summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorJohn Rigby <jcrigby@gmail.com>2010-01-25 23:12:57 -0700
committerTom Rix <Tom.Rix@windriver.com>2010-03-07 12:36:36 -0600
commit740d6ae5b982496fcea0666b2207cb34cc0e6015 (patch)
treebf4236cdc045593b1fb32679e45df497fa053410
parentcb17b92de03416cf4d5db5bd27ef4ae17f95e707 (diff)
downloadu-boot-imx-740d6ae5b982496fcea0666b2207cb34cc0e6015.zip
u-boot-imx-740d6ae5b982496fcea0666b2207cb34cc0e6015.tar.gz
u-boot-imx-740d6ae5b982496fcea0666b2207cb34cc0e6015.tar.bz2
fec_mxc: add MX25 support
Use RMII for MX25 Add code to init gasket that enables RMII Signed-off-by: John Rigby <jcrigby@gmail.com> CC: Ben Warren <biggerbadderben@gmail.com>
-rw-r--r--drivers/net/fec_mxc.c31
-rw-r--r--drivers/net/fec_mxc.h32
-rw-r--r--include/asm-arm/arch-mx25/clock.h1
3 files changed, 61 insertions, 3 deletions
diff --git a/drivers/net/fec_mxc.c b/drivers/net/fec_mxc.c
index e027894..5af9cdb 100644
--- a/drivers/net/fec_mxc.c
+++ b/drivers/net/fec_mxc.c
@@ -367,6 +367,34 @@ static int fec_open(struct eth_device *edev)
*/
writel(readl(&fec->eth->ecntrl) | FEC_ECNTRL_ETHER_EN,
&fec->eth->ecntrl);
+#ifdef CONFIG_MX25
+ udelay(100);
+ /*
+ * setup the MII gasket for RMII mode
+ */
+
+ /* disable the gasket */
+ writew(0, &fec->eth->miigsk_enr);
+
+ /* wait for the gasket to be disabled */
+ while (readw(&fec->eth->miigsk_enr) & MIIGSK_ENR_READY)
+ udelay(2);
+
+ /* configure gasket for RMII, 50 MHz, no loopback, and no echo */
+ writew(MIIGSK_CFGR_IF_MODE_RMII, &fec->eth->miigsk_cfgr);
+
+ /* re-enable the gasket */
+ writew(MIIGSK_ENR_EN, &fec->eth->miigsk_enr);
+
+ /* wait until MII gasket is ready */
+ int max_loops = 10;
+ while ((readw(&fec->eth->miigsk_enr) & MIIGSK_ENR_READY) == 0) {
+ if (--max_loops <= 0) {
+ printf("WAIT for MII Gasket ready timed out\n");
+ break;
+ }
+ }
+#endif
miiphy_wait_aneg(edev);
miiphy_speed(edev->name, CONFIG_FEC_MXC_PHYADDR);
@@ -513,7 +541,8 @@ static void fec_halt(struct eth_device *dev)
* Disable the Ethernet Controller
* Note: this will also reset the BD index counter!
*/
- writel(readl(&fec->eth->ecntrl) & ~FEC_ECNTRL_ETHER_EN, &fec->eth->ecntrl);
+ writel(readl(&fec->eth->ecntrl) & ~FEC_ECNTRL_ETHER_EN,
+ &fec->eth->ecntrl);
fec->rbd_index = 0;
fec->tbd_index = 0;
debug("eth_halt: done\n");
diff --git a/drivers/net/fec_mxc.h b/drivers/net/fec_mxc.h
index 6cb1bfc..5d0d69d 100644
--- a/drivers/net/fec_mxc.h
+++ b/drivers/net/fec_mxc.h
@@ -145,9 +145,17 @@ struct ethernet_regs {
uint32_t r_fdxfc; /* MBAR_ETH + 0x2DC */
uint32_t ieee_r_octets_ok; /* MBAR_ETH + 0x2E0 */
- uint32_t res14[6]; /* MBAR_ETH + 0x2E4-2FC */
-
+ uint32_t res14[7]; /* MBAR_ETH + 0x2E4-2FC */
+
+#ifdef CONFIG_MX25
+ uint16_t miigsk_cfgr; /* MBAR_ETH + 0x300 */
+ uint16_t res15[3]; /* MBAR_ETH + 0x302-306 */
+ uint16_t miigsk_enr; /* MBAR_ETH + 0x308 */
+ uint16_t res16[3]; /* MBAR_ETH + 0x30a-30e */
+ uint32_t res17[60]; /* MBAR_ETH + 0x300-3FF */
+#else
uint32_t res15[64]; /* MBAR_ETH + 0x300-3FF */
+#endif
};
#define FEC_IEVENT_HBERR 0x80000000
@@ -196,6 +204,26 @@ struct ethernet_regs {
#define FEC_ECNTRL_RESET 0x00000001 /* reset the FEC */
#define FEC_ECNTRL_ETHER_EN 0x00000002 /* enable the FEC */
+#ifdef CONFIG_MX25
+/* defines for MIIGSK */
+/* RMII frequency control: 0=50MHz, 1=5MHz */
+#define MIIGSK_CFGR_FRCONT (1 << 6)
+/* loopback mode */
+#define MIIGSK_CFGR_LBMODE (1 << 4)
+/* echo mode */
+#define MIIGSK_CFGR_EMODE (1 << 3)
+/* MII gasket mode field */
+#define MIIGSK_CFGR_IF_MODE_MASK (3 << 0)
+/* MMI/7-Wire mode */
+#define MIIGSK_CFGR_IF_MODE_MII (0 << 0)
+/* RMII mode */
+#define MIIGSK_CFGR_IF_MODE_RMII (1 << 0)
+/* reflects MIIGSK Enable bit (RO) */
+#define MIIGSK_ENR_READY (1 << 2)
+/* enable MIGSK (set by default) */
+#define MIIGSK_ENR_EN (1 << 1)
+#endif
+
/**
* @brief Descriptor buffer alignment
*
diff --git a/include/asm-arm/arch-mx25/clock.h b/include/asm-arm/arch-mx25/clock.h
index b0752e7..c59f588 100644
--- a/include/asm-arm/arch-mx25/clock.h
+++ b/include/asm-arm/arch-mx25/clock.h
@@ -30,6 +30,7 @@ ulong imx_get_perclk(int clk);
ulong imx_get_ahbclk(void);
#define imx_get_uartclk() imx_get_perclk(15)
+#define imx_get_fecclk() (imx_get_ahbclk()/2)
#endif /* __ASM_ARCH_CLOCK_H */