85xx: Add RMII support for MPC8569MDS

This patch supports UCC working at RMII mode on PIB board, fixup fdt blob to
support rmii in kernel. It also changes the name of enable_mpc8569mds_qe_mdio to
enalbe_mpc8569mds_qe_uec which is  more accurate.

Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

4 files changed, 144 insertions, 7 deletions

diff --git a/board/freescale/mpc8569mds/bcsr.c b/board/freescale/mpc8569mds/bcsr.c
index 17c8478..a936edb 100644
--- a/board/freescale/mpc8569mds/bcsr.c
+++ b/board/freescale/mpc8569mds/bcsr.c
@@ -35,8 +35,9 @@ void disable_8569mds_flash_write()
 	clrbits_8((u8 *)(CONFIG_SYS_BCSR_BASE + 17), BCSR17_FLASH_nWP);
 }
 
-void enable_8569mds_qe_mdio()
+void enable_8569mds_qe_uec()
 {
+#if defined(CONFIG_SYS_UCC_RGMII_MODE)
 	setbits_8((u8 *)(CONFIG_SYS_BCSR_BASE + 7),
 			BCSR7_UCC1_GETH_EN | BCSR7_UCC1_RGMII_EN);
 	setbits_8((u8 *)(CONFIG_SYS_BCSR_BASE + 8),
@@ -45,6 +46,18 @@ void enable_8569mds_qe_mdio()
 			BCSR9_UCC3_GETH_EN | BCSR9_UCC3_RGMII_EN);
 	setbits_8((u8 *)(CONFIG_SYS_BCSR_BASE + 10),
 			BCSR10_UCC4_GETH_EN | BCSR10_UCC4_RGMII_EN);
+#elif defined(CONFIG_SYS_UCC_RMII_MODE)
+	/* Set UCC1-4 working at RMII mode */
+	clrbits_8((u8 *)(CONFIG_SYS_BCSR_BASE + 7),
+			BCSR7_UCC1_GETH_EN | BCSR7_UCC1_RGMII_EN);
+	clrbits_8((u8 *)(CONFIG_SYS_BCSR_BASE + 8),
+			BCSR8_UCC2_GETH_EN | BCSR8_UCC2_RGMII_EN);
+	clrbits_8((u8 *)(CONFIG_SYS_BCSR_BASE + 9),
+			BCSR9_UCC3_GETH_EN | BCSR9_UCC3_RGMII_EN);
+	clrbits_8((u8 *)(CONFIG_SYS_BCSR_BASE + 10),
+			BCSR10_UCC4_GETH_EN | BCSR10_UCC4_RGMII_EN);
+	setbits_8((u8 *)(CONFIG_SYS_BCSR_BASE + 9), BCSR9_UCC3_RMII_EN);
+#endif
 }
 
 void disable_8569mds_brd_eeprom_write_protect()
diff --git a/board/freescale/mpc8569mds/bcsr.h b/board/freescale/mpc8569mds/bcsr.h
index 8efe9bd..e5d63c7 100644
--- a/board/freescale/mpc8569mds/bcsr.h
+++ b/board/freescale/mpc8569mds/bcsr.h
@@ -76,7 +76,7 @@
 
 void enable_8569mds_flash_write(void);
 void disable_8569mds_flash_write(void);
-void enable_8569mds_qe_mdio(void);
+void enable_8569mds_qe_uec(void);
 void disable_8569mds_brd_eeprom_write_protect(void);
 
 #endif	/* __BCSR_H_ */
diff --git a/board/freescale/mpc8569mds/mpc8569mds.c b/board/freescale/mpc8569mds/mpc8569mds.c
index 387ecad..1e7526a 100644
--- a/board/freescale/mpc8569mds/mpc8569mds.c
+++ b/board/freescale/mpc8569mds/mpc8569mds.c
@@ -47,6 +47,7 @@ const qe_iop_conf_t qe_iop_conf_tab[] = {
 	/* QE_MUX_MDIO */
 	{2,  30, 3, 0, 2}, /* QE_MUX_MDIO              */
 
+#if defined(CONFIG_SYS_UCC_RGMII_MODE)
 	/* UCC_1_RGMII */
 	{2, 11, 2, 0, 1}, /* CLK12 */
 	{0,  0, 1, 0, 3}, /* ENET1_TXD0_SER1_TXD0      */
@@ -107,6 +108,44 @@ const qe_iop_conf_t qe_iop_conf_tab[] = {
 	{2, 17, 2, 0, 2}, /* ENET4_GRXCLK              */
 	{2, 24, 1, 0, 2}, /* ENET4_GTXCLK              */
 
+#elif defined(CONFIG_SYS_UCC_RMII_MODE)
+	/* UCC_1_RMII */
+	{2, 15, 2, 0, 1}, /* CLK16 */
+	{0,  0, 1, 0, 3}, /* ENET1_TXD0_SER1_TXD0      */
+	{0,  1, 1, 0, 3}, /* ENET1_TXD1_SER1_TXD1      */
+	{0,  6, 2, 0, 3}, /* ENET1_RXD0_SER1_RXD0      */
+	{0,  7, 2, 0, 1}, /* ENET1_RXD1_SER1_RXD1      */
+	{0,  4, 1, 0, 2}, /* ENET1_TX_EN_SER1_RTS_B    */
+	{0, 12, 2, 0, 3}, /* ENET1_RX_DV_SER1_CTS_B    */
+
+	/* UCC_2_RMII */
+	{2, 15, 2, 0, 1}, /* CLK16 */
+	{0, 14, 1, 0, 2}, /* ENET2_TXD0_SER2_TXD0      */
+	{0, 15, 1, 0, 2}, /* ENET2_TXD1_SER2_TXD1      */
+	{0, 20, 2, 0, 2}, /* ENET2_RXD0_SER2_RXD0      */
+	{0, 21, 2, 0, 1}, /* ENET2_RXD1_SER2_RXD1      */
+	{0, 18, 1, 0, 2}, /* ENET2_TX_EN_SER2_RTS_B    */
+	{0, 26, 2, 0, 3}, /* ENET2_RX_DV_SER2_CTS_B    */
+
+	/* UCC_3_RMII */
+	{2, 15, 2, 0, 1}, /* CLK16 */
+	{0, 29, 1, 0, 2}, /* ENET3_TXD0_SER3_TXD0      */
+	{0, 30, 1, 0, 3}, /* ENET3_TXD1_SER3_TXD1      */
+	{1,  3, 2, 0, 3}, /* ENET3_RXD0_SER3_RXD0      */
+	{1,  4, 2, 0, 1}, /* ENET3_RXD1_SER3_RXD1      */
+	{1,  1, 1, 0, 1}, /* ENET3_TX_EN_SER3_RTS_B    */
+	{1,  9, 2, 0, 3}, /* ENET3_RX_DV_SER3_CTS_B    */
+
+	/* UCC_4_RMII */
+	{2, 15, 2, 0, 1}, /* CLK16 */
+	{1, 12, 1, 0, 2}, /* ENET4_TXD0_SER4_TXD0      */
+	{1, 13, 1, 0, 2}, /* ENET4_TXD1_SER4_TXD1      */
+	{1, 18, 2, 0, 2}, /* ENET4_RXD0_SER4_RXD0      */
+	{1, 19, 2, 0, 1}, /* ENET4_RXD1_SER4_RXD1      */
+	{1, 16, 1, 0, 2}, /* ENET4_TX_EN_SER4_RTS_B    */
+	{1, 24, 2, 0, 3}, /* ENET4_RX_DV_SER4_CTS_B    */
+#endif
+
 	/* UART1 is muxed with QE PortF bit [9-12].*/
 	{5, 12, 2, 0, 3}, /* UART1_SIN */
 	{5, 9,  1, 0, 3}, /* UART1_SOUT */
@@ -128,7 +167,7 @@ int board_early_init_f (void)
 	enable_8569mds_flash_write();
 
 #ifdef CONFIG_QE
-	enable_8569mds_qe_mdio();
+	enable_8569mds_qe_uec();
 #endif
 
 #if CONFIG_SYS_I2C2_OFFSET
@@ -350,6 +389,61 @@ pci_init_board(void)
 #if defined(CONFIG_OF_BOARD_SETUP)
 void ft_board_setup(void *blob, bd_t *bd)
 {
+#if defined(CONFIG_SYS_UCC_RMII_MODE)
+	int nodeoff, off, err;
+	unsigned int val;
+	const u32 *ph;
+	const u32 *index;
+
+	/* fixup device tree for supporting rmii mode */
+	nodeoff = -1;
+	while ((nodeoff = fdt_node_offset_by_compatible(blob, nodeoff,
+				"ucc_geth")) >= 0) {
+		err = fdt_setprop_string(blob, nodeoff, "tx-clock-name",
+						"clk16");
+		if (err < 0) {
+			printf("WARNING: could not set tx-clock-name %s.\n",
+				fdt_strerror(err));
+			break;
+		}
+
+		err = fdt_setprop_string(blob, nodeoff, "phy-connection-type",
+					"rmii");
+		if (err < 0) {
+			printf("WARNING: could not set phy-connection-type "
+				"%s.\n", fdt_strerror(err));
+			break;
+		}
+
+		index = fdt_getprop(blob, nodeoff, "cell-index", 0);
+		if (index == NULL) {
+			printf("WARNING: could not get cell-index of ucc\n");
+			break;
+		}
+
+		ph = fdt_getprop(blob, nodeoff, "phy-handle", 0);
+		if (ph == NULL) {
+			printf("WARNING: could not get phy-handle of ucc\n");
+			break;
+		}
+
+		off = fdt_node_offset_by_phandle(blob, *ph);
+		if (off < 0) {
+			printf("WARNING: could not get phy node	%s.\n",
+				fdt_strerror(err));
+			break;
+		}
+
+		val = 0x7 + *index; /* RMII phy address starts from 0x8 */
+
+		err = fdt_setprop(blob, off, "reg", &val, sizeof(u32));
+		if (err < 0) {
+			printf("WARNING: could not set reg for phy-handle "
+				"%s.\n", fdt_strerror(err));
+			break;
+		}
+	}
+#endif
 	ft_cpu_setup(blob, bd);
 
 #ifdef CONFIG_PCIE1
diff --git a/include/configs/MPC8569MDS.h b/include/configs/MPC8569MDS.h
index 259cd57..c97ea2f 100644
--- a/include/configs/MPC8569MDS.h
+++ b/include/configs/MPC8569MDS.h
@@ -282,6 +282,8 @@ extern unsigned long get_clock_freq(void);
 /*
  * QE UEC ethernet configuration
  */
+#define CONFIG_SYS_UCC_RGMII_MODE	/* Set UCC work at RGMII by default */
+#undef CONFIG_SYS_UCC_RMII_MODE		/* Set UCC work at RMII mode */
 
 #define CONFIG_MIIM_ADDRESS	(CONFIG_SYS_CCSRBAR + 0x82120)
 #define CONFIG_UEC_ETH
@@ -294,11 +296,18 @@ extern unsigned long get_clock_freq(void);
 #ifdef CONFIG_UEC_ETH1
 #define CONFIG_SYS_UEC1_UCC_NUM        0       /* UCC1 */
 #define CONFIG_SYS_UEC1_RX_CLK         QE_CLK_NONE
+#if defined(CONFIG_SYS_UCC_RGMII_MODE)
 #define CONFIG_SYS_UEC1_TX_CLK         QE_CLK12
 #define CONFIG_SYS_UEC1_ETH_TYPE       GIGA_ETH
 #define CONFIG_SYS_UEC1_PHY_ADDR       7
 #define CONFIG_SYS_UEC1_INTERFACE_MODE ENET_1000_RGMII_ID
-#endif
+#elif defined(CONFIG_SYS_UCC_RMII_MODE)
+#define CONFIG_SYS_UEC1_TX_CLK         QE_CLK16	/* CLK16 for RMII */
+#define CONFIG_SYS_UEC1_ETH_TYPE       FAST_ETH
+#define CONFIG_SYS_UEC1_PHY_ADDR       8	/* 0x8 for RMII */
+#define CONFIG_SYS_UEC1_INTERFACE_MODE ENET_100_RMII
+#endif /* CONFIG_SYS_UCC_RGMII_MODE */
+#endif /* CONFIG_UEC_ETH1 */
 
 #define CONFIG_UEC_ETH2         /* GETH2 */
 #define CONFIG_HAS_ETH1
@@ -306,11 +315,18 @@ extern unsigned long get_clock_freq(void);
 #ifdef CONFIG_UEC_ETH2
 #define CONFIG_SYS_UEC2_UCC_NUM        1       /* UCC2 */
 #define CONFIG_SYS_UEC2_RX_CLK         QE_CLK_NONE
+#if defined(CONFIG_SYS_UCC_RGMII_MODE)
 #define CONFIG_SYS_UEC2_TX_CLK         QE_CLK17
 #define CONFIG_SYS_UEC2_ETH_TYPE       GIGA_ETH
 #define CONFIG_SYS_UEC2_PHY_ADDR       1
 #define CONFIG_SYS_UEC2_INTERFACE_MODE ENET_1000_RGMII_ID
-#endif
+#elif defined(CONFIG_SYS_UCC_RMII_MODE)
+#define CONFIG_SYS_UEC2_TX_CLK         QE_CLK16	/* CLK 16 for RMII */
+#define CONFIG_SYS_UEC2_ETH_TYPE       FAST_ETH
+#define CONFIG_SYS_UEC2_PHY_ADDR       0x9	/* 0x9 for RMII */
+#define CONFIG_SYS_UEC2_INTERFACE_MODE ENET_100_RMII
+#endif /* CONFIG_SYS_UCC_RGMII_MODE */
+#endif /* CONFIG_UEC_ETH2 */
 
 #define CONFIG_UEC_ETH3         /* GETH3 */
 #define CONFIG_HAS_ETH2
@@ -318,11 +334,18 @@ extern unsigned long get_clock_freq(void);
 #ifdef CONFIG_UEC_ETH3
 #define CONFIG_SYS_UEC3_UCC_NUM        2       /* UCC3 */
 #define CONFIG_SYS_UEC3_RX_CLK         QE_CLK_NONE
+#if defined(CONFIG_SYS_UCC_RGMII_MODE)
 #define CONFIG_SYS_UEC3_TX_CLK         QE_CLK12
 #define CONFIG_SYS_UEC3_ETH_TYPE       GIGA_ETH
 #define CONFIG_SYS_UEC3_PHY_ADDR       2
 #define CONFIG_SYS_UEC3_INTERFACE_MODE ENET_1000_RGMII_ID
-#endif
+#elif defined(CONFIG_SYS_UCC_RMII_MODE)
+#define CONFIG_SYS_UEC3_TX_CLK		QE_CLK16 /* CLK_16 for RMII */
+#define CONFIG_SYS_UEC3_ETH_TYPE	FAST_ETH
+#define CONFIG_SYS_UEC3_PHY_ADDR	0xA     /* 0xA for RMII */
+#define CONFIG_SYS_UEC3_INTERFACE_MODE ENET_100_RMII
+#endif /* CONFIG_SYS_UCC_RGMII_MODE */
+#endif /* CONFIG_UEC_ETH3 */
 
 #define CONFIG_UEC_ETH4         /* GETH4 */
 #define CONFIG_HAS_ETH3
@@ -330,11 +353,18 @@ extern unsigned long get_clock_freq(void);
 #ifdef CONFIG_UEC_ETH4
 #define CONFIG_SYS_UEC4_UCC_NUM        3       /* UCC4 */
 #define CONFIG_SYS_UEC4_RX_CLK         QE_CLK_NONE
+#if defined(CONFIG_SYS_UCC_RGMII_MODE)
 #define CONFIG_SYS_UEC4_TX_CLK         QE_CLK17
 #define CONFIG_SYS_UEC4_ETH_TYPE       GIGA_ETH
 #define CONFIG_SYS_UEC4_PHY_ADDR       3
 #define CONFIG_SYS_UEC4_INTERFACE_MODE ENET_1000_RGMII_ID
-#endif
+#elif defined(CONFIG_SYS_UCC_RMII_MODE)
+#define CONFIG_SYS_UEC4_TX_CLK		QE_CLK16 /* CLK16 for RMII */
+#define CONFIG_SYS_UEC4_ETH_TYPE	FAST_ETH
+#define CONFIG_SYS_UEC4_PHY_ADDR	0xB     /* 0xB for RMII */
+#define CONFIG_SYS_UEC4_INTERFACE_MODE ENET_100_RMII
+#endif /* CONFIG_SYS_UCC_RGMII_MODE */
+#endif /* CONFIG_UEC_ETH4 */
 #endif /* CONFIG_QE */
 
 #if defined(CONFIG_PCI)