summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorMasahiro Yamada <yamada.m@jp.panasonic.com>2014-07-30 19:11:41 +0900
committerTom Rini <trini@ti.com>2014-08-09 11:17:04 -0400
commit8ac22a60e29c4d0925e3d640a3607eabb2732b26 (patch)
treed9c43e2208f31b56ea3634397a158877aa2b0584
parent0596d35d80f5090440bd9a2a2beaacb268ff59c0 (diff)
downloadu-boot-imx-8ac22a60e29c4d0925e3d640a3607eabb2732b26.zip
u-boot-imx-8ac22a60e29c4d0925e3d640a3607eabb2732b26.tar.gz
u-boot-imx-8ac22a60e29c4d0925e3d640a3607eabb2732b26.tar.bz2
omap: clean-up dead configs
The following configs are not defined at all. - CONFIG_OMAP1510 - CONFIG_OMAP_1510P1 - CONFIG_OMAP_SX1 - CONFIG_OMAP3_DMA - CONFIG_OMAP3_ZOOM2 - CONFIG_OMAP_INNOVATOR Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Cc: Tom Rini <trini@ti.com>
-rw-r--r--drivers/dma/Makefile1
-rw-r--r--drivers/dma/omap3_dma.c167
-rw-r--r--drivers/serial/ns16550.c2
-rw-r--r--drivers/serial/serial_ns16550.c9
-rw-r--r--drivers/serial/usbtty.h2
-rw-r--r--drivers/usb/gadget/Makefile1
-rw-r--r--drivers/usb/gadget/omap1510_udc.c49
-rw-r--r--include/configs/omap1510.h16
-rw-r--r--include/ns16550.h7
-rw-r--r--include/usb/udc.h4
10 files changed, 3 insertions, 255 deletions
diff --git a/drivers/dma/Makefile b/drivers/dma/Makefile
index 8b2821b..a79c391 100644
--- a/drivers/dma/Makefile
+++ b/drivers/dma/Makefile
@@ -8,4 +8,3 @@
obj-$(CONFIG_FSLDMAFEC) += MCD_tasksInit.o MCD_dmaApi.o MCD_tasks.o
obj-$(CONFIG_APBH_DMA) += apbh_dma.o
obj-$(CONFIG_FSL_DMA) += fsl_dma.o
-obj-$(CONFIG_OMAP3_DMA) += omap3_dma.o
diff --git a/drivers/dma/omap3_dma.c b/drivers/dma/omap3_dma.c
deleted file mode 100644
index 3320b3d..0000000
--- a/drivers/dma/omap3_dma.c
+++ /dev/null
@@ -1,167 +0,0 @@
-/* Copyright (C) 2011
- * Corscience GmbH & Co. KG - Simon Schwarz <schwarz@corscience.de>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-/* This is a basic implementation of the SDMA/DMA4 controller of OMAP3
- * Tested on Silicon Revision major:0x4 minor:0x0
- */
-
-#include <common.h>
-#include <asm/arch/cpu.h>
-#include <asm/arch/omap3.h>
-#include <asm/arch/dma.h>
-#include <asm/io.h>
-#include <asm/errno.h>
-
-static struct dma4 *dma4_cfg = (struct dma4 *)OMAP34XX_DMA4_BASE;
-uint32_t dma_active; /* if a transfer is started the respective
- bit is set for the logical channel */
-
-/* Check if we have the given channel
- * PARAMETERS:
- * chan: Channel number
- *
- * RETURN of non-zero means error */
-static inline int check_channel(uint32_t chan)
-{
- if (chan < CHAN_NR_MIN || chan > CHAN_NR_MAX)
- return -EINVAL;
- return 0;
-}
-
-static inline void reset_irq(uint32_t chan)
-{
- /* reset IRQ reason */
- writel(0x1DFE, &dma4_cfg->chan[chan].csr);
- /* reset IRQ */
- writel((1 << chan), &dma4_cfg->irqstatus_l[0]);
- dma_active &= ~(1 << chan);
-}
-
-/* Set Source, Destination and Size of DMA transfer for the
- * specified channel.
- * PARAMETERS:
- * chan: channel to use
- * src: source of the transfer
- * dst: destination of the transfer
- * sze: Size of the transfer
- *
- * RETURN of non-zero means error */
-int omap3_dma_conf_transfer(uint32_t chan, uint32_t *src, uint32_t *dst,
- uint32_t sze)
-{
- if (check_channel(chan))
- return -EINVAL;
- /* CDSA0 */
- writel((uint32_t)src, &dma4_cfg->chan[chan].cssa);
- writel((uint32_t)dst, &dma4_cfg->chan[chan].cdsa);
- writel(sze, &dma4_cfg->chan[chan].cen);
-return 0;
-}
-
-/* Start the DMA transfer */
-int omap3_dma_start_transfer(uint32_t chan)
-{
- uint32_t val;
-
- if (check_channel(chan))
- return -EINVAL;
-
- val = readl(&dma4_cfg->chan[chan].ccr);
- /* Test for channel already in use */
- if (val & CCR_ENABLE_ENABLE)
- return -EBUSY;
-
- writel((val | CCR_ENABLE_ENABLE), &dma4_cfg->chan[chan].ccr);
- dma_active |= (1 << chan);
- debug("started transfer...\n");
- return 0;
-}
-
-/* Busy-waiting for a DMA transfer
- * This has to be called before another transfer is started
- * PARAMETER
- * chan: Channel to wait for
- *
- * RETURN of non-zero means error*/
-int omap3_dma_wait_for_transfer(uint32_t chan)
-{
- uint32_t val;
-
- if (!(dma_active & (1 << chan))) {
- val = readl(&dma4_cfg->irqstatus_l[0]);
- if (!(val & chan)) {
- debug("dma: The channel you are trying to wait for "
- "was never activated - ERROR\n");
- return -1; /* channel was never active */
- }
- }
-
- /* all irqs on line 0 */
- while (!(readl(&dma4_cfg->irqstatus_l[0]) & (1 << chan)))
- asm("nop");
-
- val = readl(&dma4_cfg->chan[chan].csr);
- if ((val & CSR_TRANS_ERR) | (val & CSR_SUPERVISOR_ERR) |
- (val & CSR_MISALIGNED_ADRS_ERR)) {
- debug("err code: %X\n", val);
- debug("dma: transfer error detected\n");
- reset_irq(chan);
- return -1;
- }
- reset_irq(chan);
- return 0;
-}
-
-/* Get the revision of the DMA module
- * PARAMETER
- * minor: Address of minor revision to write
- * major: Address of major revision to write
- *
- * RETURN of non-zero means error
- */
-int omap3_dma_get_revision(uint32_t *minor, uint32_t *major)
-{
- uint32_t val;
-
- /* debug information */
- val = readl(&dma4_cfg->revision);
- *major = (val & 0x000000F0) >> 4;
- *minor = (val & 0x0000000F);
- debug("DMA Silicon revision (maj/min): 0x%X/0x%X\n", *major, *minor);
- return 0;
-}
-
-/* Initial config of omap dma
- */
-void omap3_dma_init(void)
-{
- dma_active = 0;
- /* All interrupts on channel 0 */
- writel(0xFFFFFFFF, &dma4_cfg->irqenable_l[0]);
-}
-
-/* set channel config to config
- *
- * RETURN of non-zero means error */
-int omap3_dma_conf_chan(uint32_t chan, struct dma4_chan *config)
-{
- if (check_channel(chan))
- return -EINVAL;
-
- dma4_cfg->chan[chan] = *config;
- return 0;
-}
-
-/* get channel config to config
- *
- * RETURN of non-zero means error */
-int omap3_dma_get_conf_chan(uint32_t chan, struct dma4_chan *config)
-{
- if (check_channel(chan))
- return -EINVAL;
- *config = dma4_cfg->chan[chan];
- return 0;
-}
diff --git a/drivers/serial/ns16550.c b/drivers/serial/ns16550.c
index 8e7052d..079f67d 100644
--- a/drivers/serial/ns16550.c
+++ b/drivers/serial/ns16550.c
@@ -81,7 +81,7 @@ void NS16550_init(NS16550_t com_port, int baud_divisor)
serial_out(baud_divisor & 0xff, &com_port->dll);
serial_out((baud_divisor >> 8) & 0xff, &com_port->dlm);
serial_out(UART_LCRVAL, &com_port->lcr);
-#if (defined(CONFIG_OMAP) && !defined(CONFIG_OMAP3_ZOOM2)) || \
+#if defined(CONFIG_OMAP) || \
defined(CONFIG_AM33XX) || defined(CONFIG_SOC_DA8XX) || \
defined(CONFIG_TI81XX) || defined(CONFIG_AM43XX)
diff --git a/drivers/serial/serial_ns16550.c b/drivers/serial/serial_ns16550.c
index 4413e69..dafeed7 100644
--- a/drivers/serial/serial_ns16550.c
+++ b/drivers/serial/serial_ns16550.c
@@ -122,15 +122,6 @@ static int calc_divisor (NS16550_t port)
{
const unsigned int mode_x_div = 16;
-#ifdef CONFIG_OMAP1510
- /* If can't cleanly clock 115200 set div to 1 */
- if ((CONFIG_SYS_NS16550_CLK == 12000000) && (gd->baudrate == 115200)) {
- port->osc_12m_sel = OSC_12M_SEL; /* enable 6.5 * divisor */
- return (1); /* return 1 for base divisor */
- }
- port->osc_12m_sel = 0; /* clear if previsouly set */
-#endif
-
return DIV_ROUND_CLOSEST(CONFIG_SYS_NS16550_CLK,
mode_x_div * gd->baudrate);
}
diff --git a/drivers/serial/usbtty.h b/drivers/serial/usbtty.h
index 21a3ef4..538b6d7 100644
--- a/drivers/serial/usbtty.h
+++ b/drivers/serial/usbtty.h
@@ -14,8 +14,6 @@
#include <usbdevice.h>
#if defined(CONFIG_PPC)
#include <usb/mpc8xx_udc.h>
-#elif defined(CONFIG_OMAP1510)
-#include <usb/omap1510_udc.h>
#elif defined(CONFIG_CPU_PXA27X)
#include <usb/pxa27x_udc.h>
#elif defined(CONFIG_DW_UDC)
diff --git a/drivers/usb/gadget/Makefile b/drivers/usb/gadget/Makefile
index 66becdc..4eea907 100644
--- a/drivers/usb/gadget/Makefile
+++ b/drivers/usb/gadget/Makefile
@@ -31,7 +31,6 @@ ifdef CONFIG_USB_DEVICE
obj-y += core.o
obj-y += ep0.o
obj-$(CONFIG_DW_UDC) += designware_udc.o
-obj-$(CONFIG_OMAP1510) += omap1510_udc.o
obj-$(CONFIG_OMAP1610) += omap1510_udc.o
obj-$(CONFIG_MPC885_FAMILY) += mpc8xx_udc.o
obj-$(CONFIG_CPU_PXA27X) += pxa27x_udc.o
diff --git a/drivers/usb/gadget/omap1510_udc.c b/drivers/usb/gadget/omap1510_udc.c
index bdc1b88..959df8c 100644
--- a/drivers/usb/gadget/omap1510_udc.c
+++ b/drivers/usb/gadget/omap1510_udc.c
@@ -15,9 +15,6 @@
#include <common.h>
#include <asm/io.h>
-#ifdef CONFIG_OMAP_SX1
-#include <i2c.h>
-#endif
#include <usbdevice.h>
#include <usb/omap1510_udc.h>
#include <usb/udc.h>
@@ -1097,20 +1094,6 @@ int udc_init (void)
outw ((1 << 4) | (1 << 5), CLOCK_CTRL);
UDCREG (CLOCK_CTRL);
-#ifdef CONFIG_OMAP1510
- /* This code was originally implemented for OMAP1510 and
- * therefore is only applicable for OMAP1510 boards. For
- * OMAP5912 or OMAP16xx the register APLL_CTRL does not
- * exist and DPLL_CTRL is already configured.
- */
-
- /* Set and check APLL */
- outw (0x0008, APLL_CTRL);
- UDCREG (APLL_CTRL);
- /* Set and check DPLL */
- outw (0x2210, DPLL_CTRL);
- UDCREG (DPLL_CTRL);
-#endif
/* Set and check SOFT
* The below line of code has been changed to perform a
* read-modify-write instead of a simple write for
@@ -1124,44 +1107,12 @@ int udc_init (void)
/* Print banner with device revision */
udc_rev = inw (UDC_REV) & 0xff;
-#ifdef CONFIG_OMAP1510
- printf ("USB: TI OMAP1510 USB function module rev %d.%d\n",
- udc_rev >> 4, udc_rev & 0xf);
-#endif
#ifdef CONFIG_OMAP1610
printf ("USB: TI OMAP5912 USB function module rev %d.%d\n",
udc_rev >> 4, udc_rev & 0xf);
#endif
-#ifdef CONFIG_OMAP_SX1
- i2c_read (0x32, 0x04, 1, &value, 1);
- value |= 0x04;
- i2c_write (0x32, 0x04, 1, &value, 1);
-
- i2c_read (0x32, 0x03, 1, &value, 1);
- value |= 0x01;
- i2c_write (0x32, 0x03, 1, &value, 1);
-
- gpio = inl(GPIO_PIN_CONTROL_REG);
- gpio |= 0x0002; /* A_IRDA_OFF */
- gpio |= 0x0800; /* A_SWITCH */
- gpio |= 0x8000; /* A_USB_ON */
- outl (gpio, GPIO_PIN_CONTROL_REG);
-
- gpio = inl(GPIO_DIR_CONTROL_REG);
- gpio &= ~0x0002; /* A_IRDA_OFF */
- gpio &= ~0x0800; /* A_SWITCH */
- gpio &= ~0x8000; /* A_USB_ON */
- outl (gpio, GPIO_DIR_CONTROL_REG);
-
- gpio = inl(GPIO_DATA_OUTPUT_REG);
- gpio |= 0x0002; /* A_IRDA_OFF */
- gpio &= ~0x0800; /* A_SWITCH */
- gpio &= ~0x8000; /* A_USB_ON */
- outl (gpio, GPIO_DATA_OUTPUT_REG);
-#endif
-
/* The VBUS_MODE bit selects whether VBUS detection is done via
* software (1) or hardware (0). When software detection is
* selected, VBUS_CTRL selects whether USB is not connected (0)
diff --git a/include/configs/omap1510.h b/include/configs/omap1510.h
index 41f7973..5482722 100644
--- a/include/configs/omap1510.h
+++ b/include/configs/omap1510.h
@@ -612,22 +612,6 @@ typedef struct {
int cpu_type(void);
#endif
-/*
- * EVM Implementation Specifics.
- *
- * *** NOTE ***
- * Any definitions in these files should be prefixed by an identifier -
- * eg. OMAP1510P1_FLASH0_BASE .
- *
- */
-#ifdef CONFIG_OMAP_INNOVATOR
-#include "innovator.h"
-#endif
-
-#ifdef CONFIG_OMAP_1510P1
-#include "omap1510p1.h"
-#endif
-
/*****************************************************************************/
#define CLKGEN_RESET_BASE (0xfffece00)
diff --git a/include/ns16550.h b/include/ns16550.h
index 17f829f..d1f3a90 100644
--- a/include/ns16550.h
+++ b/include/ns16550.h
@@ -64,8 +64,6 @@ struct NS16550 {
UART_REG(uasr); /* F */
UART_REG(scr); /* 10*/
UART_REG(ssr); /* 11*/
- UART_REG(reg12); /* 12*/
- UART_REG(osc_12m_sel); /* 13*/
#endif
};
@@ -164,11 +162,6 @@ typedef struct NS16550 *NS16550_t;
#define UART_IER_THRI 0x02 /* Enable Transmitter holding register int. */
#define UART_IER_RDI 0x01 /* Enable receiver data interrupt */
-
-#ifdef CONFIG_OMAP1510
-#define OSC_12M_SEL 0x01 /* selects 6.5 * current clk div */
-#endif
-
/* useful defaults for LCR */
#define UART_LCR_8N1 0x03
diff --git a/include/usb/udc.h b/include/usb/udc.h
index 1f545ec..b2e0c6b 100644
--- a/include/usb/udc.h
+++ b/include/usb/udc.h
@@ -12,8 +12,8 @@
#define EP_MAX_PACKET_SIZE 64
#endif
-#if !defined(CONFIG_PPC) && !defined(CONFIG_OMAP1510)
-/* omap1510_udc.h and mpc8xx_udc.h will set these values */
+#if !defined(CONFIG_PPC)
+/* mpc8xx_udc.h will set these values */
#define UDC_OUT_PACKET_SIZE EP_MAX_PACKET_SIZE
#define UDC_IN_PACKET_SIZE EP_MAX_PACKET_SIZE
#define UDC_INT_PACKET_SIZE EP_MAX_PACKET_SIZE