summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorGraeme Russ <gruss@tss-engineering.com>2015-01-25 12:07:52 +1100
committerStefano Babic <sbabic@denx.de>2015-02-10 12:48:50 +0100
commit7a086037071401ee781425c382846dddfe80df68 (patch)
treeaf1c3a2f0c7c3e631e6b49fdc5f19d387a496b30
parent950eaf6230496585e72ebb965c458d35c6c7eac1 (diff)
downloadu-boot-imx-7a086037071401ee781425c382846dddfe80df68.zip
u-boot-imx-7a086037071401ee781425c382846dddfe80df68.tar.gz
u-boot-imx-7a086037071401ee781425c382846dddfe80df68.tar.bz2
arm: mxs: Enable booting of mx28 without battery
Section 4.1.2 of Freescale Application Note AN4199 describes the configuration required to operate the mx28 from a 5V source without a battery. This patch changes the behaviour of the dropout control of the DC-DC converter (refer to section 11.12.9 of the mx28 Application Processor Reference Manual - Document Number: MCIMX28RM, Rev 2, 08/2013) to the following: - Always use 4P2 Linear Regulator if CONFIG_SYS_MXS_VDD5V_ONLY is defined - Switch between 4P2 Linear Regulator and Battery, using whichever has the highest voltage if CONFIG_SYS_MXS_VDD5V_ONLY isnot set (this is the same as the pre-patch behaviour) Signed-off-by: Graeme Russ <gruss@tss-engineering.com> Signed-off-by: Damien Gotfroi <dgotfroi@greenwatch.be>
-rw-r--r--arch/arm/cpu/arm926ejs/mxs/spl_power_init.c10
1 files changed, 8 insertions, 2 deletions
diff --git a/arch/arm/cpu/arm926ejs/mxs/spl_power_init.c b/arch/arm/cpu/arm926ejs/mxs/spl_power_init.c
index 7fb734e..c342217 100644
--- a/arch/arm/cpu/arm926ejs/mxs/spl_power_init.c
+++ b/arch/arm/cpu/arm926ejs/mxs/spl_power_init.c
@@ -14,6 +14,13 @@
#include "mxs_init.h"
+#ifdef CONFIG_SYS_MXS_VDD5V_ONLY
+#define DCDC4P2_DROPOUT_CONFIG POWER_DCDC4P2_DROPOUT_CTRL_100MV | \
+ POWER_DCDC4P2_DROPOUT_CTRL_SRC_4P2
+#else
+#define DCDC4P2_DROPOUT_CONFIG POWER_DCDC4P2_DROPOUT_CTRL_100MV | \
+ POWER_DCDC4P2_DROPOUT_CTRL_SRC_SEL
+#endif
/**
* mxs_power_clock2xtal() - Switch CPU core clock source to 24MHz XTAL
*
@@ -303,8 +310,7 @@ static void mxs_power_init_4p2_params(void)
clrsetbits_le32(&power_regs->hw_power_dcdc4p2,
POWER_DCDC4P2_DROPOUT_CTRL_MASK,
- POWER_DCDC4P2_DROPOUT_CTRL_100MV |
- POWER_DCDC4P2_DROPOUT_CTRL_SRC_SEL);
+ DCDC4P2_DROPOUT_CONFIG);
clrsetbits_le32(&power_regs->hw_power_5vctrl,
POWER_5VCTRL_CHARGE_4P2_ILIMIT_MASK,