Merge branch 'master' of git://git.denx.de/u-boot-ppc4xx

52 files changed, 3027 insertions, 2152 deletions

diff --git a/MAINTAINERS b/MAINTAINERS
index 17b2f9c..8244b51 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -135,6 +135,7 @@ Jon Diekema <jon.diekema@smiths-aerospace.com>
 
 Dirk Eibach <eibach@gdsys.de>
 
+	dlvision        PPC405EP
 	gdppc440etx	PPC440EP/GR
 	neo		PPC405EP
 
@@ -171,6 +172,7 @@ Matthias Fuchs <matthias.fuchs@esd-electronics.com>
 	PCI405		PPC405GP
 	PLU405		PPC405EP
 	PMC405		PPC405GP
+	PMC405DE	PPC405EP
 	PMC440		PPC440EPx
 	VOH405		PPC405EP
 	VOM405		PPC405EP
@@ -381,7 +383,6 @@ Travis Sawyer (travis.sawyer@sandburst.com>
 
 	KAREF		PPC440GX
 	METROBOX	PPC440GX
-	XPEDITE1K	PPC440GX
 
 Georg Schardt <schardt@team-ctech.de>
 
@@ -436,6 +437,7 @@ Rune Torgersen <runet@innovsys.com>
 
 Peter Tyser <ptyser@xes-inc.com>
 
+	XPEDITE1000	PPC440GX
 	XPEDITE5170	MPC8640
 	XPEDITE5200	MPC8548
 	XPEDITE5370	MPC8572
diff --git a/MAKEALL b/MAKEALL
index d38904a..6515669 100755
--- a/MAKEALL
+++ b/MAKEALL
@@ -194,6 +194,7 @@ LIST_4xx="		\
 	csb272		\
 	csb472		\
 	DASA_SIM	\
+	dlvision	\
 	DP405		\
 	DU405		\
 	DU440		\
@@ -237,6 +238,7 @@ LIST_4xx="		\
 	PIP405		\
 	PLU405		\
 	PMC405		\
+	PMC405DE	\
 	PMC440		\
 	PPChameleonEVB	\
 	quad100hd	\
@@ -258,7 +260,7 @@ LIST_4xx="		\
 	WUH405		\
 	xilinx-ppc440-generic \
 	xilinx-ppc440-generic_flash \
-	XPEDITE1K	\
+	XPEDITE1000	\
 	yellowstone	\
 	yosemite	\
 	yucca		\
diff --git a/Makefile b/Makefile
index 2320db6..17605d4 100644
--- a/Makefile
+++ b/Makefile
@@ -1297,6 +1297,9 @@ csb472_config:	unconfig
 DASA_SIM_config: unconfig
 	@$(MKCONFIG) $(@:_config=) ppc ppc4xx dasa_sim esd
 
+dlvision_config: unconfig
+	@$(MKCONFIG) $(@:_config=) ppc ppc4xx dlvision gdsys
+
 DP405_config:	unconfig
 	@$(MKCONFIG) $(@:_config=) ppc ppc4xx dp405 esd
 
@@ -1456,6 +1459,9 @@ PLU405_config:	unconfig
 PMC405_config:	unconfig
 	@$(MKCONFIG) $(@:_config=) ppc ppc4xx pmc405 esd
 
+PMC405DE_config:	unconfig
+	@$(MKCONFIG) $(@:_config=) ppc ppc4xx pmc405de esd
+
 PMC440_config:	unconfig
 	@$(MKCONFIG) $(@:_config=) ppc ppc4xx pmc440 esd
 
@@ -1604,8 +1610,8 @@ xilinx-ppc440-generic_config: unconfig
 		>> $(obj)board/xilinx/ppc440-generic/config.tmp
 	@$(MKCONFIG) xilinx-ppc440-generic ppc ppc4xx ppc440-generic xilinx
 
-XPEDITE1K_config:	unconfig
-	@$(MKCONFIG) $(@:_config=) ppc ppc4xx xpedite1k
+XPEDITE1000_config:	unconfig
+	@$(MKCONFIG) $(@:_config=) ppc ppc4xx xpedite1000 xes
 
 yosemite_config \
 yellowstone_config: unconfig
diff --git a/board/amcc/canyonlands/Makefile b/board/amcc/canyonlands/Makefile
index 2aeead6..12f8a64 100644
--- a/board/amcc/canyonlands/Makefile
+++ b/board/amcc/canyonlands/Makefile
@@ -25,10 +25,11 @@ include $(TOPDIR)/config.mk
 
 LIB	= $(obj)lib$(BOARD).a
 
-COBJS	:= $(BOARD).o
-COBJS	+= bootstrap.o
+COBJS-y	:= $(BOARD).o
+COBJS-$(CONFIG_CMD_CHIP_CONFIG) += chip_config.o
 SOBJS	:= init.o
 
+COBJS   := $(COBJS-y)
 SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
 OBJS	:= $(addprefix $(obj),$(COBJS))
 SOBJS	:= $(addprefix $(obj),$(SOBJS))
diff --git a/board/amcc/canyonlands/bootstrap.c b/board/amcc/canyonlands/bootstrap.c
deleted file mode 100644
index 6dc2cca..0000000
--- a/board/amcc/canyonlands/bootstrap.c
+++ /dev/null
@@ -1,195 +0,0 @@
-/*
- * (C) Copyright 2008
- * Stefan Roese, DENX Software Engineering, sr@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- */
-
-#include <common.h>
-#include <command.h>
-#include <i2c.h>
-#include <asm/io.h>
-
-/*
- * NOR and NAND boot options change bytes 5, 6, 8, 9, 11. The
- * values are independent of the rest of the clock settings.
- */
-
-#define NAND_COMPATIBLE	0x01
-#define NOR_COMPATIBLE  0x02
-
-#define I2C_EEPROM_ADDR 0x52
-
-static char *config_labels[] = {
-	"CPU: 600 PLB: 200 OPB: 100 EBC: 100",
-	"CPU: 800 PLB: 200 OPB: 100 EBC: 100",
-	"CPU:1000 PLB: 200 OPB: 100 EBC: 100",
-	"CPU:1066 PLB: 266 OPB:  88 EBC:  88",
-	NULL
-};
-
-static u8 boot_configs[][17] = {
-	{
-		(NAND_COMPATIBLE | NOR_COMPATIBLE),
-		0x86, 0x80, 0xce, 0x1f, 0x79, 0x80, 0x00, 0xa0, 0x40, 0x08,
-		0x23, 0x50, 0x0d, 0x05, 0x00, 0x00
-	},
-	{
-		(NAND_COMPATIBLE | NOR_COMPATIBLE),
-		0x86, 0x80, 0xba, 0x14, 0x99, 0x80, 0x00, 0xa0, 0x40, 0x08,
-		0x23, 0x50, 0x0d, 0x05, 0x00, 0x00
-	},
-	{
-		(NAND_COMPATIBLE | NOR_COMPATIBLE),
-		0x86, 0x82, 0x96, 0x19, 0xb9, 0x80, 0x00, 0xa0, 0x40, 0x08,
-		0x23, 0x50, 0x0d, 0x05, 0x00, 0x00
-	},
-	{
-		(NAND_COMPATIBLE | NOR_COMPATIBLE),
-		0x86, 0x80, 0xb3, 0x01, 0x9d, 0x80, 0x00, 0xa0, 0x40, 0x08,
-		0x23, 0x50, 0x0d, 0x05, 0x00, 0x00
-	},
-	{
-		0,
-		0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
-	}
-};
-
-/*
- * Bytes 5,6,8,9,11 change for NAND boot
- */
-#if 0
-/*
- * Values for 512 page size NAND chips, not used anymore, just
- * keep them here for reference
- */
-static u8 nand_boot[] = {
-	0x90, 0x01,  0xa0, 0x68, 0x58
-};
-#else
-/*
- * Values for 2k page size NAND chips
- */
-static u8 nand_boot[] = {
-	0x90, 0x01,  0xa0, 0xe8, 0x58
-};
-#endif
-
-static int do_bootstrap(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
-{
-	u8 *buf, b_nand;
-	int x, y, nbytes, selcfg;
-	extern char console_buffer[];
-
-	if (argc < 2) {
-		cmd_usage(cmdtp);
-		return 1;
-	}
-
-	if ((strcmp(argv[1], "nor") != 0) &&
-	    (strcmp(argv[1], "nand") != 0)) {
-		printf("Unsupported boot-device - only nor|nand support\n");
-		return 1;
-	}
-
-	/* set the nand flag based on provided input */
-	if ((strcmp(argv[1], "nand") == 0))
-		b_nand = 1;
-	else
-		b_nand = 0;
-
-	printf("Available configurations: \n\n");
-
-	if (b_nand) {
-		for(x = 0, y = 0; boot_configs[x][0] != 0; x++) {
-			/* filter on nand compatible */
-			if (boot_configs[x][0] & NAND_COMPATIBLE) {
-				printf(" %d - %s\n", (y+1), config_labels[x]);
-				y++;
-			}
-		}
-	} else {
-		for(x = 0, y = 0; boot_configs[x][0] != 0; x++) {
-			/* filter on nor compatible */
-			if (boot_configs[x][0] & NOR_COMPATIBLE) {
-				printf(" %d - %s\n", (y+1), config_labels[x]);
-				y++;
-			}
-		}
-	}
-
-	do {
-		nbytes = readline(" Selection [1-x / quit]: ");
-
-		if (nbytes) {
-			if (strcmp(console_buffer, "quit") == 0)
-				return 0;
-			selcfg = simple_strtol(console_buffer, NULL, 10);
-			if ((selcfg < 1) || (selcfg > y))
-				nbytes = 0;
-		}
-	} while (nbytes == 0);
-
-
-	y = (selcfg - 1);
-
-	for (x = 0; boot_configs[x][0] != 0; x++) {
-		if (b_nand) {
-			if (boot_configs[x][0] & NAND_COMPATIBLE) {
-				if (y > 0)
-					y--;
-				else if (y < 1)
-					break;
-			}
-		} else {
-			if (boot_configs[x][0] & NOR_COMPATIBLE) {
-				if (y > 0)
-					y--;
-				else if (y < 1)
-					break;
-			}
-		}
-	}
-
-	buf = &boot_configs[x][1];
-
-	if (b_nand) {
-		buf[5] = nand_boot[0];
-		buf[6] = nand_boot[1];
-		buf[8] = nand_boot[2];
-		buf[9] = nand_boot[3];
-		buf[11] = nand_boot[4];
-	}
-
-	if (i2c_write(I2C_EEPROM_ADDR, 0, 1, buf, 16) != 0)
-		printf("Error writing to EEPROM at address 0x%x\n", I2C_EEPROM_ADDR);
-	udelay(CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS * 1000);
-
-	printf("Done\n");
-	printf("Please power-cycle the board for the changes to take effect\n");
-
-	return 0;
-}
-
-U_BOOT_CMD(
-	bootstrap,	2,	0,	do_bootstrap,
-	"program the I2C bootstrap EEPROM",
-	"<nand|nor> - strap to boot from NAND or NOR flash"
-);
diff --git a/board/amcc/canyonlands/chip_config.c b/board/amcc/canyonlands/chip_config.c
new file mode 100644
index 0000000..e46f4d8
--- /dev/null
+++ b/board/amcc/canyonlands/chip_config.c
@@ -0,0 +1,87 @@
+/*
+ * (C) Copyright 2008-2009
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+#include <common.h>
+#include <asm/ppc4xx_config.h>
+
+struct ppc4xx_config ppc4xx_config_val[] = {
+	{
+		"600-nor", "NOR  CPU: 600 PLB: 200 OPB: 100 EBC: 100",
+		{
+			0x86, 0x80, 0xce, 0x1f, 0x79, 0x80, 0x00, 0xa0,
+			0x40, 0x08, 0x23, 0x50, 0x0d, 0x05, 0x00, 0x00
+		}
+	},
+	{
+		"600-nand", "NAND CPU: 600 PLB: 200 OPB: 100 EBC: 100",
+		{
+			0x86, 0x80, 0xce, 0x1f, 0x79, 0x90, 0x01, 0xa0,
+			0xa0, 0xe8, 0x23, 0x58, 0x0d, 0x05, 0x00, 0x00
+		}
+	},
+	{
+		"800-nor", "NOR  CPU: 800 PLB: 200 OPB: 100 EBC: 100",
+		{
+			0x86, 0x80, 0xba, 0x14, 0x99, 0x80, 0x00, 0xa0,
+			0x40, 0x08, 0x23, 0x50, 0x0d, 0x05, 0x00, 0x00
+		}
+	},
+	{
+		"800-nand", "NAND CPU: 800 PLB: 200 OPB: 100 EBC: 100",
+		{
+			0x86, 0x80, 0xba, 0x14, 0x99, 0x90, 0x01, 0xa0,
+			0xa0, 0xe8, 0x23, 0x58, 0x0d, 0x05, 0x00, 0x00
+		}
+	},
+	{
+		"1000-nor", "NOR  CPU:1000 PLB: 200 OPB: 100 EBC: 100",
+		{
+			0x86, 0x82, 0x96, 0x19, 0xb9, 0x80, 0x00, 0xa0,
+			0x40, 0x08, 0x23, 0x50, 0x0d, 0x05, 0x00, 0x00
+		}
+	},
+	{
+		"1000-nand", "NAND CPU:1000 PLB: 200 OPB: 100 EBC: 100",
+		{
+			0x86, 0x82, 0x96, 0x19, 0xb9, 0x90, 0x01, 0xa0,
+			0xa0, 0xe8, 0x23, 0x58, 0x0d, 0x05, 0x00, 0x00
+		}
+	},
+	{
+		"1066-nor", "NOR  CPU:1066 PLB: 266 OPB:  88 EBC:  88",
+		{
+			0x86, 0x80, 0xb3, 0x01, 0x9d, 0x80, 0x00, 0xa0,
+			0x40, 0x08, 0x23, 0x50, 0x0d, 0x05, 0x00, 0x00
+		}
+	},
+	{
+		"1066-nand", "NAND CPU:1066 PLB: 266 OPB:  88 EBC:  88",
+		{
+			0x86, 0x80, 0xb3, 0x01, 0x9d, 0x90, 0x01, 0xa0,
+			0xa0, 0xe8, 0x23, 0x58, 0x0d, 0x05, 0x00, 0x00
+		}
+	},
+};
+
+int ppc4xx_config_count = ARRAY_SIZE(ppc4xx_config_val);
diff --git a/board/amcc/kilauea/Makefile b/board/amcc/kilauea/Makefile
index df0a68f..751e9f3 100644
--- a/board/amcc/kilauea/Makefile
+++ b/board/amcc/kilauea/Makefile
@@ -25,8 +25,10 @@ include $(TOPDIR)/config.mk
 
 LIB	= $(obj)lib$(BOARD).a
 
-COBJS	= $(BOARD).o cmd_pll.o
+COBJS-y	:= $(BOARD).o
+COBJS-$(CONFIG_CMD_CHIP_CONFIG) += chip_config.o
 
+COBJS   := $(COBJS-y)
 SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
 OBJS	:= $(addprefix $(obj),$(SOBJS) $(COBJS))
 
diff --git a/board/amcc/kilauea/chip_config.c b/board/amcc/kilauea/chip_config.c
new file mode 100644
index 0000000..9a3fc15
--- /dev/null
+++ b/board/amcc/kilauea/chip_config.c
@@ -0,0 +1,73 @@
+/*
+ * (C) Copyright 2009
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+#include <common.h>
+#include <asm/ppc4xx_config.h>
+
+struct ppc4xx_config ppc4xx_config_val[] = {
+	{
+		"333-nor","NOR  CPU: 333 PLB: 166 OPB:  83 EBC:  83",
+		{
+			0x8c, 0x12, 0xec, 0x12, 0x98, 0x00, 0x0a, 0x00,
+			0x40, 0x08, 0x23, 0x50, 0x00, 0x05, 0x00, 0x00
+		}
+	},
+	{
+		"400-133-nor", "NOR  CPU: 400 PLB: 133 OPB:  66 EBC:  66",
+		{
+			0x8e, 0x0e, 0xe8, 0x13, 0x98, 0x00, 0x0a, 0x00,
+			0x40, 0x08, 0x23, 0x50, 0x00, 0x05, 0x00, 0x00
+		}
+	},
+	{
+		"400-nor", "NOR  CPU: 400 PLB: 200 OPB: 100 EBC: 100",
+		{
+			0x8e, 0x0e, 0xe8, 0x12, 0x98, 0x00, 0x0a, 0x00,
+			0x40, 0x08, 0x23, 0x50, 0x00, 0x05, 0x00, 0x00
+		}
+	},
+	{
+		"533-nor", "NOR  CPU: 533 PLB: 177 OPB:  88 EBC:  88",
+	  {
+		  0x8e, 0x43, 0x60, 0x13, 0x98, 0x00, 0x0a, 0x00,
+		  0x40, 0x08, 0x23, 0x50, 0x00, 0x05, 0x00, 0x00
+	  }
+	},
+	{
+		"600-nor", "NOR  CPU: 600 PLB: 200 OPB: 100 EBC: 100",
+		{
+			0x8d, 0x02, 0x34, 0x13, 0x98, 0x00, 0x0a, 0x00,
+			0x40, 0x08, 0x23, 0x50, 0x00, 0x05, 0x00, 0x00
+		}
+	},
+	{
+		"666-nor", "NOR  CPU: 666 PLB: 222 OPB: 111 EBC: 111",
+		{
+			0x8d, 0x03, 0x78, 0x13, 0x98, 0x00, 0x0a, 0x00,
+			0x40, 0x08, 0x23, 0x50, 0x00, 0x05, 0x00, 0x00
+		}
+	},
+};
+
+int ppc4xx_config_count = ARRAY_SIZE(ppc4xx_config_val);
diff --git a/board/amcc/kilauea/cmd_pll.c b/board/amcc/kilauea/cmd_pll.c
deleted file mode 100644
index 9bae67e..0000000
--- a/board/amcc/kilauea/cmd_pll.c
+++ /dev/null
@@ -1,297 +0,0 @@
-/*
- * (C) Copyright 2000, 2001
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- */
-
-/*
- * ehnus: change pll frequency.
- * Wed Sep  5 11:45:17 CST 2007
- * hsun@udtech.com.cn
- */
-
-
-#include <common.h>
-#include <config.h>
-#include <command.h>
-#include <i2c.h>
-
-#ifdef CONFIG_CMD_EEPROM
-
-#define EEPROM_CONF_OFFSET		0
-#define EEPROM_TEST_OFFSET		16
-#define EEPROM_SDSTP_PARAM		16
-
-#define PLL_NAME_MAX			12
-#define BUF_STEP			8
-
-/* eeprom_wirtes 8Byte per op. */
-#define EEPROM_ALTER_FREQ(freq)						\
-	do {								\
-		int __i;						\
-		for (__i = 0; __i < 2; __i++)				\
-			eeprom_write (CONFIG_SYS_I2C_EEPROM_ADDR,		\
-				      EEPROM_CONF_OFFSET + __i*BUF_STEP, \
-				      pll_select[freq],			\
-				      BUF_STEP + __i*BUF_STEP);		\
-	} while (0)
-
-#define PDEBUG
-#ifdef	PDEBUG
-#define PLL_DEBUG	pll_debug(EEPROM_CONF_OFFSET)
-#else
-#define PLL_DEBUG
-#endif
-
-typedef enum {
-	PLL_ebc20,
-	PLL_333,
-	PLL_4001,
-	PLL_4002,
-	PLL_533,
-	PLL_600,
-	PLL_666,	/* For now, kilauea can't support */
-	RCONF,
-	WTEST,
-	PLL_TOTAL
-} pll_freq_t;
-
-static const char
-pll_name[][PLL_NAME_MAX] = {
-	"PLL_ebc20",
-	"PLL_333",
-	"PLL_400@1",
-	"PLL_400@2",
-	"PLL_533",
-	"PLL_600",
-	"PLL_666",
-	"RCONF",
-	"WTEST",
-	""
-};
-
-/*
- * ehnus:
- */
-static uchar
-pll_select[][EEPROM_SDSTP_PARAM] = {
-	/* 0: CPU 333MHz EBC 20MHz, for test only */
-	{
-		0x8c, 0x12, 0xec, 0x12, 0x88, 0x00, 0x0a, 0x00,
-		0x40, 0x08, 0x23, 0x50, 0x00, 0x05, 0x00, 0x00
-	},
-
-	/* 0: 333 */
-	{
-		0x8c, 0x12, 0xec, 0x12, 0x98, 0x00, 0x0a, 0x00,
-		0x40, 0x08, 0x23, 0x50, 0x00, 0x05, 0x00, 0x00
-	},
-
-	/* 1: 400_266 */
-	{
-		0x8e, 0x0e, 0xe8, 0x13, 0x98, 0x00, 0x0a, 0x00,
-		0x40, 0x08, 0x23, 0x50, 0x00, 0x05, 0x00, 0x00
-	},
-
-	/* 2: 400 */
-	{
-		0x8e, 0x0e, 0xe8, 0x12, 0x98, 0x00, 0x0a, 0x00,
-		0x40, 0x08, 0x23, 0x50, 0x00, 0x05, 0x00, 0x00
-	},
-
-	/* 3: 533 */
-	{
-		0x8e, 0x43, 0x60, 0x13, 0x98, 0x00, 0x0a, 0x00,
-		0x40, 0x08, 0x23, 0x50, 0x00, 0x05, 0x00, 0x00
-	},
-
-	/* 4: 600 */
-	{
-		0x8d, 0x02, 0x34, 0x13, 0x98, 0x00, 0x0a, 0x00,
-		0x40, 0x08, 0x23, 0x50, 0x00, 0x05, 0x00, 0x00
-	},
-
-	/* 5: 666 */
-	{
-		0x8d, 0x03, 0x78, 0x13, 0x98, 0x00, 0x0a, 0x00,
-		0x40, 0x08, 0x23, 0x50, 0x00, 0x05, 0x00, 0x00
-	},
-
-	{}
-};
-
-static uchar
-testbuf[EEPROM_SDSTP_PARAM] = {
-	0x00, 0x11, 0x22, 0x33, 0x44, 0x55, 0x66, 0x77,
-	0x88, 0x99, 0xaa, 0xbb, 0xcc, 0xdd, 0xee, 0xff
-};
-
-static void
-pll_debug(int off)
-{
-	int i;
-	uchar buffer[EEPROM_SDSTP_PARAM];
-
-	memset(buffer, 0, sizeof(buffer));
-	eeprom_read(CONFIG_SYS_I2C_EEPROM_ADDR, off,
-		    buffer, EEPROM_SDSTP_PARAM);
-
-	printf("Debug: SDSTP[0-3] at offset \"0x%02x\" lists as follows: \n", off);
-	for (i = 0; i < EEPROM_SDSTP_PARAM; i++)
-		printf("%02x ", buffer[i]);
-	printf("\n");
-}
-
-static void
-test_write(void)
-{
-	printf("Debug: test eeprom_write ... ");
-
-	/*
-	 * Write twice, 8 bytes per write
-	 */
-	eeprom_write (CONFIG_SYS_I2C_EEPROM_ADDR, EEPROM_TEST_OFFSET,
-		      testbuf, 8);
-	eeprom_write (CONFIG_SYS_I2C_EEPROM_ADDR, EEPROM_TEST_OFFSET+8,
-		      testbuf, 16);
-	printf("done\n");
-
-	pll_debug(EEPROM_TEST_OFFSET);
-}
-
-int
-do_pll_alter (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
-{
-	char c = '\0';
-	pll_freq_t pll_freq;
-	if (argc < 2) {
-		cmd_usage(cmdtp);
-		goto ret;
-	}
-
-	for (pll_freq = PLL_ebc20; pll_freq < PLL_TOTAL; pll_freq++)
-		if (!strcmp(pll_name[pll_freq], argv[1]))
-			break;
-
-	switch (pll_freq) {
-	case PLL_ebc20:
-	case PLL_333:
-	case PLL_4001:
-	case PLL_4002:
-	case PLL_533:
-	case PLL_600:
-		EEPROM_ALTER_FREQ(pll_freq);
-		break;
-
-	case PLL_666:		/* not support */
-		printf("Choose this option will result in a boot failure."
-		       "\nContinue? (Y/N): ");
-
-		c = getc(); putc('\n');
-
-		if ((c == 'y') || (c == 'Y')) {
-			EEPROM_ALTER_FREQ(pll_freq);
-			break;
-		}
-		goto ret;
-
-	case RCONF:
-		pll_debug(EEPROM_CONF_OFFSET);
-		goto ret;
-	case WTEST:
-		printf("DEBUG: write test\n");
-		test_write();
-		goto ret;
-
-	default:
-		printf("Invalid options\n\n");
-		cmd_usage(cmdtp);
-		goto ret;
-	}
-
-	printf("PLL set to %s, "
-	       "reset the board to take effect\n", pll_name[pll_freq]);
-
-	PLL_DEBUG;
-ret:
-	return 0;
-}
-
-U_BOOT_CMD(
-	pllalter, CONFIG_SYS_MAXARGS, 1,        do_pll_alter,
-	"change pll frequence",
-	"pllalter <selection>      - change pll frequence \n\n\
-	** New freq take effect after reset. ** \n\
-	----------------------------------------------\n\
-	PLL_ebc20: Board: AMCC 405EX(r) Evaluation Board\n\
-	\t	Same as PLL_333	\n\
-	\t	except          \n\
-	\t	EBC: 20 MHz     \n\
-	----------------------------------------------\n\
-	PLL_333: Board: AMCC 405EX(r) Evaluation Board\n\
-	\t	VCO: 666 MHz  \n\
-	\t	CPU: 333 MHz  \n\
-	\t	PLB: 166 MHz  \n\
-	\t	OPB: 83 MHz   \n\
-	\t	DDR: 83 MHz   \n\
-	------------------------------------------------\n\
-	PLL_400@1: Board: AMCC 405EX(r) Evaluation Board\n\
-	\t	VCO: 800 MHz  \n\
-	\t	CPU: 400 MHz  \n\
-	\t	PLB: 133 MHz  \n\
-	\t	OPB: 66  MHz  \n\
-	\t	DDR: 133 MHz  \n\
-	------------------------------------------------\n\
-	PLL_400@2: Board: AMCC 405EX(r) Evaluation Board\n\
-	\t	VCO: 800 MHz  \n\
-	\t	CPU: 400 MHz  \n\
-	\t	PLB: 200 MHz  \n\
-	\t	OPB: 100 MHz  \n\
-	\t	DDR: 200 MHz  \n\
-	----------------------------------------------\n\
-	PLL_533: Board: AMCC 405EX(r) Evaluation Board\n\
-	\t	VCO: 1066 MHz  \n\
-	\t	CPU: 533  MHz  \n\
-	\t	PLB: 177  MHz  \n\
-	\t	OPB: 88   MHz  \n\
-	\t	DDR: 177  MHz  \n\
-	----------------------------------------------\n\
-	PLL_600: Board: AMCC 405EX(r) Evaluation Board\n\
-	\t	VCO: 1200 MHz  \n\
-	\t	CPU: 600  MHz  \n\
-	\t	PLB: 200  MHz  \n\
-	\t	OPB: 100  MHz  \n\
-	\t	DDR: 200  MHz  \n\
-	----------------------------------------------\n\
-	PLL_666: Board: AMCC 405EX(r) Evaluation Board\n\
-	\t	VCO: 1333 MHz  \n\
-	\t	CPU: 666  MHz  \n\
-	\t	PLB: 166  MHz  \n\
-	\t	OPB: 83   MHz  \n\
-	\t	DDR: 166  MHz  \n\
-	-----------------------------------------------\n\
-	RCONF: Read current eeprom configuration.      \n\
-	-----------------------------------------------\n\
-	WTEST: Test EEPROM write with predefined values\n\
-	-----------------------------------------------"
-);
-
-#endif	/* CONFIG_CMD_EEPROM */
diff --git a/board/esd/plu405/plu405.c b/board/esd/plu405/plu405.c
index fdacbf6..e41545a 100644
--- a/board/esd/plu405/plu405.c
+++ b/board/esd/plu405/plu405.c
@@ -27,10 +27,7 @@
 #include <command.h>
 #include <malloc.h>
 
-
-#if 0
-#define FPGA_DEBUG
-#endif
+#undef FPGA_DEBUG
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -48,7 +45,6 @@ const unsigned char fpgadata[] =
  */
 #include "../common/fpga.c"
 
-
 /*
  * include common auto-update code (for esd boards)
  */
@@ -68,7 +64,7 @@ int N_AU_IMAGES = (sizeof(au_image) / sizeof(au_image[0]));
 /* Prototypes */
 int gunzip(void *, int, unsigned char *, unsigned long *);
 
-int board_early_init_f (void)
+int board_early_init_f(void)
 {
 	/*
 	 * IRQ 0-15  405GP internally generated; active high; level sensitive
@@ -94,15 +90,13 @@ int board_early_init_f (void)
 	 * EBC Configuration Register: set ready timeout to
 	 * 512 ebc-clks -> ca. 15 us
 	 */
-	mtebc (epcr, 0xa8400000); /* ebc always driven */
+	mtebc(epcr, 0xa8400000); /* ebc always driven */
 
 	return 0;
 }
 
-int misc_init_r (void)
+int misc_init_r(void)
 {
-	unsigned char *duart0_mcr = (unsigned char *)((ulong)DUART0_BA + 4);
-	unsigned char *duart1_mcr = (unsigned char *)((ulong)DUART1_BA + 4);
 	unsigned char *dst;
 	unsigned char fctr;
 	ulong len = sizeof(fpgadata);
@@ -115,9 +109,10 @@ int misc_init_r (void)
 	gd->bd->bi_flashoffset = 0;
 
 	dst = malloc(CONFIG_SYS_FPGA_MAX_SIZE);
-	if (gunzip (dst, CONFIG_SYS_FPGA_MAX_SIZE, (uchar *)fpgadata, &len) != 0) {
-		printf ("GUNZIP ERROR - must RESET board to recover\n");
-		do_reset (NULL, 0, 0, NULL);
+	if (gunzip(dst, CONFIG_SYS_FPGA_MAX_SIZE,
+		   (uchar *)fpgadata, &len) != 0) {
+		printf("GUNZIP ERROR - must RESET board to recover\n");
+		do_reset(NULL, 0, 0, NULL);
 	}
 
 	status = fpga_boot(dst, len);
@@ -152,7 +147,7 @@ int misc_init_r (void)
 			for (index=0;index<1000;index++)
 				udelay(1000);
 		}
-		putc ('\n');
+		putc('\n');
 		do_reset(NULL, 0, 0, NULL);
 	}
 
@@ -165,7 +160,7 @@ int misc_init_r (void)
 		printf("%s ", &(dst[index+1]));
 		index += len+3;
 	}
-	putc ('\n');
+	putc('\n');
 
 	free(dst);
 
@@ -180,29 +175,35 @@ int misc_init_r (void)
 	/*
 	 * Reset external DUARTs
 	 */
-	out_be32((void*)GPIO0_OR, in_be32((void*)GPIO0_OR) | CONFIG_SYS_DUART_RST);
+	out_be32((void*)GPIO0_OR,
+		 in_be32((void*)GPIO0_OR) | CONFIG_SYS_DUART_RST);
 	udelay(10);
-	out_be32((void*)GPIO0_OR, in_be32((void*)GPIO0_OR) & ~CONFIG_SYS_DUART_RST);
+	out_be32((void*)GPIO0_OR,
+		 in_be32((void*)GPIO0_OR) & ~CONFIG_SYS_DUART_RST);
 	udelay(1000);
 
 	/*
 	 * Set NAND-FLASH GPIO signals to default
 	 */
 	out_be32((void*)GPIO0_OR,
-		 in_be32((void*)GPIO0_OR) & ~(CONFIG_SYS_NAND_CLE | CONFIG_SYS_NAND_ALE));
-	out_be32((void*)GPIO0_OR, in_be32((void*)GPIO0_OR) | CONFIG_SYS_NAND_CE);
+		 in_be32((void*)GPIO0_OR) &
+		 ~(CONFIG_SYS_NAND_CLE | CONFIG_SYS_NAND_ALE));
+	out_be32((void*)GPIO0_OR,
+		 in_be32((void*)GPIO0_OR) | CONFIG_SYS_NAND_CE);
 
 	/*
 	 * Setup EEPROM write protection
 	 */
-	out_be32((void*)GPIO0_OR, in_be32((void*)GPIO0_OR) | CONFIG_SYS_EEPROM_WP);
-	out_be32((void*)GPIO0_TCR, in_be32((void*)GPIO0_TCR) | CONFIG_SYS_EEPROM_WP);
+	out_be32((void*)GPIO0_OR,
+		 in_be32((void*)GPIO0_OR) | CONFIG_SYS_EEPROM_WP);
+	out_be32((void*)GPIO0_TCR,
+		 in_be32((void*)GPIO0_TCR) | CONFIG_SYS_EEPROM_WP);
 
 	/*
 	 * Enable interrupts in exar duart mcr[3]
 	 */
-	out_8(duart0_mcr, 0x08);
-	out_8(duart1_mcr, 0x08);
+	out_8((void *)DUART0_BA + 4, 0x08);
+	out_8((void *)DUART1_BA + 4, 0x08);
 
 	/*
 	 * Enable auto RS485 mode in 2nd external uart
@@ -213,26 +214,25 @@ int misc_init_r (void)
 	out_8((void *)DUART1_BA + 1, fctr); /* write FCTR */
 	out_8((void *)DUART1_BA + 3, 0);    /* write LCR */
 
-	return (0);
+	return 0;
 }
 
 /*
  * Check Board Identity:
  */
-int checkboard (void)
+int checkboard(void)
 {
 	char str[64];
-	int i = getenv_r ("serial#", str, sizeof(str));
+	int i = getenv_r("serial#", str, sizeof(str));
 
-	puts ("Board: ");
+	puts("Board: ");
 
-	if (i == -1) {
-		puts ("### No HW ID - assuming PLU405");
-	} else {
+	if (i == -1)
+		puts("### No HW ID - assuming PLU405");
+	else
 		puts(str);
-	}
 
-	putc ('\n');
+	putc('\n');
 	return 0;
 }
 
@@ -245,10 +245,12 @@ void ide_set_reset(int on)
 	 */
 	if (on) {		/* assert RESET */
 		out_be16((void *)FPGA_CTRL,
-			 in_be16((void *)FPGA_CTRL) & ~CONFIG_SYS_FPGA_CTRL_CF_RESET);
+			 in_be16((void *)FPGA_CTRL) &
+			 ~CONFIG_SYS_FPGA_CTRL_CF_RESET);
 	} else {		/* release RESET */
 		out_be16((void *)FPGA_CTRL,
-			 in_be16((void *)FPGA_CTRL) | CONFIG_SYS_FPGA_CTRL_CF_RESET);
+			 in_be16((void *)FPGA_CTRL) |
+			 CONFIG_SYS_FPGA_CTRL_CF_RESET);
 	}
 }
 #endif /* CONFIG_IDE_RESET */
@@ -266,14 +268,14 @@ void reset_phy(void)
 
 #if defined(CONFIG_SYS_EEPROM_WREN)
 /* Input: <dev_addr>  I2C address of EEPROM device to enable.
- *         <state>     -1: deliver current state
- *	               0: disable write
- *		       1: enable write
- *  Returns:           -1: wrong device address
- *                      0: dis-/en- able done
- *		     0/1: current state if <state> was -1.
+ *	       <state> -1: deliver current state
+ *			0: disable write
+ *			1: enable write
+ *  Returns:	       -1: wrong device address
+ *			0: dis-/en- able done
+ *		      0/1: current state if <state> was -1.
  */
-int eeprom_write_enable (unsigned dev_addr, int state)
+int eeprom_write_enable(unsigned dev_addr, int state)
 {
 	if (CONFIG_SYS_I2C_EEPROM_ADDR != dev_addr) {
 		return -1;
@@ -282,51 +284,55 @@ int eeprom_write_enable (unsigned dev_addr, int state)
 		case 1:
 			/* Enable write access, clear bit GPIO0. */
 			out_be32((void*)GPIO0_OR,
-				 in_be32((void*)GPIO0_OR) & ~CONFIG_SYS_EEPROM_WP);
+				 in_be32((void*)GPIO0_OR) &
+				 ~CONFIG_SYS_EEPROM_WP);
 			state = 0;
 			break;
 		case 0:
 			/* Disable write access, set bit GPIO0. */
 			out_be32((void*)GPIO0_OR,
-				 in_be32((void*)GPIO0_OR) | CONFIG_SYS_EEPROM_WP);
+				 in_be32((void*)GPIO0_OR) |
+				 CONFIG_SYS_EEPROM_WP);
 			state = 0;
 			break;
 		default:
 			/* Read current status back. */
-			state = (0 == (in_be32((void*)GPIO0_OR) &
-				       CONFIG_SYS_EEPROM_WP));
+			state = ((in_be32((void*)GPIO0_OR) &
+				       CONFIG_SYS_EEPROM_WP) == 0);
 			break;
 		}
 	}
 	return state;
 }
 
-int do_eep_wren (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+int do_eep_wren(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 {
 	int query = argc == 1;
 	int state = 0;
 
 	if (query) {
 		/* Query write access state. */
-		state = eeprom_write_enable (CONFIG_SYS_I2C_EEPROM_ADDR, -1);
+		state = eeprom_write_enable(CONFIG_SYS_I2C_EEPROM_ADDR, -1);
 		if (state < 0) {
-			puts ("Query of write access state failed.\n");
+			puts("Query of write access state failed.\n");
 		} else {
-			printf ("Write access for device 0x%0x is %sabled.\n",
-				CONFIG_SYS_I2C_EEPROM_ADDR, state ? "en" : "dis");
+			printf("Write access for device 0x%0x is %sabled.\n",
+			       CONFIG_SYS_I2C_EEPROM_ADDR,
+			       state ? "en" : "dis");
 			state = 0;
 		}
 	} else {
-		if ('0' == argv[1][0]) {
+		if (argv[1][0] == '0') {
 			/* Disable write access. */
-			state = eeprom_write_enable (CONFIG_SYS_I2C_EEPROM_ADDR, 0);
+			state = eeprom_write_enable(CONFIG_SYS_I2C_EEPROM_ADDR,
+						    0);
 		} else {
 			/* Enable write access. */
-			state = eeprom_write_enable (CONFIG_SYS_I2C_EEPROM_ADDR, 1);
-		}
-		if (state < 0) {
-			puts ("Setup of write access state failed.\n");
+			state = eeprom_write_enable(CONFIG_SYS_I2C_EEPROM_ADDR,
+						    1);
 		}
+		if (state < 0)
+			puts("Setup of write access state failed.\n");
 	}
 
 	return state;
diff --git a/board/esd/pmc405de/Makefile b/board/esd/pmc405de/Makefile
new file mode 100644
index 0000000..a080649
--- /dev/null
+++ b/board/esd/pmc405de/Makefile
@@ -0,0 +1,53 @@
+#
+# (C) Copyright 2000-2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= $(obj)lib$(BOARD).a
+
+COBJS-y	= $(BOARD).o
+COBJS-y	+= ../common/cmd_loadpci.o
+COBJS-$(CONFIG_CMD_CHIP_CONFIG) += chip_config.o
+
+COBJS	:= $(COBJS-y)
+SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS	:= $(addprefix $(obj),$(COBJS))
+SOBJS	:= $(addprefix $(obj),$(SOBJS))
+
+$(LIB):	$(OBJS) $(SOBJS)
+	$(AR) $(ARFLAGS) $@ $(OBJS)
+
+clean:
+	rm -f $(SOBJS) $(OBJS)
+
+distclean:	clean
+	rm -f $(LIB) core *.bak $(obj).depend
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/esd/pmc405de/chip_config.c b/board/esd/pmc405de/chip_config.c
new file mode 100644
index 0000000..e93a32c
--- /dev/null
+++ b/board/esd/pmc405de/chip_config.c
@@ -0,0 +1,61 @@
+/*
+ * (C) Copyright 2008-2009
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+#include <common.h>
+#include <asm/ppc4xx_config.h>
+
+struct ppc4xx_config ppc4xx_config_val[] = {
+	{
+		"133",
+		"CPU: 133 PLB: 133 OPB: 66 EBC: 44 PCI: 44/66",
+		{
+			0x19, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+			0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+			0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+			0x00, 0x40, 0x12, 0x12, 0x42, 0x3e, 0x00, 0x00
+		}
+	},
+	{
+		"266",
+		"CPU: 266 PLB: 133 OPB: 66 EBC: 44 PCI: 44/66",
+		{
+			0x19, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+			0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+			0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+			0x00, 0x50, 0x22, 0x2d, 0x42, 0x3e, 0x00, 0x00
+		}
+	},
+	{
+		"333",
+		"CPU: 333 PLB: 111 OPB: 55 EBC: 55 PCI: 55/111",
+		{
+			0x19, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+			0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+			0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+			0x00, 0x60, 0x29, 0x2d, 0x42, 0xbe, 0x00, 0x00
+		}
+	},
+};
+
+int ppc4xx_config_count = ARRAY_SIZE(ppc4xx_config_val);
diff --git a/board/esd/pmc405de/config.mk b/board/esd/pmc405de/config.mk
new file mode 100644
index 0000000..ae855dc
--- /dev/null
+++ b/board/esd/pmc405de/config.mk
@@ -0,0 +1,23 @@
+#
+# (C) Copyright 2000
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+TEXT_BASE = 0xFFFC0000
diff --git a/board/esd/pmc405de/pmc405de.c b/board/esd/pmc405de/pmc405de.c
new file mode 100644
index 0000000..f68e1b5
--- /dev/null
+++ b/board/esd/pmc405de/pmc405de.c
@@ -0,0 +1,521 @@
+/*
+ * (C) Copyright 2009
+ * Matthias Fuchs, esd gmbh germany, matthias.fuchs@esd.eu
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <libfdt.h>
+#include <fdt_support.h>
+#include <asm/processor.h>
+#include <asm/io.h>
+#include <asm/gpio.h>
+#include <asm/4xx_pci.h>
+#include <command.h>
+#include <malloc.h>
+
+/*
+ * PMC405-DE cpld registers
+ * - all registers are 8 bit
+ * - all registers are on 32 bit addesses
+ */
+struct pmc405de_cpld {
+	/* cpld design version */
+	u8 version;
+	u8 reserved0[3];
+
+	/* misc. status lines */
+	u8 status;
+	u8 reserved1[3];
+
+	/*
+	 * gated control flags
+	 * gate bit(s) must be written with '1' to
+	 * access control flag
+	 */
+	u8 control;
+	u8 reserved2[3];
+};
+
+#define CPLD_VERSION_MASK		0x0f
+#define CPLD_CONTROL_POSTLED_N		0x01
+#define CPLD_CONTROL_POSTLED_GATE	0x02
+#define CPLD_CONTROL_RESETOUT_N		0x40
+#define CPLD_CONTROL_RESETOUT_N_GATE	0x80
+
+DECLARE_GLOBAL_DATA_PTR;
+
+extern void __ft_board_setup(void *blob, bd_t *bd);
+extern void pll_write(u32 a, u32 b);
+
+static int wait_for_pci_ready_done;
+
+static int is_monarch(void);
+static int pci_is_66mhz(void);
+static int board_revision(void);
+static int cpld_revision(void);
+static void upd_plb_pci_div(u32 pllmr0, u32 pllmr1, u32 div);
+
+int board_early_init_f(void)
+{
+	u32 pllmr0, pllmr1;
+
+	/*
+	 * check M66EN and patch PLB:PCI divider for 66MHz PCI
+	 *
+	 * fCPU==333MHz && fPCI==66MHz (PLBDiv==3 && M66EN==1): PLB/PCI=1
+	 * fCPU==333MHz && fPCI==33MHz (PLBDiv==3 && M66EN==0): PLB/PCI=2
+	 * fCPU==133|266MHz && fPCI==66MHz (PLBDiv==1|2 && M66EN==1): PLB/PCI=2
+	 * fCPU==133|266MHz && fPCI==33MHz (PLBDiv==1|2 && M66EN==0): PLB/PCI=3
+	 *
+	 * calling upd_plb_pci_div() may end in calling pll_write() which will
+	 * do a chip reset and never return.
+	 */
+	pllmr0 = mfdcr(CPC0_PLLMR0);
+	pllmr1 = mfdcr(CPC0_PLLMR1);
+
+	if ((pllmr0 & PLLMR0_CPU_TO_PLB_MASK) == PLLMR0_CPU_PLB_DIV_3) {
+		/* fCPU=333MHz, fPLB=111MHz */
+		if (pci_is_66mhz())
+			upd_plb_pci_div(pllmr0, pllmr1, PLLMR0_PCI_PLB_DIV_1);
+		else
+			upd_plb_pci_div(pllmr0, pllmr1, PLLMR0_PCI_PLB_DIV_2);
+	} else {
+		/* fCPU=133|266MHz, fPLB=133MHz */
+		if (pci_is_66mhz())
+			upd_plb_pci_div(pllmr0, pllmr1, PLLMR0_PCI_PLB_DIV_2);
+		else
+			upd_plb_pci_div(pllmr0, pllmr1, PLLMR0_PCI_PLB_DIV_3);
+	}
+
+	/*
+	 * IRQ 25 (EXT IRQ 0) PCI-INTA#; active low; level sensitive
+	 * IRQ 26 (EXT IRQ 1) PCI-INTB#; active low; level sensitive
+	 * IRQ 27 (EXT IRQ 2) PCI-INTC#; active low; level sensitive
+	 * IRQ 28 (EXT IRQ 3) PCI-INTD#; active low; level sensitive
+	 * IRQ 29 (EXT IRQ 4) ETH0-PHY-IRQ#; active low; level sensitive
+	 * IRQ 30 (EXT IRQ 5) ETH1-PHY-IRQ#; active low; level sensitive
+	 * IRQ 31 (EXT IRQ 6) PLD-IRQ#; active low; level sensitive
+	 */
+	mtdcr(uicsr, 0xFFFFFFFF);       /* clear all ints */
+	mtdcr(uicer, 0x00000000);       /* disable all ints */
+	mtdcr(uiccr, 0x00000000);       /* set all to be non-critical*/
+	mtdcr(uicpr, 0xFFFFFF80);       /* set int polarities */
+	mtdcr(uictr, 0x10000000);       /* set int trigger levels */
+	mtdcr(uicvcr, 0x00000001);      /* set vect base=0, INT0 highest prio */
+	mtdcr(uicsr, 0xFFFFFFFF);       /* clear all ints */
+
+	/*
+	 * EBC Configuration Register:
+	 * - set ready timeout to 512 ebc-clks -> ca. 15 us
+	 * - EBC lines are always driven
+	 */
+	mtebc(epcr, 0xa8400000);
+
+	return 0;
+}
+
+static void upd_plb_pci_div(u32 pllmr0, u32 pllmr1, u32 div)
+{
+	if ((pllmr0 & PLLMR0_PCI_TO_PLB_MASK) != div)
+		pll_write((pllmr0 & ~PLLMR0_PCI_TO_PLB_MASK) | div, pllmr1);
+}
+
+int misc_init_r(void)
+{
+	int i;
+	struct ppc4xx_gpio *gpio0 = (struct ppc4xx_gpio *)GPIO_BASE;
+	struct pmc405de_cpld *cpld =
+		(struct pmc405de_cpld *)CONFIG_SYS_CPLD_BASE;
+
+	if (!is_monarch()) {
+		/* PCI configuration done: release EREADY */
+		setbits_be32(&gpio0->or, CONFIG_SYS_GPIO_EREADY);
+		setbits_be32(&gpio0->tcr, CONFIG_SYS_GPIO_EREADY);
+	}
+
+	/* turn off POST LED */
+	out_8(&cpld->control,
+	      CPLD_CONTROL_POSTLED_N | CPLD_CONTROL_POSTLED_GATE);
+
+	/* turn on LEDs: RUN, A, B */
+	clrbits_be32(&gpio0->or,
+		     CONFIG_SYS_GPIO_LEDRUN_N |
+		     CONFIG_SYS_GPIO_LEDA_N |
+		     CONFIG_SYS_GPIO_LEDB_N);
+
+	for (i=0; i < 200; i++)
+		udelay(1000);
+
+	/* turn off LEDs: A, B */
+	setbits_be32(&gpio0->or,
+		     CONFIG_SYS_GPIO_LEDA_N |
+		     CONFIG_SYS_GPIO_LEDB_N);
+
+	return (0);
+}
+
+static int is_monarch(void)
+{
+	struct ppc4xx_gpio *gpio0 = (struct ppc4xx_gpio *)GPIO_BASE;
+	return (in_be32(&gpio0->ir) & CONFIG_SYS_GPIO_MONARCH_N) == 0;
+}
+
+static int pci_is_66mhz(void)
+{
+	struct ppc4xx_gpio *gpio0 = (struct ppc4xx_gpio *)GPIO_BASE;
+	return (in_be32(&gpio0->ir) & CONFIG_SYS_GPIO_M66EN);
+}
+
+static int board_revision(void)
+{
+	struct ppc4xx_gpio *gpio0 = (struct ppc4xx_gpio *)GPIO_BASE;
+	return ((in_be32(&gpio0->ir) & CONFIG_SYS_GPIO_HWREV_MASK) >>
+		CONFIG_SYS_GPIO_HWREV_SHIFT);
+}
+
+static int cpld_revision(void)
+{
+	struct pmc405de_cpld *cpld =
+		(struct pmc405de_cpld *)CONFIG_SYS_CPLD_BASE;
+	return ((in_8(&cpld->version) & CPLD_VERSION_MASK));
+}
+
+/*
+ * Check Board Identity
+ */
+int checkboard(void)
+{
+	puts("Board: esd GmbH - PMC-CPU/405-DE");
+
+	gd->board_type = board_revision();
+	printf(", Rev 1.%ld, ", gd->board_type);
+
+	if (!is_monarch())
+		puts("non-");
+
+	printf("monarch, PCI=%s MHz, PLD-Rev 1.%d\n",
+	       pci_is_66mhz() ? "66" : "33", cpld_revision());
+
+	return 0;
+}
+
+
+static void wait_for_pci_ready(void)
+{
+	struct ppc4xx_gpio *gpio0 = (struct ppc4xx_gpio *)GPIO_BASE;
+	int i;
+	char *s = getenv("pcidelay");
+
+	/* only wait once */
+	if (wait_for_pci_ready_done)
+		return;
+
+	/*
+	 * We have our own handling of the pcidelay variable.
+	 * Using CONFIG_PCI_BOOTDELAY enables pausing for host
+	 * and adapter devices. For adapter devices we do not
+	 * want this.
+	 */
+	if (s) {
+		int ms = simple_strtoul(s, NULL, 10);
+		printf("PCI:   Waiting for %d ms\n", ms);
+		for (i=0; i<ms; i++)
+			udelay(1000);
+	}
+
+	if (!(in_be32(&gpio0->ir) & CONFIG_SYS_GPIO_EREADY)) {
+		printf("PCI:   Waiting for EREADY (CTRL-C to skip) ... ");
+		while (1) {
+			if (ctrlc()) {
+				puts("abort\n");
+				break;
+			}
+			if (in_be32(&gpio0->ir) & CONFIG_SYS_GPIO_EREADY) {
+				printf("done\n");
+				break;
+			}
+		}
+	}
+
+	wait_for_pci_ready_done = 1;
+}
+
+/*
+ * Overwrite weak is_pci_host()
+ *
+ * This routine is called to determine if a pci scan should be
+ * performed. With various hardware environments (especially cPCI and
+ * PPMC) it's insufficient to depend on the state of the arbiter enable
+ * bit in the strap register, or generic host/adapter assumptions.
+ *
+ * Return 0 for adapter mode, non-zero for host (monarch) mode.
+ */
+int is_pci_host(struct pci_controller *hose)
+{
+	char *s;
+
+	if (!is_monarch()) {
+		/*
+		 * Overwrite PCI identification when running in
+		 * non-monarch mode
+		 * This should be moved into pci_target_init()
+		 * when it is sometimes available for 405 CPUs
+		 */
+		pci_write_config_word(PCIDEVID_405GP,
+				      PCI_SUBSYSTEM_ID,
+				      CONFIG_SYS_PCI_SUBSYS_ID_NONMONARCH);
+		pci_write_config_word(PCIDEVID_405GP,
+				      PCI_CLASS_SUB_CODE,
+				      CONFIG_SYS_PCI_CLASSCODE_NONMONARCH);
+	}
+
+	s = getenv("pciscan");
+	if (s == NULL) {
+		if (is_monarch()) {
+			wait_for_pci_ready();
+			return 1;
+		} else {
+			return 0;
+		}
+	} else {
+		if (!strcmp(s, "yes"))
+			return 1;
+	}
+
+	return 0;
+}
+
+/*
+ * Overwrite weak pci_pre_init()
+ *
+ * The default implementation enables the 405EP
+ * internal PCI arbiter. We do not want that
+ * on a PMC module.
+ */
+int pci_pre_init(struct pci_controller *hose)
+{
+	return 1;
+}
+
+#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
+void ft_board_setup(void *blob, bd_t *bd)
+{
+	int rc;
+
+	__ft_board_setup(blob, bd);
+
+	/*
+	 * Disable PCI in non-monarch mode.
+	 */
+	if (!is_monarch()) {
+		rc = fdt_find_and_setprop(blob, "/plb/pci@ec000000", "status",
+					  "disabled", sizeof("disabled"), 1);
+		if (rc) {
+			printf("Unable to update property status in PCI node, "
+			       "err=%s\n",
+			       fdt_strerror(rc));
+		}
+	}
+}
+#endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */
+
+#if defined(CONFIG_SYS_EEPROM_WREN)
+/* Input: <dev_addr>  I2C address of EEPROM device to enable.
+ *         <state>     -1: deliver current state
+ *                      0: disable write
+ *                      1: enable write
+ * Returns:            -1: wrong device address
+ *                      0: dis-/en- able done
+ *                    0/1: current state if <state> was -1.
+ */
+int eeprom_write_enable(unsigned dev_addr, int state)
+{
+	struct ppc4xx_gpio *gpio0 = (struct ppc4xx_gpio *)GPIO_BASE;
+
+	if (CONFIG_SYS_I2C_EEPROM_ADDR != dev_addr) {
+		return -1;
+	} else {
+		switch (state) {
+		case 1:
+			/* Enable write access, clear bit GPIO0. */
+			clrbits_be32(&gpio0->or, CONFIG_SYS_GPIO_EEPROM_WP);
+			state = 0;
+			break;
+		case 0:
+			/* Disable write access, set bit GPIO0. */
+			setbits_be32(&gpio0->or, CONFIG_SYS_GPIO_EEPROM_WP);
+			state = 0;
+			break;
+		default:
+			/* Read current status back. */
+			state = (0 == (in_be32(&gpio0->or) &
+				       CONFIG_SYS_GPIO_EEPROM_WP));
+			break;
+		}
+	}
+	return state;
+}
+
+int do_eep_wren(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+	int query = argc == 1;
+	int state = 0;
+
+	if (query) {
+		/* Query write access state. */
+		state = eeprom_write_enable(CONFIG_SYS_I2C_EEPROM_ADDR, - 1);
+		if (state < 0) {
+			puts("Query of write access state failed.\n");
+		} else {
+			printf("Write access for device 0x%0x is %sabled.\n",
+				CONFIG_SYS_I2C_EEPROM_ADDR,
+				state ? "en" : "dis");
+			state = 0;
+		}
+	} else {
+		if ('0' == argv[1][0]) {
+			/* Disable write access. */
+			state = eeprom_write_enable(
+				CONFIG_SYS_I2C_EEPROM_ADDR, 0);
+		} else {
+			/* Enable write access. */
+			state = eeprom_write_enable(
+				CONFIG_SYS_I2C_EEPROM_ADDR, 1);
+		}
+		if (state < 0)
+			puts ("Setup of write access state failed.\n");
+	}
+
+	return state;
+}
+
+U_BOOT_CMD(eepwren, 2, 0, do_eep_wren,
+	"Enable / disable / query EEPROM write access",
+	""
+);
+#endif /* #if defined(CONFIG_SYS_EEPROM_WREN) */
+
+#if defined(CONFIG_PRAM)
+#include <environment.h>
+extern env_t *env_ptr;
+
+int do_painit(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+	u32 pram, nextbase, base;
+	char *v;
+	u32 param;
+	ulong *lptr;
+
+	v = getenv("pram");
+	if (v)
+		pram = simple_strtoul(v, NULL, 10);
+	else {
+		printf("Error: pram undefined. Please define pram in KiB\n");
+		return 1;
+	}
+
+	base = gd->bd->bi_memsize;
+#if defined(CONFIG_LOGBUFFER)
+	base -= LOGBUFF_LEN + LOGBUFF_OVERHEAD;
+#endif
+	/*
+	 * gd->bd->bi_memsize == physical ram size - CONFIG_SYS_MM_TOP_HIDE
+	 */
+	param = base - (pram << 10);
+	printf("PARAM: @%08x\n", param);
+	debug("memsize=0x%08x, base=0x%08x\n", gd->bd->bi_memsize, base);
+
+	/* clear entire PA ram */
+	memset((void*)param, 0, (pram << 10));
+
+	/* reserve 4k for pointer field */
+	nextbase = base - 4096;
+	lptr = (ulong*)(base);
+
+	/*
+	 * *(--lptr) = item_size;
+	 * *(--lptr) = base - item_base = distance from field top;
+	 */
+
+	/* env is first (4k aligned) */
+	nextbase -= ((CONFIG_ENV_SIZE + 4096 - 1) & ~(4096 - 1));
+	memcpy((void*)nextbase, env_ptr, CONFIG_ENV_SIZE);
+	*(--lptr) = CONFIG_ENV_SIZE;     /* size */
+	*(--lptr) = base - nextbase;  /* offset | type=0 */
+
+	/* free section */
+	*(--lptr) = nextbase - param; /* size */
+	*(--lptr) = (base - param) | 126; /* offset | type=126 */
+
+	/* terminate pointer field */
+	*(--lptr) = crc32(0, (void*)(base - 0x10), 0x10);
+	*(--lptr) = 0;                /* offset=0 -> terminator */
+	return 0;
+}
+U_BOOT_CMD(
+	painit,	1,	1,	do_painit,
+	"prepare PciAccess system",
+	""
+);
+#endif /* CONFIG_PRAM */
+
+int do_selfreset(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+	struct ppc4xx_gpio *gpio0 = (struct ppc4xx_gpio *)GPIO_BASE;
+	setbits_be32(&gpio0->tcr, CONFIG_SYS_GPIO_SELFRST_N);
+	return 0;
+}
+U_BOOT_CMD(
+	selfreset,	1,	1,	do_selfreset,
+	"assert self-reset# signal",
+	""
+);
+
+int do_resetout(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+	struct pmc405de_cpld *cpld =
+		(struct pmc405de_cpld *)CONFIG_SYS_CPLD_BASE;
+
+	if (argc > 1) {
+		if (argv[1][0] == '0') {
+			/* assert */
+			printf("PMC-RESETOUT# asserted\n");
+			out_8(&cpld->control,
+			      CPLD_CONTROL_RESETOUT_N_GATE);
+		} else {
+			/* deassert */
+			printf("PMC-RESETOUT# deasserted\n");
+			out_8(&cpld->control,
+			      CPLD_CONTROL_RESETOUT_N |
+			      CPLD_CONTROL_RESETOUT_N_GATE);
+		}
+	} else {
+		printf("PMC-RESETOUT# is %s\n",
+		       (in_8(&cpld->control) & CPLD_CONTROL_RESETOUT_N) ?
+		       "inactive" : "active");
+	}
+	return 0;
+}
+U_BOOT_CMD(
+	resetout,	2,	1,	do_resetout,
+	"assert PMC-RESETOUT# signal",
+	""
+);
diff --git a/board/esd/pmc405de/u-boot.lds b/board/esd/pmc405de/u-boot.lds
new file mode 100644
index 0000000..8c01016
--- /dev/null
+++ b/board/esd/pmc405de/u-boot.lds
@@ -0,0 +1,133 @@
+/*
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(powerpc)
+/* Do we need any of these for elf?
+   __DYNAMIC = 0;    */
+SECTIONS
+{
+  .resetvec 0xFFFFFFFC :
+  {
+    *(.resetvec)
+  } = 0xffff
+
+  /* Read-only sections, merged into text segment: */
+  . = + SIZEOF_HEADERS;
+  .interp : { *(.interp) }
+  .hash          : { *(.hash)		}
+  .dynsym        : { *(.dynsym)		}
+  .dynstr        : { *(.dynstr)		}
+  .rel.text      : { *(.rel.text)		}
+  .rela.text     : { *(.rela.text)	}
+  .rel.data      : { *(.rel.data)		}
+  .rela.data     : { *(.rela.data)	}
+  .rel.rodata    : { *(.rel.rodata)	}
+  .rela.rodata   : { *(.rela.rodata)	}
+  .rel.got       : { *(.rel.got)		}
+  .rela.got      : { *(.rela.got)		}
+  .rel.ctors     : { *(.rel.ctors)	}
+  .rela.ctors    : { *(.rela.ctors)	}
+  .rel.dtors     : { *(.rel.dtors)	}
+  .rela.dtors    : { *(.rela.dtors)	}
+  .rel.bss       : { *(.rel.bss)		}
+  .rela.bss      : { *(.rela.bss)		}
+  .rel.plt       : { *(.rel.plt)		}
+  .rela.plt      : { *(.rela.plt)		}
+  .init          : { *(.init)	}
+  .plt : { *(.plt) }
+  .text      :
+  {
+    cpu/ppc4xx/start.o	(.text)
+
+    *(.text)
+    *(.fixup)
+    *(.got1)
+  }
+  _etext = .;
+  PROVIDE (etext = .);
+  .rodata    :
+  {
+    *(.eh_frame)
+    *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
+  }
+  .fini      : { *(.fini)    } =0
+  .ctors     : { *(.ctors)   }
+  .dtors     : { *(.dtors)   }
+
+  /* Read-write section, merged into data segment: */
+  . = (. + 0x00FF) & 0xFFFFFF00;
+  _erotext = .;
+  PROVIDE (erotext = .);
+  .reloc   :
+  {
+    *(.got)
+    _GOT2_TABLE_ = .;
+    *(.got2)
+    _FIXUP_TABLE_ = .;
+    *(.fixup)
+  }
+  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
+  __fixup_entries = (. - _FIXUP_TABLE_)>>2;
+
+  .data    :
+  {
+    *(.data)
+    *(.data1)
+    *(.sdata)
+    *(.sdata2)
+    *(.dynamic)
+    CONSTRUCTORS
+  }
+  _edata  =  .;
+  PROVIDE (edata = .);
+
+  . = .;
+  __u_boot_cmd_start = .;
+  .u_boot_cmd : { *(.u_boot_cmd) }
+  __u_boot_cmd_end = .;
+
+
+  . = .;
+  __start___ex_table = .;
+  __ex_table : { *(__ex_table) }
+  __stop___ex_table = .;
+
+  . = ALIGN(256);
+  __init_begin = .;
+  .text.init : { *(.text.init) }
+  .data.init : { *(.data.init) }
+  . = ALIGN(256);
+  __init_end = .;
+
+  __bss_start = .;
+  .bss (NOLOAD)       :
+  {
+   *(.sbss) *(.scommon)
+   *(.dynbss)
+   *(.bss)
+   *(COMMON)
+   . = ALIGN(4);
+  }
+  _end = . ;
+  PROVIDE (end = .);
+}
diff --git a/board/esd/pmc440/pmc440.c b/board/esd/pmc440/pmc440.c
index 2ab944d..f22a1c2 100644
--- a/board/esd/pmc440/pmc440.c
+++ b/board/esd/pmc440/pmc440.c
@@ -142,7 +142,7 @@ int board_early_init_f(void)
 		reg |= CPR0_ICFG_RLI_MASK;
 		mtcpr(clk_icfg, reg);
 
-		mtspr(dbcr0, 0x20000000); /* do chip reset */
+		mtspr(SPRN_DBCR0, 0x20000000); /* do chip reset */
 	}
 
 	/*
diff --git a/board/gdsys/dlvision/Makefile b/board/gdsys/dlvision/Makefile
new file mode 100644
index 0000000..1270fea
--- /dev/null
+++ b/board/gdsys/dlvision/Makefile
@@ -0,0 +1,51 @@
+#
+# (C) Copyright 2007
+# Stefan Roese, DENX Software Engineering, sr@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= $(obj)lib$(BOARD).a
+
+COBJS	= $(BOARD).o
+SOBJS   =
+
+SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS	:= $(addprefix $(obj),$(COBJS))
+SOBJS	:= $(addprefix $(obj),$(SOBJS))
+
+$(LIB):	$(OBJS) $(SOBJS)
+	$(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+
+clean:
+	rm -f $(SOBJS) $(OBJS)
+
+distclean:	clean
+	rm -f $(LIB) core *.bak $(obj).depend
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/gdsys/dlvision/config.mk b/board/gdsys/dlvision/config.mk
new file mode 100644
index 0000000..1bdf5e4
--- /dev/null
+++ b/board/gdsys/dlvision/config.mk
@@ -0,0 +1,24 @@
+#
+# (C) Copyright 2000
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+TEXT_BASE = 0xFFFC0000
diff --git a/board/gdsys/dlvision/dlvision.c b/board/gdsys/dlvision/dlvision.c
new file mode 100644
index 0000000..4ec1cdb
--- /dev/null
+++ b/board/gdsys/dlvision/dlvision.c
@@ -0,0 +1,137 @@
+/*
+ * (C) Copyright 2009
+ * Dirk Eibach,  Guntermann & Drunck GmbH, eibach@gdsys.de
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <command.h>
+#include <asm/processor.h>
+#include <asm/io.h>
+#include <asm/gpio.h>
+
+enum {
+	HWTYPE_DLVISION_CPU = 0,
+	HWTYPE_DLVISION_CON = 1,
+};
+
+#define HWREV_100	6
+
+int board_early_init_f(void)
+{
+	mtdcr(uicsr, 0xFFFFFFFF);	/* clear all ints */
+	mtdcr(uicer, 0x00000000);	/* disable all ints */
+	mtdcr(uiccr, 0x00000000);	/* set all to be non-critical */
+	mtdcr(uicpr, 0xFFFFFF80);	/* set int polarities */
+	mtdcr(uictr, 0x10000000);	/* set int trigger levels */
+	mtdcr(uicvcr, 0x00000001);	/* set vect base=0,INT0 highest prio */
+	mtdcr(uicsr, 0xFFFFFFFF);	/* clear all ints */
+
+	/*
+	 * EBC Configuration Register: set ready timeout to 512 ebc-clks
+	 * -> ca. 15 us
+	 */
+	mtebc(epcr, 0xa8400000);	/* ebc always driven */
+
+	/*
+	 * setup io-latches
+	 */
+	out_le16((void *)CONFIG_SYS_LATCH_BASE, 0x00f0);
+	out_le16((void *)(CONFIG_SYS_LATCH_BASE + 0x100), 0x0002);
+	out_le16((void *)(CONFIG_SYS_LATCH_BASE + 0x200), 0x0000);
+	return 0;
+}
+
+int misc_init_r(void)
+{
+	/*
+	 * set "startup-finished"-gpios
+	 */
+	gpio_write_bit(21, 0);
+	gpio_write_bit(22, 1);
+
+	return 0;
+}
+
+/*
+ * Check Board Identity:
+ */
+int checkboard(void)
+{
+	char *s = getenv("serial#");
+	u8 channel2_msr = in_8((void *)CONFIG_UART_BASE + 0x26);
+	u8 channel3_msr = in_8((void *)CONFIG_UART_BASE + 0x36);
+	u8 channel7_msr = in_8((void *)CONFIG_UART_BASE + 0x76);
+	u8 unit_type;
+	u8 local_con;
+	u8 audio;
+	u8 hardware_version;
+
+	printf("Board: ");
+
+	unit_type = (channel2_msr & 0x80) ? 0x01 : 0x00;
+	local_con = (channel2_msr & 0x20) ? 0x01 : 0x00;
+	audio = (channel3_msr & 0x20) ? 0x01 : 0x00;
+	hardware_version =
+		  ((channel7_msr & 0x20) ? 0x01 : 0x00)
+		| ((channel7_msr & 0x80) ? 0x02 : 0x00)
+		| ((channel7_msr & 0x40) ? 0x04 : 0x00);
+
+	switch (unit_type) {
+	case HWTYPE_DLVISION_CON:
+		printf("DL-Vision-CON");
+		break;
+
+	case HWTYPE_DLVISION_CPU:
+		printf("DL-Vision-CPU");
+		break;
+
+	default:
+		printf("UnitType %d, unsupported", unit_type);
+		break;
+	}
+
+	if (s != NULL) {
+		puts(", serial# ");
+		puts(s);
+	}
+	puts("\n       ");
+
+	switch (hardware_version) {
+	case HWREV_100:
+		printf("HW-Ver 1.00");
+		break;
+
+	default:
+		printf("HW-Ver %d, unsupported",
+		       hardware_version);
+		break;
+	}
+
+	if (local_con)
+		printf(", local console");
+
+	if (audio)
+		printf(", audio support");
+
+	puts("\n");
+
+	return 0;
+}
diff --git a/board/gdsys/dlvision/u-boot.lds b/board/gdsys/dlvision/u-boot.lds
new file mode 100644
index 0000000..d803625
--- /dev/null
+++ b/board/gdsys/dlvision/u-boot.lds
@@ -0,0 +1,132 @@
+/*
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(powerpc)
+/* Do we need any of these for elf?
+   __DYNAMIC = 0;    */
+SECTIONS
+{
+  .resetvec 0xFFFFFFFC :
+  {
+    *(.resetvec)
+  } = 0xffff
+
+  /* Read-only sections, merged into text segment: */
+  . = + SIZEOF_HEADERS;
+  .interp : { *(.interp) }
+  .hash          : { *(.hash)		}
+  .dynsym        : { *(.dynsym)		}
+  .dynstr        : { *(.dynstr)		}
+  .rel.text      : { *(.rel.text)		}
+  .rela.text     : { *(.rela.text)	}
+  .rel.data      : { *(.rel.data)		}
+  .rela.data     : { *(.rela.data)	}
+  .rel.rodata    : { *(.rel.rodata)	}
+  .rela.rodata   : { *(.rela.rodata)	}
+  .rel.got       : { *(.rel.got)		}
+  .rela.got      : { *(.rela.got)		}
+  .rel.ctors     : { *(.rel.ctors)	}
+  .rela.ctors    : { *(.rela.ctors)	}
+  .rel.dtors     : { *(.rel.dtors)	}
+  .rela.dtors    : { *(.rela.dtors)	}
+  .rel.bss       : { *(.rel.bss)		}
+  .rela.bss      : { *(.rela.bss)		}
+  .rel.plt       : { *(.rel.plt)		}
+  .rela.plt      : { *(.rela.plt)		}
+  .init          : { *(.init)	}
+  .plt : { *(.plt) }
+  .text      :
+  {
+    cpu/ppc4xx/start.o	(.text)
+
+    *(.text)
+    *(.fixup)
+    *(.got1)
+  }
+  _etext = .;
+  PROVIDE (etext = .);
+  .rodata    :
+  {
+    *(.rodata)
+    *(.rodata1)
+    *(.rodata.str1.4)
+  }
+  .fini      : { *(.fini)    } =0
+  .ctors     : { *(.ctors)   }
+  .dtors     : { *(.dtors)   }
+
+  /* Read-write section, merged into data segment: */
+  . = (. + 0x00FF) & 0xFFFFFF00;
+  _erotext = .;
+  PROVIDE (erotext = .);
+  .reloc   :
+  {
+    *(.got)
+    _GOT2_TABLE_ = .;
+    *(.got2)
+    _FIXUP_TABLE_ = .;
+    *(.fixup)
+  }
+  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
+  __fixup_entries = (. - _FIXUP_TABLE_)>>2;
+
+  .data    :
+  {
+    *(.data)
+    *(.data1)
+    *(.sdata)
+    *(.sdata2)
+    *(.dynamic)
+    CONSTRUCTORS
+  }
+  _edata  =  .;
+  PROVIDE (edata = .);
+
+  . = .;
+  __u_boot_cmd_start = .;
+  .u_boot_cmd : { *(.u_boot_cmd) }
+  __u_boot_cmd_end = .;
+
+  . = .;
+  __start___ex_table = .;
+  __ex_table : { *(__ex_table) }
+  __stop___ex_table = .;
+
+  . = ALIGN(256);
+  __init_begin = .;
+  .text.init : { *(.text.init) }
+  .data.init : { *(.data.init) }
+  . = ALIGN(256);
+  __init_end = .;
+
+  __bss_start = .;
+  .bss (NOLOAD)       :
+  {
+   *(.sbss) *(.scommon)
+   *(.dynbss)
+   *(.bss)
+   *(COMMON)
+  }
+  _end = . ;
+  PROVIDE (end = .);
+}
diff --git a/board/mpl/mip405/mip405.c b/board/mpl/mip405/mip405.c
index 24caa46..1738f54 100644
--- a/board/mpl/mip405/mip405.c
+++ b/board/mpl/mip405/mip405.c
@@ -688,7 +688,7 @@ int misc_init_r (void)
 	start=get_timer(0);
 	/* if MIP405 has booted from PCI, reset CCR0[24] as described in errata PCI_18 */
 	if (mfdcr(strap) & PSR_ROM_LOC)
-	       mtspr(ccr0, (mfspr(ccr0) & ~0x80));
+	       mtspr(SPRN_CCR0, (mfspr(SPRN_CCR0) & ~0x80));
 
 	return (0);
 }
diff --git a/board/mpl/pip405/pip405.c b/board/mpl/pip405/pip405.c
index f31a5e8..677437d 100644
--- a/board/mpl/pip405/pip405.c
+++ b/board/mpl/pip405/pip405.c
@@ -669,7 +669,7 @@ int misc_init_r (void)
 
 	/* if PIP405 has booted from PCI, reset CCR0[24] as described in errata PCI_18 */
 	if (mfdcr(strap) & PSR_ROM_LOC)
-	       mtspr(ccr0, (mfspr(ccr0) & ~0x80));
+	       mtspr(SPRN_CCR0, (mfspr(SPRN_CCR0) & ~0x80));
 
 	return (0);
 }
diff --git a/board/netstal/hcu5/hcu5.c b/board/netstal/hcu5/hcu5.c
index 6f4ec29..5eb33d3 100644
--- a/board/netstal/hcu5/hcu5.c
+++ b/board/netstal/hcu5/hcu5.c
@@ -89,8 +89,8 @@ int board_early_init_f(void)
 		/*
 		 * Initiate system reset in debug control register DBCR
 		 */
-		dbcr = mfspr(dbcr0);
-		mtspr(dbcr0, dbcr | CHIP_RESET);
+		dbcr = mfspr(SPRN_DBCR0);
+		mtspr(SPRN_DBCR0, dbcr | CHIP_RESET);
 	}
 	mtsdr(SDR0_CP440, 0x0EAAEA02);  /* [Nto1] = 1*/
 #endif
@@ -307,14 +307,14 @@ int misc_init_r(void)
 	/* We cannot easily enable trace before, as there are other
 	 * routines messing around with sdr0_pfc1. And I do not need it.
 	 */
-	if (mfspr(dbcr0) & 0x80000000) {
+	if (mfspr(SPRN_DBCR0) & 0x80000000) {
 		/* External debugger alive
 		 * enable trace facilty for Lauterbach
 		 * CCR0[DTB]=0		Enable broadcast of trace information
 		 * SDR0_PFC0[TRE]	Trace signals are enabled instead of
 		 *			GPIO49-63
 		 */
-	        mtspr(ccr0, mfspr(ccr0)  &~ (CCR0_DTB));
+	        mtspr(SPRN_CCR0, mfspr(SPRN_CCR0)  &~ (CCR0_DTB));
 		mtsdr(SDR0_PFC0, sdr0_pfc1 | SDR0_PFC0_TRE_ENABLE);
 	}
 	return 0;
diff --git a/board/netstal/hcu5/sdram.c b/board/netstal/hcu5/sdram.c
index f59bd7d..5c2ec35 100644
--- a/board/netstal/hcu5/sdram.c
+++ b/board/netstal/hcu5/sdram.c
@@ -144,7 +144,7 @@ static void program_ecc(unsigned long start_address, unsigned long num_bytes)
 	u32 *magicPtr;
 	u32 magic;
 
-	if ((mfspr(dbcr0) & 0x80000000) == 0) {
+	if ((mfspr(SPRN_DBCR0) & 0x80000000) == 0) {
 		/* only if no external debugger is alive!
 		 * Check whether vxWorks is using EDR logging, if yes zero
 		 * also PostMortem and user reserved memory
@@ -182,7 +182,7 @@ static void program_ecc(unsigned long start_address, unsigned long num_bytes)
 	 * If not done, then we could get an interrupt later on when
 	 * exceptions are enabled.
 	 */
-	mtspr(mcsr, mfspr(mcsr));
+	mtspr(SPRN_MCSR, mfspr(SPRN_MCSR));
 
 	/* Set 'int_mask' parameter to functionnal value */
 	mfsdram(DDR0_01, val);
diff --git a/board/netstal/mcu25/mcu25.c b/board/netstal/mcu25/mcu25.c
index 66ed95f..67c1b0b 100644
--- a/board/netstal/mcu25/mcu25.c
+++ b/board/netstal/mcu25/mcu25.c
@@ -77,7 +77,7 @@ int board_early_init_f (void)
 	out32(GPIO0_OR,		CONFIG_SYS_GPIO0_OR );
 	out32(GPIO0_TCR,	CONFIG_SYS_GPIO0_TCR);
 	out32(GPIO0_ODR,	CONFIG_SYS_GPIO0_ODR);
-	mtspr(ccr0,      0x00700000);
+	mtspr(SPRN_CCR0,      0x00700000);
 
 	return 0;
 }
diff --git a/board/xpedite1k/Makefile b/board/xes/xpedite1000/Makefile
index 6ab1a26..b93f2c3 100644
--- a/board/xpedite1k/Makefile
+++ b/board/xes/xpedite1000/Makefile
@@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk
 
 LIB	= $(obj)lib$(BOARD).a
 
-COBJS	= $(BOARD).o flash.o
+COBJS	= $(BOARD).o
 SOBJS	= init.o
 
 SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
diff --git a/board/xpedite1k/config.mk b/board/xes/xpedite1000/config.mk
index 33dfbf1..33dfbf1 100644
--- a/board/xpedite1k/config.mk
+++ b/board/xes/xpedite1000/config.mk
diff --git a/board/xpedite1k/init.S b/board/xes/xpedite1000/init.S
index 8a04f4f..54371e2 100644
--- a/board/xpedite1k/init.S
+++ b/board/xes/xpedite1000/init.S
@@ -1,5 +1,5 @@
 /*
-*  Copyright (C) 2002 Scott McNutt <smcnutt@artesyncp.com>
+* Copyright (C) 2002 Scott McNutt <smcnutt@artesyncp.com>
 *
 * See file CREDITS for list of people who contributed to this
 * project.
@@ -24,62 +24,59 @@
 #include <config.h>
 
 /* General */
-#define TLB_VALID   0x00000200
+#define TLB_VALID	0x00000200
 
 /* Supported page sizes */
-
-#define SZ_1K	    0x00000000
-#define SZ_4K	    0x00000010
-#define SZ_16K	    0x00000020
-#define SZ_64K	    0x00000030
-#define SZ_256K	    0x00000040
-#define SZ_1M	    0x00000050
-#define SZ_16M	    0x00000070
-#define SZ_256M	    0x00000090
+#define SZ_1K		0x00000000
+#define SZ_4K		0x00000010
+#define SZ_16K		0x00000020
+#define SZ_64K		0x00000030
+#define SZ_256K		0x00000040
+#define SZ_1M		0x00000050
+#define SZ_16M		0x00000070
+#define SZ_256M		0x00000090
 
 /* Storage attributes */
-#define SA_W	    0x00000800	    /* Write-through */
-#define SA_I	    0x00000400	    /* Caching inhibited */
-#define SA_M	    0x00000200	    /* Memory coherence */
-#define SA_G	    0x00000100	    /* Guarded */
-#define SA_E	    0x00000080	    /* Endian */
+#define SA_W		0x00000800	/* Write-through */
+#define SA_I		0x00000400	/* Caching inhibited */
+#define SA_M		0x00000200	/* Memory coherence */
+#define SA_G		0x00000100	/* Guarded */
+#define SA_E		0x00000080	/* Endian */
 
 /* Access control */
-#define AC_X	    0x00000024	    /* Execute */
-#define AC_W	    0x00000012	    /* Write */
-#define AC_R	    0x00000009	    /* Read */
+#define AC_X		0x00000024	/* Execute */
+#define AC_W		0x00000012	/* Write */
+#define AC_R		0x00000009	/* Read */
 
 /* Some handy macros */
-
 #define EPN(e)		((e) & 0xfffffc00)
-#define TLB0(epn,sz)	( (EPN((epn)) | (sz) | TLB_VALID ) )
-#define TLB1(rpn,erpn)	( ((rpn)&0xfffffc00) | (erpn) )
-#define TLB2(a)		( (a)&0x00000fbf )
+#define TLB0(epn,sz)	((EPN((epn)) | (sz) | TLB_VALID ))
+#define TLB1(rpn,erpn)	(((rpn)&0xfffffc00) | (erpn))
+#define TLB2(a)		((a)&0x00000fbf)
 
-#define tlbtab_start\
-	mflr    r1  ;\
-	bl 0f	    ;
+#define tlbtab_start	\
+	mflr	r1;	\
+	bl 0f;
 
-#define tlbtab_end\
-	.long 0, 0, 0	;   \
-0:	mflr    r0	;   \
-	mtlr    r1	;   \
-	blr		;
+#define tlbtab_end	\
+	.long 0, 0, 0;	\
+0:	mflr	r0;	\
+	mtlr	r1;	\
+	blr;
 
 #define tlbentry(epn,sz,rpn,erpn,attr)\
 	.long TLB0(epn,sz),TLB1(rpn,erpn),TLB2(attr)
 
 
-/**************************************************************************
+/*
  * TLB TABLE
  *
  * This table is used by the cpu boot code to setup the initial tlb
  * entries. Rather than make broad assumptions in the cpu source tree,
  * this table lets each board set things up however they like.
  *
- *  Pointer to the table is returned in r1
- *
- *************************************************************************/
+ * Pointer to the table is returned in r1
+ */
 
 	.section .bootpg,"ax"
 	.globl tlbtab
diff --git a/board/xpedite1k/u-boot.lds b/board/xes/xpedite1000/u-boot.lds
index c8f9646..46b52fc 100644
--- a/board/xpedite1k/u-boot.lds
+++ b/board/xes/xpedite1000/u-boot.lds
@@ -66,7 +66,7 @@ SECTIONS
     /* the sector layout of our flash chips!	XXX FIXME XXX	*/
 
     cpu/ppc4xx/start.o	(.text)
-    board/xpedite1k/init.o	(.text)
+    board/xes/xpedite1000/init.o	(.text)
     cpu/ppc4xx/kgdb.o	(.text)
     cpu/ppc4xx/traps.o	(.text)
     cpu/ppc4xx/interrupts.o	(.text)
@@ -78,9 +78,6 @@ SECTIONS
     lib_ppc/extable.o	(.text)
     lib_generic/zlib.o		(.text)
 
-/*    . = env_offset;*/
-/*    common/env_embedded.o(.text)*/
-
     *(.text)
     *(.fixup)
     *(.got1)
diff --git a/board/xpedite1k/u-boot.lds.debug b/board/xes/xpedite1000/u-boot.lds.debug
index 5824cd9..68cd72d 100644
--- a/board/xpedite1k/u-boot.lds.debug
+++ b/board/xes/xpedite1000/u-boot.lds.debug
@@ -56,7 +56,7 @@ SECTIONS
     /* the sector layout of our flash chips!	XXX FIXME XXX	*/
 
     cpu/ppc4xx/start.o	(.text)
-    board/xpedite1k/init.o (.text)
+    board/xes/xpedite1000/init.o (.text)
     cpu/ppc4xx/kgdb.o	(.text)
     cpu/ppc4xx/traps.o	(.text)
     cpu/ppc4xx/interrupts.o	(.text)
diff --git a/board/xes/xpedite1000/xpedite1000.c b/board/xes/xpedite1000/xpedite1000.c
new file mode 100644
index 0000000..4529b7e
--- /dev/null
+++ b/board/xes/xpedite1000/xpedite1000.c
@@ -0,0 +1,244 @@
+/*
+ * Copyright (C) 2003 Travis B. Sawyer <travis.sawyer@sandburst.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/processor.h>
+#include <spd_sdram.h>
+#include <i2c.h>
+#include <net.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int board_early_init_f(void)
+{
+	unsigned long sdrreg;
+
+	/*
+	 * Enable GPIO for pins 18 - 24
+	 * 18 = SEEPROM_WP
+	 * 19 = #M_RST
+	 * 20 = #MONARCH
+	 * 21 = #LED_ALARM
+	 * 22 = #LED_ACT
+	 * 23 = #LED_STATUS1
+	 * 24 = #LED_STATUS2
+	 */
+	mfsdr(sdr_pfc0, sdrreg);
+	mtsdr(sdr_pfc0, (sdrreg & ~SDR0_PFC0_TRE_ENABLE) | 0x00003e00);
+	out32(CONFIG_SYS_GPIO_BASE + 0x018, (USR_LED0 | USR_LED1 | USR_LED2 | USR_LED3));
+	LED0_OFF();
+	LED1_OFF();
+	LED2_OFF();
+	LED3_OFF();
+
+	/* Setup the external bus controller/chip selects */
+	mtebc(pb0ap, 0x04055200);	/* 16MB Strata FLASH */
+	mtebc(pb0cr, 0xff098000);	/* BAS=0xff0 16MB R/W 8-bit */
+	mtebc(pb1ap, 0x04055200);	/* 512KB Socketed AMD FLASH */
+	mtebc(pb1cr, 0xfe018000);	/* BAS=0xfe0 1MB R/W 8-bit */
+	mtebc(pb6ap, 0x05006400);	/* 32-64MB AMD MirrorBit FLASH */
+	mtebc(pb6cr, 0xf00da000);	/* BAS=0xf00 64MB R/W i6-bit */
+	mtebc(pb7ap, 0x05006400);	/* 32-64MB AMD MirrorBit FLASH */
+	mtebc(pb7cr, 0xf40da000);	/* BAS=0xf40 64MB R/W 16-bit */
+
+	/*
+	 * Setup the interrupt controller polarities, triggers, etc.
+	 *
+	 * Because of the interrupt handling rework to handle 440GX interrupts
+	 * with the common code, we needed to change names of the UIC registers.
+	 * Here the new relationship:
+	 *
+	 * U-Boot name	440GX name
+	 * -----------------------
+	 * UIC0		UICB0
+	 * UIC1		UIC0
+	 * UIC2		UIC1
+	 * UIC3		UIC2
+	 */
+	mtdcr(uic1sr, 0xffffffff);	/* clear all */
+	mtdcr(uic1er, 0x00000000);	/* disable all */
+	mtdcr(uic1cr, 0x00000003);	/* SMI & UIC1 crit are critical */
+	mtdcr(uic1pr, 0xfffffe00);	/* per ref-board manual */
+	mtdcr(uic1tr, 0x01c00000);	/* per ref-board manual */
+	mtdcr(uic1vr, 0x00000001);	/* int31 highest, base=0x000 */
+	mtdcr(uic1sr, 0xffffffff);	/* clear all */
+
+	mtdcr(uic2sr, 0xffffffff);	/* clear all */
+	mtdcr(uic2er, 0x00000000);	/* disable all */
+	mtdcr(uic2cr, 0x00000000);	/* all non-critical */
+	mtdcr(uic2pr, 0xffffc0ff);	/* per ref-board manual */
+	mtdcr(uic2tr, 0x00ff8000);	/* per ref-board manual */
+	mtdcr(uic2vr, 0x00000001);	/* int31 highest, base=0x000 */
+	mtdcr(uic2sr, 0xffffffff);	/* clear all */
+
+	mtdcr(uic3sr, 0xffffffff);	/* clear all */
+	mtdcr(uic3er, 0x00000000);	/* disable all */
+	mtdcr(uic3cr, 0x00000000);	/* all non-critical */
+	mtdcr(uic3pr, 0xffffffff);	/* per ref-board manual */
+	mtdcr(uic3tr, 0x00ff8c0f);	/* per ref-board manual */
+	mtdcr(uic3vr, 0x00000001);	/* int31 highest, base=0x000 */
+	mtdcr(uic3sr, 0xffffffff);	/* clear all */
+
+	mtdcr(uic0sr, 0xfc000000);	/* clear all */
+	mtdcr(uic0er, 0x00000000);	/* disable all */
+	mtdcr(uic0cr, 0x00000000);	/* all non-critical */
+	mtdcr(uic0pr, 0xfc000000);	/* */
+	mtdcr(uic0tr, 0x00000000);	/* */
+	mtdcr(uic0vr, 0x00000001);	/* */
+
+	LED0_ON();
+
+	return 0;
+}
+
+int checkboard(void)
+{
+	char *s;
+
+	printf("Board: X-ES %s PMC SBC\n", CONFIG_SYS_BOARD_NAME);
+	printf("       ");
+	s = getenv("board_rev");
+	if (s)
+		printf("Rev %s, ", s);
+	s = getenv("serial#");
+	if (s)
+		printf("Serial# %s, ", s);
+	s = getenv("board_cfg");
+	if (s)
+		printf("Cfg %s", s);
+	printf("\n");
+
+	return 0;
+}
+
+phys_size_t initdram(int board_type)
+{
+	return spd_sdram();
+}
+
+/*
+ * This routine is called just prior to registering the hose and gives
+ * the board the opportunity to check things. Returning a value of zero
+ * indicates that things are bad & PCI initialization should be aborted.
+ *
+ * Different boards may wish to customize the pci controller structure
+ * (add regions, override default access routines, etc) or perform
+ * certain pre-initialization actions.
+ */
+
+#if defined(CONFIG_PCI)
+int pci_pre_init(struct pci_controller * hose)
+{
+	unsigned long strap;
+
+	/* See if we're supposed to setup the pci */
+	mfsdr(sdr_sdstp1, strap);
+	if ((strap & 0x00010000) == 0)
+		return 0;
+
+#if defined(CONFIG_SYS_PCI_FORCE_PCI_CONV)
+	/* Setup System Device Register PCIX0_XCR */
+	mfsdr(sdr_xcr, strap);
+	strap &= 0x0f000000;
+	mtsdr(sdr_xcr, strap);
+#endif
+
+	return 1;
+}
+#endif /* defined(CONFIG_PCI) */
+
+#if defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT)
+/*
+ * The bootstrap configuration provides default settings for the pci
+ * inbound map (PIM). But the bootstrap config choices are limited and
+ * may not be sufficient for a given board.
+ */
+void pci_target_init(struct pci_controller * hose)
+{
+	/* Disable everything */
+	out32r(PCIX0_PIM0SA, 0);
+	out32r(PCIX0_PIM1SA, 0);
+	out32r(PCIX0_PIM2SA, 0);
+	out32r(PCIX0_EROMBA, 0); /* disable expansion rom */
+
+	/*
+	 * Map all of SDRAM to PCI address 0x0000_0000. Note that the 440 strapping
+	 * options to not support sizes such as 128/256 MB.
+	 */
+	out32r(PCIX0_PIM0LAL, CONFIG_SYS_SDRAM_BASE);
+	out32r(PCIX0_PIM0LAH, 0);
+	out32r(PCIX0_PIM0SA, ~(gd->ram_size - 1) | 1);
+
+	out32r(PCIX0_BAR0, 0);
+
+	/* Program the board's subsystem id/vendor id */
+	out16r(PCIX0_SBSYSVID, CONFIG_SYS_PCI_SUBSYS_VENDORID);
+	out16r(PCIX0_SBSYSID, CONFIG_SYS_PCI_SUBSYS_DEVICEID);
+
+	out16r(PCIX0_CMD, in16r(PCIX0_CMD) | PCI_COMMAND_MEMORY);
+}
+#endif /* defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT) */
+
+#if defined(CONFIG_PCI)
+/*
+ * This routine is called to determine if a pci scan should be
+ * performed. With various hardware environments (especially cPCI and
+ * PPMC) it's insufficient to depend on the state of the arbiter enable
+ * bit in the strap register, or generic host/adapter assumptions.
+ *
+ * Rather than hard-code a bad assumption in the general 440 code, the
+ * 440 pci code requires the board to decide at runtime.
+ *
+ * Return 0 for adapter mode, non-zero for host (monarch) mode.
+ */
+int is_pci_host(struct pci_controller *hose)
+{
+	return ((in32(CONFIG_SYS_GPIO_BASE + 0x1C) & 0x00000800) == 0);
+}
+#endif /* defined(CONFIG_PCI) */
+
+#ifdef CONFIG_POST
+/*
+ * Returns 1 if keys pressed to start the power-on long-running tests
+ * Called from board_init_f().
+ */
+int post_hotkeys_pressed(void)
+{
+	return ctrlc();
+}
+
+void post_word_store(ulong a)
+{
+	volatile ulong *save_addr =
+		(volatile ulong *)(CONFIG_SYS_POST_WORD_ADDR);
+
+	*save_addr = a;
+}
+
+ulong post_word_load(void)
+{
+	volatile ulong *save_addr =
+		(volatile ulong *)(CONFIG_SYS_POST_WORD_ADDR);
+
+	return *save_addr;
+}
+#endif
diff --git a/board/xpedite1k/flash.c b/board/xpedite1k/flash.c
deleted file mode 100644
index 0711931..0000000
--- a/board/xpedite1k/flash.c
+++ /dev/null
@@ -1,607 +0,0 @@
-/*
- * (C) Copyright 2002-2004
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * (C) Copyright 2002 Jun Gu <jung@artesyncp.com>
- * Add support for Am29F016D and dynamic switch setting.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * Modified 4/5/2001
- * Wait for completion of each sector erase command issued
- * 4/5/2001
- * Chris Hallinan - DS4.COM, Inc. - clh@net1plus.com
- */
-
-/*
- * Ported to XPedite1000, 1/2 mb boot flash only
- * Travis B. Sawyer, <travis.sawyer@sandburst.com>
- */
-
-#include <common.h>
-#include <ppc4xx.h>
-#include <asm/processor.h>
-
-
-#undef DEBUG
-#ifdef DEBUG
-#define DEBUGF(x...) printf(x)
-#else
-#define DEBUGF(x...)
-#endif /* DEBUG */
-
-#define BOOT_SMALL_FLASH	32		/* 00100000 */
-#define FLASH_ONBD_N		2		/* 00000010 */
-#define FLASH_SRAM_SEL		1		/* 00000001 */
-
-#define BOOT_SMALL_FLASH_VAL	4
-#define FLASH_ONBD_N_VAL	2
-#define FLASH_SRAM_SEL_VAL	1
-
-
-flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
-
-static unsigned long flash_addr_table[8][CONFIG_SYS_MAX_FLASH_BANKS] = {
-	{0xfff80000},	/* 0:000: configuraton 3 */
-	{0xfff90000},	/* 1:001: configuraton 4 */
-	{0xfffa0000},	/* 2:010: configuraton 7 */
-	{0xfffb0000},	/* 3:011: configuraton 8 */
-	{0xfffc0000},	/* 4:100: configuraton 1 */
-	{0xfffd0000},	/* 5:101: configuraton 2 */
-	{0xfffe0000},	/* 6:110: configuraton 5 */
-	{0xffff0000}	/* 7:111: configuraton 6 */
-};
-
-/*-----------------------------------------------------------------------
- * Functions
- */
-static ulong flash_get_size (vu_long *addr, flash_info_t *info);
-static int write_word (flash_info_t *info, ulong dest, ulong data);
-
-
-#ifdef CONFIG_XPEDITE1K
-#define ADDR0		0x5555
-#define ADDR1		0x2aaa
-#define FLASH_WORD_SIZE unsigned char
-#endif
-
-/*-----------------------------------------------------------------------
- */
-
-unsigned long flash_init (void)
-{
-	unsigned long total_b = 0;
-	unsigned long size_b[CONFIG_SYS_MAX_FLASH_BANKS];
-	unsigned short index = 0;
-	int i;
-
-
-	DEBUGF("\n");
-	DEBUGF("FLASH: Index: %d\n", index);
-
-	/* Init: no FLASHes known */
-	for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
-		flash_info[i].flash_id = FLASH_UNKNOWN;
-		flash_info[i].sector_count = -1;
-		flash_info[i].size = 0;
-
-		/* check whether the address is 0 */
-		if (flash_addr_table[index][i] == 0) {
-			continue;
-		}
-
-		/* call flash_get_size() to initialize sector address */
-		size_b[i] = flash_get_size(
-			(vu_long *)flash_addr_table[index][i], &flash_info[i]);
-		flash_info[i].size = size_b[i];
-		if (flash_info[i].flash_id == FLASH_UNKNOWN) {
-			printf ("## Unknown FLASH on Bank %d - Size = 0x%08lx = %ld MB\n",
-				i, size_b[i], size_b[i]<<20);
-			flash_info[i].sector_count = -1;
-			flash_info[i].size = 0;
-		}
-
-		total_b += flash_info[i].size;
-	}
-
-	return total_b;
-}
-
-
-/*-----------------------------------------------------------------------
- */
-void flash_print_info  (flash_info_t *info)
-{
-	int i;
-	int k;
-	int size;
-	int erased;
-	volatile unsigned long *flash;
-
-	if (info->flash_id == FLASH_UNKNOWN) {
-		printf ("missing or unknown FLASH type\n");
-		return;
-	}
-
-	switch (info->flash_id & FLASH_VENDMASK) {
-	case FLASH_MAN_AMD:	printf ("AMD ");		break;
-	case FLASH_MAN_FUJ:	printf ("FUJITSU ");		break;
-	case FLASH_MAN_SST:	printf ("SST ");		break;
-	default:		printf ("Unknown Vendor ");	break;
-	}
-
-	switch (info->flash_id & FLASH_TYPEMASK) {
-	case FLASH_AMD016:	printf ("AM29F016D (16 Mbit, uniform sector size)\n");
-		break;
-	case FLASH_AM040:	printf ("AM29F040 (512 Kbit, uniform sector size)\n");
-		break;
-	case FLASH_AM400B:	printf ("AM29LV400B (4 Mbit, bottom boot sect)\n");
-		break;
-	case FLASH_AM400T:	printf ("AM29LV400T (4 Mbit, top boot sector)\n");
-		break;
-	case FLASH_AM800B:	printf ("AM29LV800B (8 Mbit, bottom boot sect)\n");
-		break;
-	case FLASH_AM800T:	printf ("AM29LV800T (8 Mbit, top boot sector)\n");
-		break;
-	case FLASH_AM160B:	printf ("AM29LV160B (16 Mbit, bottom boot sect)\n");
-		break;
-	case FLASH_AM160T:	printf ("AM29LV160T (16 Mbit, top boot sector)\n");
-		break;
-	case FLASH_AM320B:	printf ("AM29LV320B (32 Mbit, bottom boot sect)\n");
-		break;
-	case FLASH_AM320T:	printf ("AM29LV320T (32 Mbit, top boot sector)\n");
-		break;
-	case FLASH_SST800A:	printf ("SST39LF/VF800 (8 Mbit, uniform sector size)\n");
-		break;
-	case FLASH_SST160A:	printf ("SST39LF/VF160 (16 Mbit, uniform sector size)\n");
-		break;
-	default:		printf ("Unknown Chip Type\n");
-		break;
-	}
-
-	printf ("  Size: %ld KB in %d Sectors\n",
-		info->size >> 10, info->sector_count);
-
-	printf ("  Sector Start Addresses:");
-	for (i=0; i<info->sector_count; ++i) {
-		/*
-		 * Check if whole sector is erased
-		 */
-		if (i != (info->sector_count-1))
-			size = info->start[i+1] - info->start[i];
-		else
-			size = info->start[0] + info->size - info->start[i];
-		erased = 1;
-		flash = (volatile unsigned long *)info->start[i];
-		size = size >> 2;	 /* divide by 4 for longword access */
-		for (k=0; k<size; k++)
-		{
-			if (*flash++ != 0xffffffff)
-			{
-				erased = 0;
-				break;
-			}
-		}
-
-		if ((i % 5) == 0)
-			printf ("\n   ");
-			printf (" %08lX%s%s",
-				info->start[i],
-				erased ? " E" : "  ",
-				info->protect[i] ? "RO " : "   "
-				);
-			}
-		printf ("\n");
-		return;
-	}
-
-/*-----------------------------------------------------------------------
- */
-
-
-/*-----------------------------------------------------------------------
- */
-
-/*
- * The following code cannot be run from FLASH!
- */
-static ulong flash_get_size (vu_long *addr, flash_info_t *info)
-{
-	short i;
-	FLASH_WORD_SIZE value;
-	ulong base = (ulong)addr;
-	volatile FLASH_WORD_SIZE *addr2 = (FLASH_WORD_SIZE *)addr;
-
-	DEBUGF("FLASH ADDR: %08x\n", (unsigned)addr );
-
-	/* Write auto select command: read Manufacturer ID */
-	udelay(10000);
-	addr2[ADDR0] = (FLASH_WORD_SIZE)0x00AA00AA;
-	udelay(1000);
-	addr2[ADDR1] = (FLASH_WORD_SIZE)0x00550055;
-	udelay(1000);
-	addr2[ADDR0] = (FLASH_WORD_SIZE)0x00900090;
-	udelay(1000);
-
-#ifdef CONFIG_ADCIOP
-	value = addr2[2];
-#else
-	value = addr2[0];
-#endif
-
-	DEBUGF("FLASH MANUFACT: %x\n", value);
-
-	switch (value) {
-	case (FLASH_WORD_SIZE)AMD_MANUFACT:
-		info->flash_id = FLASH_MAN_AMD;
-		break;
-	case (FLASH_WORD_SIZE)FUJ_MANUFACT:
-		info->flash_id = FLASH_MAN_FUJ;
-		break;
-	case (FLASH_WORD_SIZE)SST_MANUFACT:
-		info->flash_id = FLASH_MAN_SST;
-		break;
-	case (FLASH_WORD_SIZE)STM_MANUFACT:
-		info->flash_id = FLASH_MAN_STM;
-		break;
-	default:
-		info->flash_id = FLASH_UNKNOWN;
-		info->sector_count = 0;
-		info->size = 0;
-		return (0);			/* no or unknown flash	*/
-	}
-
-#ifdef CONFIG_ADCIOP
-	value = addr2[0];			/* device ID		*/
-	debug ("\ndev_code=%x\n", value);
-#else
-	value = addr2[1];			/* device ID		*/
-#endif
-
-	DEBUGF("\nFLASH DEVICEID: %x\n", value);
-
-	switch (value) {
-	case (FLASH_WORD_SIZE)AMD_ID_LV040B:
-		info->flash_id += FLASH_AM040;
-		info->sector_count = 8;
-		info->size = 0x00080000; /* => 512 kb */
-		break;
-
-	default:
-		info->flash_id = FLASH_UNKNOWN;
-		return (0);			/* => no or unknown flash */
-
-	}
-
-	/* set up sector start address table */
-	if (((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) ||
-		    (info->flash_id  == FLASH_AM040) ||
-		    (info->flash_id  == FLASH_AMD016)) {
-		for (i = 0; i < info->sector_count; i++)
-			info->start[i] = base + (i * 0x00010000);
-	} else {
-		if (info->flash_id & FLASH_BTYPE) {
-			/* set sector offsets for bottom boot block type	*/
-			info->start[0] = base + 0x00000000;
-			info->start[1] = base + 0x00004000;
-			info->start[2] = base + 0x00006000;
-			info->start[3] = base + 0x00008000;
-			for (i = 4; i < info->sector_count; i++) {
-				info->start[i] = base + (i * 0x00010000) - 0x00030000;
-			}
-		} else {
-			/* set sector offsets for top boot block type		*/
-			i = info->sector_count - 1;
-			info->start[i--] = base + info->size - 0x00004000;
-			info->start[i--] = base + info->size - 0x00006000;
-			info->start[i--] = base + info->size - 0x00008000;
-			for (; i >= 0; i--) {
-				info->start[i] = base + i * 0x00010000;
-			}
-		}
-	}
-
-	/* check for protected sectors */
-	for (i = 0; i < info->sector_count; i++) {
-		/* read sector protection at sector address, (A7 .. A0) = 0x02 */
-		/* D0 = 1 if protected */
-#ifdef CONFIG_ADCIOP
-		addr2 = (volatile FLASH_WORD_SIZE *)(info->start[i]);
-		info->protect[i] = addr2[4] & 1;
-#else
-		addr2 = (volatile FLASH_WORD_SIZE *)(info->start[i]);
-		if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST)
-			info->protect[i] = 0;
-		else
-			info->protect[i] = addr2[2] & 1;
-#endif
-	}
-
-	/*
-	 * Prevent writes to uninitialized FLASH.
-	 */
-	if (info->flash_id != FLASH_UNKNOWN) {
-#if 0 /* test-only */
-#ifdef CONFIG_ADCIOP
-		addr2 = (volatile unsigned char *)info->start[0];
-		addr2[ADDR0] = 0xAA;
-		addr2[ADDR1] = 0x55;
-		addr2[ADDR0] = 0xF0;  /* reset bank */
-#else
-		addr2 = (FLASH_WORD_SIZE *)info->start[0];
-		*addr2 = (FLASH_WORD_SIZE)0x00F000F0;	/* reset bank */
-#endif
-#else /* test-only */
-		addr2 = (FLASH_WORD_SIZE *)info->start[0];
-		*addr2 = (FLASH_WORD_SIZE)0x00F000F0;	/* reset bank */
-#endif /* test-only */
-	}
-
-	return (info->size);
-}
-
-int wait_for_DQ7(flash_info_t *info, int sect)
-{
-	ulong start, now, last;
-	volatile FLASH_WORD_SIZE *addr = (FLASH_WORD_SIZE *)(info->start[sect]);
-
-	start = get_timer (0);
-	last  = start;
-	while ((addr[0] & (FLASH_WORD_SIZE)0x00800080) != (FLASH_WORD_SIZE)0x00800080) {
-		if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
-			printf ("Timeout\n");
-			return -1;
-		}
-		/* show that we're waiting */
-		if ((now - last) > 1000) {  /* every second */
-			putc ('.');
-			last = now;
-		}
-	}
-	return 0;
-}
-
-/*-----------------------------------------------------------------------
- */
-
-int	flash_erase (flash_info_t *info, int s_first, int s_last)
-{
-	volatile FLASH_WORD_SIZE *addr = (FLASH_WORD_SIZE *)(info->start[0]);
-	volatile FLASH_WORD_SIZE *addr2;
-	int flag, prot, sect, l_sect;
-	int i;
-
-	if ((s_first < 0) || (s_first > s_last)) {
-		if (info->flash_id == FLASH_UNKNOWN) {
-			printf ("- missing\n");
-		} else {
-			printf ("- no sectors to erase\n");
-		}
-		return 1;
-	}
-
-	if (info->flash_id == FLASH_UNKNOWN) {
-		printf ("Can't erase unknown flash type - aborted\n");
-		return 1;
-	}
-
-	prot = 0;
-	for (sect=s_first; sect<=s_last; ++sect) {
-		if (info->protect[sect]) {
-			prot++;
-		}
-	}
-
-	if (prot) {
-		printf ("- Warning: %d protected sectors will not be erased!\n",
-			prot);
-	} else {
-		printf ("\n");
-	}
-
-	l_sect = -1;
-
-	/* Disable interrupts which might cause a timeout here */
-	flag = disable_interrupts();
-
-	/* Start erase on unprotected sectors */
-	for (sect = s_first; sect<=s_last; sect++) {
-		if (info->protect[sect] == 0) { /* not protected */
-			addr2 = (FLASH_WORD_SIZE *)(info->start[sect]);
-			printf("Erasing sector %p\n", addr2);
-
-			if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) {
-				addr[ADDR0] = (FLASH_WORD_SIZE)0x00AA00AA;
-				addr[ADDR1] = (FLASH_WORD_SIZE)0x00550055;
-				addr[ADDR0] = (FLASH_WORD_SIZE)0x00800080;
-				addr[ADDR0] = (FLASH_WORD_SIZE)0x00AA00AA;
-				addr[ADDR1] = (FLASH_WORD_SIZE)0x00550055;
-				addr2[0] = (FLASH_WORD_SIZE)0x00500050;	 /* block erase */
-				for (i=0; i<50; i++)
-					udelay(1000);  /* wait 1 ms */
-			} else {
-				addr[ADDR0] = (FLASH_WORD_SIZE)0x00AA00AA;
-				addr[ADDR1] = (FLASH_WORD_SIZE)0x00550055;
-				addr[ADDR0] = (FLASH_WORD_SIZE)0x00800080;
-				addr[ADDR0] = (FLASH_WORD_SIZE)0x00AA00AA;
-				addr[ADDR1] = (FLASH_WORD_SIZE)0x00550055;
-				addr2[0] = (FLASH_WORD_SIZE)0x00300030;	 /* sector erase */
-			}
-			l_sect = sect;
-			/*
-			 * Wait for each sector to complete, it's more
-			 * reliable.  According to AMD Spec, you must
-			 * issue all erase commands within a specified
-			 * timeout.  This has been seen to fail, especially
-			 * if printf()s are included (for debug)!!
-			 */
-			wait_for_DQ7(info, sect);
-		}
-	}
-
-	/* re-enable interrupts if necessary */
-	if (flag)
-		enable_interrupts();
-
-	/* wait at least 80us - let's wait 1 ms */
-	udelay (1000);
-
-#if 0
-	/*
-	 * We wait for the last triggered sector
-	 */
-	if (l_sect < 0)
-		goto DONE;
-	wait_for_DQ7(info, l_sect);
-
-DONE:
-#endif
-	/* reset to read mode */
-	addr = (FLASH_WORD_SIZE *)info->start[0];
-	addr[0] = (FLASH_WORD_SIZE)0x00F000F0;	/* reset bank */
-
-	printf (" done\n");
-	return 0;
-}
-
-/*-----------------------------------------------------------------------
- * Copy memory to flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-
-int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
-{
-	ulong cp, wp, data;
-	int i, l, rc;
-
-	wp = (addr & ~3);	/* get lower word aligned address */
-
-	/*
-	 * handle unaligned start bytes
-	 */
-	if ((l = addr - wp) != 0) {
-		data = 0;
-		for (i=0, cp=wp; i<l; ++i, ++cp) {
-			data = (data << 8) | (*(uchar *)cp);
-		}
-		for (; i<4 && cnt>0; ++i) {
-			data = (data << 8) | *src++;
-			--cnt;
-			++cp;
-		}
-		for (; cnt==0 && i<4; ++i, ++cp) {
-			data = (data << 8) | (*(uchar *)cp);
-		}
-
-		if ((rc = write_word(info, wp, data)) != 0) {
-			return (rc);
-		}
-		wp += 4;
-	}
-
-	/*
-	 * handle word aligned part
-	 */
-	while (cnt >= 4) {
-		data = 0;
-		for (i=0; i<4; ++i) {
-			data = (data << 8) | *src++;
-		}
-		if ((rc = write_word(info, wp, data)) != 0) {
-			return (rc);
-		}
-		wp  += 4;
-		cnt -= 4;
-	}
-
-	if (cnt == 0) {
-		return (0);
-	}
-
-	/*
-	 * handle unaligned tail bytes
-	 */
-	data = 0;
-	for (i=0, cp=wp; i<4 && cnt>0; ++i, ++cp) {
-		data = (data << 8) | *src++;
-		--cnt;
-	}
-	for (; i<4; ++i, ++cp) {
-		data = (data << 8) | (*(uchar *)cp);
-	}
-
-	return (write_word(info, wp, data));
-}
-
-/*-----------------------------------------------------------------------
- * Write a word to Flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-static int write_word (flash_info_t * info, ulong dest, ulong data)
-{
-	volatile FLASH_WORD_SIZE *addr2 = (FLASH_WORD_SIZE *) (info->start[0]);
-	volatile FLASH_WORD_SIZE *dest2 = (FLASH_WORD_SIZE *) dest;
-	volatile FLASH_WORD_SIZE *data2 = (FLASH_WORD_SIZE *) & data;
-	ulong start;
-	int i;
-
-	/* Check if Flash is (sufficiently) erased */
-	if ((*((volatile FLASH_WORD_SIZE *) dest) &
-	     (FLASH_WORD_SIZE) data) != (FLASH_WORD_SIZE) data) {
-		return (2);
-	}
-
-	for (i = 0; i < 4 / sizeof (FLASH_WORD_SIZE); i++) {
-		int flag;
-
-		/* Disable interrupts which might cause a timeout here */
-		flag = disable_interrupts ();
-
-		addr2[ADDR0] = (FLASH_WORD_SIZE) 0x00AA00AA;
-		addr2[ADDR1] = (FLASH_WORD_SIZE) 0x00550055;
-		addr2[ADDR0] = (FLASH_WORD_SIZE) 0x00A000A0;
-
-		dest2[i] = data2[i];
-
-		/* re-enable interrupts if necessary */
-		if (flag)
-			enable_interrupts ();
-
-		/* data polling for D7 */
-		start = get_timer (0);
-		while ((dest2[i] & (FLASH_WORD_SIZE) 0x00800080) !=
-		       (data2[i] & (FLASH_WORD_SIZE) 0x00800080)) {
-
-			if (get_timer (start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
-				return (1);
-			}
-		}
-	}
-
-	return (0);
-}
-
-/*-----------------------------------------------------------------------
- */
diff --git a/board/xpedite1k/xpedite1k.c b/board/xpedite1k/xpedite1k.c
deleted file mode 100644
index 044aeb9..0000000
--- a/board/xpedite1k/xpedite1k.c
+++ /dev/null
@@ -1,393 +0,0 @@
-/*
- *  Copyright (C) 2003 Travis B. Sawyer	 <travis.sawyer@sandburst.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-
-#include <common.h>
-#include <asm/processor.h>
-#include <spd_sdram.h>
-#include <i2c.h>
-#include <net.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#define BOOT_SMALL_FLASH	32	/* 00100000 */
-#define FLASH_ONBD_N		2	/* 00000010 */
-#define FLASH_SRAM_SEL		1	/* 00000001 */
-
-long int fixed_sdram (void);
-
-int board_early_init_f(void)
-{
-	unsigned long sdrreg;
-	/* TBS:	 Setup the GPIO access for the user LEDs */
-	mfsdr(sdr_pfc0, sdrreg);
-	mtsdr(sdr_pfc0, (sdrreg & ~0x00000100) | 0x00000E00);
-	out32(CONFIG_SYS_GPIO_BASE + 0x018, (USR_LED0 | USR_LED1 | USR_LED2 | USR_LED3));
-	LED0_OFF();
-	LED1_OFF();
-	LED2_OFF();
-	LED3_OFF();
-
-	/*--------------------------------------------------------------------
-	 * Setup the external bus controller/chip selects
-	 *-------------------------------------------------------------------*/
-
-	/* set the bus controller */
-	mtebc (pb0ap, 0x04055200);	/* FLASH/SRAM */
-	mtebc (pb0cr, 0xfff18000);	/* BAS=0xfff 1MB R/W 8-bit */
-	mtebc (pb1ap, 0x04055200);	/* FLASH/SRAM */
-	mtebc (pb1cr, 0xfe098000);	/* BAS=0xff8 16MB R/W 8-bit */
-
-	/*--------------------------------------------------------------------
-	 * Setup the interrupt controller polarities, triggers, etc.
-	 *-------------------------------------------------------------------*/
-	/*
-	 * Because of the interrupt handling rework to handle 440GX interrupts
-	 * with the common code, we needed to change names of the UIC registers.
-	 * Here the new relationship:
-	 *
-	 * U-Boot name	440GX name
-	 * -----------------------
-	 * UIC0		UICB0
-	 * UIC1		UIC0
-	 * UIC2		UIC1
-	 * UIC3		UIC2
-	 */
-	mtdcr (uic1sr, 0xffffffff);	/* clear all */
-	mtdcr (uic1er, 0x00000000);	/* disable all */
-	mtdcr (uic1cr, 0x00000003);	/* SMI & UIC1 crit are critical */
-	mtdcr (uic1pr, 0xfffffe00);	/* per ref-board manual */
-	mtdcr (uic1tr, 0x01c00000);	/* per ref-board manual */
-	mtdcr (uic1vr, 0x00000001);	/* int31 highest, base=0x000 */
-	mtdcr (uic1sr, 0xffffffff);	/* clear all */
-
-	mtdcr (uic2sr, 0xffffffff);	/* clear all */
-	mtdcr (uic2er, 0x00000000);	/* disable all */
-	mtdcr (uic2cr, 0x00000000);	/* all non-critical */
-	mtdcr (uic2pr, 0xffffc0ff);	/* per ref-board manual */
-	mtdcr (uic2tr, 0x00ff8000);	/* per ref-board manual */
-	mtdcr (uic2vr, 0x00000001);	/* int31 highest, base=0x000 */
-	mtdcr (uic2sr, 0xffffffff);	/* clear all */
-
-	mtdcr (uic3sr, 0xffffffff);	/* clear all */
-	mtdcr (uic3er, 0x00000000);	/* disable all */
-	mtdcr (uic3cr, 0x00000000);	/* all non-critical */
-	mtdcr (uic3pr, 0xffffffff);	/* per ref-board manual */
-	mtdcr (uic3tr, 0x00ff8c0f);	/* per ref-board manual */
-	mtdcr (uic3vr, 0x00000001);	/* int31 highest, base=0x000 */
-	mtdcr (uic3sr, 0xffffffff);	/* clear all */
-
-	mtdcr (uic0sr, 0xfc000000); /* clear all */
-	mtdcr (uic0er, 0x00000000); /* disable all */
-	mtdcr (uic0cr, 0x00000000); /* all non-critical */
-	mtdcr (uic0pr, 0xfc000000); /* */
-	mtdcr (uic0tr, 0x00000000); /* */
-	mtdcr (uic0vr, 0x00000001); /* */
-
-	LED0_ON();
-
-
-	return 0;
-}
-
-int checkboard (void)
-{
-	printf ("Board: XES XPedite1000 440GX\n");
-
-	return (0);
-}
-
-
-phys_size_t initdram (int board_type)
-{
-	long dram_size = 0;
-
-#if defined(CONFIG_SPD_EEPROM)
-	dram_size = spd_sdram ();
-#else
-	dram_size = fixed_sdram ();
-#endif
-	return dram_size;
-}
-
-
-#if defined(CONFIG_SYS_DRAM_TEST)
-int testdram (void)
-{
-	uint *pstart = (uint *) 0x00000000;
-	uint *pend = (uint *) 0x08000000;
-	uint *p;
-
-	for (p = pstart; p < pend; p++)
-		*p = 0xaaaaaaaa;
-
-	for (p = pstart; p < pend; p++) {
-		if (*p != 0xaaaaaaaa) {
-			printf ("SDRAM test fails at: %08x\n", (uint) p);
-			return 1;
-		}
-	}
-
-	for (p = pstart; p < pend; p++)
-		*p = 0x55555555;
-
-	for (p = pstart; p < pend; p++) {
-		if (*p != 0x55555555) {
-			printf ("SDRAM test fails at: %08x\n", (uint) p);
-			return 1;
-		}
-	}
-	return 0;
-}
-#endif
-
-#if !defined(CONFIG_SPD_EEPROM)
-/*************************************************************************
- *  fixed sdram init -- doesn't use serial presence detect.
- *
- *  Assumes:	128 MB, non-ECC, non-registered
- *		PLB @ 133 MHz
- *
- ************************************************************************/
-long int fixed_sdram (void)
-{
-	uint reg;
-
-	/*--------------------------------------------------------------------
-	 * Setup some default
-	 *------------------------------------------------------------------*/
-	mtsdram (mem_uabba, 0x00000000);	/* ubba=0 (default)		*/
-	mtsdram (mem_slio, 0x00000000);		/* rdre=0 wrre=0 rarw=0		*/
-	mtsdram (mem_devopt, 0x00000000);	/* dll=0 ds=0 (normal)		*/
-	mtsdram (mem_wddctr, 0x00000000);	/* wrcp=0 dcd=0			*/
-	mtsdram (mem_clktr, 0x40000000);	/* clkp=1 (90 deg wr) dcdt=0	*/
-
-	/*--------------------------------------------------------------------
-	 * Setup for board-specific specific mem
-	 *------------------------------------------------------------------*/
-	/*
-	 * Following for CAS Latency = 2.5 @ 133 MHz PLB
-	 */
-	mtsdram (mem_b0cr, 0x000a4001); /* SDBA=0x000 128MB, Mode 3, enabled */
-	mtsdram (mem_tr0, 0x410a4012);	/* WR=2	 WD=1 CL=2.5 PA=3 CP=4 LD=2 */
-	/* RA=10 RD=3			    */
-	mtsdram (mem_tr1, 0x8080082f);	/* SS=T2 SL=STAGE 3 CD=1 CT=0x02f   */
-	mtsdram (mem_rtr, 0x08200000);	/* Rate 15.625 ns @ 133 MHz PLB	    */
-	mtsdram (mem_cfg1, 0x00000000); /* Self-refresh exit, disable PM    */
-	udelay (400);			/* Delay 200 usecs (min)	    */
-
-	/*--------------------------------------------------------------------
-	 * Enable the controller, then wait for DCEN to complete
-	 *------------------------------------------------------------------*/
-	mtsdram (mem_cfg0, 0x86000000); /* DCEN=1, PMUD=1, 64-bit	    */
-	for (;;) {
-		mfsdram (mem_mcsts, reg);
-		if (reg & 0x80000000)
-			break;
-	}
-
-	return (128 * 1024 * 1024);	/* 128 MB			    */
-}
-#endif	/* !defined(CONFIG_SPD_EEPROM) */
-
-
-/*************************************************************************
- *  pci_pre_init
- *
- *  This routine is called just prior to registering the hose and gives
- *  the board the opportunity to check things. Returning a value of zero
- *  indicates that things are bad & PCI initialization should be aborted.
- *
- *	Different boards may wish to customize the pci controller structure
- *	(add regions, override default access routines, etc) or perform
- *	certain pre-initialization actions.
- *
- ************************************************************************/
-#if defined(CONFIG_PCI)
-int pci_pre_init(struct pci_controller * hose )
-{
-	unsigned long strap;
-	/* See if we're supposed to setup the pci */
-	mfsdr(sdr_sdstp1, strap);
-	if ((strap & 0x00010000) == 0) {
-		return (0);
-	}
-
-#if defined(CONFIG_SYS_PCI_FORCE_PCI_CONV)
-	/* Setup System Device Register PCIX0_XCR */
-	mfsdr(sdr_xcr, strap);
-	strap &= 0x0f000000;
-	mtsdr(sdr_xcr, strap);
-#endif
-	return 1;
-}
-#endif /* defined(CONFIG_PCI) */
-
-/*************************************************************************
- *  pci_target_init
- *
- *	The bootstrap configuration provides default settings for the pci
- *	inbound map (PIM). But the bootstrap config choices are limited and
- *	may not be sufficient for a given board.
- *
- ************************************************************************/
-#if defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT)
-void pci_target_init(struct pci_controller * hose )
-{
-	/*--------------------------------------------------------------------------+
-	 * Disable everything
-	 *--------------------------------------------------------------------------*/
-	out32r( PCIX0_PIM0SA, 0 ); /* disable */
-	out32r( PCIX0_PIM1SA, 0 ); /* disable */
-	out32r( PCIX0_PIM2SA, 0 ); /* disable */
-	out32r( PCIX0_EROMBA, 0 ); /* disable expansion rom */
-
-	/*--------------------------------------------------------------------------+
-	 * Map all of SDRAM to PCI address 0x0000_0000. Note that the 440 strapping
-	 * options to not support sizes such as 128/256 MB.
-	 *--------------------------------------------------------------------------*/
-	out32r( PCIX0_PIM0LAL, CONFIG_SYS_SDRAM_BASE );
-	out32r( PCIX0_PIM0LAH, 0 );
-	out32r( PCIX0_PIM0SA, ~(gd->ram_size - 1) | 1 );
-
-	out32r( PCIX0_BAR0, 0 );
-
-	/*--------------------------------------------------------------------------+
-	 * Program the board's subsystem id/vendor id
-	 *--------------------------------------------------------------------------*/
-	out16r( PCIX0_SBSYSVID, CONFIG_SYS_PCI_SUBSYS_VENDORID );
-	out16r( PCIX0_SBSYSID, CONFIG_SYS_PCI_SUBSYS_DEVICEID );
-
-	out16r( PCIX0_CMD, in16r(PCIX0_CMD) | PCI_COMMAND_MEMORY );
-}
-#endif /* defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT) */
-
-
-/*************************************************************************
- *  is_pci_host
- *
- *	This routine is called to determine if a pci scan should be
- *	performed. With various hardware environments (especially cPCI and
- *	PPMC) it's insufficient to depend on the state of the arbiter enable
- *	bit in the strap register, or generic host/adapter assumptions.
- *
- *	Rather than hard-code a bad assumption in the general 440 code, the
- *	440 pci code requires the board to decide at runtime.
- *
- *	Return 0 for adapter mode, non-zero for host (monarch) mode.
- *
- *
- ************************************************************************/
-#if defined(CONFIG_PCI)
-int is_pci_host(struct pci_controller *hose)
-{
-	return ((in32(CONFIG_SYS_GPIO_BASE + 0x1C) & 0x00000800) == 0);
-}
-#endif /* defined(CONFIG_PCI) */
-
-#ifdef CONFIG_POST
-/*
- * Returns 1 if keys pressed to start the power-on long-running tests
- * Called from board_init_f().
- */
-int post_hotkeys_pressed(void)
-{
-
-	return (ctrlc());
-}
-
-void post_word_store (ulong a)
-{
-	volatile ulong *save_addr =
-		(volatile ulong *)(CONFIG_SYS_POST_WORD_ADDR);
-
-	*save_addr = a;
-}
-
-ulong post_word_load (void)
-{
-	volatile ulong *save_addr =
-		(volatile ulong *)(CONFIG_SYS_POST_WORD_ADDR);
-
-	return *save_addr;
-}
-#endif
-
-/*-----------------------------------------------------------------------------
- * board_get_enetaddr -- Read the MAC Addresses in the I2C EEPROM
- *-----------------------------------------------------------------------------
- */
-static int read_i2c;
-static void board_get_enetaddr(uchar *enet)
-{
-	int i;
-	unsigned char buff[0x100], *cp;
-
-	if (read_i2c)
-		return;
-
-	/* Initialize I2C					*/
-	i2c_init (CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
-
-	/* Read 256 bytes in EEPROM				*/
-	i2c_read (0x50, 0, 1, buff, 0x100);
-
-	cp = &buff[0xF4];
-	for (i = 0; i < 6; i++,cp++)
-		enet[i] = *cp;
-
-	printf("MAC address = %pM\n", enet);
-	read_i2c = 1;
-}
-
-int misc_init_r(void)
-{
-	uchar enetaddr[6], i2c_enetaddr[6];
-
-	if (!eth_getenv_enetaddr("ethaddr", enetaddr)) {
-		board_get_enetaddr(i2c_enetaddr);
-		eth_setenv_enetaddr("ethaddr", i2c_enetaddr);
-	}
-
-#ifdef CONFIG_HAS_ETH1
-	if (!eth_getenv_enetaddr("eth1addr", enetaddr)) {
-		board_get_enetaddr(i2c_enetaddr);
-		eth_setenv_enetaddr("eth1addr", i2c_enetaddr);
-	}
-#endif
-
-#ifdef CONFIG_HAS_ETH2
-	if (!eth_getenv_enetaddr("eth2addr", enetaddr)) {
-		board_get_enetaddr(i2c_enetaddr);
-		eth_setenv_enetaddr("eth2addr", i2c_enetaddr);
-	}
-#endif
-
-#ifdef CONFIG_HAS_ETH3
-	if (!eth_getenv_enetaddr("eth3addr", enetaddr)) {
-		board_get_enetaddr(i2c_enetaddr);
-		eth_setenv_enetaddr("eth3addr", i2c_enetaddr);
-	}
-#endif
-
-	return 0;
-}
diff --git a/cpu/ppc4xx/Makefile b/cpu/ppc4xx/Makefile
index 6f52dfd..2050b17 100644
--- a/cpu/ppc4xx/Makefile
+++ b/cpu/ppc4xx/Makefile
@@ -41,6 +41,9 @@ endif
 COBJS	+= 4xx_pci.o
 COBJS	+= 4xx_pcie.o
 COBJS	+= bedbug_405.o
+ifdef CONFIG_CMD_CHIP_CONFIG
+COBJS	+= cmd_chip_config.o
+endif
 COBJS	+= commproc.o
 COBJS	+= cpu.o
 COBJS	+= cpu_init.o
diff --git a/cpu/ppc4xx/cmd_chip_config.c b/cpu/ppc4xx/cmd_chip_config.c
new file mode 100644
index 0000000..d360d5b
--- /dev/null
+++ b/cpu/ppc4xx/cmd_chip_config.c
@@ -0,0 +1,142 @@
+/*
+ * (C) Copyright 2008-2009
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * (C) Copyright 2009
+ * Dirk Eibach,  Guntermann & Drunck GmbH, eibach@gdsys.de
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+#include <common.h>
+#include <command.h>
+#include <i2c.h>
+#include <asm/ppc4xx_config.h>
+#include <asm/io.h>
+
+static void print_configs(int cur_config_nr)
+{
+	int i;
+
+	for (i = 0; i < ppc4xx_config_count; i++) {
+		printf("%-16s - %s", ppc4xx_config_val[i].label,
+		       ppc4xx_config_val[i].description);
+		if (i == cur_config_nr)
+			printf(" ***");
+		printf("\n");
+	}
+
+}
+
+static int do_chip_config(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+	int i;
+	int ret;
+	int cur_config_nr = -1;
+	u8 cur_config[CONFIG_4xx_CONFIG_BLOCKSIZE];
+
+#ifdef CONFIG_CMD_EEPROM
+	ret = eeprom_read(CONFIG_4xx_CONFIG_I2C_EEPROM_ADDR,
+			  CONFIG_4xx_CONFIG_I2C_EEPROM_OFFSET,
+			  cur_config, CONFIG_4xx_CONFIG_BLOCKSIZE);
+#else
+	ret = i2c_read(CONFIG_4xx_CONFIG_I2C_EEPROM_ADDR,
+		       CONFIG_4xx_CONFIG_I2C_EEPROM_OFFSET,
+		       1, cur_config, CONFIG_4xx_CONFIG_BLOCKSIZE);
+#endif
+	if (ret) {
+		printf("Error reading EEPROM at addr 0x%x\n",
+		       CONFIG_4xx_CONFIG_I2C_EEPROM_ADDR);
+		return -1;
+	}
+
+	/*
+	 * Search the current configuration
+	 */
+	for (i = 0; i < ppc4xx_config_count; i++) {
+		if (memcmp(cur_config, ppc4xx_config_val[i].val,
+			   CONFIG_4xx_CONFIG_BLOCKSIZE) == 0)
+			cur_config_nr = i;
+	}
+
+	if (cur_config_nr == -1) {
+		printf("Warning: The I2C bootstrap values don't match any"
+		       " of the available options!\n");
+		printf("I2C bootstrap EEPROM values are (I2C address 0x%02x):\n",
+			CONFIG_4xx_CONFIG_I2C_EEPROM_ADDR);
+		for (i = 0; i < CONFIG_4xx_CONFIG_BLOCKSIZE; i++) {
+			printf("%02x ", cur_config[i]);
+		}
+		printf("\n");
+	}
+
+	if (argc < 2) {
+		printf("Available configurations (I2C address 0x%02x):\n",
+		       CONFIG_4xx_CONFIG_I2C_EEPROM_ADDR);
+		print_configs(cur_config_nr);
+		return 0;
+	}
+
+	for (i = 0; i < ppc4xx_config_count; i++) {
+		/*
+		 * Search for configuration name/label
+		 */
+		if (strcmp(argv[1], ppc4xx_config_val[i].label) == 0) {
+			printf("Using configuration:\n%-16s - %s\n",
+			       ppc4xx_config_val[i].label,
+			       ppc4xx_config_val[i].description);
+
+#ifdef CONFIG_CMD_EEPROM
+			ret = eeprom_write(CONFIG_4xx_CONFIG_I2C_EEPROM_ADDR,
+					   CONFIG_4xx_CONFIG_I2C_EEPROM_OFFSET,
+					   ppc4xx_config_val[i].val,
+					   CONFIG_4xx_CONFIG_BLOCKSIZE);
+#else
+			ret = i2c_write(CONFIG_4xx_CONFIG_I2C_EEPROM_ADDR,
+					CONFIG_4xx_CONFIG_I2C_EEPROM_OFFSET,
+					1, ppc4xx_config_val[i].val,
+					CONFIG_4xx_CONFIG_BLOCKSIZE);
+#endif
+			udelay(CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS * 1000);
+			if (ret) {
+				printf("Error updating EEPROM at addr 0x%x\n",
+				       CONFIG_4xx_CONFIG_I2C_EEPROM_ADDR);
+				return -1;
+			}
+
+			printf("done (dump via 'i2c md %x 0.1 %x')\n",
+			       CONFIG_4xx_CONFIG_I2C_EEPROM_ADDR,
+			       CONFIG_4xx_CONFIG_BLOCKSIZE);
+			printf("Reset the board for the changes to"
+			       " take effect\n");
+			return 0;
+		}
+	}
+
+	printf("Configuration %s not found!\n", argv[1]);
+	print_configs(cur_config_nr);
+	return -1;
+}
+
+U_BOOT_CMD(
+	chip_config,	2,	0,	do_chip_config,
+	"program the I2C bootstrap EEPROM",
+	"[config-label]"
+);
diff --git a/cpu/ppc4xx/cpu.c b/cpu/ppc4xx/cpu.c
index fb3837c..e12a784 100644
--- a/cpu/ppc4xx/cpu.c
+++ b/cpu/ppc4xx/cpu.c
@@ -272,7 +272,7 @@ static int do_chip_reset (unsigned long sys0, unsigned long sys1)
 	mtdcr (cpc0_sys0, sys0);
 	mtdcr (cpc0_sys1, sys1);
 	mtdcr (cntrl0, mfdcr (cntrl0) & ~0x80000000);	/* Clr SWE */
-	mtspr (dbcr0, 0x20000000);	/* Reset the chip */
+	mtspr (SPRN_DBCR0, 0x20000000);	/* Reset the chip */
 
 	return 1;
 }
@@ -654,12 +654,12 @@ int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 	board_reset();
 #else
 #if defined(CONFIG_SYS_4xx_RESET_TYPE)
-	mtspr(dbcr0, CONFIG_SYS_4xx_RESET_TYPE << 28);
+	mtspr(SPRN_DBCR0, CONFIG_SYS_4xx_RESET_TYPE << 28);
 #else
 	/*
 	 * Initiate system reset in debug control register DBCR
 	 */
-	mtspr(dbcr0, 0x30000000);
+	mtspr(SPRN_DBCR0, 0x30000000);
 #endif /* defined(CONFIG_SYS_4xx_RESET_TYPE) */
 #endif /* defined(CONFIG_BOARD_RESET) */
 
@@ -697,7 +697,7 @@ void reset_4xx_watchdog(void)
 	/*
 	 * Clear TSR(WIS) bit
 	 */
-	mtspr(tsr, 0x40000000);
+	mtspr(SPRN_TSR, 0x40000000);
 }
 #endif	/* CONFIG_WATCHDOG */
 
diff --git a/cpu/ppc4xx/cpu_init.c b/cpu/ppc4xx/cpu_init.c
index bbd795d..65092fb 100644
--- a/cpu/ppc4xx/cpu_init.c
+++ b/cpu/ppc4xx/cpu_init.c
@@ -123,7 +123,7 @@ void reconfigure_pll(u32 new_cpu_freq)
 	/* Reset processor if configuration changed */
 	if (reset_needed) {
 		__asm__ __volatile__ ("sync; isync");
-		mtspr(dbcr0, 0x20000000);
+		mtspr(SPRN_DBCR0, 0x20000000);
 	}
 #endif
 }
diff --git a/cpu/ppc4xx/interrupts.c b/cpu/ppc4xx/interrupts.c
index 494bd8c..6db8421 100644
--- a/cpu/ppc4xx/interrupts.c
+++ b/cpu/ppc4xx/interrupts.c
@@ -102,15 +102,15 @@ int interrupt_init_cpu (unsigned *decrementer_count)
 	 * Init PIT
 	 */
 #if defined(CONFIG_440)
-	val = mfspr( tcr );
+	val = mfspr( SPRN_TCR );
 	val &= (~0x04400000);		/* clear DIS & ARE */
-	mtspr( tcr, val );
-	mtspr( dec, 0 );		/* Prevent exception after TSR clear*/
-	mtspr( decar, 0 );		/* clear reload */
-	mtspr( tsr, 0x08000000 );	/* clear DEC status */
+	mtspr( SPRN_TCR, val );
+	mtspr( SPRN_DEC, 0 );		/* Prevent exception after TSR clear*/
+	mtspr( SPRN_DECAR, 0 );		/* clear reload */
+	mtspr( SPRN_TSR, 0x08000000 );	/* clear DEC status */
 	val = gd->bd->bi_intfreq/1000;	/* 1 msec */
-	mtspr( decar, val );		/* Set auto-reload value */
-	mtspr( dec, val );		/* Set inital val */
+	mtspr( SPRN_DECAR, val );		/* Set auto-reload value */
+	mtspr( SPRN_DEC, val );		/* Set inital val */
 #else
 	set_pit(gd->bd->bi_intfreq / 1000);
 #endif
@@ -126,9 +126,9 @@ int interrupt_init_cpu (unsigned *decrementer_count)
 	/*
 	 * Enable PIT
 	 */
-	val = mfspr(tcr);
+	val = mfspr(SPRN_TCR);
 	val |= 0x04400000;
-	mtspr(tcr, val);
+	mtspr(SPRN_TCR, val);
 
 	/*
 	 * Set EVPR to 0
diff --git a/cpu/ppc4xx/speed.c b/cpu/ppc4xx/speed.c
index ed6e55b..c0a5824 100644
--- a/cpu/ppc4xx/speed.c
+++ b/cpu/ppc4xx/speed.c
@@ -394,7 +394,8 @@ void get_sys_info (sys_info_t *sysInfo)
 	sysInfo->freqUART = sysInfo->freqPLB;
 
 	/* Figure which timer source to use */
-	if (mfspr(ccr1) & 0x0080) { /* External Clock, assume same as SYS_CLK */
+	if (mfspr(SPRN_CCR1) & 0x0080) {
+		/* External Clock, assume same as SYS_CLK */
 		temp = sysInfo->freqProcessor / 2;  /* Max extern clock speed */
 		if (CONFIG_SYS_CLK_FREQ > temp)
 			sysInfo->freqTmrClk = temp;
@@ -867,6 +868,8 @@ void get_sys_info (PPC4xx_SYS_INFO * sysInfo)
 
 	sysInfo->freqEBC = sysInfo->freqPLB / sysInfo->pllExtBusDiv;
 
+	sysInfo->freqOPB = sysInfo->freqPLB / sysInfo->pllOpbDiv;
+
 	sysInfo->freqUART = sysInfo->freqProcessor * pllmr0_ccdv;
 }
 
diff --git a/cpu/ppc4xx/start.S b/cpu/ppc4xx/start.S
index 582c781..60756c3 100644
--- a/cpu/ppc4xx/start.S
+++ b/cpu/ppc4xx/start.S
@@ -297,7 +297,7 @@ _start_440:
 	| Core bug fix.  Clear the esr
 	+-----------------------------------------------------------------*/
 	li	r0,0
-	mtspr	esr,r0
+	mtspr	SPRN_ESR,r0
 	/*----------------------------------------------------------------*/
 	/* Clear and set up some registers. */
 	/*----------------------------------------------------------------*/
@@ -305,16 +305,16 @@ _start_440:
 	dccci	r0,r0		/* NOTE: operands not used for 440 */
 	sync
 	li	r0,0
-	mtspr	srr0,r0
-	mtspr	srr1,r0
-	mtspr	csrr0,r0
-	mtspr	csrr1,r0
+	mtspr	SPRN_SRR0,r0
+	mtspr	SPRN_SRR1,r0
+	mtspr	SPRN_CSRR0,r0
+	mtspr	SPRN_CSRR1,r0
 	/* NOTE: 440GX adds machine check status regs */
 #if defined(CONFIG_440) && !defined(CONFIG_440GP)
-	mtspr	mcsrr0,r0
-	mtspr	mcsrr1,r0
-	mfspr	r1,mcsr
-	mtspr	mcsr,r1
+	mtspr	SPRN_MCSRR0,r0
+	mtspr	SPRN_MCSRR1,r0
+	mfspr	r1,SPRN_MCSR
+	mtspr	SPRN_MCSR,r1
 #endif
 
 	/*----------------------------------------------------------------*/
@@ -326,27 +326,27 @@ _start_440:
 	*/
 	lis	r1,0x0030	/* store gathering & broadcast disable */
 	ori	r1,r1,0x6000	/* cache touch */
-	mtspr	ccr0,r1
+	mtspr	SPRN_CCR0,r1
 
 	/*----------------------------------------------------------------*/
 	/* Initialize debug */
 	/*----------------------------------------------------------------*/
-	mfspr	r1,dbcr0
+	mfspr	r1,SPRN_DBCR0
 	andis.	r1, r1, 0x8000	/* test DBCR0[EDM] bit			*/
 	bne	skip_debug_init	/* if set, don't clear debug register	*/
-	mtspr	dbcr0,r0
-	mtspr	dbcr1,r0
-	mtspr	dbcr2,r0
-	mtspr	iac1,r0
-	mtspr	iac2,r0
-	mtspr	iac3,r0
-	mtspr	dac1,r0
-	mtspr	dac2,r0
-	mtspr	dvc1,r0
-	mtspr	dvc2,r0
-
-	mfspr	r1,dbsr
-	mtspr	dbsr,r1		/* Clear all valid bits */
+	mtspr	SPRN_DBCR0,r0
+	mtspr	SPRN_DBCR1,r0
+	mtspr	SPRN_DBCR2,r0
+	mtspr	SPRN_IAC1,r0
+	mtspr	SPRN_IAC2,r0
+	mtspr	SPRN_IAC3,r0
+	mtspr	SPRN_DAC1,r0
+	mtspr	SPRN_DAC2,r0
+	mtspr	SPRN_DVC1,r0
+	mtspr	SPRN_DVC2,r0
+
+	mfspr	r1,SPRN_DBSR
+	mtspr	SPRN_DBSR,r1	/* Clear all valid bits */
 skip_debug_init:
 
 #if defined (CONFIG_440SPE)
@@ -364,68 +364,68 @@ skip_debug_init:
 	| j. TCS:    Timebase increments from CPU clock.
 	+-----------------------------------------------------------------*/
 	li	r0,0
-	mtspr	ccr1, r0
+	mtspr	SPRN_CCR1, r0
 
 	/*----------------------------------------------------------------+
 	| Reset the timebase.
 	| The previous write to CCR1 sets the timebase source.
 	+-----------------------------------------------------------------*/
-	mtspr	tbl, r0
-	mtspr	tbu, r0
+	mtspr	SPRN_TBWL, r0
+	mtspr	SPRN_TBWU, r0
 #endif
 
 	/*----------------------------------------------------------------*/
 	/* Setup interrupt vectors */
 	/*----------------------------------------------------------------*/
-	mtspr	ivpr,r0		/* Vectors start at 0x0000_0000 */
+	mtspr	SPRN_IVPR,r0		/* Vectors start at 0x0000_0000 */
 	li	r1,0x0100
-	mtspr	ivor0,r1	/* Critical input */
+	mtspr	SPRN_IVOR0,r1	/* Critical input */
 	li	r1,0x0200
-	mtspr	ivor1,r1	/* Machine check */
+	mtspr	SPRN_IVOR1,r1	/* Machine check */
 	li	r1,0x0300
-	mtspr	ivor2,r1	/* Data storage */
+	mtspr	SPRN_IVOR2,r1	/* Data storage */
 	li	r1,0x0400
-	mtspr	ivor3,r1	/* Instruction storage */
+	mtspr	SPRN_IVOR3,r1	/* Instruction storage */
 	li	r1,0x0500
-	mtspr	ivor4,r1	/* External interrupt */
+	mtspr	SPRN_IVOR4,r1	/* External interrupt */
 	li	r1,0x0600
-	mtspr	ivor5,r1	/* Alignment */
+	mtspr	SPRN_IVOR5,r1	/* Alignment */
 	li	r1,0x0700
-	mtspr	ivor6,r1	/* Program check */
+	mtspr	SPRN_IVOR6,r1	/* Program check */
 	li	r1,0x0800
-	mtspr	ivor7,r1	/* Floating point unavailable */
+	mtspr	SPRN_IVOR7,r1	/* Floating point unavailable */
 	li	r1,0x0c00
-	mtspr	ivor8,r1	/* System call */
+	mtspr	SPRN_IVOR8,r1	/* System call */
 	li	r1,0x0a00
-	mtspr	ivor9,r1	/* Auxiliary Processor unavailable */
+	mtspr	SPRN_IVOR9,r1	/* Auxiliary Processor unavailable */
 	li	r1,0x0900
-	mtspr	ivor10,r1	/* Decrementer */
+	mtspr	SPRN_IVOR10,r1	/* Decrementer */
 	li	r1,0x1300
-	mtspr	ivor13,r1	/* Data TLB error */
+	mtspr	SPRN_IVOR13,r1	/* Data TLB error */
 	li	r1,0x1400
-	mtspr	ivor14,r1	/* Instr TLB error */
+	mtspr	SPRN_IVOR14,r1	/* Instr TLB error */
 	li	r1,0x2000
-	mtspr	ivor15,r1	/* Debug */
+	mtspr	SPRN_IVOR15,r1	/* Debug */
 
 	/*----------------------------------------------------------------*/
 	/* Configure cache regions  */
 	/*----------------------------------------------------------------*/
-	mtspr	inv0,r0
-	mtspr	inv1,r0
-	mtspr	inv2,r0
-	mtspr	inv3,r0
-	mtspr	dnv0,r0
-	mtspr	dnv1,r0
-	mtspr	dnv2,r0
-	mtspr	dnv3,r0
-	mtspr	itv0,r0
-	mtspr	itv1,r0
-	mtspr	itv2,r0
-	mtspr	itv3,r0
-	mtspr	dtv0,r0
-	mtspr	dtv1,r0
-	mtspr	dtv2,r0
-	mtspr	dtv3,r0
+	mtspr	SPRN_INV0,r0
+	mtspr	SPRN_INV1,r0
+	mtspr	SPRN_INV2,r0
+	mtspr	SPRN_INV3,r0
+	mtspr	SPRN_DNV0,r0
+	mtspr	SPRN_DNV1,r0
+	mtspr	SPRN_DNV2,r0
+	mtspr	SPRN_DNV3,r0
+	mtspr	SPRN_ITV0,r0
+	mtspr	SPRN_ITV1,r0
+	mtspr	SPRN_ITV2,r0
+	mtspr	SPRN_ITV3,r0
+	mtspr	SPRN_DTV0,r0
+	mtspr	SPRN_DTV1,r0
+	mtspr	SPRN_DTV2,r0
+	mtspr	SPRN_DTV3,r0
 
 	/*----------------------------------------------------------------*/
 	/* Cache victim limits */
@@ -434,25 +434,30 @@ skip_debug_init:
 	*/
 	lis	r1,0x0001
 	ori	r1,r1,0xf800
-	mtspr	ivlim,r1
-	mtspr	dvlim,r1
+	mtspr	SPRN_IVLIM,r1
+	mtspr	SPRN_DVLIM,r1
 
 	/*----------------------------------------------------------------+
 	|Initialize MMUCR[STID] = 0.
 	+-----------------------------------------------------------------*/
-	mfspr	r0,mmucr
+	mfspr	r0,SPRN_MMUCR
 	addis	r1,0,0xFFFF
 	ori	r1,r1,0xFF00
 	and	r0,r0,r1
-	mtspr	mmucr,r0
+	mtspr	SPRN_MMUCR,r0
 
 	/*----------------------------------------------------------------*/
 	/* Clear all TLB entries -- TID = 0, TS = 0 */
 	/*----------------------------------------------------------------*/
 	addis	r0,0,0x0000
-	li	r1,0x003f	/* 64 TLB entries */
-	mtctr	r1
+#ifdef CONFIG_SYS_RAMBOOT
 	li	r4,0		/* Start with TLB #0 */
+#else
+	li	r4,1		/* Start with TLB #1 */
+#endif
+	li	r1,64		/* 64 TLB entries */
+	sub	r1,r1,r4	/* calculate last TLB # */
+	mtctr	r1
 rsttlb:
 #ifdef CONFIG_SYS_RAMBOOT
 	tlbre	r3,r4,0		/* Read contents from TLB word #0 to get EPN */
@@ -516,9 +521,9 @@ tlbnx2:	addi	r4,r4,1		/* Next TLB */
 	b	_start
 
 3:	li	r0,0
-	mtspr	srr1,r0		/* Keep things disabled for now */
+	mtspr	SPRN_SRR1,r0		/* Keep things disabled for now */
 	mflr	r1
-	mtspr	srr0,r1
+	mtspr	SPRN_SRR0,r1
 	rfi
 #endif /* CONFIG_440 */
 
@@ -622,12 +627,12 @@ _start:
 	/*----------------------------------------------------------------*/
 	li	r0,0x0000
 	lis	r1,0xffff
-	mtspr	dec,r0			/* prevent dec exceptions */
-	mtspr	tbl,r0			/* prevent fit & wdt exceptions */
-	mtspr	tbu,r0
-	mtspr	tsr,r1			/* clear all timer exception status */
-	mtspr	tcr,r0			/* disable all */
-	mtspr	esr,r0			/* clear exception syndrome register */
+	mtspr	SPRN_DEC,r0			/* prevent dec exceptions */
+	mtspr	SPRN_TBWL,r0			/* prevent fit & wdt exceptions */
+	mtspr	SPRN_TBWU,r0
+	mtspr	SPRN_TSR,r1			/* clear all timer exception status */
+	mtspr	SPRN_TCR,r0			/* disable all */
+	mtspr	SPRN_ESR,r0			/* clear exception syndrome register */
 	mtxer	r0			/* clear integer exception register */
 
 	/*----------------------------------------------------------------*/
@@ -638,10 +643,10 @@ _start:
 #if defined(CONFIG_SYS_INIT_DBCR)
 	lis	r1,0xffff
 	ori	r1,r1,0xffff
-	mtspr	dbsr,r1			/* Clear all status bits */
+	mtspr	SPRN_DBSR,r1			/* Clear all status bits */
 	lis	r0,CONFIG_SYS_INIT_DBCR@h
 	ori	r0,r0,CONFIG_SYS_INIT_DBCR@l
-	mtspr	dbcr0,r0
+	mtspr	SPRN_DBCR0,r0
 	isync
 #endif
 
@@ -680,17 +685,17 @@ _start:
 	/* 8. set TFLOOR/NFLOOR to 8 (-> 8*16*32 bytes locked -> 4k) */
 	lis	r1,0x0201
 	ori	r1,r1,0xf808
-	mtspr	dvlim,r1
+	mtspr	SPRN_DVLIM,r1
 	lis	r1,0x0808
 	ori	r1,r1,0x0808
-	mtspr	dnv0,r1
-	mtspr	dnv1,r1
-	mtspr	dnv2,r1
-	mtspr	dnv3,r1
-	mtspr	dtv0,r1
-	mtspr	dtv1,r1
-	mtspr	dtv2,r1
-	mtspr	dtv3,r1
+	mtspr	SPRN_DNV0,r1
+	mtspr	SPRN_DNV1,r1
+	mtspr	SPRN_DNV2,r1
+	mtspr	SPRN_DNV3,r1
+	mtspr	SPRN_DTV0,r1
+	mtspr	SPRN_DTV1,r1
+	mtspr	SPRN_DTV2,r1
+	mtspr	SPRN_DTV3,r1
 	msync
 	isync
 #endif /* CONFIG_SYS_INIT_RAM_DCACHE */
@@ -809,7 +814,7 @@ _start:
 	/* Set up some machine state registers. */
 	/*----------------------------------------------------------------------- */
 	addi	r0,r0,0x0000		/* initialize r0 to zero */
-	mtspr	esr,r0			/* clear Exception Syndrome Reg */
+	mtspr	SPRN_ESR,r0		/* clear Exception Syndrome Reg */
 	mttcr	r0			/* timer control register */
 	mtexier r0			/* disable all interrupts */
 	addis	r4,r0,0xFFFF		/* set r4 to 0xFFFFFFFF (status in the */
@@ -919,7 +924,7 @@ _start:
 	/*----------------------------------------------------------------------- */
 	addi	r4,r0,0x0000
 #if !defined(CONFIG_405EX)
-	mtspr	sgr,r4
+	mtspr	SPRN_SGR,r4
 #else
 	/*
 	 * On 405EX, completely clearing the SGR leads to PPC hangup
@@ -928,9 +933,9 @@ _start:
 	 */
 	lis	r3,0x0000
 	ori	r3,r3,0x7FFC
-	mtspr	sgr,r3
+	mtspr	SPRN_SGR,r3
 #endif
-	mtspr	dcwr,r4
+	mtspr	SPRN_DCWR,r4
 	mtesr	r4			/* clear Exception Syndrome Reg */
 	mttcr	r4			/* clear Timer Control Reg */
 	mtxer	r4			/* clear Fixed-Point Exception Reg */
@@ -1266,8 +1271,8 @@ crit_return:
 	REST_GPR(31, r1)
 	lwz	r2,_NIP(r1)	/* Restore environment */
 	lwz	r0,_MSR(r1)
-	mtspr	csrr0,r2
-	mtspr	csrr1,r0
+	mtspr	SPRN_CSRR0,r2
+	mtspr	SPRN_CSRR1,r0
 	lwz	r0,GPR0(r1)
 	lwz	r2,GPR2(r1)
 	lwz	r1,GPR1(r1)
@@ -1297,8 +1302,8 @@ mck_return:
 	REST_GPR(31, r1)
 	lwz	r2,_NIP(r1)	/* Restore environment */
 	lwz	r0,_MSR(r1)
-	mtspr	mcsrr0,r2
-	mtspr	mcsrr1,r0
+	mtspr	SPRN_MCSRR0,r2
+	mtspr	SPRN_MCSRR1,r0
 	lwz	r0,GPR0(r1)
 	lwz	r2,GPR2(r1)
 	lwz	r1,GPR1(r1)
@@ -1448,17 +1453,17 @@ relocate_code:
 	/* set TFLOOR/NFLOOR to 0 again */
 	lis	r6,0x0001
 	ori	r6,r6,0xf800
-	mtspr	dvlim,r6
+	mtspr	SPRN_DVLIM,r6
 	lis	r6,0x0000
 	ori	r6,r6,0x0000
-	mtspr	dnv0,r6
-	mtspr	dnv1,r6
-	mtspr	dnv2,r6
-	mtspr	dnv3,r6
-	mtspr	dtv0,r6
-	mtspr	dtv1,r6
-	mtspr	dtv2,r6
-	mtspr	dtv3,r6
+	mtspr	SPRN_DNV0,r6
+	mtspr	SPRN_DNV1,r6
+	mtspr	SPRN_DNV2,r6
+	mtspr	SPRN_DNV3,r6
+	mtspr	SPRN_DTV0,r6
+	mtspr	SPRN_DTV1,r6
+	mtspr	SPRN_DTV2,r6
+	mtspr	SPRN_DTV3,r6
 	msync
 	isync
 #endif /* CONFIG_SYS_INIT_RAM_DCACHE */
@@ -1478,8 +1483,8 @@ relocate_code:
 	isync
 
 	/* Clear all potential pending exceptions */
-	mfspr	r1,mcsr
-	mtspr	mcsr,r1
+	mfspr	r1,SPRN_MCSR
+	mtspr	SPRN_MCSR,r1
 #ifdef CONFIG_SYS_TLB_FOR_BOOT_FLASH
 	addi	r1,r0,CONFIG_SYS_TLB_FOR_BOOT_FLASH	/* Use defined TLB */
 #else
@@ -1723,9 +1728,9 @@ trap_init:
 __440_msr_set:
 	addi	r7,r0,0x1000		/* set ME bit (Machine Exceptions) */
 	oris	r7,r7,0x0002		/* set CE bit (Critical Exceptions) */
-	mtspr	srr1,r7
+	mtspr	SPRN_SRR1,r7
 	mflr	r7
-	mtspr	srr0,r7
+	mtspr	SPRN_SRR0,r7
 	rfi
 __440_msr_continue:
 #endif
@@ -2059,7 +2064,7 @@ pll_wait:
 	 * Not sure if this is needed...
 	 */
 	addis r3,0,0x1000
-	mtspr dbcr0,r3			/* This will cause a CPU core reset, and */
+	mtspr SPRN_DBCR0,r3		/* This will cause a CPU core reset, and */
 					/* execution will continue from the poweron */
 					/* vector of 0xfffffffc */
 #endif /* CONFIG_405EP */
diff --git a/include/asm-ppc/gpio.h b/include/asm-ppc/gpio.h
index fc05dc0..23e29b1 100644
--- a/include/asm-ppc/gpio.h
+++ b/include/asm-ppc/gpio.h
@@ -24,6 +24,8 @@
 #ifndef __ASM_PPC_GPIO_H
 #define __ASM_PPC_GPIO_H
 
+#include <asm/types.h>
+
 /* 4xx PPC's have 2 GPIO controllers */
 #if defined(CONFIG_405EZ) ||					\
 	defined(CONFIG_440EP) || defined(CONFIG_440GR) ||	\
@@ -34,6 +36,28 @@
 #define GPIO_GROUP_MAX	1
 #endif
 
+/* GPIO controller */
+struct ppc4xx_gpio {
+	u32 or;		/* Output Control */
+	u32 tcr;	/* Tri-State Control */
+	u32 osl;	/* Output Select 16..31 */
+	u32 osh;	/* Output Select 0..15 */
+	u32 tsl;	/* Tri-State Select 16..31 */
+	u32 tsh;	/* Tri-State Select 0..15 */
+	u32 odr;	/* Open Drain */
+	u32 ir;		/* Input */
+	u32 rr1;	/* Receive Register 1 */
+	u32 rr2;	/* Receive Register 2 */
+	u32 rr3;	/* Receive Register 3 */
+	u32 reserved;
+	u32 is1l;	/* Input Select 1 16..31 */
+	u32 is1h;	/* Input Select 1 0..15 */
+	u32 is2l;	/* Input Select 2 16..31 */
+	u32 is2h;	/* Input Select 2 0..15 */
+	u32 is3l;	/* Input Select 3 16..31 */
+	u32 is3h;	/* Input Select 3 0..15 */
+};
+
 /* Offsets */
 #define GPIOx_OR	0x00		/* GPIO Output Register */
 #define GPIOx_TCR	0x04		/* GPIO Three-State Control Register */
diff --git a/include/asm-ppc/ppc4xx_config.h b/include/asm-ppc/ppc4xx_config.h
new file mode 100644
index 0000000..49acb60
--- /dev/null
+++ b/include/asm-ppc/ppc4xx_config.h
@@ -0,0 +1,42 @@
+/*
+ * (C) Copyright 2008-2009
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * (C) Copyright 2009
+ * Dirk Eibach,  Guntermann & Drunck GmbH, eibach@gdsys.de
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+#ifndef __PPC4xx_CONFIG_H
+#define __PPC4xx_CONFIG_H
+
+#include <common.h>
+
+struct ppc4xx_config {
+	char label[16];
+	char description[64];
+	u8 val[CONFIG_4xx_CONFIG_BLOCKSIZE];
+};
+
+extern struct ppc4xx_config ppc4xx_config_val[];
+extern int ppc4xx_config_count;
+
+#endif /* __PPC4xx_CONFIG_H */
diff --git a/include/asm-ppc/processor.h b/include/asm-ppc/processor.h
index 65546ad..2c0c0ce 100644
--- a/include/asm-ppc/processor.h
+++ b/include/asm-ppc/processor.h
@@ -96,6 +96,10 @@
 #define CONFIG_BOOKE
 #endif
 
+#define SPRN_CCR0	0x3B3	/* Core Configuration Register 0 */
+#ifdef CONFIG_BOOKE
+#define SPRN_CCR1	0x378	/* Core Configuration Register for 440 only */
+#endif
 #define SPRN_CDBCR	0x3D7	/* Cache Debug Control Register */
 #define SPRN_CTR	0x009	/* Count Register */
 #define SPRN_DABR	0x3F5	/* Data Address Breakpoint Register */
@@ -166,6 +170,9 @@
 #define SPRN_DBSR	0x3F0	/* Debug Status Register */
 #else
 #define SPRN_DBCR1	0x135		/* Book E Debug Control Register 1 */
+#ifdef CONFIG_BOOKE
+#define	SPRN_DBDR	0x3f3		/* Debug Data Register */
+#endif
 #define SPRN_DBSR	0x130		/* Book E Debug Status Register */
 #define   DBSR_IC	    0x08000000	/* Book E Instruction Completion  */
 #define   DBSR_TIE	    0x01000000	/* Book E Trap Instruction Event */
@@ -173,6 +180,10 @@
 #define SPRN_DCCR	0x3FA	/* Data Cache Cacheability Register */
 #define   DCCR_NOCACHE		0	/* Noncacheable */
 #define   DCCR_CACHE		1	/* Cacheable */
+#ifndef CONFIG_BOOKE
+#define	SPRN_DCDBTRL	0x39c	/* Data Cache Debug Tag Register Low */
+#define	SPRN_DCDBTRH	0x39d	/* Data Cache Debug Tag Register High */
+#endif
 #define SPRN_DCMP	0x3D1	/* Data TLB Compare Register */
 #define SPRN_DCWR	0x3BA	/* Data Cache Write-thru Register */
 #define   DCWR_COPY		0	/* Copy-back */
@@ -184,7 +195,20 @@
 #endif /* CONFIG_BOOKE */
 #define SPRN_DEC	0x016	/* Decrement Register */
 #define SPRN_DMISS	0x3D0	/* Data TLB Miss Register */
+#ifdef CONFIG_BOOKE
+#define	SPRN_DNV0	0x390	/* Data Cache Normal Victim 0 */
+#define	SPRN_DNV1	0x391	/* Data Cache Normal Victim 1 */
+#define	SPRN_DNV2	0x392	/* Data Cache Normal Victim 2 */
+#define	SPRN_DNV3	0x393	/* Data Cache Normal Victim 3 */
+#endif
 #define SPRN_DSISR	0x012	/* Data Storage Interrupt Status Register */
+#ifdef CONFIG_BOOKE
+#define	SPRN_DTV0	0x394	/* Data Cache Transient Victim 0 */
+#define	SPRN_DTV1	0x395	/* Data Cache Transient Victim 1 */
+#define	SPRN_DTV2	0x396	/* Data Cache Transient Victim 2 */
+#define	SPRN_DTV3	0x397	/* Data Cache Transient Victim 3 */
+#define	SPRN_DVLIM	0x398	/* Data Cache Victim Limit */
+#endif
 #define SPRN_EAR	0x11A	/* External Address Register */
 #ifndef CONFIG_BOOKE
 #define SPRN_ESR	0x3D4	/* Exception Syndrome Register */
@@ -269,16 +293,34 @@
 #define   ICCR_NOCACHE		0	/* Noncacheable */
 #define   ICCR_CACHE		1	/* Cacheable */
 #define SPRN_ICDBDR	0x3D3	/* Instruction Cache Debug Data Register */
+#ifdef CONFIG_BOOKE
+#define SPRN_ICDBTRL	0x39e	/* instruction cache debug tag register low */
+#define	SPRN_ICDBTRH	0x39f	/* instruction cache debug tag register high */
+#endif
 #define SPRN_ICMP	0x3D5	/* Instruction TLB Compare Register */
 #define SPRN_ICTC	0x3FB	/* Instruction Cache Throttling Control Reg */
 #define SPRN_IMISS	0x3D4	/* Instruction TLB Miss Register */
 #define SPRN_IMMR	0x27E	/* Internal Memory Map Register */
+#ifdef CONFIG_BOOKE
+#define	SPRN_INV0	0x370	/* Instruction Cache Normal Victim 0 */
+#define	SPRN_INV1	0x371	/* Instruction Cache Normal Victim 1 */
+#define	SPRN_INV2	0x372	/* Instruction Cache Normal Victim 2 */
+#define	SPRN_INV3	0x373	/* Instruction Cache Normal Victim 3 */
+#define	SPRN_ITV0	0x374	/* Instruction Cache Transient Victim 0 */
+#define	SPRN_ITV1	0x375	/* Instruction Cache Transient Victim 1 */
+#define	SPRN_ITV2	0x376	/* Instruction Cache Transient Victim 2 */
+#define	SPRN_ITV3	0x377	/* Instruction Cache Transient Victim 3 */
+#define	SPRN_IVLIM	0x399	/* Instruction Cache Victim Limit */
+#endif
 #define SPRN_LDSTCR	0x3F8	/* Load/Store Control Register */
 #define SPRN_L2CR	0x3F9	/* Level 2 Cache Control Regsiter */
 #define SPRN_LR		0x008	/* Link Register */
 #define SPRN_MBAR	0x137	/* System memory base address */
 #define SPRN_MMCR0	0x3B8	/* Monitor Mode Control Register 0 */
 #define SPRN_MMCR1	0x3BC	/* Monitor Mode Control Register 1 */
+#ifdef CONFIG_BOOKE
+#define	SPRN_MMUCR	0x3b2	/* MMU Control Register */
+#endif
 #define SPRN_PBL1	0x3FC	/* Protection Bound Lower 1 */
 #define SPRN_PBL2	0x3FE	/* Protection Bound Lower 2 */
 #define SPRN_PBU1	0x3FD	/* Protection Bound Upper 1 */
@@ -297,6 +339,9 @@
 #define SPRN_PMC4	0x3BE	/* Performance Counter Register 4 */
 #define SPRN_PVR	0x11F	/* Processor Version Register */
 #define SPRN_RPA	0x3D6	/* Required Physical Address Register */
+#ifdef CONFIG_BOOKE
+#define	SPRN_RSTCFG	0x39b	/* Reset Configuration */
+#endif
 #define SPRN_SDA	0x3BF	/* Sampled Data Address Register */
 #define SPRN_SDR1	0x019	/* MMU Hash Base Register */
 #define SPRN_SGR	0x3B9	/* Storage Guarded Register */
@@ -315,6 +360,7 @@
 #define SPRN_SRR1	0x01B	/* Save/Restore Register 1 */
 #define SPRN_SRR2	0x3DE	/* Save/Restore Register 2 */
 #define SPRN_SRR3	0x3DF	/* Save/Restore Register 3 */
+
 #ifdef CONFIG_BOOKE
 #define SPRN_SVR	0x3FF	/* System Version Register */
 #else
diff --git a/include/configs/PMC405DE.h b/include/configs/PMC405DE.h
new file mode 100644
index 0000000..5232745
--- /dev/null
+++ b/include/configs/PMC405DE.h
@@ -0,0 +1,378 @@
+/*
+ * (C) Copyright 2009
+ * Matthias Fuchs, esd gmbh germany, matthias.fuchs@esd.eu
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#define CONFIG_405EP		1	/* This is a PPC405 CPU		*/
+#define CONFIG_4xx		1	/* ...member of PPC4xx family	*/
+#define CONFIG_PMC405DE		1	/* ...on a PMC405DE board	*/
+
+#define CONFIG_BOARD_EARLY_INIT_F 1	/* call board_early_init_f()	*/
+#define CONFIG_MISC_INIT_R	1	/* call misc_init_r()		*/
+#define CONFIG_BOARD_TYPES	1	/* support board types		*/
+
+#define CONFIG_SYS_CLK_FREQ	33330000 /* external frequency to pll	*/
+
+#define CONFIG_BAUDRATE		115200
+#define CONFIG_BOOTDELAY	3	/* autoboot after 3 seconds	*/
+
+#undef  CONFIG_BOOTARGS
+#undef  CONFIG_BOOTCOMMAND
+
+#define CONFIG_PREBOOT			/* enable preboot variable	*/
+
+#define CONFIG_SYS_LOADS_BAUD_CHANGE	1	/* allow baudrate change*/
+
+#define CONFIG_NET_MULTI	1
+#define CONFIG_HAS_ETH1
+
+#define CONFIG_PPC4xx_EMAC
+#define CONFIG_MII		1	/* MII PHY management		*/
+#define CONFIG_PHY_ADDR		1	/* PHY address			*/
+#define CONFIG_PHY1_ADDR	2	/* 2nd PHY address		*/
+
+#define CONFIG_SYS_RX_ETH_BUFFER	16 /* use 16 rx buffer on 405 emac */
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_SUBNETMASK
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_DNS
+#define CONFIG_BOOTP_DNS2
+#define CONFIG_BOOTP_SEND_HOSTNAME
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_BSP
+#define CONFIG_CMD_CHIP_CONFIG
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_IRQ
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_PING
+
+#define CONFIG_OF_LIBFDT
+#define CONFIG_OF_BOARD_SETUP
+
+#undef  CONFIG_WATCHDOG			/* watchdog disabled */
+#define CONFIG_SDRAM_BANK0	1	/* init onboard SDRAM bank 0 */
+#define CONFIG_PRAM		0
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CONFIG_SYS_LONGHELP
+#define CONFIG_SYS_PROMPT	"=> "	/* Monitor Command Prompt */
+
+#define CONFIG_SYS_CBSIZE	256	/* Console I/O Buffer Size */
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CONFIG_SYS_MAXARGS	16		/* max number of command args */
+#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE /* Boot Args Buffer Size */
+
+#define CONFIG_SYS_DEVICE_NULLDEV	1	/* include nulldev device */
+#define CONFIG_SYS_CONSOLE_INFO_QUIET	1	/* don't print console info */
+
+#define CONFIG_SYS_MEMTEST_START	0x0100000 /* memtest works on */
+#define CONFIG_SYS_MEMTEST_END		0x3000000 /* 1 ... 48 MB in DRAM */
+
+#undef  CONFIG_SYS_EXT_SERIAL_CLOCK
+#define CONFIG_SYS_BASE_BAUD		691200
+#define CONFIG_UART1_CONSOLE
+
+/* The following table includes the supported baudrates */
+#define CONFIG_SYS_BAUDRATE_TABLE	\
+	{ 9600, 19200, 38400, 57600, 115200 }
+
+#define CONFIG_SYS_LOAD_ADDR	0x100000	/* default load address */
+#define CONFIG_SYS_EXTBDINFO	1	/* To use extended board_into (bd_t) */
+
+#define CONFIG_SYS_HZ		1000	/* decrementer freq: 1 ms ticks */
+
+#define CONFIG_CMDLINE_EDITING	1	/* add command line history     */
+#define CONFIG_LOOPW		1	/* enable loopw command         */
+#define CONFIG_MX_CYCLIC	1	/* enable mdc/mwc commands      */
+#define CONFIG_ZERO_BOOTDELAY_CHECK	/* check for keypress on bootdelay==0 */
+#define CONFIG_VERSION_VARIABLE 1	/* include version env variable */
+
+#define CONFIG_AUTOBOOT_KEYED	1
+#define CONFIG_AUTOBOOT_PROMPT	\
+	"Press SPACE to abort autoboot in %d seconds\n", bootdelay
+#undef CONFIG_AUTOBOOT_DELAY_STR
+#define CONFIG_AUTOBOOT_STOP_STR " "
+
+/*
+ * PCI stuff
+ */
+#define PCI_HOST_ADAPTER	0	/* configure as pci adapter	*/
+#define PCI_HOST_FORCE		1	/* configure as pci host	*/
+#define PCI_HOST_AUTO		2	/* detected via arbiter enable	*/
+
+#define CONFIG_PCI		/* include pci support			*/
+#define CONFIG_PCI_HOST	PCI_HOST_AUTO  /* select pci host function	*/
+#define CONFIG_PCI_PNP		/* do (not) pci plug-and-play		*/
+
+#define CONFIG_PCI_SCAN_SHOW	/* show pci devices on startup		*/
+
+/*
+ * PCI identification
+ */
+#define CONFIG_SYS_PCI_SUBSYS_VENDORID		PCI_VENDOR_ID_ESDGMBH
+#define CONFIG_SYS_PCI_SUBSYS_ID_NONMONARCH 0x040e /* Dev ID: Non-Monarch */
+#define CONFIG_SYS_PCI_SUBSYS_ID_MONARCH 0x040f	/* Dev ID: Monarch */
+#define CONFIG_SYS_PCI_CLASSCODE_NONMONARCH	PCI_CLASS_PROCESSOR_POWERPC
+#define CONFIG_SYS_PCI_CLASSCODE_MONARCH	PCI_CLASS_BRIDGE_HOST
+
+#define CONFIG_SYS_PCI_CLASSCODE CONFIG_SYS_PCI_CLASSCODE_MONARCH
+#define CONFIG_SYS_PCI_SUBSYS_DEVICEID CONFIG_SYS_PCI_SUBSYS_ID_MONARCH
+
+#define CONFIG_SYS_PCI_PTM1LA  0x00000000      /* point to sdram */
+#define CONFIG_SYS_PCI_PTM1MS  0xfc000001      /* 64MB, enable=1 */
+#define CONFIG_SYS_PCI_PTM1PCI 0x00000000      /* Host: use this pci address */
+#define CONFIG_SYS_PCI_PTM2LA  0xef000000      /* point to CPLD, GPIO */
+#define CONFIG_SYS_PCI_PTM2MS  0xff000001      /* 16MB, enable=1 */
+#define CONFIG_SYS_PCI_PTM2PCI 0x04000000      /* Host: use this pci address */
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CONFIG_SYS_BOOTMAPSZ		(8 << 20)
+/*
+ * FLASH organization
+ */
+#define CONFIG_SYS_FLASH_CFI		1	/* CFI compatible */
+#define CONFIG_FLASH_CFI_DRIVER		1	/* Use common CFI driver */
+
+#define CONFIG_SYS_FLASH_BANKS_LIST	{ CONFIG_SYS_FLASH_BASE }
+
+#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max. no. memory banks */
+#define CONFIG_SYS_MAX_FLASH_SECT	512	/* max sectors per chip */
+
+#define CONFIG_SYS_FLASH_ERASE_TOUT	120000	/* erase timeout (in ms) */
+#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* write timeout (in ms) */
+
+#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1	/* buffered writes (faster) */
+#define CONFIG_SYS_FLASH_PROTECTION	1	/* hardware flash protection */
+
+#define CONFIG_SYS_FLASH_EMPTY_INFO	1 /* 'E' for empty sector (flinfo) */
+#define CONFIG_SYS_FLASH_QUIET_TEST	1 /* don't warn upon unknown flash */
+
+
+/*
+ * Start addresses for the final memory configuration
+ * (Set up by the startup code)
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
+ */
+#define CONFIG_SYS_SDRAM_BASE		0x00000000
+#define CONFIG_SYS_FLASH_BASE		0xfe000000
+#define CONFIG_SYS_MONITOR_BASE		TEXT_BASE
+#define CONFIG_SYS_MONITOR_LEN		(~(TEXT_BASE) + 1)
+#define CONFIG_SYS_MALLOC_LEN		(256 * 1024)
+
+/*
+ * Environment in EEPROM setup
+ */
+#define CONFIG_ENV_IS_IN_EEPROM		1
+#define CONFIG_ENV_OFFSET		0x100
+#define CONFIG_ENV_SIZE			0x700
+
+/*
+ * I2C EEPROM (24W16) for environment
+ */
+#define CONFIG_HARD_I2C			/* I2c with hardware support */
+#define CONFIG_SYS_I2C_SPEED		400000 /* I2C speed and slave address */
+#define CONFIG_SYS_I2C_SLAVE		0x7F
+
+#define CONFIG_SYS_I2C_EEPROM_ADDR	0x50	/* EEPROM 24W16	*/
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1	/* Bytes of address */
+/* mask of address bits that overflow into the "EEPROM chip address" */
+#define CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW	0x07
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 4	/* The Catalyst CAT24WC08 has */
+					/* 16 byte page write mode using*/
+					/* last 4 bits of the address */
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	10 /* and takes up to 10 msec */
+#define CONFIG_SYS_EEPROM_WREN		1
+
+#define CONFIG_4xx_CONFIG_I2C_EEPROM_ADDR	0x50
+#define CONFIG_4xx_CONFIG_I2C_EEPROM_OFFSET	0x40
+#define CONFIG_4xx_CONFIG_BLOCKSIZE		0x20
+
+/*
+ * RTC
+ */
+#define CONFIG_RTC_RX8025
+
+/*
+ * External Bus Controller (EBC) Setup
+ * (max. 55MHZ EBC clock)
+ */
+/* Memory Bank 0 (NOR flash) BAS=0xFE0,BS=32MB,BU=R/W,BW=16bit */
+#define CONFIG_SYS_EBC_PB0AP		0x03017200
+#define CONFIG_SYS_EBC_PB0CR		(CONFIG_SYS_FLASH_BASE | 0xba000)
+
+/* Memory Bank 1 (CPLD) BAS=0xEF0,BS=16MB,BU=R/W,BW=16bit */
+#define CONFIG_SYS_CPLD_BASE		0xef000000
+#define CONFIG_SYS_EBC_PB1AP		0x00800000
+#define CONFIG_SYS_EBC_PB1CR		(CONFIG_SYS_CPLD_BASE | 0x18000)
+
+/*
+ * Definitions for initial stack pointer and data area (in data cache)
+ */
+/* use on chip memory ( OCM ) for temperary stack until sdram is tested */
+#define CONFIG_SYS_TEMP_STACK_OCM	  1
+
+/* On Chip Memory location */
+#define CONFIG_SYS_OCM_DATA_ADDR	0xF8000000
+#define CONFIG_SYS_OCM_DATA_SIZE	0x1000
+/* inside SDRAM */
+#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_OCM_DATA_ADDR
+/* End of used area in RAM */
+#define CONFIG_SYS_INIT_RAM_END		CONFIG_SYS_OCM_DATA_SIZE
+
+#define CONFIG_SYS_GBL_DATA_SIZE	128 /* bytes res. for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - \
+					 CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
+
+/*
+ * GPIO Configuration
+ */
+#define CONFIG_SYS_4xx_GPIO_TABLE {                  /* GPIO    Alt1       */ \
+{                                                                             \
+/* GPIO Core 0 */                                                             \
+{ GPIO_BASE, GPIO_IN,  GPIO_SEL,  GPIO_OUT_NO_CHG }, /* GPIO0   PerBLast   */ \
+{ GPIO_BASE, GPIO_IN,  GPIO_SEL,  GPIO_OUT_NO_CHG }, /* GPIO1   TS1E       */ \
+{ GPIO_BASE, GPIO_IN,  GPIO_SEL,  GPIO_OUT_NO_CHG }, /* GPIO2   TS2E       */ \
+{ GPIO_BASE, GPIO_IN,  GPIO_SEL,  GPIO_OUT_NO_CHG }, /* GPIO3   TS1O       */ \
+{ GPIO_BASE, GPIO_IN,  GPIO_SEL,  GPIO_OUT_NO_CHG }, /* GPIO4   TS2O       */ \
+{ GPIO_BASE, GPIO_OUT, GPIO_SEL,  GPIO_OUT_1 },      /* GPIO5   TS3        */ \
+{ GPIO_BASE, GPIO_OUT, GPIO_SEL,  GPIO_OUT_1 },      /* GPIO6   TS4        */ \
+{ GPIO_BASE, GPIO_OUT, GPIO_SEL,  GPIO_OUT_1 },      /* GPIO7   TS5        */ \
+{ GPIO_BASE, GPIO_IN,  GPIO_SEL,  GPIO_OUT_NO_CHG }, /* GPIO8   TS6        */ \
+{ GPIO_BASE, GPIO_OUT, GPIO_SEL,  GPIO_OUT_1 },      /* GPIO9   TrcClk     */ \
+{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO10  PerCS1     */ \
+{ GPIO_BASE, GPIO_IN,  GPIO_SEL,  GPIO_OUT_NO_CHG }, /* GPIO11  PerCS2     */ \
+{ GPIO_BASE, GPIO_IN,  GPIO_SEL,  GPIO_OUT_NO_CHG }, /* GPIO12  PerCS3     */ \
+{ GPIO_BASE, GPIO_IN,  GPIO_SEL,  GPIO_OUT_NO_CHG }, /* GPIO13  PerCS4     */ \
+{ GPIO_BASE, GPIO_OUT, GPIO_SEL,  GPIO_OUT_NO_CHG }, /* GPIO14  PerAddr03  */ \
+{ GPIO_BASE, GPIO_OUT, GPIO_SEL,  GPIO_OUT_NO_CHG }, /* GPIO15  PerAddr04  */ \
+{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO16  PerAddr05  */ \
+{ GPIO_BASE, GPIO_IN,  GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO17  IRQ0       */ \
+{ GPIO_BASE, GPIO_IN,  GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO18  IRQ1       */ \
+{ GPIO_BASE, GPIO_IN,  GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO19  IRQ2       */ \
+{ GPIO_BASE, GPIO_IN,  GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO20  IRQ3       */ \
+{ GPIO_BASE, GPIO_IN,  GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO21  IRQ4       */ \
+{ GPIO_BASE, GPIO_IN,  GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO22  IRQ5       */ \
+{ GPIO_BASE, GPIO_IN,  GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO23  IRQ6       */ \
+{ GPIO_BASE, GPIO_IN,  GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO24  UART0_DCD  */ \
+{ GPIO_BASE, GPIO_OUT, GPIO_SEL,  GPIO_OUT_NO_CHG }, /* GPIO25  UART0_DSR  */ \
+{ GPIO_BASE, GPIO_OUT, GPIO_SEL,  GPIO_OUT_NO_CHG }, /* GPIO26  UART0_RI   */ \
+{ GPIO_BASE, GPIO_OUT, GPIO_SEL,  GPIO_OUT_NO_CHG }, /* GPIO27  UART0_DTR  */ \
+{ GPIO_BASE, GPIO_IN,  GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO28  UART1_Rx   */ \
+{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO29  UART1_Tx   */ \
+{ GPIO_BASE, GPIO_OUT, GPIO_SEL,  GPIO_OUT_NO_CHG }, /* GPIO30  RejectPkt0 */ \
+{ GPIO_BASE, GPIO_OUT, GPIO_SEL,  GPIO_OUT_NO_CHG }, /* GPIO31  RejectPkt1 */ \
+}                                                                             \
+}
+
+#define CONFIG_SYS_GPIO_HWREV_MASK	(0xf0000000 >> 1)	/* GPIO1..4 */
+#define CONFIG_SYS_GPIO_HWREV_SHIFT	27
+#define CONFIG_SYS_GPIO_LEDRUN_N	(0x80000000 >> 5)	/* GPIO5 */
+#define CONFIG_SYS_GPIO_LEDA_N		(0x80000000 >> 6)	/* GPIO6 */
+#define CONFIG_SYS_GPIO_LEDB_N		(0x80000000 >> 7)	/* GPIO7 */
+#define CONFIG_SYS_GPIO_SELFRST_N	(0x80000000 >> 8)	/* GPIO8 */
+#define CONFIG_SYS_GPIO_EEPROM_WP	(0x80000000 >> 9)	/* GPIO9 */
+#define CONFIG_SYS_GPIO_MONARCH_N	(0x80000000 >> 11)	/* GPIO11 */
+#define CONFIG_SYS_GPIO_EREADY		(0x80000000 >> 12)	/* GPIO12 */
+#define CONFIG_SYS_GPIO_M66EN		(0x80000000 >> 13)	/* GPIO13 */
+
+/*
+ * Default speed selection (cpu_plb_opb_ebc) in mhz.
+ * This value will be set if iic boot eprom is disabled.
+ */
+#undef CONFIG_SYS_FCPU333MHZ
+#define CONFIG_SYS_FCPU266MHZ
+#undef CONFIG_SYS_FCPU133MHZ
+
+#if defined(CONFIG_SYS_FCPU333MHZ)
+/*
+ * CPU: 333MHz
+ * PLB/SDRAM/MAL: 111MHz
+ * OPB: 55MHz
+ * EBC: 55MHz
+ * PCI: 55MHz (111MHz on M66EN=1)
+ */
+#define PLLMR0_DEFAULT (PLL_CPUDIV_1 | PLL_PLBDIV_3 |		\
+			PLL_OPBDIV_2 | PLL_EXTBUSDIV_2 |	\
+			PLL_MALDIV_1 | PLL_PCIDIV_2)
+#define PLLMR1_DEFAULT (PLL_FBKDIV_10  |			\
+			PLL_FWDDIVA_3 | PLL_FWDDIVB_3 |		\
+			PLL_TUNE_15_M_40 | PLL_TUNE_VCO_HI)
+#endif
+
+#if defined(CONFIG_SYS_FCPU266MHZ)
+/*
+ * CPU: 266MHz
+ * PLB/SDRAM/MAL: 133MHz
+ * OPB: 66MHz
+ * EBC: 44MHz
+ * PCI: 44MHz (66MHz on M66EN=1)
+ */
+#define PLLMR0_DEFAULT (PLL_CPUDIV_1 | PLL_PLBDIV_2 |		\
+			PLL_OPBDIV_2 | PLL_EXTBUSDIV_3 |	\
+			PLL_MALDIV_1 | PLL_PCIDIV_3)
+#define PLLMR1_DEFAULT (PLL_FBKDIV_8  |  \
+			PLL_FWDDIVA_3 | PLL_FWDDIVB_3 |		\
+			PLL_TUNE_15_M_40 | PLL_TUNE_VCO_LOW)
+#endif
+
+#if defined(CONFIG_SYS_FCPU133MHZ)
+/*
+ * CPU: 133MHz
+ * PLB/SDRAM/MAL: 133MHz
+ * OPB: 66MHz
+ * EBC: 44MHz
+ * PCI: 44MHz (66MHz on M66EN=1)
+ */
+#define PLLMR0_DEFAULT (PLL_CPUDIV_1 | PLL_PLBDIV_1 |		\
+			PLL_OPBDIV_2 | PLL_EXTBUSDIV_3 |	\
+			PLL_MALDIV_1 | PLL_PCIDIV_3)
+#define PLLMR1_DEFAULT (PLL_FBKDIV_4  |  \
+			PLL_FWDDIVA_6 | PLL_FWDDIVB_6 |		\
+			PLL_TUNE_15_M_40 | PLL_TUNE_VCO_LOW)
+#endif
+
+#endif /* __CONFIG_H */
diff --git a/include/configs/XPEDITE1000.h b/include/configs/XPEDITE1000.h
new file mode 100644
index 0000000..658e947
--- /dev/null
+++ b/include/configs/XPEDITE1000.h
@@ -0,0 +1,356 @@
+/*
+ * (C) Copyright 2002 Scott McNutt <smcnutt@artesyncp.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * config for XPedite1000 from XES Inc.
+ * Ported from EBONY config by Travis B. Sawyer <tsawyer@sandburst.com>
+ * (C) Copyright 2003 Sandburst Corporation
+ * board/config_EBONY.h - configuration for AMCC 440GP Ref (Ebony)
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/* High Level Configuration Options */
+#define CONFIG_XPEDITE1000	1
+#define CONFIG_SYS_BOARD_NAME	"XPedite1000"
+#define CONFIG_4xx		1		/* ... PPC4xx family */
+#define CONFIG_440		1
+#define CONFIG_440GX		1		/* 440 GX */
+#define CONFIG_BOARD_EARLY_INIT_F 1		/* Call board_pre_init	*/
+#define CONFIG_SYS_CLK_FREQ	33333333	/* external freq to pll */
+
+/*
+ * DDR config
+ */
+#define CONFIG_SPD_EEPROM		/* Use SPD EEPROM for setup */
+#define SPD_EEPROM_ADDRESS	{0x54}	/* SPD i2c spd addresses */
+#define CONFIG_VERY_BIG_RAM	1
+
+/*
+ * Base addresses -- Note these are effective addresses where the
+ * actual resources get mapped (not physical addresses)
+ */
+#define CONFIG_SYS_SDRAM_BASE		0x00000000
+#define CONFIG_SYS_FLASH_BASE		0xff000000	/* start of FLASH */
+#define CONFIG_SYS_MONITOR_BASE		TEXT_BASE	/* start of monitor */
+#define CONFIG_SYS_PCI_MEMBASE		0x80000000	/* mapped pci memory */
+#define CONFIG_SYS_PERIPHERAL_BASE	0xe0000000	/* internal peripherals */
+#define CONFIG_SYS_ISRAM_BASE		0xc0000000	/* internal SRAM */
+#define CONFIG_SYS_PCI_BASE		0xd0000000	/* internal PCI regs */
+#define CONFIG_SYS_NVRAM_BASE_ADDR	(CONFIG_SYS_PERIPHERAL_BASE + 0x08000000)
+#define CONFIG_SYS_GPIO_BASE		(CONFIG_SYS_PERIPHERAL_BASE + 0x00000700)
+
+/*
+ * Diagnostics
+ */
+#define CONFIG_SYS_ALT_MEMTEST
+#define CONFIG_SYS_MEMTEST_START	0x0400000
+#define CONFIG_SYS_MEMTEST_END		0x0C00000
+
+/* POST support */
+#define CONFIG_POST		(CONFIG_SYS_POST_RTC	| \
+				 CONFIG_SYS_POST_I2C)
+
+/*
+ * LED support
+ */
+#define USR_LED0	0x00000080
+#define USR_LED1	0x00000100
+#define USR_LED2	0x00000200
+#define USR_LED3	0x00000400
+
+#ifndef __ASSEMBLY__
+extern unsigned long in32(unsigned int);
+extern void out32(unsigned int, unsigned long);
+
+#define LED0_ON() out32(CONFIG_SYS_GPIO_BASE, (in32(CONFIG_SYS_GPIO_BASE) & ~USR_LED0))
+#define LED1_ON() out32(CONFIG_SYS_GPIO_BASE, (in32(CONFIG_SYS_GPIO_BASE) & ~USR_LED1))
+#define LED2_ON() out32(CONFIG_SYS_GPIO_BASE, (in32(CONFIG_SYS_GPIO_BASE) & ~USR_LED2))
+#define LED3_ON() out32(CONFIG_SYS_GPIO_BASE, (in32(CONFIG_SYS_GPIO_BASE) & ~USR_LED3))
+
+#define LED0_OFF() out32(CONFIG_SYS_GPIO_BASE, (in32(CONFIG_SYS_GPIO_BASE) | USR_LED0))
+#define LED1_OFF() out32(CONFIG_SYS_GPIO_BASE, (in32(CONFIG_SYS_GPIO_BASE) | USR_LED1))
+#define LED2_OFF() out32(CONFIG_SYS_GPIO_BASE, (in32(CONFIG_SYS_GPIO_BASE) | USR_LED2))
+#define LED3_OFF() out32(CONFIG_SYS_GPIO_BASE, (in32(CONFIG_SYS_GPIO_BASE) | USR_LED3))
+#endif
+
+/*
+ * Use internal SRAM for initial stack
+ */
+#define CONFIG_SYS_TEMP_STACK_OCM	1
+#define CONFIG_SYS_OCM_DATA_ADDR	CONFIG_SYS_ISRAM_BASE
+#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_ISRAM_BASE	/* Initial RAM address */
+#define CONFIG_SYS_INIT_RAM_END		0x2000	/* End of used area in RAM */
+#define CONFIG_SYS_GBL_DATA_SIZE	128	/* num bytes initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_POST_WORD_ADDR	(CONFIG_SYS_GBL_DATA_OFFSET - 0x4)
+#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_POST_WORD_ADDR
+
+#define CONFIG_SYS_MONITOR_LEN	(512 * 1024)	/* Reserve 512 KB for Mon */
+#define CONFIG_SYS_MALLOC_LEN	(1024 * 1024)	/* Reserved for malloc */
+
+/*
+ * Serial Port
+ */
+#define CONFIG_SYS_BAUDRATE_TABLE \
+	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400}
+#define CONFIG_BAUDRATE			115200
+#define CONFIG_LOADS_ECHO		1	/* echo on for serial download */
+#define CONFIG_SYS_LOADS_BAUD_CHANGE	1	/* allow baudrate change */
+
+/*
+ * Use the HUSH parser
+ */
+#define CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
+
+/*
+ * NOR flash configuration
+ */
+#define CONFIG_SYS_MAX_FLASH_BANKS	3
+#define CONFIG_SYS_FLASH_BANKS_LIST	{CONFIG_SYS_FLASH_BASE, 0xf0000000, 0xf4000000 }
+#define CONFIG_SYS_MAX_FLASH_SECT	512	/* sectors per device */
+#define CONFIG_FLASH_CFI_DRIVER
+#define CONFIG_SYS_FLASH_CFI
+#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
+#define CONFIG_SYS_FLASH_QUIET_TEST		/* MirrorBit flashes are optional */
+#define CONFIG_SYS_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms) */
+#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms) */
+
+/*
+ * I2C
+ */
+#define CONFIG_HARD_I2C			1	/* I2C with hardware support */
+#define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed and slave address */
+#define CONFIG_SYS_I2C_SLAVE		0x7f
+#define CONFIG_I2C_MULTI_BUS
+
+/* I2C EEPROM */
+#define CONFIG_SYS_I2C_EEPROM_ADDR		0x50
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN		1
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS	3
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	10
+
+/* I2C RTC: STMicro M41T00 */
+#define CONFIG_RTC_M41T11		1
+#define CONFIG_SYS_I2C_RTC_ADDR		0x68
+#define CONFIG_SYS_M41T11_BASE_YEAR	2000
+
+/*
+ * PCI
+ */
+/* General PCI */
+#define CONFIG_PCI				/* include pci support */
+#define CONFIG_PCI_PNP				/* do pci plug-and-play */
+#define CONFIG_PCI_SCAN_SHOW			/* show pci devices on startup */
+#define CONFIG_SYS_PCI_TARGBASE	0x80000000	/* PCIaddr mapped to CONFIG_SYS_PCI_MEMBASE */
+
+/* Board-specific PCI */
+#define CONFIG_SYS_PCI_TARGET_INIT		/* let board init pci target */
+#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x1014	/* IBM */
+#define CONFIG_SYS_PCI_SUBSYS_DEVICEID 0xcafe	/* Whatever */
+#define CONFIG_SYS_PCI_FORCE_PCI_CONV		/* Force PCI Conventional Mode */
+
+/*
+ * Networking options
+ */
+#define CONFIG_PPC4xx_EMAC
+#define CONFIG_PHY_GIGE		1	/* Include GbE speed/duplex detection */
+#define CONFIG_NET_MULTI	1
+#define CONFIG_MII		1	/* MII PHY management */
+#define CONFIG_PHY_RESET	1	/* reset phy upon startup */
+#define CONFIG_SYS_RX_ETH_BUFFER 32	/* Number of ethernet rx buffers & descriptors */
+#define CONFIG_ETHPRIME		"ppc_4xx_eth2"
+#define CONFIG_PHY_ADDR		4	/* PHY address phy0 not populated */
+#define CONFIG_PHY2_ADDR	4	/* PHY address phy2 */
+#define CONFIG_HAS_ETH2		1	/* add support for "eth2addr" */
+#define CONFIG_PHY3_ADDR	8	/* PHY address phy3 */
+#define CONFIG_HAS_ETH3		1	/* add support for "eth3addr" */
+
+/* BOOTP options */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+/*
+ * Command configuration
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_FLASH
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_IRQ
+#define CONFIG_CMD_JFFS2
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_SAVEENV
+#define CONFIG_CMD_SNTP
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CONFIG_SYS_LONGHELP			/* undef to save memory */
+#define CONFIG_SYS_LOAD_ADDR	0x100000	/* default load address */
+#define CONFIG_SYS_PROMPT	"=> "		/* Monitor Command Prompt */
+#define CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size */
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS	16		/* max number of command args */
+#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size */
+#define CONFIG_SYS_HZ		1000		/* decrementer freq: 1 ms ticks */
+#define CONFIG_CMDLINE_EDITING	1		/* Command-line editing */
+#define CONFIG_BOOTDELAY	3		/* -1 disables auto-boot */
+#define CONFIG_PANIC_HANG			/* do not reset board on panic */
+#define CONFIG_PREBOOT				/* enable preboot variable */
+#define CONFIG_FIT		1
+#define CONFIG_FIT_VERBOSE	1
+#define CONFIG_INTEGRITY			/* support booting INTEGRITY OS */
+#define CONFIG_SYS_EXTBDINFO	1		/* To use extended board_into (bd_t) */
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
+
+/*
+ * Boot Flags
+ */
+#define BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH */
+#define BOOTFLAG_WARM	0x02		/* Software reboot */
+
+/*
+ * Environment Configuration
+ */
+#define CONFIG_ENV_IS_IN_FLASH	1
+#define CONFIG_ENV_SECT_SIZE	0x20000 /* 128k (one sector) for env */
+#define CONFIG_ENV_SIZE		0x8000
+#define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE - (256 * 1024))
+
+/*
+ * Flash memory map:
+ * fff80000 - ffffffff	U-Boot (512 KB)
+ * fff40000 - fff7ffff	U-Boot Environment (256 KB)
+ * fff00000 - fff3ffff	FDT (256KB)
+ * ffc00000 - ffefffff	OS image (3MB)
+ * ff000000 - ffbfffff	OS Use/Filesystem (12MB)
+ */
+
+#define CONFIG_UBOOT_ENV_ADDR	MK_STR(TEXT_BASE)
+#define CONFIG_FDT_ENV_ADDR	MK_STR(0xfff00000)
+#define CONFIG_OS_ENV_ADDR	MK_STR(0xffc00000)
+
+#define CONFIG_PROG_UBOOT						\
+	"$download_cmd $loadaddr $ubootfile; "				\
+	"if test $? -eq 0; then "					\
+		"protect off "CONFIG_UBOOT_ENV_ADDR" +80000; "		\
+		"erase "CONFIG_UBOOT_ENV_ADDR" +80000; "		\
+		"cp.w $loadaddr "CONFIG_UBOOT_ENV_ADDR" 40000; "	\
+		"protect on "CONFIG_UBOOT_ENV_ADDR" +80000; "		\
+		"cmp.b $loadaddr "CONFIG_UBOOT_ENV_ADDR" 80000; "	\
+		"if test $? -ne 0; then "				\
+			"echo PROGRAM FAILED; "				\
+		"else; "						\
+			"echo PROGRAM SUCCEEDED; "			\
+		"fi; "							\
+	"else; "							\
+		"echo DOWNLOAD FAILED; "				\
+	"fi;"
+
+#define CONFIG_BOOT_OS_NET						\
+	"$download_cmd $osaddr $osfile; "				\
+	"if test $? -eq 0; then "					\
+		"if test -n $fdtaddr; then "				\
+			"$download_cmd $fdtaddr $fdtfile; "		\
+			"if test $? -eq 0; then "			\
+				"bootm $osaddr - $fdtaddr; "		\
+			"else; "					\
+				"echo FDT DOWNLOAD FAILED; "		\
+			"fi; "						\
+		"else; "						\
+			"bootm $osaddr; "				\
+		"fi; "							\
+	"else; "							\
+		"echo OS DOWNLOAD FAILED; "				\
+	"fi;"
+
+#define CONFIG_PROG_OS							\
+	"$download_cmd $osaddr $osfile; "				\
+	"if test $? -eq 0; then "					\
+		"erase "CONFIG_OS_ENV_ADDR" +$filesize; "		\
+		"cp.b $osaddr "CONFIG_OS_ENV_ADDR" $filesize; "		\
+		"cmp.b $osaddr "CONFIG_OS_ENV_ADDR" $filesize; "	\
+		"if test $? -ne 0; then "				\
+			"echo OS PROGRAM FAILED; "			\
+		"else; "						\
+			"echo OS PROGRAM SUCCEEDED; "			\
+		"fi; "							\
+	"else; "							\
+		"echo OS DOWNLOAD FAILED; "				\
+	"fi;"
+
+#define CONFIG_PROG_FDT							\
+	"$download_cmd $fdtaddr $fdtfile; "				\
+	"if test $? -eq 0; then "					\
+		"erase "CONFIG_FDT_ENV_ADDR" +$filesize;"		\
+		"cp.b $fdtaddr "CONFIG_FDT_ENV_ADDR" $filesize; "	\
+		"cmp.b $fdtaddr "CONFIG_FDT_ENV_ADDR" $filesize; "	\
+		"if test $? -ne 0; then "				\
+			"echo FDT PROGRAM FAILED; "			\
+		"else; "						\
+			"echo FDT PROGRAM SUCCEEDED; "			\
+		"fi; "							\
+	"else; "							\
+		"echo FDT DOWNLOAD FAILED; "				\
+	"fi;"
+
+#define	CONFIG_EXTRA_ENV_SETTINGS					\
+	"autoload=yes\0"						\
+	"download_cmd=tftp\0"						\
+	"console_args=console=ttyS0,115200\0"				\
+	"root_args=root=/dev/nfs rw\0"					\
+	"misc_args=ip=on\0"						\
+	"set_bootargs=setenv bootargs ${console_args} ${root_args} ${misc_args}\0" \
+	"bootfile=/home/user/file\0"					\
+	"osfile=/home/user/uImage-XPedite1000\0"			\
+	"fdtfile=/home/user/xpedite1000.dtb\0"				\
+	"ubootfile=/home/user/u-boot.bin\0"				\
+	"fdtaddr=c00000\0"						\
+	"osaddr=0x1000000\0"						\
+	"loadaddr=0x1000000\0"						\
+	"prog_uboot="CONFIG_PROG_UBOOT"\0"				\
+	"prog_os="CONFIG_PROG_OS"\0"					\
+	"prog_fdt="CONFIG_PROG_FDT"\0"					\
+	"bootcmd_net=run set_bootargs; "CONFIG_BOOT_OS_NET"\0"		\
+	"bootcmd_flash=run set_bootargs; "				\
+		"bootm "CONFIG_OS_ENV_ADDR" - "CONFIG_FDT_ENV_ADDR"\0"	\
+	"bootcmd=run bootcmd_flash\0"
+#endif	/* __CONFIG_H */
diff --git a/include/configs/XPEDITE1K.h b/include/configs/XPEDITE1K.h
deleted file mode 100644
index 74e55c9..0000000
--- a/include/configs/XPEDITE1K.h
+++ /dev/null
@@ -1,274 +0,0 @@
-/*
- * (C) Copyright 2002 Scott McNutt <smcnutt@artesyncp.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/************************************************************************
- * config for XPedite1000 from XES Inc.
- * Ported from EBONY config by Travis B. Sawyer <tsawyer@sandburst.com>
- * (C) Copyright 2003 Sandburst Corporation
- * board/config_EBONY.h - configuration for AMCC 440GP Ref (Ebony)
- ***********************************************************************/
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*-----------------------------------------------------------------------
- * High Level Configuration Options
- *----------------------------------------------------------------------*/
-#define CONFIG_XPEDITE1K	1		/* Board is XPedite 1000 */
-#define CONFIG_4xx		1		/* ... PPC4xx family	*/
-#define CONFIG_440		1
-#define CONFIG_440GX		1		/* 440 GX */
-#define CONFIG_BOARD_EARLY_INIT_F 1		/* Call board_pre_init	*/
-#define CONFIG_MISC_INIT_R
-#undef	CONFIG_SYS_DRAM_TEST				/* Disable-takes long time! */
-#define CONFIG_SYS_CLK_FREQ	33333333	/* external freq to pll */
-
-
-/* POST support */
-#define CONFIG_POST		(CONFIG_SYS_POST_RTC	   | \
-				 CONFIG_SYS_POST_I2C)
-
-/*-----------------------------------------------------------------------
- * Base addresses -- Note these are effective addresses where the
- * actual resources get mapped (not physical addresses)
- *----------------------------------------------------------------------*/
-#define CONFIG_SYS_SDRAM_BASE	    0x00000000		/* _must_ be 0		*/
-#define CONFIG_SYS_FLASH_BASE	    0xfff80000		/* start of FLASH	*/
-
-#define CONFIG_SYS_MONITOR_BASE    CONFIG_SYS_FLASH_BASE	/* start of monitor	*/
-#define CONFIG_SYS_PCI_MEMBASE	    0x80000000		/* mapped pci memory	*/
-#define CONFIG_SYS_PERIPHERAL_BASE 0xe0000000		/* internal peripherals */
-#define CONFIG_SYS_ISRAM_BASE	    0xc0000000		/* internal SRAM	*/
-#define CONFIG_SYS_PCI_BASE	    0xd0000000		/* internal PCI regs	*/
-
-#define CONFIG_SYS_NVRAM_BASE_ADDR (CONFIG_SYS_PERIPHERAL_BASE + 0x08000000)
-#define CONFIG_SYS_GPIO_BASE	    (CONFIG_SYS_PERIPHERAL_BASE + 0x00000700)
-
-#define USR_LED0	    0x00000080
-#define USR_LED1	    0x00000100
-#define USR_LED2	    0x00000200
-#define USR_LED3	    0x00000400
-
-#ifndef __ASSEMBLY__
-extern unsigned long in32(unsigned int);
-extern void out32(unsigned int, unsigned long);
-
-#define LED0_ON() out32(CONFIG_SYS_GPIO_BASE, (in32(CONFIG_SYS_GPIO_BASE) & ~USR_LED0))
-#define LED1_ON() out32(CONFIG_SYS_GPIO_BASE, (in32(CONFIG_SYS_GPIO_BASE) & ~USR_LED1))
-#define LED2_ON() out32(CONFIG_SYS_GPIO_BASE, (in32(CONFIG_SYS_GPIO_BASE) & ~USR_LED2))
-#define LED3_ON() out32(CONFIG_SYS_GPIO_BASE, (in32(CONFIG_SYS_GPIO_BASE) & ~USR_LED3))
-
-#define LED0_OFF() out32(CONFIG_SYS_GPIO_BASE, (in32(CONFIG_SYS_GPIO_BASE) | USR_LED0))
-#define LED1_OFF() out32(CONFIG_SYS_GPIO_BASE, (in32(CONFIG_SYS_GPIO_BASE) | USR_LED1))
-#define LED2_OFF() out32(CONFIG_SYS_GPIO_BASE, (in32(CONFIG_SYS_GPIO_BASE) | USR_LED2))
-#define LED3_OFF() out32(CONFIG_SYS_GPIO_BASE, (in32(CONFIG_SYS_GPIO_BASE) | USR_LED3))
-#endif
-
-/*-----------------------------------------------------------------------
- * Initial RAM & stack pointer (placed in internal SRAM)
- *----------------------------------------------------------------------*/
-#define CONFIG_SYS_TEMP_STACK_OCM  1
-#define CONFIG_SYS_OCM_DATA_ADDR   CONFIG_SYS_ISRAM_BASE
-#define CONFIG_SYS_INIT_RAM_ADDR   CONFIG_SYS_ISRAM_BASE  /* Initial RAM address	*/
-#define CONFIG_SYS_INIT_RAM_END    0x2000	    /* End of used area in RAM	*/
-#define CONFIG_SYS_GBL_DATA_SIZE   128		    /* num bytes initial data	*/
-
-
-#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
-#define CONFIG_SYS_POST_WORD_ADDR  (CONFIG_SYS_GBL_DATA_OFFSET - 0x4)
-#define CONFIG_SYS_INIT_SP_OFFSET  CONFIG_SYS_POST_WORD_ADDR
-
-#define CONFIG_SYS_MONITOR_LEN	    (256 * 1024)    /* Reserve 256 kB for Mon	*/
-#define CONFIG_SYS_MALLOC_LEN	    (128 * 1024)    /* Reserve 128 kB for malloc*/
-
-/*-----------------------------------------------------------------------
- * Serial Port
- *----------------------------------------------------------------------*/
-#undef	CONFIG_SERIAL_SOFTWARE_FIFO
-#define CONFIG_BAUDRATE		9600
-
-#define CONFIG_SYS_BAUDRATE_TABLE  \
-    {300, 600, 1200, 2400, 4800, 9600, 19200, 38400}
-
-/*-----------------------------------------------------------------------
- * NVRAM/RTC
- *
- * NOTE: Upper 8 bytes of NVRAM is where the RTC registers are located.
- * The DS1743 code assumes this condition (i.e. -- it assumes the base
- * address for the RTC registers is:
- *
- *	CONFIG_SYS_NVRAM_BASE_ADDR + CONFIG_SYS_NVRAM_SIZE
- *
- *----------------------------------------------------------------------*/
-/* TBS:	 Xpedite 1000 has STMicro M41T00 via IIC */
-#define CONFIG_RTC_M41T11 1
-#define CONFIG_SYS_I2C_RTC_ADDR 0x68
-#define CONFIG_SYS_M41T11_BASE_YEAR 2000
-
-/*-----------------------------------------------------------------------
- * FLASH related
- *----------------------------------------------------------------------*/
-#define CONFIG_SYS_MAX_FLASH_BANKS	1		    /* number of banks	    */
-#define CONFIG_SYS_MAX_FLASH_SECT	8		    /* sectors per device   */
-
-#undef	CONFIG_SYS_FLASH_CHECKSUM
-#define CONFIG_SYS_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
-#define CONFIG_SYS_FLASH_WRITE_TOUT	500	    /* Timeout for Flash Write (in ms)	*/
-
-/*-----------------------------------------------------------------------
- * DDR SDRAM
- *----------------------------------------------------------------------*/
-#define CONFIG_SPD_EEPROM		/* Use SPD EEPROM for setup	*/
-#define SPD_EEPROM_ADDRESS {0x54}	/* SPD i2c spd addresses	*/
-#define CONFIG_VERY_BIG_RAM 1
-/*-----------------------------------------------------------------------
- * I2C
- *----------------------------------------------------------------------*/
-#define CONFIG_HARD_I2C		1	    /* I2C with hardware support	*/
-#undef	CONFIG_SOFT_I2C			    /* I2C bit-banged		*/
-#define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed and slave address	*/
-#define CONFIG_SYS_I2C_SLAVE		0x7f
-#define CONFIG_SYS_I2C_NOPROBES	{0x55,0x56,0x57,0x58,0x59,0x5a,0x5b,0x5c,0x69}	/* Don't probe these addrs */
-
-/*-----------------------------------------------------------------------
- * Environment
- *----------------------------------------------------------------------*/
-#define CONFIG_ENV_IS_IN_EEPROM 1
-#define CONFIG_ENV_SIZE		0x100	    /* Size of Environment vars */
-#define CONFIG_ENV_OFFSET		0x100
-#define CONFIG_SYS_I2C_EEPROM_ADDR	0x50		/* this is actually the second page of the eeprom */
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10
-
-#define CONFIG_BOOTARGS		"root=/dev/hda1 "
-#define CONFIG_BOOTCOMMAND	"bootm ffc00000"    /* autoboot command */
-#define CONFIG_BOOTDELAY	5		    /* disable autoboot */
-#define CONFIG_BAUDRATE		9600
-
-#define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
-#define CONFIG_SYS_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/
-
-#define CONFIG_PPC4xx_EMAC
-#define CONFIG_MII			1	/* MII PHY management		*/
-#define CONFIG_PHY_ADDR		0	/* PHY address phy0 not populated */
-#define CONFIG_PHY1_ADDR	1	/* PHY address phy1 not populated */
-#define CONFIG_PHY2_ADDR	4	/* PHY address phy2 */
-#define CONFIG_PHY3_ADDR	8	/* PHY address phy3 */
-#define CONFIG_NET_MULTI	1
-#define CONFIG_PHY_GIGE		1	/* Include GbE speed/duplex detection */
-#define CONFIG_PHY_RESET        1       /* reset phy upon startup         */
-#define CONFIG_SYS_RX_ETH_BUFFER   32	/* Number of ethernet rx buffers & descriptors */
-
-#define CONFIG_HAS_ETH1		1	/* add support for "eth1addr"	*/
-#define CONFIG_HAS_ETH2		1	/* add support for "eth2addr"	*/
-#define CONFIG_HAS_ETH3		1	/* add support for "eth3addr"	*/
-
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_PCI
-#define CONFIG_CMD_IRQ
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_DATE
-#define CONFIG_CMD_BEDBUG
-#define CONFIG_CMD_EEPROM
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_ELF
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_DIAG
-#define CONFIG_CMD_FAT
-
-
-#undef CONFIG_WATCHDOG			/* watchdog disabled		*/
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP			/* undef to save memory		*/
-#define CONFIG_SYS_PROMPT	"=> "		/* Monitor Command Prompt	*/
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size	*/
-#else
-#define CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size	*/
-#endif
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS	16		/* max number of command args	*/
-#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
-
-#define CONFIG_SYS_MEMTEST_START	0x0400000	/* memtest works on	*/
-#define CONFIG_SYS_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM	*/
-
-#define CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address */
-#define CONFIG_SYS_EXTBDINFO		1	/* To use extended board_into (bd_t) */
-
-#define CONFIG_SYS_HZ		1000		/* decrementer freq: 1 ms ticks */
-
-
-/*-----------------------------------------------------------------------
- * PCI stuff
- *-----------------------------------------------------------------------
- */
-/* General PCI */
-#define CONFIG_PCI				    /* include pci support		*/
-#define CONFIG_PCI_PNP				/* do pci plug-and-play		*/
-#define CONFIG_PCI_SCAN_SHOW		/* show pci devices on startup	*/
-#define CONFIG_SYS_PCI_TARGBASE    0x80000000	/* PCIaddr mapped to CONFIG_SYS_PCI_MEMBASE */
-
-/* Board-specific PCI */
-#define CONFIG_SYS_PCI_TARGET_INIT		    /* let board init pci target    */
-
-#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x1014	/* IBM */
-#define CONFIG_SYS_PCI_SUBSYS_DEVICEID 0xcafe	/* Whatever */
-#define CONFIG_SYS_PCI_FORCE_PCI_CONV          /* Force PCI Conventional Mode */
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- */
-#define CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
-
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH	*/
-#define BOOTFLAG_WARM	0x02		/* Software reboot			*/
-
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
-#endif
-#endif	/* __CONFIG_H */
diff --git a/include/configs/canyonlands.h b/include/configs/canyonlands.h
index d22d411..217a8ee 100644
--- a/include/configs/canyonlands.h
+++ b/include/configs/canyonlands.h
@@ -330,6 +330,11 @@
 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS	3
 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	10
 
+/* I2C bootstrap EEPROM */
+#define CONFIG_4xx_CONFIG_I2C_EEPROM_ADDR	0x52
+#define CONFIG_4xx_CONFIG_I2C_EEPROM_OFFSET	0
+#define CONFIG_4xx_CONFIG_BLOCKSIZE		16
+
 /* I2C SYSMON (LM75, AD7414 is almost compatible)			*/
 #define CONFIG_DTT_LM75		1		/* ON Semi's LM75	*/
 #define CONFIG_DTT_AD7414	1		/* use AD7414		*/
@@ -442,6 +447,7 @@
 /*
  * Commands additional to the ones defined in amcc-common.h
  */
+#define CONFIG_CMD_CHIP_CONFIG
 #if defined(CONFIG_ARCHES)
 #define CONFIG_CMD_DTT
 #define CONFIG_CMD_PCI
diff --git a/include/configs/dlvision.h b/include/configs/dlvision.h
new file mode 100644
index 0000000..4533799
--- /dev/null
+++ b/include/configs/dlvision.h
@@ -0,0 +1,225 @@
+/*
+ * (C) Copyright 2009
+ * Dirk Eibach,  Guntermann & Drunck GmbH, eibach@gdsys.de
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#define CONFIG_405EP		1	/* this is a PPC405 CPU */
+#define CONFIG_4xx		1	/*  member of PPC4xx family */
+#define CONFIG_DLVISION	        1	/*  on a Neo board */
+
+/*
+ * Include common defines/options for all AMCC eval boards
+ */
+#define CONFIG_HOSTNAME		dlvision
+#define CONFIG_IDENT_STRING	" dlvision 0.01"
+#include "amcc-common.h"
+
+#define CONFIG_BOARD_EARLY_INIT_F	/* call board_early_init_f */
+#define CONFIG_MISC_INIT_R		/* call misc_init_r */
+
+#define CONFIG_SYS_CLK_FREQ	33333333 /* external frequency to pll   */
+
+/*
+ * Configure PLL
+ */
+#define PLLMR0_DEFAULT PLLMR0_266_133_66_33
+#define PLLMR1_DEFAULT PLLMR1_266_133_66_33
+
+/* new uImage format support */
+#define CONFIG_FIT
+#define CONFIG_FIT_VERBOSE	/* enable fit_format_{error,warning}() */
+
+#define CONFIG_ENV_IS_IN_FLASH	/* use FLASH for environment vars */
+
+/*
+ * Default environment variables
+ */
+#define	CONFIG_EXTRA_ENV_SETTINGS					\
+	CONFIG_AMCC_DEF_ENV						\
+	CONFIG_AMCC_DEF_ENV_POWERPC					\
+	CONFIG_AMCC_DEF_ENV_NOR_UPD					\
+	"kernel_addr=fc000000\0"					\
+	"fdt_addr=fc1e0000\0"						\
+	"ramdisk_addr=fc200000\0"					\
+	""
+
+#define CONFIG_PHY_ADDR		4	/* PHY address			*/
+#define CONFIG_HAS_ETH0
+#define CONFIG_HAS_ETH1
+#define CONFIG_PHY1_ADDR	0xc	/* EMAC1 PHY address		*/
+#define CONFIG_PHY_CLK_FREQ    EMAC_STACR_CLK_66MHZ
+
+/*
+ * Commands additional to the ones defined in amcc-common.h
+ */
+#define CONFIG_CMD_CACHE
+#undef CONFIG_CMD_EEPROM
+
+/*
+ * SDRAM configuration (please see cpu/ppc/sdram.[ch])
+ */
+#define CONFIG_SDRAM_BANK0	1	/* init onboard SDRAM bank 0 */
+
+/* SDRAM timings used in datasheet */
+#define CONFIG_SYS_SDRAM_CL             3	/* CAS latency */
+#define CONFIG_SYS_SDRAM_tRP           20	/* PRECHARGE command period */
+#define CONFIG_SYS_SDRAM_tRC           66	/* ACTIVE-to-ACTIVE period */
+#define CONFIG_SYS_SDRAM_tRCD          20	/* ACTIVE-to-READ delay */
+#define CONFIG_SYS_SDRAM_tRFC          66	/* Auto refresh period */
+
+/*
+ * If CONFIG_SYS_EXT_SERIAL_CLOCK, then the UART divisor is 1.
+ * If CONFIG_SYS_405_UART_ERRATA_59, then UART divisor is 31.
+ * Otherwise, UART divisor is determined by CPU Clock and CONFIG_SYS_BASE_BAUD.
+ * The Linux BASE_BAUD define should match this configuration.
+ *    baseBaud = cpuClock/(uartDivisor*16)
+ * If CONFIG_SYS_405_UART_ERRATA_59 and 200MHz CPU clock,
+ * set Linux BASE_BAUD to 403200.
+ */
+#undef	CONFIG_SERIAL_SOFTWARE_FIFO
+#undef  CONFIG_SYS_EXT_SERIAL_CLOCK           /* external serial clock */
+#undef  CONFIG_SYS_405_UART_ERRATA_59         /* 405GP/CR Rev. D silicon */
+#define CONFIG_SYS_BASE_BAUD		691200
+
+/*
+ * I2C stuff
+ */
+#define CONFIG_SYS_I2C_SPEED		100000	/* I2C speed and slave address*/
+
+/*
+ * FLASH organization
+ */
+#define CONFIG_SYS_FLASH_CFI		/* The flash is CFI compatible	*/
+#define CONFIG_FLASH_CFI_DRIVER		/* Use common CFI driver	*/
+
+#define CONFIG_SYS_FLASH_BASE		0xFC000000
+#define CONFIG_SYS_FLASH_BANKS_LIST	{ CONFIG_SYS_FLASH_BASE }
+
+#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max num of memory banks */
+#define CONFIG_SYS_MAX_FLASH_SECT	512	/* max num of sectors per chip*/
+
+#define CONFIG_SYS_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase/ms */
+#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write/ms */
+
+#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1	/* use buff'd writes */
+#define CONFIG_SYS_FLASH_PROTECTION	1	/* use hardware flash protect */
+
+#define CONFIG_SYS_FLASH_EMPTY_INFO	/* 'E' for empty sector on flinfo */
+#define CONFIG_SYS_FLASH_QUIET_TEST	1	/* no warn upon unknown flash */
+
+#ifdef CONFIG_ENV_IS_IN_FLASH
+#define CONFIG_ENV_SECT_SIZE	0x20000	/* size of one complete sector */
+#define CONFIG_ENV_ADDR		((-CONFIG_SYS_MONITOR_LEN)-CONFIG_ENV_SECT_SIZE)
+#define	CONFIG_ENV_SIZE		0x2000	/* Total Size of Environment Sector */
+
+/* Address and size of Redundant Environment Sector	*/
+#define CONFIG_ENV_ADDR_REDUND	(CONFIG_ENV_ADDR-CONFIG_ENV_SECT_SIZE)
+#define CONFIG_ENV_SIZE_REDUND	(CONFIG_ENV_SIZE)
+#endif
+
+/*
+ * PPC405 GPIO Configuration
+ */
+#define CONFIG_SYS_4xx_GPIO_TABLE { /* GPIO	Alternate1	*/ \
+{ \
+/* GPIO Core 0 */ \
+{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO0	PerBLast */ \
+{ GPIO_BASE, GPIO_OUT, GPIO_SEL,  GPIO_OUT_NO_CHG }, /* GPIO1	TS1E */ \
+{ GPIO_BASE, GPIO_OUT, GPIO_SEL,  GPIO_OUT_NO_CHG }, /* GPIO2	TS2E */ \
+{ GPIO_BASE, GPIO_IN,  GPIO_SEL,  GPIO_OUT_NO_CHG }, /* GPIO3	TS1O */ \
+{ GPIO_BASE, GPIO_OUT, GPIO_SEL,  GPIO_OUT_NO_CHG }, /* GPIO4	TS2O */ \
+{ GPIO_BASE, GPIO_OUT, GPIO_SEL,  GPIO_OUT_1      }, /* GPIO5	TS3 */ \
+{ GPIO_BASE, GPIO_OUT, GPIO_SEL,  GPIO_OUT_NO_CHG }, /* GPIO6	TS4 */ \
+{ GPIO_BASE, GPIO_OUT, GPIO_SEL,  GPIO_OUT_NO_CHG }, /* GPIO7	TS5 */ \
+{ GPIO_BASE, GPIO_OUT, GPIO_SEL,  GPIO_OUT_NO_CHG }, /* GPIO8	TS6 */ \
+{ GPIO_BASE, GPIO_OUT, GPIO_SEL,  GPIO_OUT_NO_CHG }, /* GPIO9	TrcClk */ \
+{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO10	PerCS1 */ \
+{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO11	PerCS2 */ \
+{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO12	PerCS3 */ \
+{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO13	PerCS4 */ \
+{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO14	PerAddr03 */ \
+{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO15	PerAddr04 */ \
+{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO16	PerAddr05 */ \
+{ GPIO_BASE, GPIO_IN,  GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO17	IRQ0 */ \
+{ GPIO_BASE, GPIO_IN,  GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO18	IRQ1 */ \
+{ GPIO_BASE, GPIO_IN,  GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO19	IRQ2 */ \
+{ GPIO_BASE, GPIO_IN,  GPIO_SEL,  GPIO_OUT_NO_CHG }, /* GPIO20	IRQ3 */ \
+{ GPIO_BASE, GPIO_OUT, GPIO_SEL,  GPIO_OUT_NO_CHG }, /* GPIO21	IRQ4 */ \
+{ GPIO_BASE, GPIO_OUT, GPIO_SEL,  GPIO_OUT_NO_CHG }, /* GPIO22	IRQ5 */ \
+{ GPIO_BASE, GPIO_IN,  GPIO_SEL,  GPIO_OUT_NO_CHG }, /* GPIO23	IRQ6 */ \
+{ GPIO_BASE, GPIO_IN,  GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO24	UART0_DCD */ \
+{ GPIO_BASE, GPIO_IN,  GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO25	UART0_DSR */ \
+{ GPIO_BASE, GPIO_IN,  GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO26	UART0_RI */ \
+{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO27	UART0_DTR */ \
+{ GPIO_BASE, GPIO_IN,  GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO28	UART1_Rx */ \
+{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO29	UART1_Tx */ \
+{ GPIO_BASE, GPIO_OUT, GPIO_SEL,  GPIO_OUT_NO_CHG }, /* GPIO30	RejectPkt0 */ \
+{ GPIO_BASE, GPIO_IN,  GPIO_SEL,  GPIO_OUT_NO_CHG }, /* GPIO31	RejectPkt1 */ \
+} \
+}
+
+/*
+ * Definitions for initial stack pointer and data area (in data cache)
+ */
+/* use on chip memory (OCM) for temperary stack until sdram is tested */
+#define CONFIG_SYS_TEMP_STACK_OCM        1
+
+/* On Chip Memory location */
+#define CONFIG_SYS_OCM_DATA_ADDR	0xF8000000
+#define CONFIG_SYS_OCM_DATA_SIZE	0x1000
+#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_OCM_DATA_ADDR /* in SDRAM */
+#define CONFIG_SYS_INIT_RAM_END	CONFIG_SYS_OCM_DATA_SIZE /* End of used area */
+
+#define CONFIG_SYS_GBL_DATA_SIZE	128  /* size/bytes res'd for init data*/
+#define CONFIG_SYS_GBL_DATA_OFFSET \
+	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
+
+/*
+ * External Bus Controller (EBC) Setup
+ */
+
+/* Memory Bank 0 (NOR-FLASH) initialization */
+#define CONFIG_SYS_EBC_PB0AP		0x92015480
+/* BAS=0xFC0,BS=64MB,BU=R/W,BW=16bit */
+#define CONFIG_SYS_EBC_PB0CR		0xFC0DA000
+
+/* Memory Bank 1 (NVRAM) initializatio */
+#define CONFIG_SYS_EBC_PB1AP		0x92015480
+/* BAS=0xFF8,BS=4MB,BU=R/W,BW=8bit  */
+#define CONFIG_SYS_EBC_PB1CR		0xFB858000
+
+/* Memory Bank 2 (UART) initialization */
+#define CONFIG_UART_BASE		0x7f100000
+#define CONFIG_SYS_EBC_PB2AP		0x92015480
+/* BAS=0x7f1,BS=1MB,BU=R/W,BW=8bit */
+#define CONFIG_SYS_EBC_PB2CR		0x7f118000
+
+/* Memory Bank 3 (Latches) initialization */
+#define CONFIG_SYS_LATCH_BASE		0x7f200000
+#define CONFIG_SYS_EBC_PB3AP		0x92015480
+/* BAS=0x7f2,BS=1MB,BU=R/W,BW=16bit */
+#define CONFIG_SYS_EBC_PB3CR		0x7f21a000
+
+#endif	/* __CONFIG_H */
diff --git a/include/configs/kilauea.h b/include/configs/kilauea.h
index df1b061..44bcbc0 100644
--- a/include/configs/kilauea.h
+++ b/include/configs/kilauea.h
@@ -374,9 +374,15 @@
  *----------------------------------------------------------------------*/
 #define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed and slave address	*/
 
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	6	/* 24C02 requires 5ms delay */
 #define CONFIG_SYS_I2C_EEPROM_ADDR	0x52	/* I2C boot EEPROM (24C02BN)	*/
 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN	1	/* Bytes of address		*/
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS	3
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	10
+
+/* I2C bootstrap EEPROM */
+#define CONFIG_4xx_CONFIG_I2C_EEPROM_ADDR	0x52
+#define CONFIG_4xx_CONFIG_I2C_EEPROM_OFFSET	0
+#define CONFIG_4xx_CONFIG_BLOCKSIZE		16
 
 /* Standard DTT sensor configuration */
 #define CONFIG_DTT_DS1775	1
@@ -426,6 +432,7 @@
 /*
  * Commands additional to the ones defined in amcc-common.h
  */
+#define CONFIG_CMD_CHIP_CONFIG
 #define CONFIG_CMD_DATE
 #define CONFIG_CMD_LOG
 #define CONFIG_CMD_NAND
diff --git a/include/ppc405.h b/include/ppc405.h
index 917afec..a17dd35 100644
--- a/include/ppc405.h
+++ b/include/ppc405.h
@@ -32,61 +32,6 @@
 #define CONFIG_SYS_DCACHE_SIZE		(2 << 10)	/* For PLX IOP480 (403)	*/
 #endif
 
-/*--------------------------------------------------------------------- */
-/* Special Purpose Registers						*/
-/*--------------------------------------------------------------------- */
-	#define  srr2  0x3de	  /* save/restore register 2 */
-	#define  srr3  0x3df	  /* save/restore register 3 */
-
-	/*
-	 * 405 does not really have CSRR0/1 but SRR2/3 are used during critical
-	 * exception for the exact same purposes - let's alias them and have a
-	 * common handling in crit_return() and CRIT_EXCEPTION
-	 */
-	#define  csrr0 srr2
-	#define  csrr1 srr3
-
-	#define  dbsr  0x3f0	  /* debug status register */
-	#define  dbcr0 0x3f2	  /* debug control register 0 */
-	#define  dbcr1 0x3bd	  /* debug control register 1 */
-	#define  iac1  0x3f4	  /* instruction address comparator 1 */
-	#define  iac2  0x3f5	  /* instruction address comparator 2 */
-	#define  iac3  0x3b4	  /* instruction address comparator 3 */
-	#define  iac4  0x3b5	  /* instruction address comparator 4 */
-	#define  dac1  0x3f6	  /* data address comparator 1 */
-	#define  dac2  0x3f7	  /* data address comparator 2 */
-	#define  dccr  0x3fa	  /* data cache control register */
-	#define  iccr  0x3fb	  /* instruction cache control register */
-	#define  esr   0x3d4	  /* execption syndrome register */
-	#define  dear  0x3d5	  /* data exeption address register */
-	#define  evpr  0x3d6	  /* exeption vector prefix register */
-	#define  tsr   0x3d8	  /* timer status register */
-	#define  tcr   0x3da	  /* timer control register */
-	#define  pit   0x3db	  /* programmable interval timer */
-	#define  sgr   0x3b9	  /* storage guarded reg      */
-	#define  dcwr  0x3ba	  /* data cache write-thru reg*/
-	#define  sler  0x3bb	  /* storage little-endian reg */
-	#define  cdbcr 0x3d7	  /* cache debug cntrl reg    */
-	#define  icdbdr 0x3d3	  /* instr cache dbug data reg*/
-	#define  ccr0  0x3b3	  /* core configuration register */
-	#define  dvc1  0x3b6	  /* data value compare register 1 */
-	#define  dvc2  0x3b7	  /* data value compare register 2 */
-	#define  pid   0x3b1	  /* process ID */
-	#define  su0r  0x3bc	  /* storage user-defined register 0 */
-	#define  zpr   0x3b0	  /* zone protection regsiter */
-
-	#define  tbl   0x11c	  /* time base lower - privileged write */
-	#define  tbu   0x11d	  /* time base upper - privileged write */
-
-	#define  sprg4r 0x104	  /* Special purpose general 4 - read only */
-	#define  sprg5r 0x105	  /* Special purpose general 5 - read only */
-	#define  sprg6r 0x106	  /* Special purpose general 6 - read only */
-	#define  sprg7r 0x107	  /* Special purpose general 7 - read only */
-	#define  sprg4w 0x114	  /* Special purpose general 4 - write only */
-	#define  sprg5w 0x115	  /* Special purpose general 5 - write only */
-	#define  sprg6w 0x116	  /* Special purpose general 6 - write only */
-	#define  sprg7w 0x117	  /* Special purpose general 7 - write only */
-
 /******************************************************************************
  * Special for PPC405GP
  ******************************************************************************/
diff --git a/include/ppc440.h b/include/ppc440.h
index 01f6eaf..6ce53a6 100644
--- a/include/ppc440.h
+++ b/include/ppc440.h
@@ -48,99 +48,6 @@
 
 #define CONFIG_SYS_DCACHE_SIZE		(32 << 10)	/* For AMCC 440 CPUs	*/
 
-/*--------------------------------------------------------------------- */
-/* Special Purpose Registers						*/
-/*--------------------------------------------------------------------- */
-#define	 xer_reg 0x001
-#define	 lr_reg	0x008
-#define	 dec	0x016	/* decrementer */
-#define	 srr0	0x01a	/* save/restore register 0 */
-#define	 srr1	0x01b	/* save/restore register 1 */
-#define	 pid	0x030	/* process id */
-#define	 decar	0x036	/* decrementer auto-reload */
-#define	 csrr0	0x03a	/* critical save/restore register 0 */
-#define	 csrr1	0x03b	/* critical save/restore register 1 */
-#define	 dear	0x03d	/* data exception address register */
-#define	 esr	0x03e	/* exception syndrome register */
-#define	 ivpr	0x03f	/* interrupt prefix register */
-#define	 usprg0 0x100	/* user special purpose register general 0 */
-#define	 usprg1 0x110	/* user special purpose register general 1 */
-#define	 tblr	0x10c	/* time base lower, read only */
-#define	 tbur	0x10d	/* time base upper, read only */
-#define	 sprg1	0x111	/* special purpose register general 1 */
-#define	 sprg2	0x112	/* special purpose register general 2 */
-#define	 sprg3	0x113	/* special purpose register general 3 */
-#define	 sprg4	0x114	/* special purpose register general 4 */
-#define	 sprg5	0x115	/* special purpose register general 5 */
-#define	 sprg6	0x116	/* special purpose register general 6 */
-#define	 sprg7	0x117	/* special purpose register general 7 */
-#define	 tbl	0x11c	/* time base lower (supervisor)*/
-#define	 tbu	0x11d	/* time base upper (supervisor)*/
-#define	 pir	0x11e	/* processor id register */
-#define	 dbsr	0x130	/* debug status register */
-#define	 dbcr0	0x134	/* debug control register 0 */
-#define	 dbcr1	0x135	/* debug control register 1 */
-#define	 dbcr2	0x136	/* debug control register 2 */
-#define	 iac1	0x138	/* instruction address compare 1 */
-#define	 iac2	0x139	/* instruction address compare 2 */
-#define	 iac3	0x13a	/* instruction address compare 3 */
-#define	 iac4	0x13b	/* instruction address compare 4 */
-#define	 dac1	0x13c	/* data address compare 1 */
-#define	 dac2	0x13d	/* data address compare 2 */
-#define	 dvc1	0x13e	/* data value compare 1 */
-#define	 dvc2	0x13f	/* data value compare 2 */
-#define	 tsr	0x150	/* timer status register */
-#define	 tcr	0x154	/* timer control register */
-#define	 ivor0	0x190	/* interrupt vector offset register 0 */
-#define	 ivor1	0x191	/* interrupt vector offset register 1 */
-#define	 ivor2	0x192	/* interrupt vector offset register 2 */
-#define	 ivor3	0x193	/* interrupt vector offset register 3 */
-#define	 ivor4	0x194	/* interrupt vector offset register 4 */
-#define	 ivor5	0x195	/* interrupt vector offset register 5 */
-#define	 ivor6	0x196	/* interrupt vector offset register 6 */
-#define	 ivor7	0x197	/* interrupt vector offset register 7 */
-#define	 ivor8	0x198	/* interrupt vector offset register 8 */
-#define	 ivor9	0x199	/* interrupt vector offset register 9 */
-#define	 ivor10 0x19a	/* interrupt vector offset register 10 */
-#define	 ivor11 0x19b	/* interrupt vector offset register 11 */
-#define	 ivor12 0x19c	/* interrupt vector offset register 12 */
-#define	 ivor13 0x19d	/* interrupt vector offset register 13 */
-#define	 ivor14 0x19e	/* interrupt vector offset register 14 */
-#define	 ivor15 0x19f	/* interrupt vector offset register 15 */
-#if defined(CONFIG_440)
-#define	 mcsrr0 0x23a	/* machine check save/restore register 0 */
-#define	 mcsrr1 0x23b	/* mahcine check save/restore register 1 */
-#define	 mcsr	0x23c	/* machine check status register */
-#endif
-#define	 inv0	0x370	/* instruction cache normal victim 0 */
-#define	 inv1	0x371	/* instruction cache normal victim 1 */
-#define	 inv2	0x372	/* instruction cache normal victim 2 */
-#define	 inv3	0x373	/* instruction cache normal victim 3 */
-#define	 itv0	0x374	/* instruction cache transient victim 0 */
-#define	 itv1	0x375	/* instruction cache transient victim 1 */
-#define	 itv2	0x376	/* instruction cache transient victim 2 */
-#define	 itv3	0x377	/* instruction cache transient victim 3 */
-#define	 dnv0	0x390	/* data cache normal victim 0 */
-#define	 dnv1	0x391	/* data cache normal victim 1 */
-#define	 dnv2	0x392	/* data cache normal victim 2 */
-#define	 dnv3	0x393	/* data cache normal victim 3 */
-#define	 dtv0	0x394	/* data cache transient victim 0 */
-#define	 dtv1	0x395	/* data cache transient victim 1 */
-#define	 dtv2	0x396	/* data cache transient victim 2 */
-#define	 dtv3	0x397	/* data cache transient victim 3 */
-#define	 dvlim	0x398	/* data cache victim limit */
-#define	 ivlim	0x399	/* instruction cache victim limit */
-#define	 rstcfg 0x39b	/* reset configuration */
-#define	 dcdbtrl 0x39c	/* data cache debug tag register low */
-#define	 dcdbtrh 0x39d	/* data cache debug tag register high */
-#define	 icdbtrl 0x39e	/* instruction cache debug tag register low */
-#define	 icdbtrh 0x39f	/* instruction cache debug tag register high */
-#define	 mmucr	0x3b2	/* mmu control register */
-#define	 ccr0	0x3b3	/* core configuration register 0 */
-#define  ccr1	0x378	/* core configuration for 440x5 only */
-#define	 icdbdr 0x3d3	/* instruction cache debug data register */
-#define	 dbdr	0x3f3	/* debug data register */
-
 /******************************************************************************
  * DCRs & Related
  ******************************************************************************/
diff --git a/post/cpu/ppc4xx/fpu.c b/post/cpu/ppc4xx/fpu.c
index fff4169..e9b96dd 100644
--- a/post/cpu/ppc4xx/fpu.c
+++ b/post/cpu/ppc4xx/fpu.c
@@ -34,7 +34,7 @@
 
 int fpu_status(void)
 {
-	if (mfspr(ccr0) & CCR0_DAPUIB)
+	if (mfspr(SPRN_CCR0) & CCR0_DAPUIB)
 		return 0; /* Disabled */
 	else
 		return 1; /* Enabled */
@@ -43,14 +43,14 @@ int fpu_status(void)
 
 void fpu_disable(void)
 {
-	mtspr(ccr0, mfspr(ccr0) | CCR0_DAPUIB);
+	mtspr(SPRN_CCR0, mfspr(SPRN_CCR0) | CCR0_DAPUIB);
 	mtmsr(mfmsr() & ~MSR_FP);
 }
 
 
 void fpu_enable(void)
 {
-	mtspr(ccr0, mfspr(ccr0) & ~CCR0_DAPUIB);
+	mtspr(SPRN_CCR0, mfspr(SPRN_CCR0) & ~CCR0_DAPUIB);
 	mtmsr(mfmsr() | MSR_FP);
 }