diff options
author | Simon Glass <sjg@chromium.org> | 2015-08-30 19:19:28 -0600 |
---|---|---|
committer | Tom Rini <trini@konsulko.com> | 2015-09-11 15:00:22 -0400 |
commit | f73db66d6205438e499c725416c222642167c6d9 (patch) | |
tree | d080d7b453751a9d20ae58fe2f5599e09edc16ee | |
parent | 7650beb7ca905729891984e117443544157448d0 (diff) | |
download | u-boot-imx-f73db66d6205438e499c725416c222642167c6d9.zip u-boot-imx-f73db66d6205438e499c725416c222642167c6d9.tar.gz u-boot-imx-f73db66d6205438e499c725416c222642167c6d9.tar.bz2 |
arm: Remove tk71 board
This board has not been converted to generic board by the deadline.
Remove it.
Signed-off-by: Simon Glass <sjg@chromium.org>
-rw-r--r-- | arch/arm/mach-kirkwood/Kconfig | 4 | ||||
-rw-r--r-- | board/karo/tk71/Kconfig | 12 | ||||
-rw-r--r-- | board/karo/tk71/MAINTAINERS | 6 | ||||
-rw-r--r-- | board/karo/tk71/Makefile | 9 | ||||
-rw-r--r-- | board/karo/tk71/kwbimage.cfg | 158 | ||||
-rw-r--r-- | board/karo/tk71/tk71.c | 150 | ||||
-rw-r--r-- | configs/tk71_defconfig | 6 | ||||
-rw-r--r-- | include/configs/tk71.h | 112 |
8 files changed, 0 insertions, 457 deletions
diff --git a/arch/arm/mach-kirkwood/Kconfig b/arch/arm/mach-kirkwood/Kconfig index 3002c04..c053602 100644 --- a/arch/arm/mach-kirkwood/Kconfig +++ b/arch/arm/mach-kirkwood/Kconfig @@ -25,9 +25,6 @@ config TARGET_DNS325 config TARGET_ICONNECT bool "iconnect Board" -config TARGET_TK71 - bool "TK71 Board" - config TARGET_KM_KIRKWOOD bool "KM_KIRKWOOD Board" @@ -64,7 +61,6 @@ source "board/buffalo/lsxl/Kconfig" source "board/cloudengines/pogo_e02/Kconfig" source "board/d-link/dns325/Kconfig" source "board/iomega/iconnect/Kconfig" -source "board/karo/tk71/Kconfig" source "board/keymile/km_arm/Kconfig" source "board/LaCie/net2big_v2/Kconfig" source "board/LaCie/netspace_v2/Kconfig" diff --git a/board/karo/tk71/Kconfig b/board/karo/tk71/Kconfig deleted file mode 100644 index 7b3d548..0000000 --- a/board/karo/tk71/Kconfig +++ /dev/null @@ -1,12 +0,0 @@ -if TARGET_TK71 - -config SYS_BOARD - default "tk71" - -config SYS_VENDOR - default "karo" - -config SYS_CONFIG_NAME - default "tk71" - -endif diff --git a/board/karo/tk71/MAINTAINERS b/board/karo/tk71/MAINTAINERS deleted file mode 100644 index ac85d6b..0000000 --- a/board/karo/tk71/MAINTAINERS +++ /dev/null @@ -1,6 +0,0 @@ -TK71 BOARD -#M: - -S: Maintained -F: board/karo/tk71/ -F: include/configs/tk71.h -F: configs/tk71_defconfig diff --git a/board/karo/tk71/Makefile b/board/karo/tk71/Makefile deleted file mode 100644 index 0e0df77..0000000 --- a/board/karo/tk71/Makefile +++ /dev/null @@ -1,9 +0,0 @@ -# -# Copyright (C) 2012 Marek Vasut <marex@denx.de> -# on behalf of DENX Software Engineering GmbH -# -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y := tk71.o diff --git a/board/karo/tk71/kwbimage.cfg b/board/karo/tk71/kwbimage.cfg deleted file mode 100644 index a32e27c..0000000 --- a/board/karo/tk71/kwbimage.cfg +++ /dev/null @@ -1,158 +0,0 @@ -# -# (C) Copyright 2009 -# Marvell Semiconductor <www.marvell.com> -# Written-by: Prafulla Wadaskar <prafulla@marvell.com> -# -# adopted to TK71 by -# Nils Faerber <nils.faerber@kernelconcepts.de> -# -# SPDX-License-Identifier: GPL-2.0+ -# -# Refer doc/README.kwbimage for more details about how-to configure -# and create kirkwood boot image -# - -# Boot Media configurations -BOOT_FROM nand -NAND_ECC_MODE default -NAND_PAGE_SIZE 0x0800 - -# SOC registers configuration using bootrom header extension -# Maximum KWBIMAGE_MAX_CONFIG configurations allowed - -# Configure RGMII-0 interface pad voltage to 1.8V -DATA 0xFFD100e0 0x1b1b1b9b - -#Dram initalization for SINGLE x16 CL=5 @ 400MHz -DATA 0xFFD01400 0x43000c30 # DDR Configuration register -# bit13-0: 0xc30 (3120 DDR2 clks refresh rate) -# bit23-14: zero -# bit24: 1= enable exit self refresh mode on DDR access -# bit25: 1 required -# bit29-26: zero -# bit31-30: 01 - -DATA 0xFFD01404 0x36543000 # DDR Controller Control Low -# bit 4: 0=addr/cmd in smame cycle -# bit 5: 0=clk is driven during self refresh, we don't care for APX -# bit 6: 0=use recommended falling edge of clk for addr/cmd -# bit14: 0=input buffer always powered up -# bit18: 1=cpu lock transaction enabled -# bit23-20: 5=recommended value for CL=5 and STARTBURST_DEL disabled bit31=0 -# bit27-24: 7= CL+2, STARTBURST sample stages, for freqs 400MHz, unbuffered DIMM -# bit30-28: 3 required -# bit31: 0=no additional STARTBURST delay - -DATA 0xFFD01408 0x1101355b # DDR Timing (Low) (active cycles value +1) -# bit3-0: TRAS lsbs -# bit7-4: TRCD -# bit11- 8: TRP -# bit15-12: TWR -# bit19-16: TWTR -# bit20: TRAS msb -# bit23-21: 0x0 -# bit27-24: TRRD -# bit31-28: TRTP - -DATA 0xFFD0140C 0x00000034 # DDR Timing (High) -# bit6-0: TRFC -# bit8-7: TR2R -# bit10-9: TR2W -# bit12-11: TW2W -# bit31-13: zero required - -DATA 0xFFD01410 0x00000000 # DDR Address Control -# bit1-0: 01, Cs0width=x16 -# bit3-2: 10, Cs0size=512Mb -# bit5-4: 01, Cs1width=x16 -# bit7-6: 10, Cs1size=512Mb -# bit9-8: 00, Cs2width=nonexistent -# bit11-10: 00, Cs2size =nonexistent -# bit13-12: 00, Cs3width=nonexistent -# bit15-14: 00, Cs3size =nonexistent -# bit16: 0, Cs0AddrSel -# bit17: 0, Cs1AddrSel -# bit18: 0, Cs2AddrSel -# bit19: 0, Cs3AddrSel -# bit31-20: 0 required - -DATA 0xFFD01414 0x00000000 # DDR Open Pages Control -# bit0: 0, OpenPage enabled -# bit31-1: 0 required - -DATA 0xFFD01418 0x00000000 # DDR Operation -# bit3-0: 0x0, DDR cmd -# bit31-4: 0 required - -DATA 0xFFD0141C 0x00000652 # DDR Mode -# bit2-0: 2, BurstLen=2 required -# bit3: 0, BurstType=0 required -# bit6-4: 4, CL=5 -# bit7: 0, TestMode=0 normal -# bit8: 0, DLL reset=0 normal -# bit11-9: 6, auto-precharge write recovery ???????????? -# bit12: 0, PD must be zero -# bit31-13: 0 required - -DATA 0xFFD01420 0x00000042 # DDR Extended Mode -# bit0: 0, DDR DLL enabled -# bit1: 0, DDR drive strenght normal -# bit2: 0, DDR ODT control lsd (disabled) -# bit5-3: 000, required -# bit6: 1, DDR ODT control msb, (disabled) -# bit9-7: 000, required -# bit10: 0, differential DQS enabled -# bit11: 0, required -# bit12: 0, DDR output buffer enabled -# bit31-13: 0 required - -DATA 0xFFD01424 0x0000F17F # DDR Controller Control High -# bit2-0: 111, required -# bit3 : 1 , MBUS Burst Chop disabled -# bit6-4: 111, required -# bit7 : 0 -# bit8 : 1 , add writepath sample stage, must be 1 for DDR freq >= 300MHz -# bit9 : 0 , no half clock cycle addition to dataout -# bit10 : 0 , 1/4 clock cycle skew enabled for addr/ctl signals -# bit11 : 0 , 1/4 clock cycle skew disabled for write mesh -# bit15-12: 1111 required -# bit31-16: 0 required - -DATA 0xFFD01428 0x00085520 # DDR2 ODT Read Timing (default values) -DATA 0xFFD0147C 0x00008552 # DDR2 ODT Write Timing (default values) - -DATA 0xFFD01500 0x00000000 # CS[0]n Base address to 0x0 -DATA 0xFFD01504 0x1FFFFFF1 # CS[0]n Size -# bit0: 1, Window enabled -# bit1: 0, Write Protect disabled -# bit3-2: 00, CS0 hit selected -# bit23-4: ones, required -# bit31-24: 0x0F, Size (i.e. 256MB) - -DATA 0xFFD01508 0x00000000 # CS[1]n Base address to 256Mb -DATA 0xFFD0150C 0x00000000 # CS[1]n Size 256Mb Window enabled for CS1 - -DATA 0xFFD01514 0x00000000 # CS[2]n Size, window disabled -DATA 0xFFD0151C 0x00000000 # CS[3]n Size, window disabled - -DATA 0xFFD01494 0x00110000 # DDR ODT Control (Low) -# bit3-0: 0010, (read) M_ODT[0] is asserted during read from DRAM CS1 -# bit7-4: 0001, (read) M_ODT[1] is asserted during read from DRAM CS0 -# bit19-16: 0010, (write) M_ODT[0] is asserted during write to DRAM CS1. -# bit23-20: 0001, (write) M_ODT[1] is asserted during write to DRAM CS0. -DATA 0xFFD01498 0x00000000 # DDR ODT Control (High) -# bit1-0: 00, ODT0 controlled by ODT Control (low) register above -# bit3-2: 01, ODT1 active NEVER! -# bit31-4: zero, required - -DATA 0xFFD0149C 0x0000F80F # CPU ODT Control -# bit3-0: 1111, internal ODT is asserted during read from DRAM bank 0-3 -# bit11-10: 01, M_DQ, M_DM, and M_DQS I/O buffer ODT Select: 150 ohm -# bit13-12: 10, M_STARTBURST_IN I/O buffer ODT Select: 75 ohm -# bit14: 1, M_STARTBURST_IN ODT: Enabled -# bit15: 1, DDR IO ODT Unit: Use ODT block -DATA 0xFFD01480 0x00000001 # DDR Initialization Control -#bit0=1, enable DDR init upon this register write - -# End of Header extension -DATA 0x0 0x0 diff --git a/board/karo/tk71/tk71.c b/board/karo/tk71/tk71.c deleted file mode 100644 index 35546d2..0000000 --- a/board/karo/tk71/tk71.c +++ /dev/null @@ -1,150 +0,0 @@ -/* - * Copyright (C) 2012 Marek Vasut <marex@denx.de> - * on behalf of DENX Software Engineering GmbH - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <miiphy.h> -#include <asm/arch/cpu.h> -#include <asm/arch/soc.h> -#include <asm/arch/mpp.h> -#include <asm/io.h> - -DECLARE_GLOBAL_DATA_PTR; - -#define TK71_OE_LOW (~0) -#define TK71_OE_HIGH (~0) -#define TK71_OE_VAL_LOW (0) -#define TK71_OE_VAL_HIGH (0) - -int board_early_init_f(void) -{ - /* - * default gpio configuration - * There are maximum 64 gpios controlled through 2 sets of registers - * the below configuration configures mainly initial LED status - */ - mvebu_config_gpio(TK71_OE_VAL_LOW, - TK71_OE_VAL_HIGH, - TK71_OE_LOW, TK71_OE_HIGH); - - /* Multi-Purpose Pins Functionality configuration */ - static const u32 kwmpp_config[] = { - MPP0_NF_IO2, - MPP1_NF_IO3, - MPP2_NF_IO4, - MPP3_NF_IO5, - MPP4_NF_IO6, - MPP5_NF_IO7, - MPP6_SYSRST_OUTn, - MPP7_GPO, - MPP8_TW_SDA, - MPP9_TW_SCK, - MPP10_UART0_TXD, - MPP11_UART0_RXD, - MPP12_SD_CLK, - MPP13_SD_CMD, - MPP14_SD_D0, - MPP15_SD_D1, - MPP16_SD_D2, - MPP17_SD_D3, - MPP18_NF_IO0, - MPP19_NF_IO1, - MPP20_GE1_0, - MPP21_GE1_1, - MPP22_GE1_2, - MPP23_GE1_3, - MPP24_GE1_4, - MPP25_GE1_5, - MPP26_GE1_6, - MPP27_GE1_7, - MPP28_GPIO, - MPP29_GPIO, - MPP30_GE1_10, - MPP31_GE1_11, - MPP32_GE1_12, - MPP33_GE1_13, - MPP34_GPIO, - MPP35_GPIO, - MPP36_GPIO, - MPP37_GPIO, - MPP38_GPIO, - MPP39_GPIO, - MPP40_GPIO, - MPP41_GPIO, - MPP42_GPIO, - MPP43_GPIO, - MPP44_GPIO, - MPP45_GPIO, - MPP46_GPIO, - MPP47_GPIO, - MPP48_GPIO, - MPP49_GPIO, - 0 - }; - kirkwood_mpp_conf(kwmpp_config, NULL); - - return 0; -} - -int board_init(void) -{ - /* - * arch number of board - */ - gd->bd->bi_arch_number = CONFIG_MACH_TYPE; - - /* adress of boot parameters */ - gd->bd->bi_boot_params = mvebu_sdram_bar(0) + 0x100; - - return 0; -} - -#ifdef CONFIG_CMD_NET - -#define MV88E1116_MAC_CTRL2_REG 21 -#define MV88E1116_PGADR_REG 22 -#define MV88E1116_RGMII_TXTM_CTRL (1 << 4) -#define MV88E1116_RGMII_RXTM_CTRL (1 << 5) - -static void mv_phy_88e1118_init(char *name) -{ - u16 reg; - u16 devadr; - - if (miiphy_set_current_dev(name)) - return; - - /* command to read PHY dev address */ - if (miiphy_read(name, 0xEE, 0xEE, (u16 *) &devadr)) { - printf("Err..%s could not read PHY dev address\n", - __func__); - return; - } - - /* - * Enable RGMII delay on Tx and Rx for CPU port - * Ref: sec 4.7.2 of chip datasheet - */ - miiphy_write(name, devadr, MV88E1116_PGADR_REG, 2); - miiphy_read(name, devadr, MV88E1116_MAC_CTRL2_REG, ®); - reg |= (MV88E1116_RGMII_RXTM_CTRL | MV88E1116_RGMII_TXTM_CTRL); - miiphy_write(name, devadr, MV88E1116_MAC_CTRL2_REG, reg); - miiphy_write(name, devadr, MV88E1116_PGADR_REG, 0); - - /* reset the phy */ - miiphy_reset(name, devadr); - - printf("88E1118 Initialized on %s\n", name); -} - -/* Configure and enable Switch and PHY */ -void reset_phy(void) -{ - /* configure and initialize PHY */ - mv_phy_88e1118_init("egiga0"); - -} -#endif diff --git a/configs/tk71_defconfig b/configs/tk71_defconfig deleted file mode 100644 index 5e2a0b8..0000000 --- a/configs/tk71_defconfig +++ /dev/null @@ -1,6 +0,0 @@ -CONFIG_ARM=y -CONFIG_KIRKWOOD=y -CONFIG_TARGET_TK71=y -# CONFIG_CMD_IMLS is not set -# CONFIG_CMD_FLASH is not set -# CONFIG_CMD_SETEXPR is not set diff --git a/include/configs/tk71.h b/include/configs/tk71.h deleted file mode 100644 index 46e8c90..0000000 --- a/include/configs/tk71.h +++ /dev/null @@ -1,112 +0,0 @@ -/* - * Copyright (C) 2012 Marek Vasut <marex@denx.de> - * on behalf of DENX Software Engineering GmbH - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __CONFIG_TK71_H__ -#define __CONFIG_TK71_H__ - -/* - * Version number information - */ -#define CONFIG_IDENT_STRING "\nKa-Ro TK71" - -/* - * High Level Configuration Options (easy to change) - */ -#define CONFIG_FEROCEON_88FR131 1 /* CPU Core subversion */ -#define CONFIG_KW88F6281 1 /* SOC Name */ -#define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */ -#define CONFIG_NR_DRAM_BANKS 1 - -#define MACH_TYPE_TK71 2399 -#define CONFIG_MACH_TYPE MACH_TYPE_TK71 - -/* - * Commands configuration - */ -#define CONFIG_SYS_HUSH_PARSER - -#define CONFIG_SYS_NO_FLASH -#define CONFIG_DOS_PARTITION -#define CONFIG_SUPPORT_VFAT - -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_ENV -#define CONFIG_CMD_EXT2 -#define CONFIG_CMD_FAT -#define CONFIG_CMD_MTDPARTS -#define CONFIG_CMD_NAND -#define CONFIG_CMD_PING -#define CONFIG_CMD_USB - -/* - * mv-common.h should be defined after CMD configs since it used them - * to enable certain macros - */ -#include "mv-common.h" - -/* - * NAND flash - */ -#ifdef CONFIG_CMD_NAND -#define CONFIG_MTD_DEVICE -#define CONFIG_MTD_PARTITIONS -#define CONFIG_JFFS2_NAND -#define CONFIG_JFFS2_DEV "nand0,3" -#endif - -/* - * Ethernet Driver configuration - */ -#ifdef CONFIG_CMD_NET -#define CONFIG_MVGBE_PORTS {1, 0} -#define CONFIG_PHY_BASE_ADR 0x08 -#endif - -/* - * USB/EHCI - */ -#ifdef CONFIG_CMD_USB -#define CONFIG_USB_EHCI -#define CONFIG_USB_EHCI_KIRKWOOD -#define CONFIG_EHCI_IS_TDI -#define CONFIG_USB_STORAGE -#endif - -/* - * Environment variables configurations - */ -#ifdef CONFIG_CMD_NAND -#define CONFIG_ENV_IS_IN_NAND -#define CONFIG_ENV_SECT_SIZE 0x20000 -#else -#define CONFIG_ENV_IS_NOWHERE -#endif - -#define CONFIG_ENV_SIZE 0x20000 -#define CONFIG_ENV_ADDR 0x80000 -#define CONFIG_ENV_OFFSET 0x80000 - -/* - * Default environment variables - */ -#define CONFIG_BOOTCOMMAND "nand read 0x800000 kernel 0x300000; bootm;" -#define CONFIG_MTDPARTS "512K(u-boot),512K(u-boot-env),3M(kernel),-(root)" -#define CONFIG_EXTRA_ENV_SETTINGS \ - "update_uboot=dhcp u-boot.kwb; nand erase.part u-boot; nand write ${fileaddr} u-boot ${filesize}\0" \ - "update_kernel=dhcp uImage-tk71; nand erase.part kernel; nand write ${fileaddr} kernel ${filesize} \0" \ - "update_rootfs=dhcp rootfs-tk71; nand erase.part root; nand write ${fileaddr} root ${filesize}\0" \ - "update_all=run update_uboot; run update_kernel; run update_rootfs; reset\0" \ - "mtdids=nand0=orion_nand\0" \ - "mtdparts=mtdparts=orion_nand:"CONFIG_MTDPARTS"\0" \ - "bootargs=console=ttyS0,115200 mtdparts=orion_nand:"CONFIG_MTDPARTS" rootfstype=jffs2 root=/dev/mtdblock3 rw\0" -#define MTDIDS_DEFAULT "nand0=orion_nand" -#define MTDPARTS_DEFAULT "mtdparts=orion_nand:"CONFIG_MTDPARTS - -#define PHYS_SDRAM_1 0x00000000 /* Base address */ -#define PHYS_SDRAM_1_SIZE 0x20000000 /* Max 512 MB RAM */ - -#endif /* __CONFIG_TK71_H__ */ |