summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorPaul Gortmaker <paul.gortmaker@windriver.com>2009-09-25 11:14:11 -0400
committerKumar Gala <galak@kernel.crashing.org>2009-09-30 08:29:47 -0500
commitdd9ca98f2600000e5c2744735040100b770650e7 (patch)
tree0eeacea3bc8b43a5025fbadeb808166a0c94962d
parent8280912e0657e96a7b7d8da7003656d62b0fd109 (diff)
downloadu-boot-imx-dd9ca98f2600000e5c2744735040100b770650e7.zip
u-boot-imx-dd9ca98f2600000e5c2744735040100b770650e7.tar.gz
u-boot-imx-dd9ca98f2600000e5c2744735040100b770650e7.tar.bz2
sbc8548: reclaim wasted sector in boot flash
By nature of being based off the MPC8548CDS board, this board inherited an ENV_SIZE setting of 256k. But since it has a smaller flash device (8MB soldered on), it has a native sector size of 128k, and hence the ENV_SIZE was causing 2 sectors to be used for the environment. By removing the unused sector, we can push TEXT_BASE up closer to the end of address space and reclaim that sector for any other application. This also fixes the mismatch between TEXT_BASE and MONITOR_LEN reported by Kumar earlier. Since this board also supports the ability to boot off the 64MB SODIMM flash, this change is forward looking with that in mind; i.e. the settings for MONITOR_LEN and ENV_SIZE will work when the 512k sectors of the SODIMM flash are used for alternate boot in the future. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
-rw-r--r--board/sbc8548/config.mk2
-rw-r--r--doc/README.sbc854824
-rw-r--r--include/configs/sbc8548.h20
3 files changed, 42 insertions, 4 deletions
diff --git a/board/sbc8548/config.mk b/board/sbc8548/config.mk
index 440d650..b2013d6 100644
--- a/board/sbc8548/config.mk
+++ b/board/sbc8548/config.mk
@@ -24,5 +24,5 @@
# sbc8548 board
#
ifndef TEXT_BASE
-TEXT_BASE = 0xfff80000
+TEXT_BASE = 0xfffa0000
endif
diff --git a/doc/README.sbc8548 b/doc/README.sbc8548
index d72d97d..6cbe12f 100644
--- a/doc/README.sbc8548
+++ b/doc/README.sbc8548
@@ -63,6 +63,30 @@ a 33MHz PCI configuration is currently untested.)
=>
+Updating U-boot with U-boot:
+============================
+
+Note that versions of u-boot up to and including 2009.08 had u-boot stored
+at 0xfff8_0000 -> 0xffff_ffff (512k). Currently it is being stored from
+0xfffa_0000 -> 0xffff_ffff (384k). If you use an old macro/script to
+update u-boot with u-boot and it uses the old address, you will render
+your board inoperable, and you will require JTAG recovery.
+
+The following steps list how to update with the current address:
+
+ tftp u-boot.bin
+ md 200000 10
+ protect off all
+ erase fffa0000 ffffffff
+ cp.b 200000 fffa0000 60000
+ md fffa0000 10
+ protect on all
+
+The "md" steps in the above are just a precautionary step that allow
+you to confirm the u-boot version that was downloaded, and then confirm
+that it was copied to flash.
+
+
Hardware Reference:
===================
diff --git a/include/configs/sbc8548.h b/include/configs/sbc8548.h
index d10792a..aeac2de 100644
--- a/include/configs/sbc8548.h
+++ b/include/configs/sbc8548.h
@@ -330,7 +330,14 @@
#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
-#define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */
+/*
+ * For soldered on flash, (128kB/sector) we use 2 sectors for u-boot and
+ * one for env+bootpg (TEXT_BASE=0xfffa_0000, 384kB total). For SODIMM
+ * flash (512kB/sector) we use 1 sector for u-boot, and one for env+bootpg
+ * (TEXT_BASE=0xfff0_0000, 1MB total). This dynamically sets the right
+ * thing for MONITOR_LEN in both cases.
+ */
+#define CONFIG_SYS_MONITOR_LEN (~TEXT_BASE + 1)
#define CONFIG_SYS_MALLOC_LEN (128 * 1024) /* Reserved for malloc */
/* Serial Port */
@@ -448,9 +455,16 @@
* Environment
*/
#define CONFIG_ENV_IS_IN_FLASH 1
-#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + 0x40000)
-#define CONFIG_ENV_SECT_SIZE 0x40000 /* 256K(one sector) for env */
#define CONFIG_ENV_SIZE 0x2000
+#if TEXT_BASE == 0xfff00000 /* Boot from 64MB SODIMM */
+#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + 0x80000)
+#define CONFIG_ENV_SECT_SIZE 0x80000 /* 512K(one sector) for env */
+#elif TEXT_BASE == 0xfffa0000 /* Boot from 8MB soldered flash */
+#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + 0x40000)
+#define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K(one sector) for env */
+#else
+#warning undefined environment size/location.
+#endif
#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */