909
+# define H4_2422_SDRC_ACTIM_CTRLB_0	0x00000020
+# define H4_2422_SDRC_RFR_CTRL_ES1	0x00002401
+# define H4_2422_SDRC_RFR_CTRL		0x0002da01
+#endif
+#define H4_2422_SDRC_MR_0_DDR		0x00000032
+#define H4_2422_SDRC_DLLA_CTRL		0x00007307
+#define H4_2422_SDRC_DLLB_CTRL		0x00007307
 
 /* optimized timings */
-#define H4_2420_SDRC_ACTIM_CTRLA_0_100MHz  0x5A59B485
-#define H4_2420_SDRC_ACTIM_CTRLB_0_100MHz  0x0000000e
+#define H4_242X_SDRC_ACTIM_CTRLA_0_100MHz  0x5A59B485
+#define H4_242X_SDRC_ACTIM_CTRLB_0_100MHz  0x0000000e
+#define H4_242X_SDRC_ACTIM_CTRLA_0_133MHz  0x8BA6E6C8	/* temp warn 0 settigs */
+#define H4_242X_SDRC_ACTIM_CTRLB_0_133MHz  0x00000010   /* temp warn 0 settings */
+#define H4_242X_SDRC_RFR_CTRL_100MHz	0x0002da01	/* this is not optimal yet */
+#define H4_242X_SDRC_RFR_CTRL_133MHz	0x0003de01
+
+#ifdef CONFIG_OPTIMIZE_DDR
+# ifdef PRCM_CONFIG_II
+#  define H4_2420_SDRC_ACTIM_CTRLA_0	H4_242X_SDRC_ACTIM_CTRLA_0_100MHz
+#  define H4_2420_SDRC_ACTIM_CTRLB_0	H4_242X_SDRC_ACTIM_CTRLB_0_100MHz
+#  define H4_2420_SDRC_RFR_CTRL_ES1	H4_242X_SDRC_RFR_CTRL_100MHz
+#  define H4_2420_SDRC_RFR_CTRL		H4_242X_SDRC_RFR_CTRL_100MHz
+# elif PRCM_CONFIG_III
+#  define H4_2420_SDRC_ACTIM_CTRLA_0	H4_242X_SDRC_ACTIM_CTRLA_0_133MHz
+#  define H4_2420_SDRC_ACTIM_CTRLB_0	H4_242X_SDRC_ACTIM_CTRLB_0_133MHz
+#  define H4_2420_SDRC_RFR_CTRL_ES1	H4_242X_SDRC_RFR_CTRL_133MHz
+#  define H4_2420_SDRC_RFR_CTRL		H4_242X_SDRC_RFR_CTRL_133MHz
+# endif
+# define H4_2422_SDRC_ACTIM_CTRLA_0	H4_2420_SDRC_ACTIM_CTRLA_0
+# define H4_2422_SDRC_ACTIM_CTRLB_0	H4_2420_SDRC_ACTIM_CTRLB_0
+# define H4_2422_SDRC_RFR_CTRL_ES1	H4_2420_SDRC_RFR_CTRL_ES1
+# define H4_2422_SDRC_RFR_CTRL		H4_2420_SDRC_RFR_CTRL
+#endif
 
 
+/* GPMC settings */
 #ifdef PRCM_CONFIG_II        /* L3 at 100MHz */
+#ifdef CFG_NAND_BOOT
+#define H4_24XX_GPMC_CONFIG1_0   0x0
+#define H4_24XX_GPMC_CONFIG2_0   0x00141400
+#define H4_24XX_GPMC_CONFIG3_0   0x00141400
+#define H4_24XX_GPMC_CONFIG4_0   0x0F010F01
+#define H4_24XX_GPMC_CONFIG5_0   0x010C1414
+#define H4_24XX_GPMC_CONFIG6_0   0x00000A80
+#else
 #define H4_24XX_GPMC_CONFIG1_0   0x3
-#define H4_24XX_GPMC_CONFIG2_0   0x001f1f01
-#define H4_24XX_GPMC_CONFIG3_0   0x00030301
-#define H4_24XX_GPMC_CONFIG4_0   0x0C030C03
+#define H4_24XX_GPMC_CONFIG2_0   0x000f0f01
+#define H4_24XX_GPMC_CONFIG3_0   0x00050502
+#define H4_24XX_GPMC_CONFIG4_0   0x0C060C06
 #define H4_24XX_GPMC_CONFIG5_0   0x01131F1F
+#endif
 #define H4_24XX_GPMC_CONFIG7_0   (0x00000C40|(H4_CS0_BASE >> 24))
 
 #define H4_24XX_GPMC_CONFIG1_1   0x00011000
@@ -90,18 +138,28 @@ typedef struct sdrc_data_s sdrc_data_t;
 #endif
 
 #ifdef PRCM_CONFIG_III  /* L3 at 133MHz */
+#ifdef CFG_NAND_BOOT
+#define H4_24XX_GPMC_CONFIG1_0   0x0
+#define H4_24XX_GPMC_CONFIG2_0   0x00141400
+#define H4_24XX_GPMC_CONFIG3_0   0x00141400
+#define H4_24XX_GPMC_CONFIG4_0   0x0F010F01
+#define H4_24XX_GPMC_CONFIG5_0   0x010C1414
+#define H4_24XX_GPMC_CONFIG6_0   0x00000A80
+#else
 #define H4_24XX_GPMC_CONFIG1_0   0x3
-#define H4_24XX_GPMC_CONFIG2_0   0x001f1f01
-#define H4_24XX_GPMC_CONFIG3_0   0x001F1F00
-#define H4_24XX_GPMC_CONFIG4_0   0x16061606
+#define H4_24XX_GPMC_CONFIG2_0   0x00151501
+#define H4_24XX_GPMC_CONFIG3_0   0x00060602
+#define H4_24XX_GPMC_CONFIG4_0   0x10081008
 #define H4_24XX_GPMC_CONFIG5_0   0x01131F1F
+#define H4_24XX_GPMC_CONFIG6_0   0x000004c4
+#endif
 #define H4_24XX_GPMC_CONFIG7_0   (0x00000C40|(H4_CS0_BASE >> 24))
 
 #define H4_24XX_GPMC_CONFIG1_1   0x00011000
 #define H4_24XX_GPMC_CONFIG2_1   0x001f1f01
-#define H4_24XX_GPMC_CONFIG3_1   0x001F1F00
-#define H4_24XX_GPMC_CONFIG4_1   0x1A061A06
-#define H4_24XX_GPMC_CONFIG5_1   0x041F1F1F
+#define H4_24XX_GPMC_CONFIG3_1   0x00080803
+#define H4_24XX_GPMC_CONFIG4_1   0x1C091C09
+#define H4_24XX_GPMC_CONFIG5_1   0x041f1F1F
 #define H4_24XX_GPMC_CONFIG6_1   0x000004C4
 #define H4_24XX_GPMC_CONFIG7_1   (0x00000F40|(H4_CS1_BASE >> 24))
 #endif
diff --git a/include/asm-arm/arch-arm1136/omap2420.h b/include/asm-arm/arch-arm1136/omap2420.h
index 357ad14..a2a9798 100644
--- a/include/asm-arm/arch-arm1136/omap2420.h
+++ b/include/asm-arm/arch-arm1136/omap2420.h
@@ -50,6 +50,7 @@
 #define GPMC_CONFIG3_0        (OMAP2420_GPMC_BASE+0x68)
 #define GPMC_CONFIG4_0        (OMAP2420_GPMC_BASE+0x6C)
 #define GPMC_CONFIG5_0        (OMAP2420_GPMC_BASE+0x70)
+#define GPMC_CONFIG6_0        (OMAP2420_GPMC_BASE+0x74)
 #define GPMC_CONFIG7_0	      (OMAP2420_GPMC_BASE+0x78)
 #define GPMC_CONFIG1_1        (OMAP2420_GPMC_BASE+0x90)
 #define GPMC_CONFIG2_1        (OMAP2420_GPMC_BASE+0x94)
@@ -62,6 +63,8 @@
 /* SMS */
 #define OMAP2420_SMS_BASE 0x68008000
 #define SMS_SYSCONFIG     (OMAP2420_SMS_BASE+0x10)
+#define SMS_CLASS_ARB0    (OMAP2420_SMS_BASE+0xD0)
+# define BURSTCOMPLETE_GROUP7    BIT31
 
 /* SDRC */
 #define OMAP2420_SDRC_BASE 0x68009000
diff --git a/include/asm-arm/arch-arm1136/sys_info.h b/include/asm-arm/arch-arm1136/sys_info.h
index fe68ccc..ef301ba 100644
--- a/include/asm-arm/arch-arm1136/sys_info.h
+++ b/include/asm-arm/arch-arm1136/sys_info.h
@@ -39,6 +39,7 @@ typedef struct  h4_system_data {
 	u32 cpu_rev;		/* rev of given cpu; ES1, ES2,...*/
 } h4_sys_data;
 
+#define SDR_DISCRETE      4
 #define DDR_STACKED       3      /* stacked part on 2422 */
 #define DDR_COMBO         2      /* combo part on cpu daughter card (menalaeus) */
 #define DDR_DISCRETE      1      /* 2x16 parts on daughter card */
diff --git a/include/asm-arm/arch-arm1136/sys_proto.h b/include/asm-arm/arch-arm1136/sys_proto.h
index 4a7612f..2cd8455 100644
--- a/include/asm-arm/arch-arm1136/sys_proto.h
+++ b/include/asm-arm/arch-arm1136/sys_proto.h
@@ -44,4 +44,10 @@ u32 wait_on_value(u32 read_bit_mask, u32 match_value, u32 read_addr, u32 bound);
 u32 get_board_type(void);
 void display_board_info(u32);
 void update_mux(u32,u32);
+
+u32 running_in_sdram(void);
+u32 running_in_sram(void);
+u32 running_in_flash(void);
+u32 running_from_internal_boot(void);
+
 #endif
diff --git a/include/configs/omap2420h4.h b/include/configs/omap2420h4.h
index da68c1c..8516054 100644
--- a/include/configs/omap2420h4.h
+++ b/include/configs/omap2420h4.h
@@ -38,11 +38,20 @@
 /*#define CONFIG_APTIX           1    #* define if on APTIX test chip */
 /*#define CONFIG_VIRTIO          1    #* Using Virtio simulator */
 
-#define PRCM_CONFIG_II           1
-#define CONFIG_PARTIAL_SRAM      1
+/* Clock config to target*/
+#define PRCM_CONFIG_II		1
+//#define PRCM_CONFIG_III	1
+
+/* Memory configuration on board */
+//#define CONFIG_OPTIMIZE_DDR	1
 
 #include <asm/arch/omap2420.h>        /* get chip and board defs */
 
+/* On H4, NOR and NAND flash are mutual exclusive.
+   Define this if you want to use NAND
+ */
+//#define CFG_NAND_BOOT
+
 #ifdef CONFIG_APTIX
 #define V_SCLK                   1500000
 #else
@@ -59,6 +68,7 @@
 #define CONFIG_CMDLINE_TAG       1    /* enable passing of ATAGs */
 #define CONFIG_SETUP_MEMORY_TAGS 1
 #define CONFIG_INITRD_TAG        1
+#define CONFIG_REVISION_TAG      1
 
 /*
  * Size of malloc() pool
@@ -112,8 +122,11 @@
 #define CONFIG_BAUDRATE          115200
 #define CFG_BAUDRATE_TABLE       {9600, 19200, 38400, 57600, 115200}
 
-#define CONFIG_COMMANDS          (CONFIG_CMD_DFL | CFG_CMD_DHCP | CFG_CMD_I2C)
-
+#ifdef CFG_NAND_BOOT
+#define CONFIG_COMMANDS          (CONFIG_CMD_DFL | CFG_CMD_DHCP | CFG_CMD_I2C | CFG_CMD_NAND | CFG_CMD_JFFS2)
+#else
+#define CONFIG_COMMANDS          (CONFIG_CMD_DFL | CFG_CMD_DHCP | CFG_CMD_I2C | CFG_CMD_JFFS2)
+#endif
 /* I'd like to get to these. Snap kernel loads if we make MMC go */
   /* #define CONFIG_COMMANDS       (CONFIG_CMD_DFL | CFG_CMD_NAND | CFG_CMD_JFFS2 | CFG_CMD_DHCP | CFG_CMD_MMC | CFG_CMD_FAT | CFG_CMD_I2C) */
 
@@ -122,6 +135,43 @@
 /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
 #include <cmd_confdefs.h>
 
+/*
+ *  Board NAND Info.
+ */
+#define CFG_NAND_ADDR 0x04000000  /* physical address to access nand at CS0*/
+
+#define CFG_MAX_NAND_DEVICE 1	/* Max number of NAND devices */
+#define SECTORSIZE          512
+
+#define ADDR_COLUMN         1
+#define ADDR_PAGE           2
+#define ADDR_COLUMN_PAGE    3
+
+#define NAND_ChipID_UNKNOWN 0x00
+#define NAND_MAX_FLOORS     1
+#define NAND_MAX_CHIPS      1
+
+#define WRITE_NAND_COMMAND(d, adr) do {*(volatile u16 *)0x6800A07C = d;} while(0)
+#define WRITE_NAND_ADDRESS(d, adr) do {*(volatile u16 *)0x6800A080 = d;} while(0)
+#define WRITE_NAND(d, adr) do {*(volatile u16 *)0x6800A084 = d;} while(0)
+#define READ_NAND(adr) (*(volatile u16 *)0x6800A084)
+#define NAND_WAIT_READY(nand)  udelay(10)
+
+#define NAND_NO_RB          1
+
+#define CFG_NAND_WP
+#define NAND_WP_OFF()  do {*(volatile u32 *)(0x6800A050) |= 0x00000010;} while(0)
+#define NAND_WP_ON()  do {*(volatile u32 *)(0x6800A050) &= ~0x00000010;} while(0)
+
+
+#define NAND_CTL_CLRALE(nandptr)
+#define NAND_CTL_SETALE(nandptr)
+#define NAND_CTL_CLRCLE(nandptr)
+#define NAND_CTL_SETCLE(nandptr)
+#define NAND_DISABLE_CE(nand)
+#define NAND_ENABLE_CE(nand)
+
+
 #define CONFIG_BOOTDELAY         3
 
 #ifdef NFS_BOOT_DEFAULTS
@@ -203,11 +253,22 @@
 #define CFG_MAX_FLASH_BANKS      2           /* max number of memory banks */
 #define CFG_MAX_FLASH_SECT       (259)	     /* max number of sectors on one chip */
 
+#ifdef CFG_NAND_BOOT
+#define CFG_ENV_IS_IN_NAND	1
+#define CFG_ENV_OFFSET	0x80000	/* environment starts here  */
+#else
 #define CFG_ENV_ADDR             (CFG_FLASH_BASE + SZ_128K)
 #define	CFG_ENV_IS_IN_FLASH      1
+#endif
 
 /* timeout values are in ticks */
-#define CFG_FLASH_ERASE_TOUT     (10*75*CFG_HZ) /* Timeout for Flash Erase */
-#define CFG_FLASH_WRITE_TOUT     (10*75*CFG_HZ) /* Timeout for Flash Write */
+#define CFG_FLASH_ERASE_TOUT     (30*75*CFG_HZ) /* Timeout for Flash Erase */
+#define CFG_FLASH_WRITE_TOUT     (30*75*CFG_HZ) /* Timeout for Flash Write */
+
+/* Flash banks JFFS2 should use */
+#define CFG_MAX_MTD_BANKS	(CFG_MAX_FLASH_BANKS+CFG_MAX_NAND_DEVICE)
+#define CFG_JFFS2_MEM_NAND
+#define CFG_JFFS2_FIRST_BANK	1		/* use flash_info[1] */
+#define CFG_JFFS2_NUM_BANKS     1
 
 #endif							/* __CONFIG_H */
diff --git a/lib_arm/armlinux.c b/lib_arm/armlinux.c
index bf26566..5596569 100644
--- a/lib_arm/armlinux.c
+++ b/lib_arm/armlinux.c
@@ -377,6 +377,23 @@ static void setup_videolfb_tag (gd_t *gd)
 }
 #endif /* CONFIG_VFD || CONFIG_LCD */
 
+#ifdef CONFIG_REVISION_TAG
+void setup_revision_tag(struct tag **in_params)
+{
+	u32 rev = 0;
+#ifdef CONFIG_OMAP2420H4
+	u32 get_board_rev(void);
+
+	rev = get_board_rev();
+#endif
+	params->hdr.tag = ATAG_REVISION;
+	params->hdr.size = tag_size (tag_revision);
+	params->u.revision.rev = rev;
+	params = tag_next (params);
+}
+#endif  /* CONFIG_REVISION_TAG */
+
+
 static void setup_end_tag (bd_t *bd)
 {
 	params->hdr.tag = ATAG_NONE;
diff --git a/net/net.c b/net/net.c
index e2b2a78..d7523fd 100644
--- a/net/net.c
+++ b/net/net.c
@@ -1292,6 +1292,7 @@ NetReceive(volatile uchar * inpkt, int len)
 #endif
 			return;
 		}
+		break;
 
 	case PROT_RARP:
 #ifdef ET_DEBUG