codingstyle cleanup for spi driver

..and rm unused CONFIG_FSL_SPI define

Signed-off-by: Kim Phillips <kim.phillips@freescale.com>

5 files changed, 37 insertions, 34 deletions

diff --git a/board/freescale/mpc8349emds/mpc8349emds.c b/board/freescale/mpc8349emds/mpc8349emds.c
index 3fb2a45..9f4ac8e 100644
--- a/board/freescale/mpc8349emds/mpc8349emds.c
+++ b/board/freescale/mpc8349emds/mpc8349emds.c
@@ -263,7 +263,7 @@ void spi_eeprom_chipsel(int cs)
 {
 	volatile gpio83xx_t *iopd = &((immap_t *)CFG_IMMR)->gpio[0];
 
-	if(cs)
+	if (cs)
 		iopd->dat &= ~SPI_CS_MASK;
 	else
 		iopd->dat |=  SPI_CS_MASK;
diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile
index 6b3898b..0b7a2df 100644
--- a/drivers/spi/Makefile
+++ b/drivers/spi/Makefile
@@ -23,13 +23,13 @@
 
 include $(TOPDIR)/config.mk
 
-LIB 	:= $(obj)libspi.a
+LIB	:= $(obj)libspi.a
 
 COBJS-y += mpc8xxx_spi.o
 
 COBJS	:= $(COBJS-y)
-SRCS 	:= $(COBJS:.o=.c)
-OBJS 	:= $(addprefix $(obj),$(COBJS))
+SRCS	:= $(COBJS:.o=.c)
+OBJS	:= $(addprefix $(obj),$(COBJS))
 
 all:	$(LIB)
 
diff --git a/drivers/spi/mpc8xxx_spi.c b/drivers/spi/mpc8xxx_spi.c
index 18e68d3..a3d1c95 100644
--- a/drivers/spi/mpc8xxx_spi.c
+++ b/drivers/spi/mpc8xxx_spi.c
@@ -27,16 +27,13 @@
 
 #ifdef CONFIG_HARD_SPI
 
-#define SPI_EV_NE	0x80000000 >> 22	/* Receiver Not Empty */
-#define SPI_EV_NF	0x80000000 >> 23	/* Transmitter Not Full */
+#define SPI_EV_NE	(0x80000000 >> 22)	/* Receiver Not Empty */
+#define SPI_EV_NF	(0x80000000 >> 23)	/* Transmitter Not Full */
 
-#define SPI_MODE_LOOP	0x80000000 >> 1	/* Loopback mode */
-#define SPI_MODE_REV	0x80000000 >> 5	/* Reverse mode - MSB first */
-#define SPI_MODE_MS	0x80000000 >> 6	/* Always master */
-#define SPI_MODE_EN	0x80000000 >> 7	/* Enable interface */
-
-#define SPI_PRESCALER(reg, div) (reg)=((reg) & 0xfff0ffff) | ((div)<<16)
-#define SPI_CHARLENGTH(reg, div) (reg)=((reg) & 0xff0fffff) | ((div)<<20)
+#define SPI_MODE_LOOP	(0x80000000 >> 1)	/* Loopback mode */
+#define SPI_MODE_REV	(0x80000000 >> 5)	/* Reverse mode - MSB first */
+#define SPI_MODE_MS	(0x80000000 >> 6)	/* Always master */
+#define SPI_MODE_EN	(0x80000000 >> 7)	/* Enable interface */
 
 #define SPI_TIMEOUT	1000
 
@@ -44,18 +41,19 @@ void spi_init(void)
 {
 	volatile spi8xxx_t *spi = &((immap_t *) (CFG_IMMR))->spi;
 
-	/* ------------------------------------------------
+	/*
 	 * SPI pins on the MPC83xx are not muxed, so all we do is initialize
 	 * some registers
-	 * ------------------------------------------------ */
+	 */
 	spi->mode = SPI_MODE_REV | SPI_MODE_MS | SPI_MODE_EN;
-	SPI_PRESCALER(spi->mode, 1);	/* Use SYSCLK / 8  (16.67MHz typ.) */
+	spi->mode = (spi->mode & 0xfff0ffff) | (1 << 16); /* Use SYSCLK / 8
+							     (16.67MHz typ.) */
 	spi->event = 0xffffffff;	/* Clear all SPI events */
 	spi->mask = 0x00000000;	/* Mask  all SPI interrupts */
 	spi->com = 0;		/* LST bit doesn't do anything, so disregard */
 }
 
-int spi_xfer(spi_chipsel_type chipsel, int bitlen, uchar * dout, uchar * din)
+int spi_xfer(spi_chipsel_type chipsel, int bitlen, uchar *dout, uchar *din)
 {
 	volatile spi8xxx_t *spi = &((immap_t *) (CFG_IMMR))->spi;
 	unsigned int tmpdout, tmpdin, event;
@@ -81,16 +79,21 @@ int spi_xfer(spi_chipsel_type chipsel, int bitlen, uchar * dout, uchar * din)
 
 		/* The LEN field of the SPMODE register is set as follows:
 		 *
-		 * Bit length           setting
-		 * l <= 4               3
-		 * 4 < l <= 16          l - 1
-		 * l > 16               0
+		 * Bit length             setting
+		 * len <= 4               3
+		 * 4 < len <= 16          len - 1
+		 * len > 16               0
 		 */
 
-		if (bitlen <= 16)
-			SPI_CHARLENGTH(spi->mode, bitlen <= 4 ? 3 : bitlen - 1);
-		else {
-			SPI_CHARLENGTH(spi->mode, 0);
+		if (bitlen <= 16) {
+			if (bitlen <= 4)
+				spi->mode = (spi->mode & 0xff0fffff) |
+				            (3 << 20);
+			else
+				spi->mode = (spi->mode & 0xff0fffff) |
+				            ((bitlen - 1) << 20);
+		} else {
+			spi->mode = (spi->mode & 0xff0fffff);
 			/* Set up the next iteration if sending > 32 bits */
 			bitlen -= 32;
 			dout += 4;
@@ -99,11 +102,11 @@ int spi_xfer(spi_chipsel_type chipsel, int bitlen, uchar * dout, uchar * din)
 		spi->tx = tmpdout;	/* Write the data out */
 		debug("*** spi_xfer: ... %08x written\n", tmpdout);
 
-		/* --------------------------------
+		/*
 		 * Wait for SPI transmit to get out
 		 * or time out (1 second = 1000 ms)
 		 * The NE event must be read and cleared first
-		 * -------------------------------- */
+		 */
 		for (tm = 0, isRead = 0; tm < SPI_TIMEOUT; ++tm) {
 			event = spi->event;
 			if (event & SPI_EV_NE) {
@@ -117,10 +120,12 @@ int spi_xfer(spi_chipsel_type chipsel, int bitlen, uchar * dout, uchar * din)
 					din += 4;
 				}
 			}
-			/* Only bail when we've had both NE and NF events.
+			/*
+			 * Only bail when we've had both NE and NF events.
 			 * This will cause timeouts on RO devices, so maybe
 			 * in the future put an arbitrary delay after writing
-			 * the device.  Arbitrary delays suck, though... */
+			 * the device.  Arbitrary delays suck, though...
+			 */
 			if (isRead && (event & SPI_EV_NF))
 				break;
 		}
@@ -132,7 +137,7 @@ int spi_xfer(spi_chipsel_type chipsel, int bitlen, uchar * dout, uchar * din)
 
 	if (chipsel != NULL)
 		(*chipsel) (0);	/* deselect the target chip */
+
 	return 0;
 }
-
 #endif				/* CONFIG_HARD_SPI */
diff --git a/include/asm-ppc/mpc8xxx_spi.h b/include/asm-ppc/mpc8xxx_spi.h
index 38f12b9..053d11e 100644
--- a/include/asm-ppc/mpc8xxx_spi.h
+++ b/include/asm-ppc/mpc8xxx_spi.h
@@ -32,8 +32,7 @@
 	defined(CONFIG_MPC8315) || \
 	defined(CONFIG_MPC837X)
 
-typedef struct spi8xxx
-{
+typedef struct spi8xxx {
 	u8 res0[0x20];	/* 0x0-0x01f reserved */
 	u32 mode;	/* mode register  */
 	u32 event;	/* event register */
diff --git a/include/configs/MPC8349EMDS.h b/include/configs/MPC8349EMDS.h
index 584c59d..07f2f30 100644
--- a/include/configs/MPC8349EMDS.h
+++ b/include/configs/MPC8349EMDS.h
@@ -356,9 +356,8 @@
 #define CFG_I2C2_OFFSET		0x3100
 
 /* SPI */
-#define CONFIG_HARD_SPI			/* SPI with hardware support*/
+#define CONFIG_HARD_SPI			/* SPI with hardware support */
 #undef CONFIG_SOFT_SPI			/* SPI bit-banged */
-#define CONFIG_FSL_SPI
 
 /* GPIOs.  Used as SPI chip selects */
 #define CFG_GPIO1_PRELIM