summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorEric Nelson <eric.nelson@boundarydevices.com>2012-01-31 10:52:07 -0700
committerMike Frysinger <vapier@gentoo.org>2012-02-12 15:18:29 -0500
commitc1173bd0754aa55bc52d874d5490c0c892a56ebf (patch)
tree71d8705c113e9cd895d633ec54946e014532b2d0
parent8b463dab933f3bb1e4ec703a9e3cbfca2f031334 (diff)
downloadu-boot-imx-c1173bd0754aa55bc52d874d5490c0c892a56ebf.zip
u-boot-imx-c1173bd0754aa55bc52d874d5490c0c892a56ebf.tar.gz
u-boot-imx-c1173bd0754aa55bc52d874d5490c0c892a56ebf.tar.bz2
sf command: allow default bus and chip selects
This patch allows a board configuration file to provide default bus and chip-selects for SPI flash so that first argument to the 'sf' command is optional. On boards that use the mxc_spi driver and a GPIO for chip select, this allows a much simpler command line: U-Boot> sf probe instead of U-Boot> sf probe 0x5300 Tested-by: Jason Liu <jason.hui@linaro.org> Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
-rw-r--r--common/cmd_sf.c37
1 files changed, 21 insertions, 16 deletions
diff --git a/common/cmd_sf.c b/common/cmd_sf.c
index 612fd18..98e4162 100644
--- a/common/cmd_sf.c
+++ b/common/cmd_sf.c
@@ -17,6 +17,12 @@
#ifndef CONFIG_SF_DEFAULT_MODE
# define CONFIG_SF_DEFAULT_MODE SPI_MODE_3
#endif
+#ifndef CONFIG_SF_DEFAULT_CS
+# define CONFIG_SF_DEFAULT_CS 0
+#endif
+#ifndef CONFIG_SF_DEFAULT_BUS
+# define CONFIG_SF_DEFAULT_BUS 0
+#endif
static struct spi_flash *flash;
@@ -63,27 +69,26 @@ static int sf_parse_len_arg(char *arg, ulong *len)
static int do_spi_flash_probe(int argc, char * const argv[])
{
- unsigned int bus = 0;
- unsigned int cs;
+ unsigned int bus = CONFIG_SF_DEFAULT_BUS;
+ unsigned int cs = CONFIG_SF_DEFAULT_CS;
unsigned int speed = CONFIG_SF_DEFAULT_SPEED;
unsigned int mode = CONFIG_SF_DEFAULT_MODE;
char *endp;
struct spi_flash *new;
- if (argc < 2)
- return -1;
-
- cs = simple_strtoul(argv[1], &endp, 0);
- if (*argv[1] == 0 || (*endp != 0 && *endp != ':'))
- return -1;
- if (*endp == ':') {
- if (endp[1] == 0)
- return -1;
-
- bus = cs;
- cs = simple_strtoul(endp + 1, &endp, 0);
- if (*endp != 0)
+ if (argc >= 2) {
+ cs = simple_strtoul(argv[1], &endp, 0);
+ if (*argv[1] == 0 || (*endp != 0 && *endp != ':'))
return -1;
+ if (*endp == ':') {
+ if (endp[1] == 0)
+ return -1;
+
+ bus = cs;
+ cs = simple_strtoul(endp + 1, &endp, 0);
+ if (*endp != 0)
+ return -1;
+ }
}
if (argc >= 3) {
@@ -299,7 +304,7 @@ usage:
U_BOOT_CMD(
sf, 5, 1, do_spi_flash,
"SPI flash sub-system",
- "probe [bus:]cs [hz] [mode] - init flash device on given SPI bus\n"
+ "probe [[bus:]cs] [hz] [mode] - init flash device on given SPI bus\n"
" and chip select\n"
"sf read addr offset len - read `len' bytes starting at\n"
" `offset' to memory at `addr'\n"