summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorWolfgang Denk <wd@denx.de>2009-05-24 17:06:54 +0200
committerWolfgang Denk <wd@denx.de>2009-06-12 20:47:16 +0200
commita89c33db96a1e55319a286dd4c3c05ca64ac6bfd (patch)
tree512938dbd159b7262aad30e4304cfc05c350226c
parent94796d8544d4248028141bad11c6a74b840e9d6e (diff)
downloadu-boot-imx-a89c33db96a1e55319a286dd4c3c05ca64ac6bfd.zip
u-boot-imx-a89c33db96a1e55319a286dd4c3c05ca64ac6bfd.tar.gz
u-boot-imx-a89c33db96a1e55319a286dd4c3c05ca64ac6bfd.tar.bz2
General help message cleanup
Many of the help messages were not really helpful; for example, many commands that take no arguments would not print a correct synopsis line, but "No additional help available." which is not exactly wrong, but not helpful either. Commit ``Make "usage" messages more helpful.'' changed this partially. But it also became clear that lots of "Usage" and "Help" messages (fields "usage" and "help" in struct cmd_tbl_s respective) were actually redundant. This patch cleans this up - for example: Before: => help dtt dtt - Digital Thermometer and Thermostat Usage: dtt - Read temperature from digital thermometer and thermostat. After: => help dtt dtt - Read temperature from Digital Thermometer and Thermostat Usage: dtt Signed-off-by: Wolfgang Denk <wd@denx.de>
-rw-r--r--board/BuS/EB+MCF-EV123/EB+MCF-EV123.c2
-rw-r--r--board/ads5121/ads5121_diu.c2
-rw-r--r--board/amcc/acadia/cmd_acadia.c4
-rw-r--r--board/amcc/canyonlands/bootstrap.c4
-rw-r--r--board/amcc/katmai/cmd_katmai.c4
-rw-r--r--board/amcc/kilauea/cmd_pll.c4
-rw-r--r--board/amcc/luan/luan.c4
-rw-r--r--board/amcc/makalu/cmd_pll.c4
-rw-r--r--board/amcc/sequoia/cmd_sequoia.c4
-rw-r--r--board/amcc/taihu/lcd.c16
-rw-r--r--board/amcc/taihu/taihu.c8
-rw-r--r--board/amcc/taihu/update.c4
-rw-r--r--board/amcc/taishan/lcd.c14
-rw-r--r--board/amcc/taishan/showinfo.c6
-rw-r--r--board/amcc/taishan/update.c2
-rw-r--r--board/amcc/yucca/cmd_yucca.c2
-rw-r--r--board/amirix/ap1000/ap1000.c10
-rw-r--r--board/amirix/ap1000/powerspan.c2
-rw-r--r--board/barco/barco.c6
-rw-r--r--board/bc3450/cmd_bc3450.c23
-rw-r--r--board/bf537-stamp/cmd_bf537led.c4
-rw-r--r--board/cm5200/cmd_cm5200.c2
-rw-r--r--board/delta/delta.c2
-rw-r--r--board/esd/ar405/ar405.c13
-rw-r--r--board/esd/cms700/cms700.c5
-rw-r--r--board/esd/common/auto_update.c2
-rw-r--r--board/esd/common/cmd_loadpci.c4
-rw-r--r--board/esd/common/lcd.c2
-rw-r--r--board/esd/common/xilinx_jtag/micro.c2
-rw-r--r--board/esd/cpci2dp/cpci2dp.c4
-rw-r--r--board/esd/cpci405/cpci405.c12
-rw-r--r--board/esd/cpci5200/cpci5200.c4
-rw-r--r--board/esd/cpci750/cpci750.c4
-rw-r--r--board/esd/dasa_sim/cmd_dasa_sim.c2
-rw-r--r--board/esd/du440/du440.c33
-rw-r--r--board/esd/hh405/hh405.c5
-rw-r--r--board/esd/ocrtc/cmd_ocrtc.c4
-rw-r--r--board/esd/pci405/cmd_pci405.c2
-rw-r--r--board/esd/pci405/pci405.c4
-rw-r--r--board/esd/pf5200/pf5200.c10
-rw-r--r--board/esd/plu405/plu405.c5
-rw-r--r--board/esd/pmc440/cmd_pmc440.c35
-rw-r--r--board/esd/tasreg/tasreg.c24
-rw-r--r--board/esd/voh405/voh405.c5
-rw-r--r--board/evb64260/zuma_pbb.c4
-rw-r--r--board/freescale/common/pixis.c28
-rw-r--r--board/freescale/mpc8610hpcd/mpc8610hpcd_diu.c4
-rw-r--r--board/g2000/g2000.c6
-rw-r--r--board/hymod/bsp.c4
-rw-r--r--board/inka4x0/inkadiag.c10
-rw-r--r--board/keymile/common/keymile_hdlc_enet.c4
-rw-r--r--board/lwmon/lwmon.c6
-rw-r--r--board/lwmon5/kbd.c2
-rw-r--r--board/lwmon5/lwmon5.c2
-rw-r--r--board/micronas/vct/smc_eeprom.c6
-rw-r--r--board/mpl/mip405/cmd_mip405.c2
-rw-r--r--board/mpl/pati/cmd_pati.c2
-rw-r--r--board/mpl/pip405/cmd_pip405.c2
-rw-r--r--board/mpl/vcma9/cmd_vcma9.c2
-rw-r--r--board/pcippc2/pcippc2.c2
-rw-r--r--board/pcs440ep/pcs440ep.c4
-rw-r--r--board/pn62/cmd_pn62.c6
-rw-r--r--board/prodrive/pdnb3/pdnb3.c2
-rw-r--r--board/pxa255_idp/pxa_idp.c2
-rw-r--r--board/r360mpi/r360mpi.c2
-rw-r--r--board/renesas/sh7785lcr/rtl8169_mac.c4
-rw-r--r--board/renesas/sh7785lcr/selfcheck.c2
-rw-r--r--board/renesas/sh7785lcr/sh7785lcr.c2
-rw-r--r--board/sandburst/common/ppc440gx_i2c.c2
-rw-r--r--board/sandburst/karef/karef.c4
-rw-r--r--board/sandburst/metrobox/metrobox.c4
-rw-r--r--board/siemens/common/fpga.c2
-rw-r--r--board/siemens/pcu_e/pcu_e.c8
-rw-r--r--board/ssv/common/cmd_sled.c2
-rw-r--r--board/ssv/common/wd_pio.c2
-rw-r--r--board/tqc/tqm5200/cmd_stk52xx.c13
-rw-r--r--board/tqc/tqm5200/cmd_tb5200.c4
-rw-r--r--board/tqc/tqm8272/tqm8272.c2
-rw-r--r--board/trab/cmd_trab.c12
-rw-r--r--board/trab/trab.c2
-rw-r--r--board/trizepsiv/eeprom.c3
-rw-r--r--board/w7o/cmd_vpd.c2
-rw-r--r--board/zeus/update.c2
-rw-r--r--board/zeus/zeus.c4
-rw-r--r--common/cmd_ambapp.c7
-rw-r--r--common/cmd_bdinfo.c2
-rw-r--r--common/cmd_bedbug.c16
-rw-r--r--common/cmd_bmp.c2
-rw-r--r--common/cmd_boot.c4
-rw-r--r--common/cmd_bootldr.c3
-rw-r--r--common/cmd_bootm.c10
-rw-r--r--common/cmd_cache.c4
-rw-r--r--common/cmd_cplbinfo.c4
-rw-r--r--common/cmd_dataflash_mmc_mux.c2
-rw-r--r--common/cmd_date.c2
-rw-r--r--common/cmd_dcr.c8
-rw-r--r--common/cmd_df.c2
-rw-r--r--common/cmd_diag.c2
-rw-r--r--common/cmd_display.c2
-rw-r--r--common/cmd_doc.c4
-rw-r--r--common/cmd_dtt.c4
-rw-r--r--common/cmd_eeprom.c4
-rw-r--r--common/cmd_elf.c4
-rw-r--r--common/cmd_ext2.c4
-rw-r--r--common/cmd_fat.c6
-rw-r--r--common/cmd_fdc.c2
-rw-r--r--common/cmd_fdos.c4
-rw-r--r--common/cmd_fdt.c2
-rw-r--r--common/cmd_flash.c6
-rw-r--r--common/cmd_fpga.c5
-rw-r--r--common/cmd_i2c.c5
-rw-r--r--common/cmd_ide.c4
-rw-r--r--common/cmd_immap.c33
-rw-r--r--common/cmd_irq.c3
-rw-r--r--common/cmd_itest.c2
-rw-r--r--common/cmd_jffs2.c7
-rw-r--r--common/cmd_license.c5
-rw-r--r--common/cmd_load.c16
-rw-r--r--common/cmd_log.c2
-rw-r--r--common/cmd_mac.c18
-rw-r--r--common/cmd_mem.c37
-rw-r--r--common/cmd_mfsl.c7
-rw-r--r--common/cmd_mgdisk.c2
-rw-r--r--common/cmd_mii.c2
-rw-r--r--common/cmd_misc.c4
-rw-r--r--common/cmd_mmc.c11
-rw-r--r--common/cmd_mp.c7
-rw-r--r--common/cmd_mtdparts.c4
-rw-r--r--common/cmd_nand.c45
-rw-r--r--common/cmd_net.c12
-rw-r--r--common/cmd_nvedit.c10
-rw-r--r--common/cmd_onenand.c2
-rw-r--r--common/cmd_otp.c3
-rw-r--r--common/cmd_pci.c2
-rw-r--r--common/cmd_pcmcia.c4
-rw-r--r--common/cmd_portio.c4
-rw-r--r--common/cmd_reginfo.c1
-rw-r--r--common/cmd_reiser.c4
-rw-r--r--common/cmd_sata.c3
-rw-r--r--common/cmd_scsi.c4
-rw-r--r--common/cmd_setexpr.c2
-rw-r--r--common/cmd_sf.c3
-rw-r--r--common/cmd_source.c7
-rw-r--r--common/cmd_spi.c2
-rw-r--r--common/cmd_strings.c3
-rw-r--r--common/cmd_ubi.c2
-rw-r--r--common/cmd_ubifs.c17
-rw-r--r--common/cmd_universe.c2
-rw-r--r--common/cmd_usb.c6
-rw-r--r--common/cmd_vfd.c2
-rw-r--r--common/cmd_ximg.c11
-rw-r--r--common/cmd_yaffs2.c24
-rw-r--r--common/command.c15
-rw-r--r--common/hush.c2
-rw-r--r--common/lcd.c2
-rw-r--r--cpu/arm_cortexa8/omap3/board.c4
-rw-r--r--cpu/mpc512x/iim.c4
-rw-r--r--cpu/mpc512x/speed.c2
-rw-r--r--cpu/mpc83xx/speed.c2
-rw-r--r--cpu/nios/asmi.c2
-rw-r--r--cpu/nios2/epcs.c2
-rw-r--r--cpu/nios2/sysid.c2
-rw-r--r--drivers/gpio/pca953x.c2
-rw-r--r--drivers/misc/ds4510.c8
-rw-r--r--drivers/qe/qe.c5
165 files changed, 507 insertions, 496 deletions
diff --git a/board/BuS/EB+MCF-EV123/EB+MCF-EV123.c b/board/BuS/EB+MCF-EV123/EB+MCF-EV123.c
index 02a095e..73dfb3d 100644
--- a/board/BuS/EB+MCF-EV123/EB+MCF-EV123.c
+++ b/board/BuS/EB+MCF-EV123/EB+MCF-EV123.c
@@ -156,7 +156,7 @@ int do_vcimage (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
vcimage, 2, 0, do_vcimage,
"loads an image to Display",
- "vcimage addr\n"
+ "vcimage addr"
);
/* EOF EB+MCF-EV123c */
diff --git a/board/ads5121/ads5121_diu.c b/board/ads5121/ads5121_diu.c
index 41a1353..1dd60af 100644
--- a/board/ads5121/ads5121_diu.c
+++ b/board/ads5121/ads5121_diu.c
@@ -131,7 +131,7 @@ U_BOOT_CMD(
diufb, CONFIG_SYS_MAXARGS, 1, ads5121diu_init_show_bmp,
"Init or Display BMP file",
"init\n - initialize DIU\n"
- "addr\n - display bmp at address 'addr'\n"
+ "addr\n - display bmp at address 'addr'"
);
diff --git a/board/amcc/acadia/cmd_acadia.c b/board/amcc/acadia/cmd_acadia.c
index d47cf1a..c427f9e 100644
--- a/board/amcc/acadia/cmd_acadia.c
+++ b/board/amcc/acadia/cmd_acadia.c
@@ -97,5 +97,5 @@ static int do_bootstrap(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
bootstrap, 3, 0, do_bootstrap,
"program the I2C bootstrap EEPROM",
- "<cpu-freq> <nor|nand> - program the I2C bootstrap EEPROM\n"
- );
+ "<cpu-freq> <nor|nand> - program the I2C bootstrap EEPROM"
+);
diff --git a/board/amcc/canyonlands/bootstrap.c b/board/amcc/canyonlands/bootstrap.c
index 30046fe..6dc2cca 100644
--- a/board/amcc/canyonlands/bootstrap.c
+++ b/board/amcc/canyonlands/bootstrap.c
@@ -191,5 +191,5 @@ static int do_bootstrap(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
bootstrap, 2, 0, do_bootstrap,
"program the I2C bootstrap EEPROM",
- "<nand|nor> - strap to boot from NAND or NOR flash\n"
- );
+ "<nand|nor> - strap to boot from NAND or NOR flash"
+);
diff --git a/board/amcc/katmai/cmd_katmai.c b/board/amcc/katmai/cmd_katmai.c
index 2c2849b..335d30c 100644
--- a/board/amcc/katmai/cmd_katmai.c
+++ b/board/amcc/katmai/cmd_katmai.c
@@ -214,5 +214,5 @@ static int do_bootstrap(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
bootstrap, 3, 1, do_bootstrap,
"program the serial device strap",
- "wrclk [prom0|prom1] - program the serial device strap\n"
- );
+ "wrclk [prom0|prom1] - program the serial device strap"
+);
diff --git a/board/amcc/kilauea/cmd_pll.c b/board/amcc/kilauea/cmd_pll.c
index 6b38493..9bae67e 100644
--- a/board/amcc/kilauea/cmd_pll.c
+++ b/board/amcc/kilauea/cmd_pll.c
@@ -291,7 +291,7 @@ U_BOOT_CMD(
RCONF: Read current eeprom configuration. \n\
-----------------------------------------------\n\
WTEST: Test EEPROM write with predefined values\n\
- -----------------------------------------------\n"
- );
+ -----------------------------------------------"
+);
#endif /* CONFIG_CMD_EEPROM */
diff --git a/board/amcc/luan/luan.c b/board/amcc/luan/luan.c
index d2a3b9e..7d02d90 100644
--- a/board/amcc/luan/luan.c
+++ b/board/amcc/luan/luan.c
@@ -331,5 +331,5 @@ U_BOOT_CMD(
l2cache, 2, 1, do_l2cache,
"enable or disable L2 cache",
"[on, off]\n"
- " - enable or disable L2 cache\n"
- );
+ " - enable or disable L2 cache"
+);
diff --git a/board/amcc/makalu/cmd_pll.c b/board/amcc/makalu/cmd_pll.c
index 6b38493..9bae67e 100644
--- a/board/amcc/makalu/cmd_pll.c
+++ b/board/amcc/makalu/cmd_pll.c
@@ -291,7 +291,7 @@ U_BOOT_CMD(
RCONF: Read current eeprom configuration. \n\
-----------------------------------------------\n\
WTEST: Test EEPROM write with predefined values\n\
- -----------------------------------------------\n"
- );
+ -----------------------------------------------"
+);
#endif /* CONFIG_CMD_EEPROM */
diff --git a/board/amcc/sequoia/cmd_sequoia.c b/board/amcc/sequoia/cmd_sequoia.c
index 6dfd8ba..01dd97c 100644
--- a/board/amcc/sequoia/cmd_sequoia.c
+++ b/board/amcc/sequoia/cmd_sequoia.c
@@ -227,5 +227,5 @@ static int do_bootstrap(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
bootstrap, 2, 0, do_bootstrap,
"program the I2C bootstrap EEPROM",
- "<nand|nor> - strap to boot from NAND or NOR flash\n"
- );
+ "<nand|nor> - strap to boot from NAND or NOR flash"
+);
diff --git a/board/amcc/taihu/lcd.c b/board/amcc/taihu/lcd.c
index 6b68f33..c3dc983 100644
--- a/board/amcc/taihu/lcd.c
+++ b/board/amcc/taihu/lcd.c
@@ -233,25 +233,25 @@ static int do_lcd_cur (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
lcd_cls, 1, 1, do_lcd_clear,
"lcd clear display",
- NULL
- );
+ ""
+);
U_BOOT_CMD(
lcd_puts, 2, 1, do_lcd_puts,
"display string on lcd",
- "<string> - <string> to be displayed\n"
- );
+ "<string> - <string> to be displayed"
+);
U_BOOT_CMD(
lcd_putc, 2, 1, do_lcd_putc,
"display char on lcd",
- "<char> - <char> to be displayed\n"
- );
+ "<char> - <char> to be displayed"
+);
U_BOOT_CMD(
lcd_cur, 3, 1, do_lcd_cur,
"shift cursor on lcd",
"<count> <dir> - shift cursor on lcd <count> times, direction is <dir> \n"
" <count> - 0..31\n"
- " <dir> - 0=backward 1=forward\n"
- );
+ " <dir> - 0=backward 1=forward"
+);
diff --git a/board/amcc/taihu/taihu.c b/board/amcc/taihu/taihu.c
index 669429b..d8806ac 100644
--- a/board/amcc/taihu/taihu.c
+++ b/board/amcc/taihu/taihu.c
@@ -94,8 +94,8 @@ static int do_sw_stat(cmd_tbl_t* cmd_tp, int flags, int argc, char *argv[])
U_BOOT_CMD (
sw2_stat, 1, 1, do_sw_stat,
"show status of switch 2",
- NULL
- );
+ ""
+);
static int do_led_ctl(cmd_tbl_t* cmd_tp, int flags, int argc, char *argv[])
{
@@ -134,8 +134,8 @@ U_BOOT_CMD (
led_ctl, 3, 1, do_led_ctl,
"make led 1 or 2 on or off",
"<led_no> <on/off> - make led <led_no> on/off,\n"
- "\tled_no is 1 or 2\t"
- );
+ "\tled_no is 1 or 2"
+);
#define SPI_CS_GPIO0 0
#define SPI_SCLK_GPIO14 14
diff --git a/board/amcc/taihu/update.c b/board/amcc/taihu/update.c
index 8e96905..f9c31b3 100644
--- a/board/amcc/taihu/update.c
+++ b/board/amcc/taihu/update.c
@@ -128,5 +128,5 @@ static int update_boot_eeprom(cmd_tbl_t* cmdtp, int flag, int argc, char *argv[]
U_BOOT_CMD (
update_boot_eeprom, 1, 1, update_boot_eeprom,
"update boot eeprom content",
- NULL
- );
+ ""
+);
diff --git a/board/amcc/taishan/lcd.c b/board/amcc/taishan/lcd.c
index e4d0705..d432cc3 100644
--- a/board/amcc/taishan/lcd.c
+++ b/board/amcc/taishan/lcd.c
@@ -254,18 +254,18 @@ static int do_lcd_cur(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
return 0;
}
-U_BOOT_CMD(lcd_test, 1, 1, do_lcd_test, "lcd test display", NULL);
-U_BOOT_CMD(lcd_cls, 1, 1, do_lcd_clear, "lcd clear display", NULL);
+U_BOOT_CMD(lcd_test, 1, 1, do_lcd_test, "lcd test display", "");
+U_BOOT_CMD(lcd_cls, 1, 1, do_lcd_clear, "lcd clear display", "");
U_BOOT_CMD(lcd_puts, 2, 1, do_lcd_puts,
"display string on lcd",
- "<string> - <string> to be displayed\n");
+ "<string> - <string> to be displayed");
U_BOOT_CMD(lcd_putc, 2, 1, do_lcd_putc,
"display char on lcd",
- "<char> - <char> to be displayed\n");
+ "<char> - <char> to be displayed");
U_BOOT_CMD(lcd_cur, 3, 1, do_lcd_cur,
"shift cursor on lcd",
"<count> <dir>- shift cursor on lcd <count> times, direction is <dir> \n"
- " <count> - 0~31\n" " <dir> - 0,backward; 1, forward\n");
+ " <count> - 0~31\n" " <dir> - 0,backward; 1, forward");
#if 0 /* test-only */
void set_phy_loopback_mode(void)
@@ -373,8 +373,8 @@ static int do_led_test_on(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
}
U_BOOT_CMD(ledon, 1, 1, do_led_test_on,
- "led test light on", NULL);
+ "led test light on", "");
U_BOOT_CMD(ledoff, 1, 1, do_led_test_off,
- "led test light off", NULL);
+ "led test light off", "");
#endif
diff --git a/board/amcc/taishan/showinfo.c b/board/amcc/taishan/showinfo.c
index b471c95..2a78a22 100644
--- a/board/amcc/taishan/showinfo.c
+++ b/board/amcc/taishan/showinfo.c
@@ -168,7 +168,7 @@ int do_show_xbridge_info(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
}
U_BOOT_CMD(xbriinfo, 1, 1, do_show_xbridge_info,
- "Show PCIX bridge info", NULL);
+ "Show PCIX bridge info", "");
#define TAISHAN_PCI_DEV_ID0 0x800
#define TAISHAN_PCI_DEV_ID1 0x1000
@@ -222,7 +222,7 @@ int do_show_pcix_device_info(cmd_tbl_t * cmdtp, int flag, int argc,
}
U_BOOT_CMD(xdevinfo, 1, 1, do_show_pcix_device_info,
- "Show PCIX Device info", NULL);
+ "Show PCIX Device info", "");
extern void show_reset_reg(void);
@@ -233,4 +233,4 @@ int do_show_reset_reg_info(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
}
U_BOOT_CMD(resetinfo, 1, 1, do_show_reset_reg_info,
- "Show Reset REG info", NULL);
+ "Show Reset REG info", "");
diff --git a/board/amcc/taishan/update.c b/board/amcc/taishan/update.c
index 63f8744..aab3a65 100644
--- a/board/amcc/taishan/update.c
+++ b/board/amcc/taishan/update.c
@@ -74,5 +74,5 @@ int do_update_boot_eeprom(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
}
U_BOOT_CMD(update_boot_eeprom, 1, 1, do_update_boot_eeprom,
- "update bootstrap eeprom content", NULL);
+ "update bootstrap eeprom content", "");
#endif
diff --git a/board/amcc/yucca/cmd_yucca.c b/board/amcc/yucca/cmd_yucca.c
index d2ca257..ed6daa3 100644
--- a/board/amcc/yucca/cmd_yucca.c
+++ b/board/amcc/yucca/cmd_yucca.c
@@ -282,5 +282,5 @@ static int setBootStrapClock(cmd_tbl_t *cmdtp, int incrflag, int flag,
U_BOOT_CMD(
evb440spe, 3, 1, do_evb440spe,
"program the serial device strap",
- "wrclk [prom0|prom1] - program the serial device strap\n"
+ "wrclk [prom0|prom1] - program the serial device strap"
);
diff --git a/board/amirix/ap1000/ap1000.c b/board/amirix/ap1000/ap1000.c
index fcf2698..cadfe0b 100644
--- a/board/amirix/ap1000/ap1000.c
+++ b/board/amirix/ap1000/ap1000.c
@@ -670,14 +670,14 @@ U_BOOT_CMD (temp, 6, 0, do_temp_sensor,
" - Set config options.\n"
"\n"
"All values can be decimal or hex (hex preceded with 0x).\n"
- "Only whole numbers are supported for external limits.\n");
+ "Only whole numbers are supported for external limits.");
#if 0
U_BOOT_CMD (loadace, 2, 0, do_loadace,
"load fpga configuration from System ACE compact flash",
"N\n"
" - Load configuration N (0-7) from System ACE compact flash\n"
- "loadace\n" " - loads default configuration\n");
+ "loadace\n" " - loads default configuration");
#endif
U_BOOT_CMD (swconfig, 2, 0, do_swconfigbyte,
@@ -685,19 +685,19 @@ U_BOOT_CMD (swconfig, 2, 0, do_swconfigbyte,
"N [ADDRESS]\n"
" - set software configuration byte to N, optionally use ADDRESS as\n"
" location of buffer for flash copy\n"
- "swconfig\n" " - display software configuration byte\n");
+ "swconfig\n" " - display software configuration byte");
U_BOOT_CMD (pause, 2, 0, do_pause,
"sleep processor until any key is pressed with poll time of N seconds",
"N\n"
" - sleep processor until any key is pressed with poll time of N seconds\n"
"pause\n"
- " - sleep processor until any key is pressed with poll time of 1 second\n");
+ " - sleep processor until any key is pressed with poll time of 1 second");
U_BOOT_CMD (swrecon, 1, 0, do_swreconfig,
"trigger a board reconfigure to the software selected configuration",
"\n"
- " - trigger a board reconfigure to the software selected configuration\n");
+ " - trigger a board reconfigure to the software selected configuration");
int board_eth_init(bd_t *bis)
{
diff --git a/board/amirix/ap1000/powerspan.c b/board/amirix/ap1000/powerspan.c
index f727061..28e2bbc 100644
--- a/board/amirix/ap1000/powerspan.c
+++ b/board/amirix/ap1000/powerspan.c
@@ -487,7 +487,7 @@ U_BOOT_CMD (eeprom, 4, 0, do_eeprom,
" - store contents of eeprom at address ADD\n"
"eeprom p ADD\n"
" - put data stored at address ADD into the eeprom\n"
- "eeprom d\n" " - return eeprom to default contents\n");
+ "eeprom d\n" " - return eeprom to default contents");
unsigned int PowerSpanRead (unsigned int theOffset)
{
diff --git a/board/barco/barco.c b/board/barco/barco.c
index a19e1ed..d7a0078 100644
--- a/board/barco/barco.c
+++ b/board/barco/barco.c
@@ -307,19 +307,19 @@ int barcobcd_boot_image (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD (
try_working, 1, 1, barcobcd_boot_image,
"check flash value and boot the appropriate image",
- "\n"
+ ""
);
U_BOOT_CMD (
boot_working, 1, 1, barcobcd_boot_image,
"check flash value and boot the appropriate image",
- "\n"
+ ""
);
U_BOOT_CMD (
boot_default, 1, 1, barcobcd_boot_image,
"check flash value and boot the appropriate image",
- "\n"
+ ""
);
/*
* We are not using serial communication, so just provide empty functions
diff --git a/board/bc3450/cmd_bc3450.c b/board/bc3450/cmd_bc3450.c
index aa46e58..271ffb1 100644
--- a/board/bc3450/cmd_bc3450.c
+++ b/board/bc3450/cmd_bc3450.c
@@ -198,7 +198,7 @@ U_BOOT_CMD (dip, 1, 1, cmd_dip,
"\n"
" - prints the state of the dip switch and/or\n"
" external configuration inputs as hex value.\n"
- " - \"Config 1\" is the LSB\n");
+ " - \"Config 1\" is the LSB");
/*
@@ -229,7 +229,7 @@ static int cmd_buz (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD (buz, 2, 1, cmd_buz,
"turns buzzer on/off",
- "\n" "buz <on/off>\n" " - turns the buzzer on or off\n");
+ "\n" "buz <on/off>\n" " - turns the buzzer on or off");
#endif /* CONFIG_BC3450_BUZZER */
@@ -326,14 +326,14 @@ U_BOOT_CMD (fp, 3, 1, cmd_fp,
"\n"
"fp bl <on/off>\n"
" - turns the CCFL backlight of the display on/off\n"
- "fp <on/off>\n" " - turns the whole display on/off\n"
+ "fp <on/off>\n" " - turns the whole display on/off"
#ifdef CONFIG_BC3450_CRT
+ "\n"
"fp crt <on/off>\n"
- " - enables/disables the crt output (debug only)\n"
+ " - enables/disables the crt output (debug only)"
#endif /* CONFIG_BC3450_CRT */
);
-
/*
* temp - DS1620 thermometer
*/
@@ -524,7 +524,7 @@ static int cmd_temp (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD (temp, 3, 1, cmd_temp,
"print current temperature",
- "\n" "temp\n" " - print current temperature\n");
+ "\n" "temp\n" " - print current temperature");
#ifdef CONFIG_BC3450_CAN
/*
@@ -818,10 +818,11 @@ int cmd_test (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD (test, 2, 1, cmd_test, "unit test routines", "\n"
#ifdef CONFIG_BC3450_CAN
- "test can\n"
- " - connect CAN1 (X8) with CAN2 (X9) for this test\n"
+ "test can\n"
+ " - connect CAN1 (X8) with CAN2 (X9) for this test\n"
#endif /* CONFIG_BC3450_CAN */
- "test unit-off\n"
- " - turns off the BC3450 unit\n"
- " WARNING: Unsaved environment variables will be lost!\n");
+ "test unit-off\n"
+ " - turns off the BC3450 unit\n"
+ " WARNING: Unsaved environment variables will be lost!"
+);
#endif
diff --git a/board/bf537-stamp/cmd_bf537led.c b/board/bf537-stamp/cmd_bf537led.c
index e77bb0c..e65c4f8 100644
--- a/board/bf537-stamp/cmd_bf537led.c
+++ b/board/bf537-stamp/cmd_bf537led.c
@@ -33,7 +33,7 @@
"led <number> <action>\n" \
" <number> - Index (0-5) of LED to change, or \"all\"\n" \
" <action> - Must be one of:\n" \
- " on off toggle\n"
+ " on off toggle"
/* Number of LEDs supported by the board */
#define NUMBER_LEDS 6
@@ -191,7 +191,7 @@ void set_led_state(int index, int state)
/* Display usage information */
void show_cmd_usage()
{
- printf("Usage:\n%s", USAGE_LONG);
+ printf("Usage:\n%s\n", USAGE_LONG);
}
/* Register information for u-boot to find this command */
diff --git a/board/cm5200/cmd_cm5200.c b/board/cm5200/cmd_cm5200.c
index f009eed..cd98ae2 100644
--- a/board/cm5200/cmd_cm5200.c
+++ b/board/cm5200/cmd_cm5200.c
@@ -443,6 +443,6 @@ U_BOOT_CMD(
"fkt rs232 number\n"
" - Test RS232 (loopback plug(s) for RS232 required)\n"
"fkt usb\n"
- " - Test USB communication\n"
+ " - Test USB communication"
);
#endif /* CONFIG_CMD_BSP */
diff --git a/board/delta/delta.c b/board/delta/delta.c
index 73e6c3e..84ff47e 100644
--- a/board/delta/delta.c
+++ b/board/delta/delta.c
@@ -260,7 +260,7 @@ int do_kbd (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
kbd, 1, 1, do_kbd,
"read keyboard status",
- NULL
+ ""
);
#endif /* DELTA_CHECK_KEYBD */
diff --git a/board/esd/ar405/ar405.c b/board/esd/ar405/ar405.c
index 14520e1..9d1b6d2 100644
--- a/board/esd/ar405/ar405.c
+++ b/board/esd/ar405/ar405.c
@@ -247,9 +247,8 @@ int do_digtest(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
digtest, 3, 1, do_digtest,
"Test digital in-/output",
- NULL
- );
-
+ ""
+);
#define ERROR_DELTA 256
@@ -341,8 +340,8 @@ int do_anatest(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
anatest, 2, 1, do_anatest,
"Test analog in-/output",
- NULL
- );
+ ""
+);
int counter = 0;
@@ -408,6 +407,6 @@ int do_inctest(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
inctest, 3, 1, do_inctest,
"Test incremental encoder inputs",
- NULL
- );
+ ""
+);
#endif
diff --git a/board/esd/cms700/cms700.c b/board/esd/cms700/cms700.c
index 658a267..01b1223 100644
--- a/board/esd/cms700/cms700.c
+++ b/board/esd/cms700/cms700.c
@@ -189,8 +189,9 @@ int do_eep_wren (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
}
U_BOOT_CMD(eepwren, 2, 0, do_eep_wren,
- "Enable / disable / query EEPROM write access",
- NULL);
+ "Enable / disable / query EEPROM write access",
+ ""
+);
#endif /* #if defined(CONFIG_SYS_EEPROM_WREN) */
/* ------------------------------------------------------------------------- */
diff --git a/board/esd/common/auto_update.c b/board/esd/common/auto_update.c
index 8593125..33aeb46 100644
--- a/board/esd/common/auto_update.c
+++ b/board/esd/common/auto_update.c
@@ -551,6 +551,6 @@ int auto_update(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
autoupd, 1, 1, auto_update,
"Automatically update images",
- NULL
+ ""
);
#endif /* CONFIG_AUTO_UPDATE */
diff --git a/board/esd/common/cmd_loadpci.c b/board/esd/common/cmd_loadpci.c
index c779f79..47e946f 100644
--- a/board/esd/common/cmd_loadpci.c
+++ b/board/esd/common/cmd_loadpci.c
@@ -124,7 +124,7 @@ int do_loadpci(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
loadpci, 1, 1, do_loadpci,
"Wait for pci bootcmd and boot it",
- NULL
- );
+ ""
+);
#endif
diff --git a/board/esd/common/lcd.c b/board/esd/common/lcd.c
index 066df74..5c50b4c 100644
--- a/board/esd/common/lcd.c
+++ b/board/esd/common/lcd.c
@@ -373,5 +373,5 @@ int do_esdbmp(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
esdbmp, 2, 1, do_esdbmp,
"display BMP image",
- "<imageAddr> - display image\n"
+ "<imageAddr> - display image"
);
diff --git a/board/esd/common/xilinx_jtag/micro.c b/board/esd/common/xilinx_jtag/micro.c
index 37ac0cc..414e821 100644
--- a/board/esd/common/xilinx_jtag/micro.c
+++ b/board/esd/common/xilinx_jtag/micro.c
@@ -1869,4 +1869,4 @@ U_BOOT_CMD(
cpld, 2, 1, do_cpld,
"program onboard CPLD",
"<xsvf-addr>"
- );
+);
diff --git a/board/esd/cpci2dp/cpci2dp.c b/board/esd/cpci2dp/cpci2dp.c
index aba240f..cd57ed4 100644
--- a/board/esd/cpci2dp/cpci2dp.c
+++ b/board/esd/cpci2dp/cpci2dp.c
@@ -183,6 +183,6 @@ int do_eep_wren (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
eepwren, 2, 0, do_eep_wren,
"Enable / disable / query EEPROM write access",
- NULL
- );
+ ""
+);
#endif /* #if defined(CONFIG_SYS_EEPROM_WREN) */
diff --git a/board/esd/cpci405/cpci405.c b/board/esd/cpci405/cpci405.c
index ccbe245..a677c62 100644
--- a/board/esd/cpci405/cpci405.c
+++ b/board/esd/cpci405/cpci405.c
@@ -690,8 +690,8 @@ int do_onewire(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
onewire, 1, 1, do_onewire,
"Read 1-write ID",
- NULL
- );
+ ""
+);
#define CONFIG_SYS_I2C_EEPROM_ADDR_2 0x51 /* EEPROM CAT24WC32 */
#define CONFIG_ENV_SIZE_2 0x800 /* 2048 bytes may be used for env vars */
@@ -751,8 +751,8 @@ int do_get_bpip(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
getbpip, 1, 1, do_get_bpip,
"Update IP-Address with Backplane IP-Address",
- NULL
- );
+ ""
+);
/*
* Set and print backplane ip...
@@ -787,7 +787,7 @@ int do_set_bpip(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
setbpip, 2, 1, do_set_bpip,
"Write Backplane IP-Address",
- NULL
- );
+ ""
+);
#endif /* CONFIG_CPCI405AB */
diff --git a/board/esd/cpci5200/cpci5200.c b/board/esd/cpci5200/cpci5200.c
index b6b50fb..36fcf7f 100644
--- a/board/esd/cpci5200/cpci5200.c
+++ b/board/esd/cpci5200/cpci5200.c
@@ -295,4 +295,6 @@ int do_writepci(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(writepci, 3, 1, do_writepci,
"Write some data to pcibus",
- "<addr> <size>\n" " - Write some data to pcibus.\n");
+ "<addr> <size>\n"
+ ""
+);
diff --git a/board/esd/cpci750/cpci750.c b/board/esd/cpci750/cpci750.c
index 4826633..258d8b2 100644
--- a/board/esd/cpci750/cpci750.c
+++ b/board/esd/cpci750/cpci750.c
@@ -994,5 +994,5 @@ int do_show_config(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
show_config, 1, 1, do_show_config,
"Show Marvell strapping register",
- "Show Marvell strapping register (ResetSampleLow ResetSampleHigh)\n"
- );
+ "Show Marvell strapping register (ResetSampleLow ResetSampleHigh)"
+);
diff --git a/board/esd/dasa_sim/cmd_dasa_sim.c b/board/esd/dasa_sim/cmd_dasa_sim.c
index 0310c47..675e507 100644
--- a/board/esd/dasa_sim/cmd_dasa_sim.c
+++ b/board/esd/dasa_sim/cmd_dasa_sim.c
@@ -230,7 +230,7 @@ U_BOOT_CMD(
pci9054, 3, 1, do_pci9054,
"PLX PCI9054 EEPROM access",
"pci9054 info - print EEPROM values\n"
- "pci9054 update - updates EEPROM with default values\n"
+ "pci9054 update - updates EEPROM with default values"
);
/* ------------------------------------------------------------------------- */
diff --git a/board/esd/du440/du440.c b/board/esd/du440/du440.c
index 45dfa6f..0ec519b 100644
--- a/board/esd/du440/du440.c
+++ b/board/esd/du440/du440.c
@@ -607,8 +607,8 @@ int do_dcf77(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
dcf77, 1, 1, do_dcf77,
"Check DCF77 receiver",
- NULL
- );
+ ""
+);
/*
* initialize USB hub via I2C1
@@ -657,8 +657,8 @@ int do_hubinit(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
hubinit, 1, 1, do_hubinit,
"Initialize USB hub",
- NULL
- );
+ ""
+);
#endif /* CONFIG_I2C_MULTI_BUS */
#define CONFIG_SYS_BOOT_EEPROM_PAGE_WRITE_BITS 3
@@ -790,8 +790,8 @@ int do_setup_boot_eeprom(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
sbe, 2, 0, do_setup_boot_eeprom,
"setup boot eeprom",
- NULL
- );
+ ""
+);
#if defined(CONFIG_SYS_EEPROM_WREN)
/*
@@ -863,8 +863,9 @@ int do_eep_wren (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
}
U_BOOT_CMD(eepwren, 2, 0, do_eep_wren,
- "Enable / disable / query EEPROM write access",
- NULL);
+ "Enable / disable / query EEPROM write access",
+ ""
+);
#endif /* #if defined(CONFIG_SYS_EEPROM_WREN) */
static int got_pldirq;
@@ -916,8 +917,8 @@ int do_waitpwrirq(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
wpi, 1, 1, do_waitpwrirq,
"Wait for power change interrupt",
- NULL
- );
+ ""
+);
/*
* initialize DVI panellink transmitter
@@ -961,8 +962,8 @@ int do_dviinit(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
dviinit, 1, 1, do_dviinit,
"Initialize DVI Panellink transmitter",
- NULL
- );
+ ""
+);
/*
* TODO: 'time' command might be useful for others as well.
@@ -1001,8 +1002,8 @@ int do_time(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
time, CONFIG_SYS_MAXARGS, 1, do_time,
"run command and output execution time",
- NULL
- );
+ ""
+);
extern void video_hw_rectfill (
unsigned int bpp, /* bytes per pixel */
@@ -1051,5 +1052,5 @@ int do_gfxdemo(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
gfxdemo, CONFIG_SYS_MAXARGS, 1, do_gfxdemo,
"demo",
- NULL
- );
+ ""
+);
diff --git a/board/esd/hh405/hh405.c b/board/esd/hh405/hh405.c
index eab952c..5ae4c75 100644
--- a/board/esd/hh405/hh405.c
+++ b/board/esd/hh405/hh405.c
@@ -769,8 +769,9 @@ int do_eep_wren (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
}
U_BOOT_CMD(eepwren, 2, 0, do_eep_wren,
- "Enable / disable / query EEPROM write access",
- NULL);
+ "Enable / disable / query EEPROM write access",
+ ""
+);
#endif /* #if defined(CONFIG_SYS_EEPROM_WREN) */
diff --git a/board/esd/ocrtc/cmd_ocrtc.c b/board/esd/ocrtc/cmd_ocrtc.c
index db2c548..5f3254d 100644
--- a/board/esd/ocrtc/cmd_ocrtc.c
+++ b/board/esd/ocrtc/cmd_ocrtc.c
@@ -55,7 +55,7 @@ int do_setdevice(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
setdevice, 1, 1, do_setdevice,
"Set device number on pci adapter boards",
- NULL
+ ""
);
@@ -78,7 +78,7 @@ int do_getdevice(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
getdevice, 1, 1, do_getdevice,
"Get device number and set slot env variable",
- NULL
+ ""
);
#endif
diff --git a/board/esd/pci405/cmd_pci405.c b/board/esd/pci405/cmd_pci405.c
index a0d1f3f..1d14611 100644
--- a/board/esd/pci405/cmd_pci405.c
+++ b/board/esd/pci405/cmd_pci405.c
@@ -109,6 +109,6 @@ int do_loadpci(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
loadpci, 1, 1, do_loadpci,
"Wait for pci-image and boot it",
- NULL
+ ""
);
#endif
diff --git a/board/esd/pci405/pci405.c b/board/esd/pci405/pci405.c
index 8973f97..56184ca 100644
--- a/board/esd/pci405/pci405.c
+++ b/board/esd/pci405/pci405.c
@@ -381,5 +381,5 @@ U_BOOT_CMD(
"wpeeprom 1\n"
" - enable I2C EEPROM write protection\n"
"wpeeprom 0\n"
- " - disable I2C EEPROM write protection\n"
- );
+ " - disable I2C EEPROM write protection"
+);
diff --git a/board/esd/pf5200/pf5200.c b/board/esd/pf5200/pf5200.c
index f225f0e..4e64e83 100644
--- a/board/esd/pf5200/pf5200.c
+++ b/board/esd/pf5200/pf5200.c
@@ -294,7 +294,7 @@ int do_poweroff(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
return (0);
}
-U_BOOT_CMD(poweroff, 1, 1, do_poweroff, "Switch off power", NULL);
+U_BOOT_CMD(poweroff, 1, 1, do_poweroff, "Switch off power", "");
int phypower(int flag)
{
@@ -338,7 +338,7 @@ int do_phypower(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
}
U_BOOT_CMD(phypower, 2, 2, do_phypower,
- "Switch power of ethernet phy", NULL);
+ "Switch power of ethernet phy", "");
int do_writepci(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
{
@@ -369,5 +369,7 @@ int do_writepci(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
}
U_BOOT_CMD(writepci, 3, 1, do_writepci,
- "Write some data to pcibus",
- "<addr> <size>\n" " - Write some data to pcibus.\n");
+ "Write some data to pcibus",
+ "<addr> <size>\n"
+ ""
+);
diff --git a/board/esd/plu405/plu405.c b/board/esd/plu405/plu405.c
index a94604a..fdacbf6 100644
--- a/board/esd/plu405/plu405.c
+++ b/board/esd/plu405/plu405.c
@@ -333,6 +333,7 @@ int do_eep_wren (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
}
U_BOOT_CMD(eepwren, 2, 0, do_eep_wren,
- "Enable / disable / query EEPROM write access",
- NULL);
+ "Enable / disable / query EEPROM write access",
+ ""
+);
#endif /* #if defined(CONFIG_SYS_EEPROM_WREN) */
diff --git a/board/esd/pmc440/cmd_pmc440.c b/board/esd/pmc440/cmd_pmc440.c
index 0fbc3dc..1af431b 100644
--- a/board/esd/pmc440/cmd_pmc440.c
+++ b/board/esd/pmc440/cmd_pmc440.c
@@ -99,8 +99,8 @@ int do_waithci(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
waithci, 1, 1, do_waithci,
"Wait for host control interrupt",
- NULL
- );
+ ""
+);
void dump_fifo(pmc440_fpga_t *fpga, int f, int *n)
{
@@ -266,8 +266,8 @@ U_BOOT_CMD(
" - with 'wait' argument: interrupt driven read from all fifos\n"
" - with 'read' argument: read current contents from all fifos\n"
" - with 'write' argument: write 'data' 'cnt' times to "
- "'fifo' or 'address'\n"
- );
+ "'fifo' or 'address'"
+);
int do_setup_bootstrap_eeprom(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
{
@@ -338,7 +338,7 @@ U_BOOT_CMD(
sbe, 4, 0, do_setup_bootstrap_eeprom,
"setup bootstrap eeprom",
"<cpufreq:400|533|667> [<console-uart:0|1> [<bringup delay (0..20s)>]]"
- );
+);
#if defined(CONFIG_PRAM)
#include <environment.h>
@@ -400,8 +400,8 @@ int do_painit(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
painit, 1, 1, do_painit,
"prepare PciAccess system",
- NULL
- );
+ ""
+);
#endif /* CONFIG_PRAM */
int do_selfreset(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
@@ -412,8 +412,8 @@ int do_selfreset(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
selfreset, 1, 1, do_selfreset,
"assert self-reset# signal",
- NULL
- );
+ ""
+);
int do_resetout(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
{
@@ -449,8 +449,8 @@ int do_resetout(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
resetout, 2, 1, do_resetout,
"assert PMC-RESETOUT# signal",
- NULL
- );
+ ""
+);
int do_inta(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
{
@@ -481,8 +481,8 @@ int do_inta(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
inta, 2, 1, do_inta,
"Assert/Deassert or query INTA# state in non-monarch mode",
- NULL
- );
+ ""
+);
/* test-only */
int do_pmm(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
@@ -514,8 +514,8 @@ int do_pmm(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
pmm, 2, 1, do_pmm,
"Setup pmm[1] registers",
- "<pciaddr> (pciaddr will be aligned to 256MB)\n"
- );
+ "<pciaddr> (pciaddr will be aligned to 256MB)"
+);
#if defined(CONFIG_SYS_EEPROM_WREN)
int do_eep_wren(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
@@ -549,8 +549,9 @@ int do_eep_wren(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
return state;
}
U_BOOT_CMD(eepwren, 2, 0, do_eep_wren,
- "Enable / disable / query EEPROM write access",
- NULL);
+ "Enable / disable / query EEPROM write access",
+ ""
+);
#endif /* #if defined(CONFIG_SYS_EEPROM_WREN) */
#endif /* CONFIG_CMD_BSP */
diff --git a/board/esd/tasreg/tasreg.c b/board/esd/tasreg/tasreg.c
index 9602ee5..1844442 100644
--- a/board/esd/tasreg/tasreg.c
+++ b/board/esd/tasreg/tasreg.c
@@ -250,8 +250,8 @@ int do_iploop(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
iploop, 2, 1, do_iploop,
"i2c probe loop <addr>",
- NULL
- );
+ ""
+);
/*
*/
@@ -303,8 +303,8 @@ int do_codec(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
codec, 1, 1, do_codec,
"Enable codec",
- NULL
- );
+ ""
+);
/*
*/
@@ -336,8 +336,8 @@ int do_saa(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
saa, 5, 1, do_saa,
"Write to SAA1064 <addr> <instr> <cntrl> <data>",
- NULL
- );
+ ""
+);
/*
*/
@@ -375,8 +375,8 @@ int do_iwrite(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
iwrite, 6, 1, do_iwrite,
"Write n bytes to I2C-device",
- "addr cnt data0 ... datan\n"
- );
+ "addr cnt data0 ... datan"
+);
/*
*/
@@ -407,8 +407,8 @@ int do_iread(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
iread, 3, 1, do_iread,
"Read from I2C <addr> <cnt>",
- NULL
- );
+ ""
+);
/*
*/
@@ -445,6 +445,6 @@ int do_ireadl(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
ireadl, 2, 1, do_ireadl,
"Read-loop from I2C <addr>",
- NULL
- );
+ ""
+);
#endif
diff --git a/board/esd/voh405/voh405.c b/board/esd/voh405/voh405.c
index 96a04b3..9127550 100644
--- a/board/esd/voh405/voh405.c
+++ b/board/esd/voh405/voh405.c
@@ -392,6 +392,7 @@ int do_eep_wren (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
}
U_BOOT_CMD(eepwren, 2, 0, do_eep_wren,
- "Enable / disable / query EEPROM write access",
- NULL);
+ "Enable / disable / query EEPROM write access",
+ ""
+);
#endif /* #if defined(CONFIG_SYS_EEPROM_WREN) */
diff --git a/board/evb64260/zuma_pbb.c b/board/evb64260/zuma_pbb.c
index aef9c27..cab4fca 100644
--- a/board/evb64260/zuma_pbb.c
+++ b/board/evb64260/zuma_pbb.c
@@ -204,19 +204,17 @@ U_BOOT_CMD(
zinit, 1, 0, do_zuma_init_pbb,
"init zuma pbb",
"\n"
- " - init zuma pbb\n"
);
U_BOOT_CMD(
zdtest, 3, 1, do_zuma_test_dma,
"run dma test",
"[cmd [count]]\n"
- " - run dma cmd (w=0,v=1,cp=2,cmp=3,wi=4,vi=5), count bytes\n"
+ " - run dma cmd (w=0,v=1,cp=2,cmp=3,wi=4,vi=5), count bytes"
);
U_BOOT_CMD(
zminit, 1, 0, do_zuma_init_mbox,
"init zuma mbox",
"\n"
- " - init zuma mbox\n"
);
#endif
diff --git a/board/freescale/common/pixis.c b/board/freescale/common/pixis.c
index eb76d93..4851f06 100644
--- a/board/freescale/common/pixis.c
+++ b/board/freescale/common/pixis.c
@@ -279,9 +279,10 @@ int pixis_disable_watchdog_cmd(cmd_tbl_t *cmdtp,
}
U_BOOT_CMD(
- diswd, 1, 0, pixis_disable_watchdog_cmd,
- "Disable watchdog timer",
- NULL);
+ diswd, 1, 0, pixis_disable_watchdog_cmd,
+ "Disable watchdog timer",
+ ""
+);
#ifdef CONFIG_PIXIS_SGMII_CMD
int pixis_set_sgmii(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
@@ -343,14 +344,15 @@ int pixis_set_sgmii(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
}
U_BOOT_CMD(
- pixis_set_sgmii, CONFIG_SYS_MAXARGS, 1, pixis_set_sgmii,
- "pixis_set_sgmii"
- " - Enable or disable SGMII mode for a given TSEC \n",
- "\npixis_set_sgmii [TSEC num] <on|off|switch>\n"
- " TSEC num: 1,2,3,4 or 'all'. 'all' is default.\n"
- " on - enables SGMII\n"
- " off - disables SGMII\n"
- " switch - use switch settings\n");
+ pixis_set_sgmii, CONFIG_SYS_MAXARGS, 1, pixis_set_sgmii,
+ "pixis_set_sgmii"
+ " - Enable or disable SGMII mode for a given TSEC \n",
+ "\npixis_set_sgmii [TSEC num] <on|off|switch>\n"
+ " TSEC num: 1,2,3,4 or 'all'. 'all' is default.\n"
+ " on - enables SGMII\n"
+ " off - disables SGMII\n"
+ " switch - use switch settings"
+);
#endif
/*
@@ -544,5 +546,5 @@ U_BOOT_CMD(
" pixis_reset [altbank]\n"
" pixis_reset altbank wd\n"
" pixis_reset altbank cf <SYSCLK freq> <COREPLL ratio> <MPXPLL ratio>\n"
- " pixis_reset cf <SYSCLK freq> <COREPLL ratio> <MPXPLL ratio>\n"
- );
+ " pixis_reset cf <SYSCLK freq> <COREPLL ratio> <MPXPLL ratio>"
+);
diff --git a/board/freescale/mpc8610hpcd/mpc8610hpcd_diu.c b/board/freescale/mpc8610hpcd/mpc8610hpcd_diu.c
index 2b2d5d7..0ad878c 100644
--- a/board/freescale/mpc8610hpcd/mpc8610hpcd_diu.c
+++ b/board/freescale/mpc8610hpcd/mpc8610hpcd_diu.c
@@ -140,8 +140,8 @@ U_BOOT_CMD(
diufb, CONFIG_SYS_MAXARGS, 1, mpc8610diu_init_show_bmp,
"Init or Display BMP file",
"init\n - initialize DIU\n"
- "addr\n - display bmp at address 'addr'\n"
- );
+ "addr\n - display bmp at address 'addr'"
+);
#if defined(CONFIG_VIDEO) || defined(CONFIG_CFB_CONSOLE)
diff --git a/board/g2000/g2000.c b/board/g2000/g2000.c
index b35038d..218f1be 100644
--- a/board/g2000/g2000.c
+++ b/board/g2000/g2000.c
@@ -186,7 +186,7 @@ int do_dumpebc(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
dumpebc, 1, 1, do_dumpebc,
"Dump all EBC registers",
- NULL
+ ""
);
@@ -208,7 +208,7 @@ int do_dumpdcr(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
dumpdcr, 1, 1, do_dumpdcr,
"Dump all DCR registers",
- NULL
+ ""
);
@@ -272,6 +272,6 @@ int do_dumpspr(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
dumpspr, 1, 1, do_dumpspr,
"Dump all SPR registers",
- NULL
+ ""
);
#endif
diff --git a/board/hymod/bsp.c b/board/hymod/bsp.c
index 092d368..262070f 100644
--- a/board/hymod/bsp.c
+++ b/board/hymod/bsp.c
@@ -297,7 +297,7 @@ U_BOOT_CMD(
"fpga info\n"
" - print information about the Hymod FPGA, namely the\n"
" memory addresses at which the four FPGA local bus\n"
- " address spaces appear in the physical address space\n"
+ " address spaces appear in the physical address space"
);
/* ------------------------------------------------------------------------- */
int
@@ -340,7 +340,7 @@ U_BOOT_CMD(
"[type]\n"
" - write zeroes into the EEPROM on the board of type `type'\n"
" (`type' is either `main' or `mezz' - default `main')\n"
- " Note: the EEPROM write enable jumper must be installed\n"
+ " Note: the EEPROM write enable jumper must be installed"
);
/* ------------------------------------------------------------------------- */
diff --git a/board/inka4x0/inkadiag.c b/board/inka4x0/inkadiag.c
index 12c0a85..3761ef6 100644
--- a/board/inka4x0/inkadiag.c
+++ b/board/inka4x0/inkadiag.c
@@ -439,14 +439,14 @@ static int do_inkadiag_help(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
cmd_tbl_t cmd_inkadiag_sub[] = {
U_BOOT_CMD_MKENT(io, 1, 1, do_inkadiag_io, "read digital input",
- "<drawer1|drawer2|other> [value] - get or set specified signal\n"),
+ "<drawer1|drawer2|other> [value] - get or set specified signal"),
U_BOOT_CMD_MKENT(serial, 4, 1, do_inkadiag_serial, "test serial port",
"<num> <mode> <baudrate> <msg> - test uart num [0..11] in mode\n"
- "and baudrate with msg\n"),
+ "and baudrate with msg"),
U_BOOT_CMD_MKENT(buzzer, 2, 1, do_inkadiag_buzzer, "activate buzzer",
- "<period> <freq> - turn buzzer on for period ms with freq hz\n"),
+ "<period> <freq> - turn buzzer on for period ms with freq hz"),
U_BOOT_CMD_MKENT(help, 4, 1, do_inkadiag_help, "get help",
- "[command] - get help for command\n"),
+ "[command] - get help for command"),
};
static int do_inkadiag_help(cmd_tbl_t *cmdtp, int flag,
@@ -483,7 +483,7 @@ U_BOOT_CMD(inkadiag, 6, 1, do_inkadiag,
"inkadiag - inka diagnosis\n",
"[inkadiag what ...]\n"
" - perform a diagnosis on inka hardware\n"
- "'inkadiag' performs hardware tests.\n\n");
+ "'inkadiag' performs hardware tests.");
/* Relocate the command table function pointers when running in RAM */
int inkadiag_init_r (void) {
diff --git a/board/keymile/common/keymile_hdlc_enet.c b/board/keymile/common/keymile_hdlc_enet.c
index 5797880..2e913ad 100644
--- a/board/keymile/common/keymile_hdlc_enet.c
+++ b/board/keymile/common/keymile_hdlc_enet.c
@@ -591,7 +591,7 @@ int hdlc_enet_stest(struct cmd_tbl_s *a, int b, int c, char **d)
U_BOOT_CMD(
stest, 1, 1, hdlc_enet_stest,
"simple send test for hdlc_enet",
- "no arguments\n"
+ ""
);
/* simple receive test routine */
int hdlc_enet_rtest(struct cmd_tbl_s *a, int b, int c, char **d)
@@ -613,7 +613,7 @@ int hdlc_enet_rtest(struct cmd_tbl_s *a, int b, int c, char **d)
U_BOOT_CMD(
rtest, 1, 1, hdlc_enet_rtest,
"simple receive test for hdlc_enet",
- "no arguments\n"
+ ""
);
#endif
diff --git a/board/lwmon/lwmon.c b/board/lwmon/lwmon.c
index 1b665a9..75b3209 100644
--- a/board/lwmon/lwmon.c
+++ b/board/lwmon/lwmon.c
@@ -853,7 +853,7 @@ U_BOOT_CMD(
pic, 4, 1, do_pic,
"read and write PIC registers",
"read reg - read PIC register `reg'\n"
- "pic write reg val - write value `val' to PIC register `reg'\n"
+ "pic write reg val - write value `val' to PIC register `reg'"
);
/***********************************************************************
@@ -911,7 +911,7 @@ int do_kbd (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
kbd, 1, 1, do_kbd,
"read keyboard status",
- NULL
+ ""
);
/* Read and set LSB switch */
@@ -985,7 +985,7 @@ U_BOOT_CMD(
"check and set LSB switch",
"on - switch LSB on\n"
"lsb off - switch LSB off\n"
- "lsb - print current setting\n"
+ "lsb - print current setting"
);
#endif
diff --git a/board/lwmon5/kbd.c b/board/lwmon5/kbd.c
index bafd39c..be1a1df 100644
--- a/board/lwmon5/kbd.c
+++ b/board/lwmon5/kbd.c
@@ -433,7 +433,7 @@ int do_kbd (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
kbd, 1, 1, do_kbd,
"read keyboard status",
- NULL
+ ""
);
/*----------------------------- Utilities -----------------------------*/
diff --git a/board/lwmon5/lwmon5.c b/board/lwmon5/lwmon5.c
index 4c04b98..9b76e76 100644
--- a/board/lwmon5/lwmon5.c
+++ b/board/lwmon5/lwmon5.c
@@ -487,7 +487,7 @@ int do_eeprom_wp(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
eepromwp, 2, 0, do_eeprom_wp,
"eeprom write protect off/on",
- "<on|off> - enable (on) or disable (off) I2C EEPROM write protect\n"
+ "<on|off> - enable (on) or disable (off) I2C EEPROM write protect"
);
#if defined(CONFIG_VIDEO)
diff --git a/board/micronas/vct/smc_eeprom.c b/board/micronas/vct/smc_eeprom.c
index 2bc7ad4..6587f13 100644
--- a/board/micronas/vct/smc_eeprom.c
+++ b/board/micronas/vct/smc_eeprom.c
@@ -384,11 +384,11 @@ static int do_eeprom_save_mac(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]
}
U_BOOT_CMD(smcee, 1, 0, do_eeprom_erase_all,
- "smcee - Erase content of SMC EEPROM\n",);
+ "smcee - Erase content of SMC EEPROM",);
U_BOOT_CMD(smced, 1, 0, do_eeprom_dump,
- "smced - Dump content of SMC EEPROM\n",);
+ "smced - Dump content of SMC EEPROM",);
U_BOOT_CMD(smcew, 2, 0, do_eeprom_save_mac,
"smcew - Write MAC address to SMC EEPROM\n",
- "aa:bb:cc:dd:ee:ff new mac address\n");
+ "aa:bb:cc:dd:ee:ff new mac address");
diff --git a/board/mpl/mip405/cmd_mip405.c b/board/mpl/mip405/cmd_mip405.c
index dc13804..cd93a7c 100644
--- a/board/mpl/mip405/cmd_mip405.c
+++ b/board/mpl/mip405/cmd_mip405.c
@@ -60,7 +60,7 @@ U_BOOT_CMD(
"mip405 flash mps - updates U-Boot with image from MPS\n"
"mip405 info - displays board information\n"
"mip405 led <on> - switches LED on (on=1) or off (on=0)\n"
- "mip405 mem [cnt] - Memory Test <cnt>-times, <cnt> = -1 loop forever\n"
+ "mip405 mem [cnt] - Memory Test <cnt>-times, <cnt> = -1 loop forever"
);
/* ------------------------------------------------------------------------- */
diff --git a/board/mpl/pati/cmd_pati.c b/board/mpl/pati/cmd_pati.c
index 95bfdcc..0682323 100644
--- a/board/mpl/pati/cmd_pati.c
+++ b/board/mpl/pati/cmd_pati.c
@@ -443,7 +443,7 @@ U_BOOT_CMD(
" era - erase PCI EEPROM (write all word to 0xffff)\n"
" reload- Reload PCI Bridge with EEPROM Values\n"
" NOTE: <addr> must start on word boundary\n"
- " <offset> and <size> must be even byte values\n"
+ " <offset> and <size> must be even byte values"
);
/* ------------------------------------------------------------------------- */
diff --git a/board/mpl/pip405/cmd_pip405.c b/board/mpl/pip405/cmd_pip405.c
index ad5e0a1..6bbae89 100644
--- a/board/mpl/pip405/cmd_pip405.c
+++ b/board/mpl/pip405/cmd_pip405.c
@@ -63,7 +63,7 @@ U_BOOT_CMD(
"PIP405 specific Cmds",
"flash mem [SrcAddr] - updates U-Boot with image in memory\n"
"pip405 flash floppy [SrcAddr] - updates U-Boot with image from floppy\n"
- "pip405 flash mps - updates U-Boot with image from MPS\n"
+ "pip405 flash mps - updates U-Boot with image from MPS"
);
/* ------------------------------------------------------------------------- */
diff --git a/board/mpl/vcma9/cmd_vcma9.c b/board/mpl/vcma9/cmd_vcma9.c
index cbe7fe2..0160774 100644
--- a/board/mpl/vcma9/cmd_vcma9.c
+++ b/board/mpl/vcma9/cmd_vcma9.c
@@ -174,5 +174,5 @@ int do_vcma9(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
vcma9, 6, 1, do_vcma9,
"VCMA9 specific commands",
- "flash mem [SrcAddr]\n - updates U-Boot with image in memory\n"
+ "flash mem [SrcAddr]\n - updates U-Boot with image in memory"
);
diff --git a/board/pcippc2/pcippc2.c b/board/pcippc2/pcippc2.c
index 80c2cb5..7985f7d 100644
--- a/board/pcippc2/pcippc2.c
+++ b/board/pcippc2/pcippc2.c
@@ -239,7 +239,7 @@ U_BOOT_CMD(
"check and set watchdog",
"on - switch watchDog on\n"
"wd off - switch watchdog off\n"
- "wd - print current status\n"
+ "wd - print current status"
);
#endif
diff --git a/board/pcs440ep/pcs440ep.c b/board/pcs440ep/pcs440ep.c
index 9cc3f5b..47d6391 100644
--- a/board/pcs440ep/pcs440ep.c
+++ b/board/pcs440ep/pcs440ep.c
@@ -763,7 +763,7 @@ U_BOOT_CMD(
" 0x02 = DIAG 2 on\n"
" 0x04 = DIAG 3 on\n"
" 0x08 = DIAG 4 on\n"
- " > 0x100 set the LED, who are on, to state blinking\n"
+ " > 0x100 set the LED, who are on, to state blinking"
);
#if defined(CONFIG_SHA1_CHECK_UB_IMG)
@@ -823,7 +823,7 @@ U_BOOT_CMD(
"calculate the SHA1 Sum",
"address len [addr] calculate the SHA1 sum [save at addr]\n"
" -p calculate the SHA1 sum from the U-Boot image in flash and print\n"
- " -c check the U-Boot image in flash\n"
+ " -c check the U-Boot image in flash"
);
#endif
diff --git a/board/pn62/cmd_pn62.c b/board/pn62/cmd_pn62.c
index ff5d63e..a989351 100644
--- a/board/pn62/cmd_pn62.c
+++ b/board/pn62/cmd_pn62.c
@@ -54,8 +54,8 @@ int do_led (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
led , 3, 1, do_led,
"set LED 0..11 on the PN62 board",
- "i fun\n"
- " - set 'i'th LED to function 'fun'\n"
+ "i fun"
+ " - set 'i'th LED to function 'fun'"
);
/*
@@ -177,7 +177,7 @@ U_BOOT_CMD(
loadpci, 2, 1, do_loadpci,
"load binary file over PCI",
"[addr]\n"
- " - load binary file over PCI to address 'addr'\n"
+ " - load binary file over PCI to address 'addr'"
);
#endif
diff --git a/board/prodrive/pdnb3/pdnb3.c b/board/prodrive/pdnb3/pdnb3.c
index 8777284..c323456 100644
--- a/board/prodrive/pdnb3/pdnb3.c
+++ b/board/prodrive/pdnb3/pdnb3.c
@@ -228,7 +228,7 @@ int do_fpga(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
fpga, 2, 0, do_fpga,
"boot FPGA",
- "address size\n - boot FPGA with gzipped image at <address>\n"
+ "address size\n - boot FPGA with gzipped image at <address>"
);
#if defined(CONFIG_CMD_PCI) || defined(CONFIG_PCI)
diff --git a/board/pxa255_idp/pxa_idp.c b/board/pxa255_idp/pxa_idp.c
index aa598aa..e9e479c 100644
--- a/board/pxa255_idp/pxa_idp.c
+++ b/board/pxa255_idp/pxa_idp.c
@@ -129,7 +129,7 @@ int do_idpcmd(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(idpcmd, CONFIG_SYS_MAXARGS, 0, do_idpcmd,
"custom IDP command",
- "no args at this time\n"
+ "no args at this time"
);
#endif
diff --git a/board/r360mpi/r360mpi.c b/board/r360mpi/r360mpi.c
index 1871984..703af73 100644
--- a/board/r360mpi/r360mpi.c
+++ b/board/r360mpi/r360mpi.c
@@ -415,5 +415,5 @@ int do_kbd (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
kbd, 1, 1, do_kbd,
"read keyboard status",
- NULL
+ ""
);
diff --git a/board/renesas/sh7785lcr/rtl8169_mac.c b/board/renesas/sh7785lcr/rtl8169_mac.c
index 6d0bbc0..634efb4 100644
--- a/board/renesas/sh7785lcr/rtl8169_mac.c
+++ b/board/renesas/sh7785lcr/rtl8169_mac.c
@@ -325,7 +325,7 @@ U_BOOT_CMD(
setmac, 2, 1, do_set_mac,
"write MAC address for RTL8110SCL",
"\n"
- "setmac <mac address> - write MAC address for RTL8110SCL\n"
+ "setmac <mac address> - write MAC address for RTL8110SCL"
);
int do_print_mac(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
@@ -344,5 +344,5 @@ U_BOOT_CMD(
printmac, 1, 1, do_print_mac,
"print MAC address for RTL8110",
"\n"
- " - print MAC address for RTL8110\n"
+ " - print MAC address for RTL8110"
);
diff --git a/board/renesas/sh7785lcr/selfcheck.c b/board/renesas/sh7785lcr/selfcheck.c
index 6dbb784..e803b3c 100644
--- a/board/renesas/sh7785lcr/selfcheck.c
+++ b/board/renesas/sh7785lcr/selfcheck.c
@@ -168,5 +168,5 @@ U_BOOT_CMD(
"hwtest sm107 - output SM107 version\n"
"hwtest net - check RTL8110 ID\n"
"hwtest sata - check SiI3512 ID\n"
- "hwtest pci - output PCI slot device ID\n"
+ "hwtest pci - output PCI slot device ID"
);
diff --git a/board/renesas/sh7785lcr/sh7785lcr.c b/board/renesas/sh7785lcr/sh7785lcr.c
index 6bdf3c0..9948d04 100644
--- a/board/renesas/sh7785lcr/sh7785lcr.c
+++ b/board/renesas/sh7785lcr/sh7785lcr.c
@@ -82,6 +82,6 @@ U_BOOT_CMD(
pmb, 1, 1, do_pmb,
"pmb - PMB setting\n",
"\n"
- " - PMB setting for all SDRAM mapping\n"
+ " - PMB setting for all SDRAM mapping"
);
#endif
diff --git a/board/sandburst/common/ppc440gx_i2c.c b/board/sandburst/common/ppc440gx_i2c.c
index c1af70c..bc88e5a 100644
--- a/board/sandburst/common/ppc440gx_i2c.c
+++ b/board/sandburst/common/ppc440gx_i2c.c
@@ -501,7 +501,7 @@ int do_i2c1_probe(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
iprobe1, 1, 1, do_i2c1_probe,
"probe to discover valid I2C chip addresses",
- "\n -discover valid I2C chip addresses\n"
+ ""
);
#endif /* CONFIG_I2C_BUS1 */
diff --git a/board/sandburst/karef/karef.c b/board/sandburst/karef/karef.c
index b8ae68f..92f5247 100644
--- a/board/sandburst/karef/karef.c
+++ b/board/sandburst/karef/karef.c
@@ -611,7 +611,7 @@ int karefRecover(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
}
U_BOOT_CMD(kasetup, 1, 1, karefSetupVars,
- "Set environment to factory defaults", NULL);
+ "Set environment to factory defaults", "");
U_BOOT_CMD(karecover, 1, 1, karefRecover,
- "Set environment to allow for fs recovery", NULL);
+ "Set environment to allow for fs recovery", "");
diff --git a/board/sandburst/metrobox/metrobox.c b/board/sandburst/metrobox/metrobox.c
index fc136c8..27d7f74 100644
--- a/board/sandburst/metrobox/metrobox.c
+++ b/board/sandburst/metrobox/metrobox.c
@@ -577,7 +577,7 @@ int metroboxRecover(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
}
U_BOOT_CMD(mbsetup, 1, 1, metroboxSetupVars,
- "Set environment to factory defaults", NULL);
+ "Set environment to factory defaults", "");
U_BOOT_CMD(mbrecover, 1, 1, metroboxRecover,
- "Set environment to allow for fs recovery", NULL);
+ "Set environment to allow for fs recovery", "");
diff --git a/board/siemens/common/fpga.c b/board/siemens/common/fpga.c
index c9a93e1..4b45902 100644
--- a/board/siemens/common/fpga.c
+++ b/board/siemens/common/fpga.c
@@ -295,7 +295,7 @@ U_BOOT_CMD(
"access FPGA(s)",
"fpga status [name] - print FPGA status\n"
"fpga reset [name] - reset FPGA\n"
- "fpga load [name] addr - load FPGA configuration data\n"
+ "fpga load [name] addr - load FPGA configuration data"
);
#endif
diff --git a/board/siemens/pcu_e/pcu_e.c b/board/siemens/pcu_e/pcu_e.c
index f87d6bc..827578c 100644
--- a/board/siemens/pcu_e/pcu_e.c
+++ b/board/siemens/pcu_e/pcu_e.c
@@ -404,10 +404,10 @@ int do_puma (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
}
U_BOOT_CMD (puma, 4, 1, do_puma,
- "access PUMA FPGA",
- "status - print PUMA status\n"
- "puma load addr len - load PUMA configuration data\n");
-
+ "access PUMA FPGA",
+ "status - print PUMA status\n"
+ "puma load addr len - load PUMA configuration data"
+);
#endif
/* . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . */
diff --git a/board/ssv/common/cmd_sled.c b/board/ssv/common/cmd_sled.c
index 99ff507..449c1a4 100644
--- a/board/ssv/common/cmd_sled.c
+++ b/board/ssv/common/cmd_sled.c
@@ -157,6 +157,6 @@ int do_sled (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD (sled, 3, 0, do_sled,
"check and set status led",
- "sled [name [state]]\n" __NAME_STR " - state: on|off|blink\n");
+ "sled [name [state]]\n" __NAME_STR " - state: on|off|blink");
#endif
#endif /* CONFIG_STATUS_LED */
diff --git a/board/ssv/common/wd_pio.c b/board/ssv/common/wd_pio.c
index 9b38425..eaf1d25 100644
--- a/board/ssv/common/wd_pio.c
+++ b/board/ssv/common/wd_pio.c
@@ -154,7 +154,7 @@ U_BOOT_CMD(
"check and set watchdog",
"on - switch watchDog on\n"
"wd off - switch watchdog off\n"
- "wd - print current status\n"
+ "wd - print current status"
);
#endif
#endif /* CONFIG_HW_WATCHDOG */
diff --git a/board/tqc/tqm5200/cmd_stk52xx.c b/board/tqc/tqm5200/cmd_stk52xx.c
index 20632a7..e309beb 100644
--- a/board/tqc/tqm5200/cmd_stk52xx.c
+++ b/board/tqc/tqm5200/cmd_stk52xx.c
@@ -1201,21 +1201,21 @@ U_BOOT_CMD(
"sound square [duration] [freq] [channel]\n"
" - generate squarewave for 'duration' ms with frequency 'freq'\n"
" on left \"l\" or right \"r\" channel\n"
- "pcm1772 reg val\n"
+ "pcm1772 reg val"
);
U_BOOT_CMD(
wav , 3, 1, cmd_wav,
"play wav file",
"[addr] [bytes]\n"
- " - play wav file at address 'addr' with length 'bytes'\n"
+ " - play wav file at address 'addr' with length 'bytes'"
);
U_BOOT_CMD(
beep , 2, 1, cmd_beep,
"play short beep",
"[channel]\n"
- " - play short beep on \"l\"eft or \"r\"ight channel\n"
+ " - play short beep on \"l\"eft or \"r\"ight channel"
);
#endif /* CONFIG_STK52XX || CONFIG_FO300 */
@@ -1228,10 +1228,11 @@ U_BOOT_CMD(
"fkt can\n"
" - loopback plug for X83 required\n"
"fkt rs232 number\n"
- " - loopback plug(s) for X2 required\n"
+ " - loopback plug(s) for X2 required"
#ifndef CONFIG_TQM5200S
+ "\n"
"fkt backlight on/off\n"
- " - switch backlight on or off\n"
+ " - switch backlight on or off"
#endif /* !CONFIG_TQM5200S */
);
#elif defined(CONFIG_FO300)
@@ -1241,7 +1242,7 @@ U_BOOT_CMD(
"fkt can\n"
" - loopback plug for X16/X29 required\n"
"fkt rs232 number\n"
- " - loopback plug(s) for X21/X22 required\n"
+ " - loopback plug(s) for X21/X22 required"
);
#endif
#endif
diff --git a/board/tqc/tqm5200/cmd_tb5200.c b/board/tqc/tqm5200/cmd_tb5200.c
index b9c9e7e..578e716 100644
--- a/board/tqc/tqm5200/cmd_tb5200.c
+++ b/board/tqc/tqm5200/cmd_tb5200.c
@@ -91,13 +91,13 @@ int cmd_backlight(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
led , 2, 1, cmd_led,
"switch status LED on or off",
- "on/off\n"
+ "on/off"
);
U_BOOT_CMD(
backlight , 2, 1, cmd_backlight,
"switch backlight on or off",
- "on/off\n"
+ "on/off"
);
#endif /* CONFIG_STK52XX */
diff --git a/board/tqc/tqm8272/tqm8272.c b/board/tqc/tqm8272/tqm8272.c
index 5bc080f..92f74a3 100644
--- a/board/tqc/tqm8272/tqm8272.c
+++ b/board/tqc/tqm8272/tqm8272.c
@@ -867,7 +867,7 @@ int do_hwib_dump (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
hwib, 1, 1, do_hwib_dump,
"dump HWIB'",
- "\n"
+ ""
);
#ifdef CONFIG_SYS_UPDATE_FLASH_SIZE
diff --git a/board/trab/cmd_trab.c b/board/trab/cmd_trab.c
index 7e2a672..d0465fb 100644
--- a/board/trab/cmd_trab.c
+++ b/board/trab/cmd_trab.c
@@ -262,7 +262,7 @@ U_BOOT_CMD(
"\n"
" - start burn-in test application\n"
" The burn-in test could took a while to finish!\n"
- " The content of the onboard EEPROM is modified!\n"
+ " The content of the onboard EEPROM is modified!"
);
@@ -295,7 +295,7 @@ U_BOOT_CMD(
"read dip switch on TRAB",
"\n"
" - read state of dip switch (S1) on TRAB board\n"
- " read sequence: 1-2-3-4; ON=1; OFF=0; e.g.: \"0100\"\n"
+ " read sequence: 1-2-3-4; ON=1; OFF=0; e.g.: \"0100\""
);
@@ -323,7 +323,7 @@ U_BOOT_CMD(
vcc5v, 1, 1, do_vcc5v,
"read VCC5V on TRAB",
"\n"
- " - read actual value of voltage VCC5V\n"
+ " - read actual value of voltage VCC5V"
);
@@ -347,7 +347,7 @@ int do_contact_temp (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
c_temp, 1, 1, do_contact_temp,
"read contact temperature on TRAB",
- "\n"
+ ""
" - reads the onboard temperature (=contact temperature)\n"
);
@@ -401,7 +401,7 @@ U_BOOT_CMD(
"print burn in status on TRAB",
"\n"
" - prints the status variables of the last burn in test\n"
- " stored in the onboard EEPROM on TRAB board\n"
+ " stored in the onboard EEPROM on TRAB board"
);
static int read_dip (void)
@@ -890,7 +890,7 @@ U_BOOT_CMD(
"delay\n"
" - contact temperature [1/100 C] is printed endlessly to console\n"
" <delay> specifies the seconds to wait between two measurements\n"
- " For each measurment a timestamp is printeted\n"
+ " For each measurment a timestamp is printeted"
);
#endif
diff --git a/board/trab/trab.c b/board/trab/trab.c
index 5359065..ddf6abf 100644
--- a/board/trab/trab.c
+++ b/board/trab/trab.c
@@ -323,7 +323,7 @@ int do_kbd (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
kbd, 1, 1, do_kbd,
"read keyboard status",
- NULL
+ ""
);
#ifdef CONFIG_MODEM_SUPPORT
diff --git a/board/trizepsiv/eeprom.c b/board/trizepsiv/eeprom.c
index 9fa7aef..b6b16bf 100644
--- a/board/trizepsiv/eeprom.c
+++ b/board/trizepsiv/eeprom.c
@@ -81,4 +81,5 @@ U_BOOT_CMD(
"\tdm9000ee read \n"
"\tword:\t\t00-02 : MAC Address\n"
"\t\t\t03-07 : DM9000 Configuration\n"
- "\t\t\t08-63 : User data\n");
+ "\t\t\t08-63 : User data"
+);
diff --git a/board/w7o/cmd_vpd.c b/board/w7o/cmd_vpd.c
index eaec940..013fc79 100644
--- a/board/w7o/cmd_vpd.c
+++ b/board/w7o/cmd_vpd.c
@@ -60,7 +60,7 @@ U_BOOT_CMD(
vpd, 2, 1, do_vpd,
"Read Vital Product Data",
"[dev_addr]\n"
- " - Read VPD Data from default address, or device address 'dev_addr'.\n"
+ " - Read VPD Data from default address, or device address 'dev_addr'."
);
#endif
diff --git a/board/zeus/update.c b/board/zeus/update.c
index ce1f34f..c8487e5 100644
--- a/board/zeus/update.c
+++ b/board/zeus/update.c
@@ -99,7 +99,7 @@ int do_update_boot_eeprom(cmd_tbl_t* cmdtp, int flag, int argc, char* argv[])
U_BOOT_CMD (
update_boot_eeprom, 1, 1, do_update_boot_eeprom,
"update boot eeprom content",
- NULL
+ ""
);
#endif
diff --git a/board/zeus/zeus.c b/board/zeus/zeus.c
index 3f329c2..9bc390f 100644
--- a/board/zeus/zeus.c
+++ b/board/zeus/zeus.c
@@ -328,7 +328,7 @@ int do_set_default(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
setdef, 4, 1, do_set_default,
"write board-specific values to EEPROM (ethaddr...)",
- "ethaddr eth1addr serial#\n - write board-specific values to EEPROM\n"
+ "ethaddr eth1addr serial#\n - write board-specific values to EEPROM"
);
static inline int sw_reset_pressed(void)
@@ -419,7 +419,7 @@ int do_chkreset(cmd_tbl_t* cmdtp, int flag, int argc, char* argv[])
U_BOOT_CMD (
chkreset, 1, 1, do_chkreset,
"Check for status of SW-reset button and act accordingly",
- NULL
+ ""
);
#if defined(CONFIG_POST)
diff --git a/common/cmd_ambapp.c b/common/cmd_ambapp.c
index 06531f1..bb20ab5 100644
--- a/common/cmd_ambapp.c
+++ b/common/cmd_ambapp.c
@@ -273,6 +273,7 @@ int ambapp_init_reloc(void)
}
U_BOOT_CMD(ambapp, 1, 1, do_ambapp_print,
- "list AMBA Plug&Play information",
- "ambapp\n"
- " - lists AMBA (AHB & APB) Plug&Play devices present on the system\n");
+ "list AMBA Plug&Play information",
+ "ambapp\n"
+ " - lists AMBA (AHB & APB) Plug&Play devices present on the system"
+);
diff --git a/common/cmd_bdinfo.c b/common/cmd_bdinfo.c
index b230924..11c1547 100644
--- a/common/cmd_bdinfo.c
+++ b/common/cmd_bdinfo.c
@@ -384,5 +384,5 @@ static void print_str(const char *name, const char *str)
U_BOOT_CMD(
bdinfo, 1, 1, do_bdinfo,
"print Board Info structure",
- NULL
+ ""
);
diff --git a/common/cmd_bedbug.c b/common/cmd_bedbug.c
index cd9e720..8be1c25 100644
--- a/common/cmd_bedbug.c
+++ b/common/cmd_bedbug.c
@@ -108,7 +108,7 @@ int do_bedbug_dis (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD (ds, 3, 1, do_bedbug_dis,
"disassemble memory",
- "ds <address> [# instructions]\n");
+ "ds <address> [# instructions]");
/* ======================================================================
* Entry point from the interpreter to the assembler. Assembles
@@ -160,7 +160,7 @@ int do_bedbug_asm (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
} /* do_bedbug_asm */
U_BOOT_CMD (as, 2, 0, do_bedbug_asm,
- "assemble memory", "as <address>\n");
+ "assemble memory", "as <address>");
/* ======================================================================
* Used to set a break point from the interpreter. Simply calls into the
@@ -181,7 +181,7 @@ U_BOOT_CMD (break, 3, 0, do_bedbug_break,
" - Set or clear a breakpoint\n"
"break <address> - Break at an address\n"
"break off <bp#> - Disable breakpoint.\n"
- "break show - List breakpoints.\n");
+ "break show - List breakpoints.");
/* ======================================================================
* Called from the debug interrupt routine. Simply calls the CPU-specific
@@ -278,7 +278,7 @@ int do_bedbug_continue (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD (continue, 1, 0, do_bedbug_continue,
"continue from a breakpoint",
- " - continue from a breakpoint.\n");
+ "");
/* ======================================================================
* Interpreter command to continue to the next instruction, stepping into
@@ -309,7 +309,7 @@ int do_bedbug_step (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD (step, 1, 1, do_bedbug_step,
"single step execution.",
- " - single step execution.\n");
+ "");
/* ======================================================================
* Interpreter command to continue to the next instruction, stepping over
@@ -340,7 +340,7 @@ int do_bedbug_next (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD (next, 1, 1, do_bedbug_next,
"single step execution, stepping over subroutines.",
- " - single step execution, stepping over subroutines.\n");
+ "");
/* ======================================================================
* Interpreter command to print the current stack. This assumes an EABI
@@ -385,7 +385,7 @@ int do_bedbug_stack (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD (where, 1, 1, do_bedbug_stack,
"Print the running stack.",
- " - Print the running stack.\n");
+ "");
/* ======================================================================
* Interpreter command to dump the registers. Calls the CPU-specific
@@ -405,7 +405,7 @@ int do_bedbug_rdump (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
} /* do_bedbug_rdump */
U_BOOT_CMD (rdump, 1, 1, do_bedbug_rdump,
- "Show registers.", " - Show registers.\n");
+ "Show registers.", "");
/* ====================================================================== */
diff --git a/common/cmd_bmp.c b/common/cmd_bmp.c
index abbb070..fc8462e 100644
--- a/common/cmd_bmp.c
+++ b/common/cmd_bmp.c
@@ -141,7 +141,7 @@ U_BOOT_CMD(
bmp, 5, 1, do_bmp,
"manipulate BMP image data",
"info <imageAddr> - display image info\n"
- "bmp display <imageAddr> [x y] - display image at x,y\n"
+ "bmp display <imageAddr> [x y] - display image at x,y"
);
/*
diff --git a/common/cmd_boot.c b/common/cmd_boot.c
index efc1a02..bfc1db2 100644
--- a/common/cmd_boot.c
+++ b/common/cmd_boot.c
@@ -66,7 +66,7 @@ U_BOOT_CMD(
go, CONFIG_SYS_MAXARGS, 1, do_go,
"start application at address 'addr'",
"addr [arg ...]\n - start application at address 'addr'\n"
- " passing 'arg' as arguments\n"
+ " passing 'arg' as arguments"
);
extern int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
@@ -74,5 +74,5 @@ extern int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
U_BOOT_CMD(
reset, 1, 0, do_reset,
"Perform RESET of the CPU",
- NULL
+ ""
);
diff --git a/common/cmd_bootldr.c b/common/cmd_bootldr.c
index 48d113f..b2a8b0e 100644
--- a/common/cmd_bootldr.c
+++ b/common/cmd_bootldr.c
@@ -170,4 +170,5 @@ int do_bootldr(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(bootldr, 2, 0, do_bootldr,
"boot ldr image from memory",
"[addr]\n"
- " - boot ldr image stored in memory\n");
+ ""
+);
diff --git a/common/cmd_bootm.c b/common/cmd_bootm.c
index bd1813a..367d5a7 100644
--- a/common/cmd_bootm.c
+++ b/common/cmd_bootm.c
@@ -948,7 +948,7 @@ U_BOOT_CMD(
"\tbdt - OS specific bd_t processing\n"
"\tcmdline - OS specific command line processing/setup\n"
"\tprep - OS specific prep before relocation or go\n"
- "\tgo - start OS\n"
+ "\tgo - start OS"
);
/*******************************************************************/
@@ -973,14 +973,14 @@ int do_bootd (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
boot, 1, 1, do_bootd,
"boot default, i.e., run 'bootcmd'",
- NULL
+ ""
);
/* keep old command name "bootd" for backward compatibility */
U_BOOT_CMD(
bootd, 1, 1, do_bootd,
"boot default, i.e., run 'bootcmd'",
- NULL
+ ""
);
#endif
@@ -1068,7 +1068,7 @@ U_BOOT_CMD(
"addr [addr ...]\n"
" - print header information for application image starting at\n"
" address 'addr' in memory; this includes verification of the\n"
- " image contents (magic number, header and payload checksums)\n"
+ " image contents (magic number, header and payload checksums)"
);
#endif
@@ -1135,7 +1135,7 @@ U_BOOT_CMD(
"list all images found in flash",
"\n"
" - Prints information about all images found at sector\n"
- " boundaries in flash.\n"
+ " boundaries in flash."
);
#endif
diff --git a/common/cmd_cache.c b/common/cmd_cache.c
index c0f2cba..0dfa336 100644
--- a/common/cmd_cache.c
+++ b/common/cmd_cache.c
@@ -99,14 +99,14 @@ U_BOOT_CMD(
icache, 2, 1, do_icache,
"enable or disable instruction cache",
"[on, off]\n"
- " - enable or disable instruction cache\n"
+ " - enable or disable instruction cache"
);
U_BOOT_CMD(
dcache, 2, 1, do_dcache,
"enable or disable data cache",
"[on, off]\n"
- " - enable or disable data (writethrough) cache\n"
+ " - enable or disable data (writethrough) cache"
);
#endif
diff --git a/common/cmd_cplbinfo.c b/common/cmd_cplbinfo.c
index 56e70d6..1a044d2 100644
--- a/common/cmd_cplbinfo.c
+++ b/common/cmd_cplbinfo.c
@@ -55,5 +55,5 @@ int do_cplbinfo(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(cplbinfo, 1, 0, do_cplbinfo,
"display current CPLB tables",
- "\n"
- " - display current CPLB tables\n");
+ ""
+);
diff --git a/common/cmd_dataflash_mmc_mux.c b/common/cmd_dataflash_mmc_mux.c
index 4b2cf1c..97e303e 100644
--- a/common/cmd_dataflash_mmc_mux.c
+++ b/common/cmd_dataflash_mmc_mux.c
@@ -61,5 +61,5 @@ U_BOOT_CMD(
dataflash_mmc_mux, 2, 1, do_dataflash_mmc_mux,
"dataflash_mmc_mux\t- enable or disable MMC or SPI\n",
"[mmc, spi]\n"
- " - enable or disable MMC or SPI\n"
+ " - enable or disable MMC or SPI"
);
diff --git a/common/cmd_date.c b/common/cmd_date.c
index 3d78be2..b69e935 100644
--- a/common/cmd_date.c
+++ b/common/cmd_date.c
@@ -218,5 +218,5 @@ U_BOOT_CMD(
"[MMDDhhmm[[CC]YY][.ss]]\ndate reset\n"
" - without arguments: print date & time\n"
" - with numeric argument: set the system date & time\n"
- " - with 'reset' argument: reset the RTC\n"
+ " - with 'reset' argument: reset the RTC"
);
diff --git a/common/cmd_dcr.c b/common/cmd_dcr.c
index 7aed06c..4f23b8d 100644
--- a/common/cmd_dcr.c
+++ b/common/cmd_dcr.c
@@ -224,22 +224,22 @@ int do_setidcr (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
getdcr, 2, 1, do_getdcr,
"Get an AMCC PPC 4xx DCR's value",
- "dcrn - return a DCR's value.\n"
+ "dcrn - return a DCR's value."
);
U_BOOT_CMD(
setdcr, 2, 1, do_setdcr,
"Set an AMCC PPC 4xx DCR's value",
- "dcrn - set a DCR's value.\n"
+ "dcrn - set a DCR's value."
);
U_BOOT_CMD(
getidcr, 3, 1, do_getidcr,
"Get a register value via indirect DCR addressing",
- "adr_dcrn[.dat_dcrn] offset - write offset to adr_dcrn, read value from dat_dcrn.\n"
+ "adr_dcrn[.dat_dcrn] offset - write offset to adr_dcrn, read value from dat_dcrn."
);
U_BOOT_CMD(
setidcr, 4, 1, do_setidcr,
"Set a register value via indirect DCR addressing",
- "adr_dcrn[.dat_dcrn] offset value - write offset to adr_dcrn, write value to dat_dcrn.\n"
+ "adr_dcrn[.dat_dcrn] offset value - write offset to adr_dcrn, write value to dat_dcrn."
);
diff --git a/common/cmd_df.c b/common/cmd_df.c
index d64f900..7f957fe 100644
--- a/common/cmd_df.c
+++ b/common/cmd_df.c
@@ -34,4 +34,4 @@ usage:
U_BOOT_CMD(
sf, 2, 1, do_serial_flash,
"Serial flash sub-system",
- "probe [bus:]cs - init flash device on given SPI bus and CS\n")
+ "probe [bus:]cs - init flash device on given SPI bus and CS")
diff --git a/common/cmd_diag.c b/common/cmd_diag.c
index c2a6175..0436c49 100644
--- a/common/cmd_diag.c
+++ b/common/cmd_diag.c
@@ -72,5 +72,5 @@ U_BOOT_CMD(
" - print information about specified tests\n"
"diag run - run all available tests\n"
"diag run [test1 [test2]]\n"
- " - run specified tests\n"
+ " - run specified tests"
);
diff --git a/common/cmd_display.c b/common/cmd_display.c
index 4102424..3422395 100644
--- a/common/cmd_display.c
+++ b/common/cmd_display.c
@@ -74,5 +74,5 @@ U_BOOT_CMD(
"display string on dot matrix display",
"[<string>]\n"
" - with <string> argument: display <string> on dot matrix display\n"
- " - without arguments: clear dot matrix display\n"
+ " - without arguments: clear dot matrix display"
);
diff --git a/common/cmd_doc.c b/common/cmd_doc.c
index 3385c67..5cc90f0 100644
--- a/common/cmd_doc.c
+++ b/common/cmd_doc.c
@@ -202,7 +202,7 @@ U_BOOT_CMD(
"doc write addr off size - read/write `size'"
" bytes starting at offset `off'\n"
" to/from memory address `addr'\n"
- "doc erase off size - erase `size' bytes of DOC from offset `off'\n"
+ "doc erase off size - erase `size' bytes of DOC from offset `off'"
);
int do_docboot (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
@@ -342,7 +342,7 @@ int do_docboot (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
docboot, 4, 1, do_docboot,
"boot from DOC device",
- "loadAddr dev\n"
+ "loadAddr dev"
);
int doc_rw (struct DiskOnChip* this, int cmd,
diff --git a/common/cmd_dtt.c b/common/cmd_dtt.c
index 7783c88..3cfd36e 100644
--- a/common/cmd_dtt.c
+++ b/common/cmd_dtt.c
@@ -55,6 +55,6 @@ int do_dtt (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
dtt, 1, 1, do_dtt,
- "Digital Thermometer and Thermostat",
- " - Read temperature from digital thermometer and thermostat.\n"
+ "Read temperature from Digital Thermometer and Thermostat",
+ ""
);
diff --git a/common/cmd_eeprom.c b/common/cmd_eeprom.c
index f749087..102efaf 100644
--- a/common/cmd_eeprom.c
+++ b/common/cmd_eeprom.c
@@ -424,7 +424,7 @@ U_BOOT_CMD(
"EEPROM sub-system",
"read devaddr addr off cnt\n"
"eeprom write devaddr addr off cnt\n"
- " - read/write `cnt' bytes from `devaddr` EEPROM at offset `off'\n"
+ " - read/write `cnt' bytes from `devaddr` EEPROM at offset `off'"
);
#else /* One EEPROM */
U_BOOT_CMD(
@@ -432,7 +432,7 @@ U_BOOT_CMD(
"EEPROM sub-system",
"read addr off cnt\n"
"eeprom write addr off cnt\n"
- " - read/write `cnt' bytes at EEPROM offset `off'\n"
+ " - read/write `cnt' bytes at EEPROM offset `off'"
);
#endif /* CONFIG_SYS_I2C_MULTI_EEPROMS */
diff --git a/common/cmd_elf.c b/common/cmd_elf.c
index 83e7589..abec7dd 100644
--- a/common/cmd_elf.c
+++ b/common/cmd_elf.c
@@ -313,11 +313,11 @@ unsigned long load_elf_image (unsigned long addr)
U_BOOT_CMD(
bootelf, 2, 0, do_bootelf,
"Boot from an ELF image in memory",
- " [address] - load address of ELF image.\n"
+ " [address] - load address of ELF image."
);
U_BOOT_CMD(
bootvx, 2, 0, do_bootvx,
"Boot vxWorks from an ELF image",
- " [address] - load address of vxWorks ELF image.\n"
+ " [address] - load address of vxWorks ELF image."
);
diff --git a/common/cmd_ext2.c b/common/cmd_ext2.c
index 923b355..6ee60c6 100644
--- a/common/cmd_ext2.c
+++ b/common/cmd_ext2.c
@@ -118,7 +118,7 @@ U_BOOT_CMD(
ext2ls, 4, 1, do_ext2ls,
"list files in a directory (default /)",
"<interface> <dev[:part]> [directory]\n"
- " - list files from 'dev' on 'interface' in a 'directory'\n"
+ " - list files from 'dev' on 'interface' in a 'directory'"
);
/******************************************************************************
@@ -256,5 +256,5 @@ U_BOOT_CMD(
"load binary file from a Ext2 filesystem",
"<interface> <dev[:part]> [addr] [filename] [bytes]\n"
" - load binary file 'filename' from 'dev' on 'interface'\n"
- " to address 'addr' from ext2 filesystem\n"
+ " to address 'addr' from ext2 filesystem"
);
diff --git a/common/cmd_fat.c b/common/cmd_fat.c
index 4a26b80..f3089a2 100644
--- a/common/cmd_fat.c
+++ b/common/cmd_fat.c
@@ -91,7 +91,7 @@ U_BOOT_CMD(
"load binary file from a dos filesystem",
"<interface> <dev[:part]> <addr> <filename> [bytes]\n"
" - load binary file 'filename' from 'dev' on 'interface'\n"
- " to address 'addr' from dos filesystem\n"
+ " to address 'addr' from dos filesystem"
);
int do_fat_ls (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
@@ -138,7 +138,7 @@ U_BOOT_CMD(
fatls, 4, 1, do_fat_ls,
"list files in a directory (default /)",
"<interface> <dev[:part]> [directory]\n"
- " - list files from 'dev' on 'interface' in a 'directory'\n"
+ " - list files from 'dev' on 'interface' in a 'directory'"
);
int do_fat_fsinfo (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
@@ -176,7 +176,7 @@ U_BOOT_CMD(
fatinfo, 3, 1, do_fat_fsinfo,
"print information about filesystem",
"<interface> <dev[:part]>\n"
- " - print information about filesystem from 'dev' on 'interface'\n"
+ " - print information about filesystem from 'dev' on 'interface'"
);
#ifdef NOT_IMPLEMENTED_YET
diff --git a/common/cmd_fdc.c b/common/cmd_fdc.c
index c043b97..8e18c71 100644
--- a/common/cmd_fdc.c
+++ b/common/cmd_fdc.c
@@ -903,6 +903,6 @@ int do_fdcboot (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
fdcboot, 3, 1, do_fdcboot,
"boot from floppy device",
- "loadAddr drive\n"
+ "loadAddr drive"
);
#endif
diff --git a/common/cmd_fdos.c b/common/cmd_fdos.c
index bcf98d9..3cc6586 100644
--- a/common/cmd_fdos.c
+++ b/common/cmd_fdos.c
@@ -143,11 +143,11 @@ int do_fdosls(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
fdosboot, 3, 0, do_fdosboot,
"boot from a dos floppy file",
- "[loadAddr] [filename]\n"
+ "[loadAddr] [filename]"
);
U_BOOT_CMD(
fdosls, 2, 0, do_fdosls,
"list files in a directory",
- "[directory]\n"
+ "[directory]"
);
diff --git a/common/cmd_fdt.c b/common/cmd_fdt.c
index 0947b72..8683772 100644
--- a/common/cmd_fdt.c
+++ b/common/cmd_fdt.c
@@ -840,5 +840,5 @@ U_BOOT_CMD(
"fdt chosen [<start> <end>] - Add/update the /chosen branch in the tree\n"
" <start>/<end> - initrd start/end addr\n"
"NOTE: Dereference aliases by omiting the leading '/', "
- "e.g. fdt print ethernet0.\n"
+ "e.g. fdt print ethernet0."
);
diff --git a/common/cmd_flash.c b/common/cmd_flash.c
index f1f3517..9f27ab0 100644
--- a/common/cmd_flash.c
+++ b/common/cmd_flash.c
@@ -712,7 +712,7 @@ U_BOOT_CMD(
flinfo, 2, 1, do_flinfo,
"print FLASH memory information",
"\n - print information for all FLASH memory banks\n"
- "flinfo N\n - print information for FLASH memory bank # N\n"
+ "flinfo N\n - print information for FLASH memory bank # N"
);
U_BOOT_CMD(
@@ -726,7 +726,7 @@ U_BOOT_CMD(
"erase N:SF[-SL]\n - erase sectors SF-SL in FLASH bank # N\n"
"erase bank N\n - erase FLASH bank # N\n"
TMP_ERASE
- "erase all\n - erase all FLASH banks\n"
+ "erase all\n - erase all FLASH banks"
);
U_BOOT_CMD(
@@ -751,7 +751,7 @@ U_BOOT_CMD(
" - make sectors SF-SL writable in FLASH bank # N\n"
"protect off bank N\n - make FLASH bank # N writable\n"
TMP_PROT_OFF
- "protect off all\n - make all FLASH banks writable\n"
+ "protect off all\n - make all FLASH banks writable"
);
#undef TMP_ERASE
diff --git a/common/cmd_fpga.c b/common/cmd_fpga.c
index 362bffd..2e017b8 100644
--- a/common/cmd_fpga.c
+++ b/common/cmd_fpga.c
@@ -357,9 +357,10 @@ U_BOOT_CMD (fpga, 6, 1, do_fpga,
"\tload\tLoad device from memory buffer\n"
"\tloadb\tLoad device from bitstream buffer (Xilinx devices only)\n"
"\tloadmk\tLoad device generated with mkimage\n"
- "\tdump\tLoad device to memory buffer\n"
+ "\tdump\tLoad device to memory buffer"
#if defined(CONFIG_FIT)
+ "\n"
"\tFor loadmk operating on FIT format uImage address must include\n"
- "\tsubimage unit name in the form of addr:<subimg_uname>\n"
+ "\tsubimage unit name in the form of addr:<subimg_uname>"
#endif
);
diff --git a/common/cmd_i2c.c b/common/cmd_i2c.c
index b922b96..ae26845 100644
--- a/common/cmd_i2c.c
+++ b/common/cmd_i2c.c
@@ -1315,9 +1315,10 @@ U_BOOT_CMD(
"i2c crc32 chip address[.0, .1, .2] count - compute CRC32 checksum\n"
"i2c probe - show devices on the I2C bus\n"
"i2c reset - re-init the I2C Controller\n"
- "i2c loop chip address[.0, .1, .2] [# of objects] - looping read of device\n"
+ "i2c loop chip address[.0, .1, .2] [# of objects] - looping read of device"
#if defined(CONFIG_CMD_SDRAM)
- "i2c sdram chip - print SDRAM configuration information\n"
+ "\n"
+ "i2c sdram chip - print SDRAM configuration information"
#endif
);
diff --git a/common/cmd_ide.c b/common/cmd_ide.c
index d86bf37..feda773 100644
--- a/common/cmd_ide.c
+++ b/common/cmd_ide.c
@@ -2108,11 +2108,11 @@ U_BOOT_CMD(
"ide read addr blk# cnt\n"
"ide write addr blk# cnt - read/write `cnt'"
" blocks starting at block `blk#'\n"
- " to/from memory address `addr'\n"
+ " to/from memory address `addr'"
);
U_BOOT_CMD(
diskboot, 3, 1, do_diskboot,
"boot from IDE device",
- "loadAddr dev:part\n"
+ "loadAddr dev:part"
);
diff --git a/common/cmd_immap.c b/common/cmd_immap.c
index c8367f0..37e6058 100644
--- a/common/cmd_immap.c
+++ b/common/cmd_immap.c
@@ -615,39 +615,39 @@ do_mccinfo (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
siuinfo, 1, 1, do_siuinfo,
"print System Interface Unit (SIU) registers",
- NULL
+ ""
);
U_BOOT_CMD(
memcinfo, 1, 1, do_memcinfo,
"print Memory Controller registers",
- NULL
+ ""
);
U_BOOT_CMD(
sitinfo, 1, 1, do_sitinfo,
"print System Integration Timers (SIT) registers",
- NULL
+ ""
);
#ifdef CONFIG_8260
U_BOOT_CMD(
icinfo, 1, 1, do_icinfo,
"print Interrupt Controller registers",
- NULL
+ ""
);
#endif
U_BOOT_CMD(
carinfo, 1, 1, do_carinfo,
"print Clocks and Reset registers",
- NULL
+ ""
);
U_BOOT_CMD(
iopinfo, 1, 1, do_iopinfo,
"print I/O Port registers",
- NULL
+ ""
);
U_BOOT_CMD(
@@ -659,62 +659,61 @@ U_BOOT_CMD(
U_BOOT_CMD(
dmainfo, 1, 1, do_dmainfo,
"print SDMA/IDMA registers",
- NULL
+ ""
);
U_BOOT_CMD(
fccinfo, 1, 1, do_fccinfo,
"print FCC registers",
- NULL
+ ""
);
U_BOOT_CMD(
brginfo, 1, 1, do_brginfo,
"print Baud Rate Generator (BRG) registers",
- NULL
+ ""
);
U_BOOT_CMD(
i2cinfo, 1, 1, do_i2cinfo,
"print I2C registers",
- NULL
+ ""
);
U_BOOT_CMD(
sccinfo, 1, 1, do_sccinfo,
"print SCC registers",
- NULL
+ ""
);
U_BOOT_CMD(
smcinfo, 1, 1, do_smcinfo,
"print SMC registers",
- NULL
+ ""
);
U_BOOT_CMD(
spiinfo, 1, 1, do_spiinfo,
"print Serial Peripheral Interface (SPI) registers",
- NULL
+ ""
);
U_BOOT_CMD(
muxinfo, 1, 1, do_muxinfo,
"print CPM Multiplexing registers",
- NULL
+ ""
);
U_BOOT_CMD(
siinfo, 1, 1, do_siinfo,
"print Serial Interface (SI) registers",
- NULL
+ ""
);
U_BOOT_CMD(
mccinfo, 1, 1, do_mccinfo,
"print MCC registers",
- NULL
+ ""
);
-
#endif
diff --git a/common/cmd_irq.c b/common/cmd_irq.c
index a21aede..4604a5a 100644
--- a/common/cmd_irq.c
+++ b/common/cmd_irq.c
@@ -45,6 +45,5 @@ int do_interrupts(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
interrupts, 5, 0, do_interrupts,
"enable or disable interrupts",
- "[on, off]\n"
- " - enable or disable interrupts\n"
+ "[on, off]"
);
diff --git a/common/cmd_itest.c b/common/cmd_itest.c
index 309b08b..5b301bf 100644
--- a/common/cmd_itest.c
+++ b/common/cmd_itest.c
@@ -191,5 +191,5 @@ int do_itest ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[] )
U_BOOT_CMD(
itest, 4, 0, do_itest,
"return true/false on integer compare",
- "[.b, .w, .l, .s] [*]value1 <op> [*]value2\n"
+ "[.b, .w, .l, .s] [*]value1 <op> [*]value2"
);
diff --git a/common/cmd_jffs2.c b/common/cmd_jffs2.c
index 3bb6c3c..4db4a83 100644
--- a/common/cmd_jffs2.c
+++ b/common/cmd_jffs2.c
@@ -636,18 +636,17 @@ U_BOOT_CMD(
"load binary file from a filesystem image",
"[ off ] [ filename ]\n"
" - load binary file from flash bank\n"
- " with offset 'off'\n"
+ " with offset 'off'"
);
U_BOOT_CMD(
ls, 2, 1, do_jffs2_ls,
"list files in a directory (default /)",
- "[ directory ]\n"
- " - list files in a directory.\n"
+ "[ directory ]"
);
U_BOOT_CMD(
fsinfo, 1, 1, do_jffs2_fsinfo,
"print information about filesystems",
- " - print information about filesystems\n"
+ ""
);
/***************************************************/
diff --git a/common/cmd_license.c b/common/cmd_license.c
index c3c3496..141215b 100644
--- a/common/cmd_license.c
+++ b/common/cmd_license.c
@@ -53,7 +53,8 @@ int do_license(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
}
U_BOOT_CMD(license, 1, 1, do_license,
- "print GPL license text",
- NULL);
+ "print GPL license text",
+ ""
+);
#endif /* CONFIG_CMD_LICENSE */
diff --git a/common/cmd_load.c b/common/cmd_load.c
index 2b5a66d..73fbf74 100644
--- a/common/cmd_load.c
+++ b/common/cmd_load.c
@@ -1049,7 +1049,7 @@ U_BOOT_CMD(
"load S-Record file over serial line",
"[ off ] [ baud ]\n"
" - load S-Record file over serial line"
- " with offset 'off' and baudrate 'baud'\n"
+ " with offset 'off' and baudrate 'baud'"
);
#else /* ! CONFIG_SYS_LOADS_BAUD_CHANGE */
@@ -1057,7 +1057,7 @@ U_BOOT_CMD(
loads, 2, 0, do_load_serial,
"load S-Record file over serial line",
"[ off ]\n"
- " - load S-Record file over serial line with offset 'off'\n"
+ " - load S-Record file over serial line with offset 'off'"
);
#endif /* CONFIG_SYS_LOADS_BAUD_CHANGE */
@@ -1073,14 +1073,14 @@ U_BOOT_CMD(
"save S-Record file over serial line",
"[ off ] [size] [ baud ]\n"
" - save S-Record file over serial line"
- " with offset 'off', size 'size' and baudrate 'baud'\n"
+ " with offset 'off', size 'size' and baudrate 'baud'"
);
#else /* ! CONFIG_SYS_LOADS_BAUD_CHANGE */
U_BOOT_CMD(
saves, 3, 0, do_save_serial,
"save S-Record file over serial line",
"[ off ] [size]\n"
- " - save S-Record file over serial line with offset 'off' and size 'size'\n"
+ " - save S-Record file over serial line with offset 'off' and size 'size'"
);
#endif /* CONFIG_SYS_LOADS_BAUD_CHANGE */
#endif
@@ -1093,7 +1093,7 @@ U_BOOT_CMD(
"load binary file over serial line (kermit mode)",
"[ off ] [ baud ]\n"
" - load binary file over serial line"
- " with offset 'off' and baudrate 'baud'\n"
+ " with offset 'off' and baudrate 'baud'"
);
U_BOOT_CMD(
@@ -1101,7 +1101,7 @@ U_BOOT_CMD(
"load binary file over serial line (ymodem mode)",
"[ off ] [ baud ]\n"
" - load binary file over serial line"
- " with offset 'off' and baudrate 'baud'\n"
+ " with offset 'off' and baudrate 'baud'"
);
#endif
@@ -1130,8 +1130,8 @@ int do_hwflow (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
hwflow, 2, 0, do_hwflow,
- "turn the harwdare flow control on/off",
- "[on|off]\n - change RTS/CTS hardware flow control over serial line\n"
+ "turn RTS/CTS hardware flow control in serial line on/off",
+ "[on|off]"
);
#endif
diff --git a/common/cmd_log.c b/common/cmd_log.c
index a03835d..d422d9f 100644
--- a/common/cmd_log.c
+++ b/common/cmd_log.c
@@ -256,7 +256,7 @@ U_BOOT_CMD(
"info - show pointer details\n"
"log reset - clear contents\n"
"log show - show contents\n"
- "log append <msg> - append <msg> to the logbuffer\n"
+ "log append <msg> - append <msg> to the logbuffer"
);
static int logbuff_printk(const char *line)
diff --git a/common/cmd_mac.c b/common/cmd_mac.c
index cf601e4..20403da 100644
--- a/common/cmd_mac.c
+++ b/common/cmd_mac.c
@@ -44,20 +44,6 @@ U_BOOT_CMD(
" - program date\n"
"mac ports\n"
" - program the number of ports\n"
- "mac 0\n"
- " - program the MAC address for port 0\n"
- "mac 1\n"
- " - program the MAC address for port 1\n"
- "mac 2\n"
- " - program the MAC address for port 2\n"
- "mac 3\n"
- " - program the MAC address for port 3\n"
- "mac 4\n"
- " - program the MAC address for port 4\n"
- "mac 5\n"
- " - program the MAC address for port 5\n"
- "mac 6\n"
- " - program the MAC address for port 6\n"
- "mac 7\n"
- " - program the MAC address for port 7\n"
+ "mac X\n"
+ " - program the MAC address for port X [X=0...7]"
);
diff --git a/common/cmd_mem.c b/common/cmd_mem.c
index 2d4fc2a..cdf8c79 100644
--- a/common/cmd_mem.c
+++ b/common/cmd_mem.c
@@ -1172,39 +1172,39 @@ int do_unzip ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
md, 3, 1, do_mem_md,
"memory display",
- "[.b, .w, .l] address [# of objects]\n - memory display\n"
+ "[.b, .w, .l] address [# of objects]"
);
U_BOOT_CMD(
mm, 2, 1, do_mem_mm,
- "memory modify (auto-incrementing)",
- "[.b, .w, .l] address\n" " - memory modify, auto increment address\n"
+ "memory modify (auto-incrementing address)",
+ "[.b, .w, .l] address"
);
U_BOOT_CMD(
nm, 2, 1, do_mem_nm,
"memory modify (constant address)",
- "[.b, .w, .l] address\n - memory modify, read and keep address\n"
+ "[.b, .w, .l] address"
);
U_BOOT_CMD(
mw, 4, 1, do_mem_mw,
"memory write (fill)",
- "[.b, .w, .l] address value [count]\n - write memory\n"
+ "[.b, .w, .l] address value [count]"
);
U_BOOT_CMD(
cp, 4, 1, do_mem_cp,
"memory copy",
- "[.b, .w, .l] source target count\n - copy memory\n"
+ "[.b, .w, .l] source target count"
);
U_BOOT_CMD(
cmp, 4, 1, do_mem_cmp,
"memory compare",
- "[.b, .w, .l] addr1 addr2 count\n - compare memory\n"
+ "[.b, .w, .l] addr1 addr2 count"
);
#ifndef CONFIG_CRC32_VERIFY
@@ -1212,7 +1212,7 @@ U_BOOT_CMD(
U_BOOT_CMD(
crc32, 4, 1, do_mem_crc,
"checksum calculation",
- "address count [addr]\n - compute CRC32 checksum [save at addr]\n"
+ "address count [addr]\n - compute CRC32 checksum [save at addr]"
);
#else /* CONFIG_CRC32_VERIFY */
@@ -1221,7 +1221,7 @@ U_BOOT_CMD(
crc32, 5, 1, do_mem_crc,
"checksum calculation",
"address count [addr]\n - compute CRC32 checksum [save at addr]\n"
- "-v address count crc\n - verify crc of memory area\n"
+ "-v address count crc\n - verify crc of memory area"
);
#endif /* CONFIG_CRC32_VERIFY */
@@ -1230,43 +1230,40 @@ U_BOOT_CMD(
base, 2, 1, do_mem_base,
"print or set address offset",
"\n - print address offset for memory commands\n"
- "base off\n - set address offset for memory commands to 'off'\n"
+ "base off\n - set address offset for memory commands to 'off'"
);
U_BOOT_CMD(
loop, 3, 1, do_mem_loop,
"infinite loop on address range",
- "[.b, .w, .l] address number_of_objects\n"
- " - loop on a set of addresses\n"
+ "[.b, .w, .l] address number_of_objects"
);
#ifdef CONFIG_LOOPW
U_BOOT_CMD(
loopw, 4, 1, do_mem_loopw,
"infinite write loop on address range",
- "[.b, .w, .l] address number_of_objects data_to_write\n"
- " - loop on a set of addresses\n"
+ "[.b, .w, .l] address number_of_objects data_to_write"
);
#endif /* CONFIG_LOOPW */
U_BOOT_CMD(
mtest, 5, 1, do_mem_mtest,
- "simple RAM test",
- "[start [end [pattern [iterations]]]]\n"
- " - simple RAM read/write test\n"
+ "simple RAM read/write test",
+ "[start [end [pattern [iterations]]]]"
);
#ifdef CONFIG_MX_CYCLIC
U_BOOT_CMD(
mdc, 4, 1, do_mem_mdc,
"memory display cyclic",
- "[.b, .w, .l] address count delay(ms)\n - memory display cyclic\n"
+ "[.b, .w, .l] address count delay(ms)"
);
U_BOOT_CMD(
mwc, 4, 1, do_mem_mwc,
"memory write cyclic",
- "[.b, .w, .l] address value delay(ms)\n - memory write cyclic\n"
+ "[.b, .w, .l] address value delay(ms)"
);
#endif /* CONFIG_MX_CYCLIC */
@@ -1274,6 +1271,6 @@ U_BOOT_CMD(
U_BOOT_CMD(
unzip, 4, 1, do_unzip,
"unzip a memory region",
- "srcaddr dstaddr [dstsize]\n"
+ "srcaddr dstaddr [dstsize]"
);
#endif /* CONFIG_CMD_UNZIP */
diff --git a/common/cmd_mfsl.c b/common/cmd_mfsl.c
index 6470bac..b19ad0e 100644
--- a/common/cmd_mfsl.c
+++ b/common/cmd_mfsl.c
@@ -394,8 +394,7 @@ U_BOOT_CMD (frd, 3, 1, do_frd,
" 0 - non blocking data read\n"
" 1 - non blocking control read\n"
" 2 - blocking data read\n"
- " 3 - blocking control read\n");
-
+ " 3 - blocking control read");
U_BOOT_CMD (fwr, 4, 1, do_fwr,
"write data to FSL",
@@ -403,11 +402,11 @@ U_BOOT_CMD (fwr, 4, 1, do_fwr,
" 0 - non blocking data write\n"
" 1 - non blocking control write\n"
" 2 - blocking data write\n"
- " 3 - blocking control write\n");
+ " 3 - blocking control write");
U_BOOT_CMD (rspr, 3, 1, do_rspr,
"read/write special purpose register",
"- reg_num [write value] read/write special purpose register\n"
" 1 - MSR - Machine status register\n"
" 3 - EAR - Exception address register\n"
- " 5 - ESR - Exception status register\n");
+ " 5 - ESR - Exception status register");
diff --git a/common/cmd_mgdisk.c b/common/cmd_mgdisk.c
index 48323d4..aadc335 100644
--- a/common/cmd_mgdisk.c
+++ b/common/cmd_mgdisk.c
@@ -70,7 +70,7 @@ U_BOOT_CMD(
" - random read : mgd read [from] [to] [size]\n"
" - random write : mgd write [from] [to] [size]\n"
" - sector read : mgd readsec [sector] [to] [counts]\n"
- " - sector write : mgd writesec [from] [sector] [counts]\n"
+ " - sector write : mgd writesec [from] [sector] [counts]"
);
#endif
diff --git a/common/cmd_mii.c b/common/cmd_mii.c
index d70031a..65e13c3 100644
--- a/common/cmd_mii.c
+++ b/common/cmd_mii.c
@@ -460,5 +460,5 @@ U_BOOT_CMD(
"mii read <addr> <reg> - read MII PHY <addr> register <reg>\n"
"mii write <addr> <reg> <data> - write MII PHY <addr> register <reg>\n"
"mii dump <addr> <reg> - pretty-print <addr> <reg> (0-5 only)\n"
- "Addr and/or reg may be ranges, e.g. 2-7.\n"
+ "Addr and/or reg may be ranges, e.g. 2-7."
);
diff --git a/common/cmd_misc.c b/common/cmd_misc.c
index 024299a..b97537e 100644
--- a/common/cmd_misc.c
+++ b/common/cmd_misc.c
@@ -56,7 +56,7 @@ int do_irqinfo (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
U_BOOT_CMD(
irqinfo, 1, 1, do_irqinfo,
"print information about IRQs",
- NULL
+ ""
);
#endif
@@ -64,5 +64,5 @@ U_BOOT_CMD(
sleep , 2, 1, do_sleep,
"delay execution for some time",
"N\n"
- " - delay execution for N seconds (N is _decimal_ !!!)\n"
+ " - delay execution for N seconds (N is _decimal_ !!!)"
);
diff --git a/common/cmd_mmc.c b/common/cmd_mmc.c
index 039fe59..32fe49b 100644
--- a/common/cmd_mmc.c
+++ b/common/cmd_mmc.c
@@ -89,7 +89,7 @@ U_BOOT_CMD(
mmc, 3, 1, do_mmc,
"MMC sub-system",
"init [dev] - init MMC sub system\n"
- "mmc device [dev] - show or set current device\n"
+ "mmc device [dev] - show or set current device"
);
#else /* !CONFIG_GENERIC_MMC */
@@ -135,9 +135,10 @@ int do_mmcinfo (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
return 0;
}
-U_BOOT_CMD(mmcinfo, 2, 0, do_mmcinfo,
- "print MMC information",
- "<dev num>\n");
+U_BOOT_CMD(mmcinfo, 2, 0, do_mmcinfo,
+ "mmcinfo <dev num>-- display MMC info\n",
+ ""
+);
int do_mmcops(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
{
@@ -231,5 +232,5 @@ U_BOOT_CMD(
"read <device num> addr blk# cnt\n"
"mmc write <device num> addr blk# cnt\n"
"mmc rescan <device num>\n"
- "mmc list - list available devices\n");
+ "mmc list - lists available devices");
#endif
diff --git a/common/cmd_mp.c b/common/cmd_mp.c
index a0839c2..faa8700 100644
--- a/common/cmd_mp.c
+++ b/common/cmd_mp.c
@@ -78,7 +78,7 @@ cpu_cmd(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
" Default for r3 is <num> and r6 is 0\n" \
"\n" \
" When cpu <num> is released r4 and r5 = 0.\n" \
- " r7 will contain the size of the initial mapped area\n"
+ " r7 will contain the size of the initial mapped area"
#endif
U_BOOT_CMD(
@@ -86,8 +86,9 @@ U_BOOT_CMD(
"Multiprocessor CPU boot manipulation and release",
"<num> reset - Reset cpu <num>\n"
"cpu <num> status - Status of cpu <num>\n"
- "cpu <num> release <addr> [args] - Release cpu <num> at <addr> with [args]\n"
+ "cpu <num> release <addr> [args] - Release cpu <num> at <addr> with [args]"
#ifdef CPU_ARCH_HELP
+ "\n"
CPU_ARCH_HELP
#endif
- );
+);
diff --git a/common/cmd_mtdparts.c b/common/cmd_mtdparts.c
index 8bd1db7..2d1446e 100644
--- a/common/cmd_mtdparts.c
+++ b/common/cmd_mtdparts.c
@@ -1863,7 +1863,7 @@ U_BOOT_CMD(
chpart, 2, 0, do_chpart,
"change active partition",
"part-id\n"
- " - change active partition (e.g. part-id = nand0,1)\n"
+ " - change active partition (e.g. part-id = nand0,1)"
);
U_BOOT_CMD(
@@ -1898,6 +1898,6 @@ U_BOOT_CMD(
"<size> := standard linux memsize OR '-' to denote all remaining space\n"
"<offset> := partition start offset within the device\n"
"<name> := '(' NAME ')'\n"
- "<ro-flag> := when set to 'ro' makes partition read-only (not used, passed to kernel)\n"
+ "<ro-flag> := when set to 'ro' makes partition read-only (not used, passed to kernel)"
);
/***************************************************/
diff --git a/common/cmd_nand.c b/common/cmd_nand.c
index 1992531..9451416 100644
--- a/common/cmd_nand.c
+++ b/common/cmd_nand.c
@@ -476,25 +476,26 @@ usage:
return 1;
}
-U_BOOT_CMD(nand, 5, 1, do_nand,
- "NAND sub-system",
- "info - show available NAND devices\n"
- "nand device [dev] - show or set current device\n"
- "nand read - addr off|partition size\n"
- "nand write - addr off|partition size\n"
- " read/write 'size' bytes starting at offset 'off'\n"
- " to/from memory address 'addr', skipping bad blocks.\n"
- "nand erase [clean] [off size] - erase 'size' bytes from\n"
- " offset 'off' (entire device if not specified)\n"
- "nand bad - show bad blocks\n"
- "nand dump[.oob] off - dump page\n"
- "nand scrub - really clean NAND erasing bad blocks (UNSAFE)\n"
- "nand markbad off - mark bad block at offset (UNSAFE)\n"
- "nand biterr off - make a bit error at offset (UNSAFE)\n"
+U_BOOT_CMD(nand, CONFIG_SYS_MAXARGS, 1, do_nand,
+ "NAND sub-system",
+ "info - show available NAND devices\n"
+ "nand device [dev] - show or set current device\n"
+ "nand read - addr off|partition size\n"
+ "nand write - addr off|partition size\n"
+ " read/write 'size' bytes starting at offset 'off'\n"
+ " to/from memory address 'addr', skipping bad blocks.\n"
+ "nand erase [clean] [off size] - erase 'size' bytes from\n"
+ " offset 'off' (entire device if not specified)\n"
+ "nand bad - show bad blocks\n"
+ "nand dump[.oob] off - dump page\n"
+ "nand scrub - really clean NAND erasing bad blocks (UNSAFE)\n"
+ "nand markbad off [...] - mark bad block(s) at offset (UNSAFE)\n"
+ "nand biterr off - make a bit error at offset (UNSAFE)"
#ifdef CONFIG_CMD_NAND_LOCK_UNLOCK
- "nand lock [tight] [status]\n"
- " bring nand to lock state or display locked pages\n"
- "nand unlock [offset] [size] - unlock section\n"
+ "\n"
+ "nand lock [tight] [status]\n"
+ " bring nand to lock state or display locked pages\n"
+ "nand unlock [offset] [size] - unlock section"
#endif
);
@@ -673,8 +674,8 @@ usage:
U_BOOT_CMD(nboot, 4, 1, do_nandboot,
"boot from NAND device",
- "[partition] | [[[loadAddr] dev] offset]\n");
-
+ "[partition] | [[[loadAddr] dev] offset]"
+);
#endif
#else /* CONFIG_NAND_LEGACY */
@@ -941,7 +942,7 @@ U_BOOT_CMD(
" offset `off' (entire device if not specified)\n"
"nand bad - show bad blocks\n"
"nand read.oob addr off size - read out-of-band data\n"
- "nand write.oob addr off size - read out-of-band data\n"
+ "nand write.oob addr off size - read out-of-band data"
);
int do_nandboot (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
@@ -1081,7 +1082,7 @@ int do_nandboot (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
nboot, 4, 1, do_nandboot,
"boot from NAND device",
- "loadAddr dev\n"
+ "loadAddr dev"
);
#endif
diff --git a/common/cmd_net.c b/common/cmd_net.c
index 92bbf85..68183c4 100644
--- a/common/cmd_net.c
+++ b/common/cmd_net.c
@@ -40,7 +40,7 @@ int do_bootp (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
bootp, 3, 1, do_bootp,
"boot image via network using BOOTP/TFTP protocol",
- "[loadAddress] [[hostIPaddr:]bootfilename]\n"
+ "[loadAddress] [[hostIPaddr:]bootfilename]"
);
int do_tftpb (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
@@ -51,7 +51,7 @@ int do_tftpb (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
tftpboot, 3, 1, do_tftpb,
"boot image via network using TFTP protocol",
- "[loadAddress] [[hostIPaddr:]bootfilename]\n"
+ "[loadAddress] [[hostIPaddr:]bootfilename]"
);
int do_rarpb (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
@@ -62,7 +62,7 @@ int do_rarpb (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
rarpboot, 3, 1, do_rarpb,
"boot image via network using RARP/TFTP protocol",
- "[loadAddress] [[hostIPaddr:]bootfilename]\n"
+ "[loadAddress] [[hostIPaddr:]bootfilename]"
);
#if defined(CONFIG_CMD_DHCP)
@@ -74,7 +74,7 @@ int do_dhcp (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
dhcp, 3, 1, do_dhcp,
"boot image via network using DHCP/TFTP protocol",
- "[loadAddress] [[hostIPaddr:]bootfilename]\n"
+ "[loadAddress] [[hostIPaddr:]bootfilename]"
);
#endif
@@ -87,7 +87,7 @@ int do_nfs (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
nfs, 3, 1, do_nfs,
"boot image via network using NFS protocol",
- "[loadAddress] [[hostIPaddr:]bootfilename]\n"
+ "[loadAddress] [[hostIPaddr:]bootfilename]"
);
#endif
@@ -269,7 +269,7 @@ int do_ping (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
ping, 2, 1, do_ping,
"send ICMP ECHO_REQUEST to network host",
- "pingAddress\n"
+ "pingAddress"
);
#endif
diff --git a/common/cmd_nvedit.c b/common/cmd_nvedit.c
index ac9e5cf..2186205 100644
--- a/common/cmd_nvedit.c
+++ b/common/cmd_nvedit.c
@@ -569,7 +569,7 @@ int do_saveenv (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
saveenv, 1, 0, do_saveenv,
"save environment variables to persistent storage",
- NULL
+ ""
);
#endif
@@ -602,7 +602,7 @@ U_BOOT_CMD(
"print environment variables",
"\n - print values of all environment variables\n"
"printenv name ...\n"
- " - print value of environment variable 'name'\n"
+ " - print value of environment variable 'name'"
);
U_BOOT_CMD(
@@ -611,7 +611,7 @@ U_BOOT_CMD(
"name value ...\n"
" - set environment variable 'name' to 'value ...'\n"
"setenv name\n"
- " - delete environment variable 'name'\n"
+ " - delete environment variable 'name'"
);
#if defined(CONFIG_CMD_ASKENV)
@@ -627,7 +627,7 @@ U_BOOT_CMD(
" - get environment variable 'name' from stdin (max 'size' chars)\n"
"askenv name [message] size\n"
" - display 'message' string and get environment variable 'name'"
- "from stdin (max 'size' chars)\n"
+ "from stdin (max 'size' chars)"
);
#endif
@@ -637,6 +637,6 @@ U_BOOT_CMD(
run, CONFIG_SYS_MAXARGS, 1, do_run,
"run commands in an environment variable",
"var [...]\n"
- " - run the commands in the environment variable(s) 'var'\n"
+ " - run the commands in the environment variable(s) 'var'"
);
#endif
diff --git a/common/cmd_onenand.c b/common/cmd_onenand.c
index e8f06d7..85bd2cb 100644
--- a/common/cmd_onenand.c
+++ b/common/cmd_onenand.c
@@ -486,5 +486,5 @@ U_BOOT_CMD(
"onenand test [off size] - test 'size' bytes from\n"
" offset 'off' (entire device if not specified)\n"
"onenand dump[.oob] off - dump page\n"
- "onenand markbad off - mark bad block at offset (UNSAFE)\n"
+ "onenand markbad off [...] - mark bad block(s) at offset (UNSAFE)"
);
diff --git a/common/cmd_otp.c b/common/cmd_otp.c
index 4be4344..30af5a3 100644
--- a/common/cmd_otp.c
+++ b/common/cmd_otp.c
@@ -233,4 +233,5 @@ U_BOOT_CMD(otp, 7, 0, do_otp,
"otp write [--force] <addr> <page> [count] [half]\n"
" - write 'count' half-pages starting at 'page' (offset 'half') from 'addr'\n"
"otp lock <page> <count>\n"
- " - lock 'count' pages starting at 'page'\n");
+ " - lock 'count' pages starting at 'page'"
+);
diff --git a/common/cmd_pci.c b/common/cmd_pci.c
index 4a9317f..8a260df 100644
--- a/common/cmd_pci.c
+++ b/common/cmd_pci.c
@@ -555,5 +555,5 @@ U_BOOT_CMD(
"pci modify[.b, .w, .l] b.d.f address\n"
" - modify, auto increment CFG address\n"
"pci write[.b, .w, .l] b.d.f address value\n"
- " - write to CFG address\n"
+ " - write to CFG address"
);
diff --git a/common/cmd_pcmcia.c b/common/cmd_pcmcia.c
index e448456..e576b0c 100644
--- a/common/cmd_pcmcia.c
+++ b/common/cmd_pcmcia.c
@@ -90,8 +90,8 @@ U_BOOT_CMD(
pinit, 2, 0, do_pinit,
"PCMCIA sub-system",
"on - power on PCMCIA socket\n"
- "pinit off - power off PCMCIA socket\n"
- );
+ "pinit off - power off PCMCIA socket"
+);
#endif
diff --git a/common/cmd_portio.c b/common/cmd_portio.c
index 41b1991..f8befee 100644
--- a/common/cmd_portio.c
+++ b/common/cmd_portio.c
@@ -94,7 +94,7 @@ int do_portio_out (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
out, 3, 1, do_portio_out,
"write datum to IO port",
- "[.b, .w, .l] port value\n - output to IO port\n"
+ "[.b, .w, .l] port value\n - output to IO port"
);
int do_portio_in (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
@@ -159,5 +159,5 @@ U_BOOT_CMD(
in, 2, 1, do_portio_in,
"read data from an IO port",
"[.b, .w, .l] port\n"
- " - read datum from IO port\n"
+ " - read datum from IO port"
);
diff --git a/common/cmd_reginfo.c b/common/cmd_reginfo.c
index 0e28c05..abb9941 100644
--- a/common/cmd_reginfo.c
+++ b/common/cmd_reginfo.c
@@ -383,5 +383,6 @@ int do_reginfo (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
reginfo, 2, 1, do_reginfo,
"print register information",
+ ""
);
#endif
diff --git a/common/cmd_reiser.c b/common/cmd_reiser.c
index 14e4bd4..8ede782 100644
--- a/common/cmd_reiser.c
+++ b/common/cmd_reiser.c
@@ -104,7 +104,7 @@ U_BOOT_CMD(
reiserls, 4, 1, do_reiserls,
"list files in a directory (default /)",
"<interface> <dev[:part]> [directory]\n"
- " - list files from 'dev' on 'interface' in a 'directory'\n"
+ " - list files from 'dev' on 'interface' in a 'directory'"
);
/******************************************************************************
@@ -235,5 +235,5 @@ U_BOOT_CMD(
"load binary file from a Reiser filesystem",
"<interface> <dev[:part]> [addr] [filename] [bytes]\n"
" - load binary file 'filename' from 'dev' on 'interface'\n"
- " to address 'addr' from dos filesystem\n"
+ " to address 'addr' from dos filesystem"
);
diff --git a/common/cmd_sata.c b/common/cmd_sata.c
index e849778..a8147e0 100644
--- a/common/cmd_sata.c
+++ b/common/cmd_sata.c
@@ -200,4 +200,5 @@ U_BOOT_CMD(
"sata device [dev] - show or set current device\n"
"sata part [dev] - print partition table\n"
"sata read addr blk# cnt\n"
- "sata write addr blk# cnt\n");
+ "sata write addr blk# cnt"
+);
diff --git a/common/cmd_scsi.c b/common/cmd_scsi.c
index dd2c1ae..f89492f 100644
--- a/common/cmd_scsi.c
+++ b/common/cmd_scsi.c
@@ -623,11 +623,11 @@ U_BOOT_CMD(
"scsi device [dev] - show or set current device\n"
"scsi part [dev] - print partition table of one or all SCSI devices\n"
"scsi read addr blk# cnt - read `cnt' blocks starting at block `blk#'\n"
- " to memory address `addr'\n"
+ " to memory address `addr'"
);
U_BOOT_CMD(
scsiboot, 3, 1, do_scsiboot,
"boot from SCSI device",
- "loadAddr dev:part\n"
+ "loadAddr dev:part"
);
diff --git a/common/cmd_setexpr.c b/common/cmd_setexpr.c
index 9a5e720..f8b5d4d 100644
--- a/common/cmd_setexpr.c
+++ b/common/cmd_setexpr.c
@@ -66,5 +66,5 @@ U_BOOT_CMD(
"set environment variable as the result of eval expression",
"name value1 <op> value2\n"
" - set environment variable 'name' to the result of the evaluated\n"
- " express specified by <op>. <op> can be &, |, ^, +, -, *, /, %\n"
+ " express specified by <op>. <op> can be &, |, ^, +, -, *, /, %"
);
diff --git a/common/cmd_sf.c b/common/cmd_sf.c
index 6a60b16..2d463a8 100644
--- a/common/cmd_sf.c
+++ b/common/cmd_sf.c
@@ -188,4 +188,5 @@ U_BOOT_CMD(
" `offset' to memory at `addr'\n"
"sf write addr offset len - write `len' bytes from memory\n"
" at `addr' to flash at `offset'\n"
- "sf erase offset len - erase `len' bytes from `offset'\n");
+ "sf erase offset len - erase `len' bytes from `offset'"
+);
diff --git a/common/cmd_source.c b/common/cmd_source.c
index 43e1315..965b8b1 100644
--- a/common/cmd_source.c
+++ b/common/cmd_source.c
@@ -229,10 +229,11 @@ U_BOOT_CMD(
"run script from memory",
"[addr]\n"
"\t- run script starting at addr\n"
- "\t- A valid image header must be present\n"
+ "\t- A valid image header must be present"
#if defined(CONFIG_FIT)
+ "\n"
"For FIT format uImage addr must include subimage\n"
- "unit name in the form of addr:<subimg_uname>\n"
+ "unit name in the form of addr:<subimg_uname>"
#endif
);
@@ -251,6 +252,6 @@ do_autoscr (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
autoscr, 2, 0, do_autoscr,
"DEPRECATED - use \"source\" command instead",
- "DEPRECATED - use \"source\" command instead\n"
+ ""
);
#endif
diff --git a/common/cmd_spi.c b/common/cmd_spi.c
index 746d14f..ab7aac7 100644
--- a/common/cmd_spi.c
+++ b/common/cmd_spi.c
@@ -142,5 +142,5 @@ U_BOOT_CMD(
"<device> <bit_len> <dout> - Send <bit_len> bits from <dout> out the SPI\n"
"<device> - Identifies the chip select of the device\n"
"<bit_len> - Number of bits to send (base 10)\n"
- "<dout> - Hexadecimal string that gets sent\n"
+ "<dout> - Hexadecimal string that gets sent"
);
diff --git a/common/cmd_strings.c b/common/cmd_strings.c
index 4517ba2..3a0d8ff 100644
--- a/common/cmd_strings.c
+++ b/common/cmd_strings.c
@@ -43,4 +43,5 @@ int do_strings(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(strings, 3, 1, do_strings,
"display strings",
"<addr> [byte count]\n"
- " - display strings at <addr> for at least [byte count] or first double NUL\n");
+ " - display strings at <addr> for at least [byte count] or first double NUL"
+);
diff --git a/common/cmd_ubi.c b/common/cmd_ubi.c
index 64a7307..bbca389 100644
--- a/common/cmd_ubi.c
+++ b/common/cmd_ubi.c
@@ -609,5 +609,5 @@ U_BOOT_CMD(ubi, 6, 1, do_ubi,
"[Legends]\n"
" volume: charater name\n"
" size: KiB, MiB, GiB, and bytes\n"
- " type: s[tatic] or d[ynamic] (default=dynamic)\n"
+ " type: s[tatic] or d[ynamic] (default=dynamic)"
);
diff --git a/common/cmd_ubifs.c b/common/cmd_ubifs.c
index 4767aa4..d9f60d5 100644
--- a/common/cmd_ubifs.c
+++ b/common/cmd_ubifs.c
@@ -119,14 +119,17 @@ int do_ubifs_load(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
ubifsmount, 2, 0, do_ubifs_mount,
"mount UBIFS volume",
- "\n");
+ ""
+);
U_BOOT_CMD(ubifsls, 2, 0, do_ubifs_ls,
- "list files in a directory",
- "[directory]\n"
- " - list files in a 'directory' (default '/')\n");
+ "list files in a directory",
+ "[directory]\n"
+ " - list files in a 'directory' (default '/')"
+);
U_BOOT_CMD(ubifsload, 4, 0, do_ubifs_load,
- "load file from an UBIFS filesystem",
- "<addr> <filename> [bytes]\n"
- " - load file 'filename' to address 'addr'\n");
+ "load file from an UBIFS filesystem",
+ "<addr> <filename> [bytes]\n"
+ " - load file 'filename' to address 'addr'"
+);
diff --git a/common/cmd_universe.c b/common/cmd_universe.c
index bfb91b5..0a6d722 100644
--- a/common/cmd_universe.c
+++ b/common/cmd_universe.c
@@ -382,5 +382,5 @@ U_BOOT_CMD(
" 03 -> Configuration Space\n"
" [vdw] = VMEbus Maximum Datawidth: 01 -> D8 Data Width\n"
" 02 -> D16 Data Width\n"
- " 03 -> D32 Data Width\n"
+ " 03 -> D32 Data Width"
);
diff --git a/common/cmd_usb.c b/common/cmd_usb.c
index a18e16e..7b8ee6b 100644
--- a/common/cmd_usb.c
+++ b/common/cmd_usb.c
@@ -686,14 +686,14 @@ U_BOOT_CMD(
"usb part [dev] - print partition table of one or all USB storage"
" devices\n"
"usb read addr blk# cnt - read `cnt' blocks starting at block `blk#'\n"
- " to memory address `addr'\n"
+ " to memory address `addr'"
);
U_BOOT_CMD(
usbboot, 3, 1, do_usbboot,
"boot from USB device",
- "loadAddr dev:part\n"
+ "loadAddr dev:part"
);
#else
@@ -702,6 +702,6 @@ U_BOOT_CMD(
"USB sub-system",
"reset - reset (rescan) USB controller\n"
"usb tree - show USB device tree\n"
- "usb info [dev] - show available USB devices\n"
+ "usb info [dev] - show available USB devices"
);
#endif
diff --git a/common/cmd_vfd.c b/common/cmd_vfd.c
index 84d9530..9c5b038 100644
--- a/common/cmd_vfd.c
+++ b/common/cmd_vfd.c
@@ -71,7 +71,7 @@ U_BOOT_CMD(
"/N\n"
" - load bitmap N to the VFDs (N is _decimal_ !!!)\n"
"vfd ADDR\n"
- " - load bitmap at address ADDR\n"
+ " - load bitmap at address ADDR"
);
#endif
diff --git a/common/cmd_ximg.c b/common/cmd_ximg.c
index a45d248..5593b2d 100644
--- a/common/cmd_ximg.c
+++ b/common/cmd_ximg.c
@@ -180,11 +180,12 @@ do_imgextract(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
}
U_BOOT_CMD(imxtract, 4, 1, do_imgextract,
- "extract a part of a multi-image",
- "addr part [dest]\n"
- " - extract <part> from legacy image at <addr> and copy to <dest>\n"
+ "extract a part of a multi-image",
+ "addr part [dest]\n"
+ " - extract <part> from legacy image at <addr> and copy to <dest>"
#if defined(CONFIG_FIT)
- "addr uname [dest]\n"
- " - extract <uname> subimage from FIT image at <addr> and copy to <dest>\n"
+ "\n"
+ "addr uname [dest]\n"
+ " - extract <uname> subimage from FIT image at <addr> and copy to <dest>"
#endif
);
diff --git a/common/cmd_yaffs2.c b/common/cmd_yaffs2.c
index c47ea76..d448d04 100644
--- a/common/cmd_yaffs2.c
+++ b/common/cmd_yaffs2.c
@@ -143,71 +143,71 @@ int do_ydump (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
ymount, 3, 0, do_ymount,
"mount yaffs",
- "\n"
+ ""
);
U_BOOT_CMD(
yumount, 3, 0, do_yumount,
"unmount yaffs",
- "\n"
+ ""
);
U_BOOT_CMD(
yls, 4, 0, do_yls,
"yaffs ls",
- "[-l] name\n"
+ "[-l] name"
);
U_BOOT_CMD(
yrd, 2, 0, do_yrd,
"read file from yaffs",
- "filename\n"
+ "filename"
);
U_BOOT_CMD(
ywr, 4, 0, do_ywr,
"write file to yaffs",
- "filename value num_vlues\n"
+ "filename value num_vlues"
);
U_BOOT_CMD(
yrdm, 3, 0, do_yrdm,
"read file to memory from yaffs",
- "filename offset\n"
+ "filename offset"
);
U_BOOT_CMD(
ywrm, 4, 0, do_ywrm,
"write file from memory to yaffs",
- "filename offset size\n"
+ "filename offset size"
);
U_BOOT_CMD(
ymkdir, 2, 0, do_ymkdir,
"YAFFS mkdir",
- "dirname\n"
+ "dirname"
);
U_BOOT_CMD(
yrmdir, 2, 0, do_yrmdir,
"YAFFS rmdir",
- "dirname\n"
+ "dirname"
);
U_BOOT_CMD(
yrm, 2, 0, do_yrm,
"YAFFS rm",
- "path\n"
+ "path"
);
U_BOOT_CMD(
ymv, 4, 0, do_ymv,
"YAFFS mv",
- "oldPath newPath\n"
+ "oldPath newPath"
);
U_BOOT_CMD(
ydump, 2, 0, do_ydump,
"YAFFS device struct",
- "dirname\n"
+ "dirname"
);
diff --git a/common/command.c b/common/command.c
index 16f3afe..b57f8df 100644
--- a/common/command.c
+++ b/common/command.c
@@ -39,7 +39,7 @@ do_version (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
version, 1, 1, do_version,
"print monitor version",
- NULL
+ ""
);
#if defined(CONFIG_CMD_ECHO)
@@ -73,7 +73,7 @@ U_BOOT_CMD(
echo, CONFIG_SYS_MAXARGS, 1, do_echo,
"echo args to console",
"[args..]\n"
- " - echo args to console; \\c suppresses newline\n"
+ " - echo args to console; \\c suppresses newline"
);
#endif
@@ -204,8 +204,7 @@ do_test (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
test, CONFIG_SYS_MAXARGS, 1, do_test,
"minimal test like /bin/sh",
- "[args..]\n"
- " - test functionality\n"
+ "[args..]"
);
int
@@ -223,7 +222,7 @@ do_exit (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
exit, 2, 1, do_exit,
"exit script",
- " - exit functionality\n"
+ ""
);
@@ -314,15 +313,15 @@ U_BOOT_CMD(
"'help' prints online help for the monitor commands.\n\n"
"Without arguments, it prints a short usage message for all commands.\n\n"
"To get detailed help information for specific commands you can type\n"
- "'help' with one or more command names as arguments.\n"
+ "'help' with one or more command names as arguments."
);
-/* This do not ust the U_BOOT_CMD macro as ? can't be used in symbol names */
+/* This does not use the U_BOOT_CMD macro as ? can't be used in symbol names */
#ifdef CONFIG_SYS_LONGHELP
cmd_tbl_t __u_boot_cmd_question_mark Struct_Section = {
"?", CONFIG_SYS_MAXARGS, 1, do_help,
"alias for 'help'",
- NULL
+ ""
};
#else
cmd_tbl_t __u_boot_cmd_question_mark Struct_Section = {
diff --git a/common/hush.c b/common/hush.c
index cf5782a..97fd070 100644
--- a/common/hush.c
+++ b/common/hush.c
@@ -3627,7 +3627,7 @@ U_BOOT_CMD(
"print local hushshell variables",
"\n - print values of all hushshell variables\n"
"showvar name ...\n"
- " - print value of hushshell variable 'name'\n"
+ " - print value of hushshell variable 'name'"
);
#endif
diff --git a/common/lcd.c b/common/lcd.c
index 4155170..74a5c77 100644
--- a/common/lcd.c
+++ b/common/lcd.c
@@ -427,7 +427,7 @@ static int lcd_clear (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
cls, 1, 1, lcd_clear,
"clear screen",
- NULL
+ ""
);
/*----------------------------------------------------------------------*/
diff --git a/cpu/arm_cortexa8/omap3/board.c b/cpu/arm_cortexa8/omap3/board.c
index 51d5cf6..6e29599 100644
--- a/cpu/arm_cortexa8/omap3/board.c
+++ b/cpu/arm_cortexa8/omap3/board.c
@@ -335,8 +335,8 @@ usage:
U_BOOT_CMD(
nandecc, 2, 1, do_switch_ecc,
"nandecc - switch OMAP3 NAND ECC calculation algorithm\n",
- "[hw/sw] - Switch between NAND hardware (hw) or software (sw) ecc algorithm\n"
- );
+ "[hw/sw] - Switch between NAND hardware (hw) or software (sw) ecc algorithm"
+);
#endif /* CONFIG_NAND_OMAP_GPMC */
diff --git a/cpu/mpc512x/iim.c b/cpu/mpc512x/iim.c
index 6cdc422..8f2eb37 100644
--- a/cpu/mpc512x/iim.c
+++ b/cpu/mpc512x/iim.c
@@ -389,6 +389,6 @@ U_BOOT_CMD(
" no args for entire bank\n"
"fuse prog <frow_bit> - program fuse at row <frow>, bit <_bit>\n"
" <frow> is 0-31, <bit> is 0-7; eg. 13_2 \n"
- " WARNING - this is permanent\n"
- );
+ " WARNING - this is permanent"
+);
#endif /* CONFIG_CMD_FUSE */
diff --git a/cpu/mpc512x/speed.c b/cpu/mpc512x/speed.c
index 5992111..1f90862 100644
--- a/cpu/mpc512x/speed.c
+++ b/cpu/mpc512x/speed.c
@@ -138,7 +138,7 @@ int do_clocks (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(clocks, 1, 0, do_clocks,
"print clock configuration",
- " clocks\n"
+ " clocks"
);
int prt_mpc512x_clks (void)
diff --git a/cpu/mpc83xx/speed.c b/cpu/mpc83xx/speed.c
index 9b7e7b5..95b558f 100644
--- a/cpu/mpc83xx/speed.c
+++ b/cpu/mpc83xx/speed.c
@@ -545,5 +545,5 @@ int do_clocks (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(clocks, 1, 0, do_clocks,
"print clock configuration",
- " clocks\n"
+ " clocks"
);
diff --git a/cpu/nios/asmi.c b/cpu/nios/asmi.c
index 2c2e838..33553b7 100644
--- a/cpu/nios/asmi.c
+++ b/cpu/nios/asmi.c
@@ -48,7 +48,7 @@
"asmi write addr offset count\n"\
" - write count bytes to offset from addr.\n"\
"asmi verify addr offset count\n"\
- " - verify count bytes at offset from addr.\n"
+ " - verify count bytes at offset from addr."
/*-----------------------------------------------------------------------*/
diff --git a/cpu/nios2/epcs.c b/cpu/nios2/epcs.c
index 968b50f..483b249 100644
--- a/cpu/nios2/epcs.c
+++ b/cpu/nios2/epcs.c
@@ -47,7 +47,7 @@
"epcs write addr offset count\n"\
" - write count bytes to offset from addr.\n"\
"epcs verify addr offset count\n"\
- " - verify count bytes at offset from addr.\n"
+ " - verify count bytes at offset from addr."
/*-----------------------------------------------------------------------*/
diff --git a/cpu/nios2/sysid.c b/cpu/nios2/sysid.c
index 251204b..77bc8b5 100644
--- a/cpu/nios2/sysid.c
+++ b/cpu/nios2/sysid.c
@@ -53,6 +53,6 @@ int do_sysid (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
sysid, 1, 1, do_sysid,
"display Nios-II system id",
- "\n - display Nios-II system id\n"
+ ""
);
#endif /* CONFIG_SYS_NIOS_SYSID_BASE */
diff --git a/drivers/gpio/pca953x.c b/drivers/gpio/pca953x.c
index 1c5e314..e8273ee 100644
--- a/drivers/gpio/pca953x.c
+++ b/drivers/gpio/pca953x.c
@@ -221,7 +221,7 @@ U_BOOT_CMD(
"pca953x invert pin 0|1\n"
" - disable/enable polarity inversion for reads\n"
"pca953x intput pin\n"
- " - set pin as input and read value\n"
+ " - set pin as input and read value"
);
#endif /* CONFIG_CMD_PCA953X */
diff --git a/drivers/misc/ds4510.c b/drivers/misc/ds4510.c
index 8b5fbbc..f2510a3 100644
--- a/drivers/misc/ds4510.c
+++ b/drivers/misc/ds4510.c
@@ -404,12 +404,14 @@ U_BOOT_CMD(
"ds4510 pullup pin 0|1\n"
" - disable/enable pullup on specified pin\n"
"ds4510 nv 0|1\n"
- " - make gpio and seeprom writes volatile/non-volatile\n"
+ " - make gpio and seeprom writes volatile/non-volatile"
#ifdef CONFIG_CMD_DS4510_RST
+ "\n"
"ds4510 rstdelay 0-3\n"
- " - set reset output delay\n"
+ " - set reset output delay"
#endif
#ifdef CONFIG_CMD_DS4510_MEM
+ "\n"
"ds4510 eeprom read addr off cnt\n"
"ds4510 eeprom write addr off cnt\n"
" - read/write 'cnt' bytes at EEPROM offset 'off'\n"
@@ -418,7 +420,7 @@ U_BOOT_CMD(
" - read/write 'cnt' bytes at SRAM-shadowed EEPROM offset 'off'\n"
"ds4510 sram read addr off cnt\n"
"ds4510 sram write addr off cnt\n"
- " - read/write 'cnt' bytes at SRAM offset 'off'\n"
+ " - read/write 'cnt' bytes at SRAM offset 'off'"
#endif
);
#endif /* CONFIG_CMD_DS4510 */
diff --git a/drivers/qe/qe.c b/drivers/qe/qe.c
index f114fe0..918bfa7 100644
--- a/drivers/qe/qe.c
+++ b/drivers/qe/qe.c
@@ -473,5 +473,6 @@ U_BOOT_CMD(
qe, 4, 0, qe_cmd,
"QUICC Engine commands",
"fw <addr> [<length>] - Upload firmware binary at address <addr> to "
- "the QE,\n\twith optional length <length> verification.\n"
- );
+ "the QE,\n"
+ "\twith optional length <length> verification."
+);