summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorHaavard Skinnemoen <haavard.skinnemoen@atmel.com>2008-08-31 18:05:32 +0200
committerHaavard Skinnemoen <haavard.skinnemoen@atmel.com>2008-09-01 14:21:34 +0200
commit98090cd75cdb40b2ab94c806c338540a5716748b (patch)
tree1e401a8b0b0b1b46f170d603edc8b58227faf346
parentab0df36fc7db9dda0b786b909f653e279dfeb9cf (diff)
downloadu-boot-imx-98090cd75cdb40b2ab94c806c338540a5716748b.zip
u-boot-imx-98090cd75cdb40b2ab94c806c338540a5716748b.tar.gz
u-boot-imx-98090cd75cdb40b2ab94c806c338540a5716748b.tar.bz2
avr32: Add gclk helper functions
Add two helper functions for configuring and enabling generic clocks: - gclk_enable_output: Enables output on a GCLKx pin - gclk_set_rate: Configures a gclk to run at a specific rate This should eliminate any reason to go mucking about with PM registers from board code. Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
-rw-r--r--cpu/at32ap/at32ap700x/clk.c25
-rw-r--r--include/asm-avr32/arch-at32ap700x/clk.h99
2 files changed, 122 insertions, 2 deletions
diff --git a/cpu/at32ap/at32ap700x/clk.c b/cpu/at32ap/at32ap700x/clk.c
index b3aa034..a6a6c88 100644
--- a/cpu/at32ap/at32ap700x/clk.c
+++ b/cpu/at32ap/at32ap700x/clk.c
@@ -25,6 +25,7 @@
#include <asm/arch/clk.h>
#include <asm/arch/memory-map.h>
+#include <asm/arch/portmux.h>
#include "sm.h"
@@ -66,3 +67,27 @@ void clk_init(void)
sm_writel(PM_MCCTRL, SM_BIT(PLLSEL));
#endif
}
+
+unsigned long __gclk_set_rate(unsigned int id, enum gclk_parent parent,
+ unsigned long rate, unsigned long parent_rate)
+{
+ unsigned long divider;
+
+ if (rate == 0 || parent_rate == 0) {
+ sm_writel(PM_GCCTRL(id), 0);
+ return 0;
+ }
+
+ divider = (parent_rate + rate / 2) / rate;
+ if (divider <= 1) {
+ sm_writel(PM_GCCTRL(id), parent | SM_BIT(CEN));
+ rate = parent_rate;
+ } else {
+ divider = min(255, divider / 2 - 1);
+ sm_writel(PM_GCCTRL(id), parent | SM_BIT(CEN) | SM_BIT(DIVEN)
+ | SM_BF(DIV, divider));
+ rate = parent_rate / (2 * (divider + 1));
+ }
+
+ return rate;
+}
diff --git a/include/asm-avr32/arch-at32ap700x/clk.h b/include/asm-avr32/arch-at32ap700x/clk.h
index e9a4fe4..b2710a4 100644
--- a/include/asm-avr32/arch-at32ap700x/clk.h
+++ b/include/asm-avr32/arch-at32ap700x/clk.h
@@ -23,11 +23,13 @@
#define __ASM_AVR32_ARCH_CLK_H__
#include <asm/arch/chip-features.h>
+#include <asm/arch/portmux.h>
#ifdef CONFIG_PLL
-#define MAIN_CLK_RATE ((CFG_OSC0_HZ / CFG_PLL0_DIV) * CFG_PLL0_MUL)
+#define PLL0_RATE ((CFG_OSC0_HZ / CFG_PLL0_DIV) * CFG_PLL0_MUL)
+#define MAIN_CLK_RATE PLL0_RATE
#else
-#define MAIN_CLK_RATE (CFG_OSC0_HZ)
+#define MAIN_CLK_RATE (CFG_OSC0_HZ)
#endif
static inline unsigned long get_cpu_clk_rate(void)
@@ -87,4 +89,97 @@ extern void gclk_init(void) __attribute__((weak));
/* Board code may need the SDRAM base clock as a compile-time constant */
#define SDRAMC_BUS_HZ (MAIN_CLK_RATE >> CFG_CLKDIV_HSB)
+/* Generic clock control */
+enum gclk_parent {
+ GCLK_PARENT_OSC0 = 0,
+ GCLK_PARENT_OSC1 = 1,
+ GCLK_PARENT_PLL0 = 2,
+ GCLK_PARENT_PLL1 = 3,
+};
+
+/* Some generic clocks have specific roles */
+#define GCLK_DAC_SAMPLE_CLK 6
+#define GCLK_LCDC_PIXCLK 7
+
+extern unsigned long __gclk_set_rate(unsigned int id, enum gclk_parent parent,
+ unsigned long rate, unsigned long parent_rate);
+
+/**
+ * gclk_set_rate - configure and enable a generic clock
+ * @id: Which GCLK[id] to enable
+ * @parent: Parent clock feeding the GCLK
+ * @rate: Target rate of the GCLK in Hz
+ *
+ * Returns the actual GCLK rate in Hz, after rounding to the nearest
+ * supported rate.
+ *
+ * All three parameters are usually constant, hence the inline.
+ */
+static inline unsigned long gclk_set_rate(unsigned int id,
+ enum gclk_parent parent, unsigned long rate)
+{
+ unsigned long parent_rate;
+
+ if (id > 7)
+ return 0;
+
+ switch (parent) {
+ case GCLK_PARENT_OSC0:
+ parent_rate = CFG_OSC0_HZ;
+ break;
+#ifdef CFG_OSC1_HZ
+ case GCLK_PARENT_OSC1:
+ parent_rate = CFG_OSC1_HZ;
+ break;
+#endif
+#ifdef PLL0_RATE
+ case GCLK_PARENT_PLL0:
+ parent_rate = PLL0_RATE;
+ break;
+#endif
+#ifdef PLL1_RATE
+ case GCLK_PARENT_PLL1:
+ parent_rate = PLL1_RATE;
+ break;
+#endif
+ default:
+ parent_rate = 0;
+ break;
+ }
+
+ return __gclk_set_rate(id, parent, rate, parent_rate);
+}
+
+/**
+ * gclk_enable_output - enable output on a GCLK pin
+ * @id: Which GCLK[id] pin to enable
+ * @drive_strength: Drive strength of external GCLK pin, if applicable
+ */
+static inline void gclk_enable_output(unsigned int id,
+ unsigned long drive_strength)
+{
+ switch (id) {
+ case 0:
+ portmux_select_peripheral(PORTMUX_PORT_A, 1 << 30,
+ PORTMUX_FUNC_A, drive_strength);
+ break;
+ case 1:
+ portmux_select_peripheral(PORTMUX_PORT_A, 1 << 31,
+ PORTMUX_FUNC_A, drive_strength);
+ break;
+ case 2:
+ portmux_select_peripheral(PORTMUX_PORT_B, 1 << 19,
+ PORTMUX_FUNC_A, drive_strength);
+ break;
+ case 3:
+ portmux_select_peripheral(PORTMUX_PORT_B, 1 << 29,
+ PORTMUX_FUNC_A, drive_strength);
+ break;
+ case 4:
+ portmux_select_peripheral(PORTMUX_PORT_B, 1 << 30,
+ PORTMUX_FUNC_A, drive_strength);
+ break;
+ }
+}
+
#endif /* __ASM_AVR32_ARCH_CLK_H__ */