summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorAlbert ARIBAUD <albert.u.boot@aribaud.net>2014-06-02 08:43:48 +0200
committerAlbert ARIBAUD <albert.u.boot@aribaud.net>2014-06-02 08:43:48 +0200
commitcc49da249cf2f380d2fed5571fad65ce6494fc95 (patch)
tree00bf437b6a370c0640d5fafd93780406d3531ebb
parent9637a1bb896efe392a58dd2772e2c3fcb646409d (diff)
parent567802bbd6bf1c809d37fef9244fc8a692244e73 (diff)
downloadu-boot-imx-cc49da249cf2f380d2fed5571fad65ce6494fc95.zip
u-boot-imx-cc49da249cf2f380d2fed5571fad65ce6494fc95.tar.gz
u-boot-imx-cc49da249cf2f380d2fed5571fad65ce6494fc95.tar.bz2
Merge branch 'u-boot-samsung/master' into 'u-boot-arm/master'
-rw-r--r--arch/arm/cpu/armv7/exynos/clock.c45
-rw-r--r--arch/arm/cpu/armv7/exynos/lowlevel_init.c8
-rw-r--r--arch/arm/cpu/armv7/exynos/pinmux.c35
-rw-r--r--arch/arm/cpu/armv7/exynos/power.c6
-rw-r--r--arch/arm/dts/exynos4.dtsi8
-rw-r--r--arch/arm/dts/exynos4412-trats2.dts12
-rw-r--r--arch/arm/dts/exynos5.dtsi8
-rw-r--r--arch/arm/dts/exynos5250-snow.dts61
-rw-r--r--arch/arm/include/asm/arch-exynos/clk.h5
-rw-r--r--arch/arm/include/asm/arch-exynos/power.h1
-rw-r--r--board/samsung/common/board.c13
-rw-r--r--board/samsung/goni/goni.c8
-rw-r--r--board/samsung/smdk5250/Makefile4
-rw-r--r--board/samsung/smdk5250/exynos5-dt.c238
-rw-r--r--board/samsung/smdk5250/smdk5250.c363
-rw-r--r--board/samsung/smdk5420/smdk5420.c3
-rw-r--r--doc/device-tree-bindings/exynos/dwmmc.txt8
-rw-r--r--doc/device-tree-bindings/power/tps65090.txt17
-rw-r--r--doc/device-tree-bindings/regulator/tps65090.txt122
-rw-r--r--drivers/mmc/dw_mmc.c12
-rw-r--r--drivers/mmc/exynos_dw_mmc.c205
-rw-r--r--drivers/mmc/mmc.c16
-rw-r--r--drivers/mmc/s5p_sdhci.c42
-rw-r--r--drivers/power/battery/bat_trats.c4
-rw-r--r--drivers/power/battery/bat_trats2.c2
-rw-r--r--drivers/power/mfd/pmic_max77693.c2
-rw-r--r--drivers/power/pmic/Makefile1
-rw-r--r--drivers/power/pmic/pmic_max8997.c2
-rw-r--r--drivers/power/pmic/pmic_tps65090.c310
-rw-r--r--drivers/power/power_fsl.c6
-rw-r--r--drivers/power/power_i2c.c4
-rw-r--r--include/configs/arndale.h4
-rw-r--r--include/configs/exynos4-dt.h4
-rw-r--r--include/configs/exynos5-dt.h1
-rw-r--r--include/configs/exynos5250-dt.h2
-rw-r--r--include/configs/mx25pdk.h2
-rw-r--r--include/configs/mx35pdk.h2
-rw-r--r--include/configs/mx53evk.h2
-rw-r--r--include/configs/mx53loco.h2
-rw-r--r--include/configs/s5p_goni.h113
-rw-r--r--include/configs/woodburn_common.h2
-rw-r--r--include/dwmmc.h5
-rw-r--r--include/fdtdec.h4
-rw-r--r--include/initcall.h2
-rw-r--r--include/mmc.h25
-rw-r--r--include/power/max77693_pmic.h2
-rw-r--r--include/power/max8997_pmic.h1
-rw-r--r--include/power/pmic.h5
-rw-r--r--include/power/tps65090_pmic.h73
-rw-r--r--lib/fdtdec.c4
-rw-r--r--lib/initcall.c17
51 files changed, 1238 insertions, 605 deletions
diff --git a/arch/arm/cpu/armv7/exynos/clock.c b/arch/arm/cpu/armv7/exynos/clock.c
index 1fea4d6..400d134 100644
--- a/arch/arm/cpu/armv7/exynos/clock.c
+++ b/arch/arm/cpu/armv7/exynos/clock.c
@@ -869,7 +869,7 @@ static void exynos4_set_mmc_clk(int dev_index, unsigned int div)
{
struct exynos4_clock *clk =
(struct exynos4_clock *)samsung_get_base_clock();
- unsigned int addr;
+ unsigned int addr, clear_bit, set_bit;
/*
* CLK_DIV_FSYS1
@@ -877,44 +877,26 @@ static void exynos4_set_mmc_clk(int dev_index, unsigned int div)
* CLK_DIV_FSYS2
* MMC2_PRE_RATIO [15:8], MMC3_PRE_RATIO [31:24]
* CLK_DIV_FSYS3
- * MMC4_PRE_RATIO [15:8]
+ * MMC4_RATIO [3:0]
*/
if (dev_index < 2) {
addr = (unsigned int)&clk->div_fsys1;
- } else if (dev_index == 4) {
+ clear_bit = MASK_PRE_RATIO(dev_index);
+ set_bit = SET_PRE_RATIO(dev_index, div);
+ } else if (dev_index == 4) {
addr = (unsigned int)&clk->div_fsys3;
dev_index -= 4;
+ /* MMC4 is controlled with the MMC4_RATIO value */
+ clear_bit = MASK_RATIO(dev_index);
+ set_bit = SET_RATIO(dev_index, div);
} else {
addr = (unsigned int)&clk->div_fsys2;
dev_index -= 2;
+ clear_bit = MASK_PRE_RATIO(dev_index);
+ set_bit = SET_PRE_RATIO(dev_index, div);
}
- clrsetbits_le32(addr, 0xff << ((dev_index << 4) + 8),
- (div & 0xff) << ((dev_index << 4) + 8));
-}
-
-/* exynos4x12: set the mmc clock */
-static void exynos4x12_set_mmc_clk(int dev_index, unsigned int div)
-{
- struct exynos4x12_clock *clk =
- (struct exynos4x12_clock *)samsung_get_base_clock();
- unsigned int addr;
-
- /*
- * CLK_DIV_FSYS1
- * MMC0_PRE_RATIO [15:8], MMC1_PRE_RATIO [31:24]
- * CLK_DIV_FSYS2
- * MMC2_PRE_RATIO [15:8], MMC3_PRE_RATIO [31:24]
- */
- if (dev_index < 2) {
- addr = (unsigned int)&clk->div_fsys1;
- } else {
- addr = (unsigned int)&clk->div_fsys2;
- dev_index -= 2;
- }
-
- clrsetbits_le32(addr, 0xff << ((dev_index << 4) + 8),
- (div & 0xff) << ((dev_index << 4) + 8));
+ clrsetbits_le32(addr, clear_bit, set_bit);
}
/* exynos5: set the mmc clock */
@@ -1612,10 +1594,7 @@ void set_mmc_clk(int dev_index, unsigned int div)
else
exynos5_set_mmc_clk(dev_index, div);
} else {
- if (proid_is_exynos4412())
- exynos4x12_set_mmc_clk(dev_index, div);
- else
- exynos4_set_mmc_clk(dev_index, div);
+ exynos4_set_mmc_clk(dev_index, div);
}
}
diff --git a/arch/arm/cpu/armv7/exynos/lowlevel_init.c b/arch/arm/cpu/armv7/exynos/lowlevel_init.c
index 11fe5b8..dcc270f 100644
--- a/arch/arm/cpu/armv7/exynos/lowlevel_init.c
+++ b/arch/arm/cpu/armv7/exynos/lowlevel_init.c
@@ -39,6 +39,7 @@ enum {
DO_CLOCKS = 1 << 1,
DO_MEM_RESET = 1 << 2,
DO_UART = 1 << 3,
+ DO_POWER = 1 << 4,
};
int do_lowlevel_init(void)
@@ -48,6 +49,8 @@ int do_lowlevel_init(void)
arch_cpu_init();
+ set_ps_hold_ctrl();
+
reset_status = get_reset_status();
switch (reset_status) {
@@ -60,9 +63,12 @@ int do_lowlevel_init(void)
break;
default:
/* This is a normal boot (not a wake from sleep) */
- actions = DO_CLOCKS | DO_MEM_RESET;
+ actions = DO_CLOCKS | DO_MEM_RESET | DO_POWER;
}
+ if (actions & DO_POWER)
+ set_ps_hold_ctrl();
+
if (actions & DO_CLOCKS) {
system_clock_init();
mem_ctrl_init(actions & DO_MEM_RESET);
diff --git a/arch/arm/cpu/armv7/exynos/pinmux.c b/arch/arm/cpu/armv7/exynos/pinmux.c
index ee7c2e5..86a0c75 100644
--- a/arch/arm/cpu/armv7/exynos/pinmux.c
+++ b/arch/arm/cpu/armv7/exynos/pinmux.c
@@ -573,15 +573,26 @@ static void exynos4_i2c_config(int peripheral, int flags)
static int exynos4_mmc_config(int peripheral, int flags)
{
int i, start = 0, start_ext = 0;
+ unsigned int func, ext_func;
switch (peripheral) {
case PERIPH_ID_SDMMC0:
start = EXYNOS4_GPIO_K00;
start_ext = EXYNOS4_GPIO_K13;
+ func = S5P_GPIO_FUNC(0x2);
+ ext_func = S5P_GPIO_FUNC(0x3);
break;
case PERIPH_ID_SDMMC2:
start = EXYNOS4_GPIO_K20;
start_ext = EXYNOS4_GPIO_K33;
+ func = S5P_GPIO_FUNC(0x2);
+ ext_func = S5P_GPIO_FUNC(0x3);
+ break;
+ case PERIPH_ID_SDMMC4:
+ start = EXYNOS4_GPIO_K00;
+ start_ext = EXYNOS4_GPIO_K13;
+ func = S5P_GPIO_FUNC(0x3);
+ ext_func = S5P_GPIO_FUNC(0x4);
break;
default:
return -1;
@@ -589,13 +600,14 @@ static int exynos4_mmc_config(int peripheral, int flags)
for (i = start; i < (start + 7); i++) {
if (i == (start + 2))
continue;
- gpio_cfg_pin(i, S5P_GPIO_FUNC(0x2));
+ gpio_cfg_pin(i, func);
gpio_set_pull(i, S5P_GPIO_PULL_NONE);
gpio_set_drv(i, S5P_GPIO_DRV_4X);
}
+ /* SDMMC2 do not use 8bit mode at exynos4 */
if (flags & PINMUX_FLAG_8BIT_MODE) {
for (i = start_ext; i < (start_ext + 4); i++) {
- gpio_cfg_pin(i, S5P_GPIO_FUNC(0x3));
+ gpio_cfg_pin(i, ext_func);
gpio_set_pull(i, S5P_GPIO_PULL_NONE);
gpio_set_drv(i, S5P_GPIO_DRV_4X);
}
@@ -676,15 +688,26 @@ static void exynos4x12_i2c_config(int peripheral, int flags)
static int exynos4x12_mmc_config(int peripheral, int flags)
{
int i, start = 0, start_ext = 0;
+ unsigned int func, ext_func;
switch (peripheral) {
case PERIPH_ID_SDMMC0:
start = EXYNOS4X12_GPIO_K00;
start_ext = EXYNOS4X12_GPIO_K13;
+ func = S5P_GPIO_FUNC(0x2);
+ ext_func = S5P_GPIO_FUNC(0x3);
break;
case PERIPH_ID_SDMMC2:
start = EXYNOS4X12_GPIO_K20;
start_ext = EXYNOS4X12_GPIO_K33;
+ func = S5P_GPIO_FUNC(0x2);
+ ext_func = S5P_GPIO_FUNC(0x3);
+ break;
+ case PERIPH_ID_SDMMC4:
+ start = EXYNOS4_GPIO_K00;
+ start_ext = EXYNOS4_GPIO_K13;
+ func = S5P_GPIO_FUNC(0x3);
+ ext_func = S5P_GPIO_FUNC(0x4);
break;
default:
return -1;
@@ -692,13 +715,13 @@ static int exynos4x12_mmc_config(int peripheral, int flags)
for (i = start; i < (start + 7); i++) {
if (i == (start + 2))
continue;
- gpio_cfg_pin(i, S5P_GPIO_FUNC(0x2));
+ gpio_cfg_pin(i, func);
gpio_set_pull(i, S5P_GPIO_PULL_NONE);
gpio_set_drv(i, S5P_GPIO_DRV_4X);
}
if (flags & PINMUX_FLAG_8BIT_MODE) {
for (i = start_ext; i < (start_ext + 4); i++) {
- gpio_cfg_pin(i, S5P_GPIO_FUNC(0x3));
+ gpio_cfg_pin(i, ext_func);
gpio_set_pull(i, S5P_GPIO_PULL_NONE);
gpio_set_drv(i, S5P_GPIO_DRV_4X);
}
@@ -759,10 +782,10 @@ static int exynos4_pinmux_config(int peripheral, int flags)
break;
case PERIPH_ID_SDMMC0:
case PERIPH_ID_SDMMC2:
+ case PERIPH_ID_SDMMC4:
return exynos4_mmc_config(peripheral, flags);
case PERIPH_ID_SDMMC1:
case PERIPH_ID_SDMMC3:
- case PERIPH_ID_SDMMC4:
debug("SDMMC device %d not implemented\n", peripheral);
return -1;
default:
@@ -794,10 +817,10 @@ static int exynos4x12_pinmux_config(int peripheral, int flags)
break;
case PERIPH_ID_SDMMC0:
case PERIPH_ID_SDMMC2:
+ case PERIPH_ID_SDMMC4:
return exynos4x12_mmc_config(peripheral, flags);
case PERIPH_ID_SDMMC1:
case PERIPH_ID_SDMMC3:
- case PERIPH_ID_SDMMC4:
debug("SDMMC device %d not implemented\n", peripheral);
return -1;
default:
diff --git a/arch/arm/cpu/armv7/exynos/power.c b/arch/arm/cpu/armv7/exynos/power.c
index 563abd7..638ee0b 100644
--- a/arch/arm/cpu/armv7/exynos/power.c
+++ b/arch/arm/cpu/armv7/exynos/power.c
@@ -112,6 +112,12 @@ static void exynos5_set_ps_hold_ctrl(void)
EXYNOS_PS_HOLD_CONTROL_DATA_HIGH);
}
+/*
+ * Set ps_hold data driving value high
+ * This enables the machine to stay powered on
+ * after the initial power-on condition goes away
+ * (e.g. power button).
+ */
void set_ps_hold_ctrl(void)
{
if (cpu_is_exynos5())
diff --git a/arch/arm/dts/exynos4.dtsi b/arch/arm/dts/exynos4.dtsi
index 71dc7eb..110eb43 100644
--- a/arch/arm/dts/exynos4.dtsi
+++ b/arch/arm/dts/exynos4.dtsi
@@ -128,6 +128,14 @@
interrupts = <0 78 0>;
};
+ dwmmc@12550000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "samsung,exynos-dwmmc";
+ reg = <0x12550000 0x1000>;
+ interrupts = <0 131 0>;
+ };
+
gpio: gpio {
gpio-controller;
#gpio-cells = <2>;
diff --git a/arch/arm/dts/exynos4412-trats2.dts b/arch/arm/dts/exynos4412-trats2.dts
index 1596f83..cc58c87 100644
--- a/arch/arm/dts/exynos4412-trats2.dts
+++ b/arch/arm/dts/exynos4412-trats2.dts
@@ -31,6 +31,7 @@
console = "/serial@13820000";
mmc0 = "sdhci@12510000";
mmc2 = "sdhci@12530000";
+ mmc4 = "dwmmc@12550000";
};
i2c@138d0000 {
@@ -416,6 +417,7 @@
samsung,bus-width = <8>;
samsung,timing = <1 3 3>;
pwr-gpios = <&gpio 0xB2 0>;
+ status = "disabled";
};
sdhci@12520000 {
@@ -431,4 +433,14 @@
sdhci@12540000 {
status = "disabled";
};
+
+ dwmmc@12550000 {
+ samsung,bus-width = <8>;
+ samsung,timing = <2 1 0>;
+ pwr-gpios = <&gpio 0xB2 0>;
+ fifoth_val = <0x203f0040>;
+ bus_hz = <400000000>;
+ div = <0x3>;
+ index = <4>;
+ };
};
diff --git a/arch/arm/dts/exynos5.dtsi b/arch/arm/dts/exynos5.dtsi
index f8c8741..a2b533a 100644
--- a/arch/arm/dts/exynos5.dtsi
+++ b/arch/arm/dts/exynos5.dtsi
@@ -136,7 +136,7 @@
mmc@12200000 {
#address-cells = <1>;
#size-cells = <0>;
- compatible = "samsung,exynos5250-dwmmc";
+ compatible = "samsung,exynos-dwmmc";
reg = <0x12200000 0x1000>;
interrupts = <0 75 0>;
};
@@ -144,7 +144,7 @@
mmc@12210000 {
#address-cells = <1>;
#size-cells = <0>;
- compatible = "samsung,exynos5250-dwmmc";
+ compatible = "samsung,exynos-dwmmc";
reg = <0x12210000 0x1000>;
interrupts = <0 76 0>;
};
@@ -152,7 +152,7 @@
mmc@12220000 {
#address-cells = <1>;
#size-cells = <0>;
- compatible = "samsung,exynos5250-dwmmc";
+ compatible = "samsung,exynos-dwmmc";
reg = <0x12220000 0x1000>;
interrupts = <0 77 0>;
};
@@ -160,7 +160,7 @@
mmc@12230000 {
#address-cells = <1>;
#size-cells = <0>;
- compatible = "samsung,exynos5250-dwmmc";
+ compatible = "samsung,exynos-dwmmc";
reg = <0x12230000 0x1000>;
interrupts = <0 78 0>;
};
diff --git a/arch/arm/dts/exynos5250-snow.dts b/arch/arm/dts/exynos5250-snow.dts
index 9b48a0c..ab4f2f8 100644
--- a/arch/arm/dts/exynos5250-snow.dts
+++ b/arch/arm/dts/exynos5250-snow.dts
@@ -44,7 +44,7 @@
reg = <0x1e>;
compatible = "google,cros-ec";
i2c-max-frequency = <100000>;
- ec-interrupt = <&gpio 782 1>;
+ ec-interrupt = <&gpio 182 1>;
};
power-regulator@48 {
@@ -60,7 +60,7 @@
reg = <0>;
compatible = "google,cros-ec";
spi-max-frequency = <5000000>;
- ec-interrupt = <&gpio 782 1>;
+ ec-interrupt = <&gpio 182 1>;
optimise-flash-write;
status = "disabled";
};
@@ -80,6 +80,19 @@
reg = <0x22>;
compatible = "maxim,max98095-codec";
};
+
+ ptn3460-bridge@20 {
+ compatible = "nxp,ptn3460";
+ reg = <0x20>;
+ /*
+ * TODO(sjg@chromium.org): Use GPIOs here
+ * powerdown-gpio = <&gpy2 5 0>;
+ * reset-gpio = <&gpx1 5 0>;
+ * edid-emulation = <5>;
+ * pinctrl-names = "default";
+ * pinctrl-0 = <&ptn3460_gpios>;
+ */
+ };
};
i2c@12c60000 {
@@ -184,4 +197,48 @@
/* UP LEFT */
0x070b0067 0x070c0069>;
};
+
+ fimd@14400000 {
+ samsung,vl-freq = <60>;
+ samsung,vl-col = <1366>;
+ samsung,vl-row = <768>;
+ samsung,vl-width = <1366>;
+ samsung,vl-height = <768>;
+
+ samsung,vl-clkp;
+ samsung,vl-dp;
+ samsung,vl-hsp;
+ samsung,vl-vsp;
+
+ samsung,vl-bpix = <4>;
+
+ samsung,vl-hspw = <32>;
+ samsung,vl-hbpd = <80>;
+ samsung,vl-hfpd = <48>;
+ samsung,vl-vspw = <5>;
+ samsung,vl-vbpd = <14>;
+ samsung,vl-vfpd = <3>;
+ samsung,vl-cmd-allow-len = <0xf>;
+
+ samsung,winid = <0>;
+ samsung,interface-mode = <1>;
+ samsung,dp-enabled = <1>;
+ samsung,dual-lcd-enabled = <0>;
+ };
+
+ dp@145b0000 {
+ samsung,lt-status = <0>;
+
+ samsung,master-mode = <0>;
+ samsung,bist-mode = <0>;
+ samsung,bist-pattern = <0>;
+ samsung,h-sync-polarity = <0>;
+ samsung,v-sync-polarity = <0>;
+ samsung,interlaced = <0>;
+ samsung,color-space = <0>;
+ samsung,dynamic-range = <0>;
+ samsung,ycbcr-coeff = <0>;
+ samsung,color-depth = <1>;
+ };
+
};
diff --git a/arch/arm/include/asm/arch-exynos/clk.h b/arch/arm/include/asm/arch-exynos/clk.h
index cdeef32..ffbc07e 100644
--- a/arch/arm/include/asm/arch-exynos/clk.h
+++ b/arch/arm/include/asm/arch-exynos/clk.h
@@ -16,6 +16,11 @@
#define BPLL 5
#define RPLL 6
+#define MASK_PRE_RATIO(x) (0xff << ((x << 4) + 8))
+#define MASK_RATIO(x) (0xf << (x << 4))
+#define SET_PRE_RATIO(x, y) ((y & 0xff) << ((x << 4) + 8))
+#define SET_RATIO(x, y) ((y & 0xf) << (x << 4))
+
enum pll_src_bit {
EXYNOS_SRC_MPLL = 6,
EXYNOS_SRC_EPLL,
diff --git a/arch/arm/include/asm/arch-exynos/power.h b/arch/arm/include/asm/arch-exynos/power.h
index c9609a2..a4b41ad 100644
--- a/arch/arm/include/asm/arch-exynos/power.h
+++ b/arch/arm/include/asm/arch-exynos/power.h
@@ -1726,4 +1726,5 @@ uint32_t get_reset_status(void);
/* Read the resume function and call it */
void power_exit_wakeup(void);
+
#endif
diff --git a/board/samsung/common/board.c b/board/samsung/common/board.c
index de154e0..9dc7c83 100644
--- a/board/samsung/common/board.c
+++ b/board/samsung/common/board.c
@@ -243,13 +243,6 @@ int board_eth_init(bd_t *bis)
int board_mmc_init(bd_t *bis)
{
int ret;
-
-#ifdef CONFIG_SDHCI
- /* mmc initializattion for available channels */
- ret = exynos_mmc_init(gd->fdt_blob);
- if (ret)
- debug("mmc init failed\n");
-#endif
#ifdef CONFIG_DWMMC
/* dwmmc initializattion for available channels */
ret = exynos_dwmmc_init(gd->fdt_blob);
@@ -257,6 +250,12 @@ int board_mmc_init(bd_t *bis)
debug("dwmmc init failed\n");
#endif
+#ifdef CONFIG_SDHCI
+ /* mmc initializattion for available channels */
+ ret = exynos_mmc_init(gd->fdt_blob);
+ if (ret)
+ debug("mmc init failed\n");
+#endif
return ret;
}
#endif
diff --git a/board/samsung/goni/goni.c b/board/samsung/goni/goni.c
index 4cea63b..eb0f9bf 100644
--- a/board/samsung/goni/goni.c
+++ b/board/samsung/goni/goni.c
@@ -14,6 +14,8 @@
#include <asm/arch/cpu.h>
#include <power/max8998_pmic.h>
#include <samsung/misc.h>
+#include <usb.h>
+#include <usb_mass_storage.h>
DECLARE_GLOBAL_DATA_PTR;
@@ -175,6 +177,12 @@ struct s3c_plat_otg_data s5pc110_otg_data = {
.regs_otg = S5PC110_OTG_BASE,
.usb_phy_ctrl = S5PC110_USB_PHY_CONTROL,
};
+
+int board_usb_init(int index, enum usb_init_type init)
+{
+ debug("USB_udc_probe\n");
+ return s3c_udc_probe(&s5pc110_otg_data);
+}
#endif
#ifdef CONFIG_MISC_INIT_R
diff --git a/board/samsung/smdk5250/Makefile b/board/samsung/smdk5250/Makefile
index 6a58655..3d96b07 100644
--- a/board/samsung/smdk5250/Makefile
+++ b/board/samsung/smdk5250/Makefile
@@ -7,9 +7,5 @@
obj-y += smdk5250_spl.o
ifndef CONFIG_SPL_BUILD
-ifdef CONFIG_OF_CONTROL
obj-y += exynos5-dt.o
-else
-obj-y += smdk5250.o
-endif
endif
diff --git a/board/samsung/smdk5250/exynos5-dt.c b/board/samsung/smdk5250/exynos5-dt.c
index 58821c4..d6ce133 100644
--- a/board/samsung/smdk5250/exynos5-dt.c
+++ b/board/samsung/smdk5250/exynos5-dt.c
@@ -11,15 +11,16 @@
#include <i2c.h>
#include <netdev.h>
#include <spi.h>
+#include <asm/gpio.h>
#include <asm/arch/cpu.h>
#include <asm/arch/dwmmc.h>
-#include <asm/arch/gpio.h>
#include <asm/arch/mmc.h>
#include <asm/arch/pinmux.h>
#include <asm/arch/power.h>
#include <asm/arch/sromc.h>
#include <power/pmic.h>
#include <power/max77686_pmic.h>
+#include <power/tps65090_pmic.h>
#include <tmu.h>
DECLARE_GLOBAL_DATA_PTR;
@@ -41,7 +42,197 @@ int exynos_init(void)
return 0;
}
+#if defined(CONFIG_POWER)
+#ifdef CONFIG_POWER_MAX77686
+static int pmic_reg_update(struct pmic *p, int reg, uint regval)
+{
+ u32 val;
+ int ret = 0;
+
+ ret = pmic_reg_read(p, reg, &val);
+ if (ret) {
+ debug("%s: PMIC %d register read failed\n", __func__, reg);
+ return -1;
+ }
+ val |= regval;
+ ret = pmic_reg_write(p, reg, val);
+ if (ret) {
+ debug("%s: PMIC %d register write failed\n", __func__, reg);
+ return -1;
+ }
+ return 0;
+}
+
+static int max77686_init(void)
+{
+ struct pmic *p;
+
+ if (pmic_init(I2C_PMIC))
+ return -1;
+
+ p = pmic_get("MAX77686_PMIC");
+ if (!p)
+ return -ENODEV;
+
+ if (pmic_probe(p))
+ return -1;
+
+ if (pmic_reg_update(p, MAX77686_REG_PMIC_32KHZ, MAX77686_32KHCP_EN))
+ return -1;
+
+ if (pmic_reg_update(p, MAX77686_REG_PMIC_BBAT,
+ MAX77686_BBCHOSTEN | MAX77686_BBCVS_3_5V))
+ return -1;
+
+ /* VDD_MIF */
+ if (pmic_reg_write(p, MAX77686_REG_PMIC_BUCK1OUT,
+ MAX77686_BUCK1OUT_1V)) {
+ debug("%s: PMIC %d register write failed\n", __func__,
+ MAX77686_REG_PMIC_BUCK1OUT);
+ return -1;
+ }
+
+ if (pmic_reg_update(p, MAX77686_REG_PMIC_BUCK1CRTL,
+ MAX77686_BUCK1CTRL_EN))
+ return -1;
+
+ /* VDD_ARM */
+ if (pmic_reg_write(p, MAX77686_REG_PMIC_BUCK2DVS1,
+ MAX77686_BUCK2DVS1_1_3V)) {
+ debug("%s: PMIC %d register write failed\n", __func__,
+ MAX77686_REG_PMIC_BUCK2DVS1);
+ return -1;
+ }
+
+ if (pmic_reg_update(p, MAX77686_REG_PMIC_BUCK2CTRL1,
+ MAX77686_BUCK2CTRL_ON))
+ return -1;
+
+ /* VDD_INT */
+ if (pmic_reg_write(p, MAX77686_REG_PMIC_BUCK3DVS1,
+ MAX77686_BUCK3DVS1_1_0125V)) {
+ debug("%s: PMIC %d register write failed\n", __func__,
+ MAX77686_REG_PMIC_BUCK3DVS1);
+ return -1;
+ }
+
+ if (pmic_reg_update(p, MAX77686_REG_PMIC_BUCK3CTRL,
+ MAX77686_BUCK3CTRL_ON))
+ return -1;
+
+ /* VDD_G3D */
+ if (pmic_reg_write(p, MAX77686_REG_PMIC_BUCK4DVS1,
+ MAX77686_BUCK4DVS1_1_2V)) {
+ debug("%s: PMIC %d register write failed\n", __func__,
+ MAX77686_REG_PMIC_BUCK4DVS1);
+ return -1;
+ }
+
+ if (pmic_reg_update(p, MAX77686_REG_PMIC_BUCK4CTRL1,
+ MAX77686_BUCK3CTRL_ON))
+ return -1;
+
+ /* VDD_LDO2 */
+ if (pmic_reg_update(p, MAX77686_REG_PMIC_LDO2CTRL1,
+ MAX77686_LD02CTRL1_1_5V | EN_LDO))
+ return -1;
+
+ /* VDD_LDO3 */
+ if (pmic_reg_update(p, MAX77686_REG_PMIC_LDO3CTRL1,
+ MAX77686_LD03CTRL1_1_8V | EN_LDO))
+ return -1;
+
+ /* VDD_LDO5 */
+ if (pmic_reg_update(p, MAX77686_REG_PMIC_LDO5CTRL1,
+ MAX77686_LD05CTRL1_1_8V | EN_LDO))
+ return -1;
+
+ /* VDD_LDO10 */
+ if (pmic_reg_update(p, MAX77686_REG_PMIC_LDO10CTRL1,
+ MAX77686_LD10CTRL1_1_8V | EN_LDO))
+ return -1;
+
+ return 0;
+}
+#endif /* CONFIG_POWER_MAX77686 */
+
+int exynos_power_init(void)
+{
+ int ret = 0;
+
+#ifdef CONFIG_POWER_MAX77686
+ ret = max77686_init();
+ if (ret)
+ return ret;
+#endif
+#ifdef CONFIG_POWER_TPS65090
+ /*
+ * The TPS65090 may not be in the device tree. If so, it is not
+ * an error.
+ */
+ ret = tps65090_init();
+ if (ret == 0 || ret == -ENODEV)
+ return 0;
+#endif
+
+ return ret;
+}
+#endif /* CONFIG_POWER */
+
#ifdef CONFIG_LCD
+static int board_dp_bridge_setup(void)
+{
+ const int max_tries = 10;
+ int num_tries, node;
+
+ /*
+ * TODO(sjg): Use device tree for GPIOs when exynos GPIO
+ * numbering patch is in mainline.
+ */
+ debug("%s\n", __func__);
+ node = fdtdec_next_compatible(gd->fdt_blob, 0, COMPAT_NXP_PTN3460);
+ if (node < 0) {
+ debug("%s: No node for DP bridge in device tree\n", __func__);
+ return -ENODEV;
+ }
+
+ /* Setup the GPIOs */
+
+ /* PD is ACTIVE_LOW, and initially de-asserted */
+ gpio_set_pull(EXYNOS5_GPIO_Y25, S5P_GPIO_PULL_NONE);
+ gpio_direction_output(EXYNOS5_GPIO_Y25, 1);
+
+ /* Reset is ACTIVE_LOW */
+ gpio_set_pull(EXYNOS5_GPIO_X15, S5P_GPIO_PULL_NONE);
+ gpio_direction_output(EXYNOS5_GPIO_X15, 0);
+
+ udelay(10);
+ gpio_set_value(EXYNOS5_GPIO_X15, 1);
+
+ gpio_direction_input(EXYNOS5_GPIO_X07);
+
+ /*
+ * We need to wait for 90ms after bringing up the bridge since there
+ * is a phantom "high" on the HPD chip during its bootup. The phantom
+ * high comes within 7ms of de-asserting PD and persists for at least
+ * 15ms. The real high comes roughly 50ms after PD is de-asserted. The
+ * phantom high makes it hard for us to know when the NXP chip is up.
+ */
+ mdelay(90);
+
+ for (num_tries = 0; num_tries < max_tries; num_tries++) {
+ /* Check HPD. If it's high, we're all good. */
+ if (gpio_get_value(EXYNOS5_GPIO_X07))
+ return 0;
+
+ debug("%s: eDP bridge failed to come up; try %d of %d\n",
+ __func__, num_tries, max_tries);
+ }
+
+ /* Immediately go into bridge reset if the hp line is not high */
+ return -ENODEV;
+}
+
void exynos_cfg_lcd_gpio(void)
{
/* For Backlight */
@@ -60,4 +251,49 @@ void exynos_set_dp_phy(unsigned int onoff)
{
set_dp_phy_ctrl(onoff);
}
+
+void exynos_backlight_on(unsigned int on)
+{
+ debug("%s(%u)\n", __func__, on);
+
+ if (!on)
+ return;
+
+#ifdef CONFIG_POWER_TPS65090
+ int ret;
+
+ ret = tps65090_fet_enable(1); /* Enable FET1, backlight */
+ if (ret)
+ return;
+
+ /* T5 in the LCD timing spec (defined as > 10ms) */
+ mdelay(10);
+
+ /* board_dp_backlight_pwm */
+ gpio_direction_output(EXYNOS5_GPIO_B20, 1);
+
+ /* T6 in the LCD timing spec (defined as > 10ms) */
+ mdelay(10);
+
+ /* board_dp_backlight_en */
+ gpio_direction_output(EXYNOS5_GPIO_X30, 1);
+#endif
+}
+
+void exynos_lcd_power_on(void)
+{
+ int ret;
+
+ debug("%s\n", __func__);
+
+#ifdef CONFIG_POWER_TPS65090
+ /* board_dp_lcd_vdd */
+ tps65090_fet_enable(6); /* Enable FET6, lcd panel */
+#endif
+
+ ret = board_dp_bridge_setup();
+ if (ret && ret != -ENODEV)
+ printf("LCD bridge failed to enable: %d\n", ret);
+}
+
#endif
diff --git a/board/samsung/smdk5250/smdk5250.c b/board/samsung/smdk5250/smdk5250.c
deleted file mode 100644
index 014b7bd..0000000
--- a/board/samsung/smdk5250/smdk5250.c
+++ /dev/null
@@ -1,363 +0,0 @@
-/*
- * Copyright (C) 2012 Samsung Electronics
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <cros_ec.h>
-#include <fdtdec.h>
-#include <asm/io.h>
-#include <errno.h>
-#include <i2c.h>
-#include <lcd.h>
-#include <netdev.h>
-#include <spi.h>
-#include <asm/arch/cpu.h>
-#include <asm/arch/dwmmc.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/mmc.h>
-#include <asm/arch/pinmux.h>
-#include <asm/arch/power.h>
-#include <asm/arch/sromc.h>
-#include <asm/arch/dp_info.h>
-#include <power/pmic.h>
-#include <power/max77686_pmic.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#ifdef CONFIG_SOUND_MAX98095
-static void board_enable_audio_codec(void)
-{
- /* Enable MAX98095 Codec */
- gpio_direction_output(EXYNOS5_GPIO_X17, 1);
- gpio_set_pull(EXYNOS5_GPIO_X17, S5P_GPIO_PULL_NONE);
-}
-#endif
-
-int exynos_init(void)
-{
-#ifdef CONFIG_SOUND_MAX98095
- board_enable_audio_codec();
-#endif
- return 0;
-}
-
-int board_eth_init(bd_t *bis)
-{
-#ifdef CONFIG_SMC911X
- u32 smc_bw_conf, smc_bc_conf;
- struct fdt_sromc config;
- fdt_addr_t base_addr;
-
- /* Non-FDT configuration - bank number and timing parameters*/
- config.bank = CONFIG_ENV_SROM_BANK;
- config.width = 2;
-
- config.timing[FDT_SROM_TACS] = 0x01;
- config.timing[FDT_SROM_TCOS] = 0x01;
- config.timing[FDT_SROM_TACC] = 0x06;
- config.timing[FDT_SROM_TCOH] = 0x01;
- config.timing[FDT_SROM_TAH] = 0x0C;
- config.timing[FDT_SROM_TACP] = 0x09;
- config.timing[FDT_SROM_PMC] = 0x01;
- base_addr = CONFIG_SMC911X_BASE;
-
- /* Ethernet needs data bus width of 16 bits */
- if (config.width != 2) {
- debug("%s: Unsupported bus width %d\n", __func__,
- config.width);
- return -1;
- }
- smc_bw_conf = SROMC_DATA16_WIDTH(config.bank)
- | SROMC_BYTE_ENABLE(config.bank);
-
- smc_bc_conf = SROMC_BC_TACS(config.timing[FDT_SROM_TACS]) |\
- SROMC_BC_TCOS(config.timing[FDT_SROM_TCOS]) |\
- SROMC_BC_TACC(config.timing[FDT_SROM_TACC]) |\
- SROMC_BC_TCOH(config.timing[FDT_SROM_TCOH]) |\
- SROMC_BC_TAH(config.timing[FDT_SROM_TAH]) |\
- SROMC_BC_TACP(config.timing[FDT_SROM_TACP]) |\
- SROMC_BC_PMC(config.timing[FDT_SROM_PMC]);
-
- /* Select and configure the SROMC bank */
- exynos_pinmux_config(PERIPH_ID_SROMC, config.bank);
- s5p_config_sromc(config.bank, smc_bw_conf, smc_bc_conf);
- return smc911x_initialize(0, base_addr);
-#endif
- return 0;
-}
-
-#ifdef CONFIG_DISPLAY_BOARDINFO
-int checkboard(void)
-{
- printf("\nBoard: SMDK5250\n");
- return 0;
-}
-#endif
-
-#ifdef CONFIG_GENERIC_MMC
-int board_mmc_init(bd_t *bis)
-{
- int err, ret = 0, index, bus_width;
- u32 base;
-
- err = exynos_pinmux_config(PERIPH_ID_SDMMC0, PINMUX_FLAG_8BIT_MODE);
- if (err)
- debug("SDMMC0 not configured\n");
- ret |= err;
-
- /*EMMC: dwmmc Channel-0 with 8 bit bus width */
- index = 0;
- base = samsung_get_base_mmc() + (0x10000 * index);
- bus_width = 8;
- err = exynos_dwmci_add_port(index, base, bus_width, (u32)NULL);
- if (err)
- debug("dwmmc Channel-0 init failed\n");
- ret |= err;
-
- err = exynos_pinmux_config(PERIPH_ID_SDMMC2, PINMUX_FLAG_NONE);
- if (err)
- debug("SDMMC2 not configured\n");
- ret |= err;
-
- /*SD: dwmmc Channel-2 with 4 bit bus width */
- index = 2;
- base = samsung_get_base_mmc() + (0x10000 * index);
- bus_width = 4;
- err = exynos_dwmci_add_port(index, base, bus_width, (u32)NULL);
- if (err)
- debug("dwmmc Channel-2 init failed\n");
- ret |= err;
-
- return ret;
-}
-#endif
-
-void board_i2c_init(const void *blob)
-{
- int i;
-
- for (i = 0; i < CONFIG_MAX_I2C_NUM; i++) {
- exynos_pinmux_config((PERIPH_ID_I2C0 + i),
- PINMUX_FLAG_NONE);
- }
-}
-
-#if defined(CONFIG_POWER)
-#ifdef CONFIG_POWER_MAX77686
-static int pmic_reg_update(struct pmic *p, int reg, uint regval)
-{
- u32 val;
- int ret = 0;
-
- ret = pmic_reg_read(p, reg, &val);
- if (ret) {
- debug("%s: PMIC %d register read failed\n", __func__, reg);
- return -1;
- }
- val |= regval;
- ret = pmic_reg_write(p, reg, val);
- if (ret) {
- debug("%s: PMIC %d register write failed\n", __func__, reg);
- return -1;
- }
- return 0;
-}
-
-static int max77686_init(void)
-{
- struct pmic *p;
-
- if (pmic_init(I2C_PMIC))
- return -1;
-
- p = pmic_get("MAX77686_PMIC");
- if (!p)
- return -ENODEV;
-
- if (pmic_probe(p))
- return -1;
-
- if (pmic_reg_update(p, MAX77686_REG_PMIC_32KHZ, MAX77686_32KHCP_EN))
- return -1;
-
- if (pmic_reg_update(p, MAX77686_REG_PMIC_BBAT,
- MAX77686_BBCHOSTEN | MAX77686_BBCVS_3_5V))
- return -1;
-
- /* VDD_MIF */
- if (pmic_reg_write(p, MAX77686_REG_PMIC_BUCK1OUT,
- MAX77686_BUCK1OUT_1V)) {
- debug("%s: PMIC %d register write failed\n", __func__,
- MAX77686_REG_PMIC_BUCK1OUT);
- return -1;
- }
-
- if (pmic_reg_update(p, MAX77686_REG_PMIC_BUCK1CRTL,
- MAX77686_BUCK1CTRL_EN))
- return -1;
-
- /* VDD_ARM */
- if (pmic_reg_write(p, MAX77686_REG_PMIC_BUCK2DVS1,
- MAX77686_BUCK2DVS1_1_3V)) {
- debug("%s: PMIC %d register write failed\n", __func__,
- MAX77686_REG_PMIC_BUCK2DVS1);
- return -1;
- }
-
- if (pmic_reg_update(p, MAX77686_REG_PMIC_BUCK2CTRL1,
- MAX77686_BUCK2CTRL_ON))
- return -1;
-
- /* VDD_INT */
- if (pmic_reg_write(p, MAX77686_REG_PMIC_BUCK3DVS1,
- MAX77686_BUCK3DVS1_1_0125V)) {
- debug("%s: PMIC %d register write failed\n", __func__,
- MAX77686_REG_PMIC_BUCK3DVS1);
- return -1;
- }
-
- if (pmic_reg_update(p, MAX77686_REG_PMIC_BUCK3CTRL,
- MAX77686_BUCK3CTRL_ON))
- return -1;
-
- /* VDD_G3D */
- if (pmic_reg_write(p, MAX77686_REG_PMIC_BUCK4DVS1,
- MAX77686_BUCK4DVS1_1_2V)) {
- debug("%s: PMIC %d register write failed\n", __func__,
- MAX77686_REG_PMIC_BUCK4DVS1);
- return -1;
- }
-
- if (pmic_reg_update(p, MAX77686_REG_PMIC_BUCK4CTRL1,
- MAX77686_BUCK3CTRL_ON))
- return -1;
-
- /* VDD_LDO2 */
- if (pmic_reg_update(p, MAX77686_REG_PMIC_LDO2CTRL1,
- MAX77686_LD02CTRL1_1_5V | EN_LDO))
- return -1;
-
- /* VDD_LDO3 */
- if (pmic_reg_update(p, MAX77686_REG_PMIC_LDO3CTRL1,
- MAX77686_LD03CTRL1_1_8V | EN_LDO))
- return -1;
-
- /* VDD_LDO5 */
- if (pmic_reg_update(p, MAX77686_REG_PMIC_LDO5CTRL1,
- MAX77686_LD05CTRL1_1_8V | EN_LDO))
- return -1;
-
- /* VDD_LDO10 */
- if (pmic_reg_update(p, MAX77686_REG_PMIC_LDO10CTRL1,
- MAX77686_LD10CTRL1_1_8V | EN_LDO))
- return -1;
-
- return 0;
-}
-#endif /* CONFIG_POWER_MAX77686 */
-
-int exynos_power_init(void)
-{
- int ret = 0;
-
-#ifdef CONFIG_POWER_MAX77686
- ret = max77686_init();
-#endif
- return ret;
-}
-#endif /* CONFIG_POWER */
-
-#ifdef CONFIG_LCD
-void exynos_cfg_lcd_gpio(void)
-{
-
- /* For Backlight */
- gpio_cfg_pin(EXYNOS5_GPIO_B20, S5P_GPIO_OUTPUT);
- gpio_set_value(EXYNOS5_GPIO_B20, 1);
-
- /* LCD power on */
- gpio_cfg_pin(EXYNOS5_GPIO_X15, S5P_GPIO_OUTPUT);
- gpio_set_value(EXYNOS5_GPIO_X15, 1);
-
- /* Set Hotplug detect for DP */
- gpio_cfg_pin(EXYNOS5_GPIO_X07, S5P_GPIO_FUNC(0x3));
-}
-
-void exynos_set_dp_phy(unsigned int onoff)
-{
- set_dp_phy_ctrl(onoff);
-}
-
-vidinfo_t panel_info = {
- .vl_freq = 60,
- .vl_col = 2560,
- .vl_row = 1600,
- .vl_width = 2560,
- .vl_height = 1600,
- .vl_clkp = CONFIG_SYS_LOW,
- .vl_hsp = CONFIG_SYS_LOW,
- .vl_vsp = CONFIG_SYS_LOW,
- .vl_dp = CONFIG_SYS_LOW,
- .vl_bpix = 4, /* LCD_BPP = 2^4, for output conosle on LCD */
-
- /* wDP panel timing infomation */
- .vl_hspw = 32,
- .vl_hbpd = 80,
- .vl_hfpd = 48,
-
- .vl_vspw = 6,
- .vl_vbpd = 37,
- .vl_vfpd = 3,
- .vl_cmd_allow_len = 0xf,
-
- .win_id = 3,
- .dual_lcd_enabled = 0,
-
- .init_delay = 0,
- .power_on_delay = 0,
- .reset_delay = 0,
- .interface_mode = FIMD_RGB_INTERFACE,
- .dp_enabled = 1,
-};
-
-static struct edp_device_info edp_info = {
- .disp_info = {
- .h_res = 2560,
- .h_sync_width = 32,
- .h_back_porch = 80,
- .h_front_porch = 48,
- .v_res = 1600,
- .v_sync_width = 6,
- .v_back_porch = 37,
- .v_front_porch = 3,
- .v_sync_rate = 60,
- },
- .lt_info = {
- .lt_status = DP_LT_NONE,
- },
- .video_info = {
- .master_mode = 0,
- .bist_mode = DP_DISABLE,
- .bist_pattern = NO_PATTERN,
- .h_sync_polarity = 0,
- .v_sync_polarity = 0,
- .interlaced = 0,
- .color_space = COLOR_RGB,
- .dynamic_range = VESA,
- .ycbcr_coeff = COLOR_YCBCR601,
- .color_depth = COLOR_8,
- },
-};
-
-static struct exynos_dp_platform_data dp_platform_data = {
- .edp_dev_info = &edp_info,
-};
-
-void init_panel_info(vidinfo_t *vid)
-{
- vid->rgb_mode = MODE_RGB_P;
- exynos_set_dp_platform_data(&dp_platform_data);
-}
-#endif
diff --git a/board/samsung/smdk5420/smdk5420.c b/board/samsung/smdk5420/smdk5420.c
index 9207522..183c522 100644
--- a/board/samsung/smdk5420/smdk5420.c
+++ b/board/samsung/smdk5420/smdk5420.c
@@ -42,9 +42,6 @@ int exynos_init(void)
#ifdef CONFIG_LCD
void cfg_lcd_gpio(void)
{
- struct exynos5_gpio_part1 *gpio1 =
- (struct exynos5_gpio_part1 *)samsung_get_base_gpio_part1();
-
/* For Backlight */
gpio_cfg_pin(EXYNOS5420_GPIO_B20, S5P_GPIO_OUTPUT);
gpio_set_value(EXYNOS5420_GPIO_B20, 1);
diff --git a/doc/device-tree-bindings/exynos/dwmmc.txt b/doc/device-tree-bindings/exynos/dwmmc.txt
index 566da3b..694d195 100644
--- a/doc/device-tree-bindings/exynos/dwmmc.txt
+++ b/doc/device-tree-bindings/exynos/dwmmc.txt
@@ -1,18 +1,18 @@
-* Exynos 5250 DWC_mobile_storage
+* Exynos DWC_mobile_storage
-The Exynos 5250 provides DWC_mobile_storage interface which supports
+The Exynos provides DWC_mobile_storage interface which supports
. Embedded Multimedia Cards (EMMC-version 4.5)
. Secure Digital memory (SD mem-version 2.0)
. Secure Digital I/O (SDIO-version 3.0)
. Consumer Electronics Advanced Transport Architecture (CE-ATA-version 1.1)
-The Exynos 5250 DWC_mobile_storage provides four channels.
+The Exynos DWC_mobile_storage provides four channels.
SOC specific and Board specific properties are channel specific.
Required SoC Specific Properties:
- compatible: should be
- - samsung,exynos5250-dwmmc: for exynos5250 platforms
+ - samsung,exynos-dwmmc: for exynos platforms
- reg: physical base address of the controller and length of memory mapped
region.
diff --git a/doc/device-tree-bindings/power/tps65090.txt b/doc/device-tree-bindings/power/tps65090.txt
new file mode 100644
index 0000000..8e5e0d3
--- /dev/null
+++ b/doc/device-tree-bindings/power/tps65090.txt
@@ -0,0 +1,17 @@
+TPS65090 Frontend PMU with Switchmode Charger
+
+Required Properties:
+-compatible: "ti,tps65090-charger"
+
+Optional Properties:
+-ti,enable-low-current-chrg: Enables charging when a low current is detected
+ while the default logic is to stop charging.
+
+This node is a subnode of the tps65090 PMIC.
+
+Example:
+
+ tps65090-charger {
+ compatible = "ti,tps65090-charger";
+ ti,enable-low-current-chrg;
+ };
diff --git a/doc/device-tree-bindings/regulator/tps65090.txt b/doc/device-tree-bindings/regulator/tps65090.txt
new file mode 100644
index 0000000..313a60b
--- /dev/null
+++ b/doc/device-tree-bindings/regulator/tps65090.txt
@@ -0,0 +1,122 @@
+TPS65090 regulators
+
+Required properties:
+- compatible: "ti,tps65090"
+- reg: I2C slave address
+- interrupts: the interrupt outputs of the controller
+- regulators: A node that houses a sub-node for each regulator within the
+ device. Each sub-node is identified using the node's name, with valid
+ values listed below. The content of each sub-node is defined by the
+ standard binding for regulators; see regulator.txt.
+ dcdc[1-3], fet[1-7] and ldo[1-2] respectively.
+- vsys[1-3]-supply: The input supply for DCDC[1-3] respectively.
+- infet[1-7]-supply: The input supply for FET[1-7] respectively.
+- vsys-l[1-2]-supply: The input supply for LDO[1-2] respectively.
+
+Optional properties:
+- ti,enable-ext-control: This is applicable for DCDC1, DCDC2 and DCDC3.
+ If DCDCs are externally controlled then this property should be there.
+- "dcdc-ext-control-gpios: This is applicable for DCDC1, DCDC2 and DCDC3.
+ If DCDCs are externally controlled and if it is from GPIO then GPIO
+ number should be provided. If it is externally controlled and no GPIO
+ entry then driver will just configure this rails as external control
+ and will not provide any enable/disable APIs.
+
+Each regulator is defined using the standard binding for regulators.
+
+Example:
+
+ tps65090@48 {
+ compatible = "ti,tps65090";
+ reg = <0x48>;
+ interrupts = <0 88 0x4>;
+
+ vsys1-supply = <&some_reg>;
+ vsys2-supply = <&some_reg>;
+ vsys3-supply = <&some_reg>;
+ infet1-supply = <&some_reg>;
+ infet2-supply = <&some_reg>;
+ infet3-supply = <&some_reg>;
+ infet4-supply = <&some_reg>;
+ infet5-supply = <&some_reg>;
+ infet6-supply = <&some_reg>;
+ infet7-supply = <&some_reg>;
+ vsys_l1-supply = <&some_reg>;
+ vsys_l2-supply = <&some_reg>;
+
+ regulators {
+ dcdc1 {
+ regulator-name = "dcdc1";
+ regulator-boot-on;
+ regulator-always-on;
+ ti,enable-ext-control;
+ dcdc-ext-control-gpios = <&gpio 10 0>;
+ };
+
+ dcdc2 {
+ regulator-name = "dcdc2";
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ dcdc3 {
+ regulator-name = "dcdc3";
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ fet1 {
+ regulator-name = "fet1";
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ fet2 {
+ regulator-name = "fet2";
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ fet3 {
+ regulator-name = "fet3";
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ fet4 {
+ regulator-name = "fet4";
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ fet5 {
+ regulator-name = "fet5";
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ fet6 {
+ regulator-name = "fet6";
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ fet7 {
+ regulator-name = "fet7";
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo1 {
+ regulator-name = "ldo1";
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo2 {
+ regulator-name = "ldo2";
+ regulator-boot-on;
+ regulator-always-on;
+ };
+ };
+ };
diff --git a/drivers/mmc/dw_mmc.c b/drivers/mmc/dw_mmc.c
index eb4e2be..5bf36a0 100644
--- a/drivers/mmc/dw_mmc.c
+++ b/drivers/mmc/dw_mmc.c
@@ -284,8 +284,8 @@ static int dwmci_setup_bus(struct dwmci_host *host, u32 freq)
static void dwmci_set_ios(struct mmc *mmc)
{
- struct dwmci_host *host = mmc->priv;
- u32 ctype;
+ struct dwmci_host *host = (struct dwmci_host *)mmc->priv;
+ u32 ctype, regs;
debug("Buswidth = %d, clock: %d\n",mmc->bus_width, mmc->clock);
@@ -304,6 +304,14 @@ static void dwmci_set_ios(struct mmc *mmc)
dwmci_writel(host, DWMCI_CTYPE, ctype);
+ regs = dwmci_readl(host, DWMCI_UHS_REG);
+ if (mmc->card_caps & MMC_MODE_DDR_52MHz)
+ regs |= DWMCI_DDR_MODE;
+ else
+ regs &= DWMCI_DDR_MODE;
+
+ dwmci_writel(host, DWMCI_UHS_REG, regs);
+
if (host->clksel)
host->clksel(host);
}
diff --git a/drivers/mmc/exynos_dw_mmc.c b/drivers/mmc/exynos_dw_mmc.c
index de8cdcc..d96dfe1 100644
--- a/drivers/mmc/exynos_dw_mmc.c
+++ b/drivers/mmc/exynos_dw_mmc.c
@@ -13,6 +13,8 @@
#include <asm/arch/dwmmc.h>
#include <asm/arch/clk.h>
#include <asm/arch/pinmux.h>
+#include <asm/gpio.h>
+#include <asm-generic/errno.h>
#define DWMMC_MAX_CH_NUM 4
#define DWMMC_MAX_FREQ 52000000
@@ -44,7 +46,11 @@ unsigned int exynos_dwmci_get_clk(struct dwmci_host *host)
& DWMCI_DIVRATIO_MASK) + 1;
sclk = get_mmc_clk(host->dev_index);
- return sclk / clk_div;
+ /*
+ * Assume to know divider value.
+ * When clock unit is broken, need to set "host->div"
+ */
+ return sclk / clk_div / (host->div + 1);
}
static void exynos_dwmci_board_init(struct dwmci_host *host)
@@ -60,48 +66,36 @@ static void exynos_dwmci_board_init(struct dwmci_host *host)
}
}
-/*
- * This function adds the mmc channel to be registered with mmc core.
- * index - mmc channel number.
- * regbase - register base address of mmc channel specified in 'index'.
- * bus_width - operating bus width of mmc channel specified in 'index'.
- * clksel - value to be written into CLKSEL register in case of FDT.
- * NULL in case od non-FDT.
- */
-int exynos_dwmci_add_port(int index, u32 regbase, int bus_width, u32 clksel)
+static int exynos_dwmci_core_init(struct dwmci_host *host, int index)
{
- struct dwmci_host *host = NULL;
unsigned int div;
unsigned long freq, sclk;
- host = malloc(sizeof(struct dwmci_host));
- if (!host) {
- printf("dwmci_host malloc fail!\n");
- return 1;
- }
+
+ if (host->bus_hz)
+ freq = host->bus_hz;
+ else
+ freq = DWMMC_MAX_FREQ;
+
/* request mmc clock vlaue of 52MHz. */
- freq = 52000000;
sclk = get_mmc_clk(index);
div = DIV_ROUND_UP(sclk, freq);
/* set the clock divisor for mmc */
set_mmc_clk(index, div);
host->name = "EXYNOS DWMMC";
- host->ioaddr = (void *)regbase;
- host->buswidth = bus_width;
#ifdef CONFIG_EXYNOS5420
host->quirks = DWMCI_QUIRK_DISABLE_SMU;
#endif
host->board_init = exynos_dwmci_board_init;
- if (clksel) {
- host->clksel_val = clksel;
- } else {
- if (0 == index)
+ if (!host->clksel_val) {
+ if (index == 0)
host->clksel_val = DWMMC_MMC0_CLKSEL_VAL;
- if (2 == index)
+ else if (index == 2)
host->clksel_val = DWMMC_MMC2_CLKSEL_VAL;
}
+ host->caps = MMC_MODE_DDR_52MHz;
host->clksel = exynos_dwmci_clksel;
host->dev_index = index;
host->get_mmc_clk = exynos_dwmci_get_clk;
@@ -113,69 +107,134 @@ int exynos_dwmci_add_port(int index, u32 regbase, int bus_width, u32 clksel)
return 0;
}
+/*
+ * This function adds the mmc channel to be registered with mmc core.
+ * index - mmc channel number.
+ * regbase - register base address of mmc channel specified in 'index'.
+ * bus_width - operating bus width of mmc channel specified in 'index'.
+ * clksel - value to be written into CLKSEL register in case of FDT.
+ * NULL in case od non-FDT.
+ */
+int exynos_dwmci_add_port(int index, u32 regbase, int bus_width, u32 clksel)
+{
+ struct dwmci_host *host = NULL;
+
+ host = malloc(sizeof(struct dwmci_host));
+ if (!host) {
+ error("dwmci_host malloc fail!\n");
+ return -ENOMEM;
+ }
+
+ host->ioaddr = (void *)regbase;
+ host->buswidth = bus_width;
+
+ if (clksel)
+ host->clksel_val = clksel;
+
+ return exynos_dwmci_core_init(host, index);
+}
+
#ifdef CONFIG_OF_CONTROL
-int exynos_dwmmc_init(const void *blob)
+static struct dwmci_host dwmci_host[DWMMC_MAX_CH_NUM];
+
+static int do_dwmci_init(struct dwmci_host *host)
{
- int index, bus_width;
- int node_list[DWMMC_MAX_CH_NUM];
- int err = 0, dev_id, flag, count, i;
- u32 clksel_val, base, timing[3];
+ int index, flag, err;
- count = fdtdec_find_aliases_for_id(blob, "mmc",
- COMPAT_SAMSUNG_EXYNOS5_DWMMC, node_list,
- DWMMC_MAX_CH_NUM);
+ index = host->dev_index;
- for (i = 0; i < count; i++) {
- int node = node_list[i];
+ flag = host->buswidth == 8 ? PINMUX_FLAG_8BIT_MODE : PINMUX_FLAG_NONE;
+ err = exynos_pinmux_config(host->dev_id, flag);
+ if (err) {
+ debug("DWMMC not configure\n");
+ return err;
+ }
- if (node <= 0)
- continue;
+ return exynos_dwmci_core_init(host, index);
+}
- /* Extract device id for each mmc channel */
- dev_id = pinmux_decode_periph_id(blob, node);
+static int exynos_dwmci_get_config(const void *blob, int node,
+ struct dwmci_host *host)
+{
+ int err = 0;
+ u32 base, clksel_val, timing[3];
- /* Get the bus width from the device node */
- bus_width = fdtdec_get_int(blob, node, "samsung,bus-width", 0);
- if (bus_width <= 0) {
- debug("DWMMC: Can't get bus-width\n");
- return -1;
- }
- if (8 == bus_width)
- flag = PINMUX_FLAG_8BIT_MODE;
- else
- flag = PINMUX_FLAG_NONE;
+ /* Extract device id for each mmc channel */
+ host->dev_id = pinmux_decode_periph_id(blob, node);
- /* config pinmux for each mmc channel */
- err = exynos_pinmux_config(dev_id, flag);
- if (err) {
- debug("DWMMC not configured\n");
- return err;
- }
+ /* Get the bus width from the device node */
+ host->buswidth = fdtdec_get_int(blob, node, "samsung,bus-width", 0);
+ if (host->buswidth <= 0) {
+ debug("DWMMC: Can't get bus-width\n");
+ return -EINVAL;
+ }
- index = dev_id - PERIPH_ID_SDMMC0;
+ host->dev_index = fdtdec_get_int(blob, node, "index", host->dev_id);
+ if (host->dev_index == host->dev_id)
+ host->dev_index = host->dev_id - PERIPH_ID_SDMMC0;
- /* Get the base address from the device node */
- base = fdtdec_get_addr(blob, node, "reg");
- if (!base) {
- debug("DWMMC: Can't get base address\n");
- return -1;
- }
- /* Extract the timing info from the node */
- err = fdtdec_get_int_array(blob, node, "samsung,timing",
- timing, 3);
+ /* Set the base address from the device node */
+ base = fdtdec_get_addr(blob, node, "reg");
+ if (!base) {
+ debug("DWMMC: Can't get base address\n");
+ return -EINVAL;
+ }
+ host->ioaddr = (void *)base;
+
+ /* Extract the timing info from the node */
+ err = fdtdec_get_int_array(blob, node, "samsung,timing", timing, 3);
+ if (err) {
+ debug("Can't get sdr-timings for devider\n");
+ return -EINVAL;
+ }
+
+ clksel_val = (DWMCI_SET_SAMPLE_CLK(timing[0]) |
+ DWMCI_SET_DRV_CLK(timing[1]) |
+ DWMCI_SET_DIV_RATIO(timing[2]));
+ if (clksel_val)
+ host->clksel_val = clksel_val;
+
+ host->fifoth_val = fdtdec_get_int(blob, node, "fifoth_val", 0);
+ host->bus_hz = fdtdec_get_int(blob, node, "bus_hz", 0);
+ host->div = fdtdec_get_int(blob, node, "div", 0);
+
+ return 0;
+}
+
+static int exynos_dwmci_process_node(const void *blob,
+ int node_list[], int count)
+{
+ struct dwmci_host *host;
+ int i, node, err;
+
+ for (i = 0; i < count; i++) {
+ node = node_list[i];
+ if (node <= 0)
+ continue;
+ host = &dwmci_host[i];
+ err = exynos_dwmci_get_config(blob, node, host);
if (err) {
- debug("Can't get sdr-timings for divider\n");
- return -1;
+ debug("%s: failed to decode dev %d\n", __func__, i);
+ return err;
}
- clksel_val = (DWMCI_SET_SAMPLE_CLK(timing[0]) |
- DWMCI_SET_DRV_CLK(timing[1]) |
- DWMCI_SET_DIV_RATIO(timing[2]));
- /* Initialise each mmc channel */
- err = exynos_dwmci_add_port(index, base, bus_width, clksel_val);
- if (err)
- debug("dwmmc Channel-%d init failed\n", index);
+ do_dwmci_init(host);
}
return 0;
}
+
+int exynos_dwmmc_init(const void *blob)
+{
+ int compat_id;
+ int node_list[DWMMC_MAX_CH_NUM];
+ int err = 0, count;
+
+ compat_id = COMPAT_SAMSUNG_EXYNOS_DWMMC;
+
+ count = fdtdec_find_aliases_for_id(blob, "mmc",
+ compat_id, node_list, DWMMC_MAX_CH_NUM);
+ err = exynos_dwmci_process_node(blob, node_list, count);
+
+ return err;
+}
#endif
diff --git a/drivers/mmc/mmc.c b/drivers/mmc/mmc.c
index 8b53ead..55c2c68 100644
--- a/drivers/mmc/mmc.c
+++ b/drivers/mmc/mmc.c
@@ -160,6 +160,9 @@ int mmc_set_blocklen(struct mmc *mmc, int len)
{
struct mmc_cmd cmd;
+ if (mmc->card_caps & MMC_MODE_DDR_52MHz)
+ return 0;
+
cmd.cmdidx = MMC_CMD_SET_BLOCKLEN;
cmd.resp_type = MMC_RSP_R1;
cmd.cmdarg = len;
@@ -516,10 +519,13 @@ static int mmc_change_freq(struct mmc *mmc)
return 0;
/* High Speed is set, there are two types: 52MHz and 26MHz */
- if (cardtype & MMC_HS_52MHZ)
+ if (cardtype & EXT_CSD_CARD_TYPE_52) {
+ if (cardtype & EXT_CSD_CARD_TYPE_DDR_52)
+ mmc->card_caps |= MMC_MODE_DDR_52MHz;
mmc->card_caps |= MMC_MODE_HS_52MHz | MMC_MODE_HS;
- else
+ } else {
mmc->card_caps |= MMC_MODE_HS;
+ }
return 0;
}
@@ -1082,6 +1088,8 @@ static int mmc_startup(struct mmc *mmc)
/* An array of possible bus widths in order of preference */
static unsigned ext_csd_bits[] = {
+ EXT_CSD_DDR_BUS_WIDTH_8,
+ EXT_CSD_DDR_BUS_WIDTH_4,
EXT_CSD_BUS_WIDTH_8,
EXT_CSD_BUS_WIDTH_4,
EXT_CSD_BUS_WIDTH_1,
@@ -1089,13 +1097,15 @@ static int mmc_startup(struct mmc *mmc)
/* An array to map CSD bus widths to host cap bits */
static unsigned ext_to_hostcaps[] = {
+ [EXT_CSD_DDR_BUS_WIDTH_4] = MMC_MODE_DDR_52MHz,
+ [EXT_CSD_DDR_BUS_WIDTH_8] = MMC_MODE_DDR_52MHz,
[EXT_CSD_BUS_WIDTH_4] = MMC_MODE_4BIT,
[EXT_CSD_BUS_WIDTH_8] = MMC_MODE_8BIT,
};
/* An array to map chosen bus width to an integer */
static unsigned widths[] = {
- 8, 4, 1,
+ 8, 4, 8, 4, 1,
};
for (idx=0; idx < ARRAY_SIZE(ext_csd_bits); idx++) {
diff --git a/drivers/mmc/s5p_sdhci.c b/drivers/mmc/s5p_sdhci.c
index ccae4cc..2ff0ec2 100644
--- a/drivers/mmc/s5p_sdhci.c
+++ b/drivers/mmc/s5p_sdhci.c
@@ -65,17 +65,9 @@ static void s5p_sdhci_set_control_reg(struct sdhci_host *host)
sdhci_writel(host, ctrl, SDHCI_CONTROL2);
}
-int s5p_sdhci_init(u32 regbase, int index, int bus_width)
+static int s5p_sdhci_core_init(struct sdhci_host *host)
{
- struct sdhci_host *host = NULL;
- host = (struct sdhci_host *)malloc(sizeof(struct sdhci_host));
- if (!host) {
- printf("sdhci__host malloc fail!\n");
- return 1;
- }
-
host->name = S5P_NAME;
- host->ioaddr = (void *)regbase;
host->quirks = SDHCI_QUIRK_NO_HISPD_BIT | SDHCI_QUIRK_BROKEN_VOLTAGE |
SDHCI_QUIRK_BROKEN_R1B | SDHCI_QUIRK_32BIT_DMA_ADDR |
@@ -85,15 +77,28 @@ int s5p_sdhci_init(u32 regbase, int index, int bus_width)
host->set_control_reg = &s5p_sdhci_set_control_reg;
host->set_clock = set_mmc_clk;
- host->index = index;
host->host_caps = MMC_MODE_HC;
- if (bus_width == 8)
+ if (host->bus_width == 8)
host->host_caps |= MMC_MODE_8BIT;
return add_sdhci(host, 52000000, 400000);
}
+int s5p_sdhci_init(u32 regbase, int index, int bus_width)
+{
+ struct sdhci_host *host = malloc(sizeof(struct sdhci_host));
+ if (!host) {
+ printf("sdhci__host malloc fail!\n");
+ return 1;
+ }
+ host->ioaddr = (void *)regbase;
+ host->index = index;
+ host->bus_width = bus_width;
+
+ return s5p_sdhci_core_init(host);
+}
+
#ifdef CONFIG_OF_CONTROL
struct sdhci_host sdhci_host[SDHCI_MAX_HOSTS];
@@ -126,20 +131,7 @@ static int do_sdhci_init(struct sdhci_host *host)
}
}
- host->name = S5P_NAME;
-
- host->quirks = SDHCI_QUIRK_NO_HISPD_BIT | SDHCI_QUIRK_BROKEN_VOLTAGE |
- SDHCI_QUIRK_BROKEN_R1B | SDHCI_QUIRK_32BIT_DMA_ADDR |
- SDHCI_QUIRK_WAIT_SEND_CMD;
- host->voltages = MMC_VDD_32_33 | MMC_VDD_33_34 | MMC_VDD_165_195;
- host->version = sdhci_readw(host, SDHCI_HOST_VERSION);
-
- host->set_control_reg = &s5p_sdhci_set_control_reg;
- host->set_clock = set_mmc_clk;
-
- host->host_caps = MMC_MODE_HC;
-
- return add_sdhci(host, 52000000, 400000);
+ return s5p_sdhci_core_init(host);
}
static int sdhci_get_config(const void *blob, int node, struct sdhci_host *host)
diff --git a/drivers/power/battery/bat_trats.c b/drivers/power/battery/bat_trats.c
index 41b179f..bfde692 100644
--- a/drivers/power/battery/bat_trats.c
+++ b/drivers/power/battery/bat_trats.c
@@ -19,7 +19,7 @@ static int power_battery_charge(struct pmic *bat)
struct battery *battery = p_bat->bat;
int k;
- if (bat->chrg->chrg_state(p_bat->chrg, CHARGER_ENABLE, 450))
+ if (bat->chrg->chrg_state(p_bat->chrg, PMIC_CHARGER_ENABLE, 450))
return -1;
for (k = 0; bat->chrg->chrg_bat_present(p_bat->chrg) &&
@@ -42,7 +42,7 @@ static int power_battery_charge(struct pmic *bat)
}
}
exit:
- bat->chrg->chrg_state(p_bat->chrg, CHARGER_DISABLE, 0);
+ bat->chrg->chrg_state(p_bat->chrg, PMIC_CHARGER_DISABLE, 0);
return 0;
}
diff --git a/drivers/power/battery/bat_trats2.c b/drivers/power/battery/bat_trats2.c
index 94015aa..57221ad 100644
--- a/drivers/power/battery/bat_trats2.c
+++ b/drivers/power/battery/bat_trats2.c
@@ -17,7 +17,7 @@ static int power_battery_charge(struct pmic *bat)
{
struct power_battery *p_bat = bat->pbat;
- if (bat->chrg->chrg_state(p_bat->chrg, CHARGER_ENABLE, 450))
+ if (bat->chrg->chrg_state(p_bat->chrg, PMIC_CHARGER_ENABLE, 450))
return -1;
return 0;
diff --git a/drivers/power/mfd/pmic_max77693.c b/drivers/power/mfd/pmic_max77693.c
index 1a4416b..6b28e28 100644
--- a/drivers/power/mfd/pmic_max77693.c
+++ b/drivers/power/mfd/pmic_max77693.c
@@ -22,7 +22,7 @@ static int max77693_charger_state(struct pmic *p, int state, int current)
val = MAX77693_CHG_UNLOCK;
pmic_reg_write(p, MAX77693_CHG_CNFG_06, val);
- if (state == CHARGER_DISABLE) {
+ if (state == PMIC_CHARGER_DISABLE) {
puts("Disable the charger.\n");
pmic_reg_read(p, MAX77693_CHG_CNFG_00, &val);
val &= ~0x01;
diff --git a/drivers/power/pmic/Makefile b/drivers/power/pmic/Makefile
index 920bbdc..9a8bfe0 100644
--- a/drivers/power/pmic/Makefile
+++ b/drivers/power/pmic/Makefile
@@ -11,5 +11,6 @@ obj-$(CONFIG_POWER_MAX8997) += pmic_max8997.o
obj-$(CONFIG_POWER_MUIC_MAX8997) += muic_max8997.o
obj-$(CONFIG_POWER_MAX77686) += pmic_max77686.o
obj-$(CONFIG_POWER_PFUZE100) += pmic_pfuze100.o
+obj-$(CONFIG_POWER_TPS65090) += pmic_tps65090.o
obj-$(CONFIG_POWER_TPS65217) += pmic_tps65217.o
obj-$(CONFIG_POWER_TPS65910) += pmic_tps65910.o
diff --git a/drivers/power/pmic/pmic_max8997.c b/drivers/power/pmic/pmic_max8997.c
index ba01692..a36a9a0 100644
--- a/drivers/power/pmic/pmic_max8997.c
+++ b/drivers/power/pmic/pmic_max8997.c
@@ -35,7 +35,7 @@ static int pmic_charger_state(struct pmic *p, int state, int current)
if (pmic_probe(p))
return -1;
- if (state == CHARGER_DISABLE) {
+ if (state == PMIC_CHARGER_DISABLE) {
puts("Disable the charger.\n");
pmic_reg_read(p, MAX8997_REG_MBCCTRL2, &val);
val &= ~(MBCHOSTEN | VCHGR_FC);
diff --git a/drivers/power/pmic/pmic_tps65090.c b/drivers/power/pmic/pmic_tps65090.c
new file mode 100644
index 0000000..c5b3966
--- /dev/null
+++ b/drivers/power/pmic/pmic_tps65090.c
@@ -0,0 +1,310 @@
+/*
+ * Copyright (c) 2012 The Chromium OS Authors.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <errno.h>
+#include <fdtdec.h>
+#include <i2c.h>
+#include <power/pmic.h>
+#include <power/tps65090_pmic.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#define TPS65090_NAME "TPS65090_PMIC"
+
+/* TPS65090 register addresses */
+enum {
+ REG_IRQ1 = 0,
+ REG_CG_CTRL0 = 4,
+ REG_CG_STATUS1 = 0xa,
+ REG_FET1_CTRL = 0x0f,
+ REG_FET2_CTRL,
+ REG_FET3_CTRL,
+ REG_FET4_CTRL,
+ REG_FET5_CTRL,
+ REG_FET6_CTRL,
+ REG_FET7_CTRL,
+ TPS65090_NUM_REGS,
+};
+
+enum {
+ IRQ1_VBATG = 1 << 3,
+ CG_CTRL0_ENC_MASK = 0x01,
+
+ MAX_FET_NUM = 7,
+ MAX_CTRL_READ_TRIES = 5,
+
+ /* TPS65090 FET_CTRL register values */
+ FET_CTRL_TOFET = 1 << 7, /* Timeout, startup, overload */
+ FET_CTRL_PGFET = 1 << 4, /* Power good for FET status */
+ FET_CTRL_WAIT = 3 << 2, /* Overcurrent timeout max */
+ FET_CTRL_ADENFET = 1 << 1, /* Enable output auto discharge */
+ FET_CTRL_ENFET = 1 << 0, /* Enable FET */
+};
+
+/**
+ * Checks for a valid FET number
+ *
+ * @param fet_id FET number to check
+ * @return 0 if ok, -EINVAL if FET value is out of range
+ */
+static int tps65090_check_fet(unsigned int fet_id)
+{
+ if (fet_id == 0 || fet_id > MAX_FET_NUM) {
+ debug("parameter fet_id is out of range, %u not in 1 ~ %u\n",
+ fet_id, MAX_FET_NUM);
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+/**
+ * Set the power state for a FET
+ *
+ * @param pmic pmic structure for the tps65090
+ * @param fet_id Fet number to set (1..MAX_FET_NUM)
+ * @param set 1 to power on FET, 0 to power off
+ * @return -EIO if we got a comms error, -EAGAIN if the FET failed to
+ * change state. If all is ok, returns 0.
+ */
+static int tps65090_fet_set(struct pmic *pmic, int fet_id, bool set)
+{
+ int retry;
+ u32 reg, value;
+
+ value = FET_CTRL_ADENFET | FET_CTRL_WAIT;
+ if (set)
+ value |= FET_CTRL_ENFET;
+
+ if (pmic_reg_write(pmic, REG_FET1_CTRL + fet_id - 1, value))
+ return -EIO;
+
+ /* Try reading until we get a result */
+ for (retry = 0; retry < MAX_CTRL_READ_TRIES; retry++) {
+ if (pmic_reg_read(pmic, REG_FET1_CTRL + fet_id - 1, &reg))
+ return -EIO;
+
+ /* Check that the fet went into the expected state */
+ if (!!(reg & FET_CTRL_PGFET) == set)
+ return 0;
+
+ /* If we got a timeout, there is no point in waiting longer */
+ if (reg & FET_CTRL_TOFET)
+ break;
+
+ mdelay(1);
+ }
+
+ debug("FET %d: Power good should have set to %d but reg=%#02x\n",
+ fet_id, set, reg);
+ return -EAGAIN;
+}
+
+int tps65090_fet_enable(unsigned int fet_id)
+{
+ struct pmic *pmic;
+ ulong start;
+ int loops;
+ int ret;
+
+ ret = tps65090_check_fet(fet_id);
+ if (ret)
+ return ret;
+
+ pmic = pmic_get(TPS65090_NAME);
+ if (!pmic)
+ return -EACCES;
+
+ start = get_timer(0);
+ for (loops = 0;; loops++) {
+ ret = tps65090_fet_set(pmic, fet_id, true);
+ if (!ret)
+ break;
+
+ if (get_timer(start) > 100)
+ break;
+
+ /* Turn it off and try again until we time out */
+ tps65090_fet_set(pmic, fet_id, false);
+ }
+
+ if (ret)
+ debug("%s: FET%d failed to power on: time=%lums, loops=%d\n",
+ __func__, fet_id, get_timer(start), loops);
+ else if (loops)
+ debug("%s: FET%d powered on after %lums, loops=%d\n",
+ __func__, fet_id, get_timer(start), loops);
+
+ /*
+ * Unfortunately, there are some conditions where the power
+ * good bit will be 0, but the fet still comes up. One such
+ * case occurs with the lcd backlight. We'll just return 0 here
+ * and assume that the fet will eventually come up.
+ */
+ if (ret == -EAGAIN)
+ ret = 0;
+
+ return ret;
+}
+
+int tps65090_fet_disable(unsigned int fet_id)
+{
+ struct pmic *pmic;
+ int ret;
+
+ ret = tps65090_check_fet(fet_id);
+ if (ret)
+ return ret;
+
+ pmic = pmic_get(TPS65090_NAME);
+ if (!pmic)
+ return -EACCES;
+ ret = tps65090_fet_set(pmic, fet_id, false);
+
+ return ret;
+}
+
+int tps65090_fet_is_enabled(unsigned int fet_id)
+{
+ struct pmic *pmic;
+ u32 reg;
+ int ret;
+
+ ret = tps65090_check_fet(fet_id);
+ if (ret)
+ return ret;
+
+ pmic = pmic_get(TPS65090_NAME);
+ if (!pmic)
+ return -ENODEV;
+ ret = pmic_reg_read(pmic, REG_FET1_CTRL + fet_id - 1, &reg);
+ if (ret) {
+ debug("fail to read FET%u_CTRL register over I2C", fet_id);
+ return -EIO;
+ }
+
+ return reg & FET_CTRL_ENFET;
+}
+
+int tps65090_get_charging(void)
+{
+ struct pmic *pmic;
+ u32 val;
+ int ret;
+
+ pmic = pmic_get(TPS65090_NAME);
+ if (!pmic)
+ return -EACCES;
+
+ ret = pmic_reg_read(pmic, REG_CG_CTRL0, &val);
+ if (ret)
+ return ret;
+
+ return !!(val & CG_CTRL0_ENC_MASK);
+}
+
+static int tps65090_charger_state(struct pmic *pmic, int state,
+ int current)
+{
+ u32 val;
+ int ret;
+
+ ret = pmic_reg_read(pmic, REG_CG_CTRL0, &val);
+ if (!ret) {
+ if (state == PMIC_CHARGER_ENABLE)
+ val |= CG_CTRL0_ENC_MASK;
+ else
+ val &= ~CG_CTRL0_ENC_MASK;
+ ret = pmic_reg_write(pmic, REG_CG_CTRL0, val);
+ }
+ if (ret) {
+ debug("%s: Failed to read/write register\n", __func__);
+ return ret;
+ }
+
+ return 0;
+}
+
+int tps65090_get_status(void)
+{
+ struct pmic *pmic;
+ u32 val;
+ int ret;
+
+ pmic = pmic_get(TPS65090_NAME);
+ if (!pmic)
+ return -EACCES;
+
+ ret = pmic_reg_read(pmic, REG_CG_STATUS1, &val);
+ if (ret)
+ return ret;
+
+ return val;
+}
+
+static int tps65090_charger_bat_present(struct pmic *pmic)
+{
+ u32 val;
+ int ret;
+
+ ret = pmic_reg_read(pmic, REG_IRQ1, &val);
+ if (ret)
+ return ret;
+
+ return !!(val & IRQ1_VBATG);
+}
+
+static struct power_chrg power_chrg_pmic_ops = {
+ .chrg_bat_present = tps65090_charger_bat_present,
+ .chrg_state = tps65090_charger_state,
+};
+
+int tps65090_init(void)
+{
+ struct pmic *p;
+ int bus;
+ int addr;
+ const void *blob = gd->fdt_blob;
+ int node, parent;
+
+ node = fdtdec_next_compatible(blob, 0, COMPAT_TI_TPS65090);
+ if (node < 0) {
+ debug("PMIC: No node for PMIC Chip in device tree\n");
+ debug("node = %d\n", node);
+ return -ENODEV;
+ }
+
+ parent = fdt_parent_offset(blob, node);
+ if (parent < 0) {
+ debug("%s: Cannot find node parent\n", __func__);
+ return -EINVAL;
+ }
+
+ bus = i2c_get_bus_num_fdt(parent);
+ if (p->bus < 0) {
+ debug("%s: Cannot find I2C bus\n", __func__);
+ return -ENOENT;
+ }
+ addr = fdtdec_get_int(blob, node, "reg", TPS65090_I2C_ADDR);
+ p = pmic_alloc();
+ if (!p) {
+ printf("%s: POWER allocation error!\n", __func__);
+ return -ENOMEM;
+ }
+
+ p->name = TPS65090_NAME;
+ p->bus = bus;
+ p->interface = PMIC_I2C;
+ p->number_of_regs = TPS65090_NUM_REGS;
+ p->hw.i2c.addr = addr;
+ p->hw.i2c.tx_num = 1;
+ p->chrg = &power_chrg_pmic_ops;
+
+ puts("TPS65090 PMIC init\n");
+
+ return 0;
+}
diff --git a/drivers/power/power_fsl.c b/drivers/power/power_fsl.c
index ac0b541..a64161b 100644
--- a/drivers/power/power_fsl.c
+++ b/drivers/power/power_fsl.c
@@ -11,9 +11,9 @@
#include <fsl_pmic.h>
#include <errno.h>
-#if defined(CONFIG_PMIC_FSL_MC13892)
+#if defined(CONFIG_POWER_FSL_MC13892)
#define FSL_PMIC_I2C_LENGTH 3
-#elif defined(CONFIG_PMIC_FSL_MC34704)
+#elif defined(CONFIG_POWER_FSL_MC34704)
#define FSL_PMIC_I2C_LENGTH 1
#endif
@@ -51,7 +51,7 @@ int pmic_init(unsigned char bus)
p->hw.i2c.addr = CONFIG_SYS_FSL_PMIC_I2C_ADDR;
p->hw.i2c.tx_num = FSL_PMIC_I2C_LENGTH;
#else
-#error "You must select CONFIG_POWER_SPI or CONFIG_PMIC_I2C"
+#error "You must select CONFIG_POWER_SPI or CONFIG_POWER_I2C"
#endif
return 0;
diff --git a/drivers/power/power_i2c.c b/drivers/power/power_i2c.c
index ac76870..594cd11 100644
--- a/drivers/power/power_i2c.c
+++ b/drivers/power/power_i2c.c
@@ -23,6 +23,8 @@ int pmic_reg_write(struct pmic *p, u32 reg, u32 val)
if (check_reg(p, reg))
return -1;
+ I2C_SET_BUS(p->bus);
+
switch (pmic_i2c_tx_num) {
case 3:
if (p->sensor_byte_order == PMIC_SENSOR_BYTE_ORDER_BIG) {
@@ -66,6 +68,8 @@ int pmic_reg_read(struct pmic *p, u32 reg, u32 *val)
if (check_reg(p, reg))
return -1;
+ I2C_SET_BUS(p->bus);
+
if (i2c_read(pmic_i2c_addr, reg, 1, buf, pmic_i2c_tx_num))
return -1;
diff --git a/include/configs/arndale.h b/include/configs/arndale.h
index 515facf..30ecd45 100644
--- a/include/configs/arndale.h
+++ b/include/configs/arndale.h
@@ -224,8 +224,8 @@
/* PMIC */
#define CONFIG_PMIC
-#define CONFIG_PMIC_I2C
-#define CONFIG_PMIC_MAX77686
+#define CONFIG_POWER_I2C
+#define CONFIG_POWER_MAX77686
#define CONFIG_DEFAULT_DEVICE_TREE exynos5250-arndale
diff --git a/include/configs/exynos4-dt.h b/include/configs/exynos4-dt.h
index cbd2d20..44e6ab4 100644
--- a/include/configs/exynos4-dt.h
+++ b/include/configs/exynos4-dt.h
@@ -20,6 +20,7 @@
#define CONFIG_DISPLAY_CPUINFO
#define CONFIG_DISPLAY_BOARDINFO
#define CONFIG_BOARD_COMMON
+#define CONFIG_SYS_GENERIC_BOARD
/* Enable fdt support */
#define CONFIG_OF_CONTROL
@@ -44,6 +45,9 @@
#define CONFIG_S5P_SDHCI
#define CONFIG_SDHCI
#define CONFIG_MMC_SDMA
+#define CONFIG_DWMMC
+#define CONFIG_EXYNOS_DWMMC
+#define CONFIG_BOUNCE_BUFFER
#define CONFIG_MMC_DEFAULT_DEV 0
/* PWM */
diff --git a/include/configs/exynos5-dt.h b/include/configs/exynos5-dt.h
index 5a9b1b4..b830495 100644
--- a/include/configs/exynos5-dt.h
+++ b/include/configs/exynos5-dt.h
@@ -259,6 +259,7 @@
/* PMIC */
#define CONFIG_POWER
#define CONFIG_POWER_I2C
+#define CONFIG_POWER_TPS65090
/* Ethernet Controllor Driver */
#ifdef CONFIG_CMD_NET
diff --git a/include/configs/exynos5250-dt.h b/include/configs/exynos5250-dt.h
index b7ff472..9d1d56a 100644
--- a/include/configs/exynos5250-dt.h
+++ b/include/configs/exynos5250-dt.h
@@ -45,7 +45,7 @@
#define CONFIG_SYS_INIT_SP_ADDR CONFIG_IRAM_STACK
/* PMIC */
-#define CONFIG_PMIC_MAX77686
+#define CONFIG_POWER_MAX77686
/* Sound */
#define CONFIG_CMD_SOUND
diff --git a/include/configs/mx25pdk.h b/include/configs/mx25pdk.h
index aff2419..d464ad9 100644
--- a/include/configs/mx25pdk.h
+++ b/include/configs/mx25pdk.h
@@ -107,7 +107,7 @@
#define CONFIG_POWER
#define CONFIG_POWER_I2C
#define CONFIG_POWER_FSL
-#define CONFIG_PMIC_FSL_MC34704
+#define CONFIG_POWER_FSL_MC34704
#define CONFIG_SYS_FSL_PMIC_I2C_ADDR 0x54
#define CONFIG_DOS_PARTITION
diff --git a/include/configs/mx35pdk.h b/include/configs/mx35pdk.h
index 0a46f4c..ab48144 100644
--- a/include/configs/mx35pdk.h
+++ b/include/configs/mx35pdk.h
@@ -52,7 +52,7 @@
#define CONFIG_POWER
#define CONFIG_POWER_I2C
#define CONFIG_POWER_FSL
-#define CONFIG_PMIC_FSL_MC13892
+#define CONFIG_POWER_FSL_MC13892
#define CONFIG_SYS_FSL_PMIC_I2C_ADDR 0x08
#define CONFIG_RTC_MC13XXX
diff --git a/include/configs/mx53evk.h b/include/configs/mx53evk.h
index 5bbae8c..fb2072d 100644
--- a/include/configs/mx53evk.h
+++ b/include/configs/mx53evk.h
@@ -47,7 +47,7 @@
#define CONFIG_POWER_I2C
#define CONFIG_POWER_FSL
#define CONFIG_SYS_FSL_PMIC_I2C_ADDR 8
-#define CONFIG_PMIC_FSL_MC13892
+#define CONFIG_POWER_FSL_MC13892
#define CONFIG_RTC_MC13XXX
/* MMC Configs */
diff --git a/include/configs/mx53loco.h b/include/configs/mx53loco.h
index 12d79b4..a74508c 100644
--- a/include/configs/mx53loco.h
+++ b/include/configs/mx53loco.h
@@ -82,7 +82,7 @@
#define CONFIG_POWER_I2C
#define CONFIG_DIALOG_POWER
#define CONFIG_POWER_FSL
-#define CONFIG_PMIC_FSL_MC13892
+#define CONFIG_POWER_FSL_MC13892
#define CONFIG_SYS_DIALOG_PMIC_I2C_ADDR 0x48
#define CONFIG_SYS_FSL_PMIC_I2C_ADDR 0x8
diff --git a/include/configs/s5p_goni.h b/include/configs/s5p_goni.h
index 799d4fe..fce1716 100644
--- a/include/configs/s5p_goni.h
+++ b/include/configs/s5p_goni.h
@@ -17,6 +17,7 @@
#define CONFIG_S5PC110 1 /* which is in a S5PC110 */
#define CONFIG_MACH_GONI 1 /* working with Goni */
+#include <linux/sizes.h>
#include <asm/arch/cpu.h> /* get chip and board defs */
#define CONFIG_ARCH_CPU_INIT
@@ -38,11 +39,9 @@
#define CONFIG_INITRD_TAG
#define CONFIG_CMDLINE_EDITING
-/*
- * Size of malloc() pool
- * 1MB = 0x100000, 0x100000 = 1024 * 1024
- */
-#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (1 << 20))
+/* Size of malloc() pool.*/
+#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 80 * SZ_1M)
+
/*
* select serial console configuration
*/
@@ -72,14 +71,19 @@
#define CONFIG_CMD_CACHE
#define CONFIG_CMD_REGINFO
#define CONFIG_CMD_ONENAND
-#define CONFIG_CMD_MTDPARTS
#define CONFIG_CMD_MMC
+#define CONFIG_CMD_DFU
+#define CONFIG_CMD_GPT
-#define CONFIG_BOOTDELAY 1
-#define CONFIG_ZERO_BOOTDELAY_CHECK
+/* USB Composite download gadget - g_dnl */
+#define CONFIG_USBDOWNLOAD_GADGET
+#define CONFIG_DFU_FUNCTION
+#define CONFIG_DFU_MMC
-#define CONFIG_MTD_DEVICE
-#define CONFIG_MTD_PARTITIONS
+/* USB Samsung's IDs */
+#define CONFIG_G_DNL_VENDOR_NUM 0x04E8
+#define CONFIG_G_DNL_PRODUCT_NUM 0x6601
+#define CONFIG_G_DNL_MANUFACTURER "Samsung"
/* Actual modem binary size is 16MiB. Add 2MiB for bad block handling */
#define MTDIDS_DEFAULT "onenand0=samsung-onenand"
@@ -90,30 +94,52 @@
",7m(kernel)"\
",1m(log)"\
",12m(modem)"\
- ",60m(qboot)"\
- ",-(UBI)\0"
+ ",60m(qboot)\0"
-#define NORMAL_MTDPARTS_DEFAULT MTDPARTS_DEFAULT
+#define CONFIG_BOOTDELAY 1
+#define CONFIG_ZERO_BOOTDELAY_CHECK
-#define CONFIG_BOOTCOMMAND "run ubifsboot"
+/* partitions definitions */
+#define PARTS_CSA "csa-mmc"
+#define PARTS_BOOTLOADER "u-boot"
+#define PARTS_BOOT "boot"
+#define PARTS_ROOT "platform"
+#define PARTS_DATA "data"
+#define PARTS_CSC "csc"
+#define PARTS_UMS "ums"
+
+#define CONFIG_DFU_ALT \
+ "u-boot raw 0x80 0x400;" \
+ "uImage ext4 0 2;" \
+ "exynos3-goni.dtb ext4 0 2;" \
+ ""PARTS_ROOT" part 0 5\0"
+
+#define PARTS_DEFAULT \
+ "uuid_disk=${uuid_gpt_disk};" \
+ "name="PARTS_CSA",size=8MiB,uuid=${uuid_gpt_"PARTS_CSA"};" \
+ "name="PARTS_BOOTLOADER",size=60MiB," \
+ "uuid=${uuid_gpt_"PARTS_BOOTLOADER"};" \
+ "name="PARTS_BOOT",size=100MiB,uuid=${uuid_gpt_"PARTS_BOOT"};" \
+ "name="PARTS_ROOT",size=1GiB,uuid=${uuid_gpt_"PARTS_ROOT"};" \
+ "name="PARTS_DATA",size=3GiB,uuid=${uuid_gpt_"PARTS_DATA"};" \
+ "name="PARTS_CSC",size=150MiB,uuid=${uuid_gpt_"PARTS_CSC"};" \
+ "name="PARTS_UMS",size=-,uuid=${uuid_gpt_"PARTS_UMS"}\0" \
+
+#define CONFIG_BOOTCOMMAND "run mmcboot"
#define CONFIG_DEFAULT_CONSOLE "console=ttySAC2,115200n8\0"
-#define CONFIG_RAMDISK_BOOT "root=/dev/ram0 rw rootfstype=ext2" \
+#define CONFIG_RAMDISK_BOOT "root=/dev/ram0 rw rootfstype=ext4" \
" ${console} ${meminfo}"
#define CONFIG_COMMON_BOOT "${console} ${meminfo} ${mtdparts}"
-#define CONFIG_BOOTARGS "root=/dev/mtdblock8 ubi.mtd=8 ubi.mtd=3 ubi.mtd=6" \
- " rootfstype=cramfs " CONFIG_COMMON_BOOT
+#define CONFIG_BOOTARGS "root=/dev/mtdblock8 rootfstype=ext4 " \
+ CONFIG_COMMON_BOOT
#define CONFIG_UPDATEB "updateb=onenand erase 0x0 0x100000;" \
" onenand write 0x32008000 0x0 0x100000\0"
-#define CONFIG_UBI_MTD " ubi.mtd=${ubiblock} ubi.mtd=3 ubi.mtd=6"
-
-#define CONFIG_UBIFS_OPTION "rootflags=bulk_read,no_chk_data_crc"
-
#define CONFIG_MISC_COMMON
#define CONFIG_MISC_INIT_R
@@ -130,42 +156,44 @@
"onenand erase 0x01560000 0x1eaa0000;" \
"onenand write 0x32000000 0x1260000 0x8C0000\0" \
"bootk=" \
- "onenand read 0x30007FC0 0xc00000 0x600000;" \
+ "run loaduimage;" \
"bootm 0x30007FC0\0" \
"flashboot=" \
"set bootargs root=/dev/mtdblock${bootblock} " \
- "rootfstype=${rootfstype}" CONFIG_UBI_MTD " ${opts} " \
+ "rootfstype=${rootfstype} ${opts} " \
"${lcdinfo} " CONFIG_COMMON_BOOT "; run bootk\0" \
"ubifsboot=" \
"set bootargs root=ubi0!rootfs rootfstype=ubifs " \
- CONFIG_UBIFS_OPTION CONFIG_UBI_MTD " ${opts} ${lcdinfo} " \
+ "${opts} ${lcdinfo} " \
CONFIG_COMMON_BOOT "; run bootk\0" \
"tftpboot=" \
"set bootargs root=ubi0!rootfs rootfstype=ubifs " \
- CONFIG_UBIFS_OPTION CONFIG_UBI_MTD " ${opts} ${lcdinfo} " \
- CONFIG_COMMON_BOOT "; tftp 0x30007FC0 uImage; " \
- "bootm 0x30007FC0\0" \
+ "${opts} ${lcdinfo} " CONFIG_COMMON_BOOT \
+ "; tftp 0x30007FC0 uImage; bootm 0x30007FC0\0" \
"ramboot=" \
"set bootargs " CONFIG_RAMDISK_BOOT \
- " initrd=0x33000000,8M ramdisk=8192\0" \
+ "initrd=0x33000000,8M ramdisk=8192\0" \
"mmcboot=" \
- "set bootargs root=${mmcblk} rootfstype=${rootfstype}" \
- CONFIG_UBI_MTD " ${opts} ${lcdinfo} " \
+ "set bootargs root=/dev/mmcblk${mmcdev}p${mmcrootpart} " \
+ "rootfstype=${rootfstype} ${opts} ${lcdinfo} " \
CONFIG_COMMON_BOOT "; run bootk\0" \
"boottrace=setenv opts initcall_debug; run bootcmd\0" \
"bootchart=set opts init=/sbin/bootchartd; run bootcmd\0" \
"verify=n\0" \
- "rootfstype=cramfs\0" \
+ "rootfstype=ext4\0" \
"console=" CONFIG_DEFAULT_CONSOLE \
- "mtdparts=" MTDPARTS_DEFAULT \
"meminfo=mem=80M mem=256M@0x40000000 mem=128M@0x50000000\0" \
- "mmcblk=/dev/mmcblk1p1\0" \
+ "loaduimage=ext4load mmc ${mmcdev}:${mmcbootpart} 0x30007FC0 uImage\0" \
+ "mmcdev=0\0" \
+ "mmcbootpart=2\0" \
+ "mmcrootpart=5\0" \
+ "partitions=" PARTS_DEFAULT \
"bootblock=9\0" \
"ubiblock=8\0" \
"ubi=enabled\0" \
- "opts=always_resume=1"
+ "opts=always_resume=1\0" \
+ "dfu_alt_info=" CONFIG_DFU_ALT "\0"
-/* Miscellaneous configurable options */
#define CONFIG_SYS_LONGHELP /* undef to save memory */
#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */
#define CONFIG_SYS_PROMPT "Goni # "
@@ -202,6 +230,18 @@
#define CONFIG_DOS_PARTITION 1
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_EXT4
+#define CONFIG_CMD_EXT4_WRITE
+
+/* write support for filesystems */
+#define CONFIG_FAT_WRITE
+#define CONFIG_EXT4_WRITE
+
+/* GPT */
+#define CONFIG_EFI_PARTITION
+#define CONFIG_PARTITION_UUIDS
+
#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_LOAD_ADDR - 0x1000000)
#define CONFIG_SYS_CACHELINE_SIZE 64
@@ -226,5 +266,8 @@
#define CONFIG_USB_GADGET
#define CONFIG_USB_GADGET_S3C_UDC_OTG
#define CONFIG_USB_GADGET_DUALSPEED
+#define CONFIG_USB_GADGET_VBUS_DRAW 2
+#define CONFIG_CMD_USB_MASS_STORAGE
+#define CONFIG_USB_GADGET_MASS_STORAGE
#endif /* __CONFIG_H */
diff --git a/include/configs/woodburn_common.h b/include/configs/woodburn_common.h
index 695bc23..259205e 100644
--- a/include/configs/woodburn_common.h
+++ b/include/configs/woodburn_common.h
@@ -55,7 +55,7 @@
#define CONFIG_POWER
#define CONFIG_POWER_I2C
#define CONFIG_POWER_FSL
-#define CONFIG_PMIC_FSL_MC13892
+#define CONFIG_POWER_FSL_MC13892
#define CONFIG_SYS_FSL_PMIC_I2C_ADDR 0x8
#define CONFIG_RTC_MC13XXX
diff --git a/include/dwmmc.h b/include/dwmmc.h
index c9bdf51..b67f11b 100644
--- a/include/dwmmc.h
+++ b/include/dwmmc.h
@@ -123,6 +123,9 @@
#define DWMCI_BMOD_IDMAC_FB (1 << 1)
#define DWMCI_BMOD_IDMAC_EN (1 << 7)
+/* UHS register */
+#define DWMCI_DDR_MODE (1 << 16)
+
/* quirks */
#define DWMCI_QUIRK_DISABLE_SMU (1 << 0)
@@ -134,7 +137,9 @@ struct dwmci_host {
unsigned int version;
unsigned int clock;
unsigned int bus_hz;
+ unsigned int div;
int dev_index;
+ int dev_id;
int buswidth;
u32 clksel_val;
u32 fifoth_val;
diff --git a/include/fdtdec.h b/include/fdtdec.h
index 3196cf6..a7e6ee7 100644
--- a/include/fdtdec.h
+++ b/include/fdtdec.h
@@ -81,7 +81,7 @@ enum fdt_compat_id {
COMPAT_SAMSUNG_EXYNOS_FIMD, /* Exynos Display controller */
COMPAT_SAMSUNG_EXYNOS_MIPI_DSI, /* Exynos mipi dsi */
COMPAT_SAMSUNG_EXYNOS5_DP, /* Exynos Display port controller */
- COMPAT_SAMSUNG_EXYNOS5_DWMMC, /* Exynos5 DWMMC controller */
+ COMPAT_SAMSUNG_EXYNOS_DWMMC, /* Exynos DWMMC controller */
COMPAT_SAMSUNG_EXYNOS_MMC, /* Exynos MMC controller */
COMPAT_SAMSUNG_EXYNOS_SERIAL, /* Exynos UART */
COMPAT_MAXIM_MAX77686_PMIC, /* MAX77686 PMIC */
@@ -92,6 +92,8 @@ enum fdt_compat_id {
COMPAT_SAMSUNG_EXYNOS5_I2C, /* Exynos5 High Speed I2C Controller */
COMPAT_SANDBOX_HOST_EMULATION, /* Sandbox emulation of a function */
COMPAT_SANDBOX_LCD_SDL, /* Sandbox LCD emulation with SDL */
+ COMPAT_TI_TPS65090, /* Texas Instrument TPS65090 */
+ COMPAT_NXP_PTN3460, /* NXP PTN3460 DP/LVDS bridge */
COMPAT_COUNT,
};
diff --git a/include/initcall.h b/include/initcall.h
index 2378077..65f67dc 100644
--- a/include/initcall.h
+++ b/include/initcall.h
@@ -6,4 +6,4 @@
typedef int (*init_fnc_t)(void);
-int initcall_run_list(init_fnc_t init_sequence[]);
+int initcall_run_list(const init_fnc_t init_sequence[]);
diff --git a/include/mmc.h b/include/mmc.h
index a3a100b..f46572e 100644
--- a/include/mmc.h
+++ b/include/mmc.h
@@ -32,15 +32,13 @@
#define MMC_VERSION_4_41 (MMC_VERSION_MMC | 0x429)
#define MMC_VERSION_4_5 (MMC_VERSION_MMC | 0x405)
-#define MMC_MODE_HS 0x001
-#define MMC_MODE_HS_52MHz 0x010
-#define MMC_MODE_4BIT 0x100
-#define MMC_MODE_8BIT 0x200
-#define MMC_MODE_SPI 0x400
-#define MMC_MODE_HC 0x800
-
-#define MMC_MODE_MASK_WIDTH_BITS (MMC_MODE_4BIT | MMC_MODE_8BIT)
-#define MMC_MODE_WIDTH_BITS_SHIFT 8
+#define MMC_MODE_HS (1 << 0)
+#define MMC_MODE_HS_52MHz (1 << 1)
+#define MMC_MODE_4BIT (1 << 2)
+#define MMC_MODE_8BIT (1 << 3)
+#define MMC_MODE_SPI (1 << 4)
+#define MMC_MODE_HC (1 << 5)
+#define MMC_MODE_DDR_52MHz (1 << 6)
#define SD_DATA_4BIT 0x00040000
@@ -100,9 +98,6 @@
#define SD_HIGHSPEED_BUSY 0x00020000
#define SD_HIGHSPEED_SUPPORTED 0x00020000
-#define MMC_HS_TIMING 0x00000100
-#define MMC_HS_52MHZ 0x2
-
#define OCR_BUSY 0x80000000
#define OCR_HCS 0x40000000
#define OCR_VOLTAGE_MASK 0x007FFF80
@@ -178,10 +173,16 @@
#define EXT_CSD_CARD_TYPE_26 (1 << 0) /* Card can run at 26MHz */
#define EXT_CSD_CARD_TYPE_52 (1 << 1) /* Card can run at 52MHz */
+#define EXT_CSD_CARD_TYPE_DDR_1_8V (1 << 2)
+#define EXT_CSD_CARD_TYPE_DDR_1_2V (1 << 3)
+#define EXT_CSD_CARD_TYPE_DDR_52 (EXT_CSD_CARD_TYPE_DDR_1_8V \
+ | EXT_CSD_CARD_TYPE_DDR_1_2V)
#define EXT_CSD_BUS_WIDTH_1 0 /* Card is in 1 bit mode */
#define EXT_CSD_BUS_WIDTH_4 1 /* Card is in 4 bit mode */
#define EXT_CSD_BUS_WIDTH_8 2 /* Card is in 8 bit mode */
+#define EXT_CSD_DDR_BUS_WIDTH_4 5 /* Card is in 4 bit DDR mode */
+#define EXT_CSD_DDR_BUS_WIDTH_8 6 /* Card is in 8 bit DDR mode */
#define EXT_CSD_BOOT_ACK_ENABLE (1 << 6)
#define EXT_CSD_BOOT_PARTITION_ENABLE (1 << 3)
diff --git a/include/power/max77693_pmic.h b/include/power/max77693_pmic.h
index 616d051..3d59e59 100644
--- a/include/power/max77693_pmic.h
+++ b/include/power/max77693_pmic.h
@@ -10,8 +10,6 @@
#include <power/power_chrg.h>
-enum {CHARGER_ENABLE, CHARGER_DISABLE};
-
#define CHARGER_MIN_CURRENT 200
#define CHARGER_MAX_CURRENT 2000
diff --git a/include/power/max8997_pmic.h b/include/power/max8997_pmic.h
index 74c5d54..728d60a 100644
--- a/include/power/max8997_pmic.h
+++ b/include/power/max8997_pmic.h
@@ -170,7 +170,6 @@ enum {
#define SAFEOUT_3_30V 0x03
/* Charger */
-enum {CHARGER_ENABLE, CHARGER_DISABLE};
#define DETBAT (1 << 2)
#define MBCICHFCSET (1 << 4)
#define MBCHOSTEN (1 << 6)
diff --git a/include/power/pmic.h b/include/power/pmic.h
index 8f282dd..a62e6c9 100644
--- a/include/power/pmic.h
+++ b/include/power/pmic.h
@@ -17,6 +17,11 @@ enum { I2C_PMIC, I2C_NUM, };
enum { PMIC_READ, PMIC_WRITE, };
enum { PMIC_SENSOR_BYTE_ORDER_LITTLE, PMIC_SENSOR_BYTE_ORDER_BIG, };
+enum {
+ PMIC_CHARGER_DISABLE,
+ PMIC_CHARGER_ENABLE,
+};
+
struct p_i2c {
unsigned char addr;
unsigned char *buf;
diff --git a/include/power/tps65090_pmic.h b/include/power/tps65090_pmic.h
new file mode 100644
index 0000000..dcf99c9
--- /dev/null
+++ b/include/power/tps65090_pmic.h
@@ -0,0 +1,73 @@
+/*
+ * Copyright (c) 2012 The Chromium OS Authors.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __TPS65090_PMIC_H_
+#define __TPS65090_PMIC_H_
+
+/* I2C device address for TPS65090 PMU */
+#define TPS65090_I2C_ADDR 0x48
+
+enum {
+ /* Status register fields */
+ TPS65090_ST1_OTC = 1 << 0,
+ TPS65090_ST1_OCC = 1 << 1,
+ TPS65090_ST1_STATE_SHIFT = 4,
+ TPS65090_ST1_STATE_MASK = 0xf << TPS65090_ST1_STATE_SHIFT,
+};
+
+/**
+ * Enable FET
+ *
+ * @param fet_id FET ID, value between 1 and 7
+ * @return 0 on success, non-0 on failure
+ */
+int tps65090_fet_enable(unsigned int fet_id);
+
+/**
+ * Disable FET
+ *
+ * @param fet_id FET ID, value between 1 and 7
+ * @return 0 on success, non-0 on failure
+ */
+int tps65090_fet_disable(unsigned int fet_id);
+
+/**
+ * Is FET enabled?
+ *
+ * @param fet_id FET ID, value between 1 and 7
+ * @return 1 enabled, 0 disabled, negative value on failure
+ */
+int tps65090_fet_is_enabled(unsigned int fet_id);
+
+/**
+ * Enable / disable the battery charger
+ *
+ * @param enable 0 to disable charging, non-zero to enable
+ */
+int tps65090_set_charge_enable(int enable);
+
+/**
+ * Check whether we have enabled battery charging
+ *
+ * @return 1 if enabled, 0 if disabled
+ */
+int tps65090_get_charging(void);
+
+/**
+ * Return the value of the status register
+ *
+ * @return status register value, or -1 on error
+ */
+int tps65090_get_status(void);
+
+/**
+ * Initialize the TPS65090 PMU.
+ *
+ * @return 0 on success, non-0 on failure
+ */
+int tps65090_init(void);
+
+#endif /* __TPS65090_PMIC_H_ */
diff --git a/lib/fdtdec.c b/lib/fdtdec.c
index 8ecb80f..13d3d2f 100644
--- a/lib/fdtdec.c
+++ b/lib/fdtdec.c
@@ -55,7 +55,7 @@ static const char * const compat_names[COMPAT_COUNT] = {
COMPAT(SAMSUNG_EXYNOS_FIMD, "samsung,exynos-fimd"),
COMPAT(SAMSUNG_EXYNOS_MIPI_DSI, "samsung,exynos-mipi-dsi"),
COMPAT(SAMSUNG_EXYNOS5_DP, "samsung,exynos5-dp"),
- COMPAT(SAMSUNG_EXYNOS5_DWMMC, "samsung,exynos5250-dwmmc"),
+ COMPAT(SAMSUNG_EXYNOS_DWMMC, "samsung,exynos-dwmmc"),
COMPAT(SAMSUNG_EXYNOS_MMC, "samsung,exynos-mmc"),
COMPAT(SAMSUNG_EXYNOS_SERIAL, "samsung,exynos4210-uart"),
COMPAT(MAXIM_MAX77686_PMIC, "maxim,max77686_pmic"),
@@ -66,6 +66,8 @@ static const char * const compat_names[COMPAT_COUNT] = {
COMPAT(SAMSUNG_EXYNOS5_I2C, "samsung,exynos5-hsi2c"),
COMPAT(SANDBOX_HOST_EMULATION, "sandbox,host-emulation"),
COMPAT(SANDBOX_LCD_SDL, "sandbox,lcd-sdl"),
+ COMPAT(TI_TPS65090, "ti,tps65090"),
+ COMPAT(COMPAT_NXP_PTN3460, "nxp,ptn3460"),
};
const char *fdtdec_get_compatible(enum fdt_compat_id id)
diff --git a/lib/initcall.c b/lib/initcall.c
index fa76dd7..7597bad 100644
--- a/lib/initcall.c
+++ b/lib/initcall.c
@@ -7,15 +7,22 @@
#include <common.h>
#include <initcall.h>
-int initcall_run_list(init_fnc_t init_sequence[])
+DECLARE_GLOBAL_DATA_PTR;
+
+int initcall_run_list(const init_fnc_t init_sequence[])
{
- init_fnc_t *init_fnc_ptr;
+ const init_fnc_t *init_fnc_ptr;
for (init_fnc_ptr = init_sequence; *init_fnc_ptr; ++init_fnc_ptr) {
- debug("initcall: %p\n", *init_fnc_ptr);
+ unsigned long reloc_ofs = 0;
+
+ if (gd->flags & GD_FLG_RELOC)
+ reloc_ofs = gd->reloc_off;
+ debug("initcall: %p\n", (char *)*init_fnc_ptr - reloc_ofs);
if ((*init_fnc_ptr)()) {
- debug("initcall sequence %p failed at call %p\n",
- init_sequence, *init_fnc_ptr);
+ printf("initcall sequence %p failed at call %p\n",
+ init_sequence,
+ (char *)*init_fnc_ptr - reloc_ofs);
return -1;
}
}