summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorhaikun <haikun.wang@freescale.com>2015-03-24 21:16:31 +0800
committerSimon Glass <sjg@chromium.org>2015-04-18 11:11:17 -0600
commitce35fc17f00e3d02fbf5d2156e1ff114c9bcc1dc (patch)
tree635726cf3e86262f7ed6394487d24e31249945f1
parentddf79f3623ad3062f1653e6c075d21448ff3b2cb (diff)
downloadu-boot-imx-ce35fc17f00e3d02fbf5d2156e1ff114c9bcc1dc.zip
u-boot-imx-ce35fc17f00e3d02fbf5d2156e1ff114c9bcc1dc.tar.gz
u-boot-imx-ce35fc17f00e3d02fbf5d2156e1ff114c9bcc1dc.tar.bz2
dm: ls1021a: dts: Change address_cells and size_cells from 2 to 1
Change address_cells and size_cells of root node and 'soc' node from 2 to 1. We backport ls1021a device tree source files from kernel to u-boot. Kernel files set address_cells and size_cells to 2 in order to access more than 4GB space. But we don't have this requirement now and u-boot fdtdec_get_xxx interfaces can't support property whose size is 'u64' completely. So make this change. Signed-off-by: Haikun Wang <Haikun.Wang@freescale.com> Acked-by: Simon Glass <sjg@chromium.org>
-rw-r--r--arch/arm/dts/ls1021a-qds.dts6
-rw-r--r--arch/arm/dts/ls1021a-twr.dts2
-rw-r--r--arch/arm/dts/ls1021a.dtsi72
3 files changed, 40 insertions, 40 deletions
diff --git a/arch/arm/dts/ls1021a-qds.dts b/arch/arm/dts/ls1021a-qds.dts
index c89f85e..7454ac6 100644
--- a/arch/arm/dts/ls1021a-qds.dts
+++ b/arch/arm/dts/ls1021a-qds.dts
@@ -101,9 +101,9 @@
#address-cells = <2>;
#size-cells = <1>;
/* NOR, NAND Flashes and FPGA on board */
- ranges = <0x0 0x0 0x0 0x60000000 0x08000000
- 0x2 0x0 0x0 0x7e800000 0x00010000
- 0x3 0x0 0x0 0x7fb00000 0x00000100>;
+ ranges = <0x0 0x0 0x60000000 0x08000000
+ 0x2 0x0 0x7e800000 0x00010000
+ 0x3 0x0 0x7fb00000 0x00000100>;
status = "okay";
nor@0,0 {
diff --git a/arch/arm/dts/ls1021a-twr.dts b/arch/arm/dts/ls1021a-twr.dts
index 34ac82d..2f0481d 100644
--- a/arch/arm/dts/ls1021a-twr.dts
+++ b/arch/arm/dts/ls1021a-twr.dts
@@ -46,7 +46,7 @@
#address-cells = <2>;
#size-cells = <1>;
/* NOR Flash on board */
- ranges = <0x0 0x0 0x0 0x60000000 0x08000000>;
+ ranges = <0x0 0x0 0x60000000 0x08000000>;
status = "okay";
nor@0,0 {
diff --git a/arch/arm/dts/ls1021a.dtsi b/arch/arm/dts/ls1021a.dtsi
index 434b938..064d10c 100644
--- a/arch/arm/dts/ls1021a.dtsi
+++ b/arch/arm/dts/ls1021a.dtsi
@@ -6,7 +6,7 @@
* SPDX-License-Identifier: GPL-2.0+
*/
-#include "skeleton64.dtsi"
+#include "skeleton.dtsi"
#include <dt-bindings/interrupt-controller/arm-gic.h>
/ {
@@ -58,8 +58,8 @@
soc {
compatible = "simple-bus";
- #address-cells = <2>;
- #size-cells = <2>;
+ #address-cells = <1>;
+ #size-cells = <1>;
device_type = "soc";
interrupt-parent = <&gic>;
ranges;
@@ -68,29 +68,29 @@
compatible = "arm,cortex-a7-gic";
#interrupt-cells = <3>;
interrupt-controller;
- reg = <0x0 0x1401000 0x0 0x1000>,
- <0x0 0x1402000 0x0 0x1000>,
- <0x0 0x1404000 0x0 0x2000>,
- <0x0 0x1406000 0x0 0x2000>;
+ reg = <0x1401000 0x1000>,
+ <0x1402000 0x1000>,
+ <0x1404000 0x2000>,
+ <0x1406000 0x2000>;
interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
};
ifc: ifc@1530000 {
compatible = "fsl,ifc", "simple-bus";
- reg = <0x0 0x1530000 0x0 0x10000>;
+ reg = <0x1530000 0x10000>;
interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
};
dcfg: dcfg@1ee0000 {
compatible = "fsl,ls1021a-dcfg", "syscon";
- reg = <0x0 0x1ee0000 0x0 0x10000>;
+ reg = <0x1ee0000 0x10000>;
big-endian;
};
esdhc: esdhc@1560000 {
compatible = "fsl,esdhc";
- reg = <0x0 0x1560000 0x0 0x10000>;
+ reg = <0x1560000 0x10000>;
interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <0>;
voltage-ranges = <1800 1800 3300 3300>;
@@ -102,14 +102,14 @@
scfg: scfg@1570000 {
compatible = "fsl,ls1021a-scfg", "syscon";
- reg = <0x0 0x1570000 0x0 0x10000>;
+ reg = <0x1570000 0x10000>;
big-endian;
};
clockgen: clocking@1ee1000 {
#address-cells = <1>;
#size-cells = <1>;
- ranges = <0x0 0x0 0x1ee1000 0x10000>;
+ ranges = <0x0 0x1ee1000 0x10000>;
sysclk: sysclk {
compatible = "fixed-clock";
@@ -148,7 +148,7 @@
compatible = "fsl,vf610-dspi";
#address-cells = <1>;
#size-cells = <0>;
- reg = <0x0 0x2100000 0x0 0x10000>;
+ reg = <0x2100000 0x10000>;
interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "dspi";
clocks = <&platform_clk 1>;
@@ -161,7 +161,7 @@
compatible = "fsl,vf610-dspi";
#address-cells = <1>;
#size-cells = <0>;
- reg = <0x0 0x2110000 0x0 0x10000>;
+ reg = <0x2110000 0x10000>;
interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "dspi";
clocks = <&platform_clk 1>;
@@ -174,7 +174,7 @@
compatible = "fsl,vf610-i2c";
#address-cells = <1>;
#size-cells = <0>;
- reg = <0x0 0x2180000 0x0 0x10000>;
+ reg = <0x2180000 0x10000>;
interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "i2c";
clocks = <&platform_clk 1>;
@@ -185,7 +185,7 @@
compatible = "fsl,vf610-i2c";
#address-cells = <1>;
#size-cells = <0>;
- reg = <0x0 0x2190000 0x0 0x10000>;
+ reg = <0x2190000 0x10000>;
interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "i2c";
clocks = <&platform_clk 1>;
@@ -196,7 +196,7 @@
compatible = "fsl,vf610-i2c";
#address-cells = <1>;
#size-cells = <0>;
- reg = <0x0 0x21a0000 0x0 0x10000>;
+ reg = <0x21a0000 0x10000>;
interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "i2c";
clocks = <&platform_clk 1>;
@@ -205,7 +205,7 @@
uart0: serial@21c0500 {
compatible = "fsl,16550-FIFO64", "ns16550a";
- reg = <0x0 0x21c0500 0x0 0x100>;
+ reg = <0x21c0500 0x100>;
interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <0>;
fifo-size = <15>;
@@ -214,7 +214,7 @@
uart1: serial@21c0600 {
compatible = "fsl,16550-FIFO64", "ns16550a";
- reg = <0x0 0x21c0600 0x0 0x100>;
+ reg = <0x21c0600 0x100>;
interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <0>;
fifo-size = <15>;
@@ -223,7 +223,7 @@
uart2: serial@21d0500 {
compatible = "fsl,16550-FIFO64", "ns16550a";
- reg = <0x0 0x21d0500 0x0 0x100>;
+ reg = <0x21d0500 0x100>;
interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <0>;
fifo-size = <15>;
@@ -232,7 +232,7 @@
uart3: serial@21d0600 {
compatible = "fsl,16550-FIFO64", "ns16550a";
- reg = <0x0 0x21d0600 0x0 0x100>;
+ reg = <0x21d0600 0x100>;
interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <0>;
fifo-size = <15>;
@@ -241,7 +241,7 @@
lpuart0: serial@2950000 {
compatible = "fsl,ls1021a-lpuart";
- reg = <0x0 0x2950000 0x0 0x1000>;
+ reg = <0x2950000 0x1000>;
interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&sysclk>;
clock-names = "ipg";
@@ -250,7 +250,7 @@
lpuart1: serial@2960000 {
compatible = "fsl,ls1021a-lpuart";
- reg = <0x0 0x2960000 0x0 0x1000>;
+ reg = <0x2960000 0x1000>;
interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&platform_clk 1>;
clock-names = "ipg";
@@ -259,7 +259,7 @@
lpuart2: serial@2970000 {
compatible = "fsl,ls1021a-lpuart";
- reg = <0x0 0x2970000 0x0 0x1000>;
+ reg = <0x2970000 0x1000>;
interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&platform_clk 1>;
clock-names = "ipg";
@@ -268,7 +268,7 @@
lpuart3: serial@2980000 {
compatible = "fsl,ls1021a-lpuart";
- reg = <0x0 0x2980000 0x0 0x1000>;
+ reg = <0x2980000 0x1000>;
interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&platform_clk 1>;
clock-names = "ipg";
@@ -277,7 +277,7 @@
lpuart4: serial@2990000 {
compatible = "fsl,ls1021a-lpuart";
- reg = <0x0 0x2990000 0x0 0x1000>;
+ reg = <0x2990000 0x1000>;
interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&platform_clk 1>;
clock-names = "ipg";
@@ -286,7 +286,7 @@
lpuart5: serial@29a0000 {
compatible = "fsl,ls1021a-lpuart";
- reg = <0x0 0x29a0000 0x0 0x1000>;
+ reg = <0x29a0000 0x1000>;
interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&platform_clk 1>;
clock-names = "ipg";
@@ -295,7 +295,7 @@
wdog0: watchdog@2ad0000 {
compatible = "fsl,imx21-wdt";
- reg = <0x0 0x2ad0000 0x0 0x10000>;
+ reg = <0x2ad0000 0x10000>;
interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&platform_clk 1>;
clock-names = "wdog-en";
@@ -304,7 +304,7 @@
sai1: sai@2b50000 {
compatible = "fsl,vf610-sai";
- reg = <0x0 0x2b50000 0x0 0x10000>;
+ reg = <0x2b50000 0x10000>;
interrupts = <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&platform_clk 1>;
clock-names = "sai";
@@ -317,7 +317,7 @@
sai2: sai@2b60000 {
compatible = "fsl,vf610-sai";
- reg = <0x0 0x2b60000 0x0 0x10000>;
+ reg = <0x2b60000 0x10000>;
interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&platform_clk 1>;
clock-names = "sai";
@@ -331,9 +331,9 @@
edma0: edma@2c00000 {
#dma-cells = <2>;
compatible = "fsl,vf610-edma";
- reg = <0x0 0x2c00000 0x0 0x10000>,
- <0x0 0x2c10000 0x0 0x10000>,
- <0x0 0x2c20000 0x0 0x10000>;
+ reg = <0x2c00000 0x10000>,
+ <0x2c10000 0x10000>,
+ <0x2c20000 0x10000>;
interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "edma-tx", "edma-err";
@@ -349,12 +349,12 @@
device_type = "mdio";
#address-cells = <1>;
#size-cells = <0>;
- reg = <0x0 0x2d24000 0x0 0x4000>;
+ reg = <0x2d24000 0x4000>;
};
usb@8600000 {
compatible = "fsl-usb2-dr-v2.5", "fsl-usb2-dr";
- reg = <0x0 0x8600000 0x0 0x1000>;
+ reg = <0x8600000 0x1000>;
interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>;
dr_mode = "host";
phy_type = "ulpi";
@@ -362,7 +362,7 @@
usb3@3100000 {
compatible = "snps,dwc3";
- reg = <0x0 0x3100000 0x0 0x10000>;
+ reg = <0x3100000 0x10000>;
interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
dr_mode = "host";
};